HMT Final Auction Catalog - vihn.netpmi.vihn.net/auction/Files/4_42130_5-21-14 May 21 Auction...
Transcript of HMT Final Auction Catalog - vihn.netpmi.vihn.net/auction/Files/4_42130_5-21-14 May 21 Auction...
HMT Final Auction Catalog
LOT QTY DESCRIPTION
1 1 PIPE THREADER, RIDGID MDL. 535, 1/8"–2" pipe cap., 1/4"–2" bolt cap., 8" carriage trvl., 3-jaw self-
centering chuck, sw.-away 5-flute cone, 1/2 HP, for./rev. switch, foot switch, roll stand, univ. die head,
S/N 36149
2 1 PIPE THREADER, RIDGID MDL. 535, 1/8"–2" pipe cap., 1/4"–2" bolt cap., 8" carriage trvl., 3-jaw self-
centering chuck, sw.-away 5-flute cone, 1/2 HP, for./rev. switch, foot switch, roll stand, univ. die head,
S/N EC01977.
2A 1 HYDRAULIC H-FRAME PRESS, VANGUARD 50 T. CAP., Mdl. HP50, wrk. tbl. lift dev., S/N 07120481-
1A.
3 1 SHOP PRESS, 12 T. CAP.
4 1 PEDESTAL GRINDER, 12" x 2" whls, adj. tbls. (2), 4-3/4 x 3-3/4 ea.
5 1 PEDESTAL GRINDER, BALDOR, 3/4 HP
6 1 DOUBLE END GRINDER, DAYTON, 1/3 HP, 60 Hz., 115 v., S/N 4Z123
7 1 PEDESTAL GRINDER, BALDOR, 1/3 HP
8 1 PEDESTAL GRINDER, SPEEDWAY, 3/4 HP
9 1 DISC SANDER, STATE 20", 27" x 10-1/2" table, 2 HP adj. table ht., tlt tbl. S/N N.A.
10 1 WELDING TABLE, CUSTOM, w/caster wheels
11 1 PEDESTAL VISE, REED MDL. 205R, H.D.
12 1 PALLET JACK, MIGHTY LIFT 2,500 KG CAP.
13 1 SIDE WINDER PIPE BENDER, ENERPAC 2"
13A 1 ELECTRIC GENERATOR, TITAN INDUSTRIAL
14 1 HYDRAULIC JACK HAMMER, FAIRMONT, Briggs & Stratton motor
15 1 ELECTROMAGNETIC DRILL PRESS, MILWAUKEE, S/N 050023398
16 1 ELECTROMAGNETIC DRILL PRESS, HOUGEN, S/N 10912
17 1 CHOP SAW, MILWAUKEE 14", H.D., S/N 96890904
18 1 PARTS CLEANER, RED
19 1 DRAWER SYSTEM, 14-drawers, w/contents
20 1 DRAWER SYSTEM, 13-drawers, w/contents
21 1 TOOL CABINET, CRAFTSMAN
22 1 CABINET, 15-drawer
23 1 CABINET, 15-drawer
24 1 FILE CABINET, 5-drawer, H.D.
25 1 PRESSURE WASHER/STEAM CLEANER, KARCHER MDL. HDS755
26 LOT SHELVES, w/shop equipment
27 LOT SHELVES, w/shop equipment
28 LOT SHELVES, w/shop equipment
29 LOT SHELVES, w/shop equipment
30 1 METAL CUTTING RADIAL ARM SAW, DEWALT, 20" max. whl size, 48" x 22" tbl, 10 HP, tlt/swvl HD,
air vise
31 1 PLATE MAGNET, O.S. WALKER
32 1 PLATE MAGNET, O.S. WALKER
May 21, 2014 Auction Catalog
Page 1
HMT Final Auction CatalogLOT QTY DESCRIPTION
33 1 SHOP CABINET, 12-drawer
34 1 FLOOR SCRUBBER, TENNANT
35 1 ELECTRIC OVEN, DESPATCH MDL. RS-1, 500 deg. max. temp., (3) adj. shelves, 24" x 48" x 36" depth
int. dim., 220v/3p, 7 KW, contents not inc., S/N 71062.
36 1 FURNACE, CUSTOM
51 1 MAN. DUPLICATOR PUNCH PRESS, W.A. WHITNEY 50 T. CAP., Mdl. 652-50,1.25" dia. in 1/2" steel,
1.75" dia. in 3/8" steel, 3.375" dia. in 1/4" steel, 5" dia. in 3/16" steel, 30" throat, 1/2" punch stroke,
1/4"–2" stroke adj., 20 HP, S/N 652-185-35009.
52 1 ROBOT WELDER, FANUC ARC MATE 120 MDL. A05B-1208-B201, 6-axis, mod. const. elect. servo-
driven robot designed for precision high-spd. welding and cutting, axis 1–330 deg./135 deg./sec., axis
2–265 deg./120 deg./sec., axis 3–450 deg./135 deg./sec., axis 4–380 deg./240 deg./sec., axis 5–280
deg./240 deg./sec., axis 6–540 deg./400 deg./sec., 26.4 lbs. wrist load cap., 44 lbs. axis 3-load cap., 88
lbs. axis 2-load cap., Fanuc R-J2 cab., electric servo drives, mtd. on Preston Easton RTT-20 robotic
transporter, S/N R95776595.
53 1 PRECISION HIGH CURRENT DENSITY PLASMA CUTTING SYSTEM, KALIBURN PROLINE 2150,
combines precise, square & virtually dross-free cuts w/excellent speeds on gauge thick metals to 1"
(25.0mm) thk., max. cap. To 1-1/2" (38.0mm)
54 1 HIGH FREQUENCY IND. WELDER, LEPEL MDL. T-5-3-KC-SW, S/N 7106-A.
55 1 MASS SPECTROMETER LEAK DETECTOR, VARIAN MDL. 936-70SP, S/N 67E-002.
56 1 OVEN, BLUE M MDL. OV-12A
57 LOT PLASMA TIPS, HYPERTHERM (Three Boxes)
57A 1 POWER & IDLER TURING ROLL, VANGUARD 5 METRIC TON, Mdl. R5-BA
58 1 CNC VERTICAL MACHINING CENTER, MAZAK MDL. V-15, Vickers 2100 Acramatic CNC ctrl., 55.1" x
26.7" tbl., 40" Y-trvl., 20" X-trvl., 30" Z-trvl., 8"–38" spndl. nose to tbl., 21.6" spndl. center to column,
33.5" floor to tbl. top, 3,300 lb. tbl. load, 15 HP, spds.: 14–2,000 RPM, No. 50 MT spndl. nose, 20 tool
storage cap., max. tool dia. 5" full/17.7" empty, remote pendant, transformer, coolant, S/N M-10294.
59 1 RADIAL DRILL, CARLTON 4'-9", dbl. end base, 3 HP, pwr. elev., man. clamp, box tbl., coolant pump,
10" extra column height, tilting clamp fixture, S/N OA 956.
60 1 RANDOM CASE SEALER, 3M-MATIC MDL. 77R-KS, (2) 3" top and bot. tape hds., auto. adj. for height
and width, top and bot. belt drives, 6" x 6" x 4.75" high min. box size, 5 lb. min. box wt., unlimited length x
20.5" x 20" high max. box size, 85 lb. max. box wt., (12) boxes per min. spd., 115v, single-phase, S/N
5394.
61 1 HIGH SPEED PRODUCTION PRESS, OAK 100 T. CAP., 63" x 22-1/2" bed area, 47-1/2" x 30" slide
area, 48" L-R btwn. posts, 24" F-B btwn. posts, 6" post dia., 1-5/8" stroke, 16-9/16" S.D.U.A. shut height,
13-9/16" S.D.A.D. shut height, 13-1/2"–18-1/2" crown lift, 80–500 SPM spds., 40 HP, air clutch, Trabon
lube, S/N 956.
62 1 HIGH SPEED PRODUCTION PRESS, OAK 100 T. CAP., 63" x 22-1/2" bed area, 47-1/2" x 30" slide
area, 48" L-R btwn. posts, 24" F-B btwn. posts, 6" post dia., 1-5/8" stroke, 16-9/16" S.D.U.A. shut height,
13-9/16" S.D.A.D. shut height, 13-1/2"–18-1/2" crown lift, 80–500 SPM spds., 40 HP, air clutch, Trabon
lube, S/N 954.
Page 2
HMT Final Auction CatalogLOT QTY DESCRIPTION
63 1 RADIAL DRILL, CINCINNATI GILBERT 4'-11", drills to center of 96" cir., 11" column dia., (12) spndl.
spds.: 33–1,200 RPM, No. 4 MT spndl., 19-1/2"–56-1/2" spndl. radius, 13-1/4"–52-3/4" spndl. to base,
36" x 60" base, 8" base height, 12" spndl. trvl., 5 HP, bolt-on rt. ang. base, 27" x 27" x 23" box tbl., pwr.
elev., man. clamp, S/N 6115.
63A 1 WELDING MANIPULATOR, PANDJIRIS 8' X 8', 8' vert. trvl., 8' horiz. trvl., 360 deg. column rot., 1/3 HP,
pendant ctrl., rapids, 144" height x 96"W, S/N 400-8357/800-8249-4.
64 1 HORIZONTAL MILL, SHELDON NO. 0, S/N 3-5702
65 1 AUTOMATIC HORIZONTAL BANDSAW, DOALL MDL. C-916A, 9" round cap., 9" x 16" rect., 1" x .035"
x 159" blade, 105–275 FPM blade spd., hyd. inf. vari. feed cntrl., 14-1/2" whl. dia., 2 HP, adj. guide arms,
coolant, piece counter, pwr. roller vise, auto. index to 24", S/N 502-95385.
66 1 POWER HACKSAW, RACINE
67 1 HORIZONTAL BANDSAW, DOALL MDL. C-4, S/N 234-66641
68 1 CNC BLADE TIP GRINDER, BUTLER NEWALL MDL. BTG4042 HI-SPD, retrofit 2007 w/Fanuc 16I-
MB, servos, wiring, PC based ctrl. w/G.E. Fanuc open arch and G.E. Fanuc pendant style pulse gen.,
38" sw., 36" max. grndng. dia., 60" max. grndng. length, 60" tbl. stroke, 30" x 2" x 12" grnd. whl., 6,500
SFM whl. spd., 15 HP grnd. whl. mtr., 50 HP work mtr., laser ctrl. feed rate, wet type dust collection sys.,
Donaldson Torit Mdl. DF02-8 10 HP dry type dust collector, S/N 86BTG4042.
69 1 PLAIN HORIZONTAL MILL, KEARNEY & TRECKER NO. 430TF17, 94" x 17" tbl., 42" long feed, 14"
cross, 18" vert., (24) main spndl. spds.: 15–1,500 RPM, (8) ram spndl. spds.: 100–1,600 RPM, No. 50
taper, 30 HP main, 5 HP ram, twin elev. screws, ram type mtrzd. overarm, rear ctrls., coolant pump,
motorized overarm, S/N 4-7451.
70 1 PLAIN HORIZONTAL MILL, KEARNEY & TRECKER NO. 425TF, 88" x 17" tbl., 42" long feed, 14"
cross, 18" vert., 24 spndl. spds., 13–1,300 RPM, No. 50 taper, 25 HP, twin elev. screws, double
overarm, rear ctrls., coolant pump, S/N 7-8233.
71 LOT SUNDSTRAND H.D. BELT SANDERS & BALDOR PEDESTAL GRINDER w/dust collector
72 1 VERTICAL MILL, CINCINNATI MILACRON VERCIPOWER 20" X 86-1/2" BED TYPE, Mdl. 450-20,
20" x 86-1/2" tbl., 42" long trvl., 18" cross, 24" vert., (24) spndl. spds.: 14–1,400 RPM, No. 50 taper, (32)
long and cross feeds, (32) vert., 3/16 to 45 IPM, 2"–26" spndl. to tbl., 50 HP, rapids, S/N 331045V75-
0002.
73 1 JIG MILL, DEVLIEG 3", Mdl. 3B-48, 3" spndl., No. 40 taper, 36" spndl. vert. trvl., 16" horiz., (16) spndl.
spds.: 25–1,200 RPM, (16) fds.: 0.002–0.020 IPR, (16) milling fds.: 0.5–36 IPM, 50–150 IPM rapids, 30"
x 48" tbl., 48" tbl. long trvl., 16" tbl. retract, S/N 14-221.
74 1 JIG MILL, DEVLIEG 2-1/2", Mdl. 2B-36, 2-1/2" spndl., No. 40 taper, 24" spndl. vert. trvl., 12" horiz., (16)
spndl. spds.: 42–2,000 RPM, (16) fds.: 0.0016–0.018 IPR, (16) milling fds.: 0.4–32 IPM, 50–150 IPM
rapids, 24" x 36" tbl., 36" tbl. long trvl., 12" tbl. retract, S/N 9199.
75 1 VERTICAL BANDSAW, DOALL MDL. TF-2021M, new 2000, cap. @ 0 deg.: 20" x 21" rect., 20" rd.,
cap. @ 45 deg.: 20" x 14" rect., 14" rd., 21" max. work height cap., 20" throat, 1-1/4" x 192" x 0.042"
blade, 40–300 FPM vari., 20" dia. blade whls., 36" x 38" tbl., 45 deg. column tilt L-R, 6,000 lbs. tbl. cap.,
20 gal. HPU, 15 GPM pump, 10 HP, vari.-spd., hyd. blade tension, hyd. head tilt, 10-1/2" hyd. vise,
coolant system, chip pan, S/N 447-00290
Page 3
HMT Final Auction CatalogLOT QTY DESCRIPTION
76 1 VERTICAL BANDSAW, DOALL MDL. TF-2021M, new 1999, cap. @ 0 deg.: 20" x 21" rect., 20" rd.,
cap. @ 45 deg.: 20" x 14" rect., 14" rd., 21" max. work height cap., 20" throat, 1-1/4" x 192" x 0.042"
blade, 40–300 FPM vari., 20" dia. blade whls., 36" x 38" tbl., 45 deg. column tilt L-R, 6,000 lbs. tbl. cap.,
20 gal. HPU, 15 GPM pump, 10 HP, vari.-spd., hyd. blade tension, hyd. head tilt, 10-1/2" hyd. vise,
coolant system, chip pan, S/N 447-99283
77 LOT METAL TUBE OF BANDSAW BLADES
78 1 JIG MILL, DEVLIEG 3", Mdl. 3K-72, 3" spndl., No. 40 taper, 60" spndl. vert. trvl., 16" horiz., (16) spndl.
spds.: 17–1,660 RPM, (16) fds.: 0.0013–0.167 IPR, 45" x 72" tbl., 72" tbl. long trvl., 16" tbl. retract,
rapids, pwr. drawbar, S/N 9367.
79 LOT ANGLE PLATES, DEVLIEG
79A 1 AIR LIFT ROTARY TABLE, DEVLIEG 26" X 26", 6 T-slots, 3/4" width on 4" centerlines, 6-3/4" base to
top, 360 deg. In 1 deg. Incr., S/N 937471
80 1 RADIAL DRILL, CINCINNATI GILBERT 4'-11", spds.: 42–1,500 RPM, No. 5 MT, 26" x 26" plain box
tbl., pwr. elev., man. clamp, S/N 6159.
81 1 RAM TYPE TURRET LATHE, WARNER & SWASEY NO. 5 MDL. M-1740, 20" sw. over bed, 10-1/4"
over slide, 13" max. turn length, 2-7/8" spdl. hole, (12) spdl. spds: 26-1316 RPM, A-1-8" spdl. nose, 10"
slide crs travel, 24-1/4" slide long. trvl, 7.5 HP, 12" dia. 3-jaw chuck, 4-way toolpost, coolant, preselector
HD, misc. tooling, S/N 724250
82 LOT NO. 5 WARNER & SWASEY TOOLING & ACCESSORIES
83 1 AUTOMATED LONGITUDINAL SEAM WELDER, AIRLINE (JETLINE) MDL. LW10313, 72" max.
welding length, 0.020"–0.250" thickness, 6"–42" dia., Jetline Series 9500 system controller, Jetline auto.
arc length ctrl., Jetline digital cold wire feeder, pwr. supply not included, S/N 1082.
84 1 HYDRAULIC SURFACE GRINDER, GALLMEYER & LIVINGSTON 8" X 24", Mdl. 350, capacities: 8"
width/15" height/ 4" length, 29-1/2" long 8" x 24" tbl. surf. pwr. incr. downfeed, pwr. whl. head elev.,
coolant system, push button ctrl. station, whl. dresser, auto. lube, splash guards, no chuck, S/N 350427.
85 1 FURNACE, K.H. HUPPERT TYPE ST STYLE 20CHT, 2,000 deg. max. oper. temp., 14"W x 12"H x
45"D chamber, 440v/3p, 35 KW, S/N 26.
86 1 FURNACE, K.H. HUPPERT TYPE ST STYLE 19CHT, 2,000 deg. max. oper. Temp., 14"W x 12"H x
45"D chamber, 440v/3p, 35 KW, S/N 29.
87 LOT POWER & IDLER ROLLS
88 1 RADIAL DRILL, CINCINNATI BICKFORD 6'-19" TRACK TYPE, spds.: 8–1,000 RPM, (18) spndl. fds.:
0.004–0.125 IPR, 8, 11-1/2, 14, 18, 20 and 27 TPI tap leads, No. MT, 67" x 104" trvlng. base, 20 HP,
pwr. elev., pwr. clamp, pwr. head trvl., pwr. traverse to base, S/N 6E949.
89 1 SURFACE GRINDER, VANGUARD 10" X 20", Mdl. GM-Y250, new 2007, 9.84" x 19.68" EM chuck tbl.,
19.68" long tbl. trvl., 9.84" cross trvl., 118–984 IPM tbl. spds., 7.87" dia. grndng. whl., 2,850 RPM whl.
spd., 2 HP, S/N 087.
89A HORIZONTAL HONE, SUNNEN MDL. MBB-1290D, 0.120"–2.625" I.D. dia. cap., 1.875" max. hone
length in 0.125" bore, 18" max. hone length in 2.625" bore, 300/450/650/800 RPM spndl. spds., 1.75"
tool socket, 12 gal. oil cap., 17" x 24" flow back tray w/splash guards, 0.5 HP, self-energizing spndl.
brake, belt driven oil pump, foot pedal, lots of tooling w/cabinet, S/N 17780.
Page 4
HMT Final Auction CatalogLOT QTY DESCRIPTION
90 1 INITIAL PINCH PLATE BENDING ROLL, BERTSCH 6' X 1-1/8", Mdl. 14, 3-roll design, 6' x 1-1/8" cap.
boiler duty, 6' x 29/32" cap. pipe duty, 14" lower rolls dia., 13" top roll dia., 6'-2" rolls length, 6'-7' btwn.
frames, 30 HP main, 20 HP rear roll, hyd. drop end, for./rev. lever, foot pedal, oper. ctrl. station, roll pos.
indicators, S/N M-10123.
91 1 VERTICAL TURRET LATHE, BULLARD CUTMASTER 42", 42" dia. 3-jaw chuck tbl., 45" swing
w/sidehead, 54" swing w/o sidehead, 37" under rail, 25" rail adj., (20) tbl. spds.: 4–150 RPM, (16) fds.:
0.0026–0.500 IPR, 30-3/8" vert. turret trvl., 26-3/8" horiz. turret trvl., 30 deg. L-R turret head swivel, 30
HP, 5-pos. swivel turret head, 4-pos. sidehead, rapids, pendant, no pit required, S/N 28900.
92 1 SINGLE SPINDLE LAYOUT DRILL, CLEEREMAN, 18" x 36" tbl., 30" tbl. long trvl., 15" cross trvl., (24)
spndl. spds.: 75–1,500 RPM, 3-7/8" quill dia., No. 4 MT, 12" spndl. trvl., 25" spndl. to tbl. 14", spndl. to
column ways, 9" sliding HD adj., fds.: 0.001–0.010 IPR, 5 HP, coolant pump, S/N EB220.
92A 1 SINGLE SPINDLE DRILL, CLEEREMAN, 18" x 36" tbl., 30" tbl. long. trvl., 15" cross trvl., (24) spdl.
spds: 25-1000 RPM, 3-7/8" quill dia., No. 4 MT, 12" spdl. trvl, 25" spdl to tbl, 14" spdl to col ways, 5 HP,
coolant pump, rapids, drill chk, S/N EB138
93 1 TABLE TYPE HORIZONTAL BORING MILL, MONTI 4", Mdl. MCS100, 4" spndl., ISO 50 taper, 27.5"
spndl. trvl., (18) spndl. spds.: 12–1,200 RPM, 47" x 59" rotation tbl., 8,800 lb. load, 74.8" tbl. cross trvl.,
59" tbl. long trvl., 47.2" headstock vert. trvl., 236 IPM rapids, 15 HP, D.R.O, 4-axis, (2) displays, pendant,
pwr. drawbar, outriggers, univ./vert. head, lots of tooling, S/N N/A.
94 LOT TOOLING (on two pallets) Goes with Lot 93.
95 1 ENGINE LATHE, SOUTHBEND 9" X 24", 9-1/4" sw. over bed, 5-1/2" over cross slide, 24" btwn. cntrs.,
450–1,270 RPM, 4 to 224 TPI, 2-1/8" tlstk. spndl. trvl., 5" 3-jaw chuck, collet closer with misc. collets,
tlstk., thread dial, single tool post, chip pan bed, S/N 146161.
96 1 PEDESTAL GRINDER, H.D.
97 1 JIG MILL, DEVLIEG 4", Mdl. 43K-48, 4" spndl., No. 50 taper, 48" x 35" tbl., 48" horiz. trvl. (X), 36" vert.
trvl. (Y), 20" spndl. trvl. (Z), 16" tbl. retraction, spds.: 17–1,660 RPM, 15/7.5 HP, 2-spd., pendant ctrl.,
telescoping way covers, S/N 769022.
98 1 TUMBLE BLAST MACHINE, VANGUARD MDL. LP-500, new 2007, 1,100 lb. max. load, 66 lb. max.
unit weight of workpiece, 3,300–4,400 lb./hr. prod., 16.5" whl. dia., 2,880 RPM whl. spd., overall size of
main body: 79"L x 81"W x 179"H, overall size of dust collector: 40"L x 59"W x 128"H, S/N 0611032.
99 1 WELDING MANIPULATOR, VANGUARD 19' X 19', Mdl. LHW6X6, 19' vert. trvl., 19' horiz. trvl., 180
deg. column rot., 56"–291" boom height frm. floor, 49"–283" boom ext. frm. column, pwr. trvl. car base,
20' rail for trvl. car, (2) Lincoln DC-600, (2) Lincoln NA-3 ctrls., (1) flux rec., misc. ctrl. cables, weld
cables, pendant ctrl., S/N 5608059.
100 1 WELDING MANIPULATOR, PANDJIRIS 17' X 21', Mdl. 1600, 17' vert. trvl., 21' horiz. trvl., pwr. trvl. car,
pwr. column rot., S/N 400-2650.
101 LOT (3) PC. PIPE SADDLE CUTTERS, MATHEY-DEARMAN
102 1 HORIZONTAL WHEEL PRESS, PAGE 500 T. CAP.
103 1 HYDRAULIC WHEEL PRESS, WATSON STILLMAN, 20" dia. cyl., 12" stroke, 15 HP hyd. mtr., 10' max.
dist. face of ram to strain bar, S/N 9262.
Page 5
HMT Final Auction CatalogLOT QTY DESCRIPTION
104 1 WELDING POSITIONER, AMERICAN EAGLE 1,100 LB. CAP., Mdl. 300-60, 1,100 lbs. @ 12" C.G., 660
lbs. @ 24" C.G. 471 lbs. @ 36" C.G., 367 lbs. @ 48" C.G., 300 lbs. @ 60" C.G., 36" dia. tbl., 0–135 deg.
tilt, pwr. rot., pwr. tilt, 3-jaw gripper chuck (Pandjiris), vari.-spd., hyd. drive, pendant, foot pedal, S/N
0011189RCFS.
105 1 WELDING POSITIONER, AMERICAN EAGLE 1,100 LB. CAP., Mdl. AE-10, 1,100 lbs. @ 12" C.G., 660
lbs. @ 24" C.G., 471 lbs. @ 36" C.G., 367 lbs. @ 48" C.G., 300 lbs. @ 60" C.G. 30" dia. tbl., 0–135 deg.
tilt, pwr. rot., pwr. tilt, 3-jaw chuck, vari.-spd., hyd. drive, pendant, foot pedal, S/N 002AE101189.
106 1 BACKGEARED GAP FRAME PRESS, MINSTER 75 T. CAP., No. 7, 4" stroke, 17.5" shut height
(S.D.A.U.), 3.5" slide adj., 37" x 25" bed, 19" x 14" bed open, 32" x 20" slide, 13" throat, 18" back
opening width, 50–100 SPM, 33.5" floor to bed, 4.5" T-slot bolster, 15 HP, air clutch and brake, air
counterbalance, palm buttons, Vamco TS-6 roll feeder, S/N 7-FB-28007
107 1 BACKGEARED GAP FRAME PRESS, MINSTER 75 T. CAP., No. 7, 4" stroke, 17.5" shut height
(S.D.A.U.), 3.5" slide adj., 37" x 25" bed, 19" x 14" bed open, 32" x 20" slide, 13" throat, 18" back
opening width, 50–100 SPM, 33.5" floor to bed, 4.5" T-slot bolster, 15 HP, air clutch and brake, air
counterbalance, palm buttons, CWP-712 roll feeder, S/N 26891
108 1 BACKGEARED O.B.I. PRESS, WALSH 65 T. CAP., Mdl. 65, 4-7/8" stroke, 11" S.D.A.U. shut height,
34" x 18" bed, 14" x 12-1/2" slide, 2-1/2" slide adj., 2-1/2" shank hole dia., 10" throat depth, 16" back
opening, 40 SPM, 1-1/2" bolster, 5 HP, air act. mech. clutch, knockout slot in slide, pedestal push button
ctrl., S/N 6608.
109 1 BACKGEARED O.B.I. PRESS, WALSH 65 T. CAP., Mdl. 65, 4" stroke, 9" S.D.A.U. shut height, 34" x
18" bed, 17" x 12-1/2" slide, 2-1/2" slide adj., 2-1/2" shank hole dia., 10" throat depth, 16" back opening,
40 SPM, 3" bolster, 5 HP, air act. mech. clutch, knockout slot in slide, pedestal push button ctrl., S/N
6954.
110 1 BACKGEARED O.B.I. PRESS, WALSH 65 T. CAP., Mdl. 65, 4" stroke, 9" S.D.A.U. shut height, 34" x
18" bed, 14" x 12-1/2" slide, 2-1/2" slide adj., 2-1/2" shank hole dia., 10" throat depth, 16" back opening,
40 SPM, 3-1/2" bolster, 5 HP, air act. mech. clutch, knockout slot in slide, pedestal pushbutton ctrl., S/N
5716.
111 1 BACKGEARED O.B.I. PRESS, WALSH 65 T. CAP., Mdl. 65, 4-1/2" stroke, 11" S.D.A.U. shut height,
32" x 18" bed, 17" x 12-1/2" slide, 2-1/2" slide adj., 2-1/2" shank hole dia., 10" throat depth, 16" back
opening, 40 SPM, 4-1/2" bolster, 5 HP, air act. mech. clutch, knockout slot in slide, S/N 11011.
112 1 BACKGEARED O.B.I. PRESS, NIAGARA 60 T. CAP., Mdl. AF4, 6" stroke, 11.5" shut height, 3" ram
adj., 32" x 21" bed area, 14" x 15.75" ram area, 11" opening thru back, 2" punch shank hole dia., 45
SPM, 5 HP, dual palm buttons, air clutch and brake, 2.25" bolster plate, flywheel and gear guards, S/N
37897.
113 1 SINGLE CRANK GAP FRAME PRESS, ELKHART 45 T. CAP., Mdl. 45, 3" stroke, 3" slide adj., 28" x
18" bed area, 18" x 12" slide area, 12.375" S.D.A.U., shut height, 7.5" throat depth, 13.75" back opening,
36.5" floor to top of bolster plate, 7.5 HP, air clutch and brake, palm buttons, auto. lube, stroke meter,
bed enclosure guards, Wintriss Smart Pac ctrls., PFS Systems-Waddington stock feeder/straightener,
S/N 45096005.
Page 6
HMT Final Auction CatalogLOT QTY DESCRIPTION
114 1 SINGLE CRANK GAP FRAME PRESS, ELKHART 45 T. CAP., Mdl. 45, 3" stroke, 3" slide adj., 28" x
18" bed area, 18" x 12" slide area, 12.375" S.D.A.U., shut height, 7.5" throat depth, 13.75" back opening,
36.5" floor to top of bolster plate, 7.5 HP, air clutch and brake, palm buttons, auto. lube, stroke meter,
bed enclosure guards, Wintriss Smart Pac ctrls., PFS Systems-Waddington stock feeder/straightener,
S/N 45096004
115 1 FLYWHEEL O.B.I. PRESS, KENCO 32 T. CAP., Mdl. 32-104, 2" stroke, 12" S.D.A.U. shut height, 22" x
14" bed, 12-1/2" x 9-1/2" ram area, 1-1/2" shank hole dia., 120 SPM, 2-1/2" bolster, 3 HP, S/N 32-40-
1006.
116 1 UNIVERSAL IRONWORKER, BUFFALO NO. 1-1/2, 65 T. cap. ram press, 44 SPM, 24" throat, shear, 6"
x 3/4" cap., 12" knives length, punch, 1-1/16" x 3/4" cap., bar cutter, notcher, 90 deg. on punch end, sq.
on shear end, one-shot lube, 3 HP, S/N 52Z0621.
116A 1 COIL CRADLE & STRAIGHTENER, KEMPLER 3,000 LB. CAP., Mdl. 810, 3,000 lbs. wt. cap., 48"max.
O.D. cap., 18" max. width, S/N ACC-24-6
116B 1 COIL CRADLE, LITTELL 2,000 LB. CAP., Mdl. CC20-20, 40" max. O.D. cap., 20" max. width, 2 HP,
S/N 50086-53-2
116C 1 COIL CRADLE, ROWE 2,000 LB. CAP., Mdl. 2010-PR, 40" max. O.D. cap., 84 FPM feed rate, 3/4 HP,
S/N 11647
116D 1 COIL CRADLE, ROWE 1,200 LB. CAP., Mdl. 810, 36" max. O.D. cap., 90 FPM feed rate, 1/2 HP, S/N
8357
117 1 HYDRAULIC PRESSBRAKE, CINCINNATI 350 T. CAP., Mdl. 350CB, 1/2 x 10' bend cap. (mild steel),
12' die space, 10'-6" btwn. housings, 10" stroke, 10" throat, 18" open height, 8" closed height, 65 inches
per minute rapid adv., 33 IPM fast press, 9 IPM full tonnage press, 67 IPM return, 35 HP, S/N 42965.
118 LOT TOOLING: 144" offset punch & 144" 4-way die
119 LOT TOOLING: (2) 99" punches & (2) Cincinnati punches
119A 1 HYDRAULIC POWER SQUARING SHEAR, PACIFIC 20' X 1/2", Mdl. 500R20, 20' x 1/2" cap. @ 3/8"/ft.
rake ang., max. rake ang. 5/8"/ft., 20' x 3/4" shear cap. @ max. rake ang., 1-1/8" x 5" x 244" knife, 20'-3"
btwn. housings, 18" throat, 63 T. hold down pressure, 36" tbl. height, 40 HP, 48" pwr. backgauge, auto.
lube, foot switch, S/N S10468.
120 1 POWER SQUARING SHEAR, PACIFIC 10' X 3/4", Mdl. 750-S10A, 10' x 3/4" @ 1/2" per ft. rake angle,
10' x 1" at 3/4" per ft. rake angle, 124" knives length, 10'-3" btwn. housings, 18" gap, (11) hold-downs, 33
T. hold-down press., 40 HP, frt. oper. pwr. backgauge, adj. stroke length, adj. rake angle, adj. knife
clearance, squaring arm, S/N 10141.
121 1 POWER SQUARING SHEAR, CINCINNATI 12' X 3/4", Mdl. 6212, 144" width cap., 3/4" thickness cap.,
12'-3" btwn. housings, 30 SPM, 600 RPM flywheel, 65" frt. gauge range, 36" backgauge range, 18"
throat, 39 T. hold-down press., 1.5" x 5.5" four-edge knives, 32" tbl. height, 20" below floor, 12'-5" knives,
30 HP, frt. oper. pwr. backgauge, 12' sq. arm, extra set knives, S/N 28239.
122 1 MECHANICAL PRESSBRAKE, CINCINNATI 225 T. CAP., Series 13-10, 135 T. to 145 T. cap. mid
stroke, 225 T. to 250 T. cap. full stroke, 16'-8" bed and ram, 10'-6" btwn. housings, 0.5" x 8' bend cap.,
7" stroke length, 6" ram adj., 10" throat, 12" S.D.A.U. shut height, 30 SPM, 20 HP, power ram adj.,
mech. brake and clutch, top sect. clamps, 34" deep pit req., S/N 29045.
Page 7
HMT Final Auction CatalogLOT QTY DESCRIPTION
123 1 HYDRAULIC PRESSBRAKE, CINCINNATI 175 T. CAP., Mdl. 175CB-10, 1/4" x 10' bend cap. mild stl.,
12'-0" die space, 10'-6" btwn. housings, 10" stroke, 8" throat, 17" open height, 7" closed height, 132
inches per minute rapid, 65 IPM fast press, 18 IPM full ton press, 127 IPM return, 30 HP, Automec CNC
150/G24 bkgge, flush floor mnt, palm button oper. station, foot pedal, auto. lube, S/N 48546.
123A 1 VERTICAL TURRET LATHE, BULLARD DYNATROL 56", 56" 3-jaw manual chuck, 68" swing
w/sidehead below tbl., 48" under rail, (20) tbl. spds.: 5.47–200 RPM, 30-3/4" vert. turret trvl., 46-3/4" vert.
sidehead trvl., 31-3/4" horiz. side head trvl., 50 HP, 5-sided turret head w/pwr. index, sidehead w/pwr.
index, pwr. rail clamp, rapids in all directions, auto. lube, hard chrome insert ways on rail, S/N 31915.
124 1 VERTICAL TURRET LATHE, BULLARD DYNATROL 46", 46" tbl. w/4-jaw ind. chuck, 49" swing
w/sidehead working, 58" swing w/sidehead below tbl., 40" under rail, 30" rail adj., (20) tbl. spds.:
6.83–250 RPM, fds.: 0.001–0.250 IPR, 26" vert. turret trvl., 31" horiz. right of cntr., 34-1/2" horiz. left of
cntr., 30 deg. R-L swivel, 38-3/4" vert. sidehead trvl., 23-3/4" horiz., 37" tbl. height, 5-pos. turret head, 4-
pos. side head, repl. chrome insert ways on rails, manual rail clamp, rapids, S/N 32093 (Parts Machine).
125 1 RADIAL DRILL, CINCINNATI BICKFORD 6'-17", dbl. end base, drills to center of 144" cir., spds.:
12–1,500 RPM, No. 6 MT, 11-3/4" min. center, 23-3/8"–83-5/8" spndl. radius, 11-1/2"–72" spndl. dist. to
base, 50" x 78" base rt., 50" x 84" base lft., 18" spndl. trvl. 15 HP, pwr. elev., pwr. clamp, coolant pump,
rapids, S/N 5E-643. Inc. 44" HPM (High Performance Machine) CNC rot. tbl., 44" tbl. dia., 8 T-slots, 17
3/4" tbl. ht., Gettys mtr., S/N 78104.126 1 TABLE TYPE HORIZONTAL BORING MILL, LUCAS 5", Mdl. 542B120, 5" spndl., No. 50 taper, 36"
spndl. trvl., spds.: 9–1,200 RPM, 48" x 110" tbl., 96" tbl. cross trvl., 60" saddle trvl., 60" headstock vert.
trvl., 20 HP, hardways, pendant, S/N 42B1409.
127 1 HYDRAULIC POWER SQUARING SHEAR, PACIFIC 12' X 3/8", Mdl. 375R12, 12' x 3/8" at 5/16"/ft.
rake angle (mild steel), 1/2"/ft. max. rake angle, 12' x 1/2" shear cap. @ max. rake, 12'-3" btwn.
housings, 18" throat, (14) hold-downs, 32 T. hold-down press, 36" frt oper. pwr. backgauge, 34-3/4" tbl.
height, 1" x 4" x 148" knife, 30 HP, sq. arm, (2) front suppt. arms, extra set knives, foot switch, pwr. rake
ang. adj., stroke ctrl. adj., ball transfers in bed, knife clearance adj., knife and hold-down guard, S/N
S10597.
128 1 VERTICAL BORING MILL, FRORIEP 102", 102" dia. chuck, 240" swing w/cross rail head, 218" max.
turning dia. to cntr., 25 T. cap. tbl., tbl. spds.: 0.38–38 RPM, 45.5" vert. turret trvl. on cross rail, 123"
horiz. turret head trvl. on cross rail, 5-pos. turret, 35" cross rail vert. adj., 75 HP, new electrics, pwr.
indexing turret, pwr. column movement, pwr. column clamp, all new electrics in cabinet, S/N 9.156.00.
129 1 VERTICAL BORING MILL, KING 52", 52" dia. tbl., 59-3/8" swing w/sidehead below tbl., 56" w/sidehead
working, 44" under rail, 32" rail adj., (4) tbl. spds.: 2.25–110 RPM, 10 FPM rapid, R.H. ram: 35-1/2" horiz.
trvl., 43-1/2" vert., L.H. ram: 35-1/2" horiz. trvl., 43-1/2" vert., 60 deg. ram swivel, 15-7/8" btwn. R.H./L.H.
ram heads, side head: 25" horiz. trvl., 41-1/2" vert., 30 HP, pendant, S/N 2693.
130 1 TABLE TYPE HORIZONTAL BORING MILL, PLAUERT & WETZEL 4", 4" spndl., No. 5 MT, spndl.
spds.: 4.5–1,250 RPM, 35" spndl. trvl., 61" x 70" rotation tbl., 84" tbl. cross trvl., 66" tbl. long trvl., 60"
headstock vert. trvl., fds.: 0.0008–0.038 IPR, 15 HP, 26" facing head, outriggers, pendant, outboard
suppt., right angle head, Newall 3-axis D.R.O., S/N N/A.
131 1 UNIVERSAL VERTICAL GRINDER, SPRINGFIELD 36" RAIL TYPE, Mdl. 2-1/2-ATR, 36" tbl., 50" sw.,
21" grndng. head stroke, 36" dist. over tbl., 1–175 RPM spndl. spds., 0–45 deg. head angle, 10 HP whl.
spndl., 3 HP hyd., pendant ctrl., coolant pump, rail elev., whl. dresser, S/N 66015.
131A LOT (2) SPRINGFIELD MDL. 3-TR CARRIAGES, SLIDES & SPINDLES
Page 8
HMT Final Auction CatalogLOT QTY DESCRIPTION
132 1 VERTICAL GRINDER, FRAUENTHAL SERIES 1800, rebuilt by Phoenix in 1999, 52" tbl., 65" sw., 72"
under rail, 24" spndl. trvl., vari.-spd. tbl., vari.-spd. grndng. spndl., man. pulse gen., pendant ctrl. w/touch
screen, servo-driven axes, Barnes coolant sys., Donaldson Torit 15 HP wet type dust collection sys.,
handles both I.D. and O.D. work, oper. platform, S/N 18-154.
133 1 CABINET, 11-drawer, w/gun drills
134 1 AIR LIFT ROTARY TABLE, FARMINGTON 96", 50 T. tbl. load, 22-1/2" tbl. height, (12) T-slots,
motorized rotation, air bearing lift, pwr. clamp, S/N DR-96-173-6714.
135 1 AIR LIFT ROTARY TABLE, GIDDINGS & LEWIS 48" X 72", 48" x 72" work surface, 48" x 52" base,
25,000 lb. load, 6 T-slots, 7/8" width, on 7-1/2" cntrs., 1/2 deg. tbl. scare increments, 15-1/2" tbl. height,
S/N 450-2228-98.
136 1 AIR LIFT ROTARY TABLE, LUCAS 48" X 72", (6) T-slots on 7" cntrs., 27,000 lb. load, 360 deg. scale
in 1/2 deg. increments, (4) lock positions @ 90 deg., 12" base to top, air lift, manual clamping, S/N
48BP0110.
137 1 AIR LIFT ROTARY TABLE, LUCAS 48" X 60", (6) T-slots on 7" cntr. lines, 27,000 lb. tbl. load, 360 deg.
rotation. in 1/2 deg. increments, (4) lock bolt positions @ 90 deg. 12" base to top, air lift, manual clamp,
6,500 lbs. approx. weight, S/N 48BPO423.
138 1 AIR LIFT ROTARY TABLE, LUCAS 36" X 60", (6) T-slots on 4-1/2" cntr. lines, 16,000 lb. tbl. load, 360
deg. rotation in 1/2 deg. increments, (4) lock bolt positions @ 90 deg., 9-3/4" base to top, air lift, manual
clamp, 5,000 lbs. approx. weight, S/N 36BPO459.
139 1 THREAD MILLER, LEES BRADNER MDL. HT 12X102, 24" sw. over bed, 12" sw. over carriage, 102"
btwn. cntrs., spndl. spds.: 21–103 RPM, 3 HP mill head, 3 HP hdstk., 15" 3-jaw chuck, milling head,
tlstk., coolant, followrest, S/N HT-652
140 1 THREAD MILLER, LEES BRADNER MDL. HT 12X102, 24" sw. over bed, 12" sw. over carriage, 102"
btwn. cntrs., spndl. spds.: 21–103 RPM, 3 HP mill head, 3 HP hdstk., 15" 3-jaw chuck, milling head,
tlstk., coolant, followrest, S/N HT-1434.
140A 1 THREAD WHIRLING HEAD, BURGSMULLER TYPE L-3: This unit was specifically constructed for the
production of high accuracy leadscrews. It may be fitted to any screw cutting lathe or long thread milling
machine w/a center height of at least 180 mm above the cross slide surf. 20–140 mm cap., (4) tools,
140 mm bore, max. 20 deg. helix angle, 380–1,220 tool RPM, 180 mm cntr. height, 5.5Kw mtr., (10) die
heads, (2) shaft supports w/misc. guide bushings, misc. cutting tools, S/N 77-2713.
141 1 ELECTRIC WAREHOUSE SCOOTER, U.S. ELECTRICAR, S/N 505615
142 1 ELECTRIC WAREHOUSE SCOOTER, U.S. ELECTRICAR, S/N 539095C051
143 1 ELECTRIC WAREHOUSE SCOOTER, CUSHMAN, 3-wheel
144 1 4TH ROTARY INDEXER, 20" x 20", w/tailstock
145 1 ROTARY INDEXER, 24"
146 1 TRACER ATTACHMENT, MIMIK
147 1 MILLING HEAD, KEARNEY & TRECKER, dbl. swivel, No. 50 taper
148 1 HORIZONTAL/VERTICAL ROTARY TABLE, TROYKE 18", Mdl. U-18, S/N 3918-1.
149 1 ROTARY INDEXER, 10"
150 1 VERTICAL ROTARY TABLE, TSUDAKOMA 16", Mdl. RNCM-400, 15" dia. 3-haw chuck w/2-piece
jaws, 10" center height, 1-1/2" center bore, 440 lbs. load vert., 1,100 lbs., horiz., 11.1 RPM, S/N 204680
151 1 MILLING HEAD, FUTUREMILL, No. 50 taper, 30 HP, spds: 53-900 RPM
Page 9
HMT Final Auction CatalogLOT QTY DESCRIPTION
152 1 HYDRAULIC SURFACE GRINDER (DIE BLOCK), MATTISON 36" X 120", 36" x 120" tbl., 36" max.
grndng. width, 120" max. grndng. length, 36" under grndng. whl., 20" grndng. whl. dia., 6" grndng. whl.
width, 75 HP, 24" x 120" electro-mag. chuck, neutrofier, incr. pwr. down feed, pendant, paper filtration,
S/N 19746.
153 1 VERTICAL SPINDLE GRINDER, HANCHETT 20" X 96", Mdl. 400, reciprocating table, 18" width
finished tbl. top, 29" tbl. width overall, 96" tbl. grndng. length, 18" under whl., 22" seg. grndng. whl., 700
RPM spndl. spd., 40 HP, 20" x 96" mag. chuck, coolant sys., rapids, auto. down feed, S/N 40057.
154 1 VERTICAL TURRET LATHE, FRORIEP 55", 55" tbl. w/(4) boring mill jaws, 63" swing w/o sidehead, 59"
w/side head, 44" under rail, 4 T. cap. tbl. load, tbl. spds.: 2.8–140 RPM, fds.: 0.002–0.154 IPR, 27" turret
vert. trvl., 30" sidehead horiz. trvl., 78 IPM rapids, 30 HP, pendant, S/N W16690.
155 1 CNC VERTICAL BORING MILL, SCHIESS-FRORIEP 49", Mdl. 16DS125, Forkhardt valve indexing
chuck, 63" max. swing, 63" max. turning height, 40" vert. ram trvl., 40" horiz. ram trvl., 43.31" cross rail
adj., 10" sq. ram, 17,600 lb. max. workpiece weight, 75 HP, (2) gear ranges–(29) spds. per gear range,
tbl. spds.: 3.15–315 RPM, 12-pos. tool changer, single-column design, ram head on rail, S/N 1171.0452.
156 1 CNC VERTICAL BORING MILL, BULLARD DYN-AU-TAPE 56", 56" tbl. w/4-jaw pwr. combination
chuck, 68" swing, 68" under rail (24" extra), 50" ram head vert. trvl., 41.5" ram head horiz. trvl., 12.75"
H.D. ram, 58.5" cross rail trvl., 100 HP, spds.: 2–320 RPM, 24" extra column height, 16-station tool block
changer, 2-spd. transmission, pwr. rail binders, no ctrl., S/N 33527.
156A LOT TOOL BLOCKS, BULLARD DYN-AU-TAPE
157 1 VERTICAL TURRET LATHE, SCHIESS 70", Mdl. 20DKE180, 70.9" 4-jaw chuck, 73" swing, 49.2" under
rail, 35.4" vert. cross rail trvl., 26,500 lb. load, tbl. spds.: 4–200 RPM, 27.5" vert. turret trvl., +/-45 deg.
turret swivel, 4-pos. pwr. turret on rail, 4-pos. sidehead, elevating rail, (2) toolholders on turret head, no
main drive motor or pendant, S/N 78996.
158 1 VERTICAL BORING MILL, GIDDINGS & LEWIS HYPRO 54", 52" dia. plain tbl. w/par. and rad. T-slots,
57" swing, 46" under rail, (4) tbl. spds.: 3.1–144 RPM, (16) fds.: 0.003–0.500 IPR, 32" ram vert. trvl., 2-
3/4" ram bore, 27" turret head trvl., 2-3/4" turret head bore, 26" side head horiz. trvl., 36" side head vert.
trvl., 50 HP, L.H. swivel ram head, R.H. turret head, side head, pendant, rapids, pwr. rail clamp, flush
floor mount (no pit required), S/N 550-34-56.
159 1 VERTICAL BORING MILL, KING 42", 42" tbl. w/(4) boring mill jaws, 45" swing w/sidehead, 47" swing,
48" under rail, 35" rail adj., (16) tbl. spds.: 3.10–93.0 RPM, (16) fds.: 0.0025–0.125 IPR, +/-60 deg. ram
head swivel, 25 HP, threading on ram head, fine fds., pendant, rapids, S/N 2665.
160 1 CNC BRIDGE TYPE VERTICAL MACHINING CENTER, VANGUARD MDL. GMB100X20, 39” X 78”
table, 49” dist. btn. column, 6,600 lb. load, 78” X travel, 39” Y travel, 23” Z travel, No. 50 taper, spds: 40-
6000 RPM, 25 HP, Fanuc 18-Mi CNC control, Heidenhain scales, pulse gen., ridged tapping, coolant
chip conveyor, S/N 060703 (Missing parts)
161 1 CNC JIG MILL, DEVLIEG 6", Mdl. 65K-96, 6" spndl., No. 50 taper, 96" x 50" tbl., 96" horiz. trvl., 72" vert.
trvl. (12" extra), 36" spndl. trvl., 24" tbl. retraction, 30 HP, spds.: 10–1,000 RPM, no ctrl., S/N 9680.
162 1 VERTICAL TURRET LATHE, GIDDINGS & LEWIS 36", 36" tbl. dia., 4-jaw pwr. comb. chuck, 48"
swing, 48" under rail (12" extra), 36" rail trvl., 36" vert. turret trvl., 57" height under turret face, 30 deg. L-
R turret swivel, 40 HP, tbl. spds.: 5–380 RPM, pendant ctrl., pwr. indexing, turret thread and angle
turning attach., coolant system, S/N 510-19-66.
Page 10
HMT Final Auction CatalogLOT QTY DESCRIPTION
163 1 TABLE TYPE HORIZONTAL BORING MILL, SELLERS 5", 5" spndl., spds.: 5.8–334 RPM, No. 7 MT,
36" spndl. trvl., 48" x 88" tbl., 72" tbl. cross trvl., 62" tbl. long trvl., 48" headstock vert. trvl., 15 HP, Newall
3-axis D.R.O., rapids, threading, S/N N/A. (Note: Rotation table in photo does not go with machine)
164 1 CNC TABLE TYPE HORIZONTAL BORING MILL, CINCINNATI GILBERT 5", Allen Bradley 9 Series
CNC ctrl., 5" spndl., No. 50 spndl. taper, spndl. spds.: 5–1,000 RPM, 48" x 96" T-slotted tbl., 35" spndl.
trvl. (Z), 96" tbl. cross trvl. (X), 72" headstock vert. trvl. (Y), 45" saddle trvl. (W), 140" saddle length, 108"
bedways length, spndl. fds.: 0.05–200 IPM, milling and saddle fds.: 0.05–100 IPM, 30 HP, pendant,
outriggers, pwr. drawbar, central lube system, ballscrews, S/N 292-J.
165 1 CNC VERTICAL TURRET LATHE, BULLARD DYN-AU-TAPE 46", 46" tbl. dia., 4-jaw chuck (no master
or top jaws), 58" max. swing, 33" max. height under rail, 22" cross rail adj., 37" vert. turret trvl., 35.5"
horiz. turret trvl., (20) tbl. spds.: 5.12–187 RPM, 5-sided pwr. index turret head, pwr. elevation, pwr.
clamp, S/N 32614 (No CNC ctrls.).
166 1 VERTICAL BORING MILL, SUMMIT 60", 57" tbl. w/(4) boring mill jaws, 65" swing, 17,500 lb. load, 47"
max. machine height over tbl., 30" turret head vert. stroke, 47" ram head vert. stroke, 35 deg. L-R swivel
head, 27-1/2" sidehead horiz. trvl., 43" vert., (16) tbl. spds.: 4–203 RPM, 75 HP, pendant, coolant, misc.
turret tooling, S/N 2995-76.
166A 1 HYDRAULIC SURFACE GRINDER, THOMPSON 12" X 40", 12" x 40" mag. chuck tbl., 48" tbl. trvl., 16"
under whl., 30 HP, push button oper. ctrl. station, splash guards, coolant pump, S/N C555570.
167 1 CNC VERTICAL BORING MILL, GRAY RINGMASTER 48", Fanuc 15T CNC ctrl., 48" tbl., 56" max.
swing, 48" max. height under rail, 30" turret head vert. trvl., 30" turret head horiz. trvl. right of cntr., 6"
turret head horiz. trvl. left of cntr., 50 HP, tbl. spds.: 9.5–290 RPM, 5-sided turret head w/pwr. index, pwr.
rail elevation, pwr. rail clamp, auto. lube, S/N 9811.
168 1 VERTICAL TURRET LATHE, BULLARD DYNATROL 56", 56" dia. tbl. w/3-jaw manual chuck, 68"
swing w/side head below tbl., 48" under rail, (20) tbl. spds. to 200 RPM, R.H. ram: 60" vert. trvl., L.H.
ram: 60" vert. trvl., sidehead: 46-3/4" vert. trvl., 31-3/4" horiz. trvl., 50 HP, 4-sided pwr. index turret on
R.H. and L.H. rams, pendant ctrl., S/N 31859.
169 1 TABLE TYPE HORIZONTAL BORING MILL, WOTAN 5-1/8", Mdl. B130l, 5-1/8" spndl., No. 6 MT, 35"
spndl. trvl., (33) spndl. spds.: 2.5–1,000 RPM, (27) fds.: 0.0013–0.500 IPR, 60" x 118" tbl., 108" tbl.
cross trvl., 75" long trvl., 70" headstock vert. trvl., 112 IPM rapids, 183" saddle, 25 HP, Pratt & Whiney
50" pwr. rotation tbl., 28" facing head, Sony 3-axis D.R.O., right angle head, spndl. suppt., outriggers,
threading, pendant, misc. tooling, S/N 54348.
170 1 VERTICAL BORING MILL, BULLARD DYNATROL 86" HIGH COLUMN, 86" dia. plain tbl., 92" swing
w/side head, 98" swing w/o side head, 132" under rail (48" extra), 122" cross rail vert. trvl., 140-1/2" tbl.
to ram face, 110" R.H. ram vert. trvl., 110" L.H. ram vert. trvl., 30 deg. swivel, (20) tbl. spds.: 3–120
RPM, fds.: 0.003–0.750 IPR, 126,000 lb. weight, pistol grip style ctrls., hyd. rail binders, S/N 30979.
170A 1 CHUCK, BULLARD, 92" dia. 4-jaw
171 1 VERTICAL TURRET LATHE, BULLARD DYNATROL 56", 56" tbl. w/3-jaw manual chuck, 68" swing
w/o sidehead, 45.5" under rail, (20) tbl. spds.: 5.47–200 RPM, 27" vert. turret trvl., 44.5" vert. side head
trvl., 26.5" horiz. sidehead trvl., 50 HP, pwr. index turret, pwr. index sidehead, S/N 31893.
172 1 FLAT CHUCK, 56" dia. 3-jaw, 19-1/2" hole, 2-piece jaws
Page 11
HMT Final Auction CatalogLOT QTY DESCRIPTION
172A 1 CHUCK, BULLARD, 56" dia. 4-jaw
172B 1 FACE PLATE TYPE CHUCK, BULLARD 54"
173 1 CNC FLOOR TYPE HORIZONTAL GUN DRILL, TECHNIDRILL MDL. 200-2.0-48-5A-CNC, 6-axis CNC
ctrl., 0.1875"–2" drill dia. range, 48" Z-axis drill stroke w/(2) whip guides, 146" X-axis column trvl., 36" Y-
axis vert. column trvl., 146" x 48" T-slotted set-up tbl., 40,000 lb. cap., (2) spd. ranges: 600–6,000 RPM,
20 HP spndl. mtr., high-flow coolant sys., ABB spndl. drive, (2) 48" sq. pwr. index rot. tbls., chip conv.,
S/N 7120.
174 1 CNC TABLE TYPE HORIZONTAL BORING MILL, GIDDINGS & LEWIS 5", Mdl. 65-H5-T, Allen
Bradley 9 Series CNC ctrl., 5" spndl., No. 50 taper, 1,020 RPM, 48" x 72" tbl., 60" tbl. cross trvl., 48"
headstock vert. trvl., 36" spndl. trvl., 125" saddle bedways, 96" bed, 30 HP, 3-way vert. column, 4-way
bed, pwr. drawbar, pendant, S/N 420-31-62.
175 1 VERTICAL TURRET LATHE, BULLARD DYNATROL 36", 36" tbl. w/4-jaw chuck w/top jaws, 39" swing
w/sidehead, 48" swing w/o sidehead, 30" under rail, (20) tbl. spds.: 13–468 RPM, fds.: 0.001–0.250 IPR,
26" vert. turret trvl., 43-3/4" horiz. turret trvl., 28-3/4" vert. sidehead trvl., 23-3/4" horiz. sidehead trvl., 50
HP, 5-pos. turret on cross rail w/(2) toolholders, 4-pos. toolpost on sidehead, auto. lube, pendant,
coolant, S/N 31640.
176 1 ENGINE LATHE, SKODA 63" X 315" HEAVY DUTY, Mdl. SR 1600 X 8000, 63" sw. over bed, 48" sw.
over cross slide, 315" btwn. cntrs., (24) spndl. spds.: 1.8–355 RPM 61,600 lb. load btwn. cntrs., 67" bed
width, 60 HP, 60" faceplate w/(4) boring mill jaws, 4-way bed, carriage can pass tlstk. and steadyrests,
pwr. compound, live cntr. tlstk. quill, (2) steadyrests, 4-jaw chuck attach. for tlstk., rapids, S/N 17302.
177 1 VERTICAL TURRET LATHE, BULLARD SPIRAL DRIVE 54" HIGH COLUMN, 50" dia. tbl. w/4-jaw
chuck, 56" swing, 66-1/2" under rail (28" extra), 76-1/2" under turret face, (12) tbl. spds.: 3.5–60 RPM,
(8) fds.: 0.011–0.500 IPR, 27" turret vert. trvl., 56" turret horiz. trvl., 45 deg. turret swivel, 27" sidehead
horiz. trvl., 57" sidehead vert. trvl., 25 HP, 5-pos. turret, S/N 14644.
178 1 TABLE TYPE HORIZONTAL BORING MILL, GIDDINGS & LEWIS FRASER 5", Mdl. A130-T, 5.11"
spndl., No. 50 taper, 30" spndl. trvl., (4) spndl. spd. ranges, spds.: 6–1,120 RPM, fds. to 140 IPM, 140
IPM rapids, 48" x 96" tbl., 84" tbl. cross trvl., 156" saddle length, 70" headstock vert. trvl., 30 HP, pwr.
drawbar, outriggers, new pendant ctrl., new electrics w/PLC, mech. work: X, Z-axis ways reground,
mating surfaces re-scraped to fit, lube system checked and repaired, gibs, clamps and way wipers
cleaned and repaired, elec. work: New Electrics Inc. starters, relays and drives, new pendant-station
w/buttons and ctrls., S/N 150-1595.
179 1 VERTICAL TURRET LATHE, BULLARD CUTMASTER 56", Mdl. 75, 56" 3-jaw pwr. chuck tbl., 68"
swing, 48" under rail, (20) tbl. spds.: 5.4–200 RPM, (16) fds.: 0.00065–0.125 IPR, 36" rail adj., 32-7/8"
ram head horiz. trvl., 42" vert., 37" horiz. turret head trvl., 30-5/8" vert., (2) horiz. side head trvls., 46-3/4"
vert., 37" tbl. height, 40 HP, 4-sided turret head, pwr. index, pendant, Manautrol attach. for ea. head,
tracer attach. lift ram head, S/N 30560.
180 1 CNC VERTICAL TURRET CENTER, GIDDINGS & LEWIS 48", Giddings & Lewis 8000B CNC ctrl., 48"
plain tbl. w/T-slots, 60" swing, 72" under rail (24" extra), 60" rail trvl., 60 HP, (2) tbl. spds.: 3–333 RPM,
62" R.H. ram trvl., 50" L.H. live spndl. ram trvl., 25 HP, live spndl. spds.: 15–2,200 RPM, 30-pos. A.T.C.,
hard ways, pwr. rail elevation, chip conveyor, part probe, tool probe, flood coolant, coolant through ram,
from U.S. Government surplus, 2946.4 H.O.M., S/N 512-281-90.
180A LOT (10) TOOL BLOCKS, GIDDINGS & LEWIS, No. 60 taper,
Page 12
HMT Final Auction CatalogLOT QTY DESCRIPTION
180B LOT (6) EXTENDED TOOL BLOCKS, GIDDINGS & LEWIS
180C LOT (10) TOOL BLOCKS, GIDDINGS & LEWIS, No. 60 taper,
181 1 ELECTRICAL CABINET
182 1 ELECTRICAL CABINET
183 1 ELECTRICAL CABINET
184 1 ELECTRICAL CABINET
185 1 ELECTRICAL CABINET
186 LOT FANUC PARTS
187 LOT FANUC PARTS, MOTORS & CONTROLS
188 LOT FANUC CONTROLS & AMPS
189 LOT (9) FANUC MOTORS
190 LOT FANUC IT CONTROL w/IO motor & amp
253 LOT CONTENTS OF ROOM: Electrical wire, shelf system, metal table
254 LOT CONTENTS OF HALL WAY: Rubber V belts
258 1 STEEL BELT LACER, ACME, S/N F9414
261 LOT CONTENTS OF ROOM: computer parts, file cabinets, etc.
262 LOT SPARE PARTS (shelves not included)
263 LOT SPARE PARTS (shelves not included)
264 LOT SPARE PARTS (shelves not included)
265 LOT SPARE PARTS (shelves not included)
266 1 CABINET, 10-drawer, w/contents
267 LOT CONTENTS OF OFFICE: desks, glass book cabinet, etc.
268 1 CHUCK, WARNER & SWASEY A-11, 18" dia. 4-jaw, 5" hole, 2-piece jaws269 1 CHUCK, CUSHMAN D-6, 18" dia. 4-jaw, 4" hole, 2-piece jaws (no top jaws)
270 1 POWER WRENCH CHUCK, CUSHMAN L-2, 18" dia. 3-jaw, 5" hole, 2-piece jaws (no top jaws)
271 1 CHUCK, ROHM D-11, 18" dia. 4-jaw
272 1 POWER WRENCH CHUCK, WARNER & SWASEY A-15, 24" dia. 3-jaw, 9-1/4" hole
273 1 CHUCK, WARNER & SWASEY, 18" dia. 3-jaw
274 1 POWER WRENCH CHUCK, CUSHMAN B-15, 18" dia. 3-jaw, 6-3/4" hole, 2-piece jaws (no top jaws)
275 1 CHUCK, CUSHMAN A-11, 18" dia. 4-jaw, 5" hole, 2-piece jaws (no top jaws)
276 1 CHUCK, 22" dia. 4-jaw
277 1 CHUCK, WARNER & SWASEY A-20, 28" dia. 4-jaw, 12-1/2" hole (no screws or jaws)
278 1 FLAT CHUCK, CUSHMAN, 18" dia. 3-jaw, 7-1/4" hole, 2-piece jaws
279 1 CHUCK, 19" dia. 3-jaw
280 1 CHUCK, D-8, 32" dia. 4-jaw, 5-1/4" hole, solid jaws
281 1 FLAT CHUCK, CUSHMAN, 28" dia. 3-jaw, 12-3/4" hole, 2-piece jaws
282 1 CHUCK, SPECIALTY
283 1 FLAT CHUCK, 30" dia. 4-jaw, 16" hole, 2-piece jaws
284 1 POWER CHUCK, 32" dia. 3-jaw
285 1 POWER CHUCK, A-15, 24" dia. 3-jaw, serrated jaws
286 1 POWER WRENCH CHUCK, CUSHMAN A-20, 32" dia 3-jaw, 12-3/4" hole
287 1 EXTRA H.D. CHUCK, CUSHMAN A-15, 21" dia. 4-jaw, 8" hole, 2-piece jaws
Page 13
HMT Final Auction CatalogLOT QTY DESCRIPTION
288 1 CHUCK, WARNER & SWASEY A-15, 24" dia.. 4-jaw, 9-1/2" hole, 2-piece jaws (no top jaws)
289 1 CHUCK, CUSHMAN A-15, 24" dia. 4-jaw, 9-1/2" hole, 2-piece jaws
290 1 CHUCK, 24" dia. 4-jaw
291 1 POWER CHUCK, BULLARD, 36" dia. 3-jaw
292 1 CHUCK, BULLARD, 36" dia. 3-jaw
293 1 CHUCK, BULLARD, 36" dia. 3-jaw
294 1 CHUCK, BULLARD, 36" dia. 3-jaw
295 1 POWER CHUCK, BULLARD (DYNATROL), 36" dia. 4-jaw
296 1 CHUCK, BULLARD, 34" dia. 4-jaw (spiral drive)
297 1 CHUCK, 36"
298 1 POWER CHUCK, BULLARD (CUTMASTER 75), 36" dia. 4-jaw
299 1 POWER CHUCK, BULLARD (CUTMASTER 75), 36" dia. 3-jaw
300 1 POWER CHUCK, BULLARD (CUTMASTER 75), 36" dia. 4-jaw
301 1 PALLET RACK SECTION, 10 ht. x 27 W. X 3-1/2 dp.
302 LOT TAPS (in one drawer)
303 LOT TAPS (in one drawer)
304 LOT TAPS (in one drawer)
305 LOT TAPS (in one drawer)
306 LOT TAPS (in one drawer)
307 LOT TAPS (in one drawer)
308 LOT TAPS (in one drawer)
309 LOT TAPS (in one drawer)
310 LOT TAPS (in one drawer)
311 LOT TAPS (in one drawer)
312 LOT TAPS (in one drawer)
313 1 TOOL CABINET, 11-drawer
314 LOT TAPS (in one drawer)
315 LOT TAPS (in one drawer)
316 LOT TAPS (in one drawer)
317 LOT TAPS (in one drawer)
318 LOT TAPS (in one drawer)
319 LOT TAPS (in one drawer)
320 LOT TAPS (in one drawer)
321 LOT TAPS (in one drawer)
322 1 TOOL CABINET, 8-drawer
323 1 CHUCK, 55" dia. 4-jaw, 9" hole, solid jaws
324 1 INDEXING CHUCK, 30" dia. 3-jaw
325 1 FLAT CHUCK, 32" dia. 4-jaw, 6" hole, solid rev jaws
326 1 POWER CHUCK, WOODWORTH UNIVERSAL BALL-LOK, 32" dia. 3-jaw
327 1 POWER CHUCK, WOODWORTH UNIVERSAL BALL-LOK, 32" dia. 3-jaw
Page 14
HMT Final Auction CatalogLOT QTY DESCRIPTION
328 1 CHUCK, BULLARD, 34" dia. 4-jaw (spiral drive)
329 1 CHUCK, WARNER & SWASEY A-15, 24" dia. 3-jaw, 9-1/2" hole, 2-piece jaws (no top jaws),
330 1 CHUCK, CUSHMAN A-15, 21" dia. 4-jaw, 6-1/4" hole, 2-piece jaws
331 1 CHUCK, FLAT BUCK, 24" dia. 4-jaw, 8" hole, 2-piece jaws
332 1 FLAT CHUCK, BISON, 25" dia. 4-jaw, 6-1/4" hole, solid rev jaws
333 1 FLAT CHUCK, CUSHMAN, 26" dia. 4-jaw, 12-1/2" hole, solid rev. jaws
334 1 PALLET RACK SECTION, 10 ht. x 9 W. x 3-1/2 dp
335 1 CHUCK, SPECIALTY
336 1 CHUCK, SPECIALTY
337 1 COMBINATION/INDEPENDENT CHUCK, GIDDINGS & LEWIS, 42" dia. 4-jaw
338 1 POWER CHUCK, BULLARD, 46" dia. 3-jaw
339 1 VTL POWER CHUCK, 42" dia. 3-jaw
340 1 CHUCK, BULLARD, 42" dia. 4-jaw
341 1 POWER CHUCK, SMW, 31" dia. 3-jaw, KNC S800-160 (no master jaws)
342 1 CHUCK, CUSHMAN A-20, 32" dia. 4-jaw, 12-1/2" hole, 2-piece serrated (screws bad, no jaws)
343 1 FLAT CHUCK, CUSHMAN, 32" dia. 4-jaw, 16" hole, 2-piece jaws
344 1 CHUCK, BULLARD, 34" dia. 4-jaw (spiral drive) ,
345 1 POWER CHUCK, WOODWORTH UNIVERSAL BALL-LOK A-20, 32" dia. 3-jaw
345A 1 PALLET RACK SECTION, 10' ht. x 18'W. x 3-1/2' dp.
345B 1 PALLET RACK SECTION, 10' ht. x 18'W. x 3-1/2' dp.
345C 1 ROTARY INDEX TABLE, GRAHAM 40", Mdl. 36-350-S, 30" cross travel, S/N 12115
346 1 CHUCK, 28" dia. 3-jaw
347 1 FLAT CHUCK, CUSHMAN, 32" dia. 4-jaw, 16" hole, 2-piece jaws
348 1 COMBINATION/INDEPENDENT CHUCK, GIDDINGS & LEWIS, 42" dia. 4-jaw
349 1 VTL CHUCK, 42" dia. 4-jaw (parts missing)
350 1 VTL CHUCK, 48" dia. 4-jaw (parts missing)
350A 1 MANUAL ROTARY TABLE, GIDDINGS & LEWIS 60" X 60", (6) T-slots (1" wide, 10" cntr. line), 12" tbl.
height, 360 deg. rotation, 1/2 deg. increments, 5,600 lbs., S/N A2340.
351 1 CHUCK, CUSHMAN D-6, 18" dia. 4-jaw, 4" hole, solid rev jaws
352 1 POWER CHUCK, CUSHMAN D-8, 21" dia. 3-jaw, 2-piece jaws (no top jaws)
353 1 CHUCK, 24" dia. 3-jaw
354 1 POWER CHUCK, CUSHMAN A-15, 21" dia. 3-jaw, 2-piece jaws (no top jaws)
355 1 POWER WRENCH CHUCK, WARNER & SWASEY A-11, 21" dia. 3-jaw, 6-1/4" hole, 2-piece jaws
356 1 FLAT CHUCK, SCA, 18" dia. 3-jaw, 4" hole, solid jaws
357 1 FLAT INDEPENDENT CHUCK, CUSHMAN, 21" dia. 3-jaw, 4-1/2" hole, 2-piece jaws
358 1 CHUCK, 18" dia. 3-jaw
359 1 CHUCK, 18" dia. 3-jaw
360 1 CHUCK, 18" dia. 3-jaw
361 1 FLAT CHUCK, 20" dia. 3-jaw, 7-1/2" hole, 2-piece jaws
361A LOT (4) H.D. BORING MILL JAWS
362 1 CHUCK, 20" dia. 4-jaw
362A 1 FACING HEAD, 24", 7" hole
Page 15
HMT Final Auction CatalogLOT QTY DESCRIPTION
363 1 POWER WRENCH CHUCK, CUSHMAN B-15, 18" dia. 3-jaw, 6-3/4" hole, 2-piece jaws (no top jaws)
364 1 CHUCK, 16" dia. 3-jaw
365 1 FLAT POWER CHUCK, SKINNER-HORTON, 18" dia. 3-jaw, 2-piece jaws
366 1 FLAT POWER CHUCK, 18" dia. 3-jaw, 2-piece jaws
367 1 CHUCK, L-2, 20" dia. 4-jaw, 4-1/4" hole, solid rev jaws
368 1 CHUCK, 18" dia. 4-jaw
369 1 FLAT CHUCK, 32" dia. 4-jaw, 7-3/4" hole, solid rev jaws
370 1 CHUCK, SPECIALTY
371 1 NC ROTARY TABLE, HIGH PERFORMANCE MACHINE CO. 18", 18" tbl. dia., (4) T-slots, horiz. or
vert. pos., 14" (horiz.) base bottom to tbl. top, 10" (vert.) base bottom to tbl. cntr., Gould servo mtr., 37" L-
R x 20" F-B x 14" high, S/N 52268.
372 1 NC ROTARY TABLE, PRODUCTO 36", Mdl. 874-23, 36" tbl. dia., (8) T-slots, 4" tbl. over hang from
base, 4 RPM max. spd., 12" bottom of base to tbl. top, 46" L-R x 36" F-B x 12" height, S/N 0130 (Missing
servo motor).
373 1 CHUCK, 48" dia. 3-jaw
374 1 CHUCK, SPECIALTY
375 1 CHUCK, 36" dia. 3-jaw
376 1 FLAT CHUCK, CUSHMAN, 28" dia. 3-jaw, 12-1/2" hole, 2-piece jaws
377 1 ROTARY TABLE
378 1 ROTARY TABLE
378A 1 MAN. ROTARY TABLE, GIDDINGS & LEWIS 48", 6 T-slots on 7-1/2" centers, 3/4"W. at top, 12" table
ht., 360 deg. in 1/2 deg. Increments
379 1 MANUAL CHUCK, TITAN, 57" dia. 4-jaw
380 1 ROTARY TABLE
380A LOT MAGNETIC TABLES (2), 24" X 60"
380B LOT MAGNETIC TABLES (2), 36" X 36"
380C 1 MAGNETIC TABLE (1), 10" X 72", L.W. Chuck Co. (Toledo, OH)
381 1 POWER ROTARY TABLE, CINCINNATI GILBERT 36", 4 T-slots on 8-1/2" centers, 10" table height, 1
deg. Scale, 3/4 HP, forward/reverse switch, one shot lube
382 1 VALVE INDEXING CHUCK
383 1 4TH AXIS ROTARY TABLE, TROYKE 20", Mdl. NC20b, 16" 3-jaw chuck, S/N 3944-10.
384 1 4TH AXIS ROTARY TABLE, TROYKE 20", Mdl. NC20b, 16" 3-jaw chuck, S/N N/A.
385 LOT SET OF (4) H.D. BORING MILL JAWS
386 1 ROTARY INDEXER, 20"
387 1 AIRLIFT ROTARY TABLE, CINCINNATI GILBERT 36" X 36", 4 T-slots on 8-1/2" centers, 11-1/4" table
height, 360 deg. In 1 deg. Increments
387A 1 PALLET RACK SECTION, 10' ht. x 45'W. x 3-1/2' dp.
387B 1 CHUCK, 18" dia. 3-jaw
388 1 CHUCK, 18" dia. 3-jaw
389 1 CHUCK, 18" dia. 3-jaw
Page 16
HMT Final Auction CatalogLOT QTY DESCRIPTION
390 1 CHUCK, 18" dia. 3-jaw
391 1 T-SLOTTED CHUCK, 24"
392 1 CABINET SYSTEM, NU-ERA, 10-drawer, w/contents
393 1 CABINET SYSTEM, NU-ERA, 10-drawer, w/contents
394 LOT MISC. CONTENTS (on one shelf)
395 1 FACING HEAD, GIDDINGS & LEWIS 30"
396 1 FACING HEAD, GIDDINGS & LEWIS 26"
397 1 FLAT CHUCK, BISON, 25" dia. 3-jaw, 10" hole, 2-piece jaws
398 1 CABINET SYSTEM, NU-ERA, 10-drawer, w/contents
399 1 CABINET, 11-drawer, w/contents
399A LOT (2) BUICK MOTORS, w/contents of shelves
400 1 CABINET, VIDMAR, 10-drawer, w/contents
401 1 CABINET, NU-ERA, 10-drawer, w/electrical supplies
402 1 CABINET, NU-ERA, 10-drawer, w/electrical supplies
403 1 CABINET, NU-ERA, 10-drawer, w/electrical supplies
404 1 CABINET, NU-ERA, 10-drawer, w/electrical supplies
405 LOT CAT-50 TOOLING (on one cart)
406 LOT TAPS (on one pallet)
407 1 VERTICAL MILLING MACHINE, VANGUARD MDL. 7-VSLB
408 1 ENGINE LATHE, NARDINI 15" X 60", Mdl. ND1560E, 16" sw. over bed, 10" sw. over crosslide, 60"
btwn. cntrs., spds.: 25–2,000 RPM, 2" spndl. hole, threading, 7-1/2 HP, 12" 3-jaw chuck, thread dial,
tlstk., chip pan, coolant pump and piping, hardways, S/N N/A.
409 1 SURFACE GRINDER, VANGUARD 10" X 20", Mdl. GMY250
410 LOT (3) SHOP CABINETS, w/contents
411 1 CABINET, VIDMAR, 9-drawer, w/taps
418 1 ROLL GRINDER, MESTA 60" X 288" TRAVELING WHEEL TYPE, 40 HP grndng. spndl. mtr.,
520–1,040 RPM, 13" tlstk. quill dia., 26'-7" whl. head trvl. (L-R), 28" trvl. in-out, (2) 28" work rests, (2) 18"
work rests, 5" wide whl., ball screw on whl. head in-feed, taper grndng., pwr. tlstk., pwr. tlstk. quill,
coolant sys., solid state pwr. supply, concave/convex crowning, pendant at oper. pltfrm, spare int. spndl.
mtr., S/N 101.
419 1 TABLE TYPE HORIZONTAL BORING MILL, IKEGAI 4.9", Mdl. DA2125T, 4.9" spndl., No. 6 MT, spds.:
10–1,000 RPM, 47" x 56" rotation tbl., 60" tbl. cross trvl., 60" tbl. in/out trvl. w/outboard, 48" headstock
vert. trvl., 15 HP, 29.5" facing head, pendant, outboard suppt., outriggers, right angle head, spndl. suppt.,
Newall 3-axis D.R.O., No. 45 quick change tooling adapter, S/N 16927A.
420 1 RADIAL DRILL, ODESSA 10'-27.5", Mdl. 2A587, 3.94" max. drill cap., 19.8"–124" column face to spndl.
center, 16.9"–98.4" spndl. nose to base, No. 50 spndl. taper, 24.8" quill trvl., 104" drill head horiz. trvl.,
59" arm vert. trvl., 360 deg. arm swvl., (24) spndl. spds.: 8–1,600 RPM, 14.6 HP mtr., pwr. drawbar, box
tbl., S/N 284.
Page 17
HMT Final Auction CatalogLOT QTY DESCRIPTION
421 1 RADIAL DRILL, ODESSA 10'-27.5", Mdl. 2A587, 3.94" max. drill cap., 19.8"–124" column face to spndl.
center, 16.9"–98.4" spndl. nose to base, No. 50 spndl. taper, 24.8" quill trvl., 104" drill head horiz. trvl.,
59" arm vert. trvl., 360 deg. arm swvl., (24) spndl. spds.: 8–1,600 RPM, 14.6 HP mtr., pwr. drawbar, box
tbl., S/N 283.
422 1 RADIAL DRILL, CINCINNATI BICKFORD 6'-19" TRACK TYPE, spds.: 8–1,000 RPM, (18) spndl. fds.:
0.004–0.125 IPR, 8, 11-1/2, 14, 18, 20 and 27 TPI tap leads, No. MT, 67" x 104" trvlng. base, 20 HP,
pwr. elev., pwr. clamp, pwr. head trvl., pwr. traverse to base, S/N 6E143.
423 1 RADIAL DRILL, CARLTON 6'-19", drls to ctr of 144" cir., 19" col. dia., (36) spdl. spds: 12-1200 RPM,
(18) fds: .004"-125", No. 6 MT, 8, 10, 11, 13 & 16 TPI tap leads, 13-1/4"-72" col. face to spdl. crt., 27” -
85-3/4" spdl. rad., 50" x 77" base, 10" base ht., 20 HP, pwr. elev., pwr. clamp, pwr. hd trav., S/N 4A4701
424 1 RADIAL DRILL, CARLTON 10'-26", Mdl. 5A, 36" extra height, drills to cntr. of 240" cir., 26" column dia.,
(36) spndl. spds.: 12–1,200 RPM, No. 6 MT taper, 8, 11-1/2, 14 and 18, TPI tap leads, 24" vert. spndl.
trvl., 16-1/2"–120" spndl. cntr. to column face, 20-1/2"–136" spndl. to base (36" extra), no base at pres.,
25 HP, pwr. elev., pwr. clamp, pwr. head trav., S/N 5A3572.
425 1 ENGINE LATHE, NILES 110" X 348", 110" sw. over ways, 102" over saddle wings, 90" over crosslide,
98" max. turn dia., 348" btwn. cntrs., 20 T. load, spndl. spds.: 1.5–80.1 RPM, 7" tlstk. dia., 72" 4-jaw
chuck, 50 HP, hard repl. ways, new leadscrew, rapids, threading, 77" sq. faceplate, 92" tlstk. faceplate,
steadyrest, S/N 22590.
426 1 ROTARY SURFACE GRINDER, BLANCHARD 84", Mdl. 42-84, 84" tbl., 72" dia. mag. chuck, 86" sw.,
18" under new whl., 42" whl., 360 RPM whl. spd., 100 HP, hard bedways, auto. lube, splash guard, whl.
dresser, pendant ctrl., S/N 11758.
427 1 VERTICAL BORING MILL, MORANDO 67", Mdl. VS17, 67" tbl. w/(4) boring mill jaws, 75" swing, 74"
under rail, 170 RPM, 65 HP, (2) swivel ram heads, side head, coolant, rapids, pwr. rail elevation, pwr.
clamp, pendant, upgraded electric., lft. ram equipped w/grndng. spndl. and added fds. w/grndng. spndl.
ctrls. on pendant, S/N 05226.
428 1 ENGINE LATHE, LEBLOND 30" X 24', 30-1/2" sw. over bed, 19-1/2" over comp. rest slide, 288" btwn.
cntrs., (16) spndl. spds.: 6.5–400 RPM, 2-3/16" spndl. hole, 3/8 to 46 TPI, 20 HP, 24" 4-jaw chuck, taper
attach., rapids, chip pan bed, coolant pump, thread dial, quick change toolpost, S/N NI821.
429 1 SLIDING GAP BED ENGINE LATHE, LEBLOND 30"/60" X 108"/180" HEAVY DUTY, 30" sw. over
bed, 60" over gap, 19" over cross slide, 108" btwn. cntrs. (gap closed), 180" gap open, (36) spndl. spds.:
6–625 RPM 2-3/16" spndl. hole, 3/8 to 46 TPI, 20 HP, sliding bed design, 24" 4-jaw chuck, taper attach.,
(2) steadyrests, tlstk., thread dial, rapids, S/N NI1355.
430 1 ENGINE LATHE, MONARCH 45" X 240", Mdl. 2516-35, Series 81, 45" sw., 35" sw. over slide, 240"
btwn. cntrs., 3-1/16" spndl. hole, spndl. spds.: 10–1,250 RPM, 48 feeds, 0.003 to 0.1683 IPR, (48)
threads, 1/2 to 28 TPI, 5-3/4" tlstk. spndl. dia., 10" trvl., No. 6 MT, 22" bed width, 30 HP, 4-way pwr.
rapids, inch/metric threading, 4-way toolpost, chip pan, S/N 52747.
431 1 ENGINE LATHE, MONARCH 34" X 240", Mdl. 2516-25, Series 613, 34" sw., 25" sw. over slide, 240"
btwn. cntrs., 2-1/16" spndl. hole, D-1-8" Camlock, spndl. spds.: 12–1,500 RPM, (66) fds.: 0.0022–0.1366
IPR, (66) threads, 1/2 to 30 TPI, 4-1/2" tlstk. spndl. dia., 9" trvl., 19-1/2" bed width, 25 HP, 4-way pwr.
rapids, inch/metric threading, 4-way toolpost, chip pans, S/N 52733.
Page 18
HMT Final Auction CatalogLOT QTY DESCRIPTION
432 1 HYDRAULIC TUBE BENDER, COAST 14", clockwise bend rot., 14 IPS Sched. 40 bend cap., 12 IPS
Sched. 80 bend cap., 0–195 deg. bends, 0.57 RPM bend spd., 100 HP, 3,000 PSI max. pressure, Accu-
Bend digital ctrl., oper. console, misc. tooling inc., mach. disassembled, S/N 135.
432A LOT BENDER TOOLING (FOR COAST BENDER): 5" dia. 180 deg. bend die 18"/20" radius, 6.75"–7" dia.
180 deg. bend die 18" radius, 7.5" dia. 180 deg. bend die 30"/32" radius, 9" dia. 180 deg. bend die 36"
radius.
433 1 SURFACE GRINDER, MATTISON 68" X 320" PLANER TYPE, horiz. spndl., recipr. tbl., 68" x 300" tbl.
work surf., 320" tbl. trvl., 84" btwn. housings., 60" under whl., 20" x 6" grdng. whl. cap., 55,000 lb. tbl.
load, 0–100 FPM tbl. spds., 30 HP, EM chucks, pwr. clamp, pendant ctrl., S/N PG-22.
434 1 ROLL LATHE, MESTA 90" X 58' HEAVY DUTY, 90" sw. over bed, 68" sw. over carriage, 58' btwn.
cntrs., (21) spndl. spds.: 0.53–27 RPM, 84" chuck w/(4) ext. HD boring mill jaws, 86" wide 3-shear bed,
(2) carriages w/AC drives and pendant ctrls., 12" HD tlstk. quill, 100 HP, (2) HD babbitt type steady rests,
(2) HD roller type steady rests, dig. sp. ind. for hdstk., S/N N/A.
435 1 ROTARY SURFACE GRINDER, BLANCHARD 84", Mdl. 42-72, 72" mag. chuck tbl., 84" sw., 18" under
whl., 42" whl., 360 RPM whl. spd., 75 HP, pwr. elev., whl. dresser, splash guards, pendant, S/N N/A.
436 1 CNC TABLE TYPE HORIZONTAL BORING MILL, GIDDINGS & LEWIS 5", Mdl. PC50, G&l 800M
pendant mtd. CNC ctrl., 5" spndl. dia., No. 50 spndl. taper, spndl. spds.: 25–1,120 RPM, 48" x 96" tbl.,
36" spndl. trvl. (Z), 96" tbl. cross trvl. (X), 72" vert. headstock trvl. (Y), 54" tbl. long trvl. w/o suppt. (W),
60,000 lb. tbl. load, 207" saddle length, 84" bed length, 25 HP, pwr. drawbar, double outrigger suppts.,
auto. lube, S/N 445-38-79.
436A 1 CNC ROTARY TABLE, DEVLIEG 40" X 50", 7 T-slots on 5" centers, 19" tbl. Ht., HT, S/N ES 3089
16PS
437 1 ROTARY SURFACE GRINDER, BLANCHARD 96", Mdl. 48-96, 96" dia. mag. chuck, 108" sw., 40"
under whl., 48" dia. seg. whl., 150 HP, dry base const., whl. dresser, splash guards, neutrifier, S/N
10763.
437A 1 COOLANT FILTRATION SYSTEM, POLYCLON MDL. W400-2000, 400 GPM, 2,000 gal. tank, (20)
Whirlstream Hydroclone filters, 43" inlet height, 53" under swarf discharge chute, chain type swarf drag
out sys., 20 HP main filter pump, 10 HP clean pump, S/N 4865.
438 1 FLOOR TYPE HORIZONTAL BORING MILL, GIDDINGS & LEWIS 8", Mdl. 780F, 8" main spndl., No. 7
MT, 72" spndl. trvl., 96" headstock vert. trvl., 44" column horiz. trvl., horiz. trvl., 246"L x 84"W runway, 50
HP, operator’s platform, S/N 9057.
439 1 FLOOR TYPE HORIZONTAL BORING MILL, GIDDINGS & LEWIS 8", Mdl. 780F, 8" main spndl., No. 7
MT, 72" spndl. trvl., 144" headstock vert. trvl., 240" column horz. trvl., 364"L x 84"W runway, 50 HP,
operator’s platform, S/N N/A.
440 1 FLOOR TYPE HORIZONTAL BORING MILL, GIDDINGS & LEWIS 7", Mdl. 570F, 7" main spndl. dia.,
No. 7 MT, 60" spndl. longitudinal trvl., spds.: 1.6–300 RPM, fds.: 0.005–0.250 IPR, 24"–140" top of
runway to c/l spndl., 2-1/2" high-spd. spndl. dia., No. 4 MT taper, 15" spndl. long trvl., spds.: 6–1,200
RPM, fds.: 0.002–0.125 IPR, 36"–152" top of runway to c/l spndl., 120 IPM rapids, 116" headstock vert.
trvl., 240" column horiz. trvl., updated electrics and ctrls., operator’s platform, new lube pumps, S/N N/A.
440A LOT BORING BARS, 6" dia.
Page 19
HMT Final Auction CatalogLOT QTY DESCRIPTION
441 1 FLOOR TYPE HORIZONTAL BORING MILL, SHIBAURA (TOSHIBA) 5.12", Mdl. BF-13A, 5.12" spndl.,
No. 50 taper, spds.: 4–800 RPM, 35.4" spndl. trvl., 7.09" milling spndl. ram dia., 21.65" milling spndl. ram
trvl., 234" horiz. column trvl., 98" vert. head trvl., 224" overall height, 25 HP, pendant, Sony 3-axis
D.R.O., pwr. drawbar, chip conveyor, operator’s platform and ladder, hard bed and column ways, S/N
211.
442 1 HORIZONTAL BORING MILL, GIDDINGS & LEWIS FRASER 4", Mdl. 340T
442A 1 FACING MACHINE, FORNEY MDL. 36, 48" vert. head trvl., 36" cross trvl., 19" head in/out trvl., (6)
spds.: 33, 38, 46, 66, 76 and 92 RPM, (6) fds.: .00176, .00356, .00530, .00898, .01797 and .02690,
20/10 HP 2-spd. mtr.
443 1 VERTICAL BORING MILL, BULLARD DYNATROL 86", 4-jaw manual chuck, 98" swing, 84" under rail,
74" rail adj., (20) tbl. spds.: 3.2–120 RPM, fds.: 0.001–0.250 IPR, 60" L.H. and R.H. vert. ram trvls., 100
HP, R.H. ram w/threading (rebuilt 2011), pwr. rail binders, rapids, pendant, S/N 33497.
444 1 FLOOR TYPE HORIZONTAL BORING MILL, GIDDINGS & LEWIS 6", Mdl. 460F, 6" spndl., No. 7 MT,
48" spndl. trvl., spds.: 3–800 RPM, 144" column trvl. on runway, 120" headstock vert. trvl. on column,
220"L x 60"W runway, 30 HP, hard bedways, operator’s platform, S/N 200-6-57.
444A 1 POWER ROTARY TABLE, GIDDINGS & LEWIS 120" X 120", infeed, 50 T. tbl. load, (9) T-slots, 48" tbl.
height, 144" runway length, 48" tbl. trvl. on bed, 84" bed width, 1/2 deg. graduations, 10 HP AC feed and
rapid traverse., hand crank for fine feed and adj., portable pushbutton-station, S/N N/A.
445 1 STEADYREST
446 1 STEADYREST
447 1 STEADYREST
448 1 STEADYREST
449 1 STEADYREST
450 1 STEADYREST
451 1 FACING HEAD, GIDDINGS & LEWIS 60", Type 60" CFFH, 60" head dia., 34-tool slide cross trvl., 94"
max. facing dia., 50 RPM, 0.003 to 0.039 IPR feeds, 3,000 lbs.
452 1 POWER WRENCH CHUCK, WARNER & SWASEY A-15, 24" dia. 3-jaw, 9-1/4" hole, 2-piece jaws
458 1 OVERHEAD BRIDGE CRANE, P&H 150/50 T. CAP., dbl. girder, 150 T. main/50 T. aux. cap., 86' span,
53' lift height, 7'-3" min. dist. btwn. hooks, 42" dia. x 126" long main hoist drum, 125 HP main mtr., 75"
center–center of whls., lft. S/N C14311/C18851.
459 1 HYDRAULIC ROUGH TERRAIN MOBILE CRANE, GROVE 50 T. CAP., 3-sect. hyd. boom, 50 T. @ 10
ft. cap., 34 to 84 ft. boom length, 150" whl. base, double box beam and jack outriggers, 23'-3" turning cir.
(4-whl. steer), Caterpillar 3208 diesel engine, 4-whl. drive, 4-whl. steer, encl. cab, S/N 44625.
460 1 OVERHEAD BRIDGE CRANE, LANDEL 30 T. CAP., dbl. girder, 57'-0" bridge span, 36'-0" lift height,
150 FPM bridge spd., 50 FPM trolley spd., 11 FPM hoist spd., 12'-3" end truck whl. base, 6'-8" trolley
whl. base, 25 HP hoist, 7-1/2 HP bridge, 2 HP trolley, S/N A361.
461 1 HYDRAULIC MOBILE CRANE, GALION 15 T. CAP., Mdl. 150A, 4-section power boom, 15 T. @ 10'
rated cap., 60' boom length, 360 deg. boom rot., pneu. tires, 136" lowered height, GM diesel engine,
outriggers, S/N 1404-3033.
462 1 FREE STANDING JIB CRANE, HARRINGTON 2 T. CAP., 14' boom, 14' lift ht., hoist, 7 FPM lift spd.,
40 FPM trolley spd., 1.2 HP, pendant, S/N 00089545
463 1 FREE STANDING JIB CRANE, GAFFEY 1 T. CAP., 8' boom, 8' high
Page 20
HMT Final Auction CatalogLOT QTY DESCRIPTION
464 1 FREE STANDING JIB CRANE, HANDLING SYSTEMS 1 T. CAP., 14' boom, 12' high
465 1 FREE STANDING JIB CRANE, DAYTON 1/2 T. CAP., 13' boom, 13' high
466 1 FREE STANDING JIB CRANE, 1/2 T. CAP., 8' boom, 8' high
467 1 FREE STANDING JIB CRANE, 1/4 T. CAP., 7' boom, 9' high
468 1 FREE STANDING JIB CRANE, 1/4 T. CAP., 7' boom, 9' high
469 1 FREE STANDING JIB CRANE, GORBEL 1/8 T. CAP., 8' boom, 8' high
470 1 FREE STANDING JIB CRANE, GORBEL 1/8 T. CAP., 7' boom, 7' high
471 1 BOOM LIFT, TAYLOR 30,000 LB. CAP., 80"L boom, 2-stage mast, 41"W boom, 144" lowered height,
pneu. rear tires, hard front tires, dual front axle, gas engine, S/N N/A.
472 1 AERIAL WORK PLATFORM, GROVE MDL. AMZ66, 35" x 60" platform, 60' height, 500 lb. cap.,
articulating telescopic boom, 15" x 19.5" tires, 3.5 RPM spd., 101" lowered height, Deutz diesel engine, 2-
whl. drive, 4-whl. steer, hyd. pltfrm. rot., rough terrain tires, side oper. ctrl. station, pltfrm. oper. ctrl.
station, foot pedal, S/N 24850.
473 1 ELECTRIC FORKLIFT, TCM 3,650 LB. CAP., Mdl. FCB20E3, 3,650 lbs. @ 24" L.C, 189" lift height, 80"
lowered height, 42" fork length, 8"–36" fork spacing, 3-stage mast, 36v sys., hard tires, overhead guard,
fork guard, side shift, battery charger, S/N A72F00493.
474 1 FORKLIFT, TOYOTA 3,000 LB. CAP., Mdl. 42-3FGC15, 3,000 lbs. @ 24" L.C., 130" max. lift height, 42"
fork length, 82" lowered height, 8"–32" fork spacing, 2-stage mast, fork guard, hard tires, LP gas,
overhead guard, S/N 403FGC15-10524.
475 1 ELECTRIC CRANE MAGNET, NATIONAL 58"
476 1 ELECTRIC CRANE MAGNET, NATIONAL 18"
477 1 VERTICAL TURRET LATHE, BULLARD DYNATROL 36", 39" swing w/sidehead, 48" swing w/o
sidehead, 54" under rail, 44" rail adj., (20) tbl. spds.: 13–468 RPM, 26" vert. turret trvl., 43" horiz. turret
trvl., 52.75" vert. sidehead trvl., 24" horiz. sidehead trvl., 4-pos. turret, 50 HP, S/N 30995 (Parts
Machine).
478 1 VERTICAL TURRET LATHE, BULLARD DYNATROL 36", 36" tbl. w/4-jaw pwr. chuck, 39" swing
w/sidehead, 48" swing w/o sidehead, 30" under rail, 20" rail adj., (20) tbl. spds.: 13–468 RPM, 26" vert.
turret trvl., 43.75" horiz. turret trvl., 28.75" vert. sidehead trvl., 23.75" horiz. sidehead trvl., 50 HP, 5-pos.
turret, 4-pos. sidehead, pendant, S/N 31639 (Parts Machine).
478A 1 FLOOR PLATE, 8'-6" x 15' x 12", (5) T-slots on 19-1/2" cntrs., mntd. on (6) support legs, 60" height, S/N
N/A.
479 1 BLAST ROOM, SCHMIDT, 12' x 12' x 12'
480 1 SHIPPING CONTAINER, 40', w/electrical parts
481 1 SHIPPING CONTAINER, 40', w/electrical parts
482 1 SHIPPING CONTAINER, 40'
483 1 SHIPPING CONTAINER, 40'
483A LOT (3) OPEN TOP CONTAINERS, 40'
483B 1 DOUBLE DROP FOLDING NECK TRAILER, open top
484 1 MAG. PARTICLE INSPECTION UNIT, CUSTOM 6,000 AMP, M-530 pwr. sply, AC or HWDC current, 17
volts output, inf. vari. current ctrl., 6,000 amps AC/HWDC max. output, 225 amps at 460 volts line
current, H.D. copper lug connectors, set current w/pwr. pak dial or rem. dial, (2) HD castors and (2) swvl.
castors, S/N 781527.
Page 21
HMT Final Auction CatalogLOT QTY DESCRIPTION
485 LOT STACKABLE STORAGE BINS
486 1 VERTICAL TURRET LATHE, BULLARD MAN-AU-TROL 42" (Parts machine, no chuck at present).
487 1 HYDRAULIC STRAIGHTENING PRESS, WATSON-STILLMAN 1,500 T. CAP., trvling. frame, 2-post
gantry style, 60 IPM adv. spd., 3.15 IPM pressing spd., 60 IPM return spd., 186 IPM traverse spd., 19
RPM roller, 4.5 FPM bending block, 24" ram stroke, 5"–18" work dia. on bending blocks, 18" post dia.,
15" floor to tbl., 13'-1-1/2" max. traverse, 16'-5-1/2" btwn. bending blocks, 35' bed length, dual power
bending blocks, dual power rot., oper. station, hyd. unit, S/N 9852.
488 1 FLOOR PLATE, 8' x 20' x 12", (7) T-slots on 12" cntrs., S/N N/A.
489 1 FLOOR PLATE, 8' x 12' x 12" thk., (12) T-slots on 7-1/2" cntrs., flanged base w/hold-down holes and
threaded jack bolt holes.
490 1 POWER TRANSFER CAR, CRANE MFG. 75 T. CAP., 8' x 13' load platform, LPG engine w/generator.
491 LOT V BLOCKS, GIANT GRAY
492 1 MANUAL FLIP-UP POSITIONING TABLE, MADISON 96" X 96", (2) 48" x 24" bolt-on ext.
492A 1 ANGLE PLATE, 160"W. x 120" ht. x 62" dp.
493 1 FLOOR PLATE, 5 X 10
494 1 FLOOR PLATE, 5 X 10
495 1 FLOOR PLATE, 5 X 10
496 1 FLOOR PLATE, 5 X 10
497 1 SHIPPING CONTAINER CONVERTED TO OFFICE, 20'
498 LOT CAT-50 TOOLING
499 LOT CAT-50 TOOLING
500 LOT CAT-50 TOOLING
501 LOT CAT-50 TOOLING
502 LOT CAT-50 TOOLING
503 LOT CAT-30 & CAT-40 TOOLING
504 LOT CAT-50 TOOLING
505 LOT LEVELING BLOCKS
506 LOT NMTB-50 TOOLING
507 LOT MORSE TAPER SLEEVES (on one pallet)
508 LOT CHUCK COLLETS
508A LOT BORING BAR INSERT HOLDERS, KENLOC
508B LOT TIE-DOWN EQUIPMENT, T-NUTS, CLAMPS, BOLTS
509 LOT CAT-45 TOOLING
510 LOT ALORIS TOOLPOSTS & HOLDERS
511 LOT NMTB-50 TOOLING
511A LOT MORSE TAPER COLLET HOLDERS
511B LOT KOMET & LYNDEX INSERTED DRILLS, 2" to 4"
511C LOT KOMET & LYNDEX INSERTED DRILLS, 1" to 3"
511D LOT CAT-50 HOLDERS & QUICK LOCK EXTENDED BORING HEAD
Page 22
HMT Final Auction CatalogLOT QTY DESCRIPTION
512 LOT CAT-50 HOLDERS w/QUICK CHAIN EXTENSION & KAISER BORING HEAD
513 LOT CAT-40 TOOLHOLDERS
514 LOT MORSE TAPER TOOLING
515 LOT CAT-50 TOOLING
516 LOT CAT-50 TOOLING
516A LOT CAT-50 TOOLING, w/EXTENDED FACEMILLS & SPADE DRILLS
516B LOT DRILL BITS
516C LOT TAPS
517 LOT LARGE LOT ROLLER BURNISHING TOOLS
518 LOT NMTB-50 TOOLING
519 LOT NMTB-50 TOOLING
520 LOT (4) H.D. BORING MILL JAWS
520A LOT (3) H.D. FACEPLATES, (2) BULLARD, (4) MISC. JAWS
520B LOT (4) FACEPLATE JAWS
521 LOT NMTB-50 TOOLING
522 LOT NMTB-50 TOOLING
523 LOT NMTB-50 TOOLING
523A LOT CAT-50 TOOLING w/2 - 5" INSERTED DRILLS
524 LOT MORSE TAPER TWIST DRILLS
525 LOT MORSE TAPER TWIST DRILLS
526 LOT MORSE TAPER TWIST DRILLS
527 LOT MORSE TAPER TWIST DRILLS
528 LOT TAPER SHANK DRILL BITS
529 LOT TAPER SHANK DRILL BITS
530 LOT TAPER SHANK DRILL BITS
531 LOT TAPER SHANK DRILL BITS
532 LOT TAPER SHANK DRILL BITS
533 LOT TAPER SHANK DRILL BITS
534 LOT BORING BARS
535 LOT BORING BARS
536 LOT BORING BARS
537 LOT BORING BARS
538 LOT BORING BARS
539 LOT BORING BARS
540 LOT BORING BARS
541 LOT BORING BARS
Page 23
HMT Final Auction CatalogLOT QTY DESCRIPTION
542 LOT BORING BARS
543 LOT TAPER SHANK DRILL BITS
544 LOT TAPER SHANK DRILL BITS
545 LOT TAPER SHANK DRILL BITS
546 LOT TAPER SHANK DRILL BITS
547 LOT TAPER SHANK DRILL BITS
548 LOT TAPER SHANK DRILL BITS
549 LOT TAPER SHANK DRILL BITS
550 LOT TAPER SHANK DRILL BITS
551 LOT TAPER SHANK DRILL BITS
552 LOT TAPER SHANK DRILL BITS
553 LOT TAPER SHANK DRILL BITS
554 LOT TAPER SHANK DRILL BITS
555 LOT DRILL BITS
556 LOT DRILL BITS
557 LOT DRILL BITS
558 LOT DRILL BITS
559 LOT DRILL BITS
560 LOT DRILL BITS
561 LOT DRILL BITS
562 LOT DRILL BITS
563 LOT LATHE TOOLHOLDERS
564 1 LEVELING BLOCK
565 LOT NMTB-50 TOOLHOLDERS
566 LOT NMTB-50 TOOLHOLDERS
567 LOT BORING BARS
568 LOT BORING BARS
569 LOT TOOLHOLDERS
570 LOT TOOLHOLDERS
571 LOT TOOLHOLDERS
572 LOT BORING BARS
573 1 TOOLPOST GRINDER, DUMORE (in box)
574 1 TOOLPOST GRINDER, DUMORE (in box)
575 1 TOOLPOST GRINDER, DUMORE (in box)
576 LOT CAT-50 TOOLING
577 LOT CAT-50 TOOLING
Page 24
HMT Final Auction CatalogLOT QTY DESCRIPTION
578 LOT CAT-50 TOOLING
579 LOT CAT-50 TOOLING
580 LOT CAT-50 TOOLING
581 LOT CAT-50 TOOLING
582 LOT CAT-50 TOOLING
583 LOT CAT-50 TOOLING
585 LOT CAT-50 TOOLING
586 LOT CAT-50 TOOLING
587 LOT CAT-50 TOOLING
588 LOT CAT-50 TOOLING
589 LOT CAT-50 TOOLING
590 LOT CAT-50 TOOLING
591 LOT ENDMILLS
592 LOT ENDMILLS
593 LOT ENDMILLS
594 LOT ENDMILLS
595 LOT ENDMILLS
596 LOT ENDMILLS
597 LOT ENDMILLS
598 LOT ENDMILLS
599 LOT CAT-50 TOOLING
600 LOT CAT-50 TOOLING
601 LOT CAT-50 TOOLING
602 LOT CAT-50 TOOLING
603 LOT NMTB-50 TOOLING
604 LOT NMTB-50 TOOLING
605 LOT NMTB-50 TOOLING
606 LOT CAT-50 TOOLING & COLLETS
607 LOT CAT-50 TOOLING & COLLETS
608 LOT CAT-50 TOOLING & COLLETS
609 LOT CAT-50 TOOLING & COLLETS
610 LOT CAT-50 TOOLING & COLLETS
611 LOT CAT-50 TOOLING & COLLETS
612 LOT CAT-50 TOOLING & COLLETS
613 LOT CAT-50 TOOLING & COLLETS
614 LOT CARBIDE ENDMILLS
615 LOT CARBIDE ENDMILLS
616 LOT ENDMILLS
Page 25
HMT Final Auction CatalogLOT QTY DESCRIPTION
617 LOT ENDMILLS
618 LOT ENDMILLS
619 LOT CAT-50 TOOLING
620 LOT CAT-50 TOOLING
621 LOT MAGNETIC BLOCKS
622 1 PRECISION PORTABLE GRINDER, GILMORE MDL. A-1, S/N 262
623 1 HORIZONTAL BORING LATHE CENTER
624 1 MANUAL BORING MILL CONTOUR/SEAT POCKET HEAD
625 1 H.D. ADJUSTABLE BORING HEAD w/50 taper
626 1 PORT. MACH. UNIT, DUMORE NO. 2 VERSA-MILL, TOOL, 6” VERT. TRVL., NO. 3 MT SPDL TPR,
44 TO 450 RPM, 2 HP, HIGH SPD HEAD, UNIV. HEAD, VERSA SHAPER, VERSA GRNDR, MISC.
GRNDNG WHLS, ROLL-AROUND STOR. CAB., S/N 8267-1407
627 LOT ADJUSTABLE BORING HEADS
628 LOT ADJUSTABLE BORING HEADS
629 LOT CAT-50 TEST EQUIPMENT
630 LOT TOOLING (new in box)
631 1 ADJUSTABLE BORING HEAD, WOHLHAUPTER (in box)
632 1 ADJUSTABLE BORING HEAD, WOHLHAUPTER (in box)
633 1 ADJUSTABLE BORING HEAD, WOHLHAUPTER (in box)
633A 1 CHUCK, A2-15, 49" dia. 4-jaw, 11" hole, solid rev jaws (new in box)
635 1 INDEPENDENT CHUCK, D-11, 25" dia. 4-jaw, solid rev jaws (new in box)
636 1 INDEPENDENT CHUCK, D-11, 25" dia. 4-jaw, solid rev jaws (new in box)
637 1 INDEPENDENT CHUCK, D-11, 25" dia. 4-jaw, solid rev jaws (new in box)
638 1 INDEPENDENT CHUCK, D-11, 25" dia. 4-jaw, solid rev jaws (new in box)
639 1 INDEPENDENT CHUCK, D-11, 25" dia. 4-jaw, solid rev jaws (new in box)
640 1 INDEPENDENT CHUCK, D-11, 25" dia. 4-jaw, solid rev jaws (new in box)
641 1 INDEPENDENT CHUCK, D-11, 25" dia. 4-jaw, solid rev jaws (new in box)
642 1 INDEPENDENT CHUCK, D-11, 25" dia. 4-jaw, solid rev jaws (new in box)
643 1 INDEPENDENT CHUCK, D-11, 25" dia. 4-jaw, solid rev jaws (new in box)
644 1 INDEPENDENT CHUCK, D-11, 25" dia. 4-jaw, solid rev jaws (new in box)
645 1 INDEPENDENT CHUCK, D-11, 25" dia. 4-jaw, solid rev jaws (new in box)
646 1 INDEPENDENT CHUCK, D-11, 25" dia. 4-jaw, solid rev jaws (new in box)
647 1 INDEPENDENT CHUCK, D-11, 25" dia. 4-jaw, solid rev jaws (new in box)
647A 1 INDEPENDENT CHUCK, D-11, 25" dia. 4-jaw, solid rev jaws (new in box)
647B 1 INDEPENDENT CHUCK, D-11, 25" dia. 4-jaw, solid rev jaws (new in box)
647C 1 INDEPENDENT CHUCK, D-11, 25" dia. 4-jaw, solid rev jaws (new in box)
647D 1 INDEPENDENT CHUCK, D-11, 25" dia. 4-jaw, solid rev jaws (new in box)
647F 1 INDEPENDENT CHUCK, D-11, 25" dia. 4-jaw, solid rev jaws (new in box)
647G 1 INDEPENDENT CHUCK, D-11, 25" dia. 4-jaw, solid rev jaws (new in box)
647H 1 INDEPENDENT CHUCK, D-11, 25" dia. 4-jaw, solid rev jaws (new in box)
647I 1 INDEPENDENT CHUCK, D-11, 25" dia. 4-jaw, solid rev jaws (new in box)
647J 1 INDEPENDENT CHUCK, D-11, 25" dia. 4-jaw, solid rev jaws (new in box)
648 1 CHUCK, A2-20, 25" dia. 4-jaw, 12-1/2" hole, 2-piece jaws (new in box)
Page 26
HMT Final Auction CatalogLOT QTY DESCRIPTION
649 1 CHUCK, A2-20, 25" dia. 4-jaw, 12-1/2" hole, 2-piece jaws (new in box)
650 1 CHUCK, A2-20, 25" dia. 4-jaw, 12-1/2" hole, 2-piece jaws (new in box)
651 1 HOLLOW SPINDLE CHUCK, 32" dia. 4-jaw, 14" hole
652 1 HOLLOW SPINDLE CHUCK, 32" dia. 4-jaw, 14" hole
653 1 CHUCK, A2-20, 32" dia. 4-jaw, 14" hole, 2-piece jaws (new in box)
654 1 SELF-CENTERING CHUCK, D-11, 20" dia. 3-jaw, 2-piece jaws (new in box)
655 1 SELF-CENTERING CHUCK, D-11, 20" dia. 3-jaw, 2-piece jaws (new in box)
656 1 SELF-CENTERING CHUCK, D-11, 20" dia. 3-jaw, 2-piece jaws (new in box)
657 1 SELF-CENTERING CHUCK, D-11, 20" dia. 3-jaw, 2-piece jaws (new in box)
658 1 SELF-CENTERING CHUCK, D-11, 20" dia. 3-jaw, 2-piece jaws (new in box)
659 1 INDEPENDENT CHUCK, D-11, 32" dia. 4-jaw, solid rev jaws (new in box)
660 1 INDEPENDENT CHUCK, D-11, 32" dia. 4-jaw, solid rev jaws (new in box)
661 1 INDEPENDENT CHUCK, D-11, 32" dia. 4-jaw, solid rev jaws (new in box)
662 1 INDEPENDENT CHUCK, D-11, 32" dia. 4-jaw, solid rev jaws (new in box)
663 1 INDEPENDENT CHUCK, D-11, 32" dia. 4-jaw, solid rev jaws (new in box)
664 1 INDEPENDENT CHUCK, D-11, 32" dia. 4-jaw, solid rev jaws (new in box)
665 1 INDEPENDENT CHUCK, D-11, 32" dia. 4-jaw, solid rev jaws (new in box)
666 1 INDEPENDENT CHUCK, D-11, 32" dia. 4-jaw, solid rev jaws (new in box)
667 1 INDEPENDENT CHUCK, D-11, 32" dia. 4-jaw, solid rev jaws (new in box)
667A 1 INDEPENDENT CHUCK, D-11, 32" dia. 4-jaw, solid rev jaws (new in box)
667B 1 INDEPENDENT CHUCK, D-11, 32" dia. 4-jaw, solid rev jaws (new in box)
667C 1 INDEPENDENT CHUCK, D-11, 32" dia. 4-jaw, solid rev jaws (new in box)
667D 1 INDEPENDENT CHUCK, D-11, 32" dia. 4-jaw, solid rev jaws (new in box)
668 1 INDEPENDENT CHUCK, D-11, 20" dia. 4-jaw, solid rev jaws (new in box)
669 1 INDEPENDENT CHUCK, D-11, 20" dia. 4-jaw, solid rev jaws (new in box)
670 1 INDEPENDENT CHUCK, D-11, 20" dia. 4-jaw, solid rev jaws (new in box)
671 1 INDEPENDENT CHUCK, D-11, 20" dia. 4-jaw, solid rev jaws (new in box)
672 1 INDEPENDENT CHUCK, D-11, 20" dia. 4-jaw, solid rev jaws (new in box)
673 1 INDEPENDENT CHUCK, D-11, 20" dia. 4-jaw, solid rev jaws (new in box)
674 1 INDEPENDENT CHUCK, D-11, 20" dia. 4-jaw, solid rev jaws (new in box)
675 1 INDEPENDENT CHUCK, D-11, 20" dia. 4-jaw, solid rev jaws (new in box)
676 1 INDEPENDENT CHUCK, D-11, 20" dia. 4-jaw, solid rev jaws (new in box)
676A 1 INDEPENDENT CHUCK, D-11, 20" dia. 4-jaw, solid rev jaws (new in box)
676B 1 INDEPENDENT CHUCK, D-11, 20" dia. 4-jaw, solid rev jaws (new in box)
676C 1 INDEPENDENT CHUCK, D-11, 20" dia. 4-jaw, solid rev jaws (new in box)
677 1 SELF-CENTERING CHUCK, D-11, 20" dia. 3-jaw, 2-piece jaws (new in box)
678 1 SELF-CENTERING CHUCK, D-11, 20" dia. 3-jaw, 2-piece jaws (new in box)
Page 27
HMT Final Auction CatalogLOT QTY DESCRIPTION
679 1 SELF-CENTERING CHUCK, D-11, 20" dia. 3-jaw, 2-piece jaws (new in box)
680 1 SELF-CENTERING CHUCK, D-11, 20" dia. 3-jaw, 2-piece jaws (new in box)
681 1 SELF-CENTERING CHUCK, D-11, 20" dia. 3-jaw, 2-piece jaws (new in box)
682 1 SELF-CENTERING CHUCK, D-11, 20" dia. 3-jaw, 2-piece jaws (new in box)
683 1 SELF-CENTERING CHUCK, D-11, 20" dia. 3-jaw, 2-piece jaws (new in box)
684 1 SELF-CENTERING CHUCK, D-11, 20" dia. 3-jaw, 2-piece jaws (new in box)
684A 1 SELF-CENTERING CHUCK, D-11, 20" dia. 3-jaw, 2-piece jaws (new in box)
684B 1 SELF-CENTERING CHUCK, D-11, 20" dia. 3-jaw, 2-piece jaws (new in box)
684C 1 SELF-CENTERING CHUCK, D-11, 20" dia. 3-jaw, 2-piece jaws (new in box)
684D 1 SELF-CENTERING CHUCK, D-11, 20" dia. 3-jaw, 2-piece jaws (new in box)
684F 1 SELF-CENTERING CHUCK, D-11, 20" dia. 3-jaw, 2-piece jaws (new in box)
684G 1 SELF-CENTERING CHUCK, D-11, 20" dia. 3-jaw, 2-piece jaws (new in box)
685 1 INDEPENDENT CHUCK, D-11, 20" dia. 4-jaw, solid rev jaws (new in box)
686 1 INDEPENDENT CHUCK, D-11, 20" dia. 4-jaw, solid rev jaws (new in box)
687 1 INDEPENDENT CHUCK, D-11, 20" dia. 4-jaw, solid rev jaws (new in box)
688 1 INDEPENDENT CHUCK, D-11, 20" dia. 4-jaw, solid rev jaws (new in box)
689 1 INDEPENDENT CHUCK, D-11, 20" dia. 4-jaw, solid rev jaws (new in box)
690 1 INDEPENDENT CHUCK, D-11, 20" dia. 4-jaw, solid rev jaws (new in box)
691 1 INDEPENDENT CHUCK, D-11, 20" dia. 4-jaw, solid rev jaws (new in box)
692 1 INDEPENDENT CHUCK, D-11, 20" dia. 4-jaw, solid rev jaws (new in box)
693 1 INDEPENDENT CHUCK, D-11, 16" dia. 4-jaw, solid rev jaws (new in box)
694 1 INDEPENDENT CHUCK, D-11, 16" dia. 4-jaw, solid rev jaws (new in box)
695 1 INDEPENDENT CHUCK, D-11, 16" dia. 4-jaw, solid rev jaws (new in box)
696 1 INDEPENDENT CHUCK, D-11, 16" dia. 4-jaw, solid rev jaws (new in box)
697 1 INDEPENDENT CHUCK, D-11, 16" dia. 4-jaw, solid rev jaws (new in box)
698 1 INDEPENDENT CHUCK, D-11, 16" dia. 4-jaw, solid rev jaws (new in box)
699 1 INDEPENDENT CHUCK, D-11, 16" dia. 4-jaw, solid rev jaws (new in box)
700 1 INDEPENDENT CHUCK, D-11, 16" dia. 4-jaw, solid rev jaws (new in box)
701 1 INDEPENDENT CHUCK, D-11, 16" dia. 4-jaw, solid rev jaws (new in box)
702 1 INDEPENDENT CHUCK, D-11, 16" dia. 4-jaw, solid rev jaws (new in box)
703 1 INDEPENDENT CHUCK, D-11, 16" dia. 4-jaw, solid rev jaws (new in box)
704 1 INDEPENDENT CHUCK, D-11, 16" dia. 4-jaw, solid rev jaws (new in box)
705 1 INDEPENDENT CHUCK, D-11, 16" dia. 4-jaw, solid rev jaws (new in box)
706 1 INDEPENDENT CHUCK, D-11, 16" dia. 4-jaw, solid rev jaws (new in box)
707 1 INDEPENDENT CHUCK, D-11, 16" dia. 4-jaw, solid rev jaws (new in box)
708 1 INDEPENDENT CHUCK, D-11, 16" dia. 4-jaw, solid rev jaws (new in box)
Page 28
HMT Final Auction CatalogLOT QTY DESCRIPTION
709 1 INDEPENDENT CHUCK, D-11, 16" dia. 4-jaw, solid rev jaws (new in box)
709A 1 INDEPENDENT CHUCK, D-11, 16" dia. 4-jaw, solid rev jaws (new in box)
710 1 INDEPENDENT CHUCK, D-11, 20" dia. 4-jaw, solid rev jaws (new in box)
711 1 INDEPENDENT CHUCK, D-11, 20" dia. 4-jaw, solid rev jaws (new in box)
712 1 INDEPENDENT CHUCK, D-11, 16" dia. 4-jaw, solid rev jaws (new in box)
713 1 CHUCK, A2-8, 12" dia. 4-jaw (new in box)
714 1 INDEPENDENT CHUCK, D-11, 16" dia. 4-jaw, solid rev jaws (new in box)
715 1 INDEPENDENT CHUCK, D-11, 16" dia. 4-jaw, solid rev jaws (new in box)
716 1 FLATBACK SELF-CENTERING CHUCK, 16" dia. 3-jaw (new in box)
717 1 FLATBACK SELF-CENTERING CHUCK, 16" dia. 3-jaw (new in box)
718 1 FLATBACK SELF-CENTERING CHUCK, 16" dia. 3-jaw (new in box)
719 1 FLATBACK SELF-CENTERING CHUCK, 16" dia. 3-jaw (new in box)
720 1 FLATBACK SELF-CENTERING CHUCK, 16" dia. 3-jaw (new in box)
721 1 FLATBACK SELF-CENTERING CHUCK, 12" dia. 3-jaw (new in box)
722 1 FLATBACK SELF-CENTERING CHUCK, 12" dia. 3-jaw (new in box)
723 1 FLATBACK SELF-CENTERING CHUCK, 12" dia. 3-jaw (new in box)
724 1 FLATBACK SELF-CENTERING CHUCK, 12" dia. 3-jaw (new in box)
725 1 FLATBACK SELF-CENTERING CHUCK, 8" dia. 3-jaw (new in box)
726 1 FLATBACK SELF-CENTERING CHUCK, 8" dia. 3-jaw (new in box)
727 1 FLATBACK SELF-CENTERING CHUCK, 8" dia. 3-jaw (new in box)
728 1 FLATBACK SELF-CENTERING CHUCK, 8" dia. 3-jaw (new in box)
729 1 SPIN-LOCK WELDING CHUCK, 16" dia. 3-jaw (new in box)
730 1 SPIN-LOCK WELDING CHUCK, 16" dia. 3-jaw (new in box)
731 1 SPIN-LOCK WELDING CHUCK, 8" dia. 3-jaw (new in box)
732 1 SPIN-LOCK WELDING CHUCK, 8" dia. 3-jaw (new in box)
733 1 SPIN-LOCK WELDING CHUCK, 8" dia. 3-jaw (new in box)
734 1 SPIN-LOCK WELDING CHUCK, 8" dia. 3-jaw (new in box)
735 1 SPIN-LOCK WELDING CHUCK, 8" dia. 3-jaw (new in box)
736 1 SPIN-LOCK WELDING CHUCK, 12" dia. 3-jaw (new in box)
737 1 SPIN-LOCK WELDING CHUCK, 12" dia. 3-jaw (new in box)
738 1 FLATBACK SELF-CENTERING WELDING CHUCK, 12 dia. 4-jaw (new in box)
739 1 FLATBACK SELF-CENTERING WELDING CHUCK, 12 dia. 4-jaw (new in box)
740 1 FLATBACK SELF-CENTERING WELDING CHUCK, 12 dia. 4-jaw (new in box)
741 1 FLATBACK SELF-CENTERING WELDING CHUCK, 12 dia. 4-jaw (new in box)
742 1 FLATBACK SELF-CENTERING WELDING CHUCK, 12 dia. 4-jaw (new in box)
743 1 FACING PLATE
Page 29
HMT Final Auction CatalogLOT QTY DESCRIPTION
744 1 FACING PLATE
745 1 FACING PLATE
745A 1 SPIN-LOCK WELDING CHUCK, 16" dia. 3-jaw (new in box)
745B 1 SPIN-LOCK WELDING CHUCK, 16" dia. 3-jaw (new in box)
745C 1 SPIN-LOCK WELDING CHUCK, 16" dia. 3-jaw (new in box)
745D 1 FLATBACK SELF-CENTERING WELDING CHUCK, 16" dia. 4-jaw, 2-piece jaws (new in box)
745F 1 FLATBACK SELF-CENTERING WELDING CHUCK, 20" dia. 4-jaw, 2-piece jaws (new in box)
745G 1 FLATBACK SELF-CENTERING WELDING CHUCK, 20" dia. 4-jaw, 2-piece jaws (new in box)
745H 1 FLATBACK SELF-CENTERING WELDING CHUCK, 8" dia. 4-jaw, 2-piece jaws (new in box)
745I 1 FLATBACK SELF-CENTERING WELDING CHUCK, 8" dia. 4-jaw, 2-piece jaws (new in box)
745J 1 FLATBACK SELF-CENTERING WELDING CHUCK, 8" dia. 4-jaw, 2-piece jaws (new in box)
745K 1 FLATBACK SELF-CENTERING WELDING CHUCK, 8" dia. 4-jaw, 2-piece jaws (new in box)
745L 1 FLATBACK SELF-CENTERING WELDING CHUCK, 8" dia. 4-jaw, 2-piece jaws (new in box)
745M LOT MISC. CHUCKS (on one pallet)
745N LOT MISC. CHUCKS (on one pallet)
745O LOT MISC. CHUCKS (on one pallet)
745P LOT MISC. CHUCKS (on one pallet)
745Q 1 CHUCK, 32" dia. 4-jaw
746 1 VERTICAL HONE, BARNES MDL. 3010, 10" honing cap., 35" spndl. stroke, 16-1/8" spndl. cntr. to col.
face, (8) spndl. spds., 54–354 RPM, 10–70 FPM recip. spds., 44" x 17" tbl., 10 HP, auto. hone exp., oil
filter sys., dwell timer, Barnes disp. media, S/N NP10456.
747 1 RADIAL DRILL, VANGUARD 6'-17", Mdl. Z3063X20/1, 2.48" max. drill dia., 17"–78" spndl. to column,
15"–63" spndl. nose to tbl., 15" spndl. trvl., No. 5 taper, (16) spndl. spds.: 20–1,600 RPM, 24" x 31" tbl.,
61" spndl. HD trvl., 7.4 HP, S/N 0603033. (Parts missing)
748 1 VERTICAL MILL, VANGUARD 10" X 54", Mdl. 4VS, 10" x 54" tbl., 40" long tbl. trvl., 16-1/2" cross, 16-
1/2" vert., spndl. spds.: 60–4,200 RPM, R-8 taper, 5" quill trvl., 3-3/8" quill dia., fds.: 0.0015, 0.003, 0.006
IPR, 22-3/4" ram trvl., +/-45 deg. B-f HD tilt, +/-90 deg. R-l, 0"–16-1/2" tbl. to spndl., 4"–27" column to
spndl., 3 HP, vari.-spd. hd, pwr. tbl. feeds, 2-axis D.R.O., pwr. drawbar, coolant, box ways, vise, splash
base pan, S/N 61016. (Parts missing)
749 1 TILTING ROTARY TABLE, HOFMANN TRUNION 31.5", 23.6" HT, 0 - 90 DEG. TILT, 1:180 ROT.
GEAR RATIO, 1:90 TILT GEAR RATIO, TILT CLAMP, MAN. TILT, HNDWHL ROT., S/N 8211
749A 1 POWER ROTARY TABLE, PRATT & WHITNEY 50", 12 T-SLOTS, 3/4" WIDTH AT TOP, 10-1/2" TBL
HT, 360 DEG. IN 1 DEG. INCR., FWD & REV., S/N 24919 R
750 1 TABLE TYPE HORIZONTAL BORING MILL, COLLET & ENGLEHARDT 5", Mdl. BFT130, 5-1/8"
spndl., No. 6 MT, spds.: 5.5–800 RPM, 42" spndl. horiz. trvl., 63" x 71" rotation tbl., 65" tbl. cross trvl.,
115" tbl. long trvl., 68" headstock vert. trvl., 17.5 HP, 26" facing head, outriggers, operator’s platform,
S/N D5691.750A 1 BOX TYPE ANGLE PLATE, 24" x 48" x 30"
Page 30
HMT Final Auction CatalogLOT QTY DESCRIPTION
751 1 ENGINE LATHE, LEBLOND 18" X 138", 18.5" sw. over bed, 11.25" sw. over cross slide, 138" btwn.
cntrs., spds.: 15–525 RPM, 1-3/4" spndl. hole, No. 5 MT tlstk., 10 HP, taper attach., steadyrest, chip pan,
S/N N/A.
752 1 ENGINE LATHE, MONARCH 28" X 72", Series 61, 28" sw. over bed, 19" sw. over crosslide, 72" btwn.
cntrs., 1-9/16" spndl. hole, spds.: 24–1,000 RPM, 10 HP, 12" 3-jaw chuck, steadyrest, tlstk., chip pans,
thread dial, S/N 42356.
753 1 TABLE TYPE HORIZONTAL BORING MILL, WOTAN 4", Mdl. B100l, 4" spndl., No. 50 taper, spds.:
14–200 RPM (low) and 250–1,600 RPM (high), 40" x 68" tbl., 60" tbl. cross trvl., 48" headstock vert. trvl.,
15 HP, pendant, outriggers, spndl. suppt., rapids, S/N 52354.
753A LOT BORIING BARS
754 1 CNC TABLE TYPE HORIZONTAL BORING MILL, GIDDINGS & LEWIS 4", Mdl. J65-E4-T, Fanuc 21i-
M CNC ctrl., 4" spndl., No. 50 taper, 30" spndl. trvl., 1,300 RPM, 36" x 62" tbl., 48" tbl. cross trvl., 24"
saddle long trvl., 86" saddle length, 36" headstock trvl., 20 HP, 3-way column, outriggers, pendant, S/N
400-71-65.
755 1 LATHE STEADYREST, OMNIREST, for Warner & Swasey Mdl. 5A
756 1 LATHE STEADYREST, OMNIREST, for Warner & Swasey; Mdl. 5A
756A 1 LATHE STEADYREST, SMW, for Warner & Swasey Mdl. SC-32
757 1 TABLE TYPE HORIZONTAL BORING MILL, CINCINNATI GILBERT 3-1/2", 3-1/2" spdl., No. 5 MT,
(24) spdl. spds: 12-700 RPM, 30" spdl. travel, 48" x 72" table, 60" table cross travel, 48" headstock vert.
travel, 120" bed length, 36" bed width, 10 HP, rapids, S/N 896
758 1 VERTICAL MILL, ASTRO (parts machine)
763 1 RADIAL DRILL, CINCINNATI BICKFORD 6'-17", drills to center of 144" cir., (36) spndl. spds.: 12–1,500
RPM, No. 6 MT spndl. taper, (18) spndl. fds., 23-3/8"–83-5/8" spndl. radius, 11-1/2"–72" spndl. to base,
45" x 76" base, 18" spndl. trvl. in HD, 20 HP, box tbl., pwr. elev., pwr. clamp, pwr. rapids, coolant pump,
S/N 5E675.
764 1 ENGINE LATHE, MONARCH 25" X 192", Series 612, 25" sw. over bed, 16" sw. over rest, 192" btwn.
cntrs., (16) spndl. spds.: 12–1,500 RPM, 2-1/16" spndl. hole, D-1-8" Camlock spndl. nose, fds.:
0.0011–0.0683 IPR, 2 to 120 TPI thread range, 4-1/2" tlstk. spndl. dia., 9" tlstk. spndl. trvl., No. 5 MT
tlstk. spndl., 6" compound rest top slide trvl., 19-1/2" bed width, 30 HP, 18" 4-jaw chuck, taper attach., (2)
steadyrests, thread dial, hard ways, chip pans, coolant pump, S/N 47100.
765 1 ENGINE LATHE, AMERICAN PACEMAKER 32" X 96", 32" sw. over bed, 19-1/2" sw. over cross slide,
96" btwn. cntrs., (27) spndl. spds.: 6–600 RPM 2-3/16" spndl. hole, l-3 spndl. nose, (60) fds.:
0.004–0.240 IPR, (60) threads, 1/2 to 30 TPI, 30 HP, 24" 4-jaw chuck, taper attach., steadyrest, coolant
pump, chip pan bed, thread dial, tlstk., S/N 71116-48.
766 1 TABLE TYPE HORIZONTAL BORING MILL, GIDDINGS & LEWIS 3", Mdl. 300T, 3" spndl., No. 5 MT,
24" spndl. trvl., (36) spndl. spds.: 22–1,600 RPM, 30" x 48" tbl., 36" tbl. cross trvl., 36" headstock vert.
trvl., 10 HP, 30" x 30" rotation tbl., pendant, S/N G-1094.
767 1 HYDRAULIC SURFACE GRINDER, GALLMEYER & LIVINGSTON 8" X 24", Mdl. 35, 8"W x 24"L x
12"H cap., 8" x 24" magnet, 10" x 1" whl. w/2" hole, 12" whl. to tbl., 2,300 and 3,000 RPM spndl., 3 HP,
one-shot lube, coolant pump (no tank), S/N S35-799.
Page 31
HMT Final Auction CatalogLOT QTY DESCRIPTION
772 1 TABLE TYPE HORIZONTAL BORING MILL, SUMMIT 4", Mdl. ADF100, 4" spndl., No. 5 MT, (18)
spndl. spds.: 12.5–1,250 RPM, 27-1/2" spndl. trvl., 43-5/8" x 51-1/2" rotation tbl., 11,000 lb. load, 56" tbl.
cross trvl., 50" headstock vert. trvl., 48" saddle trvl., 15 HP, pendant, outboard suppt., outriggers, S/N
108.
773 1 SADDLE TYPE TURRET LATHE, WARNER & SWASEY 3A SQUARE HEAD, 6-1/4" spndl. hole, A-1-
15 spndl. nose, 40/20 HP, 2-spd. mtr., 18" 3-jaw pwr. chuck, 4-way toolpost, chip pan bed, chuck guard,
coolant, misc. turret tooling, rapids, crossliding rear turret, S/N 1869200.
774 1 HYDRAULIC SURFACE GRINDER, MATTISON 18" X 48", 24" height cap., tbl. feed (vari.), pwr. oper.
whl. head, hyd. whl. cross feed, 20" dia. grndng. whl., 3" face, 15 HP, 18" x 48" EM chuck, splash
guards, S/N 14326.
775 1 RADIAL DRILL, VANGUARD 5'-14", Mdl. Z3050X16, 1.96" max. drill dia., 13"–63" spndl. to column,
12"–48" spndl. nose to tbl., 12" spndl. trvl., No. 5 taper, (16) spndl. spds.: 25–2,000 RPM, 19" x 24" tbl.,
49" spndl. HD trvl., 5.4 HP, S/N 05075063.
776 1 ENGINE LATHE, MONARCH 34" X 60" HEAVY DUTY, Mdl. 32NN, 34.5" sw. over bed, 18" sw. over
crosslide, 60" btwn. cntrs., (16) spndl. spds.: 6–303 RPM, 2-3/16" spndl. hole, D-1-11 spndl. nose, (48)
fds.: 0.006–0.363 IPR, (48) threads, 1 to 56 TPI, 4-7/8" tlstk. spndl. dia., No. 6 MT, 13" tlstk. spndl. trvl.,
31-1/2" bed width, 25 HP, 24" 4-jaw chuck, hard ways, quick change toolpost, Newall 2-axis D.R.O., S/N
31683-K.
777 1 SURFACE GRINDER, GALLMEYER & LIVINGSTON 20" X 144", Mdl. F, 25" under whl., 20" x 6"
grndng. wheel cap., (2) 20" x 60" electromagnetic chucks, 30 HP, neutrofier, pwr. elev., coolant, whl.
dresser, S/N 2020144.
778 1 GAP BED ENGINE LATHE, LEBLOND REGAL 26" X 96", 26" sw. over bed, 18-1/4" swing over slide,
37" sw. in gap, 12-1/4" gap, 96" btwn. cntrs., 2-1/8" spndl. hole, spds.: 27–1,080 RPM, 2 to 112 TPI, 3-
1/8" tlstk. spndl. dia., No. 5 MT, 10 HP, 21" 4-jaw chuck, taper attach., quick change toolpost, steadyrest,
thread dial, chip pans, removable gap blk., S/N 3H661.
779 1 ENGINE LATHE, AXELSON 22" X 150", 22" sw. o/bed, 15" sw. o/slide, 150" btwn. cntrs., 1-9/16" spndl.
hole, D-1-6" spndl., nose, (24) spndl. spds., 13–1,577 RPM, (54) feeds, (54) threads, 10-5/8" slide trvl., 4-
3/4" comp. rest trvl., 2-7/8" tstk. spndl. dia., 9" spndl. trvl., No. 4 MT taper, 16-7/8" bed width, 15 HP, 15"
4-jaw chuck, taper, (3) steadyrests, coolant, S/N 4576.
780 1 ENGINE LATHE, MONARCH 44" X 60", Mdl. 4025-31, Series 91, 44" sw. over bed, 31" sw. over
crosslide, 60" btwn. cntrs., 52" spndl. cntr. to floor, (36) spndl. spds.: 6–750 RPM, 4-1/16" spndl. hole, D-
1-11 spndl. nose, No. 7 MT, (48) fds.: 0.0035–0.196 IPR, 7-1/4" tlstk. spndl. dia., 12" tlstk. spndl. trvl., 31-
1/2" bed width, 40 HP, faceplate type chuck, taper attach., rapids, thread dial, S/N 50219.
781 1 TRACER LATHE, MONARCH 20" X 30", Series 61, 20.5" sw. over. bed, 10.5" sw. over. slide, 30" btwn.
cntrs., spds.: 24–1,000 RPM, threading, tlstk., 7.5 HP, tracer attach., thread dial, coolant pump, chip pan,
S/N 39497.
782 1 CNC VERTICAL MACHINING CENTER, MAZAK MDL. V-655B, Mazatrol M-32B CNC ctrl. w/color thin
film transistor, 68.5" x 25.59" tbl., 4,400 lb. load, 59.05" X-axis, 25.59" Y-axis, 25.59" Z-axis,
7.87"–33.46" tbl. to spndl. nose, (2) spndl. spds.: 25–6,000 RPM, No. 50 taper, (60) tools, 20 HP, chip
conv., flood coolant, auto. pallet shuttle sys., tool measure sys., rigid tapping, S/N 106339.
Page 32
HMT Final Auction CatalogLOT QTY DESCRIPTION
783 1 ENGINE LATHE, MONARCH 34" X 168", Mdl. 2516-25, Series 613, 34" sw., 25" sw. over slide, 168"
btwn. cntrs., 2-1/16" spndl. hole, D-1-8" Camlock, spndl. spds.: 12–1,500 RPM, (66) fds.: 0.0022–0.1366
IPR, (66) threads, 1/2 to 30 TPI, 4-1/2" tlstk. spndl. dia., 9" trvl., 19-1/2" bed width, 25 HP, 4-way pwr.
rapids, inch/metric threading, 4-way toolpost, chip pans, S/N 52731.
784 1 BALANCING MACHINE, SCHENCK
785 1 ENGINE LATHE, SHENYANG (SMTCL) 39" X 120" HEAVY DUTY, Mdl. CW61100B/3000, 39.3" sw.
over bed, 24" sw. over carriage, 118" max. workpiece length, 5.11" spndl. bore, 30" bed width, spds.:
3.15–315 RPM, 6.3" tlstk. quill, 12" quill trvl., No. 6 MT tlstk., 30 HP, 39" 4-jaw chuck, followrest,
steadyrest, thread dial, chuck guard, S/N GM0126.
786 1 ROTARY SURFACE GRINDER, SULMECANICA 39", Mdl. RAPG-100, 39.4" tbl., 1,700 lb. load, 10, 20
and 30 RPM tbl. spds., 11.8" grndng. height, 19.7" whl. dia., auto. downfeed incr., 60 HP, Marposs Mdl.
E5 inprocess gauging, coolant filter sys., mist buster, whl. dresser, S/N 1111.
787 1 ROTARY SURFACE GRINDER, BLANCHARD 36", Mdl. 18D-36, 36" mag. one-piece chuck, 39" sw.
inside wtr. guards, 12" under whl., 6, 9, 12, 18, 25 and 33 RPM chuck spds., 18" whl., 3,000 lb. load cap.,
720 RPM whl. spd., 30 HP, whl. dresser, S/N 10461.
788 1 UNIVERSAL CYLINDRICAL GRINDER, NORTON 18" X 72", Mdl. U-4, 18" sw., 72" btwn. cntrs., 2–240
IPM tbl. spd., 7 deg. for./2 deg. back tbl. swvl., 14" x 1-1/2" x 5" grndng. whl., 180 deg. whl. head swvl.,
360 deg. whl. head ways swvl., 360 deg. hdstk. swvl., D-1-6" hdstk. spndl. nose, 5 HP whl. head, 1 HP
workhead, 2 HP I.D. spndl., sw. down I.D. spndl., inf. vari. work spds., auto. lube, hyd. sys., coolant sys.,
tlstk., work rests, S/N L-2274.
790 1 ENGINE LATHE, LODGE & SHIPLEY 22" X 96", 22-1/2" sw. over bed, 15" sw. over cross slide, 96"
btwn. cntrs., 2-1/2" spndl. hole, spds.: 13–752 RPM, No. 5 MT, 30 HP, coolant pump, chip pan bed,
hardways, S/N 43057.
791 1 ENGINE LATHE, SPRINGFIELD 20" X 174", 20-1/2" sw. over bed, 14-1/2" sw. over cross slide, 174"
btwn. cntrs., spds.: 11–423 RPM, threading, No. 5 MT, 7-1/2 HP, 15" 3-jaw chuck, 18" 4-jaw chuck, taper
attach., steadyrest, followrest, chip pan, S/N 48077.
792 1 BALANCING MACHINE, STEWART WARNER MDL. 2010, horiz., belt driven, 10,000 lb. cap., 68" work
dia., 208" work length, 48" max. dia. drive cap., 10-1/2" max. Trunnion dia. cap., 10 HP, (2) stands,
walking mechanisms on left column, right column and drive tower, S/N N/A.
793 1 CNC CURVIC COUPLING GRINDER, GLEASON MDL. 130, 60" max. dia., 50" max. dia. coupling,
0.375" max. full depth, 20 to 360 teeth index range, 10" sliding base trvl., 20.5" dia. spndl. hole,
3.75"–18" machine centerline to spndl. nose, 9"–13-1/4" min./max. point dia. of grndng. whls., 15 HP whl.
drive mtr., centrifugal filter, scavenger tank, S/N 674302.
795 1 TABLE TYPE HORIZONTAL BORING MILL, UNION 5-1/8", Mdl. BFT130/6, 5-1/8" spndl., ISO 50
taper, (27) spndl. spds.: 4.5–900 RPM, (18) facing head spds.: 4.5–180 RPM, 39.3" spndl. trvl., 55" x 63"
rotation tbl., 78" tbl. cross trvl., 78" headstock vert. trvl., 17,600 lb. tbl. load, threading, 25 HP, 30.5"
facing head, pendant, outriggers, S/N 11287.
796 1 ROTARY SURFACE GRINDER, BLANCHARD 42", Mdl. 22AED-42, 42" mag. chuck, 48" max. sw.
inside wtr. guards, 24" under whl., 22" seg. whl., 720 RPM whl. spd., 50 HP, dry base, splash guard, whl.
dresser, auto. lube, S/N 15553.
Page 33
HMT Final Auction CatalogLOT QTY DESCRIPTION
797 1 ROTARY SURFACE GRINDER, BLANCHARD 36", Mdl. 18-36, 36" mag. chuck, 39" sw. in wtr. guards,
12" under whl., 6, 9, 12, 18, 25 and 33 RPM chuck spds., 3,000 lb. load, 720 RPM whl. spd., 25 HP, wet
base design, coolant pump, seg. whl., splash guards, whl. dresser, S/N 7590.
798 1 DRILL GRINDER, GIDDINGS & LEWIS WINSLOMATIC HC, new 1997, 1/16"–1-1/2" drill dia. cap., 90
to 140 deg. pt. angle, 12" x 3/4" x 5" grndng. whl., 1 HP spndl. mtr., 1/4 HP wrk. head mtr., coolant, S/N
940-715-97.
799 1 MANUAL SHEETMETAL BENDING BRAKE
800 1 TABLE TYPE HORIZONTAL BORING MILL, UNION 5-1/8", Mdl. BFT130/5, 5-1/8" spndl., ISO 50 PDB
spndl. taper, (27) spndl. spds.: 4.5–900 RPM, (18) facing head spds.: 4.5–180 RPM, 39.3" spndl. trvl.,
55" x 63" rotation tbl., 78" tbl. cross trvl., 47" tbl. long trvl., 63" headstock vert. trvl., 17,600 lb. tbl. load, 25
HP, feeds, rapids, threading, 30.5" facing head, pwr. drawbar, outboard suppt., pendant, outriggers, S/N
10668.
801 1 ROTARY SURFACE GRINDER, BLANCHARD 36", Mdl. 20CK-36, 36" mag. chuck tbl., 38" sw. inside
wtr. guards, 12" under whl., 6 chuck spds., 6, 9, 12, 18, 25 and 33 RPM, 20" seg. whl., 3,000 lbs.
workload, 720 RPM whl. spd., 40 HP, coolant pump, splash guards, whl. dresser, pwr. whl. elev., S/N
12813.
802 1 CNC HORIZONTAL LATHE, MAZAK 24" X 80", Mdl. M-5, Fanuc 5T CNC ctrl., 24" sw. over bed, 13"
sw. over crosslide, 80" btwn. cntrs., 4" spndl. bore, 30 HP, 15" 3-jaw hydraulic chuck, 2,000 RPM, tlstk.,
chip conv., splash guard, coolant, S/N 40395.
803 1 CNC HORIZONTAL LATHE, MAZAK 22" X 60", Mdl. M-4, Fanuc 5T CNC (issue with ctrls.), 22" sw.
over bed, 11" sw. over cross slide, 60" btwn. cntrs., 3.125" spndl. bore, 20 HP, 12" 3-jaw hyd. chuck,
spds.: 13–2,200 RPM, tlstk., chip conv., splash guard, coolant, S/N 12716.
804 1 INTERNAL GRINDER, HEALD MDL. 172, 36" sw. inside chuck guard, 1' to 14" dia. hole grndng. cap.,
13" grndng. stroke, 6.25 to 13.5" gap adj., 45" floor. to spndl., 12" dia. workhead spndl. flange, 0–18 FPM
tbl. spds., 0–210 RPM workhead spds., 5 HP grndng. spndl., 5 HP workhead mtr., pwr. feed adj.,
splash/chip guard, S/N 28503.
805 1 VERTICAL HONE, SUPERIOR MDL. 25V72, 25" honing cap., 72" spndl. stroke, 20" cntr. of spndl. to
column face, (3) spndl. spds.: 50–100 RPM, 100–200 RPM, 200–400 RPM, vari. reciprocating spds., 48"
x 48" base work surf., 25 HP, auto./man. hone exp., oper. pushbutton ctrl. station, Barnesdrill mag. and
fabric filters (Md. MPE-20), cycle timer, sparkout timer, dwell timer, add feed timer, S/N 8804005.
806 1 HYDRAULIC SURFACE GRINDER, GMP 39.75" X 12.75", Mdl. 3G1000/400, 39" x 12" tbl. (EM chuck),
39.75" long tbl. trvl., 12.75" cross trvl., 13.7" max. work height, 5.5 HP, over the whl. dresser, incr.
downfeed, pwr. whl. elev., lube sys., push button oper. station, S/N 198614.
807 1 TABLE TYPE HORIZONTAL BORING MILL, UNION 5", Mdl. BFT125/5, 5" spndl., metric 80 taper, 39"
spndl. trvl., spndl. spds.: 3.55–710 RPM, 55" x 63" rotation tbl., 63" tbl. cross trvl., 80" tbl. long trvl., 63"
headstock vert. trvl., 17,600 lb. tbl. load, 23 HP, 31" built-in facing head, outboard suppt., pendant, S/N
8662/66.
808 1 HORIZONTAL HONE, BARNES MDL. 5E, honing cap. up to 6" dia., 2"–144" adj. stroke (carriage trvl.),
10–100 FPM rate of carriage trvl., vari. spndl. spds.: 50–473 RPM, 24"–144" cap. btwn. cntrs., 15 HP
(main drive); 15 HP (hyd.), coolant sys. w/mag. and fabric filters, from U.S. Government reserve, S/N
ZP11047.
Page 34
HMT Final Auction CatalogLOT QTY DESCRIPTION
809 1 PLAIN HORIZONTAL MILL, KEARNEY & TRECKER NO. 650TF20, 106" x 19-1/2" table, 60" long.
feed, 16" cross, 21" vert. (24) spdl. spds: 15-1500 RPM, No. 50 taper, (32) feeds, 150 IPM rapids, 50
HP, twin elev. screws, dbl. overarm, rear controls, coolant, S/N 57-1001-11
810 1 SURFACE GRINDER, BROWN & SHARPE 6" X 18", No. 21, 6"W x 18"L x 9.5"H work cap., 18" x 6"
work surf. (mag. chuck), 3,200 RPM spndl., auto. long and cross feeds, S/N 523-2-1408.
811 1 PLAIN HORIZONTAL MILL, KEARNEY & TRECKER NO. 425TF, 88" x 17" tbl., 42" long feed, 14"
cross, 18" vert., (24) spndl. spds.: 13–1,300 RPM, No. 50 taper, 25 HP, twin elev. screws, double
overarm, rear ctrls., coolant pump, S/N 9-8407.
811A 1 VERTICAL BANDSAW, DOALL MDL. TF-14H
811B 1 ROTARY SCREW TYPE AIR COMPRESSOR, INGERSOLL RAND MDL. SSR2000, 75 HP
812 1 PLAIN HORIZONTAL MILL, CINCINNATI NO. 520-16, 50" long. table travel, 16" table cross travel, 20"
table vert. travel, 88" x 16" table, (24) spdl. spds: 16-1600 RPM, S/N 11A45P1ANE-18
813 1 EXTRUSION EXTRUDER, NRM MDL. 3.5PMIII 12-1L/D RUBBER BACK FEED, 3.5" size, 12:1 I/D, 75
HP, 1,750/2,100 RPM w/vari.-spd. drive, air cooled, single screw type, Hayden Mdl. TT-418 air cooler,
300 PSIG, 2 HP, NRM transmission (S/N T-78035), 100 HP, 1,750 max. RPM, roller spd. oper. ctrl.
station, press. meters for head brake, head extend and sensor, elect. panel, oper. ctrl.-stations, mach.
mtd. on vari.-spd. trvl. car, (1) extra screw and barrel, remote ctrl. pendant station, air rec. tank, mtr.
circuit ctrl. w/(3) temp. zone meters, S/N T78035.
814 1 SURFACE GRINDER, WARNER & SWASEY NORTON 16" X 36", S/N 0200
815 1 UNIVERSAL CYLINDRICAL GRINDER, LANDIS 30" X 72", Mdl. 3RH, 30" sw., 72" btwn. cntrs., 14" x 1-
1/2" x 5" stand grndng. whl., 180 deg. upper grnd. whl. swvl., 60 deg. CW, 30 deg. CCW lower ginding
whl. swvl., 1,720–2,185 RPM whl. spds., 2 to 240 IPM work carriage trav., 15,000 RPM int. spndl. spd.,
12 to 360 RPM hdstk. work spds., 120 deg. hdstk .swvl., 6A-2 spndl. nose, 5 HP whl. head mtr., 1-1/2
HP workhead, sw. dwn. int. grndng. spndl., auto. lube, hyd. infeed, coolant sys., S/N 891-45.
816 1 CNC HOLLOW SPINDLE LATHE, BINNS & BERRY 48" X 120", Fagor 8050 CNC ctrl., 48" sw. over
bed, 38" sw. over cross slide, 120" btwn. cntrs., 14.25" spndl. bore, A2-20 spndl. nose, spndl. spds.:
5–600 RPM, 8 tool-pos., vdi turret, 50 HP, 42" 4-jaw chuck (3 jaw scroll and 1 ind. jaw), pwr. chuck
wrench, (4) steadyrests, tlstk., chip conv., chip/splash guards, misc. turret tooling, S/N 80217.
817 1 TABLE TYPE HORIZONTAL BORING MILL, CINCINNATI GILBERT 4", 4" spndl., No. 50 taper, spds.:
7–1,610 RPM, 30" spndl. trvl., 48" x 60" tbl., 60" tbl. cross trvl., 48" headstock vert. trvl., 20 HP, pendant,
hard ways, tele. way covers, pwr. drawbar, S/N 4C-180.
817A 1 AIR LIFT ROTARY TABLE, CINCINNATI GILBERT, 36" x 48"
818 1 ENGINE LATHE, DAEWOO 25" X 120", Mdl. DA25, 24.375" sw. over bed, 15.375" sw. over crosslide,
120" btwn. cntrs., 3" spndl. bore, D-1-8" Camlock spndl. nose, (20) spndl. spd. steps: 25–2,000 RPM,
12.25" crosslide trvl., 5.875" comp. rest trvl., tlstk., taper attach., inch/metric thread, chip pans, coolant
pump, S/N 040060.
819 1 CNC KEYSEATER, FROMAG MDL. RA CNC 100/750, Fromag CNC ctrl., 0.118"–3.93" keyway width,
29.52" keyway length, 0.393"–19.68" bore dia., 0 to 787 IPM cut spd., 0 to 1,968 IPM return spd., 40,000
N (Newtons) cutting force, 19.68" x 30.31" tbl., 12.0" tbl. height, 15 HP, hyd. tool retract, cutting oil sys.,
hyd. sys., tool guide, S/N 46701 ASK3348-4.
Page 35
HMT Final Auction CatalogLOT QTY DESCRIPTION
820 1 PRODUCTION MILL, CINCINNATI MILACRON MDL. 100 POWERMATIC SIMPLEX, 42" x 48" tbl., 7-
1/2 HP drive, 3 HP feed, auto. backlash elim., auto. spndl. stop, auto. cyc. select and ctrls., (2) arbors,
arbor support, coolant sys., S/N 11B1P1AHE-66.
821 1 ENGINE LATHE, SOUTHBEND 13" X 20", Mdl. CL-1307 13" sw. over bed, 7" sw. over cross slide, 20"
btwn. cntrs., 4,000 RPM, 5 HP, taper attach., collet chuck, steadyrest, chuck guard, chip pan bed, S/N
72 SP 132.
822 1 TABLE TYPE HORIZONTAL BORING MILL, GIDDINGS & LEWIS 4", Mdl. J65-E4-T, 4" spndl., No. 50
PDB taper, 30" spndl. trvl., spds.: 6.9–1,320 RPM, 48" x 84" tbl., 20,000 lb. load, 72" tbl. cross trvl., 60"
headstock vert. trvl., 34" saddle long trvl., 20 HP, 3-shear vert. ways, outriggers, Newall 3-axis D.R.O.,
pendant, coolant pan, S/N 400-57-65.
823 1 TABLE TYPE HORIZONTAL BORING MILL, GIDDINGS & LEWIS 4", Mdl. 70-4JE-3X, 4" spndl., No.
50 PDB taper, spndl. spds.: 6.9–1,320 RPM, 36" x 60" tbl., 15,000 lb. load, 48" tbl. cross trvl., 48"
headstock vert. trvl., 20 HP, Machine Mate PC based ctrl., Hansen refrigeration unit, operator’s-station,
S/N 405-28-68.
824 1 TABLE TYPE HORIZONTAL BORING MILL, SUMMIT 4", 3.94" spndl., No. 50 NMT, spds.: 12.5–1,180
RPM, 29-1/2" spndl. trvl., 48" x 60" rotation tbl., 11,000 lb. cap., 68" tbl. cross trvl., 50" headstock vert.
trvl., 48" saddle trvl., 15 HP, built-in rotation tbl., pendant, 20" facing head, way covers, outboard suppt.,
S/N 110.
825 1 TABLE TYPE HORIZONTAL BORING MILL, GIDDINGS & LEWIS 3", Mdl. 330T, 3" main spndl., No. 5
MT, 30" x 62" tbl., 48" tbl. cross trvl., 36" long trvl., 36" headstock vert. trvl., rapids, S/N N/A.
826 1 CNC LATHE, DIANICHI 27" X 39", Mdl. B-70, Fanuc 6TB CNC ctrl., 27" sw. over bed, 19.5" over
carriage, 39" btwn. cntrs., 4" spndl. hole, spndl. spds.: 10–1,800 RPM, 6.3" tlstk. spndl. dia., No. 5 MT
taper, 12-tool turret, 40/50 HP, Kitagawa 3-jaw front mount chuck, chip conv., misc. tooling, S/N N/A
827 1 TABLE TYPE HORIZONTAL BORING MILL, GIDDINGS & LEWIS FRASER 5", Mdl. 65T5, 5" spndl.,
No. 50 taper, 36" spndl. trvl., spndl. spds.: 7.5–975 RPM, 60" x 120" tbl., 108" tbl. cross trvl., 72"
headstock vert. trvl., 30 HP, pwr. draw bar, outboard suppt., outriggers, pendant, S/N 150-719-64.
827A
1
AIR LIFT ROTARY TABLE, GIDDINGS & LEWIS 48" X 48", 30,000 lb. load, (6) T-slots on 7-1/2"
centerline, 9-1/2" height, 360 deg. tot. in 1/2 deg., S/N 040-622-63.
828 1 FACING HEAD, GIDDINGS & LEWIS 26"
829 1 POWERED ROTARY TABLE, 64"
Page 36