High Output Flood Light - 600W/900W HOFL INSTALLATION GUIDE€¦ · High Output Flood Light -...
2
HOFL INSTALLATION GUIDE High Output Flood Light - 600W/900W L N GND BROWN BLUE YELLOW/GREEN DIMMABLE DIM - WHITE BLUE BLUE BROWN BLACK WHITE GREEN DIM + GRAY BLACK PURPLE WHITE WIRING DIAGRAM High Output Flood Light - 600W/900W Problem Possible Cause Solutions LEDs stop working LEDs flash on and off The power line is improperly connected. The power plug is loose. The LED driver malfunctions. The LED chip is damaged. The output of the driver is abnormal. The LED chip breaks down. Reconnect the power cable. Firmly plug the power in. Replace with new driver . Replace with new LEDs. Replace with new driver . Replace with new LED chip. TROUBLESHOOTING WARRANTY 10 Year Warranty for original purchaser of the HOFL fixture. - In order to make a warranty claim please notify manufacturer within 60 days of malfunction or defect. Please provide proof of purchase and any other manufacturer warranty requirements. Upon receiving the warranty claim ESL Vision may require the faulty fixture to be returned promptly for analysis. - The determination of whether the fixture is defective shall be made by manufacturer in its sole discretion with consideration given to the overall performance of the product. - If the manufacturer determines the fixture is defective, manufacturer will elect, in its sole discretion to repair or replace the fixture. Manufacturer reserves the right to utilize new, reconditioned, refurbished, repaired or re-manufactured products or parts in the warranty repair or replacement process. Such products and parts will be comparable in function and performance to an original product or part, as determined by manufacturer in its sole discretion, and warranted for the remainder of the original warranty period. However, cost of labor and equipment to remove the defective product and installation of replacement fixture or replacement parts at the end-user facility are excluded. The following circumstances will not be warranted: - Damage caused by force majeure such as war, riots, sabotage, cyclones, earthquakes, tidal waves, flooding, lightning strikes, explosions, fire, flood or any other natural disasters. - Damage caused by user’s improper delivery, defects caused by incorrect operation, wrongful treatment and destruction of fixture. - Dismantling or modification or improper maintenance or repairing of the products without the manufacturer’s prior authorization. - Damage caused by buyer or installer using bad cable or other improper electrical parts. - This warranty is invalid if the fixture is not used for the purpose for which it was originally designed for. Any disputes shall be applied to the laws and regulations of v ESL Vision has the sole right to interpret and amend the above articles. 5. When installing Power Supply Box, be sure cord grips are facing downward. 6. 7. High Output Flood Light - 600W/900W
Transcript of High Output Flood Light - 600W/900W HOFL INSTALLATION GUIDE€¦ · High Output Flood Light -...
HOFL INSTALLATION GUIDEHigh Output Flood Light - 600W/900W
L
N
GND
BROWN
BLUE
YELLOW/GREEN
DIMMABLE
DIM - WHITE
BLUE
BLUE
BROWNBLACK
WHITE
GREEN
DIM +
GRAY BLACK
PURPLE WHITE
WIRING DIAGRAM
High Output Flood Light - 600W/900W
Problem Possible Cause Solutions
LEDs stop working
LEDs flash on and o�
The power line is improperly connected.
The power plug is loose.
The LED driver malfunctions.
The LED chip is damaged.
The output of the driver is abnormal.
The LED chip breaks down.
Reconnect the power cable.
Firmly plug the power in.
Replace with new driver.
Replace with new LEDs.
Replace with new driver.
Replace with new LED chip.
TROUBLESHOOTING
WARRANTY10 Year Warranty for original purchaser of the HOFL fixture.- In order to make a warranty claim please notify manufacturer within 60 days of malfunction or defect. Please provide proof of purchase and any other manufacturer warranty requirements. Upon receiving the warranty claimESL Vision may require the faulty fixture to be returned promptly for analysis.
- The determination of whether the fixture is defective shall be made by manufacturer in its sole discretion withconsideration given to the overall performance of the product.
- If the manufacturer determines the fixture is defective, manufacturer will elect, in its sole discretion to repairor replace the fixture. Manufacturer reserves the right to utilize new, reconditioned, refurbished, repaired orre-manufactured products or parts in the warranty repair or replacement process. Such products and parts will becomparable in function and performance to an original product or part, as determined by manufacturer in its solediscretion, and warranted for the remainder of the original warranty period. However, cost of labor and equipmentto remove the defective product and installation of replacement fixture or replacement parts at the end-user facilityare excluded.
The following circumstances will not be warranted:- Damage caused by force majeure such as war, riots, sabotage, cyclones, earthquakes, tidal waves, flooding,lightning strikes, explosions, fire, flood or any other natural disasters.- Damage caused by user’s improper delivery, defects caused by incorrect operation, wrongful treatment anddestruction of fixture.- Dismantling or modification or improper maintenance or repairing of the products without the manufacturer’sprior authorization.- Damage caused by buyer or installer using bad cable or other improper electrical parts.- This warranty is invalid if the fixture is not used for the purpose for which it was originally designed for. Anydisputes shall be applied to the laws and regulations of v
ESL Vision has the sole right to interpret and amend the above articles.
5.
When installing Power Supply Box,be sure cord grips are facing downward.
6.
7.
High Output Flood Light - 600W/900W
26.61"
31.18"
15.79
"
29.61"
22.2"
17.64"
15.79
"
20.63"
30°
23.86"
30°
60°
Single lamp module
The whole light module
30°
CEILING MOUNT WALL MOUNT
When installing heat sink, be sure cord grips are facing downward
10°
30°10°
High Output Flood Light - 600W/900W
WARNING1. To avoid damage, falling, electric shock and/or fire, please do not modify the fixture or replace components 1. without consulting with the factory first.
2. Please authorize only qualified personnel to install the fixture. Ensure the installation instructions are followed.Improper installation may cause falling, electric shock, fire, injury, damage and hazardous conditions.
3. Please disconnect power before installation or maintenance of the fixture.
4. Please disconnect power if it begins to smoke or emit odors to prevent fire or electric shock. Have the fixture immediately inspected by a qualified technician.
5. Please do not dismantle the fixture without first consulting with the factory.
6. Please do not touch the power supply when the fixture is in operation.
7. If the flexible cable or cord of the fixture is damaged, it should only be replaced by a factory authorized part,and installed by an authorized technician.
8. Terminal block is not included.
9. The light source contained in this fixture should only be replaced by the factory or qualified technician.
10. Install fixture in a location where it cannot be tampered with or accessed easily.
11. For use in environments where an accumulation of non-conductive dust on the fixture may be expected.
12. The fixture should not be mounted higher than 20m.
CAUTION: RISK OF ELECTRIC SHOCK
TECHNICAL SPECIFICATIONSTECHNICAL SPECIFICATIONS
63.93±2.2lbs
-22°F to 122°F
-40°F to 158°F
Product Specifications
Power Frequency
Outlook Dimensions
Luminaire Net Weight
Working Temperature
Storing Temperature
50 / 60Hz
Input Voltage 100-277 VAC / 277-480 VAC
600W
23.86"x 22.2" x 15.79"
900W
90.39±2.2lbs
31.18"x 23.86" x 15.79"
DIMENSIONS
High Output Flood Light - 600W/900W
- 600W
- 900W
3.15" 6.69"
Ø0.83"
2.7
6"
19.84"
79°
4.33"
0.24"
0.24"
Ø 4.33"
30°
23.86"
3.15"3.15" Ø 1.81"
Ø 7.87"5.51"5.12"
30°
2.7
6"
28.82"
4.33
"
Ø 0.83"
0.24"0.24"
0.24"0.24"
1. 2.
3. 4.
High Output Flood Light - 600W/900W
