HTH Products Catalogue FF2008!08!240 275
Transcript of HTH Products Catalogue FF2008!08!240 275
FF 8.240
8
New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (H
TH F
urni
ture
Fitt
ing
2008
).
⌫
⌫
⌫
Sliding Door Fittings, Roller ShuttersPivot Sliding Door Fittings
Set
Adjustable guide bolt installation
Application
Guide bolt, adjustable
Guide bolt
Packing: 1 or 50 sets
Installation of pivot sliding door fitting
Track, length 140 mm
Track, length 575 mm
Allen key
⌫ ⌫ ⌫ ⌫ ⌫
• Door height: Max. 800 mm for flaps
• Material: Plastic track, stainless steel guide bolt
• Finish: Brown track, RAL 8014, galvanized guide bolt
• Installation: Track for press fitting into groove,
guide bolt for plugging into drilling
Infront for light doors and flaps, for 1 door⌫⌫⌫
Cat. No.
Running gear
408.01.009
Set components
For 1 door
Track, length 575 mm
2
Track, length 140 mm
2
Guide bolt
2
Guide bolt, adjustable
2
SW 3 Allen key⌫
1
FF 8.241
8
New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (H
TH F
urni
ture
Fitt
ing
2008
).
⌫
⌫
⌫
Sliding Door Fittings, Roller ShuttersPivot Sliding Door Fittings
⌦⌫ ⌦
⌫ ⌫ ⌫ ⌦
⌫
Packing: 1 Pair
Set
Mounting Infront
Mounting Vorfront
Installation length = min. cabinet depthExtension length = max. door width, push-in depth
Extension length
⌫
Installation length
• Door height: Max. 1,065 mm
• Door width: Max. 610 mm
• Door thickness: 19 – 38 mm
• Material: Steel
• Finish/Colour: Nickel plated, black
• Installation: Runners for screw fixing to cabinet with mounting
brackets , full 19 mm overlay
• Auto-open pushes cabinet doors open the last 32 mm of travel to
ensure doors are fully extended
Infront or Vorfront Pivot sliding door, door weight up to 14 kg ⌫⌫
Installation length
A Extension length
Cat. No.
405 mm 203 mm 290 mm 408.34.341456 mm 254 mm 340 mm 408.34.346506 mm 305 mm 391 mm 408.34.351557 mm 356 mm 442 mm 408.34.356608 mm 406 mm 493 mm 408.34.361659 mm 457 mm 544 mm 408.34.366710 mm 508 mm 594 mm 408.34.371
A B19 mm 9.5 mm22 mm 9.5 mm25 mm 9.5 mm38 mm 9.5 mm
A B C19 mm 12.7 mm 19 mm22 mm 12.7 mm 16 mm25 mm 12.7 mm 13 mm32 mm 12.7 mm 6 mm
FF 8.242
8
New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (H
TH F
urni
ture
Fitt
ing
2008
).
⌫
⌫
⌫
Sliding Door Fittings, Roller ShuttersPivot Sliding Door Fittings
With Ø 35 mm drilling
Ø With shortened intermediate panel
⌫
Fitting to intermediate panel
To adjust the control arm of the concealed hinge, either shorten
intermediate panel or drill hole in intermediate panel
Gap
Door
Wooden strut
Installation with mounting brackets on cabinet top and base
⌦
Mounting bracket
⌦
Concealed hinge
Wooden strut
Cruciform mounting plate
Guide
Dimension B
Installation with mounting brackets to cabinet top and base
⌦
Application and planning dimensions
Wooden strut for connecting top and bottom guides must be supplied
by customer:
Length = internal carcase height - 70 mm
⌫
⌫ ⌫
⌦
• Door height: Max. 700 mm (max. 1,800 mm in combination with
synchro control)
• Door thicknesses: 16 – 20 mm
• Material: Steel
• Finish: Galvanized
• Installation: Guides for screwing onto cabinet top or base or
to intermediate panel with mounting brackets
Infront Pivot sliding door, door weight up to 5.5 kgFor maximum door weight of 5.5 kg (max. 25 kg in combination with synchro control) for 1 or 2 doors
⌫⌫ ⌫
Door
Gap
Door
Gap
Wooden strut
Centre panel
Wooden strut
FF 8.243
8
New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (H
TH F
urni
ture
Fitt
ing
2008
).
⌫
⌫
⌫
Sliding Door Fittings, Roller ShuttersPivot Sliding Door Fittings
Set
Set
Packing: 1 or 100 pcs.
• Material: Plastic
• Installation: Press fitting
Cover cap for 35 mm drilling with shortened intermediate panel
°
Order reference
• Concealed hinges with opening angle of 94°, cruciform mounting
plates and cover caps for covering the cup drillings are not included
in the set. Please order separately.
Packing: 1 pair
Drilling depth in accordance with concealed hinge
⌦⌫
Door offset
Fit cruciform mounting plate to guide. When using DUOMATIC concealed
hinges toolless, fix cruciform mounting plates to wooden strut.
° ⌫
Installation of concealed hinges and cruciform mounting plates
Use concealed hinges with opening angle of 94° and maximum offset of 8 mm for door mounting.
Colour⌫
Cat. No.
White⌫
340.41.702
Brown⌫
340.41.104
Set components
For 1 door
Guide
1 pair
Mounting bracket⌦
4 pcs.
Set of installation instructions
1 pc.
Guide length
Dimension B
Max. possible push-indepth
⌦ Cat. No.
350 mm 186 mm 244 mm 408.07.350
400 mm 236 mm 294 mm 408.07.403
450 mm 286 mm 344 mm 408.07.458
500 mm 336 mm 394 mm 408.07.501
550 mm 386 mm 444 mm 408.07.556
600 mm 436 mm 494 mm 408.07.609
FF 8.244
8
New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (H
TH F
urni
ture
Fitt
ing
2008
).
⌫
⌫
⌫
Sliding Door Fittings, Roller ShuttersPivot Sliding Door Fittings
Infront pivot sliding door synchro control, door weight up to 25 kg⌫ ⌫⌫
• Area of application: Ensures that the door runs parallel when using
the infront pivot sliding door fitting up to 5.5 kg
• Door weight: Max. 25 kg
• Door height: Max. 1,800 mm
• Door thicknesses: 16 – 20 mm
• Material: Toothed rail made of steel and plastic, pinion and guide
for profile rod made of plastic
• Installation: Screw fixing
Toothed rail
Wooden strut
Profile rod
Profile rod guide
Fixing screw
Pinion with srew mount
⌫⌦
Profile rod
Installation of concealed hinges and cruciform mounting plates
Drilling depthin accordance withconcealed hinge
⌦⌫
Gap
Fix cruciform mounting plate to wooden strut.
A distance of at least 122 mm must be maintained when fitting
concealed hinges.
⌫
FF 8.245
8
New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (H
TH F
urni
ture
Fitt
ing
2008
).
⌫
⌫
⌫
Sliding Door Fittings, Roller ShuttersPivot Sliding Door Fittings
Length of guide, with infront pivot sliding door fitting
Cat. No.
350 mm 408.05.356400 mm 408.05.409450 mm 408.05.454500 mm 408.05.507550 mm 408.05.552600 mm 408.05.605
Order reference
The set does not include the profile rod. Please order separately.
Packing: 1 set
Set components
For 1 door
Toothed rail
1 pair
Pinion with screw mount⌫⌦
2 pcs.
M 4 x 25 Fixing screws for screw mount ⌧ ⌫⌦
4 pcs.
Profile rod guide
1 pc.
Set of installation Instructions
1 pc.
Profile rod
• Material: Steel
• Finish: Nickel plated
• Diameter: 8 mm
⌫ ⌫
Length
Cat. No.
2.0 m 226.67.205Packing: 1 pc.
Profile rod length = internal carcase height - 63 mm
Set
FF 8.246
8
New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (H
TH F
urni
ture
Fitt
ing
2008
).
⌫
⌫
⌫
Sliding Door Fittings, Roller ShuttersPivot Sliding Door Fittings
EXL Infront or Vorfront, door weight up to 16 kg ⌫⌫
• Door height: Max. 1,500 mm
• Door thicknesses: 16 – 32 mm for Infront, 19 – 22 mm for Vorfront
• Push-in depth: Max. 230 – 550 mm
• Material: Steel guide and cord, plastic guide roller
• Finish: Black galvanized guide, black plastic sleeved cord
• Installation: Screwing in 32 mm series drilled holes
⌦ ⌫ ⌫ ⌫
Guide
Cruciform mounting plate
Concealed hinge
Cord
Fixing Screws
Door stop
Application
Installation of guide
Installation of guide
Mount guides directly to top
or base of cabinet.
⌫
FF 8.247
8
New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (H
TH F
urni
ture
Fitt
ing
2008
).
⌫
⌫
⌫
Sliding Door Fittings, Roller ShuttersPivot Sliding Door Fittings
Cord tension adjustment
Adjust door height and cord tension by rotating the adjusting screw.
Guide
Push-in depth
⌦Length of guide
Guide length
Max. possible push-indepth
⌦ Cat. No.
340 mm 230 mm 408.25.335
408 mm 294 mm 408.25.340
440 mm 326 mm 408.25.345
504 mm 390 mm 408.25.350
536 mm 422 mm 408.25.355
600 mm 486 mm 408.25.360
664 mm 550 mm 408.25.365
Order reference
Please order door fixing set separately.
Packing: 1 set
Set components
For 1 door
Guide
1 pair
Cord with adjusting screw
2 pcs.
Set of installation instructions
1 pc.
Set
FF 8.248
8
New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (H
TH F
urni
ture
Fitt
ing
2008
).
⌫
⌫
⌫
Sliding Door Fittings, Roller ShuttersPivot Sliding Door Fittings
Door fixing set
• Installation: Screw fixing
• Fitting door to carcase: Without tools (CLIP system)
For inset mounting (Infront), door thicknesses 16 – 19 mm
Drilling dimensions for cup fixing
Supplied with2 Concealed hinges with opening angle of 95°, 8 mm crank4 Fixing screws for concealed hinges, Ø 5 x 15 mm2 Cruciform mounting plates4 Fixing screws for cruciform mounting plates, M4 x 5 mm2 Door stops2 Fixing screws for door stops, Ø 3.5 x 25 mm10 Fixing screws for guide, Ø 4.0 x 12 mm
° Ø ⌧ ⌧ Ø ⌧ Ø ⌧
Door thickness+ 1 mm
For inset mounting (Infront), door thicknesses 19 – 32 mm
Drilling dimensions for cup fixing
Supplied with2 Concealed hinges with opening angle of 95°, 16 mm crank4 Fixing screws for concealed hinges, Ø 3.5 x 15 mm2 Cruciform mounting plates4 Fixing screws for cruciform mounting plates, M4 x 5 mm2 Door stops2 Fixing screws for door stops, Ø 3.5 x 25 mm10 Fixing screws for guide, Ø 4.0 x 12 mm
⌧ ⌧ ⌧ ⌧
Door thickness+ 1 mm
Cat. No.
For 1 door
408.24.020
Packing: 1 set
• Installation: Screw fixing
• Fitting door to carcase: Without tools (CLIP system)
Cat. No.
For 1 door
408.24.002
Packing: 1 set
FF 8.249
8
New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (H
TH F
urni
ture
Fitt
ing
2008
).
⌫
⌫
⌫
Sliding Door Fittings, Roller ShuttersPivot Sliding Door Fittings
Packing: 1 set
• Installation: Screw fixing
• Fitting door to carcase: Without tools (CLIP system)
Door thickness+ 1 mm
⌧ ⌧ ⌧ ⌧
Supplied with2 Concealed hinges with opening angle of 95°, 8 mm crank4 Fixing screws for concealed hinges, Ø 3.5 x 15 mm2 Cruciform mounting plates4 Fixing screws for cruciform mounting plates, M4 x 5 mm2 Door stops2 Fixing screws for door stops, Ø 3.5 x 25 mm10 Fixing screws for guide, Ø 4.0 x 12 mm
Drilling dimensions for cup fixing
For corner mounting (Vorfront), door thicknesses 19 – 22 mm
Cat. No.
For 1 door
408.24.011
FF 8.250
8
New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (H
TH F
urni
ture
Fitt
ing
2008
).
⌫
⌫
⌫
Sliding Door Fittings, Roller ShuttersPivot Sliding Door Fittings
Infront or Vorfront Pivot sliding door, door weight up to 34 kg ⌫⌫
• Door height: 915 – 2,000 mm
• Door width: 255 – 660 mm
• Door thickness: 19 – 32 mm
• Material: Steel
• Finish: nickel plated black
• Installation: vertical with cable system
Hinge carrier strip
*For installation length 303/354/405 mmInstallation length = min. cabinet depthExtension length = max. door width, push-in depth
⌦⌦
Installation length
Dim. A
Dim. B
Extension length⌦
Cat. No.
303 mm _ 257 mm 210 mm 408.24.530
354 mm _ 307 mm 261 mm 408.24.535
405 mm _ 358 mm 312 mm 408.24.541
456 mm 178 mm 409 mm 343 mm 408.24.546
506 mm 203 mm 460 mm 394 mm 408.24.551
557 mm 229 mm 511 mm 445 mm 408.24.556
608 mm 254 mm 561 mm 496 mm 408.24.561
659 mm 279 mm 612 mm 546 mm 408.24.566
710 mm 305 mm 663 mm 597 mm 408.24.571Packing: 1 pair
Order reference
Hinge carrier strip and door mounting set are not included in the set.
Please order separately.
Supplied with
1 pair Slides with cables and mounting material
Set for 1 door
Installation length
Extension length
⌦
Hinge carrier strip set
Cat. No.
For 1 door
408.24.090
Packing: 1 Set
Door height
Used hinge carrier set⌫
915 – 1,422 mm For 1 door
1 set
915 – 1,422 mm For 2 doors
2 sets
1,423 – 2,000 mm For 1 door
2 sets
1,423 – 2,000 mm For 2 doors
3 sets
Order reference for hinge carrier strip set
⌫ ⌫
FF 8.251
8
New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (H
TH F
urni
ture
Fitt
ing
2008
).
⌫
⌫
⌫
Sliding Door Fittings, Roller ShuttersPivot Sliding Door Fittings
Door height
Used hinge⌫
Used mounting set⌫
915 – 1,193 mm 3 pcs.
2 sets
1,194 – 1,498 mm 4 pcs.
2 sets
1,499 – 1,803 mm 5 pcs.
3 sets
1,804 – 2,000 mm 6 pcs.
3 sets
Order reference for door mounting set
Infront door mounting set
Dim. C
Dim. D
Dim. E
Dim. F
Dim. G
19 mm 8 mm 2.3 mm 51 mm 1.4 mm
19 mm 9 mm 1.8 mm 51 mm 0.3 mm
19 mm 15 mm 2.3 mm _ 14.4 mm
21 mm 15 mm 2.3 mm _ 12.8 mm
22 mm 15 mm 2.3 mm _ 11.2 mm
24 mm 15 mm 2.3 mm _ 9.6 mm
25 mm 15 mm 2.3 mm 57 mm 8.0 mm
27 mm 15 mm 2.3 mm _ 6.4 mm
29 mm 15 mm 2.3 mm _ 4.8 mm
30 mm 15 mm 2.3 mm _ 3.2 mm
32 mm 15 mm 2.3 mm 64 mm 1.6 mm
Door thickness
Cat. No.
19 – 20 mm Hole, diameter 35 mm
408.24.092
22 – 32 mm Hole, diameter 40 mm
408.24.094
Supplied with
2 Clip-on hinge
2 Mounting base plate
2 Hinge base spacer
Mounting material
Packing: 1 set
Vorfront door mounting set
Dim. C
Dim. D
Dim. E
Dim. F
19 mm 15 mm 11.5 mm 58 mm
Door thickness
Cat. No.
19 mm Hole, diameter 40 mm
408.24.093
Packing: 1 Set
⌫
Supplied with
2 Clip-on hinge
2 Mounting base plate
2 Hinge base spacer
Mounting material
⌫
FF 8.252
8
New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (H
TH F
urni
ture
Fitt
ing
2008
).
⌫
⌫
⌫
Sliding Door Fittings, Roller ShuttersPivot Sliding Door Fittings
Infront Hawa Fiero 25/35, door weight up to 25 or 35 kg ⌫⌫
• Door height: 700 – 2,250 mm or 2,251 – 2,850 mm
• Door thickness: 19 – 28 mm
• Centre panel thickness: 19 – 21 mm
• Adjusting facility: The installed door can be adjusted vertically,
laterally and in tilt angle
• For laterally sliding-in cabinet doors
• Mounting exclusively on the inside panel.
• The hardware must be easily accessible at all times (detachable in
side or outside panel).
Pantograph scissors
Pantograph bearing, rear end
Upright guidechannel
Roller track.
Door guide
Door guidechannel
Vertical adjustmentscrew
Deflection pulley.
Contactplate
Concealed hinge
Upright guide
Application
Mounting
DimensionA B C D E F
19 – 23 mm 46 mm 12 – 8 mm 3 mm - -
24 mm 47 mm 8 mm 4 mm 11 mm 1 mm
25 mm 48 mm 8 mm 5 mm 11 mm 2 mm
26 mm 49 mm 8 mm 6 mm 11 mm 3 mm
27 mm 50 mm 8 mm 7 mm 11 mm 4 mm
28 mm 51 mm 8 mm 8 mm 11 mm 5 mm
Hawa Fiero 25
⌫
⌫ ⌫⌫
FF 8.253
8
New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (H
TH F
urni
ture
Fitt
ing
2008
).
⌫
⌫
⌫
Sliding Door Fittings, Roller ShuttersPivot Sliding Door Fittings
Internal cabinet height
Max. push-in depth⌦⌫
Max. distance
For 1 door, right,
For 1 door, left
700 – 900 mm 350 mm 445 mm 407.70.010 407.70.110901 – 1,200 mm 470 mm 565 mm 407.70.027 407.70.1251,201 – 1,800 mm 500 mm 595 mm 407.70.036 407.70.1341,801 – 2,250 mm 530 mm 625 mm 407.70.045 407.70.143
• Door height: 700 - 2,250 mm
Order reference
Instead of a groove in the top door edge (from 1,800 mm also in door bottom edge),
a guide track can be surface mounted. Please order separately.
Infront Hawa Fiero 25, door weight up to 25 kg ⌫⌫
Packing: 1 Set
Set
Installation dimension
H = Clear dimension between cabinet floor and top
E = Max. retraction of door
T = Max. permissible distance for hardware installation
from the interior of the closed door to the back edge of the
hardware system.
⌦
⌫ ⌦
⌫
FF 8.254
8
New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (H
TH F
urni
ture
Fitt
ing
2008
).
⌫
⌫
⌫
Sliding Door Fittings, Roller ShuttersPivot Sliding Door Fittings
Internal cabinet height
For 1 door, right,
For 1 door, left
2,251 - 2,850 mm 407.70.054 407.70.152
Infront Hawa Fiero 35, door weight up to 35 kg ⌫⌫
• Door height: 700 – 2,250 mm
• Max. push-in depth: 530 mm
• Max. distance: 625 mm
H = Clear dimension between cabinet floor and top
E = Max. retraction of door
T = Max. permissible distance for hardware installation
from the interior of the closed door to the back edge of the
hardware system.
Order reference
Instead of a groove in the top door edge (from 1,800 mm also in door bottom edge),
a guide track can be surface mounted. Please order separately.
Packing: 1 Set
Installation dimension
⌦⌫
⌦
⌫ ⌦
⌫
Installation sample,
top Hawa Fiero 35 solution and
bottom Hawa Fiero 25
FF 8.255
8
New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (H
TH F
urni
ture
Fitt
ing
2008
).
⌫
⌫
⌫
Sliding Door Fittings, Roller ShuttersPivot Sliding Door Fittings
Colour⌫
Cat. No.
Brown⌫
407.70.205
White⌫
407.70.214
Black⌫
407.70.223
Packing: 1 pc.
• Area of application: Instead of a groove on the upper door edge,
(from 1,800 mm on the bottom door edge, too), a special guide
profile may also be installed on the inside panel.
• Material: Plastic
• Length: 296 mm
• Installation: For scew fixing
Mounting
Order reference
1 profile is required for door heights from 700 to 1,800 mm and 2 are
required for door heights over 1801 mm.
Accessories Infront Hawa Fiero 25/35 Surface mounted guide-profile
⌫
⌫ ⌫
⌫⌫ ⌦ ⌫⌫
FF 8.256
8
New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (H
TH F
urni
ture
Fitt
ing
2008
).
⌫
⌫
⌫
Sliding Door Fittings, Roller ShuttersPivot Sliding Door Fittings
Infront Hawa Turnaway 25/X2 and 35/X3, door weight up to 25 or 35 kg ⌫⌫
• Door height: 650 – 1,800 mm or 1,801 – 2,450 mm
• Door thickness: 22 – 45 mm
• Height adjustment: With hexagon socket-head screw
• Mounting on the exterior of the cabinet
• Covered by a removable interior panel
• For laterally sliding-in cabinet doors
Upright guide profile
Roller track
Upright guide profile
Pantograph bearing, lower
Tension spring
⌦
Door guide channel
Hinges
Upright
Pantograph scissors
Vertical adjustment screw
Vertical adjustment
Adjust door clearance vertically.
Loosen bottom front-end pantograph bearing, adjust door clearance
by means of the vertical adjustment screw and retighten screws.
Application
Vertical adjustment screw
⌫⌫ ⌫
⌦
FF 8.257
8
New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (H
TH F
urni
ture
Fitt
ing
2008
).
⌫
⌫
⌫
Sliding Door Fittings, Roller ShuttersPivot Sliding Door Fittings
Internal cabinet height
Max .push-in depth⌦⌫
Max. distance
For 1 door, right
For 1 door, left
650 – 1,050 mm 450 mm 515 mm 407.72.050 407.72.1501,051 – 1,200 mm 700 mm 765 mm 407.72.067 407.72.1651,201 – 1,500 mm 780 mm 845 mm 407.72.076 407.72.1741,501 – 1,800 mm 820 mm 885 mm 407.72.085 407.72.183
Infront Hawa Turnaway 25/X2
• Door weight: Max. 25 kg
• Door height: 650 – 1,800 mm
Internal cabinet height
Max. push-in depth⌦⌫
Max. distance
For 1 door, right
For 1 door, left
1,801 – 2,450 mm 820 mm 885 mm 407.73.055 407.73.153
Infront Hawa Turnaway 35/X3
• Door weight: Max. 35 kg
• Door height: 1,801 – 2,450 mm
Installation dimension
Packing: 1 set
Set
Packing: 1 set
Set
Order reference
Laterally sliding-in folding doors can be used with this pivot sliding door fitting with maximum door weights of 20 kg (40 kg per pair of doors).
For this purpose please order additionally HAWA FOLDING TURNAWAY 15/20 fitting.
H = Clear dimension between cabinet floor and top
E = Max. retraction of door
T = Max. permissible distance for hardware installation
from the interior of the closed door to the back edge of the
hardware system.
⌦
⌫ ⌦
⌫
FF 8.258
8
New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (H
TH F
urni
ture
Fitt
ing
2008
).
⌫
⌫
⌫
Sliding Door Fittings, Roller ShuttersPivot Sliding Door Fittings
Folding/turning fitting Hawa Folding Turnaway 15/20, door weight up to 15 or 20 kg⌫ ⌫⌫
• Area of application: Supplementary hardware system for bi-folding
furniture doors combined with HAWA-Turnaway 25/X2 and 35/X3.
• Door height: 650 – 1,500 mm
Door weight: Max. 15 kg (pair of door 30 kg)
• Door height: 1,501 – 2,450 mm
Door weight: Max. 20 kg (pair of door 40 kg)
• Door width: Max. 600 mm
• Door thickness: 19 – 22 mm
• Top and bottom guide, top with 1 plastic roller
Mounting
Application
Mounting surface equalizer for side wall
End stopper
Guide
Stop bracket with magnet
Bottom guide channel
Deflection piece
Concealed centre hinge
Surface equalizer for side wall
Interlocking fitting
⌦
Retainer
Door guide
⌫
⌫
FF 8.259
8
New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (H
TH F
urni
ture
Fitt
ing
2008
).
⌫
⌫
⌫
Sliding Door Fittings, Roller ShuttersPivot Sliding Door Fittings
Order reference
Infront Hawa Turnaway 25/X2 and 35/X3 are not included in the set. Please order separately.
Cat. No.
For 1 door, right
407.73.063
For 1 door, left
407.73.161
Packing: 1 Set
Set
The Hawa-Folding Turnaway 15/20 is a supplementary hardware system for folding and
turning away two furniture doors with a panel weight up to 20 kg (44 lbs.).
The second door is guided in a bottom guide channel with a suspending and a guide
element when it is opened and turned away. When the doors are closed, they are guided
in the suspending element. This means that the horizontal door groove clearance is always
the same. A retainer positions the panels at the bottom and holds them flush when closed.
⌫ ⌫⌫ ⌫ ⌦ ⌫⌦⌫
FF 8.260
8
New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (H
TH F
urni
ture
Fitt
ing
2008
).
⌫
⌫
⌫
Sliding Door Fittings, Roller ShuttersRoller Shutters
Guide profile
Prefabricated shutters
• Material: Aluminium and plastic profile, plastic accessories,
steel and aluminium spring loaded shaft
• Weight: With profile height of 18 mm: 8.5 kg/m., with profile height
of 24 mm: 6.0 kg/m.
• Running direction: Vertical or horizontal
• Profile heights: 18 mm or 24 mm
• Profile thickness: Without glide ends 8 mm, with glide ends 10 mm
• Lock strip: Height: 56 mm, thickness: 15.5 mm
• Mounting: For front hung or inset installation
• Version: Roller shutter module ready for installation, for front hung
or inset installation with screwed-on guide tracks and shutter
housing guide
• Installation: Sliding into carcase
• Weight compensation: By spring loaded shaft with adjustable
spring power, included in the delivery
• Motor drive: Recommended from carcase widths min. 600 mm
Front panel
Lock strip
Glide
For carcase dimensions
Profile height
Internal carcase width
Internal carcase height
18 mm 382 – 460 mm 300 – 800 mm461 – 1,500 mm 300 – 1,900 mm
24 mm 382 – 460 mm 300 – 1,000 mm461 – 1,600 mm 300 – 1,900 mm
Minimum installation depth
⌦Max. internal carcase height
Min. installation depth⌦
1,200 mm 300 mm1,600 mm 380 mm1,900 mm 440 mm
Vertical
Left
Left and rigth
Supplied withAccording to ordering information, ready-to-install roller shutter module with: 1 Prefabricated roller shutter made of roller shutter profiles with joint
seals1 Lock strip with glide ends and glide rollers2 Guide profiles1 Front panel1 Counterbalancing mechanism consisting of 1 spring shaft with gears1 Pair of shutter housing guides
DDiirrcceettiioonn ooff cclloossiinngg
⌫ ⌫
⌫ ⌫ ⌦ ⌫ ⌫
⌫ ⌦
VERSION A-MODUL Roller shutters, with guide profile and shutter housing guide
⌫⌫⌫
⌫ ⌫ ⌫
Order referenceWhen ordering, please specify additionally to catalogue number:• Internal carcase width• Internal carcase height• When ordering powder coated finish: RAL colour• Number of roller shutter modules• Lock, handle or inset handle• Running direction, vertical or horizontal
Horizontal
Rigth
FF 8.261
8
New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (H
THFu
rnitu
re F
ittin
g 20
08).
⌫
⌫
⌫
Sliding Door Fittings, Roller ShuttersRoller Shutters
Front hung installation
⌫Note
We recommend a roller shutter motor drive from
carcase widths of 600 mm.
⌫ ⌦
Finish/Colour⌫
Profile height
Profile type
Cat. No.
Silver coloured anodized⌫
18 mm – 442.98.90024 mm – 442.98.91024 mm Groove design
442.98.920
Ground, stainless steelcoloured anodized⌫
18 mm – 442.98.000
24 mm – 442.98.010Powder coated in RALcolours⌫
18 mm – 442.98.60024 mm – 442.98.61024 mm Groove design
442.98.620
Packing: 1 set
Shutter housing guide
Spring loaded shaft
Guide profile
A = Internal carcase width
Inset installation
Finish/Colour⌫
Profile height
Profile type
Cat. No.
Silver coloured anodized⌫
18 mm – 442.99.90024 mm – 442.99.91024 mm Groove design
442.99.920
Ground, stainless steelcoloured anodized⌫
18 mm – 442.99.000
24 mm – 442.99.010Powder coated in RALcolours⌫
18 mm – 442.99.60024 mm – 442.99.61024 mm Groove design
442.99.620
Note
We recommend a roller shutter motor drive from
carcase widths of 600 mm.
⌫ ⌦
Shutter housing guide
Spring loaded shaft
Guide profile
A = Internal carcase width
Packing: 1 set
FF 8.262
8
New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (H
TH F
urni
ture
Fitt
ing
2008
).
⌫
⌫
⌫
Sliding Door Fittings, Roller ShuttersRoller Shutters
Bearing
Prefabricatedshutters
• Material: Aluminium profile, accessories, guide track and bend
made of plastic, stabilisaing shaft made of steel and aluminium
• Colour: Guide track and bend silver coloured or black
• Type of guide: With running track and bend
• Running direction: Vertical or horizontal
• Profile heights: 18 mm, 24 mm or 34 mm
• Profile thickness: Without glide ends: 8 mm, with glide ends
10 mm, with horizontal running direction: 18 mm
• Lock strip: Height: 39 mm, thickness: 18 mm
• Version: Prefabricated
• Installation: Guide track for groove mounting, stabilising shaft for
screw fixing
⌫ °
⌫ ⌫ ⌫ ⌫ ⌫ ⌫
Front panel
Glide
Guide track
For carcase dimensions
Profileheight
Profile type
Internal carcase width
Max. internalcarcase height
18 mm Single-walled⌫
Max. 800 mm (without stabilising shaft) ⌫
2,000 mm
801 – 1,500 mm(with stabilising shaft) ⌫
2,000 mm
24 mm Single-walled⌫
Max. 800 mm (without stabilising shaft) ⌫
2,000 mm
801 – 1,500 mm (with stabilising shaft) ⌫
2,000 mm
24 mm Double-walled
Max. 800 mm
2,000 mm
34 mm Single-walled⌫
Max. 800 mm
2,000 mm
34 mm Double-walled
Max. 800 mm
2,000 mm
Lock strip
Bend
°
Stabilising shaft• From an internal carcase width of 800 mm supplied
(also for smaller versions on request)• Only for single-walled profiles and up to a profile height of 24 mm• Fitted to front or rear
⌫ ⌦ ⌫ ⌫ ⌫ ⌫
Length of prefabricated roller shutterThe length of the prefabricated roller shutter determinesthe weight anddetermines whether a counterbalancing mechanism/motor drive is needed.Length without stabilising shaft: H = Internal carcase height + 50 mmLength with stabilising shaft: H = Internal carcase height +100 mmThe prefabricated roller shutter is extended by the carcase depth:• If the stabilising shaft is fitted in the rear carcase area• If counterbalancing mechanism, Cat. No. 442.09.903 is used
⌫ ⌫ ⌦ ⌫
Weight
Profile height
Profile type
Weight
18 mm Single-walled⌫
8.5 kg/m²
24 mm – 6.0 kg/m²
24 mm Double-walled
8.0 kg/m²
34 mm – 5.5 kg/m²
34 mm Double-walled
7.5 kg/m²
VERSION B Roller shutters, with running track and bend °°
Counterbalancing mechanismThe roller shutter is easy to operate up to a weight of 10 kg. For heavier roller shutters we recommend one of the following options:• Version A-Modul• Version C with spring loaded shaft• Motor drive• Counterbalancing mechanism
⌫⌫ ⌫⌫⌫
FF 8.263
8
New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (H
THFu
rnitu
re F
ittin
g 20
08).
⌫
⌫
⌫
Sliding Door Fittings, Roller ShuttersRoller Shutters
Application and planning dimensions
Installation without stabilising shaft
⌫
Installation with stabilising shaft
⌫
Guide track
Front panel
Internal carcase width
Internal carcase width
Note
Profile height 24 mm double-walled and profile height 34 mm can
only be used for an internal carcase width of up to 800 mm.
⌫⌫
Order referenceWhen ordering, please specify additionally to catalogue number:• Internal carcase width• Internal carcase height• Carcase depth (when using counterbalancing mechanism or
stabilising shaft installed in rear carcase area, respectively)• When ordering powder coated finish: RAL colour• Guide tracks and corner tracks in black or silver coloured• Lock, handle or inset handle• Running direction, vertical or horizontal• Number of roller shutters
⌫ ⌦
⌫ ⌫ ° ⌫ ⌫
Finish/Colour⌫
Profile height
Profile type
Cat. No.
Silver coloured anodized⌫
18 mm Single-walled⌫
442.71.900
24 mm – 442.71.91024 mm Groove design
442.71.950
24 mm Double-walled
442.71.920
34 mm – 442.71.93034 mm Double-walled
442.71.940
Ground, stainless steel coloured anodized⌫
18 mm – 442.71.00024 mm 442.71.01024 mm Double-walled
442.71.020
34 mm – 442.71.03034 mm Double-walled
442.71.040
Powder coated in RAL colours⌫
18 mm – 442.71.60024 mm – 442.71.61024 mm Groove design
442.71.650
24 mm Double-walled
442.71.620
34 mm – 442.71.63034 mm Double-walled
442.71.640
Packing: 1 set
⌫⌫⌫
Supplied withPrefabricated according to ordering information:1 Prefabricated roller shutter made of roller shutter profiles with joint seals1 Lock strip with glide ends1 Set of guide profiles4 Curve tracks1 Front panel1 Counterbalancing mechanism from 1 spring loaded shaft
FF 8.264
8
New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (H
TH F
urni
ture
Fitt
ing
2008
).
⌫
⌫
⌫
Sliding Door Fittings, Roller ShuttersRoller Shutters
VERSION C Roller shutters, with guide profile and spring loaded shaft
⌫⌫⌫
Supplied with
Prefabricated according to ordering information:
1 Prefabricated roller shutter made of roller shutter
profiles with joint seals
1 Lock strip with glide ends
1 Set of guide profiles
1 Front panel
1 Counterbalancing mechanism from 1 spring loaded shaft
Roll diameter of rolled-up roller shutters
For carcase dimensions
Bearing Ø 50 mm
Ø
Lock strip
Prefabricated shutters
Front panel
⌫ ⌫
⌫ ⌫ ⌦
• Material: Aluminium and plastic profile, plastic accessories,
steel and aluminium spring loaded shaft
• Type of guide: With screwed-on guide profiles and weight
compensation by spring loaded shaft
• Running direction: Vertical
• Profile thickness: Without glide ends: 8 mm with glide ends: 10 mm
• Lock strip: Height: 39 mm, thickness: 18 mm
• Mounting: For inset installation
• Version: Prefabricated
• Installation: Guide profiles and spring loaded shaft for screw fixing
• Weight compensation: By spring loaded shaft with adjustable
spring power, included in the delivery
Spring loadedshaft Ø 42/50 mm
Ø
Glide
Profileheight
Profile type
Internal carcase width
Max. internal carcase height
18 mm Single-walled⌫
382 - 460 mm 800 mm461 - 1,500 mm 2,000 mm
24 mm Single-walled⌫
382 - 460 mm 1,000 mm461 - 1,600 mm 2,000 mm
24 mm Double-walled
382 - 460 mm 1,000 mm461 - 1,800 mm 2,000 mm
34 mm Single-walled⌫
382 - 460 mm 1,000 mm461 - 2,000 mm 2,000 mm
34 mm Double-walled
382 - 460 mm 1,000 mm461 - 2,000 mm 2,000 mm
Internal carcase height
18 24 24/Double-walled
34 34/Double-walled
300 mm 85 85 105 – –500 mm 100 100 120 – –750 mm 120 120 120 – –
1,000 mm 120 140 140 135 1351,250 mm 140 140 140 150 1551,500 mm 160 160 160 160 1551,750 mm – 165 160 170 1752,000 mm – 175 175 185 180
Profile height mm/profile type
FF 8.265
8
New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (H
THFu
rnitu
re F
ittin
g 20
08).
⌫
⌫
⌫
Sliding Door Fittings, Roller ShuttersRoller Shutters
Internal carcase width
Installation instructions
The tension of the spring loaded shaft may lift the roller shutter up
slightly in closed position. For this reason we recommend using
version C always in combination with a lock.
Packing: 1 pc.
Order reference
When ordering, please specify additionally to catalogue number:
• Internal carcase width
• Internal carcase height
• When ordering powder coated finish: RAL colour
• Number of roller shutters
• Lock, handle or inset handle
⌫ ⌫ ⌫
Spring loaded shaft
Front panel
Half roll Ø+10 mm
⌦ Ø
Half roll Ø +10 mm
⌦ Ø
Height A dependingon roll Ø 125, 150, 175or 200 mm
⌦ Ø
Guide track
Tracks to be drilled with countersinking on
For Internal carcase width min. 1,000 mm
For internal carcase width max.1,000 mm
Guide tracks with plastic insersion facility
Application and planning dimensions
Finish/Colour⌫
Profile height
Profile type
Cat. No.
Silver coloured anodized⌫
18 mm Single-walled⌫
442.72.900
24 mm – 442.72.91024 mm Groove design
442.72.950
24 mm Double-walled
442.72.920
34 mm – 442.72.93034 mm Double-walled
442.72.940
Ground, stainless steel coloured anodized⌫
18 mm – 442.72.00024 mm 442.72.01024 mm Double-walled
442.72.020
34 mm – 442.72.03034 mm Double-walled
442.72.040
Powder coated in RAL colours⌫
18 mm – 442.72.60024 mm – 442.72.61024 mm Groove design
442.72.650
24 mm Double-walled
442.72.620
34 mm – 442.72.63034 mm Double-walled
442.72.640
⌦⌦⌫⌫
Internal carcase width
FF 8.266
8
New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (H
TH F
urni
ture
Fitt
ing
2008
).
⌫
⌫
⌫
Sliding Door Fittings, Roller ShuttersRoller Shutters
Roller shutters, with guide profile
E
D
F
A
C
G
B
Cat. No.
A Tambour door slats
442.20.920
Cat. No.
B Lock strip
442.26.920
Cat. No.
C Front panel
442.28.970
Cat. No.
D Connecting handle profile
442.27.910
Cat. No.
E Lock strip guide
442.26.990
Packing: 1 pc.
Packing: 1 pc.
Packing: 2.3 m
Packing: 2.5 m
Packing: 1 or 10 pcs.
Application: Outside mounting
Cat. No.
Cotton adhesive tape for glue fixing
442.01.070
• Material: Plastic
• Finish: Silver coloured
• Runnig direction: Vertical or horizontal
• Max. carcase dimensions:
Vertical: Heigth 1,600 mm, width 800 mm
Horizontal: Heigth 1,200 mm, width 1,600 mm
• Mounting: For screw fixing or press into groove
Packing: 10 m
⌫ ⌫
24.07.2009
FF 8.267
8
New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (H
THFu
rnitu
re F
ittin
g 20
08).
⌫
⌫
⌫
Sliding Door Fittings, Roller ShuttersRoller Shutters
Roller shutters, guides for outside mounting
Roller shutters, guides for groove mounting
Cat. No.
F 90° curve guide track °
442.23.900
Packing: 1 pc.
Packing: 1 pc.
Cat. No.
G Guide track
442.29.950
Version
Cat. No.
Left large snail
442.57.921
Right large snail
442.57.922
Cat. No.
Centre stopper
442.56.992
Cat. No.
Track for groove
442.54.901
Cat. No.
90° bend track for groove °
442.55.901
Packing: 1 pc.
Packing: 1 pair
Packing: 2.3 m
Packing: 1 pair
Right snail
Left snail
FF 8.268
8
New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (H
TH F
urni
ture
Fitt
ing
2008
).
⌫
⌫
⌫
Sliding Door Fittings, Roller ShuttersRoller Shutters
For handles
Drilling for
Cat. No.
1 Handle, central⌦
442.70.090
2 Handles, off-centre⌫⌦
442.70.091
Order reference
Order handles separately and fit yourself.
When ordering, please specify additionally to catalogue number:
• Cat. No. handles
• Hole spacing (in combination with cam locks, specify position
of handle and lock)
• With 2 handles: Spacing
⌫ ⌫
⌫
For locks
Drilling and milling for
Cat. No.
1 Cam lock with hook cam, central ⌫ ⌦
442.70.093
Order reference
Order rim locks and cam locks separately.
When ordering, please specify additionally to catalogue number:
• Cat. No. of rim lock or cam lock
• Running direction (vertical or horizontal)
Cylinders also available for locking systems
⌫
Drilling and milling for
Cat. No.
1 Cam lock with hook cam, central, incl. spacer or1 Rim lock, central, incl. spacer ⌫⌦ ⌦
442.70.094
Only for cam locks with hook cam:
⌫Cat. No. 235.88.xxxCat. No. 235.74.xxxCat. No. 235.91.xxx
Only for cam locks with hook cam or rim locks incl. spacer:Cam lock with hook cam; cat. No. 232.07.xxxRim lock incl. spacer; Cat. No. 232.30.xxx
• Only for: Inset handle Cat. No. 158.42.921
Preparation (drilling, milling) of the lock strip⌫ For inset handles
Milling and fitting for
Cat. No.
1 Inset handle, central⌦
442.70.095
2 Inset handles, off-centre⌫⌦
442.70.092
Order reference
When ordering, please specify additionally to catalogue number:
• Hole spacing (in combination with cam locks, specify position
of inset handle and lock)
• With 2 inset handles: Spacing
⌫ ⌫
⌫
⌫ ⌫ ⌧⌧⌧ ⌧⌧⌧
FF 8.269
8
New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (H
THFu
rnitu
re F
ittin
g 20
08).
⌫
⌫
⌫
Sliding Door Fittings, Roller ShuttersRoller Shutters
Packing: 1 pc.
Radio remote control
⌫• For roller shutter motor drive
Packing: 1 pc.
⌫ ⌫
Roller shutter motor drive
Accessories for roller shutters made of aluminium⌫
• Area of application: For roller shutters made of aluminium
• For carcase width: From 600 mm
• Connection: 230 V/50 HZ
• Version: Pre-assembled with shaft, incl. white push button
Cat. No.
Radio remote control⌫
442.70.097
Max. carcase width
Cat. No.
Max. 600 mm 442.70.096
FF 8.270
8
New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (H
THFu
rnitu
re F
ittin
g 20
08).
⌫
⌫
⌫
Sliding Door Fittings, Roller ShuttersRoller Shutters
The length of the elastic ropes is adjusted using the clamping
element with threaded pin and controls the pull force of the
counterbalancing mechanism.
⌦⌫⌦
• For shutter width: Max. 1,000 mm
• For shutter length: Max. 1,800 mm
• Material: Elastic rubber rope, plastic clamping element,steel
threaded pin
• Finish: White clamping element, black threaded pin
• Particularly suitable for narrow, tall cabinets as only small
space is required
⌦ ⌫ ⌫ ⌦ ⌫ ⌫ ⌫ ⌫⌫
For plastic or wooden roller shutters with vertical running direction For roller shutter weight of max. 5 kg
Installation
Clamping element
⌦
Centre shutters
Threaded bolt
⌫
Elastic rope
Elastic rope
Supplied with
2 Elastic ropes Ø 3 mm or 5 mm
2 Clamping elements
2 Threaded pins
1 Set of fixing material
1 Set of installation instructions
Ø ⌦ ⌫
For max. shutter width
For max. shutter length
For max.weight
Elasticrope Ø ø
Cat. No.
600 mm 1,800 mm 3 kg 3 mm 442.08.9001,000 mm 1,800 mm 5 kg 5 mm 442.08.920
Packing: 1 set
FF 8.271
8
New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (H
THFu
rnitu
re F
ittin
g 20
08).
⌫
⌫
⌫
Sliding Door Fittings, Roller ShuttersRoller Shutters
• Mounting position depends on shutter size. Please observe
mounting instructions.
• Cables must be mounted in the centre of the bottom edge.
⌦
⌫⌦
• For shutter width: 216 mm – 1,000 mm
• For shutter length: Max. 1,800 mm
• Material: Steel fitting and cable, plastic rollers with spring
• Finish: Fitting galvanized, side roller black
• Cable length: 1,600 mm
⌫ ⌫ ⌫
Counterbalancing mechanism for roller shutters with vertical running direction For roller shutter weight of max. 6 kg
Installation
Supplied with
1 Pair of rollers with spring
2 Cables with fastening eyes
1 Set of fixing material
1 Set of installation instructions
⌦ Cable length
Cat. No.
1,600 mm 442.09.903Packing: 1 set
FF 8.272
8
New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (H
THFu
rnitu
re F
ittin
g 20
08).
⌫
⌫
⌫
Sliding Door Fittings, Roller ShuttersRoller Shutters
• For shutter width: Max. 1,200 mm
• Material: Aluminium spring loaded shaft, steel spring and screw-on
bearing, plastic cable, lateral end caps, deflection roller,
deflection and cable suspension
• Finish: Galvanized screw-on bearing
⌫ ⌦
⌦ ⌫
⌫ ⌦ ⌫
For roller shutter weight max. 7 kg or max. 10 kg
Installation
Supplied with
1 Spring loaded shaft with internal spring and cable, lateral end caps
and screw-on bearings
1 Deflection roller with screw-on bearing
1 Deflection
2 Cable suspensions (1 for plastic or wooden and 1 for aluminium
roller shutter)
1 Set of installation instructions
⌦ ⌦ ⌫ ⌫
Intermediate shelf centre
() with internalcarcase height1,600 - 2,100 mm
Deflection
Cable
Joints
Cable suspension
⌫
x = position ofdeflection
⌧
• Ready for use installation on intermediate shelf possible
• Screw cable suspension to last profile above the handle.
⌫ ⌫⌫
x = Height (H) _ Depth (T)
⌧ ⌦
For max. internalcarcaseheight
For max. shutter weight
Cat. No.
1,600 mm 7 kg 442.08.9412,100 mm 10 kg 442.08.942
Packing: 1 set
FF 8.273
8
New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (H
THFu
rnitu
re F
ittin
g 20
08).
⌫
⌫
⌫
Sliding Door Fittings, Roller ShuttersRoller Shutters
Packing: 1 set
x = Height (H) _ Depth (T)
⌧ ⌦
• Independent mounting of spring loaded shaft and deflection allow
different roller shutter guiding (e.g. with different height positions)
• No intermediate shelf for installation necessary
• Screw cable suspension to last profile above the handle
⌫ ⌫
⌫⌫
x = position ofdeflection
⌧
Cable suspension
⌫
Cable
⌦ ⌫ ⌫
Supplied with
1 Spring loaded shaft with internal spring and axle
1 Cable
1 Deflection roller with screw-on bearing
1 Deflection
2 Cable suspensions (1 for plastic or wooden and 1 for aluminium
roller shutter)
1 Set of installation instructions
Installation
For roller shutter weight of max. 10 kg
⌫ ⌦ ⌦ ⌫
⌫ ⌫
• Material: Aluminium spring loaded shaft, steel spring and axle,
plastic deflection roller, deflection, screw-on bearing and cable
suspension
• Finish: Galvanized axle
Carcase width mm
Shutter length1,600 mm 2,100 mm
350 – 400 mm 442.08.961 442.08.962400 – 600 mm 442.08.963 442.08.964600 – 800 mm 442.08.965 442.08.966800 – 1,000 mm 442.08.967 442.08.9681,000 – 1,200 mm 442.08.969 442.08.970
Deflection
Joints
FF 8.274
8
New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (H
THFu
rnitu
re F
ittin
g 20
08).
⌫
⌫
⌫
Sliding Door Fittings, Roller ShuttersRoller Shutters
Packing: 1 set
Ordering Notice
The counterbalancing mechanism is pre-manufactured according to
order specifications. When ordering, please specify additionally to
catalogue number:
• Shutter width
• Shutter length
• Shutter material
⌦ ⌦⌦
Supplied with
1 Pull element: Chain and cable
2 Deflection rollers with screw-on bearing
1 Set of fixing material
1 Set of installation instructions
Installation
For roller shutters opening downwards and upwards
⌦
⌦ ⌦ ⌫ ⌦ ⌫
• Area of application: Particularly suitable for roller shutters opening
downwards
• Function: Independent operation of two roller shutters running in
two directions
• For shutter length: Max. 1,800 mm
• Material: Plastic deflection roller, steel screw-on bearing
• Finish: Galvanized screw-on bearing
Shutter length
Cat. No.
Max. 1,800 mm 442.08.990
⌫⌫ ⌫⌫
FF 8.275
8
New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (H
THFu
rnitu
re F
ittin
g 20
08).
⌫
⌫
⌫
Sliding Door Fittings, Roller ShuttersRoller Shutters
Packing: 1 set
⌦⌦ ⌦
Supplied with
2 Deflection rollers with screw-on bearing
2 Cables
2 Mounting brackets
1 Set of fixing material
1 Set of installation instructions
Installation
For synchonized opening of two shutters
⌫
⌦⌫ ⌦
⌦ ⌫ ⌦ ⌫
• For shutter width: Max. 1,200 mm
• For shutter length: Max. 2,300 mm
• Material: Aluminium mounting brackets, steel rope and screw-on
bearing, plastic deflection roller
• Finish: Galvanized screw-on bearing and rope
For shutter width
Cat. No.
Max. 600 mm 442.08.981
Max. 900 mm 442.08.982
Max. 1,200 mm 442.08.983
For roller shutters with vertical or horizontal running direction
Centre roller shutter
⌦