Rohit Industries Group Private Limited, Bahadurgarh, HSS Cutting Tools
HSS SERIES STANDARD - Kinkelder · HSS SERIES. Suggested cutting speed: 80 - 140 m/min. Feed: 0,04...
Transcript of HSS SERIES STANDARD - Kinkelder · HSS SERIES. Suggested cutting speed: 80 - 140 m/min. Feed: 0,04...
STANDARDCutting tubes and solids on manualand (semi-)automatic sawing machines
HSS SERIES
Suggested cutting speed: 80 - 140 m/min.Feed: 0,04 - 0,09 mm/tooth.
For more information:
www.kinkelder.com
Cutting tubes and solids on manual sawing machines
The steam treated Alpha saw blade has a blue Oxide surface layer for a longer blade life compared to the uncoated saw blade. It is mainly being used for cutting steel on manual and semi-automatic sawing machines.
Due to the higher oxidation temperature, this TiN coated Solar saw blade is able to cut applications with high tensile strengths.
APPLICATIONS
APPLICATIONS
PARAMETERS
PARAMETERS
MACHINES
MACHINES
All applications like tubes, profiles and solids. All structural steels and non-alloy tool steel with a tensile strength up to 700 N / mm2
All applications like tubes, profiles and solids with a tensile strength up to 750 N / mm2
Suggested cutting speed: 30 - 60 m/min.
Manual, semi-automatic
Manual, semi-automatic, automatic
160175200225250275300315325350370400425450
1,2 / 1,6 / 2,01,6 / 2,01,2 / 1,6 / 1,8 / 2,01,2 / 1,6 / 2,0 / 2,51,2 / 1,6 / 2,0 / 2,51,2 / 1,6 / 2,0 / 2,5 / 3,01,6 / 2,0 / 2,5 / 3,02,0 / 2,5 / 3,02,0 / 2,5 / 3,02,0 / 2,5 / 3,0 / 3,52,0 / 2,5 / 3,0 / 3,52,5 / 3,0 / 3,5 / 4,0 / 4,52,5 / 3,0 / 3,5 / 4,02,5 / 3,0 / 3,5 / 4,0
32323232 / 4032 / 4032 / 4032 / 38 / 4032 / 4032 / 4032 / 40 / 5040 / 5040 / 5032 / 40 / 5040 / 50
TeethDiameter(mm)
Kerf(mm)
Bore hole(mm)
80 / 100 / 120 / 16064 / 90 / 110 / 140 / 18072 / 100 / 128 / 160 / 20064 / 80 / 90 / 120 / 150 / 180 / 22064 / 80 / 100 / 110 / 128 / 160 / 200 / 24072 / 78 / 84 / 96 / 110 / 120 / 144 / 180 / 220 / 28080 / 90 / 100 / 110 / 120 / 140 / 160 / 200 / 240 / 32072 / 80 / 90 / 100 / 110 / 120 / 140 / 160 / 200 / 250 / 32090 / 100 / 110 / 130 / 150 / 170 / 200 / 250 / 32080 / 90 / 110 / 120 / 140 / 160 / 180 / 220 / 280 / 35070 / 80 / 90 / 100 / 110 / 120 / 140 / 160 / 190 / 220 / 30070 / 80 / 90 / 100 / 128 / 140 / 160 / 180 / 200 / 250 / 32070 / 80 / 100 / 110 / 120 / 130 / 140 / 160 / 180 / 220 / 260 / 35080 / 90 / 100 / 120 / 140 / 180 / 240 / 280
TYPICAL AVAILABE HSS ALPHA SAW BLADES
Due to a sophisticated PVD coating for wear protection which achieves a very low friction coefficient, the Eclipse saw blade is a cost efficient solution for cutting structural and non-alloy tool steel thin walled tubes.
When cutting tubes and profiles on manual and semi-automatic sawing machines, Eclipse allows a higher cutting speed than a steam treated saw blade. It can even be used for cutting thin walled tubes on automatic machines. Eclipse is also very suitable for cutting stainless steel tubes and profiles.
Advantages compared with steam treated• Higher blade life • Higher production output• Increased uptime • Ideal for cutting both structural steel• Lower cost per cut and stainless• Little or no side pick-up
60 - 120 m/min 30 - 50 m/min220 - 260 m/min 60 - 120 m/min
160175200225250275300315325350370400425450
1,2 / 1,6 / 2,01,6 / 2,01,2 / 1,6 / 1,8 / 2,01,2 / 1,6 / 2,0 / 2,51,2 / 1,6 / 2,0 / 2,51,2 / 1,6 / 2,0 / 2,5 / 3,01,6 / 2,0 / 2,5 / 3,02,0 / 2,5 / 3,02,0 / 2,5 / 3,02,0 / 2,5 / 3,0 / 3,52,0 / 2,5 / 3,0 / 3,52,5 / 3,0 / 3,5 / 4,0 / 4,52,5 / 3,0 / 3,5 / 4,02,5 / 3,0 / 3,5 / 4,0
32323232 / 4032 / 4032 / 4032 / 38 / 4032 / 4032 / 4032 / 40 / 5040 / 5040 / 5032 / 40 / 5040 / 50
TeethDiameter(mm)
Kerf(mm)
Bore hole(mm)
80 / 100 / 120 / 16064 / 90 / 110 / 140 / 18072 / 100 / 128 / 160 / 20064 / 80 / 90 / 120 / 150 / 180 / 22064 / 80 / 100 / 110 / 128 / 160 / 200 / 24072 / 78 / 84 / 96 / 110 / 120 / 144 / 180 / 220 / 28080 / 90 / 100 / 110 / 120 / 140 / 160 / 200 / 240 / 32072 / 80 / 90 / 100 / 110 / 120 / 140 / 160 / 200 / 250 / 32090 / 100 / 110 / 130 / 150 / 170 / 200 / 250 / 32080 / 90 / 110 / 120 / 140 / 160 / 180 / 220 / 280 / 35070 / 80 / 90 / 100 / 110 / 120 / 140 / 160 / 190 / 220 / 30070 / 80 / 90 / 100 / 128 / 140 / 160 / 180 / 200 / 250 / 32070 / 80 / 100 / 110 / 120 / 130 / 140 / 160 / 180 / 220 / 260 / 35080 / 90 / 100 / 120 / 140 / 180 / 240 / 280
TYPICAL AVAILABE HSS SOLAR & ECLIPSE SAW BLADES
The allround HSS solution
APPLICATIONS
PARAMETERS
MACHINES
All structural steel , non-alloy tool steel and stainless steel thin walled tubes. Tensile strength up to 600 N /mm2
Manual, automatic, flying cut-off applications
SteelAustenitic stainless steel (300 series)Ferritic without Ti (409 & 412) Ferritic with Ti (441)
Suggested cutting speed
Kinkelder BVCorporate Headquarters
Nijverheidsstraat 2(Industrial Area Zuidspoor)NL-6905 DL ZevenaarP.O. Box 242NL-6900 AE ZevenaarThe Netherlands
T: +31 (0)316 58 22 00F: +31 (0)316 58 22 [email protected]
Kinkelder USA SouthPell City (AL), USAT: +1 (205) 884 49 [email protected]
Kinkelder FranceMessein, FranceT: +33 (383) [email protected]
Kinkelder Cutting Technology Co., Ltd.Suzhou City, ChinaT: +86 (0)512 693 68 [email protected]
Kinkelder CuttingSolutions Inc.Louisville (KY), USAT: +1 (502) 329 [email protected]
AMV Service Le Chambon Feugerolles FranceT: +33 (477) [email protected]
KTS Sägetechnik GmbHZülpich, GermanyT: +49 [email protected]
Saws InternationalUSA HeadquartersMachesney Park (IL), USAT: +1 (815) 965 [email protected]
Kinkelder Belgium N.V./S.A.Sint-Pieters-Leeuw, BelgiumT: +32 (0)2 465 64 [email protected]
KR SawsCoventry, United KingdomT: +44 (0)24 7661 [email protected]
Kinkelder France SAOrchies, FranceT: +33 (320) 71 02 [email protected]
Kinkelder Saw Inc. Canton (MI), USAT: +1 (734) 453 [email protected]
Sepio spol s.r.o.Zborovice, Czech RepublicT: +420 (0)57 366 91 [email protected]
or scan
D WNLOAD OURFREE APP NOW
Made in Holland www.kinkelder.com V 18.01 - HSS Standard Series