Hilti Innovations Summer 11 Final

InnovationSummer 2011

PR 35 Rotating Laser

SCW 18-A CPC Cordless Circular

Saw

SFC 18-A CPC Compact Cordless

Drill Driver

DD 110-W Hand Held Coring System

CFS-DID Firestop Drop-In Device

Hilti. Outperform. Outlast.Hilti, Inc. (U.S.) 1-800-879-8000 www.us.hilti.com • en español 1-800-879-5000

Hilti (Canada) Corporation 1-800-363-4458 • www.hilti.ca2

TE 3000-AVR Breaker

Breaking the rules. TE 3000-AVR Breaker Break free from the hassles of pneumatic breakers and other electric tools with the new Hilti TE 3000-AVR – the breaker that promises to revolutionize the demolition market.

Hilti’s latest flagship breaker enters the market with innovations that make it the first 65 pound electro-pneumatic tool that can literally perform head to head with air breakers of the same weight. This means less set up time to get that compressor going, no annoying hoses and gasket leaks, and no more diesel thirsty compressors needed for medium to heavier duty breaking applications. Our powerful SR brushless motor provides previously unheard of power to weight ratios by eliminating the carbon brushes and copper windings that add weight to traditional motors. The Hilti TE 3000 is engineered to last and allows you to work much longer between service or repair cycles thanks to a three-chamber sealing system and active cooling design.

Test the best and break free to new levels of productivity and durability!

Technical Data TE 3000-AVRPower input 1800 W

Voltage 120 V

Hammering frequency 840 bpm

Single impact energy 50 ft-lbs

Weight 66 lbs

Dimensions (L x W x H) 32 x 24 x 8 in

Applications

• Medium- to heavy-duty demolition of concrete slabs and foundations

• Concrete removal for rebar connections and utility connections

• Asphalt and road patch work• Penetrations for pipes, electrical

boxes, HVAC, beams, etc.• Digging and tamping for

earthwork

Outperform

• Over 50 foot-pounds of impact energy results in outstanding demolition performance and productivity

• SR brushless motor delivers tremendous demolition performance while keeping weight down

• Active Vibration Reduction (AVR)achieves the lowest vibration in its class

• TE-H Polygon Self-Sharpening Chisels provide strong breaking power and stick less in concrete

Outlast

• New brushless SR motor eliminates need to replace carbon brushes and provides longer intervals between service

• Active Cooling System for the motor, electronics, and hammering mechanism keeps the tool and its casing cool for added durability

• Three-chamber sealing principle means longer lasting life with less breakdowns

• Power Conditioning System protects the motor against power surges and drains

• Supported by Hilti Lifetime Service which includes 2 year No-Cost Coverage

*

* Some limitations apply. Contact Hilti for details.

FLEET MANAGEMENT

Hilti. Outperform. Outlast.Hilti, Inc. (U.S.) 1-800-879-8000 www.us.hilti.com • en español 1-800-879-5000Hilti (Canada) Corporation 1-800-363-4458 • www.hilti.ca 3

TE 3000-AVR Breaker

Order InformationDescription Package Contents Item No.

TE 3000-AVR Performance Package Deluxe

Includes tool, tool cart, (2) TE-H28 SM 40 Pointed Chisel and (2) TE-H28 FM 40 Flat Self-Sharpening Chisel

03478183

TE 3000-AVR Performance Package

Includes tool, (2) TE-H28 SM 40 Pointed Chisel and (2) TE-H28 FM 40 Flat Self-Sharpening Chisel

03478184

TE 3000-AVR Tool Cart Tool cart for easy transport of the TE 3000-AVR

00401293



The sharper solution. TE-H Hex Connection Polygon Chisels The new TE-H (1-1/8") Hex Connection Polygon Chisels bring the innovative Hilti Self-Sharpening Polygon Chisel technology to the heavy breaker industry. These chisels fit electric and air powered demolition hammers and stand up breakers with a 1-1/8" Hex connection end and set new standards in chisel performance, durability, and working comfort.

Outperform and Outlast

TE-H Pointed Polygon Chisels• Chipping concrete and making

breaches in masonryTE-H Narrow-Flat Polygon

Chisels• Chipping edges in concreteTE-H Clay Spade Polygon

Chisels• Breaks clay and dirt

(not for concrete)TE-H Tamping Tools and

Universal Shank• Tamping and compacting

soil or ballastTE-H Wide-Flat Polygon Chisels• Heavy-duty scraping and

removing tiles from vertical and horizontal position

TE-H Pointed Polygon Chisels

Description Length Width Item No.

Pointed Chisel TE-H28P SM 40 16 in - 00417824

Pointed Chisel TE-H28P SM 50 20 in - 00417825

TE-H Clay Spade Polygon Chisels


Clay Spade Chisel TE-H28 SPI 50* 19 in 4-7/8 in 00417831

TE-H Narrow-Flat Polygon Chisels


Narrow-Flat Chisel TE-H28P FM 40 16 in 1-3/8 in 00417826

Narrow-Flat Chisel TE-H28P FM 50 20 in 1-3/8 in 00417827

TE-H Tamping Tools and Universal Shank


Universal Shank TE-H28 SS 40 16 in - 00047779

Tamping Plate TE-H28 STP 150 x 150 - 6 in x 6 in 00047781

Tamping Plate TE-H28 STP 200 x 200 - 8 in x 8 in 00047782

TE-H Wide-Flat Polygon Chisels


Wide-Flat Chisel TE-H28P SPM 8/40 16 in 3 in 00417828

Wide-Flat Chisel TE-H28P SPM 8/50 20 in 3 in 00417829

Wide-Flat Chisel TE-H28P SPMA 45* 16 in 4-7/8 in 00417830

* Minimum order quantity = 2

TE-H Polygon Chisels


TE-CX and TE-C Hammer Drill Bits

Faster drilling with more durability. TE-CX and TE-C Hammer Drill Bits Hilti takes carbide hammer drill bits to the next level by revolutionizing our best-in-class TE-CX bits.

The new Hilti TE-CX Drill Bit features a gradient carbide head that stops at nothing —not even the hardest rebar. Incorporating four rugged cutting edges, the carbide head's special design helps prevent catching or jamming on rebar to extend the life of the bit. And now the new anchor hole suitability indicator means that more accurate anchor holes can be drilled when the indicator mark is visible.

If you don’t expect to hit rebar, our TE-C line offers unparalleled drilling speed. With a contoured head and carbide blade, the TE-C Drill Bit is designed to slice through concrete and move dust away from the hole and to the surface as quickly as possible.

With these two new innovations, Hilti is putting the key to drilling productivity in your hands.

Longer lifetime. Quality carbide tip braized directly into helix extends lifetime of bit.

High durability. Two flute helix with double groove wear protector and high quality carbide tip.

Long life. New gradient carbide head.

Best-in-class anchor hole accuracy. Hassle free anchor setting as long as indicator is visible.

Highest speed, constant over lifetime. Four flutes with carbide cutting edges— optimized for dust removal.

Rebar resistant drilling. Head geometry and side cutter designed for ease of drilling.

TE-CX Hammer Drill Bit

TE-C Hammer Drill Bit


TE-CX• Rebar resistant for optimal

drilling in reinforced concrete• Hammer drilling in concrete,

reinforced concrete, masonry, and other natural materials

• Drilling anchor holes and doweling for structural work

• Anchor suitability indicator on head helps ensure trouble-free anchor installation. Holes are accurate as long as wear mark is visible.

• In unlikely event of breakage, drill bit will be replaced as long as wear mark on helix is still visible.

TE-C• Optimal for drilling in non-

reinforced concrete• Hammer drilling in concrete,

reinforced concrete when rebar can be avoided, masonry, and natural stone

• Drilling anchor holes and doweling for structural work



DD 110-W Hand Held Coring System

Sometimes smaller is better.DD 110-W Hand Held Coring SystemWith a bit capacity of up to 6-1/4" maximum and a minimum bit size of 5/16" the DD 110-W is able to complete many drilling jobs that can't be done by larger tools.

With both wet and dry coring capability the DD 110-W is the perfect fit for a variety of applications from through holes to anchor holes and on any jobsite with limited access. The DD 110-W is also ideal for indoor applications where dust control is required. When you need the power of a Hilti core drill with the compact convenience of a wet/dry hand-held system, the DD 110-W can't be beat.

Technical Data DD 110-W Power 1600 W

Speed 1 no load 500 rpm

Speed 2 no load 1060 rpm

Bit range (maximum) wet 5/16" – 6-1/4"

Bit range (maximum) dry 1" – 6"

Wet drilling Yes

Dry drilling Yes

Connection end BI Quick connect

Weight (tool only) 12.8 lbs


DD 110-W Hand Held Core Drill

Includes tool, BI chuck and water swivel in a impact-resistant plastic kit box

00249118

DD 110-W Wet/Dry Package

Includes tool, BI chuck and water swivel, dust removal adaptor and 5/8-11 (BT) adaptor for slotted dry bits, heavy-duty plastic kit box

03476075

DD 110-W Wet Bit Package

Includes tool, BI chuck and one (1) each of the following HWC bits: 2", 3" and 4", in an impact-resistant tool box

03476076

Applications

• Fast wet drilling in reinforced concrete and masonry using HWC Diamond Core Bits

• Dry drilling without dust control in masonry using HDMB Diamond Core Bits

• Optional dust control for dry masonry and non-reinforced concrete drilling using the VC 40-U Vacuum Cleaner and HDMU Diamond Core Bits

Outlast

• Optimized design for light- to medium-duty use

• BI chuck for tool-free operation which prevents damage from wrenches and hammers

• Supported by Hilti Lifetime Service which includes 2-Year No Cost Coverage

Outperform

• Wet and dry drilling for a large variety of hand-held applications

• Faster drilling using innovative HWC Core Bits

• Large application range with bits 5/16" to 6-1/4", one tool does most small jobs

• BI quick connect chuck for fast and tool-free bit changes

*


FLEET MANAGEMENT


DSH-FSC Gas Saw Floor Cart

Extend the range of your gas saw. DSH-FSC Gas Saw Floor CartOpen a "hole" new world of applications with the Hilti DSH-FSC Gas Saw Floor Cart. This heavy-duty floor cart is designed for small cutting jobs requiring the flexibility of a hand-held gas saw combined with the precision cut and performance of a larger model. Complete with a gravity-fed water container, the DSH-FSC is completely portable, while giving you the dust-suppression required on many jobs. When large walk-behind saws take too long to set up, require too much space, or are just not practical, the DSH-FSC Gas Saw Floor Cart is the workhorse that helps you get the job done.

Outperform

• Fast, straight cutting of expansion joints with less operator fatigue

• Quick set up with no tools required• Wet kit for dust control to meet local

ordinances or other requirements

Outlast

• Heavy-duty steel construction for long life

• Increased feed pressure and faster cutting due to unique design

• Dust control maximizes operator comfort and minimizes environmental impact

Technical Data DSH-FSCFor use with DSH 700 and DSH 900 Gas Saws

Weight (dry) 71.5 lbs

Rear axle Adjustable side to side, single knob, no tools

Saw mounting mechanism Single knob, no tools

Cutting depth adjustment Single lever, no tools

Throttle control Rear handle bar, saw idles when released


DSH-FSC Gas Saw Floor Cart

Includes cart, wet kit, water storage tank, splash guard

00431364

Applications

• Long and straight cuts, i.e. expansion joints in concrete

• Concrete repairs in small areas• Demolition and removal of concrete

and asphalt with a maximum depth of cut of 5-3/4" (DSH 900 16" Gas Saw)

FLEET MANAGEMENT



SCW 18-A CPC Cordless Circular Saw

Cut more, cord less. SCW 18-A CPC Cordless Circular SawWhen you need to move from application to application, one floor to the next, you need a smooth, long-running cutting machine. The SCW 18-A delivers high performance for these conditions.

Technical Data SCW 18-A CPC

Voltage 18+ V

No load speed 4000 rpm

Max cutting depth 2-1/4 in

Cutting depth at 45˚ 1-5/8 in

Angular adjustment 45 degrees

Blade diameter 6-1/2 in

Arbor 5/8 in

Dimensions (LxWxH) 15.4 x 7.8 x 9.4 in

Weight 8.6 lb


SFH, WSR & SCW 18 Volt Combo

Includes SFH 18-A, WSR 18-A & SCW 18-A, (2) B 18 2.6 Ah batteries, C 4/36 charger, operating instructions in a soft bag

03475158

SFH & SCW 18 Volt Combo

Includes SFH 18-A & SCW 18-A, (2) B 18 2.6 Ah batteries, C 4/36 charger, operating instructions in a soft bag

03475160

SCW 18-A CPC Cordless Circular Saw (2 batteries)

Includes SCW 18-A tool, (2) B 18 2.6-Ah CPC Li-Ion batteries, C 4/36 Li-Ion charger and soft bag

03474877

SCW 18-A Cordless Circular Saw

Includes SCW 18-A tool only in cardboard box 00423164

SC-C WU 6-1/2" x 5/8" Z24 A Saw Blade Pack

(10) 6-1/2" x 24 Tooth Framing Saw Blade 5/8" arbor 02005347


• Complete more work per charge• Smoother operation while ripping

8' plywood• Easy-to-read marking and easy-to-

use adjustments• Designed to cut wood and plastic• Electric blade brake

*


FLEET MANAGEMENT


SFC 18-A CPC Compact Cordless Drill Driver

Drill more, cord less. SFC 18-A CPC Compact Cordless Drill DriverThe SFC 18-A is the world's first compact cordless drill that is tough enough for a two-year wear and tear warranty. Lightweight and with more rotations per minute, the SFC 18-A is designed for professional fastening work.

Technical Data SFC 18-A CPCVoltage 18+ V

Speed 1 no load 0-600 rpm

Speed 2 no load 0-1800 rpm

Max. torque hard joint

484 in-lb

PTI torque 216 in-lb

Max. torque soft joint 247 in-lb

Number of torque settings

13-88 in/lbs with 15 settings

Chuck style Keyless, steel jaws, 1/25" to 1/2"

Dimensions (LxWxH) 7.9 x 3.6 x 9.2 in

Weight 3.7 lbOrder InformationDescription Package Contents Item No.

SFC 18-A Compact Cordless Drill Driver

Includes tool, (2) B 18 1.6-Ah CPC Li-Ion batteries, C 4/36 Li-CPC battery charger, operatinginstructions and soft bag

03474876

Battery Pack Compact B 18 C 1.6 Ah CPC

Includes 1.6 Ah Li-Ion battery 00426176

SFC 18-A tool body Includes tool only 00435848

Features and Applications

• Lightweight and compact• Long-lasting, 100% all-metal gears

for longer tool life and greater reliability

• LED lights to illuminate application area

• High-performance motor delivers impressive power and productivity

*


Unlimited Battery Replacement1

Less weightThe Hilti B 18 Compact Battery allows you to do more, with less weight. Like our standard 18 volt CPC lithium ion batteries we cover wear and tear for 2 years. This combination of less weight and long lasting performance helps increase your productivity.

B 18 C Compact Batteries allow you to stop buying batteries plus:

◼ are light-weight ◼ show state of charge ◼ are drop resistant

◼ work on all Hilti 18 volt tools2

◼ include individual cell management3

1 Unlimited battery replacement duration is 2 years under Hilti Lifetime Service and 3 years under Hilti Tool Fleet Management. Some limitations apply. Contact Hilti for details.

2 Ask your Hilti representative for details3 Provide reliable power with less weight while still protecting your cordless system from deep discharge

FLEET MANAGEMENT



SD 4500-A CPC Compact Cordless Drywall Screwdriver

Drive more, cord less. SD 4500-A CPC Compact Cordless High Speed Drywall Screwdriver and SD 4500-A18 CPC Cordless High Speed Drywall ScrewdriverStop fighting the cord and increase your productivity. Now there are two options to get the same corded performance attaching drywall. The SD 4500-A Compact is the ultimate in ergonomics best suited for interior drywall work. The SD 4500-A18 delivers the most run time, best suited for exterior work.

Technical Data

SD 4500-A Compact and SD 4500-A18

Voltage 18+ V

No load speed 0-4200 rpm

Chuck 1/4" hex socket with ball notch

retention

Lock button for constant on

Yes

Quick release chuck Yes

Silent clutch Yes

Weight 4.5 lbCompact 3.9 lb


SD 4500-A18 CPC Compact CordlessDrywall Screwdriver

Includes tool, (2) B 18 V 1.6 Ah CPC Li-Ion batteries, (1) C 4/36 charger and operating instructions in a soft Hilti tool bag

03474878

SD 4500-A18 Compact Kit andSMD 50 Magazine

Includes tool, (2) B 18 V 1.6 Ah CPC Li-Ion batteries, (1) SMD 50 Magazine, (1) C 4/36 chargerand operating instructions in a soft Hilti tool bag

03474879

Battery Pack Compact B 18 C 1.6 Ah CPC

Includes 1.6 Ah Li-Ion battery 00426176

SD 4500-A18 CPC Cordless DrywallScrewdriver

Includes tool, (2) B 18 V 2.6 Ah CPC Li-Ion batteries, (1) C 4/36 charger and operating instructions and choice of soft bag or impact-resistant plastic tool box

03468772

SD 4500-A18 Kit and SMD 50 Magazine

Includes tool, (2) B 18 V 2.6 Ah CPC Li-Ion batteries, (1) SMD 50 Magazine, (1) C 4/36 charger and operating instructions in a soft Hilti tool bag

03468904


• World's first cordless drywall screwdrivers capable of serial production

• 4,200 rpm for the power to run at corded performance

• Innovative directional venting helps prevent drywall dust from blowing into the operator's face

• SD 4500-A Compact for ultimate in ergonomics and balance

• SD 4500-A18 for the ultimate in run time

*


Tool body*


Batteries & charger

FLEET MANAGEMENT


FLEET MANAGEMENT

SD 4500 High Speed Drywall Screwdriver

Productivity with collation. SD 4500 High Speed Drywall Screwdriver with SMD 50 MagazineThe SD 4500 is the perfect screwdriver for hanging drywall, exterior sheathing and metal framing. And when combined with the SMD 50 magazine, this high-powered screwdriver will also drive your productivity with increased speed and minimized waste.

With the SD 4500 High Speed Drywall Screwdriver it is as simple as drive and done.

Technical Data SD 4500Voltage 120 V

Rated input 740 W

Nominal current 6.5 A

No load speed 0-4500 rpm

Max. torque 84 in-lb

Dimensions (L x W x H) 11.4 x 2.9 x 6.3 in

Weight 3.1 lb


SD 4500 or SD 2500 and SMD 50 Magazine

Includes choice of corded screwdriver with magazine 03439762

SMD 50 Screw Magazine

Use with SD 4500, SD 2500, SD 4500-A18, or SD 4500-A Compact

00423035

SD 4500 15' Screwdriver Value Edition

Includes long & short depth gauges plus 2" & 3" bit holders

03444979

SD 4500 120V 15' Drywall Screwdriver

Includes tool (15 ft cord) in a cardboard box 00285698

SD 4500 50' Screwdriver Value Edition

Includes long and short depth gauges plus 2" & 3" bit holders

03444980

SD 4500 120 V 50' TL Drywall Screwdriver

SD 4500 50 ft twist lock cord 00285699

SD 4500 50' Screwdriver Twist Lock Value Edition

Includes long & short depth gauges plus 2" & 3" bit holders

03444981


• High speed installation with one hand

• Superior handling due to balanced, lightweight design with comfortable grip

• Standard 15 foot cord, with an available 50 foot or 50 foot Twist Lock cord version

• Innovative air outlet helps prevent dust from blowing into the operator’s face

*




Versatility that works for you. PR 35 Rotating LaserIndoors and out, vertical and horizontal, slopes and right angles – the versatile Hilti PR 35 Rotating Laser does it all. With this new tool, alignment, checking verticals, squaring and transferring heights all become jobs for just one person. Much more than the sum of its parts, this laser has been designed for maximum convenience and efficiency in use. With its two-way wireless communication, high-accuracy and rugged design, the PR 35 Rotating Laser clearly sets itself apart.

Technical Data PR 35Laser class Highly visible (red) laser, 635 nm, Class II

Operating range with PRA 35 Remote Control/Laser Receiver

6 ft-6 in - 980 ft (2m - 300m) Diameter

Slope range 15%

Remote control range 300' (100m)

Operation time with Li-Ion battery 30 h

IP protection IP 56


PR 35 Rotating Laser Kit

Includes tool, PRA 35 remote control/laser receiver, PRA 80 laser receiver holder, PRA 84 battery pack, PRA 85 mains adapter, PRA 51 target plate, operating instructions, producer certificates, and AA batteries (for the PRA 35 remote control/laser receiver)

00426380

PRA 750 Batter Board Adapter

Includes batter board adapter and operating instructions

00435441

PRA 751 Batter Board Receiver Holder

Includes batter board receiver holder and operating instructions

00435442

PRA 760 Facade Adapter

Includes facade adapter and operating instructions 00435439

Applications

• Easily create control lines (with help of the batter board adapter and the batter board receiver holder) using the auto align function and surveillance

• Quickly check and set slopes (up to 15%)

• Efficiently install curtain walls (with the facade adapter) using the PRA 35 Remote Control/Laser Receiver with pairing and the auto align function

Outlast

• Li-ion battery with run charge offers the ability to run the tool while charging

• Internal damping system, reinforced glass fiber housing, and four rubber handles help ensure the PR 35 performs even under the toughest jobsite conditions

• Supported by Hilti Lifetime Service which includes 2 Year No-Cost Coverage

Outperform

• Fast, one-person operation using auto alignment

• Digital offset measurement on the receiver results in significant time savings

• Digital slope measurement provides high accuracy and fast results

• Slope e-targeting creates the best slope results by electronically optimizing the position of the laser

• RF remote pairing and all-in-one remote for one person tool set-up

• Surveillance between the PR 35 and receiver for continuous monitoring and highest reliability

*


FLEET MANAGEMENT

PR 35 Rotating Laser


Drop and done. Firestop Drop-In Device CFS-DIDThe Firestop Drop-In Device CFS-DID is a simple one-step solution for firestopping through penetrations in a variety of base materials. The effortless installation can drop labor costs by as much as 95% while maintaining the outstanding level of firestop protection that you expect from Hilti. The firestop game has changed. Pre-formed devices are the future, and Hilti is here to lead the way.

Simple, quick, and correct are easy as drop and done!


• One-step firestop solution for a variety of pipe materials and diameters

• Integrated moisture and smoke seal barrier

• Simple and quick installation• Easily identifiable to building

inspectors• Solution for renovation/retrofit as

well as new construction• Buy-American compliant

Technical Data

CFS-DID

Expansion temperature

~ 356°F (> 180°C)

Expansion ratio 1:15 load expansion, load = 5g/cm3

1:40 free expansion

Temperature resistance

-4°F up to +190°F (20°C up to +88°C)

Storage tem-perature

23°F up to 122°F (-5°C up to +50°C)

Applications

• Pipe penetrations in a variety of base materials including concrete, metal deck, and hollow core floors

• Ability to install using multiple fastening options (gas actuated fastener, metal hit anchor, kwik con anchor, or expansion bolt)

Order InformationDescription For use with Core

bit sizeQty Pipe size Item No.

Drop-In Device CFS-DID 2" C 4" 1 up to 2" * 02008097

Drop-In Device CFS-DID 3" C 5" 1 3" 02008098



Drop-In Device CFS-DID 2" MD 4" 1 up to 2" * 02008251

Drop-In Device CFS-DID 3" MD 5" 1 3" 02008252

Drop-In Device CFS-DID 4" MD 6" 1 4" 02008253

Drop-In Device CFS-DID 6” MD 9" 1 6" 02015574

Drop-In Device CFS-DID 2" HC8 4" 1 up to 2" * 02008254

Drop-In Device CFS-DID 3" HC8 5" 1 3" 02008255


Drop-In Device CFS-DID 2" HC10 4" 1 up to 2"* 02008257



Drop-In Device CFS-DID 2" HC12 4" 1 up to 2" * 02008260



6" to 12" thick concrete/metal

deck

2-1/2" to 8" thick concrete/

metal deck

7-1/2" to 8-1/2" thick hollow

core

9-1/2" to 10-1/2" thick hollow core

11-1/2" to 12-1/2" thick hollow core

Firestop Drop-In Device CFS-DID

Underside View

Topside View

Lifetime Service

Hilti, Inc. (U.S.) 1-800-879-8000 www.us.hilti.com • en español 1-800-879-5000 Hilti (Canada) Corporation 1-800-363-4458 www.hilti.ca

Hilti. Outperform. Outlast.

NO COSTS

MANUFACTURER’SWARRANTY

REPAIR COST LIMIT

LIFETIME SERVICE

2 Years up to

Lifetime Lifetime

Tool Coverage Summary

Hilti tool repairWhen a tool goes down, Hilti understands your need to get it back on the job quickly. That is why we strive to repair and return your tool in 5 working days or less.

The process is simple:1. Call Hilti Customer Service (U.S. 1-800-879-8000, Canada 1-800-363-4458, Guam 1-671-646-0930, Puerto Rico 1-787-936-7060).2. Answer a few simple questions and your shipping documents/label will be faxed

or emailed to you within minutes.3. Package your tool for shipping, your shipping documents/label, the box and

give the packaged tool to your delivery person or drop it off at the nearest shipping location. Shipping methods vary depending upon region.

• 2 year No-Cost Coverage • Lifetime Repair Cost Limit • Lifetime Manufacturers

Warranty

Laser Measuring and Positioning Systems; CPC Lithium-Ion Systems; Rotary Hammer Drills; Combihammers; Demolition Hammers; Diamond Coring Systems; DG 150 Diamond Grinding System; GX 120, DX 600N, DX 462, DX 460, DX 351, DX 76, DX 36, DX 35, DX E72

• 1 year No-Cost Coverage • Lifetime Repair Cost Limit • Lifetime Manufacturers

Warranty

NiMH and NiCd Cordless Systems; Reciprocating Saws; Jig Saws; Circular Saws; 5" to 7" Angle Grinders; Screwdrivers; Impact tools; GX 100-E, DX 860, R4DWX-S; P 3500, and P 8000 Dispensers

• Lifetime Repair Cost Limit • Lifetime Manufacturers

Warranty

4-1/2" Angle Grinders; Gas Saws

No-Cost Coverage for up to 2 years

With Hilti tools you incur absolutely no repair costs for up to 2 years from the date of purchase. This includes:

• Inbound and return shipping

• Labor costs

• Repair or replacement of any defective parts as well as parts subject to wear and tear*

• Servicing when indicated by the service indicator light on the tool

• Functional check, adjustments and safety check after every repair

• One calibration per year of Hilti laser tools during the 2 year no-cost period

Lifetime Repair Cost Limit

After reaching the end of the 1 or 2 year No-Cost period, you pay a maximum of 30% of the corresponding new tool’s list price per repair. If the cost of the repair is below this limit, you only pay the actual cost of the repair.

Plus• An extended 6 month no

cost period for tools with an initial 2 year No-Cost Coverage period, and 3 months for tools with an initial 1 year No-Cost cCoverage period

• No cost inbound shipping

• No cost calibration with laser tool repairs

Lifetime Manufacturers Warranty

Hilti repairs or replaces the Hilti tool, at no cost, if there is damage to the tool due to defects in materials or workmanship.

Limitations

• No-Cost Coverage excludes damage due to abuse, or use not in accordance with the tool operator’s manual.

• Lifetime Manufacturer’s Warranty and Lifetime Repair Cost Limit offered as long as replacement parts remain available.

• Refurbished batteries may be used as a no cost replacement part.

* Pistons, spring clips and buffers for powder-actuated fastening tools are excluded from the no-cost wear and tear coverage.

Hilti, Inc. (U.S.) 1-800-879-8000 www.us.hilti.com • en español 1-800-879-5000 Hilti (Canada) Corporation 1-800-363-4458 www.hilti.ca


The latest Hilti has to offer, right at your fingertips.Order, manage your account, access the latest product information and more.

Visit the new Hilti Online

We took a good thing and made it even better. A fresh look and new navigation features make finding what you are looking for quick and easy.

www.us.hilti.comwww.hilti.ca

Become a fan.From product updates and industry news to cool videos and interactive polls, our Facebook page is the place to be to chat with other industry professionals and catch the latest breaking news from Hilti.

www.facebook.com/HiltiNorthAmerica

Watch and share.Our YouTube channel features videos of our most innovative new products and how-to demonstrations from the experts. Check it out to see the latest from Hilti.

www.youtube.com/HiltiNorthAmerica

Hilti Online


*ISO 14001 US Only

P.O. Box 21148, Tulsa, OK 74121 • Hilti, Inc. (US) 1-800-879-8000 www.us.hilti.com • en español 1-800-879-5000 Hilti (Canada) Corporation 1-800-363-4458 www.hilti.ca • Hilti is an equal opportunity employer • Hilti is a registered trademark of Hilti, Corp. ©Copyright 2011 by Hilti, Inc. • PS28 3478153 • 04/11 • SM

The data contained in this literature was current as of the date of publication. Updates and changes may be made based on later testing. If verification is needed that the data is still current, please contact the Hilti Technical Support Specialists at 1-800-879-8000. All published load values contained in this literature represent the results of testing by Hilti or test organizations. Local base materials were used. Because of variations in materials, on-site testing is necessary to determine performance at any specific site. Printed in the United States

Hilti Innovations Summer 11 Final

Documents

Transcript of Hilti Innovations Summer 11 Final