Gränsfors Breaching Tools 10.1

2010

Gränsfors Breaching & Rescue Tools

ver 10.1

Gränsfors Smide i Gnarp AB Phone +46 652 203 80 VAT SE556668732201 Östra Stationsvägen 45 Fax +46 652 203 33 [email protected] S-820 77 Gnarp, Sweden

GRÄNSFORS IN SWEDEN We are wholly committed to Total Quality. The working conditions in our facilities, our product quality, and an active concern for the environment are parts of that Total, as are ethical practices. Gränsfors, a family-owned company in Sweden, employs 40 people. In addition to breaching and rescue tools, Gränsfors forges the highest quality tools for forestry and industry. We have made Gränsfors Axes since 1902, TOVE Spring Steel Wrecking Bars since 1942, and forestry implements such as the STALPEN Tree Jack since 1977. Our sister company, Ullfrotté AB, manufactures Merino wool undergarments and socks in Östersund, Sweden. Their products are sold under the Woolpower brand name.

ver 10.1


Gränsfors Tactical Bar This lightweight bar is designed for breaking down reinforced doors. It is forged of a specially

alloyed spring steel and is fully tempered. It is extremely strong in relation to its low weight, and will withstand tremendous strain without yielding. The bar's head is built for striking, and claw's sides have profiled and shaped edges to prevent "back slip" when breaching. Patent pending. Length & Weight: 71.1 cm/28 in, 1.5 kg/3.3 lbs or 86.4 cm/34 in, 2.5 kg/5.5 lbs. Part # 202

Gränsfors Steel Door Breaching Tool A single head entry tool forged of premium steel and fully tempered, this tool is designed to

wedge open and breach heavily reinforced steel doors. The sides of the head have profiled and shaped edges to prevent "back slip" when breaching. Handles are ergonomic and there is a hand guard at the striking point. In the hands of a trained and experienced operator, this tool will normally open a security door in seconds. Patent pending. Length & weight: 71.1 cm/28 in, 4.0 kg/8.8 lbs or 86.4 cm/34 in, 4.2 kg/9.3 lbs. Part # 204 Gränsfors Wooden Door Breaching Tool A forged and tempered double edged entry tool designed for wedging and breaching outward-opening wooden doors. With its wide bite, this tool normally keeps a wooden door intact until it is fully forced open, avoiding the problem of the door's partially breaking and being held in place by the lock. Handles are ergonomic and there is a hand guard at the striking point. Patent pending. Length & weight: 71.1 cm/28 in, 4.0 kg/8.8 lbs or 86.4 cm/34 in, 4.2 kg/ 9.3 lbs. Part # 206

Gränsfors Tactical Ram Power in a small package, this small ram is an alternative to a sledge hammer when working with other breaching tools or for opening all kinds of doors. Its handy size and two handles afford precision pounding and it is easy to use in confined spaces. The Tactical Ram offers the power of a

ram and the speed of a sledge hammer in one tool. Weight: 9.5 kg/20.9 lbs. Total length: 24.1 cm/9.5 in. Total width: 19.0 cm/7.5 in. Total high: 15.0 cm/5.9 in. Diameter of strike face: 8.4 cm/3.3 in. Part # 208

Gränsfors Large Ram The Large Ram provides extra power when working on heavily reinforced doors, and can be used by one or two operators. A ring on the back allows for chain attachment. Weight: 18.6 kg/41 lbs. Total length: 65.5 cm/25.8 in. Total width: 23.1 cm/9.1 in. Total high: 16.7 cm/6.6 in. Diameter of strike face: 10.0 cm/3.9 in. Part # 209

GRÄNSFORS BREACHING TOOLS

ver 10.1


Bolt Cutter High quality black bolt cutter cuts chains, fences, padlocks, and steel bars. Handles are ergonomic and non-conductive. Made in Sweden.

Gränsfors Breaching Tool Carry Bag Black carry bag designed to hold Gränsfors tactical tools has seven separate pockets inside and one pocket with zipper outside. Includes a breaching manual for different types of doors. The bag can be carried conventionally or as a backpack. Made of durable Cordura 1000. Part # 214

Break & Rake Specifically engineered for window entries, the Break & Rake features a laser cut hook, serrated blade constructed of high quality steel. Use the hook to remove curtains, blinds and other obstructions, for a safer entry. Total length 140 cm/55 in or 70 cm/27.6 in, Weight 1.8 kg/4 lbs

Part # 219

Small & large Sledge Hammer High quality sledgehammers made in Sweden. Both have non-slip rubber grips on fiberglass handles. Small Sledge Hammer Large Sledge Hammer Weight 1.5 kg/3.3 lbs Weight 4.0 kg/8.8 lbs Total length 30.5 cm/12 in Total length 76 cm/30 in Head 10.4 x 4.6 cm/4.1 x 1.8 in Head 18 x 6.6/7,1 x 2,6 in Part # 218-1 Part # 218-2

GRÄNSFORS BREACHING TOOLS ACCESSORIES

Length & Weight: 45.7 cm/18 in; 1.9 kg/4.2 lbs 61 cm/24 in; 2.9 kg/6.4 lbs 91.4 cm/36 in; 6.0 kg/13.2 lbs Part # 212

ver 10.1


Edge Bender to unfold the cover plate on the gap between the door and door frame. Easy do use on niche mounted doors. Painted in black anti-reflection color. Plastic coating handle

for a good grip. Weight: 1485 g / 3.3 lbs Size: 31.5 x 7.5 x 3.7 cm / 12.4 x 2.9 x 1.5 in Part # 220


2.

ver 10.1


Gränsfors Tactical Bar This lightweight bar is designed for breaking down reinforced doors. It is forged of a specially alloyed spring steel and is fully tempered. It is extremely strong in relation to its low weight, and will withstand tremendous strain without yielding. The bar's head is built for striking, and claw's sides have profiled and shaped edges to prevent "back slip" when breaching. Patent pending. Length & Weight: 71.1 cm/28 in, 1.5 kg/3.3 lbs or 86.4 cm/34 in, 2.5 kg/5.5 lbs. Part # 202


ver 10.1


Gränsfors Steel Door Breaching Tool A single head entry tool forged of premium steel and fully tempered, this tool is designed to wedge open and breach heavily reinforced steel doors. The sides of the head have profiled and shaped edges to prevent "back slip" when breaching. Handles are ergonomic and there is a hand guard at the striking point. In the hands of a trained and experienced operator, this tool will normally open a security door in seconds. Length & weight: 71.1 cm/28 in, 4.0 kg/8.8 lbs or 86.4 cm/34 in, 4.2 kg/9.3 lbs. Part # 204


ver 10.1


Gränsfors Wooden Door Breaching Tool A forged and tempered double edged entry tool designed for wedging and breaching inward and outward-opening wooden doors. With its wide bite, this tool normally keeps a wooden door intact until it is fully forced open, avoiding the problem of the door's partially breaking and being held in place by the lock. Handles are ergonomic and there is a hand guard at the striking point. Length & weight: 71.1 cm/28 in, 3,2 kg/7.1 lbs or 86.4 cm/34 in, 3,6 kg/7.9 lbs. Part # 206


2.36” / 6 cm

5.91” / 15 cm

1,77” / 4,5 cm

ver 10.1


Gränsfors Tactical Ram Power in a small package, this small ram is an alternative to a sledge hammer when working with other breaching tools or for opening all kinds of doors. Its handy size and two handles afford precision pounding and it is easy to use in confined spaces. The Tactical Ram offers the power of a ram and the speed of a sledge hammer in one tool.

Weight: 9.5 kg/20.9 lbs. Total length: 24.13 cm/9.5 in. Total width: 19.05 cm/7.5 in. Total high: 15.0 cm/5.9 in. Diameter of strike face: 8.4 cm/3.3 in.

Part # 208

7.5

”

9.5”


3.3

”

ver 10.1


Gränsfors Large Ram The Large Ram provides extra power when working on heavily reinforced doors, and can be used by one or two operators. A ring on the back allows for chain attachment. Weight: 18.6 kg/41 lbs. Total length: 65.5 cm/25.8 in. Total width: 23.1 cm/9.1 in. Total high: 16.7 cm/6.6 in. Diameter of strike face: 10.0 cm/3.9 in. Part # 209

9.5

”

25.8”


3.9

”

ver 10.1


Bolt Cutter High quality black bolt cutter cuts chains, fences, padlocks, and steel bars. Handles are ergonomic and non-conductive. Made in Sweden. Part # 212

18” 24” 36”

a 0.55” 0.63” 0.83” b 1.10” 1.34” 1.61” c 0.24” 0.24” 0.83” length 18” 24” 36” weight 1.9 kg 2.9 kg 6.0 kg

(4.2 lbs) (6.4 lbs) (13.3 lbs)

a

b

c


ver 10.1


Gränsfors Breaching Tool Carry Bag

Black carry bag designed to hold Gränsfors tactical tools has seven separate pockets inside and one pocket with zipper outside. Includes a breaching manual for different types of doors. The bag can be carried conventionally or as a backpack. Made of durable Cordura 1000. Weight 2,7kg/5,95lbs Part # 214


Breaching Instructions

7 pockets inside

1 pocket outside with zipper

180cm / 70,8”

135c

m /

52,

3”

70cm

/ 2

7,7”

95cm / 37,4”

ver 10.1


Break & Rake

Specifically engineered for window entries. The Break & Rake features a laser cut hook, serrated blade constructed of high quality steel. Use the hook to remove curtains, blinds and other obstructions, for a safer entry. Total length 140 cm/55 in or 70 cm/27.6 in Weight 1.8 kg/4 lbs Part # 219-1 70 cm/27.6 in Part # 219-2 140 cm/55 in

Please note: The T-handle is bent 90o from what is shown on this picture!



ver 10.1


Sledge Hammers

Small Sledge Hammer High quality sledgehammers made in Sweden. Both have non-slip rubber grips on fiberglass handles. Weight: 1.5 kg/3.3 lbs Total length: 30.5 cm/12 in Head: 10.4 x 4.6 cm/4.1 x 1.8 in Part # 218-1 Large Sledge Hammer High quality sledgehammers made in Sweden. Both have non-slip rubber grips on fiberglass handles. Weight: 4.0 kg/8.8 lbs Total length: 76.2 cm/30 in

Head: 18 x 6.6 cm/7.1 x 2.6 in Part # 218-2


ver 10.1


Edge Bender to unfold the cover plate on the gap between the door and door frame. Easy do use on niche mounted doors. Painted in black anti-reflection color. Plastic coating handle for a good grip. Weight: 1485 g / 3.3 lbs Size: 31.5 x 7.5 x 3.7 cm / 12.4 x 2.9 x 1.5 in Part # 220


2.

31,5 cm

7,5 cm

ver 10.1


Gränsfors Multifunction High Jack

The high jack has been used to secure, support and stabilize in rescue situations in the forestry sector for 30 years. It uses simple tooth and pinion mechanical design and has proven itself in the field.

Manufactured by Gränsfors since 1977, this stable, reliable high jack is versatile and adaptable for rescue operations in numerous conditions.

Technical data Max lifting capacity 5726 lbs / 2.6 ton Max extension 25” / 0.63 m Length when transported ≈ 39” / 1 m

Different parts:

High Jack, 24 lbs / 11 kg Extending tube, 25” / 1 m, 9.5 lbs / 4.3 kg Adapter Crown, 1.6 lbs / 0.7 kg Adapter U-hook 2.3 lbs / 1.0 kg Movable base with ring

for strap attachment, 2.5 lbs / 1.2 kg Adapter L-hook, 4.1 lbs / 1.9 kg

Pictures not by scale!

RESCUE HIGH JACK

Gränsfors Breaching Tools 10.1

Documents

Transcript of Gränsfors Breaching Tools 10.1