Hybrid solutions - Viessmann solutions Heating systems ... In hybrid appliances, two independent...

Hybrid solutions

Heating systems

Industrial systems

Refrigeration systems

2/3

Heating with hybrid appliances – future safety included

There are many approaches towards energy and heating solutions, and the decision for one or the other heating system is not easy. What we do know though, is that the prices for fossil fuels and electricity are subject to considerable long-term fluctuations. It is therefore good when you don’t have to commit to just one single energy source for your heating, but can be future-safe with a hybrid solution.

The future-safe energy mix in oneIn hybrid appliances, two independent heat generators are integrated into one unit: a gas or oil condensing boiler combined with an electrical heat pump. This energy mix combines “renewable” with “highly efficient”, and the user receives the maximum freedom of being able to use the least-expensive energy source. Exactly according to the respective situation on the energy market, the control can be set so that when there are fluctuating energy prices, the most cost-effective and efficient operating method is selected.

Highly efficient and renewable at the same timeRegenerative heat from the environment saves valuable resources and reduces CO2 emissions. Combined with a highly efficient condensing boiler from Viessmann, you can rely at all times on energy-reduced, economical operation.

In this brochure we not only inform you about the flexibility and security provided by a gas or oil hybrid appliance from Viessmann, but also about their possible uses in the modernisation of already existing condensing boilers.

Hybrid compact appliances from Viessmann:the future-safe energy mix in one appliance

Hybrid compact appliances combine two energy sources in one appliances: Highly efficient with a modern condensing boiler for gas or oil. Renewable due to free ambient heat with a heat pump.

These days, if you want to be independent of energy providers when heating, you can’t rely on just one single energy source. The best solution for this is using a heating method that provides the highest possible level of flexibility while at the same time using several energy sources – with hybrid compact appliances from Viessmann.

Always set for savingsThe hybrid appliances from Viessmann combine the benefits of a heat pump with those of a high-efficiency condensing boiler. You therefore achieve an optimal mix in consumption between regenerative energies and conventional energy sources. The intelligent control can be set individually in such a way that the more efficient heat generator is always selected. In other words, the source that is cheapest for the operator. Constantly fluctuating energy prices are thereby taken out of the equation.

Vitotronic 200 control with

Hybrid Pro Control

energy manager

Heat pump

Oil condensing boiler

Gas condensing boiler

Modern heating: free energy from the environment

with a heat pump plus condensing boiler for gas or oil.

And all perfectly controlled by the Vitotronic 200 with the

Hybrid Pro Control energy manager.

Hybrid compact

appliances

Free choice of energy source: gas or oilViessmann hybrid compact appliances not only combine efficient heat pump technology with tried-and-tested gas condensing boiler technology, such as in the Vitocaldens 222-F, but also with oil in the Vitolacaldens 222-F. Using the innovative Vitolacaldens 222-F hybrid compact appliances, you have a future-proof solution for heating modernisation with oil. Because you profit from economical oil technology and always have a cost-effective alternative when energy prices fluctuate.

Take advantage of these benefits

Future-proof heat supply by use of two heat generators in one appliance

Automatic determination of the most efficient operating mode

Prepared for SmartGrid and consumption of self-produced electricity from a photovoltaic system

Always according to the respective requirements for operation with gas or oil

Also for retrofitting

on stainless-steel heat exchanger for

oil/gas condensing boilers up to 150 kW

10-year warranty*

4/5

Condensing boilers for gas or oil with the stainless steel

Inox-Radial heat exchanger: sustainable and efficient

The condensing boiler: efficiency also through use of stainless-steel heat ex-changersCondensing boiler technology provides one of the most efficient types of heat generation. The reason: This heating technology not only recovers heat from burning oil and gas. It also uses the residual heat in the flue gas for heating – heat that is normally lost in the chimney when using traditional boilers.

With condensing boilers from Viessmann, the stainless steel Inox-Radial heat exchangers ensure that the flue gases cool down so much before being discharged to the chimney that the water vapour contained in it can be specifically condensed, and the released heat is additionally transferred to the heating system. Condensing boilers therefore achieve a standard degree of utilization of up to 98 percent and are especially energy-saving in operation.

Free ambient heat used extremely

efficiently: the heat pump in the

hybrid compact appliances

* Requirements and

overview of products at

www.viessmann.de/garantie

The heat pump: efficiency by using free ambient heatFree ambient heat is used by the heat pump extremely efficiently, so it can easily cover the basic load when the system is running. The outdoor unit thereby withdraws the heat contained in the air and brings it to a flow temperature of 55 °C by the heat pump process. And: heat pumps from Viessmann are especially silent and low in vibration, the compressor unit is low-maintenance and designed for reliable operation and a long service life.

Control

Which energy source is the cheapest?That is easily controlled – completely automatically

The Vitocaldens 222-F and Vitolacaldens 222-F hybrid compact appliances and the split air/water Vitocal 250-S heat pump are equipped with the Vitotronic 200 control. The intelligent Hybrid Pro Control energy manager is already integrated.

Normally, heating systems are controlled based either on the room or the outside temperature. The intelligent Hybrid Pro Control energy manager goes beyond this and controls the system with variable settings. The operator can define these individually and change them at any time:

Energy prices CO2 emissions Consumption of self-produced electricity Energy efficiency Heat requirement

Hybrid Pro Control: the right energy mix for efficient operationFor instance, thanks to Hybrid Pro Control, the control detects when the heat pump is able to cover the entire heat requirement. If this is exceeded, then it requires support from the fuel value module. Hybrid Pro Control automatically determines this time and reacts accordingly: after the current energy costs have been entered for electricity, gas or oil, it calculates which energy source can be currently used most efficiently. Hybrid Pro Control always has an overview of the complete system. The integrated energy manager automatically determines the most efficient operating mode (economy or ecology and comfort).

The system can always be viewed

when on the road using the

ViCare app

6/7

Well-priced or environmentally friendly? Always convenient for sure!As the operator, you have the choice: the heating system can either function with maximum environmental friendliness or in an especially cost-effective manner. Just make the setting: Hybrid Pro Control does the rest.

1. Economy mode – save up to 40 percent heating costsIt couldn’t be more economical: in economy mode, up to 40 percent of the heating costs can be saved, depending on the energy prices and the system design.

2. Ecology mode – a gain for the environmentThe gain for the environment: in this setting, the system functions with the lowest CO2 emission per kWh of generated heat energy.

Always convenient for sure!Irrespective of whether economy or ecology mode has been selected, the “Convenience mode” activates the priority for water heating.

Hybrid Pro Control takes care of everything. Even self-generated electricity using photovoltaicsWhen calculating the cheapest operating method, the Hybrid Pro Control energy manager even takes self-generated electricity from a photovoltaic system into consideration.

On the road or at home: everything is always in control!Even when you are on the road, you have access at all times to your heating and can intervene in its control – using the comfort of the Internet. Via smart phone or tablet PC, the free Vitotrol Plus app provides you with secure and easy access.

Intelligent energy management, for instance with

Vitocaldens 222-F: Hybrid Pro Control calculates the outside

temperature at which the heat pump can cover the heat

requirement. Depending on the current electricity price and

with a view towards the highest possible level of efficiency.

-4 °C -2 °C 0 °C +4 °C

Gas price8 ct/kWh

100%

90%

20%

100%

100%

-4 °C -2 °C 0 °C +4 °C

Outside

temperature

Gas price6 ct/kWh

70%

80%

80%

Heat pump electricity price 0.21 €/kWh

Outside

temperature

Gas or oil hybrid

compact appliance

8/9

VITOCALDENS 222-FVITOLACALDENS 222-F

Constantly fluctuating energy prices make it difficult for the consumer to make the right decision for a heating solution that is both economical and ecological at the same time, and that will endure tomorrow. The hybrid compact appliances now provide a future-proof solution for the modernisation of heating systems.

Energy efficiency label for

Vitolacaldens 222-F

High level of operational safety due to two independently operating heat generators Low operating costs by use of the cheapest energy source in each case Compact dimensions of the indoor unit in kitchen grid dimensions Integrated 100- or 130-litre DHW cylinder Future-proof and flexible solution by use of time-variable power tariffs High level of DHW convenience due to condensing peak load boiler Integrated energy-saving high-efficiency pumps Prepared for on-site consumption of photovoltaic current and SmartGrid


Viessmann combines high-efficiency condensing boiler technology with the use of free ambient heat. With the two hybrid compact appliances, the optimum mix of regenerative and conventional energy sources is possible.

Gas or oil: modernisation with future guarantee Irrespective of whether you previously heated using gas or oil – Viessmann provides efficient hybrid compact appliances for both energy sources. Compact dimensions. Powerful for pleasant heating and DHW convenience. And above all, due to the two independent heat generators in the appliance – condensing boiler and heat pump – flexible enough to also be able to react optimally in the future to developments on the energy markets. You can always rely on their efficiency. For instance, the Vitolacaldens 222-F has been classified with energy efficiency label stage A++.

12

3

4

56

7

8

9

Hybrid compact

appliances

Indoor unit

VITOCALDENS 222-F/VITOLACALDENS 222-F1.3 to 19 kW/1.3 to 23.5 kW

Vitolacaldens 222-F (left)

1 Oil condensing module with Inox-Radial heat exchanger surface and modulating compact blue flame burner

2 Condenser3 Vitotronic control with Hybrid Pro Control

energy manager4 High-efficiency heating circuit pump5 DHW loading pump6 3-way reversing valve7 Heat exchanger for loading system8 100-litre domestic water primary cylinder

(Vitolacaldens 222-F), 130-litre DHW loading cylinder (Vitocaldens 222-F)

Vitocaldens 222-F(right)

9 Gas condensing boiler with Inox-Radial heat exchanger surface and modulating MatriX cylinder burner

Heat efficiently using gas or

ambient heat: gas hybrid compact

appliance Vitocaldens 222-F

10

11 12

10/11Hybrid compact appliances

Outdoor unit

The right unit for everyone: hybrid appliances for gas and oil Hybrid compact appliances from Viessmann are available for both oil and gas: the Vitocaldens 222-F for gas and the Vitolacaldens 222-F for oil. The heat from both appliances is ensured by a powerful condensing boiler and a heat pump. Both systems alternate with each other or supplement each other. Your heating thereby decides automatically which system is more economical or eco-friendly for heating, according to the currently-entered energy prices. Depending on the operating method you have previously set.

No wish left unfulfilled: DHW convenience with integrated loading cylinder The DHW loading cylinder with 130-litre volume for gas or 100-litre for oil always provides sufficient hot water – even when the demand is high. In the ideal case, the hot water is generated cost-efficiently with the heat pump.

Outdoor unit

10 Evaporator11 Fan12 Compressor

Future-proof, economical heating by

levering two heating technologies

Compact, convenient, efficient: indoor and outdoor unitsTwo heat generators, water heaters and all the hydraulic components are integrated into the indoor unit – with a footprint of just 0.36 square metres. The watertight outdoor unit can be set up flexibly. Thanks to its compact dimensions, it can be freely erected as required or mounted onto the outer walls.

Split air/water

heat pump

12/13

VITOCAL 250-S

Supplementing a heating system for gas or oil with a heating system is ideal. Not just to be future-safe, but also to be environmentally friendly. On the one hand, you therefore use free ambient heat. On the other hand, the heating system can be operated so that the lowest heating costs are always achieved when there are fluctuating energy prices.

Choose economy – and future-safety Heating systems with an already existing oil or gas condensing boiler up to an output of 30 kW can be retrofitted with Vitocal 250-S. The Hybrid Pro Control energy manager controls the efficiency of the complete system. Depending on the reference variable selected and according to the current energy costs, either the condensing boiler or the split air/water heat pump provides the heating. Energy efficiency label for

Vitocal 250-S, HAWB-AC 252.A10


Attractively-priced retrofitting of existing heating systems with a heat pump High level of operational safety due to two independently operating heat generators Greater level of independence from fossil fuels and fluctuating energy prices Lowering of heating costs by the use of free environmental energy Higher level of efficiency and efficient energy utilisation CO2-reduced heat generation Prepared for on-site consumption of photovoltaic current and SmartGrid Integrated Vitotronic 200 control with Hybrid Pro Control energy manager automatically determines

the most efficient operating method for the selected operating mode

Heat and cool with one systemIf the heat pump does the heating, the out-door unit withdraws the heat contained in the air and brings it to a flow temperature of 55 °C by the heat pump process. But the heat pump can do a lot more. For a high level of living comfort on a hot summer’s day, operation of the heat pump can be reversed. Living areas can then be kept comfortable cool. Inverter-controlled compressors and an electronic expansion valve in the refrigeration circuit also ensure a high level of efficiency here.

Viessmann also provides the right system for retrofitting of existing condensing boilers using free ambient heat: split air/water heat pump Vitocal 250-S for combination with a wall-mounted or freestanding condensing boiler.

1

23

4

5

6

Ideal for retrofitting existing condensing boilers:

the Vitocal 250-S split air/water heat pump covers up to 80 %

of the energy required in a detached house using free

ambient heat and electricity.

Vitocal 250-S

1 Flow monitor 2 Condenser3 High-efficiency circulation pump4 3-way mixer5 Heating circuit/domestic hot

water reversing valve6 Vitotronic 200 control with Hybrid

Pro Control energy manager

Split air/water

heat pump

VITOCAL 250-S3.0 to 11.3 kW

14/15

Vitotronic 200 control with Hybrid

Pro Control: very conveniently

select between operating methods –

especially economical or especially

friendly to the environment

The split air/water heat pumpVitocal 250-S supplements already existing freestanding or wall-mounted oil or gas condensing boilers up to 30 kW. Depending on its size, the heat pump itself already outputs up to 11.3 kW. It therefore economically provides the greatest part of the annual heating load – in a detached house, up to 80 percent of the energy required for heating and hot water can therefore already be covered by free ambient heat and electricity.

Hybrid Pro Control: the right energy mix ensures the highest level of efficiency The Vitotronic 200 control with the Hybrid Pro Control energy manager controls both the heat pump and the condensing boiler. To do this, first select the operating mode with the lowest operating costs or the lowest CO2 emissions. Depending on the mode you select, the prices entered for oil or gas and electricity, or the respective primary energy factor, are used. According to the output requirements, Hybrid Pro Control optimally adjusts the Vitocal 250-S and the existing heat generators and automatically controls the energy mix.

Easily and quickly retrofittedWith a width of just 450 mm, the compact indoor unit can even be installed in tight spaces or is simply fixed to the wall. Lateral clearance is not required – all components required for maintenance are accessible from the front. The outdoor unit is connected via the refrigerant lines to the indoor unit.

Control conveniently with an app The complete system can be controlled very conveniently via the Internet – the app for this is available for free for smart phones and tablets.

Use of free ambient heat for

heating: the outdoor unit withdraws

the heat contained in the air.

Even more efficient by consumption of self-produced electricity Vitocal 250-S is standard-designed for use of self-produced electricity from a photovoltaic system. The projected power curve of the photovoltaic system and the heat requirement are automatically taken into consideration. If an electricity storage system is then also integrated into the system, the electricity supply from the grid is reduced to a minimum – that makes it independent of increasing electricity prices.

Technical data Hybrid compact appliances

Vitocaldens 222-F gas hybrid compact appliance (Heating)

Vitocaldens 222-FVoltage

TypeV

HAWB-M 222.A23230

HAWB-M 222.A26230

HAWB-M 222.A29230

HAWB 222.A29400

Rated thermal outputHeat pump moduleas per EN 14511, A2/W35 °C as per EN 14511, A-7/W35 °COutput controlas per EN 14511, A2/W35 °C

kWkW

kW

3.03.2

2.0 – 3.8

5.66.6

1.3 – 7.7

7.78.7

4.4 – 9.9

7.59.5

2.7 – 10.9

Rated thermal output range Gas condensing boiler module50/30 °C80/60 °C

kWkW

3.2 – 19.02.9 – 17.2

3.2 – 19.02.9 – 17.2

3.2 – 19.02.9 – 17.2

3.2 – 19.02.9 – 17.2

Refrigerant circuitRefrigerant– Refrigerant charge– Global warming potential (GWP)– CO2 equivalent

kg

t

R410A1.20

20882.51

R410A2.15

20884.50

R410A2.95

20886.20

R410A2.95

20886.20

Dimensions of indoor unitLength (depth)WidthHeight

mmmmmm

595600

1625

595600

1625

595600

1625

595600

1625

Weight of indoor unitWeight of outdoor unit

kgkg

14443

14466

148110

148113

Cylinder capacity l 130 130 130 130

DHW output kW 17.2 17.2 17.2 17.2

Energy efficiency class*DHW heating:Draw-offEnergy efficiency class

A++/A+

LA

A++/A+

LA

A++/A+

LA

A++/ A++

LA

* Energy efficiency class compliant with EC Regulation No. 811/2013 Heating,

average climate conditions for low-temperature use LT (35 °C)/medium-temperature use MT (55 °C)

Vitocaldens 222-FVoltage

TypeV

HAWB-M-AC 222.A26230

HAWB-M-AC 222.A29230

HAWB-AC 222.A29400

Rated thermal outputHeat pump moduleas per EN 14511, A2/W35 °C as per EN 14511, A-7/W35 °COutput controlas per EN 14511, A2/W35 °C

kWkW

kW

5.66.6

1.3 – 7.7

7.78.7

4.4 – 9.9

7.59.5

2.7 – 10.9

Cooling output dataas per EN 14511 (A35/W18 °C, 5 K spread)Rated cooling capacityCoefficient of performance (EER) in cooling mode

kW 8.8

3.35

10.0

3.57

8.8

4.46

Rated thermal output range Gas condensing boiler module50/30 °C80/60 °C

kWkW

3.2 – 19.02.9 – 17.2

3.2 – 19.02.9 – 17.2

3.2 – 19.02.9 – 17.2


kg

t

R410A2.15

20884.50

R410A2.95

20886.20

R410A2.95

20886.20


mmmmmm

595600

1625

595600

1625

595600

1625


kgkg

14466

148110

148113

Cylinder capacity l 130 130 130

DHW output kW 17.2 17.2 17.2


A++/A+

LA

A++/A+

LA

A++/ A++

LA

Vitocaldens 222-F gas hybrid compact appliance (Heating and cooling)

16/17

Vitocaldens 222-F oil hybrid compact appliance (Heating)

Heat pump for hybrid appliance Vitocal 250-S split air/water heat pump (Heating and cooling)

Vitolacaldens 222-FVoltage

TypeV

HAWB-M 222.A30230

HAWB-M 222.A33230

HAWB 222.A33400

Nenn-WärmeleistungWated thermal outputHeat pump moduleas per EN 14511, A2/W35 °C as per EN 14511, A-7/W35 °COutput controlas per EN 14511, A2/W35 °C

kWkW

kW

5.66.6

1.3 – 7.7

7.78.7

4.4 – 9.9

7.59.5

2.7 – 10.9

Rated thermal output range Oil condensing boiler module50/30 °C80/60 °C

kWkW

10.3 – 23.59.6 – 22.0

10.3 – 23.59.6 – 22.0

10.3 – 23.59.6 – 22.0


kg

t

R410A2.15

20884.50

R410A2.95

20886.20

R410A2.95

20886.20


mmmmmm

595600

1625

595600

1625

595600

1625


kgkg

16066

164110

164113

Cylinder capacity l 100 100 100


A++/A+

LA

A++/A+

LA

A++/A++

LA

Vitocal 250-S, Type HAWB-M-ACVitocal 250-S, Type HAWB-AC

252.A04 252.A05 252.A07 252.A10252.A10 252.A13 252.A16

Heating output dataas per EN 14511 (A2/W35 °C) Rated thermal outputCoefficient of performance (COP) in heating modeOutput control

kW

kW

3.03.3

2.0 – 3.8

3.73.5

1.3 – 6.5

5.63.24

1.3 – 7.7

7.73.5

4.4 – 9.9

7.54.27

2.7 – 10.9

9.13.7

3.3 – 12.3

11.33.7

4.6 – 13.4

Heating output dataas per EN 14511 (A7/W35 °C, 5 K spread)Rated thermal outputCoefficient of performance (COP) in heating mode

kW 4.54.64

5.44.79

8.44.28

10.94.62

10.25.08

12.14.69

15.54.10

Cooling output dataas per EN 14511 (A35/W18 °C, 5 K spread)Rated cooling capacityCoefficient of performance (EER) in cooling mode

kW 4.23.72

6.3 4.14

8.8 3.35

10.03.57

8.84.46

12.83.72

14.23.43


kg

t

R410A1.20

20882.51

R410A2.15

20884.50

R410A2.15

20884.50

R410A2.95

20886.20

R410A2.95

20886.20

R410A2.95

20886.20

R410A4.20

20888.80

Dimensions of outdoor unitOverall length (depth)Overall widthOverall heightDimensions of indoor unitOverall length (depth)Overall widthOverall height

mmmmmm

mmmmmm

290869610

360450905

3401040865

360450905

3401040865

360450905

340975

1255

360450905

340975

1255

360450905

340975

1255

360450905

340975

1255

360450905

Total weightOutdoor unitIndoor unit HAWB-M-AC/HAWB-AC

kgkg

4360

6660

6660

11065

11365

11365

12165

Energy efficiency class* A++/A+ A++/A+ A++/A+ A++/A+ A++/A++ A++/A++ A++/A++

* Energy efficiency class compliant with EC Regulation No. 811/2013 Heating,

average climate conditions for low-temperature use LT (35 °C)/medium-temperature use MT (55 °C)

System technology Everything from a single source

The convenient controls and the perfectly matched system technology from Viessmann provide you with maximum reliability, flexibility and efficiency.

Perfectly matched: system technology

“The whole is more than the sum of its parts.” According to this motto, Viessmann doesn’t just offer single heating components that meet Viessmann’s high standards of quality, reliability and efficiency. Rather, all products are incorporated into a completely coordinated system in which all components match each other. Because only a perfect interplay of system-integrated components exhausts the entire performance potential of innovative leading-edge technology.

Viessmann system technology includes everything that constitutes a reliable and economic heating system.

The Vitotronic control with radio remote control and the powerful Vitocell DHW cylinder for best DHW convenience, right up to high-quality photovoltaic systems for power generation.

2

1 Gas hybrid compact appliance 2 Photovoltaic system 3 Outdoor unit

3

Gas hybrid compact appliances or

Vitocal 250 S: at Viessmann, all

system components are perfectly

matched to each other.

1

18/19

Easy-to-useClear, convenient, intelligent: the Vitotronic control is designed logically and comprehensibly. It ensures perfect functions for fast and exact control of your heating system.

PhotovoltaicsMake the sun into your energy supplier for electricity. That pays, because solar power can be produced much cheaper now than the delivery costs of power from the grid.

System accessoriesRadiators, pumps, expansion vessels, piping systems, filter and valves – the Vitoset program provides you with a complete heating solution. Your advantage: Everything fits together and can be implemented according to your individual requirements using just one system. And with high-quality, tested materials and perfectly manufactured.

Additional information on the Viessmann accessories is available here.

ConnectivityWith Vitoconnect 100 and a smartphone, controlling Viessmann heating systems couldn't be easier. With the ViCare app, you can control simple heating systems. The Vitotrol Plus app allows you to remotely operate complicated heating systems (e.g. with floor heating and solar installations). All apps are available for mobile terminal devices with iOS or Android operating systems.

Service Our specialist partners

Our close cooperation with our specialist partners is the basis for success for Viessmann. You also profit from their knowledge, when you decide on heating equipment from Viessmann.

In the best hands of our specialist partners

You receive consultation, sales, assembly and customer service exclusively from Viessmann’s trade partners, who we train regularly and who have a thorough knowledge of our products. Profit from the extensive range of service of our specialist partners!

German TÜV-certified: the building energy-savings check from Viessmann With the building energy-savings check, individual possibilities for modernisation and savings can be easily and quickly determined. With total objectivity. Because the calculation in this program is certified by the TÜV Rheinland, Germany. Take the quick check at www.check-energiesparen.de. Your specialist engineering company will then advise you in detail.

20/21

Conditions that are really something specialThose investing in a new heating system for their property receive a favourable financing offer from Viessmann in cooperation with the Creditplus Bank: just 3.99 percent* effective annual interest.

* For a runtime of 24 months

Attractive financing: invest now and save heating costsWith the financing model from Viessmann, you can start saving immediately and achieve your plans. Our unbureaucratic, fast and reliable handling facilitates your modernisation, and you remain flexible in your financial planning. Your special advantage: with Viessmann’s favourable conditions, heating-cost savings are normally much higher than your costs of financing.

Please note: The subsidy and financing applications must be made before purchase of the heating and/or solar system. A subsequent subsidy or financial agreement is not possible. You can get detailed information on the Viessmann financing model from your local trade partner.

A glance at some examples of the service you receive from your trade partner Free, non-binding and individual consultation,

even directly on-site Clear calculation of the savings in heating

costs by modernisaiton of your heating system – naturally also combined with solar collectors

Calculation of the amortisation time after which the heating has paid for itself due to energy cost savings

Determination of the actual heat and DHW requirement for your household or property

Information on the economic combination of new heating and solar systems for backup heating and DHW heating

Current information on state subsidy programmes from which your new heating and solar system can be subsidised

Support when applying for subsidies

Your cost advantage: technology from Viessmann, subsidies from the stateWith heating systems from Viessmann, you don’t just save on operating costs. Energy-saving, environmentally-friendly heating technology is financially supported at the national, federal and local level as well as by energy providers. Inform yourself there-fore about the various subsidy programmes. Current information on this is available on the Internet at www.viessmann.de/foerderprogramme

The economic efficiency analysis for your home:

the building energy savings check is available at

www.check-energiesparen.de.

Viessmann Group

22/23

Viessmann Group

Energy Efficiency Award

The company

The comprehensive product range from the Viessmann Group Boilers for oil or gas Combined heat and power generation Hybrid appliances Heat pumps Wood combustion technology Biogas production plants Biogas upgrading plants Solar thermal Photovoltaics Accessories Refrigeration systems

Company details Established in: 1917 Employees: 11,600 Group turnover: 2.22 billion euros Export share: 56 percent 22 production companies in 11 countries 74 countries with sales companies and

branches 120 sales offices worldwide

German Sustainability Award for

Production/Brand/Resource

Efficiency

Viessmann is one of the leading international manufacturers of efficient heating, industrial energy and refrigeration systems.

Acting in a sustainable mannerAs a family business Viessmann takes the long view and places great value on acting responsibly; sustainability is firmly enshrined in the company's principles. For Viessmann, sustainability in action means striking a balance between economy, ecology and social responsibility throughout the company; meeting current needs without compromising the quality of life of future generations.

With its strategic sustainability project, Viessmann demonstrates at its own head office in Allendorf (Eder) that the energy and climate policy goals set by the German government for 2050 can in fact be achieved today with the help of commercially available technology.

The Viessmann comprehensive rangeAs environmental pioneer and technological trailblazer for the heating sector, Viessmann has for decades been supplying exceptionally clean and efficient systems for heating, refrigeration and decentralised power generation. Many of the company's developments are recognised as heating equipment milestones.

Practical partnershipAs part of its comprehensive range, Viessmann also offers a wide selection of complementary services. These services include a comprehensive training and further development programme for trade partners at the well equipped training facilities of the Viessmann Academy.

With its new digital services, Viessmann offers innovative solutions such as the operation and monitoring of heating systems by smartphone. Users benefit from greater reassurance and convenience, whilst contractors can keep a constant eye on the systems for which they are responsible.

9442 830 - 1 GB 02/2017

Copyright protected content

Duplication and alternative use only with prior written consent.

Subject to modifications.

Your trade partner:

Viessmann Werke GmbH & Co. KG35107 Allendorf (Eder)Telephone +49 (0)6452 70-0Fax +49 (0)6452 70-2780www.viessmann.com

Hybrid solutions - Viessmann solutions Heating systems ... In hybrid appliances, two independent...

Documents

Transcript of Hybrid solutions - Viessmann solutions Heating systems ... In hybrid appliances, two independent...