Guide to Swapping BTSs from BSC32 or BSC6000 to BSC6900£¨V900R011£©-20100930-A-V1.0

8/10/2019 Guide to Swapping BTSs from BSC32 or BSC6000 to BSC6900V900R011-20100930-A-V1.0

1/17

Guide to Swapping BTS from BSC32 orBSC6000 to GBSC6900 V900R011

Issue 01

Date 2010-08-24

!"#$I T$C%&'&GI$S C&() 'TD(


2/17

Cop*rig+t , uawei Te-+no.ogies Co() 'td( 2010( ".. rig+ts reser/ed(

No part of this document may be reproduced or transmitted in any form or by any means without prior

written consent of Huawei Technologies Co! "td

Trademars and ermissions

and other Huawei trademar#s are trademar#s of Huawei Technologies Co! "td

$ll other trademar#s and trade names mentioned in this document are the property of their respecti%e

holders

%oti-e

The purchased products! ser%ices and features are stipulated by the contract made between Huawei and

the customer $ll or part of the products! ser%ices and features described in this document may not be

within the purchase scope or the usage scope &nless otherwise specified in the contract! all statements!

information! and recommendations in this document are pro%ided '$( )(' without warranties! guarantees

or representations of any #ind! either e*press or implied

The information in this document is sub+ect to change without notice ,%ery effort has been made in the

preparation of this document to ensure accuracy of the contents! but all statements! information! and

recommendations in this document do not constitute the warranty of any #ind! e*press or implied

Huawei Technologies Co! "td

$ddress Huawei )ndustrial .ase

.antian! "onggang

(hen/hen 1812eople3s epublic of China

5ebsite http66wwwhuaweicom

,mail support7huaweicom

Hotline 0-2890000 4008:02118

;a* 0-2890111
http://www.huawei.com/mailto:[email protected]://www.huawei.com/mailto:[email protected]


3/17

Guide to Swapping BTSs from BSC32 or BSC6000 to

GBSC6900 V900R011

About Tis !o"ument

About This Document

Author

Prepared by !ing #u$un Date 2010%0&%2'

Reviewedby Date

Tested by Date

Approvedby

Date

NoteTis guide is based on C() S*C230+ ,en te C() of oter -ersions are used. /ou need tomae ad$ustments a""ording/ if te operation Gs are different to some e4tent+

History

Issue

Description Date Author Approvedby

1+0 5irst issue 2010%0&%2' !ing #u$un

ssue 01 2009%0'%307 8uawei *roprietar/ and Confidentia

Cop/rigt 8A,)

Te"noogies Co+. :td

iii


4/17


GBSC6900 V900R011

Contents

Contents

1 Precautions for BT wappin!""""""""""""""""""""""""""""""""""""""""""""""""""""1#1

$ Preparations for BT Data wappin!"""""""""""""""""""""""""""""""""""""""""""$#1

2+1 *reparing for Software and Guides++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++2%1

2+2 nstaing Toos and Software+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++2%22+3 Ba"ing p BSC6900 !ata++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++2%2

% &p!radin! BC Data Con'!uration""""""""""""""""""""""""""""""""""""""""""""""%#1

3+1 pgrading BSC32 !ata Configuration to BSC6000++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++3%1

3+2 pgrading BSC6000 V900R001 or BSC6000 V900R003 !ata Configuration to BSC6000 V900R00&+++++3%1

3+3 pgrading BSC6000 V900R00& !ata Configuration to BSC6900+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++3%2

3+3+1 pgrading BSC6000 V900R00& !ata Configuration to BSC6900 Troug te *C ;(+++++++++++++++ ++3%3

( wappin! cripts on the C)*""""""""""""""""""""""""""""""""""""""""""""""""""""""(#1

'+1 (aing a Swapping S"ript on te C()+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++'%1

'+2 Running te Swapping S"ript+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++'%6


Cop/rigt 8A,)

Te"noogies Co+. :td

-


5/17

1 Precautions for BT wappin!Repa"ing a BSC of a -ersion wit a BSC6900 in-o-es te swit"ing of te ardwarepatform. and does not support te "ommon software upgrade mode+ nstead. /ou need to"reate a BSC6900. and ten swap te BTS data of te BSC to te BSC6900 for reaipgrading BSC32 !ata Configuration to BSC6000>and ten to BSC6900 a""ording to se"tion 3+3+1>pgrading BSC6000 V900R00& !ataConfiguration to BSC6900 Troug te *C ;(>. and perform ree-ant operationsa""ording to se"tion '+1>(aing a Swapping S"ript on te C()> and se"tion

'+2>Running te Swapping S"ript+> 5rom a BSC6000 V900R001 or BSC6000 V900R003 to a BSC6900= n tis s"enario.

upgrade te BSC6000 V900R001 or BSC6000 V900R003 to BSC6000 V900R00&a""ording to se"tion 3+2>pgrading BSC6000 V900R001 or BSC6000 V900R003 !ataConfiguration to BSC6000 V900R00&> and ten to BSC6900 a""ording to se"tion3+3+1>pgrading BSC6000 V900R00& !ata Configuration to BSC6900 Troug te *C;(>. and perform ree-ant operations a""ording to se"tion '+1>(aing a SwappingS"ript on te C()> and se"tion '+2>Running te Swapping S"ript+>

5rom a BSC6000 V900R00& to a BSC6900= n tis s"enario. upgrade te BSC6000

V900R00& to BSC6900 a""ording to se"tion 3+3+1>pgrading BSC6000 V900R00& !ataConfiguration to BSC6900 Troug te *C ;(>. and perform ree-ant operationsa""ording to se"tion '+1>(aing a Swapping S"ript on te C()> and se"tion'+2>Running te Swapping S"ript+>


6/17

$ Preparations for BT Datawappin!

$"1 Preparin! for oftware and +uides !ownoad software from te support website a""ording to te foowing tabe+

oftware &sed to

BSC32%to%BSC6000 data upgradetoo

pgrade BTS data from BSC32 to BSC6000+

BSC6900 V900R011 software,indows7

5un"tion as te *C ;( on te *C for upgradingBTS data from BSC6000 to BSC6900+

nstaation dis of te C() instandaone mode and "orrespondingi"ense fie

Swap te BTS data of a sour"e BSC32 to a targetBSC6900+

!ownoad guides from te support website a""ording to te foowing tabe. and read

tem toroug/ before te swapping+

+uide &sed to

BSC32 to BSC6000 V900R00&C12

!ata pgrade Guide

pgrade BTS data from BSC32 to BSC6000 b/

using te BSC32%to%BSC6000 data upgrade too+

BSC6900 *C ;( ;perationGuide nterna se on/7

Guide te instaation and use of te BSC6900 *C;(+

C() V200R009??? nstaationGuide ,indows standaone mode7

Guide te instaation of te C() in standaonemode+

;peration Guide to te C() inStandaone (ode nterna se7

Guide te use of te C() in standaone mode+

BSC6900 GS( ;(Administration Guide

Guide te -ersion instaation and debugging of newBSC6900s+


7/17

' Swapping S"ripts on te C() Guide to Swapping BTSs from BSC32 or BSC6000 to

GBSC6900 V900R011

$"$ Insta,,in! Too,s and oftware nsta te atest BSC32%to%BSC6000 data upgrade too on te o"a *C+ Te data

upgrade too is named BSC32ToBSC6000DataUpgradeTool(for

BSC6000V900R008C12)+ #ou "an downoad it from te foowing website=ttp=@@support+uawei+"om@support@pages@edition"tr@"ataog@SowVersion!etai+doa"tion5ag"i"odeDpEineDnode000001'0161'D"o!R;;T,)BFC;000000006D+

nsta te BSC6900 *C ;( software on te *C and run it on tria a""ording to se"tion

3+1. se"tion 3+2. and se"tion 3+' in teBSC6900 PC OMU Operation Guide (InternalUse)+

nsta te mat"ing C() in standaone mode of te BSC6900 V900R011 on te *C

a""ording to te CME V200R009 Installation Guide (!indo"s standalone #ode).were. V200R009is a C() -ersion mat"ing te BSC6900+

$"% Bac-in! &p BC./00 Data1+ nsta and debug te software and ardware of BSC6900 V900R011C00 a""ording to

>S"enario= Creating a BSC6900 )> in te BSC6900 GSM OMU d!"#"$trat"o#G%"de+ Tis step is e4"uded in tis guide+

2+ Configure te BSC6900 "abinet. subra"s. boards. A interfa"e signaing. A interfa"etransmission. Gb interfa"e signaing. and Gb interfa"e transmission a""ording to tepan+ f an e4terna *C is used. /ou aso need to "onfigure *b interfa"e signaing and*b interfa"e transmission+ n B(@TC separated mode. /ou need to "onfigure Aterinterfa"e transmission and Ater interfa"e signaing in remote TC mode7+

3+ )nter te e4terna * address of te "reated BSC6900 in te ) address bar on te *C.

and "onne"t to te BSC6900+

'+ Cop/ te foowing "ommand to te "ommand input window. and run te "ommand tosa-e te data of te "reated BSC690 as a BC* fie+ Te BC* fie is stored in &o!%rootpat'!*$+*a!,er$"o#-aftp./portCM.S#+V"e . and is named

CM.CfgS#+V"e"pin "ompressed mode+ n te pat. &o!% rootpat'indi"ates teroot dire"tor/ for instaing te software of te BSC6900+

.45 CGS7:.; T


8/17

% &p!radin! BC DataCon'!uration

%"1 &p!radin! BC%$ Data Con'!uration toBC.000

pgrade te data "onfiguration of te BSC32 to te atest pat" -ersion of teBSC6000V900R00&C12B19 a""ording to teBSC$2 to BSC6000 V900R00%C&2 'ataUprade Guide. and sa-e te upgraded data "onfiguration as a fie named BSC6000Datadat+

!uring te upgrade. it is reHuired to "onfigure "ertain basi" BSC6000 de-i"es. A interfa"esignaing. and A interfa"e transmission+ #ou "an "ompete te "onfiguration a""ording to te

guide. or de"ompress te data "onfiguration fie see te foowing atta"ment7. use teBSC32%to%V900R00&C12 upgrade too to open te de"ompressed fie. and ten upgradeBSC32 data+

BSC6000-Basic-Dat

a.rar

%"$ &p!radin! BC.000 /00R001 or BC.000/00R00% Data Con'!uration to BC.000/00R002

*ro"edure

tep 1 :og in to te :(T of te od -ersion onine. and "oose Co#f"g%rat"o#I Ba+> UpI Ba+>Up GBM Data+ ;n te dispa/ed page. "oose to ba" up te fie to te o"a dis. enter afie name. and ten ba" up te fie+

5or BSC6000V900R001C01B063 or ater -ersions. te ba"up fie is stored to ?:MT "#$tallat"o#d"re+tor@V900R001C01B044Ba+>%pCfgDatawere.B0stands for te B -ersion number7+

;terwise. te fie storage pat is determined b/ te operator+


9/17


GBSC6900 V900R011

tep $ :og out of te :(T of te od -ersion. and ten og in to te :(T ofBSC6000V900R00&C12B19 offine+ Coose Co#f"g%rat"o#I Ope# :o+al Data "le+ nte dispa/ed Ope#diaog bo4. open te fie mentioned in Step 1+A diaog bo4 is dispa/edtaing te upgrade of te data "onfiguration fie of te BSC6000V900R001C01 as ane4ampe7. as sown in te foowing figure+

tep % Ci" 7e$. and wait ti an #for!at"o#diaog bo4 indi"ating Upgrade S%++e$$is dispa/ed.

as sown in te foowing figure+

tep ( Ci" OA+ Ten te data "onfiguration fie is upgraded+

tep 3 Coose Co#f"g%rat"o#I Ba+> UpI Ba+> Up :o+al Data+ Ten te :(T "e"s te datagoba/+ f te "e" fais. te data "annot be ba"ed up+ As a resut. te error information isdispa/ed+ n tis "ase. /ou need to ad$ust te data manua/ to ensure tat te data meets te"e" rues. and ten "oose Co#f"g%rat"o#I Ba+> UpI Ba+> Up :o+al Dataagain+ f te"e" is su""essfu. see"t a ba"up pat. enter te name of te ba"up data "onfiguration fiefor e4ampe. r8+12*19dat7. and ten e4e"ute te ba"up+ Te fie is ba"ed up to ?:MT"#$tallat"o# d"re+tor@V900R001C01B044Ba+>%pCfgDatawere.B0? stands for teB -ersion number7 b/ defaut+

2 8uawei *roprietar/ and Confidentia

Cop/rigt 8A,)

Te"noogies Co+. :td

ssue 01 2009%0'%307


10/17


GBSC6900 V900R011

Sapp"#g S+r"pt$ o# t'e C()

%"% &p!radin! BC.000 /00R002 DataCon'!uration to BC./00

#ou "an upgrade BSC6000 V900R00& data "onfiguration to BSC6900 troug te *C ;(or ;(+ Tis se"tion des"ribes tese two metods respe"ti-e/+

%"%"1 &p!radin! BC.000 /00R002 DataCon'!uration to BC./00 Throu!h the PC 4)&

To upgrade data "onfiguration troug te *C ;(. do as foows=

tep 1 ;n te *C instaed wit te BSC6900 *C ;( software. a""ess te !;S "ommand windowand enter #et $tart o!%dto start te *C ;( software and te database used during dataupgrade+

tep $ n te !;S "ommand window. enter #et $top o!%dto stop te ;( software+

tep % Cop/ te data "onfiguration fie named BSC6000Datadatof te BSC6000 to &o!%rootpat'*a!,er$"o#-a*"#*a!+ n tis pat. o#u rootpat*J indi"ates te root dire"tor/for instaing te *C ;( software+

tep ( n te !;S "ommand window. a""ess &o!% rootpat'*a!,er$"o#-a*"#*a!. and run tefoowing "ommand to run te upgrade too to upgrade te data "onfiguration fie of teBSC6000 to te BSC6900+ n te "ommand. different "oors are used to represent differentparameters+

data_upgrade.exe-v BSC6000V900R008C12B195-d .\BSC6000Data.dat-c-r

.\upgrade_rule\UD_RU!"_V900R008C12B195_V900R011C00SC#00_C$%%$&.x'l-'

.\upgrade_rule\%()C$%B(&"DC!*SSD"+_V900R008C12B195.x'l--ut --,'u_tpe$%Ua

--'a/_,'u_l,t21--peer_,'u_l,t2 --pre_c3ec4--rep,rt.err,r/7,.3t'l

Te parameters are des"ribed as foows=

*arameter 1= %- BSC6000V900R00&C12B19. indi"ating te origina -ersion number+

*arameter 2= %d +@BSC6000!ata+dat. indi"ating te name of te data fie of te origina

-ersion+

*arameter 3= %". indi"ating tat te upgrade rue fie of a spe"ifi" -ersion instead of te

defaut rues is used+

*arameter '= %r

+@upgradeErue@*!ER:)EV900R00&C12B19EV900R011C00S*CK00EC;((;+4m. indi"ating te used upgrade rue fie+

*arameter = %m+@upgradeErue@(TC;(B)!C:ASS!)5EV900R00&C12B19+4m:. indi"ating te"ass definition fie of te origina BSC6000 -ersion+

*arameter 6= %%ut. indi"ating a running error dispa/ed on te s"reen+

*arameter K=%%omuEt/pe;(a. indi"ating te ;( t/pe+ f te "urrent ;( t/pe is

;(b. set tis parameter to OMU*+ f te "urrent ;( t/pe is GBA(. set tisparameter to 5CSer,er+

*arameter &= %%mainEomuEsot21. indi"ating te sot number of te a"ti-e ;(+ Set

tis parameter a""ording to te a"tua sot+

*arameter 9= %%peerEomuEsot23. indi"ating te sot number of te standb/ ;(+ Set

tis parameter a""ording to te a"tua sot+ !eete tis parameter if no standb/ ;( is

"onfigured+


Cop/rigt 8A,)

Te"noogies Co+. :td

3


11/17


GBSC6900 V900R011

*arameter 10= %%preE"e". indi"ating tat te data "orre"tness "e" is performed+

*arameter 11= %%reportL+Merroinfo+tmL. indi"ating tat te "e" resut fie is

generated+ ,ere. erro"#fo't!lindi"ates te pat of te resut fie and "an be"ustomi


12/17

( wappin! cripts on the C)*After te data is upgraded to te BSC6900. te same metod is adopted to swap s"ripts on teC()+ Tis "apter des"ribes ow to swap te s"ript from te BSC32 to te BSC6900+

("1 )a-in! a wappin! cript on the C)*tep 1 ;n te *C instaed wit te C() in standaone mode. start te C()+

tep $ Cop/ te BSC32CM.CfgS#+V"e"pfie obtained inStep &in se"tion 3+3+1>pgradingBSC6000 V900R00& !ata Configuration to BSC6900 Troug te *C ;(> and teBSC6900CM.CfgS#+V"e"pfie obtained in se"tion2+3>Ba"ing p BSC6900 !ata> tote *C+

tep % mport te upgraded BSC32 data and te data of te new BSC6900 into te C() as foows=

;n te F%ae" CM ./pre$$page. "oose Data Ma#age!e#tI dd .. as sown in tefoowing figure+

;n te dispa/ed dd .page. enter an ) name for e4ampe. BSC327 and set Data "leto

BSC32CM.CfgS#+V"e"p. as sown in te foowing figure+


13/17


GBSC6900 V900R011

Ci" OAto import te data of te BSC32+ Adopt te same metod to import te data of teBSC6900. as sown in te foowing figure+

tep ( ;n te C() "onfiguration page. start BTS swapping+ #ou "an swap a te BTSs at a time orone b/ one+

See"t an ) from te na-igation tree. and ten "oose GSM ppl"+at"o#I Repare#t BTSBetee# BSC$. as sown in te foowing figure+

;n te dispa/ed Repare#t BTS Betee# BSC$page. set So%r+e BSCto BSC32and

De$t"#at"o# BSCto BSC6900. and ten "i" ddto see"t te BTS to be swapped. as sownin te foowing figure+

2 8uawei *roprietar/ and Confidentia

Cop/rigt 8A,)

Te"noogies Co+. :td

ssue 01 2009%0'%307


14/17


GBSC6900 V900R011


Ci" e/t. as sown in te foowing figure+

;n te Repare#t BTS Betee# BSC$page. "i" .d"t Repare#t "leand edit te fie on tedispa/ed page+ Te BSC32 does not support !??. * ;-er )1. and * fun"tions+ Terefore.

/ou "an desee"t te "orresponding "e" bo4es to redu"e te data to be edited. as sown inte foowing figure+


Cop/rigt 8A,)

Te"noogies Co+. :td

3


15/17


GBSC6900 V900R011

After tat. ad$ust ree-ant data on -arious tab pages a""ording to te a"tua panning+ Toensure tat te BTS inde4. "e inde4. and TR? "e spe"ified manua/ after te swapping aredifferent from te e4isting BTS inde4. "e inde4. and TR? "e of te BC6900. deete teree-ant "oumn on te "orresponding tab page+

;n te BTStab page. deete e BTS D. as sow in te foowing figure+

;n te GC.::tab page. deete e Cell d. as sow in te foowing figure+

;n te GTR4tab page. deete e TR4 d. as sow in te foowing figure+

' 8uawei *roprietar/ and Confidentia

Cop/rigt 8A,)

Te"noogies Co+. :td

ssue 01 2009%0'%307


16/17


GBSC6900 V900R011


After tat. sa-e and "ose te fie+ ;n te dispa/ed F%ae" CM ./pre$$page. "i" e/ttoswap data+

tep 3 After data swapping. "oose Data Ma#age!e#tI ./port #+re!e#tal S+r"pt$on te

F%ae" CM ./pre$$page to e4port te swapping s"ripts. as sown in te foowing figure+

;n te dispa/ed ./port #+re!e#tal S+r"pt$page. see"t te s"ript e4port dire"tor/. as

sown in te foowing figure+


Cop/rigt 8A,)

Te"noogies Co+. :td


17/17


GBSC6900 V900R011

Te s"ripts of bot te BSC6900 and te BSC32 are e4ported+ SubseHuent/. owe-er. tes"ript of te BSC6900. tat is. MBSC-BSC6900t/t . is reHuired+ Te s"ript fie name"ontains te ) name entered in Step 3+

("$ Runnin! the wappin! cripttep 1 Cop/ te e4ported swapping s"ript of te BSC6900 in Step in se"tion '+1>(aing a

Swapping S"ript on te C()> to &o!% rootpat' !*$+*a!,er$"o#-aftpon te "reatedBSC6900+

tep $ n te ) address bar on te *C. enter te e4terna * address of te "reated BSC6900. "onne"tto te BSC6900. and run te foowing "ommand to "ompete data swapping=

RU BTCF:.; SRC

Guide to Swapping BTSs from BSC32 or BSC6000 to BSC6900£¨V900R011£©-20100930-A-V1.0

Documents

Transcript of Guide to Swapping BTSs from BSC32 or BSC6000 to BSC6900£¨V900R011£©-20100930-A-V1.0