9

6

7

5

3

4

8

10

1

2

1-48 Toronto, Edmonton, Saskatoon, Vancouver, Montreal

HDPE PipeFabco Plastics is the leading Canadian supplier of industrial plastic pipe including HDPE. Our dedicated and knowledgeable sales staff can provide high quality technical information and accurate project quotations on a timely basis. Fabco provides HDPE pipe to 63”, custom fabricated butt fusion fittings, butt fusion equipment and easy to use electrofusion fittings to 12”.The standard length of HDPE pipe is 50 feet, in sizes above 2” in diameter with longer lengths available on request. Coiled pipe is available in diameters up to 3” and is available in 250 and 500 foot lengths. Larger pipe sizes and coil lengths are available on special request.

Features:HDPE Pipe is Leak Proof• HDPE pipe can be joined by thermal fusion to

form a joint that is as strong as the pipe itself and is leak free. Thermal fusion eliminates potential leak points every 8-20 feet commonly found with Concrete, PVC and Ductile Iron pipe. Leak proof joints also eliminate infiltration and exfiltration problems experienced with other pipe joining methods. Since fused joints are self-restraining, costly thrust restraints or thrust blocks are not required.

HDPE Pipe is Corrosion and Chemical Resistant• HDPE pipe will not corrode, tuberculate or

support biological growth. It is the material of choice in harsh chemical environments. HDPE pipe has a smooth ID and maintains its flow capability over time - Hazen Williams C Factor remains 150, even after years of use.

HDPE Pipe is Flexible and Fatigue Resistant• HDPE pipe can be bent to a radius 25 times

the nominal pipe diameter. This can eliminate many fittings required for directional changes compared to piping systems made from other materials. In addition, the flexibility of HDPE pipe makes it well suited for dynamic soils and areas prone to earthquake. HDPE pipe for pressure applications can accept repetitive pressure surges that exceed the static pressure rating of the pipe.

HDPE Pipe is Lightweight and Impact Resistant• HDPE pipe is much easier to handle and install

than heavier, rigid metallic or concrete pipe, allowing for cost advantages in the construction process. It is structurally better able to withstand an impact than other pipe materials, especially in cold weather installations when other pipes like PVC are prone to cracks and breaks.

HDPE Pipe is Easy to Install• Flexibility and leak free joints allow for unique

and cost effective methods of installation of HDPE pipe that the rigid Concrete, PVC and Ductile Iron pipes can’t use. These alternate installation methods (Horizontal Directional Drilling, Pipe Bursting, Sliplining, Plow and Plant, Submerged or Floating Pipe) can save considerable time and money in most applications.

HDPE Pipe is Cost Effective and Permanent• HDPE pipe is cost effective and has long term

cost advantages due to its physical properties, leak free joints and reduced maintenance costs. The Plastics Pipe Institute estimates the service life for HDPE pipe to conservatively be 50-100 years.

HDPE PIPE

1

2

9

6

7

5

3

4

8

10www.fabcoplastics.com 1-49

DR11 (160 PSI) DR9 (200 PSI) DR7.3 (254 PSI)

Nominal Pipe Size

Average Outside

Diameter

Average Inside

Diameter

Min. Wall Thickness

Average Weight (lbs/ft)

Average Inside

Diameter

Min. Wall Thickness

Average Weight (lbs/ft)

Average Inside

Diameter

Min. Wall Thickness

Average Weight (lbs/ft)

3 3.50 2.825 0.318 1.38 2.676 0.389 1.65 2.484 0.479 1.974 4.50 3.633 0.409 2.29 3.440 0.500 2.73 3.193 0.616 3.265 5.56 4.491 0.506 3.50 4.253 0.618 4.17 3.947 0.762 4.996 6.63 5.348 0.602 4.96 5.064 0.736 5.92 4.701 0.908 7.077 7.13 5.752 0.648 5.74 5.447 0.792 6.85 5.056 0.976 8.188 8.63 6.963 0.784 8.41 6.593 0.958 10.03 6.120 1.182 11.9810 10.75 8.678 0.977 13.06 8.218 1.194 15.59 7.628 1.473 18.6212 12.75 10.293 1.159 18.37 9.747 1.417 21.92 9.047 1.747 26.1913 13.38 10.797 1.216 20.22 10.224 1.486 24.13 9.491 1.832 28.8214 14.00 11.302 1.273 22.15 10.702 1.556 26.43 9.934 1.918 31.5816 16.00 12.916 1.455 28.93 12.231 1.778 34.53 11.353 2.192 41.2418 18.00 14.531 1.636 36.62 13.760 2.000 43.70 12.773 2.466 52.2020 20.00 16.145 1.818 45.21 15.289 2.222 53.95 14.192 2.740 64.4422 22.00 17.760 2.000 54.70 16.818 2.444 65.28 15.611 3.014 77.9824 24.00 19.375 2.182 65.10 18.347 2.667 77.68 17.030 3.288 92.8026 26.00 20.989 2.364 76.41 19.876 2.889 91.17 18.449 3.562 108.9128 28.00 22.604 2.545 88.61 21.404 3.111 105.71 - - -30 30.00 24.218 2.727 101.72 22.933 3.333 121.38 - - -

32(M) 31.59 25.505 2.872 112.82 24.152 3.510 134.62 - - -36 36.00 29.062 3.273 146.48 - - - - - -

DR32.5 (50 PSI) DR26 (64 PSI) DR21 (80 PSI) DR17 (100 PSI)

Nominal Pipe Size

Average Outside Diam-eter

Average Inside Diam-eter

Min. Wall

Thick-ness

Average Weight (lbs/ft)

Average Inside Diam-eter

Min. Wall

Thick-ness

Average Weight (lbs/ft)

Average Inside Diam-eter

Min. Wall

Thick-ness

Average Weight (lbs/ft)

Average Inside Diam-eter

Min. Wall

Thick-ness

Average Weight (lbs/ft)

3 3.50 - - - - - - 3.147 0.167 0.76 3.064 0.206 0.934 4.50 4.206 0.138 0.83 4.133 0.173 1.03 4.046 0.214 1.26 3.939 0.265 1.545 5.56 5.200 0.171 1.27 5.109 0.214 1.57 5.001 0.265 1.93 4.869 0.327 2.356 6.63 6.193 0.204 1.80 6.085 0.255 2.23 5.956 0.315 2.73 5.799 0.390 3.337 7.13 6.660 0.219 2.08 6.544 0.274 2.58 6.406 0.339 3.16 6.236 0.418 3.858 8.63 8.062 0.265 3.05 7.922 0.332 3.78 7.754 0.411 4.63 7.549 0.507 5.6510 10.75 10.049 0.331 4.73 9.873 0.413 5.87 9.665 0.512 7.19 9.409 0.632 8.7712 12.75 11.918 0.392 6.66 11.710 0.490 8.25 11.463 0.607 10.11 11.160 0.750 12.3413 13.38 12.503 0.412 7.33 12.284 0.514 9.08 12.025 0.637 11.13 11.707 .0787 13.5814 14.00 13.087 0.431 8.03 12.858 0.538 9.95 12.587 0.667 12.19 12.254 0.824 14.8716 16.00 14.956 0.492 10.48 14.695 0.615 12.99 14.385 0.762 15.93 14.005 0.941 19.4318 18.00 16.826 0.554 13.27 16.532 0.692 16.45 16.183 0.857 20.16 15.755 1.059 24.5920 20.00 18.695 0.615 16.38 18.369 0.769 20.30 17.981 0.952 24.88 17.506 1.176 30.3522 22.00 20.565 0.677 19.82 20.206 0.846 24.57 19.779 1.048 30.11 19.256 1.294 36.7324 24.00 22.434 0.738 23.59 22.043 0.923 29.24 21.577 1.143 35.83 21.007 1.412 43.7126 26.00 24.304 0.800 27.68 23.880 1.000 34.31 23.375 1.238 42.05 22.758 1.529 51.3028 28.00 26.174 0.862 32.11 25.717 1.077 39.80 25.173 1.333 48.77 24.508 1.647 59.5030 30.00 28.043 0.923 36.86 27.554 1.154 45.68 26.971 1.429 55.99 26.259 1.765 68.30

32(M) 31.59 29.533 0.972 40.88 29.018 1.215 50.67 28.405 1.504 62.10 27.654 1.858 75.7536 36.00 33.652 1.108 53.08 33.065 1.385 65.79 32.366 1.714 80.62 31.511 2.118 98.35

40(M) 39.47 36.894 1.214 63.80 36.251 1.518 79.07 35.485 1.879 96.91 34.547 2.322 118.2242 42.00 39.260 1.292 72.24 38.575 1.615 89.54 37.760 2.000 109.74 36.762 2.471 133.86

48(M) 47.38 44.291 1.458 91.94 43.519 1.822 113.96 42.599 2.256 139.67 41.473 2.787 170.3754 54.00 50.478 1.662 119.42 49.597 2.077 148.02 48.549 2.571 181.41 47.266 3.176 221.29

55(M) 55.30 51.688 1.701 125.22 50.786 2.127 155.20 49.713 2.633 190.21 48.399 3.253 232.0363(M) 63.21 59.086 1.945 163.62 58.055 2.431 202.81 56.828 3.010 248.55 - - -

Notes• Pipe dimensions are in accordance with ASTM F714 and AWWA C906.• Pressure ratings are for water at 73.4 deg F.• Some of the pipe sizes and/or DRs above are only available upon request. • Other diameters and DRs not listed may be available upon special request.• All dimensions are in inches unless otherwise specified.• Weights are calculated by the methodology established in PPI’s TR7.

HDPE PIPE

9

6

7

5

3

4

8

10

1

2

1-50 Toronto, Edmonton, Saskatoon, Vancouver, Montreal

HDPE FITTINGS

Butt 45° Elbows (Elongated)

SDR 17 (STANDARD DIMENSION RATIO) 100 PSI (WORKING PRESSURE AT 73.4°F)NOMINAL DIAMETER A (IN) B (IN) C (IN)WALL D (IN) OD E (IN) WEIGHT (LBS)

2” IPS 3.23 2.64 0.14 2.375 6.38 0.233” IPS 4.72 3.86 0.206 3.5 9.33 0.724” IPS 5.31 4.21 0.264 4.5 10.63 1.326” IPS 6.89 5.35 0.39 6.625 14.09 3.778” IPS 8.46 6.54 0.508 8.625 17.48 8.0310” IPS 10.04 7.64 0.633 10.75 20.94 14.4412” IPS 10.63 7.8 0.75 12.75 22.64 21.3

SDR 11 (STANDARD DIMENSION RATIO) 160 PSI (WORKING PRESSURE AT 73.4°F)

NOMINAL DIAMETER

A (IN)

B (IN)

C (IN) WALL

D (IN) OD

E (IN)

WEIGHT (LBS)

3/4” IPS 2.28 2.05 0.095 1.05 4.29 0.051” IPS 2.48 2.17 0.119 1.315 4.69 0.08

1 1/4” IPS 2.83 2.44 0.151 1.66 5.31 0.141 1/2” IPS 3.07 2.64 0.173 1.9 5.91 0.21

2” IPS 3.23 2.64 0.216 2.375 6.38 0.353” IPS 4.72 3.86 0.318 3.5 9.33 1.074” IPS 5.31 4.21 0.409 4.5 10.63 26” IPS 6.89 5.35 0.603 6.625 14.09 5.558” IPS 8.46 6.54 0.785 8.625 17.48 11.6410” IPS 10.04 7.64 0.978 10.75 20.94 21.312” IPS 10.63 7.8 1.16 12.75 22.64 31.84

Butt 90° Elbows (Elongated)

SDR 17 (STANDARD DIMENSION RATIO) 100 PSI (WORKING PRESSURE AT 73.4°F)NOMINAL DIAMETER A (IN) B (IN) C (IN)WALL D (IN) OD E (IN) WEIGHT (LBS)

2” IPS 4.25 2.95 0.14 2.375 5.44 0.283” IPS 5.91 4.06 0.206 3.5 7.66 0.84” IPS 6.89 4.53 0.264 4.5 9.14 1.646” IPS 9.06 5.63 0.39 6.625 12.37 4.88” IPS 11.81 7.2 0.508 8.625 16.13 10.0510” IPS 13.78 8.27 0.633 10.75 19.15 18.3312” IPS 14.96 8.46 0.75 12.75 21.33 27.47

SDR 11 (STANDARD DIMENSION RATIO) 160 PSI (WORKING PRESSURE AT 73.4°F)

NOMINAL DIAMETER

A (IN)

B (IN)

C (IN) WALL

D (IN) OD

E (IN)

WEIGHT (LBS)

3/4” IPS 2.68 2.05 0.095 1.05 3.2 0.051” IPS 2.91 2.17 0.119 1.315 3.57 0.09

1 1/4” IPS 3.35 2.44 0.151 1.66 4.18 0.161 1/2” IPS 3.7 2.64 0.173 1.9 4.65 0.22

2” IPS 4.25 2.95 0.216 2.375 5.44 0.433” IPS 5.91 4.06 0.318 3.5 7.66 1.254” IPS 6.89 4.53 0.409 4.5 9.14 2.426” IPS 9.06 5.63 0.603 6.625 12.37 6.768” IPS 11.81 7.2 0.785 8.625 16.13 15.0810” IPS 13.78 8.27 0.978 10.75 19.15 27.0612” IPS 14.96 8.46 1.16 12.75 21.33 41.05

Molded of PE 100/4710/3408 Black

Molded of PE 100/4710/3408 Black

1

2

9

6

7

5

3

4

8

10www.fabcoplastics.com 1-51

Butt End Caps (Elongated)

SDR 17 (STANDARD DIMENSION RATIO) 100 PSI (WORKING PRESSURE AT 73.4°F)NOMINAL DIAMETER A (IN) B (IN) C (IN)WALL D (IN) OD WEIGHT (LBS)

2” IPS 3.23 0.14 2.375 2.52 0.123” IPS 4.72 0.206 3.5 3.7 0.394” IPS 5.31 0.264 4.5 3.98 0.716” IPS 6.89 0.39 6.625 4.84 1.988” IPS 8.66 0.508 8.625 5.83 4.2310” IPS 9.84 0.633 10.75 6.3 7.5312” IPS 11.77 0.75 12.75 7.52 12.4

SDR 11 (STANDARD DIMENSION RATIO) 160 PSI (WORKING PRESSURE AT 73.4°F)NOMINAL DIAMETER A (IN) B (IN) C (IN)

WALLD (IN)

ODWEIGHT

(LBS)3/4” IPS 2.05 0.095 1.05 1.77 0.021” IPS 2.2 0.119 1.315 1.77 0.04

1 1/4” IPS 2.52 0.151 1.66 1.99 0.071 1/2” IPS 2.83 0.173 1.9 2.2 0.1

2” IPS 3.23 0.216 2.375 2.52 0.193” IPS 4.72 0.318 3.5 3.7 0.594” IPS 5.31 0.409 4.5 3.98 1.076” IPS 6.89 0.603 6.625 4.84 2.888” IPS 8.66 0.785 8.625 5.83 6.3210” IPS 9.84 0.978 10.75 6.3 10.912” IPS 11.77 1.16 12.75 7.52 18.39

Butt Flange Adapters (Elongated)

SDR 17 (STANDARD DIMENSION RATIO) 100 PSI (WORKING PRESSURE AT 73.4°F)NOMINAL DIAMETER A (IN) OD B (IN) C (IN) D (IN) E (IN) WALL WEIGHT (LBS)

2” IPS 2.375 3.94 0.55 6.1 0.14 0.373” IPS 3.5 5 0.67 6.1 0.206 0.714” IPS 4.5 6.61 0.79 6.1 0.264 1.276” IPS 6.625 8.5 1.02 8.07 0.39 3.028” IPS 8.625 10.63 1.02 10.67 0.508 6.0210” IPS 10.75 12.99 1.18 11.5 0.633 10.0612” IPS 12.75 15.75 1.38 10.83 0.75 14.17

SDR 11 (STANDARD DIMENSION RATIO) 160 PSI (WORKING PRESSURE AT 73.4°F)

NOMINAL DIAMETER

A (IN) OD

B (IN) C (IN) D (IN) E (IN)

WALLWEIGHT

(LBS)3/4” IPS 1.05 1.85 0.39 4.02 0.095 0.071” IPS 1.315 2.36 0.39 4.02 0.119 0.11

1 1/4” IPS 1.66 2.8 0.39 4.02 0.151 0.161 1/2” IPS 1.9 3.15 0.39 4.02 0.173 0.12

2” IPS 2.375 3.94 0.55 6.1 0.216 0.483” IPS 3.5 5 0.67 6.1 0.318 0.934” IPS 4.5 6.61 0.79 6.1 0.409 1.666” IPS 6.625 8.5 1.02 8.07 0.603 4.078” IPS 8.625 10.63 1.26 10.67 0.785 8.7310” IPS 10.75 12.99 1.38 11.5 0.978 14.1112” IPS 12.75 15.75 1.5 10.83 1.16 19.88

HDPE FITTINGS

Molded of PE 100/4710/3408 Black

Molded of PE 100/4710/3408 Black

9

6

7

5

3

4

8

10

1

2

1-52 Toronto, Edmonton, Saskatoon, Vancouver, Montreal

Ductile Iron Backing Rings

PIPE DIAMETER OD FLANGE THICKNESS ID BOLT # BOLT HOLE DIAMETER BOLT CIRCLE1" 3.5 0.44 0.91 4 0.63 2.38

1 1/4" 4.63 0.5 1.72 4 0.63 3.51 1/2" 5.0 0.5 1.97 4 0.63 3.88

2" 6.0 0.5 2.75 4 0.75 4.753" 7.5 0.5 3.56 4 0.75 6.04" 9.0 0.56 4.56 8 0.75 7.506" 11.0 0.63 6.75 8 0.88 9.58" 13.5 0.63 8.75 8 0.88 11.7510" 16.0 0.63 10.88 12 1.0 14.2512" 19.0 0.75 12.88 12 1.0 17.0

Butt Reducers (Concentric Elongated)

SDR 17 (STANDARD DIMENSION RATIO) 100 PSI (WORKING PRESSURE AT 73.4°F)

NOMINAL DIAMETER

A (IN)

B (IN)

C (IN)

D (IN)

WALL

E (IN) OD

F (IN) OD

G (IN)

WALL

WEIGHT (LBS)

3 x 2” IPS 7.87 3.94 2.95 0.206 2.375 3.5 0.14 0.474 x 2 ” IPS 9.06 4.33 2.95 0.264 2.375 4.5 0.14 0.84 x 3” IPS 9.06 4.33 3.94 0.264 3.5 4.5 0.206 0.946 x 3” IPS 11.42 5.12 3.94 0.39 3.5 6.625 0.206 2.186 x 4” IPS 11.42 5.12 4.33 0.39 4.5 6.625 0.264 2.398 x 6” IPS 12.8 6.1 5.12 0.508 6.625 8.625 0.39 4.9210 x 8” IPS 14.37 6.25 5.813 0.75 8.625 10.75 0.508 10.2112 x 8” IPS 16.54 7.09 6.1 0.75 8.625 12.75 0.508 12.8212x10” IPS 16.54 7.09 6.69 0.75 10.75 12.75 0.633 14.43

SDR 11 (STANDARD DIMENSION RATIO) 160 PSI (WORKING PRESSURE AT 73.4°F)NOMINAL DIAMETER A (IN) B (IN) C (IN) D (IN) WALL E (IN) OD F (IN) OD G (IN) WALL WEIGHT (LBS)

2 x 1 ” IPS 6.5 2.95 2.64 0.216 1.9 2.375 0.173 0.293 x 2” IPS 7.87 3.94 2.95 0.318 2.375 3.5 0.216 0.74 x 2” IPS 9.06 4.33 2.95 0.409 2.375 4.5 0.216 1.214 x 3” IPS 9.06 4.33 3.94 0.409 3.5 4.5 0.318 1.416 x 3” IPS 11.42 5.12 3.94 0.603 3.5 6.625 0.318 3.216 x 4 ” IPS 11.42 5.12 4.33 0.603 4.5 6.625 0.409 3.548 x 6” IPS 12.8 6.1 5.12 0.785 6.625 8.625 0.603 7.3110 x 8” IPS 14.37 6.25 5.875 1.16 8.625 10.75 0.785 14.4512 x 8” IPS 16.54 7.09 6.1 1.16 8.625 12.75 0.785 19.1112 x 10” IPS 16.54 7.09 6.69 1.16 10.75 12.75 0.978 21.66

HDPE FITTINGS

Conventional Cross Section in Ductile Iron

• Description: A conventional cross section (reduced section modulus) in ductile iron.

• Utilization: A back-up ring for IPS or APR connections. Buttweld or integrally flared stub-ends.

• Materials: Cast in ductile iron A536. Tensile strength 80,000 psi, yield 55,000 psi, elongation 6%.

• Dimensions: Vital dimensions AWWA C207, Mates with ANSI B16.5, B16.47; AWWA C207.

• Finish: Red oxide primer, hot dipped galvanized

Molded of PE 100/4710/3408 Black

1

2

9

6

7

5

3

4

8

10www.fabcoplastics.com 1-53

Butt Tees (Elongated)

SDR 17 (STANDARD DIMENSION RATIO) 100 PSI (WORKING PRESSURE AT 73.4°F)NOMINAL DIAMETER A (IN) B (IN) C (IN) D (IN) E (IN) WEIGHT (LBS)

2” IPS 8.66 4.33 0.14 2.375 2.48 0.533” IPS 11.81 5.91 0.206 3.5 3.54 1.454” IPS 13.78 6.89 0.264 4.5 3.94 2.586” IPS 18.11 9.06 0.39 6.625 4.72 7.248” IPS 23.62 11.81 0.508 8.625 5.71 16.610” IPS 27.56 13.78 0.633 10.75 6.3 28.912” IPS 31.57 15.97 0.75 12.75 7.52 45.32

SDR 11 (STANDARD DIMENSION RATIO) 100 PSI (WORKING PRESSURE AT 73.4°F)

NOMINAL DIAMETER A (IN) B (IN) C (IN) D (IN) E (IN) WEIGHT

(LBS)3/4” IPS 5 2.5 0.095 1.05 1.77 0.091” IPS 5.67 2.83 0.119 1.315 1.77 0.17

1 1/4” IPS 6.61 3.31 0.151 1.66 2.01 0.31 1/2” IPS 7.99 4 0.173 1.9 2.52 0.47

2” IPS 8.66 4.33 0.216 2.375 2.48 0.823” IPS 11.81 5.91 0.318 3.5 3.54 2.184” IPS 13.78 6.89 0.409 4.5 3.94 4.026” IPS 18.11 9.06 0.603 6.625 4.72 10.918” IPS 23.62 11.81 0.785 8.625 5.71 24.6110” IPS 27.56 13.78 0.978 10.75 6.3 42.612” IPS 31.57 15.97 1.16 12.75 7.52 67.85

Electro-Fusion CouplerSDR 17-7.4 PE 100/4710 BLACK. MOP WATER

160PSI / GAS 100PSI INJECTION MOLDED.NOMINAL

SIZE DA (OD)PIPE OD

NOMINAL L

NOMINAL D

NOMINAL D1

NOMINAL T

1/2" .63" 2.953 1.22 1.398 1.4763/4" 1.05" 3.189 1.417 1.496 1.5941" 1.315" 3.504 1.732 1.654 1.752

1 1/4" 1.66" 3.898 2.087 1.811 1.9491 1/2" 1.9" 4.37 2.638 2.008 2.185

2" 2.375" 5 3.13 2.185 2.53" 3.5" 5.551 4.33 2.835 2.7364" 4.5" 5.98 5.55 3.307 2.956" 6.625" 7.126 8.11 4.39 3.528" 8.625" 9.094 10.551 5.433 4.46910" 10.75"12" 12.75"

STEEL INSERT, INJECTION MOLDED, HIGH STIFFNESS, DIMENSIONAL AND HEAT STABILITY

PIPE DIAMETER OD (MM-IN) D

(IN)D2

(IN)D3

(IN)B

(IN)K (IN)

1/2" 20 - 1/2" - MOP 160 psi 3.74 0.63 1.102 0.472 2.383/4" 25 - 3/4" - MOP 160 psi 4.016 0.63 1.339 0.472 2.751" 32 - 1" - MOP 160 psi 4.488 0.630 1.654 0.630 3.120

1 1/4" 40 - 1 1/4" - MOP 160 psi 5.118 0.630 2.008 0.630 3.5001 1/2" 50 - 1 1/2" - MOP 160 psi 5.236 0.630 2.441 0.709 3.880

2" 63 - 2" - MOP 160 psi 6.378 0.787 3.071 0.709 4.7502 1/2" 75-2 1/2"- MOP 160 psi 7.244 0.787 3.622 0.709 5.500

3" 90 - 3" - MOP 160 psi 7.638 0.787 4.370 0.709 6.0004" 110/125 - 4" - MOP 160 psi 9.015 0.787 5.236 0.709 7.5006" 160 - 6" - MOP 160 psi 11.141 0.866 7.008 0.945 9.5008" 200/225 - 8" - MOP 160 psi 13.582 0.866 9.291 0.945 11.75010" 250 - 10" - MOP 160 psi 16.22 0.984 11.339 1.063 14.25012" 315 - 12" - MOP 160 psi 19.17 0.984 13.307 1.260 17.000

HDPE FITTINGS

PP Gray Steel Backing Ring ANSI (Fiber Reinforced)

Molded of PE 100/4710/3408 Black