How to setup CCcam/Newcs/Oscam with ClearOS 5.2...
Transcript of How to setup CCcam/Newcs/Oscam with ClearOS 5.2...
(#1)
Eurocardsharing Forum > Other Options > Tutorials > Cardsharing Tutorials
How to setup CCcam/Newcs/Oscam with ClearOS 5.2 Linux
Page 1 of 83 1 2 3 11 51 > Last »
View First Unread Thread Tools Search this Thread Rating: Display Modes
kapzas
Super Moderator
Offline
Posts: 4,148
Level: 48 [ ]Life: 355 / 1183
Magic: 1382 / 12874
Experience: 35%
Thanks: 1,271Thanked 2,149 Times in 874Posts
Join Date: Mar 2007
04-April-2008, 23:45
This tutorial helps you to setup a Linux PC CCcam server under 1 hour, even for users with noLinux knowledge.
We need some old working PC. Hardware: Pentium 3 or Amd 600Mhz and up, 256mb (512mboptimal) ram, from 5gb HDD and up, Networkcard, and a simple 1mb, 4mb, 8mb... or onboardvideocard (no need a fancy 128mb AGP/PCI-E videocard).
Intro:Out there are many Linux distro's. With most of them you can build a good share server, but weuse today "ClearOs".
What is ClearOs you ask!? ClearOs is a powerful network and gateway server designed for smallorganizations and distributed environments. Though ClearOs comes with an extensive list offeatures and integrated services (see sidebar), the solution is easy to configure thanks to theintuitive web-based interface. ClearOs Homepage
Is it stable!? Yes it is very stable and works almost perfectly with CCcam.
OK lets start now.
1: Download and burn it to a CD. Link for ClearOs iso:ClearOS Enterprise 5.2 Service Pack 1
2: Installation steps:1) Choose a Language: Installation language2) Keyboard Type: Your keyboard language3) Installation Method: Local CDrom4) Install Type: Install5) To Proceed with the installation type "ClearOs"6) System Mode: Standalone Mode7) Specify Lan IP Address: Manual Configuration (Set dynamic ip configuration if your routersupport MAC based static lease)8) Nameserver IP: your router gateway IP (example 192.168.1.254 or what u have there)9) Set The System Root Password10) Partitioing: Use default11) Select Software Modules: Now with new ClearOs you can choose install "Graphical Console"(GUI), or without it. "Intrusion Detection And Prevention" is pretty cool thing against thehackers and prevents smaller DDOS attacks. Everything else you can tropp. You can installmissing modules easy later under dashboard directly if needed.
3: Now if ClearOs is installed and you used manual IP table then you can unplug monitor andkeyboard from PC you do not need them anymore.If you used automatic DHCP, then log to server from current monitor and keyboard to knowwhat IP your server has.Use command: ifconfigNow you see your server IP, unplug monitor and keyboard from PC.
How to setup CCcam/Newcs/Oscam with ClearOS 5.2 Linux http://www.eurocardsharing.com/f163/how-to-setup-cccam-newcs-osc...
1 di 13 17/12/2010 23.58
4: System setup.1) Write to your webbrouser next https://192.168.1.142:81 of cource your server lan IP.2) Next u get warning message like so "This Connection is Untrusted"Hit the tab "I Understand the Risks", then the tab "Add Exception" and at least "ConfirmSecurity Exception" (It can happen that u need make 2-3 times that over again, when u get tothe login page!)3) LoginUsername: rootPassword: What u entered during the ClearOS installation4) Language: default is English5) Network: Please set mode to "Standalone Mode No Firewall" later if everything is working ucan enable Firewall if u want it.6) Time Zone: set your country7) Domain: you can leave it to default "clearos.lan" or change. It is up to you.8) Organization: fill the forms like u want, not needed to use your real data there.9) Congratulations, you have completed the system setup wizard! and hit the tab "Continueconfiguring your system"10) Finish: and again u need make that step "This Connection is Untrusted" Hit the tab "IUnderstand the Risks". Then the tab "Add Exception" then "Confirm Security Exception" and atlast "Resend". (It can happen that with FireFox brouser u need make 3-5 times that over again,when u get to the main page back!)
5: Set up the Dashboard.1) Hit on tab "ClearCenter" and "Register System". (If you had already ClarkConnect registered,then same data u can use forward with ClearOS as well. But if you are new user then hit thatlink and register your self: Register ClearOS2) Hit on tab "ClearCenter" and "Software Modules" From there tick "FTP server module" and hit"Go". Wait, when it finish install. Depends from system speed from 2-3 minutes it can take, butyou get constant info as well to when it is finish.3) Close the dashboard window complete and open it again, then u see new Tab up there called"Server" and under that is now FTP. Next open that FTP and set "Status - Running" as "On boot- Automatic". "Maximum Instances" set down from 30 to 14) Open tab "Directory" and "Users" Now u have message there "The required user databaseengine is not running. Continue" Please hit that "Continue" tab now.5) LDAP is used to store user and password information. Just hit there "Update" tab.6) Open again "Directory" and "Users". Now hit the tab "Add" and fill the next form:
Code:
Username: blabla (your FTP and Home directory username)
First Name: fafa
Last Name: gaga
Password: xxxxx (your FTP access password)
Verify: xxxxx
Hit the tab "Add" to save new user data.
6: Download CCcam pack and FTP client software. Unpack CCcam pack and take out from thereCCcam.x86 and CCcam.cfg.WinSCP Free SFTP, FTP and SCP client for Windows
7: Open FTP client app add there lines like so:Session: serverHost named: 192.168.1.15User name: blabla that you have created under dashboardPassword: xxxxxNow OK and connect to server.
8: Copy with FTP client CCcam.x86 and CCcam.cfg to share server. If it is done close the FTPsession.
9: Now we need open Putty. If you do not have putty you can download it here: Download puttyfor windows PCLog with putty to server as root not as user blabla!Now we can put some commands to get CCcam to right place.
10: Commands: (command "ls" is directory viewer) Please give commands exactly like i writehere then it works 100%!!!
cd /varmkdir /var/binmkdir /var/etcls
Note: mkdir is command for create new directory. If you see now 2 new directory then that partis OK. Next commands are:
cd /home/blablals
Note: that blabla is user what you created under dashboard and you see there CCcam.x86 and
How to setup CCcam/Newcs/Oscam with ClearOS 5.2 Linux http://www.eurocardsharing.com/f163/how-to-setup-cccam-newcs-osc...
2 di 13 17/12/2010 23.58
CCcam.cfg.
cp CCcam.x86 /var/bincp CCcam.cfg /var/etc
Note: cp is command for copy. Command rm is for delete.
cd /var/binlschmod 755 CCcam.x86ls
Note: Now you see that CCcam.x86 is green, before it wase withe.
CCcam auto startup script:
nano /etc/rc.d/rc.local
Note: there you see line like that: "touch" and so one. under that line is lot empty space. Nowplease write next line exact under that "touch" line there so:
/var/bin/CCcam.x86
Note: / you can get there only with shift+7 and ctrl+o is save file and ctrl+x exit. Look out thatyou do not change there nothing else!
cd /var/binls./CCcam.x86
Note: ./CCcam.x86 is command to start CCcam manually from command line and command:killall CCcam.x86 stops it agan. For CCcam debuge mode use command: ./CCcam.x86 -d
cd /var/etclsnano CCcam.cfg
Note: with that command you have access to cfg file to edit it or you can use tutorial 15: to setto whole server FTP access . I prefer to change cfg file over putty.
12: How to get CCcam 2.1.0, 2.1.1 and 2.1.2 working with ClearOs 5.2 CCcam 2.1.3, 2.1.4 as2.2.x don´t work with ClearOs 5.2!Please give next commands into your system command line:
mkdir testcd testwget http://web.zone.ee/kapzas/libstdc++.so.6.0.9cp libstdc++.so.6.0.9 /usr/libcd /usr/libchmod 755 libstdc++.so.6.0.9unlink libstdc++.so.6ln -s libstdc++.so.6.0.9 libstdc++.so.6/sbin/ldconfigcd ..cd ..rm -rf test
13: Done. CCcam server is up and running. With ClearOs working most external cardreadersserial and usb with no extra linux configuration.
For serial reader in COM1 put into CCcam.cfg so:
PHOENIX READER PATH : /dev/ttyS0
If you have attached to COM2 then so:
PHOENIX READER PATH : /dev/ttyS1
COM3: ttyS2 and so one.
For attached USB1 reader like Smargo Smartreader+ so:
SERIAL READER : /dev/ttyUSB0 smartreader+
Attached USB2:
SERIAL READER : /dev/ttyUSB1 smartreader+
For USB3: ttyUSB2 and so one.
14: How to setup Infinity reader under ClearOs 2 way options:http://www.eurocardsharing.com/f163/...-connect-96082 or http://www.eurocardsharing.com/f163/...-windows-59966 Note: "apt-get" does not work with ClearOs 5.1 anymore u need touse command "yum"
Big thanks for that Infinity reader howtos goes to Bennieboy and to Ramad
How to setup CCcam/Newcs/Oscam with ClearOS 5.2 Linux http://www.eurocardsharing.com/f163/how-to-setup-cccam-newcs-osc...
3 di 13 17/12/2010 23.58
15: As lot asked how to install NewCs into ClearOs so here is tutorial how do too that. Pleasefollow exaclty my next instruction!
cd /libln -sf libcrypto.so.0.9.8e libcrypto.so.0.9.8
Download NewCs pack NewCS 1.67 RC1 and do so:Unpack Newcs pack and take out from there 2 files: newcs.i686 andnewcs.xml.phoenix Next rename newcs.i686 to a newcs.x86 and newcs.xml.phoenix to anewcs.xmlCopy newcs.x86 to /var/bin and set chmod 755Copy newcs.xml to /etcNext edit newcs.xml for you needs and start newcs.x86 same way as you started CCcam:/var/bin ./newcs.x86And for last we put newcs.x86 to server auto startup script.If use newcs and CCcam together then palce so that newcs.x86 script is next over CCcam.x86startup script then boots newcs.x86 first up and then CCcam.x86 like it should.newcs auto startup script:
nano /etc/rc.d/rc.local
Note: there you see line like that: "touch" and so one. under that line is lot empty space. Nowplease write next line exact under that "touch" line there so:
/var/bin/newcs.x86
16: Here is tutorial how to install No-Ip under ClearOs:You need first install cc-devel developers package to be abel to execute no-ip install commands:
yum groupinstall "Development Tools"cd /home/blablamkdir no-ipcd no-ipwget http://www.no-ip.com/client/linux/noip-duc-linux.tar.gztar zvxf noip-duc-linux.tar.gzcd noip-2.1.9-1makemake install
Note: that blabla is user what you created under dashboard!
Put your no-ip account login/email string
Put password to that login/email
Enter update interval: [30] write to there 30 Then no-ip makes updates to your IP every 30minute
Do you wish to run something at successful update? [N] (y/n) hit n
cd .. and agan cd ..rm -rf no-ip and hit entertipe command exit to leave.Done. You have successfuly installed no-ip under linux.Here u can look same commands too: The Newbie's Guide to the No-IP™ Linux Client
17: Here is tutorial how to install DynDns under ClearOs Big thanks for that link goes toBennieboy
18: Totorial how to set FTP access under ClearOs to by root and not only as user.To enable the user that you have created to to have ftp access to the hole server you must dothis steps:
1) edit file proftpd.conf: nano /etc/proftpd.conf2) comment this line #DefaultRoot ~you should have something like this:
# To cause every FTP user to be "jailed" (chrooted) into their home# directory, uncomment this line.# DefaultRoot ~
Big thanks for that FTP tutorial goes to nmga
19: If you have CCcam stabilty problem with your PC server and you have tryed everything,then here comes a help for that issue. Change from your CCcam.cfg next line:
#DVB API: -1to aDVB API: -1
Note: You need restart the CCcam after change. It works only with linux PC based CCcamservers. Dreambox or other reciver users do not try that!
Big thanks for that tip goes to Shalafi
How to setup CCcam/Newcs/Oscam with ClearOS 5.2 Linux http://www.eurocardsharing.com/f163/how-to-setup-cccam-newcs-osc...
4 di 13 17/12/2010 23.58
20: Tutorial how to create CCcam running check script and if CCcam stops then that script runsCCcam self up again.
1) Log over putty to server as root and give next commands to create the script:
cd /etctouch CCcamcheck.shchmod 777 CCcamcheck.shnano CCcamcheck.sh
Next copy all that inside the CCcamcheck.sh:
Code:
#!/bin/bash
if ! ps -C CCcam.x86 > /dev/null
then
/var/bin/CCcam.x86
fi
Next hit from your keyboard ctrl+o to save and ctrl+x to exit.
2) Now we need make a cron job what executes the script every 5, or from you set minutes.Please give next commands to make a cron job:
cd /etcexport EDITOR="nano"crontab -e
There add new line to the job list so:
Code:
*/5 * * * * /etc/CCcamcheck.sh
Note: / sign you can get there only with shift+7 !
Hit ctrl+o to save and ctrl+x to exit and test the script out if it is working. Kill CCcam from/var/bin and wait 5 minutes and CCcam should go self up agan.Note: If you feel that 5 minutes is too long, then u can lower it.
3 minute cron:
Code:
*/3 * * * * /etc/CCcamcheck.sh
1 minute cron:
Code:
*/1 * * * * /etc/CCcamcheck.sh
I know that "CCcam running check script" is not the best one, but it works well and it is easy touse. If u want use more complicate script then they you find in forum.
Big thanks for that CCcam running check script goes to FSS
21: Tutorial how to Configure CCcamphpinfo in ClearOs Big thanks goes to gangster429
22: How to get working a cheap ID cardreader Omnikey or SCM with ClearOs 5.1.yum install opensc pcsc-lite ccidchkconfig pcscd onservice pcscd start
Next you need "pcsc" version of newcs. Exmple u have PC linux server, then you neednewcs.i686.pcsc newcs-1_67RC1.zip Newcs conf examples and chat you find from here: How toget a Omnikey or SCM reader working with NewCs/Oscam under Linux and Windows
23: Manual way to compile self Oscam for ClearOs with support of webinterface, smargosmartreader (USB), serial (COM) reader, mouse (USB) reader and omnikey/SCM (PCSC) reader.
1) ClearOs update for compile task needed new packages:
yum updateyum groupinstall "Development Tools"yum install openssl-develyum install pcsc-lite-devel
How to setup CCcam/Newcs/Oscam with ClearOS 5.2 Linux http://www.eurocardsharing.com/f163/how-to-setup-cccam-newcs-osc...
5 di 13 17/12/2010 23.58
mkdir cmakecd cmakewget http://www.cmake.org/files/v2.6/cmake-2.6.4.tar.gztar xvzf cmake-2.6.4.tar.gzmkdir cmake-buildcd cmake-build../cmake-2.6.4/bootstrapgmakesudo gmake installcd ..rm -rf cmake
2) Compiling the oscam. After rename and copy to the new path:
cd /usr/srcsvn co http://streamboard.gmc.to/svn/oscam/trunk oscamcd /usr/src/oscamcmake -DWEBIF=1 -DPCSC=1makemv oscam oscam.x86cp oscam.x86 /var/bincd ..rm -rf oscam
3) New attributes for launch:
cd /var/binchmod 755 oscam.x86
4) Oscam auto startup:
nano /etc/rc.d/rc.local
Note: there you see line like that: "touch" and so one. under that line is lot empty space. Nowplease write next line exact under that "touch" line there so:
/var/bin/oscam.x86
If u have already added CCcam and newcs too, then it looks like so:
/var/bin/oscam.x86sleep 10/var/bin/newcs.x86sleep 10/var/bin/CCcam.x86
5) Oscam config flies copy to correct path and new attributes set:
cd /usr/local/etc/wget http://web.zone.ee/kapzas/oscam.confwget http://web.zone.ee/kapzas/oscam.serverwget http://web.zone.ee/kapzas/oscam.userwget http://web.zone.ee/kapzas/oscam.serviceschmod 755 oscam.confchmod 755 oscam.serverchmod 755 oscam.userchmod 755 oscam.services
At last edit oscam config files for your needs. If u want update your oscam for latest svn justrun setp 2) and 3) over again.
Good testing
Kapzas
Last edited by kapzas; 05-December-2010 at 14:30. Reason: Update
The Following 393 Users SayThank You to kapzas For ThisUseful Post:Remove Your Thanks
2F4U (17-September-2008), a31r (08-September-2010), abtorrent (10-January-2010),abuhabib (14-December-2008), ac_simps (18-August-2009), adamjohn (04-December-2008),adil7777 (02-January-2009), Adonis70 (13-February-2009), adytzu2007 (27-July-2010),AgentSixtynine (06-August-2008), alacan (29-March-2010), AlamSAsif (04-May-2008),alamski (26-July-2009), alberto53 (08-March-2009), alemprator123 (03-August-2008),alheeti (23-November-2008), Ali0820 (08-November-2009), amical (27-March-2010),andy_dm (26-November-2010), araignee (02-March-2010), arash_totti88 (06-March-2009),argo (04-September-2009), artman (28-September-2008), astratto72 (12-April-2008),astronman (17-September-2008), atispeed (23-September-2009), azax_2 (10-May-2008),a_annouar (09-May-2010), b j m (28-September-2010), ba5_ba5 (13-January-2010),babla (15-August-2008), Bacteria (27-April-2008), badremammar (08-October-2008),bajo11 (02-October-2008), bambacha (11-December-2008), banush (01-August-2009),BarbaNegra (02-October-2008), Barney2222 (02-April-2010), bartyam (20-September-2008),baukland (04-May-2009), belmondo2001 (18-December-2008), ben4cardsharing (14-April-2009),
How to setup CCcam/Newcs/Oscam with ClearOS 5.2 Linux http://www.eurocardsharing.com/f163/how-to-setup-cccam-newcs-osc...
6 di 13 17/12/2010 23.58
Bentbo (06-March-2010), bernli (26-November-2008), Bert72 (21-January-2009),BiBiCh (16-September-2009), Biocide (15-May-2008), blader3 (08-July-2008), blowup (02-January-2009), boeha (08-June-2008), brijdec (03-July-2008), buchead (16-August-2009),budo1770 (01-November-2009), burcak (02-September-2008), burim2010 (16-May-2010),butyiba (27-May-2009), caesar (21-June-2008), calhau (04-June-2009), camdboy (26-February-2010),cankurt (09-March-2009), capepanwa (19-June-2009), CARD2009 (14-March-2010),carthago (11-February-2009), cemel (10-May-2010), chai (25-July-2008), chakik (03-September-2009),Charly20 (08-April-2008), cherrymoon69 (19-January-2009), chiccon (21-October-2010),Chiller07 (12-October-2010), chip (16-April-2009), christof1500 (17-March-2009), clansat (07-August-2008), clouca (17-October-2009), clouzotbe (22-June-2009), cold007 (01-October-2008),cornelshs (25-March-2009), croke (15-December-2010), CS_njofra (13-December-2008),cypriot_01 (17-February-2009), da100 (12-November-2008), dachacho (25-January-2010),dalibor79 (17-February-2010), Danny73 (01-April-2009), Dante12 (30-November-2010),danyguit2000 (21-October-2010), Danzel (30-October-2010), Darkvil (05-April-2008),DBOXLOVER (25-January-2010), del111 (16-March-2010), Denilson15 (12-July-2008),deskag (17-August-2009), diablodark (10-February-2010), digital music (09-June-2009),Discoveryawaits (18-November-2009), disera (08-March-2009), djhmk (21-December-2008),dmxjo (11-February-2010), drew23 (10-December-2008), Duall (03-June-2010), eadas (15-July-2008),entouch (14-July-2008), farmer (16-December-2008), fatamorgana (05-July-2009),FDD2006 (27-December-2008), fiacco (11-March-2010), finek1 (12-May-2009), firga (03-June-2008),flyfar4 (17-November-2008), force1030s (03-April-2010), fredis1993 (20-June-2009), FSS (16-April-2008), furioustn (21-September-2009), furyo (14-December-2009), futureneo (23-August-2008),gangster429 (04-September-2008), ganzeegeezer (19-June-2010), gartner (19-April-2010),GaryCyprus (03-February-2009), Geniusx (15-October-2010), genugeo85 (28-September-2010),gggabcsi (21-October-2009), ghosts (01-August-2008), gianluca68 (26-June-2009), gindi (17-October-2009), gnppld (11-August-2009), goldrake02 (04-November-2008), govno (03-June-2010),greg-cccam (23-April-2008), gul156 (04-October-2008), HackTN (16-July-2009), hampi (12-March-2009), hani84 (14-March-2009), heaven (01-August-2010), hecsa (24-August-2008),Hendrik200 (19-November-2010), hotboy183 (12-June-2009), HoUnD (08-February-2010),hpkch (06-November-2009), humax7 (01-August-2009), hxxxlxxxh (21-July-2008), ida3a (23-May-2009), imstillalive (09-February-2009), innuendo_to (01-December-2010), interman (22-September-2008), jardano (21-January-2009), jarjartv (25-August-2008), jawa (27-September-2008),jaxi (02-September-2009), jeanburgart (03-May-2009), jetson (10-January-2009), jgliser (27-October-2008), jimelb (01-September-2009), jims45 (16-November-2009), jinxt (18-July-2010),joedenob (05-May-2008), jor (21-May-2008), jorgis (07-May-2008), jozefp (31-March-2010),jpdc1991 (30-November-2010), justme (23-April-2008), jyapgr (31-October-2008),kalimero1 (26-December-2009), KaLLe2k (11-January-2009), kaputa (07-April-2008),kdarte (06-November-2008), ker256 (20-October-2009), khalilg (02-October-2010),kierindongo (21-May-2008), kikkokman2006 (13-June-2009), kingkonglk (03-June-2010),Knik (29-October-2010), koko30sat (23-July-2009), KOP (26-September-2008),kosmopoliten (20-November-2008), KPW2 (25-February-2010), ktzelepi (22-January-2009),kUbbAS (11-August-2008), kukuia (15-January-2010), kuralsiz (07-October-2009), lankyadz (20-April-2008), leds (31-May-2009), leofezollari (20-November-2009), leonpadi (22-May-2008),lfc4ever (23-February-2010), Librarian (05-April-2008), lizard_ago (04-April-2008),ljondov (11-October-2008), lotusse38 (22-May-2008), lubrano (30-September-2009), lucdarox (29-July-2009), luisito (24-October-2009), lukskw (22-January-2010), lz4ql (22-March-2009),Macgyver (05-March-2010), maestro007 (10-July-2010), mahon68 (14-August-2010), makay (10-June-2009), malakas (08-December-2010), mali107 (31-December-2008), mannn (14-September-2009),manos19730 (12-March-2010), marcelo (10-May-2010), marciolg (14-May-2008),marcodm800 (08-November-2009), markbeek (20-February-2010), Markoni (04-December-2008),Marre (16-February-2009), MasterENG (05-June-2009), matics (28-June-2009), matoc (06-March-2010),mazzard (23-August-2008), mbnet (08-August-2008), mehdisa (23-January-2009),member91040 (04-February-2009), mganddrea (28-April-2010), mgerome (21-November-2009),micro77 (05-February-2009), mishe (14-October-2009), mistergr (07-December-2009), MiTkO (11-July-2008), mitrovica1 (03-November-2009), Mixman (27-May-2008), mizoucom (30-June-2009),mlove (02-February-2009), Mo7amed (08-September-2008), mohican4me (10-February-2010),moita3 (24-May-2010), moljac (31-March-2009), monster76 (01-November-2010),Moonglider (13-October-2008), Morality (18-October-2010), mormon (22-February-2009),Morte (14-April-2008), morten9836 (02-January-2009), mosaca (19-December-2009),mrbondo2 (06-October-2008), mvarsani (01-May-2010), naevol (05-August-2009), nazzoo (23-October-2008), neohack (23-October-2008), neps1966 (10-July-2008), netagra (04-May-2009),netman (15-May-2009), netsubi (20-June-2009), nicoskid (09-April-2008), NIKITPATEL (02-May-2010),nikoe (10-March-2009), nizzze (21-November-2010), nmfsantos (03-September-2008),novazolo (03-February-2010), noxios (20-May-2009), oasisontherun (24-March-2009), omur_ (29-June-2009), orac68 (10-August-2008), oscar9 (10-June-2009), oscarf (02-December-2008),osdgap (05-August-2008), outlander (04-October-2009), oven (29-May-2009),pacman362 (08-November-2008), palT (18-April-2008), PANKOT1979 (24-November-2008),pantgr (14-April-2009), panther_j (29-September-2008), paulo renato pedroso (28-October-2009),pawel_cs (17-February-2009), pegasusflash (01-July-2010), peho (19-February-2009),pengpockys (06-January-2009), peoples (28-July-2009), phill0 (17-June-2008), piddiw (19-December-2008), pinotje (19-March-2010), plonker (09-April-2008), ppet (28-July-2009),pragmatrans (05-January-2010), primabo (22-February-2009), progpeter (30-December-2008),P_M_R_S (03-September-2009), qukyalba (11-June-2009), r0ot$harp (24-January-2010),ra7oo (16-March-2009), rahulan (19-July-2010), rajan2323 (03-June-2008), Ramad (21-July-2008),ran2009 (Yesterday), ratbu (06-October-2010), rayman_et (05-June-2009), redron007 (16-July-2010),RemyZero (10-April-2009), rf600r (15-March-2010), robife (14-November-2009), roddie (12-August-2010), ruelps (14-December-2010), ruiamorim (21-May-2008), r_Weelie (20-December-2008),sabai (29-November-2008), saledjordjevic (22-December-2009), Salgado12 (07-July-2009),samrock (28-November-2010), samsung2009 (21-February-2009), sanagol (06-October-2008),sandji (20-July-2009), sarahofdream (27-January-2010), SaraMarazmas (30-October-2009),satanic (15-June-2010), sateraser (18-April-2008), satxare (30-October-2009), savin stelian (17-May-2009), scanner5555 (05-March-2010), seek share (01-October-2009), seheryeli21 (27-September-2010), SerAlex (06-July-2010), serigraphist (11-April-2009), Seroglu (15-October-2008),sevax (26-November-2010), seyfo (05-December-2010), SGSG (11-May-2009),Shaitantheevil (16-June-2009), shalafi (05-December-2008), shareuk (05-February-2009),shawn (21-November-2008), shonr (09-June-2008), silla (13-September-2009), Smoothas (23-October-2010), Smurfer (05-April-2008), Soul4000 (25-January-2009), spaw2new (11-April-2009),Spc_xsat (20-March-2010), spiff (23-November-2008), sportcafe (06-August-2008),springer (19-October-2008), staoddo (16-October-2009), STAR 14 (07-August-2008),stefanos_gr (26-April-2008), steveharlow (25-September-2010), stig887 (30-August-2008),svenni (18-February-2009), swiebo (13-October-2008), syskg (16-September-2010),szymek (Yesterday), tanabut (05-November-2009), tanveerpower (26-January-2009),tbenmila (10-May-2010), tdwno058 (06-November-2010), tellstar (10-March-2010),Telnet (20-December-2008), Temel (19-January-2009), teo1966 (06-August-2009),thamon (02-September-2008), therat (20-May-2008), tictac25 (03-September-2008),tigana18 (25-July-2008), tjoda (07-July-2008), toli1980 (22-January-2009), tolvaly (04-April-2010),Toobig (06-September-2008), total_confusion (09-June-2008), tra1 (10-May-2010),twity (02-September-2009), u22u (06-March-2009), UDA_65 (05-August-2009),unkletom (01-September-2010), usinst (12-March-2010), valters23 (16-December-2008),Ventura900 (18-October-2008), villan (28-September-2008), vitg (18-June-2008), vladoa (17-February-2010), vladobggr (17-September-2009), vwgti (05-April-2008), wacko911 (11-July-2010),
How to setup CCcam/Newcs/Oscam with ClearOS 5.2 Linux http://www.eurocardsharing.com/f163/how-to-setup-cccam-newcs-osc...
7 di 13 17/12/2010 23.58
(#2)
(#3)
waiwit (02-October-2009), wassss (18-November-2009), webashik (07-April-2008),whoslooking (26-June-2009), wiltzer (15-June-2008), wishmaster23 (17-February-2010),xon (25-March-2009), yakup (25-August-2008), yalaci (30-December-2008), Yuyito (25-October-2008),Zasso (02-October-2008), zeusino (28-September-2010), zjabarin (24-November-2008),zmobariz (16-September-2009), zurika (13-December-2009)
Sponsored Links
07-April-2008, 21:07
giol76
This message has been deleted by Librarian. Reason: deleted user
kaputa
Banned
Offline
Posts: 19
Level: 3 [ ]Life: 0 / 52
Magic: 6 / 519
Experience: 9%
Thanks: 125Thanked 12 Times in 9 Posts
Join Date: Jul 2007
07-April-2008, 21:19
Hello kapzasThank u for ur great work here.I Hope this is big help for start a pc server.bye for nowkaputa
The Following User SaysThank You to kaputa For ThisUseful Post:
pantgr (14-April-2009)
kapzas
Super Moderator
Offline
Posts: 4,148
Level: 48 [ ]Life: 355 / 1183
Magic: 1382 / 12874
Experience: 35%
07-April-2008, 22:42
To giol76you can try out. If chipset are similar with install PC and what is on that laptop then it may workso.
How to setup CCcam/Newcs/Oscam with ClearOS 5.2 Linux http://www.eurocardsharing.com/f163/how-to-setup-cccam-newcs-osc...
8 di 13 17/12/2010 23.58
(#4)
(#5)
Thanks: 1,271Thanked 2,149 Times in 874Posts
Join Date: Mar 2007
The Following User SaysThank You to kapzas For ThisUseful Post:
tbsn59 (Yesterday)
kaputa
Banned
Offline
Posts: 19
Level: 3 [ ]Life: 0 / 52
Magic: 6 / 519
Experience: 9%
Thanks: 125Thanked 12 Times in 9 Posts
Join Date: Jul 2007
08-April-2008, 20:43
Hellomy server ClarkConnect server is working now but still have some problem.1) when i swich of the server and when i start again server not start automaticaly.2) today my server offline even its runing . its sending peep soundwhat can be the reason???thank u kapzasbyekaputa
The Following 2 Users SayThank You to kaputa For ThisUseful Post:
pantgr (14-April-2009), raphaelo (22-March-2009)
kapzas
Super Moderator
Offline
Posts: 4,148
Level: 48 [ ]Life: 355 / 1183
Magic: 1382 / 12874
Experience: 35%
Thanks: 1,271Thanked 2,149 Times in 874Posts
Join Date: Mar 2007
08-April-2008, 21:24
kaputa then your PC motherboard reques attached keybord on boot then it works agan.
How to setup CCcam/Newcs/Oscam with ClearOS 5.2 Linux http://www.eurocardsharing.com/f163/how-to-setup-cccam-newcs-osc...
9 di 13 17/12/2010 23.58
(#6)
(#7)
Apples Champion!CC_share
Super Moderator
Offline
Posts: 1,503
Level: 33 [ ]Life: 80 / 801
Magic: 501 / 9719
Experience: 6%
Thanks: 115Thanked 2,477 Times in 465Posts
Join Date: Oct 2006
Location: No GPS fix found,(are you inside a building?)
08-April-2008, 21:53
Quote:
Originally Posted by kapzas
kaputa then your PC motherboard reques attached keybord on boot then it works agan.
On some mainboards you can avoid it by going into the bios and changing the line:HALT ON ALL ERRORS to HALT ON NO ERROR
This can usually be found in the first screen of the bios setup
-------------------------------------------------------DM7000 Running Nabilosat Darkstar IILinux CardServer running Debian 5.0.2
I Hate people who steal my stuff-------------------------------------------------------
All you´re cards are belong to us
If you're happy with our board, Please consider making a donation HERE
Looking for Peers again. HERE
It's not a shame if you use the Thanks button
The Following 3 Users SayThank You to CC_share ForThis Useful Post:
gianluca68 (21-June-2009), KOP (23-May-2008), mxantho (31-January-2009)
Thank you
kaputa
Banned
Offline
Posts: 19
Level: 3 [ ]Life: 0 / 52
Magic: 6 / 519
Experience: 9%
Thanks: 125Thanked 12 Times in 9 Posts
Join Date: Jul 2007
Thank you - 09-April-2008, 20:23
Quote:
Originally Posted by CC_share
On some mainboards you can avoid it by going into the bios and changing the line:HALT ON ALL ERRORS to HALT ON NO ERROR
This can usually be found in the first screen of the bios setup
Thank u for answeri will trybyekaputa
The Following User SaysThank You to kaputa For ThisUseful Post:
pantgr (14-April-2009)
How to setup CCcam/Newcs/Oscam with ClearOS 5.2 Linux http://www.eurocardsharing.com/f163/how-to-setup-cccam-newcs-osc...
10 di 13 17/12/2010 23.58
(#8)
(#9)
(#10)
palTMember
Offline
Posts: 44
Level: 5 [ ]Life: 0 / 110
Magic: 14 / 1252
Experience: 43%
Thanks: 11Thanked 13 Times in 10 Posts
Join Date: Feb 2007
09-April-2008, 20:32
Nice tutorial! How does ClarkConnect compares with Ubuntu as CCcam server? Is it more stabile,faster or smth? I've tried Ubuntu 7.10 dmesg is filled with strange error messages after i startCCcam 2.08. Like:[96922.856835] ofo requeuing : rcv_next 7B6643F5 seq 7B6643F5 - 7B6643FD
yes server running again
kaputa
Banned
Offline
Posts: 19
Level: 3 [ ]Life: 0 / 52
Magic: 6 / 519
Experience: 9%
Thanks: 125Thanked 12 Times in 9 Posts
Join Date: Jul 2007
yes server running again - 09-April-2008, 20:34
Quote:
Originally Posted by kapzas
kaputa then your PC motherboard reques attached keybord on boot then it works agan.
Hi kapzasthank u for ur quick reply.server is runing now but last nite also same things hapend peep sound
again. then i check the worning mesg.:-
CPU machine check exception: 0000000000000004Bank 2 : F60020000000017a at 000000008aab000Kernel Panic-not syncing : CPU Context corrupt
Press Alt-F2 to Alt-F6 for Additional shell terminals
what can be the reason? i hope u have some idea about this msg.thank ubyekaputa
The Following User SaysThank You to kaputa For ThisUseful Post:
pantgr (14-April-2009)
kapzas
Super Moderator
09-April-2008, 20:48
kaputa
How to setup CCcam/Newcs/Oscam with ClearOS 5.2 Linux http://www.eurocardsharing.com/f163/how-to-setup-cccam-newcs-osc...
11 di 13 17/12/2010 23.58
Edit Tags
Offline
Posts: 4,148
Level: 48 [ ]Life: 355 / 1183
Magic: 1382 / 12874
Experience: 35%
Thanks: 1,271Thanked 2,149 Times in 874Posts
Join Date: Mar 2007
I tip that you have memory module (ram) failure. Please test with MemTest your memory.Link for download: http://www.memtest.org/#downiso
The Following 2 Users SayThank You to kapzas For ThisUseful Post:
gravity80 (07-May-2009), Sharingtv (18-April-2008)
Page 1 of 83 1 2 3 11 51 > Last »
Tags
None
Quick Reply
Message:
Options
Quote message in reply?
« Previous Thread | Next Thread »
Currently Active Users Viewing This Thread: 1 (1 members and 0 guests)
ran2009
Posting Rules
You may post new threadsYou may post repliesYou may not post attachmentsYou may edit your posts
BB code is OnSmilies are On[IMG] code is OnHTML code is OffTrackbacks are OffPingbacks are OffRefbacks are Off
Forum Jump
How to setup CCcam/Newcs/Oscam with ClearOS 5.2 Linux http://www.eurocardsharing.com/f163/how-to-setup-cccam-newcs-osc...
12 di 13 17/12/2010 23.58
Powered by vBulletin® Version 4.0.6Copyright ©2002 - 2010, Jelsoft Enterprises Ltd.
RSS Feed - Sitemap - Contact Us - Eurocardsharing - Archive - Top
How to setup CCcam/Newcs/Oscam with ClearOS 5.2 Linux http://www.eurocardsharing.com/f163/how-to-setup-cccam-newcs-osc...
13 di 13 17/12/2010 23.58