HUSKY 100 Reliable and highly versatile hardware · Reliable and highly versatile hardware using...
Transcript of HUSKY 100 Reliable and highly versatile hardware · Reliable and highly versatile hardware using...
4 54 5
Reliable and highly versatile hardware using precision-made components for trouble-free operation.
Order KITS based on material and length of track:Kit No. Material Max Leaf SizeH100/6 steel track/6 ft. 96" x 36" x 2"H100/8 steel track/8 ft. 96" x 48" x 2"H100A/6 aluminum track/6 ft. 96" x 36" x 2"H100A/8 aluminum track/8 ft. 96" x 48" x 2"
OPTIONAL EXTRAS include:2815 281 brackets - 5 each287 track stop (bumper type)285 hanger for metal doors106R/94 roller guide (use w/94A)94A aluminum floor channel
F134 aluminum fascia - 1-3/4" thick doorsF138 aluminum fascia - 1-3/8" thick doors863 iron bow handle (5-1/4" x 1-3/4")400 aluminum flush pull (4-1/4" x 1-7/8", 5/8" mortise)414 aluminum flush pull (5-1/4" x 2-1/2", 3/4" mortise)333 aluminum flush bolt (6" x 1-3/8")
KITS (complete, ready to install) include:1 ea 280 or pre-drilled track, in steel or 280A aluminum, 6 or 8 foot lengths2 ea 284N nylon bodied, acetal wheel hangers1 ea 102N nylon guide2 ea 601H clip stops(Kit components can be ordered individually)
FOR SLIDING WOOD DOORS TO 100 lbs.
FACE FIXED SOFFIT FIXED
HUSKYSLIDING100
516"3
(84.1)
15 16"(33.3)
New 2802A Bypass Track for Husky Sliding Door Hardware
100 lbs.max door weight
281 (optional)
284N
102N9/16"
3/16"
3/4"
3-1/16" MAX2-5/8" MIN
1/2" MIN
96" MAX
280
284N
102N
F134Aluminum
Fascia(optional)
2-9/16"
1-3/16"
280A
284N
94A(optional)
106R/94(optional)
1/4"
2-1/4" MAX1-7/8" MIN
1"
1/4"
* F138 Fascia also available for 1-3/8" doors. Dimensions are 7/16" x 2-9/16"h.
280
HARDWARE PACK (no. "H100PACK") = KIT w/o track:2 ea 284N nylon bodied, acetal wheel hangers1 ea 102N nylon guide2 ea 601H clip stops
BYPASS PACK ALSO AVAILABLE (no. "HBP100PACK")
4 54 5
Reliable and highly versatile hardware using precision-made components for trouble-free operation.
Order KITS based on material and length of track:
Kit No. Material Max Leaf SizeH200/6 steel track/6 ft. 96" x 36" x 2"H200/8 steel track/8 ft. 96" x 48" x 2"H200A/6 aluminum track/6 ft. 96" x 36" x 2"H200A/8 aluminum track/8 ft. 96" x 48" x 2"
OPTIONAL EXTRAS include:2815 281 brackets - 5 each287 track stop (bumper type)285 hanger for metal doors106R/94 roller guide (use w/94A)94A aluminum floor channel
F134 aluminum fascia - 1-3/4" thick doorsF138 aluminum fascia - 1-3/8" thick doors863 iron bow handle (5-1/4" x 1-3/4")400 aluminum flush pull (4-1/4" x 1-7/8", 5/8" mortise)414 aluminum flush pull (5-1/4" x 2-1/2", 3/4" mortise)333 aluminum flush bolt (6" x 1-3/8")
KITS (complete, ready to install) include:1 ea 280 or pre-drilled track, in steel or 280A aluminum, 6 or 8 foot lengths2 ea 284 nylon bodied, needle bearing, acetal wheel hangers1 ea 102N nylon guide2 ea 601H clip stops(Kit components can be ordered individually)
FOR SLIDING WOOD OR METAL DOORS TO 200 lbs.
HUSKYSLIDING 200
516"3
(84.1)
15 16"(33.3)
New 2802A Bypass Track for Husky Sliding Door Hardware
FACE FIXED SOFFIT FIXED
200 lbs.max door weight
284
1/4"
3-1/16" MAX2-5/8" MIN
96" MAX
280
281 (optional)3/4"
1/2" MIN
102N9/16"
3/16"
2-1/4" MAX1-7/8" MIN F134
AluminumFascia
(optional)
2-9/16"
1-3/16"
280A
284
94A(optional)
106R/94(optional)
1/4"
* F138 Fascia also available for 1-3/8" doors. Dimensions are 7/16" x 2-9/16"h.
284
280
102N
1"
HARDWARE PACK (no. "H200PACK") = KIT w/o track:2 ea 284 nylon bodied, needle bearing, acetal wheel hangers1 ea 102N nylon guide2 ea 601H clip stops
BYPASS PACK ALSO AVAILABLE (no. "HBP200PACK")
6 76 7
GLASS WEIGHT
5/16" glass 3.95 lbs./sq. ft.3/8" glass 5.05 lbs./sq. ft.
Glass8-10 mm(5/16"-3/8")
Track280A
AntiLift Stop
Hanger 284D
ClipStop601H
Glass ClampLockNut
Guide608/610
(39.6)1916(25.4)
1
10mm (3/8") Only ForFixed Panel
(69.8)23 4
(41.3)15 8
1516
15 16
(95.3)33 4
FasciaF136
(57.2)21 4
(120.7)43 4
11 16 1
HUSKY GLASS
CAPACITY
Max. door weight: 165 lbs. (75kg) Max. door height: 7'10" (2400mm) Max. door width: 4'1" (1250mm)
Glass thickness: 5/16" (8mm) and 3/8" (10mm)
TECHNICAL INFORMATION
Track: 280A (extruded aluminum) Available in 6', 8', and 12' lengths
Brackets: Face fix 281 5-pack 2815Fascias: Soffit fixed track F136 Glass Clamp Kits: For glass panels from 5/16" (8mm) up to 8/75/1 Kit - 8mm 3/8" (10mm) 10/75/1 Kit - 10mm Guides: 5/16" (8mm) glass panels 608 - glass guide 3/8" (10mm) glass panels 610 - glass guide
Accessories: 601H retaining stop mounted within the track
APPLICATIONS
Husky offers a solution to lightweight glass applications such as office doors and small glass partitions.
DOOR TYPES
Glass panels of 5/16" (8mm) or 3/8" (10mm) thick-ness in tempered or laminated glass.
Glass Clamp kits contain: 2 hangers, 2 clamps, 2 end track stops and 2 floor mounted guides.
Note: When using glass clamps in combination with protective coatings for glass surfaces such as Clear Shield, ensure that the glass surface to be clamped is not treated with the Clear Shield coating.
6 76 7
PACER STRAIGHT SLIDING FOR TOP-HUNG WOOD AND METAL DOORS
Hanger57B
Hole 9mm
Bracket1B
FasciaF200
Channel94A
Roller Guide106N/94
Track 600
Hanger 56BX
AdjustmentNut
AdjustmentNut
RemovableRoller Guide104NX/94
RemovableRoller Guide
104N/94
PatentWasher
Channel94A
Hanger 56B
FasciaF160
Lock Nut
Lock Nut
(3/8")
(71.4)213 16
(30.1)13 16
(52.3)21 16
(55.6)23 16
(190.5)71 2
(20.6)
13 16
(20.6)
13 16
(14.2)
9 16
(25.4)1
(14.2)
9 16
DoorThickness
(49.2)(34.9)113 8 1516
(49.2)(20.6)113 16 1516
(30.1)(20.6)113 16 3 16
(20.6)13 16
(9.5)
3 8(12.7)
1 2(4.7)
3 16
(11/16")
Hole Requiredfor Fixing Guide
is 17mm
( 7/16")
Hole Required 11mm
( 7/16")
Hole Required 11mm
(149.2)5 7 16
(11.1)
7 16DIA.
(20.6)
13 16DIA.
(4.7)
3 16
8 98 9
Bracket 1BClip Stop 601
Track 600
Hanger 57B
Hanger52B
Flush Pull 400
Flush Bolt F3715
Guide106N Channel 94A
(1049.3)415 16
(33.3)15 16 (33.3)
15 16
(33.3)173 4
(33.3)173 4
(500)1911 16
(1981.2)
66(500)
1911 16
57BHanger
56BHanger
56BXHanger
RetainingStop 601
52BHanger
CAPACITY
Max. door weight: 440 lbs. (200kg)
Max. door height: 9'10" (3000mm)
Door thickness: 13/8"-115/16" (35mm-50mm)
APPLICATIONS
Combining performance and style with versatility, Pacer straight sliding in wood, glass, aluminum or metal is ideally suited for shop-fronts, offices and other stylish interiors.
DOOR TYPES
Wood doors for interior applications can be either solid or glazed. Metal doors can be of angle or box section. Aluminum is dependent on extrusion profile.
TECHNICAL INFORMATION
Track: Aluminum 600A Available in 6', 8', 10', and 16' lengths
Brackets: Face fix 1B Jointing bracket 1BX
Fascias: Soffit fixed track F160 with standard return Face fixed track F200 with standard return Fascia comes in a satin anodized aluminum finish in lengths of 6', 8' and 10'
Hangers: Wood doors 57B - concealed fixing Wood doors 52B - angle plate fixing Aluminum/Metal doors 57B - concealed fixing Metal doors 56B - angle frame Metal doors 56BX - box frame
Guides: Wood/Aluminum/Metal doors 89/2N - floor mounted guide Wood/Aluminum doors 106N/94 - concealed fixing Metal doors 104N/94 - angle frame Metal doors 104NX/94 - box frame
Guide Channel: Brass 94 Aluminum 94A
94 channel available in 4'11" (1.5 meter) and 9'10" (3 meter) lengths. 94A channel available in 6', 8', and 12' lengths.
Accessories: Retaining stop mounted within the track 601P
8 98 9
PACER GLASS
GLASS WEIGHT
3/8" glass 5.05 lbs./sq. ft.1/2" glass 6.4 lbs./sq. ft.
TECHNICAL INFORMATION
Track: 600A 600CFP combination profile - track and fixed glass panel 600FP fixed glass panel profile All profiles available in 6', 8', 10', and 16' lengths
Brackets: Face fix 1B Jointing bracket 1BX
Fascias: Soffit fixed track F160 with extruded return Face fixed track F200 with extruded return
Glass Clamp Kits: 5/16" (8mm) glass panels 165 lbs. (75kg) capacity 8/75 Kit 286 lbs. (130kg) capacity 8/130 Kit 3/8" (10mm) glass panels 165 lbs. (75kg) capacity 10/75 Kit 286 lbs. (130kg) capacity 10/130 Kit 1/2" (12mm) glass panels 165 lbs. (75kg) capacity 12/75 Kit 286 lbs. (130kg) capacity 12/130 Kit
Accessories: Sliding door lock for glass panels 618 (3/8" (10mm) and 1/2" (12mm) glass only) Track stop HH3/290 Retaining stop mounted 601P within the track
CAPACITY
Max. door weight: 165 lbs. (75kg) and 285 lbs. (130kg)
Max. door height: 9'10" (3000mm)
Max. door width: 9'10" (3000mm)
Glass thickness: 5/16", (8mm) 3/8" (10mm) and 1/2" (12mm)
APPLICATIONS
The Pacer Glass Door System accommodates both sliding and fixed door panels, making it ideal for interior dividers in offices and shops as well as modern buildings and complexes.
DOOR TYPES
Glass panels of 5/16" (8mm), 3/8" (10mm) or 1/2" (12mm) thickness in tempered or laminated glass. For fixed glass panels an integrated track profile (600CFP) is available, allowing a sliding panel to pass alongside the fixed panel. A further option available is a clip-on profile (600FP) which attaches directly to the side of the track. This allows a combina-tion of two fixed panels with a sliding panel.
Clip-on fascia is available for both soffit fix and face fix situations.
Glass Clamp kits contain: 2 hangers, 2 clamps, 2 end track stops and 2 floor mounted guides.
Note: When using glass clamps in the combination with protective coatings forglass surfaces such as Clear Shield, ensure that the glass surface to be clampedis not treated with the Clear Shield coating.
10 1110 11
PACER GLASS
Track600
FasciaF160
FixedGlassProfile600FP
Channel94A
CombinationProfile600CFP
Guide608610612
Packing
Face FixBracket
1B
Guide608610612
Channel94A
CombinationProfile600CFP
Fixed GlassProfile600FP
600FP
Track600A
FasciaFI60X
Glass8mm-10mm-12mm(5/16"-3/8"-1/2")
Glass8mm-10mm-12mm(5/16"-3/8"-1/2")
FasciaFI60X
FasciaF200X
FasciaF200
FasciaFI60X
FasciaFI60X
FasciaFI60X
3/16"
(36.5)17 16
(26.9)11 16
(25.4)1
(20.6)
13 16
(187.3)73 8
(36.5)17 16
(41.3)15 8
(20.6)
13 16
(5mm)
GLASS WEIGHT
3/8" glass 5.05 lbs./sq. ft.1/2" glass 6.4 lbs./sq. ft.
See capacity section on page 9 for min./max. heights and weights.
10 1110 11
Anti LiftStop
Gasket
GlassClamp
Track600A
Retaining Stop601P
Adjustable Nut Lock Nut
Glass SlidingDoor Lock
618
R=8
Glass Clamp130/8-10-12mm
Glass Clamp75/8-10-12mm
(5/16")
FasciaFI60X
(147.6)513 16
(55.6)2 3 16
(200)7 7 8
(63.5)21 2
(77.8)31 16
(31.8)21 4
3(60.3)
2 8
(1050)
Sliding Panel Fixed Glass
Lock 618
Channel 94AGuide608/610/612
Glass Clamp130/8-10-12mm Fascia F200X
Clip Stop 601P
BracketFace Fix 1B
(1BX)
415/16"
(25.4)1
(39.9)19 16
(63.5)21 2
(77.8)31 16
(69.9)23 4
(57.2)21 4
(92.3)33 4
21 2 31 16
(33.3)15 16
(33.3)15 16
(33.3)173 4
(33.3)173 4
(500)1911 16
(1981.2)66
(500)1911 16
(155.6)6 1 8
(100)315 16
(55.6)23 16
(125.4)415 16
Glass8mm-10mm-12mm(5/16"-3/8"-1/2")
(5/16"-3/8"-1/2")
(5/16"-3/8"-1/2")
(5/16"-3/8"-1/2")
12 1312 13
FLEXIROL
STRAIGHT SLIDING FOR TOP-HUNG WOOD, METAL OR GLASS DOORS
RollerGuide
106N/94
Channel94A
0-9/16"
Adjustable NutLockNut
3/8"-13/16"
Hanger556/57
Track 550A
Lock Nut
Hole toLock
Slotted HolexSlotted
Hole12x30
1/2" x13/16"
Channel94A
Guide89/2N
Suspended Ceiling BracketWith Vertical Adjustment3S/550
LockNut
HorizontalAdjustable
LockNut
ThreadedHoleM16(5/8")
FootOperated
Lock
BoltKeep
Hanger556
TopGlassClampFRP02
Face FixBracket 1A/550
GlassTemperedLaminated
10-12(3/8"-1/2")
BottomGlassClampFRP02
115/16"
7/8" x11/2"7/8"-11/2"
Pemko BrushWeatherstrip18061CNB
(100)315 16
(100)315 16
(6.3)1 4
(7.9)5 16
(12.7)1 2
(4.8)3 16
(20.6)13 16
(20.6)13 16
(100)315 16
(71.4)213 16
(73)2 7 8
1 2(12.7)
(73)2 7 8
(1000)39 3 8
(100)315 16
3 16(4.7)
(100)315 16
1 2(12.7)
1 2 3 16
(17.4)
11 16DIA.
DIA.
(33.3)15 16
DoorThickness
(39.7)19 16
(100)31516
12 1312 13
FLEXIROL
STRAIGHT SLIDING FOR TOP-HUNG WOOD, METAL OR GLASS DOORS
TECHNICAL INFORMATION
Track: 550ABrackets: Face fix 1A/550 Soffit fix 3S/550
Hangers: Metal doors 556 Wood doors 556/57 - concealed fixing Wood doors 556/52 - angle plate fixing
Glass Profiles: Glass profile FRP02
Guides: Wood and metal doors 89/2N Wood doors 106N/94 Metal doors 104N/94 Metal doors, extended version 104NX/94
Guide Channel: Brass 94 Aluminum 94A
Accessories: Flush pull 400 Flush bolt 333/454 Narrow flush bolt and keep F3715 and F3734 Trackstop HH3/301 Sliding door lock for glass panels 618 (3/8" (10mm) and 1/2" (12mm) glass only - see page 9)
(1049.3)415 16
Guide106N Channel 94A
Flush BoltF3715
Hanger556/57
Hanger556/52
Flush Pull400
HH3/301
Track 550
Face Fix Bracket 1A/550
(749.3)291 2
(749.3)291 2
(100)315 16
(100)315 16
(749.3)291 2
(749.3)291 2
X
GLASS WEIGHT
3/8" glass 5.05 lbs./sq. ft.1/2" glass 6.4 lbs./sq. ft.
CAPACITY
Max. door weight: 1100 lbs. (556 hanger) (500kg)
Max. door height: 19'8" (6000mm) - wood or metal framed 8'6" (2600mm) - 3/8" (10mm) tempered glass 13'2" (4000mm) - 1/2" (12mm) tempered glass 7'6" (2300mm) - 7/16" (10.76mm) laminated glass 8'2" (2500mm) - 1/2" (12.76mm) laminated glass
Max. door width: 19'8" (6000mm) - wood or metal framed 4'3" (1300mm) - 3/8" (10mm) tempered glass 4'11" (1500mm) - 1/2" (12mm) tempered glass 3' (900mm) - 7/16" (10.76mm) laminated glass 4' (1200mm) - 1/2" (12.76mm) laminated glass
Door thickness: 19/16" (40mm) - 315/16" (100mm) - wood or metal framed 3/8" (10mm) or 1/2" (12mm) - tempered glass
APPLICATIONS
Henderson straight sliding Flexirol is ideally suited to hotels, confer-ence centers, shop-fronts, showrooms or any site that requires high performance and attractive finish.
DOOR TYPES
Wood doors, metal doors of either angle frame or box section and aluminum extrusion. Tempered glass panels of either 3/8" (10mm) or 1/2" (12mm) thickness and laminated glass panels of either 7/16" (10.76mm) or 1/2" (12.76mm) thickness.
Note: when using glass clamps in combination with protective coatings for glass surfaces such as Clear Shield,ensure that the glass surface to be clamped is not treated with the Clear Shield coating.
52 53
INDUSTRIAL & STAINLESS STEEL
TRACK AND HARDWARE
Distributed in North America by PEMKO
54 5554 55
290-307FOR STRAIGHT SLIDING WOOD DOORS
Bracket1A
Hanger 53
Flush Pull 414
Track290-307
Guide 31S
* When using 280 or 290 track with doors 1-3/8" and thicker for a sidewall condition, a spacer must be used behind the bracket.All Dimensions in Feet and Inches
* *
COMPOSITION
Track: Cold-rolled steel section hot-dip galvanized.Brackets: Cast aluminum alloy or pressed steel. Suitable brackets available for single, double and triple run applications. Track ends closed by end-clips or closed brackets.Hangers: Fitted with maintenance-free precision needle bearings, sealed for life. Adjustable in height. Steel parts rustproofed by electrozinc plating or painted.Guides: Choice of bottom guide arrangements available. For heavier doors, always fit guide channel 97 and guides 1021/2 or 105.Door Stops& Accessories: In painted or galvanized steel.
APPLICATIONS
◆ The hardware is suitable for industrial and commercial applications, with single or double lines of track, in situations where the structure will support the weight of the door. Where this support is insufficient, "Sherwood" bottom roller hardware should be specified.◆ Openings may be covered by any number of doors sliding to one or both sides as required. (See plan details).◆ On large doors where individual access is required, a wicket door may be incorporated in one of the sliding units. ◆ Where doors are fitted externally, an overhang is recommended.
Door Type lbs./sq. ft.Hollow Metal 18 ga 4.6 lbs.Hollow Metal 16 ga 5.8 lbs.Flush Wood, Particleboard Core 4.8 lbs.Flush Wood, Stave Core 4.3 lbs.Flush Wood, Mineral Core 4.7 lbs.
Use the table below to estimate the approximate weight (pounds per square foot) of doors of different materials.
301290 307305301H
Five track sizes are available to suit doors
of different weights up to 4400 lbs.
For straight sliding wood doors, the following are included: ◆ Support brackets and track ◆ Hangers ◆ Guides ◆ Full range of For best operation the door width should not exceed 3/4 of the door height. Wood doors for industrial applications should be framed, ledged and braced.
For commercial applications wood doors may be of flush construc-tion, or fully glazed for show-rooms.
301/290 301H 305 307
1/23/4 1 1
15/8 313/16 51/2 61/8
1 22 25/81/2 1 1 11/2
11/16 13/8 11/2 13/4
35/32 43/8 61/8 7 9/16
3/4 15/16 11/2 1
1
11/16 11/2 17/8 13/4
21/8 31/8 35/8 35/83/8
3/81/2
1/25/16
1/25/8
5/81/2
5/83/4
3/47/16
3/43/4
280
3/4
19/16
3/41/25/8
3/8
8G
11/2 2 3 31/2 41/2
Track
A
B
C
D
E
F
G
H
J
K
M1
M2
M3
N
1 x Spacer 1 x Spacer
Fixing Hole M1
Fixing Hole M3
Hanger 53
Guide 31S Guide 31D
Hanger 52
Fixing Hole M2
105R
97
Accessories
54 5554 55
Answer the questions below and fax (800-283-4050) or call (800-283-9988) Pemko Customer Service for assistance with choosing your hardware. Or use the chart on the following pages to select appropriate hardware for your job.
56 5756 57
Max. Door Height up to 10 ft. up to 12 ft. up to 14 ft. up to 16 ft. up to 20 ft.
Max. Door Weight up to 300-400 lbs.* up to 600-800 lbs.* up to 1000 lbs. up to 1500 lbs. up to 4400 lbs.
Door Thickness 11/2-2" 13/4-21/4" 13/4-21/4" 13/4-21/4" 23/8-23/4"
KIT NUMBER 290 301 301H 305 307Track
Brackets (one bracket for every three feet of track)
Hangers (two per door)
Stops (two per door)
Guides (three per door)
Guide Channel
Flush Pulls
Bow Handles
290-307Use the chart below to select appropriate hardware for your job. Or answer the questions on the previous page and fax (800-283-4050) or call (800-283-9988) Pemko Customer Service for assistance with choosing your hardware.
9A/290sidewall-use for ample installation space
3A/290overhead-use for
limited installation space
4A/290overhead-use for ample installation space
57A/S 600 lb. door*
door top mount
105roller guide
5/290sidewall dual track
53K/N 300 lb. door*door top mount w/door face flanges
53K/S200 400 lb. door*door top mount w/door face flanges
57K/N300 lb. doordoor top mount
106Runder guide roller
463 bow handle - 61/4"
414 flush pull
1A/290sidewall-use for
limited installation space
31Ssingle wall mounted stay roller
126HD/Aheavy duty ground stay roller
126ground stay roller
4R/290Soverhead-suspended
94A or 94B aluminum or brass guide channel
89 steel guide channel
97 steel guide channel
52K/N300 lb. doordoor top/edge mount
HARDWARE KIT FOR STRAIGHT SLIDING WOOD DOORS (complete, ready to insta l l )
57A/N 800 lb. door*
door top mount
53A/S600 lb. door*
door top mount w/door face flanges
53A/N 800 lb. door*
door top mount w/door face flanges
52A/N 800 lb. doordoor top/edge mount
31Ssingle wall mounted stay roller
463 bow handle - 61/4"
414 flush pull
863 bow handle - 51/4"
1A/301sidewall-use for
limited installation
space
3A/301overhead-use for
limited installation space
4A/301 overhead-use for ample installation space
4R/301Soverhead-suspended
5/301 sidewall double track
9A/301 sidewall-use for ample installation space
290 301
52A/S600 lb. doordoor top/edge mount
31Ddouble wall mounted stay roller
Jointing Brackets available for joining two pieces of track at bracet (i.e. 1AX/301)
97 steel guide channel
109double fastener single wall or ground stop
HH3/290track mounted double fastener stop
107 single wall stop-double rubber buffers
HH3/301track mounted double fastener stop
56 5756 57
Max. Door Height up to 10 ft. up to 12 ft. up to 14 ft. up to 16 ft. up to 20 ft.
Max. Door Weight up to 300-400 lbs.* up to 600-800 lbs.* up to 1000 lbs. up to 1500 lbs. up to 4400 lbs.
Door Thickness 11/2-2" 13/4-21/4" 13/4-21/4" 13/4-21/4" 23/8-23/4"
KIT NUMBER 290 301 301H 305 307Track
Brackets (one bracket for every three feet of track)
Hangers (two per door)
Stops (two per door)
Guides (three per door)
Guide Channel
Flush Pulls
Bow Handles
290-307Use the chart below to select appropriate hardware for your job. Or answer the questions on the previous page and fax (800-283-4050) or call (800-283-9988) Pemko Customer Service for assistance with choosing your hardware.
5/305 sidewall double track
3A/305 overhead-use for
limited installation space
4R/305Soverhead-suspended
1/307/Ssidewall-use for
limited installation space
5/307/Ssidewall double track
4R/307Soverhead-suspended
HARDWARE KIT FOR STRAIGHT SLIDING WOOD DOORS (complete, ready to insta l l )
52A/N 1000 lb. doordoor top/edge mount
57A/N 1000 lb. door
door top mount53A/N 1000 lb. doordoor top mount w/door face flanges
31Ssingle wall mounted stay roller
463 bow handle - 61/4"
414 flush pull
31Ssingle wall mounted stay roller
463 bow handle - 61/4"
414 flush pull
52C/S 1500 lb. doordoor top/edge mount
57C/S 1500 lb. door
door top mount53C/S 1500 lb. doordoor top mount w/door face flanges
1A/305sidewall-use for
limited installation space
31Ssingle wall mounted stay roller
464 bow handle - 101/4"
413 flush pull
1A/301sidewall-use for
limited installation
space
3A/301overhead-use for
limited installation space
4A/301 overhead-use for ample installation space
4R/301Soverhead-suspended
5/301 sidewall double track
9A/301 sidewall-use for ample installation space
3/307Soverhead-use for
limited installation space
4/307Soverhead-use for ample installation space
53FJ/S 4400 lb. doordoor top mount w/door face flanges
305301H 307
31Ddouble wall mounted stay roller
31Ddouble wall mounted stay roller
31Ddouble wall mounted stay roller
4A/305overhead-use for ample installation space
97 steel guide channel 97 steel guide channel 97 steel guide channel89 steel guide channel
89 steel guide channel
107 single wall stop-double rubber buffers not required
107 single wall stop-double rubber buffers
HH3/301track mounted double fastener stop
58 5958 59
290-307FOR STRAIGHT SLIDING METAL DOORS
Bracket 1A
Hanger 56
Bow Handle
463
Track290-307
Guide 31S
* When using 280 or 290 track with doors 1-3/8" and thicker for a sidewall condition, a spacer must be used behind the bracket.All Dimensions in Feet and Inches
*
COMPOSITION
Track: Cold-rolled steel section hot-dip galvanized.Brackets: Cast aluminum alloy or pressed steel. Suitable brackets available for single, double and triple run applications. Track ends closed by end-clips or closed brackets.Hangers: Fitted with maintenance-free precision needle bearings, sealed for life. Adjustable in height. Steel parts rustproofed by electrozinc plating or painted.Guides: Choice of bottom guide arrangements available. For heavier doors, always fit guide channel 97 and guides 104P or 104PX.Door Stops & Accessories: In painted or galvanized steel.
APPLICATIONS
◆ The hardware is suitable for industrial and commercial applications, with single or double lines of track, in situations where the structure will support the weight of the door. Where this support is insufficient, "Sherwood" bottom roller hardware should be specified.◆ Openings may be covered by any number of doors sliding to one or both sides as required. (See plan details).◆ On large doors where individual access is required, a wicket door may be incorporated in one of the sliding units. ◆ Where doors are fitted externally, an overhang is recommended.
Door Type lbs./sq. ft.Hollow Metal 18 ga 4.6 lbs.Hollow Metal 16 ga 5.8 lbs.Flush Wood, Particleboard Core 4.8 lbs.Flush Wood, Stave Core 4.3 lbs.Flush Wood, Mineral Core 4.7 lbs.
Use the table below to estimate the approximate weight (pounds per square foot) of doors of different materials.
301290 307305301H
Five track sizes are available to suit doors
of different weights up to 4400 lbs.
For straight sliding metal doors, the following are included: ◆ Support brackets and track ◆ Hangers ◆ Guides ◆ Full range of accessoriesFor best operation the door width should not exceed 3/4 of the door height. Door construction is normally framed and braced using steel angle section then clad with steel sheet or other suitable material. When steel box section is used, specify hangers with extended strap bolts and elongated guides. If alumi-num framed doors are to be used, type of hanger required will depend on door section.
1 x Spacer
Fixing Hole M1
Fixing Hole M3
Hanger 56
56X
Fixing Hole M2
Guide 31S
1 x Spacer *
104PX
97299
89Fixing Hole M4
301/290 301H 305 307
1/23/4 1 1
15/8 313/16 51/2 61/8
1 22 25/81/2 1 1 11/2
11/16 13/8 11/2 13/4
35/32 43/8 61/8 7 9/16
3/4 15/16 11/2 1
11/16 11/2 17/8 13/4
21/8 31/8
1/81/8
35/8 35/83/8
3/81/2
1/25/16
1/25/8
5/81/2
5/83/4
3/47/16
11/16
11/1611/16
11/1613/16
13/16
11/16
280
1/4
19/16
3/41/25/8
3/8
8G
Track
A
B
C
D
E
F
G
H
J
K
M1
M2
M3
M4
11/2 2 3 31/2 41/2N
51/2 51/251/243/8P
58 5958 59
Answer the questions below and fax (800-283-4050) or call (800-283-9988) Pemko Customer Service for assistance with choosing your hardware. Or use the chart on the following pages to select appropriate hardware for your job.
60 6160 61
Max. Door Height up to 10 ft. up to 12 ft. up to 14 ft. up to 16 ft. up to 20 ft.
Max. Door Weight up to 300-400 lbs.* up to 600-800 lbs.* up to 1000 lbs. up to 1500 lbs. up to 4400 lbs.
Door Thickness 11/2-2" 13/4-21/4" 13/4-21/4" 13/4-21/4" 23/8-23/4"
KIT NUMBER 290 301 301H 305 307Track
Brackets (one bracket for every three feet of track)
Hangers (two per door)
Stops (two per door)
Guides (three per door)
Guide Channel
Flush Pulls
Bow Handles
290-307Use the chart below to select appropriate hardware for your job. Or answer the questions on the previous page and fax (800-283-4050) or call (800-283-9988) Pemko Customer Service for assistance with choosing your hardware.
9A/290sidewall-use for ample installation space
3A/290overhead-use for
limited installation space
4A/290overhead-use for ample installation space
57A/S 600 lb. door*
door top mount
105roller guide
5/290sidewall dual track
56K/S 300 lb. door*door top mount w/door face flanges
56K/S200 400 lb. door*door top mount w/door face flanges
57K/N300 lb. doordoor top mount
106Runder guide roller
463 bow handle - 61/4"
1A/290sidewall-use for
limited installation space
31Ssingle wall mounted stay roller
126HD/Aheavy duty ground stay roller
126ground stay roller
4R/290Soverhead-suspended
56KX/S300 lb. doordoor top/edge mount
HARDWARE KIT FOR STRAIGHT SLIDING METAL DOORS (complete, ready to insta l l )
31Ssingle wall mounted stay roller
31Ddouble wall mounted stay roller
463 bow handle - 61/4"863 bow handle - 51/4"
1A/301sidewall-use for
limited installation
space
3A/301overhead-use for
limited installation space
4A/301 overhead-use for ample installation space
4R/301Soverhead-suspended
5/301 sidewall double track
9A/301 sidewall-use for ample installation space
290 301
414 flush pull 414 flush pull
Jointing Brackets available for joining two pieces of track at bracet (i.e. 1AX/301)
109double fastener single wall or ground stop
HH3/290track mounted double fastener stop
107 single wall stop-double rubber buffers
HH3/301track mounted double fastener stop
94A or 94B aluminum or brass guide channel
89 steel guide channel
97 steel guide channel 97 steel guide channel 97 steel guide channel 97 steel guide channel 97 steel guide channel89 steel guide channel
89 steel guide channel
57A/N 800 lb. door*
door top mount
56AX/N 800 lb. door*door top mount w/door face flanges
56A/S600 lb. doordoor top/edge mount
56A/N 800 lb. door*door top/edge mount
56AX/S600 lb. door*
door top mount w/door face flanges
60 6160 61
Max. Door Height up to 10 ft. up to 12 ft. up to 14 ft. up to 16 ft. up to 20 ft.
Max. Door Weight up to 300-400 lbs.* up to 600-800 lbs.* up to 1000 lbs. up to 1500 lbs. up to 4400 lbs.
Door Thickness 11/2-2" 13/4-21/4" 13/4-21/4" 13/4-21/4" 23/8-23/4"
KIT NUMBER 290 301 301H 305 307Track
Brackets (one bracket for every three feet of track)
Hangers (two per door)
Stops (two per door)
Guides (three per door)
Guide Channel
Flush Pulls
Bow Handles
290-307Use the chart below to select appropriate hardware for your job. Or answer the questions on the previous page and fax (800-283-4050) or call (800-283-9988) Pemko Customer Service for assistance with choosing your hardware.
5/305 sidewall double track
3A/305 overhead-use for
limited installation space
4R/305Soverhead-suspended
1/307/Ssidewall-use for
limited installation space
5/307/Ssidewall double track
HARDWARE KIT FOR STRAIGHT SLIDING METAL DOORS (complete, ready to insta l l )
56A/N 1000 lb. doordoor top/edge mount
57A/N 1000 lb. door
door top mount
31Ssingle wall mounted stay roller
463 bow handle - 61/4"
31Ssingle wall mounted stay roller
463 bow handle - 61/4"
56C/S 1500 lb. doordoor top/edge mount
57C/S 1500 lb. door
door top mount
1A/305sidewall-use for
limited installation space
31Ssingle wall mounted stay roller
464 bow handle - 101/4"
413 flush pull
1A/301sidewall-use for
limited installation
space
3A/301overhead-use for
limited installation space
4A/301 overhead-use for ample installation space
4R/301Soverhead-suspended
5/301 sidewall double track
9A/301 sidewall-use for ample installation space
3A/307overhead-use for
limited installation space
4A/307overhead-use for ample installation space
56FJ/S 4400 lb. doordoor top mount w/door face flanges -angle frame
305301H 307
31Ddouble wall mounted stay roller
31Ddouble wall mounted stay roller
31Ddouble wall mounted stay roller
414 flush pull414 flush pull
4A/305overhead-use for ample installation space
4R/307Soverhead-suspended
107 single wall stop-double rubber buffers not required
107 single wall stop-double rubber buffers
HH3/301track mounted double fastener stop
94A or 94B aluminum or brass guide channel
89 steel guide channel
97 steel guide channel 97 steel guide channel 97 steel guide channel 97 steel guide channel 97 steel guide channel89 steel guide channel
89 steel guide channel
56FJX/S 4400 lb. doordoor top mount -box frame
56CX/S1500 lb. doordoor top mount
56AX/N 1000 lb. doordoor top mount w/door face flanges
98 9998 99
TitanFOR SLIDING CANTILEVER GATES
Top Guides
TrackEnd GuideEnd
RollerRoller
Overhang
APPLICATIONS
◆ Gates into security-fenced areas (e.g. airports, storage), factory entrances, condominiums and residences. ◆ Gates over railway lines or uneven – surface roadways.◆ These gates are best constructed in welded steel square tubing to your own design giving better security than round tube and chainlink gates. ◆ Opening width and gate weight determine the length of overhang required and track and roller type to use.◆ There should be enough space available to slide the gate and overhang clear of the opening. ◆ Rollers should be mounted on substantial concrete footings, as wide apart as possible on the overhang. ◆ Titan can also be used for doors, where no overhead support exists for a sectional or shutter door to be fitted.
COMPOSITION
Track: Cold-rolled galvanized steel section in 20 ft. lengths.Rollers: Steel wheels with precision ball bearings mounted on height-adjustable ground plates. All parts are galvanized or painted.End Rollers: Steel ball bearing wheel with clamp-plate for rail-end fixing. All parts galvanized.End Guide: Wall or post-fixed pair of adjustable nylon guide rollers. Steel parts are galvanized. Alternative guides available.
Titan cantilever hardware suits sliding metal gates. The track is fixed to the base of the gate, which runs on a pair of rollers ground-fixed to one side of the open-ing. This leaves the roadway free from any obstructions, especially top or bot-tom rails, which easily get blocked, damaged or can upset forklift loads. The heavy-duty rollers are hidden within the rail for maximum security and weather protection.
Two track sizes are available to suit openings up to 32
ft. wide.
700 (not shown) holds up to 1200 lbs. if power operated.
710 (not shown) holds up to 2000 lbs. if manually operated
98 9998 99
HOW TO CHOOSE YOUR HARDWARE: Choose gate type, manual or automatic. Read across to required gate opening width, then read downward to estimated gate weight. Shaded area indicates roller type and overhang length required.
Use a pair of rollers No. 704 and track No. 700 Use a pair of rollers No. 708 and track No. 700 Use a pair of rollers No. 718 and track No. 710
MANUAL OPENING WIDTH (ft)
AUTOMATIC OPENING WIDTH (ft)
GATE WEIGHT: 400lbs. 600lbs. 800lbs. 1000lbs. 1200lbs. 1400lbs. 1600lbs. 1800lbs. 2000lbs.
GATE WEIGHT: 300lbs. 400lbs. 500lbs. 600lbs. 700lbs. 800lbs. 900lbs. 1000lbs. 1100lbs. 1200lbs.
110 111110 1113S/5501A/550
280 A
600 FP 600 CFP
45 O
Pacer Curve 600 C
Face Fix Bracket 281
(Bottom View) (Bottom View)
550 Track 600 Track52
55.5
100
Bolt NotSuppliedby PCH
Bolt NotSuppliedby PCH
Pacer Switch 45R/600 Pacer Switch 45L/600350 350
14.0
Thr
ough
out
R 374
91
79.5
85.5
38
Jointing Bracket 1BX
fl 9
Bracket 1B
20
fl 9
13
80
7
40
25
20
40
34
33
24
34
48
40
48
34
70
13
140
70
70
100-1000
100
6
6
29
20
20
29
2
73
98
(15/16")
(15/16")
(33/8")
(11/2")
(15/16")
(21/16")
(23/16")
(31/8")
(39/16")
(19/16")
(133/4") (133/4")
(17/8")
(15/16")
(13/16")
(1/2")
(19/16")
(3/8")
(17/8")
(15/16")
(23/4")
(1/2")(3/8")
(315/16") (31/8")
(315/16")
(315/16"-393/8")
(23/4")
(23/4")
(51/2")
(19/16")
(1")(1/4")
(13/16")
(13/16")
(11/8")
(1/4")
(1/4") (11/8")
(13/16")
(1/16")
(37/8")
(27/8")
Pacer
Bracket 1B
Pacer
Jointing Bracket 1BX
B R AC K E T S
v
3S/5501A/550
280 A
600 FP 600 CFP
45 O
Pacer Curve 600 C
Face Fix Bracket 281
(Bottom View) (Bottom View)
550 Track 600 Track52
55.5
100
Bolt NotSuppliedby PCH
Bolt NotSuppliedby PCH
Pacer Switch 45R/600 Pacer Switch 45L/600350 350
14.0
Thr
ough
out
R 374
91
79.5
85.5
38
Jointing Bracket 1BX
fl 9
Bracket 1B
20
fl 9
13
80
7
40
25
20
40
34
33
24
34
48
40
48
34
70
13
140
70
70
100-1000
100
6
6
29
20
20
29
2
73
98
(15/16")
(15/16")
(33/8")
(11/2")
(15/16")
(21/16")
(23/16")
(31/8")
(39/16")
(19/16")
(133/4") (133/4")
(17/8")
(15/16")
(13/16")
(1/2")
(19/16")
(3/8")
(17/8")
(15/16")
(23/4")
(1/2")(3/8")
(315/16") (31/8")
(315/16")
(315/16"-393/8")
(23/4")
(23/4")
(51/2")
(19/16")
(1")(1/4")
(13/16")
(13/16")
(11/8")
(1/4")
(1/4") (11/8")
(13/16")
(1/16")
(37/8")
(27/8")
3S/5501A/550
280 A
600 FP 600 CFP
45 O
Pacer Curve 600 C
Face Fix Bracket 281
(Bottom View) (Bottom View)
550 Track 600 Track52
55.5
100
Bolt NotSuppliedby PCH
Bolt NotSuppliedby PCH
Pacer Switch 45R/600 Pacer Switch 45L/600350 350
14.0
Thr
ough
out
R 374
91
79.5
85.5
38
Jointing Bracket 1BX
fl 9
Bracket 1B
20
fl 9
13
80
7
40
25
20
40
34
33
24
34
48
40
48
34
70
13
140
70
70
100-1000
100
6
6
29
20
20
29
2
73
98
(15/16")
(15/16")
(33/8")
(11/2")
(15/16")
(21/16")
(23/16")
(31/8")
(39/16")
(19/16")
(133/4") (133/4")
(17/8")
(15/16")
(13/16")
(1/2")
(19/16")
(3/8")
(17/8")
(15/16")
(23/4")
(1/2")(3/8")
(315/16") (31/8")
(315/16")
(315/16"-393/8")
(23/4")
(23/4")
(51/2")
(19/16")
(1")(1/4")
(13/16")
(13/16")
(11/8")
(1/4")
(1/4") (11/8")
(13/16")
(1/16")
(37/8")
(27/8")
3S/5501A/550
280 A
600 FP 600 CFP
45 O
Pacer Curve 600 C
Face Fix Bracket 281
(Bottom View) (Bottom View)
550 Track 600 Track52
55.5
100
Bolt NotSuppliedby PCH
Bolt NotSuppliedby PCH
Pacer Switch 45R/600 Pacer Switch 45L/600350 350
14.0
Thr
ough
out
R 374
91
79.5
85.5
38
Jointing Bracket 1BX
fl 9
Bracket 1B
20
fl 9
13
80
7
40
25
20
40
34
33
24
34
48
40
48
34
70
13
140
70
70
100-1000
100
6
6
29
20
20
29
2
73
98
(15/16")
(15/16")
(33/8")
(11/2")
(15/16")
(21/16")
(23/16")
(31/8")
(39/16")
(19/16")
(133/4") (133/4")
(17/8")
(15/16")
(13/16")
(1/2")
(19/16")
(3/8")
(17/8")
(15/16")
(23/4")
(1/2")(3/8")
(315/16") (31/8")
(315/16")
(315/16"-393/8")
(23/4")
(23/4")
(51/2")
(19/16")
(1")(1/4")
(13/16")
(13/16")
(11/8")
(1/4")
(1/4") (11/8")
(13/16")
(1/16")
(37/8")
(27/8")
3S/5501A/550
280 A
600 FP 600 CFP
45 O
Pacer Curve 600 C
Face Fix Bracket 281
(Bottom View) (Bottom View)
550 Track 600 Track52
55.5
100
Bolt NotSuppliedby PCH
Bolt NotSuppliedby PCH
Pacer Switch 45R/600 Pacer Switch 45L/600350 350
14.0
Thr
ough
out
R 374
91
79.5
85.5
38
Jointing Bracket 1BX
fl 9
Bracket 1B
20
fl 9
13
80
7
40
25
20
40
34
33
24
34
48
40
48
34
70
13
140
70
70
100-1000
100
6
6
29
20
20
29
2
73
98
(15/16")
(15/16")
(33/8")
(11/2")
(15/16")
(21/16")
(23/16")
(31/8")
(39/16")
(19/16")
(133/4") (133/4")
(17/8")
(15/16")
(13/16")
(1/2")
(19/16")
(3/8")
(17/8")
(15/16")
(23/4")
(1/2")(3/8")
(315/16") (31/8")
(315/16")
(315/16"-393/8")
(23/4")
(23/4")
(51/2")
(19/16")
(1")(1/4")
(13/16")
(13/16")
(11/8")
(1/4")
(1/4") (11/8")
(13/16")
(1/16")
(37/8")
(27/8")
3S/5501A/550
280 A
600 FP 600 CFP
45 O
Pacer Curve 600 C
Face Fix Bracket 281
(Bottom View) (Bottom View)
550 Track 600 Track52
55.5
100
Bolt NotSuppliedby PCH
Bolt NotSuppliedby PCH
Pacer Switch 45R/600 Pacer Switch 45L/600350 350
14.0
Thr
ough
out
R 374
91
79.5
85.5
38
Jointing Bracket 1BX
fl 9
Bracket 1B
20
fl 9
13
80
7
40
25
20
40
34
33
24
34
48
40
48
34
70
13
140
70
70
100-1000
100
6
6
29
20
20
29
2
73
98
(15/16")
(15/16")
(33/8")
(11/2")
(15/16")
(21/16")
(23/16")
(31/8")
(39/16")
(19/16")
(133/4") (133/4")
(17/8")
(15/16")
(13/16")
(1/2")
(19/16")
(3/8")
(17/8")
(15/16")
(23/4")
(1/2")(3/8")
(315/16") (31/8")
(315/16")
(315/16"-393/8")
(23/4")
(23/4")
(51/2")
(19/16")
(1")(1/4")
(13/16")
(13/16")
(11/8")
(1/4")
(1/4") (11/8")
(13/16")
(1/16")
(37/8")
(27/8")
T R AC K , I N T E R S E C T S A N D C U RV E S
FLEXIROL 555 JUNCTIONS/INTERSECTS
Husky Pacer Pacer Pacer Flexirol
�
����������������������
�������
����������
��������������������������
�������������
�������
�������������
�������
������
�������������
�������
90ß 90ß90ß
90ß Elbow
551H/90 Jointing Strip
H90/550
90ß T-Junction
552H/90 Track/Hanger Guide
JointingStrip
551/180
JointingStrip
551H/90
TW/550
JointingStrip
551/180
FLEXIROL 556 JUNCTIONS/INTERSECTS(Top Views)
PACER CURVES/INTERSECTS(Bottom Views)
3S/5501A/550
280 A
600 FP 600 CFP
45 O
Pacer Curve 600 C
Face Fix Bracket 281
(Bottom View) (Bottom View)
550 Track 600 Track52
55.5
100
Bolt NotSuppliedby PCH
Bolt NotSuppliedby PCH
Pacer Switch 45R/600 Pacer Switch 45L/600350 350
14.0
Thr
ough
out
R 374
91
79.5
85.5
38
Jointing Bracket 1BX
fl 9
Bracket 1B
20
fl 9
13
80
7
40
25
20
40
34
33
24
34
48
40
48
34
70
13
140
70
70
100-1000
100
6
6
29
20
20
29
2
73
98
(15/16")
(15/16")
(33/8")
(11/2")
(15/16")
(21/16")
(23/16")
(31/8")
(39/16")
(19/16")
(133/4") (133/4")
(17/8")
(15/16")
(13/16")
(1/2")
(19/16")
(3/8")
(17/8")
(15/16")
(23/4")
(1/2")(3/8")
(315/16") (31/8")
(315/16")
(315/16"-393/8")
(23/4")
(23/4")
(51/2")
(19/16")
(1")(1/4")
(13/16")
(13/16")
(11/8")
(1/4")
(1/4") (11/8")
(13/16")
(1/16")
(37/8")
(27/8")
3S/5501A/550
280 A
600 FP 600 CFP
45 O
Pacer Curve 600 C
Face Fix Bracket 281
(Bottom View) (Bottom View)
550 Track 600 Track52
55.5
100
Bolt NotSuppliedby PCH
Bolt NotSuppliedby PCH
Pacer Switch 45R/600 Pacer Switch 45L/600350 350
14.0
Thr
ough
out
R 374
91
79.5
85.5
38
Jointing Bracket 1BX
fl 9
Bracket 1B
20
fl 9
13
80
7
40
25
20
40
34
33
24
34
48
40
48
34
70
13
140
70
70
100-1000
100
6
6
29
20
20
29
2
73
98
(15/16")
(15/16")
(33/8")
(11/2")
(15/16")
(21/16")
(23/16")
(31/8")
(39/16")
(19/16")
(133/4") (133/4")
(17/8")
(15/16")
(13/16")
(1/2")
(19/16")
(3/8")
(17/8")
(15/16")
(23/4")
(1/2")(3/8")
(315/16") (31/8")
(315/16")
(315/16"-393/8")
(23/4")
(23/4")
(51/2")
(19/16")
(1")(1/4")
(13/16")
(13/16")
(11/8")
(1/4")
(1/4") (11/8")
(13/16")
(1/16")
(37/8")
(27/8")
3S/5501A/550
280 A
600 FP 600 CFP
45 O
Pacer Curve 600 C
Face Fix Bracket 281
(Bottom View) (Bottom View)
550 Track 600 Track52
55.5
100
Bolt NotSuppliedby PCH
Bolt NotSuppliedby PCH
Pacer Switch 45R/600 Pacer Switch 45L/600350 350
14.0
Thr
ough
out
R 374
91
79.5
85.5
38
Jointing Bracket 1BX
fl 9
Bracket 1B
20
fl 9
13
80
7
40
25
20
40
34
33
24
34
48
40
48
34
70
13
140
70
70
100-1000
100
6
6
29
20
20
29
2
73
98
(15/16")
(15/16")
(33/8")
(11/2")
(15/16")
(21/16")
(23/16")
(31/8")
(39/16")
(19/16")
(133/4") (133/4")
(17/8")
(15/16")
(13/16")
(1/2")
(19/16")
(3/8")
(17/8")
(15/16")
(23/4")
(1/2")(3/8")
(315/16") (31/8")
(315/16")
(315/16"-393/8")
(23/4")
(23/4")
(51/2")
(19/16")
(1")(1/4")
(13/16")
(13/16")
(11/8")
(1/4")
(1/4") (11/8")
(13/16")
(1/16")
(37/8")
(27/8")
H90/550
45R/550Intersect
Right
45L/550Intersect
Left
(Top View) (Top View)
551/180
551H/45551H/135
Track Hanger Guide 552H/135
551/180
551H/135 551/180551H/135
45R/55045R/550Intersect
Right
45L/550Intersect
Left
(Top View) (Top View)
551/180
551H/45551H/135
Track Hanger Guide 552H/135
551/180
551H/135 551/180551H/135
45R/550Intersect
Right
45L/550Intersect
Left
(Top View) (Top View)
551/180
551H/45551H/135
Track Hanger Guide 552H/135
551/180
551H/135 551/180551H/135
45R/550Intersect
Right
45L/550Intersect
Left
(Top View) (Top View)
551/180
551H/45551H/135
Track Hanger Guide 552H/135
551/180
551H/135 551/180551H/135
TW/550
Pacer track supplied in mill finish as standard. Flexirol track supplied in mill finish and RAL 9010 as standard.
45L/550 H135/550 H90C/550
112 113112 113
H A N G E R S
57B
25
561/2B56B 56BX
HENDERSON
90
62BA/148
61B61B/4
52B
HENDERSON
HENDERSON
HENDERSON
HENDERSON
HENDERSON
HENDERSON
HENDERSON
21B 21B/4 21B0/4
63BA/10463B0A/114 63BA/20562BA/250
205
12
90
fl10
148
12
250
909090
fl10
114
fl10
90
104
25
38 38
140
65
5
185
5
124
133
25
13
155
1325 25 13
(39/16")90
(29/16")65
(51/2")
(39/16")
(29/16")
(51/2")139
(1")
(75/16")185
(3/16")(75/16")
(3/16") (51/4")
(1")
(47/8")
(11/2")
(6")152
(61/8")
(11/2")
(6")
(61/8")
152
38
155
(11/2")
(6")
(61/8")
152
155
(1") (1/2") (1") (1/2") (1") (1/2")
(39/16")
(41/2")
(3/8") (3/8")
(3/8")
(39/16") (39/16") (39/16") (39/16")
(41/8")(513/16")
(913/16")
(1/2")
(1/2")
(81/16")
(1/2")
25.4
35
21B/MD
12.7
76
152.5
152.5
61B/MD
34.5
76
140
25
(3")
(13/8")
(51/2")
(1") (6")
(6")
(1")
(3")
(13/8")
PACER HANGERS
B R AC K E T S
3S/5501A/550
280 A
600 FP 600 CFP
45 O
Pacer Curve 600 C
Face Fix Bracket 281
(Bottom View) (Bottom View)
550 Track 600 Track52
55.5
100
Bolt NotSuppliedby PCH
Bolt NotSuppliedby PCH
Pacer Switch 45R/600 Pacer Switch 45L/600350 350
14.0
Thr
ough
out
R 374
91
79.5
85.5
38
Jointing Bracket 1BX
fl 9
Bracket 1B
20
fl 9
13
80
7
40
25
20
40
34
33
24
34
48
40
48
34
70
13
140
70
70
100-1000
100
6
6
29
20
20
29
2
73
98
(15/16")
(15/16")
(33/8")
(11/2")
(15/16")
(21/16")
(23/16")
(31/8")
(39/16")
(19/16")
(133/4") (133/4")
(17/8")
(15/16")
(13/16")
(1/2")
(19/16")
(3/8")
(17/8")
(15/16")
(23/4")
(1/2")(3/8")
(315/16") (31/8")
(315/16")
(315/16"-393/8")
(23/4")
(23/4")
(51/2")
(19/16")
(1")(1/4")
(13/16")
(13/16")
(11/8")
(1/4")
(1/4") (11/8")
(13/16")
(1/16")
(37/8")
(27/8")
3S/5501A/550
280 A
600 FP 600 CFP
45 O
Pacer Curve 600 C
Face Fix Bracket 281
(Bottom View) (Bottom View)
550 Track 600 Track52
55.5
100
Bolt NotSuppliedby PCH
Bolt NotSuppliedby PCH
Pacer Switch 45R/600 Pacer Switch 45L/600350 350
14.0
Thr
ough
out
R 374
91
79.5
85.5
38
Jointing Bracket 1BX
fl 9
Bracket 1B
20
fl 9
13
80
7
40
25
20
40
34
33
24
34
48
40
48
34
70
13
140
70
70
100-1000
100
6
6
29
20
20
29
2
73
98
(15/16")
(15/16")
(33/8")
(11/2")
(15/16")
(21/16")
(23/16")
(31/8")
(39/16")
(19/16")
(133/4") (133/4")
(17/8")
(15/16")
(13/16")
(1/2")
(19/16")
(3/8")
(17/8")
(15/16")
(23/4")
(1/2")(3/8")
(315/16") (31/8")
(315/16")
(315/16"-393/8")
(23/4")
(23/4")
(51/2")
(19/16")
(1")(1/4")
(13/16")
(13/16")
(11/8")
(1/4")
(1/4") (11/8")
(13/16")
(1/16")
(37/8")
(27/8")
Husky
Flexirol Flexirol
112 113112 113
556/62/20
fl12
225
20 35
85
110
68
40
4022535
85
fl12
110
2323
556/63/40 556/62/40
5
221
458262
50
122
556 556/57 82
85
38
555 555/57 555/52
165
225
3881555/21
555/61
81
152
81
81
38
38
85
81
85
38
(27/16") (31/4")
(13/4")
(115/16")
(413/16") (11/2")
(33/8")
(31/4")
(31/4")
(31/4")
556/52
165
225
38
82
556/61
6
82
38
185
127
(87/8")
(5")
(11/2")
(3/16")
(61/2")
(75/16")
(1/4")
(11/2") (63/4")
556/21
81
81
82
152
38
5
44
172
(13/4")
(3/16")
(6")
(31/4")
(33/16")
(33/16")
(11/2")
(83/4")
556A/221
(33/16")
(11/2")
(33/16")
(33/16")
(6")
(11/2")
(33/8")
H A N G E R S
57B
25
561/2B56B 56BX
HENDERSON
90
62BA/148
61B61B/4
52B
HENDERSON
HENDERSON
HENDERSON
HENDERSON
HENDERSON
HENDERSON
HENDERSON
21B 21B/4 21B0/4
63BA/10463B0A/114 63BA/20562BA/250
205
12
90
fl10
148
12
250
909090
fl10
114
fl10
90
104
25
38 38
140
65
5
185
5
124
133
25
13
155
1325 25 13
(39/16")90
(29/16")65
(51/2")
(39/16")
(29/16")
(51/2")139
(1")
(75/16")185
(3/16")(75/16")
(3/16") (51/4")
(1")
(47/8")
(11/2")
(6")152
(61/8")
(11/2")
(6")
(61/8")
152
38
155
(11/2")
(6")
(61/8")
152
155
(1") (1/2") (1") (1/2") (1") (1/2")
(39/16")
(41/2")
(3/8") (3/8")
(3/8")
(39/16") (39/16") (39/16") (39/16")
(41/8")(513/16")
(913/16")
(1/2")
(1/2")
(81/16")
(1/2")
25.4
35
21B/MD
12.7
76
152.5
152.5
61B/MD
34.5
76
140
25
(3")
(13/8")
(51/2")
(1") (6")
(6")
(1")
(3")
(13/8")
57B
25
561/2B56B 56BX
HENDERSON
90
62BA/148
61B61B/4
52B
HENDERSON
HENDERSON
HENDERSON
HENDERSON
HENDERSON
HENDERSON
HENDERSON
21B 21B/4 21B0/4
63BA/10463B0A/114 63BA/20562BA/250
205
12
90
fl10
148
12
250
909090
fl10
114
fl10
90
104
25
38 38
140
65
5
185
5
124
133
25
13
155
1325 25 13
(39/16")90
(29/16")65
(51/2")
(39/16")
(29/16")
(51/2")139
(1")
(75/16")185
(3/16")(75/16")
(3/16") (51/4")
(1")
(47/8")
(11/2")
(6")152
(61/8")
(11/2")
(6")
(61/8")
152
38
155
(11/2")
(6")
(61/8")
152
155
(1") (1/2") (1") (1/2") (1") (1/2")
(39/16")
(41/2")
(3/8") (3/8")
(3/8")
(39/16") (39/16") (39/16") (39/16")
(41/8")(513/16")
(913/16")
(1/2")
(1/2")
(81/16")
(1/2")
25.4
35
21B/MD
12.7
76
152.5
152.5
61B/MD
34.5
76
140
25
(3")
(13/8")
(51/2")
(1") (6")
(6")
(1")
(3")
(13/8")
PACER MULTIDIRECTIONAL HANGERS
FLEXIROL HANGERS (135° movement)
PACER HANGERS
114 115114 115
fl 16
21K/PX(Top)
21B/P(Top)
(Bottom) (Bottom)
2513 13
13
38
13
45
38
13
45
(Bottom)
45
fl21
40
102
45
17.5
154
38
(Top)
7
45
19
152
178
7
152
38
Bolt M6
25
35
102
fl 21
25
40 102
fl 21
25
40
(61/8")155
(6")152
(11/2")
(61/8")
(6")
(11/2")
155
(1/2")
(1")(1/2")(1")(1/2")
(1/2") (1/2")
(61/8")
(11/2")
155(61/8")
(11/2")
(1") (1")
(19/16")
155
(4")
(13/16")
(13/4")
(4")
(13/16")(19/16")
(13/4")
(13/4") (61/16")
(4")
(19/16")
(13/4")(13/16")
(1/4")
(11/16")
(5/8")
(11/2")
(23/4")
(11/16")
(215/16")38
70
1874
(13/4")
(1/4")
(7")
(6")
(13/8")
(3/4")
P I VOT S E T S
H A N G E R S
FLEXIROL HANGERS (90° movement)
556/62/20
fl12
225
20 35
85
110
68
40
4022535
85
fl12
110
2323
556/63/40 556/62/40
5
221
458262
50
122
556 556/57 82
85
38
555 555/57 555/52
165
225
3881555/21
555/61
81
152
81
81
38
38
85
81
85
38
(27/16") (31/4")
(13/4")
(115/16")
(413/16") (11/2")
(33/8")
(31/4")
(31/4")
(31/4")
556/52
165
225
38
82
556/61
6
82
38
185
127
(87/8")
(5")
(11/2")
(3/16")
(61/2")
(75/16")
(1/4")
(11/2") (63/4")
556/21
81
81
82
152
38
5
44
172
(13/4")
(3/16")
(6")
(31/4")
(33/16")
(33/16")
(11/2")
(83/4")
556A/221
(33/16")
(11/2")
(33/16")
(33/16")
(6")
(11/2")
(33/8")
556/62/20
fl12
225
20 35
85
110
68
40
4022535
85
fl12
110
2323
556/63/40 556/62/40
5
221
458262
50
122
556 556/57 82
85
38
555 555/57 555/52
165
225
3881555/21
555/61
81
152
81
81
38
38
85
81
85
38
(27/16") (31/4")
(13/4")
(115/16")
(413/16") (11/2")
(33/8")
(31/4")
(31/4")
(31/4")
556/52
165
225
38
82
556/61
6
82
38
185
127
(87/8")
(5")
(11/2")
(3/16")
(61/2")
(75/16")
(1/4")
(11/2") (63/4")
556/21
81
81
82
152
38
5
44
172
(13/4")
(3/16")
(6")
(31/4")
(33/16")
(33/16")
(11/2")
(83/4")
556A/221
(33/16")
(11/2")
(33/16")
(33/16")
(6")
(11/2")
(33/8")
556/62/20
fl12
225
20 35
85
110
68
40
4022535
85
fl12
110
2323
556/63/40 556/62/40
5
221
458262
50
122
556 556/57 82
85
38
555 555/57 555/52
165
225
3881555/21
555/61
81
152
81
81
38
38
85
81
85
38
(27/16") (31/4")
(13/4")
(115/16")
(413/16") (11/2")
(33/8")
(31/4")
(31/4")
(31/4")
556/52
165
225
38
82
556/61
6
82
38
185
127
(87/8")
(5")
(11/2")
(3/16")
(61/2")
(75/16")
(1/4")
(11/2") (63/4")
556/21
81
81
82
152
38
5
44
172
(13/4")
(3/16")
(6")
(31/4")
(33/16")
(33/16")
(11/2")
(83/4")
556A/221
(33/16")
(11/2")
(33/16")
(33/16")
(6")
(11/2")
(33/8")
114 115114 115
fl 16
21K/PX(Top)
21B/P(Top)
(Bottom) (Bottom)
2513 13
13
38
13
45
38
13
45
(Bottom)
45
fl21
40
102
45
17.5
154
38
(Top)
7
45
19
152
178
7
152
38
Bolt M6
25
35
102
fl 21
25
40 102
fl 21
25
40
(61/8")155
(6")152
(11/2")
(61/8")
(6")
(11/2")
155
(1/2")
(1")(1/2")(1")(1/2")
(1/2") (1/2")
(61/8")
(11/2")
155(61/8")
(11/2")
(1") (1")
(19/16")
155
(4")
(13/16")
(13/4")
(4")
(13/16")(19/16")
(13/4")
(13/4") (61/16")
(4")
(19/16")
(13/4")(13/16")
(1/4")
(11/16")
(5/8")
(11/2")
(23/4")
(11/16")
(215/16")38
70
1874
(13/4")
(1/4")
(7")
(6")
(13/8")
(3/4")
P I VOT S E T S
fl16
fl10
67B/2012
70
20
40
67B/2012
70
40
20
47 68
40152
68B/2068BX/40
110
fl16
fl10
114
20
40
40
47 68
1325
102
155
38
13
89/2N 104N/94 104NX/94
21N/94
68B/2068BA/180
110
fl16
fl10
114
40
40
180
152
9
5448
25
35 80
16
32
23
58fl10
21R/94
133
106N/94
3
103
(57/8")150
(31/8")(13/8")
(3/8")
(5/8")
(1")
(21/8")(17/8")
(25/16") (3/8")
(11/4")
(7/8")
(3/8")
(51/4")
(7/8")
(11/4")32
23
(1")
(5/8")(41/16")
(1/8")
25
(11/2")
(61/8")
(1/2")
(4")
(1")
(1/2") (3/16")
(61/16")(4")
(13/4")
154
102
45
5
G U I D E S
21/550P
116 117116 117
HENDERSON
HENDERSON
201
55
fl32mm
9
90
55 55 46
46
101
38
25
42
4655
101
37
90
4655
101
(15/8") (11/2")
(1")
(113/16")(23/16")
(4")
(39/16")
(17/16")
(113/16")(23/16")
(4")
(23/16")
(4")
(3/8")
(113/16")
(11/4")
(39/16")
(23/16") (23/16")
(715/16")
(113/16")
G L A S S F I T T I N G S
EF07 EF03
EF01/4 EF01/2
67BA/150
20
fl10
110 40
(19/16")
(3/8")
(13/16")
(45/16")
68BA/110 68BA/180
110
fl16
180
12
70(23/4")
(45/16")
(5/8")
(71/8")
(1/2")
fl16
67BA/220
12
110
110
220
(45/16")
(5/8")
(1/2")
(811/16")
(45/16")
40
40
150(515/16")
(19/16")
(19/16")
G U I D E S
PACER ENDFOLD
67BA/150 67BA/220 68BA/110 68BA/180
116 117116 117
EF05 EF04
EF06
EF09Loose Bolt EF08
EF02
55 55
201
46
201
4655 55
55
fl16
4655
201
30
60
55
85
28
15
50
46
101
55
fl16
46
101
55
30
(23/16")
(715/16")
(23/16")
(113/16")(715/16")
(23/16") (23/16")
(113/16")
(715/16")
(23/16") (23/16")
(113/16")
(13/16")
(5/8")
(23/16")
(113/16")
(13/16")
(5/8")
(4")
(23/16")
(33/8")
(115/16")
(23/8")
(11/8")
(9/16")
(4")
(23/16")
(113/16")
G L A S S F I T T I N G S EF05 EF04
EF06 EF02
EF08Loose Bolt
✝ Standard hinge finishes: White (RAL 9010), Polished Anodized, Silver Anodized and Black Anodized.
For glass cutting dimensions contact Henderson.
88
41
F3734
HENDERSONHENDERSON
F3715 400333 454
HH3/30135
10
24
225
3
80
30
65
151
190
108
47
18
45
(87/8")
(3/8")
(515/16")
(5/16")
(15/16")
(13/8")
(71/2")
(15/8")
(5/16")
(41/4")
(17/8")
(11/16")
(31/8")
(13/16")
(1/8")
(1/4")
(11/8")
(13/4")
(13/8")
(13/4")
(29/16")
7
28
fl11
45
35
HH3/290
AC C E S S O R I E S A N D S TO P S
F3734 S7
HH3/301
F3715 333 454 400Pacer
Flexirol
HH3/290
EF09
118 119118 119
TRACK & CHANNEL
All tracks are in galvanized finish. Once installed they should be kept greased, to reduce wear and increase life. Any length of track is obtained by butting 2 pieces of track together and fixing a brack-et at the joint, and closed brackets at each end.
(ft) 280 290 301 301H 305 307
6 • • • • • •
8 • • • • • •
10 • • • • • •
12 • •
20 •
(ins) 280 290 301 301H 305 307
A 11/16 13/4 25/8 25/8 311/16 43/32
B 13/16 17/16 25/32 25/32 21/4 27/8C 18G 14G 14G 12G 12G 6G
(ins) 89 94 97 99A 1 3/4 11/2 11/2B 1 13/16 11/16 113/16C 12G 17G 12G 12G
118 119118 119
TRACK BRACKETS
All brackets are aluminum alloy die castings except where otherwise indicated.
Pressed steel brackets in painted finish.
Pressed steel brackets – galvanized.Fit closed brackets at track ends, or fit end-clips 1A/301 EC (for alloy brackets) or 1/301 EC (for steel brackets) in the case of all 301 track brackets. Jointing brackets are only required at track curve ends. Maximum brack-et spacing is every 3 ft.
Fig no. A B C D E Bolt
281 19/16 1/4 11/8 15/8 9/16 8G screw
1A/290 25/8 1/2 2 11/4 11/165/16
1/290/S 3 1/2 25/32 23/8 11/16 5/16
1A/301 313/16 3/4 27/8 21/4 13/8 1/21/301/S 315/16 5/8 27/8 23/8 115/32 1/21A/305 51/2 1 33/8 3 11/2 5/81/307/S 61/4 1 35/8 3 125/32 5/8
•
•
•
*
Fig no. A B C D E Bolt
9A/290 111/16 5/8 23/4 15/16 2 14G screw
9/301/S 29/16 15/32 415/16 11/2 31/2 18G screw
9A/305 35/16 11/2 65/16 25/16 51/8 1/29/307/S 35/16 2 71/4 22 3/32 51/2 5/8
*
*
Fig no. A B D E F Bolt
5/290 31/8 13/16 11/2 21/8 11/161/2
5/301 43/8 15/16 21/4 31/8 19/165/8
5/305 61/8 11/2 3 35/8 17/8 3/45/307/S 71/2 1 4 35/8 12 5/32 3/4*
Fig no. A B D E F Bolt
7/301/S 49/16 11/2 23/8 25/8 19/165/8*
Fig no. A B C D E Bolt
3A/290 27/32 - 31/4 11/4 21/2 5/16
3A/301 33/8 - 51/8 21/4 315/161/2
3/301/S 315/32 - 51/8 21/4 313/16 1/23A/305 43/4 - 65/8 3 415/16 5/83/307/S 67/32 - 71/4 31/2 51/2 5/8
*
*
Fig no. A B C D E Bolt
4A/290 25/8 - 17/8 3 23/8 5/164A/301 33/4 - 3 45/8 33/4 1/24A/305 53/8 - 31/4 71/2 51/8 5/84/307/S 61/4 - 35/8 71/2 51/2 5/8*
Fig no. A B C D E Bolt
4/301S 311/16 - 13/4 45/8 33/4 1/2*
Fig no. A B C D Bolt
4R/280S 113/16 2 13/8 13/8 3/84R/290/S 113/16 13/16 13/4 21/16 3/84R/301/S 29/16 21/4 29/16 31/16 1/24R/305/S 211/16 3 213/16 4 7/32 5/84R/307/S 213/16 3 39/16 4 9/32 3/4
•••••
Fig no. A B&E C D F Bolt
6/301 33/4 31/8 6 5 35/8 3/8*
Fig no. A B C D E F Bolt
8/301/S 37/8 5 7 45/8 25/8 35/8 1/2*
•*
120 121120 121
HANGERS /N = Nylon wheels /S = Steel wheelsNylon wheels are quieter and avoid the need to grease track to reduce wear. Hence their car-rying capacity is greater. For automatic doors halve the carrying capacity and use nylon wheels if possible.
DimensionsA B C D 0
37/16 11/4 11/8 17/16 13/32
55/8 23/4 111/16 27/32 5/8
55/8 23/4 111/16 27/32 5/8
63/8 23/4 111/16 3 5/8
87/16 33/8 21/4 37/16 13/16
DoorWeight
Capacity300 lbs.300 lbs.400 lbs.
600 lbs.800 lbs.
800 lbs.1000 lbs.
1500 lbs.
2500 lbs.4400 lbs.
Trackno.
290
301
301H
305
307
Hangerno.
56X/N56K/S
56K/S 20056A/S56A/N
56A/S56A/S
56C/S
56F/S56FJ/S
DimensionsA B C D E
37/16 33/4 21/4 17/16 11/2 17/8
55/8 7 3 27/32 13/4 21/4
55/8 7 3 27/32 13/4 21/4
63/8 7 3 3 13/4 21/4
87/16 15 21/2 37/16 23/4
DoorWeight
Capacity300 lbs.300 lbs.400 lbs.
600 lbs.800 lbs.
800 lbs.1000 lbs.
1500 lbs.
4400 lbs.
Trackno.
290
301
301H
305307
Hangerno.
53K/N53K/S
53K/S 20053A/S53A/N
53A/S53A/N
53C/S
53FJ/S
-
-
-
-
DimensionsA B C D
71/16 21/4 111/16 17/1671/16 21/4 111/16 27/32
211/2 31/4 2 3
Trackno.290301
301H305
Hangerno.
62K
62A
62C
DimensionsA B C D E
6 6 1 17/16 3/16
7 6 11/2 27/32 1/4
7 6 11/2 3 1/4
Trackno.
290
301301H305
Hangerno.
21K/S21K/N21K/4N21A/S21A/4S
21C/S
DimensionsA B C D 0
37/16 43/8 11/8 17/16 13/32
55/8 511/16 111/16 27/32 5/8
55/8 511/16 111/16 27/32 5/8
63/8 511/16 111/16 3 5/8
87/16 51/2 21/4 37/16 13/16
DoorWeight
Capacity300 lbs.400 lbs.
600 lbs.800 lbs.
800 lbs.1000 lbs.
1500 lbs.
2500 lbs.4400 lbs.
Trackno.
290
301
301H
305
307
Hangerno.
56KX/S56KX/N56AX/S56AX/N
56AX/S56AX/N
56CX/S
56FX/S56FJX/S
DimensionsA C D E F
37/16 1 51/2 1/16 1
55/8 23/8 75/161/16 11/2
55/8 23/8 75/161/16 11/2
63/8 21/2 75/161/16 11/2
Trackno.
290
301
301H
305
Hangerno.
57K/N
57A/S
57A/N
57C/S
DoorWeight
Capacity
300 lbs.
600 lbs.
1000 lbs.
1500 lbs.
DimensionsA C D1 D2 E F
37/16 1 3 2 51/4 1
55/8 23/8 4 5 61/2 11/255/8 23/8 4 5 61/2 11/263/8 21/2 4 61/2 11/2
Trackno.
290
301
301H
305
Hangerno.
52K/S52K/N
52A/S
52A/N
52C/S
DoorWeight
Capacity300 lbs.300 lbs.
600 lbs.
1000 lbs.
1500 lbs.
DimensionsA B C D4 21/4 111/16 17/164 21/4 111/16 27/32
87/8 31/4 2 3
Trackno.290301
301H305
Hangerno.
63K
63A
63C
DimensionsA B C D51/2 3/16 1 17/1671/4 1/4 11/2 27/32
71/4 1/4 11/2 3
Trackno.
290301
301H305
Hangerno.
61K/S
61A/S
61C/S
120 121120 121
GUIDES OTHERS
No. 31S Single Wall Mounted Stay Roller (Bi-parting doors) - Provides clear threshold - fit No. 128 shoe guide with center stop. Nylon Rollers, galv. steel angle.
No. 31D Double Wall Mounted Stay Roller (Double line) - Provides clear threshold - Nylon Rollers, galv. steel angle.
No. 126HD/A Ground Stay Rollers - Provides clear threshold - Nylon Rollers, covered by shields to prevent traffic damage. Galv. steel.No. 128 Shoe Guide with Center Stop Grey painted iron, adjustable. Center stop plate provided, for bi-parting doors.
No. 299 Curtailed Rail with Inverted No. 89 Channel to underside of doors. - Provides clear threshold - fit No. 128 shoe guide with center stop on bi-parting doors.
No. 126 Ground Stay Rollers - Provides clear threshold - fit No. 128 shoe guide with center stop on bi-parting doors. Galv. steel.
Most roller guides are fitted with brass rollers. The assemblies are rustproofed by electrozinc galvanizing. Fit two guides per door. Always specify channel type when ordering guides (eg 104P/97).
No. 1021/2 Side Guide Roller (Patented) Heavy duty plough guide, ideal for most applications. Malleable body with self-adjusting roller spindles. Use with channel No. 97.
No. 105R Roller Guide - General purpose guide suitable for most applications. Is economical yet very strong. Use with channel Nos. 89 or 97.
No. 106R Under Guide Roller - Steel plate with a brass roller. Ideal for small, light doors especially internal application. Not recommended for dirty conditions. Use with channel Nos. 89, 94, or 97.
No. 113R Side Guide Roller - Steel plate with a brass roller. Not recommended for heavy doors or dirty conditions. Use with channel Nos. 89 or 94.
No. 104P Under Guide Roller (Patented) - Brass roller used for metal doors. Easily removable without dismounting doors. Use with channel Nos. 89 or 97.
No. 104PX Long Under Guide Roller - Same as 104P but with extra long bolt.
No. 67 Intermediate Guide - folding doors No. 67/89 for track 290 and channel 89.No. 67/97 for track 301 or 301H and channel 97.No. 67C/97 for track 305 and channel 97.
No. 68 End Guide - folding doors No. 68/89 for track 290 and channel 89.No. 68/97 for track 301 or 301H and channel 97.No. 68C/97 for track 305 and channel 97.
No. 21R End Fold Guide - folding doors No. 21KR/94 for track 290 and channel 94.No. 21R/94 for track 301, 301H and 305.
No. 106R Center Fold Guide - folding doors No. 106R/94 for all tracks.
No. 994 Cane Bolt - No. 994 15" electro galvanized steel shoot with socket for concrete, when required.
No. 994X Offset Cane Bolt - No. 994X 15" electro galvanized steel shoot with socket for concrete.
No. 994R Roller Guide Cane Bolt - No. 994R electro galvanized steel shoot with brass roller. Use with channel Nos. 89 or 97.
No. 994S Locking Cane Bolt - No. 994S 15" electro galvanized steel shoot with socket for concrete. Use with padlock (Not by PCH).
No. 77 Flush Bolt - No. 77J suitable for framed doors with bottom rails up to 6" x 17/8 ". Gray painted steel.No. 77S suitable for framed doors with bottom rails up to 9" x 23/4 ". Gray painted steel.
No. 78 Flush Bolt - Designed for fitting to stile of flush doors minimum 5" x 13/4 ". Gray painted steel.
No. 333 Semi-Flush Bolt - 6" x 13/8 " aluminum alloy in satin anodized finish. No. 454 Semi-Flush Bolt - 71/2" x 19/16 " aluminum alloy in satin anodized finish.
No. 863 Bow Handle - Gray painted iron. 51/4" x 13/4 "
No. 463 Bow Handle - Gray painted iron. 61/4" x 17/8 "
No. 464 Bow Handle - Gray painted iron. 101/4" x 21/4 "
No. 400 Flush Pull - Aluminum alloy in satin anodized finish. 41/4" x 17/8" with 5/8" mortise.
No. 414 Flush Pull - Aluminum self finish. 51/4" x 21/2" with 3/4" mortise.
No. 413 Flush Pull - Heavy duty Gray painted iron. 6" x 33/4" with 1" mortise.
No. 115 Corner Protection Plates - Rustproofed by electrozinc plating - Fit a pair on the leading door edge.
No. 109 Single Wall or Ground Stop - Gray painted steel with rubber buffer. For light doors. Fit on wall, 2/3 up door height.
No. 107E Buffer Stop - Rubber. For fitting to slamming post when other stops cannot be used.
No. 107 Single Wall Stop - Gray painted steel with rubber buffers. For medium weight doors, fit one on wall, 2/3 up door height. For heavier door fit 2.
No. 431 Swivel Locking Bar - Rustproofed by zinc plating. For doors sliding on outside face of wall or for securing to end post. Use with padlock (Not by PCH).
No. 430 Detachable Locking Bar - Rustproofed by zinc plating. For Straight-Run doors sliding inside and locked outside. Use with padlock (Not by PCH).
No. 65 Back Flap Hinges - No. 65 for track 290, 301 or 301H. Aluminum. No. 65C track 305. Gray painted iron.
No. 403 Butt Hinge - No. 403/1 31/2" x 2" aluminum alloy.No. 403/2 4" x 21/8" aluminum alloy.No. 403/3 4" x 3" aluminum alloy.
Also available in steel to similar sizes and referred to as No. 37, No. 41, No. 42 respectively.