Gravity Roller Conveyors, Live Storage Racking, Push-back ... · Live Storage Racking with Gravity...
Transcript of Gravity Roller Conveyors, Live Storage Racking, Push-back ... · Live Storage Racking with Gravity...
43
Push-back StorageModified variants of the “classic” Live Storageare possible with using the same components.Thus push-back conveyors can be made. Whenstoring the pallet in a push-back system the pal-let is pushed against the inclination with a forktruck and is removed from the conveying systemon the same (Lifo-System = Last in – First out).Only two end stops serving as safety elementsare necessary as the storing is carried out bymeans of a fork truck. The conveyor should beapproximately 100 mm longer than the theoret-ical calculated length, which is required to storethe pallets (numbers of pallet x length of thepallet + 100 mm)
By combining the mentioned basic types onecan develop a number of construction types justas required by the customer.
Pallet Cross Batten TransportWith all storage types and dependent on thedesign (roller distance, pallet form etc.) palletscan be conveyed in longways direction or incross batten direction with all storage versions.
EUROROLL-STORAGE SYSTEMS©
Gravity Roller Conveyors, Live StorageRacking, Push-back Storage
push-back storage
42
VARIANTS
EUROROLL-System Components can be suppliedfor most different kinds of racking types and sys-tems for every kind of application.
Live Storage Racking with Gravity RollerConveyorsEverywhere, where more than 4 pallets are con-veyed on one conveyor, EUROROLL-GravityConveyors are usable. With Gravity Roller Conveyors ending on theground, pallets can be removed from unloadingside or stored on the loading side by means of amanual hand truck, fork truck or electric fork truck.The conveyors are equipped with supports dow-eled to the ground. A simple and useful construc-tion, which is used in many areas.
Live Storage Racking, High-level RackingThe Live Storage Racking consists of Gravity RollerConveyors, which are fixed on a racking system.Several conveyors next to each other create eco-nomic use of space as well as an economic storingsystem resulting in better unloading aisles and intime and cost optimisation. The loading and un-loading sides are separated. Apart from the stor-age function the conveyors have also got a trans-port function. These conveyors are equipped withBrake Rollers, so that the pallet – also when theconveyor is empty – will move to the end at con-stant speed. In due course the customer will savemoney with the maintenance-free roller tracks.
gravity roller conveyors
live storage racking
44
Construction of the live storage systems withEUROROLL-Pallet Roller Conveyors
Existing pallet storage systems are changed overto pallet roller conveyors. The advantages are, thatthe order picking front and the loading front areseparated, so that costs are reduced in regard togangway and picking and at the same time acci-dents in the warehouse are prevented. With EU-ROROLL-Additional Elements it is very easy tochange over the existing storage systems. As re-quired the pallet can be stored either lengthwiseor crosswise.
The conveyors are mounted to the beams with in-finitely variable mounting clamps. The advantageis that the conveyors are mounted tension-free.Furthermore the beams are not weakened by bor-ings in the cross-section.
Screw clamp with screw: BKE
Dowel mounting set for ground mounting (with-out dowels). For approx. 2500 mm long palletconveyors with 2.7 % declination: DUBE
Dowel dia. 12 mm: DUB
MOUNTING
Detail A Detail B Detail C
A B C
MOUNTING MATEScrew Clamp Dowel Mounting Set Dowel with Screw dia. 12 mm
BKE DUBE DUB
45
EUROROLL-Pallet Roller Conveyors +Standard Pallet Packing = Low CostSolution for Flow Stores
The concept is simple:Standard width pallet racking frames can beused, because all working parts of the rollerconveyors are situated within the height of theconveyor profiles. Traverses should be fitted giv-ing a declination of 3.75 % to 4.25 %. By meansof the infinitely adjustable clamps (BKE) thetraverses are fitted to the frame. There is noneed to bore additional fixing holes. The instal-lation is therefore absolutely simple. The con-veyors lie on the beams without any tension.One or more conveyors can be installed next toeach other on one set of beams
The fixing of the conveyors is shown in detail B.Best type of beams are open profiles or doubleT-shaped profiles (see detail B). At loading andpicking faces (details A and C) angle typebeams are most suitable. This method protectsthe conveyors and has the additional advantageof extra space for loading and unloading thepallets. The fork drivers will be grateful for this.The EUROROLL conveyors can, of course, alsobe supplied as gravity conveyors with simplestands.
Beams distances:The beam distances for the supporting beamsare illustrated in the diagram at the side.Normally, beam distances over 1300 mm are tobe avoided, as too much flexing will interferewith the smooth running of the pallets whenheavily loaded.
PALLET ROLLER TRACKSPALLET ROLLER CONVEYORS
Load equal distributed on beam distances. Factors are valid for conveyors with 2 profiles.
Mounting and Fitting Possibilities
1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 beam distances L/m
U 40/80/40x3
LOAD FOR U-SHAPED PROFILE
load/kg
4000
3000
2000
1000
0
A B C
Detail A Detail B Detail C
S S
flow storage side view unloading side
46
KINDS OF MODULUS
moving directionunloading elements
loading elements
intermediate elements
Different kinds of rack types and systems for eachkind of application can easily be made with EURO-ROLL-System components. The length and thewidth of the conveyor can vary and can be freelychosen. Dependent on the application and theroom space one has to make sure, that the rightloading and unloading element is ordered.
There are loading elements for:Every kind of fork lift trucks independent if they areable to tilt the forks or to which altitude they areable to lift the forks like manual hand truck or elec-trical lift truck etc.
There are unloading elements for: Manual picking up the empty pallet or all other un-loading variation by any kind of fork lift truck
manual hand truck electric lift truck
47
EUROROLLPALLET CONVEYORS
Storing and Picking Variants,Possibilities of Application
suita
ble
for f
loor
mou
nted
grav
ity ro
ller c
onve
yors
suita
ble
for l
ive
stor
age
syst
ems
suita
ble
for p
ush-
back
stor
age
syst
ems
�llooaaddiinngg ssiiddee
uunnllooaaddiinngg ssiiddee
�
man
ual p
icki
ng
man
ual h
and
truck
elec
tric
lift t
ruck
fork
truc
k w
ithou
t tilt
ing
fork
s
fork
truc
k w
ith ti
lting
fork
s
high
-rack
ing
fork
truc
k w
ith-
out t
iltin
g fo
rks
high
-rack
ing
fork
truc
kw
ith ti
lting
fork
s
� � �
� � �
� � �
� � �
� � � � �
� � � � �
� �
� � �
� � �
� �
� �
� �
� � �
� � � � � �
� � � � � �
� � �
� � �
� � �
©