COMPLETE TALL TOWER MANUFACTURING FACILITYFeaturing: Late Model Peddinghaus Anglematic Lines; Wide Array of Fabricating Machinery; Late Model Welding Equipment;

Material Handling Equipment; Huge Quantity of Raw Materials; Much, Much More! Plus Real Estate to Be Auctioned Subject to Confirmation of the High Bid – See Page 5

Surpus To the Ongoing Operations of

STAINLESS LLC1535 Manatawny Drive

PINE FORGE (Pottstown Area), PA 19548

(See Directions on Back Page)

AUCTION: THURSDAY, OCTOBER 10 • 10:00 A.M.INSPECTION: Wednesday, October 9

9:00 A.M. to 4:00 P.M. & Morning of Sale

BUYER’S PREMIUM: 13% ONSITE • 16% WEBCAST

Read Partial Terms and Conditions

on Back Page of Brochure

<PEDDINGHAUS MDL. AFPS-643Q CNC ANGLE LINE

>PEDDINGHAUS MDL. APS-1563

“TOWERMASTER” CNC ANGLE LINE

AUCTION

Headquarters:2901 W. Sam Houston Pkwy. N., Suite A-130

Houston, TX 77043

FAX: (713) 672-7905PHONE: (713) 691-4401

E-MAIL: pmi@pmi-auction.comWEBSITE: www.pmi-auction.com

PMI PA Lic. #AY00160LBob Braman PA Lic. #AU005069 • Ron Moore PA Lic. #AU005068

HOUSTON • DALLAS • ST. LOUIS

Sale Conducted By:

On-Site Bidding in Pine Forge, PA or Bid Via Webcast at

W.F. WELLS MDL B-30 HORIZONTAL BANDSAW

MILLER “BOBCAT 225” PORTABLE WELDER/GENERATOR

GEKA 80 T. CAP. HYDRAULIC IRONWORKER JOE FULLER 10,000 LB. CAP. PIPE TURNING ROLL SET

CNC CNC

19981998

2008

30"CAPACITY

3AVAILABLE

2 3

GEKA 80 T. CAP HYDRAULIC IRONWORKER

HANNIFIN 200 T. CAP. 4-POST HYDRAULIC PRESS

PEDDINGHAUS MDL. AFPS-643Q CNC ANGLE LINE

>PEDDINGHAUS

MDL. AFPS-643Q CNC ANGLE LINE,

INFEED SYSTEM

>VIEW OF SIEMENS

CONTROL PEDESTAL

IRONCRAFTER 95 T. CAP. HYDRAULIC IRONWORKER

PEDDINGHAUS FABRILINE 35 T. CAP. COPER/NOTCHER

PEDDINGHAUS MDL. 210A/20 IRONWORKER

PEDDINGHAUS FABRILINE HYDRAULIC ANGLE SHEAR LINE

CNC ANGLE LINESPEDDINGHAUS MDL. AFPS-643Q “ANGLEMATIC", new 2008, Siemens 840Di CNC control, 6" x 6" x 5/8" max. angle cap., 1-1/2" x 1-1/2" x 1/8" min. angle cap., 6" x 5/8" max. flat cap., 2" x 1/4" min. flat cap., (2) 75 T. double punch hyd. punch units, 230 T. sgl. cut hyd. shear, “Signomat” marking press, 40' roller infeed conveyor w/cross chain magazine conveyor, 20' roller outfeed conveyor w/unload station, full surround light curtain safety device, S/N 50696.PEDDINGHAUS MDL. APS-1563 “TOWERMASTER”, Fagor 8020 CNC control system, 6" x 6" x ¾" max. angle size (will punch 8" x 8" x ¾"), 1-1/2" min. angle size, (2) 88 T. 3-punch hyd. punch units, 250 T. hyd. angle shear, 120 T. 7-sta. marking press, 45' roller infeed conveyor w/cross chain magazine conveyor, 33' roller out conveyor w/unload section.

PEDDINGHAUS ANGLE SHEARING & COPING SYSTEM

FABRILINE/PEDDINGHAUS MDL. 35T HYDRAULIC COPING AND NOTCHING MACHINE, 6" x 6" notcher unit, 2" x 2" x 5" coping unit, swivel base mount, heavy fabricated stand, elec. foot switch control, S/N 2768; FABRILINE APPROX. 6' X 6' X 1/2" CAP. HYDRAULIC ANGLE SHEAR, mtd. to 45 deg. H.D. right angle stand w/40' x 11"W. H.D. roller infeed conveyor, 20' x 12"W. H.D. outfeed conveyor, Fabriline Mdl. FH12EPES 10 HP hyd. system, elec. foot switch control, S/N 1565.

HYDRAULIC 4-POST PRESSESWILSON 200 T. CAP. MDL. DC-SA, 20" x 21" btwn. posts, 35" x 35" sq. ram and bed, 22" daylight, 7-1/2 HP self-contained hyd. system, full surround guarding, hand level control, S/N 2413/1966.HANNIFIN 200 T. CAP. MDL. TE8135, 12" x 25" dist. btwn. posts, 24" x 38" T-slotted bed and ram, 21" daylight, 20 HP self-contained hyd. unit, full surround guarding, S/N 8135.

HYDRAULIC MARKING PRESSCUSTOM UP-ACTING C-FRAME DESIGN, heavy fabricated steel frame, arranged for letter and number stamps, 5 HP unitized hyd. system, S/N N.A.

PEDDINGHAUS MDL. APS-1563 “TOWERMASTER” CNC ANGLE LINE

CNC

CNC CNC

20082008

1998

2 3

HARRISON 17" X 72" GAP BED ENGINE LATHE

JOE FULLER 10,000 LB. CAP. PIPE TURNING ROLL SET

BABIN 24" “CIRCLEMATIC” BOLT CIRCLE DRILLING MACHINES

CINCINNATI BICKFORD 4' X 11" RADIAL ARM DRILL

W.F. WELLS MDL B-30 HORIZONTAL BANDSAW

CHEVALIER 6" X 18" HYDRAULIC SURFACE GRINDER

LAGUN MDL. FTV-2 VERTICAL TURRET MILLING MACHINE

PIPE TURNING ROLL SETSTELEDYNE READCO 10 T. CAP., 12" x 4" rubber tires, adj. height steel wheel idler roll, on fabricated steel stand.

(3) JOE FULLER 10,000 LB. CAP. MDL. JFRI-10, new 1998, 12" x 4-1/2" rubber tires, variable spd. drive, unitized construction, on fabricated I-beam stands, S/N 98026, S/N 98072, S/N 98073.

(2) RANSOME APPROX. 5 T. CAP., on fabricated roller stand, adj. height steel roller idler, variable spd. drive, dual 16" x 2-1/2" rubber tires, approx. 30' V-groove track, S/N’s N.A.

CUSTOM APPROX. 3 T. CAP., 12" x 2-1/2" rubber tires, on fabricated steel stand.

VARIOUS STEEL WHEEL IDLER SETS.

PIPE THREADING EQUIPMENTOSTER MDL. 774 PIPE AND BOLT THREADER, 1/2" to 4" pipe, 1/2" to 3" bolt, self-opening die head, cut-off tool, S/N ACN333.

OSTER MDL. 792A-TD ROTATING DIE PIPE AND BOLT THREADER, 1/4" to 2" pipe thdng., 1/4" to 2-1/4" UNF bolt thdng., spds: 37–184 RPM, assorted chasers, S/N 102.

RIDGID PIPE STAND; RIDGID RATCHET STYLE MANUAL PIPE THREADING TOOL; RIDGID PIPE REAMERS; LARGE ASSORTMENT OF THREADING DIES FOR THE ABOVE EQUIPMENT.

IRONWORKERSIRONCRAFTER 95 T. CAP. MDL. 95-95, hyd. punch end, H.D. bar/10" flat shear, notching attach., independent individual Ironcrafter Mdl. HP-40 40 T. punch unit, S/N 80T339.

GEKA 80 T. CAP. MDL. HYDROCROP 80/A, new 1998, 5" x 5" x 1/2" angle cap., 5/8" x 18" flatbar cap., 1-3/4" rd. bar cap., 1-1/2" through 9/16" punch cap., elec. foot pedal control, gauging bar w/elec. switch, coping attach., material suppt. table, roller conveyor unit, S/N 8861.

PEDDINGHAUS MDL. 210A-20, 6" x 6" x 1/2" angle cap., 2-3/16" rd. bar, 13-3/8" x 3/8" flat shear, coper attach., material suppt. table, roller conveyor unit, S/N FG564.

SURFACE GRINDERCHEVALIER MDL. FSG-2A618, 6" x 18" cap., 2-axis hyd. table motions, 6" x 18" perm. magnetic chuck, S/N 2A-2680.

RADIAL ARM DRILLCINCINNATI BICKFORD 4' X 11" COLUMN, large cast iron layout table, spds: 27–1,250 RPM, #4MT spdl., S/N 2E928.

BOLT CIRCLE DRILLS(2) BABIN MDL. 24 “CIRCLEMATIC", 4" to 30" bolt circle diameter, 2-1/8" max. drill dia., 6" spdl. Stroke, #5MT, variable spdl. spds.: 0–500 RPM 15" 3-jaw air chuck, S/N ADR349, S/N ADP253.

ENGINE LATHESHARRISON 17" X 72" GAP BED, 3.15" spdl. hole, spds: 35–1,500 RPM, 12" dia. 3-jaw chuck, 4-way toolpost, S/N 118048.

EBAK 16" X 30", inch/metric thdng., 1-1/2" spdl. hole, spds: 30–1,200 RPM, Aloris toolpost.

MILLING MACHINESLAGUN MDL. FTV-2 VERTICAL TURRET, 10" x 50" table size, hardened and ground knee, variable spds: 58–4,250 RPM, Acu-Rite Millmate 2-axis DRO, longitudinal pwr. feed, S/N SE-37472.

(2) CINCINNATI NO. 2 MDL. 2P HORIZONTAL, spds: 20–1,500 RPM, 12" x 54" table size, #50NST spdl. taper, rear controls, S/N B5707-17, S/N B5309-22.

CINCINNATI NO. 2 VERTICAL, 12" x 50" table size, flatbed drive, S/N A1578H.

HORIZONTAL BANDSAWSW.F. WELLS MDL. G30, 1-1/2" blade size, 30" rd. cap., approx. 27" x 40" rect. cap., variable blade spds: 0–500 FPM, hyd. clamping, 15,000 lb. wt. cap., approx. 36'L. x 40"W. H.D. infeed roller conveyor, 30'L. H.D. outfeed roller conveyor, S/N A-560G733.

(2) JOHNSON 10" MDL. J, 10' infeed conveyor w/manual gauging attach., 10' roller outfeed conveyor, 1" blade size, S/N H22719, S/N N.A.

1998

2AVAILABLE

30"

CAPACITY

3AVAILABLE

4 5

COLD SAWKALTENBACH MDL. HDM800, 31-1/2" blade dia., 9.84" rd. cap., 19.68" x 6.69" rect. cap., 10 HP, auto. cycle, swivel mitre base, 105' H.D. infeed conveyor, with 30' bar load carriage, infeed magazine conveyor, hyd. clamping, S/N 30258.

MISCELLANEOUS FABRICATING MACHINESWHITNEY 4-STATION HYD. PUNCH UNIT, (3) Whitney 31-1/2 T. Mdl. 808-144 hyd. press units, (1) Whitney approx. 40 T. Mdl. 730-02 hyd. flange press, foot pedal control, Whitney 10 HP self-contained hyd. pump system, 20'L. adj. pump beam, various rail attachments, (3) mechanical clamp assemblies.(4) K.R. WILSON 75 T. CAP. MDL. 7FMD3 H-FRAME, elec. drive, 42" btwn. uprights, adj. height bed, S/N 2127.WHITNEY 70 T. CAP. WEB PUNCH, crane bale, Powerteam dual station hyd. pwr. supply unit.WHITNEY PORTABLE WEB AND FLANGE PUNCH SET, 100 T. and 70 T. punches, with self-contained power supply, 40' roller conveyor bed, and spring counterbalanced crane bale attachments.

MISCELLANEOUS EQUIPMENTGRAYMILLS TURBO CLEAN-O-MATIC MDL. C145T17DC2A PARTS WASHER, 30" x 45" x 32" dp. tank, recirculating pump and gun.DELTA 17" 4-SPINDLE GANG TYPE DRILL, 76" x 23" cast iron table, #2MT spdls., S/N N.A.

ELECTRIC EYE BURNING MACHINEL-TEC MDL. CM250 ELECTRIC EYE BURNING MACHINE, (6) oxy. fuel burning torches w/motorized torch holders, 84" max. burning width, 10' x 20' fabricated steel burning table, Mdl. AST tracer head, S/N N.A.

PORTABLE WELDERMILLER BOBCAT 225G, Onan Performer 16 gasoline engine, 225 amps @ 25 v., 100% duty cycle, 8,000 watt built-in generator, S/N KD462147.

WELDING MACHINES(6) MILLER MDL. MP65E, 650 amps @ 44 v., 100% duty cycle, S/N HF824471 and S/N HE781012 w/Miller 30E wire feeders on carts, S/N HF831060 w/Millermatic wire feeder on cart, S/N HE790483, S/N HE7E850017, S/N HE740163.(4) LINCOLN IDEALARC MDL. DC600, 600 amps @ 44 v., 100% duty cycle, S/N AC550743 w/wire feeder, S/N U1980113716, S/N U1980113719 and S/N U1980113717 w/Lincoln LN7 wire feeds on roller cart, S/N AC562665.(2) LINCOLN IDEALARC MDL. R3S600, 600 amps @ 44 v., 100% duty cycle, Bernard Tela-Boom 3-section extendable boom, Lincoln LN5 Squirt wire feeder, S/N AC243895, S/N AC245125.(6) LINCOLN IDEALARC MDL. TM-500, 500 amps @ 40 v., 60% duty cycle, Air Arc lead, welding cables, S/N AC180986 and S/N AC227993 w/welding leads, S/N AC168926, S/N AC213411, S/N AC168924, S/N AC229811.HOBART MEGA MIG MDL. 450, 450 amp @ 38 v., 100% duty cycle, Bernard Tela-Boom 3-section welding boom, Hobart 2000 vari-able spd. wire feeder, S/N 84WS06773.HOBART MEGAFLEX MDL. 450DS, 450 amps @ 38 v., 100% duty cycle, Bernard Tela-Boom 3-section welding boom, Hobart 2000 vari-able spd. wire feeder, S/N 84WS04914.(2) LINCOLN MDL. R3S400 DC, 400 amps @ 40 v., 80% duty cycle, wire feeder, S/N AC295129, S/N AC295131.LINCOLN MDL. CB400 MIG WELDER, 400 amps @ 36 v., 100% duty cycle, Lincoln LN7 wire feeder on cart, S/N U1970711261.MILLER MILLERMATIC MDL. 350P INTE-GRATED MIG WELDER, 350 amps, integrat-ed wire feeder and MIG gun, S/N MC233287N.(2) MILLER MDL. CP-250TS MIG WELDERS, 250 amps @ 35 v., 100% duty cycle, Miller-matic variable spd. wire feeders on carts, S/N U481226, S/N U482692.

L-TEC OPTICAL FLAME CUTTING MACHINE

KALTENBACH MDL. HDM-80 COLD SAWING MACHINE

MILLER “BOBCAT 225” PORTABLE WELDER/GENERATOR

<LINCOLN MDL. DC-600 MIG WELDING MACHINES

>LINCOLN

MDL. CV-400 MIG WELDING

MACHINE

HUGE ASSORTMENT OF TOWER BOLTS, NUTS & WASHERS

K.R. WILSON 75 T. CAP H-FRAME SHOP PRESS

4AVAILABLE

AUCTION:THURSDAY, OCTOBER 10

10:00 A.M.

4 5

4" SEALTITE FLEXIBLE CONDUIT ON REEL

RANSOME 1,000 LB. CAP. WELDING POSITITONER

LADDER WELDING FIXTURE

TOWER LEG WELDING FIXTURE PARTIAL VIEW OF TOWER BARSTOCK MATERIAL

WELDING POSITIONERSRANSOME 1,000 LB. CAP. MDL. 10P, adj. height base, 45" dia. rd. platen, variable spd. rotation, control pedestal, cutting torch ar-rangement for circular cutting, S/N 41750.

RANSOME APPROX. 500 LB. CAP., 26" dia. rd. platen, manual tilt, pwr. rotation, variable spd. S/N N.A.

WELDING ACCESSORIESPHOENIX ELECTRODE TYPE 300 AND TYPE 500 ROD OVENS, 100 deg. to 550 deg. F. max. temp.; KOIKE ARONSON MDL. 108 RADIA-GRAPH TRACK TORCH, 4-50 IPM, oxy. fuel burning torch and as-sorted track, S/N J0900; GASO EQUIPMENT & CO. TRACK TORCH, S/N 76021; SEVERAL LARGE STEEL WELDING AND LAYOUT TA-BLES; ASSORTED OXY. FUEL CUTTING TORCH SETS; ROSEBUD HEATING TORCHES.

TOWER CONSTRUCTION FIXTURES & EQUIPMENT

LARGE QTY. OF FABRICATED STEEL TOWER SECTION PATTERNS, for gauging gussets, welds, hole locations and construction techniques.(2) APPROX. 30'L. TOWER LEG CONSTRUCTION FIXTURES, roller bed clamping units, heavy fabricated steel construction, assorted check points and reference locations.STEEL LADDER FIXTURE w/pneu. clamping for ladder rungs, pwr. rotation, 12" rung spacing, approx. 16" rung width.LARGE ASSORTMENT OF TOWER COMPONENT DIE SETS; NOTCHING DIES; SETUP/GAUGING FIXTURES.

SEVERAL

AVAILABLE

TOWER COMPONENTS

ASSORTMENT OF TUBULAR STEEL AND GALVANIZED TOWER COMPONENTS; HUGE ASSORTMENT OF A325 TYPE 1TOWER BOLTS, in various sizes, galvanized and plain fin-ish, 3/4", 1", 1-1/8", 5/8", 7/8" and 1/2"; WIDE ARRAY OF FASTENERS FOR TOWERS INCLUDING U-BOLTS, WASH-ERS, ACORN NUTS, HEAVY HEX BOLTS, up to 2".

TOWER COMPONENT BARSTOCK

(475,000+) LBS. NEW ALLOY BARSTOCK FOR TOWER SEC-TION COMPONENTS: all bars are 30'-3" long, and range in diameter from 8" to 2-1/4" di-ameters. (See our website for complete listing.)

SIDE VIEW OF MAIN MANUFACTURING BUILDING

FRONT VIEW OF MAIN MANUFACTURING BUILDING

REAL ESTATE TO BE AUCTIONED AT 10:00 A.M.

Subject to Confirmation of High Bid PROPERTY: 21 total acres, 9.85 acres of usable cleared land (most is graded and limestone paved), zoned I-2 General Industrial, rail served. Plot plan available on our website www.pmi-auction.comBUILDING 1: • Crane served production area of 32,920 sq. ft.• Divided into (4) main bays with 5 T. top running, pendant

controlled overhead bridge cranes• Depressed full length truck/rail loading cross-bay• Ceiling heights up to 30'+• Numerous skylights providing abundant natural lighting• Heavy electrical service• Forced air gas heating• Detached compressed air facilities• 500 sq. ft. office facilitiesBUILDING 2: • 3,000 sq. ft. high bay storage warehouse

No Buyer’s Premium – Onsite Bidding Only For Real Estate

2AVAILABLE

6 7

150' STAINLESS FREE STANDING TOWER, never installed. DRAWINGS AND SPECIFICATIONS AVAILABLE ON REQUEST.

MILD STEEL FLAT MATERIAL

STEEL PLATE AND STORAGE RACK

JOY 25 HP TANK MOUNTED ROTARY SCREW AIR COMPRESSOR

20' “CONNEX” SHIPPING CONTAINERS

GALVANIZED TOWER GUY WIRE

RAW MATERIALHUGE ASSORTMENT OF STRUCTURAL STEEL INCLUDING ANGLES from 1-3/4" x 1-3/4" x 3/16" up to 6" x 4" x 3/8" and 6" x 4" x 1/2"; WIDE SELECTION OF HEAVY WALL PIPE in lengths up 30' and diameters up to 10-3/4" x 1/2" wall; (2) REELS OF 4" DIA. SEALTITE CABLE WAY; (NEW) GALVANIZED GUY WIRE on spools; WIDE ASSORT-MENT OF HEAVY STEEL PLATE up to 4" thk., in various sizes; TONS OF STRUCTURAL AND TUBULAR SCRAP STEEL, LARGE SCRAP OPPORTUNITY; LARGE SELECTION OF STEEL PLATE up to 11" x 1/2" cap.; LARGE STEEL ANGLE PLATE; LARGE CAPACITY STEEL VEE-RESTS; HUGE ASSORTMENT OF STEEL PLATE up to 4" cap. in vertical steel rack.

MISCELLANEOUS SHOP & WAREHOUSE EQUIPMENT

ASSORTED STAND LIGHTS; MANUAL ROD AND PIPE BENDER mtd. to H.D. steel base; C-CLAMPS; FORGED C-CLAMPS; 8' SQUARE DRAFTING TABLE w/parallel; (2) JET 8" BENCH GRINDERS; H.D. COLUMBIA BENCH VISES; TILTING FIXTURES; MORSE TAPER DRILLS; DRILL PRESS VISES; H.D. INGERSOLL RAND RIGHT ANGLE PNEU-MATIC GRINDERS; PNEUMATIC DRILLS; CHIPPING HAMMERS; NEEDLE SCALERS; COMBINATION WRENCHES; HAMMERS; VISE GRIPS; END WRENCHES; LARGE QTY. OF THREADED STEEL CONDUIT up to 3" dia.; ASSORTED HIGH CAPACITY KEROSENE TORPEDO HEATERS; EXTENSION CORDS; AIR HOSE; (2) ROYERSFORD 22" H.D. DRILL PRESSES; SET OF H.D. 46"L. STEEL HORSES; SET OF H.D. 29"L. STEEL HORS-ES; SET OF H.D. 49"L. STEEL HORSES; SET OF H.D. WELDED STEEL HORSES; LARGE SELECTION OF MORSE TAPER SHANK DRILLS up to 2-1/2" dia.; BENCH GRINDER; HUGE ASSORTMENT OF NUMBER AND LETTER STAMPS; PIPE WRENCHES; VISE GRIP WELDING CLAMPS; RIGHT ANGLE GRINDERS; DIE GRINDERS; OLIVER DRILL GRINDER; BUFFALO BENCH MOUNTED DRILL PRESS; LARGE ENERPAC PORTABLE HYDRAULIC POWER SUPPLY w/assorted jack heads.

AIR COMPRESSORS(2) CURTIS MDL. CW89A13382A 2-STAGE RECIPROCATING, 20 HP motor, S/N 11D0-4 0004AP, S/N N/A.JOY TWISTAIR MDL. TA025T2-2 ROTARY SCREW, 25 HP motor, tank mtd., S/N 91347.RECIPROCATING, approx. 10 HP motor, receiver tank, caster mtd.

TANKS56"L. X 68"W. X 33" DP. w/GPI fuel pump unit and fuel nozzle.

56"L. X 68"W. X 33" DP., Emco fuel nozzle and hand pump.

(2) 56"W. X 135"L. X 36" DP., GPI elec. fuel pump and fuel nozzle.

WINCHESROUGHNEK GASOLINE POWERED PORTABLE WINCH w/Honda gas pwrd. engine, pendant control, sgl. drum.

MILE MARKER MDL. 70-52000C HYDRAULIC WINCH SYSTEM, S/N D5170 (new in box).

TOUGH STUFF 12,500 LB. CAP. 4-WHEEL DRIVE WINCH, elec. drive (in box).

MISCELLANEOUS MATERIAL HANDLING EQUIPMENT

(6) GALBREATH 1-1/2 YD. SELF-DUMPING HOPPERS w/crane lugs; (2) 48"W. TUBULAR STEEL LEG H.D. HORSES; (4) 39"W. H.D. TUBULAR LEG STEEL HORSES; 65"W. H.D. TUBULAR LEG STEEL HORSES; APPROX. (50 PCS.) STACKABLE STEEL ANGLE STORAGE RACKS, heavy tubular design; FORKLIFT BOOM; CANTILEVER STEEL STORAGE RACKS; APPROX. (15) SECTIONS H.D. ADJ. PALLET RACKING; ASSORTED STEEL PLATFORMS AND STANDS; COLLAPS-IBLE WIRE BASKETS; WIDE ASSORTMENT OF CHAINS INCLUDING HOOK STYLE MULTI-LEG CHAIN, HEAVY DUTY PLATE CLAMPS up to 6" cap.; 2-WHEEL DOLLIES; PALLET JACKS; BATTERY CHARGERS; MARTIN DECKER 10,000 LB. CAP. MDL. SU18B-0200 CRANE SCALE w/stand, S/N 2830; ASSORTED SCAFFOLDING; JACK STANDS; ROLLER MATERIAL SUPPORT STANDS; WIDE ARRAY CROSBY SHACKLES.

CONNEX STORAGE CONTAINERS(2) 20' SHIPPING CONTAINERS, (1) container is converted into a 2-office shop office, (1) standard 20' storage container currently employed as indoor storage unit in good condition.

On-Site Bidding in Pine Forge, Pennsylvania or Bid Via Webcast at

GALVANIZED TOWER COMPONENTS

UNUSED

6 7

>FORD MDL. F450 “SUPER DUTY"

DIESEL STAKE BED TRUCK

MACK YARD TRUCK AND TRAILER KAWASAKI 4X4 DIESEL MULE

AUCTION

FORKLIFTSCLARK MDL. C500Y-155P, new 2006, diesel engine, 15,500 lb. @ 24" load center, 2-stage see-through mast, 137" max. lift, 96" forks, 72"W. fork carriage, dual front solid tires, S/N Y1015-631-5066CB.HYSTER MDL. H120SM, new 2006, diesel engine, 9,000 lb. cap. @ 24" load center, 135" load height, 48" forks, 60" fork carriage, Cascade pwr. fork positioner, large dia. cush-ion tires, 2,935 H.O.M., S/N L005V08463D.DATSUN MDL. FG107, diesel engine, 8,000 lb. cap. @ 24" load center, 2-stage mast, 147" max. lift, 60" forks, 58"W. fork carriage, large dia. cushion tires, S/N FG107-06204.WHITE MDL. A60H, LP engine, 111" max. lift height, 6,000 lb. cap. @ 24" load center, large dia. cushion tires, S/N 5600364.ALLIS CHALMERS MDL. FT20-24, gasoline engine, 2,000 lb. cap. @ 24" load center, 2-stage mast, 106" max. lift, 36" forks, cushion tires, S/N 44667000.

GALION 15 T. CAP ROUGH TERRAIN CRANE DATSUN 8,000 LB. CAP. GASOLINE FORKLIFT

ROUGH TERRAIN CRANEGALION MDL. 150FA, Detroit diesel engine, 15 T. max. load, 60' 4-section hyd. boom, hyd. outriggers, 14.00-24TG rough terrain tires, fully enclosed cab, 4-wheel steering, S/N 20903.

SEE REAL ESTATE PAGE 5

VEHICLESFORD MDL. F450XL SUPER DUTY, new 2008, V8 pwr. stroke, diesel engine, auto. trans., 12'-6" stake bed, steel surround, toolboxes, Odo: 19,037.5 miles, PA License YFT9741, VIN IFDX-F47R38EE18846.MACK DIESEL YARD TRACTOR, 35,000 lb. G.V.W.R., manual trans., air brakes, external battery charge and block heater ports, VIN F747ST1218.FORD MDL. 350 LARIAT PICKUP TRUCK, auto. trans., currently unlicensed, VIN 2FTJW36G3K-CA94752.(2) KAWASKI MULE 2510 UTILITY VEHICLES, diesel engine, 2-spd. trans., 48" x 53" dump bed, rough terrain nobby tires.16'L. X 92"W. BIG TEX TANDEM AXLE TRAILER, tubular steel surround, tandem axle, slide-out ramps, PA License PT0759B, VIN 16VPX1628R-1E53385.40' FLATBED YARD TRAILER, expanded metal steel deck, stake pockets and rub rails, tandem axle, PA License TM24610.

AUCTION: THURSDAY,

OCTOBER 10 10:00 A.M.

INSPECTION: Wednesday, Octobr 9, 9:00 A.M. to 4:00 P.M. & Morning of Sale

CLARK 15,500 LB. CAP. DIESEL FORKLIFT HYSTER MDL. H-120SM 9,000 LB. CAP. DIESEL FORKLIFT

PWR. FORKS

2008

2006

2AVAILABLE

2006

QS-0018709

P.O. Box 19100Houston, TX 77224-9100

DATED MATERIAL – PLEASE DELIVER

COMPLETE TALL TOWER

MANUFACTURING FACILITY

Featuring: Late Model Peddinghaus Anglematic Lines; Wide Array of Fabricating Machinery; Late Model Welding Equipment; Material Handling Equipment; Huge Quantity

of Raw Materials; Much, Much More! Plus Real Estate to Be Auctioned Subject to Confirmation of the High Bid – See Page 5

PINE FORGE (Pottstown Area), PENNSYLVANIA

AUCTION

PUBLIC INVITEDAUCTION: THURS., OCT. 10 • 10:00 A.M.

PresortedFirst Class Mail

U.S. PostagePAID

Eugene, OregonPermit No. 17

ATTENTION: PLANT MANAGEROR EQUIPMENT BUYER

DIRECTIONSFROM PHILADELPHIA INTERNATIONAL AIRPORT: Exit airport using I-95 S and proceed approx. 5-1/2 miles. Merge onto I-476N via Exit 7 toward Plymouth Meeting and proceed approx. 16-1/2 miles. Merge onto I-76W via Exit 16B toward Valley Forge. Merge onto US-422 W via Exit 328A toward Pottstown/Swedesford Road and proceed approx. 22 miles. Merge onto PA-100 N toward Allentown. Turn right on W King Street. Turn left on Manataway Street and proceed approx. 2-1/2 miles. Manataway Street becomes Manataway Drive. Watch for auction signs.

LODGINGCOMFORT INN & SUITES....................................... (610) 326-5000SR100 & Shoemaker Road, Pottstown, PA 19464QUALITY INN ..........................................................(610) 326-670061 West King Street, Pottstown, PA 19464

FINANCE YOUR AUCTION PURCHASE

Conserve Your Cash & Increase Your Bidding PowerAuctionLea$e Provides M&E Financing With Approvals from $5,000 to $999,000

(800) 438-1470Apply Online: www.AuctionLease.com

PLANT & MACHINERY INC.

APPRAISAL DIVISIONConfidential Industrial Machinery & Equipment

Appraisals Call 1-800-282-8466

UNABLE TO ATTEND?Bid on-line in real time at TO PARTICIPATE YOU MUST:

1. Register at www.BidSpotter.com. DO IT NOW. 2. Either wire transfer, or mail a cashier’s check deposit in the amount

of $3,000 (U.S. Bidders) or $10,000 (Foreign Bidders) to: Plant & Machinery, Inc. P.O. Box 19100, Houston, TX 77224-9100 If you are using FedEx or another delivery service: 2901 W. Sam Houston Pkwy. N., Suite A-130, Houston, TX 77043, (713) 691-4401

You must be registered and have your deposit in the hands of Plant & Machinery, Inc. at least 24 hours prior to the start of the auction. Failure to register and/or failure to send your deposit to Plant & Machinery, Inc. may disqualify you from bidding. DON’T WAIT.

If you need assistance, don’t hesitate to call (713) 691-4401. ALL WEBCAST BIDS ARE SUBJECT TO A 16% BUYER’S PREMIUM.

A 13% Buyer’s Premium Will Apply On-site. A 16% Buyer’s Premium Will Apply to Webcast Bids. See Above Rules for Participation. No Buyer’s Premium on Real Estate.

Everything will be sold to the highest bidder or bidders for cash in accordance with the auctioneer’s Customary Terms of Sale, copies of which will be posted on the premises.

ALL PAYMENTS MUST BE MADE BY CASH, CASHIER’S CHECK, WIRE TRANSFER OR COMPANY CHECK WITH BANK LETTER GUARANTEEING PAYMENT TO PLANT & MACHINERY INC.

Here is an example of what your letter should be: Mr. “Customer Name” is a customer of this bank. This bank will guarantee unqualified payment to PMI on the account listed herein up to the amount of $___________. This letter is good until November 11, 2013.In default of payment of bills in full within the time therein specified, the Auctioneer in addition to all other remedies allowed by law, may retain all monies received as de-posit or otherwise, as liquidated damages. All items must be removed by the time announced at the start of the sale.

Lots not paid for and/or removed within the time allowed may be resold at public or private sale without further notice, and any deficiency, together with all expenses and charge of resale, will be charged to the defaulting purchaser.

The buyer acknowledges that he or an agent has inspected all of the assets upon which he will be bidding and/or does purchase.

Buyer agrees to accept assets purchased “AS IS,” “WITH ALL FAULTS” and “WITH REMOVAL AT BUYER’S RISK AND EXPENSE.” THE AUCTIONEER EXPRESSLY DISCLAIMS ON THE PART OF THE AUCTIONEER AS AGENT AND THE SELLER, ANY WARRANTY AS TO FITNESS OR USABILITY OF ALL THE ASSETS, AND THE BUYER EXPRESSLY WAIVES ANY CLAIM IN RESPECT TO ANY POSSIBLE FUTURE USE OF ANY ASSET PURCHASED FOR ANY PURPOSE WHATSOEVER.

The buyer does hereby assume and does agree to indemnify and hold the auction-eer harmless from any future claim which shall pertain to the fitness or use of that asset as being purchased. Riggers, movers, electricians and buyers performing work at the Auction Site must provide PMI with evidence of insurance. The insurance coverage must be at a level acceptable to PMI and to the seller. PMI reserves the right to withdraw items, alter the order of the sale, accept bids from the seller, and group lots as it may deem appropriate. This auction may include consignment items.

Although all information has been obtained from sources deemed reliable, the auc-tioneer and seller make no warranty or guarantee, expressed or implied, as to the accuracy of the information herein contained, or contained in our catalog. It is for this reason that buyers should avail themselves of the opportunity to make inspection prior to the auction. Although it is not likely, auction sales are subject to cancellation or postponement. Kindly contact auctioneer prior to attendance.

These terms and conditions may be modified or supplemented by language in the catalog available at the sale site or by announcement at the start of the sale. Bidders should be attentive to those announcements and to the catalog language.

PARTIAL TERMS & CONDITIONS