HKIE (lecture outline)mc.hkie.org.hk/Upload/Doc/403edd12-ce9b-41d3-8243... · 2013. 12. 26. ·...
Transcript of HKIE (lecture outline)mc.hkie.org.hk/Upload/Doc/403edd12-ce9b-41d3-8243... · 2013. 12. 26. ·...
1
Lecture Outline
Lecture (1) Appreciation of Welding and Cutting Processes
Duration : 2.5 Hours
� Basic operation principles, limitations and application of various welding
and cutting processes
� Consumable materials identification for captioned welding and cutting
processes
� Specific weld defects adhere to individual welding processes
2
Lecture (2) Qualification of Personnel and Approval of Welding Procedures
Duration : 2.5 Hours
� Importance of qualification of welding procedures and personnel
qualification including welders, inspectors, etc.
� Approaches to the qualification of welding procedures and personnel and
its applicable specification and range
3
Lecture (3) Weld Joint Geometry and Interpretation of Welding Symbols
Duration : 2.5 Hours
� Importance of weld joint geometry
� Distinguishes between different types welds and joints
� Terminology of various parts of welds and joints
� Different types of welding symbols
� Terminology of various parts of welding symbol
� Interpret commonly used welding symbols
4
Lecture (4) Introduction of Welding Inspection
Duration : 2.5 Hours
� Importance of welding inspection
� Basic operation principles, applications and limitations of common used
Non-Destructive Testing (NDT) and Destructive Testing (DT)
� Roles and responsibilities of welding inspector and inspection practitioner