Hold-Up & Panic Devices
Transcript of Hold-Up & Panic Devices
Hold-Up & Panic Devices
264 Money Clip•
•
••
•
Designed for installation in cash registers,cash boxes and at tellers' windowsWhen activated, sends and immediatesignal to either the police or central officeSingle pole double-throw contactsRecessed screws provided for easymountingDimensions:158mm L x 57mm W x 19mm D
266 Foot Rail•
•
•
••
Reliable easy to operate foot activatedhold-up deviceHousing made from rugged castaluminiumDesigned to minimize the possibility offalse alarms while permitting unobtrusiveoperationIndicator flag locks when alarm is trippedDimensions:460mm L x 90mm W x 120mm H
269R Hold-Up Switch•
•
•
•
••
•
Double-pole double-throw contacts formulti-notificationsSwitch design provides totally silentoperationTwin 45° screw terminals with EOL resistersplicing terminalAdhesive pads for temporary positioningprior to screw mountingOperating temp: 14°F to 140°FListed for UL636 Hold-Up alarm units andsystemsDimensions:89mm L x 51mm W x 32mm D
270R Hardwired Hold-Up Switch In PlasticCase••
••
•
•
Switch Type: Plunger type DPDTSwitch action: Selectable latching ormomentarySwitch rating: 0.2A @ 30VDC max.Connections: four position 45° screwterminal block for each output side withEOL resister splicing terminalsListed for UL636 Hold-Up alarm units andsystemDimensions:89mm L x 51mm W x 38mm D
268 Hold-Up Switch••
•
No chance of accidental trippingSmooth operation without danger of beingdetectedSupplied with SPDT contacts for open orclosed circuit systems
Hold-Up Switches