Huawei ELTE Broadband Trunking Products

On the Move!

Huawei eLTEBroadband Trunking Products

HUAWEI TECHNOLOGIES CO., LTD.

Bantian, Longgang District

Shenzhen518129, P. R. China

Tel:+86-755-28780808

2014

Single Site Network

Common Network

DBS3900

DBS3900

DBS3900

eCNS210 & eCNS230 eOMC910 eApp & HardwareDBS3900Rich Terminals

TerminalHuawei offers many types of terminals, including handset, vehicle radio, CPE, USB dongle, which act as transceivers to transmit all types of communication, including voice, data and video services.

EM710 EM720EG860

EP680/EP650 EP820 EV750

EP680/EP650The World’s 1st Broadband Trunking Handset

Professional Performance for Timely Response

Because quick transfer of accurate information is crucial for the efficient dispatch of urgent resources, the EP680/

EP650 handset supports a group call setup time of less than 300 ms and call pre-emptive time of less than 150

ms. Many other features of the handset also help ensure quick, accurate use in any emergency situation:

• Push-to-talk button

• Private call function

• Direct Mode Operation (DMO)

• TETRA, PLMN, and PSTN connectivity via the interoperating gateway

• Dual-microphone noise-canceling technology for a clear voice signal in 80-dB-noise environments and

recognizable voice in 100-dB-noise environments

Live Video Improves Efficiency

Live video is invaluable for conveying a person’s appearance or emergency situations, especially in noisy

environments where voice communications might not be clear. Integrated voice and video trunking helps

operating staff and field personnel get clear and complete information in real time. On-scene personnel can

transmit live video to command-and-control centers, which can then dispatch the video to other personnel as

needed.

High Reliability in the Harshest Environments

To deal with harsh working conditions, the EP680/EP650 is engineered to be waterproof, dustproof (IP67), and

shockproof (MIL STD 810F). This mobile terminal withstands the toughest conditions and provides the high levels

of in-field durability needed to drive down lifecycle support costs.

• Withstands multiple 1.5m drops per MIL STD 810F

• Operates reliably after 200 consecutive 1m tumbles

• Rated IP67 design with complete protection against water and dust

Versatile Connectivity

The EP680/EP650 works with many different types of connectivity:

• LTE TDD 400 MHz/1.4 GHz/1.8 GHz/2.3 GHz

• LTE FDD 800 MHz

03 04

3.5mm Headphone Jack

Dedicated Camera Button

5-Megapixel Camera for EP6801.3-Megapixel Camera for EP650

High-Output LED Flash

Rugged Accessory Port

Grip Material

Battery Release

PTT Mic

Emergency Call Button

The development of Mobile Broadband (MBB) has created a need

to integrate MBB with traditional trunking for efficiency and

performance. Based on an in-depth understanding of the requirements, Huawei has introduced the EP680 and

EP650 professional LTE broadband trunking handsets. Each of these handsets integrates voice, data, and video

services into a single device. Except for voice-only trunking, mobile users can communicate using video and

Geographic Information System (GIS) services at the same time, providing better collaboration between response

personnel. Compared with the EP650, the EP680 offers additional functions, such as a front camera, Bluetooth,

and Wi-Fi.

Multi-frequency-band Antenna

Voice tuning Knob

1.3-Megapixel Camera

(only for EP680)

Dedicated PTT Button

2.4-inch TFT Display

Ruggedized Construction

USB2.0 Port

Secondary Mic

• GPS, Determines position with an accuracy within 10m in open terrain

• 802.11 a/b/g/n Wi-Fi™ (Only EP680)

• Bluetooth v1.2/2.0/2.0 + EDR (Only EP680)

Secure Operation

For data, photos, video, or voice, the EP680/EP650 brings information to users quickly, reliably, and securely:

• Air interface encryption

• End-to-end encryption

• Remote terminal activation and deactivation

Stay in Control

A large-scale deployment of portable devices will pose challenges for IT staff. To help make it easier, EP680/

EP650 are compatible with Huawei eOMC610. It can be managed or configured in an integrated manner in the

monitor center – even able to delete data from a device that has been lost or stolen.

Huawei eLTE Broadband Trunking ProductsTerminal




05 06

EP680 EP650

Radio Section

Release 3GPP Release 9

Frequency band

LTE-TDD 400 MHz: 380 to 470 MHzLTE-TDD 1.4 GHz: 1,447 to 1,467 MHzLTE-TDD 1.8 GHz: 1,785 to 1,805 MHz LTE-FDD 800 MHz: 832 to 862 MHz (UL), 791 to 821 MHz (DL)

LTE-TDD 1.4 GHz: 1,447 to 1,467 MHzLTE-TDD 1.8 GHz: 1,785 to 1,805 MHz LTE-TDD 2.3 GHz: 2,300 to 2,400 MHz

Bandwidth

400 MHz band: 3 MHz/5 MHz/10 MHz/20 MHz800 MHz band: 5 MHz/10 MHz/20 MHz1.4 GHz band: 5 MHz/10 MHz/20 MHz 1.8 GHz band: 5 MHz/10 MHz/20 MHz

1.4 GHz band: 5 MHz/10 MHz/20 MHz 1.8 GHz band: 5 MHz/10 MHz/20 MHz2.3 GHz band: 5 MHz/10 MHz/20 MHz

DMO Supported (400 MHz to 470 MHz)

Power level

1.8 GHz frequency band: 25±2 dBm 1.4 GHz frequency band: 25±2 dBm 800 MHz frequency band: 25±2 dBm 400 MHz frequency band: 27±2 dBm DMO: 30±2 dBm

1.8 GHz frequency band: 25±2 dBm 1.4 GHz frequency band: 25±2 dBm 2.3 GHz frequency band: 25±2 dBm DMO: 30±2 dBm

UE capability Category 4

Connection Options

WLAN Wi-Fi 802.11 b/g/n Not Supported

Bluetooth Bluetooth v1.2/2.0/2.0 + EDR Not Supported

USB Mini USB 2.0

GPS Supported Not Supported

Hardware

Screen 2.4 inch QVGA 240 x 320 TFT

Camera Rear camera: 5 megapixelsFront camera: 1.3 megapixels

Rear camera: 1.3 megapixels

Memory MCP (1 GB DDR + 8 GB EMMC) MCP (1 GB DDR + 4 GB EMMC)

SIM Card Software-based SIM card

Port USB 2.0 High-Speed

3.5 mm audio jack (stereo)Accessory port

EP680&EP650

Battery

Battery Li-ion, 3.7V, 3,000 mAH

Battery time

Trunking mode (5:5:90) > 29 hoursTrunking mode (5:35:60) > 17 hoursLTE standby mode > 72 hoursVideo surveillance mode > 6 hoursDMO standby mode > 30 hours (DMO only)

Video

Supported Formats

Windows Media Video (WMV) 10, WMV 9, H.264

Video Recording Quality

CIF (176 x 144) resolution at 25 frames per second (fps)D1 (720 x 480) resolution at 25 fps720p (1,280 x 720) resolution at 25 fps1080p (1,920 x 1,080) resolution at 25 fps

Protection Level

Water & Dust Proof

IP67 sealed (complete protection from dust; protected against low-pressure jets)

Shock proof MIL STD 810F

Working temperature

-20℃ to +60℃

Storage temperature

-40℃ to +85℃

Physical Characteristics

Dimensions(H x W x D)

154 mm x 62.5 mm x 34.6 mm (not including external antenna)

Weight 380g (including battery)



07 08

EP820The World’s First Touch-screen Multimode LTE-broadband-trunking Smart HandsetThe Huawei EP820 professional LTE broadband trunking handset

integrates voice, data, and video services into a single device.

Except for voice-only trunking, group members can receive onsite video anywhere, providing better collaboration

between response personnel.

As a smart phone, the EP820 is based on the Android 4 OS and can access both public and private networks. The

EP820 is thus ideal for public safety, oil-and-gas work, and transportation, where users need flexible handovers

between the two networks. The handset’s 4.5-inch high-sensitivity touch screen can be used with a separate

keyboard for easy and accurate data entry.

Professional Performance for Timely Response

Because quick transfer of accurate information is crucial for the efficient dispatch of urgent resources, the EP820

handset supports a group call setup time of less than 300 ms and call pre-emptive time of less than 150 ms.

Many other features of the handset also help ensure quick, accurate use in any emergency situation:

• Push-to-talk

• Private call

• Direct Mode Operation (DMO)

• TETRA, PLMN, and PSTN connectivity via the interoperating gateway

• Dual-microphone noise-canceling technology for a clear voice signal in 80-dB-noise environments and

recognizable voice in 100-dB-noise environments

Live Video Improves Efficiency

Live video is invaluable for conveying a person’s appearance or emergency situations, especially in noisy

environments where voice communications might not be clear. Integrated voice and video trunking helps

operating staff and field personnel get clear and complete information in real time. On-scene personnel can

transmit live video to command-and-control centers, which can then dispatch the video to other personnel as

needed.

High Reliability in the Harshest Environments

To deal with harsh working conditions, the EP820 is engineered to be waterproof, dustproof (IP67), and

shockproof (MIL STD 810F). This mobile terminal withstands the toughest conditions and provides the high levels

of in-field durability needed to drive down lifecycle support costs.

• Withstands multiple 1.5m drops per MIL STD 810F

• operates reliably after 200 consecutive 1m tumbles

• Rated IP67 design with complete protection against water and dust

Exceptional Connectivity

The EP820 supports both GSM/UMTS and LTE TDD models. It works with many different types of connectivity:

• Private Network: LTE TDD 400 MHz

• Public 2G Network: GSM 850/900/1800/1900

• Public 3G Network: UMTS 900/1900

• 802.11 a/b/g/n Wi-Fi™

• GPS, determines position within 10m in open terrain

• Bluetooth 4.0 EDR

Secure Operation

For data, photos, video, or voice, the EP680/EP650 brings information to users quickly, reliably, and securely:

• Air interface encryption

• End-to-end encryption

• Remote terminal activation and deactivation

Can be Customized

Based on the Android 4 OS, the EP820 provides extensive Software Development Kit (SDK) interfaces. These

interfaces permit customizations to handle specialized requirements.

Voice tuning Knob

13-Megapixel CameraHigh-Output LED FlashRugged Accessory Port

Grip Material

Power Button

Programmable keys(Could be programmed as Dedicated Camera Button)

Battery Release

Extended Button

External keyboard

Dedicated PTT Button

2-Megapixel Camera

4.5 in Display, Advanced Capacitive

Touch Screen

PTT MicUSB 2.0 Port

Speaker

Ruggedized Construction

3.5 mm Headphone JackEmergency Call Button


09


10

Radio Section

Release 3GPP Release 9

Frequency band

Private NetworkLTE-TDD 400 MHz: 380 to 470 MHzPublic Network UMTS 900/1900GSM 850/900/1800/1900

Bandwidth 400 MHz band: 3 MHz/5 MHz/10 MHz/20 MHz

DMO Supported (400 MHz to 470 MHz)

Power level 380 MHz to 450 MHz: 26±2 dBm 450 MHz to 470 MHz: 22±2 dBmDMO: 30 ±2 dBm

UE capability Cat 4

Hardware

Screen 4.5 inch, capacitive, finger-driven touch screenDamage-resistant Corning® Gorilla® Glass

Camera Rear camera: 13 megapixelsFront camera: 5 megapixels

Memory MCP (2 GB RAM + 8 GB EMMC)

SIM Card Software-based SIM card for private networkHardware-based SIM card for public network

Port

USB 2.03.5 mm audio jack (stereo)Accessory portCharging port

Software

Operating System Android™ Open Source 4

Language Chinese/English/Spanish

Connection Options

WLAN Wi-Fi 802.11 b/g/n

Bluetooth BlueTooth 4.0 EDR

USB Mini USB 2.0

GPS Supported

Battery

Battery LI-ion, 3.7v, 4000mAH

Battery time

Trunking mode (5:5:90) > 32 hoursTrunking mode (5:35:60) > 16 hoursLTE standby mode > 68 hoursVideo surveillance mode > 4.5 hoursDMO standby mode > 30 hours (DMO only)

Video

Supported Formats Windows Media Video (WMV) 10, WMV 9, H.264

Video Recording Quality

CIF (176 x 144) resolution at 25 frames per second (fps)D1 (720 x 480) resolution at 25 fps720p (1,280 x 720) resolution at 25 fps1080p (1,920 x 1,080) resolution at 25 fps

Protection Level

Water & Dust Proof

Without keyboard: IP67 sealed (Totally protected against dust and Protected against low pressure jets )With keyboard: IP65 sealed (complete protection from dust; protected against immersion )

Shock proof MIL STD 810G

Working temperature -10℃ to +55℃

Storage temperature -30℃ to +60℃

Physical

Dimensions (H x W x D) 152 mm x 72 mm x 25 mm (not including external antenna)

Weight 350g (with battery, without keyboard )420g (with battery and keyboard)


11


12

Accessories for HandsetCarrying Accessories

Video Accessories

Professional Audio Accessories

Strap

Lightweight and durable.

Comfortable to wear around hand.

Keeps phone safe and handy.

USB HD Camera

This camera can be used in situations

where users need to keep their hands

free by wearing handsets on their waists

and external cameras on their helmets.

• Sensor resolution: 1,920 x 1,080

• Still image: 5 megapixel

Clip

Easy to install

Attaches handset securely to belt

Hand/Shoulder Speaker

Clipped to an epaulet or collar or held in the

hand, this speaker allows users to hear voice

communications clearly without holding the entire

handset.

Lightweight Neckband In-ear Headphone

Worn on the head with the PTT button on line, this

headphone suits active personnel such as police,

people on fast-moving vehicles such as motorcycles

or boats, or people who work with machine or

wind noise.

Noise-cancelling Headphone

By covering the ears, this headset helps protect

against loud noises in environments such as airport

taxiways or heavy manufacturing facilities.

Throat Vibration Mic Headphone

Worn on the neck, this headphone works well for

users who cannot wear a more bulky headphone,

such as people wearing helmets or gas masks.

Air Conduit Headphone

This device suits police and security personnel who

need an unobtrusive headphone.

13 14

EV750The World’s First Broadband Trunking Vehicle-RadioIntegrating Mobile Broadband (MBB) with traditional trunking improves personnel efficiency and performance.

The EV750 is the world’s first LTE broadband-trunking vehicle radio that integrates voice, data, and video services

into a single device. Except for voice-only trunking, users can communicate with video and GIS services at the

same time, providing better collaboration between personnel.

Professional Performance for First Responders

The transfer of timely and accurate information is critical for efficient dispatch of urgent resources. The EV750

professional trunking vehicle radio supports a group call setup time of less than 300 ms and a call pre-emptive

time of less than 150 ms, ensuring a timely response to any critical situation.

Multiband Operation Helps Users Stay Connected

To make use of whatever radio spectrum is available, the EV750 offers 400 MHz/800 MHz/1.4 GHz/1.8 GHz

multiband connectivity. The EV750 also supports fast frequency customization.

Function Expansion Interface for Maximum Versatility

A multi-function expansion interface enables attachment of devices such as USB/FE cameras.

Multiple Security Technologies to Protect User Information

To meet high-security communications requirements, the EV750 supports bidirectional authentication, air

interface encryption, and remote enable/disable terminal functions.

Antenna 1

Antenna 2DVI Interface

GPS Interface

Power Interface

Tuning Knob

Status Indicator 2.4-inch

TFT LCDMenuKey

ReturnKey

OK/ Speed dial key

Direction Key

Home/Hangup/Power Key

CallKey

Video UploadingKey

Programmable keys

Emergency Call key

Hand Microphone Port

Features and Benefits• LTE-compliant

Professional trunking service, video dispatch, and broadband data, all in compliance with the international

LTE-TDD standard

• GPS location

The ability to determine position within 10 meters in open terrain

• Clear voice

Clear voice signal generated by dual-microphone, noise-cancellation technology

• Security

Air-interface encryption, end-to-end encryption, and remote terminal activation and deactivation

• Programmable

Interfaces provided for customization to support future requirements

Specifications

Radio Section

Frequency band

TDD 1.8 GHz frequency band: 1,785 to 1,805 MHz 1.4 GHz frequency band: 1,447 to 1,467 MHz400 MHz frequency band: 380 to 470 MHz FDD 800 MHz frequency band: uplink: 832 to 862 MHz/downlink: 791 to 821 MHzDMO 400 to 470 MHz

Transmission Power

1.8 GHz frequency band: 25 ±2 dBm 1.4 GHz frequency band: 25 ±2 dBm 800 MHz frequency band: 25 ±2 dBm 400 MHz frequency band: 27 ±2 dBm DMO: 30 ±2 dBm

Physical Characteristics

Dimensions (H x W x D) 1. Control head: 67 mm x 187 mm x 40 mm2. Transceiver only: 50 mm x 170 mm x 140 mm

Weight ≤ 1,500g

Screen 2.4-inch TFT LCD with QVGA resolution (240 x 320 pixels)

Memory MCP (1 GB DDR + 8 GB EMMC)

Case Hardened

Protection level IP54

Shock proof ETS 300 019-1-5 Class 5M4

Working temperature -20°C to +60°C

Connection Options

WLAN Wi-Fi 802.11b/g/n

Bluetooth Bluetooth Version 1.2/2.0/2.0 + EDR

USB Mini USB 2.0



EG860Industrial Grade CPEThe EG860 is a Long-Term Evolution (LTE) wireless Customer Premises Equipment

(CPE) device for enterprise networks. This compact unit features centralized fault

detection and recovery along with remote management for easy deployment

of current and future broadband resources. Serving as a wireless gateway for

high-speed data services, the EG860 complies with LTE 3GPP standards. The unit

incorporates a built-in antenna in an anti-lightning, shockproof, dustproof, and

waterproof enclosure for withstanding harsh environments.

Highlights• High Performance

The EG860 supports multiple uplink to downlink ratio configurations, including 3:1 for streaming data-

intensive uplink services such as video surveillance and data collection.

• Strong Protection

The EG860 is built to withstand extreme weather conditions and meet industry requirements for protection

from shock, water, dust, and lightning.

• Easy Maintenance

The EG860 supports a web-based Graphical User Interface (GUI) for remote management and maintenance,

while LED indicators enable on-site status checks. The remote management features simplify deployment of

current and future broadband resources as well as centralized fault detection and recovery.

• Multi-Frequency

The eA660/EG860 has a built-in DHCP server and provides DNS client and Network Address Translation (NAT)

services for flexible networking options. The EG860 offers a wide range of licensed and unlicensed mobile

access frequencies (400M/800M/1.4G/1.8G/2.3 GHz) to accommodate existing broadband resources.


15

Specifications

Environment Specifications


Anti-shock capabilities ETS 300 019-1-5 class 5M3

Working temperature -40°C to 60°C

Storage temperature -40°C to 70°C

Relative humidity 5% RH to 95% RH


16

Radio Specifications

Technical standards WAN: LTE 3GPP Release 9LAN: IEEE 802.3/802.3uWLAN: Wi-Fi 802.11b/g/n

UE capability level Category 4

LTE Operating Bands

LTE-TDD 400M: 380 MHz to 470 MHzLTE-TDD 1.4G: 1447 MHz to 1467 MHzLTE-TDD 1.8G: 1785 MHz to 1805 MHzLTE-FDD 800M: 832 MHz to 862 MHz Uplink791 MHz to 821 MHz Downlink

WLAN Operating Bands 2.4G: 2.401 GHz to 2.483 GHz

Working bandwidth

400 M: 3 MHz/5 MHz/10 MHz/20 MHz800 M: 5 MHz/10 MHz/20 MHz 1.4 G: 5 MHz/10 MHz/20 MHz 1.8 G: 5 MHz/10 MHz/20 MHz

Physical Specifications

Dimensions (H x W x D) 240mm × 200 mm × 60 mm

Weight 2000 g

Power consumption ≤ 30 W

Power supply PoE, 24V DC

External ports 1 Ethernet port (RJ45)2 External antenna port (N) 1 SIM card slot (supports software SIM card)

Installation mode Gin pole / wall mounted

EM710Industrial Grade USB Dongle

The Huawei EM710 USB dongle provides Long-Term Evolution (LTE) network access for enterprise users. With the

EM710’s powerful data capacity, users can perform mobile office work using PCs or other devices that have USB

interfaces.

Users connect the EM710 to a PC through a USB interface, and the EM710 accesses an LTE network for users to

log in to enterprise office-automation and email systems, browse web pages, and download data. Users can also

connect the EM710 to a device that has a USB interface and runs Microsoft Windows XP/VISTA/7 OS.

Highlights• Maximum transmission rate: DL 100 Mbit/s, UL 50 Mbit/s

• Enables Internet access, data uploading and downloading

• Frequency band: 1.4G/1.8G

• Supports MIMO and 64 QAM

• Working temperature: -20℃ to +70℃

• Supports WINXP/WIN7/VISTA, automatic installation


17

Hardware Technical Specifications

Supported frequency band 1.8G: 1,785 to 1,805 MHz 1.4G: 1,447 to 1,467 MHz

Power level 1.8G: 23 ±2 dBm 1.4G: 23 ±2 dBm

Bandwidth 1.8G: 5 MHz/10 MHz/20 MHz 1.4G: 5 MHz/10 MHz/20 MHz

Sensitivity 5 MHz: -100 dBm 10 MHz: -97 dBm 20 MHz: -94 dBm

UE capability Cat 4

Modulation QPSK, 16QAM, 64QAM uplink QPSK, 16QAM, 64QAM downlink

Dimensions (L x W x D) 85 mm x 43 mm x 10 mm

Weight 45g

Power supply USB 5V

Power consumption Average power consumption: 4.53W

Interface Mini USB 2.0

Operating temperature -20℃ to +60℃

Storage temperature -40℃ to +70℃

Humidity requirement Relative humidity: 5% to 95% ( noncondensing )

Indicators Blue LED

SIM type Soft SIM

Safety requirement Meets EN60950: 2001

SAR CE: EN62311, EN62209-2 FCC: IEEE C95.1

EMC EN55022 Class B ComplianceContact discharge: Min 6 kV, Ref 8 kVAir discharge 12 kV, Ref 15 kV

Certification China radio transmission equipment Type Approval ( CTA ) CE certified RoHS

Specifications

18




19 20

EM720Industrial-Grade Mobile HotspotIn addition to eLTE terminals, enterprise customers can take advantage of many Wi-Fi-enabled peripheral devices

using the EM720 mobile Wi-Fi hotspot. The EM720 gives Wi-Fi-enabled devices access to the LTE broadband

network and has a large battery capacity that can be used for mobile charging.

Specifications

Portable Wi-Fi Hotspot

The EM720 is a small Wi-Fi hotspot that enables devices such as pads, PCs, mobile phones, and PDAs to browse web

pages and download data via the LTE network.

Mobile Charger

With a 6,000 mAH battery capacity, the EM720 can charge most mobile devices at least twice.

PC Management

Supports Windows 7, automatic installation

EM720

BaseStation

BaseStation

BaseStation

Broadband Access

Mobile Charger

LTE

Radio Specifications

ProtocolsLTE: 3GPP Release 9Wi-Fi: IEEE 802.11b/g/n

Frequency bandsLTE TDD 1.8 GHz: 1,785 to 1,805 MHz LTE TDD 1.4 GHz: 1,447 to 1,467 MHzWi-Fi 2.4 GHz: 2,412 to 2,472 GHz

Power level1.8 GHz: 24 ± 2 dBm1.4 GHz: 24 ± 2 dBm

Bandwidth1.8 GHz: 5 MHz/10 MHz/20 MHz 1.4 GHz: 5 MHz/10 MHz/20 MHz

Sensitivity5 MHz: -100 dBm10 MHz: -97 dBm20 MHz: -94 dBm

ModulationUplink: QPSK, 16 QAM, 64 QAM Downlink: QPSK, 16 QAM, 64 QAM

UE capability Cat 4

Max WI-FI rate 300 Mbit/s

Hardware Specification

Dimensions (L x W x D) 121 x 70 x 23.5

Stand battery LI-ion, 3.7v, 6000mAH

Input power 5V 1.5A

Output voltage 5.2V DC±10%

Output current 1A

Operating temperature -10℃ -45℃

Storage temperature -20 to 60℃

Humidity requirement 10％〜 85％ RH

External Port Mini USB 2.0

Working Time

Stand By Time 14 hours (LTE stand-by, Wi-Fi on)

Working Time 10 hours (-95 dB, single user uploading data)

Base StationHuawei promotes a distributed base station DBS3900 for eLTE solution. The DBS3900 fully utilizes Huawei platform resources and a variety of technologies to meet the challenges of mobile network development.

Huawei eLTE Broadband Trunking ProductsBase Station

DBS3900eLTE Distributed Base Station

Used for radio access in an eLTE system and as an enterprise base station, the DBS3900 suits a wide range of

applications that require precise Base Transceiver Station (BTS) capabilities. The DBS3900 includes two basic types

of modules: a Base Band Unit (BBU) and a Remote Radio Unit (RRU). These modules can be flexibly configured

to meet a variety of usage requirements. In addition, the DBS3900’s small size, low power consumption, and

flexible installation enable easy deployment.

High Performance Mobile Broadband Access Network

The DBS3900 supports high data rates. Downlink and uplink rates can reach up to 100 Mbit/s and 50 Mbit/s @

20 MHz per cell, respectively. For coverage of remote sites such as offshore drilling platforms, the DBS3900 can

provide ultra-long-distance coverage up to 100 kilometers. For railways, the DBS3900 provides up to 430 km/h

high-speed train coverage.

World’s Leading Professional Broadband Trunking

Based on LTE technology, the Huawei DBS3900 is the world’s leading professional broadband trunking solution.

Its advanced features include priority call, call hold, late entry, dynamic grouping, and fallback mode. In addition,

the DBS3900 provides outstanding performance for traditional trunking with a group call setup time less than

300 ms and a pre-emptive priority call time less than 150 ms. Combining voice and real-time video trunking

in the same base station reduces Capital Expenditure (CAPEX) costs compared to traditional trunking and data

service solutions.

Multiband for Diversified Frequency Resources

The DBS3900 supports multiple frequency bands, including LTE-TDD 400 MHz/1.4 GHz/1.8 GHz/2.3 GHz and LTE-

FDD 800 MHz. Wide frequency band availability simplifies network deployment and allows the system to adapt

to various frequency policies with higher flexibility.

23

Huawei eLTE Broadband Trunking ProductsBase Station

Features & Benefits• Mobility Management

• Ultra High Speed Mobility

• Extended Cell Access Radius

• Network Security

• Voice over IP (VoIP)

• Trunking Voice Services

• Location Services (LCS)

• Way Antenna Extension

Supports 2 x 2 MIMO and 4 x 2 MIMO

Supports UE Category 2/3/4

• Smart Network Configuration and Optimization

• Reliability

1+1 Backup of the eNodeB Main Control Board

Baseband Board Backup (CPRI Backup)

• Transmission Networking

• Admission and Scheduling

Active Queue Management (AQM)

Radio/transport resource pre-emption

• Power Saving

Intelligent power-off of carriers in the same coverage

Power Supply Unit (PSU) intelligent sleep mode

Symbol power saving

Distributed Base Station (DBS3900)

Multiple frequency bandsTime Division Duplex (TDD): 400 MHz/1.4 GHz/1.8 GHz/2.3 GHzFrequency Division Duplex (FDD): 800 MHz

Bandwidth400MHz: 3M/5M/10M/20MHz1.4GHz: 10M/20MHz800M/1.8G/2.3GHz: 5M/10M/20MHz

Synchronization GPS, IEEE 1588v2

System availability ≥ 99.999%

Mean Time Between Failures (MTBF) ≥ 155,000 hours

Mean Time to Repair (MTTR) ≤ 1 hour

System reset time < 450 seconds

Base Band Unit (BBU) Height 2 U

Weight ≤12 kg (Max. configuration)

Power supply voltage -48 V DC (voltage range: -38.4 V DC to -57 V DC)

Average power consumption 165 W (Typical configuration)

Maximum configuration One BBU for 12 RRUs


Working temperature –20°C to +55°C

Relative Humidity 5% RH to 95% RH

Remote Radio Unit (RRU) Power supply voltage -48 V DC, 220 V AC

Weight ≤24 kg


Working temperature -40℃ to +55℃ Relative Humidity 5% RH to 100% RH

Specifications

24

Core NetworkThe Evolved Packet Core (EPC) framework provides a host of benefits for customers seeking converged voice and data solutions. As an industry leader in EPC, Huawei offers a solution based on an advanced Long-Term Evolution (LTE) EPC platform, built to meet enterprise requirements. The Huawei Enterprise LTE (eLTE) solution customizes the Enterprise Core Network System (eCNS) for corporations and government agencies.

Huawei eLTE Broadband Trunking ProductsCore Network

27

eCNS210eLTE Core Network for Large NetworksThe eCNS210 compact Evolved Packet Core (EPC) system is ideal for dedicated enterprise networks, with a high

level of integration, reliability, and interoperability. To handle the requirements of enterprises, the eCNS210

supports a diverse range of services, including voice, video, and data. Additionally, this system offers the

preferred model for broadband trunking.

High Performance

With a pedigree in LTE/EPC product development, the eCNS210 supports up to 40 Gbit/s throughput with

200,000 subscribers and 20,000 trunking groups. This product can be deployed to meet current and future

needs, such as carrying voice, dispatching commands, exchanging operational data, delivering video, and more.

In addition, the eCNS210’s Quality of Service (QoS) mechanism ensures critical data transmission in any situation.

High Integration

A typical public LTE core network incorporates the Mobility Management Entity (MME), Serving Gateway (SGW),

Packet Data Network Gateway (PGW), Home Subscriber Server (HSS), and Policy And Charging Rules Function

(PCRF) network elements. The eCNS210 integrates all of these elements into one subrack, enabling network

deployment with minimal integration effort. The system’s high level of integration also reduces deployment risk

and minimizes setup time. Enterprises can avoid over-commitment of valuable resources to engineering efforts

and reduce operational and capital expenditures.

High Reliability

Based on an Advanced Telecommunications Computing Architecture (ATCA) hardware platform, the eCNS210

products are designed to operate with high reliability from the system architecture to the components.

Industry-standard ATCA hardware supports varying degrees of redundant configurations to match application

requirements:

Hardware: 1+1 board backup and eCNS geography redundancy

Software: Overload control, fault prevention, automatic data backup, and operational security management.

These reliability mechanisms ensure an eLTE core network availability of 99.999%.

DBS3900

DBS3900

DBS3900

SGiInterface

ApplicationServer

S1Interface

S1Interface

SGiInterface

eCNS210

Internet

Dispatcher System


28

Features & Benefits• Mobility Management

• Security Management

• Session Management

• Integrated Subscriber Data Management

• Trunking Voice Services

• Reliability

eCNS Redundancy

1+1 eCNS Board Backup

• Quality of Service (QoS)

• QoS Profile Control Based on Security Parameter

Index (SPI) • Traffic Management

• Security Management

NAS Encryption and Integrity Protection (AES)

NAS Encryption and Integrity Protection (SNOW3G)

Operation and Maintenance (O&M) SSL

• Bidirectional Forwarding Detection (BFD)• Offline Charging• Interoperability with Public LTE• Routing

• IP Network Management Roaming

IP Network Management

Routing

Network Time Protocol (NTP)

Virtual Local Area Network (VLAN) Support

Eth-Trunk

• Routing Behind

Physical Specifications

Subrack dimensions (H x W x D) 622mm x 442 mm x 437 mm

Subrack weight < 93 kg (Full configuration)

Power supply -48 V DC

Working temperature Long term: 0℃ to +45℃ Short term: -5℃ to 0℃ , +45℃ to +55℃

Storage temperature -40°C to 70°C

Relative operating humidity Long term: 5% RH to 85% RH Short term: 85% RH to 95% RH

System availability ≥ 99.999%

Mean time between failures (MTBF) ≥ 322,580 hours

Mean time to repair (MTTR) ≤ 1 hour

Performance Specifications

Maximum subscribers 200,000

Maximum eNodeBs 1,500

Maximum throughput 40 Gbit/s

Maximum groups 20,000

Specifications


29

eSCN230eLTE Core Network for SME Network

The eSCN230 is a 2U LTE integrated Evolved Packet Core (EPC), which provides a compact, cost-effective

broadband trunking solution. This solution offers high reliability and is ideally suited for Small- and Medium-sized

Enterprise (SME) networks.

Miniaturization and High Integration

With the goal of building SME networks, Huawei has designed the highly-integrated eSCN230 by combining a

Home Subscriber Server (HSS), Serving Gateway (SGW), Mobility Management Entity (MME), and Packet Data

Network Gateway (PDN-GW) in a 2U, lightweight box. This easily deployed system provides exceptional flexibility

for low-density-subscriber-area deployments.

Dual Backup for High Reliability

The eSCN230 supports dual-backup operation to achieve high reliability. In dual-backup mode, two eSCN230s

work in a data-plane-based load-balancing configuration with active sessions for all connected users to minimize

user data loss. This active connectivity maintenance improves system reliability.

Interconnection and Interoperability

The eSCN230 allows eLTE users to communicate with Terrestrial Trunked Radio (TETRA), Public Switched

Telephone Network (PSTN), and Public Land Mobile Network (PLMN) users as well as other external systems via

connections with intersystem gateways. With this high level of interoperability, organizations can build a unified

communications system and handle voice and video services across the entire system.


30

Features & Benefits• PTT Services

• Data Services

• User and Group Management

• Backup function

Supports dual machine backup (Disaster Recovery)

• PS Pool Function

The eSCN230 carries out load balancing functions

whereby Packet Switched (PS) services can be shared

between two working eSCN230. When one of the two

systems fail, the other eSCN230 can immediately take

over all the PS services and ensure that they continue.

• Transmission Service Function

• Transmission Configuration Function

• Operation and Maintenance (O&M) Function

• Routing behind the Mobile Station (MS)

• Interoperable with Trans European Trunked

Radio(TETRA), Public Switched Telephone

Network (PSTN), and Public Land Mobile

Network (PLMN)

Specifications

Performance Specifications

Maximum subscribers 4,000

Maximum groups 512

Maximum eNodeBs 50

Maximum throughput 2 Gbit/s

Hardware Specifications

Dimensions (H x W x D) 86 mm x 442 mm x 310 mm

Weight ≤ 6.85 kg (Full configuration)

Power supply –48 V DCVoltage range: -38.4V DC to -57V DC

Power consumption 110 W

Heat dissipation mode Air-cooled ( Air enters from the left and exits to the right )

Working temperature –20℃ to 50℃ ( long-term) 50 ℃ to 55 ℃ ( short-term)

Operating relative humidity 5% RH to 95% RH


System availability ≥ 99.999 %

Mean Time Between Failures (MTBF) ≥ 155,000 hours

Mean Time to Repair (MTTR) ≤ 1 hour

Network Management SystemHuawei’s Network Management System (NMS) centrally manages mobile Network Elements (NEs), including the core network, base stations, and terminals. The NMS provides management functions such as configuration, performance, fault detection, security, logs, topology, software, and system management.

33

Huawei eLTE Broadband Trunking ProductsNetwork Management System

eOMC910Network Management System for Fixed Network and Wireless Device MaintenanceThe eOMC910 acts as an operation and maintenance center for all primary eLTE network elements, including the

core network, base station, dispatching server, and wireless devices. The administrator can easily perform system

configuration, software upgrades, equipment diagnostics, and performance monitoring via a graphical interface.

Unified Maintenance PlatformThe eOMC910 is the only NMS system that can manage a fixed network as well as wireless devices. The system

provides a unified network view and supports the integrated management of handheld devices, broadband

access terminals, eNodeBs, core networks, and an eMDC610 on trunking networks, as well as third-party

equipment. Remote management for wireless devices significantly reduces maintenance costs and increases radio

network deployment efficiency.

Wireless Device Core Network Dispatching ServerBase Station

eOMC910

Huawei eLTE Broadband Trunking ProductsNetwork Management System

34

Powerful Equipment Management The eOMC910 provides an extensive network management platform, including management of topology,

configuration, performance, fault detection, software, security, system, terminal, logs, and equipment preventive

maintenance.

Standard Hardware PlatformThe eOMC910 is based on a standard workstation server or PC. Several server types can be used to adapt to the

network scale. A PC can be used for a very small network to minimize costs or for a vehicle-mounted solution

with limited space. A powerful server suits a large network or a network that requires exceptional reliability. An

existing server or PC can be repurposed for running the eOMC910 software.

*Note:

Mode 1: eOMC server manages both network (including core network and base station) and wireless devices

Mode 2: eOMC server manages wireless devices only

PC Small Server Medium Server Large Server

Mode 1 10 base stations and 1,000 wireless devices

50 base stations and 4,000 wireless devices



Mode 2 5,000 wireless devices

10,000 wireless devices 40,000 wireless devices

100,000 wireless devices

HardwareSpecifications

CPU: Intel E5300Memory: 2 GBHard disk: 160 GBDVDRW/network adapter/audio adapter/sound box/LCD display with a resolution of 1,024 x 768 x 65KOS: Microsoft Windows 7.0

CPU: 2* Intel Xeon E5-2620( 2.00GHz, 15M Cache, 7.2GT/s QPI, Turbo, 6C 95W)Memory: 2 x 8GB, 1600Mhz, dual arrays, LVRDIMMsHard disk: 3*600GB, 2.5-inch, 10K RPM, 6 Gbit/s, SAS, hot-swappable

CPU: Intel Xeon E5-2690 (2.90 GHz, 20M cache, 8.0 GT/s QPI, Turbo, 8C, 135W)Memory: 2 x 16 GB, 1,600 MHz, dual arrays, LVRDIMMsHard disk: 6 x 600 GB, 2.5-inch, 10k RPM, 6 Gbit/s, SAS, hot-swappable

CPU: Intel Xeon E5-4620(2.40 GHz, 16M cache, 8.0 GT/s QPI, Turbo, Octa-core, 95W) Memory: 4 x 16 GB,1,600MHz, dual arrays, LVRDIMMsHard disk: 9 x 600 GB, 2.5-inch, 10k RPM, 6 Gbit/s, SAS, hot-swappabl

Dispatch SystemHuawei’s eAPP dispatching platform provides a GUI for comprehensive exchange of dispatch information, including voice, data, and video. This platform interoperates with the PLMN, PSTN, and trunking systems.

Dispatch PlatformFor public safety, traffic, energy, and similar organizations, a wideband trunking dispatch service brings new

efficiencies with voice, data, and video communications. Huawei’s reliable, high-performance dispatching

system ensures timely information sharing for decision-making and quick transmission of commands. Huawei’s

dispatching platform can meet requirements for a wide range of application scenarios.

Huawei eLTE Broadband Trunking ProductsDispatch System

Huawei Dispatching System

Vehicle Scenario

Server Disk Array

Single Station or Small Network Scenario

Large Network Scenario

eMDC610: Multimedia Dispatching and Processing CenterProvides dispatch services such as trunking, video, and Short Messaging Service (SMS), at the heart of the eAPP system.

eMRS610: Multimedia Recording and Playback Server Provides media recording, on-demand services, media management, and access to cameras.

PLMN/PSTN/TETRA GatewayProvides interworking function with PLMN/PSTN/TETRA.

Video/Audio DecoderSupports variable network transmission protocols and bit rates to decode and output video streams

eDC610: Dispatching ConsoleManages services such as voice, video, SMS, Multimedia Messages (MMs), and Global Positioning System (GPS) location.

PLMN Gateway PSTN Gateway TETRA Gateway

HD Decoder

37

Multimedia Dispatching with Rich Functionality• Voice trunking, force preemption and release, dynamic grouping, and temporary group call

• Short messaging and multimedia messaging for point-to-point and point-to-multipoint

• Portable terminal video transmission, distribution, and transcoding

• Geographic Information System (GIS): Mobile terminals report real-time location data, and the dispatching

console displays GIS location data.

Key Features• Easy deployment: All terminals can be remotely configured, and all policies (such as user permissions) are

managed by dispatching consoles.

• High reliability: Core devices, such as the dispatcher and base station, can take advantage of dual-host

standby to avoid a network-wide breakdown in the case of a single-host failure.

• Distributed deployment mode: Since IP networks are used for transmission, the system works with data

links such as Metropolitan Area Networks (MANs), optical fibers, and satellite links. Unlike conventional voice

communication that is constrained by the transmission distance of copper cables, the devices in the eAPP

system can be far apart from each other.

• Ample communication modes: The system can interwork with a wide variety of networks and devices such

as PSTN, GSM, Wi-Fi, TETRA, MT1327, and satellite networks and devices.

• Various secondary development interfaces: Interfaces to upper-layer applications provide smooth

application migration or low-cost development of new applications by customers and partners.

The dispatching platform works with application scenarios involving large networks, small networks, vehicles,

and single-station rapid deployment. The following table lists the typical configurations in each scenario.

Application scenarios Large network scenario

Small network scenario

Rapid deployment

system

Maximum registered users 200,000 4,000 100

Maximum registered groups 20,000 512 40

Maximum concurrency PTT users 2,000 512 40

Maximum base stations 1,500 30 1

System throughput

1 eCNS210 for 40 Gbit/s 1 eSCN230 for 2 Gbit/s

320Mbit/s2 eCNS210 for 80 Gbit/s(PS pool mode)

2 eSCN230 for 4 Gbit/s (PS pool mode)

Huawei eLTE Broadband Trunking ProductsDispatch System

38

eLTE RapidIntegrating baseband processing, packet data switching, and scheduling functions, the eLTE Rapid Deployment Broadband Trunking System (eLTE Rapid) significantly reduces network deployment time with easy assembly. This system ensures that first responders communicate quickly, anytime, anywhere.

Huawei eLTE Broadband Trunking ProductseLTE Rapid

41

eLTE RapideLTE Rapid Deployment Broadband Trunking System

Prevent lost time due to broken communications in emergencies or weak signals during event, Huawei’s eLTE

Rapid can be deployed in 15 minutes for immediate communications. With its small footprint, eLTE Rapid

increases network deployment flexibility and ensures that first responders can communicate anytime, anywhere.

High-level integration and wide, flexible coverage

• Integrates baseband processing, packet data switching, and scheduling functions into a 2U-height device.

• Provides, schedules, and manages voice, data, and video services. Routes and manages user data.

• Requires only one unit to cover an area up to 50 square km.

• For special coverage requirements, one RRU can connect to an eLTE Rapid for a maximum distance of 10 km,

providing significant coverage flexibility.

Fast deployment for first responders and wide environmental adaptability

• Compact design allows operators to quickly deploy a complete broadband trunking system — a crucial

requirement for emergency response.

• Requires no parameter configuration, no on-site wireless networking planning, no on-site account, no IP

configuration or pre-programmed group, with typical deployment in 15 minutes.

• Installs inside vehicles without modifying the vehicles (vehicle mode) to set up emergency communications in

accident locations or for mobile communications. Can also be carried on foot (back-pack mode).

• Provides multiple frequencies, including 400 MHz/1.8 GHz, and multiple bandwidths such as 5 MHz, 10 MHz,

and 20 MHz, to help vertical industries deploy networks conveniently.

Optimized base station with the latest trunking services

• Delivers 320 Mbit/s maximum data throughput.

• Enable fast setup: group call setup time < 300 ms; pre-emptive call setup time < 150 ms.

• Features built-in video, data acquisition, and GIS services.


42

Laptop

(eOMC and eDC)

Signal Cable

Power Cable

Power distribution

eMDC

eSCN231

eRRU

Battery

Switch

Back Pack Mode

Vehicle Mode

High Gain Antenna

Antenna Bracket

Antenna Box

Main BoxRF BoxPower Supply Box


43

Features and BenefitsApplication Scenarios

• P2P voice call

• P2P video call

• Trunking group call

• Emergency call

• High-speed data service

• Short data service

• State message

• Video surveillance

• Portable terminal video sending

• Video projection

• Video distribution

• Combined services collaboration

• GIS

• Call group scanning

• Floor pre-emption

• Late entry

• Forced release

• Break-in by a dispatching console

• Time-limit call

• Group and user status display

• Alias display of group and user

• Broadcast call

• Dynamic regrouping

• Call forward

• Call data record

• Temporary group call

• Talking party identification

• Barring of incoming/outgoing calls

• Remotely enable/disable terminal

• Audio/Video recording

Disasters Relief

Mobile City Security

Main Events Security


44

Specifications

Performance specifications

LTE Operating Bands LTE TDD 400M: 380–450 MHz ,

1.8G : 1785–1805 MHz

Maximum users 100

Maximum simultaneous voice calls 40

Maximum simultaneous video calls 20

Hardware specifications

Main box (Mandatory) Dimensions (H x W x D) 559 mm x 568 mm x 286 mm

Weight ≤ 35 kg (standard configuration)

Radio unit box (Mandatory) Dimensions (H x W x D) 559 mm x 568 mm x 286 mm

Weight ≤ 35 kg

Power supply box (Optional ) Dimensions (H x W x D) 559 mm x 568 mm x 286 mm

Weight ≤ 35 kg

Antenna box (Optional ) Dimensions (H x W x D) 285 mm x 469 mm x 1458 mm

Weight ≤ 17 kg

Vehicle Mode Dimensions requirement 1500 mm x 700 mm x 1200mm

Power specifications

Input power 220V AC; Voltage range: 100V AC to 240V AC

Power consumption < 580W (400 MHz) < 530W (1.8 GHz)

Environmental specifications

Working temperature -20℃ to +55℃

Protection level

• During device delivery, the protection level is IP44 as the cover of the box holding the cabinet and device panels are fixedly installed.

• During device operation, the protection level is IP23 as the cover of the box holding the cabinet and device panels are removed or open.

MTBF ≥ 100,000 hours

MTTR ≤ 0.5 hours

System starting time < 5 minutes

On the Move!

Huawei eLTEBroadband Trunking Products

HUAWEI TECHNOLOGIES CO., LTD.

Bantian, Longgang District

Shenzhen518129, P. R. China

Tel:+86-755-28780808

2014

Huawei ELTE Broadband Trunking Products

Documents

Transcript of Huawei ELTE Broadband Trunking Products