HIGH PERFORMANCE ICE AND SNOW MANAGEMENT ...Three-shield snow plow: POWER 20 One-shield snow plow:...

www.samasz.com

For professionals

HIGH PERFORMANCEICE AND SNOW MANAGEMENT EQUIPMENTTractor snow plowsTruck and utility vehicle snow plowsGritters and sweepers

Access to top quality technical equipment, conforming to high requirements is considered to be a challenge

at the designing stage. To meet these needs, we offer top quality technological solutions, based

on 30-year experience in designing agricultural equipment.

We will help to achieve your success !

Many have already trusted us. We are passionate about designing machines to meet any farmers’ needs !

30 years of experience

Three-shield snow plow: POWER 20

One-shield snow plow: PSC Safe 21

Snow plow made of polyethylene with own lifting system: POLI / POLIS 22

One-shield snow plow: PSS Safe 23

Snow blower: TORNADO 24

Tractor gritters: SAHARA / SAND / GOBI 25

Professional sand spreader: VORTEX 26

Sweepers, LIFT: MOP / Lift 27

Frames 30

TABLE OF CONTENTS Page

General characteristics of snow plows 4 - 9

One-shield snow plow: Smart / Smart K / Lite 10

V-type snow plow: CITY 11

One-shield snow plow: UNI 12

One-shield snow plow: RAM 13

V-type snow plow: PSV 14

V-type snow plow: PSV Up 15

V-type snow plow: AlpS 16

V-type snow plow: AlpS Up 17

V-type snow plow: JUMP 18

V-type snow plow: OLIMP 19

4

Inclined bars: Inclined shield:

• CITY • PSV• AlpS / AlpS Up• OLIMP• PSS SAFE / POLIS• PSC Safe

• LITE• SMART• UNI• RAM

Frame overloadprotection (sheared bolts):

• CITY• UNI• PSV• RAM• AlpS• OLIMP• JUMP

Inclined shields:

• POWER

Hydraulic overloadprotection:

• PSV (option)• AlpS (option)• OLIMP

GENERALCHARACTERISTICSOF SNOW PLOWS

SaMASZ SNOW PLOWS

From ultra light to heavy class. They are designed for winter maintenance of city streets, roads and squares, sidewalks

and avenues. The plows can be mounted on the most popular carriers (tractors, trucks, excavators - loaders, backhoe

loaders and others) owing to variety of adapters and frames to attach them.

These are only a few advantages of SaMASZ snow plows, which owing to their parameters are an optimum and economic

device indispensable in winter maintenance of any surface.

SOME FEATURES OF SNOWPLOWS:

Inclined shields:

• JUMP

Patented

www.samasz.com 5


Clearing bars:

Rubber:SMART / UNI/ CITY: 30 mm / 1.2”RAM / PSV / AlpS / JUMP / OLI MP / Power / PSC SAFE / POLI / POLIS / PSS SAFE: 50 mm / 2”

Steel:SMART / CITY / UNI: 8 mm / 0.3”RAM / PSV / JUMP: 10 mm / 0.4”AlpS / OLIMP / POWER / PSC SAFE: 12 mm / 0,5”20 mm / 0.8” on demand

Rubber - corrundum: SMART / UNI / CITY: from 40 mm / 1.6” to 50 mm / 2”RAM / AlpS / PSV / JUMP / OLIMP / POWER / PSS SAFE / POLI / POLIS / PSS SAFE: od 40 mm / 1.6” to 50 mm / 2”

Polyurethan-Vulkollan:SMART / UNI / CITY: 30 mm / 1.2”RAM / PSV / Alps / JUMP / OLIMP / POWER /PSC SAFE / POLI / POLIS / PSS SAFE: / 0.3”

KOMBI (Steel rubber - corrundum):SMART / UNI / CITY: 25mm / 1”RAM / PSV / AlpS / JUMP / OLIMP / POWER / PSC SAFE /PSS SAFE: 36 mm / 1.4”

6

The pictures show only limited mounting examples. More mounting frames are shown on page 30-31.


3-point linkage frame:

• UNI• CITY• RAM• PSV• Alps (option)• JUMP (option)• OLIMP (option)

3-point linkage hitch cat. II:

3-point linkage hitch cat. I - narrow 400 mm:

• SMART K• CITY K

DIN 76060 plate - big 3 :

• PSV Up F1 (A + B)• AlpS Up F1 (A + B)• OLIMP Up F1 (A + B)• PSS F1 (A)• Poli / PoliS F1 (A)

Mounting Types:

Different mounting frames i.e. for loaders, miniloaders, front loaders, trucks etc. can be adjusted according to customer’s needs.

• PSC Safe • AlpS (option)• JUMP (option) • OLIMP (option)• POWER

www.samasz.com 7

GENERALCHARACTERISTICSOF SNOW PLOWSStability, comfort and safety of operation:

LED clearance lights12 V lub 24 V

Support wheels SMART (200 x 50):

• SMART • CITY• UNI

Support wheels (250 x 80):

• RAM (option)• PSV (option)• Alps (option)• JUMP

• OLIMP• POWER• PSS SAFE• POLI / POLIS

Sliding skidsKüper K

Sliding skids

Snowdust protection

• SMART 5 mm/ 0.2”• CITY 5 mm/ 0.2”• PSV/AlpS 12 mm /0.5”• RAM/JUMP 12 mm /0.5”• OLIMP 12 mm /0.5”

• POWER 12 mm /0.5”• PSC SAFE 12 mm /0.5”• Poli / PoliS 12 mm /0.5”• PSS SAFE 12 mm /0.5”

Road lights

Safety flags + locks

• PSV Up• PSS Up• AlpS UP

• RAM• PSV• Alps• JUMP• OLIMP

• POWER• PSC SAFE• POLI / POLIS• PSS SAFE

• RAM• PSV• Alps• JUMP• OLIMP

• POWER• PSC SAFE• POLI / POLIS• PSS SAFE

8

STEERING

Multifunctional steering panel (MULTI) Option - CITY, PSV, AlpS, OLIMP

Steering panel PLUS Option - CITY, PSV, AlpS, OLIMP

Standard CITY, PSV, AlpS, OLIMP

synchronized left / rightadjustment

Left shield adjustment


LED lights on/off

Power / LED lights

Right shield adjustment


LED lights on/off

Right shield adjustmentLeft shield adjustment

Front/rear V-adjustment

Unsynchronized adjustmentleft/right adjustment

www.samasz.com 9

STEERINGStandard UP, PSV UP, AlpS UP, OLIMP UP, PSS SAFE, POLI / POLI S

Standard UP H PSV UP H, AlpS UP H, OLIMP UP H

Standard UP H, PSS H, PSS SAFE H, POLI H, POLIS H


Dipped lights

Parking lights

Road lights

ON/ OFF

Right shield adjustmentLowering to working position

Lifting to transport position(Lightening depends on the value shown on the manometer)

Road lights Parking lights

Dipped lights

Shield right / left

only CITY, PSV, AlpS, OLIMP


Dipped lights

Parking lights

Road lights

ON/ OFF


Lowering to working position

Lifting to transport position(Lightening depends on the value shown on the manometer)

10

ONE-SHIELD SNOW PLOW SMART, SMART K and LITE with spring protection

TE

CHN

ICA

L D

ETA

ILS

Type SMART 120 / 120 K

SMART 150 / 150 K

SMART 180 / 180 K SMART 200 SMART 220 LITE 150

Working width min./max. [cm/ft]120/102 / 3’11’’/3’4”

150/127 / 4’11”/4’2”

180/152 / 5’11’’/ 4’11’’

200/169 / 6’7’’/5’7’’

220/180 / 7’3’’/ 5’11’

150/139 / 4’11’’/ 4’7’’

Transport width min./max. [cm/ft]122/112 / 4’/3’8’’

152/137 / 4’11’’/ 4’6’’

182/162 / 5’11’’/ 5’4’’

202/179 / 6’8’’/ 5’11’’

222/196 / 7’3’’/ 6’5’’

157/145 / 5’2’’/ 4’9’’

Shield’s height [cm/ft] 64 / 2’1’’ 56 / 1’11’’

Number of the clearing bars (pcs) 1

Protection Inclined shield

Angle of attack 30° 23°

Hydraulic turning angleright and left

up tp 35° up to 27°

Needed hydraulic connectors 2 (1-pair) 2 (1-pair)

Dimensions [cm/ft]Length / width / height

68 / 122 / 76 / 2’3’’/ 4’/ 2’6’’

68 / 152 / 76 / 2’3’’/ 4’11”/ 2’6’’

68 / 182 / 76 2’3’’/ 5’11’’/ 2’6’’

68 / 202 / 76 2’3’’/ 6’8’’/ 2’6’’

68 / 222 / 76 2’3’’/ 7’3’’/ 2’6’’

58 / 157 / 61 / 1’11’’/ 5’2’’/ 2’

Weight [kg/lbs] 120 / 265 130 / 285 140 / 310 155 / 340 170 / 375 130 / 285

Standard Equipment SMARTRolled shield • Stepless hydraulic adjustment of the shield • Spring protection (4 springs) • 3 - point linkage Cat. 1 hitch • (SMART K) • Clearing bar at choice • Electric connection 12 V (lighter socket) • LED lights 12V or 24 V • Support leg • Powder painting

Only SMART K: Mounting: narrow 3 - point cat. I 400 mm

Standard Equipment LITERolled shield • Stepless hydraulic adjustment of the shield • Spring protection (2 springs / 4 springs - optional) • Hitch for municipal triangle (475 mm / 19” distance between lower links) • Ground following • Sliding skids • 2 clearing bars – rubber and steel (turnable) • LED lights 12 V or 24 V • Electric connection 12 V (lighter socket) • Support leg • Safety bumper • Powder painting

www.samasz.com 11

V-TYPE SNOW PLOWCITYwith inclined bars

TE

CH

NIC

AL

DE

TAIL

S

Type CITY 150 CITY 180 CITY 200 CITY 220

Working width min./max. [cm/ft] 150 / 132 / 4’11’’/4’4’’ 180 / 158 / 5’11’’/5’2’’ 200 / 175 / 6’7’’/5’9’’ 220 / 195 / 7’3’’/6’5’’

Transport width min./max. [cm/ft] 154 / 138 / 5’/ 4’6’’ 183 / 164 / 6’/ 5’5’’ 203 / 181 / 6’8’’/ 5’11’’ 227 / 201 / 7’5’’/ 6’7’’

Shield’s height [cm/ft] 59 / 68 / 1’11’’/ 2’3’’ 59 / 70 / 1’11’’/ 2’4’’ 59 / 72 / 1’11’’/ 2’4’’ 59 / 74 / 1’11’’/ 2’5’’

Needed hydraulic connectors 2 (1-pair)

Number of the clearing bars (pcs) 4 6

Protection Spring protection + torn off bolts on mounting frame

Angle of attack 0°

Hydraulic turning angle right and left do 30°


72 / 151 / 80 / 2’4’’/ 4’11’’/ 2’7’’

75 / 181 / 82 / 2’6’’/ 5’11’’/ 2’8’’

77 / 201 / 84 / 2’6’’/ 6’7’’/ 2’9’’

77 / 227 / 85 / 2’6’’/ 7’5’’/ 2’9’’

Weight [kg/lbs] 130 / 285 145 / 320 155 / 340 165 / 365

Standard Equipment CITY:2 independent shields • Stepless hydraulic adjustment of the shield • Inclined clearing bars • Clearing bar at choice • Ground following (only with SaMASZ frame) • Electric connection 12 V (lighter socket) • LED lights 12 V or 24 V • Support leg • Safety bumper • Powder painting

12

ONE-SHIELD SNOW PLOW UNI with spring protection

Standard Equipment UNIRolled shield • Stepless hydraulic adjustment of the shield • Spring protection (6 springs – adjustable) • Adjustable angle of attack • Ground following (only with SaMASZ frame) • Clearing bar at choice • Electric connection 12 V (lighter socket) • LED lights 12 V or 24 V • Support leg • Safety bumper • Powder painting

TE

CH

NIC

AL

DE

TAIL

S

Type UNI 180 UNI 200 UNI 220

Working width min./max. [cm/ft] 180 / 155 / 5’11’’/ 5’1’’ 200 / 170 / 6’7’’/ 5’7’’ 220 / 190 / 7’3’’/ 6’3’’

Transport width min./max. [cm/ft] 187 / 159 / 6’2’’/ 5’3’’ 207 / 176 / 6’9’’/ 5’9’’ 227 / 183 / 7’5’’/ 6’

Shield’s height [cm/ft] 80 / 2’7’’


Protection Inclined shield + Torn off bolts on mounting frame

Angle of attack from 0° to 21°

Hydraulic turning angle right and left up to 32°

Needed hydraulic connectors 2 (1 - pair)


106 / 187 / 95 / 3’6’’/ 6’2’’/ 3’1’’

106 / 207 / 95 / 3’6’’/ 6’9’’/ 3’1’’

106 / 227 / 95 / 3’6’’/ 7’5’’/3’1’’

Weight [kg/lbs] 190 / 420 200 / 440 210 / 465

www.samasz.com 13

ONE-SHIELD SNOW PLOW RAM with spring protection

Standard Equipment RAMRolled shield • Stepless hydraulic adjustment of the shield • Ground following (only with SaMASZ frame) • Clearing bar at choice • Electric connection 12 V (lighter socket) • LED lights 12 V or 24 V • Support leg • Safety bumper • Powder painting

TE

CH

NIC

AL

DE

TAIL

S

Type RAM 250 RAM 270 RAM 300

Working width min. / max. [cm/ft] 250 / 218 / 8’2’’/ 7’2’’ 270 / 235 / 8’11’’/ 7’9’’ 300 / 260 / 9’11’’/ 8’6’’

Transport width min. / max. [cm/ft] 256 / 220 / 8’5’’/ 7’3’’ 276 / 250 / 9’/ 8’2’’ 307 / 276 / 10’1’’/ 9’

Shield’s height [cm/ft] 75/85 / 2’6’’/2’9’’


Protection Inclined shield + Torn off bolts on mounting frame

Angle of attack 30°




106 / 258 / 107 / 3’6’’/ 8’6’’/ 3’6’’

106 / 278 / 107 / 3’6’’/ 9’1’’/ 3’6’’

106 / 308 / 107 / 3’6’’/ 10’1’’/ 3’6’’

Weight [kg/lbs] 280 / 620 300 / 660 330 / 730

14

V-TYPE SNOW PLOW PSV with inclined clearing bars

Standard Equipment PSV 2 independent shields • Stepless hydraulic adjustment of the shield • Inclined clearing bars • Clearing bar at choice • Ground following (only with SaMASZ frame) • Electric connection 12 V (lighter socket) • LED lights 12 V or 24 V • Support leg • Safety bumper • Powder painting

TE

CH

NIC

AL

DE

TAIL

S

Type PSV 161 PSV 181 PSV 201 PSV 231 PSV 251 PSV 271 PSV 301

Working width min./ max. [cm/ft]163 / 153 /

5’4’’/ 5’183 / 160 /

6’/ 5’3’’203 / 180 / 6’8’’/ 5’11’’

233 / 202 / 7’8’’/6’8”

253 / 225 / 8’4”/ 7’5’’

273 / 235 / 8’11’’/ 7’9’’

303 / 262 / 9’11’’/8’7”

Transport width min. / max. [cm/ft]177 / 157 / 5’11’’/ 5’2’’

197 / 176 / 6’6’’/5’9”

217 / 193 / 7’1’’/ 6’4’’

247 / 222 / 8’1’’/ 7’3’’

267 / 238 / 8’9’’/ 7’11’’

287 / 256 / 9’5’’/ 8’5’’

317 / 282/10’5’’/ 9’3’’

Shield’s height [cm/ft]80 / 90 / 2’7’’/ 2’11’’

80 / 91/ 2’7’’/ 2’11’’

80 / 93/ 2’7’’/ 3’1’’

80 / 94/ 2’7’’/ 3’1’’

80 / 95/ 2’7’’/ 3’1’’

80 / 96/ 2’7’’/ 3’2’’

80 / 98/ 2’7’’/ 3’3’’


Protection Spring protection + torn off bolts on mounting frame

Angle of attack 0°


up to 30°


Dimensions [cm/ft]Length / width

97 / 175 / 3’2’’/ 5’9’’

99 / 195 / 3’3’’/ 6’5’’

100 / 215 / 3’3’’/ 7’

100 / 245 / 3’3”/8’

103 / 265 / 3’5’’/ 8’8’’

103 / 285 / 3’5’’/ 9’4’’

103 / 315 / 3’5’’/ 10’4’’

Weight [kg/lbs] 230 / 505 245 / 540 260 / 575 300 / 660 355 / 780 370 / 815 410 / 900

www.samasz.com 15

V-TYPE SNOW PLOW PSV UP with inclined clearing bars and own lifting system

Standard Equipment PSV UpOwn lifting system • 2 independent shields • Stepless hydraulic adjustment of the shield • Inclined clearing bars • Ground following• Clearing bar at choice • Electric connection 12 V (lighter socket) / Electric connection 24 V (version with hydraulic pump) • Road lights • LED lights 12 V or 24 V • Lightening • Manometer • Support leg • Safety bumper • Powder painting

PSV Up H: Own hydraulic unit + oil pump + steering panel STANDARD UP H (24 V)

TE

CH

NIC

AL

DE

TAIL

S

Type PSV 231 Up PSV 251 Up PSV 271 Up PSV 301 Up PSV 231 Up H PSV 251 Up H PSV 271 Up H PSV 301 Up H

Working width min./max. [cm/ft]

233 / 202 / 7’8’’/6’8”

253 / 225 / 8’4”/ 7’5’’

273 / 235 / 8’11’’/ 7’9’’

303 / 262 / 9’11’’/8’7”

233 / 202 / 7’8’’/6’8”

253 / 225 / 8’4”/ 7’5’’

273 / 235 / 8’11’’/ 7’9’’

303 / 262 / 9’11’’/8’7”

Transport width min./max. [cm/ft]

247 / 222 / 8’1’’/ 7’3’’

267 / 238 / 8’9’’/ 7’11’’

287 / 256 / 9’5’’/ 8’5’’

317 / 282/10’5’’/ 9’3’’

247 / 222 / 8’1’’/ 7’3’’

267 / 238 / 8’9’’/ 7’11’’

287 / 256 / 9’5’’/ 8’5’’

317 / 282/10’5’’/ 9’3’’

Shield’s height [cm/ft]80 / 94/ 2’7’’/ 3’1’’

80 / 95/ 2’7’’/ 3’1’’

80 / 96/ 2’7’’/ 3’2’’

80 / 98/ 2’7’’/ 3’3’’

80 / 94/ 2’7’’/ 3’1’’

80 / 95/ 2’7’’/ 3’1’’

80 / 96/ 2’7’’/ 3’2’’

80 / 98/ 2’7’’/ 3’3’’

Mounting type Municipal plate EN 15432 F1+F2, DIN 76060. Size 3 A + B

Number of the clearing bars (pcs)

2 4 2 4

Protection Inclined clearing bars

Angle of attack 0°


up to 30°

Needed hydraulic connectors

4 (2 - pair) Power 24 V


134 / 245 / 151 147 / 267 / 154 146 / 285 / 151 148 / 315 / 151 134 / 245 / 151 147 / 267 / 151 146 / 285 / 151 148 / 315 / 151

Weight [kg/lbs] 450 / 990 505 / 1115 520 / 1145 555 / 1225 520 / 1145 575 / 1265 585 / 1290 630 / 1390

16

V-TYPE SNOW PLOW AlpS with inclined clearing bars

Standard Equipment AlpS2 independent shields • Stepless hydraulic adjustment of the shield • Inclined clearing bars • hydraulic overload protection from 361 type • Clearing bar at choice • Ground following (only with SaMASZ frame) • Electric connection 12 V (lighter socket) • LED lights 12 V or 24 V• Sup-port leg • Safety bumper • Powder painting

TE

CH

NIC

AL

DE

TAIL

S

Type AlpS 271 AlpS 301 AlpS 331 AlpS 361 AlpS 401

Working width min. / max. [cm/ft] 270 / 255 300 / 263 330 / 305 360 / 318 400 / 347

Transport width min. / max. [cm/ft] 285 / 255 315 / 282 346 / 308 377 / 335 413 / 371

Shield’s height [cm/ft] 98 / 108 98 / 110 98 / 112 98 / 113 98 / 115


ProtectionInclined clearing bars + Torn off bolts on mounting frame

(only in plows mounted on frames) and hyd. overload protection from type 361

Angle of attack 0°




135 / 285 / 110 135 / 315 / 113 135 / 345 / 116 135 / 375 / 123 135 / 415 / 123

Weight [kg/lbs] 650 730 800 865 900

www.samasz.com 17

V-TYPE SNOW PLOW AlpS UP with inclined clearing bars and own lifting system

Standard Equipment AlpS UpOwn lifting system • 2 independent shields • Stepless hydraulic adjustment of the shield • Inclined clearing bars • Hydraulic overload pro-tection • Clearing bar at choice • Ground following • Electric connection 12 V (lighter socket)/Electric connection 24 V (version with hydraulic pump) • Road lights • LED lights 12 V or 24 V • Lightening • Manometer • Support leg • Safety bumper • Powder painting

Only AlpS Up H: Own hydraulic unit + oil pump + steering panel STANDARD UP H (24V)

TE

CH

NIC

AL

DE

TAIL

S

Type AlpS 271 Up AlpS 301 Up AlpS 331 Up AlpS 271 Up H AlpS 301 Up H AlpS 331 Up H

Working width min./max. [cm/ft] 250 / 270 300 / 263 330 / 290 250 / 270 360 / 318 400 / 347

Transport width min./max. [cm/ft] 285 / 250 315 / 282 346 / 308 285 / 250 315 / 282 346 / 308

Shield’s height [cm/ft] 104 / 110 98 / 110 98 / 112 104 / 110 98/ 110 98 / 112

Mounting type Municipal plate EN 15432 F1+F2, DIN 76060. Size 3 A + B


Protection Inclined clearing bars+ Hyd. overload protection

Angle of attack 0°


Needed hydraulic connectors 4 (2 - pair) Power 24 V

Dimensions [cm/ft]Length / width / height [cm/ft]

129 / 270 / 118 315 / 113 / 135 345 / 116 / 135 129 / 270 / 118 315 / 113 / 135 345 / 116 / 135

Weight [kg/lbs] 815 880 900 870 935 960

18

TE

CH

NIC

AL

DE

TAIL

S

Type JUMP 280

Working width min./max. [cm/ft] 280 / 198

Transport width min./max. [cm/ft] 292 / 210

Shield’s height [cm/ft] 122 / 107


Protection Inclined clearing bars + torn off bolts on mounting frame and hydraulic overload protection

Angle of attack up to 35°




140 / 290 / 115

Weight [kg/lbs] 530

SNOW PLOWJUMP 280

Standard Equipment JUMPPolyethylene shield joint with 3 - section steel clearing bars • Stepless hydraulic adjustment of the shield • Exceptional spring protection • clearing bar at choice • Protection against snow throwing • Electric connection 12 V (lighter socket) • LED lights 12 V / 24 V • support leg • safety bumpers • powder painting

www.samasz.com 19

Standard Equipment OLIMP2 independent shields • Stepless hydraulic adjustment of the shield • Inclined clearing bars • Hydraulic overload protection • 3 - point linkage hitch Cat. II • Clearing bar at choice • Ground following (only with SaMASZ frame) • Electric connection 12 V (lighter socket) • LED lights 12 V or 24 V • Protection against snow throwing • Support leg • Safety bumper • Powder painting

V - TYPE SNOW PLOW OLIMP with inclined clearing barsand hydraulic overload protection

TE

CH

NIC

AL

DE

TAIL

S

Type OLIMP 300 OLIMP 330 OLIMP 300 Up OLIMP 300 Up H

Working width min./max. [cm/ft] 263 / 300 290 / 330 263 / 300 263 / 300

Transport width min./max. [cm/ft] 315 / 285 345 / 312 315 / 285 278 / 320

Shield’s height [cm/ft] 118 / 132 118 / 134 118 / 132 118 / 132


ProtectionInclined clearing bars + Hyd. overload protection + Torn off bolts in mounting frame

(only in version with mounting frame

Mounting type - - Municipal plate EN 15432 F1+F2 (DIN 76060 Size 3 -A+B)

Angle of attack 0°



Dimensions [cm/ft] Length / width / height 135 / 315 / 140 135 / 345 / 142 135 / 315 / 140 135 / 315 / 140

Weight [kg/lbs] 900 925 1050 1105

Only Up: Own lifting system + steering panel STANDARD UP (24V)Only UpH: Own hydraulic unit + oil pump + steering panel STANDARD UP H (24 V)

20

THREE-SHIELD SNOW PLOWPOWERwith inclined shields

Standard Equipment POWERRolled shield • Separate shields • Stepless hydraulic adjustment of the shield • Inclined shield (3 parts) • 3-point linkage hitch Cat. II • Clearing bar at choice • Protection against snow throwing • Electric connection 12 V (lighter socket) • LED lights 12 V or 24 V • Support leg • Safety bumper • Powder painting

TE

CH

NIC

AL

DE

TAIL

S

Type POWER 330 C

Working width min. / max. [cm/ft] 331 / 286

Transport width min. / max. [cm/ft] 335 / 300

Shield’s height [cm/ft] 125


Protection Inclined shield (3 parts)





194 / 335 / 150

Weight [kg/lbs] 970

www.samasz.com 21

ONE-SHIELD SNOW PLOW PSC SAFE with inclined clearing bar

Standard Equipment PSC SafeRolled shield • Stepless hydraulic adjustment of the shield • Inclined clearing bar • 3 - point linkage hitch Cat. II • Clearing bar at choice • Protection

against snow throwing • Electric connection 12 V (lighter socket) • LED lights 12 V or 24 V • Support leg • Safety bumper • Powder painting

TE

CH

NIC

AL

DE

TAIL

S

Type PSC 302 Safe PSC 332 Safe

Working width min./max. [cm/ft] 300 / 265 330 / 290

Transport width min./max. [cm/ft] 314 / 300 344 / 330







Dimensions [cm/ft]Length / width / height 315 / 152 / 98 354 / 152 / 98

Weight [kg/lbs] 700 720

22

SNOW PLOW POLI / POLISmade of polyethylene with own lifting systemStandard Equipment POLI / POLIS8 mm HDPE polyethylene • Stepless hydraulic adjustment of the shield • Hitch – Municipal plate EN 15432 F1 + F2, DIN 76060 • Clearing bar at choice • Electric connection 24 V • Version with hydraulic pump additionally equipped with steering panel • Road lights • LED lights 24 V • Support leg • Safety bumper

Tylko PoliS: Inclined clearing bars tension force adjustmentOnly POLI H / POLIS H: Steering panel and hydraulic system with oil pump

TE

CH

NIC

AL

DE

TAIL

S

Type Poli 270 / H Poli 300 / H Poli 330 / H PoliS 300 / H

Working width min./max. [cm/ft] 270 / 245 300 / 275 330 / 305 300 / 275

Transport width min./max. [cm/ft] 283 / 270 313 / 300 343 / 330 313 / 300


Mounting type Plate EN 15432 F1 + F2, DIN 76060 Size 3 A + B

Protection Deflected shield Deflected shield and inclined clearing bars



Needed hydraulic connectors version wothout H

4 (2 - pair) (POLI H)

Electric power supplyversion with H

Power 24 V


Dimensions [cm/ft]Length / width / height [cm/ft]

177 / 283 / 109 177 / 314 / 109 177 / 343 / 109 177 / 314 / 109

Weight [kg/lbs] 400 420 / 520 430 / 532 420 / 520

www.samasz.com 23

ONE-SHILED SNOW PLOW PSS SAFE for trucks with inclined clearing barStandard Equipment PSS SafeOwn lifting system • Rolled shield • Stepless hydraulic adjustment of the shield • Inclined clearing bar (only PSS Safe) • Plate EN 15432 F1 + F2, DIN 76060 • Clearing bar at choice • Electric connection 24 V • Road lights • LED lights 12 V or 24 V • Protection against snow throwing • Support leg • Safety bumper • Powder painting

Tylko PSS Safe H: • Own hydraulic unit + oil pump + steering panel STANDARD UP H (24 V)

TE

CH

NIC

AL

DE

TAIL

S

Type PSS 302 Safe / H

Working width min. / max. [cm/ft] 300 / 265

Transport width min. / max. [cm/ft] 314 / 300


Mounting type Płyta EN 15432 F1 (DIN 76060 - A)





Needed hydraulic connectors version without H

4 (2 - pair) (PSS without H),Power 24 V

Electric power supplyversion with H

Power 24 V -connection to accumulator


178 / 315 / 98

Weight [kg/lbs] 790 / 810

24

SNOW BLOWER TORNADO

Standard Equipment TORNADOHydraulic adjustment of blowing tube and blowing distance • Steered clearing bar with perforated part • 3 - point linkage hitch

Cat. II • Built - in overload clutch • Adjusted to left and right rotation of PTO • PTO shaft

TE

CH

NIC

AL

DE

TAIL

S

Type Tornado 200 Tornado 251

Working width [cm/ft] 200 250

Transport width min. / max. [cm/ft] 200 250

Working height 90 90

Number of rotors 1


Tractor’s power [HP] up to 80 up to 90

RPM 540 / 1000

Working speed up to 3 km / h

Snow blowing direction (hydraulically regulated) 360°

Distance of throwing (m) up to 10 up to 10

Dimensions [cm/ft] Length / width / height 142 / 205 / 210 142 / 255 / 210

Weight [kg/lbs] 680 760

www.samasz.com 25

SAND SPREADERSSAHARASANDGOBI

SANDSAHARA GOBI 100 GOBI 140

TE

CH

NIC

AL

DE

TAIL

S

Type Sahara 140 Sahara 200 Sahara 240 Sand 400 Sand 600 Gobi 100 Gobi 140 Gobi 140 H

Working width [cm/ft] 140 200 240 up to 300 up to 300 100 140 140

Transport width [cm/ft] 164 224 264 92 125 118 156 156

Needed hydraulic connectors 4 (2 x 2 pary) - - - - -

Mounting type 3-point plinkage cat. II Drawbar lower links of 3 - point linkage cat. II

Tractor’s power [HP] from 50 from 40 from 15 from 50

Working speed [km / h] 15 9 15

Max. transport speed [km / h] 25

Oil demand [l / min.] 10 - 40 - - - - 10 - 40

Oil pressure [bar] 150 - - - - 150

Capacity [m3] 0,50 1,40 1,60 0,32 0,40 0,40 1,5 1,5


90 / 164 / 105 130 / 224 / 130 130 / 264 / 130 91 / 146 / 128 124 / 146 / 130 179 / 180 / 97 265 / 156 / 153 265 / 156 / 153

Weight [kg/lbs] 285 620 690 105 130 185 550 600

Weight with sand [kg/lbs] up to 1075 up to 2900 up to 3500 up to 500 up to 730 up to 850 up to 3000 up to 3050

26

Standard Equipment VORTEXPTO shaft • Safety bar • Safety cover (curtain) • Spreading regulation • Inspection window • Powder painting

PROFESSIONAL SAND SPREADER VORTEX

Steering panel in standard equipment

TE

CH

NIC

AL

DE

TAIL

S

Type VORTEX 600 VORTEX 600 E

Working width [m] 1,5 - 8

Transport width min. / max. [cm/ft] 100 / 126 / 130

Attachment 3 - point linkage cat. II

Tractor’s power [HP] up to 60

max. working speed [km / h] up to 12 km / h

max. transport speed [km / h] up to 25 km / h

Capacity [dm3] 600 - 1000 * (option)

Dimensions [cm/ft] Length / width / height 100 / 126 / 130

Weight [kg/lbs] 200

EUR NET PRICE $ 5 500(mechanical steering)

$ 6 600(electric steering)

Agitator for gravel / salt 1065 / 00 - 02 - 400 $ 225

Agitator for stones 1065 / 00 - 02 - 300 $ 145

Agitator for sand 1065 / 00 - 02 - 000 $ 440

www.samasz.com 27

SWEEPERS MOPUNIVERSAL LIFT

Steering panel in standard equipment

TE

CH

NIC

AL

DE

TAIL

S

Type LIFT 70

Working stroke [cm/ft] 70

Permissible lift capacity [kg/lbs] 1500

Nominal pressure of hydraulic unit [Mpa] 16

Working speed [km/h] up to 10

Height [cm/ft] max. 186 min. 135

Dimensions [cm/ft] Length / width 90 / 45

Weight [kg/lbs] 240Lift

MOP

TE

CH

NIC

AL

DE

TAIL

S

Tractor sweeper - Type MOP 120 MOP 140 MOP 160 MOP 200

Working width [cm/ft] 120 140 160 200

Brush rpm 140 - 160

Brush diameter [cm/ft] 60

Working speed [km/h] bis 10

Litter container’s capacity [dm3] 70 90 130 170

Dimensions [cm/ft] Length / width / height

140 / 140 / 114 160 / 140 / 114 180 / 140 / 114 200 / 140 / 114

Weight [kg/lbs] 260 275 310 320

28 Attention! The bumpers should be mounted by the customer individually

LIST OF FRAMESFOR PLOWS

Smart:

Municipal triangle adapter(475 mm)

Frame CITY cat. I

Frame CITY EURO

Frame CITY SMS

CITY / UNI:

Hitch City for triangleCat. 0 (660 mm)

Hitch City for trianglecat. I (860 mm)

Mounting type City cat. I

Frame CITY Kubota R 420

Hitch City for triangleCat. municipal (475 mm)

Plate City for individualmounting

Frame CITY Big Avant

Frame CITY - MULTICAR

Frame CITY HydrametTUR 3A T271

213.10.00.00 - Standard

213.12.00.00 - Version K

213.11.00.00 - Standard

213.13.00.00 - Version K

Triangle Cat. 0 linkage (660 mm)

Adapter Multicar

Frame Cityfor individual mounting

Frame CITY cat. II

Frame CAT 297 C

Cat. municipalDIN Cat. 0

Cat. 0DIN Cat. I

Cat. IDIN Cat. II

213.14.00.00

Cit

y /

Un

i Fr

am

e

28

0 $

211.10

211.13

211.16

211.19

211.22

211.11

211.14

211.17

211.20

211.24

211.04

211.12

211.15

211.18

211.21

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

0 - 25 mm

0 - 25 mm 0 - 140 mm

0 - 25 mm

0 - 25 mm

0 - 25 mm

0 - 25 mm 0 - 25 mm

0 - 140 mm

0 - 140 mm 0 - 140 mm

0 - 25 mm

0 - 140 mm

0 - 140 mm

0 - 25 mm

0 - 25 mm

0 - 25 mm

0 - 25 mm

0 - 25 mm

211.04.00.000

211.12.00.000

211.10.00.000

211.13.00.000

211.15.00.000

211.13.00.020

211.15.00.020

211.11.00.000

211.14.00.000

211.17.00.000211.16.00.000

211.18.00.000

211.21.00.000

211.19.00.000

211.22.00.000

211.20.00.000

211.24.00.000

211.14.00.020

211.17.00.020

www.samasz.com 29Attention! The bumpers should be mounted by the customer individually

Frame Schaffer 2028 Frame Liebherr L506 - L510

Frame CITY KRAMER Mini Frame JD 4720 TUR 400CX

Frame Giant Frame AHLMANN AZ 95 Frame Kramer Allrad

Frame City JCB 403_406_409

Frame City Gehl 540 Frame TUZ kat. I - II

Frame CITY Wacker / Weidemann

Frame Bobcat AL275

Frame Km130 Knikmops

Frame KM90 Knikmops

Frame Schaffer 2445

Frame Multihog MX

211.32

211.35

211.38

211.29

211.33

211.36

211.39

211.27

211.30

211.25 211.26

211.31

211.34

211.37

211.28

211.40

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION COPYING VERSION

COPYING VERSION

COPYING VERSION


0 - 25 mm

0 - 25 mm

0 - 25 mm

0 - 80 mm

0 - 25 mm

0 - 140 mm

0 - 140 mm

0 - 140 mm

0 - 140 mm

0 - 25 mm

0 - 25 mm

0 - 25 mm 0 - 25 mm

0 - 140 mm

0 - 140 mm 0 - 140 mm

0 - 140 mm

0 - 25 mm

0 - 80 mm

0 - 140 mm

0 - 140 mm

0 - 25 mm

0 - 25 mm

211.25.00.000 211.26.00.000211.25.00.020 211.26.00.020 211.27.00.000

211.28.00.000

211.34.00.000

211.37.00.000

211.31.00.000

211.29.00.000

211.35.00.000

211.32.00.000 211.33.00.000

211.30.00.000

211.36.00.000

211.39.00.000211.38.00.000

211.40.00.000

211.30.00.020

211.36.00.020

211.39.00.020211.38.00.020

211.40.00.020


Frame PSV CAT 428 C (D) (E)

Frame PSV CAT 444E

Frame PSV JCB 4CX / 3CXWaryński

Hidromex 102BFrame PSV

KRAMER Allrad

For self - mountingon the frame

Psv

/ R

AM

Fr

am

e

Typ

e II

580

$

Frame PSV Merlo ZM - 2 Frame JCBFrame PSV

for triangle cat. 0

Frame PSV cat. I

Frame PSV cat. I and III

Frame PSV Cat. I / IIwith loose holders

Plate PSV for individualmounting

Frame PSVtriangular cat. I - quick coupling

Frame PSV triangular cat. municipal - quick coupling

Frame MULTICAR (PSV 161 - PSV 231)

Frame PSV Frame cat. municipal

Frame JCB 4CX, 3CX,Quick coupling

202.14

202.33

202.37 202.49

202.62

202.15

202.34

202.13

202.61

202.12

202.18

202.16

202.19

202.17

202.20

202.24

202.36

202.50

COPYING VERSION

COPYING VERSION


COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

0 - 30 mm / 1.2” / 1.2”

0 - 30 mm / 1.2” / 1.2”

0 - 30 mm / 1.2” / 1.2”

0 - 30 mm / 1.2” / 1.2”

0 - 30 mm / 1.2” / 1.2”

0 - 30 mm / 1.2” / 1.2”

0 - 30 mm / 1.2”

0 - 30 mm / 1.2”

0 - 30 mm / 1.2”

0 - 30 mm / 1.2”

0 - 180 mm

0 - 180 mm

0 - 130 mm

0 - 130 mm

0 - 130 mm

0 - 130 mm

0 - 130 mm

0 - 180 mm

0 - 130 mm

0 - 180 mm

0 - 30 mm / 1.2”

0 - 30 mm / 1.2”

0 - 30 mm / 1.2” 0 - 30 mm / 1.2”

0 - 30 mm / 1.2”

0 - 30 mm / 1.2”

0 - 30 mm / 1.2”

0 - 30 mm / 1.2”

Frame PSV SMS

PSV / RAM:

202.10 202.11202.04 COPYING VERSION COPYING VERSIONCOPYING VERSION

0 - 30 mm / 1.2”

0 - 30 mm / 1.2”

0 - 130 mm0 - 180 mm0 - 30 mm / 1.2”

Frame PSV cat. II Frame PSV EURO

202.10.00.000

202.13.00.020

202.04.00.000

202.13.00.000

202.11.00.000

202.15.00.000

202.34.00.000

202.61.00.000

202.12.00.000

202.18.00.000

202.16.00.000

202.19.00.000

202.17.00.000

202.20.00.000

202.10.00.020

202.14.00.000

202.33.00.000

202.37.00.000 202.49.00.000

202.24.00.000

202.36.00.000

202.50.00.000 202.62.00.000

202.11.00.020

202.15.00.020

202.34.00.020

202.61.00.020

202.12.00.020

202.18.00.020

202.16.00.020

202.19.00.020

202.17.00.020

202.20.00.020


Frame PSV JCB 2CX

Frame PSV CAT 908 - 906

Frame PSV JCB Q - Fit

Frame PSV JCB 403 / 406 / 409

Frame PSV Volvo L20 - L25 Frame PSV Volvo L30 - L35 Frame PSV Volvo ST - MB

Frame PSV Atlas E - Serie

Frame PSV Schaffer 2028 Frame PSV T - 426 SIPMA

Frame PSV MERLObackhoe loaders 35.13 EVS ZM2

Frame PSV TURAgram 46 Joskin

Frame PSVCLAAS Scorpion

Frame PSVWeideman CX 80

Frame PSVCASE 221

Frame PSV NewHolland W50 BTC

202.21 202.22 202.23COPYING VERSION COPYING VERSION COPYING VERSION

0 - 30 mm / 1.2” / 1.2”

0 - 30 mm / 1.2”

0 - 30 mm / 1.2”

0 - 180 mm 0 - 130 mm 0 - 180 mm

Frame PSV Liebherr L506-510

Frame PSV Liebherr L528/L514

Frame PSV Manitou

202.26

202.35

202.29

202.40

202.43

202.46

202.51

202.27

202.31

202.41

202.44

202.47

202.52

202.32

202.42

202.45

202.48

202.53

202.28

202.39202.38

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSIONCOPYING VERSION

0 - 30 mm / 1.2”

0 - 30 mm / 1.2”

0 - 30 mm / 1.2”

0 - 30 mm / 1.2”

0 - 30 mm / 1.2”

0 - 30 mm / 1.2”

0 - 30 mm / 1.2”

0 - 30 mm / 1.2”

0 - 30 mm / 1.2”

0 - 30 mm / 1.2”

0 - 30 mm / 1.2”

0 - 30 mm / 1.2”

0 - 30 mm / 1.2”

0 - 30 mm / 1.2”

0 - 30 mm / 1.2”

0 - 30 mm / 1.2”

0 - 30 mm / 1.2”

0 - 30 mm / 1.2”

0 - 30 mm / 1.2”

0 - 30 mm / 1.2”

0 - 180 mm

0 - 180 mm

0 - 130 mm

0 - 130 mm

0 - 180 mm

0 - 180 mm

0 - 180 mm

0 - 180 mm

0 - 130 mm

0 - 180 mm

0 - 180 mm

0 - 180 mm

0 - 130 mm

0 - 130 mm

0 - 180 mm

0 - 180 mm

0 - 180 mm

0 - 130 mm

0 - 130 mm

Frame PSV CAT 422E 424D

Frame PSV CAT 297C

Frame PSVTerex - TL 80

Frame PSVBobcat - AL275

Frame PSVNew Holland W170B

202.21.00.000

202.29.00.000

202.40.00.000

202.43.00.000

202.46.00.000

202.51.00.000

202.35.00.000

202.26.00.000

202.22.00.000

202.31.00.000

202.41.00.000

202.44.00.000

202.47.00.000

202.52.00.000

202.38.00.000

202.27.00.000

202.23.00.000

202.32.00.000

202.42.00.000

202.45.00.000

202.48.00.000

202.53.00.000

202.28.00.000

202.39.00.000

202.21.00.020

202.29.00.020

202.40.00.020

202.43.00.020

202.46.00.020

202.51.00.020

202.35.00.020

202.26.00.020

202.22.00.020

202.31.00.020

202.41.00.020

202.44.00.020

202.47.00.020

202.52.00.020

202.27.00.020

202.23.00.020

202.32.00.020

202.42.00.020

202.45.00.020

202.48.00.020

202.53.00.020


Frame PSVTerex - TL 65

Frame PSV cat. II Frame PSV cat. II

Frame PSV EURO

Frame KRAMER 480

Frame PSV Komatsu WB 93S

Frame O&K 10.5

Frame New Holland B110 B TC

Frame LIEBHERR L509

Frame Schaffer - 130

Frame EO2626 Pinsk

Frame Giant

Frame Schaffer

Frame New Holland LB95 - B

Frame CAT 432 FQuick change Frame AHLMANN AZ 95 Frame

Bobcat T2556

Frame TUR FAUCHEUX F200

Frame VOLVO L40B Frame NEWHOLLAND LB115B

Frame PSV CAT 906 H, 907 H, 908 H

202.56

202.67

202.64

202.70

202.74

202.77

202.57

202.68

202.65

202.72

202.75

202.54

202.66

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

0 - 30 mm / 1.2”

0 - 30 mm / 1.2”

0 - 30 mm / 1.2”

0 - 30 mm / 1.2”

0 - 30 mm / 1.2”

0 - 130 mm

0 - 30 mm / 1.2”

0 - 30 mm / 1.2”

0 - 30 mm / 1.2”

0 - 30 mm / 1.2”

0 - 30 mm / 1.2”

0 - 30 mm / 1.2”

0 - 30 mm / 1.2”

202.58

202.63

202.69

202.73

202.76

202.59

202.60

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

0 - 30 mm / 1.2”

0 - 30 mm / 1.2”

0 - 30 mm / 1.2”

0 - 130 mm

0 - 30 mm / 1.2”

0 - 30 mm / 1.2”

0 - 30 mm / 1.2”

0 - 130 mm

0 - 130 mm

0 - 180 mm

0 - 180 mm

0 - 130 mm

0 - 180 mm

0 - 180 mm

Psv

/ R

AM

Fr

am

e

Typ

e II

58

0 $

202.54

0 - 30 mm / 1.2”

202.54.00.010

COPYING VERSION

202.54.00.000 202.56.00.000

202.57.00.000 202.58.00.000

202.63.00.000

202.69.00.000

202.73.00.000

202.76.00.000

202.59.00.000

202.64.00.000

202.70.00.000

202.74.00.000

202.77.00.000

202.67.00.000202.66.00.000

202.60.00.000

202.65.00.000

202.72.00.000

202.75.00.000

202.68.00.000

202.58.00.020

202.63.00.020

202.69.00.020

202.73.00.020

202.76.00.020

202.59.00.020

202.60.00.020


Frame JCB 541 - 70 Frame JD TUR Frame CAT 428F

Frame Komatsu

Frame Cat. I narrow

Frame 3-point linkage cat. II and III Frame DIN EN 15432 F1 F2 Frame Dieci mini agri 25,6

Frame Dieci ET Crono 40.7

Frame Merlo ZM3 Frame Kramer Mini

Frame Kramer Allrad 312 SL Frame New Holland 1345

202.83

202.86

165.12

165.15

202.84

202.87

165.13

202.82

202.85

165.07

165.14

202.79

202.91

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

0 - 180 mm

0 - 30 mm / 1.2”

0 - 30 mm / 1.2”

0 - 40 mm

0 - 180 mm

0 - 30 mm / 1.2”

0 - 30 mm / 1.2”

0 - 180 mm

0 - 130 mm

0 - 130 mm

0 - 40 mm

0 - 130 mm

0 - 30 mm / 1.2”

202.78 202.80

202.92

202.81

202.93


COPYING VERSION

COPYING VERSION

COPYING VERSION

0 - 30 mm / 1.2”

0 - 30 mm / 1.2”

0 - 30 mm / 1.2”

0 - 30 mm / 1.2”

0 - 30 mm / 1.2”

0 - 130 mm 0 - 130 mm

0 - 180 mm

0 - 180 mm

0 - 130 mm

Frame AlpS3 - point linkage Cat. II

Frame AlpS with lose holders

Plate AlpS forindividual mounting

Frame AlpS cat. II and III

Frame AlpS EURO

AlpS / Olimp:

165.16 COPYING VERSION

0 - 40 mm

Frame AlpS SMS

202.78.00.000 202.78.00.020 202.80.00.000

202.92.00.000

202.81.00.000

202.93.00.000

202.79.00.010

202.91.00.000

165.07.00.010

165.07.00.000

165.12.00.000

165.12.00.000

165.13.00.000

165.13.00.000

202.82.00.020

202.85.00.010

202.83.00.020

202.86.00.000202.84.00.020

202.87.00.000

202.80.00.020

202.92.00.020

202.81.00.020

202.93.00.020


Frame AlpS LIEBHERR L - 522

Frame AlpS VOLVO ST - MB

Frame AlpS Schaffer6390T

Frame AlpS TEREX - TL 80

Frame AlpS New Holland W170B

Frame AlpS VOLVO L30 L35

Frame AlpS VOLVO L180

Frame KOMATSUWB93S WB97S

Frame AlpS MANITOU

Frame AlpS JCB 2CX

Frame AlpS JCB Q - Fit

Frame AlpS Krammer 480

FrameAlpS CAT 428E

Frame AlpS LIEBHERR 506 - 510

Frame AlpS HSW 534 E

Frame AlpS JCB 4CX / 3CX

Frame AlpS JCB Q - Fit

Frame AlpS CAT 908 - 906

Frame AlpS JCB 4CX

Frame Liebherr L514+ lighting

Frame AlpS LIEBHERR L528

165.20

165.29

165.32

165.35

165.17

165.28

165.31

165.34

165.38

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

0 - 40 mm

0 - 40 mm

0 - 40 mm

0 - 40 mm

0 - 40 mm

0 - 40 mm

0 - 40 mm

0 - 40 mm

0 - 40 mm 0 - 40 mm

165.21

165.30

165.33

165.36

165.37

165.24

165.27

165.23

165.26

165.22

165.25

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

COPYING VERSION

0 - 40 mm

0 - 40 mm

0 - 40 mm

0 - 40 mm

0 - 40 mm

0 - 40 mm

0 - 40 mm

0 - 40 mm

0 - 40 mm

0 - 40 mm

0 - 40 mm

0 - 160 mm

0 - 160 mm

0 - 160 mm

0 - 160 mm

0 - 160 mm

0 - 115 mm

0 - 160 mm

0 - 160 mm

0 - 115 mm

165.39 COPYING VERSION

165.17.00.000 165.20.00.000 165.21.00.000

165.24.00.000

165.27.00.000

165.30.00.000

165.33.00.000

165.36.00.000

165.37.00.000

165.23.00.000

165.26.00.000

165.22.00.000

165.25.00.000

165.28.00.000

165.31.00.000

165.34.00.000

165.29.00.000

165.32.00.000

165.35.00.000

165.38.00.000 165.39.00.000

165.21.00.020

165.24.00.010

165.27.00.020

165.30.00.020

165.33.00.020

165.36.00.020

165.37.00.020

165.23.00.020

165.26.00.010


165.43

165.46

COPYING VERSION

COPYING VERSION

0 - 40 mm

0 - 160 mm

Frame AlpS CAT 906 H, 907 H, 908 H

Frame AlpS Atlas E - Serie

Frame Krammer 880

Frame Alps DIN B

Frame CAT 432 F2

Frame Volvo L50 - L90

Frame AlpS Merlo ZM - 2 Frame Liebherr L514

Frame triangle cat. I Frame NEWHOLLAND LB115B Frame CAT 428F

Frame HSW 9.50 M

165.42

165.48

165.49 165.50 165.51

165.40 165.41

165.47

COPYING VERSION

COPYING VERSION

COPYING VERSION COPYING VERSION COPYING VERSION


COPYING VERSION

0 - 40 mm0 - 40 mm 0 - 40 mm

0 - 40 mm

165.44 165.45COPYING VERSION COPYING VERSION

0 - 40 mm 0 - 40 mm

0 - 40 mm

0 - 40 mm 0 - 40 mm 0 - 40 mm

0 - 115 mm 0 - 115 mm

0 - 160 mm

0 - 160 mm 0 - 160 mm 0 - 160 mm

165.40.00.000 165.41.00.000 165.42.00.000

165.45.00.000

165.48.00.000

165.51.00.000165.50.00.000165.49.00.000

165.44.00.000165.43.00.000

165.46.00.000 165.47.00.000

165.45.00.010

165.48.00.020

165.51.00.020165.50.00.020165.49.00.020

165.44.00.010

Technical data and equipment provided herein, as well as images of the products may be different due to constant technical development.

True passion and constant seeking of the best solutions are amongst the ideas, which have been essential for the SaMASZ employees and have become the key to the company’s success.

What contributes the most to constant and dynamic develop-ment of the company are close contact with our customers and staying open to their needs. Thanks to dialogue with our present and future clients and trying to meet their expectations we cre-ate and strengthen up the basis of our dynamic success. We are creating the brand, which is already well recognized not only in the whole Europe, but also in the world.

Considering constant development as our top priority, we invest in product research. Our employees are the most talented Technical University graduates, who are not only experts in their own fields, but also bring in a great dose of professionalism and passion to their duties. You can always count on their competence and reliability.

Today, SaMASZ is the top Polish and one of the major European manufacturers of forage machinery. Our offer includes more than 300 types of different machines: drum mowers, disc mow-ers, tedders, rakes, flail mowers, extension arms or snow plows. Since the beginning we managed to manufacture and sell more than 110 000 mowers and few thousands of other machines. We export to more than 50 countries around the world. Our sales network includes approx. 60 companies in Poland and approx. 70 abroad.

Our main goal, which is constant development and implementa-tion to our production cutting edge technology in order to keep the world’s top quality. We are fully aware, that in this ever changing re-ality, customers tend to seek trading partners who are trustworthy, and therefore we have an ambition of being considered as a reliable and professional manufacturer. 1 /

201

8

SaMASZ Sp. z o.o.16-060 Zabłudów

ul. Trawiasta 1tel.: +48 85 664 70 31fax: +48 85 664 70 41Your dealer:

www.samasz.com

www.samasz.come-mail: [email protected]

HIGH PERFORMANCE ICE AND SNOW MANAGEMENT ...Three-shield snow plow: POWER 20 One-shield snow plow:...

Documents

Transcript of HIGH PERFORMANCE ICE AND SNOW MANAGEMENT ...Three-shield snow plow: POWER 20 One-shield snow plow:...