GUCS (Groupe Utilisateur CATIA/ Smarteam )
description
Transcript of GUCS (Groupe Utilisateur CATIA/ Smarteam )
GUCS (Groupe Utilisateur CATIA/Smarteam)
CATIA FORUM 08 DECEMBER 2011
Overview
GUCS PLMWG GrACQ in 2012 External contact Follow-up enhancement request Data Reminder
Y. Muttoni 9e Catia forum 08/12/2011
Y. Muttoni 9e Catia forum 08/12/2011
GUCSMembers: Y.Muttoni, T.Klioutchinikova, M.Timmins1 invited: C.Delamare
PLM-WGA.Bertarelli, S. Chemli, S.Bally, S.Petit, D.Widegren
Mandate:Put the interest of the users in the foreground and make sure the tools match the needs.
Mandate:The PLM WG is to define processes needed for efficient life-cycle management of CAE data at CERN and is to coordinate the adoption, use and evolution of these processes throughout the organization.
Meetings:-Weekly meetings: Discuss priorities, particular enhancement and problems.-Monthly meetings with your local correspondents: communication upstream and downstream, consultations.
Meetings:- Twice a week for 2010- Weekly meetings in 2011
Monthly communal meetings between GUCS and PLMWG to discuss issues such as document life cycles
Y. Muttoni 9e Catia forum 08/12/2011
GUCSMembers: Y.Muttoni, T.Klioutchinikova, M.Timmins1 invited: C.Delamare
PLM-WG (2012 proposal)S.Bally, S. Chemli, S.Petit, P-o. FrimanM.Timmins (GUCS), P. Trilhe (GrACQ), G. Villiger
Mandate:Put the interest of the users in the foreground and make sure the tools match the needs.
Mandate:The PLM WG is to define processes needed for efficient life-cycle management of CAE data at CERN and is to coordinate the adoption, use and evolution of these processes throughout the organization.
Meetings:-Weekly meetings: Discuss priorities, particular enhancement and problems.-Monthly meetings with your local correspondents: communication upstream and downstream, consultations.
Meetings:-Twice a week for 2010- Weekly meetings in 2011- The specification “Product Data Lifecycle at CERN” should be presented at users in 2012
Monthly communal meetings between GUCS and PLMWG to discuss issues such as document life cycles
Y. Muttoni 9e Catia forum 08/12/2011
GrACQP. Trilhe, D. Perini, M.Timmins(GUCS), D. Steyaert, G. Villiger, L. Faisandel, P. Moyret, D. Pugnat, S. Maridor, B. Nicquevert, S. Bally (PLMWG), F. Borralho, M. Garcia Carnero
Mandate:Define rules and practices to designer and project engineer to produce drawings in the better quality.
Meetings:-Weekly meetings
Regular communal meetings between GUCS and GrACQ to discuss issues such as cartouche modification.
External contact 150 Catia users
Catia V5 – Smarteam since 2004
Y. Muttoni 9e Catia forum 08/12/2011
Next step : Video conference on specific topic◦ Methodology◦ Reverse engineering ◦ Life data management◦ Next release CATIAV5/Smarteam◦ Training
Y. Muttoni 9e Catia forum 08/12/2011
External contact
Y. Muttoni 9e Catia forum 08/12/2011
External contact
Regular meetings at Lyon 4-5 times per year on CATIA/Smarteam. Necessary to have with IN2P3 a common version of CATIA.Thanks for their presentation in this forum.
Y. Muttoni 9e Catia forum 08/12/2011
External contactCern participants
•3 Mechanical designer•2 Integration designer•2 Support CAD
•Caec chairman•GS-ASE group leader•GUCS Chairman
Contact with external firms
Pedretti Airlight Energy ManufacturingJulius Blum Smarteam/Enovia V6ALSTOM Engineering processTechviz Visualization solutions for 3D applicationsFraunhofer Process and Methodology
Present for users: CATIA V5 - Smarteam
Future for users: CATIA V6 – Enovia V6
and Dassault Time to be defined
4-5 years???Necessary to keep an eye on it
REQUESTS FOLLOW-UP (1/2)Enhancement Request Who Delivere
dStill expected in 2011
2012
R20 deployment (almost completed) GUCS x xExternalisation tool for sub contracting GUCS xLifecycles on objects PLM xCDD number removed upon save-as GUCS xMass in SMT GUCS x2D pdf for archived and non archived drawings.
GUCS x
Multi-printing for non archived drawings PLM x3d viewers (external and internal) PLM xCAD Data Navigator (replacement of CWN) PLM x
Y. Muttoni 9e Catia forum 08/12/2011
REQUESTS FOLLOW-UP (1/2)Enhancement Request Who Delivere
dStill expected in 2011
2012
Hot fix and new test users Ok GUCS x xMissing installation module by IT GUCS xLifecycles on objects – Mechanism tested PLM xIn dev to be tested GUCS xMass in SMT OK for the part GUCS x2D pdf for archived and non archived drawings. 1271generated files after 1 month
GUCS x
Not yet started PLM xTest on 3D Via composer player Ok PLM xReady in development PLM x
Y. Muttoni 9e Catia forum 08/12/2011
REQUESTS FOLLOW-UP (2/2)Enhancement Request Who Delivere
dStill expected in 2011
2012
Document Types Classification : 3DBE, 2DBE, 3DBM, 2DBM, 3DFEA, etc.
PLM x
Access Rights through e-groups and CAD-Teams
PLM x
Project Structure on LHC Equipment Codes PLM xSynchronisation of Statuses between CDD and SmT
PLM x
Y. Muttoni 9e Catia forum 08/12/2011
https://espace.cern.ch/cad-service/default.aspx
REQUESTS FOLLOW-UP (2/2)Enhancement Request Who Delivere
dStill expected in 2011
2012
The process should be defined PLM x
Access Rights through e-groups and CAD-Teams
PLM x
Project Structure on LHC Equipment Codes PLM xWho is the master? the drawing or the 3D model?
PLM x
Euclid-Migrated Models Geometry Correction Tool
GUCS x Beta
Software GPURE in production (Simplified 3D model)
GUCS x
Y. Muttoni 9e Catia forum 08/12/2011
https://espace.cern.ch/cad-service/default.aspx
On request of the EN department leader a list of the top enhancement requests will be provided for year 2012
DATA
Y. Muttoni 9e Catia forum 08/12/2011
150 Users produce the data
The past has shown the need to clean up data regularly remind the vms to unix transition and the CAD migration from Euclid to Catia.
When you start a new design (part or product) check if the model does not exist in smarteam.
A cleaning of the vacuum equipment 3D model has started in smarteam.
Clean your 3D model not used and not useful.Using the 3D models catalogue.
Reminder
Y. Muttoni 9e Catia forum 08/12/2011
Do not forget to discuss with your local correspondent. We meet them once a month. Map link local correspondentThe methodology task is on the way R. Betemps will make a presentation at the next forum.Smarteam refresh course is always available for all the users having followed the standard course.In case of problems use the CAD Support mail. The GUCS members read them regulary.The CATIA forum is for you but to continue we need you (topics, ideas, news…).
Y. Muttoni 9e Catia forum 08/12/2011
Thank you for your attention
Special thanks to Jean-Pierre for the forum CATIA organization
Questions?
Y. Muttoni 9e Catia forum 08/12/2011