HELAF eMOBILITY laadstation voor auto
-
Upload
helaf-elektrotechniek -
Category
Documents
-
view
220 -
download
0
description
Transcript of HELAF eMOBILITY laadstation voor auto
eMOBILITYCHARGING STATIONS FOR ELECTRIC VEHICLES
YOUR MOBILITY. OUR TECHNOLOGY.
COMPACT SIZEBIG PERFORMANCE
eMH1
eMH1 ELECTRIC MOBILITY HOME 1CHARGING STATIONS
Specifications EVSE501 EVSE502 (1) EVSE503 EVSE504
Compliance According to IEC 61851-1/22
Power supplysingle-phase 230 V / 16 A,
50 Hz3-phase 400 V / 16 A, 50 Hz
single-phase 230 V / 16 A,
50 Hz
single-phase 230 V / 16 A,
50 Hz
Supply voltage 230 V 230 V / 400 V 230 V 230 V
Output current 16 A 16 A 16 A 16 A
Max. charging capacity 3.6 KW 11 KW 3.6 KW 3.6 KW
Recharge socket
IEC 62196-2 compliant- Type 2 - -
Recharge Connector
complies with IEC 62196-2- - Type 2 Type 2
Recharge Connector complies
with SAE1772Type 1 - - -
Charging cable Standard cable,
Length: 5 m-
Standard cable,
Length: 3 m
Coiled cable,
Length: 0.8 - 4 m
Circuit protection devices RCBO, type A, 30 mA MCB (1) RCBO, type A, 30 mA RCBO, type A, 30 mA
EVCC Control unit IEC 61851-1 Mode 3 compliant, RS485-interface
Terminals up to 2.5 mm2
Ambient temperature -25°C to 50°C
Storage temperature -30°C to 85°C
Relative humidity 5 to 95% (no condensation)
Protection rating I
Overvoltage category III
Protection rating housing IP54
Dimensions in mm h = 272, w = 220, d = 106
Weight / unit 2920 g 2270 g 3950 g 3360 g
(1) Connection to domestic distribution box only via independent supply cable and separate Type B RCB You can find circuit protection devices for external installations in our main catalogue.
Our eMH1 is the smallest charging station available worldwide, which makes it the perfect so-
lution for your garage. Attractive and compact space-saving design. The housing is made from
impact-resistant and weatherproof plastic, making the eMH1 suitable for outdoor and carport in-
stallations as well. The unit is preconfigured and ready for use, it simply needs to be connected by
your electrician. The available charge current is individually adjustable, depending on the current
permitted by your domestic supply. Your vehicle is charged gently and efficiently, maximizing the
life of your battery.
· Preconfigured and ready to install
· LEDs indicate charging status
· Lockable cover (access to switching devices)
· Integrated circuit protection devices
· can be networked with other charging stations
via RS485 interface
220 116
272
powered byeMH2OUR POWER PACKFOR PEAK PERFORMANCE
Specifications EVSE131 EVSE231 EVSE234
Complies with IEC 61851-1/22
Power supply single-phase 230 V / 16 A, 50 Hz 3-phase 400 V / 32 A, 50 Hz 3-phase 400 V / 16 A, 50 Hz
Supply Voltage 230 V 400 V 400 V
Power Supply 16 A 16 A 16 A
Max. recharge load 3.6 KW 11 KW 11 KW
Recharge Socket
Mode 3, IEC 62196-2- Type 2 -
Recharge Connector
Mode 3, IEC 62196-1- - Type 2
Recharge Connector
acc. to SAE 1772Type 1 - -
Charger Cable
Mode 3, IEC 62196-2
Standard cable,
Length 5 Metres-
Standard cable,
Length 5 Metres
Circuit protection devices RCBO, type A, 30 mA RCCB, type B, 30 mA, MCB RCCB, type B, 30 mA, MCB
EVCC Control Unit complies with IEC 61851-1 Mode 3, RS485-Interface
Connector Clamps up to 4 mm2
Ambient Temperature -25°C to 50°C
Storage Temperature -30°C to 85°C
Humidity, relative 5 to 95% (no condensation)
Protection Rating I
Overvoltage Category III
Protection Rating Housing IP54
Dimensions in mm h = 435, w = 320, d = 192
Weight / each 2900 g to 4900 g, depending on version
eMH2 ELECTRIC MOBILITY HOME 2CHARGING STATIONS
· Charging station preconfigured and ready to install
· LEDs indicate charging status
· Lockable lid (access to switching devices)
· Integrated circuit protection devices
· ON/OFF switch for charging station and for interrupting
the recharge process
· can be networked with other charging stations
via RS485 interface
When you need a fast recharge, the eMH2 is the right choice. Charging time is reduced considerably
thanks to a charging capacity of up to 22 kW. The available charge current is individually adjustable,
depending on the current permitted by your domestic supply. Perfect for private and semi-public
areas such as underground and undercover, hotel and company car parks. Thanks to its weatherproof
housing, the eMH1 is also suitable for outdoor and carport installations. The eMH2 is pre-assembled
for installation and ready for use.
322 192
435
eMCTHE SLEEK SOLUTIONFOR PUBLIC AREAS
Type EVSE301
Regulations acc. to IEC 621962
Supply voltage 230 V / 50 Hz
Power supply/
max. charging current16 A
Charging socket DIN 49440 compliant SCHUKO socket
Display LCD, 2 lines
Interface Ethernet RJ45
User identification RFID 13,56 MHz (MIFARE)
User data storage Compaq-Flashkarte
Circuit protection devicesPreconfigured and ready to install
with RCBO, type A, 16 A, 30 mA, power meter and contactor
Connecting terminals bis 4 mm2
Storage temperature - 30 °C…+ 85 °C
Ambient temperature when used - 20 °C…+ 40 °C
Humidity, relative 5…95 % (no condensation)
Protection class I
Overvoltage category II
Resistance class I
Degree of protection for casing IP54
Dimensions 503 x 134 x 126 mm
Gewicht/Stück 4.000 g
· Access via RFID card
· protected by FI/LS-switch (RCBO)
· integrated energy meter
The eMC is a compact, rugged and weatherproof solution for semi-
public areas such as underground and undercover, hotel and com-
pany car parks. Users simply unlock the station with a chip card
and charge their vehicle while parked. An LCD screen indicates
the station’s current operating status.
eMC ELECTRIC MOBILITY CITYCHARGING STATION
TYPE 2 RECHARGE SOCKET
complies with IEC 621962 · 32 A 240 / 415 V AC · signal contact 2 A 30 V DCwith electrical locking solenoid · 12 V / 200 mA DC solenoid · splash proof (IP44)
SIGNAL CONTACTFOR SOCKET OUTLETS1561.../1562... UND 1661.../1662...
16 A / 250 V AC · Signal switch1 change-over relay · 5 A / 250 V AC3 A / 0-30 V DC
TYPE 2 RECHARGE CABLE
complies with IEC 621962 · 32 A 240 /415 V AC · Length: 3 m · splash proof (IP44)
ART.-NO.WEIGHT g / UNIT
UNITS /PACK
LAK32A3 2.200 1
ADAPTER CABLE · TYPE 1 TO TYPE 2
32 A 230 V AC · Length: 5 msplash proof (IP44)
ART.-NO.WEIGHT g / UNIT
UNITS /PACK
LAKT2T1 1.200 1
ART.-NO.WEIGHT g / UNIT
UNITS /PACK
SUB-UNITS
EVCC 220 3 4
complies with IEC 61851-1 Mode 3 Charge current preset at 16 A · Ad-justable from 6 A to 80 A via serial interface
EVCC CONTROL UNIT
The EVCC is the core module built into
our charging stations and responsible for
communication with the electric vehicle.
The charging procedure complies with
IEC 61851-1 Mode 3. Potential-free swit-
ching contacts are used for load relay
(EV supply), to lock charge connectors
and for external cooling control. Two ex-
ternal LEDs can be connected without
additional dropping resistors and indi-
cate the current system status of the
charging station. Default and target
charge current are set using a network-
ready RS485 serial interface and allow
load management. The target current
can be adjusted, even during the char-
ging process.
ART.-NO.WEIGHT g / UNIT
UNITS /PACK
LAD32AV 350 1
ART.-NO.WEIGHT g / UNIT
UNITS /PACK
SW23C2 10 10
ART.-NO.WEIGHT g / UNIT
UNITS /PACK
RA4303 500 1
RESIDUAL CURRENT CIRCUIT BREAKER RCCB
Residual Current Circuit Breaker (RCCB) · Universal current Type B4-pole short-delay triggered switching
Discover our entire product range:
Catalogue ordering and further information available
on our website www.abl-sursum.com
COMPONENTSFOR CHARGING STATION
COMPACT
POWERFUL
INTELLIGENT
Worldwide leadership in connecting
and protecting power
Made in Germany
HELAF Elektrotechniek
Carlsonstraat 21 8263 CA Kampen Postbus 65 8300 AB Emmeloord Tel. : +31(0)88 244 28 80 Fax : +31(0)88 244 28 89 E-mail : [email protected]