GNZS703 Series 3 Panel Shale Shaker · GNZS703 Series 3 panel shale shaker can be used as a primary...
15
www.gnsolidscontrol.com 1 / 15 GNZS703 Series 3 Panel Shale Shaker
Transcript of GNZS703 Series 3 Panel Shale Shaker · GNZS703 Series 3 panel shale shaker can be used as a primary...
www.gnsolidscontrol.com
2 / 15
GNZS703 Series 3 panel shale shaker can be used as a primary shale shaker and drying shaker for desander and desilter cones.The linear motion design with Adjustable high G force make GNZS703 very popular for any types of drilling including: oil gas drilling, CBM drilling, HDD, water well, geothermal well drilling mud cleaning. The simple but heavy duty design makes GNZS703 shale shaker have reliable operation with less maintenance.
Technical Specs for GNZS703 Series Shale Shaker
Remarks: Wire Feeder is recommended for oil drilling rigs, Box Feeder is recommended for HDD and water well to keep shale shaker on tank without removing during moving as it is the shortest design within 2500mm, Low Weir feeder is recommended for work-over drilling rigs with lower rig substructure.
Model GNZS703E-HB GNZS703E-DZ GNZS703ED-HB Vibration Mode Linear Motion Recommend Capacity 120m3/h(528GPM) Vibration Motor 2×1.72Kw Screen Qty 3pcs Screen Size: L×W 700×1250mm Screen Area 2.63m2 Adjustable G Force ≤7.5G Vibration Amplitude 4.14~5.96mm Deck Angle Range -1°~+5° (Angle Adjustment While Working) Feeding Type Weir Feeder Box Feeder Low Weir Feeder Weir Height 895mm 1042mm 500mm EX Standard ExdIIBt4 / IEC EX/ ATEX Weight (Kg) 1675 1742 1675 Dimension: L×W×H(mm) 2717×1998×1428 2419×2055×1474 2717×1998×1428
www.gnsolidscontrol.com
3 / 15
Features & Benefits for GNZS703 Series Shale Shaker
0
1 Heavy duty design and heat treatment for complete shaker deck to give adjustable Linear Motion G force up to 7.5G to meet more application.
2 Anti-Corrosion Stainless Steel for the screen bed to give high strength and longer operation. 3 Patented mechanical drive shale shaker deck angle adjustment while working system. 4 Patented rubber sealing system to use pretention shaker screen without sealing rubber either steel frame or composite material frame. 5 Rubber covered dumping spring to give safety operation with less noise. 6 Flexible feeders for option allow to use in different application including: Weir Feeder, Box Feeder, and Low Weir Feeder. 7 Martin Vibration Motors or Italy OLI brand vibration Motors to have reliable service life and global service. 8 Electric components for control panel from Brand SIEMENS or Schneider. 9 Ball blasting and 3 layer epoxy anti-corrosion painting material of brand Kansai, Customized color is available.
www.gnsolidscontrol.com
4 / 15
GNZS703E-HB Weir Feeder Shale Shaker Dimension Drawing In (mm)
www.gnsolidscontrol.com
5 / 15
GNZS703E-DZ Box Feeder Shale Shaker Dimension Drawing (mm)
www.gnsolidscontrol.com
6 / 15
GNZJ703 Series Mud Cleaner
GNZJ703 Series Mud Cleaner is a combination of desander desilter and downstream shale shaker, it can be used to handle weighted mud and un-weighted mud with compact footprint. GN have 500 GPM , 1000 GPM, and 1500 GPM GNZJ 703 series mud cleaner for different capacity requirements. The desander desilter cones made from PU material which lasts longer with less maintenance. The removable hydro cyclone skid to allow operator easy to change the mud cleaner to shale shaker.
www.gnsolidscontrol.com
7 / 15
Model GNZJ703E-D1S8N GNZJ703E-2S12N GNZJ703E-3S16N Capacity 120m3/h(528GPM) 240m3/h(1056GPM) 360 m3/h(1584GPM) Desander Size 10inch 10 inch 10 Inch
Desander Qty 1pcs 2pcs 3 pcs
Desilter Size 4inch 4 inch 4 inch Desilter Qty 8pcs 12pcs 16 pcs Working Pressure 0.25 ~0.4 Mpa Feeding Size 6 Inch Output Size 8 Inch
Down Stream Shale Shaker Specifications Shaker Model GNZS703E Vibration Mode Linear Motion Vibration Motor 2x1.72Kw Screen Qty 3pcs Screen Size 700×1250mm Screen Area 2.63m2 Adjust G Force 7.5 G Vibration Amplitude 4.14~5.96mm Deck Angle Range -1°~+5° (Angle Adjustment While Working) EX Standard Exd IIB t4 / IEC Ex / ATEX Weight(Kg) 2071 2296 2393 Dimension(mm) 2419×2113×1848 2419×2113×2147 2419×2113×2147
www.gnsolidscontrol.com
9 / 15
GNZJ703E-D1S8N 500GPM Low Profile Mud Cleaner Dimension Drawing (mm)
www.gnsolidscontrol.com
10 / 15
GNZJ703E-2S12N 1000GPM Mud Cleaner Dimension Drawing (mm)
www.gnsolidscontrol.com
11 / 15
GNZJ703E-3S16N 1500GPM Mud Cleaner Dimension Drawing (mm)
www.gnsolidscontrol.com
12 / 15
GNZS703 Shale Shaker and GNZJ703 Mud Cleaner Applications
GNMS-500 GPM Mud System for CBM Drilling In Australia
One GNZS703 Shale Shaker with capacity up to 528GPM
One GNZJ703-1S8N Lower Profile Mud Cleaner to handle capacity up to 500GPM.
www.gnsolidscontrol.com
13 / 15
GNMS-1000 GPM WBM Drilling Solids Control & Waste Management System.
Two GNZS703 Shale Shaker with total capacity up to 1056 GPM
One GNZJ703-2S Desander Mud Cleaner for handling 1000GPM
One GNZJ703-12N Desilter Mud Cleaner for handling 1000GPM
Two GNLW363BG Decanter Centrifuge for fine solids separation.
One Linear Motion High G Drying Shaker GNZ594HGE-LD for water based mud drilling cuttings.
www.gnsolidscontrol.com
14 / 15
GNMS-1500HP Oil Drilling Rig Solids Control System
Three GNZS703 Shale Shaker to handle capacity 1584GPM
One GNZJ703-3S16N Mud Cleaner for handling 1500GPM
One GNZCQ360A Vacuum Degasser for gas separation.
One Middle Speed GNLW452 Decanter Centrifuge for barite recovery and High gravity solids separation.
One High Speed GNLW363BG Decanter Centrifuge for fine solids separation and low gravity solids separation.
One GNZYQ1000A Mud Gas Separation
www.gnsolidscontrol.com
15 / 15
China Contact:Hebei GN Solids Control Co.,Ltd
T:+86-316-5276988 / 5276989
F: +86-316-5276997 / 5276990
Add:No.3 Industry Road,Dachang Chaobai River Development Area,Langfang, China 065300
www.gnsolidscontrol.com
USA Contact: GN Solids America LLC
T:+1-713-878-0880 ( Call to Check equipment in Stock ,30,000 SF warehouse)
6710 Windfern Road, Houston, TX 77040, USA
www.gnsolidsamerica.com
