How to detect Thunderbolt device on ThunderboltM3 · 2020. 5. 29. · Discrete Thunderbolt(TM)...
Transcript of How to detect Thunderbolt device on ThunderboltM3 · 2020. 5. 29. · Discrete Thunderbolt(TM)...
How to detect
Thunderbolt device
on ThunderboltM3
Step0: Please refer manual on page2 and page3 for
installing ThunderboltM3 card.
Step0: Please refer manual on page2 and page3 for
installing ThunderboltM3 card.
• Settings \ Advanced\Windows OS configuration\Windows10
WHQL Support: UEFI
– Fourth level » Fifth level
Step1: Please setting “Windows10 WHQL Support” to
UEFI in BIOS setup.
• Settings \ Advanced \ Intel® Thunderbolt / Discrete
Thunderbolt(TM) Support : Enabled
Step2: Please setting “Discrete Thunderbolt(TM)
Support ” to Enabled in BIOS setup.
• Settings \ Advanced \ Intel® Thunderbolt \ Discrete
Thunderbolt(TM) Configuration \ GPIO3 Force Pwr: Enabled
Step3: Please setting “GPIO3 Force Pwr” to Enabled in
BIOS setup.
• Or please press “Save Changes and Reboot” and then press “OK
button”. Setting \ Save & Exit
Step4: Press F10 button for saving change and exit.
• Settings \ Advanced \ Intel® Thunderbolt /
Discrete Thunderbolt(TM) configuration \
Windows 10 Thunderbolt support: Enabled
Step5: Into BIOS setup again.
Step6: Please setting “Windows 10 Thunderbolt
Support” to Enabled.
Step7: Please wait 20 seconds.
Step8: Press F10 button for saving change and exit.
Please refer setp3.
Step9: Install Windows 10 OS again and then must be
connect Thunderbolt device on ThunderboltM3 card.
Step10: Please install driver for this unknown device-
“Base System device” in device manager.
• It is driver for ThunderboltM3 on MSI website.
• https://www.msi.com/PC-component/support/ThunderboltM3
Step11: It will be showed “Thunderbolt(TM) control” in
device manager after installing driver.
Step12: Please install “Thunderbolt Control Center” or “
Thunderbolt Software” on Microsoft store.
Step13: Please setting “Always Connect” in “Thunderbolt
Control Center” and then also click “OK” button.
Step14-1: Thunderbolt Software
Step14-2: Please setting “Always Connect” in
“Thunderbolt Software” and then device will be showed.
• It is manual for ThunderboltM3 on MSI website.
• https://tw.msi.com/PC-component/support/ThunderboltM3#down-manual
• It is driver for ThunderboltM3 on MSI website.
• https://www.msi.com/PC-component/support/ThunderboltM3
• It is compatibility device for ThunderboltM3 on MSI website,
please click “compatibility” button first.
• https://www.msi.com/PC-
component/support/ThunderboltM3#support-test
Reference:
Intel® Extreme
Masters Certified PC