GSM OMCR Operations and Maintenance Guide.doc

7/23/2019 GSM OMCR Operations and Maintenance Guide.doc

1/77

GSM OMCR Operations and Maintenance Guide

Documentnumber

Productname

Applicablefor

Productversion

Drafted by Document

version

GSM OMCR Operations and Maintenance

Guide

Preparedby:

Tang Qingliang Date: 2011/1/1

Reviewedby:

Date:

Reviewedby:

Date:

Approvedby:

Date:

Huawei ec!nolo"ies Co#$ %td#

All ri"!ts reserved

Huawei Technologies Proprietary 1


2/77


Revision Record

Date Revision

Version

Change Description Author

2011-1-1 ritten Tang !ingliang



3/77


Contents

1 Overview...................................................................................1-5

1"1 #$out this %ocu&ent""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""1-'

1"2 (ntended )sers"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" """"1-'

1"* GSM syste& (ntroduction"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""1-'

1"+ OMCR Ser,ices Regulations""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""1-

2 BSC6!! "#$ Operations............................................................2-5

2"1 MM. Co&&ands""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""2-'

2"1"1 (ntroduction to MM. co&&ands""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" """""2-'

2"1"2 Ma/e MM. Co&&ands""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" """2-'

2"1"* Run Script in atch"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""2-

2"2 #lar&s"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""2-

2"* %e,ice Maintenance"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""2-11

2"*"1 Monitor Channel status"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""2-11

2"*"2 .oc/3 )nloc/ TR4""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""2-12

2"*"* Monitor (nter5erence and""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""2-1*

2"+ Trace"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" """""""""" "2-1+

% #2!!! Operations....................................................................%-15

*"1 (ntroduction to M2000""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""*-1'

*"2 #lar&s"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""*-1

*"* Measure&ent Settings""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""*-1

*"+ )ser-de5ined Counter Manage&ent""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""*-1

*"' !uery Result"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""*-16*"'"2 O$7ect Settings""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""*-20

*"'"* Counter settings"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""*-21

*"'"+ Other Settings""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" "*-21

*"'"' .ine Chart""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""*-22

*" MM."""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""*-2*

& C#' Operations.......................................................................&-25

+"1 (ntroduction to CM8"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""+-2'

+"1"1 How to login to CM8""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""+-2'

+"1"2 Plan #rea and Current #rea"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""+-2

Huawei Technologies Proprietary *


4/77


+"2 Para&eter change""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""+-26

+"* 9eigh$or Operations""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""+-*'

+"*"1 9eigh$or Re,iew in CM8"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""+-*'

+"*"2 9eigh$ors Con5iguration"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""+-*'

+"+ Para&eters 8:port""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""+-*

5 (RS Operations........................................................................5-&1

'"1 (ntroduction to PRS""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""'-+1

'"2 O$7ect Group Manage&ent""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""'-+2

'"2"1 %e5ine O$7ect Group""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" ""'-+2

'"2"2 8:porting O$7ect Group"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" ""'-+

'"* Per5or&ance Report Manage&ent""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""'-+6

'"*"1 %e5ining Report"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""'-+6

'"*"2 8:cel Te&plate Manage&ent"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" ""'-'

'"+ !uerying Report"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""'-*

'"' ;P( #nalysis"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" "'-

6 Routine Data Co))ection............................................................6-*%

"1 C


5/77


1 Overview1.1 A+out this Docu,ent

This docu&ent is designed to guide R< engineers in GSM OMCR operations and &aintenance

the tools" This docu&ent is e:perience su&&aries which can &a/e users start their wor/easier" see the

tool help 5ile or product docu&ent"

The related so5tware ,ersion &entioned in the docu&ent is showing as $elow?

M2000? @200R006C00SPC202

SC? @600R01189GC00SPH2

PRS? @100R00'C00SPC020

CM8? @200R006C02SPC220

1.2 ntended sers

This guide is dra5ted 5or radio networ/ planning and opti&iAation engineers"

1.% /S# s0ste, ntroduction

The GSM syste& structure is showing as 5ollowing> the radio planning and opti&iAation

&ostly 5ocus on the SS part"

Huawei Technologies Proprietary '


6/77


di55erent OM client> the (P addresses &ostly are di55erent> the user

na&e and password are also di55erent" They are &anaged and distri$uted $y OMCad&inistrator" 8,ery OMCR should 5ollow the rules o5 the OMC"

there are 2 SCs in one networ/> the (P addresses> user na&es and passwords

li/e the 5ollowing ta$le?

Ta$le 1? eBuip&ent (P address and &aintenance account e:a&ple

1.& O#CR Services Regu)ations

R< engineers wor/ in the OMCR should 5ollow the OMCR regulations> and pay attention to

$elow points?

1 #s/ 5or custo&erDs per&ission $e5ore entering the eBuip&ent roo&" Register the

carry-on articles while going in or out o5 the eBuip&ent roo&"

Huawei Technologies Proprietary


7/77


2 Strictly a$ide $y custo&erDs rules and regulations" &a/e sure whetherthe custo&er reBuires you to put on a shoe co,er $e5ore entering the eBuip&ent roo&"

* S&o/ing> ga&e playing and operating the eBuip&ent pro,ided $y other ,endorswithout per&ission in the eBuip&ent roo& are strictly 5or$idden"

+ (tDs 5or$idden to access to the internet we$sites which are not related to the on-siteser,ice"

' 8Buip&ent operation and &aintenance are not allowed without custo&er per&issionand acco&panyingE in principles> te&porary account and password pro,ided $y

custo&ers should $e used 5or this purpose" The use o5 super-password $e5ore

custo&ers is 5or$idden" (n principle> the operation should $e within the scope o5

operation appro,ed $y custo&ers" 8:ceptional operations should $e applied tocusto&ers and e:planations on possi$le i&pacts should $e pro,ided"

(5 the eBuip&ent runs nor&ally> do not per5or& any dangerous operations during pea/hours and periods 5or the appraisal o5 co&&unication inde:es or periods o5

co&&unication assurance" Clean up the site a5ter the ser,ice is co&pleted to /eep the eBuip&ent roo& tidy and

cleanE



8/77


2 BSC6!! "#$ OperationsThe .MT pro,ides graphical user inter5ace FG)( 5or you to operate and &aintain theSC600 on the we$ page" ou can per5or& the alar& &anage&ent> trace &anage&ent>

per5or&ance &onitoring> and de,ice &aintenance through &enu operations" ou can also runthe MM. co&&ands and read the corresponding e:ecution results on the .MT"

2.1 ##" Co,,ands

2.1.1 ntroduction to ##" co,,ands

#n MM. co&&and consists o5 two parts? action and o$7ect> 5or e:a&ple> ADD OP> wherein

#%% is the action and OP is the o$7ect" Gi,en $elow listdescri$es the actions that can $eper5or&ed through MM. co&&ands" So&e use5ul action 5or the re5erence?

Action Description

ACT Activate

ADD Add

CHK Check

CMP Compare

DSP Display

LST List

MOD Modify

RMV Remove

SET Set

Ta$le 2? description o5 so&e use5ul co&&ands

2.1.2 #ae ##" Co,,ands

Select one 98 5ro& iManager M2000 o5 sa&e ,ersion 5or which MM. co&&ands need to $e

e:ecuted" #5ter that we$ $rowser open and you chose MM. section to create the script

snapshot will help you how to do wor/ and &a/e the script"

Step 1?



9/77


.ogin Main Topology o5 iManager M2000> select on 98 in which you want to run the script

Step 2?

Choose MM. 5ro& the ta$E input the co&&and in Co&&and (nputI $o:> and then 8:ecI"



10/77


2.1.% Run Script in Batch

Copy the script and paste your script in the #TCH ta$ then press the $utton o5 GO to e:ecute

thescript the script will run and success5ully co&plete" (5 any pro$le& occurs then script willstop and tell you where and which line o5 script ha,e error then you go to e:ecution type $o:

and chose the option o5 Run 5ro& line and enter the line nu&$er 5ro& where error occurs" (5

you success5ully run the script and para&eter change o55 all the cells o5 98"



11/77


2.2 A)ar,s



12/77


This descri$es how to &anage SC600 alar&s through the .MT" Through the alar&&anage&ent> you can analyAe the alar&s &ore e55iciently to 5acilitate the trou$leshooting"

(5 you want to ta/e all alar&s o5 the 98> you si&ply press the re5resh $utton then press thesa,e all records $utton to sa,e the alar&s records in your PC"

(5 you want to Buery the alar& logs> you can choose the !uery #lar& .ogI ta$" you can select the alar& type and alar& se,erity as well> then you

chose the site and press the $utton o5 !uery the result will $e shown on your syste& a5ter that

you sa,e the record"



13/77




14/77


2.% Device #aintenance

(n this ta$ we can chec/ the li,e status o5 the site 5ro& Monitor channel status" e can chec/the &onitor channel inter5erence $and and also &odi5y ad&inistrati,e status in which we can

loc/ the Cell> TR4> and Channel"

2.%.1 #onitor Channe) status



15/77


2.%.2 "oc n)oc $R3



16/77


2.%.% #onitor nter4erence Band

(n Monitor (nter5erence $and we can chec/ the inter5erence on the channel there are ' type o5inter5erence $and"

Huawei Technologies Proprietary 1*


17/77


2.& $race

Trace &anage&ent is per5or&ed in the routine &aintenance o5 eBuip&ent" ou can trace the&essages on the inter5aces and signaling lin/s to ,eri5y data and locate 5aults" %o not start

e:cessi,e tracing tas/s when the tra55ic load is high" Otherwise> the .MT response speed is,ery slow" (n this case> set Trace Mode to Save To OMU when you start a tracing tas/"

Huawei Technologies Proprietary 1+


18/77


%#2!!! Operations

The M2000 is a centraliAed ele&ent &anage&ent syste& F8MS o5 huawei &o$ile networ/s" (t

&anages &o$ile 98s in a centraliAed &anner"

%.1 ntroduction to #2!!!

The M2000 pro,ides the 5ollowing 5unctions?

o. a,e Description

System o"tp"t#i$do#

The time displayed is the timeof the clie$t% The lo&' fa"lt' a$dsec"rity i$formatio$ is provided(y the server% Therefore' thedisplayed time is the time of theserver%

) Me$" *ar

The me$" (ar sho#s the mai$

me$" of the system%

Huawei Technologies Proprietary 1'


19/77


+ Stat"s (ar

The stat"s (ar displays thec"rre$t stat"s i$formatio$ a(o"tthe system' s"ch as the c"rre$t"ser a$d the ,P address of the

co$$ected server%

- Tool(arThe tool(ar sho#s the shortc"tico$s for key operatio$ tasks%



20/77


%.2 A)ar,s

#lar&s are classi5ied into critical> &a7or> &inor and warning se,erities" This section descri$eshow to adopt corresponding processing policies 5or di55erent alar& se,erities and rede5ine the

alar& se,erities"1" Choose MonitorJ Query Alarm Listor .ogs 5ro& the &ain &enu> or clic/

on the tool$ar"

2" (n the Filter dialog $o:> set the alar& Buery conditions"

*" Choose Monitor J Query Alarm Event all procedure is sa&e only there 5ilter $o: ha,e

no Status Ta$le and clearance ti&e"

F1 Select one or &ultiple options in the chec/ $o:" #ll the options are selected $y de5ault"

F2 Select one or &ultiple options in the chec/ $o:" #ll the options are selected $y de5ault"

F* Start Time? To Buery the alar&s3e,ents that are raised or Cleared later than this ti&e"

End Time? To Buery the alar&s3e,ents that are raised or cleared earlier than this ti&e"

Latest? To Buery the alar&s3e,ents that are raised or cleared in the latest hours> days>wee/s> or &onths

F+ Alarm Source? ou can select the sites or 98s"

Advanced? #d,anced para&eters o5 the alar&s that you want to Buery"

Copy From Template? To copy the 5ilter conditions stored in the copy te&plate"



21/77


Save Template? To sa,e the current settings in a te&plate"

Reset? To restore the para&eters 5or alar& Buery to the de5ault settings"

%.% #easure,ent Settings

%.& ser-dened Counter #anage,ent



22/77


%.5 7uer0 Resu)t

1" Choose Perormance J Query Result> or clic/ " The Query Result window is

displayed"

2" Clic/ !e" Query> or right-clic/ any node e:ceptOMCin the na,igation tree> and then

choose !e" Query5ro& the shortcut &enu"

(5 you &ust sa,e the latest Buery conditions as a te&plate> you can clic/ Condition to

,iew the Buery conditions that are set 5or last operation"

*" On the O#$ect Settin%s> Counter Settin%s> and Ot&er Settin%s ta$ pages> set theconditions 5or Buerying the &easure&ent results"

+" Clic/ Save Template"

'" (n the displayed Save asdialog $o:> enter the na&e o5 the new te&plate"

The te&plate na&e is co&posed o5 up to + characters> including nu&erals> spaces>

8nglish letters> and so&e special characters K L N F > " E and underlines"

" Select a su$directory in the directory tree to store the new te&plate"

ou can right-clic/ the na,igation tree> and then choose Create Dir 5ro& the shortcut

&enu to create a new su$directory"

" Optional? Select Set deault template to set the te&plate as the de5ault te&plate"

#5ter that> &easure&ent results are Bueried $y the conditions in the de5ault te&plate e,ery

ti&e you open the Query Resultwindow"

" Clic/ O'to sa,e the te&plate"



23/77


F1 9a,igation Tree? 9a,igation tree o5 the result Buery te&plates" )ser te&plates>

which help the& to get result 5ast"

F2 Ta$le? %isplays Buery results in a ta$le"

F* utton $ar? Pro,ides the 5unctions o5 setting new Buery conditions> ,iewing thede5ined Buery conditions> these $uttons will ena$le a5ter getting the stat with clic/ing

you can &o,e Measurement Statuswindow> Buerying &issing results> and closing the

acti,e window"

%.5.2 O+8ect Settings

Search 5or a &easure&ent o$7ect in the &easure&ent o$7ect na,igation tree $y entering the /eyin the &easure&ent o$7ect na&e and then clic/ing Find"



24/77


%.5.% Counter settings

Search 5or a &easure&ent Counter in the &easure&ent Counter na,igation tree $y entering

the /ey in the &easure&ent o$7ect na&e and then clic/ing Searc&"(n the Availa#le Counters area> the counters that are not set 5or per5or&ance &easure&ents

are in grey"The nu&$er o5 selected counters that are already set 5or &easure&ents should not e:ceed 1'0"

(n the Selected Counters area> the nu&$er o5 selected counters is displayed"

%.5.& Other Settings



25/77


F1 Continuous Ti&e Mode is chec/ $y de5ault> you should chec/ Section Ti&e Mode i5 you

want to get results within separate ti&e seg&ents"

you can set a &a:i&u& o5 three ti&es seg&ents" The startti&e o5 each ti&e seg&ent &ust $e earlier than the end ti&e" The start ti&e o5 the ne:t

ti&e seg&ent &ust $e later than or the sa&e as the end ti&e o5 the current ti&e seg&ent"

F2 %ate Range #ll

!ueries all the &easure&ent results o5 certain counters under the selected o$7ects $ased

on the Buery te&plate"

Today

!ueries the &easure&ent results o5 certain counters under the selected o$7ects within thecurrent day $ased on the Buery te&plate"

esterday

!ueries the &easure&ent results o5 certain counters under the selected o$7ects within the

last day $ased on the Buery te&plate"

Speci5ic

!ueries the &easure&ent results 5or certain counters under the selected o$7ects within a

speci5ied ti&e seg&ent $ased on the Buery te&plate" (n this case> Start Time and End Time&ust $e set"F* Period? we are using &ostly * Period

1' &inutes

0 &inutes

2+Hours

F+ Mostly we use de5ault ,alue in Sortpart"F' y clic/ing Query$utton> we can get the results> or E(port todownload the data"

%.5.5 "ine Chart

There are * ,iew result type? Ta$le> .ine Chart> and ar chart"



26/77


Ta$le? e can get the detailed result $y ta$le type" (5 you li/e to analysis $y 8:cel 5or detailedanalysis> this is the $est way"

.ine chart and ar chart? e can analysis the results easily $y line chart and $ar chart type"

e can &a/e the report easier> also sa,e lots o5 ti&e to &a/e the chart $y oursel,es"There are 2 types in .ine chart? $y o$7ect and $y counter"

%.6 ##"

MM. is inter5ace where we can do wor/


27/77


F1 #ll 98s are showing on that $o: you can select one or &ultiple 98s"

F2 MM. Co&&and indow> you can Search Co&&and also"

F* (nput $o:?

a" Generate (nput (nter5ace$" 8:ecute !uery


28/77


& C#' OperationsCM8 FCon5iguration Manage&ent 8:press is a Huawei Tool used 5or the con5iguration" (t

can $e used 5or the con5iguration o5 cell sites" CM8 wor/s in Parallel with iManager M2000"(t &eans we cannot use CM8 until we login to M2000 ser,er" (n CM8> we can create TS>

con5igure or &odi5y Cell para&eters> 5reBuencies etc" asically what CM8 does is it creates

MM. scripts 5or e,ery action that we per5or& on the Cell3TR4" (n the end> we can use these

MM. co&&ands to actually apply those actions3changes"

This chapter is &ade with respect o5 R< 8nd" (t does not co,er the topics which are related to

the SS end"

&.1 ntroduction to C#'

&.1.1 9ow to )ogin to C#'

To login to CM8> open iManager M2000> go to Maintenance Ta$CM8E

Huawei Technologies Proprietary 2'


29/77


&.1.2 ()an Area and Current Area

1" Current #rea? we can only ,iew the 98s and its para&eters> any type o5 &odi5ication

is not allowed" So i5 we want to see so&e para&eter ,ales> it is $etter to use the

current area> use o5 planned area is not reco&&ended in order to a,oid unwanted

changes in the data$ase"

To open the current area> go to Area Mana%ementOpen Current



30/77


2" Planned #rea? (5 we want change the ,alues o5 any para&eterE we can use the planned

area"

F1 See the $elow i&ages to /now how a planned area is created"

F2 Gi,e a na&e to your planned area> and select the 98s that you want to include in the

planned area"



31/77


F* Clic/ the O; $utton> and it will start processing"

F+ e can swap $etween the current and planned are according to our reBuire&ent"

elow i&age shows how to swap $etween the current and planned are"



32/77


*" #rea SynchroniAation? CM8 does not support auto&atic synchroniAation o5 %ata$ase>we ha,e to synchroniAe &anually" SynchroniAing all the 98s at a ti&e is 9OT

R8COMM89%8% $ecause it can cause the OM. .in/ to get congested"

&.2 (ara,eter change

e will show the steps to &a/e the cell le,el para&eter change as an e:a&ple"

1" Right clic/ the cell you want to per5or& the para&eter change in plan area> and select

Cell Coni%uration E(press"

2" (n cell Con5iguration e:press window> we can see all the cell le,el para&eters e"g" (dle

Mode Para&eters> Call Control Para&eters> Hando,er Para&eters etc" See elowE



33/77


% Sho#s Cell .ame)% Details of the Cell /Cell ,$de0' Cell ,D etc1+% Parameter Cate&ories-% Parameter list of the co$cer$ed Cate&ory

1" Go to the desired para&eter you want to change" i5 we want to change thepara&eter Concentric Circle HO #llowedI> go to Hando,er Para&eters> clic/ on HO

asic Para&eters" # list o5 related para&eters is displayed on the right side o5 the window"


34/77


2" #5ter &a/e the changes> clic/ on the cell and it will gi,e the $elow &essage" #nd thenClic/ esI to sa,e the changes you &ade in your Planned #rea"

*" 8:port the change script" Go to Area Mana%ementPlanned AreaE(port

)ncremental Script" See elowE

Or you can use the shortcut $utton to e:port your Script" See elowE

Huawei Technologies Proprietary *1


35/77


(t will display the 5ollowing window" ou can gi,e the desired path where you want your

script to $e sa,ed"

(n the a$o,e i&age you can see one option> .aunch the Script 8:ecuterI" (5 you chec/ thisoption> the CM8 will ta/e you to the Script 8:ecuter window auto&atically> $ut you will not

$e a$le to copy or edit your script there"

+" Run the script"Right clic/ on your pro7ect in the script 8:ecuter indow> Activate

Pro$ect*rea+ on Failure"



36/77


The *rea+ on FailureI Option will stop the script i5 it 5inds error in so&e co&&and"Otherwise i5 you choose the *est EortI Option> CM8 will e:ecute all the co&&ands>

s/ipping the co&&and that contains the error"

(t will show the 5ollowing dialogs i5 success5ul"

'" e can /eep the option o5 launc& t&e Script E(ecuterI unchec/ed" hat it will do iswill sa,e the script in a "t:tI 5ile on your desired path" ou can copy that script and run in

the MM. when you reBuire" hen you clic/ e:port> it will display a lin/> where your

Script is sa,ed in Te:t 5ile"

Huawei Technologies Proprietary **


37/77


&.% eigh+or Operations

Huawei Technologies Proprietary *+


38/77


&.%.1 eigh+or Review in C#'

Open Cell Con5iguration 8:press*SC ,- !ei%or Cell> you can get the 2G neigh$ors o5

that cell"

9ote? CM8 shows the neigh$or relations $y Cell (nde:> so it is $etter to see the neigh$ors

5ro& MM. as there you can see the neigh$or relations $y Cell 9a&es"

&.%.2 eigh+ors Conguration

1" Right clic/ on Cell 9a&e!ei%orin% Cell Coni%uration E(press.and then youcan add3delete neigh$or relations or change Cell to Cell Para&eters"

Huawei Technologies Proprietary *'


39/77




40/77


&.& (ara,eters ':port

1" Go to GSM #pplications Ta$E(port Cell Parameter Data

2" Select Cells" There are 2 &odes $y cellI and $y 98I can $e chosen"



41/77


*" Select #ttri$utes" Select the para&eters you want to e:port"



42/77


+" Select the 5ile type and 5ile path you want to sa,e the para&eters> and then clic/ !e(tor

Finis&to e:port the data"



43/77


Huawei Technologies Proprietary +0


44/77


5 (RS OperationsThe PRS is a plat5or& 5or &onitoring and analyAing the per5or&ance data o5 &o$ile networ/s>

custo&iAing reports> and displaying reports" The PRS is used 5or the 5unctions such as routine

operation and &aintenance o5 the &o$ile networ/"

(t ena$les users to aggregate and store data $ased on &ultiple di&ensions" (t supports the

long-duration storage and e55icient Buery o5 data"

(t pro,ides ,arious prede5ined reports> which are used 5or &onitoring and analyAing the

operating status o5 networ/s"

The PRS ena$les users to custo&iAe ;P(s and reports> generate and distri$ute reports as

scheduled> Buery reports $ased on &ultiple di&ensions such as o$7ect> ti&e> andproperties> and &anage dash$oards> and thus i&pro,ing the wor/ e55iciency o5 networ/

opti&iAation engineers and operation and &aintenance FOM engineers"

5.1 ntroduction to (RS

The PRS supports 5le:i$le operations 5or Buerying and collecting ;P( statistics" ou can

Buery the ;P(s at o#$ect or timedi&ensions"

Support the ;P( analysis" ou can Buery results o5 ;P(s at time ando#$ect dimensionswithout creating a report

Support the scheduled generation and distri$ution o5 reports" ithout starting the PRS client>

you can o$tain the reports 5ro& the the PRS can Buic/ly respond to

your OM reBuire&ents"

Co&&on Operations o5 Report #d&inistrators?



45/77


a" Custo&iAing ReBuired Counters

$" Custo&iAing usy Hours

c" Custo&iAing ;P(s

d" Creating Reports

e" Setting the Correlations etween Reports and 8:cel Te&plates

5" %istri$uting Reports Periodically

5.2 O+8ect /roup #anage,ent

5.2.1 Dene O+8ect /roup

The Purpose o5 de5ining O$7ect Group is to use the& while Buery o5 selected cells3 Culprit

cells> regions or clusters de5ine in 5or& o5 o$7ect group"

#5ter de5ining O$7ect Group we can Buery through Report Manage&ent o5 speci5ic counter at

once $y clic/ing !uery3 !uery $y Condition"

Here introduce how to de5ine the cell group> the &ethod to de5ine SC and other groups are

si&ilar"

1" Go to Per5or&ance ReportO$7ect Group Manage&ent



46/77


2" Right clic/ GCell> #ddO$7ect Group9e:t

Huawei Technologies Proprietary +*


47/77


*" Select o$7ect type" Clic/ 9e:t to select SC Qs3 Speci5ic Culprit Cells 5or cell group

analyAing"

Huawei Technologies Proprietary ++


48/77


Huawei Technologies Proprietary +'


49/77


+" Pro,ide the na&e and category o5 analysis> and then clic/ 9e:t to 5inish"

Huawei Technologies Proprietary +


50/77


5.2.2 ':porting O+8ect /roup

The Report properties o5 the o$7ect group can $e e:ported to get detail o5 de5ine in5or&ation

in any Gcell Group te&plate" Procedure 5or e:porting is as $elow"



51/77




52/77


5.% (er4or,ance Report #anage,ent

#5ter the ele&ent &anage&ent syste& F8MS collects the data o5 per5or&ance counter data

5ro& 98s> the data collection &odule o5 the PRS periodically collects the data and sa,es it in

a 5ile> and i&ports the data in the 5ile to the report data$ase" (n this way> the PRS ena$les youto learn the current networ/ status $y Buerying and &onitoring the counter data"

5.%.1 Dening Report

e will &a/e a si&ple report as an e:a&ple in this part" The other type reports are si&ilar"

1" Right clic/ a root 5ile you want the report $elong to" !e"Simple Report> and then

!e(t"



53/77


"

2" Select the o$7ect type you want to de5ine> and then !e(t"

*" Set the Su$-report type" #nd input the su$-report na&e"

Huawei Technologies Proprietary '0


54/77


+" Select the counters which you need to e:port in the report"



55/77


'"


56/77


" Select Top 9 condition" This &a/es it easy to get the worst cells"

Huawei Technologies Proprietary '*


57/77


" Clic/ O;> and 9e:t> and then set the o$7ect that we need to output in the report te&plate"

9ote? The o$7ect we de5ine here is 5or the te&plate> we can select the &ostly using o$7ectin this report te&plate" Howe,er> we can select the other o$7ect as well when Buery this

te&plate"

Huawei Technologies Proprietary '+


58/77


" Set the ti&e condition in the report te&plate"

9ote? The o$7ect we de5ine here is 5or the te&plate> we can select the &ostly using o$7ect

in this report te&plate" Howe,er> we can select the other o$7ect as well when Buery thiste&plate"

Huawei Technologies Proprietary ''


59/77


6" Select the o$7ect displaying attri$ute"



60/77


10" Set the $asic in5or&ation? Report na&e> report directory> and report description"

#5ter set the $asic in5or&ation> clic/ !e(tand then Finis& to end"



61/77


5.%.2 ':ce) $e,p)ate #anage,ent

This is one o5 the $est 5eatures o5 PRS" The purpose is to generate graphical report

auto&atically 5ro& PRS" e can output the networ/ daily3wee/ly3&onthly report with ;P(trend graph or other graphs ,ery easily"

This is $ase on the report te&plate"

generate the reBuired graph ine:cel> and then i&port the e:cel te&plate"

1" and sa,e to your PC"



62/77


2" Generate the reBuired graphs $ased on the downloaded data> a5ter opti&iAe the graphs and

5or&at> delete all the data and sa,e as a te&plate"



63/77




64/77


*" (&port the e:cel te&plate" Right clic/ the report te&plate that 7ust using> E(cel TemplateMana%ementSet E(cel Template> and then input the e:cel te&plate location> and set

e:port para&eters" The e:cel te&plate is i&ported"



65/77




66/77


+" #5ter i&port the e:cel te&plate> there is no di55erence o5 Buery results showing in PRS>$ut i5 you sa,e the results> you will 5ind that the graphs will $e generated auto&atically"

5.& 7uer0ing Report

(n the report &anage&ent> you can 5ind so&e report te&plates $y de5ault> and the user-de5inedreport te&plates"

y dou$le clic/ing the report te&plate> you can get the results directly"

ut i5 you want to ta/e so&e &ore daysD status> or &ore o$7ects status> you need to use Buery

$y condition" Here shows the steps"

1" Go to Report Manage&entE select the report te&plate that you want to Buery" Right clic/

the report te&plate> go to Query #y Condition"



67/77


2" Choose the O$7ects and ti&e you want to Buery"



68/77


*" Then you can get the reBuired data"



69/77


+" Sa,ing data" Right clic/ the &ain e:port page and sa,e"



70/77


5.5 ;( Ana)0sis

This section descri$es how to generate a ;P( analysis report" To Buery and o$tain the

speci5ied data 5ro& the report data$ase and to generate corresponding ;P( analysis reports>

you can set Buery conditions in real ti&e"

1" Go to Perormance Report'P) Analysis" Then you can get the 5ollowing window?



71/77


2" Select the right o$7ect type" The &ostly using o$7ect types are? GSC> GC8..GC8..

Group> GCell" Select the o$7ect type according to the counters you want to analysis"

Then> select the o$7ect"



72/77


*" Select the counters that you want to analysis"



73/77


+" Select the ti&e"



74/77


'" Clic/ the > then you can get the results" PRS also can show the graphs which

is si&ilar with M2000> $y clic/ing on "



75/77




76/77


6Routine Data Co))ection

we need to ta/e &ore original data" This chapter is a$out those original

data" There are so&e parts &ay$e need the help 5ro& the SS tea&"

6.1 C


77/77


6.& Origina) Stats

#M location? &$sc$a&,ersiona5tpMeasResult

The 5ile na&e 5or&at Fhourly?

#2010006"1'000'00-1000'008MS-9ORM#."&r5

6.5 /CSR = DB/ "ogs

The logs na&e contains the NGCSR and N%)G"

The location is? &$sc$a&co&&on5a&5a&log5&t

GSM OMCR Operations and Maintenance Guide.doc

Documents

Transcript of GSM OMCR Operations and Maintenance Guide.doc