GET Parts caterpillar

PARTS SALES KIT UNDERCARRIAGE8TH EDITION

PARTS SALES KIT UN

DERCARRIAGE8TH EDITION

PECP3003-07www.cat.com

©2013 Caterpillar. All Rights Reserved. CAT, CATERPILLAR, BUILT FOR IT, their respective logos, “Caterpillar Yellow,” the “Power Edge”trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

CAT® DEALERS DEFINE WORLD-

CLASS PRODUCT SUPPORT.We offer you the right parts and service

solutions, when and where you need them.

The Cat Dealer network of highly trained experts

is built to keep your entire fleet up and running to

maximize your equipment investment.

SalesKitCover.indd 1 11/19/13 9:56 AM

© 2014 Caterpillar. All Rights Reserved. CAT, CATERPILLAR, BUILT FOR IT, their respective logos, “Caterpillar Yellow,” the “Power Edge”trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

1

Table of Contents

Section Page

IInnttrroodduuccttiioonn ................................................................................................................................................................................................................................................................................................................ 33EElleevvaatteedd SSpprroocckkeett TTrraaccttoorrss .................................................................................................................................................................................................................................................................... 55SSkkiiddddeerrss ....................................................................................................................................................................................................................................................................................................................220033LLooww SSpprroocckkeett TTrraaccttoorrss ............................................................................................................................................................................................................................................................................223377TTrraacckk--TTyyppee LLooaaddeerrss ....................................................................................................................................................................................................................................................................................339955CCllaassssiicc ........................................................................................................................................................................................................................................................................................................................552255EExxccaavvaattoorrss//FFrroonntt SShhoovveellss....................................................................................................................................................................................................................................................................553399TTiimmbbeerrkkiinngg ..............................................................................................................................................................................................................................................................................................................774433MMiinnii HHyyddrraauulliicc EExxccaavvaattoorrss..................................................................................................................................................................................................................................................................775599MMuullttii--TTeerrrraaiinn LLooaaddeerrss,, CCoommppaacctt TTrraacckk LLooaaddeerrss ......................................................................................................................................................................................................779911PPaavviinngg PPrroodduuccttss ..............................................................................................................................................................................................................................................................................................881177PPrroodduuccttiioonn IInnffoorrmmaattiioonn ..........................................................................................................................................................................................................................................................................884411CCoonnvveerrssiioonn GGuuiiddee ..........................................................................................................................................................................................................................................................................................886699PPaarrtt NNuummbbeerr IInnddeexx........................................................................................................................................................................................................................................................................................888811

3

IntroductionThis Cat® Undercarriage book is designed to provide dealer salesmen (field and in store) with part numbers andproduct information as well as features and benefits for selected parts and service commodities. It is a quick refer-ence tool which lists part numbers and applications for items that are: new, competitive and high in sales volumeand sales potential.

The Undercarriage book should not be used as a substitute for Parts Books, Numerical Parts Record, Parts PricingMedium or any other formal reference publication. All part numbers, specifications and application data publishedin the Undercarriage book are subject to change without notice. Any information taken from this publication for usein preparing a Parts Sales Order or Price Quotation should always be verified against the Numerical Parts Recordin accordance with the Management Parts gram entitled “The Numerical Parts Record.”

5

Elevated Sprocket TractorsD5N, D5M, D4H, 561N, 561M, 561H.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6D6N, D6M, D5H.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31D6T, D6R, D6H ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62D7R, D7H, 572R .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110D8T, D8R, D8N, 587T, 587R, 583T, 583R, 578... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138D8L ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158D9T, D9R, D9N ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164D9L, 589 .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172D10T, D10R, D10N... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178D10 ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188D11T, D11R, D11N... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191

6

D5N, D5M, D4H, 561N, 561M, 561HD5N, D5M, D4H SystemOne™ TRACK

PRESS FIT MASTER LINKD5N/M XL, D4H XL (41 SECTION): 8PJ664-UP 6GN1-UP, 5ES1-UP, 4BR1-UP, 4JS1-UP, AGG1-UP, CFH1-UP

D5N/M LGP, D4H LGP, (44 SECTION): 9GJ1116-UP, 4NK164-UP, 3CR1-UP, 6AS1-UP, 3DR1-UP, 5FS1-UP, 7LR1-UP, AKD1 UP, CKT1-UP6.75" (171.5 mm) PITCH - 16 mm BOLTPART NUMBER XL 41 Section LGP 44 Section

Link Assembly – (Quantity 2) 312-2273 312-2270Components of Link AssemblyLink Box Standard 312-2269 (1) 19 22Link Box Offset 312-2271 (2) 1 –

Standard Link 235-2514 38 42Standard Link (Press Fit) (3) 235-2514 2 2Track Hardware (3)

Bolt (M16) 218-3274 164 176Nut 5I-6125 164 176

D5N, D5M, D4H SystemOne TRACKCLAMP MASTER

D5N/M XL, D4H XL (41 SECTION): 8PJ664-UP 6GN1-UP, 5ES1-UP, 4BR1-UP, 4JS1-UP, AGG1-UP, CFH1-UPD5N/M LGP, D4H LGP, (44 SECTION): 9GJ1116-UP, 4NK164-UP, 3CR1-UP, 6AS1-UP, 3DR1-UP, 5FS1-UP, 7LR1-UP, AKD1 UP, CKT1-UP

6.75" (171.5 mm) PITCH - 16 mm STANDARD BOLT 18 mm MASTER BOLTPART NUMBER XL 41 Section LGP 44 Section

Link Assembly – (Quantity 2) 312-2273 312-2270Components of Link AssemblyLink Box Standard 312-2269 (1) 19 22Link Box Offset 312-2271 (2) 1 –

Standard Link 235-2514 38 42Clamp Master Link (3) 235-2620 2 2Track Hardware (3)

Bolt (M16) 218-3274 160 172Nut 5I-6125 160 172Track Master Bolt (M18) 254-0227 (4) 4 4

D5N, D5M, D4H, 561N, 561M, 561H, HEAVY DUTY SEALED AND LUBRICATED TRACK*D4H STD (39 SECTION): 2AC5597-UP, 8PB6091-UP

D5N/M XL, D4H XL (41 SECTION): 8PJ664-UP 6GN1-UP, 5ES1-UP, 4BR1-UP, 4JS1-UP, AGG1-UP, CFH1-UPD5N/M LGP, D4H LGP, 561N/M/H (44 SECTION): 9GJ1116-UP, 4NK164-UP, 3CR1-UP, 6AS1-UP,

3DR1-UP, 5FS1-UP, 7LR1-UP, 6NL383-UP, AKD1 UP, CKT1-UP, 1KW1-UP, 1CPH-UP6.75" (171.5 mm) PITCH - 5/8" BOLT

PARTNUMBER STD 39 Section XL 41 Section LGP 44 Section

Link Assembly – (Quantity 2) 108-0953 108-0955 108-0954Track Links

1 Link Box Standard that is greater than 40% worn should be replaced with part number 264-9765.2 Link Box Offset that is greater than 40% worn should be replaced with part number 264-9770.3 Not part of link assembly; required to assemble track group.4 It is recommended that track bolt 254-0227 at the clamp master joint be replaced at 1,500 hours to prevent possible bolt loosening and

/or bolt breakage.

7

D5N, D5M, D4H, 561N, 561M, 561HD5N, D5M, D4H, 561N, 561M, 561H, HEAVY DUTY SEALED AND LUBRICATED TRACK*D4H STD (39 SECTION): 2AC5597-UP, 8PB6091-UPD5N/M XL, D4H XL (41 SECTION): 8PJ664-UP 6GN1-UP, 5ES1-UP, 4BR1-UP, 4JS1-UP, AGG1-UP, CFH1-UPD5N/M LGP, D4H LGP, 561N/M/H (44 SECTION): 9GJ1116-UP, 4NK164-UP, 3CR1-UP, 6AS1-UP, 3DR1-UP, 5FS1-UP, 7LR1-UP, 6NL383-UP,AKD1 UP, CKT1-UP, 1KW1-UP, 1CPH-UP6.75" (171.5 mm) PITCH - 5/8" BOLT(Cont'd.)

PARTNUMBER STD 39 Section XL 41 Section LGP 44 Section

RH Pin End Master 108-0949 1 1 1LH Pin End Master 108-0950 1 1 1RH Bushing End Master 108-0951 1 1 1LH Bushing End Master 108-0952 1 1 1RH Regular 108-0947 38 40 43LH Regular 108-0948 38 40 43Other ComponentsPin 108-0943 39 41 44Bushing 108-0944 39 41 44Seal Assembly (Rigid) 250-3992 78 82 88Thrust Ring 152-8069 78 82 88Stopper 5G-2247 39 41 44Plug 6Y-0473 39 41 44Track Hardware (5)

Bolt 9G-3110 152 160 172Bolt (Self-Cleaning Shoe) 9G-3110 86Bolt (Self-Cleaning Shoe) 3T-3884 86Nut 1M-1408 152 160 172Master Bolt 9G-8592 2 2 2Master Bolt 3T-8601 2 2 2Master Bolt (Self- Cleaning Shoe) 9G-8592 2Master Bolt (Self-Cleaning Shoe) 3T-3889 2Special Sets/GroupsSeal Set (88 Seal Assemblies) 252-7856 1 1 1Bushing and Seal Group (39 Sections) 115-2438 1 1 1

*When installing Heavy Duty Track on existing machines refer to IRM UC94-18 for installation and guarding information. Also refer to Special InstructionSEHS9805 for additional guarding information.

D5N XL, D5M XL MADE TO ORDER (MTO) TRACK GROUPSTRACK GROUPS NOT STOCKED IN DISTRIBUTION FACILITIES

QUANTITY PART NUMBERLink Assembly Used 108-0955Moderate Service Shoe – 22" (560 mm) 2 108-2622

5 Not part of link assembly; required to assemble track group.

8

D5N, D5M, D4H, 561N, 561M, 561HD5N LGP, D5M LGP MADE TO ORDER (MTO) TRACK GROUPS

TRACK GROUPS NOT STOCKED IN DISTRIBUTION FACILITIESQUANTITY PART NUMBER

Link Assembly Used 108-0954Moderate Service Shoe – 30" (760 mm) 2 108-2625

D5N XL/LGP, D5M XL/LGP, D4H STD/XL/LGP ROTATING BUSHING TRACK*STD: 2AC5597-UP, 8P6091-UP

XL: 8PJ664-UP, 6N1-UP, 5ES1-UP, 4BR1-UP, 4JS1-UP, AGG1-UP, CFH1-UP LGP: 9GJ1116-UP,4NK164-UP, 3CR1-UP, 6AS1-UP, 3DR1-UP, 5FS1-UP, 7LR1-UP, AKD1-UP, CKT1-UP

6.75" (171.5 mm) PITCH - 5/8" BOLTPART

NUMBER STD 39 Section XL 41 Section LGP 44 SectionLink Assembly (Quantity 2) 152-8040 (6) 152-8039 (7) 152-8038 (8)

Track LinksRH Pin End Master 108-0949 1 1 1LH Pin End Master 108-0950 1 1 1RH Bushing End Master (9) 165-1748 1 1 1LH Bushing End Master (9) 165-1749 1 1 1RH Regular (9) 165-1746 38 40 43LH Regular (9) 165-1747 38 40 43Other ComponentsPin 152-8075 39 41 44Bushing 165-1767 39 41 44Seal Assembly (Rigid) 250-3992 156 164 176Thrust Ring 152-8069 156 164 176Stopper 5G-2247 39 41 44Plug 6Y-0473 39 41 44Track Hardware (10)

Bolt 9G-3110 152 160 172Nut 1M-1408 152 160 172Master Bolt 9G-8592 2 2 2Master Bolt 3T-8601 2 2 2* Rotating Bushing Track is an application specific undercarriage designed for high abrasion/low impact applications (4,000 hour system or less). When installingRotating Bushing Track on existing machines, refer to IRM UC95-11 for installation and guarding information. Also refer to Special Instruction SEHS9805 for addi-tional guarding information. For servicing information refer to Special Instruction SEHS9542. This product is not for use on Track Skidders and 561H Pipelayers.

6 Serviced replaced by 108-0953 (Heavy Duty) Refer to IRM PELJ1141 for conversion options.7 Serviced replaced by 108-0955 (Heavy Duty) Refer to IRM PELJ1141 for conversion options.8 Serviced replaced by 108-0954 (Heavy Duty) Refer to IRM PELJ1141 for conversion options.9 Joint assemblies (includes link and insert). Insert not serviced.10 Not part of link assembly; required to assemble track group.

9

D5N, D5M, D4H, 561N, 561M, 561HD4H STD/XL/LGP, 561H SEALED AND LUBRICATED

LARGE STEPPED BUSHING, RIGID SEAL ASSEMBLYD4H STD (39 SECTION): 2AC1-5596, 8PB1-6090

D4H XL (41 SECTION): 8PJ1-663D4H LGP, 561H (44 SECTION): 3AC1-UP, 4NK1-163, 6NL1-382, 9DB1-UP, 9GJ1-1115

6.75" (171.5 mm) PITCH – 5/8" BOLTPART

NUMBER STD 39 Section XL 41 Section LGP 44 SectionLink Assembly – (Quantity 2) 227-9976 228-2743 228-2744Track LinksRH Pin End Master 6Y-9263 1 1 1LH Pin End Master 6Y-9264 1 1 1RH Bushing End Master 9G-8585 1 1 1LH Bushing End Master 9G-8586 1 1 1RH Regular 6Y-9261 38 40 43LH Regular 6Y-9262 38 40 43Other ComponentsPin 160-7816 39 41 44Bushing 224-3959 39 41 44Seal Assembly 250-4000 78 82 88Thrust Ring 6Y-6486 78 82 88Stopper 5G-2247 39 41 44Plug 6Y-0473 39 41 44Track Hardware (11)

Bolt (Grouser shoe) 9G-3110 152 160 172Bolt (Self- Cleaning Shoe) 9G-3110 – – 86Bolt (Self-Cleaning Shoe) 3T-3884 – – 86Nut 1M-1408 152 160 172Master Bolt (Grouser Shoe) 9G-8592 2 2 2Master Bolt (Grouser Shoe) 3T-8601 2 2 2Master Bolt (Self-Cleaning Shoe) 9G-8592 – – 2Master Bolt (Self-Cleaning Shoe) 3T-3889 – – 2Special Sets/GroupsSeal Set (88 Seal Assemblies) 252-7860 1 1 1Bushing and Seal Group (39 Sections) 227-9954 1 1 1


10

D5N, D5M, D4H, 561N, 561M, 561HD4H STD/XL/LGP, 561H SEALED AND LUBRICATED

RIGID SEAL ASSEMBLYD4H STD (39 SECTION): 2AC1-5596, 8PB1-6090



NUMBER STD 39 Section XL 41 Section LGP 44 SectionLink Assembly – (Quantity 2) – (12) – (13) – (14)

Track LinksRH Pin End Master 6Y-9263 1 1 1LH Pin End Master 6Y-9264 1 1 1RH Bushing End Master 9G-8585 1 1 1LH Bushing End Master 9G-8586 1 1 1RH Regular 6Y-9261 38 40 43LH Regular 6Y-9262 38 40 43Other ComponentsPin 160-7816 39 41 44Bushing 9G-8588 39 41 44Seal Assembly 250-4000 78 82 88Thrust Ring 6Y-6486 78 82 88Stopper 5G-2247 39 41 44Plug 6Y-0473 39 41 44Track Hardware (15)

Bolt (Grouser shoe) 9G-3110 152 160 172Bolt (Self-Cleaning Shoe) 9G-3110 – – 86Bolt (Self-Cleaning Shoe) 3T-3884 – – 86Nut 1M-1408 152 160 172Master Bolt (Grouser Shoe) 9G-8592 2 2 2Master Bolt (Grouser Shoe) 3T-8601 2 2 2Master Bolt (Self-Cleaning Shoe) 9G-8592 – – 2Master Bolt (Self-Cleaning Shoe) 3T-3889 – – 2Special Sets/GroupsSeal Set (88 Seal Assemblies) 252-7860 1 1 1Bushing and Seal Group (39 Sections) – (16) 1 1 1

12 Service replaced by (1) 227-9976 link assembly and (5) 108-0946 sprocket segments.13 Canceled and replaced by (1) 228-2743 link assembly and (5) 108-0946 sprocket segments.14 Service replaced by (1) 228-2744 link assembly and (5) 108-0946 sprocket segments.15 Not part of link assembly; required to assemble track group.16 Order (1) 227-9954 Seal and Bushing Group and (5) 108-0946 sprocket segments.

11

D5N, D5M, D4H, 561N, 561M, 561HD4H STD/XL/LGP, 561H SEALED AND LUBRICATED TRACK

CRESCENT SEAL ASSEMBLYD4H STD (39 SECTION): 2AC1-5596, 8PB1-6090


6.75" (171.5 mm) PITCH – 5/8" BOLTQUANTITY PART NUMBER

Link Assembly – 39 Section 2 – (17)

Track LinksRH Pin End Master 1 9G-8583LH Pin End Master 1 9G-8584RH Bushing End Master 1 9G-8585LH Bushing End Master 1 9G-8586RH Regular 38 9G-8581LH Regular 38 9G-8582Other ComponentsPin 39 154-3664Bushing 39 9G-8588Seal Assembly 78 3T-5634 (18)

Thrust Ring 78 9G-8591Stopper 39 5G-2247Plug 39 6Y-0473Track Hardware (19)

Bolt (Grouser Shoes) 152 9G-3110Nut 152 1M-1408Master Bolt (Grouser Shoes) 2 9G-8592Master Bolt (Grouser Shoes) 2 3T-8601Bolt (Self-Cleaning Shoe) (LGP, 44 Section) 86 9G-3110Bolt (Self-Cleaning Shoe) (LGP, 44 Section) 86 3T-3884Master Bolt (Self-Cleaning Shoe) (LGP, 44 Section) 2 9G-8592Master Bolt (Self-Cleaning Shoe) (LGP, 44 Section) 2 3T-3889Special Sets/GroupsBushing and Seal Group (39 Sections) 1 6Y-3879

D5N LGP,D5M LGP, D4H LGP HEAVY DUTY TRI/QUAD TRACK*3CR1-UP, 3DR1-UP, 4NK164-UP, 5FS1-UP, 6AS1-UP, 7LR1-UP, 9GJ1116-UP, AKD1-UP

6.75" (171.5 mm) PITCH – 5/8" BOLT

QUAD TRACKQUANTITY

TRI TRACKQUANTITY

PARTNUMBER

Link Assembly – 44 Section 2 2 108-0954 (20)

Track Links

17 If 39, 41, 44, section link assemblies are required upgrade to sealed and lubricated track, with rigid seals.18 Serviced Replaced By: 260-8739.19 Not part of link assembly; required to assemble track group.20 Refer to Heavy Duty Track section for component information.

12

D5N, D5M, D4H, 561N, 561M, 561HD5N LGP,D5M LGP, D4H LGP HEAVY DUTY TRI/QUAD TRACK*3CR1-UP, 3DR1-UP, 4NK164-UP, 5FS1-UP, 6AS1-UP, 7LR1-UP, 9GJ1116-UP, AKD1-UP6.75" (171.5 mm) PITCH – 5/8" BOLT(Cont'd.)

QUAD TRACKQUANTITY

TRI TRACKQUANTITY

PARTNUMBER

RH Regular 44 44 (21) 108-0947LH Regular 44 44 (22) 108-0948Other ComponentsStub Pin 88 44 108-2639Stub Bushing 88 44 108-2640Track Hardware (Per side: Quad – 1 center chain & 2 outriggers; Tri – 1 center chain & 1 outrigger) (23)

Bolt 344 258 9G-3110Nut 344 258 1M-1408Master Bolt 4 3 9G-8592Master Bolt 4 3 3T-8601* When installing Heavy Duty Track on existing machines refer to IRM UC94-18 for installation and guarding information. Also refer to Special InstructionSEHS9805 for additional guarding information. For more information about Quad or Tri Link track, refer to IRM 91-18 and special instruction SEHS8881.

D5N, D5M, D4H SystemOne TRACK SHOES6.75" (171.5 mm) PITCH – 16 mm BOLT

TYPE WIDTH PART NUMBERMASTER SHOEPART NUMBER

Moderate Service 18.0" (460 mm) 260-6769 255-1536Moderate Service 20.0" (510 mm) 260-6768 257-2336Moderate Service 22.0" (560 mm) 260-6767 255-1533Moderate Service 24.0" (610 mm) 260-6766 255-1532Moderate Service 30.0" (760 mm) 260-6765 255-1530Extreme Service 18.0" (460 mm) 260-6773 255-1537Extreme Service 20.0" (510 mm) 260-6772 256-4944Extreme Service 22.0" (560 mm) 260-6771 255-1534Extreme Service 30.0" (760 mm) 269-1133 313-4548Extreme Service (Center Hole) 30.0" (760 mm) 300-0417 300-0418 (24)

D5N, D5M, D4H, 561N, 561M, 561H, TRACK SHOESSEALED AND LUBRICATED TRACK, HEAVY DUTY TRACK, ROTATING BUSHING TRACK

6.75" (171.5 mm) PITCH – 5/8" BOLT

TYPE WIDTHREGULAR SHOEPART NUMBER STD XL LGP 561H

Extreme Service 18.0" (460 mm) 6Y-5624 Y Y Y YExtreme Service 20.0" (510 mm) 8E-9816 N Y Y YExtreme Service 22.0" (560 mm) 8E-9814 N Y Y N

21 Required for right hand outrigger chain.22 Required for left hand outrigger chain.23 Not part of link assembly; required to assemble track group.24 Track shoe is made as ordered (MAO) (not stocked in parts distribution centers) and typically has a 6-12 week lead-time.

13

D5N, D5M, D4H, 561N, 561M, 561HD5N, D5M, D4H, 561N, 561M, 561H, TRACK SHOESSEALED AND LUBRICATED TRACK, HEAVY DUTY TRACK, ROTATING BUSHING TRACK6.75" (171.5 mm) PITCH – 5/8" BOLT(Cont'd.)

TYPE WIDTHREGULAR SHOEPART NUMBER STD XL LGP 561H

Extreme Service 24.0" (610 mm) 1Q-4754 N Y Y NExtreme Service 30.0" (760 mm) 236-1870 N N Y NModerate Service 14.0" (355 mm) 3T-0356 Y N N NModerate Service 16.0" (405 mm) 3T-0358 Y N N NModerate Service 18.0" (460 mm) 3T-0360 Y Y N YModerate Service (Center Punched) 18.0" (460 mm) 9W-3955 Y Y N NModerate Service 20.0" (510 mm) 8E-9812 N Y Y YModerate Service 22.0" (560 mm) 8E-9810 N Y Y NModerate Service 24.0" (610 mm) 8E-4972 N N Y NModerate Service 26.0" (660 mm) 6I-9573 N N Y NModerate Service 30.0" (760 mm) 216-6286 N N Y NSelf-Cleaning 30.0" (760 mm) 6T-0232 N N Y NQuad (MS) 23.0" (585 mm) 9W-7984 N N Y NQuad (MS) 30.0" (760 mm) 9W-8326 N N Y NTri Offset RH (ES) 18.0" (460 mm) 8E-8526 N N N NTri Offset LH (ES) 18.0" (460 mm) 8E-8527 N N N N

D5N, D5M, D4H, 561N, 561M, 561H SPROCKETSHEAVY DUTY, SystemOne, ROTATING BUSHING, AND SEALED AND LUBRICATED TRACK

(PER SIDE) QUANTITY PART NUMBERSprocket Segment (5 Tooth) 5 108-0946Bolt 20 3S-8182Nut 20 7H-3607Washer 20 6V-4316

D5N XL, D5M XL, D4H XL, D4H IDLERSCURRENT DESIGN (SYMMETRIC SEALS)

INCREASED TREAD WEAR LIFE

(PER MACHINE) QUANTITYFRONT IDLER LARGEDIA. PART NUMBER

REAR IDLER SMALLDIA. PART NUMBER

Idler Group 2 190-1551 190-1534Components of GroupIdler Assembly 1 190-2495 190-1536- Bearing (25) 2 8P-7002 8P-7002Shaft 1 160-9757 160-9757Collar 2 160-9756 160-9756Retainer 2 160-9761 160-9761

25 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

14

D5N, D5M, D4H, 561N, 561M, 561HD5N XL, D5M XL, D4H XL, D4H IDLERSCURRENT DESIGN (SYMMETRIC SEALS)INCREASED TREAD WEAR LIFE(Cont'd.)



Thrust Washer 2 137-9518 137-9518Bolt 12 053-2294 053-2294Washer 12 5M-2894 5M-2894Seal – Duo-ConeTM Group 2 161-7247 161-7247- Toric Ring (26) 2 161-7249 161-7249Seal – Collar 1 5K-0216 5K-0216Seal – Retainer 2 2H-4145 2H-4145Stopper 1 3T-9536 3T-9536Plug 1 6Y-0473 6Y-0473Mounting Hardware (D5N XL, D5M XL) (27)

End Cap 2 108-1138 108-1138Block 2 108-1136 108-1136Bolt (16 mm) 4 8T-0282 8T-0282Washer 4 5P-8247 5P-8247Shim (Front Idlers Only) 4 3W-4346 3W-4346Mounting Hardware (D4H, D4H XL) (27)

End Cap 2 9N-4683 9N-4683Block 2 9N-4680 9N-4680Bolt (5/8") 4 1A-8651 1A-8651Washer 4 5P-8247 5P-8247Shim (Front Idlers Only) 4 3W-4346 3W-4346

D5N LGP, D5M LGP, D4H LGP, 561N, 561M, 561H IDLERSCURRENT DESIGN (SYMMETRIC SEALS), LARGE TREAD DIAMETER

INCREASED TREAD WEAR LIFE(PER MACHINE) QUANTITY PART NUMBERIdler Group 4 190-1551Components of GroupIdler Assembly 1 190-2495- Bearing (26) 2 8P-7002Shaft 1 160-9757Collar 2 160-9756Retainer 2 160-9761Thrust Washer 2 137-9518Bolt 12 053-2294Washer 12 5M-2894Seal – Duo-Cone Group (Symmetric) 2 161-7247

26 Component of preceding assembly or group; quantity shown is quantity per assembly or group.27 These components are not included in the idler group; quantities shown are required to mount each idler.

15

D5N, D5M, D4H, 561N, 561M, 561HD5N LGP, D5M LGP, D4H LGP, 561N, 561M, 561H IDLERSCURRENT DESIGN (SYMMETRIC SEALS), LARGE TREAD DIAMETERINCREASED TREAD WEAR LIFE(Cont'd.)(PER MACHINE) QUANTITY PART NUMBER- Toric Ring (28) 2 161-7249Seal – Collar 2 5K-0216Seal – Retainer 2 2H-4145Stopper 1 3T-9536Plug 1 6Y-0473Mounting Hardware (D5N LGP, D5M LGP) (29)

End Cap 2 108-1138Block 2 108-1136Bolt (16 mm) 4 8T-0282Washer 4 5P-8247Shim (Front Idlers Only) 4 3W-4346Mounting Hardware (D4H LGP, 561H) (29)

End Cap 2 9N-4683Block 2 9N-4680Bolt (5/8") 4 1A-8651Washer 4 5P-8247Shim (Front Idlers Only) 4 3W-4346

D5N, D5M, D4H SystemOne CENTER TREAD IDLERSXL,LGP

(PER MACHINE) QUANTITY PART NUMBERIdler Group 4 290-0749Components of GroupIdler Assembly 1 228-3711 (30)

- Bearing (28) 2 8P-7002Shaft 1 160-9757Collar 2 160-9756Retainer 2 160-9761Thrust Washer 2 137-9518Bolt 12 053-2294Washer 12 5M-2894Seal – Duo-Cone Group (Symmetric Seal) 2 161-7247- Toric Ring (28) 2 161-7249Seal – Retainer 2 2H-4145Seal – Collar 2 5K-0216

28 Component of preceding assembly or group; quantity shown is quantity per assembly or group.29 These components are not included in the idler group; quantities shown are required to mount each idler.30 Service Replaced by 290-0750.

16

D5N, D5M, D4H, 561N, 561M, 561HD5N, D5M, D4H SystemOne CENTER TREAD IDLERSXL,LGP(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERStopper 1 3T-9536Plug 1 6Y-0473

D5N, D5M, XL/LGP SystemOne CENTER TREAD IDLER SCRAPERBOLT ON SCRAPER BASE PLATES

(PER MACHINE) QUANTITY PART NUMBERBase Plate 4 251-8596Base Plate 4 251-8597Scraper 8 251-8595Bolt (12 mm) 8 8T-4910Bolt (12 mm) 24 8T-4183Washer 32 7D-1649

D5N, D5M, D4H XL/LGP SystemOne CENTER TREAD IDLER SCRAPERWELD ON SCRAPER BASE PLATES

(PER MACHINE) QUANTITY PART NUMBERHardware Idler Arrangement (Includes hardware for 4 Idler groups) 1 296-0068 (31)

Components of Idler Hardware ArrangementPlate- Scraper Base (Front) (Weld on) 2 248-5304Plate- Scraper Base (Rear) (Weld on) 2 248-5325Side Scraper 8 254-3802Tread Scraper (Front Only) 2 254-3801Scraper Bolt (12 mm) 28 8T-4139Scraper Washer 28 5P-1076Plate (Weld to track roller frame front & rear) 8 271-6117Scraper (Bolt to plates welded to track roller frame) (Lower guards) 8 271-6118Bolt (12 mm) 24 198-4778Washer 24 8T-4183Shim (For XL, LGP Front Idlers) 4 254-4433Shim (For Only LGP Rear Idlers ) 4 254-4432Block 8 248-5326Bolt (16 mm) (For D5N/M machines) 16 6V-7675Bolt (5/8 Inch) (For D4H machines) 16 1D-4593Washer 16 5P-8247End Cap (32) 8 108-1138

31 This arrangement contains only metric bolts to bolt the blocks and end caps to the track roller frame for D5N/M machines. For D4H ma-chines must order inch bolts separately (1D-4593) to bolt the blocks and end caps to the track roller frame.

32 This part is not included within the hardware arrangment. Needs to be ordered separately or reused from current design.

17

D5N, D5M, D4H, 561N, 561M, 561HD5M XL, D4H XL, D4H IDLERS

FORMER DESIGN



Idler Group 2 – –

Components of GroupIdler Assembly 1 190-2495 190-1536- Bearing (33) 2 8P-7002 8P-7002Shaft 1 6T-2620 6T-2620Retainer 2 6T-2619 6T-2619Thrust Washer 1 137-9518 137-9518Bolt 12 053-2294 (34) 053-2294 (35)

Washer 12 5M-2894 5M-2894Stabilizer Ring 2 7T-4030 7T-4030Seal – Duo-Cone Group 2 7T-4080 7T-4080- Toric Ring (33) 1 8P-7003 8P-7003- O-Ring (33) 1 6V-2699 6V-2699Seal – Retainer 2 2H-4145 2H-4145Stopper 1 3T-9536 3T-9536Plug 1 6Y-0473 6Y-0473Mounting Hardware (D5M XL) (36)

End Cap 2 108-1138 108-1138Block 2 108-1136 108-1136Bolt (16 mm) 4 8T-0282 8T-0282Washer 4 5P-8247 5P-8247Shim (Front Idlers Only) 4 3W-4346 3W-4346Mounting Hardware (D4H, D4H XL) (36)

End Cap 2 9N-4683 9N-4683Block 2 9N-4680 9N-4680Bolt (5/8") 4 1A-8651 1A-8651Washer 4 5P-8247 5P-8247Shim (Front Idlers Only) 4 3W-4346 3W-4346Special Application SealsSeal – Duo-Cone Group 2 7T-4086 7T-4086- Toric Ring (33) 1 7T-4087 7T-4087- O-Ring (33) 1 6V-2699 6V-2699

33 Component of preceding assembly or group; quantity shown is quantity per assembly or group.34 Use 0S-1594 bolt with former idler assembly 6T-261535 Use 0S-1594 bolt with former idler assembly 7T-4399.36 These components are not included in the idler group; quantities shown are required to mount each idler.

18

D5N, D5M, D4H, 561N, 561M, 561HD5M LGP, D5M XL, D4H, D4H LGP, D4H XL, 561H IDLERS

FORMER DESIGN, LARGE TREAD DIAMETER

(PER MACHINE) QUANTITY PART NUMBERIdler Group 4 –

Components of GroupIdler Assembly 1 190-2495- Bearing (37) 2 8P-7002Shaft 1 6T-2620Retainer 2 6T-2619Thrust Washer 2 137-9518Bolt 12 053-2294 (38)

Washer 12 5M-2894Stabilizer Ring 2 7T-4030Seal – Duo-Cone Group 2 7T-4080- Toric Ring (37) 1 8P-7003- O-Ring (37) 1 6V-2699Seal – Retainer 2 2H-4145Stopper 1 3T-9536Plug 1 6Y-0473Mounting Hardware (D5M LGP, D5M XL) (39)

End Cap 2 108-1138Block 2 108-1136Bolt (16 mm) 4 8T-0282Washer 4 5P-8247Shim (Front Idlers Only) 4 3W-4346Mounting Hardware (D4H, D4H LGP, D4H XL, 561H) (39)

End Cap 2 9N-4683Block 2 9N-4680Bolt (5/8") 4 1A-8651Washer 4 5P-8247Shim (Front Idlers Only) 4 3W-4346Special Application SealsSeal – Duo-Cone Group 2 7T-4086- Toric Ring (37) 1 7T-4087- O-Ring (37) 1 6V-2699

D5N, D5M, D4H SystemOne CARRIER ROLLERS(PER MACHINE) QUANTITY PART NUMBERCarrier Roller Group 2 227-5971 (40)

37 Component of preceding assembly or group; quantity shown is quantity per assembly or group.38 Use 0S-1594 bolt with former idler assembly 6T-2615.39 These components are not included in the idler group; quantities shown are required to mount each idler.40 Serviced Replaced by 362-0515.

19

D5N, D5M, D4H, 561N, 561M, 561HD5N, D5M, D4H, 561N, 561M, 561H CARRIER ROLLERS

(PER MACHINE) QUANTITY PART NUMBERGroup 2 6K-9880Components of GroupRoller Shell 1 9W-6174Shaft 1 6K-9861Plate 1 6K-9860Bolt 2 6V-4791Cup 2 1M-8736Cone 2 1M-8735Ring 1 1M-7914Cover 1 3K-6638Collar Assembly 1 1M-7918Plug 1 2P-0347Bolt 3 0L-1351Seal – Duo-Cone Group 1 9W-5224- Toric Ring (41) 2 1M-3097Seal – Cover 1 5H-8848Seal – Plug 1 1S-8947Seal – Shaft O-Ring 1 1H-9696Special Application SealsSeal – Duo-Cone Group 1 5K-6191- Toric Ring (41) 2 2S-2181

D5N, D5M SystemOne TRACK ROLLERS(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) Roller Group - (42) 357-5368Mounting Hardware (43)

Cap (44) 2 218-4993Bolt (16 mm) 4 8T-0281Washer 4 9X-8268

D4H SystemOne TRACK ROLLERS(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) Roller Group 14 357-5368Mounting Hardware (43)

Cap 2 218-4993

41 Component of preceding group; quantity shown is the quantity per group.42 14 required for XL machines; 16 required for LGP machines.43 These components are not included in the roller group; quantities shown are required to mount each roller.44 Use special offset caps 262-7193 and 262-7194 at roller positions 2 and 7 on LGP machines (3CR1232 and Up, 3DR0464 and Up, 6AS0463

and Up, 5FS0260 and Up, AKD0001 to AKD01361) with 8 roller frame configuration. These special offset caps repositions roller groups 2and 7 to provide the necessary clearance with roller groups 1 and 8.

20

D5N, D5M, D4H, 561N, 561M, 561HD4H SystemOne TRACK ROLLERS (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERBolt (5/8 Inch) 4 1B-4367Washer 4 5P-8247

D5N, D5M, D4H, 561H TRACK ROLLERSCURRENT DESIGN, USE WITH 7 ROLLER FRAME CONFIGURATION

(PER MACHINE) QUANTITY PART NUMBERDouble Flange (DF) Roller Group 6 347-0406

Single Flange (SF) Roller Group 8 346-8807

Double Flange (DF, Tall Flange) Roller Group – (45) 347-4170

Mounting Hardware (D5M, D5N) (46)

Cap 2 248-5323Bolt (16 mm) 4 8T-0357Washer 4 5P-8247Mounting Hardware (D4H, 561H) (46)

Cap 2 248-5323Bolt (5/8") 4 1A-8537Washer 4 5P-8247

D5N LGP, D5M LGP, 561N, 561M TRACK ROLLERSCURRENT DESIGN, USE WITH 8 ROLLER FRAME CONFIGURATION

3CR1232-UP, 3DR464-UP



Double Flange (DF, Tall Flange) Roller Group – (45) 347-4170Mounting Hardware (46)

Cap 2 248-5323Bolt (16 mm) 4 8T-0357Washer 4 5P-8247

D4H, 561H TRACK ROLLERSFORMER DESIGN (BOLT-ON RETAINER), INCH MOUNTING HARDWARE

(PER MACHINE) QUANTITY FORMER PART NUMBERDouble Flange (DF) Roller Group 6 –

Single Flange (SF) Roller Group 8 –

Components of GroupRoller Shell (DF) 1 7G-4832Roller Shell (SF) 1 7G-4833

45 Optional DF roller for guiding; use quantity required for specific roller frame type.46 These components are not included in the roller group; quantities shown are required to mount each roller.

21

D5N, D5M, D4H, 561N, 561M, 561HD4H, 561H TRACK ROLLERSFORMER DESIGN (BOLT-ON RETAINER), INCH MOUNTING HARDWARE(Cont'd.)(PER MACHINE) QUANTITY FORMER PART NUMBER- Bearing (47) 2 8P-7002Shaft 1 8E-6573Retainer Assembly 2 3T-9538 (48)

Thrust Washer (49) 1 9G-9351Dowel (49) 4 1L-5072Bolt 12 0S-1594Washer 12 5M-2894Stabilizer Ring 2 7T-4030Seal – Duo-Cone Group (Inverted) 2 7T-4080- Toric Ring (47) 1 8P-7003- O-Ring (47) 1 6V-2699Seal – Retainer O-Ring 2 1H-6227Stopper 1 7G-4332Plug 1 6Y-0473Mounting Hardware (50)

End Cap 2 7G-4829Bolt (5/8") 4 1B-4367Washer 4 5P-8247Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 7T-4086- Toric Ring (47) 1 7T-4087- O-Ring (47) 1 6V-2699

D5N, D5M, XL/LGP SystemOne END GUIDING GUARDSMETRIC HARDWARE

(PER MACHINE) QUANTITY PART NUMBERFrontGuard Assembly (RH) 2 196-7111Guard Assembly (LH) 2 196-7112Wear Strip 4 271-6079Bolt (12 mm) 12 8T-4956Washer 12 8T-4223RearGuard Assembly (RH) 2 196-7113Guard Assembly (LH) 2 196-7114

47 Component of preceding assembly or group, quantity shown is quantity per assembly or group.48 Service Replaced by 237-8201.49 These components are only to repair retainer assembly. See Special Instruction SEHS8515.50 These components are not included in the roller group; quantities shown are required to mount each roller.

22

D5N, D5M, D4H, 561N, 561M, 561HD5N, D5M, XL/LGP SystemOne END GUIDING GUARDSMETRIC HARDWARE(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERWear Strip 4 271-6079Bolt (12 mm) 12 8T-4956Washer 12 8T-4223

D4H XL/LGP SystemOne END GUIDING GUARDSLEVEL ONE GUIDING

(PER MACHINE) QUANTITY PART NUMBERWear Strip 8 271-6079 (51)

Bolt (12 mm) 24 8T-4956Washer 24 8T-4223

D5N/M LGP, D5N/M XL END GUIDING GUARDSMETRIC HARDWARE (USE WITH D5M LGP 7 ROLLER FRAME CONFIGURATION)

(PER MACHINE) QUANTITY PART NUMBERFrontGuard Assembly 2 109-0058Guard Assembly 2 109-0059Wear Strip 4 233-5001Bolt (12 mm) 12 8T-4192Washer 12 8T-4223RearGuard Assembly 2 109-0060Guard Assembly 2 109-0061Wear Strip 4 233-5001Bolt (12 mm) 12 8T-4192Washer 12 8T-4223

D5N/M LGP END GUIDING GUARDSMETRIC HARDWARE (USE WITH 8 ROLLER FRAME CONFIGURATION)

3CR1232-UP, 3DR464-UP

(PER MACHINE) QUANTITY PART NUMBERFrontGuard Assembly 2 183-5213Guard Assembly 2 183-5214Wear Strip 4 233-5001Bolt (12 mm) 12 8T-4192Washer 12 8T-4223

51 Support bar 9U-9244 required with this wear strip, weld support bar to end guide guard assembly, see Special Instructions REHS2570 fordirections.

23

D5N, D5M, D4H, 561N, 561M, 561HD5N/M LGP END GUIDING GUARDSMETRIC HARDWARE (USE WITH 8 ROLLER FRAME CONFIGURATION)3CR1232-UP, 3DR464-UP(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERRearGuard Assembly 2 183-5949Guard Assembly 2 183-5950Wear Strip 4 233-5001Bolt (12 mm) 12 8T-4192Washer 12 8T-4223

561N END GUIDING GUARDSMETRIC HARDWARE

(PER MACHINE) QUANTITY PART NUMBERFrontGuard Assembly (RH) 2 196-7111Guard Assembly (LH) 2 196-1712Wear Strip 4 233-5001Bolt (12 mm) 12 8T-4192Washer 12 8T-4223Guard Assembly (RH) 2 196-7113RearGuard Assembly (LH) 2 196-7114Wear Strip 4 233-5001Bolt (12 mm) 12 8T-4192Washer 12 8T-4223

D4H, D4H LGP, D4H XL, 561H END GUIDING GUARDSHEAVY DUTY AND ROTATING BUSHING TRACK ONLY (INCH MOUNTING HARDWARE)

(PER MACHINE) QUANTITY PART NUMBERFrontGuard Assembly 2 108-3990Guard Assembly 2 108-3995Bolt 12 5P-2228Washer 12 8T-4223Strip 4 9U-9198Spacer (52) 4 108-4250RearGuard Assembly 2 108-3998Guard Assembly 2 108-4002Bolt 12 5P-2228

52 Required for Sealed and Lubricated Track.

24

D5N, D5M, D4H, 561N, 561M, 561HD4H, D4H LGP, D4H XL, 561H END GUIDING GUARDSHEAVY DUTY AND ROTATING BUSHING TRACK ONLY (INCH MOUNTING HARDWARE)(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERWasher 12 8T-4223Strip 4 9U-9198Spacer 4 108-4250

D4H, D4H LGP, D4H XL, 561H END GUIDING GUARDSSEALED AND LUBRICATED TRACK ONLY (INCH MOUNTING HARDWARE)

(PER MACHINE) QUANTITY PART NUMBERFrontGuard Assembly 2 8E-9766Guard Assembly 2 8E-9767Bolt 12 5P-2228Washer 12 8T-4223Strip 4 9U-9198RearGuard Assembly 2 6Y-9925Guard Assembly 2 6Y-9926Bolt 12 5P-2228Washer 12 8T-4223Strip 4 9U-9198

D5N, D5M, D4H XL SystemOne TRACK ROLLER GUARDS (FULL LENGTH)LEVEL THREE GUIDING

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly (RH) 2 261-2040Guard Assembly (LH) 2 261-2041Tube 8 205-6140Bolt (16 mm) 8 110-6968Washer 16 9X-8257Nut 8 8T-4778Bolt (16 mm) (D5N/M) (Guard Assembly to Track Roller Frame 28 8T-4140Bolt (3/4 Inch) (D4H) (Guard Assembly to Track Roller Frame) 28 1A-8063Spacer 28 204-6365Bracket Assembly (RH) 2 248-3957Bracket Assembly (LH) 2 248-3955Bolt (12 mm) 8 8T-4956Washer 8 7X-0550

25

D5N, D5M, D4H, 561N, 561M, 561HD5N, D5M, D4H LGP SystemOne TRACK ROLLER GUARDS (FULL LENGTH)

LEVEL THREE GUIDING(PER MACHINE) QUANTITY PART NUMBERGuard Assembly (RH) 2 261-2042Guard Assembly (LH) 2 261-2043Tube 10 205-6140Bolt (16 mm) 10 110-6968Washer 20 9X-8257Nut 10 8T-4778Bolt (16 mm) (D5N/M) (Guard Assembly to Track Roller Frame) 28 8T-4140Bolt (3/4 Inch) (D4H) (Guard Assembly to Track Roller Frame) 28 1A-8063Spacer 28 204-6365Bracket Assembly (RH) 2 248-3957Bracket Assembly (LH) 2 248-3955Bolt (12 mm) 8 8T-4956Washer 8 7X-0550

D5M XL TRACK ROLLER GUARDS (FULL LENGTH)METRIC MOUNTING HARDWARE

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 108-4030Guard Assembly 2 108-4031Spacer (Mounting) 28 8G-5258Bolt - Mounting (16 mm) 28 8T-4140Tube 8 8V-4772Bolt - Cross-Tube (16 mm) 8 110-6968Washer 16 9X-8257Nut (16 mm) 8 8T-4778Plate 2 108-4016Plate 2 108-4017Bolt (12 mm) 12 8T-4139Washer 12 8T-4223

D5M LGP TRACK ROLLER GUARDS (FULL LENGTH)METRIC MOUNTING HARDWARE (USE WITH 7 ROLLER FRAME CONFIGURATION)

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 108-4033Guard Assembly 2 108-4036Spacer (Mounting) 36 8G-5258Bolt - Mounting (16 mm) 36 8T-4140Tube 10 8V-4772Bolt - Cross-Tube (16 mm) 10 110-6968Washer 20 9X-8257

26

D5N, D5M, D4H, 561N, 561M, 561HD5M LGP TRACK ROLLER GUARDS (FULL LENGTH)METRIC MOUNTING HARDWARE (USE WITH 7 ROLLER FRAME CONFIGURATION)(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERNut (16 mm) 10 8T-4778Plate 2 108-4016Plate 2 108-4017Bolt (12 mm) 12 8T-4139Washer 12 8T-4223

D5M LGP TRACK ROLLER GUARDS (FULL LENGTH)METRIC MOUNTING HARDWARE (USE WITH 8 ROLLER FRAME CONFIGURATION)

3CR1232-UP, 3DR464-UP

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 183-5204Guard Assembly 2 183-5207Spacer (Mounting) 28 204-6365Bolt - Mounting (16 mm) 28 8T-4140Tube 10 8V-4772Bolt - Cross-Tube (16 mm) 10 110-6968Washer 20 9X-8257Nut (16 mm) 10 8T-4778Plate 4 183-8468Bolt (12 mm front) 4 8T-4956Bolt (12 mm front) 4 8T-4183Bolt (12 mm rear) 4 8T-4139Washer 12 8T-4223

561N TRACK ROLLER GUARDS (FULL LENGTH)METRIC HARDWARE

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly (RH) 2 205-6158Guard Assembly (LH) 2 205-6159Tube 10 205-6140Bolt (16 mm) 10 110-6968Washer 20 9X-8257Nut 10 8T-4778Bolt (16 mm) 28 8T-4140Spacer 28 204-6365Bracket Assembly (RH) 2 205-6142Bracket Assembly (LH) 2 205-6143Bolt (12 mm) 8 8T-4956Washer 8 7X-0550

27

D5N, D5M, D4H, 561N, 561M, 561H561N TRACK ROLLER GUARDS (FULL LENGTH)METRIC HARDWARE(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERBolt (Rear) (12 mm) 4 8T-4194Washer 4 7X-0550

D4H XL TRACK ROLLER GUARDS (FULL LENGTH)HEAVY DUTY AND ROTATING BUSHING TRACK ONLY (INCH MOUNTING HARDWARE)

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 108-4030Guard Assembly 2 108-4031Tube 8 8V-4772Bolt 8 5P-4625Bolt 28 8T-8924Bolt 12 8T-8917Washer 12 8T-4223Washer 16 8T-4122Nut 8 3K-2889Plate 2 108-4016Plate 2 108-4017Spacer 28 6K-5640

D4H LGP TRACK ROLLER GUARDS (FULL LENGTH)HEAVY DUTY AND ROTATING BUSHING TRACK ONLY (INCH MOUNTING HARDWARE)

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 108-4033Guard Assembly 2 108-4036Tube 10 8V-4772Bolt 10 5P-4625Bolt 36 8T-8924Bolt 12 8T-8917Washer 12 8T-4223Washer 20 8T-4122Nut 10 3K-2889Plate 2 108-4016Plate 2 108-4017Spacer 36 6K-5640

D4H TRACK ROLLER GUARDS (FULL LENGTH)SEALED AND LUBRICATED TRACK ONLY (INCH MOUNTING HARDWARE)

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 6Y-9932Guard Assembly 2 6Y-9933

28

D5N, D5M, D4H, 561N, 561M, 561HD4H TRACK ROLLER GUARDS (FULL LENGTH)SEALED AND LUBRICATED TRACK ONLY (INCH MOUNTING HARDWARE)(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERTube 4 8V-4772Bolt 4 5P-4625Bolt 28 8T-8924Bolt 16 8T-8917Washer 16 8T-4223Washer 8 8T-4122Washer 4 3K-2889Plate 4 8Y-0356Spacer 28 6K-5640

D4H LGP TRACK ROLLER GUARDS (FULL LENGTH)SEALED AND LUBRICATED TRACK ONLY (INCH MOUNTING HARDWARE)

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 6Y-9949Guard Assembly 2 6Y-9939Tube 10 8V-4772Bolt 10 5P-4625Bolt 40 8T-8924Bolt 16 8T-8917Washer 16 8T-4223Washer 20 8T-4122Washer 10 3K-2889Plate 4 8Y-0356Spacer 40 6K-5640

D5N/M,XL SystemOne CENTER GUIDING GUARDSLEVEL TWO GUIDING, GUARD ASSEMBLY POSITIONED OVER #2 AND #5 ROLLER GROUPS

METRIC HARDWARE(PER MACHINE) QUANTITY PART NUMBERGuard Assembly (Roller #2) 2 251-8580Guard Assembly (Roller #5) 2 251-8578Bolt (16 mm) 16 8T-4140Spacer 16 204-6365

29

D5N, D5M, D4H, 561N, 561M, 561HD4H XL SystemOne CENTER GUIDING GUARDS

LEVEL TWO GUIDING, GUARD ASSEMBLY POSITIONED OVER #2 AND #5 ROLLER GROUPINCH HARDWARE

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 251-8578Bolt (3/4 Inch) 16 1A-8063Spacer 16 204-6365

D5N, D5M, LGP SystemOne CENTER GUIDING GUARDSLEVEL ONE GUIDING, GUARD ASSEMBLY POSITIONED OVER #4 ROLLER GROUP

METRIC HARDWARE(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 251-8580Bolt (16 mm) 8 8T-4140Spacer 8 204-6365

D5N/M,LGP SystemOne CENTER GUIDING GUARDSLEVEL TWO GUIDING, GUARD ASSEMBLY POSITIONED OVER #3 AND #6 ROLLER GROUPS


D4H LGP SystemOne CENTER GUIDING GUARDSLEVEL ONE GUIDING, GUARD ASSEMBLY POSITIONED OVER #4 ROLLER GROUP

INCH HARDWARE(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 251-8580Bolt (3/4 Inch) 8 1A-8063Spacer 8 204-6365

D4H LGP SystemOne CENTER GUIDING GUARDSLEVEL TWO GUIDING, GUARD ASSEMBLY POSITION OVER #3 & #6 ROLLER GROUP

INCH HARDWARE(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 251-8580Bolt (3/4 Inch) 16 1A-8063Spacer 16 204-6365

30

D5N, D5M, D4H, 561N, 561M, 561HD5N LGP, D5N XL, 561N, 561M CENTER GUIDING GUARDS

GUARD ASSEMBLY POSITIONED OVER #4 ROLLER GROUP(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 205-6155Bolt (16 mm) 8 8T-4140Spacer 8 204-6365

561N CENTER GUIDING GUARDSGUARD ASSEMBLY POSITIONED OVER #3 AND #6 ROLLER GROUPS

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 205-6157Bolt (16 mm) 16 8T-4140Spacer 16 204-6365

D5M LGP, D5M XL CENTER GUIDING GUARDSHEAVY DUTY AND ROTATING BUSHING TRACK ONLY (METRIC MOUNTING HARDWARE)

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 183-8467Bolt 8 8T-4140Spacer 8 204-6365

D4H, D4H LGP, D4H XL, 561H CENTER GUIDING GUARDSHEAVY DUTY AND ROTATING BUSHING TRACK ONLY (INCH MOUNTING HARDWARE)

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 108-4022Bolt 8 8T-8924Spacer 8 6K-5640

D4H, D4H LGP, D4H XL CENTER GUIDING GUARDSSEALED AND LUBRICATED TRACK ONLY (INCH MOUNTING HARDWARE)

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 6Y-9934Bolt 4 5P-4625Bolt 8 8T-8924Bolt 16 7X-3328Washer 8 8T-4122Washer 16 8T-4223Lock Nut 4 3K-2889Tube 4 8V-4772Bar 4 6Y-9935Spacer 8 6K-5640

31

D6N, D6M, D5HD6N, D6M XL/LGP SystemOne™ TRACK

PRESS FIT MASTERD6N/M XL (40 SECTION): 2YS1-UP, 3WN1-UP, 4HS1-UP, 5WR1-UP, 6LR1-UP, AKM1-UP, CBL1-UP, CCK1-UP, ALH1-UP, CBF1-UP,CBJ1-UP,

JAH-UP,DJA1-UP, D6N/M LGP (46 SECTION): 2RN1-UP, 4GS1-UP, 4JN1-UP, 5NR1-UP, ALR1-UP, CCG1-UP, ALY1-UP, CCS1-UP, DJY1-UP

7.50" (190.5 mm) PITCH – 20 mm BOLT

PART NUMBER XL 40 Section LGP 46 SectionFINE GRADER47 Section

Link Assembly (Quantity 2) 235-2511 351-0961 351-0962Components of Link AssemblyLink Box Standard (1) 351-0959 20 23 22Link Box Offset (2) 351-0960 – – 1Standard Link 235-2501 38 44 44Standard Link (Press Fit) (3) 235-2501 2 2 2Track Hardware (3)

Bolt (M20) 6Y-0846 156 184 188Nut 9W-3361 156 184 188

D6N, D6M XL/LGP SystemOne™ TRACK (Clamp Master)CLAMP MASTER

D6N/M XL (40 SECTION): 2YS1-UP, 3WN1-UP, 4HS1-UP, 5WR1-UP, 6LR1-UP, AKM1-UP, CBL1-UP, CCK1-UP, ALH1-UP, CBF1-UP,CBJ1-UP,JAH1-UP, DJA1-UP

D6N/M LGP (46 SECTION): 2RN1-UP, 4GS1-UP, 4JN1-UP, 5NR1-UP, ALR1-UP, CCG1-UP, ALY1-UP, CCS1-UP, DJY1-UP7.50" (190.5 mm) PITCH – 20 mm BOLT


Link Assembly (Quantity 2) 235-2511 351-0961 351-0962Components of Link AssemblyLink Box Standard (1) 351-0959 20 23 22Link Box Offset (2) 351-0960 – – 1Standard Link 235-2501 38 44 44Clamp Master Link (3) 318-2375 2 2 2Track Hardware (3)

Bolt (M20) 6Y-0846 156 180 184Nut 9W-3361 156 180 184Track Bolt Master (M20) 254-0225 4 4 4

1 Link Box Standard that is greater than 40% worn should be replaced with part number 264-9764.2 Link Box Offset that is greater than 40% worn should be replaced with part number 339-0265.3 Not part of link assembly; required to assemble track group.

32

D6N, D6M, D5HD5H XL/LGP SYSTEM ONE TRACK

PRESS FIT MASTERD5H XL (39 SECTION): 8RJ1-UP

D5H LGP (46 SECTION):1DD4000-UP, 4KD4000-UP, 9HC4000-UP, 2SD4000-UP7.50" (190.5 mm) PITCH – 20 mm BOLTPART NUMBER XL 39 Section LGP 46 Section

Link Assembly (Quantity 2) 246-5753 (4) 351-0961Components of Link AssemblyLink Box Standard (5) 351-0959 18 23Link Box Offset (6) 351-0960 1 –

Standard Link 235-2501 36 44Standard Link (Press Fit) (7) 235-2501 2 2Track Hardware (7)

Bolt (M20) 6Y-0846 156 184Nut 9W-3361 156 184

D5H XL/LGP SYSTEM ONE TRACKCLAMP MASTER

D5H XL (39 SECTION): 8RJ1-UPD5H LGP (46 SECTION):1DD4000-UP, 4KD4000-UP, 9HC4000-UP, 2SD4000-UP

7.50" (190.5 mm) PITCH – 20 mm BOLTPART NUMBER XL 39 Section LGP 46 Section

Link Assembly 246-5753 (4) 351-0961Components of Link AssemblyLink Box Standard (5) 351-0959 18 23Link Box Offset (6) 351-0960 1 –

Standard Link 235-2501 36 44Clamp Master Link (7) 318-2375 2 2Track Hardware (7)

Bolt (M20) 6Y-0846 152 180Nut 9W-3361 152 180Track Bolt Master (M20) 254-0225 4 4

D6N, D6M, D5H HEAVY DUTY SEALED AND LUBRICATED TRACK*D6N/M XL (40 SECTION): 2YS1-UP, 3WN1-UP, 4HS1-UP, 5WR1-UP, 6LR1-UP, AKM1-UP, CBL1-UP, CCK1-UP, ALH1-UP, CBF1-UP,CBJ1-UP,

GHS1-UP, MLW1-UP6N/M LGP, D5H LGP (46 SECTION): 1DD5879-UP, 2RN1-UP, 2SD5552-UP, 4GS1-UP, 4JN1-UP, 4KD5588-UP, 5NR1-UP, 9HC5520-UP, ALR1-

UP, CCG1-UP, ALY1-UP, CCS1-UPDD6M, D5H FINE GRADER (47 SECTION):1DD, 9HC

7.50" (190.5 mm) PITCH - 3/4" BOLT

PARTNUMBER XL 40 Section LGP 46 Section

FINE GRADER47 Section

Link Assembly – 47 Section 110-2976 106-1636 106-1634Track Links

4 Contains Standard Link Box 235-2509.5 Link Box Standard that is greater than 40% worn should be replaced with part number 264-9764.6 Link Box Offset that is greater than 40% worn should be replaced with part number 339-0265.7 Not part of link assembly; required to assemble track group.

33

D6N, D6M, D5HD6N, D6M, D5H HEAVY DUTY SEALED AND LUBRICATED TRACK*D6N/M XL (40 SECTION): 2YS1-UP, 3WN1-UP, 4HS1-UP, 5WR1-UP, 6LR1-UP, AKM1-UP, CBL1-UP, CCK1-UP, ALH1-UP, CBF1-UP,CBJ1-UP,GHS1-UP, MLW1-UP6N/M LGP, D5H LGP (46 SECTION): 1DD5879-UP, 2RN1-UP, 2SD5552-UP, 4GS1-UP, 4JN1-UP, 4KD5588-UP, 5NR1-UP, 9HC5520-UP, ALR1-UP, CCG1-UP, ALY1-UP, CCS1-UPDD6M, D5H FINE GRADER (47 SECTION):1DD, 9HC7.50" (190.5 mm) PITCH - 3/4" BOLT(Cont'd.)

PARTNUMBER XL 40 Section LGP 46 Section

FINE GRADER47 Section

Link Assembly – 47 Section 110-2976 106-1636 106-1634RH Pin End Master 106-1627 1 1 1LH Pin End Master 106-1628 1 1 1RH Bushing End Master 106-1629 1 1 1LH Bushing End Master 106-1630 1 1 1RH Regular 106-1625 39 45 46LH Regular 106-1626 39 45 46Other ComponentsPin 179-0126 40 46 47Bushing 106-1618 40 46 47Seal Assembly (Rigid) 250-3988 80 92 94Thrust Ring 152-8070 80 92 94Stopper 5G-2247 40 46 47Plug 6Y-0473 40 46 47Track Hardware (8)

Bolt (Grouser Shoe) 6V-1792 156 180 184Bolt (Self-Cleaning Shoe) 6V-1792 – 90 92Bolt (Self- Cleaning Shoe) 107-0718 – 90 92Nut 1S-1860 156 180 184Master Bolt (Grouser Shoe) 107-0719 2 2 2Master Bolt (Grouser Shoe) 106-1642 2 2 2Master Bolt (Self-Cleaning Shoe) 107-0719 – 2 2Master Bolt (Self-Cleaning Shoe) 107-0717 – 2 2Special Sets/GroupsSeal Set (92 Seal Assemblies) 252-7855 1 1 1Bushing and Seal Group (37 Sections) 115-2439 1 1 1

* When installing Heavy Duty Track on existing machines, refer to IRMs UC93-21 and UC 94-17. Master shoe required with heavy duty track. Aslo refer to SpecialInstructions SEHS9797 and SEHS9585 for additional guarding and track shoe rework options.

D6N XL, D6M XL MADE TO ORDER (MTO) TRACK GROUPSTRACK GROUPS NOT STOCKED IN DISTRIBUTION FACILITIES

QUANTITY PART NUMBERLink Assembly Used 110-2976Moderate Service Shoe – 24" (610 mm) 2 110-2978


34

D6N, D6M, D5HD6N LGP, D6M LGP MADE TO ORDER (MTO) TRACK GROUPS

TRACK GROUPS NOT STOCKED IN DISTRIBUTION FACILITIESQUANTITY PART NUMBER

Link Assembly Used 106-1636Moderate Service Shoe – 34" (865 mm) 2 106-1646Extreme Service Shoe – 34" (865 mm) 2 254-7199

D6M/N GENERAL DUTY LINK ASSEMBLIES7.50" (190.5 mm) PITCH – ¾" Bolt

(Per Machine) QUANTITY XL 40 Section Part Number LGP 46 Section Part NumberLink Assembly 2 416-7044 416-7042

Utilizes Heavy Duty UC components for repair parts. Reference the D6N, D6M, D5H HEAVY DUTY SEALED AND LUBRICATED TRACK Section.

D6M/N XL GENERAL DUTY TRACK GROUPSLink Assembly Used 416-7044 QUANTITY PART NUMBERModerate Service Shoe –24” (610 mm) 2 416-7045

D6M/N LGP GENERAL DUTY TRACK GROUPSLink Assembly Used 416-7042 QUANTITY PART NUMBERModerate Service Shoe –34” (865 mm) 2 416-7043

D6M/N GENERAL DUTY UNDERCARRIAGE ARRANGEMENTS*Machine Configuration QUANTITY PART NUMBERXL 1 433-0304LGP 1 433-0303* Undercarriage Arrangement part numbers allow for quick look up of pricing a complete General Duty Undercarriage. They are not available for purchase. (In-formation purpose only) When the Undercarriage Arrangement PN’s are placed in DBS/ANTARES they will provide a list of PN’s to order. Includes the parts nec-essary to do a complete UC bottom replacement; sprockets and hardware, Carrier Rollers, Bottom Rollers, Idlers, and Track Groups(includes: Links Assemblies,Shoes, and Hardware).

D5H STD/XL HEAVY DUTY SEALED AND LUBRICATED TRACK*D5H STD (37 SECTION): 1YD5522-UP, 3MD5598-UP, 7NC5525-UP, 8RC5890-UP

D5H XL (39 SECTION): 8RJ4217-UP7.50" (190.5 mm) PITCH - 3/4" BOLT

PART NUMBER STD 37 Section XL 39 SectionLink Assembly (Quantity 2) 106-1635 106-1637Track LinksRH Pin End Master 106-1627 1 1LH Pin End Master 106-1628 1 1RH Bushing End Master 106-1629 1 1LH Bushing End Master 106-1630 1 1RH Regular 106-1625 36 38LH Regular 106-1626 36 38

35

D6N, D6M, D5HD5H STD/XL HEAVY DUTY SEALED AND LUBRICATED TRACK*D5H STD (37 SECTION): 1YD5522-UP, 3MD5598-UP, 7NC5525-UP, 8RC5890-UPD5H XL (39 SECTION): 8RJ4217-UP7.50" (190.5 mm) PITCH - 3/4" BOLT(Cont'd.)

PART NUMBER STD 37 Section XL 39 SectionLink Assembly (Quantity 2) 106-1635 106-1637Other ComponentsPin 179-0126 37 39Bushing 106-1618 37 39Seal Assembly (Rigid) 250-3988 74 78Thrust Ring 152-8070 74 78Stopper 5G-2247 37 39Plug 6Y-0473 37 39Track Hardware (9)

Bolt 6V-1792 144 152Nut 1S-1860 144 152Master Bolt 107-0719 2 2Master Bolt 106-1642 2 2Special Sets/GroupsSeal Set (92 Seal Assemblies) 252-7855 1 1Bushing and Seal Group (37 Sections) 115-2439 1 1

* When installing Heavy Duty Track on existing machines, refer to IRMs UC93-21 and UC94-17. Master shoe required with heavy duty track. Also refer to SpecialInstructions SEHS9797 and SEHS9585 for additional guarding and track shoe rework options.

D6N XL/LGP, D6M XL/LGP, D6M D5H FINE GRADER, ROTATING BUSHING TRACK*D6N/M XL (40 SECTION): 2YS1-UP, 3WN1-UP, 4HS1-UP, 5WR1-UP, 6LR1-UP, 9ZM1-UP, AKM1-UP, CBL1-UP, CCK1-UP, ALH1-UP, CBF1-

UP, CBJ1-UPD6N/M LGP (46 SECTION): 1DD5879-UP, 2RN1-UP, 2SD5552-UP, 4GS1-UP, 4JN1-UP, 4KD5588-UP, 5NR1-UP, 9HC5520-UP, ALR1-UP,

CCG1-UP, ALY1-UP, CCS1-UPD6M D5H FINE GRADER (47 SECTION): 1DD, 9HC

7.50" (190.5 mm) PITCH - 3/4" BOLT


Link Assembly – 46 Section 152-8043 (10) 152-8041 (11) 152-8047 (12)

Track LinksRH Pin End Master 106-1627 1 1 1LH Pin End Master 106-1628 1 1 1RH Bushing End Master (13) 165-1752 1 1 1LH Bushing End Master (13) 165-1753 1 1 1RH Regular (13) 165-1750 39 45 46LH Regular (13) 165-1751 39 45 46

9 Not part of link assembly; required to assemble track group.10 Serviced replaced by 110-2976 (Heavy Duty) Refer to IRM PELJ1141 for conversion options.11 Serviced replaced by 106-1636 (Heavy Duty) Refer to IRM PELJ1141 for conversion options.12 Serviced replaced by 106-1634 (Heavy Duty) Refer to IRM PELJ1141 for conversion options.13 Joint assemblies (includes link and insert). Insert not serviced.

36

D6N, D6M, D5HD6N XL/LGP, D6M XL/LGP, D6M D5H FINE GRADER, ROTATING BUSHING TRACK*D6N/M XL (40 SECTION): 2YS1-UP, 3WN1-UP, 4HS1-UP, 5WR1-UP, 6LR1-UP, 9ZM1-UP, AKM1-UP, CBL1-UP, CCK1-UP, ALH1-UP, CBF1-UP, CBJ1-UPD6N/M LGP (46 SECTION): 1DD5879-UP, 2RN1-UP, 2SD5552-UP, 4GS1-UP, 4JN1-UP, 4KD5588-UP, 5NR1-UP, 9HC5520-UP, ALR1-UP,CCG1-UP, ALY1-UP, CCS1-UPD6M D5H FINE GRADER (47 SECTION): 1DD, 9HC7.50" (190.5 mm) PITCH - 3/4" BOLT(Cont'd.)


Link Assembly – 46 Section 152-8043 (10) 152-8041 (11) 152-8047 (12)

Other ComponentsPin 156-4701 40 46 47Bushing 165-1768 40 46 47Seal Assembly (Rigid) 250-3988 160 184 188Thrust Ring 152-8070 160 184 188Stopper 5G-2247 40 46 47Plug 6Y-0473 40 46 47Track Hardware (14)

Bolt 6V-1792 156 180 184Nut 1S-1860 156 180 184Master Bolt 106-1642 2 2 2Master Bolt 107-0719 2 2 2* Rotating Bushing Track is an application specific undercarriage designed for high abrasion/low impact applications (4,000 hour system life or less). When in-stalling Rotating Bushing Track on existing machines, refer to IRM UC95-13 for installation and guarding information. Also refer to Special Instruction SEHS9797for additional guarding information and SEHS9725 for shoe rework options. For servicing information refer to Special Instruction SEHS9542. Master shoe requiredwith Rotating Bushing Track.

D5H STD/XL ROTATING BUSHING TRACK*D5H STD (37 SECTION): 1YD5522-UP, 3MD5598-UP, 7NC5525-UP, 8RC5890-UP

D5H XL (39 SECTION): 8RJ4217-UP7.50" (190.5 mm) PITCH - 3/4" BOLTPART NUMBER STD 37 Section XL 39 Section

Link Assembly (Quantity 2) 152-8044 (15) 152-8045 (16)

Track LinksRH Pin End Master 106-1627 1 1LH Pin End Master 106-1628 1 1RH Bushing End Master (17) 165-1752 1 1LH Bushing End Master (17) 165-1753 1 1RH Regular (17) 165-1750 36 38LH Regular (17) 165-1751 36 38Other Components

10 Serviced replaced by 110-2976 (Heavy Duty) Refer to IRM PELJ1141 for conversion options.11 Serviced replaced by 106-1636 (Heavy Duty) Refer to IRM PELJ1141 for conversion options.12 Serviced replaced by 106-1634 (Heavy Duty) Refer to IRM PELJ1141 for conversion options.14 Not part of link assembly; required to assemble track group15 Serviced replaced by 106-1635 (Heavy Duty) Refer to IRM PELJ1141 for conversion options.16 Serviced replaced by 106-1637 (Heavy Duty) Refer to IRM PELJ1141 for conversion options.17 Joint assemblies (includes link and insert). Insert not serviced.

37

D6N, D6M, D5HD5H STD/XL ROTATING BUSHING TRACK*D5H STD (37 SECTION): 1YD5522-UP, 3MD5598-UP, 7NC5525-UP, 8RC5890-UPD5H XL (39 SECTION): 8RJ4217-UP7.50" (190.5 mm) PITCH - 3/4" BOLT(Cont'd.)

PART NUMBER STD 37 Section XL 39 SectionLink Assembly (Quantity 2) 152-8044 (15) 152-8045 (16)

Pin 156-4701 37 39Bushing 165-1768 37 39Seal Assembly (Rigid) 250-3988 148 156Thrust Ring 152-8070 148 156Stopper 5G-2247 37 39Plug 6Y-0473 37 39Track Hardware (18)

Bolt 6V-1792 144 152Nut 1S-1860 144 152Master Bolt 106-1642 2 2Master Bolt 107-0719 2 2* Rotating Bushing Track is an application specific undercarriage designed for high abrasion/low impact applications (4,000 hour system life or less). When in-stalling Rotating Bushing Track on existing machines, refer to IRM UC95-13 for installation and guarding information. Also refer to Special Instruction SEHS9797for additional guarding information and SEHS9725 for shoe rework options. For servicing information refer to Special Instruction SEHS9542. Master shoe requiredwith Rotating Bushing Track.

D5H STD/XL/LGP/FINE GRADER HYBRID TRACKD5H XL (39 SECTION):8RJ1-4216

D5H STD (35 SECTION):1YD1-5521, 3MD1-5597, 7NC1-5524, 8RC1-5889D5H LGP (46 SECTION):1DD1-5878, 2SD1-5551, 4KD1-5588, 9HC1-5519

D5H FINE GRADER (47 SECTION):1DD, 9HC7.50" (190.5 mm) PITCH – 5/8" BOLT

PARTNUMBER

STD 37Section

XL 39Section

LGP 46Section

Fine Grader47 Section

Link Assembly – (Quantity 2) 230-7272 238-6928 238-6930 238-6931Track LinksRH Pin End Master 244-6571 1 1 1 1LH Pin End Master 244-6572 1 1 1 1RH Bushing End Master 244-6573 1 1 1 1LH Bushing End Master 244-6574 1 1 1 1RH Regular 229-6909 36 38 45 46LH Regular 229-6910 36 38 45 46Other ComponentsPin 160-7818 (19) 37 39 46 47Bushing 229-6915 37 39 46 47Seal Assembly (Rigid) 250-3988 74 78 92 94

15 Serviced replaced by 106-1635 (Heavy Duty) Refer to IRM PELJ1141 for conversion options.16 Serviced replaced by 106-1637 (Heavy Duty) Refer to IRM PELJ1141 for conversion options.18 Not part of link assembly; required to assemble track group19 Former pin 3P-3880 (Use 9G-1642 stopper).

38

D6N, D6M, D5HD5H STD/XL/LGP/FINE GRADER HYBRID TRACKD5H XL (39 SECTION):8RJ1-4216D5H STD (35 SECTION):1YD1-5521, 3MD1-5597, 7NC1-5524, 8RC1-5889D5H LGP (46 SECTION):1DD1-5878, 2SD1-5551, 4KD1-5588, 9HC1-5519D5H FINE GRADER (47 SECTION):1DD, 9HC7.50" (190.5 mm) PITCH – 5/8" BOLT(Cont'd.)

PARTNUMBER

STD 37Section

XL 39Section

LGP 46Section


Link Assembly – (Quantity 2) 230-7272 238-6928 238-6930 238-6931Thrust Ring 6Y-6481 74 78 92 94Stopper 5G-2247 37 39 46 47Plug 6Y-0473 37 39 46 47Track Hardware (20)

Bolt (Grouser Shoes) 9G-3110 144 152 180 184Bolt (Self Cleaning Shoe) 9G-3110 – – 90 –

Bolt (Self Cleaning Shoe) 3T-3884 – – 90 –

Nut 1M-1408 144 152 180 184Master Bolt 3T-8580 2 2 2 2Master Bolt 3T-8601 2 2 2 2Master Bolt (Self-Cleaning Shoe) 3T-8580 – – 2 –

Master Bolt (Self-Cleaning Shoe) 3T-3889 – – 2 –

Special Sets/GroupsSeal Set (92 Seal Assemblies) 252-7855 1 1 1 1Bushing and Seal Group (37 Sections) 293-9146 1 1 1 1

D5H STD/XL/LGP/FINE GRADER SEALED AND LUBRICATED TRACKRIGID SEAL ASSEMBLY

D5H STD (35 SECTION):1YD1-5521, 3MD1-5597, 7NC1-5524, 8RC1-5889D5H XL (39 SECTION):8RJ1-4216

D5H LGP (46 SECTION):1DD1-5878, 2SD1-5551, 4KD1-5588, 9HC1-5519D5H FINE GRADER (47 SECTION):1DD, 9HC

7.50" (190.5 mm) PITCH – 5/8" BOLT

PARTNUMBER

STD 37Section

XL 39Section

LGP 46Section


Link Assembly – (Quantity 2) 6Y-5412 (21) 8E-9820 (22) 6Y-5414 (23) 8E-4160 (24)

Track LinksRH Pin End Master 8E-0885 1 1 1 1LH Pin End Master 8E-0886 1 1 1 1RH Bushing End Master 8E-0887 1 1 1 1LH Bushing End Master 8E-0888 1 1 1 1RH Regular 6Y-9267 36 38 45 46LH Regular 6Y-9268 36 38 45 46

20 Not part of link assembly; required to assemble track group.21 Serviced replaced by 230-7272 hybrid link assembly.22 Serviced replaced by 238-6928 hybrid link assembly.23 Serviced replaced by 238-6930 hybrid link assembly.24 Serviced replaced by 238-6931 hybrid link assembly.

39

D6N, D6M, D5HD5H STD/XL/LGP/FINE GRADER SEALED AND LUBRICATED TRACKRIGID SEAL ASSEMBLYD5H STD (35 SECTION):1YD1-5521, 3MD1-5597, 7NC1-5524, 8RC1-5889D5H XL (39 SECTION):8RJ1-4216D5H LGP (46 SECTION):1DD1-5878, 2SD1-5551, 4KD1-5588, 9HC1-5519D5H FINE GRADER (47 SECTION):1DD, 9HC7.50" (190.5 mm) PITCH – 5/8" BOLT(Cont'd.)

PARTNUMBER

STD 37Section

XL 39Section

LGP 46Section


Link Assembly – (Quantity 2) 6Y-5412 (21) 8E-9820 (22) 6Y-5414 (23) 8E-4160 (24)

Other ComponentsPin 160-7818 (25) 37 39 46 47Bushing 6Y-0929 37 39 46 47Seal Assembly (Rigid) 250-3988 74 78 92 94Thrust Ring 6Y-6481 74 78 92 94Stopper 5G-2247 37 39 46 47Plug 6Y-0473 37 39 46 47Track Hardware (26)

Bolt (Grouser Shoes) 9G-3110 144 152 180 184Bolt (Self Cleaning Shoe) 9G-3110 – – 90 –

Bolt (Self Cleaning Shoe) 3T-3884 – – 90 –

Nut 1M-1408 144 152 180 184Master Bolt 3T-8580 2 2 2 2Master Bolt 3T-8601 2 2 2 2Master Bolt (Self-Cleaning Shoe) 3T-8580 – – 2 –

Master Bolt (Self-Cleaning Shoe) 3T-3889 – – 2 –

Special Sets/GroupsSeal Set (92 Seal Assemblies) 252-7855 1 1 1 1Bushing and Seal Group (37 Sections) 6Y-5405 1 1 1 1

D5H STD/XL/LGP SEALED AND LUBRICATEDCRESCENT SEAL ASSEMBLY

D5H STD (35 SECTION):1YD1-5521, 3MD1-5597, 7NC1-5524, 8RC1-5889D5H XL (39 SECTION):8RJ1-4216

D5H LGP (46 SECTION):1DD1-5878, 2SD1-5551, 4KD1-5588, 9HC1-55197.50" (190.5 mm) PITCH – 5/8" BOLT

QUANTITY PART NUMBERLink Assembly – 37 Section 2 – (27)

Track LinksRH Regular 36 3T-8405

21 Serviced replaced by 230-7272 hybrid link assembly.22 Serviced replaced by 238-6928 hybrid link assembly.23 Serviced replaced by 238-6930 hybrid link assembly.24 Serviced replaced by 238-6931 hybrid link assembly.25 Former pin 3P-3880 (Use 9G-1642 stopper).26 Not part of link assembly; required to assemble track group.27 If 37, 39, 46, section link assemblies are required upgrade to sealed and lubricated track with rigid seals.

40

D6N, D6M, D5HD5H STD/XL/LGP SEALED AND LUBRICATEDCRESCENT SEAL ASSEMBLYD5H STD (35 SECTION):1YD1-5521, 3MD1-5597, 7NC1-5524, 8RC1-5889D5H XL (39 SECTION):8RJ1-4216D5H LGP (46 SECTION):1DD1-5878, 2SD1-5551, 4KD1-5588, 9HC1-55197.50" (190.5 mm) PITCH – 5/8" BOLT(Cont'd.)


LH Regular 36 3T-8406Other ComponentsPin 37 160-7818 (28)

Bushing 37 6Y-0929Seal Assembly (Crescent) 74 3T-5631 (29)

Thrust Ring 74 9G-3106Stopper 37 5G-2247Plug 37 6Y-0473Track Hardware (30)

Bolt (Grouser Shoes) 144 9G-3110Bolt (Self Cleaning Shoe) (LGP, 46 Section) 90 9G-3110Bolt (Self Cleaning Shoe) (LGP. 46 Section) 90 3T-3884Nut 144 1M-1408Master Bolt (Grouser Shoes) 2 3T-8580Master Bolt (Grouser Shoes) 2 3T-8601Master Bolt (Self-Cleaning Shoe) (LGP 46 Section) 2 3T-8580Master Bolt (Self-Cleaning Shoe) (LGP 46 Section) 2 3T-3889

D6N LGP, D6M LGP, D5H LGP HEAVY DUTY TRI/QUAD TRACK*7.50" (190.5 mm) PITCH – 3/4" BOLT

QUAD TRACKQUANTITY

TRI TRACKQUANTITY

PARTNUMBER


Track LinksRH Pin End Master 1 1 (32) 106-1627LH Pin End Master 1 1 (33) 106-1628RH Bushing End Master 1 1 (32) 106-1629LH Bushing End Master 1 1 (33) 106-1630RH Regular 45 45 (32) 106-1625LH Regular 45 45 (33) 106-1626

27 If 37, 39, 46, section link assemblies are required upgrade to sealed and lubricated track with rigid seals.28 Former pin 3P-3880 (Use 9G-1642 stopper).29 Serviced Replaced By: 288-8173.30 Not part of link assembly; required to assemble track group.31 Refer to Heavy Duty Track section for component information.32 Required for right hand outrigger chain.33 Required for left hand outrigger chain.

41

D6N, D6M, D5HD6N LGP, D6M LGP, D5H LGP HEAVY DUTY TRI/QUAD TRACK*7.50" (190.5 mm) PITCH – 3/4" BOLT(Cont'd.)

QUAD TRACKQUANTITY

TRI TRACKQUANTITY

PARTNUMBER


Other ComponentsStub Pin 92 46 106-1610Stub Bushing 92 46 107-0720Track Hardware (Per side: Quad – 1 center chain & 2 outriggers; Tri – 1 center chain & 1 outrigger) (34)

Bolt 360 270 6V-1792Nut 360 270 1S-1860Master Bolt 4 3 106-1642Master Bolt 4 3 107-0719* When installing Heavy Duty Track on existing machines, refer to Special Instruction SEHS9797 for additional guarding information and SEHS9725 for shoe re-work options. For more information about quad and tri link track, refer to IRM UC91-18 and special instruction SEHS8881. Master shoe required with heavy dutytrack.

D6N, D6M, D5H SystemOne TRACK SHOES7.50" (190.5 mm) PITCH - 20 mm BOLT


Moderate Service 22.0" (560 mm) 246-5750 254-9051Moderate Service 24.0" (610 mm) 235-2504 254-9049Moderate Service 28.0" (710 mm) 246-5751 254-9048Moderate Service 33.0" (840 mm) 267-8910 355-1651Moderate Service 34.0" (860 mm) 235-2503 254-9047Extreme Service 20.0" (510 mm) 246-5749 254-9053Extreme Service 22.0" (560 mm) 246-5748 254-9052Extreme Service 24.0" (610 mm) 246-5747 254-9050Extreme Service (Center Hole) 24.0" (610 mm) 289-5210 –

Extreme Service 28.0" (710 mm) 293-9077 –

Extreme Service 33.0" (840 mm) 287-6104 313-4542Extreme Service (Center Hole) 33.0" (840 mm) 274-7839 313-4543Extreme Service 34.0" (860 mm) 267-6099 294-4813

D6N, D6M, D5H TRACK SHOES*HEAVY DUTY AND RBT SEALED AND LUBRICATED TRACK

7.50" (190.5 mm) PITCH – 3/4" BOLT

TYPE WIDTHREGULAR SHOEPART NUMBER

MASTER SHOEPART NUMBER STD XR XL LGP

Extreme Service 20.0" (510 mm) 106-1608 106-1617 Y Y Y NExtreme Service 22.0" (560 mm) 107-0713 107-0714 N Y Y Y

31 Refer to Heavy Duty Track section for component information.34 Not part of link assembly; required to assemble track group.

42

D6N, D6M, D5HD6N, D6M, D5H TRACK SHOES*HEAVY DUTY AND RBT SEALED AND LUBRICATED TRACK7.50" (190.5 mm) PITCH – 3/4" BOLT(Cont'd.)



Extreme Service 23.6" (600 mm) 132-1334 132-1336 N Y Y YExtreme Service(Trapezoidal hole)

33.0" (840 mm) 356-3431 356-3432 N N N Y

Extreme Service(Trapezoidal hole)

34.0" (860 mm) 256-9607 256-9608 N N N Y

Extreme Service 34.0" (860 mm) 222-1796 222-1797 N N N YModerate Service 18.0" (460 mm) 106-1603 106-1611 Y Y Y NModerate Service 20.0" (510 mm) 106-1604 106-1612 Y Y Y NModerate Service 22.0" (560 mm) 106-1607 106-1613 N Y Y NModerate Service 23.6" (600 mm) 117-0615 117-0616 N Y Y YModerate Service 28.0" (710 mm) 106-1602 106-1615 N N N YModerate Service 34.0" (860 mm) 106-1605 106-1616 N N N YSelf-Cleaning 34.0" (865 mm) 107-0715 107-0716 N N N YModerate Service (Tri) (RH) 26.0" (660 mm) 148-2487 148-2594 N N N YModerate Service (Tri) (LH) 26.0" (660 mm) 148-2494 148-2596 N N N YModerate Service (Tri) (RH)(Clipped Grouser)

30.0" (760 mm) 163-2922 163-2923 N N N Y

Moderate Service (Tri) (LH)(Clipped Grouser)

30.0" (760 mm) 163-2924 163-2925 N N N Y

Quad (MS) 26.0" (660 mm) 115-3328 115-3329 N N Y YQuad (MS) 32.0" (810 mm) 115-3330 115-3331 N N Y Y

* Heavy Duty Sealed & Lubricated Track has a different bolt pattern and bolt size than conventional Sealed & Lubricated Track. A procedure exists to reworkSealed & Lubricated Track shoes for use on Heavy Duty Track; refer to Special Instruction SEHS9725.

D6M/N GENERAL DUTY SHOESTrack Groups have Moderate Service shoes that are not serviced, Heavy Duty Moderate Service shoes are availablefor use on link assemblies. Refer to the table above for more information on offerings.

D5H TRACK SHOESHYBRID AND SEALED AND LUBRICATED TRACK

7.50" (190.5 mm) PITCH – 5/8" BOLT

TYPE WIDTHREGULAR SHOEPART NUMBER STD XR XL LGP

Extreme Service 20.0" (510 mm) 6Y-9416 Y Y Y NExtreme Service 22.0" (560 mm) 8E-9827 N Y Y NExtreme Service 23.6" (600 mm) 8E-9825 N Y Y YModerate Service 16.0" (405 mm) 3T-8584 Y Y N NModerate Service 18.0" (460 mm) 3T-8597 Y Y N NModerate Service 20.0" (510 mm) 3T-8586 Y Y Y N

43

D6N, D6M, D5HD5H TRACK SHOESHYBRID AND SEALED AND LUBRICATED TRACK7.50" (190.5 mm) PITCH – 5/8" BOLT(Cont'd.)

TYPE WIDTHREGULAR SHOEPART NUMBER STD XR XL LGP

Moderate Service 22.0" (560 mm) 8E-9823 N Y Y YModerate Service 23.6" (600 mm) 8E-9821 N Y Y YModerate Service 28.0" (710 mm) 8E-4974 N N N YModerate Service 34.0" (860 mm) 3T-8590 N N N YSelf-Cleaning 34.0" (865 mm) 6T-0253 N N N YQuad (MS) 26.0" (660 mm) 9W-8191 N N Y YQuad (MS) 32.0" (810 mm) 9W-5187 N N Y YDouble Grouser (Trap) 23.6" (600 mm) N Y Y Y

D6N, D6M SystemOne SPROCKETSSOUND REDUCED

(PER SIDE) QUANTITY PART NUMBERSprocket Segment (5 Tooth) 5 252-0546Bolt 25 6V-0937Nut 25 7H-3607Washer 25 2S-5658

D6N, D6M SPROCKETSSystemOne, HEAVY DUTY, RBT, HYBRID, AND SEAL AND LUBRICATED TRACK

(PER SIDE) QUANTITY PART NUMBERSprocket Segment (5 Tooth) 5 6I-8077Bolt 25 6V-0937Nut 25 7H-3607Washer 25 2S-5658

D6M/N GENERAL DUTY SPROCKETS SEGMENTS(Per Machine) QUANTITY PART NUMBERSprocket (25 Tooth) 10 397-9556Bolt ¾” 50 6V-0937Nut 50 7H-3607Washer 50 2S-5658

D5H SPROCKETSHEAVY DUTY, RBT, SystemOne, HYBRID, AND SEALED AND LUBRICATED TRACK

(PER SIDE) QUANTITY PART NUMBERSprocket Segment (5 Tooth) 3 106-1622Sprocket Segment (4 Tooth) 2 106-1624

44

D6N, D6M, D5HD5H SPROCKETSHEAVY DUTY, RBT, SystemOne, HYBRID, AND SEALED AND LUBRICATED TRACK(Cont'd.)(PER SIDE) QUANTITY PART NUMBERBolt 23 6V-0937Nut 23 7H-3607Washer 23 2S-5658

D6N, D6M, D5H SystemOne CENTER TREAD IDLERXL, LGP

(PER MACHINE) QUANTITY PART NUMBERGroup 4 290-0737

Components of GroupIdler Assembly 1 290-0738- Bearing (35) 2 9P-1360Shaft 1 161-7350Collar 2 160-9756Retainer 2 161-7550Thrust Washer (36) 1 110-3362Bolt 12 9X-8271Washer 12 9X-2327Seal – Duo-Cone Group (Symmetric) 2 161-7247- Toric Ring (35) 2 161-7249Seal – Collar 2 5K-0216Seal – Retainer 2 1H-8128Stopper 1 3T-9536Plug 1 6Y-0473

D6N, D6M, D5H SystemOne RELIEVED TREAD IDLERXL, LGPGHS, MLW

QUANTITY PART NUMBERGroup 4 323-1168

Components of GroupIdler Assembly 1 323-1169 (37)

- Bearing (35) 2 9P-1360Shaft 1 161-7350Collar 2 160-9756Retainer 2 161-7550

35 Component of preceding assembly or group; quantity shown is quantity per assembly or group.36 Use (1) 9G-9351 Thrust Washer and (4) 1L-5072 Dowels to repair former 6T-3283 Retainer Assembly. Use (1) 9W-2423 Thrust Washer and

(4) 2H-1190 Dowels to repair former 9G-9350 Retainer Assembly. DO NOT DRILL AND DOWEL NEW 110-3362 and 106-7691 Thrust Wash-er. See Special Instruction SEHS8515.

37 Serviced by 323-1168

45

D6N, D6M, D5HD6N, D6M, D5H SystemOne RELIEVED TREAD IDLERXL, LGPGHS, MLW(Cont'd.)

QUANTITY PART NUMBERGroup 4 323-1168Thrust Washer (38) 1 110-3362Bolt 12 9X-8271Washer 12 9X-2327Seal – Duo-Cone Group (Symmetric) 2 161-7247- Toric Ring (39) 2 161-7249Seal – Collar 2 5K-0216Seal – Retainer 2 1H-8128Stopper 1 3T-9536Plug 1 6Y-0473

D6N (XL & LGP) SystemOne LANDFILL/SPECIAL APPLICATION RELIEVED TREAD IDLERQUANTITY PART NUMBER

Group 4 339-7803 (40)


- Bearing (39) 2 9P-1360Shaft 1 161-7350Collar 2 189-2170Ring 2 189-2165Seal 2 189-2171Retainer 2 189-2164Thrust Washer (38) 2 110-3362Bolt 12 261-9436Washer 12 9X-2327Seal – Duo-Cone Group (Symmetric Seal) 2 161-7247- Toric Ring (39) 2 161-7249Seal – Retainer 2 1H-8128Seal – Collar 2 5K-0216Stopper 1 3T-9536Plug 1 6Y-0473

38 Use (1) 9G-9351 Thrust Washer and (4) 1L-5072 Dowels to repair former 6T-3283 Retainer Assembly. Use (1) 9W-2423 Thrust Washer and(4) 2H-1190 Dowels to repair former 9G-9350 Retainer Assembly. DO NOT DRILL AND DOWEL NEW 110-3362 and 106-7691 Thrust Wash-er. See Special Instruction SEHS8515.

39 Component of preceding assembly or group; quantity shown is quantity per assembly or group.40 See Special Instructions REHS5304 for information regarding modification of idler guards/scrapers on existing machines.41 Serviced by 339-7803

46

D6N, D6M, D5HD6N, D6M, D5H IDLERS

CURRENT DESIGN - SYMMETRIC SEALS (STD, XL, LGP)INCREASED TREAD WEAR LIFE


Components of GroupIdler Assembly 1 190-1547- Bearing (42) 2 9P-1360Shaft 1 161-7350Collar 2 160-9756RingSealRetainer 2 161-7550Thrust Washer (43) 1 110-3362Bolt 12 053-2294Washer 12 5M-2894Seal – Duo-Cone Group (Symmetric) 2 161-7247- Toric Ring (42) 2 161-7249Seal – Collar 2 5K-0216Seal – Retainer 2 1H-8128Stopper 1 3T-9536Plug 1 6Y-0473Mounting Hardware (D6N, D6M) (End Cap and Block with Bolt Hole Centerline 88 mm)End Cap (Front & Rear LH) 1 233-0372

End Cap (Front & Rear RH) 1 233-0368

Block (Front LH) 1 254-3928Block (Front RH) 1 254-3927Block (Rear LH) 1 239-8091Block (Front RH) 1 239-8090Bolt (Front) (16 mm) 4 8T-0359Bolt (Rear) (16 mm) 4 8T-0282Washer 4 5P-8247Shim (Front Idlers Only) 4 254-3929Mounting Hardware (D6N, D6M) (End Cap and Block with Bolt Hole Centerline 75 mm) (44)

End Cap 2 108-1138Block 2 108-1136Bolt (16 mm) 4 8T-0282Washer 4 5P-8247Shim (Front Idlers Only) 4 3W-2301Mounting Hardware (D5H) (End Cap and Block with Bolt Hole Centerline 75 mm) (44)



44 These components are not included in the idler group; quantities shown are required to mount each idler.

47

D6N, D6M, D5HD6N, D6M, D5H IDLERSCURRENT DESIGN - SYMMETRIC SEALS (STD, XL, LGP)INCREASED TREAD WEAR LIFE(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERGroup 4 190-1546

End Cap 2 9N-4683Block 2 9N-4680Bolt (5/8") 4 1A-8651Washer 4 5P-8247Shim (Front Idlers Only) 4 3W-2301

D6M/N GENERAL DUTY IDLERSXL/LGP

(PER MACHINE) QUANTITY PART NUMBERIdler Group 4 396-4170

D6N, D6M XL, LGP SystemOne CENTER TREAD IDLER HARDWAREFACTORY BUILT MACHINES

(PER MACHINE) QUANTITY PART NUMBERBlock (Front LH) 2 254-3928Block (Front RH) 2 254-3927Block (Rear LH) 2 283-5752Block (Rear RH) 2 283-5748End Cap (Abutment Style) (Front LH) 2 233-0372End Cap (Abutment Style) (Front RH) 2 233-0368End Cap (Abutment Style) (Rear LH) 2 283-5750End Cap (Abutment Style) (Rear RH) 2 283-5746Shim - Front (10 mm Thick) 4 254-3929Shim - Rear (5 mm Thick) 4 283-5753Bolt-Rear (16 mm x 135 mm) 8 146-5132Bolt-Front (16 mm x 130 mm) 8 8T-0359Washer (16 mm) 16 5P-8247Plate (Bolt to Front and Rear Yoke Assemblies) 8 248-3971Scraper 8 248-3972Bolt (12 mm) 8 8T-4910Bolt (12 mm) 24 8T-4183Washer (12 mm) 32 7D-1649Scraper (Bolt to End Guiding Guard) 8 271-6093Bolt (12 mm) 24 8T-4194Washer (12 mm) 24 198-4778

48

D6N, D6M, D5HD6N, D6M, D5H, XL/LGP SystemOne CENTER TREAD IDLER HARDWARE ARRANGEMENT

RETROFIT KIT(PER MACHINE) QUANTITY PART NUMBERHardware Idler Arrangement (Includes hardware for 4 idler groups) 1 246-5714 (45)

Components of Idler Hardware ArrangementBlock (Front LH) 2 254-3928Block (Front RH) 2 254-3927Block (Rear LH) 2 283-5752Block (Rear RH) 2 283-5748End Cap (Abutment Style) (Front LH) 2 233-0372End Cap (Abutment Style) (Front RH) 2 233-0368End Cap (Abutment Style) (Rear LH) 2 283-5750End Cap (Abutment Style) (Rear RH) 2 283-5746Shim - Front (10 mm Thick) 4 254-3929Shim - Rear (5 mm Thick) 4 283-5753Bolt-Rear (16 mm x 135 mm) (D6N, D6M) 8 146-5132Bolt-Front (16 mm x 130 mm) (D6N, D6M) 8 8T-0359Bolt (5/8" x 135 mm) (D5H) 16 7X-0357 (46)

Washer (16 mm) 16 5P-8247Plate (Weld to End Guiding Guards) 8 271-6094Scraper 8 271-6095Bolt (12 mm) 24 8T-4956Washer (12 mm) 24 5P-1076Plate- Scraper Base (Front Track Roller Frame) 2 234-4319Plate- Scraper Base (Rear Track Roller Frame) 2 246-4341Side Scraper 8 238-0452Tread Scraper-Front 2 238-0453Scraper Bolt (12 mm) 28 8T-4139Scraper Washer (12 mm) 28 5P-1076

D6N (XL& LGP) SystemOne RELIEVED TREAD IDLER MOUNTING HARDWARE – RETROFITXL & LGP

D6N XL: ALH1-UP, AKM1-UP D6N XL III: DJA1-UP D6N LGP: ALY1-UP, ALR1-UP D6N LGP III: DJY1-UP

QUANTITY PART NUMBERComponents of Idler Hardware Arrangement (47)

Block (Front LH) 2 283-5752Block (Front RH) 2 283-5748End Cap (Abutment Style) (Front LH) 2 283-5750

45 This arrangement contains all the components needed to provide proper guarding on D6N/M SystemOne Center Tread Idler Groups. Thisarrangement can also be used on D5H machines and the only difference is the bolts (5/8") to mount the cap assembly and blocks to thetrack roller frame. These bolt are not included in the arrangement and must be ordered separately.

46 Not included in Hardware Idler Arrangement.47 Components include the caps/blocks and hardware to mount idlers. The scrapers and guards will need to be modified. Please refer to

REHS5304.

49

D6N, D6M, D5HD6N (XL& LGP) SystemOne RELIEVED TREAD IDLER MOUNTING HARDWARE – RETROFITXL & LGPD6N XL: ALH1-UP, AKM1-UP D6N XL III: DJA1-UP D6N LGP: ALY1-UP, ALR1-UP D6N LGP III: DJY1-UP(Cont'd.)

QUANTITY PART NUMBEREnd Cap (Abutment Style) (Front RH) 2 283-5746Shim - Front (12 mm Thick) 4 233-0375Bolt-Front (16 mm x 140 mm) (D6N, D6M) 8 9X-8916Block (Rear LH) 2 283-5752Block (Rear RH) 2 283-5748End Cap (Abutment Style) (Rear LH) 2 283-5750End Cap (Abutment Style) (Rear RH) 2 283-5746Shim - Rear (12 mm Thick) 4 233-0375Bolt-Rear (16 mm x 140 mm) (D6N, D6M) 8 9X-8916Washer (16 mm) 16 5P-8247

D6N (LGP FINE GRADER) SystemOne RELIEVED TREAD IDLER MOUNTING HARDWARE –RETROFITLGP Fine Grader

D6N LGP Fine Grader: ALY2454-UP, ALR0785-UP D6N LGP III Fine Grader: DJY1-UP

QUANTITY PART NUMBERComponents of Idler Hardware Arrangement (48)

Front Extension Block As. 4 339-2908Shim - Front (12 mm Thick) 4 254-4433Long, Middle Bolt (16 mm x 190 mm) 4 7Y-5227Short, Rear Bolt (16 mm x 90 mm) 4 8T-4175Intermediate, Front Bolt (16 mm x 130 mm) 4 8T-0359Washer (16 mm) 8 9X-8268Cap As. Front 4 108-1138Block (Front) 4 110-6124Block (Rear LH) 2 283-5752Block (Rear RH) 2 283-5748End Cap (Abutment Style) (Rear LH) 2 283-5750End Cap (Abutment Style) (Rear RH) 2 283-5746Bolt-Rear (16 mm x 140 mm) (D6N, D6M) 8 9X-8916Shim - Rear (12 mm Thick) 4 233-0375Washer (16 mm) 16 5P-8247

48 Components include the caps/blocks and hardware to mount idlers. The scrapers and guards will need to be modified. Please refer toREHS5304.

50

D6N, D6M, D5HD6N (XL & LGP) LANDFILL/SPECIAL APPLICATION CENTER TREAD IDLER


Components of GroupIdler Assembly 1 190-1547Bearing 2 9P-1360Shaft 1 161-7350Collar 2 189-2170Ring 2 189-2165Seal 2 189-2171Retainer 2 189-2164Thrust Washer 2 110-3362Bolt 12 3S-1307Washer 12 8T-4896Seal -Duo-Cone Group 2 161-7247Toric Ring 2 161-7249Seal - Retainer 1H-8128Seal - Collar 5K-0216Stopper 1 3T-9536Plug 1 6Y-0473

D6M, D5H IDLERSFORMER DESIGN (STD, XL, LGP)

(PER MACHINE) QUANTITY PART NUMBERGroup 4 –

Components of GroupIdler Assembly 1 190-1547- Bearing (49) 2 9P-1360Shaft 1 6T-3285Retainer 2 6T-3284Thrust Washer (50) 1 110-3362Bolt 12 053-2294 (51)

Washer 12 5M-2894Stabilizer Ring 2 7T-4030Seal – Duo-Cone Group 2 7T-4080- Toric Ring (49) 1 8P-7003- O-Ring (49) 1 6V-2699Seal – Retainer 2 1H-8128Stopper 1 3T-9536



51 Use 0S-1594 bolt with former idler assembly 6T-1763

51

D6N, D6M, D5HD6M, D5H IDLERSFORMER DESIGN (STD, XL, LGP)(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERGroup 4 –

Plug 1 6Y-0473Mounting Hardware (D5H) (52)

End Cap 2 9N-4683Block 2 9N-4680Bolt 4 1A-8651Washer 4 5P-8247Shim (Front Idlers Only) 4 3W-2301Mounting Hardware (D6M) (52)

End Cap 2 108-1138Block 2 108-1136Bolt 4 8T-0282Washer 4 5P-8247Shim (Front Idlers Only) 4 3W-2301Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 7T-4086- Toric Ring (53) 1 7T-4087- O-Ring (53) 1 6V-2699

D6N, D6M, D5H HEAVY DUTY, HYBRID, GENERAL DUTY AND SystemOne CARRIER ROLLER(PER MACHINE) QUANTITY PART NUMBERCarrier Roller Group 2 229-5446

D6N, D6M SystemOne TRACK ROLLERS(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) Roller Group - (54) 240-9557

Mounting Hardware (D6N, D6M) (55)


52 These components are not included in the idler group; quantities shown are required to mount each idler.53 Component of preceding assembly or group; quantity shown is quantity per assembly or group.54 14 required for XL machines; 16 required for LGP machines.55 These components are not included in the roller group; quantities shown are required to mount each roller.

52

D6N, D6M, D5HD5H XL/LGP SystemOne TRACK ROLLERS

(PER MACHINE) PART NUMBER XL LGPSingle Flange (SF) Roller Group 240-9557 14 16

Mounting Hardware (56)

Cap 223-9110 2 2Cap - Offset (57) 262-7248 2 –

Cap Offset (57) 262-7249 2 –

Bolt (5/8") 1D-4585 4 4Washer 9H-1024 4 4

D6N, D6M, D5H TRACK ROLLERSCURRENT DESIGN (END COLLARS, SYMMETRIC SEALS)

(PER MACHINE) QUANTITY PART NUMBERRoller Group (DF) / Machine 6 (58) 310-4915

Roller Group (SF) / Machine 8 310-4912

Roller Group (DF, Tall Flange) - (59) 310-4918

Mounting Hardware (D6N, D6M) (56)

Cap 2 223-9110Bolt (16 mm) 4 8T-0281Washer (16 mm) 4 5P-8247Mounting Hardware (D5H) (56)

Cap 2 223-9110Bolt (5/8") 4 1B-4367Washer (5/8") 4 5P-8247

D6M/N GENERAL DUTY ROLLERS WITH END CAPSQTY PER MACHINE PART NUMBER

Single Flange Roller 8 417-3770Double Flange Roller (60) 6 416-7050Roller Hardware (D6M/N) (56)

Cap (61) 2 223-9110Bolt - HEX Head M16 4 8T-0281Washer 4 5P-8247

56 These components are not included in the roller group; quantities shown are required to mount each roller.57 Use at roller position 1,2,6,7 to allow clearance between the roller groups.58 8 double flange rollers required for LGP machines.59 Optional double flange roller for guiding; use quantity required for specific roller frame type.60 8 - DF rollers for LGP, 6 - DF rollers for XL machines.61 Caps only required if machine had old style rollers.

53

D6N, D6M, D5HD5H TRACK ROLLERS

FORMER DESIGN (BOLT-ON RETAINER)

(PER MACHINE) QUANTITY PART NUMBERDouble Flange (DF) 4 (62) –

Single Flange (SF) 8 –

Components of GroupRoller Shell (DF) 1 9P-1362Roller Shell (SF) 1 9P-1367- Bearing (63) 2 9P-1360Shaft 1 3T-9875Retainer Assembly 2 3T-9877Thrust Washer (64) 1 9G-9351Dowel (64) 4 1L-5072Bolt 12 0S-1594Washer 12 5M-2894Stabilizer Ring 2 7T-4030Seal – Duo-Cone Group 2 7T-4080- Toric Ring (63) 1 8P-7003- O-Ring (63) 1 6V-2699Seal – Retainer 2 5H-6734Stopper 1 7G-4332Plug 1 6Y-0473Mounting Hardware (65)

End Cap (5/8") 2 8E-0281Bolt (5/8") 4 1B-4367Washer (5/8") 4 5P-8247Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 7T-4086- Toric Ring (63) 1 7T-4087- O-Ring (63) 1 6V-2699

D6N, D6M, XL/LGP SystemOne END GUIDING GUARDS(PER MACHINE) QUANTITY PART NUMBERFrontGuard Assembly 2 106-4370Guard Assembly 2 106-4371Wear Strip 4 271-6079Bolt (12 mm) 12 8T-4139Washer 12 8T-4223

62 8 double flange rollers required for LGP machines.63 Component of preceding assembly or group; quantity shown is quantity per assembly or group.64 These components are only to repair retainer assembly. See Special Instruction SEHS8515.65 These components are not included in the roller group; quantities shown are required to mount each roller.

54

D6N, D6M, D5HD6N, D6M, XL/LGP SystemOne END GUIDING GUARDS (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERRearGuard Assembly 2 109-3229Guard Assembly 2 109-3230Wear Strip 4 271-6079Bolt (12 mm) 12 8T-4139Washer 12 8T-4223

D5H XL/LGP SystemOne END GUIDING GUARDSLevel One Guiding

(Per Machine) QUANTITY PART NUMBERWear Strip 8 271-6079Bolt (12 mm) 24 8T-4139Washer 24 8T-4223

D6N/M LGP, D6N/M XL END GUIDING GUARDSMETRIC MOUNTING HARDWARE


D5H, D5H LGP, D5H XL END GUIDING GUARDSSEALED AND LUBRICATED, HEAVY DUTY, AND ROTATING BUSHING TRACK ONLY (INCH MOUNTING HARDWARE)

(PER MACHINE) QUANTITY PART NUMBERFrontGuard Assembly 2 106-4370Guard Assembly 2 106-4371Bolt 12 5P-2228Washer 12 8T-4223Strip 2 8Y-1198 (66)

66 Former curved strip use 8E-5399 (Ref service magazine, dated Feb 11,91).

55

D6N, D6M, D5HD5H, D5H LGP, D5H XL END GUIDING GUARDSSEALED AND LUBRICATED, HEAVY DUTY, AND ROTATING BUSHING TRACK ONLY (INCH MOUNTING HARDWARE)(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERStrip 2 8Y-1199 (67)

Spacer (68) 4 106-4402RearGuard Assembly 2 106-4372Guard Assembly 2 106-4373Bolt 12 5P-2228Washer 12 8T-4223Strip 2 8Y-1198 (69)

Strip 2 8Y-1199 (67)

Spacer (68) 4 106-4402

D6N, D6M XL SystemOne TRACK ROLLER GUARDS (FULL LENGTH)METRIC HARDWARE

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 261-2044Tube 12 205-6141Bolt 12 110-6969Washer 24 9X-8257Nut- Self Locking 12 8T-4778Bolt 24 8T-4140Spacer 24 204-6365

D6N, D6M LGP SystemOne TRACK ROLLER GUARDS (FULL LENGTH)METRIC HARDWARE

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly (RH) 2 261-2046Guard Assembly (LH) 2 261-2047Tube 12 205-6141Bolt 12 110-6969Washer 24 9X-8257Nut- Self Locking 12 8T-4778Bolt 28 8T-4140Spacer 28 204-6365

67 Former curved strip use 8E-5400 (Ref service magazine, dated Feb 11,91).68 Required for Sealed & Lubricated Track.69 Former curved strip use 8E-5399 (Ref service magazine, dated Feb 11,91).

56

D6N, D6M, D5HD5H XL SystemOne TRACK ROLLER GUARDS (FULL LENGTH)

LEVEL THREE GUIDING INCH HARDWARE(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 261-2044Tube 12 205-6141Bolt 12 110-6969Washer 24 9X-8257Nut- Self Locking 12 8T-4778Bolt (5/8") 24 7X-0347Spacer 24 204-6365

D5H LGP SystemOne TRACK ROLLER GUARDS (FULL LENGTH)LEVEL THREE GUIDING INCH HARDWARE

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly (RH) 2 261-2046Guard Assembly (LH) 2 261-2047Tube 12 205-6141Bolt 12 110-6969Washer 24 9X-8257Nut- Self Locking 12 8T-4778Bolt (5/8") 28 7X-0347Spacer 28 204-6365

D6M XL TRACK ROLLER GUARDS (FULL LENGTH)METRIC MOUNTING HARDWARE

(PER MACHINE) QUANTITY PART NUMBERGuard 2 145-7135Guard 2 145-7134Spacer (Mounting) 24 8G-5258Bolt - Mounting (16 mm) 24 8T-4140Tube 8 4S-6559Bolt - Cross-Tube (16 mm) 8 110-6969Washer 16 9X-8257Nut (16 mm) 8 8T-4778Plate 4 108-0809Bolt (12 mm) 8 8T-4192Bolt (12 mm) 8 8T-4139Washer 16 8T-4223

D6M LGP TRACK ROLLER GUARDS (FULL LENGTH)METRIC MOUNTING HARDWARE

(PER MACHINE) QUANTITY PART NUMBERGuard 2 145-7133Guard 2 145-7132

57

D6N, D6M, D5HD6M LGP TRACK ROLLER GUARDS (FULL LENGTH)METRIC MOUNTING HARDWARE(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERSpacer (Mounting) 28 8G-5258Bolt - Mounting (16 mm) 28 8T-4140Tube 10 4S-6559Bolt - Cross-Tube (16 mm) 10 110-6969Washer 20 9X-8257Nut (16 mm) 10 8T-4778Plate 4 108-0809Bolt (12 mm) 8 8T-4192Bolt (12 mm) 8 8T-4139Washer 16 8T-4223

D5H XL TRACK ROLLER GUARDS (FULL LENGTH)HEAVY DUTY AND ROTATING BUSHING TRACK ONLY (INCH MOUNTING HARDWARE)

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 106-9563Guard Assembly 2 106-9564Tube 8 4S-6559Bolt 8 5P-7971Bolt 8 5P-2228Bolt 24 7X-0347Bolt 8 8T-8917Washer 16 8T-4223Washer 16 5P-8247Nut 8 3K-2889Plate 4 108-0809Spacer 24 8G-5258

D5H LGP TRACK ROLLER GUARDS (FULL LENGTH)HEAVY DUTY AND ROTATING BUSHING TRACK ONLY (INCH MOUNTING HARDWARE)

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 107-5715Guard Assembly 2 107-5716Tube 10 4S-6559Bolt 10 5P-7971Bolt 8 5P-2228Bolt 28 7X-0347Bolt 8 8T-8917Washer 16 8T-4223Washer 20 5P-8247Nut 10 3K-2889

58

D6N, D6M, D5HD5H LGP TRACK ROLLER GUARDS (FULL LENGTH)HEAVY DUTY AND ROTATING BUSHING TRACK ONLY (INCH MOUNTING HARDWARE)(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERPlate 4 108-0809Spacer 28 8G-5258

D5H STD TRACK ROLLER GUARDS (FULL LENGTH)SEALED AND LUBRICATED TRACK ONLY (INCH MOUNTING HARDWARE)

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 8Y-1208Guard Assembly 2 8Y-1211Tube 10 4S-6559Bolt 10 5P-7971Bolt 20 7X-0347Bolt 16 8T-8917Washer 16 8T-4223Washer 20 8T-4122Nut 10 3K-2889Plate 4 8E-8783Spacer 20 8G-5258

D5H LGP TRACK ROLLER GUARDS (FULL LENGTH)SEALED AND LUBRICATED TRACK ONLY (INCH MOUNTING HARDWARE)

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 8Y-1254Guard Assembly 2 8Y-1255Tube 10 4S-6559Bolt 10 5P-7971Bolt 32 7X-0347Bolt 16 8T-8917Washer 16 8T-4223Washer 10 5P-8247Nut 10 3K-2889Plate 4 8E-8783Spacer 32 8G-5258

D6N, D6M XL SystemOne CENTER GUIDING GUARDSLEVEL TWO GUIDING, GUARD ASSEMBLY POSITIONED OVER #2 AND #5 ROLLER GROUP


59

D6N, D6M, D5H5H XL SystemOne CENTER GUIDING GUARDS

LEVEL TWO GUIDING GUARD ASSEMBLY POSITIONED OVER #2 AND #5 ROLLER GROUP INCH HARDWARE(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 251-8570Bolt (5/8 Inch) 16 7X-0347Spacer 16 204-6365

D6N, D6M LGP SystemOne CENTER GUIDING GUARDSLEVEL ONE GUIDING, GUARD ASSEMBLY POSITIONED OVER #4 ROLLER GROUP


D6N, D6M LGP SystemOne CENTER GUIDING GUARDSLEVEL TWO GUIDING, GUARD ASSEMBLY POSITIONED OVER #3 AND #6 ROLLER GROUP


D5H LGP SystemOne CENTER GUIDING GUARDSLEVEL ONE GUIDING GUARD ASSEMBLY POSITIONED OVER #4 ROLLER GROUP INCH HARDWARE

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 251-8570Bolt (5/8 Inch) 8 7X-0347Spacer 8 204-6365

D5H LGP SystemOne CENTER GUIDING GUARDSLEVEL TWO GUIDING GUARD ASSEMBLY POSITIONED OVER #3 AND #6 ROLLER GROUP INCH HARDWARE

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 251-8570Bolt (5/8 Inch) 16 7X-0347Spacer 16 204-6365

D6N LGP CENTER GUIDING GUARDS(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 205-6164Bolt (16 mm) 12 8T-4140Spacer 12 204-6365

60

D6N, D6M, D5HD6M XL CENTER GUIDING GUARDS

METRIC MOUNTING HARDWARE(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 108-0812Bolt (16 mm) 8 8T-4140Block 8 178-1096

D6M LGP CENTER GUIDING GUARDSMETRIC MOUNTING HARDWARE

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 107-5721Bolt (16 mm) 12 8T-4140Spacer 12 8G-5258

D5H STD, D5H XL CENTER GUIDING GUARDSHEAVY DUTY AND ROTATING BUSHING TRACK ONLY (INCH MOUNTING HARDWARE)

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 106-9982Bolt 8 7X-0347Spacer 8 8G-5258

D5H LGP CENTER GUIDING GUARDSHEAVY DUTY AND ROTATING BUSHING TRACK ONLY (INCH MOUNTING HARDWARE)


D5H STD, D5H XL CENTER GUIDING GUARDSSEALED AND LUBRICATED TRACK ONLY (INCH MOUNTING HARDWARE)

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 8E-9763Bolt 8 7X-0347Bolt 16 5P-2228Washer 16 8T-4223Strip 4 8G-5335Spacer 8 8G-5258

61

D6N, D6M, D5HD5H LGP CENTER GUIDING GUARDS

SEALED AND LUBRICATED TRACK ONLY (INCH MOUNTING HARDWARE)

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 6Y-3917Bolt 16 7X-0347Bolt 6 5P-7971Bolt 24 5P-2228Washer 24 8T-4223Lock Nut 6 3K-2889Tube 6 4S-6559Strip 4 6Y-3921Spacer 16 8G-5258Washer 6 5P-8247

62

D6T, D6R, D6HD6T, D6R, D6H STD/XL/XW/IG/LGP SystemOne™ TRACK

PRESS FIT MASTERD6T/R/H STD (39 SECTION): 4RC5653-UP, 2KD5500-UP, 3ED5500-UP, 3ZF5954-UP, 4YF5500-UP, 6CF5556-UP, 4LG5596-UP, 1FJ5542-UP,2YN1-UP, 2HM1-UP, 6FR1-UP, 3ZN1-UP, 4FM1-UP, 5PR1-UP, AFM1-UP, AEM1-UP, BPM1-UP, BRJ1-UP, BLT1-UP, BLE1-UP, BNL1-UP,

BMK1-UP, HCD1-UP, GMT1-UP, TCB1-UP, JEK1-UP, JHB1-UP, SMC1-UP, PEZ1-UP, DHL1-UPD6T/R/H XL, XW, IG (41 SECTION): 8ZJ321-UP, 9KJ621-UP, 9LK458-UP, 8SK5500-UP, 9RK5500-UP, 4MN1-UP, 4JR1-UP, 4WR1-UP, 6MR1-UP, 5LN1-UP, 9BM1-UP, 5RR1-UP, 7GR1-UP, AEP1-UP, AAX1-UP, AGM1-UP, FDT1-UP, CAD1-UP, DAE1-UP, BMY1-UP, BMJ1-UP, BRE1-UP, BRZ1-UP, BPS1-UP, GJB1-UP,JDL1-UP,LFM1-UP, EXL1-UP, LAY1-UP, GCT1-UP, LAE1-UP, KLM1-UP, HKE1-UP, RFC1-UP, WFH1-UP,

ZEB1-UP, MRT1-UP, DPS1-UP, SKL1-UP, LBD1-UP, RAY1-UP, HDC1-UP, MTJ1-UP, DJG1-UP, RLW1-UPD6T/R/H LGP (45 SECTION): 6FC4092-UP, 8FC5500-UP, 1KD5500-UP, 5HF4276-UP, 2TG4093-UP, 3YG4290-UP, 4GG5500-UP, 8LN1-UP,4HN1-UP, 7AR1-UP, 9PN1-UP, 8TM1-UP, 4TR1-UP, 6GR1-UP, ADE1-UP, ACJ1-UP, BNC1-UP, AFD1-UP, BPZ1-UP, BPP1-UP, WRG1-UP,

DMK1-UP, LGP1-UP, KJL1-UP, LKJ1-UP, SNK1-UP, WCB1-UP, DLM1-UP, WCG1-UP, JWD1-UP8.00" (203.2 mm) PITCH – 22 mm BOLT

PART NUMBERSTD 39Section

XL/XW/IG 41Section

LGP 45Section

Link Assembly – (Quantity 2) 234-9672 (1) 351-0958 351-0957Components of Link AssemblyLink Box Standard 351-0955 (2) 18 19 21Link Box Offset 351-0956 (3) 1 1 1Standard Link 234-9699 36 38 42Standard Link (Press Fit) (4) 234-9699 2 2 2Track Hardware (4)

Bolt (M22) 6Y-9024 156 164 180Nut 9W-4381 156 164 180

D6T, D6R, D6H STD/XL/XW/IG/LGP SystemOne™ TRACKCLAMP MASTER

D6T/R/H STD (39 SECTION): 4RC5653-UP, 2KD5500-UP, 3ED5500-UP, 3ZF5954-UP, 4YF5500-UP, 6CF5556-UP, 4LG5596-UP, 1FJ5542-UP,2YN1-UP, 2HM1-UP, 6FR1-UP, 3ZN1-UP, 4FM1-UP, 5PR1-UP, AFM1-UP, AEM1-UP, BPM1-UP, BRJ1-UP, BLT1-UP, BLE1-UP, BNL1-UP,

BMK1-UP, HCD1-UP, GMT1-UP, TCB1-UP, JEK1-UP, JHB1-UP, SMC1-UP, PEZ1-UP, DHL1-UPD6T/R/H XL, XW, IG (41 SECTION): 8ZJ321-UP, 9KJ621-UP, 9LK458-UP, 8SK5500-UP, 9RK5500-UP, 4MN1-UP, 4JR1-UP, 4WR1-UP, 6MR1-UP, 5LN1-UP, 9BM1-UP, 5RR1-UP, 7GR1-UP, AEP1-UP, AAX1-UP, AGM1-UP, FDT1-UP, CAD1-UP, DAE1-UP, BMY1-UP, BMJ1-UP, BRE1-UP, BRZ1-UP, BPS1-UP, GJB1-UP,JDL1-UP,LFM1-UP, EXL1-UP, LAY1-UP, GCT1-UP, LAE1-UP, KLM1-UP, HKE1-UP, RFC1-UP, WFH1-UP,

ZEB1-UP, MRT1-UP, DPS1-UP, SKL1-UP, LBD1-UP, RAY1-UP, HDC1-UP, MTJ1-UP, DJG1-UP, RLW1-UPD6T/R/H LGP (45 SECTION): 6FC4092-UP, 8FC5500-UP, 1KD5500-UP, 5HF4276-UP, 2TG4093-UP, 3YG4290-UP, 4GG5500-UP, 8LN1-UP,4HN1-UP, 7AR1-UP, 9PN1-UP, 8TM1-UP, 4TR1-UP, 6GR1-UP, ADE1-UP, ACJ1-UP, BNC1-UP, AFD1-UP, BPZ1-UP, BPP1-UP, WRG1-UP,

DMK1-UP, LGP1-UP, KJL1-UP, LKJ1-UP, SNK1-UP, WCB1-UP, DLM1-UP, WCG1-UP, JWD1-UP8.00" (203.2 mm) PITCH – 22 mm BOLT


XL/XW/IG 41Section

LGP 45Section

Link Assembly – 45 Section 234-9672 (1) 351-0958 351-0957Components of Link AssemblyLink Box Standard 351-0955 (2) 18 19 21Link Box Offset 351-0956 (3) 1 1 1Standard Link 234-9699 36 38 42Clamp Master Link (4) 318-1064 2 2 2Track Hardware (4)

Bolt (M22) 6Y-9024 152 160 176

1 Contains Standard Link Box 234-9679 and Offset Link Box 234-9681.2 Link Box Standard that is greater than 40% worn should be replaced with part number 351-0963.3 Link Box Offset that is greater than 40% worn should be replaced with part number 351-0964.4 Not part of link assembly; required to assemble track group.

63

D6T, D6R, D6HD6T, D6R, D6H STD/XL/XW/IG/LGP SystemOne™ TRACKCLAMP MASTERD6T/R/H STD (39 SECTION): 4RC5653-UP, 2KD5500-UP, 3ED5500-UP, 3ZF5954-UP, 4YF5500-UP, 6CF5556-UP, 4LG5596-UP, 1FJ5542-UP,2YN1-UP, 2HM1-UP, 6FR1-UP, 3ZN1-UP, 4FM1-UP, 5PR1-UP, AFM1-UP, AEM1-UP, BPM1-UP, BRJ1-UP, BLT1-UP, BLE1-UP, BNL1-UP,BMK1-UP, HCD1-UP, GMT1-UP, TCB1-UP, JEK1-UP, JHB1-UP, SMC1-UP, PEZ1-UP, DHL1-UPD6T/R/H XL, XW, IG (41 SECTION): 8ZJ321-UP, 9KJ621-UP, 9LK458-UP, 8SK5500-UP, 9RK5500-UP, 4MN1-UP, 4JR1-UP, 4WR1-UP, 6MR1-UP, 5LN1-UP, 9BM1-UP, 5RR1-UP, 7GR1-UP, AEP1-UP, AAX1-UP, AGM1-UP, FDT1-UP, CAD1-UP, DAE1-UP, BMY1-UP, BMJ1-UP, BRE1-UP, BRZ1-UP, BPS1-UP, GJB1-UP,JDL1-UP,LFM1-UP, EXL1-UP, LAY1-UP, GCT1-UP, LAE1-UP, KLM1-UP, HKE1-UP, RFC1-UP, WFH1-UP,ZEB1-UP, MRT1-UP, DPS1-UP, SKL1-UP, LBD1-UP, RAY1-UP, HDC1-UP, MTJ1-UP, DJG1-UP, RLW1-UPD6T/R/H LGP (45 SECTION): 6FC4092-UP, 8FC5500-UP, 1KD5500-UP, 5HF4276-UP, 2TG4093-UP, 3YG4290-UP, 4GG5500-UP, 8LN1-UP,4HN1-UP, 7AR1-UP, 9PN1-UP, 8TM1-UP, 4TR1-UP, 6GR1-UP, ADE1-UP, ACJ1-UP, BNC1-UP, AFD1-UP, BPZ1-UP, BPP1-UP, WRG1-UP,DMK1-UP, LGP1-UP, KJL1-UP, LKJ1-UP, SNK1-UP, WCB1-UP, DLM1-UP, WCG1-UP, JWD1-UP8.00" (203.2 mm) PITCH – 22 mm BOLT(Cont'd.)


XL/XW/IG 41Section

LGP 45Section

Link Assembly – 45 Section 234-9672 (5) 351-0958 351-0957Nut 9W-4381 152 160 176Track Master Bolt (M22) 254-0224 4 4 4

D6T/D6R/D6H XL/XW SystemOne MADE TO ORDER (MTO) CLAMP MASTER TRACKGROUPS

TRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIESQUANTITY PART NUMBER

Link Assembly Used 351-0958Extreme Service Shoe – 22" (560 mm) 2 385-2666

D6T/D6R/D6H XW SystemOne MADE TO ORDER (MTO) CLAMP MASTER TRACK GROUPSTRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIES

QUANTITY PART NUMBERLink Assembly Used 351-0958Extreme Service Shoe – 30" (760 mm) 2 385-5454

D6T/D6R/D6H LGP SystemOne MADE TO ORDER (MTO) CLAMP MASTER TRACK GROUPSTRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIES

QUANTITY PART NUMBERLink Assembly Used 351-0957Extreme Service Shoe – 36" (915 mm) 2 385-7740Extreme Service RH Offset Shoe - 31" (790 mm) 1 385-7749Extreme Service LH Offset Shoe - 31" (790 mm) 1 385-7750

5 Contains Standard Link Box 234-9679 and Offset Link Box 234-9681.

64

D6T, D6R, D6HD6T D6R D6H STD/XR/XL/XW/LGP HEAVY DUTY SEALED AND LUBRICATED TRACK*

D6T/R/H STD (39 SECTION): 4RC5653-UP, 2KD5500-UP, 3ED5500-UP, 3ZF5954-UP, 4YF5500-UP, 6CF5556-UP, 4LG5596-UP, 1FJ5542-UP,2YN1-UP, 2HM1-UP, 6FR1-UP, 3ZN1-UP, 4FM1-UP, 5PR1-UP, AFM1-UP, AEM1-UP, BPM1-UP, BRJ1-UP, BLT1-UP, BLE1-UP, BNL1-UP,

BMK1-UP, HCD1-UP, GMT1-UP, TCB1-UP, JEK1-UP, JHB1-UP, SMC1-UP, PEZ1-UP, DHL1-UPD6R/H XR (40 SECTION): 5KK340-UP, 6CK381-UP, 7ZK5500-UP, 1YL320-UP, 2BL346-UP, 2TL5500-UP, 7KN1-UP, 9MN1-UP, 7DR1-UP, 6JN1-

UP, 8XN1-UP, 6HR1-UP, 7CR1-UPD6T/R/H XL, XW (41 SECTION): 8ZJ321-UP, 9KJ621-UP, 9LK458-UP, 8SK5500-UP, 9RK5500-UP, 4MN1-UP, 4JR1-UP, 4WR1-UP, 6MR1-UP,5LN1-UP, 9BM1-UP, 5RR1-UP, 7GR1-UP, AEP1-UP, AAX1-UP, AGM1-UP, FDT1-UP, CAD1-UP, DAE1-UP, BMY1-UP, BMJ1-UP, BRE1-UP,BRZ1-UP, BPS1-UP, GJB1-UP,JDL1-UP,LFM1-UP, EXL1-UP, LAY1-UP, GCT1-UP, LAE1-UP, KLM1-UP, HKE1-UP, RFC1-UP, WFH1-UP, ZEB1-

UP, MRT1-UP, DPS1-UP, SKL1-UP, LBD1-UP, RAY1-UP, HDC1-UP, MTJ1-UP, DJG1-UP, RLW1-UPD6T/R/H LGP (45 SECTION): 6FC4092-UP, 8FC5500-UP, 1KD5500-UP, 5HF4276-UP, 2TG4093-UP, 3YG4290-UP, 4GG5500-UP, 8LN1-UP,4HN1-UP, 7AR1-UP, 9PN1-UP, 8TM1-UP, 4TR1-UP, 6GR1-UP, ADE1-UP, ACJ1-UP, BNC1-UP, AFD1-UP, BPZ1-UP, BPP1-UP, WRG1-UP,

DMK1-UP, LGP1-UP, KJL1-UP, LKJ1-UP, SNK1-UP, WCB1-UP, DLM1-UP, WCG1-UP, JWD1-UP8.00" (203.2 mm) PITCH – 3/4" BOLT

PARTNUMBER

STD 39Section

XR 40Section

XL/XW 41Section

LGP 45Section

Link Assembly (Quantity 2) 424-0842 424-0843 424-0844 424-0847Track LinksRH Pin End Master 8E-7407 1 1 1 1LH Pin End Master 8E-7408 1 1 1 1RH Bushing End Master 8E-7409 1 1 1 1LH Bushing End Master 8E-7410 1 1 1 1RH Regular 378-8241 38 39 40 44LH Regular 378-8242 38 39 40 44Other ComponentsPin 160-7820 (5) 39 40 41 45Bushing 8E-7222 39 40 41 45Seal Assembly (Rigid) 207-0544 78 80 82 90Thrust Ring 152-8071 78 80 82 90Stopper 5G-2247 39 40 41 45Plug 6Y-0473 39 40 41 45Track Hardware (6)

Bolt (Grouser Shoe) 6V-1792 152 156 160 176Bolt (Self-Cleaning Shoe) 6T-2162 88Bolt (Self-Cleaning Shoe) 6V-1792 88Nut 1S-1860 152 156 160 176Master Bolt (Grouser Shoe) 9S-1838 4 4 4 4Master Bolt (Self-Cleaning Shoe) 3P-1111 2Master Bolt (Self-Cleaning Shoe) 9S-1838 2Special Sets/GroupsSeal Set (90 Seal Assemblies) 256-9360 1 1 1 1Bushing and Seal Group (39 Sections) 115-2440 1 1 1 1

* When installing Heavy Duty Track on D6H earlier serial number machines, refer to IRM UC92-20 for installation and getting information. Also refer to Special In-struction SEHS9585 for additional guarding information.

5 Former pin 8E-7220 (Use 9G-1642 stopper).6 Not part of link assembly; required to assemble track group.

65

D6T, D6R, D6HD6T/D6R/D6H XL/XW HEAVY DUTY MADE TO ORDER (MTO) TRACK GROUPS


Link Assembly Used 424-0844Moderate Service Shoe – 24" (610 mm) 2 385-2678Extreme Service Shoe – 22" (560 mm) 2 385-2675Extreme Service Shoe – 24" (610 mm) 2 385-2681Moderate Service Shoe - 30" (760 mm) 2 385-5453

D6T/D6R/D6H LGP HEAVY DUTY MADE TO ORDER (MTO) TRACK GROUPSTRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIES

QUANTITY PART NUMBERLink Assembly Used 424-0847Moderate Service Shoe – 36" (915 mm) 2 385-7739Extreme Service Shoe – 36" (915 mm) 2 208-1508

D6H/R/T GENERAL DUTY LINK ASSEMBLIES8.00" (203.2 mm) PITCH – ¾" Bolt

(PER MACHINE QTY.STD 39 SectionPart Number

XL/XW 41 Section PartNumber

LGP 45 SectionPart Number

Link Assembly 2 391-3928 396-9703 391-3925

Utilizes Heavy Duty UC components for repair parts. Reference the D6T D6R D6H STD/XR/XL/XW/LGP HEAVY DUTY SEALED AND LUBRICATED TRACK Section.

D6H/R/T STD GENERAL DUTY TRACK GROUPSLink Assembly Used 391-3928 QUANTITY PART NUMBERModerate Service Shoe –24” (610 mm) 2 391-3927

D6H/R/T XL/XW GENERAL DUTY TRACK GROUPSLink Assembly Used 396-9703 QUANTITY PART NUMBERModerate Service Shoe –24” (610 mm) 2 396-9704Moderate Service Shoe –30” (760 mm) 2 419-4806

D6H/R/T LGP GENERAL DUTY TRACK GROUPSLink Assembly Used 391-3925 QUANTITY PART NUMBERModerate Service Shoe –36” (915 mm) 2 391-3924

D6H/R/T UNDERCARRIAGE ARRANGEMENTS*Machine Configuration QUANTITY PART NUMBERSTD 1 430-5435XL 1 430-5436

66

D6T, D6R, D6HD6H/R/T UNDERCARRIAGE ARRANGEMENTS* (Cont'd.)Machine Configuration QUANTITY PART NUMBERXW 1 430-5437LGP 1 423-9743* Undercarriage Arrangement part numbers allow for quick look up of pricing a complete General Duty Undercarriage. They are not available for purchase. (In-formation purpose only) When the Undercarriage Arrangement PN’s are placed in DBS/ANTARES they will provide a list of PN’s to order. Includes the parts nec-essary to do a complete UC bottom replacement; sprockets and hardware, Carrier Rollers, Bottom Rollers, Idlers, and Track Groups(includes: Links Assemblies,Shoes, and Hardware).

D6R D6H STD/XR/XL/XW/LGP ROTATING BUSHING TRACK*D6R/H STD (39 SECTION): 4RC5653-UP, 2KD5500-UP, 3ED5500-UP, 3ZF5954-UP, 4YF5500-UP, 6CF5556-UP, 4LG5596-UP, 1FJ5542-UP,2YN1-UP, 2HM1-UP, 6FR1-UP, 3ZN1-UP, 4FM1-UP, 5PR1-UP, AFM1-UP, AEM1-UP, BPM1-UP, BRJ1-UP, BLT1-UP, BLE1-UP, BNL1-UP,

BMK1-UPD6R/H XR (40 SECTION): 5KK340-UP, 6CK381-UP, 7ZK5500-UP, 1YL320-UP, 2BL346-UP, 2TL5500-UP, 7KN1-UP, 9MN1-UP, 7DR1-UP, 6JN1-

UP, 8XN1-UP, 6HR1-UP, 7CR1-UPD6R/H XL, XW (41 SECTION): 8ZJ321-UP, 9KJ621-UP, 9LK458-UP, 8SK5500-UP, 9RK5500-UP, 4MN1-UP, 4JR1-UP, 4WR1-UP, 6MR1-UP,5LN1-UP, 9BM1-UP, 5RR1-UP, 7GR1-UP, AEP1-UP, AAX1-UP, AGM1-UP, FDT1-UP, CAD1-UP, DAE1-UP, BMY1-UP, BMJ1-UP, BRE1-UP,

BRZ1-UP, BPS1-UPD6R/H LGP (45 SECTION): 6FC4092-UP, 8FC5500-UP, 1KD5500-UP, 5HF4276-UP, 2TG4093-UP, 3YG4290-UP, 4GG5500-UP, 8LN1-UP, 4HN1-

UP, 7AR1-UP, 9PN1-UP, 8TM1-UP, 4TR1-UP, 6GR1-UP, ADE1-UP, ACJ1-UP, BNC1-UP, AFD1-UP, BPZ1-UP, BPP1-UP8.00" (203.2 mm) PITCH – 3/4" BOLT

PARTNUMBER

STD 39Section

XR 40Section

XL/XW 41Section

LGP 45Section

Link Assembly (Quantity 2) 152-8053 (7) 152-8048 (8) 152-8050 (9) 152-8049 (10)

Track LinksRH Pin End Master 8E-7407 1 1 1 1LH Pin End Master 8E-7408 1 1 1 1RH Bushing End Master (11) 165-1756 1 1 1 1LH Bushing End Master (11) 165-1757 1 1 1 1RH Regular (11) 165-1754 38 39 40 44LH Regular (11) 165-1755 38 39 40 44Other ComponentsPin 160-7821 39 40 41 45Bushing 165-1769 39 40 41 45Seal Assembly (Rigid) 207-0544 156 160 164 180Thrust Ring 152-8071 156 160 164 180Stopper 5G-2247 39 40 41 45Plug 6Y-0473 39 40 41 45Track Hardware (12)

Bolt 6V-1792 152 156 160 176Nut 1S-1860 152 156 160 176Master Bolt 9S-1838 4 4 4 4

7 Serviced replaced by 424-0842 (Heavy Duty) Refer to IRM PELJ1141 for conversion options.8 Serviced replaced by 424-0843 (Heavy Duty) Refer to IRM PELJ1141 for conversion options.9 Serviced replaced by 6I-9671 (Heavy Duty) Refer to IRM PELJ1141 for conversion options.10 Serviced replaced by 424-0847 (Heavy Duty) Refer to IRM PELJ1141 for conversion options.11 Joint assembly (Includes link and insert). Insert not serviced.12 Not part of link assembly; required to assemble track group.

67

D6T, D6R, D6H* Rotating Bushing Track is an application specific undercarriage designed for high abrassion/low impact applications (4,000 hour system life or less). When in-stalling Rotating Bushing Track on existing machines, refer to IRM UC95-5 for installation and guarding information. Also refer to Special Instruction SEHS9585for additional guarding information. For servicing information refer to Special Instruction SEHS9542. This product is not for use on Track Skidders.

D6H STD/XR/XL/LGP HYBRID TRACKD6H STD (39 SECTION): 8KB1-UP, 7PC1-UP, 4RC1-5652, 2KD1-5499, 3ED1-5499, 3ZF1-5953, 4YF1-5499, 6CF1-5555, 4LG1-5595, 1FJ1-5541D6H XR (40 SECTION): 5KK1-339, 6CK1-380, 7ZK1-5499, 1YL1-319, 2BL1-345, 2TL1-5499 D6H XL (41 SECTION): 8ZJ1-320, 9KJ1-620, 9LK1-

457, 8SK1-5499, 9RK1-5499D6H LGP (45 SECTION): 8YC1-UP, 6FC1-4091, 8FC1-5499, 1KD1-5499, 5HF1-4275, 2TG1-4092, 3YG1-4289, 4GG1-5499

8.00" (203.2 mm) PITCH – 3/4" BOLT

PARTNUMBER

STD 39Section

XR 40Section

XL/XW 41Section

LGP 45Section

Link Assembly – Quantity 2 236-9864 (13) 236-9865 (13) 236-9866 (13) 236-9874 (13)

Track LinksRH Pin End Master 228-2737 1 1 1 1LH Pin End Master 228-2738 1 1 1 1RH Bushing End Master 228-2739 1 1 1 1LH Bushing End Master 228-2740 1 1 1 1RH Regular 228-2735 38 39 40 44LH Regular 228-2736 38 39 40 44Other ComponentsPin 160-7819 (14) 39 40 41 45Bushing 230-4512 39 40 41 45Seal Assembly (Rigid) 207-0544 78 80 82 90Thrust Ring 152-8071 78 80 82 90Stopper 5G-2247 39 40 41 45Plug 6Y-0473 39 40 41 45Track Hardware (15)

Bolt (Grouser Shoe) 1S-1859 152 156 160 176Bolt (Self-Cleaning Shoe) 1S-1859 88Bolt (Self-Cleaning Shoe) 5A-7524 88Nut 1S-1860 152 156 160 176Master Bolt (Grouser Shoe) 9S-1838 4Master Bolt (Self-Cleaning Shoe) 3P-1111 2Master Bolt (Self-Cleaning Shoe) 9S-1838 4 4 4 2Special Sets/GroupsSeal Set (90 Seal Assemblies) 256-9360 1 1 1 1Bushing and Seal Group(37 Sections)

293-9147 1 1 1 1

13 See table titled "D6R/H Hybrid Track Shoes" for selections.14 Former pin 3P-1108 (Use 9G-1642 stopper).15 Not part of link assembly; required to assemble track group.

68

D6T, D6R, D6HD6H STD/XR/XL/LGP SEALED AND LUBRICATED TRACK

D6H STD (39 SECTION): 8KB1-UP, 7PC1-UP, 4RC1-5652, 2KD1-5499, 3ED1-5499, 3ZF1-5953, 4YF1-5499, 6CF1-5555, 4LG1-5595, 1FJ1-5541D6H XR (40 SECTION): 5KK1-339, 6CK1-380, 7ZK1-5499, 1YL1-319, 2BL1-345, 2TL1-5499

D6H XL (41 SECTION): 8ZJ1-320, 9KJ1-620, 9LK1-457, 8SK1-5499, 9RK1-5499D6H LGP (45 SECTION): 8YC1-UP, 6FC1-4091, 8FC1-5499, 1KD1-5499, 5HF1-4275, 2TG1-4092, 3YG1-4289, 4GG1-5499

8.00" (203.2 mm) PITCH – 3/4" BOLT

PARTNUMBER

STD 39Section

XR 40Section

XL/XW 41Section

LGP 45Section

Link Assembly (Quantity 2) 8E-4326 (16) 8E-4327 (17) 9U-9062 (18) 8E-4328 (19)

Track LinksRH Pin End Master 8E-2357 1 1 1 1LH Pin End Master 8E-2358 1 1 1 1RH Bushing End Master 8E-2359 1 1 1 1LH Bushing End Master 8E-2360 1 1 1 1RH Regular 8E-2355 38 39 40 44LH Regular 8E-2356 38 39 40 44Other ComponentsPin 160-7819 (20) 39 40 41 45Bushing 6Y-0930 (21) 39 40 41 45Seal Assembly (Rigid) 207-0544 78 80 82 90Thrust Ring 152-8071 78 80 82 90Stopper 5G-2247 39 40 41 45Plug 6Y-0473 39 40 41 45Track Hardware (22)

Bolt (Grouser Shoe) 6V-1792 152 156 160 176Bolt (Self-Cleaning Shoe) 6T-2162 88Bolt (Self-Cleaning Shoe) 6V-1792 88Nut 1S-1860 152 156 160 176Master Bolt (Grouser Shoe) 9S-1838 4 4 4 4Master Bolt (Self-Cleaning Shoe) 3P-1111 2Master Bolt (Self-Cleaning Shoe) 9S-1838 2

16 This link assembly has been replaced by the two following options: (A) Upgrade to heavy duty link assembly (424-0842) allows reuse ofcurrent shoes, but requires moving guide guards out board. Refer to the following Special Instructions SEHS9585 (reusing existingguards) or SEHS9350 (installing new guards). or (B) Upgrade to hybrid link assembly (236-9864) requires new shoes due to different bolthole pattern, see table titled "D6H Hybrid Track Shoes" for selections.


18 This link assembly has been replaced by the two following options: (A) Upgrade to heavy duty link assembly (6I-9671) allows reuse ofcurrent shoes, but requires moving guide guards out board. Refer to the following Special Instructions SEHS9585 (reusing existingguards) or SEHS9350 (installing new guards). or (B) Upgrade to hybrid link assembly (236-9866) requires new shoes due to different bolthole pattern, see table titled "D6H Hybrid Track Shoes" for selections.


20 Former pin 3P-1108 (Use 9G-1642 stopper).21 Straight wall bushings (9G-8734), used in early Crescent Seal Link Assemblies remain serviceable through Parts.22 Not part of link assemble; required to assemble track group.

69

D6T, D6R, D6HD6H STD/XR/XL/LGP SEALED AND LUBRICATED TRACKD6H STD (39 SECTION): 8KB1-UP, 7PC1-UP, 4RC1-5652, 2KD1-5499, 3ED1-5499, 3ZF1-5953, 4YF1-5499, 6CF1-5555, 4LG1-5595, 1FJ1-5541D6H XR (40 SECTION): 5KK1-339, 6CK1-380, 7ZK1-5499, 1YL1-319, 2BL1-345, 2TL1-5499D6H XL (41 SECTION): 8ZJ1-320, 9KJ1-620, 9LK1-457, 8SK1-5499, 9RK1-5499D6H LGP (45 SECTION): 8YC1-UP, 6FC1-4091, 8FC1-5499, 1KD1-5499, 5HF1-4275, 2TG1-4092, 3YG1-4289, 4GG1-54998.00" (203.2 mm) PITCH – 3/4" BOLT(Cont'd.)

PARTNUMBER

STD 39Section

XR 40Section

XL/XW 41Section

LGP 45Section

Special Sets/GroupsSeal Set (90 Seal Assemblies) 256-9360 1 1 1 1Bushing and Seal Group (39Sections)

6Y-5406 1 1 1 1

D6R/D6H LGP HEAVY DUTY QUAD TRACK*8.00" (203.2 mm) PITCH – 3/4" BOLT

QUANTITY PART NUMBERLink Assembly – 45 Section 2 424-0847 (23)

Components of Outrigger Chain: (Serviced Individually; quantities shown are per side)Track LinksRH Pin End Master 1 8E-7407LH Pin End Master 1 8E-7408RH Bushing End Master 1 8E-7409LH Bushing End Master 1 8E-7410RH Regular 44 8E-7405LH Regular 44 8E-7406Other ComponentsStub Pin 90 106-8237Stub Bushing 90 106-8235Track Hardware (Quantities shown are per side – 1 center chain; 2 outrigger chains) (24)

Bolt 352 6V-1792Nut 352 1S-1860Master Bolt 8 9S-1838* When installing Heavy Duty Track on existing machines, refer to IRM UC92-20 for installation and guarding information. Also refer to Special InstructionSEHS9585 for additional guarding information.

D6T, D6R, D6H SystemOne TRACK SHOES8.00" (203.2 mm) PITCH - 22 mm BOLT

TYPE WIDTHPART

NUMBERMASTER SHOEPART NUMBER

Moderate Service 20.0" (510 mm) 246-5207 254-4474Moderate Service 22.0" (560 mm) 234-9704 254-4472Moderate Service (Offset RH) (25) 22.0" (560 mm) 266-0083 –

23 Refer to Heavy Duty Track section for component information.24 Not part of link assembly; required to assemble track group.25 To be used on Series II earlier XL machines equipped with a PAT Blade.

70

D6T, D6R, D6HD6T, D6R, D6H SystemOne TRACK SHOES8.00" (203.2 mm) PITCH - 22 mm BOLT(Cont'd.)

TYPE WIDTHPART


Moderate Service (Offset LH) (26) 22.0" (560 mm) 266-0084 –

Moderate Service 24.0" (610 mm) 234-9705 254-4470Moderate Service (Center Hole) 24.0" (610 mm) 283-8705 339-0267Moderate Service (Center Hole) 26.0" (660 mm) 292-5653 339-0262Moderate Service (Clipped Grouser) 26.0" (660 mm) 322-7981 339-0253Moderate Service 28.0" (710 mm) 289-5214 339-0259Moderate Service (Clipped Grouser) 28.0" (710 mm) 294-0571 339-0259Moderate Service (Offset RH) (27) 28.0" (710 mm) 266-0088 –

Moderate Service (Offset LH) (27) 28.0" (710 mm) 266-0089 –

Moderate Service (Clipped Grouser) (Offset RH) (27) 28.0" (710 mm) 273-1685 –

Moderate Service (Clipped Grouser) (Offset LH) (27) 28.0" (710 mm) 273-1686 –

Moderate Service 30.0" (760 mm) 235-1397 254-4467Moderate Service (Center Hole) 30.0" (760 mm) 283-8707 339-0266Moderate Service (Offset RH) (28) 31.0" (790 mm) 294-0569 339-0258Moderate Service (Offset LH) (28) 31.0" (790 mm) 294-0570 339-0257Moderate Service (Offset RH) (29) 35.0" (900 mm) 265-8320 289-3579Moderate Service (Offset LH) (29) 35.0" (900 mm) 265-8321 289-3578Moderate Service 36.0" (915 mm) 234-9700 254-0230Extreme Service 20.0" (510 mm) 246-5205 254-4475Extreme Service 22.0" (560 mm) 246-5140 254-4473Extreme Service (Center Hole) 22.0" (560 mm) 283-8702 339-0268Extreme Service 24.0" (610 mm) 246-5203 254-4471Extreme Service (Clipped Grouser) 24.0" (610 mm) 274-2008 339-0269Extreme Service (Center Hole) 24.0" (610 mm) 270-2672 291-9151Extreme Service (Offset RH) (30) 24.0" (610 mm) 297-8456 297-8460Extreme Service (Offset LH) (30) 24.0" (610 mm) 297-8455 297-8459Extreme Service (Offset RH) (Clipped Grouser) (30) 24.0" (610 mm) 297-8454 297-8458Extreme Service (Offset LH) (Clipped Grouser) (30) 24.0" (610 mm) 297-8453 297-8457Extreme Service 28.0" (710 mm) 294-0567 339-0254Extreme Service (Center Hole) 28.0" (710 mm) 291-5594 339-0263Extreme Service 30.0" (760 mm) 237-7531 254-4469Extreme Service (Center Hole) 30.0" (760 mm) 246-5213 254-4468Extreme Service (Offset RH) (28) 31.0" (790 mm) 294-0574 339-0256Extreme Service (Offset LH) (28) 31.0" (790 mm) 294-0575 339-0255

26 To be used on Series II earlier XL machines equipped with a PAT Blade.27 To be used on R Series II XW and XL machines equipped with a PAT Blade.28 To be used on D6T, D6R Series III XW and LGP machines equipped with a PAT Blade.29 To be used on D6R Series II LGP machines equipped with a PAT Blade.30 To be used on D6T, D6R Series III XL machines equipped with a PAT Blade.

71

D6T, D6R, D6HD6T, D6R, D6H SystemOne TRACK SHOES8.00" (203.2 mm) PITCH - 22 mm BOLT(Cont'd.)

TYPE WIDTHPART


Extreme Service 36.0" (915 mm) 242-8904 254-0234Extreme Service (Center Hole) 36.0" (915 mm) 246-5211 254-0233

D6T, D6R, D6H TRACK SHOES8.00" (203.2 mm) PITCH – 3/4" BOLT

(PER MACHINE) WIDTHREGULAR SHOEPART NUMBER


Extreme Service 18.0" (460 mm) 6Y-6390 6Y-6392 Y Y N NExtreme Service 20.0" (510 mm) 6Y-6391 6Y-6394 Y Y Y NExtreme Service(Trapezoidal Opening)

20.0" (510 mm) 1Q-4935 1Q-4996 Y Y Y N

Extreme Service 22.0" (560 mm) 6Y-6389 6Y-6412 Y Y Y NExtreme Service(Trapezoidal Opening)

22.0" (560 mm) 1Q-4625 1Q-4626 Y Y Y N

Extreme Service (Offset RH) (31) 22.0" (560 mm) 252-9705 252-9707 N N Y NExtreme Service (Offset LH) (31) 22.0" (560 mm) 252-9706 252-9708 N N Y NExtreme Service 24.0" (610 mm) 1Q-4930 6Y-6397 Y Y Y YExtreme Service(Trapezoidal Opening)

24.0" (610 mm) 157-1373 157-1374 Y Y Y Y

Extreme Service 28.0" (710 mm) 218-3387 218-3388 N N N YExtreme Service 30.0" (760 mm) 138-5774 6Y-6404 N N N YExtreme Service(Trapezoidal Opening)

30.0" (760 mm) 1Q-4973 1Q-4607 N N N Y

Extreme Service 36.0" (915 mm) 169-5868 169-5867 N N N YExtreme Service(Trapezoidal Opening)

36.0" (915 mm) 1Q-4728 1Q-4729 N N N Y

Moderate Service 20.0" (510 mm) 6Y-6285 6Y-6292 Y Y Y NModerate Service(Trapezoidal Opening)

20.0" (510 mm) 1Q-4924 1Q-4994 Y Y Y N

Moderate Service 22.0" (560 mm) 6Y-6286 6Y-6294 Y Y Y NModerate Service(Trapezoidal Opening)

22.0" (560 mm) 1Q-4926 1Q-4995 Y Y Y N

Moderate Service (Offset RH) (31) 22.0" (560 mm) 160-4939 160-5798 N N Y NModerate Service (Offset LH) (31) 22.0" (560 mm) 160-4940 160-5799 N N Y NModerate Service 24.0" (610 mm) 6Y-6287 6Y-6296 Y Y Y YModerate Service(Trapezoidal Opening)

24.0" (610 mm) 1Q-4958 1Q-4997 Y Y Y Y

Moderate Service 26.0" (660 mm) 133-2890 6Y-6298 Y Y Y Y

31 To be used on D6T/R/H XL machines equipped with a Pat Blade

72

D6T, D6R, D6HD6T, D6R, D6H TRACK SHOES8.00" (203.2 mm) PITCH – 3/4" BOLT(Cont'd.)

(PER MACHINE) WIDTHREGULAR SHOEPART NUMBER


Moderate Service 28.0" (710 mm) 125-5167 125-5163 N N N YModerate Service (RH Offset) (32) 28.0" (710 mm) 185-5253 185-5254 N N Y NModerate Service (LH Offset) (32) 28.0" (710 mm) 185-5256 185-5257 N N Y NModerate Service 30.0" (760 mm) 6Y-8973 6Y-6300 N N N YModerate Service(Trapezoidal Opening)

30.0" (760 mm) 1Q-4744 1Q-4745 N N N Y

Moderate Service (RH Offset) (33) 31.0" (790 mm) 294-4979 294-4981 N N N YModerate Service (LH Offset) (33) 31.0" (790 mm) 294-4980 294-4982 N N N YModerate Service 33.5" (850 mm) 200-6493 200-6494 N N N YModerate Service 36.0" (915 mm) 196-7839 196-1236 N N N YModerate Service(Trapezoidal Opening)

36.0" (915 mm) 196-1233 196-1232 N N N Y

Moderate Service (RH Offset) (33) 36.0" (915 mm) 200-6495 200-6496 N N N YModerate Service (Offset LH) (33) 36.0" (915 mm) 200-6497 200-6498 N N N YDouble Grouser 20.0" (510 mm) 8E-4498 8E-6114 Y N N NDouble Grouser 21.7" (550 mm) 127-7009 8E-4497 Y N N NSelf-Cleaning 39.0" (990 mm) 116-8545 116-8548 N N N YModerate Service (Tri) (RH) 26" (660 mm) 133-0248 133-0246 N N N YModerate Service (Tri) (LH) 26" (660 mm) 133-0249 133-0247 N N N YModerate Service (Tri) (RH)(Clipped Grouser)

30" (760 mm) 133-0252 133-0250 N N N Y

Moderate Service (Tri) (LH)(Clipped Grouser)

30" (760 mm) 133-0253 133-0251 N N N Y

Quad (MS) 36.0" (915 mm) 196-1235 196-1234 N N N Y

D6H/R/T GENERAL DUTY SHOESTrack Groups have Moderate Service shoes that are not serviced, Heavy Duty Moderate Service shoes are availablefor use on link assemblies. Refer to the table above for more information on offerings.

D6H HYBRID TRACK SHOESUSE WITH TRACK LINKS 228-2735, 228-2736

8.00" (203.2 mm) PITCH – 3/4" BOLT

TYPE WIDTH

REGULARSHOE PARTNUMBER


Extreme Service 18.0" (460 mm) 6Y-6393 6Y-6392 Y Y N NExtreme Service(Trapezoidal Opening)

18.0" (460 mm) 1Q-4985 1Q-4984 Y Y Y N

32 To be used on D6T/R/H XW machines equipped with a Pat Blade33 To be used on D6T/R/H LPG machines equipped with a Pat Blade

73

D6T, D6R, D6HD6H HYBRID TRACK SHOESUSE WITH TRACK LINKS 228-2735, 228-27368.00" (203.2 mm) PITCH – 3/4" BOLT(Cont'd.)

TYPE WIDTH

REGULARSHOE PARTNUMBER


Extreme Service 20.0" (510 mm) 6Y-6395 6Y-6394 Y Y Y NExtreme Service 22.0" (560 mm) 6Y-6411 6Y-6412 Y Y Y NExtreme Service 24.0" (610 mm) 6Y-6398 6Y-6397 Y Y Y YExtreme Service(Trapezoidal Opening)

24.0" (610 mm) 3Q-5391 (34) 157-1374 Y Y Y Y

Extreme Service 30.0" (760 mm) 6Y-6405 6Y-6404 N N N YExtreme Service 36.0" (915 mm) 6Y-6401 169-5867 N N N YModerate Service 20.0" (510 mm) 6Y-6291 6Y-6292 Y Y Y NModerate Service 22.0" (560 mm) 6Y-6293 6Y-6294 Y Y Y NModerate Service 24.0" (610 mm) 6Y-6295 6Y-6296 Y Y Y YModerate Service 26.0" (660 mm) 6Y-6297 6Y-6298 Y Y Y YModerate Service 30.0" (760 mm) 6Y-6299 6Y-6300 N N N YModerate Service 36.0" (915 mm) 196-1237 196-1236 N N N YDouble Grouser 21.7" (550 mm) 8E-4496 8E-4497 Y N N NSelf-Cleaning 36.0" (915 mm) 3P-1134 3P-1133 N N N Y

D6T, D6R, D6H SPROCKETSSystemOne, Heavy Duty, Hybrid, Rotating Bushing, and Sealed and Lubricated Track

(PER SIDE) QUANTITY PART NUMBERSprocket Segment (Tough Steel) (5 Tooth) 5 173-0946Bolt 25 6V-0937Nut 25 7H-3607Washer 25 2S-5658

D6H/R/T GENERAL DUTY SPROCKETS SEGMENTS(Per Side) QUANTITY PART NUMBER(Per Side) 5 398-0972Bolt ¾” 25 6V-0937Nut 25 7H-3607Washer 25 2S-5658

34 Clipped Grouser

74

D6T, D6R, D6HD6T, D6R, D6H, SystemOne RELIEVED TREAD IDLER

STD, XL, XW, IG, LGP

(Per Machine) QUANTITY PART NUMBERGroup 4 323-1170 (35)


Bearing (37) 2 9P-2245Shaft 1 149-2494Collar 2 107-3945Retainer 2 149-2495Thrust Washer (38) 2 106-7691Bolt 24 1T-0765Washer 24 5M-2894Seal – Duo-Cone Group (Symmetric Seal) 2 162-7862Toric Ring (37) 2 162-2166Seal – Retainer 2 2H-3928Seal – Collar 2 7J-2036Stopper 1 9G-5664Plug 1 6Y-0473

D6T, D6R, D6H SystemOne LANDFILL/SPECIAL APPLICATION RELIEVED TREAD IDLERSTD, XL, XW, IG, LGP

QUANTITY PART NUMBERGroup 4 351-0886 (35)


Bearing (37) 2 9P-2245Shaft 1 149-2494Collar 2 167-1951Ring 2 170-0792Seal 2 167-1952Retainer 2 167-1950Thrust Washer (38) 2 106-7691Bolt 24 9B-7237Washer 24 8T-4896Seal – Duo-Cone Group (Symmetric Seal) 2 162-7862Toric Ring (37) 2 162-2166Seal – Retainer 2 2H-3928

35 See Special Instructions REHS4393 for information regarding modification of idler guards/scrapers on existing machines built prior toApril 2010.

36 Serviced by 323-117037 Component of preceding assembly or group; quantity shown is quantity per assembly or group.38 Use (1) 9W2423 Thrust Washer and (4) 2H1190 Dowels to repair former 9G9350 Retainer Assembly. DO NOT DRILL AND DOWEL NEW

1067691 Thrust Washer. See Special Instruction SEHS8515.39 Serviced by 351-0886

75

D6T, D6R, D6HD6T, D6R, D6H SystemOne LANDFILL/SPECIAL APPLICATION RELIEVED TREAD IDLERSTD, XL, XW, IG, LGP(Cont'd.)

QUANTITY PART NUMBERGroup 4 351-0886 (39)

Seal – Collar 2 7J-2036Stopper 1 9G-5664Plug 1 6Y-0473

D6T, D6R, D6H, STD SystemOne CENTER TREAD IDLER HARDWARE ARRANGEMENT(PER MACHINE) QUANTITY PART NUMBERHardware Idler Arrangement (Includes hardware for 4 idler groups) 1 293-4691

Components of Idler Hardware ArrangementShim (Permanent) (6 mm) 8 233-4846Shim (Adjustable) (10 mm) 8 156-5342Bolt (20 mm) (D6R) 16 8T-0656Washer (20 mm) (D6R) 16 153-5044Bolt (3/4") (D6H) 16 6K-1330Washer (3/4") (D6H) 16 5P-8248Plate- Scraper Base (Weld on top of frame) 4 234-4319Side Scraper (Bolts to scraper base plate) 8 238-0452Tread Scraper (Bolts to scraper base plate) 4 238-0453Scraper Bolt (12 mm) 32 8T-4139Scraper Washer (12 mm) 32 5P-1076Plate Assembly (Weld to front end guide) (40) 2 283-5249Plate Assembly (Weld to front end guide) (40) 2 283-5250Plate Assembly (Weld to rear end guide) (40) 2 283-5253Plate Assembly (Weld to rear end guide) (40) 2 283-5254Plate - Scraper (Bolts to end guides) 8 282-4017Bolt (12 mm) (Plate to end guide) 24 8T-4194Washer (Plate to end guide) 24 5P-1076End Cap (Abutment Style) (41) 8 152-3421Block (41) 8 165-6946

39 See Special Instructions REHS4393 for information regarding modification of idler guards/scrapers on existing machines built prior toApril 2010.

40 Plate assembly only required when retrofitting a machine in the field. New machines from the factory already have the threaded holesin the end guides to mount the scraper plates.

41 This part is not included within the hardware arrangement. Needs to be ordered separately or reused from current design.

76

D6T, D6R, D6HD6T, D6R, D6H, XL, XW, IG SystemOne CENTER TREAD IDLER HARDWARE ARRANGEMENT(PER MACHINE) QUANTITY PART NUMBERHardware Idler Arrangement (Includes hardware for 4 idler groups) 1 293-4692

Components of Idler Hardware ArrangementShim (Permanent) (6 mm) 8 233-4846Shim (Adjustable) (10 mm) 8 156-5342Bolt (20 mm) (D6R) 16 8T-0656Washer (20 mm) (D6R) 16 153-5044Bolt (3/4") (D6H) 16 6K-1330Washer (3/4") (D6H) 16 5P-8248Plate- Scraper Base (Weld to Top front Track Roller Frame) 2 234-4320Plate- Scraper Base (Weld to Top Rear Track Roller Frame) 2 234-4319Side Scraper (Front) (Bolt to Scraper Base Plate) 4 238-0450

Side Scraper (Rear) (Bolt to Scraper Base Plate) 4 238-0452Tread Scraper 4 238-0453Scraper Bolt (12 mm) 32 8T-4139Scraper Washer (12 mm) 32 5P-1076Plate Assembly (Weld to Rear End Guide) (42) 2 283-5251Plate Assembly (Weld to Rear End Guide) (42) 2 283-5252Plate (Weld to Front End Guide) (42) 4 279-4242Plate Scraper (Front) (Bolts to End Guide) 4 279-4243

Bolt (12 mm) (Plate Scraper to End Guide) 12 8T-4183Washer (12 mm) (Plate Scraper to End Guide) 12 5P-1076Plate Scraper (Rear) (Bolts to End Guide) 4 282-4017

Bolt (12 mm) (Plate Scraper to End Guide) 12 8T-4194Washer (12 mm) (Plate Scraper to End Guide) 12 5P-1076End Cap (Abutment Style) (43) 8 152-3421Block (43) 8 165-6946

D6T, D6R, D6H, LGP SystemOne CENTER TREAD IDLER HARDWARE ARRANGEMENT(PER MACHINE) QUANTITY PART NUMBERHardware Idler Arrangement (Includes hardware for 4 idler groups) 1 293-4693

Components of Idler Hardware ArrangementEnd Cap (Abutment Style) (Front LH) 2 159-3662End Cap (Abutment Style) (Front RH) 2 160-6910End Cap (Abutment Style) (Rear LH) 2 174-8783End Cap (Abutment Style) (Rear RH) 2 174-8786Block (Front LH) 2 233-4848


43 This part is not included within the hardware arrangement. Needs to be ordered separately or reused from current design.

77

D6T, D6R, D6HD6T, D6R, D6H, LGP SystemOne CENTER TREAD IDLER HARDWARE ARRANGEMENT(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERHardware Idler Arrangement (Includes hardware for 4 idler groups) 1 293-4693

Block (Front RH) 2 233-4851Block (Rear LH) 2 174-8788Block (Rear RH) 2 174-8789Shim (Front) 4 156-5342Shim (Rear) 8 174-8790Bolt (20 mm) (D6R) 16 8T-0657Washer (20 mm) (D6R) 16 153-5044Bolt (3/4") (D6H) 16 1D-4617Washer (3/4") (D6H) 16 5P-8248Plate- Scraper Base (Weld of top of frame) 4 234-4319

Side Scraper (Bolts to scraper base plate) 8 238-0452Tread Scraper (Bolts to scraper base plate) 4 238-0453

Scraper Bolt (12 mm) 32 8T-4139Scraper Washer (12 mm) 32 5P-1076Plate Assembly (Weld to front end guide) (44) 2 283-5249Plate Assembly (Weld to front end guide) (44) 2 283-5250Plate Assembly (Weld to rear end guide) (44) 2 283-5253Plate Assembly (Weld to rear end guide) (44) 2 283-5254Plate - Scraper (Bolts to end guides) 8 282-4017Bolt (12 mm) (Plate to end guide) 24 8T-4194Washer (12 mm) (Plate to end guide) 24 5P-1076

LANDFILL/SPECIAL APPLICATIONINCREASED TREAD WEAR MATERIAL

(PER MACHINE) QUANTITY PART NUMBERGroup (Large Diameter - 570 mm tread) 4 206-1895

Components of GroupIdler Assembly (Large Diameter) 1 202-4303Bearing (45) 2 9P-2245Shaft 1 149-2494Collar 2 167-1951Retainer 2 167-1950Thrust Washer (46) 2 106-7691Bolt 24 9B-7237


45 Component of preceding assembly or group; quantity shown is quantity per assembly or group.46 Use (1) 9W2423 Thrust Washer and (4) 2H1190 Dowels to repair former 9G9350 Retainer Assembly. DO NOT DRILL AND DOWEL NEW

1067691 Thrust Washer. See Special Instruction SEHS8515.

78

D6T, D6R, D6HLANDFILL/SPECIAL APPLICATIONINCREASED TREAD WEAR MATERIAL(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERGroup (Large Diameter - 570 mm tread) 4 206-1895

Washer 24 8T-4898Stabilizer Ring 2 –

Seal – Duo-Cone Group (Inverted Seal) 2 –

Toric Ring (47) 1 –

O-Ring (47) 1 –

Seal – Duo-Cone Group (Symmetric Seal) 2 167-1952Toric Ring 2 170-0792Seal – Retainer 2 2H-3928Seal – Collar 2 7J-2036Stopper 1 9G-5664Plug 1 6Y-0473Mounting Hardware (D6H) (48)

End Cap (Abutment Style) 2 152-3421Block 2 165-6946Bolt (3/4") 4 1D-4615Washer (3/4") 4 5P-8248Shim (Front Idlers Only) 2 8G-9530Mounting Hardware (D6R) (48)

End Cap (Abutment Style) 2 152-3421Block 2 165-6946Bolt (20 mm) 4 6V-9167Washer (20 mm) 4 8T-3282Shim (Front Idlers Only) 2 8G-9530

D6T STD/XL/XW, D6R STD/XL/XW, D6H STD/XL IDLERSINCREASED TREAD WEAR MATERIAL

(PER MACHINE) QUANTITYFORMER

PART NUMBER PART NUMBERGroup (Large Diameter - 570 mm tread) 4 – 202-4304

Components of GroupIdler Assembly (Large Diameter) 1 202-4303 202-4303Bearing (47) 2 9P-2245 9P-2245Shaft 1 6T-3220 149-2494Collar 2 – 107-3945Retainer 2 9G-9349 149-2495


79

D6T, D6R, D6HD6T STD/XL/XW, D6R STD/XL/XW, D6H STD/XL IDLERSINCREASED TREAD WEAR MATERIAL(Cont'd.)


PART NUMBER PART NUMBERGroup (Large Diameter - 570 mm tread) 4 – 202-4304

Thrust Washer (49) 2 106-7691 106-7691Bolt 24 0S-1594 1T-0765Washer 24 5M-2894 5M-2894Stabilizer Ring 2 6T-4871 –

Seal – Duo-Cone Group (Inverted Seal) 2 7T-0158 –

Toric Ring (50) 1 6P-8912 –

O-Ring (50) 1 6V-2701 –

Seal – Duo-Cone Group (Symmetric Seal) 2 – 162-7862Toric Ring 2 – 162-2166Seal – Retainer 2 2H-3928 2H-3928Seal – Collar 2 – 7J-2036Stopper 1 9G-5664 9G-5664Plug 1 6Y-0473 6Y-0473Mounting Hardware (D6H) (51)

End Cap (Abutment Style) 2 152-3421 152-3421Block 2 165-6946 165-6946Bolt (3/4") 4 1D-4615 1D-4615Washer (3/4") 4 5P-8248 5P-8248Shim (Front Idlers Only) 2 8G-9530 8G-9530Mounting Hardware (D6R) (51)

End Cap (Abutment Style) 2 152-3421 152-3421Block 2 165-6946 165-6946Bolt (20 mm) 4 6V-9167 6V-9167Washer (20 mm) 4 8T-3282 8T-3282Shim (Front Idlers Only) 2 8G-9530 8G-9530Special Application Arctic Idler GroupIdler Group (Large Diameter) 4 – 205-0709Seal – Duo-Cone Group (Symmetric Seal) 2 – 162-7862Toric Ring 2 – 162-2166Seal – Duo-Cone Group (Inverted Seal) 2 7T-4722 –

Toric Ring 1 7T-1094 –

O-Ring 1 8T-2272 –

49 Use (1) 9W2423 Thrust Washer and (4) 2H1190 Dowels to repair former 9G9350 Retainer Assembly. DO NOT DRILL AND DOWEL NEW1067691 Thrust Washer. See Special Instruction SEHS8515.


80

D6T, D6R, D6HD6T STD/XL/XW, D6R STD/XL/XW, D6H STD/XL LANDFILL/SPECIAL APPLICATION IDLERS

INCREASED TREAD WEAR MATERIAL(PER MACHINE) QUANTITY PART NUMBERGroup (Large Diameter - 570 mm tread) 4 206-1895

Components of GroupIdler Assembly (Large Diameter) 1 202-4303Bearing (52) 2 9P-2245Shaft 1 149-2494Collar 2 167-1951Retainer 2 167-1950Thrust Washer (53) 2 106-7691Bolt 24 9B-7237Washer 24 8T-4898Stabilizer Ring 2 –



O-Ring (52) 1 –





1067691 Thrust Washer. See Special Instruction SEHS8515.54 These components are not included in the idler group; quantities shown are required to mount each idler.

81

D6T, D6R, D6HD6R/D6H XR IDLERS

INCREASED TREAD WEAR MATERIAL


PART NUMBER PART NUMBERGroup (Small Diameter - 545 mm tread) 4 – 202-4296

Components of GroupIdler Assembly (Small Diameter) 1 202-4295 202-4295Bearing (55) 2 9P-2245 9P-2245Shaft 1 6T-3220 149-2494Collar 2 – 107-3945Retainer 2 9G-9349 149-2495Thrust Washer (56) 2 106-7691 106-7691Bolt 24 0S-1594 1T-0765Washer 24 5M-2894 5M-2894Stabilizer Ring 2 6T-4871 –


Toric Ring (55) 1 6P-8912 –

O-Ring (55) 1 6V-2701 –



End Cap (Abutment Style) 2 152-3421 152-3421Block 2 165-6946 165-6946Bolt (20 mm) 4 6V-9167 6V-9167Washer (mm) 4 8T-3282 8T-3282Shim (Front Idlers Only) 2 8G-9530 8G-9530Special Application SealsSeal – Duo-Cone Group 2 7T-4722 –


O-Ring 1 8T-2272 –



82

D6T, D6R, D6HD6R/D6H XR LANDFILL/SPECIAL APPLICATION IDLERS

INCREASED TREAD WEAR MATERIAL(PER MACHINE) QUANTITY PART NUMBERGroup (Small Diameter - 545 mm tread) 4 206-1897

Components of GroupIdler Assembly (Small Diameter) 1 202-4295Bearing (58) 2 9P-2245Shaft 1 149-2494Collar 2 167-1951Retainer 2 167-1950Thrust Washer (59) 2 106-7691Bolt 24 9B-7237Washer 24 8T-4898Stabilizer Ring 2 –



O-Ring (58) 1 –



End Cap (Abutment Style) 2 152-3421Block 2 165-6946Bolt (20 mm) 4 6V-9167Washer (mm) 4 8T-3282Shim (Front Idlers Only) 2 8G-9530



83

D6T, D6R, D6HD6T/D6R/D6H LGP IDLERS*INCREASED TREAD WEAR MATERIAL

4HN0709-UP, 4TR1123-UP, 6GR0708-UP, 7AR0717-UP, 8TM1303-UP, 9PN1851-UP, 8LN0547-UP



Components of GroupIdler Assembly (Small Diameter) 1 202-4295 202-4295Bearing (61) 2 9P-2245 9P-2245Shaft 1 6T-3220 149-2494Collar 2 – 107-3945Retainer 2 9G-9349 149-2495Thrust Washer (62) 2 106-7691 106-7691Bolt 24 0S-1594 1T-0765Washer 24 5M-2894 5M-2894Stabilizer Ring 2 6T-4871 –


Toric Ring (61) 1 6P-8912 –

O-Ring (61) 1 6V-2701 –



End Cap (Abutment Style) 2 152-3421 152-3421Block 2 165-6946 165-6946Bolt (20 mm) 4 6V-9167 6V-9167Washer (20 mm) 4 8T-3282 8T-3282Shim (Front Idlers Only) 2 8G-9530 8G-9530Special Application SealsSeal – Duo-Cone Group 2 7T-4722 –



84

D6T, D6R, D6HD6T/D6R/D6H LGP IDLERS*INCREASED TREAD WEAR MATERIAL4HN0709-UP, 4TR1123-UP, 6GR0708-UP, 7AR0717-UP, 8TM1303-UP, 9PN1851-UP, 8LN0547-UP(Cont'd.)




O-Ring 1 8T-2272 –

D6T/D6R/D6H LGP LANDFILL/SPECIAL APPLICATION IDLERS*INCREASED TREAD WEAR MATERIAL

4HN0709-UP, 4TR1123-UP, 6GR0708-UP, 7AR0717-UP, 8TM1303-UP, 9PN1851-UP, 8LN0547-UP

(PER MACHINE) QUANTITY PART NUMBERGroup (Small Diameter - 545 mm tread) 4 206-1897

Components of GroupIdler Assembly (Small Diameter) 1 202-4295Bearing (64) 2 9P-2245Shaft 1 149-2494Collar 2 167-1951Retainer 2 167-1950Thrust Washer (65) 2 106-7691Bolt 24 9B-7237Washer 24 8T-4898Stabilizer Ring 2 –



O-Ring (64) 1 –


End Cap (Abutment Style) 2 152-3421Block 2 165-6946Bolt (3/4") 4 1D-4615Washer (3/4") 4 5P-8248Shim (Front Idlers Only) 2 8G-9530



85

D6T, D6R, D6HD6T/D6R/D6H LGP LANDFILL/SPECIAL APPLICATION IDLERS*INCREASED TREAD WEAR MATERIAL4HN0709-UP, 4TR1123-UP, 6GR0708-UP, 7AR0717-UP, 8TM1303-UP, 9PN1851-UP, 8LN0547-UP(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERGroup (Small Diameter - 545 mm tread) 4 206-1897

Mounting Hardware (D6R) (67)


* Effective serial numbers when D6R's were equipped with 4 small idlers (small diameter)1KD1-401, 1KD662-UP, 2TG544-UP, 3YG557-UP, 4GG466-UP, 4HN1-UP,4TR1-UP, 5HF442-UP, 6FC718-UP, 6GR1-UP, 7AR1-UP, 8FC1-460, 8FC965-UP, 8LN1-UP, 8TM1-UP, 8YC1-472, 8YC476, 8YC478, 8YC480-481, 8YC483, 9PN1-UP.

D6H LGP IDLERSINCREASED TREAD WEAR MATERIAL

FRONT IDLERS LARGE DIAMETER, REAR IDLERS SMALL DIAMETER1KD402-661, 2TG1-543, 3YG1-556, 4GG1-465, 5HF1-441, 6FC1-717, 8FC461-964, 8YC473-UP


PART NUMBER PART NUMBERGroup (Front, Large Diameter - 570 mm tread) 2 – 202-4304

Group (Rear, Small Diameter - 545 mm tread) 2 – 202-4296

Components of GroupIdler Assembly (Large Diameter) 1 202-4303 202-4303

Idler Assembly (Small Diameter) 1 202-4295 202-4295Bearing (68) 2 9P-2245 9P-2245Shaft 1 6T-3220 149-2494Collar 2 – 107-3945Retainer 2 9G-9349 149-2495Thrust Washer (69) 2 106-7691 106-7691Bolt 24 0S-1594 1T-0765Washer 24 5M-2894 5M-2894Stabilizer Ring 2 6T-4871 –


Toric Ring (68) 1 6P-8912 –

O-Ring (68) 1 6V-2701 –

Seal – Duo-Cone Group (Symmetric Seal) 2 – 162-7862Toric Ring 2 – 162-2166Seal – Retainer 2 2H-3928 2H-3928Seal – Collar 2 – 7J-2036

67 These components are not included in the idler group; quantities shown are required to mount each idler.68 Component of preceding assembly or group; quantity shown is quantity per assembly or group.69 Use (1) 9W-2423 Thrust Washer and (4) 2H-1190 Dowels to repair former 9G-9350 Retainer Assembly. DO NOT DRILL AND DOWEL NEW


86

D6T, D6R, D6HD6H LGP IDLERSINCREASED TREAD WEAR MATERIALFRONT IDLERS LARGE DIAMETER, REAR IDLERS SMALL DIAMETER1KD402-661, 2TG1-543, 3YG1-556, 4GG1-465, 5HF1-441, 6FC1-717, 8FC461-964, 8YC473-UP(Cont'd.)


PART NUMBER PART NUMBERGroup (Front, Large Diameter - 570 mm tread) 2 – 202-4304

Group (Rear, Small Diameter - 545 mm tread) 2 – 202-4296

Stopper 1 9G-5664 9G-5664Plug 1 6Y-0473 6Y-0473Mounting Hardware (70)

End Cap (Abutment Style) 2 152-3421 152-3421Block 2 165-6946 165-6946Bolt (3/4") 4 1D-4615 1D-4615Washer (3/4") 4 5P-8248 5P-8248Shim (Front Idlers Only) 2 8G-9530 8G-9530Special Application SealsSeal – Duo-Cone Group 2 7T-4722 –


O-Ring 1 8T-2272 –

D6H LGP LANDFILL/SPECIAL APPLICATION IDLERSINCREASED TREAD WEAR MATERIAL

FRONT IDLERS LARGE DIAMETER, REAR IDLERS SMALL DIAMETER1KD402-661, 2TG1-543, 3YG1-556, 4GG1-465, 5HF1-441, 6FC1-717, 8FC461-964, 8YC473-UP

(PER MACHINE) QUANTITY PART NUMBERGroup (Front, Large Diameter - 570 mm tread) 2 206-1895

Group (Rear, Small Diameter - 545 mm tread) 2 206-1897

Components of GroupIdler Assembly (Large Diameter) 1 202-4303Idler Assembly (Small Diameter) 1 202-4295Bearing (71) 2 9P-2245Shaft 1 149-2494Collar 2 167-1951Retainer 2 167-1950Thrust Washer (72) 2 106-7691Bolt 24 9B-7237Washer 24 8T-4898Stabilizer Ring 2 –


70 These components are not included in the idler group; quantities shown are required to mount each idler.71 Component of preceding assembly or group; quantity shown is quantity per assembly or group.72 Use (1) 9W-2423 Thrust Washer and (4) 2H-1190 Dowels to repair former 9G-9350 Retainer Assembly. DO NOT DRILL AND DOWEL NEW


87

D6T, D6R, D6HD6H LGP LANDFILL/SPECIAL APPLICATION IDLERSINCREASED TREAD WEAR MATERIALFRONT IDLERS LARGE DIAMETER, REAR IDLERS SMALL DIAMETER1KD402-661, 2TG1-543, 3YG1-556, 4GG1-465, 5HF1-441, 6FC1-717, 8FC461-964, 8YC473-UP(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERGroup (Front, Large Diameter - 570 mm tread) 2 206-1895

Group (Rear, Small Diameter - 545 mm tread) 2 206-1897


O-Ring (73) 1 –

Seal – Duo-Cone Group (Symmetric Seal) 2 167-1952Toric Ring 2 170-0792Seal – Retainer 2 2H-3928Seal – Collar 2 7J-2036Stopper 1 9G-5664Plug 1 6Y-0473Mounting Hardware (74)

End Cap (Abutment Style) 2 152-3421Block 2 165-6946Bolt (3/4") 4 1D-4615Washer (3/4") 4 5P-8248Shim (Front Idlers Only) 2 8G-9530

D6H/R/T GENERAL DUTY IDLERSSTD/XL/XW

(PER MACHINE) QUANTITY PART NUMBERIdler Group (Large Diameter - 570 mm tread) 4 395-4325

D6H/R/T GENERAL DUTY IDLERSLGP

(PER MACHINE) QUANTITY PART NUMBERIdler Group (Small Diameter - 545 mm tread) 4 395-4326

D6T, D6R, D6H HEAVY DUTY, HYBRID, GENERAL DUTY, AND SystemOne CARRIER ROLLERS(PER MACHINE) QUANTITY PART NUMBERCarrier Roller Group 2 235-5974


88

D6T, D6R, D6HD6T, D6R, D6H SystemOne TRACK ROLLERS(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) Roller Group – (75) 235-4157

Mounting Hardware (D6T/R) (76)

Cap 2 317-9080Bolt (20 mm) 4 8T-0360Washer 4 8T-3282Mounting Hardware (D6H) (76)

Cap 2 317-9079Bolt (3/4") 4 1D-4610Washer 4 5P-8248

D6T, D6R, D6H STANDARDIZED TRACK ROLLERSDESIGN WITH END CAPS

(PER MACHINE) QUANTITY PART NUMBERDouble Flange (DF) 4 (77) 288-0935

Single Flange (SF) 8 288-0934

Double Flange (DF) (Arctic) 4 (77) 288-0946

Single Flange (SF) (Arctic) 8 288-0945

Double Flange (DF) (High Heat) 4 (77) 288-0948

Single Flange (SF) (High Heat) 8 288-0947

Double Flange (DF) (Tall) – (78) 288-0936

Mounting Hardware (D6T/R) (76)

Cap 2 317-9080Bolt (20 mm) 4 8T-0360Washer 4 8T-3282Mounting Hardware (D6H) (76)


D6H/R/T GENERAL DUTY ROLLERS WITH END CAPSQUANTITYPER MACHINE PART NUMBER

Single Flange Roller 8 396-7353Double Flange Roller (79) 4 (79) 398-5218Roller Hardware (D6T/R) (76)

Cap 2 317-9080

75 12 required for STD machines; 14 required for XL, XW, and IG machines; 16 required for LGP machines.76 These components are not included in the roller group; quantities shown are required to mount each roller.77 8 DF rollers for LGP, 6 DF rollers for XR, XL, XW, and IG machines.78 Optional (DF) roller for guiding. Use quantity required for specific roller frame type.79 8 - DF rollers for LGP, 6 - DF rollers for XR, XL, XW, and IG machines.

89

D6T, D6R, D6HD6H/R/T GENERAL DUTY ROLLERS WITH END CAPS (Cont'd.)

QUANTITYPER MACHINE PART NUMBER

Bolt - HEX Head M20 4 8T-0360Washer 4 8T-3282Roller Hardware (D6H) (80)

Cap (81) 2 317-9079Bolt – (3/4”) 4 1D-4610Washer 4 5P-8248

D6T, D6R, D6H TRACK ROLLERSEND COLLARS, SYMMETRIC SEAL DESIGN

(PER MACHINE) QUANTITY PART NUMBERDouble Flange (DF) 4 (82) 231-3088 (83)

Single Flange (SF) 8 231-3087 (84)

Double Flange, Tall (DF, Tall) - (85) 231-3089 (86)

Components of GroupRoller Shell (DF) 1 120-5767 (83)

Roller Shell (SF) 1 120-5753 (84)

Double Flange, Tall (DF, Tall) 1 120-5804 (86)

Bushing Assembly 2 116-6698Bearing (87) 1 8P-5197Shaft 1 116-6702 (88)

End Collar 2 120-5785Ring (Retaining-Snap) 2 117-9748Ring (Lock) 2 5M-4443Seal – Duo-Cone Group 2 171-5882Toric Ring (87) 2 162-2166Seal – Bushing O-Ring 2 2H-3928Seal – Shaft O-Ring 2 5F-8000Stopper 1 7G-4332Plug 1 6Y-0473

80 8 - DF rollers for LGP, 6 - DF rollers for XR, XL, XW, and IG machines.81 Caps only required if machine had old style rollers.82 8 DF rollers for LGP machines, 6 DF rollers for XR and XL machines.83 For D6T/R Serviced Replaced By: 1 - Roller Group (DF) 288-0935, 2 - End Cap 317-9080, 4 - Bolt 8T-0360, 4 - Washer 8T-3282. For D6H Serv-

iced Replaced By: 1 - Roller Group (DF) 288-0935, 2 - End Cap 317-9079, 4 - Bolt 1D-4610, 4 - Washer 5P-8248.84 For D6T/R Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-9080, 4 - Bolt 8T-0360, 4 - Washer 8T-3282. For D6H Serv-

iced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-9079, 4 - Bolt 1D-4610, 4 - Washer 5P-8248.85 Optional DF rollers for guiding. Use quantity required for specific roller frame type.86 For D6T/R Serviced Replaced By: 1 - Roller Group (DF Tall) 288-0936, 2 - End Cap 317-9080, 4 - Bolt 8T-0360, 4 - Washer 8T-3282. For D6H

Serviced Replaced By: 1 - Roller Group (DF Tall) 288-0936, 2 - End Cap 317-9079, 4 - Bolt 1D-4610, 4 - Washer 5P-8248.87 Component of preceding assembly or group; quantity shown is quantity per assembly or group.88 For D6T/R Serviced Replaced By: 1 - Roller Group (DF) 288-0935 or 1 - Roller Group (SF) 288-0934, and 2 - End Cap 317-9080, 4 - Bolt 8T-

0360, 4 - Washer 8T-3282. For D6H Serviced Replaced By: 1 - Roller Group (DF) 288-0935, or 1 - Roller Group (SF) 288-0934, 2 - End Cap317-9079, 4 - Bolt 1D-4610, 4 - Washer 5P-8248.

90

D6T, D6R, D6HD6T, D6R, D6H TRACK ROLLERSEND COLLARS, SYMMETRIC SEAL DESIGN(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERMounting Hardware (D6H) (89)

Bolt (3/4") 4 1D-4608Washer 4 5H-1504Mounting Hardware (D6T/R) (89)

Bolt (20 mm) 4 6V-5845Washer 4 8T-3282

D6H TRACK ROLLERSFORMER DESIGN (BOLT-ON RETAINER)



Components of GroupRoller Shell (DF) 1 7T-4106 (91)

Roller Shell (SF) 1 7T-4101 (92)

Bearing 2 9P-2245Shaft 1 6T-0720 (93)

Retainer Assembly 2 7T-4152Thrust Washer (94) 1 9W-2423Dowel (95) 4 2H-1190Bolt (Retainer) 12 0S-1594Washer (Retainer) 12 5M-2894Stabilizer Ring 2 7T-4031Seal – Duo-Cone Group 2 7T-0158Toric Ring (95) 1 6P-8912Ring (95) 1 6V-2701Seal – Retainer O-Ring 2 5F-3144Stopper 1 7G-4332Plug 1 6Y-0473Mounting Hardware (89)

End Cap 2 6T-4861Bolt (3/4") 4 1D-4610

89 These components are not included in the roller group; quantities shown are required to mount each roller.90 8 DF rollers for LGP machines, 6 DF rollers for XR and XL machines.91 For D6H Serviced Replaced By: 1 - Roller Group (DF) 288-0935, 2 - End Cap 317-9079, 4 - Bolt 1D-4610, 4 - Washer 5P-8248.92 For D6H Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-9079, 4 - Bolt 1D-4610, 4 - Washer 5P-8248.93 For D6H Serviced Replaced By: 1 - Roller Group (DF) 288-0935, or 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-9079, 4 - Bolt 1D-4610, 4

- Washer 5P-824894 These components are only to repair retainer assembly. See Special Instruction SEHS8515.95 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

91

D6T, D6R, D6HD6H TRACK ROLLERSFORMER DESIGN (BOLT-ON RETAINER)(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERDouble Flange (DF) 4 (90) –


Washer 4 5P-8248Special Application SealsSeal – Duo-Cone Group 2 7T-4722Toric Ring 1 7T-1094O-Ring (96) 1 8T-2272

D6T, D6R STD SystemOne END GUIDING GUARDSMetric Hardware


D6T, D6R XL, XW, IG SystemOne END GUIDING GUARDSMetric Hardware

(PER MACHINE) QUANTITY PART NUMBERFrontGuard Assembly 2 163-2177Guard Assembly 2 163-2178Wear Strip 4 255-7174Bolt (12 mm) 12 8T-4184Washer 12 8T-4223RearGuard Assembly 2 163-2172Guard Assembly 2 163-2171Wear Strip 4 255-7174

90 8 DF rollers for LGP machines, 6 DF rollers for XR and XL machines.96 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

92

D6T, D6R, D6HD6T, D6R XL, XW, IG SystemOne END GUIDING GUARDSMetric Hardware(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERBolt (12 mm) 16 8T-4184Washer 16 8T-4223

D6T, D6R LGP SystemOne END GUIDING GUARDSMetric Hardware


D6T, D6R STD END GUIDING GUARDSHEAVY DUTY AND ROTATING BUSHING TRACK ONLY (METRIC MOUNTING HARDWARE)


93

D6T, D6R, D6HD6R XR END GUIDING GUARDS

HEAVY DUTY AND ROTATING BUSHING TRACK ONLY (METRIC MOUNTING HARDWARE)


D6T, D6R XL\XW END GUIDING GUARDSHEAVY DUTY AND ROTATING BUSHING TRACK ONLY (METRIC MOUNTING HARDWARE)


D6T, D6R LGP END GUIDING GUARDSHEAVY DUTY AND ROTATING BUSHING TRACK ONLY (METRIC MOUNTING HARDWARE)

(PER MACHINE) QUANTITY PART NUMBERFrontGuard Assembly 2 163-2175Guard Assembly 2 163-2176Wear Strip 4 160-4103Bolt (12 mm) 16 8T-4139Washer 16 8T-4223RearGuard Assembly 2 163-2173

94

D6T, D6R, D6HD6T, D6R LGP END GUIDING GUARDSHEAVY DUTY AND ROTATING BUSHING TRACK ONLY (METRIC MOUNTING HARDWARE)(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 163-2174Wear Strip 4 189-3032Bolt (12 mm) 16 8T-4139Washer 16 8T-4223

D6H STD SystemOne END GUIDING GUARDS*Metric Hardware

(PER MACHINE) QUANTITY PART NUMBERFrontGuard Assembly 2 6I-8141Guard Assembly 2 6I-8142Strip 4 255-7174Bolt (12 mm) 16 8T-4184Washer 16 8T-4223RearGuard Assembly 2 6I-8736Guard Assembly 2 6I-8737Strip 4 255-7174Bolt (12 mm) 16 8T-4184Washer 16 8T-4223* D6H machines that have been upgraded to heavy duty or rotating bushing track, only requires ordering strips and hardware from the table to be compatiblewith SystemOne track. D6H machines with seal and lubricated track (SALT) and end guiding guards that have a SPACER between the guard and the wear strip,are only required to remove spacer and order the strips and hardware from this table, then machine is compatible with SystemOne track. For D6H machines withwith seal and lubricated track (SALT) and end guiding guards that have NO SPACERS between the guard and strip have TWO options available to install System-One on those machines: (A) Torch off old guards and order guards and components from this table, weld at new location makes machine compatible with Sys-temOne track, refer to Special Instructions SEHS9350. (B) Torch off existing guards and rewelded at new location, order strips and hardware from the tablemakes machine compatible with SystemOne track, refer to Special Instructions (SEHS9585). For general overview of SystemOne Track Guiding Arrangements re-fer to Special Instructions REHS2104.

D6H XL, XW, IG SystemOne END GUIDING GUARDS*Metric Hardware

(PER MACHINE) QUANTITY PART NUMBERFrontGuard Assembly 2 163-2177Guard Assembly 2 163-2178Strip 2 255-7174Bolt 12 8T-4184Washer 12 8T-4223RearGuard Assembly 2 6I-8736Guard Assembly 2 6I-8737Strip 4 255-7174

95

D6T, D6R, D6HD6H XL, XW, IG SystemOne END GUIDING GUARDS*Metric Hardware(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERBolt 16 8T-4184Washer 16 8T-4223* D6H machines that have been upgraded to heavy duty or rotating bushing track, only requires ordering strips and hardware from the table to be compatiblewith SystemOne track. D6H machines with seal and lubricated track (SALT) and end guiding guards that have a SPACER between the guard and the wear strip,are only required to remove spacer and order the strips and hardware from this table, then machine is compatible with SystemOne track. For D6H machines withwith seal and lubricated track (SALT) and end guiding guards that have NO SPACERS between the guard and strip have TWO options available to install System-One on those machines: (A) Torch off old guards and order guards and components from this table, weld at new location makes machine compatible with Sys-temOne track, refer to Special Instructions SEHS9350. (B) Torch off existing guards and rewelded at new location, order strips and hardware from the tablemakes machine compatible with SystemOne track, refer to Special Instructions (SEHS9585). For general overview of SystemOne Track Guiding Arrangements re-fer to Special Instructions REHS2104.

D6H LGP SystemOne END GUIDING GUARDS*Metric Hardware

(PER MACHINE) QUANTITY PART NUMBERFrontGuard Assembly 2 9U-8451Guard Assembly 2 9U-8457Strip 4 255-7174Bolt 16 8T-4184Washer 16 8T-4223RearGuard Assembly 2 9U-8464Guard Assembly 2 9U-8459Strip 4 255-7174Bolt 16 8T-4184Washer 16 8T-4223* D6H machines that have been upgraded to heavy duty or rotating bushing track, only requires ordering strips and hardware from the table to be compatiblewith SystemOne track. D6H machines with seal and lubricated track (SALT) and end guiding guards that have a SPACER between the guard and the wear strip,are only required to remove spacer and order the strips and hardware from this table, then machine is compatible with SystemOne track. For D6H machines withwith seal and lubricated track (SALT) and end guiding guards that have NO SPACERS between the guard and strip have TWO options available to install System-One on those machines: (A) Torch off old guards and order guards and components from this table, weld at new location makes machine compatible with Sys-temOne track, refer to Special Instructions SEHS9350. (B) Torch off existing guards and rewelded at new location, order strips and hardware from the tablemakes machine compatible with SystemOne track, refer to Special Instructions (SEHS9585). For general overview of SystemOne Track Guiding Arrangements re-fer to Special Instructions REHS2104.

D6H STD END GUIDING GUARDS*SEALED AND LUBRICATED, HEAVY DUTY, AND ROTATING BUSHING TRACK ONLY (INCH MOUNTING HARDWARE)

(PER MACHINE) QUANTITY PART NUMBERFrontGuard Assembly 2 6I-8141Guard Assembly 2 6I-8142Bolt 16 8T-8919Washer 16 8T-4223

96

D6T, D6R, D6HD6H STD END GUIDING GUARDS*SEALED AND LUBRICATED, HEAVY DUTY, AND ROTATING BUSHING TRACK ONLY (INCH MOUNTING HARDWARE)(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERStrip 4 9U-8456Spacer (97) 4 9U-8791RearGuard Assembly 2 6I-8736Guard Assembly 2 6I-8737Bolt 16 8T-8919Washer 16 5P-1076Strip 4 9U-8456Spacer (97) 4 9U-8791

* Refer to Special Instructions SEHS9585 and Technical Bulletin (TIB) dated August 17, 1994 for details.

D6H XR END GUIDING GUARDS*SEALED AND LUBRICATED, HEAVY DUTY, AND ROTATING BUSHING TRACK ONLY (INCH MOUNTING HARDWARE)

(PER MACHINE) QUANTITY PART NUMBERFrontGuard Assembly 2 9U-8451Guard Assembly 2 9U-8457Bolt 16 8T-8919Washer 16 5P-1076Strip 4 9U-8456Spacer (97) 4 9U-8791RearGuard Assembly 4 9U-8786Bolt 12 8T-8919Washer 12 5P-1076Strip 4 9U-9206Spacer (97) 4 9U-9209


D6H XL END GUIDING GUARDS*SEALED AND LUBRICATED, HEAVY DUTY, AND ROTATING BUSHING TRACK ONLY (INCH MOUNTING HARDWARE)

(PER MACHINE) QUANTITY PART NUMBERFrontGuard Assembly 2 129-5036Guard Assembly 2 129-5037Bolt 12 8T-8919Washer 12 5P-1076

97 Required for Sealed and Lubricated Track for proper clearance.

97

D6T, D6R, D6HD6H XL END GUIDING GUARDS*SEALED AND LUBRICATED, HEAVY DUTY, AND ROTATING BUSHING TRACK ONLY (INCH MOUNTING HARDWARE)(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERStrip 2 8E-9922Strip 2 8E-9923Spacer (98) 4 6I-9024RearGuard Assembly 2 6I-8736Guard Assembly 2 6I-8737Bolt 16 8T-8919Washer 16 5P-1076Strip 4 9U-8456Spacer (98) 4 9U-8791


D6H LGP END GUIDING GUARDS*SEALED AND LUBRICATED, HEAVY DUTY, AND ROTATING BUSHING TRACK ONLY (INCH MOUNTING HARDWARE)

(PER MACHINE) QUANTITY PART NUMBERFrontGuard Assembly 2 9U-8451Guard Assembly 2 9U-8457Bolt 16 5C-6565Washer 16 8T-4223Strip 4 9U-8456Spacer (98) 4 9U-8791RearGuard Assembly 2 9U-8464Guard Assembly 2 9U-8459Bolt 16 5C-6565Washer 16 8T-4223Strip 4 9U-8456Spacer (98) 4 9U-8791


D6T, D6R STD SystemOne TRACK ROLLER GUARDS (FULL LENGTH)Metric Hardware

(PER MACHINE) QUANTITY PART NUMBERGuard 4 229-9556Guard 4 229-9557Tube 10 134-5366

98 Required for Sealed and Lubricated Track for proper clearance.

98

D6T, D6R, D6HD6T, D6R STD SystemOne TRACK ROLLER GUARDS (FULL LENGTH)Metric Hardware(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERRod 10 134-5368Nut 20 7Y-5233Washer 20 8T-4167Bolt (20 mm) 20 8T-4141Spacer 20 166-2287Plate 4 8E-9932Bolt (12 mm) 4 8T-4956Bolt (12 mm) 4 8T-4139Washer 8 8T-4223

D6T, D6R XL, XW, IG SystemOne TRACK ROLLER GUARDS (FULL LENGTH)Metric Hardware

(PER MACHINE) QUANTITY PART NUMBERGuard 4 229-9558Guard 4 229-9559Tube 12 134-5366Rod 12 134-5368Nut 24 7Y-5233Washer 24 8T-4167Bolt (20 mm) 24 8T-4141Spacer 24 166-2287

D6T, D6R LGP SystemOne TRACK ROLLER GUARDS (FULL LENGTH)Metric Hardware

(PER MACHINE) QUANTITY PART NUMBERGuard 4 229-9568Guard 4 229-9569Tube 14 134-5366Rod 14 134-5368Nut 28 7Y-5233Washer 28 8T-4167Bolt (20 mm) 28 8T-4141Spacer 28 166-2287Plate 4 8E-9932Bolt (12 mm) 4 8T-4956Bolt (12 mm) 4 8T-4139Washer 8 8T-4223

99

D6T, D6R, D6HD6H STD SystemOne TRACK ROLLER GUARDS (FULL LENGTH)

Inch Hardware(PER MACHINE) QUANTITY PART NUMBERGuard 4 229-9556Guard 4 229-9557Tube 10 134-5366Rod 10 134-5368Nut 20 7Y-5233Washer 20 8T-4167Bolt (3/4") 20 8C-6857Spacer 20 166-2287Plate 4 8E-9932Bolt (1/2") 4 8C-4436Bolt (1/2") 4 5C-6565Washer 8 8T-4223

D6H XL, XW, IG SystemOne TRACK ROLLER GUARDS (FULL LENGTH)Inch Hardware

(PER MACHINE) QUANTITY PART NUMBERGuard 4 229-9558Guard 4 229-9559Tube 12 134-5366Rod 12 134-5368Nut 24 7Y-5233Washer 24 8T-4167Bolt (3/4") 24 8C-6857Spacer 24 166-2287

D6H LGP SystemOne TRACK ROLLER GUARDS (FULL LENGTH)Inch Hardware

(PER MACHINE) QUANTITY PART NUMBERGuard 4 229-9568Guard 4 229-9569Tube 14 134-5366Rod 14 134-5368Nut 28 7Y-5233Washer 28 8T-4167Bolt (3/4") 28 8C-6857Spacer 28 166-2287Plate 4 8E-9932Bolt (1/2") 4 8C-4436Bolt (1/2") 4 5C-6565Washer 8 8T-4223

100

D6T, D6R, D6HD6T, D6R STD TRACK ROLLER GUARDS (FULL LENGTH)

CAST HEAVY DUTY (METRIC MOUNTING HARDWARE)

(PER MACHINE) QUANTITY PART NUMBERTrack Guide Kit 1 172-6219Guard (RH Front) 2 134-5365Guard (LH Rear) 2 134-5364Guard (LH Front) 2 134-5364Guard (RH Rear) 2 134-5365Tube 10 134-5366Rod 10 134-5368Nut 20 7Y-5233Washer 20 8T-4167Bolt 20 8T-4141Spacer 20 166-2287Plate 4 8E-9932Bolt 4 8T-4956Bolt 4 8T-4139Washer 4 8T-4223

D6R XR TRACK ROLLER GUARDS (FULL LENGTH)CAST HEAVY DUTY (METRIC MOUNTING HARDWARE)


D6T XL/XW, D6R XL/XW TRACK ROLLER GUARDS (FULL LENGTH)CAST HEAVY DUTY (METRIC MOUNTING HARDWARE)

(PER MACHINE) QUANTITY PART NUMBERTrack Guide Kit 1 172-6228Guard (RH Front) 2 134-9432Guard (LH Rear) 2 134-9431Guard (LH Front) 2 134-9431

101

D6T, D6R, D6HD6T XL/XW, D6R XL/XW TRACK ROLLER GUARDS (FULL LENGTH)CAST HEAVY DUTY (METRIC MOUNTING HARDWARE)(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERTrack Guide Kit 1 172-6228Guard (RH Rear) 2 134-9432Tube 12 134-5366Rod 12 134-5368Nut 24 7Y-5233Washer 24 8T-4167Bolt 24 8T-4141Spacer 24 166-2287

D6T, D6R LGP TRACK ROLLER GUARDS (FULL LENGTH)CAST HEAVY DUTY (METRIC MOUNTING HARDWARE)


D6H STD TRACK ROLLER GUARDS (FULL LENGTH)CAST HEAVY DUTY (INCH MOUNTING HARDWARE), FOR HEAVY DUTY AND ROTATING BUSHING TRACK

(PER MACHINE) QUANTITY PART NUMBERGuard (RH Front) 2 134-5365Guard (LH Rear) 2 134-5364Guard (LH Front) 2 134-5364Guard (RH Rear) 2 134-5365Tube 10 134-5366Rod 10 134-5368Nut 20 7Y-5233Washer 20 8T-4167Bolt 20 8C-6857Spacer 20 166-2287

102

D6T, D6R, D6HD6H STD TRACK ROLLER GUARDS (FULL LENGTH)CAST HEAVY DUTY (INCH MOUNTING HARDWARE), FOR HEAVY DUTY AND ROTATING BUSHING TRACK(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERPlate 4 8E-9932Bolt 4 8C-4436Bolt 4 5C-6565Washer 4 8T-4223

D6H XR TRACK ROLLER GUARDS (FULL LENGTH)CAST HEAVY DUTY (INCH MOUNTING HARDWARE), FOR HEAVY DUTY AND ROTATING BUSHING TRACK

(PER MACHINE) QUANTITY PART NUMBERGuard (RH Front) 2 134-9434Guard (LH Rear) 2 134-9435Guard (LH Front) 2 134-9929Guard (RH Rear) 2 134-9930Tube 12 134-5366Rod 12 134-5368Nut 24 7Y-5233Washer 24 8T-4167Bolt 24 8C-6857Spacer 24 166-2287Plate 4 8E-9932Bolt 4 8C-4436Bolt 4 5C-6565Washer 4 8T-4223

D6H XL TRACK ROLLER GUARDS (FULL LENGTH)CAST HEAVY DUTY (INCH MOUNTING HARDWARE), FOR HEAVY DUTY AND ROTATING BUSHING TRACK

(PER MACHINE) QUANTITY PART NUMBERGuard (RH Front) 2 134-9432Guard (LH Rear) 2 134-9431Guard (LH Front) 2 134-9431Guard (RH Rear) 2 134-9432Tube 12 134-5366Rod 12 134-5368Nut 24 7Y-5233Washer 24 8T-4167Bolt 24 8C-6857Spacer 24 166-2287

103

D6T, D6R, D6HD6H LGP TRACK ROLLER GUARDS (FULL LENGTH)

CAST HEAVY DUTY (INCH MOUNTING HARDWARE), FOR HEAVY DUTY AND ROTATING BUSHING TRACK

(PER MACHINE) QUANTITY PART NUMBERGuard (RH Front) 2 134-6404Guard (LH Rear) 2 134-6403Guard (LH Front) 2 134-6403Guard (RH Rear) 2 134-6404Tube 14 134-5366Rod 14 134-5368Nut 28 7Y-5233Washer 28 8T-4167Bolt 28 8C-6857Spacer 28 166-2287Plate 4 8E-9932Bolt 4 8C-4436Bolt 4 5C-6565Washer 4 8T-4223

D6R STD TRACK ROLLER GUARDS (FULL LENGTH - FABRICATED)HEAVY DUTY AND ROTATING BUSHING TRACK ONLY (METRIC MOUNTING HARDWARE) NOT FOR NACD USE

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 6I-8139Spacer (Mounting) 20 166-2287Bolt - Mounting (20 mm) 20 8T-4141Tube 6 7G-4355Rod (threaded) (16 mm) 6 110-0771Washer 12 9X-8257Nut (16 mm) 12 8T-4778Plate 4 8E-9932Bolt (12 mm) 4 8T-4956Bolt (12 mm) 4 8T-4139Washer 4 8T-4223

D6R XR TRACK ROLLER GUARDS (FULL LENGTH - FABRICATED)HEAVY DUTY AND ROTATING BUSHING TRACK ONLY (METRIC MOUNTING HARDWARE) NOT FOR NACD USE

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 9U-9201Guard Assembly 2 9U-9204Spacer (Mounting) 24 166-2287Bolt - Mounting (20 mm) 24 8T-4141Tube 8 7G-4355Rod (threaded) (16 mm) 8 110-0771Washer 16 9X-8257Nut (16 mm) 16 8T-4778

104

D6T, D6R, D6HD6R XR TRACK ROLLER GUARDS (FULL LENGTH - FABRICATED)HEAVY DUTY AND ROTATING BUSHING TRACK ONLY (METRIC MOUNTING HARDWARE) NOT FOR NACD USE(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERPlate 4 8E-9932Bolt (12 mm) 4 8T-4956Bolt (12 mm) 4 8T-4139Washer 4 8T-4223

D6R XL TRACK ROLLER GUARDS (FULL LENGTH - FABRICATED)HEAVY DUTY AND ROTATING BUSHING TRACK ONLY (METRIC MOUNTING HARDWARE) NOT FOR NACD USE

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 6I-9029Spacer (Mounting) 24 166-2287Bolt - Mounting (20 mm) 24 8T-4141Tube 8 7G-4355Rod (threaded) (16 mm) 8 110-0771Washer 16 9X-8257Nut (16 mm) 16 8T-4778

D6R LGP TRACK ROLLER GUARDS (FULL LENGTH - FABRICATED)HEAVY DUTY AND ROTATING BUSHING TRACK ONLY (METRIC MOUNTING HARDWARE) NOT FOR NACD USE

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 8E-9928Spacer (Mounting) 28 166-2287Bolt - Mounting (20 mm) 28 8T-4141Tube 8 7G-4355Rod (threaded) (16 mm) 8 110-0771Washer 16 9X-8257Nut (16 mm) 16 8T-4778Plate 4 8E-9932Bolt (12 mm) 4 8T-4956Bolt (12 mm) 4 8T-4139Washer 4 8T-4223

D6R STD, D6H STD TRACK ROLLER GUARDS (FULL LENGTH - FABRICATED)HEAVY DUTY AND ROTATING BUSHING TRACK ONLY (INCH MOUNTING HARDWARE) NOT FOR NACD USE

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 6I-8139Tube 4 7G-4355Rod 4 3W-4144Bolt 4 8C-4436Bolt 20 8C-6857

105

D6T, D6R, D6HD6R STD, D6H STD TRACK ROLLER GUARDS (FULL LENGTH - FABRICATED)HEAVY DUTY AND ROTATING BUSHING TRACK ONLY (INCH MOUNTING HARDWARE) NOT FOR NACD USE(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERWasher 8 8T-4122Washer 4 8T-4223Nut 8 6V-8181Plate 4 8E-9932Spacer 20 166-2287Bolt 4 5C-6565

D6R XR, D6H XR TRACK ROLLER GUARDS (FULL LENGTH - FABRICATED)HEAVY DUTY AND ROTATING BUSHING TRACK ONLY (INCH MOUNTING HARDWARE) NOT FOR NACD USE

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 9U-9201Guard Assembly 2 9U-9204Tube 4 7G-4355Rod 4 3W-4144Bolt 4 8C-4436Bolt 24 8C-6857Washer 8 8T-4122Washer 4 8T-4223Nut 8 6V-8181Plate 4 8E-9932Spacer 24 166-2287Bolt 4 5C-6565

D6R XL, D6H XL TRACK ROLLER GUARDS (FULL LENGTH - FABRICATED)HEAVY DUTY AND ROTATING BUSHING TRACK ONLY (INCH MOUNTING HARDWARE) NOT FOR NACD USE

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 6I-9029Tube 4 7G-4355Rod 4 3W-4144Bolt 24 8C-6857Washer 8 8T-4122Nut 8 6V-8181Spacer 24 166-2287

D6R LGP, D6H LGP TRACK ROLLER GUARDS (FULL LENGTH - FABRICATED)HEAVY DUTY AND ROTATING BUSHING TRACK ONLY (INCH MOUNTING HARDWARE) NOT FOR NACD USE

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 8E-9928Tube 4 7G-4355Rod 4 3W-4144

106

D6T, D6R, D6HD6R LGP, D6H LGP TRACK ROLLER GUARDS (FULL LENGTH - FABRICATED)HEAVY DUTY AND ROTATING BUSHING TRACK ONLY (INCH MOUNTING HARDWARE) NOT FOR NACD USE(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERBolt 4 8C-4436Bolt 28 8C-6857Washer 8 8T-4122Washer 4 8T-4223Nut 8 6V-8181Plate 4 8E-9932Spacer 28 166-2287Bolt 4 5C-6565

D6HS TD TRACK ROLLER GUARDS (FULL LENGTH - FABRICATED)SEALED AND LUBRICATED TRACK ONLY (INCH MOUNTING HARDWARE)

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 6I-9053Tube 4 7G-4355Rod 4 3W-4144Bolt 4 5C-6565Bolt 20 8C-6857Washer 8 8T-4122Washer 4 8T-4223Nut 8 6V-8181Plate 4 8E-9932Spacer 20 166-2287Bolt 4 8T-4835

D6H XR TRACK ROLLER GUARDS (FULL LENGTH - FABRICATED)SEALED AND LUBRICATED TRACK ONLY (INCH MOUNTING HARDWARE)

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 9U-9201Guard Assembly 2 9U-9204Tube 4 7G-4355Rod 4 3W-4144Bolt 4 8C-4436Bolt 24 8C-6857Washer 8 8T-4122Washer 4 8T-4223Nut 8 6V-8181Plate 4 8E-9932Spacer 24 166-2287Bolt 4 5C-6565

107

D6T, D6R, D6HD6H XL TRACK ROLLER GUARDS (FULL LENGTH - FABRICATED)

SEALED AND LUBRICATED TRACK ONLY (INCH MOUNTING HARDWARE)

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 6I-9036Tube 4 7G-4355Rod 4 3W-4144Bolt 24 8C-6857Washer 8 8T-4122Nut 8 6V-8181Spacer 24 166-2287

D6H LGP TRACK ROLLER GUARDS (FULL LENGTH - FABRICATED)SEALED AND LUBRICATED TRACK ONLY (INCH MOUNTING HARDWARE)

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 3T-5128Tube 4 7G-4355Rod 4 3W-4144Bolt 8 8C-4436Bolt 28 8C-6857Washer 8 8T-4122Washer 12 8T-4223Nut 8 6V-8181Plate 4 8G-9824Spacer 28 166-2287

D6T, D6R SystemOne CENTER GUIDING GUARDSSTD, XL, XW, IG, LGPMetric Hardware

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 206-8837Bolt (20 mm) 8 8T-4141Spacer 8 166-2287

D6H SystemOne CENTER GUIDING GUARDSSTD, XL, XW, IG, LGPInch Hardware

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 206-8837Bolt (3/4") 8 8C-6857Spacer 8 166-2287

108

D6T, D6R, D6HD6T, D6R STD/LGP/XL/XR/XW CENTER GUIDING GUARDS

ONE PIECE CAST HEAVY DUTY (METRIC MOUNTING HARDWARE)

PER MACHINE QUANTITY PART NUMBERGuard Assembly 2 268-5945Bolt (20 mm) 8 8T-4141Spacer 8 166-2287

D6R STD/LGP/XL/XR/XW CENTER GUIDING GUARDSCAST HEAVY DUTY (METRIC MOUNTING HARDWARE)

(PER MACHINE) QUANTITY PART NUMBERTrack Guide Kit 1 161-8581Guards 2 164-0403 (99)

Guards 2 164-4611 (99)

Tube 4 134-5366Rod 4 134-5368Nut 8 7Y-5233Washer 8 8T-4167Bolt (20 mm) 8 8T-4141Spacer 8 166-2287

D6H STD/LGP/XL/XR/XW CENTER GUIDING GUARDSONE PIECE CAST HEAVY DUTY (INCH MOUNTING HARDWARE)

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 268-5945Bolt (3/4") 8 8C-6857Spacer 8 166-2287

D6H STD/LGP/XL/XR CENTER GUIDING GUARDSCAST HEAVY DUTY (INCH MOUNTING HARDWARE)

(PER MACHINE) QUANTITY PART NUMBERGuards 2 164-0403 (99)

Guards 2 164-4611 (99)

Tube 4 134-5366Rod 4 134-5368Nut 8 7Y-5233Washer 8 8T-4167Bolt (3/4") 8 8C-6857Spacer 8 166-2287

99 Service replaced by 268-5945 Guard As.

109

D6T, D6R, D6HD6R STD, LGP, XL, XR, XW CENTER GUIDING GUARDS

HEAVY DUTY AND ROTATING BUSHING TRACK ONLY (FABRICATED, METRIC MOUNTING HARDWARE) NOT FOR NACD USE

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 9U-8468Bolt (20 mm) 8 8T-4141Spacer 8 166-2287

D6H STD/LGP/XL/XR CENTER GUIDING GUARDSHEAVY DUTY AND ROTATING BUSHING TRACK ONLY (FABRICATED, INCH MOUNTING HARDWARE), NOT FOR NACD USE

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 9U-8468Bolt (3/4") 8 8C-6857Spacer 8 166-2287

D6H STD/LGP/XL/XR CENTER GUIDING GUARDSSEALED AND LUBRICATED TRACK ONLY (INCH MOUNTING HARDWARE)

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 6I-9034Bolt 8 8C-6857Spacer 8 3P-4133

D6R XL, XW, IG SystemOne ROLLER END GUARDMounting position over number 2 and 6 track roller

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly Front & Rear 4 310-4269Bolt (20 mm) 16 8T-4141Spacer 16 166-2287

110

D7R, D7H, 572RD7R/H STD,XR,LGP; 572R HEAVY DUTY SEALED AND LUBRICATED TRACK*STD: 2EN1-UP, 2HR1-UP, 3ZR1-UP, 5BF5955-UP, 5MR1-UP, 79Z5895-UP, AEC1-UP, BRM1-UP, ACS1-UP, BRP1-UPXR: 2EN1-UP, 2HR1-UP, 3ZR1-UP, 5BF5955-UP, 5MR1-UP, 79Z5895-UP, ADW1-UP, BPK1-UP, AGN1-UP, BPT1-UP

LGP & 572R: 3DN1-UP, 4FG5622-UP, 4SR1-UP, 6ER1-UP, 80Z5524-UP, 9HM1-UPAFG1-UP, BNM1-UP, ABJ1-UP, BNX1-UP, 2HZ1-UP,AAC1-UP


NUMBER Sec 40 STD Sec 41 XR Sec 43 LGP Sec 46Link Assembly – (Quantity 2) 115-6301 115-6303 115-6302 123-8064 (1)

Track LinksRH Pin End Master 6I-9241 1 1 1 1LH Pin End Master 6I-9242 1 1 1 1RH Bushing End Master 6I-9243 1 1 1 1LH Bushing End Master 6I-9244 1 1 1 1RH Regular 6I-9239 39 40 42 45LH Regular 6I-9240 39 40 42 45Other ComponentsPin 115-4923 40 41 43 46Bushing 115-4924 40 41 43 46Seal Assembly (Rigid) 239-7943 80 82 86 92Thrust Ring 152-8073 80 82 86 92Stopper 7G-4332 40 41 43 46Plug 6Y-0473 40 41 43 46Track Hardware (2)

Bolt 7H-3599 156 160 168 180Bolt (Self-Cleaning Shoe) 7H-3599 – – 84 90Bolt (Self-Cleaning Shoe) 116-8145 – – 84 90Nut 2S-2140 156 160 168 180Master Bolt 9W-9058 2 2 2 2Master Bolt 6V-1723 2 2 2 2Master Bolt (Self-Cleaning Shoe) 9W-9058 – – 2 2Master Bolt (Self-Cleaning Shoe) 6V-1725 – – 2 2Special Sets/GroupsSeal Set (90 Seal Assemblies) 272-6013 1 1 1 1Bushing and Seal Group(40 Sections)

272-7103 1 1 1 1

* When installing Heavy Duty Track on machines prior to above serial number, refer to IRM UC95012 for installation and guarding information.

1 For use the machine equipped with 9 roller track roller frame.2 Not part of link assembly; required to assemble track group.

111

D7R, D7H, 572RD7R STD, D7H STD MADE TO ORDER (MTO) TRACK GROUPS


Link Assembly Used 115-6301Extreme Service Shoe – 22" (560 mm) 2 115-6307Extreme Service Shoe – 24" (610 mm) 2 383-0818

D7R/D7H XR MADE TO ORDER (MTO) TRACK GROUPSTRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIES

QUANTITY PART NUMBERLink Assembly Used 115-6303Moderate Service – 26" (660 mm) 2 115-6312Extreme Service Shoe – 24" (610 mm) 2 115-6314

D7R/D7H LGP MADE TO ORDER (MTO) TRACK GROUPSTRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIES

QUANTITY PART NUMBERLink Assembly Used 115-6302Moderate Service – 36" (915 mm) 2 115-6310

D7H/R GENERAL DUTY LINK ASSEMBLIES8.50" (215.9 mm) PITCH – 7/8" Bolt

(PER MACHINE) QTYSTD 40 SectionPart Number

XR 41 SectionPart Number

LGP 43 SectionPart Number

Link Assembly 2 422-2665 422-2666 422-2667

Utilizes Heavy Duty UC components for repair parts. Reference the UC PSK PECP3003 for more information.

D7H/R STD GENERAL DUTY TRACK GROUPSLink Assembly Used 422-2665 QUANTITY PART NUMBERModerate Service Shoe –24” (610 mm) 2 422-1129

D7H/R XR GENERAL DUTY TRACK GROUPSLink Assembly Used 422-2666 QUANTITY PART NUMBERModerate Service Shoe –24” (610 mm) 2 422-1130

D7H/R LGP GENERAL DUTY TRACK GROUPSLink Assembly Used 422-2667 QUANTITY PART NUMBERModerate Service Shoe –36” (915 mm) 2 422-1131

112

D7R, D7H, 572RD7H/R LGP GENERAL DUTY UNDERCARRIAGE ARRANGEMENTS* (TRACK GROUPS)

MACHINE CONFIGURATION QUANTITY PART NUMBERSTD 1 437-7832XR 1 437-7833LGP 1 437-7834* Undercarriage Arrangement part numbers allow for quick look up of pricing a complete General Duty Undercarriage. They are not available for purchase. (In-formation purpose only) When the Undercarriage Arrangement PN’s are placed in DBS/ANTARESSM they will provide a list of PN’s to order. Includes the partsnecessary to do a complete UC bottom replacement; sprockets and hardware, Carrier Rollers, Bottom Rollers, Idlers, and Track Groups(includes: Links Assem-blies, Shoes, and Hardware)

D7R/H STD,XR,LGP ROTATING BUSHING TRACK*STD: 2EN1-UP, 2HR1-UP, 3ZR1-UP, 5BF5955-UP, 5MR1-UP, 79Z5895-UP, AEC1-UP, BRM1-UP, ACS1-UP, BRP1-UPXR: 2EN1-UP, 2HR1-UP, 3ZR1-UP, 5BF5955-UP, 5MR1-UP, 79Z5895-UP, ADW1-UP, BPK1-UP, AGN1-UP, BPT1-UPLGP: 3DN1-UP, 4FG5622-UP, 4SR1-UP, 6ER1-UP, 80Z5524-UP, 9HM1-UP, AFG1-UP, BNM1-UP, ABJ1-UP, BNX1-UP

8.50" (215.9 mm) PITCH – 7/8" BOLT

PARTNUMBER

STD 40Section XR 41 Section LGP 43 Section 46 Section

Link Assembly – (Quantity 2) 152-8054 152-8057 152-8055 151-8863 (3)

Track LinksRH Pin End Master 6I-9241 1 1 1 1LH Pin End Master 6I-9242 1 1 1 1RH Bushing End Master (4) 165-1760 1 1 1 1LH Bushing End Master (4) 165-1761 1 1 1 1RH Regular (4) 165-1758 39 40 42 45LH Regular (4) 165-1759 39 40 42 45Other ComponentsPin 152-8080 40 41 43 46Bushing 165-1770 40 41 43 46Seal Assembly (Rigid) 239-7943 160 164 172 184Thrust Ring 152-8073 160 164 172 184Stopper 7G-4332 40 41 43 46Plug 6Y-0473 40 41 43 46Track Hardware (5)

Bolt 7H-3599 156 160 168 180Nut 2S-2140 156 160 168 180Master Bolt 6V-1723 2 2 2 2Master Bolt 9W-9058 2 2 2 2* Rotating Bushing Track is an application specific undercarriage designed for high abrassion/low impact applications (4,000 hour system life or less). When in-stalling Rotating Bushing Track on existing machines, refer to IRM UC95-15 for installation and guarding information. Also refer to Special Instruction SEHS9919for additional guarding information. For servicing information refer to Special Instruction SEHS9542. This product is not for use on Track Skidders and 561HPipelayers.

3 For use the machine equipped with 9 roller track roller frame.4 Joint assembly (Includes link and insert). Insert not serviced.5 Not part of link assembly; required to assemble track group.

113

D7R, D7H, 572RD7H STD,XR,LGP HYBRID TRACKD7H STD (40 SECTION): 79Z1-5894, 5BF1-5954D7H XR (41 SECTION): 79Z1-5894, 5BF1-5954D7H LGP (43 SECTION): 80Z1-5523, 4FG1-5621


NUMBER Sec 40 STD Sec 41 XR Sec 43 LGPLink Assembly – (Quantity 2) 291-1612 (6) 291-1613 (6) 291-1615 (6)

Track LinksRH Pin End Master 255-4791 1 1 1LH Pin End Master 255-4792 1 1 1RH Bushing End Master 255-4793 1 1 1LH Bushing End Master 255-4794 1 1 1RH Regular 289-3083 39 40 42LH Regular 289-3084 39 40 42Other ComponentsPin 199-2794 40 41 43Bushing 237-3790 40 41 43Seal Assembly (Rigid) 251-1659 80 82 86Thrust Ring 152-8073 80 82 86Stopper 7G-4332 40 41 43Plug 6Y-0473 40 41 43Track Hardware (7)

Bolt 7H-3599 156 160 168Nut 7T-9825 156 160 168Master Bolt 9W-9058 4 4 4Special Sets/GroupsSeal Set (86 Seal Assemblies) 251-1660 1 1 1Bushing and Seal Group (40 Sections) 261-2353 1 1 1

D7H STD,XR,LGP SEALED AND LUBRICATED TRACKD7H STD (40 SECTION): 79Z1-5894, 5BF1-5954D7H XR (41 SECTION): 79Z1-5894, 5BF1-5954D7H LGP (43 SECTION): 80Z1-5523, 4FG1-5621


NUMBER Sec 40 STD Sec 41 XR Sec 43 LGPLink Assembly (Quantity 2) – (8) – (9) – (10)

Track LinksRH Pin End Master 9G-2419 1 1 1

6 Track shoes with 7/8 bolts are required, refer to table titled "D7H Hybrid Track Shoes" for selections.7 Not part of link assembly; required to assemble track group.8 Serviced replaced by hybrid link assembly 291-1612 and new track shoes with 7/8 bolts, refer to table titled "D7H Hybrid Track Shoes" for

selections.9 Serviced replaced by hybrid link assembly 291-1613 and new track shoes with 7/8 bolts, refer to table titled "D7H Hybrid Track Shoes" for

selections.10 Serviced replaced by hybrid link assembly 291-1615 and new track shoes with 7/8 bolts, refer to table titled "D7H Hybrid Track Shoes" for

selections.

114

D7R, D7H, 572RD7H STD,XR,LGP SEALED AND LUBRICATED TRACKD7H STD (40 SECTION): 79Z1-5894, 5BF1-5954D7H XR (41 SECTION): 79Z1-5894, 5BF1-5954D7H LGP (43 SECTION): 80Z1-5523, 4FG1-56218.50" (215.9 mm) PITCH – 3/4" BOLT(Cont'd.)

PARTNUMBER Sec 40 STD Sec 41 XR Sec 43 LGP

Link Assembly (Quantity 2) – (8) – (9) – (10)

LH Pin End Master 9G-2420 1 1 1RH Bushing End Master 9G-2421 1 1 1LH Bushing End Master 9G-2422 1 1 1RH Regular 9G-2417 39 40 42LH Regular 9G-2418 39 40 42Other ComponentsPin 199-2794 40 41 43Bushing 237-3790 40 41 43Seal Assembly (Rigid) 251-1659 80 82 86Thrust Ring 152-8073 80 82 86Stopper 7G-4332 40 41 43Plug 6Y-0473 40 41 43Track Hardware (11)

Bolt 6V-1792 156 160 168Bolt (Self-Cleaning Shoe) 6T-2162 84Bolt (Self-Cleaning Shoe) 6V-1792 84Nut 1S-1860 156 160 168Master Bolt (Long) 2P-9670 2 2 2Master Bolt (Short) 6V-1793 2 2 2Master Bolt (Self-Cleaning Shoe) 2P-9670 2Master Bolt (Self-Cleaning Shoe) 6T-1441 2Special Sets/GroupsSeal Set (86 Seal Assemblies) 251-1660 1 1 1Bushing and Seal Group (40 Sections) 261-2353 1 1 1

8 Serviced replaced by hybrid link assembly 291-1612 and new track shoes with 7/8 bolts, refer to table titled "D7H Hybrid Track Shoes" forselections.




115

D7R, D7H, 572RD7R, D7H TRACK SHOES

GENERAL DUTY, HEAVY DUTY, AND ROTATING BUSHING TRACK8.50" (215.9 mm) PITCH – 7/8" BOLT


TRAP HOLE SHOEPART NUMBER STD XR LGP

Extreme Service 20.0" (510 mm) 326-1135 – Y Y NExtreme Service 22.0" (560 mm) 326-1136 326-1137 Y Y NExtreme Service 24.0" (610 mm) 326-1138 326-1139 Y Y NExtreme Service 26.0" (660 mm) 326-1140 326-1141 Y Y NExtreme Service 30.0" (760 mm) – 326-1142 N N YExtreme Service 36.0" (915 mm) 326-1143 326-1144 N N YModerate Service 22.0" (560 mm) 326-1126 – Y Y NModerate Service 24.0" (610 mm) 326-1127 326-1128 Y Y NModerate Service 26.0" (660 mm) 326-1129 326-1130 Y Y NModerate Service 28.0" (710 mm) 326-1131 326-1132 N N YModerate Service 30.0" (760 mm) 326-1133 – N N YModerate Service 36.0" (915 mm) 326-1134 – N N YDouble Grouser 20.0" (510 mm) 170-3823 – Y Y NDouble Grouser 22.0" (560 mm) – 129-9204 Y Y NDouble Grouser 27.0" (675 mm) 170-3827 – N N YSelf-Cleaning 36.0" (915 mm) 115-6315 – N N YChopper 24.0" (610 mm) – 8E-9799 Y Y N

572R TRACK SHOESHEAVY DUTY TRACK

8.50" (215.9 mm) PITCH–7/8' BOLTType WIDTH PART NUMBERModerate Service 26.0" (660 mm) 326-1129Moderate Service 30.0" (760 mm) 326-1133Moderate Service (Clip) (12) 30.0" (760 mm) 8E-9399

D7H HYBRID TRACK SHOES8.50" (215.9 mm) PITCH – 7/8" BOLT


MASTER SHOEPART NUMBER STD XR LGP

Extreme Service 20.0" (510 mm) 317-9450 317-9451 Y Y NExtreme Service(Trapezoidal Opening)

20.0" (510 mm) 321-7448 321-7449 Y Y N

Extreme Service 22.0" (560 mm) 317-9444 317-9445 Y Y NExtreme Service 24.0" (610 mm) 376-1254 376-1253 Y Y NExtreme Service 26.5" (675 mm) 331-3629 331-3630 Y Y NExtreme Service(Trapezoidal)

26.5" (675 mm) 321-7454 321-7455 Y Y N

12 Clipped grouser edges; reduces snag loading.

116

D7R, D7H, 572RD7H HYBRID TRACK SHOES8.50" (215.9 mm) PITCH – 7/8" BOLT(Cont'd.)


MASTER SHOEPART NUMBER STD XR LGP

Moderate Service(Trapezoidal Opening) (13)

20.0" (510 mm) 1Q-4965 1Q-4964 Y Y N

Moderate Service 22.0" (560 mm) 376-1272 376-1273 Y Y NModerate Service 24.0" (610 mm) 376-1274 376-1275 Y Y NModerate Service 26.0" (660 mm) 376-1276 376-1277 Y Y NModerate Service 30.0" (760 mm) 376-1280 334-5804 N N YModerate Service 36.0" (915 mm) 376-1278 376-1279 N N YDouble Grouser 20.0" (510 mm) 8E-4416 8E-4417 Y Y NDouble Grouser 24.0" (610 mm) 8E-4427 1Q-4669 Y N NChopper(Trapezoidal Opening)

20.0" (510 mm) 8E-8323 8E-8324 Y Y N

D7H/R GENERAL DUTY SHOESTrack Groups have Moderate Service shoes that are not serviced, Heavy Duty Moderate Service shoes are avail-able for use on link assemblies. Refer to the table above for more information on offerings.

D7R, D7H, 572R SPROCKETS(PER SIDE) QUANTITY PART NUMBERSprocket Segment (Tough Steel) (5 Tooth) (14) 5 314-5462Bolt 35 5P-7665Nut 35 7H-3608Washer 35 6V-5841

D7H/R GENERAL DUTY SPROCKETS SEGMENTS(PER SIDE) QUANTITY PART NUMBERSprocket (25 Tooth) 5 397-9557Bolt 7/8” 35 5P-7665Nut 35 7H-3608Washer 35 6V-5841

13 To replace less than the full track group of shoe, use 22” MS Shoe, cut to length (20”) and cut trap hole. Replace all shoes in track groupwith 20” ES Trap Shoes.

14 Refer to REHS3373 for instruction about adding holes to hub.

117

D7R, D7H, 572RD7R STD/LGP, D7H STD/LGP, 572R IDLERS

SYMMETRIC SEAL, 12 BOLT RETAINER

(PER MACHINE) QUANTITYFABRICATED DESIGNPART NUMBER

CAST SINGLE WEBDESIGN PART NUMBER

Group (Large Tread Diameter 628 mm) 4 – (15) 192-0220

Components of GroupIdler Assembly 1 192-0219 192-0220Bearing (16) 2 6Y-1757 6Y-1757Shaft 1 131-3935 131-3935Collar 2 107-3945 107-3945Retainer 2 192-0213 192-0213Thrust Washer (17) 1 8E-6619 8E-6619Bolt 24 5P-9681 5P-9681Washer 24 3K-6113 3K-6113Seal – Duo-Cone Group (Symmetric) 2 162-7862 162-7862Toric Ring (16) 2 162-2166 162-2166Seal – Retainer 2 2H-9247 2H-9247Seal – Collar 2 7J-2036 7J-2036Stopper 1 9G-5664 9G-5664Plug 1 6Y-0473 6Y-0473Mounting Hardware (18)

End Cap (Abutment Style) 2 131-1647 131-1647Block 2 8E-8648 8E-8648Bolt (7/8") (D7R) 4 9S-1322 9S-1322Bolt (7/8") (D7H) 4 1D-4634 1D-4634Washer 4 5P-8249 5P-8249Shim D7R (Front Idlers Only) 2 131-8207 131-8207Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group (Symmetric) 2 107-4889 107-4889Toric Ring (16) 2 9M-9730 9M-9730

D7R STD/LGP, D7H STD/LGP, 572R IDLERSSYMMETRIC SEAL, 8 BOLT RETAINER



Group (Large Tread Diameter 628 mm) 4 – (19) – (20)

Components of Group

15 Order 192-0220 Idler Group.16 Component of preceding assembly or group; quantity shown is per assembly or group.17 Use (1) 9G9341 Thrust Washer and (4) 2H-1190 Dowels to repair former 9G-9345 Retainer Assembly. Use (1) 7T-2092 Thrust Washer and

(4) 2H-1190 Dowels to repair former 6Y-1802 Retainer Assembly. DO NOT DRILL AND DOWEL NEW 8E-7510 and 8E-6619 Thrust Washers.See Special Instruction SEHS8515.

18 These components are not part of Idler Group; quantities required to mount each idler.19 Idler Group 161-5792 replaced by 192-0220.20 Idler Group 159-2086 replaced by 192-0216.

118

D7R, D7H, 572RD7R STD/LGP, D7H STD/LGP, 572R IDLERSSYMMETRIC SEAL, 8 BOLT RETAINER(Cont'd.)



Group (Large Tread Diameter 628 mm) 4 – (19) – (20)

Idler Assembly 1 – (21) – (22)

Bearing (23) 2 6Y-1757 6Y-1757Shaft 1 131-3935 131-3935Collar 2 107-3945 107-3945Retainer 2 131-3932 131-3932Thrust Washer (24) 1 8E-6619 8E-6619Bolt 16 0T-0320 0T-0320Washer 16 3K-6113 3K-6113Seal – Duo-Cone Group (Symmetric) 2 162-7862 162-7862Toric Ring (23) 2 162-2166 162-2166Seal – Retainer 2 2H-9247 2H-9247Seal – Collar 2 7J-2036 7J-2036Stopper 1 9G-5664 9G-5664Plug 1 6Y-0473 6Y-0473Mounting Hardware (25)

End Cap (Abutment Style) 2 131-1647 131-1647Block 2 8E-8648 8E-8648Bolt (7/8") (D7R) 4 9S-1322 9S-1322Bolt (7/8") (D7H) 4 1D-4634 1D-4634Washer 4 5P-8249 5P-8249Shim D7R (Front Idlers Only) 2 131-8207 131-8207Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group (Symmetric) 2 107-4889 107-4889Toric Ring (23) 2 9M-9730 9M-9730

D7R, D7H, XR IDLERSSYMMETRIC SEAL, 12 BOLT RETAINER


Group (Small Tread Diameter 585 mm) 4 192-0224

Components of Group

19 Idler Group 161-5792 replaced by 192-0220.20 Idler Group 159-2086 replaced by 192-0216.21 Idler Assembly 6Y-2033 replaced by (1) 192-0220 Idler Assembly, (2) 192-0213 Retainer and (24) 5P-9681 Bolts.22 Idler Assembly 159-2084 replaced by (1) 192-0220 Idler Assembly, (2) 192-0213 Retainer and (24) 5P-9681 Bolts.23 Component of preceding assembly or group; quantity shown is per assembly or group.24 Use (1) 9G-9341 Thrust Washer and (4) 2H-1190 Dowels to repair former 9G-9345 Retainer Assembly. Use (1) 7T-2092 Thrust Washer and

(4) 2H-1190 Dowels to repair former 6Y-1802 Retainer Assembly. DO NOT DRILL AND DOWEL NEW 8E-7510 and 8E-6619 Thrust Washers.See Special Instruction SEHS8515.

25 These components are not part of Idler Group; quantities required to mount each idler.

119

D7R, D7H, 572RD7R, D7H, XR IDLERSSYMMETRIC SEAL, 12 BOLT RETAINER(Cont'd.)


Group (Small Tread Diameter 585 mm) 4 192-0224

Idler Assembly 1 192-0223Bearing (26) 2 6Y-1757Shaft 1 131-3935Collar 2 107-3945Retainer 2 192-0213Thrust Washer (27) 1 8E-6619Bolt 24 5P-9681Washer 24 3K-6113Seal – Duo-Cone Group (Symmetric) 2 162-7862Toric Ring (26) 2 162-2166Seal – Retainer 2 2H-9247Seal – Collar 2 7J-2036Stopper 1 9G-5664Plug 1 6Y-0473Mounting Hardware (28)

End Cap (Abutment Style) 2 131-1647Block 2 165-6942Bolt (7/8") 4 1D-5976Washer 4 5P-8249Shim (D7R Front Idlers Only) 2 131-8207Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group (Symmetric) 2 107-4889Toric Ring (26) 2 9M-9730

D7R D7H, XR IDLERSSYMMETRIC SEAL, 8 BOLT RETAINER


Group (Small Tread Diameter 585 mm) 4 – (29)

Components of GroupIdler Assembly 1 – (30)

Bearing (26) 2 6Y-1757

26 Component of preceding assembly or group; quantity shown is per assembly or group.27 Use (1) 9G9341 Thrust Washer and (4) 2H1190 Dowels to repair former 9G9345 Retainer Assembly. Use (1) 7T2092 Thrust Washer and (4)

2H1190 Dowels to repair former 6Y1802 Retainer Assembly. DO NOT DRILL AND DOWEL NEW 8E-7510 and 8E-6619 Thrust Washers. SeeSpecial Instruction SEHS8515.

28 These components are not part of Idler Group; quantities required to mount each idler.29 Idler Group 135-9896 replaced by 192-0224.30 Idler Assembly 6Y-2030 replaced by (1) 192-0223 Idler Assembly, (2) 192-0213 Retainer, and (24) 5P-9681 Bolts.

120

D7R, D7H, 572RD7R D7H, XR IDLERSSYMMETRIC SEAL, 8 BOLT RETAINER(Cont'd.)


Group (Small Tread Diameter 585 mm) 4 – (29)

Shaft 1 131-3935Collar 2 107-3945Retainer 2 131-3932Thrust Washer (31) 1 8E-6619Bolt 16 0T-0320Washer 16 3K-6113Seal – Duo-Cone Group (Symmetric) 2 162-7862Toric Ring (32) 2 162-2166Seal – Retainer 2 2H-9247Seal – Collar 2 7J-2036Stopper 1 9G-5664Plug 1 6Y-0473Mounting Hardware (33)


D7H/R GENERAL DUTY IDLERSSTD/LGP


D7H/R GENERAL DUTY IDLERSXR


29 Idler Group 135-9896 replaced by 192-0224.31 Use (1) 9G9341 Thrust Washer and (4) 2H1190 Dowels to repair former 9G9345 Retainer Assembly. Use (1) 7T2092 Thrust Washer and (4)


32 Component of preceding assembly or group; quantity shown is per assembly or group.33 These components are not part of Idler Group; quantities required to mount each idler.

121

D7R, D7H, 572RD7R STD/LGP, D7H STD/LGP, LANDFILL/SPECIAL APPLICATION IDLERS


(PER MACHINE) QUANTITYCAST SINGLE WEB

DESIGN PART NUMBERGroup 4 197-7754

Components of GroupIdler Assembly 1 192-0219Bearing (34) 2 6Y-1757Shaft 1 131-3935Collar 2 166-3317Retainer 2 197-7752Thrust Washer (35) 1 8E-6619Bolt 24 6K-3772Washer 24 3K-6113Plate 2 197-7753Seal – Duo-Cone Group (Symmetric) 2 162-7862Toric Ring (34) 2 162-2166Seal – Retainer 2 2H-9247Seal – Collar 2 7J-2036Stopper 1 9G-5664Plug 1 6Y-0473Mounting Hardware (36)

End Cap (Abutment Style) 2 131-1647Block 2 8E-8648Bolt (7/8") (D7R) 4 9S-1322Bolt (7/8") (D7H) 4 1D-4634Washer 4 5P-8249Shim D7R (Front Idlers Only) 2 131-8207Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group (Symmetric) 2 107-4889Toric Ring (34) 2 9M-9730

D7R STD, D7R LGP, D7H STD, D7H LGP LANDFILL/SPECIAL APPLICATION IDLERSSYMMETRIC SEAL, 8 BOLT RETAINER


DESIGN PART NUMBERGroup 4 – (37)

Components of Group



36 These components are not part of Idler Group; quantities required to mount each idler.37 Idler Group 166-4429 replaced by 197-7754.

122

D7R, D7H, 572RD7R STD, D7R LGP, D7H STD, D7H LGP LANDFILL/SPECIAL APPLICATION IDLERSSYMMETRIC SEAL, 8 BOLT RETAINER(Cont'd.)


DESIGN PART NUMBERGroup 4 – (37)

Idler Assembly 1 – (38)

Bearing (39) 2 6Y-1757Shaft 1 131-3935Collar 2 166-3317Retainer 2 166-3316Thrust Washer (40) 1 8E-6619Bolt 16 8C-6877Washer 16 8T-5360Plate 2 166-3315Seal 2 166-3318Seal – Duo-Cone Group (Symmetric) 2 162-7862Toric Ring (39) 2 162-2166Seal – Retainer 2 2H-9247Seal – Collar 2 7J-2036Stopper 1 9G-5664Plug 1 6Y-0473Mounting Hardware (41)

End Cap (Abutment Style) 2 131-1647Block 2 8E-8648Bolt (7/8") (D7R) 4 9S-1322Bolt (7/8") (D7H) 4 1D-4634Washer 4 5P-8249Shim D7R (Front Idlers Only) 2 131-8207Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group (Symmetric) 2 107-4889Toric Ring (39) 2 9M-9730

37 Idler Group 166-4429 replaced by 197-7754.38 Idler Assembly 159-2084 replaced by (1) 192-0215 Idler Assembly, (2) 197-7752 Retainer, (2) 197-7753 Plates, (24) 6K-3772 Bolts, (24) 3K-

6113 Washer.39 Component of preceding assembly or group; quantity shown is per assembly or group.40 Use (1) 9G9341 Thrust Washer and (4) 2H1190 Dowels to repair former 9G9345 Retainer Assembly. Use (1) 7T2092 Thrust Washer and (4)



123

D7R, D7H, 572RD7R D7H, XR LANDFILL/SPECIAL APPLICATION IDLERS


(PER MACHINE) QUANTITY FABRICATED DESIGN PART NUMBERGroup 4 198-6726

Components of GroupIdler Assembly 1 192-0223Bearing (42) 2 6Y-1757Shaft 1 131-3935Collar 2 166-3317Retainer 2 197-7752Thrust Washer (43) 1 8E-6619Bolt 24 6K-3772Washer 24 3K-6113Plate 2 197-7753Seal 4 166-3318Seal – Duo-Cone Group (Symmetric) 2 162-7862Toric Ring (42) 2 162-2166Seal – Retainer 2 2H-9247Seal – Collar 2 7J-2036Stopper 1 9G-5664Plug 1 6Y-0473Mounting Hardware (44)


D7R D7H, XR LANDFILL/SPECIAL APPLICATION IDLERSSYMMETRIC SEAL DESIGN, 8 BOLT RETAINER

(PER MACHINE) QUANTITY FABRICATED DESIGN PART NUMBERGroup 4 – (45)




44 These components are not part of Idler Group; quantities required to mount each idler.45 Idler Group 170-1104 replaced by 198-672646 Idler Assembly 6Y-2030 replaced by (1) 192-0223 Idler Assembly, (2) 197-7752 Retainer, (2) 197-7753 Plate, (24) 6K3772 Bolts, (24) 3K6113

Washers.

124

D7R, D7H, 572RD7R D7H, XR LANDFILL/SPECIAL APPLICATION IDLERSSYMMETRIC SEAL DESIGN, 8 BOLT RETAINER(Cont'd.)(PER MACHINE) QUANTITY FABRICATED DESIGN PART NUMBERGroup 4 – (45)

Bearing (47) 2 6Y-1757Shaft 1 131-3935Collar 2 166-3317Retainer 2 166-3316Thrust Washer (48) 1 8E-6619Bolt 24 8C-6877Washer 24 8T-5360Plate 2 166-3315Seal 4 166-3318Seal – Duo-Cone Group (Symmetric) 2 162-7862Toric Ring (47) 2 162-2166Seal – Retainer 2 2H-9247Seal – Collar 2 7J-2036Stopper 1 9G-5664Plug 1 6Y-0473Mounting Hardware (49)


D7R, D7H CENTER TREAD IDLER*12 BOLT RETAINER

USE WITH ROTATING BUSHING TRACK(PER MACHINE) QUANTITY PART NUMBERGroup 4 249-2939

Components of GroupIdler Assembly 1 249-2940Bearing (47) 2 6Y-1757Shaft 1 131-3935

45 Idler Group 170-1104 replaced by 198-672647 Component of preceding assembly or group; quantity shown is per assembly or group.48 Use (1) 9G9341 Thrust Washer and (4) 2H1190 Dowels to repair former 9G9345 Retainer Assembly. Use (1) 7T2092 Thrust Washer and (4)



125

D7R, D7H, 572RD7R, D7H CENTER TREAD IDLER*12 BOLT RETAINERUSE WITH ROTATING BUSHING TRACK(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERGroup 4 249-2939Retainer 2 192-0213 (50)

Thrust Washer 2 8E-6619Collar 2 107-3945Bolt 24 5P-9681Washer 24 3K-6113Seal – Duo-Cone Group (Symmetric) 2 162-7862Toric Ring (51) 2 162-2166Seal – Retainer 2 2H-9247Seal – Collar 2 7J-2036Stopper 1 9G-5664Plug 1 6Y-0473Mounting Hardware D7H STD, LGP (52)

End Cap (Abutment Style)(RH) 1 173-7653

End Cap (Abutment Style)(LH) 1 173-7652

Block (RH) 1 173-7656Block (LH) 1 173-7657Shim 2 173-7660Bolt (7/8") 4 9S-1322Washer (7/8") 4 5P-8249Mounting Hardware D7R STD, LGP (52)

End Cap (Abutment Style)(RH) 1 173-7653End Cap (Abutment Style)(LH) 1 173-7652

Block (RH) 1 173-7658Block (LH) 1 173-7659Shim (Rear) 2 192-0811Shim (Front) 2 173-7660Bolt (7/8") 4 6J-1536Washer (7/8") 4 5P-8249

* Complete kits available for machine retrofit: D7H STD (164-3335), D7H LGP (164-3336), D7R STD (169-4234), D7R LGP (169-4236).

50 If 8 bolt retainer is required order 131-3932.51 Component of preceding assembly or group; quantity shown is per assembly or group.52 These components are not part of Idler Group; quantities required to mount each idler.

126

D7R, D7H, 572RD7R D7H, LGP IDLERS

9 ROLLER FRAME(PER MACHINE) QUANTITY FORMER PART NUMBER PART NUMBERGroup (Tread Diameter 605 mm) 4 – –

Components of GroupIdler Assembly 1 – (53) – (53)

Bearing (54) 2 6Y-1757 6Y-1757Shaft 1 6Y-1756 131-3935Retainer Assembly 2 – –

Retainer 2 108-0041 131-3932Thrust Washer 2 8E-6619 8E-6619Collar 2 – 107-3945Bolt 16 4F-8965 0T-0320Washer 16 – 3K-6113Stabilizer Ring 2 6T-4871 –

Seal – Duo-Cone Group (Symmetric) 2 – 162-7862Toric Ring (54) 2 – 162-2166Seal – Duo-Cone Group (Inverted) 2 7T-0158 –

Toric Ring (54) 1 6P-8912 –

O-Ring (54) 1 6V-2701 –

Seal – Retainer 2 2H-9247 2H-9247Seal – Collar 2 – 7J-2036Stopper 1 9G-5664 9G-5664Plug 1 6Y-0473 6Y-0473Mounting Hardware (55)

End Cap 2 131-1647 131-1647Block (Front Idler) 2 8E-8648 8E-8648Block (Rear Idler) 2 6Z-8243 6Z-8243Bolt (Front) 4 1D-4634 1D-4634Bolt (Rear) 4 9S-1322 9S-1322Washer 4 5P-8249 5P-8249

D7H STD/LGP IDLERSFORMER DESIGN, LARGE TREAD DIAMETER, LARGE BEARING



Group (Tread Diameter 628 mm) 4 – –

Components of GroupIdler Assembly 1 – (56) – (57)

53 Idler Assembly 3Q-3873 Replaced by (1) 195-9816 Idler Assembly, (2) 192-0213 Retainers, (24) 5P-9681 Bolt, (24) 3K-6113 Washer54 Component of preceding assembly or group; quantity shown is per assembly or group.55 These components are not part of Idler Group; quantities required to mount each idler.56 Idler Assembly 6Y-2033 Replaced by (1) 192-0219 Idler Assembly, (2) 192-0213 Retainer and (24) 5P-9681 Bolts.57 Idler Assembly 159-2084 Replaced by (1) 192-0215 Idler Assembly, (2) 192-0213 Retainer and (24) 5P-9681 Bolts.

127

D7R, D7H, 572RD7H STD/LGP IDLERSFORMER DESIGN, LARGE TREAD DIAMETER, LARGE BEARING(Cont'd.)



Group (Tread Diameter 628 mm) 4 – –

Bearing (58) 2 6Y-1757 6Y-1757Shaft 1 6Y-1756 6Y-1756Retainer 2 108-0041 108-0041Thrust Washer (59) 1 8E-6619 8E-6619Bolt 16 0T-0320 0T-0320Washer 16 3K-6113 3K-6113Stabilizer Ring 2 6T-4871 6T-4871Seal – Duo-Cone Group (Inverted) 2 7T-0158 7T-0158Toric Ring (58) 1 6P-8912 6P-8912O-Ring (58) 1 6V-2701 6V-2701Seal – Retainer 2 2H-9247 2H-9247Stopper 1 9G-5664 9G-5664Plug 1 6Y-0473 6Y-0473Mounting Hardware (60)

End Cap (Abutment Style) 2 131-1647 131-1647Block 2 8E-8648 8E-8648Bolt (7/8") (D7R) 4 9S-1322 9S-1322Bolt (7/8") (D7H) 4 1D-4634 1D-4634Washer 4 5P-8249 5P-8249Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 7T-5133 7T-5133Toric Ring (58) 1 7T-1094 7T-1094O-Ring (58) 1 6V-2701 6V-2701

D7H XR IDLERSFORMER DESIGN, SMALL TREAD DIAMETER, LARGE BEARING

(PER MACHINE) QUANTITY FABRICATED DESIGN PART NUMBERGroup (Tread Diameter 585 mm) 4 –


Bearing (58) 2 6Y-1757Shaft 1 6Y-1756



60 These components are not part of Idler Group; quantities required to mount each idler.61 Idler Assembly 6Y-2030 Replaced by (1) 192-0223 Idler Assembly, (2) 192-0213 Retainer and (24) 5P-9681 Bolts.

128

D7R, D7H, 572RD7H XR IDLERSFORMER DESIGN, SMALL TREAD DIAMETER, LARGE BEARING(Cont'd.)(PER MACHINE) QUANTITY FABRICATED DESIGN PART NUMBERGroup (Tread Diameter 585 mm) 4 –

Retainer 2 108-0041Thrust Washer (62) 1 8E-6619Bolt 16 0T-0320Washer 16 3K-6113Stabilizer Ring 2 6T-4871Seal – Duo-Cone Group (Inverted) 2 7T-0158Toric Ring (63) 1 6P-8912O-Ring (63) 1 6V-2701Seal – Retainer 2 2H-9247Stopper 1 9G-5664Plug 1 6Y-0473Mounting Hardware (64)

End Cap (Abutment Style) 2 131-1647Block 2 165-6942Bolt (7/8") 4 1D-5976Washer 4 5P-8249Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 7T-5133Toric Ring (63) 1 7T-1094O-Ring (63) 1 6V-2701

D7H STD/LGP/XR IDLERSEARLY DESIGN, SMALL BEARING

(PER MACHINE) QUANTITY FABRICATED DESIGN PART NUMBERGroup 4 –

Components of GroupIdler Assembly 1 –

Bearing (63) 2 –

Shaft 1 6T-1355Retainer 2 9G-9344Thrust Washer (62) 1 8E-7510Bolt 24 1T-0720Washer 24 5M-2894Stabilizer Ring 2 6T-4871

62 Use (1) 9G9341 Thrust Washer and (4) 2H1190 Dowels to repair former 9G9345 Retainer Assembly. Use (1) 7T2092 Thrust Washer and (4)2H1190 Dowels to repair former 6Y1802 Retainer Assembly. DO NOT DRILL AND DOWEL NEW 8E-7510 and 8E-6619 Thrust Washers. SeeSpecial Instruction SEHS8515.

63 Component of preceding assembly or group; quantity shown is per assembly or group.64 These components are not part of Idler Group; quantities required to mount each idler.

129

D7R, D7H, 572RD7H STD/LGP/XR IDLERSEARLY DESIGN, SMALL BEARING(Cont'd.)(PER MACHINE) QUANTITY FABRICATED DESIGN PART NUMBERGroup 4 –

Seal – Duo-Cone Group (Inverted) 2 7T-0158Toric Ring (65) 1 6P-8912O-Ring (65) 1 6V-2701Seal – Retainer 2 5F-3106Stopper 1 9G-5664Plug 1 6Y-0473Mounting Hardware (66)

End Cap (Abutment Style) 2 131-1647Block 2 8E-8648Bolt (7/8") 4 1D-4634Washer 4 5P-8249Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 7T-5133Toric Ring (65) 1 7T-1094O-Ring (65) 1 6V-2701

D7R, D7H, 572R HEAVY DUTY AND GENERAL DUTY CARRIER ROLLERS(PER MACHINE) QUANTITY PART NUMBERGroup 2 428-0056

Special Application GroupsGroup (Steel Mill) 4 2P-3514Seal – Duo-Cone Group (Steel Mill) 1 4S-8984Toric Ring (67) 2 9M-9730Group (Arctic) 4 255-8882

Seal – Duo-Cone Group (Arctic) 1 171-5882Toric Ring (67) 2 162-2166

D7R D7H STD/LGP/XR, 572R TRACK ROLLERSCURRENT DESIGN



65 Component of preceding assembly or group; quantity shown is per assembly or group.66 These components are not part of Idler Group; quantities required to mount each idler.67 Component of preceding group; quantity shown is the quantity per group.68 8 DF Roller Groups required on XR machines.

130

D7R, D7H, 572RD7R D7H STD/LGP/XR, 572R TRACK ROLLERSCURRENT DESIGN(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERDouble Flange (DF) - Tall Flange – (69) 323-5931Mounting Hardware (70)

Cap 2 273-3996Bolt (7/8") 4 1D–4630Washer 4 9H-1031Special Application Roller GroupsDouble Flange (DF) (Arctic) 6 (71) 339-6073Single Flange (SF) (Arctic) 8 339-6072

D7H/R GENERAL DUTY ROLLERS WITH END CAPSQUANTITYPER MACHINE PART NUMBER

Single Flange Roller 8 422-1054Double Flange Roller (72) 6 (72) 422-1051Roller Hardware(D7H/R) (73)

Cap (74) 2 273-3996Bolt – (7/8”) 4 1D-4630Washer 4 9H-1031

D7H STD/LGP/XR TRACK ROLLERSFORMER DESIGN (BOLT-ON RETAINER)



Components of GroupRoller Shell (DF) 1 9W-5581 (75)

Roller Shell (SF) 1 9W-5582 (76)

Bearing (77) 2 9W-9498Shaft 1 3T-7392

69 Optional DF roller for guiding: use quantity required for specific roller frame type.70 These components are not included in the roller group. Quantities shown are required to mount each roller.71 8 DF Roller Groups required on XR machines.72 8 - DF rollers for XR machines.73 These components are not included in the roller group; quantities shown are required to mount each roller.74 Caps only required if machine had old style rollers.75 Serviced Replaced By: 1 - Roller Group (DF) 323-5928, 2 - End Cap 273-3996, 4 - Bolt 1D-4630, 4 - Washer 9H-1031.76 Serviced Replaced By: 1 - Roller Group (SF) 323-5925, 2 - End Cap 273-3996, 4 - Bolt 1D-4630, 4 - Washer 9H-1031.77 Component of preceding assembly or group; quantity shown is per assembly or group.

131

D7R, D7H, 572RD7H STD/LGP/XR TRACK ROLLERSFORMER DESIGN (BOLT-ON RETAINER)(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERRetainer 2 9W-6632Thrust Washer (78) 2 8E-7510Bolt (Retainer) 12 0S-1595Washer (Retainer) 12 5P-8245Stabilizer Ring 2 6T-4871Seal – Duo-Cone Group 2 7T-0158Toric Ring (79) 1 6P-8912O-Ring (79) 1 6V-2701Seal – Retainer O-Ring 2 5F-3106Stopper 1 7G-4332Plug 1 6Y-0473Mounting Hardware (80)

End Cap 2 6T-5114Bolt (7/8") 4 2H-3856Washer 4 4M-6953Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 7T-5133Toric Ring (79) 1 7T-1094O-Ring (79) 1 6V-2701Retainer O-Ring 2 4S-5898Stopper 2 3T-3800Plug 2 3T-3799

D7R, D7H END GUIDING GUARDSHEAVY DUTY AND ROTATING BUSHING TRACK (STD, XR, LGP)

(PER MACHINE) QUANTITY PART NUMBERFront (Guard Assembly)Right Outer, Left Inner 2 165-7574Left Outer, Right Inner 2 165-7576Wear Strip 4 165-7211Bolt 12 7X-0343Washer 12 8T-4122Rear (Guard Assembly)Right Outer, Left Inner 2 165-7574

78 Use (1) 9G9341 Thrust Washer and (4) 2H1190 Dowels to repair former 9G9345 Retainer Assembly. Use (1) 7T2092 Thrust Washer and (4)2H1190 Dowels to repair former 6Y1802 Retainer Assembly. DO NOT DRILL AND DOWEL NEW 8E-7510 Thrust Washer. See Special In-struction SEHS8515.

79 Component of preceding assembly or group; quantity shown is per assembly or group.80 These components are not included in the roller group. Quantities shown are required to mount each roller.

132

D7R, D7H, 572RD7R, D7H END GUIDING GUARDSHEAVY DUTY AND ROTATING BUSHING TRACK (STD, XR, LGP)(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERLeft Outer, Right Inner 2 165-7576Wear Strip 4 203-8040Bolt 12 7X-0343Washer 12 8T-4122

D7H END GUIDING GUARDSSEALED AND LUBRICATED TRACK (STD, XR, LGP)

(PER MACHINE) QUANTITY PART NUMBERFront (Guard Assembly)Right Outer, Left Inner 2 3T-7192Left Outer, Right Inner 2 3T-7195Wear Strip 2 3T-7710Wear Strip 2 3T-7711Bolt 12 7X-0343Washer 12 8T-4122Rear (Guard Assembly)Right Outer, Left Inner 2 3T-7192Left Outer, Right Inner 2 3T-7195Wear Strip 2 3T-7710Wear Strip 2 3T-7711Bolt 12 7X-0343Washer 12 8T-4122

D7R/D7H STD TRACK ROLLER GUARDS (FULL LENGTH - CAST HEAVY DUTY)HEAVY DUTY AND ROTATING BUSHING TRACK ONLY

(PER MACHINE) QUANTITY PART NUMBERTrack Guide Kit 1 175-3829Guard (RH Front) 2 169-0164Guard (RH Rear) 2 169-0163Guard (LH Front) 2 169-0163Guard (LH Rear) 2 169-0164Tube 12 165-3663Rod 12 165-3664Nut 24 7D-8508Washer 24 8C-6913Bolt 24 7X-0383Spacer 24 178-7195Bolt 8 5C-6565Washer 8 7X-0590

133

D7R, D7H, 572RD7R/D7H XR TRACK ROLLER GUARDS (FULL LENGTH - CAST HEAVY DUTY)

HEAVY DUTY AND ROTATING BUSHING TRACK ONLY(PER MACHINE) QUANTITY PART NUMBERTrack Guide Kit 1 175-3830Guard (RH Front) 2 166-3451Guard (RH Rear) 2 166-3449Guard (LH Front) 2 166-3449Guard (LH Rear) 2 166-3451Tube 14 165-3663Rod 14 165-3664Nut 28 7D-8508Washer 28 8C-6913Bolt 28 7X-0383Spacer 28 178-7195Bolt 8 5C-6565Washer 8 7X-0590

D7R/H LGP, 572R TRACK ROLLER GUARDS (FULL LENGTH - CAST HD)HEAVY DUTY AND ROTATING BUSHING TRACK ONLY

(PER MACHINE) QUANTITY PART NUMBERTrack Guide Kit 1 175-3831Guard (RH Front) 2 169-0162Guard (RH Rear) 2 169-0161Guard (LH Front) 2 169-0161Guard (LH Rear 2 169-0162Tube 12 165-3663Rod 12 165-3664Nut 24 7D-8508Washer 24 8C-6913Bolt 24 7X-0383Spacer 24 178-7195Bolt 8 5C-6565Washer 8 7X-0590

D7R/D7H STD TRACK ROLLER GUARDS (FULL LENGTH)HEAVY DUTY AND ROTATING BUSHING TRACK ONLY

NOT FOR NACD USE(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 111-0437Tube 12 111-0428Rod 12 111-0429Bolt 8 5C-6565Bolt 24 7X-0383Washer 8 7X-0590Washer 24 8C-6913

134

D7R, D7H, 572RD7R/D7H STD TRACK ROLLER GUARDS (FULL LENGTH)HEAVY DUTY AND ROTATING BUSHING TRACK ONLYNOT FOR NACD USE(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERSpacer 24 178-7195Nut 24 7D-8508

D7R/D7H XR TRACK ROLLER GUARDS (FULL LENGTH)HEAVY DUTY AND ROTATING BUSHING TRACK ONLY

NOT FOR NACD USE(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 111-0443Tube 12 111-0428Rod 12 111-0429Bolt 8 5C-6565Bolt 28 7X-0383Washer 8 7X-0590Washer 24 8C-6913Spacer 28 178-7195Nut 24 7D-8508

D7R/D7H LGP TRACK ROLLER GUARDS (FULL LENGTH)HEAVY DUTY AND ROTATING BUSHING TRACK ONLY

NOT FOR NACD USE(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 111-0446Tube 12 111-0428Rod 12 111-0429Bolt 8 5C-6565Bolt 24 7X-0383Washer 8 7X-0590Washer 24 8C-6913Spacer 24 178-7195Nut 24 7D-8508

D7H STD TRACK ROLLER GUARDS (FULL LENGTH)SEALED AND LUBRICATED TRACK

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 9W-3550Tube 12 2F-0025Rod 12 8H-1383Bolt 8 5C-6565Bolt 24 7X-0383Washer 8 7X-0590

135

D7R, D7H, 572RD7H STD TRACK ROLLER GUARDS (FULL LENGTH)SEALED AND LUBRICATED TRACK(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERWasher 24 8C-6913Spacer 24 178-7195Nut 12 7D-8508

D7H XR TRACK ROLLER GUARDS (FULL LENGTH)SEALED AND LUBRICATED TRACK

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 9W-0929Tube 14 2F-0025Rod 14 8H-1383Bolt 8 5C-6565Bolt 28 7X-0383Washer 8 7X-0590Washer 28 8C-6913Spacer 28 178-7195Nut 14 7D-8508

D7H LGP TRACK ROLLER GUARDS (FULL LENGTH)SEALED AND LUBRICATED TRACK

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 9W-4025Tube 12 2F-0025Rod 12 8H-1383Bolt 8 5C-6565Bolt 24 7X-0383Washer 8 7X-0590Washer 24 8C-6913Spacer 24 178-7195Nut 12 7D-8508

D7R STD/LGP, D7H STD/LGP 572R CENTER GUIDING GUARDSCAST HEAVY DUTY, FOR HEAVY DUTY AND ROTATING BUSHING TRACK USE ONLY

(PER MACHINE) QUANTITY PART NUMBERTrack Guide Kit 1 161-8582Guard Assembly 4 163-8686Tube 4 165-3663Rod 4 165-3664Bolt 8 7X-0383Washer 8 8C-6913

136

D7R, D7H, 572RD7R STD/LGP, D7H STD/LGP 572R CENTER GUIDING GUARDSCAST HEAVY DUTY, FOR HEAVY DUTY AND ROTATING BUSHING TRACK USE ONLY(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERTrack Guide Kit 1 161-8582Nut 8 7D-8508Spacer 8 178-7195

D7R/D7H XR CENTER GUIDING GUARDSCAST HEAVY DUTY, FOR HEAVY DUTY AND ROTATING BUSHING TRACK USE ONLY

(PER MACHINE) QUANTITY PART NUMBERTrack Guide Kit 1 175-3828Guard Assembly 4 163-8688Tube 6 165-3663Rod 6 165-3664Bolt 12 7X-0383Washer 12 8C-6913Nut 12 7D-8508Spacer 12 178-7195

D7R STD/LGP, D7H STD/LGP CENTER GUIDING GUARDSFABRICATED, FOR HEAVY DUTY AND ROTATING BUSHING TRACK USE ONLY

NOT FOR NACD USE(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 111-0423Tube 4 111-0428Rod 4 111-0429Bolt 8 7X-0383Washer 8 8C-6913Nut 8 7D-8508Spacer 8 178-7195

D7R/D7H XR CENTER GUIDING GUARDSFABRICATED, FOR HEAVY DUTY AND ROTATING BUSHING TRACK USE ONLY

NOT FOR NACD USE(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 111-0431Tube 6 111-0428Rod 6 111-0429Bolt 12 7X-0383Washer 12 8C-6913Nut 12 7D-8508Spacer 12 178-7195

137

D7R, D7H, 572RD7H STD/LGP CENTER GUIDING GUARDS

SEALED AND LUBRICATED TRACK(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 9W-3560Tube 4 2F-0025Rod Assembly 4 – (81)

Bolt 8 7X-0383Washer 8 8C-6913Nut 4 7D-8508Spacer 8 178-7195

D7H XR CENTER GUIDING GUARDSSEALED AND LUBRICATED TRACK

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 9W-0922Tube 6 2F-0025Rod Assembly 6 – (81)

Bolt 12 7X-0383Washer 12 8C-6913Nut 6 7D-8508Spacer 12 178-7195

81 Rod Assembly 8H1384 serviced by (1) 8H1383 Rod and (1) 1B4208 Nut.

138

D8T, D8R, D8N, 587T, 587R, 583T, 583R, 578D8T, D8R, D8N TRACK

POSITIVE PIN RETENTION (PPR) TRACK7XM, 1XJ, 9TC, 5TJ, 9EM, 6YZ, AKA, KPZ, J8B


Link Assembly – 44 Section 2 272-6009Track LinksRH Pin End Master 1 8E-4061LH Pin End Master 1 8E-4062RH Bushing End Master 1 8E-4457LH Bushing End Master 1 8E-4458RH Regular 43 8E-4513LH Regular 43 8E-4514Other ComponentsPin 44 7T-7054Bushing 44 6Y-3914Retainer Ring (PPR) 88 6Y-0469Seal Assembly (Rigid) 88 239-7943Thrust Ring 88 360-2308 (1)

Stopper 44 7G-4332Plug 44 6Y-0473Track Hardware (2)

Bolt 172 6V-1723Nut 172 7G-6442Master Bolt (Long) 2 6V-1725Master Bolt (Short) 2 6V-1724Special Set/GroupSeal Set (90 Seal Assemblies) 1 272-6013Bushing and Seal Group (45 Sections) 1 5Y-2373Retainer Ring Group (98 Retaining Rings) 1 6Y-1081Facing Group (3) 1 9W-9675

D8T, D8R, D8N MADE TO ORDER (MTO) TRACK GROUPSTRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIES

PPR TRACKQUANTITY PART NUMBER

Link Assembly Used 272-6009Super Extreme Service Shoe –24" (610 mm) 2 384-2964Extreme Service Shoe – 22" (560 mm) 2 384-2954Extreme Service Shoe – 24" (610 mm) 2 384-2960

1 360-2309 ring assembly contains two facing rings already applied to the 360-2308 thrust ring.2 Not part of link assembly; required to assemble track group.3 Contains 400 facing rings to service 2 tracks.

139

D8T, D8R, D8N, 587T, 587R, 583T, 583R, 578D8T, D8R, D8N MADE TO ORDER (MTO) TRACK GROUPSTRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIESPPR TRACK(Cont'd.)

QUANTITY PART NUMBERExtreme Service Shoe – 24" (610 mm) (Trap) 2 384-2962Extreme Service Shoe – 26" (660 mm) 2 384-2968

D8T, D8R, D8N TRACKNON-POSITIVE PIN RETENTION (NON-PPR) TRACK7XM, 1XJ, 9TC, 5TJ, 9EM, 6YZ, AKA, KPZ, J8B


Link Assembly – 44 Section 2 272-6010Track LinksRH Pin End Master 1 8E-4059LH Pin End Master 1 8E-4060RH Bushing End Master 1 8E-4457LH Bushing End Master 1 8E-4458RH Regular 43 8E-4505LH Regular 43 8E-4506Other ComponentsPin 43 199-2794Master Pin 1 9W-5588Bushing 44 6Y-3914Retaining Ring 2 3T-9118Seal Assembly (Rigid) 88 239-7943Thrust Ring 88 360-2308 (4)


Bolt 172 6V-1723Nut 172 7G-6442Master Bolt (Long) 2 6V-1725Master Bolt (Short) 2 6V-1724Special Set/GroupSeal Set (90 Seal Assemblies) 1 272-6013Bushing & Seal Group (45 Sections) 1 5Y-2373

4 360-2309 ring assembly contains two facing rings already applied to the 360-2308 thrust ring.5 Not part of link assembly: required to assemble track group.

140

D8T, D8R, D8N, 587T, 587R, 583T, 583R, 578D8T, D8R, D8N MADE TO ORDER (MTO) TRACK GROUPS

TRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIESNon PPR TRACK

QUANTITY PART NUMBERLink Assembly Used 272-6010Extreme Service Shoe – 22" (560 mm) 2 8E-7700Extreme Service Shoe – 24" (610 mm) 2 6Y-4124Moderate Service Shoe – 28" (710 mm) 2 8E-7699

D8N/R/T GENERAL DUTY LINK ASSEMBLY8.50” (215.9 mm) PITCH – 7/8” Bolt

Per Machine QUANTITY PART NUMBERLink Assemby 2 391-3968For link assembly replacement parts; utilize the non-PPR part numbers as required

D8N/R/T GENERAL DUTY TRACK GROUPSLink Assembly Used 391-3968 QUANTITY PART NUMBERExtreme Service Shoe – 22” (560 mm) 2 391-3969Extreme Service Shoe – 28” (700 mm) 2 391-3970

D8N/R/T GENERAL DUTY UNDERCARRIAGE ARRANGEMENTSMachine Configuration QUANTITY PART NUMBER22” Extreme Service Arrangement 1 415-567128” Extreme Service Arrangement 1 415-5681Undercarriage Arrangement part numbers allow for quick look up of pricing a complete General Duty Undercar-riage. They are not available for purchase (information purpose only). When the Undercarriage Arrangement PN’sare placed in DBS/ANTARESSM they will provide a list of PN’s to order. Includes the parts necessary to do a com-plete UC bottom replacement; sprockets and hardware, Carrier Rollers, Bottom Rollers, Idlers and Track Groups(includes: Links Assemblies, Shoes, and Hardware)

D8T, D8R, D8N SystemOne TRACK7XM, 1XJ, 9TC, 5TJ, 9EM, 6YZ, AKA, KPZ, J8B

8.58" (218.0 mm) PITCH – 7/8" BOLT

QUANTITY PART NUMBERLink Assembly – 44 Section 2 304-5688Components of Link AssemblyLink Box Standard 20 318-5033Link Box (Shoe End Masters) 1 321-2018Link Box (Rail End Masters) 1 321-2019Standard Link (Outer) 42 304-5680Track Hardware (6)


141

D8T, D8R, D8N, 587T, 587R, 583T, 583R, 578D8T, D8R, D8N SystemOne TRACK7XM, 1XJ, 9TC, 5TJ, 9EM, 6YZ, AKA, KPZ, J8B8.58" (218.0 mm) PITCH – 7/8" BOLT(Cont'd.)

QUANTITY PART NUMBERLink Assembly – 44 Section 2 304-5688Bolt 172 6V-1723Nut 172 273-8806Master Bolt 4 6V-1725

PL83, PL87, 587T, 587R, 583T, 583R, 578 PIPELAYER TRACKPOSITIVE PIN RETENTION (PPR) TRACK

587T/R, 583T/R (47 SECTION): FAT, BXL, CMX, 2XS 578 (49 SECTION), PL83KSD, PL87KKT (48 SECTION): 8HB8.50" (215.9 mm) PITCH – 7/8" BOLT

PARTNUMBER

587T/R, 583T/R 47Section

PL83, PL87 48Section 578 49 Section

Link Assembly 136-6713 358-0443 6I-8839Track LinksRH Pin End Master 8E-4061 1 1 1LH Pin End Master 8E-4062 1 1 1RH Bushing End Master 8E-4457 1 1 1LH Bushing End Master 8E-4458 1 1 1RH Regular 8E-4513 46 47 48LH Regular 8E-4514 46 47 48Other ComponentsPin 7T-7054 47 48 49Bushing 6Y-3914 47 48 49Seal Assembly (Rigid) 239-7943 94 96 98Thrust Ring 360-2308 (7) 94 96 98Retaining Ring (PPR) 6Y-0469 94 96 98Stopper 7G-4332 47 48 49Plug 6Y-0473 47 48 49Track Hardware (8)

Bolt 6V-1723 184 188 192Nut 7G-6442 184 188 192Master Bolt (Long) 6V-1725 2 2 2Master Bolt (Short) 6V-1724 2 2 2Special Set/GroupSeal Set (90 Seal Assemblies) 272-6013 1 1 1Bushing and Seal Group (45Sections)

5Y-2373 1 1 1

7 360-2309 ring assembly contains two facing rings already applied to the 360-2308 thrust ring.8 Not part of link assembly; required to assemble track group.

142

D8T, D8R, D8N, 587T, 587R, 583T, 583R, 578PL83, PL87, 587T, 587R, 583T, 583R, 578 PIPELAYER TRACKPOSITIVE PIN RETENTION (PPR) TRACK587T/R, 583T/R (47 SECTION): FAT, BXL, CMX, 2XS 578 (49 SECTION), PL83KSD, PL87KKT (48 SECTION): 8HB8.50" (215.9 mm) PITCH – 7/8" BOLT(Cont'd.)

PARTNUMBER

587T/R, 583T/R 47Section

PL83, PL87 48Section 578 49 Section

Link Assembly 136-6713 358-0443 6I-8839Retaining Ring Group (98 RetainingRings)

6Y-1081 1 1 1

Facing Group (9) 9W-9675 1 1 1

D8T, D8R, D8N TRACK SHOES8.50" (215.9 mm) PITCH – 7/8" BOLT

TYPE WIDTH PART NUMBERSuper Extreme Service 24.0" (610 mm) 317-1030Super Extreme Service (Trapezoidal Opening) 26.0" (660 mm) 317-1031Extreme Service 22.0" (560 mm) 7T-2390Extreme Service (Trapezoidal Opening) 22.0" (560 mm) 329-9268Extreme Service 24.0" (610 mm) 7T-2392Extreme Service (Trapezoidal Opening) 24.0" (610 mm) 329-9269Extreme Service 26.0" (660 mm) 7T-2394Extreme Service (Trapezoidal Opening) 26.0" (660 mm) 329-9270Extreme Service 27.6" (700 mm) 200-4074Extreme Service (Trapezoidal Opening) 27.6" (700 mm) 330-0581Extreme Service (10) 38.0" (965 mm) 191-0921Extreme Service (Trapezoidal Opening) (10) 38.0" (965 mm) 330-0582Moderate Service 22.0" (560 mm) 7G-6448Moderate Service (Trapezoidal Opening) 22.0" (560 mm) 329-9271Moderate Service 24.0" (610 mm) 9P-2661Moderate Service (Trapezoidal Opening) 24.0" (610 mm) 329-9272Moderate Service 26.0" (660 mm) 9P-2665Moderate Service (Trapezoidal Opening) 26.0" (660 mm) 329-9273Moderate Service 28.0" (710 mm) 7G-6454Moderate Service (Trapezoidal Opening) 28.0" (710 mm) 329-9818Moderate Service (Trapezoidal Opening) (Clipped) (10) 32.0" (810 mm) 330-0583Moderate Service (Clipped) (10) 32.0" (810 mm) 191-9917Moderate Service (10) 38.0" (965 mm) 1Q-4621Moderate Service (Trapezoidal Opening) (10) 38.0" (965 mm) 330-0580Chopper (Trapezoidal Opening) 24.0" (610 mm) 8E-9799

9 Contains 400 facing rings to service 2 tracks.10 For use with wide gauge arrangement only.

143

D8T, D8R, D8N, 587T, 587R, 583T, 583R, 578D8 GENERAL DUTY SHOES

Track Groups have Moderate Service shoes that are not serviced, Heavy Duty Moderate Service shoes are availablefor use on link assemblies. Refer to the table above for more information on offerings.

D8T, D8R, D8N SystemOne TRACK SHOES8.58" (218.0 mm) PITCH – 7/8 BOLTS


MASTER SHOEPART NUMBER

Super Extreme Service 22.0" (560 mm) 317-1018 317-1019Super Extreme Service 24.0" (610 mm) 317-1020 317-1021Super Extreme Service 26.0" (660 mm) 276-0541 296-1373Super Extreme Service 28.0" (710 mm) 276-0552 242-1931Super Extreme Service (Center Hole) 24.0" (610 mm) 276-0545 296-1372Super Extreme Service (Center Hole) 26.0" (660 mm) 276-0533 240-6673Extreme Service 24.0" (610 mm) 246-7483 295-9963Extreme Service 26.0" (660 mm) 272-3180 296-1396Extreme Service 28.0" (710 mm) 272-3183 240-6674Extreme Service (11) 38.0" (965 mm) 267-7504 257-6926Extreme Service (Center Hole) 24.0" (610 mm) 272-3181 295-9964Extreme Service (Center Hole) 26.0" (660 mm) 246-7486 257-6929Extreme Service (Center Hole) (11) 38.0" (965 mm) 300-9112 300-8743Moderate Service 24.0" (610 mm) 272-3182 295-9965Moderate Service 26.0" (660 mm) 272-3179 295-9967Moderate Service 28.0" (710 mm) 246-7493 295-9968

PL83, 583T, 583R, 578 TRACK SHOES8.50" (215.9 mm) PITCH – 7/8" BOLT

TYPE WIDTH PART NUMBERModerate Service (Clipped Grouser) (12) 28.0" (710 mm) 8E-9396Moderate Service (Clipped Grouser) (12) 30.0" (760 mm) 8E-9399

PL87, 587T, 587R TRACK SHOES8.50" (215.9 mm) PITCH - 7/8" BOLT

TYPE WIDTH PART NUMBERSuper Extreme Service (Clipped Grouser) 34.0" (865 mm) 317-1033

11 For use with wide gauge arrangement only.12 Clipped grouser edges; reduces snag loading.

144

D8T, D8R, D8N, 587T, 587R, 583T, 583R, 578D8T, D8R, D8N, 587T, 587R, 583T, 583R, 578, PL83, PL87 SPROCKETS

8.50" (215.9 mm) PITCH

(PER SIDE) QUANTITY PART NUMBERSprocket Segment (Tough Steel) (5 Tooth) 5 314-5462Bolt 35 5P-7665Nut 35 7H-3608Washer 35 6V-5841

D8N/R/T GENERAL DUTY SPROCKET SEGMENTS(PER SIDE) QUANTITY PART NUMBERSprocket Segment (5 Tooth) 5 397-9557Bolt 3/4” 35 5P-7665Nut 35 7H-3608Washer 35 6V-5841

D8T, D8R, D8N, SystemOne SPROCKETS8.58" (218.0 mm) PITCH

(PER SIDE) QUANTITY PART NUMBERSprocket Segment (Tough Steel) (5 Tooth) 5 278-2375Bolt 35 5P-7665Nut 35 7H-3608Washer 35 6V-5841

D8T, D8R, D8N IDLERS7XM3582-UP, 6YZ0001-UP

(PER MACHINE) QUANTITY FORMER PART NUMBER PART NUMBERGroup – Front (Large Diameter) 2 – 111-1730

Group – Rear (Small Diameter) (13) 2 – 111-1729

Components of GroupIdler Assembly (Front) 1 6Y-0556 6Y-0556Idler Assembly (Rear) 1 6Y-0553 6Y-0553Bearing (14) 2 154-3298 154-3298Shaft 1 138-9712 154-3307Collar 2 – 107-3947Retainer 2 9P-0201 107-3946Thrust Washer 2 8E-6619 8E-6619Bolt 24 5P-2546 5P-2546Washer 24 3K-6113 3K-6113Stabilizer Ring 2 6T-5247 –

Seal – Duo-Cone Group (Inverted) 2 7T-0159 –

Toric Ring (14) 1 8P-0021 –

13 D8R/N Non-Suspended (Hardbottom) Undercarriage machines use all (4) small diameter idlers Front/Rear14 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

145

D8T, D8R, D8N, 587T, 587R, 583T, 583R, 578D8T, D8R, D8N IDLERS7XM3582-UP, 6YZ0001-UP(Cont'd.)(PER MACHINE) QUANTITY FORMER PART NUMBER PART NUMBERGroup – Front (Large Diameter) 2 – 111-1730

Group – Rear (Small Diameter) (13) 2 – 111-1729

O-Ring (15) 1 6V-2700 –

Seal – Duo-Cone Group (Symmetric) 2 – 162-7863Toric Ring (15) 2 – 162-2167Seal – Retainer 2 8F-9516 8F-9516Seal – Collar 2 – 107-4057Stopper 1 9G-4872 9G-4872Plug 1 6Y-0473 6Y-0473Mounting Hardware (16)

End Cap (Abutment Style) 2 306-9441 306-9441Bolt 4 9W-4480 9W-4480Washer 4 3S-1349 3S-1349Insert 2 9W-4481 9W-4481Special Application Arctic Idler GroupsIdler Group – Front (Large Diameter) (Arctic) 2 – 244-0879Idler Group – Rear (Small Diameter) (Arctic) 2 – 244-0878Seal – Duo-Cone Group (Inverted) 2 7T-5125 –

Toric Ring (15) 1 7T-1093 –

O-Ring (15) 1 6V-2700 –

Seal – Duo-Cone Group (Symmetric) 2 – 162-7863Toric Ring (15) 2 – 162-2167

D8N/R/T GENERAL DUTY IDLERS(PER SIDE) QUANTITY PART NUMBERFront Idler (698 mm) 2 415-6134Rear Idler (620 mm) (17) 2 415-6132

D8T, D8R, D8N SystemOne IDLERSCENTER TREAD IDLER (CTI)

(PER MACHINE) QUANTITY PART NUMBERGroup – Front (Large Diameter) (786 mm Dia.) 2 329-5409

Group – Rear (Small Diameter) (720 mm Dia.) 2 329-5412

Components of Group

13 D8R/N Non-Suspended (Hardbottom) Undercarriage machines use all (4) small diameter idlers Front/Rear15 Component of preceding assembly or group; quantity shown is quantity per assembly or group.16 These components are not included in the idler group; quantities shown are required to mount each idler.17 D8R/N Non-Suspended (Hardbottom) Undercarriage machines use all small diameter idlers.

146

D8T, D8R, D8N, 587T, 587R, 583T, 583R, 578D8T, D8R, D8N SystemOne IDLERSCENTER TREAD IDLER (CTI)(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERGroup – Front (Large Diameter) (786 mm Dia.) 2 329-5409


Idler Assembly (Front) 1 329-5408

Idler Assembly (Rear) 1 329-5411Bearing (18) 2 154-3298Shaft 1 154-3307Collar 2 107-3947Retainer 2 107-3946Thrust Washer 2 8E-6619Bolt 24 5P-2546Washer 24 3K-6113Seal – Duo-Cone Group (Symmetric) 2 162-7863Toric Ring (18) 2 162-2167Seal – Retainer 2 8F-9516Seal – Collar 2 107-4057Stopper 1 9G-4872Plug 1 6Y-0473Mounting Hardware (19)

End Cap (Abutment Style) 2 306-9441Bolt 4 9W-4480Washer 4 3S-1349Insert 2 9W-4481

D8T, D8R, D8N LANDFILL/SPECIAL APPLICATION IDLERS(PER MACHINE) QUANTITY PART NUMBERGroup – Front (Large Diameter) 2 244-1323

Group – Rear (Small Diameter) (20) 2 244-1324

Components of GroupIdler Assembly (Front) 1 6Y-0556Idler Assembly (Rear) 1 6Y-0553Bearing (18) 2 154-3298Shaft 1 154-3307Collar 2 261-9673Retainer 2 261-9672Thrust Washer 2 8E-6619Bolt 24 8C-6877

18 Component of preceding assembly or group; quantity shown is quantity per assembly or group.19 These components are not included in the idler group; quantities shown are required to mount each idler.20 D8R/N Non-Suspended (Hardbottom) Undercarriage machines use all (4) small diameter idlers Front/Rear

147

D8T, D8R, D8N, 587T, 587R, 583T, 583R, 578D8T, D8R, D8N LANDFILL/SPECIAL APPLICATION IDLERS (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERGroup – Front (Large Diameter) 2 244-1323

Group – Rear (Small Diameter) (20) 2 244-1324

Washer 24 8T-5360Plate 2 166-3324Seal – Duo-Cone Group (Symmetric) 2 162-7863Toric Ring (21) 2 162-2167Seal – Retainer 2 8F-9516Seal – Collar 2 107-4057Stopper 1 9G-4872Plug 1 6Y-0473Mounting Hardware (22)

End Cap (Abutment Style) 2 306-9441Bolt 4 9W-4480Washer 4 3S-1349Insert 2 9W-4481Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group (Symmetric) 2 9W-8878Toric Ring (21) 2 107-4888

D8T, D8R, D8N SystemOne LANDFILL/SPECIAL APPLICATION IDLERSCENTERED TREAD IDLER (CTI)

(PER MACHINE) QUANTITY PART NUMBERGroup – Front (Large Diameter) (786 mm Dia.) 2 314-5466


Components of GroupIdler Assembly (Front) 1 329-5408

Idler Assembly (Rear) 1 329-5411Bearing (21) 2 154-3298Shaft 1 154-3307Collar 2 261-9673Retainer 2 261-9672Thrust Washer 2 8E-6619Bolt 24 8C-6877Washer 24 8T-5360Plate 2 166-3324Seal – Duo-Cone Group (Symmetric) 2 162-7863Toric Ring (21) 2 162-2167Seal – Retainer 2 8F-9516

20 D8R/N Non-Suspended (Hardbottom) Undercarriage machines use all (4) small diameter idlers Front/Rear21 Component of preceding assembly or group; quantity shown is quantity per assembly or group.22 These components are not included in the idler group; quantities shown are required to mount each idler.

148

D8T, D8R, D8N, 587T, 587R, 583T, 583R, 578D8T, D8R, D8N SystemOne LANDFILL/SPECIAL APPLICATION IDLERSCENTERED TREAD IDLER (CTI)(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERGroup – Front (Large Diameter) (786 mm Dia.) 2 314-5466


Seal – Collar 2 107-4057Stopper 1 9G-4872Plug 1 6Y-0473Mounting Hardware (23)

End Cap (Abutment Style) 2 306-9441Bolt 4 9W-4480Washer 4 3S-1349Insert 2 9W-4481

D8T, D8R, D8N SystemOne IDLER GUARD CONVERSION KITGUARDING FOR CENTER TREAD IDLER (CTI)

(PER MACHINE) QUANTITY PART NUMBERIdler Guard Kit (Suspended) (24) 1 316-8674

D8N/T , 583 R/T, 587 R/T, PL83, PL87 ARCTIC IDLER (Small)QUANTITY PART NUMBER

Group 4 244-0878

Components of GroupIdler Assembly 1 6Y-0553Bearing 2 154-3298Shaft 1 154-3307Collar - Seal 2 107-3947Retainer 2 107-3946Thrust Washer 2 8E-6619Bolt 24 5P-2546Washer 24 3K-6113Seal -Duo-Cone Group 2 162-7863Toric Ring 2 162-2167Seal - Retainer 2 107-4057Seal - Collar 2 8F-9516Stopper 1 9G-4872Plug 1 6Y-0473

23 These components are not included in the idler group; quantities shown are required to mount each idler.24 Refer to REHS3373 for piece-part and assembly information.

149

D8T, D8R, D8N, 587T, 587R, 583T, 583R, 578D8L/N/R/T ARCTIC IDLER (Large)


Components of GroupIdler Assembly 1 6Y-0556Bearing 2 152-3298Shaft 1 154-3307Collar - Seal 2 107-3947Retainer 2 107-3946Thrust Washer 2 8E-6619Bolt 24 5P-2546Washer 24 3K-6113Seal -Duo-Cone Group 2 162-7863Toric Ring 2 162-2167Seal - Retainer 2 107-4057Seal - Collar 2 8F-9516Stopper 1 9G-4872Plug 1 6Y-0473

D8T, D8R, D8N SystemOne IDLER HARDWARE CONVERSION KITHARDWARE AND SHIMS FOR CENTER TREAD IDLER (CTI)

(PER MACHINE) QUANTITY PART NUMBERIdler Hardware Kit (Suspended) 1 307-0761

587T, 587R, 583T, 583R, PL83, PL87 IDLERS(PER MACHINE) QUANTITY PART NUMBERGroup 4 111-1729

Components of GroupIdler Assembly 1 6Y-0553Bearing (25) 2 154-3298Shaft 1 154-3307Collar 2 107-3947Retainer 2 107-3946Thrust Washer 2 8E-6619Bolt 24 5P-2546Washer 24 3K-6113Seal – Duo-Cone Group (Symmetric) 2 162-7863Toric Ring (25) 2 162-2167Seal – Retainer 2 8F-9516Seal – Collar 2 107-4057Stopper 1 9G-4872


150

D8T, D8R, D8N, 587T, 587R, 583T, 583R, 578587T, 587R, 583T, 583R, PL83, PL87 IDLERS (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERGroup 4 111-1729Plug 1 6Y-0473Front Mounting Hardware (26)

End Cap (Abutment Style) 1 306-9437

Block (Use with 306-9437 end cap) 1 9W-7882End Cap (Abutment Style) 1 306-9439

Block (Use with 306-9439 end cap) 1 9W-7884Bolt 4 8T-4934Washer 4 3S-1349Rear Mounting Hardware (26)


Block (Use with 306-9437 End Cap) 1 357-6310


Block (Use with 306-9439 End Cap) 1 357-6311Bolt 4 127-4835Washer 4 7X-0531

578 IDLERS(PER MACHINE) QUANTITY FORMER PART NUMBER PART NUMBERGroup – Front (Large Diameter) 4 – 111-1730

Components of GroupIdler Assembly (Front) 1 6Y-0556 6Y-0556Bearing (27) 2 154-3298 154-3298Shaft 1 138-9712 154-3307Collar 2 – 107-3947Retainer 2 9P-0201 107-3946Thrust Washer 2 8E-6619 8E-6619Bolt 24 5P-2546 5P-2546Washer 24 3K-6113 3K-6113Stabilizer Ring 2 6T-5247 –


Toric Ring (27) 1 8P-0021 –

O-Ring (27) 1 6V-2700 –

Seal – Duo-Cone Group (Symmetric) 2 – 162-7863Toric Ring (27) 2 – 162-2167Seal – Retainer 2 8F-9516 8F-9516Seal – Collar 2 – 107-4057Stopper 1 9G-4872 9G-4872

26 These components are not included in the idler group; quantities shown are required to mount each idler.27 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

151

D8T, D8R, D8N, 587T, 587R, 583T, 583R, 578578 IDLERS (Cont'd.)(PER MACHINE) QUANTITY FORMER PART NUMBER PART NUMBERGroup – Front (Large Diameter) 4 – 111-1730

Plug 1 6Y-0473 6Y-0473Mounting Hardware (28)

End Cap (Abutment Style) 2 306-9441 306-9441Bolt 4 9W-4480 9W-4480Washer 4 3S-1349 3S-1349Insert 2 9W-4481 9W-4481Special Application Arctic Idler GroupsIdler Group – Front (Large Diameter) (Arctic) 2 – 244-0879Seal – Duo-Cone Group (Inverted) 2 7T-5125 –

Toric Ring (29) 1 7T-1093 –

O-Ring (29) 1 6V-2700 –


D8T, D8R, D8N, 587T, 587R, 583T, 583R, 578 CARRIER ROLLERS(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) 2 246-0775 (30)


End Cap (Abutment Style) 2 131-1651Bolt 4 6T-1140Washer 4 5P-8249

D8N/R/T GENERAL DUTY CARRIER ROLLERSQUANTITYPER

MACHINE PART NUMBERSingle Flange Roller 2 399-5952Roller Hardware (31)

Cap (32) 2 131-1651Bolt 4 6T-1140

28 These components are not included in the idler group; quantities shown are required to mount each idler.29 Component of preceding assembly or group; quantity shown is quantity per assembly or group.30 Refer to track roller section for component breakdown.31 These components are not included in the roller group; quantities shown are required to mount each roller.32 Caps only required if machine had old style rollers

152

D8T, D8R, D8N, 587T, 587R, 583T, 583R, 578D8R, D8N CARRIER ROLLERS

FORMER(PER MACHINE) QUANTITY PART NUMBERGroup 2 8E-0400Components of GroupRoller Shell 1 8E-0399Shaft 1 8E-0398Cup 2 7K-5448Cone 2 7K-5449Retaining Ring 1 8F-0737Cover 1 5M-2043Support 1 7H-2623Plug 1 2P-0347Bolt 3 0S-1594Seal – Duo-Cone Group 1 9W-2142Toric Ring (33) 2 8H-2265Seal – Cover 1 2H-6338Seal – Plug 1 1S-8947Seal – Shaft O-Ring 1 6H-3977Plate 1 3T-6269Bolt 2 6F-7030Lock 1 0T-0329Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 1 8S-5656Toric Ring (33) 2 8S-5653

D8T, D8R, D8N, 578 TRACK ROLLERS(PER MACHINE) QUANTITY PART NUMBERDouble Flange (DF) (34) 8 246-0779 (35)

Single Flange (SF) 8 (36) 246-0775 (35)

Components of GroupRoller Shell (DF) 1 246-0780Roller Shell (SF) 1 284-5456Bearing (37) 2 9W-9844Shaft 1 107-8084Collar 2 107-3945Retainer 2 107-8085

33 Component of preceding group; quantity shown is per group.34 D8R/N Non-suspended (Hardbottom) undercarriage use all double flange rollers groups.35 Roller groups with longer retainer bolts (Ref IRM UC 01-09), effective serial numbers 6YZ00367 & UP, 7XM05116 & UP, 9EM01216 & UP.36 Machines equipped with SystemOne undercarriage, use 16 single flange roller groups.37 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

153

D8T, D8R, D8N, 587T, 587R, 583T, 583R, 578D8T, D8R, D8N, 578 TRACK ROLLERS (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERThrust Washer (38) 2 8E-7510Bolt 12 241-1855Washer 12 5P-8245Seal – Duo-Cone Group (Symmetric) 2 162-7862Toric Ring (39) 2 162-2166Seal – Retainer 2 5F-3106Seal – Collar 2 7J-2036Stopper 1 9G-5664Plug 1 6Y-0473Mounting Hardware (40)

End Cap (41) 2 131-1651Bolt 4 6T-1140Washer 4 5P-8249Special Application Roller GroupsDouble Flange (DF) (Arctic) 8 278-9540Single Flange (SF) (Arctic) 8 278-9539Seal – Duo-Cone Group (Symmetric) (Arctic) 2 162-7862Toric Ring (Arctic) (39) 2 162-2166Double Flange (DF) (High Heat) 8 278-9541Single Flange (SF) (High Heat) 8 278-9538Seal – Duo-Cone Group (Symmetric) (High Heat) 2 107-4889Toric Ring (High Heat) (39) 1 9M-9730Seal – Retainer (High Heat) 2 4S-5898

D8N/R/T GENERAL DUTY ROLLERS WITH END CAPS*QUANTITYPER

MACHINE PART NUMBERSingle Flange Roller 16 399-5952Roller Hardware (40)

Cap (42) 2 131-1651Bolt 4 6T-1140

* If additional guiding is required you may substitute 8 DF Heavy Duty Rollers (246-0779)

38 Use (1) 8P5217 Thrust Washer and (4) 8H4952 Dowels to repair former 9G8048 Retainer Assembly. DO NOT DRILL AND DOWEL NEW8E7510 Thrust Washer. See Special Instruction SEHS8515.

39 Component of preceding assembly or group; quantity shown is quantity per assembly or group.40 These components are not included in the roller group; quantities shown are required to mount each roller.41 Abutment Style Design (Effective Serial Number 7XM3135-UP).42 Caps only required if machine had old style rollers

154

D8T, D8R, D8N, 587T, 587R, 583T, 583R, 578D8T, D8R, D8N, 578 TRACK ROLLERS EARLY

INVERTED DUO-CONE SEAL GROUPS(PER MACHINE) QUANTITY PART NUMBERDouble Flange (DF) 8 –

Single Flange (SF) 8 (43) –



Bearing (46) 2 9W-9844Shaft 1 6T-7500Retainer 2 9W-8047Thrust Washer (47) 2 8E-7510Bolt 12 0S-1595Washer 12 5P-8245Stabilizer Ring 2 6T-4871Seal – Duo-Cone Group (Inverted) 2 7T-0158Toric Ring (46) 1 6P-8912O-Ring (46) 1 6V-2701Seal – Retainer 2 5F-3106Stopper 1 9G-5664Plug 1 6Y-0473Mounting Hardware (48)

End Cap (Abutment Style) 2 131-1651Bolt 4 6T-1140Washer 4 5P-8249Special Application Seal GroupSeal – Duo-Cone Group (Inverted) 2 7T-5133Toric Ring (46) 1 7T-1094O-Ring (46) 1 6V-2701

587T, 587R, 583T, 583R, PL83, PL87 TRACK ROLLERS(PER MACHINE) QUANTITY FORMER PART NUMBER PART NUMBERDouble Flange (DF) 18 – 198-6703 (49)

Components of GroupRoller Shell (DF) 1 153-3901 (50) 198-6704

43 10 Required for 578 Pipelayer.44 Roller Shell canceled and replaced by: (1) 246-0780 Roller Shell and (12) 241-1855 bolts.45 Roller Shell canceled and replaced by: (1) 284-5456 Roller Shell and (12) 241-1855 bolts.46 Component of preceding assembly or group; quantity shown is quantity per assembly or group.47 Use (1) 8P5217 Thrust Washer and (4) 8H4952 Dowels to repair former 9G8048 Retainer Assembly. DO NOT DRILL AND DOWEL NEW

8E7510 Thrust Washer. See Special Instruction SEHS8515.48 These components are not included in the roller group; quantities shown are required to mount each roller.49 Roller group with longer retainer bolts.50 Roller shell canceled and replaced by: (1) Roller Shell 198-6704, (12) Bolts 241-1855.

155

D8T, D8R, D8N, 587T, 587R, 583T, 583R, 578587T, 587R, 583T, 583R, PL83, PL87 TRACK ROLLERS (Cont'd.)(PER MACHINE) QUANTITY FORMER PART NUMBER PART NUMBERDouble Flange (DF) 18 – 198-6703 (49)

Bearing (51) 2 154-3298 154-3298Shaft 1 138-9712 138-9712Retainer 2 6Y-2946 6Y-2946Thrust Washer (52) 2 8E-6619 8E-6619Bolt 12 0S-1585 241-1855Washer 12 5P-8245 5P-8245Stabilizer Ring 2 6T-5247 6T-5247Seal – Duo-Cone Group (Inverted) 2 7T-0159 7T-0159Toric Ring (51) 1 8P-0021 8P-0021O-Ring (51) 1 6V-2700 6V-2700Seal – Retainer 2 8F-9516 8F-9516Stopper 1 9G-4872 9G-4872Plug 1 6Y-0473 6Y-0473Mounting Hardware (53)

End Cap (Abutment Style) 2 131-1650 131-1650Bolt 4 9X-8898 9X-8898Washer 4 3K-5234 3K-5234Special Application Roller GroupsDouble Flange (DF) (Arctic) 18 – 198-6859Seal – Duo-Cone Group (Arctic) 2 7T-5125 7T-5125Toric Ring (51) 1 7T-1093 7T-1093O-Ring (51) 1 6V-2700 6V-2700

D8T FLEXIBLE IDLER WEAR GUARDS(PER MACHINE) QUANTITY PART NUMBERGuard As. Front & Rear (Rubber) 4 163-2415Plate 4 155-2754Bolt (5/8 inch) 12 8T-6871Washer 12 8T-4122

D8R FLEXIBLE IDLER WEAR GUARDS7XM5094 & UP, 6YZ0325 TO 329, 6YZ0331 & UP, AKA0324 & UP, 9EM1213 & UP

(PER MACHINE) QUANTITY PART NUMBERGuard As. Front & Rear (Rubber) 4 163-2415Plate 4 155-2754

49 Roller group with longer retainer bolts.51 Component of preceding assembly or group; quantity shown is quantity per assembly or group.52 Use (1) 8P5217 Thrust Washer and (4) 8H4952 Dowels to repair former 9G8048 Retainer Assembly. DO NOT DRILL AND DOWEL NEW

8E7510 Thrust Washer. See Special Instruction SEHS8515.53 These components are not included in the roller group; quantities shown are required to mount each roller.

156

D8T, D8R, D8N, 587T, 587R, 583T, 583R, 578D8R FLEXIBLE IDLER WEAR GUARDS7XM5094 & UP, 6YZ0325 TO 329, 6YZ0331 & UP, AKA0324 & UP, 9EM1213 & UP(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERBolt (5/8 inch) 12 8T-6871Washer 12 8T-4122Guard As. Rear Sides 4 155-2742Bolt (5/8 inch) 12 7X-0345Washer 12 8T-4122

D8N TRACK ROLLER GUARDSNON-SUSPENDED UNDERCARRIAGE

1XJ(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 16 6Y-4006Spacer 16 3P-8283Bolt 16 7X-0383Washer 32 8T-4223Bolt 32 8C-4436

587T, 587R, 583T, 583R TRACK ROLLER GUARDS(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 138-7761Guard Assembly 4 138-7762Guard Assembly 4 138-7763Bolt 24 7X-0383Spacer 24 3P-8283Washer 24 5P-1076Bolt 24 8C-4436

D8T, D8R, D8N, 578 TRACK GUIDESBOGIE SUSPENSION

7XM, 9TC, 5TJ, 8HB, 9EM, KPZ, J8B

(PER MACHINE) QUANTITY PART NUMBERGuide 16 248-2987Bolt 32 8T-8924Washer 32 8T-4994

D8T, D8R, D8N TRACK GUIDESNON-SUSPENDED UNDERCARRIAGE

(PER MACHINE) QUANTITY PART NUMBERGuide 28 248-2987Bolt 56 8T-8924Washer 56 8T-4994

157

D8T, D8R, D8N, 587T, 587R, 583T, 583R, 578D8T, D8R, D8N BOGIE PADS

7XM, 9TC, 5TJ, 9EM, KPZ, J8B

(PER MACHINE) QUANTITY PART NUMBERBogie Pad Assembly 16 7T-4700Bolt 64 7X-0307Washer 64 8T-5360

578 BOGIE PADS8HB

(PER MACHINE) QUANTITY PART NUMBERBogie Pad Assembly 16 7T-5510Bolt 64 5P-2228Washer 64 5P-1076

D8T, D8R, D8N, 578 CARTRIDGE PINSBOGIE SUSPENSION

5TJ, 7XM, 8HB, 9EM, 9TC, KPZ, J8B

(PER MACHINE) QUANTITY PART NUMBERPin Assembly 32 7T-9307Pin Assembly (Arctic Applications) 32 266-3152Pin Assembly (Steel Mill Applications) 32 1Z-9353

D8N/R/T GENERAL DUTY TRACK GUIDES, BOGIE PADS, BOGIE PINS (etc.)Uses the same Genuine D8 Track Guides

158

D8LD8L TRACK53Y, 7JC, 7YB

8.50" (215.9 mm) PITCH – 7/8" BOLT

QUANTITY PART NUMBERLink Assembly – 45 Section 2 6I-8665 (1)

Track LinksRH Pin End Master 1 8E-4059LH Pin End Master 1 8E-4060RH Bushing End Master 1 8E-4457LH Bushing End Master 1 8E-4458RH Regular 44 8E-4505LH Regular 44 8E-4506Other ComponentsPin 44 199-2794Master Pin 1 9W-5588Bushing 45 6Y-3914Retaining Ring 2 3T-9118Seal Assembly (Rigid) 90 239-7943Thrust Ring 90 360-2308 (2)


Bolt 176 6V-1723Nut 176 7G-6442Master Bolt (Long) 2 6V-1725Master Bolt (Short) 2 6V-1724Special Set/GroupSeal Set (90 Seal Assemblies) 1 272-6013

D8L SPECIAL APPLICATION TRACK*4FB

8.50" (215.9 mm) PITCH – 7/8" BOLT

QUANTITY FORMER PART NUMBER PART NUMBERLink Assembly – 45 Section 2 – – (1)

Track LinksRH Pin End Master 1 223-1617 8E-4059LH Pin End Master 1 223-1618 8E-4060RH Bushing End Master 1 8E-4457 8E-4457LH Bushing End Master 1 8E-4458 8E-4458RH Regular 44 8E-4505 8E-4505LH Regular 44 8E-4506 8E-4506

1 Current D8L link assemblies consist of D8N components; refer to IRM UC93-6. When installing this link assembly for the first time, alsorefer to Special Instruction SEHS9720 modification requirements.


159

D8LD8L SPECIAL APPLICATION TRACK*4FB8.50" (215.9 mm) PITCH – 7/8" BOLT(Cont'd.)

QUANTITY FORMER PART NUMBER PART NUMBEROther ComponentsPin 44 6Y-2150 6Y-2150Master Pin 1 6Y-2149 6Y-2149Bushing 45 6I-8691 6I-8691Retaining Ring 2 3T-9118 3T-9118Seal Assembly 90 239-7943 239-7943Thrust Ring 90 152-8073 152-8073Stopper 45 7G-4332 7G-4332Plug 45 6Y-0473 6Y-0473Track Hardware (4)

Bolt 176 6V-1723 6V-1723Nut 176 7G-6442 7G-6442Master Bolt (Long) 2 6V-1725 6V-1725Master Bolt (Short) 2 6V-1724 6V-1724Special Set/GroupSeal Set (90 Seal Assemblies) 1 272-6013 272-6013

* Special track which includes polished pins and bushings and special high temperature oil for high speed/highdrawbar agricultural applications.

D8L TRACK SHOES8.50" (215.9 mm) PITCH – 7/8" BOLT

TYPE WIDTH PART NUMBERSuper Extreme Service (5) 24.0" (610 mm) 317-1030Extreme Service 22.0" (560 mm) 7T-2390Extreme Service 24.0" (610 mm) 7T-2392Extreme Service (Trapezoidal Opening) 24.0" (610 mm) 329-9269Extreme Service 26.0" (660 mm) 7T-2394Extreme Service (Trapezoidal Opening) 26.0" (660 mm) 329-9270Moderate Service 22.0" (560 mm) 7G-6448Moderate Service (Trapezoidal Opening) 22.0" (560 mm) 329-9271Moderate Service 24.0" (610 mm) 9P-2661Moderate Service (Trapezoidal Opening) 24.0" (610 mm) 329-9272Moderate Service 26.0" (660 mm) 9P-2665Moderate Service (Trapezoidal Opening) 26.0" (660 mm) 329-9273Moderate Service 28.0" (710 mm) 7G-6454Moderate Service (Trapezoidal Opening) 28.0" (710 mm) 329-9818

4 Not part of link assembly; required to assemble track group.5 Modified D9L ES Track Shoe Section.

160

D8LD8L TRACK SHOES8.50" (215.9 mm) PITCH – 7/8" BOLT(Cont'd.)TYPE WIDTH PART NUMBERModerate Service 36.0" (915 mm) 7T-2310Chopper (Trapezoidal Opening) 24.0" (610 mm) 8E-9799

D8L SPROCKETS(PER SIDE) QUANTITY PART NUMBERSprocket Segment (5 Tooth) 3 163-6406Sprocket Segment (4 Tooth) 3 102-6685Nut Strip 6 115-1147Nut (6) 3 7H-3608Bolt 27 5P-4130Washer 27 034-0707

D8L IDLERS(PER MACHINE) QUANTITY FORMER PART NUMBER PART NUMBERGroup 4 – 111-1730

Components of GroupIdler Assembly 1 6Y-0556 6Y-0556Bearing (7) 2 154-3298 154-3298Shaft 1 138-9712 154-3307Collar 2 – 107-3947Retainer 2 9P-0201 107-3946Thrust Washer 2 8E-6619 8E-6619Bolt 24 5P-2546 5P-2546Washer 24 3K-6113 3K-6113Stabilizer Ring 2 6T-5247 –


Toric Ring (7) 1 8P-0021 –

O-Ring (7) 1 6V-2700 –

Seal – Duo-Cone Group (Symmetric) 2 – 162-7863Toric Ring (7) 2 – 162-2167Seal – Retainer 2 8F-9516 8F-9516Seal - Collar 2 – 107-4057Stopper 1 9G-4872 9G-4872Plug 1 6Y-0473 6Y-0473Mounting Hardware (8)

6 To be used with 163-6406 Sprocket Segment. Refer to IRM UC99-8 for addition information.7 Component of preceding assembly or group; quantity shown is quantity per assembly or group.8 These components are not included in the idler group; quantities shown are required to mount each idler.

161

D8LD8L IDLERS (Cont'd.)(PER MACHINE) QUANTITY FORMER PART NUMBER PART NUMBERGroup 4 – 111-1730

End Cap (9) 2 306-9441 306-9441End Cap (10) 2 131-1650 131-1650Bolt (11) 4 6T-1139 6T-1139Bolt (12) 4 1D-4642 1D-4642Bolt (13) 4 6V-1726 6V-1726Bolt (14) 4 9W-4480 9W-4480Washer 4 3S-1349 3S-1349Insert 2 9W-4481 9W-4481Special Application Arctic Idler GroupsIdler Group (Arctic) 4 – 244-0879Seal – Duo-Cone Group (Inverted) 2 7T-5125 –

Toric Ring (15) 1 7T-1093 –

O-Ring (15) 1 6V-2700 –


D8L TRACK ROLLERS(PER MACHINE) QUANTITY PART NUMBERDouble Flange (DF) 8 246-0779 (16)


Components of GroupRoller Shell (DF) 1 246-0780Roller Shell (SF) 1 284-5456Bearing (15) 2 9W-9844Shaft 1 107-8084Collar 2 107-3945Retainer 2 107-8085Thrust Washer (17) 2 8E-7510Bolt 12 241-1855Washer 12 5P-8245Stabilizer Ring 2 –

Seal – Duo-Cone Group (Inverted) 2 –

9 Used with 1-1/8" Bolt. (Abutment Style Design)10 Used with 1" Bolt. (Abutment Style Design)11 1" - 8 x 3.82" Bolt.12 1" - 8 x 5.0" Bolt.13 1" - 14 x 3.82" Bolt.14 1-1/8" - 7 x 5.5" Bolt.15 Component of preceding assembly or group; quantity shown is quantity per assembly or group.16 Roller groups with longer retainer bolts.17 Use (1) 8P-5217 Thrust Washer and (4) 8H-4952 Dowels to repair former 9W-8048 Retainer Assembly. DO NOT DRILL AND DOWEL NEW

8E7510 Thrust Washer. See Special Instruction SEHS8515.

162

D8LD8L TRACK ROLLERS (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERToric Ring (18) 1 –

O-Ring (18) 1 –

Seal – Duo-Cone Group (Symmetric) 2 162-7862Toric Ring (18) 2 162-2166Seal – Retainer 2 5F-3106Seal – Collar 2 7J-2036Stopper 1 9G-5664Plug 1 6Y-0473Mounting Hardware (19)

End Cap (Abutment Style) 2 131-1651Bolt 4 6T-1140Washer 4 5P-8249Special Application Roller GroupsDouble Flange (DF) (Artic) 8 278-9540Single Flange (SF) (Artic) 8 278-9539Seal - Duo-Cone Group (Symmetric) (Arctic) 2 162-7862Toric Ring (Arctic) (18) 2 162-2166Double Flange (DF) (High Heat) 8 278-9541Single Flange (SF) (High Heat) 8 278-9538Seal – Duo-Cone Group (Symmetric) 2 107-4889Toric Ring (18) 2 9M-9730Seal - Retainer (High Heat) 2 4S-5898Seal – Duo-Cone Group (Inverted) 2 –


O-Ring (18) 1 –

D8L TRACK GUIDES(PER MACHINE) QUANTITY PART NUMBERGuide 16 248-2987Bolt 32 8T-8924Washer 32 8T-4994

D8L BOGIE PADS(PER MACHINE) QUANTITY PART NUMBERBogie Pad Assembly 16 7T-5510Bolt 64 0S-1621Washer 64 5P-1076

18 Component of preceding assembly or group; quantity shown is quantity per assembly or group.19 These components are not included in the roller group; quantities shown are required to mount each roller.

163

D8LD8L CARTRIDGE PINS8.50" (215.9 mm) PITCH – 7/8" BOLT

(PER MACHINE) QUANTITY PART NUMBERPin Assembly 32 7T-9307Pin Assembly (Arctic Applications) 32 266-3152Pin Assembly (Steel Mill Applications) 32 1Z-9353

164

D9T, D9R, D9ND9T, D9R, D9N TRACK

POSITIVE PIN RETENTION (PPR) TRACK1JD, 6XJ, 7TL, 8BL, ACL, ABK, RJS9.45" (240.0 mm) PITCH – 1" BOLT

QUANTITY PART NUMBERLink Assembly – 43 Section 2 199-5525Track LinksRH Pin End Master 1 250-4245LH Pin End Master 1 250-4246RH Bushing End Master 1 250-4247LH Bushing End Master 1 250-4248RH Regular 42 7T-2275LH Regular 42 7T-2276Other ComponentsPin 43 186-0780Bushing 43 186-0781Seal Assembly (Rigid) 86 207-0545Thrust Ring 86 352-9707 (1)

Retaining Ring (PPR) 86 6Y-0470Stopper 43 7G-4332Plug 43 6Y-0473Track Hardware (2)

Bolt 168 6T-2638Nut 168 7G-0343Master Bolt (Long) 2 6V-1728Master Bolt (Short) 2 7T-2283Special Sets/GroupsSeal Set (94 Seal Assemblies) 1 249-7174Retaining Ring Group (106 Retaining Rings) 1 9W-4265Thrust Ring Facing Group (3) 1 9W-9674



Link Assembly Used 199-5525Extreme Service Shoes - 22" (560 mm) 2 379-4042Extreme Service Shoe – 24" (610 mm) 2 379-4044Extreme Service Shoe – 27" (685 mm) 2 379-4054Extreme Service Shoe – 27" (685 mm) (Trap) 2 379-4058

1 352-9708 ring assembly contains two facing rings already applied to the 352-9707 thrust ring.2 Not part of link assembly; required to assemble track group.3 Contains 430 facing rings to service 2 link assemblies.

165

D9T, D9R, D9ND9T, D9R, D9N MADE TO ORDER (MTO) TRACK GROUPSTRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIESPPR TRACK(Cont'd.)

QUANTITY PART NUMBERSuper Extreme Service Shoe – 24" (610 mm) 2 379-4048Super Extreme Service Shoe – 27" (685 mm) 2 379-4060

D9T, D9R, D9N TRACKNON-POSITIVE PIN RETENTION (NON-PPR) TRACK

1JD, 6XJ, 7TL, 8BL, ACL, ABK, RJS9.45" (240.0 mm) PITCH – 1" BOLT

QUANTITY PART NUMBERLink Assembly – 43 Section 2 199-5531Track LinksRH Pin End Master 1 250-4243LH Pin End Master 1 250-4244RH Bushing End Master 1 250-4247LH Bushing End Master 1 250-4248RH Regular 42 9W-2743LH Regular 42 9W-2744Other ComponentsPin 42 199-5522Master Pin 1 199-5523Bushing 43 186-0781Seal Assembly (Rigid) 86 207-0545Thrust Ring 86 352-9707 (4)

Retaining Ring 2 6K-3631Stopper 43 7G-4332Plug 43 6Y-0473Track Hardware (5)

Bolt 168 6T-2638Nut 168 7G-0343Master Bolt (Long) 2 6V-1728Master Bolt (Short) 2 7T-2283Special Sets/GroupsSeal Set (94 Seal Assemblies) 1 249-7174


166

D9T, D9R, D9ND9T, D9R, D9N MADE TO ORDER (MTO) TRACK GROUPS

TRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIESNon-PPR TRACK

QUANTITY PART NUMBERLink Assembly Used 199-5531Super Extreme Service Shoe – 24" (610 mm) 2 228-9812

D9T, D9R, D9N TRACK SHOES9.45" (240.0 mm) PITCH – 1" BOLT

TYPE WIDTH PART NUMBERSuper Extreme Service 24.0" (610 mm) 139-0617Super Extreme Service 27.0" (685 mm) 1Q-4755Super Extreme Service (Trapezoidal Opening) 24.0" (610 mm) 244-7568Super Extreme Service (ARM) 24.0" (610 mm) 243-4365Extreme Service 22.0" (560 mm) 7T-2288Extreme Service 24.0" (610 mm) 7T-2294Extreme Service 27.0" (685 mm) 9W-2738Extreme Service (ARM) 22” (560 mm) 243-4370Extreme Service (ARM) 24.0" (610 mm) 243-4368Extreme Service (ARM) 27.0" (685 mm) 232-3326Extreme Service (Trapezoidal Opening) 24.0" (610 mm) 234-5975Extreme Service (Trapezoidal Opening) 27.0" (685 mm) 234-5974Extreme Service (Clipped Grouser) 27.0" (685 mm) 1Q-4649Extreme Service (Trapezoidal Opening) (Clipped Grouser) 30.0" (760 mm) 234-5973Moderate Service 30.0" (760 mm) 121-5907Moderate Service (Trapezoidal Opening) 30.0" (760 mm) 234-6084Chopper (Trapezoidal Opening) 26.0" (660 mm) 9U-9577

D9T, D9R, D9N SPROCKETS(PER SIDE) QUANTITY PART NUMBERSprocket Segment (Tough Steel) ( 5 Tooth) 5 278-2376Bolt 30 7T-1248Nut 30 7H-3609Washer 30 5P-8249

D9T, D9R, D9N IDLERS7TL1057-UP, 8BL1352-UP

(PER MACHINE) QUANTITYFORMER PARTNUMBER PART NUMBER

Group 4 – 125-4655Components of Group

167

D9T, D9R, D9ND9T, D9R, D9N IDLERS7TL1057-UP, 8BL1352-UP(Cont'd.)


Group 4 – 125-4655Idler Assembly 1 7T-2770 359-9579Bearing (6) 2 9W-9499 9W-9499Shaft 1 138-9378 154-3309Collar 2 – 107-3947Retainer 2 9P-0201 107-3946Thrust Washer 2 8E-6619 8E-6619Bolt 24 5P-2546 5P-2546Washer 24 3K-6113 3K-6113Stabilizer Ring 2 6T-5247 –

Seal – Duo-Cone Group (Inverted Design) 2 7T-0159 –

Toric Ring (6) 1 8P-0021 –

O-Ring (6) 1 6V-2700 –

Seal – Duo-Cone Group (Symmetric Design) 2 – 162-7863Toric Ring (6) 2 – 162-2167Seal – Retainer 2 8F-9516 8F-9516Seal – Collar 2 – 107-4057Stopper 1 9G-4872 9G-4872Plug 1 6Y-0473 6Y-0473Mounting Hardware (7)

End Cap (Two Bolt Design, Abutment Style) 2 306-9441 306-9441Bolt 4 9W-4480 9W-4480Washer 4 3S-1349 3S-1349End Cap (Three Bolt Design, Abutment Style) (8) 1 306-9443 306-9443

End Cap (Three Bolt Design, Abutment Style) (8) 1 306-9445 306-9445Bolt 6 9W-4480 9W-4480Washer 6 3S-1349 3S-1349Wedge (Use with former cap design) 2 107-8040 –

Insert 2 9W-4481 9W-4481Special Application Arctic Idler GroupsIdler Group (Arctic) 4 – 245-9942Seal – Duo-Cone Group (Inverted Design) 2 7T-5125 –

Toric Ring (6) 1 7T-1093 –

O-Ring (6) 1 6V-2700 –

Seal – Duo-Cone Group (Symmetric Design) 2 – 162-7863Toric Ring (6) 2 – 162-2167

6 Component of preceding assembly or group; quantity shown is quantity per assembly or group.7 These components are not included in the idler group; quantities shown are required to mount each idler.8 Effective serial numbers: 7TL703-UP and 8BL934-UP.

168

D9T, D9R, D9ND9T, D9R, D9N LANDFILL/SPECIAL APPLICATION IDLERS


Components of GroupIdler Assembly 1 359-9579Bearing (9) 2 9W-9499Shaft 1 154-3309Collar 2 261-9673Retainer 2 261-9672Thrust Washer 2 8E-6619Bolt 24 8C-6877Washer 24 8T-5360Plate 4 166-3324Seal – Duo-Cone Group (Symmetric Design) 2 162-7863Toric Ring (9) 2 162-2167Seal – Retainer 2 8F-9516Seal – Collar 2 107-4057Stopper 1 9G-4872Plug 1 6Y-0473Mounting Hardware (10)

End Cap (Two Bolt Design, Abutment Style) 2 306-9441Bolt 4 9W-4480Washer 4 3S-1349End Cap (Three Bolt Design, Abutment Style) (11) 1 306-9443

End Cap (Three Bolt Design, Abutment Style) (11) 1 306-9445Bolt 6 9W-4480Washer 6 3S-1349Insert 2 9W-4481Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group (Symmetric) 2 107-4889Toric Ring (9) 2 9M-9730

D9T, D9R, D9N CARRIER ROLLERS(PER MACHINE) QUANTITY PART NUMBERGroup - Single Flange (SF) 2 196-9955 (12)


End Cap 4 6T-4504Bolt 4 7X-0393Washer 4 8C-6913

9 Component of preceding assembly or group; quantity shown is quantity per assembly or group.10 These components are not included in the idler group; quantities shown are required to mount each idler.11 Effective serial numbers: 7TL703-UP and 8BL934-UP.12 Refer to Track Roller Section for component breakdown.13 These components are not included in the roller group. Quantities shown are required to mount each roller.

169

D9T, D9R, D9ND9T, D9R, D9N TRACK ROLLERS

(PER MACHINE) QUANTITYEARLY PARTNUMBER

FORMER PARTNUMBER PART NUMBER

Double Flange (DF) 8 – – 196-9954 (14)

Single Flange (SF) 8 – – 196-9955 (14)

Components of GroupRoller Shell (DF) 1 104-8577 (15) 104-8577 (15) 196-9956Roller Shell (SF) 1 104-8576 (16) 104-8576 (16) 196-9957Bearing (17) 2 9W-9844 9W-9844 9W-9844Shaft 1 8E-6643 104-3494 104-3494Retainer 2 6I-9719 107-3944 107-3944Collar 2 – 107-3945 107-3945Thrust Washer 2 8E-7510 8E-7510 8E-7510Bolt 12 0S-1595 0S-1595 241-1855Washer 12 5P-8245 5P-8245 5P-8245Stabilizer Ring 2 6T-4871 – –

Seal – Duo-Cone Group (Inverted) 2 7T-0158 – –

Toric Ring (17) 1 6P-8912 – –

O-Ring (17) 1 6V-2701 – –

Seal – Duo-Cone Group (Symmetric) 2 – 162-7862 162-7862Toric Ring (17) 2 – 162-2166 162-2166Seal – Retainer 2 5F-3106 5F-3106 5F-3106Seal – Collar 2 – 7J-2036 7J-2036Stopper 1 9G-4872 9G-4872 9G-4872Plug 1 6Y-0473 6Y-0473 6Y-0473Mounting Hardware (18)

End Cap (19) 2 131-1651 131-1651 131-1651Bolt 4 6T-1140 6T-1140 6T-1140Washer 4 5P-8249 5P-8249 5P-8249Special Application Roller GroupsDouble Flange (DF) (Arctic) 8 – – 245-9944Single Flange (SF) (Arctic) 8 – – 245-9943Seal – Duo-Cone Group (Symmetric) 2 – 162-7862 162-7862Toric Ring (17) 2 – 162-2166 162-2166Double Flange (DF) (Steel Mill) 8 – 245-9946Single Flange (SF) (Steel Mill) 8 – 245-9945Seal – Duo-Cone Group (Symmetric) 2 – 107-4889 107-4889Toric Ring (17) 2 – 9M-9730 9M-9730

14 Roller Groups with longer retainer bolt (ref IRM UC01-09), effective serial numbers ABK00471 & UP, ACL00678 & UP.15 Roller Shell canceled and replaced by (1) 196-9956 roller shell and (12) 241-1855 bolts.16 Roller Shell canceled and replaced by (1) 196-9957 roller shell and (12) 241-1855 bolts.17 Component of preceding assembly or group; quantity shown is quantity per assembly or group.18 These components are not included in the roller group; quantities shown are required to mount each roller.19 Abutment Style Design (Effective Serial Numbers 8BL1281-UP, 7TL1017-UP)

170

D9T, D9R, D9ND9T, D9R, D9N TRACK ROLLERS (Cont'd.)


FORMER PARTNUMBER PART NUMBER

Double Flange (DF) 8 – – 196-9954 (14)

Single Flange (SF) 8 – – 196-9955 (14)

Seal – Retainer 2 – 4S-5898 4S-5898Seal – Duo-Cone Group (Inverted) 2 7T-5133 – –

Toric Ring (20) 1 7T-1094 – –

O-Ring (20) 1 6V-2701 – –

D9T, D9R FLEXIBLE IDLER WEAR GUARDSABK0438-UP, ACL0656-UP

(PER MACHINE) QUANTITY PART NUMBERGuard As. Front & Rear 4 165-7855Plate 4 165-7860Bolt (5/8 inch) 12 8T-6871Washer 12 8T-4122Guard As. Rear Sides (RH) 2 165-7861Guard As. Rear Sides (LH) 2 165-7862Bolt (5/8 inch) 12 7X-0345Washer 12 8T-4122

D9T, D9R, D9N TRACK GUIDES(PER MACHINE) QUANTITY PART NUMBERGuide 16 184-4395Bolt 32 8C-6857Washer 32 8T-4994

D9T, D9R, D9N BOGIE PADS(PER MACHINE) QUANTITY PART NUMBERBogie Pad Assembly 16 7T-5419Bolt 64 5P-2228Washer 64 5P-1076

D9T, D9R, D9N CARTRIDGE PINS(PER MACHINE) QUANTITY PART NUMBERPin Assembly 32 7T-9307Pin Assembly (Arctic Applications) 32 266-3152Pin Assembly (Steel Mill Applications) 32 1Z-9353

14 Roller Groups with longer retainer bolt (ref IRM UC01-09), effective serial numbers ABK00471 & UP, ACL00678 & UP.20 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

171

D9T, D9R, D9ND9T, D9R, D9N U/C TRACK ROLLER FRAMES

CAMBER ONLY WITH ROLLERS AND IDLERSQUANTITY PART NUMBER

Right Hand U/C Track Roller Frame 1 422-7690Left Hand U/C Track Roller Frame 1 422-7691

D9T, D9R, D9N U/C TRACK ROLLER FRAMESCAMBER ONLY WITHOUT ROLLERS AND IDLERS

QUANTITY PART NUMBERRight Hand U/C Track Roller Frame 1 422-7692Left Hand U/C Track Roller Frame 1 422-7693

172

D9L, 589D9L TRACK

NON-POSITIVE PIN RETENTION (NON-PPR) TRACK14Y

9.00" (228.6 mm) PITCH – 1" BOLTQUANTITY PART NUMBER

Link Assembly – 47 Section 2 6Y-2887Track LinksRH Pin End Master 1 250-4215LH Pin End Master 1 250-4216RH Bushing End Master 1 250-4219LH Bushing End Master 1 250-4220RH Regular 46 7T-7629LH Regular 46 7T-7630Other ComponentsPin 46 6Y-2146Master Pin 1 6Y-2147Bushing 47 6Y-2141Seal Assembly (Rigid Seal) 94 207-0545Thrust Ring 94 352-9707 (1)

Retaining Ring 2 7G-7198Stopper 47 7G-4332Plug 47 6Y-0473Track Hardware (2)

Bolt 184 6V-1726Nut 184 7G-0343Master Bolt (Long) 2 6V-1728Master Bolt (Short) 2 7T-2283Special Sets/GroupsSeal Set (94 Seal Assemblies) 1 249-7174

D9L, 589 TRACKPOSITIVE PIN RETENTION (PPR) TRACK

D9L: 14Y, 589: 31Z9.00" (228.6 mm) PITCH – 1" BOLT

PARTNUMBER D9L 47 Section 589 53 Section

Link Assembly – (Quantity 2) 199-5534 199-5532Track LinksRH Pin End Master 250-4217 1 1LH Pin End Master 250-4218 1 1RH Bushing End Master 250-4219 1 1LH Bushing End Master 250-4220 1 1RH Regular 7T-4137 46 52


173

D9L, 589D9L, 589 TRACKPOSITIVE PIN RETENTION (PPR) TRACKD9L: 14Y, 589: 31Z9.00" (228.6 mm) PITCH – 1" BOLT(Cont'd.)

PARTNUMBER D9L 47 Section 589 53 Section

Link Assembly – (Quantity 2) 199-5534 199-5532LH Regular 7T-4138 46 52Other ComponentsPin 186-0780 47 53Bushing 6Y-2141 47 53Seal Assembly (Rigid Seal) 207-0545 94 106Thrust Ring 352-9707 (3) 94 106Retaining Ring (PPR) 6Y-0470 94 106Stopper 7G-4332 47 53Plug 6Y-0473 47 53Track Hardware (4)

Bolt 6V-1726 184 208Nut 7G-0343 184 208Master Bolt (Long) 6V-1728 2 2Master Bolt (Short) 7T-2283 2 2Special Sets/GroupsSeal Set (94 Seal Assemblies) 249-7174 1 1Retaining Ring Group (106 Retaining Rings) 9W-4265 1 1Thrust Ring Facing Group (5) 9W-9674 1 1

D9L MADE TO ORDER (MTO) TRACK GROUPSTRACK GROUPS NOT STOCKED IN DISTRIBUTION FACILITIES


Link Assembly Used 199-5534Extreme Service Shoe – 24" (610 mm) 2 204-9748Extreme Service Shoe – 27" (685 mm) 2 203-0944

D9L TRACK SHOES9.00" (228.6 mm) PITCH – 1" BOLT



Extreme Service 24.0" (610 mm) 3T-8493 9W-1851Extreme Service 27.0" (685 mm) 3T-8496 9W-1855Extreme Service 30.0" (760 mm) 3T-8499 9W-1852

3 352-9708 ring assembly contains two facing rings already applied to the 352-9707 thrust ring.4 Not part of link assembly; required to assemble track group.5 Contains 430 facing rings to service 2 link assemblies.

174

D9L, 589589 TRACK SHOES

9.00" (228.6 mm) PITCH – 1" BOLT



Extreme Service (Clipped Grouser) (6) 36.0" (915 mm) 3T-8502 3T-8501

D9L, 589 SPROCKETS(PER SIDE) QUANTITY PART NUMBERSprocket Segment (5 Tooth) 3 157-4292Sprocket Segment (4 Tooth) 3 102-6680Bolt 27 9W-8328Nut (7) 3 7H-3609Nut Strip 6 115-1176Washer 27 5P-6604

D9L SPROCKETConverted to D10R/N Undercarriage

(PER SIDE) QUANTITY PART NUMBERSprocket Gp (Contains 5 segments) 1 234-7703 (8)

Bolt 27 9W-8328Nut 27 7H-3609Washer 27 5P-6604

D9L, 589 IDLERS(PER MACHINE) QUANTITY PART NUMBERGroup 4 9W-6039Components of GroupIdler Assembly 1 9W-6037Bearing (9) 2 9W-4194Shaft 1 140-0291Retainer Assembly 2 142-2803Bolt 24 4K-5175Washer 24 3H-7654Stabilizer Ring 2 6T-5246Seal – Duo-Cone Group 2 7T-0157Toric Ring (9) 1 8H-2262O-Ring (9) 1 6V-2698Seal – Retainer 2 8F-8733

6 Clipped grouser, reduces snag loading.7 To be used with 157-4292 Sprocket Segment. Refer to IRM UC99-8 for additional information.8 Refer to IRM UC04-15 for further information. This segment group includes all three segments, former design required ordering the indi-

vidual "9W" segments.9 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

175

D9L, 589D9L, 589 IDLERS (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERGroup 4 9W-6039Stopper 1 9G-4872Plug 1 6Y-0473Mounting Hardware (10)

End Cap (Abutment Style) (11) 2 131-1649End Cap (Abutment Style) (12) 2 131-1649End Cap (Abutment Style) (13) 2 306-9431Bolt (11) 4 8T-4934Bolt (12) 4 2D-3424Bolt (13) 4 9W-4488Washer (11) 4 3S-1349Washer (12) 4 3S-1349Washer (13) 4 4K-0684Wedge (Use with former cap design) 2 109-8014Insert 2 9W-4489Special Application Arctic Idler GroupIdler Group 4 9W-6038Seal – Duo-Cone Group 2 6V-2614Toric Ring (14) 1 9M-9730O-Ring (14) 1 6V-2698

589 CARRIER ROLLERS(PER MACHINE) QUANTITY PART NUMBERGroup (Single Flange (SF) 2 6Y-2950 (15)


End Cap 4 6T-4964Bolt 4 7X-0444Washer 4 8T-5361

10 These components are not included in the idler group; quantities shown are required to mount each idler.11 Used with 1-1/8" – 7 bolt.12 Used with 1-1/8" – 12 bolt.13 Used with 1-1/4" – 7 bolt.14 Component of preceding assembly or group; quantity shown is quantity per assembly or group.15 Refer to track roller section for component breakdown.16 These components are not included in the roller group; quantities shown are required to mount each roller.

176

D9L, 589D9L, 589 TRACK ROLLERS

(PER MACHINE) QUANTITY PART NUMBERDouble Flange (DF) 8 (17) 6Y-2951

Single Flange (SF) 8 6Y-2950Components of GroupRoller Shell (DF) 1 6Y-2953Roller Shell (SF) 1 6Y-2952Bearing (18) 2 9W-9499Shaft 1 8E-6661Retainer 2 6Y-2946Thrust Washer 2 8E-6619Bolt 12 0S-1595Stabilizer Ring 2 6T-5247Seal – Duo-Cone Group 2 7T-0159Toric Ring (18) 1 8P-0021O-Ring (18) 1 6V-2700Seal – Retainer 2 8F-9516Stopper 1 9G-5664Plug 1 6Y-0473Mounting Hardware (19)

End Cap 2 131-1650Bolt 4 6T-1139Washer 4 3K-5234Special Application Roller GroupsDouble Flange (DF) (Arctic) 8 6Y-2949Single Flange (SF) (Arctic) 8 6Y-2948Seal – Duo-Cone Group 2 7T-5125Toric Ring (18) 1 7T-1093O-Ring (18) 1 6V-2700

D9L TRACK GUIDES(PER MACHINE) QUANTITY PART NUMBERGuide 16 184-4396Bolt 32 7X-0386Washer 32 8C-6913

17 589 Pipelayer uses 12 Double Flange groups.18 Component of preceding assembly or group; quantity shown is quantity per assembly or group.19 These components are not included in the roller group; quantities shown are required to mount each roller.

177

D9L, 589589 TRACK GUIDES

(PER MACHINE) QUANTITY PART NUMBERGuide 20 184-4396Bolt 40 7X-0386Washer 40 8C-6913

D9L BOGIE PADS(PER MACHINE) QUANTITY PART NUMBERBogie Pad Assembly 16 7T-5959Bolt 64 5P-2228Washer 64 5P-1076

589 BOGIE PADS(PER MACHINE) QUANTITY PART NUMBERBogie Pad Assembly 20 7T-5959Bolt 80 5P-2228Washer 80 5P-1076

D9L CARTRIDGE PINS(PER MACHINE) QUANTITY PART NUMBERPin Assembly 32 7T-9309Pin Assembly (Arctic Applications) 32 251-3273

589 CARTRIDGE PINS(PER MACHINE) QUANTITY PART NUMBERPin Assembly 40 7T-9309Pin Assembly (Arctic Applications) 40 251-3273

178

D10T, D10R, D10ND10T, D10R, D10N TRACKPOSITIVE PIN RETENTION (PPR) TRACK

2YD, 3SK, 3KR, AKT, RJG10.25" (260.4 mm) PITCH – 1-1/8" BOLT

QUANTITY PART NUMBERLink Assembly – 44 Section 2 380-5946Track LinksRH Pin End Master 1 398-8323LH Pin End Master 1 398-8324RH Bushing End Master 1 468-0109LH Bushing End Master 1 468-0110RH Regular 43 7T-0715LH Regular 43 7T-0716Other ComponentsPin 44 6Y-1579Bushing 44 6Y-2057Seal Assembly (Rigid) 88 222-7001Seal Assembly (Rigid) (Post Turn Seal) (1) 88 252-6327Thrust Ring 88 352-9703 (2)


Bolt 172 7T-1000Nut 172 5P-8221Master Bolt (Long) 2 372-3874Master Bolt (Short) 2 372-3875Special Sets/GroupsSeal Set (92 Seal Assemblies) 1 239-5272Seal Set (Post Turn Seal) (92 Seal Assemblies) (1) 1 252-6329Retaining Ring Group (104 Retaining Rings) 1 9W-4264Thrust Ring Facing Group 1 239-5509



Link Assembly Used 380-5946Extreme Service Shoe – 24" (610 mm) 2 380-5938Extreme Service Shoe – 28" (710 mm) 2 380-5942Extreme Service Shoe – 28" (710 mm) (Trap) 2 398-5248

1 To be used at service time (turn or reseal) if bushing end grooving doesn't exceed 50%.2 352-9704 ring assembly contains two facing rings already applied to the 352-9703 thrust ring.3 Not part of link assembly; required to assemble track group.

179

D10T, D10R, D10ND10T, D10R, D10N MADE TO ORDER (MTO) TRACK GROUPSTRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIESPPR TRACK(Cont'd.)

QUANTITY PART NUMBERExtreme Service Shoe – 31” (786 mm) 2 398-5254Super Extreme Service Shoe – 24" (610 mm) 2 380-5940Super Extreme Service Shoe – 28" (710 mm) 2 380-5944

D10T, D10R, D10N TRACK SCALLOP RESISTANT LINKSPIN RETENTION (PPR) TRACK2YD, 3SK, 3KR, AKT, RJG

10.25" (260.4 mm) PITCH – 1-1/8" BOLTQUANTITY PART NUMBER

Link Assembly – 44 Section 2 398-5234Track LinksRH Pin End Master 1 398-8323LH Pin End Master 1 398-8324RH Bushing End Master 1 468-0109LH Bushing End Master 1 468-0110RH Regular 43 320-3053LH Regular 43 320-3054Other ComponentsPin 44 6Y-1579Bushing 44 6Y-2057Seal Assembly (Rigid) 88 222-7001Seal Assembly (Rigid) (Post Turn Seal) (4) 88 252-6327Thrust Ring 88 352-9703 (5)


Bolt 172 7T-1000Nut 172 5P-8221Master Bolt (Long) 2 372-3874Master Bolt (Short) 2 372-3875Special Sets/GroupsSeal Set (92 Seal Assemblies) 1 239-5272Seal Set (Post Turn Seal) (92 Seal Assemblies) (4) 1 252-6329Retaining Ring Group (104 Retaining Rings) 1 9W-4264Thrust Ring Facing Group 1 239-5509


180

D10T, D10R, D10ND10T, D10R, D10N TRACK MADE TO ORDER (MTO)TRACK GROUPS SCALLOP RESISTANT LINKSTRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIES


Link Assembly Used 398-5234Extreme Service Shoe – 28" (710 mm) 2 398-5268Extreme Service Shoe – 28” (710 mm) (ARM) 2 398-5235Super Extreme Service Shoe – 24" (610 mm) 2 398-5264Super Extreme Service Shoe – 24" (610 mm) (ARM) 2 398-5274Super Extreme Service Shoe - Round Center Hole – 24" (610 mm) 2 398-5266Super Extreme Service Shoe – 28" (710 mm) 2 398-5270Super Extreme Service Shoe - Round Center Hole – 28" (710 mm) 2 398-5272

D10T, D10R, D10N TRACKNON-POSITIVE PIN RETENTION (NON-PPR) TRACK

2YD, 3SK, 3KR, RJG10.25" (260.4 mm) PITCH – 1-1/8" BOLT

QUANTITY PART NUMBERLink Assembly – 44 Section 2 398-5236Track LinksRH Pin End Master 1 467-1381LH Pin End Master 1 467-1382RH Bushing End Master 1 468-0109LH Bushing End Master 1 468-0110RH Regular 43 9W-5265LH Regular 43 9W-5266Other ComponentsPin 43 6Y-1578Master Pin 1 6Y-1577Bushing 44 6Y-2057Seal Assembly (Rigid) 88 222-7001Seal Assembly (Rigid) (Post Turn Seal) (7) 88 252-6327Thrust Ring 88 352-9703Retaining Ring 2 9W-6854Stopper 44 7G-4332Plug 44 6Y-0473Track Hardware (8)

Bolt 172 7T-1000Nut 172 5P-8221Master Bolt (Long) 2 372-3874Master Bolt (Short) 2 372-3875

7 To be used at service time (turn or reseal) if bushing end grooving doesn't exceed 50%.8 Not part of link assembly; required to assemble track group.

181

D10T, D10R, D10ND10T, D10R, D10N TRACKNON-POSITIVE PIN RETENTION (NON-PPR) TRACK2YD, 3SK, 3KR, RJG10.25" (260.4 mm) PITCH – 1-1/8" BOLT(Cont'd.)

QUANTITY PART NUMBERLink Assembly – 44 Section 2 398-5236Special Sets/GroupsSeal Set (92 Seal Assemblies) 1 239-5272Seal Set (Post Turn Seal) (92 Seal Assemblies) (9) 1 252-6329

D10T, D10R, D10N TRACK SHOES10.25" (260.4 mm) PITCH – 1-1/8" BOLT


FORMERMASTER SHOE

PARTNUMBER (10)

MASTER SHOEPART

NUMBER (11)JOINT 2 SHOE PART

NUMBER (12)

Super Extreme Service 24.0" (610 mm) 276-2414 276-2416 373-7407 373-7406Super Extreme Service 28.0" (710 mm) 276-2417 276-2418 373-7409 373-7408Super Extreme Service(ARM)

24.0" (610 mm) 228-7597 228-7598 398-5257 398-5256

Super Extreme Service(ARM)

28.0" (710 mm) 226-0268 226-0269 433-6741 433-6740

Super Extreme Service –Round Center Hole

24.0" (610 mm) 384-3018 384-3019 398-8315 398-8314

Super Extreme Service –Round Center Hole

28.0" (710 mm) 384-3022 384-3022 398-8317 398-8316

Extreme Service 24.0" (610 mm) 7T-0724 9W-1867 339-9667 339-9666Extreme Service 28.0" (710 mm) 7T-4607 9W-1870 373-7411 373-7410Extreme Service 30.0" (760 mm) 6Y-2534 6Y-2536 398-5282 398-5281Extreme Service (ClippedGrouser)

30.0" (760 mm) 1Q-4651 6Y-2536 398-5282 398-5281

Extreme Service 31.0" (786 mm) 307-2004 307-2005 398-5286 398-5285Extreme Service (ARM) 24.0" (610 mm) 239-2309 239-2310 433-6743 433-6742Extreme Service (ARM) 28.0" (710 mm) 209-4542 209-4541 398-8319 398-8318Extreme Service (ARM) 30.0" (760 mm) 243-4372 243-4373 433-6745 433-6744Extreme Service (ARM) 31.0" (786 mm) 307-2009 307-2010 398-5290 398-5289Extreme Service(Trapezoidal Opening)

24.0" (610 mm) 234-6033 234-6029 398-5278 398-5277

Extreme Servic(Trapezoidal Opening)

28.0" (710 mm) 234-6031 234-6030 398-5280 398-5279

Extreme Service(Trapezoidal Opening)

31.0" (786 mm) 307-2007 307-2008 398-5288 398-5287

9 To be used at service time (turn or reseal) if bushing end grooving doesn't exceed 50%.10 Used with Former 5 Tooth masters.11 Used with Single Tooth masters.12 Used on full link adjacent to Single Tooth bushing end master links.

182

D10T, D10R, D10ND10T, D10R, D10N SPROCKETS

(PER SIDE) QUANTITY PART NUMBERSprocket Segment (Tough Steel) (5 Tooth) 5 278-2374Bolt 30 5P-5422Nut 30 2M-5656Washer 30 5P-8250

D10T, D10R, D10N SPROCKETSSOUND REDUCED

(PER SIDE) QUANTITY PART NUMBERSprocket Segment (Tough Steel) (5 Tooth) 5 278-2352Bolt 30 5P-5422Nut 30 2M-5656Washer 30 5P-8250

D10T, D10R, D10N IDLERS3KR1178-UP

INTRODUCTION OF SYMMETRIC SEAL DESIGN


Group 4 – 125-3537Components of GroupIdler Assembly 1 7T-0961 332-6008Bearing (13) 2 9W-4194 9W-4194Shaft 1 128-9693 154-3308Collar 2 – 107-9620Retainer Assembly 2 142-2803 142-2805Bolt (1/2") 24 4K-5175 4K-5175Washer 24 3H-7654 3H-7654Stabilizer Ring 2 6T-5246 –


Toric Ring (13) 1 8H-2262 –

O-Ring (13) 1 6V-2698 –

Seal – Duo-Cone Group (Symmetric) 2 – 162-7864Toric Ring (13) 2 – 162-2168Seal – Retainer 2 8F-8733 8F-8733Seal – Collar 2 – 7R-8872Stopper 1 9G-4872 9G-4872Plug 1 6Y-0473 6Y-0473Mounting Hardware (14)

End Cap (Two Bolt Design, Abutment Style) 2 306-9431 306-9431


183

D10T, D10R, D10ND10T, D10R, D10N IDLERS3KR1178-UPINTRODUCTION OF SYMMETRIC SEAL DESIGN(Cont'd.)


Group 4 – 125-3537Bolt 4 9W-4488 9W-4488Washer 4 4K-0684 4K-0684End Cap (Three Bolt Design, Abutment Style) (15) 1 306-9447 306-9447

End Cap (Three Bolt Design, Abutment Style) (15) 1 306-9449 306-9449Bolt 6 9W-4488 9W-4488Washer 6 4K-0684 4K-0684Wedge (Use with former cap design) 2 109-8014 –

Insert 2 9W-4489 9W-4489Special Application IdlersIdler Group (Arctic) 4 – 245-9947Seal – Duo-Cone Group (Inverted) 2 6V-2614 –

Toric Ring (16) 1 9M-9730 –

O-Ring (16) 1 6V-2698 –


D10T, D10R, D10N LANDFILL/SPECIAL APPLICATION IDLERS(PER MACHINE) QUANTITY PART NUMBERGroup 4 167-1946

Components of GroupIdler Assembly 1 332-6008Bearing (16) 2 9W-4194Shaft 1 154-3308Collar 2 261-9674Retainer Assembly 2 261-9675Bolt (1/2") 24 8T-4835Washer 24 8T-4223Plate 2 166-9445Seal – Duo-Cone Group (Symmetric) 2 162-7864Toric Ring (16) 2 162-2168Seal – Retainer 2 8F-8733Seal – Collar 2 7R-8872Stopper 1 9G-4872Plug 1 6Y-0473

15 Effective serial numbers: 3KR395-UP.16 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

184

D10T, D10R, D10ND10T, D10R, D10N LANDFILL/SPECIAL APPLICATION IDLERS (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERGroup 4 167-1946Mounting Hardware (17)

End Cap (Two Bolt Design, Abutment Style) 2 306-9431Bolt 4 9W-4488Washer 4 4K-0684End Cap (Three Bolt Design, Abutment Style) (18) 1 306-9447

End Cap (Three Bolt Design, Abutment Style) (18) 1 306-9449Bolt 6 9W-4488Washer 6 4K-0684Insert 2 9W-4489

D10T, D10R, D10N IDLERSSOUND REDUCED


Components of GroupIdler Assembly 1 257-9829Bearing (19) 2 9W-4194Segment Assembly 16 234-8877Segment Assembly (Position over slot in idler assembly) 4 258-4806

Bar (Install in slots with segment assembly 258-4806) 2 257-9827Guide 6 234-8881Bolt (1 1/4") (Guide to Segment Assemblies) 24 136-4188Washer 24 4K-0684Shaft 1 154-3308Collar 2 107-9620Retainer Assembly 2 142-2805Bolt (1/2") 24 6J-2515Washer 24 3H-7654Seal – Duo-Cone Group (Symmetric) 2 162-7864Toric Ring (19) 2 162-2168Seal – Retainer 2 8F-8733Seal – Collar 2 7R-8872Stopper 1 9G-4872Plug 1 6Y-0473Mounting Hardware (17)

End Cap (Two Bolt Design, Abutment Style) 2 306-9431Bolt 4 9W-4488

17 These components are not included in the idler group; quantities shown are required to mount each idler.18 Effective serial numbers: 3KR395-UP.19 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

185

D10T, D10R, D10ND10T, D10R, D10N IDLERSSOUND REDUCED(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERGroup 4 198-7309Washer 4 4K-0684End Cap (Three Bolt Design, Abutment Style) (20) 1 306-9447

End Cap (Three Bolt Design, Abutment Style) (20) 1 306-9449Bolt 6 9W-4488Washer 6 4K-0684Insert 2 9W-4489



End Cap 4 6T-4964Bolt 4 7X-0444Washer 4 8T-5361

D10T, D10R, D10N TRACK ROLLERSSYMMETRIC DESIGN


FORMER PARTNUMBER

PARTNUMBER

Double Flange (DF) 8 – – 309-7678 (23)

Single Flange (SF) 8 – – 309-7679 (23)

Components of GroupRoller Shell (DF) 1 6Y-0892 (24) 6Y-0892 (24) 309-7676Roller Shell (SF) 1 6Y-0891 (25) 6Y-0891 (25) 309-7677Bearing (26) 2 9W-9499 9W-9499 9W-9499Shaft 1 146-3584 154-3306 154-3306Retainer 2 6Y-0893 107-9616 309-7680Collar 2 – 107-3947 107-3947Thrust Washer 2 8E-6619 8E-6619 8E-6619Bolt 12 0S-1595 0S-1595 241-1855Washer 12 5P-8245 5P-8245 5P-8245Stabilizer Ring 2 6T-5247 – –

Seal – Duo-Cone Group (Inverted Design) 2 7T-0159 – –

20 Effective serial numbers: 3KR395-UP.21 Refer to Track Roller Section for component breakdown.22 These components are not included in the roller group. Quantities shown are required to mount each roller.23 Roller Groups with longer retainer bolts (ref IRM UC01-09), effective serial numbers 3KR1610 & UP.24 Canceled & replaced by (1) 195-5854 roller shell & (12) 241-1855 bolts.25 Canceled & replaced by (1) 195-5853 roller shell & (12) 241-1855 bolts.26 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

186

D10T, D10R, D10ND10T, D10R, D10N TRACK ROLLERSSYMMETRIC DESIGN(Cont'd.)


FORMER PARTNUMBER

PARTNUMBER

Double Flange (DF) 8 – – 309-7678 (23)

Single Flange (SF) 8 – – 309-7679 (23)

Toric Ring (27) 1 8P-0021 – –

O-Ring (27) 1 6V-2700 – –

Seal – Duo-Cone Group (Symmetric Design) 2 – 162-7863 162-7863Toric Ring (27) 2 – 162-2167 162-2167Seal – Retainer 2 8F-9516 8F-9516 8F-9516Seal – Collar 2 – 107-4057 107-4057Stopper 1 9G-4872 9G-4872 9G-4872Plug 1 6Y-0473 6Y-0473 6Y-0473Mounting Hardware (28)

End Cap (Abutment Style) (29) 2 – 131-1650 131-1650Bolt 4 6T-1139 6T-1139 6T-1139Washer 4 3K-5234 3K-5234 3K-5234Special Application Roller GroupsDouble Flange (DF) (Arctic) 8 – – 332-6424Single Flange (SF) (Arctic) 8 – – 332-6423Seal – Duo-Cone Group (Symmetric Design) 2 – 162-7863 162-7863Toric Ring (27) 2 – 162-2167 162-2167Seal – Duo-Cone Group (Inverted Design) 2 7T-5125 – –

Toric Ring (27) 1 7T-1093 – –

O-Ring (27) 1 6V-2700 – –

D10T, D10R FLEXIBLE IDLER WEAR GUARDS3KR1600-UP, AKT0188-UP

(PER MACHINE) QUANTITY PART NUMBERGuard As. Rear (Rubber) 2 147-5331Guard As. Front (Rubber) 2 147-5332Plate 4 147-5333Bolt (5/8 inch) 12 8T-6871Washer 12 8T-4122Guard As. Rear Sides 4 147-5330Bolt (5/8 inch) 12 7X-0344Washer 12 8T-4122

23 Roller Groups with longer retainer bolts (ref IRM UC01-09), effective serial numbers 3KR1610 & UP.27 Component of preceding assembly or group; quantity shown is quantity per assembly or group.28 These components are not included in the roller group; quantities shown are required to mount each roller.29 Effective serial numbers: 3KR1111-UP.

187

D10T, D10R, D10ND10T, D10R, D10N TRACK GUIDES

(PER MACHINE) QUANTITY PART NUMBERGuide 16 184-4396Bolt 32 7X-0386Washer 32 8C-6913

D10T, D10R, D10N BOGIE PADS(PER MACHINE) QUANTITY PART NUMBERBogie Pad Assembly 16 7T-5959Bolt 64 5P-2228Washer 64 5P-1076

D10T, D10R, D10N CARTRIDGE PINS10.25" (260.4 mm) PITCH – 1-1/8" BOLT

(PER MACHINE) QUANTITY PART NUMBERPin Assembly 32 7T-9309Pin Assembly (Arctic Applications) 32 251-3273

D10T, D10R U/C TRACK ROLLER FRAMESCAMBER ONLY WITH ROLLERS AND IDLERS

QUANTITY PART NUMBERRight Hand U/C Track Roller Frame (30) 1 355-1294Left Hand U/C Track Roller Frame (30) 1 355-1295

D10T, D10R U/C TRACK ROLLER FRAMESCAMBER ONLY WITHOUT ROLLERS AND IDLERS


30 Requires short equalizer bar of 1820 mm.

188

D10D10 TRACK

POSITIVE PIN RETENTION (PPR) TRACK84W, 76X

10.25" (260.4 mm) PITCH – 1-1/8" BOLTQUANTITY PART NUMBER

Link Assembly – 46 Section 2 239-0673Track LinksRH Pin End Master 1 239-0675LH Pin End Master 1 239-0676RH Bushing End Master 1 239-0677LH Bushing End Master 1 239-0678RH Regular 45 9W-5933LH Regular 45 9W-5934Other ComponentsPin 46 6Y-1579Bushing 46 143-0746Seal Assembly (Rigid) 92 222-7001Seal Assembly (Rigid) (Post Turn Seal) (1) 92 252-6327Thrust Ring 92 352-9703 (2)


Bolt 180 5P-3868Nut 180 5P-8221Master Bolt 4 5P-8222Special Sets/GroupsSeal Set (92 Seal Assemblies) 1 239-5272Seal Set (Post Turn Seal) (92 Seal Assemblies) (1) 1 252-6329Retaining Ring Group (104 Retaining Rings) 1 9W-4264Thrust Ring Facing Group 1 239-5509

D10 TRACK SHOES10.25" (260.4 mm) PITCH – 1-1/8" BOLT

TYPE WIDTH REGULAR SHOE PART NUMBER MASTER SHOE PART NUMBERModerate Service 32.0" (810 mm) 9W-5826 9W-1999Extreme Service 28.0" (710 mm) 9W-4465 9W-1996Extreme Service 32.0" (810 mm) 9W-5828 9W-1997


189

D10D10 SPROCKETS

(PER SIDE) QUANTITY PART NUMBERSprocket Segment (5 Tooth) 3 157-4293Sprocket Segment (4 Tooth) 3 102-6683Bolt 27 5P-5422Nut Strip 6 115-1145Washer 27 7X-0612Nut (4) 3 2M-5656

D10 IDLERS(PER MACHINE) QUANTITY PART NUMBERGroup 4 6Y-0236Components of GroupIdler Assembly 1 6Y-0216Bearing (5) 2 9W-4195Shaft 1 138-4330Retainer Assembly 2 137-3384Bolt 24 4K-5175Washer 24 3H-7654Stabilizer Ring 2 6T-5245Seal – Duo-Cone Group 2 7T-0160Toric Ring (5) 1 6H-1309O-Ring (5) 1 6V-2475Seal – Retainer 2 2K-2939Stopper 1 9G-1368Plug 1 6Y-0473Mounting Hardware (6)

End Cap 2 3T-1248Bolt 4 8C-3435Washer 4 4K-0684Insert 2 3T-9075Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 6V-2615Toric Ring (5) 1 3P-1847O-Ring (5) 1 6V-2475

4 To be used with 157-4293 sprocket segment.5 Component of preceding assembly or group; quantity shown is quantity per assembly or group.6 These components are not included in the idler group; quantities shown are required to mount each idler.

190

D10D10 TRACK ROLLERS

(PER MACHINE) QUANTITY PART NUMBERDouble Flange (DF) 8 3T-9530

Single Flange (SF) 8 7T-1826Components of GroupRoller Shell (DF) 1 3T-9529Roller Shell (SF) 1 7T-1825Bearing (7) 2 9W-4194Shaft 1 8E-6653Retainer 2 6Y-2508Thrust Washer 2 8E-6644Bolt 12 0S-1585Stabilizer Ring 2 6T-5246Seal – Duo-Cone Group 2 7T-0157Toric Ring (7) 1 8H-2262O-Ring (7) 1 6V-2698Seal – Retainer 2 8F-8733Stopper 1 9G-5664Plug 1 6Y-0473Mounting Hardware (8)

End Cap 2 131-1649Bolt 4 5P-3868Washer 4 3S-1349

D10 TRACK GUIDES(PER MACHINE) QUANTITY PART NUMBERGuide 16 7T-1158Bolt 32 1D-4639

D10 BOGIE PADS(PER MACHINE) QUANTITY PART NUMBERBogie Pad Assembly 16 3P-2482Bolt 40 6K-7917Bolt 24 5K-7143Washer 64 5P-8245

D10 CARTRIDGE PINS(PER MACHINE) QUANTITY PART NUMBERPin Assembly 32 7T-9311Pin Assembly (Arctic Applications) 32 251-3280


191

D11T, D11R, D11ND11T, D11R, D11N TRACK

4HK, 74Z, 7PZ, 8ZR, 9TR, 9XR, AAF, TPB, GEB, JEL, AMA, JNS, MDG12.50" (317.5 mm) PITCH – 1-3/8" BOLT* (M36X4 BOLT)**

QUANTITYFORMER

PART NUMBER PART NUMBERLink Assembly – 41 Section 2 316-3370 (1) 353-7387 (1)

Track LinksRH Pin End Master 1 229-3525 358-6555LH Pin End Master 1 229-3526 358-6556RH Bushing End Master 1 229-3527 353-7393LH Bushing End Master 1 229-3528 353-7394RH Regular 40 6T-8049 6T-8049LH Regular 40 6T-8050 6T-8050Other ComponentsPin 41 126-5343 126-5343Bushing 41 306-9425 (2) 306-9425 (2)

Sleeve Bearing 82 215-7492 215-7492Seal Assembly (Rigid) 82 222-7007 222-7007Seal Assembly (Rigid) (Post Turn Seal) (3) 82 261-4338 261-4338Thrust Ring 82 352-9711 (4) 352-9711 (4)

Retaining Ring (PPR) 82 6Y-0472 6Y-0472Stopper 41 7G-4332 7G-4332Plug 41 6Y-0473 6Y-0473Track Hardware (5)

Bolt 160 6T-8853 (6) (7) 6T-8853 (6) (7)

Nut 160 3T-6292 3T-6292Master Bolt (Long) 2 6T-8520 (8) 360-2472 (9)

Master Bolt (Short) 2 6T-8521 (8) 360-2473 (9)

Special Sets/GroupsSeal Set (82 Seal Assemblies) 1 248-5531 248-5531Seal Set (Post Turn Seal) (82 Seal Assemblies) (3) 1 261-4408 261-4408Retaining Ring Group (82 Retaining Rings) 1 6Y-1082 6Y-1082Thrust Ring Facing Group (10) 1 9W-9621 9W-9621

* Used with Full links. Used with Former 5 tooth master links (Fine Threads)** Used with Single Tooth master links (Coarse Metric Threads)

1 Reference Service Magazine SEPD1536 for effective serial numbers.2 Bushing replacement for Non Sleeve Bearing Track order 202-0908 bushing.3 To be used at service time (turn or reseal) if bushing end grooving doesn't exceed 50%.4 352-9712 ring assembly contains two facing rings already applied to the 352-9711 thrust ring.5 Not part of link assembly; required to assemble track group.6 Special coated bolt 135-6961, available for use in high corrosion applications.7 Used with Full links8 Used with former 5 tooth master links (Fine Threads).9 Used with Single Tooth master links (Coarse Metric Threads).10 Contains 335 facing rings to service 2 link assemblies.

192

D11T, D11R, D11ND11T, D11R, D11N MADE TO ORDER (MTO) TRACK GROUPS

TRACK GROUPS NOT STOCKED IN DISTRIBUTION FACILITIESPPR TRACK

QUANTITYFORMER

PART NUMBER PART NUMBERLink Assembly Used 353-7387 (11) (316-3370) (12)

Extreme Service Shoe – 28" (710 mm) 2 375-5894 (12) 395-1044 (11)

Extreme Service Shoe – 32" (810 mm) 2 375-5914 (12) 395-1046 (11)

Extreme Service Shoe – 36" (915 mm) (Clipped) 2 375-5896 (12) 395-1048 (11)

Extreme Service Shoe (ARM) – 28" (710 mm) 2 375-5908 (12) 395-1050 (11)


D11T, D11R, D11N TRACK SCALLOP RESISTANT LINKS4HK, 74Z, 7PZ, 8ZR, 9TR, 9XR, AAF, TPB, GEB, JEL, AMA, JNS, MDG

12.50" (317.5 mm) PITCH – 1-3/8" BOLT* (M36X4 BOLT)**

QUANTITYFORMER


Track LinksRH Pin End Master 1 229-3525 358-6555LH Pin End Master 1 229-3526 358-6556RH Bushing End Master 1 229-3527 353-7393LH Bushing End Master 1 229-3528 353-7394RH Regular 40 320-3541 320-3541LH Regular 40 320-3542 320-3542Other ComponentsPin 41 126-5343 126-5343Bushing 41 306-9425 (14) 306-9425 (14)

Sleeve Bearing 82 215-7492 215-7492Seal Assembly (Rigid) 82 222-7007 222-7007Seal Assembly (Rigid) (Post Turn Seal) (15) 82 261-4338 261-4338Thrust Ring 82 352-9711 (16) 352-9711 (16)


Bolt 160 6T-8853 (18) (19) 6T-8853 (18) (19)

11 Contains Single Tooth mastersEffective serial numbers: JNS00134-Up, JEL00315-Up, AMA00486-Up, MDG00170-Up

12 Contains former 5 tooth masters.13 Reference Service Magazine SEPD1536 for effective serial numbers.14 Bushing replacement for Non Sleeve Bearing Track order 202-0908 bushing.15 To be used at service time (turn or reseal) if bushing end grooving doesn't exceed 50%.16 352-9712 ring assembly contains two facing rings already applied to the 352-9711 thrust ring.17 Not part of link assembly; required to assemble track group.18 Special coated bolt 135-6961, available for use in high corrosion applications.19 Used with Full links.

193

D11T, D11R, D11ND11T, D11R, D11N TRACK SCALLOP RESISTANT LINKS4HK, 74Z, 7PZ, 8ZR, 9TR, 9XR, AAF, TPB, GEB, JEL, AMA, JNS, MDG12.50" (317.5 mm) PITCH – 1-3/8" BOLT* (M36X4 BOLT)**(Cont'd.)

QUANTITYFORMER




Special Sets/GroupsSeal Set (82 Seal Assemblies) 1 248-5531 248-5531Seal Set (Post Turn Seal) (82 Seal Assemblies) (22) 1 261-4408 261-4408Retaining Ring Group (82 Retaining Rings) 1 6Y-1082 6Y-1082Thrust Ring Facing Group (23) 1 9W-9621 9W-9621


D11T, D11R, D11N MADE TO ORDER (MTO) TRACK GROUPS SCALLOP RESISTANT LINKSTRACK GROUPS NOT STOCKED IN DISTRIBUTION FACILITIES

PPR TRACK

QUANTITYFORMER

PART NUMBER PART NUMBERLink Assembly Used 361-6776 (24) (320-3543) (25)

Extreme Service Shoe- Round Center Hole - 28" (710 mm) 2 393-6358 (25) 399-7400 (24)

Extreme Service Shoe (Trap) (ARM) – 28" (710 mm) 2 – 415-3600Extreme Service Shoe – 32" (810 mm) 2 375-5926 (25) 398-5240 (24)

Extreme Service Shoe- Round Center Hole – 32" (810 mm) 2 393-6362 (25) 399-7402 (24)


Extreme Service Shoe-Clipped 36" (915 mm) 2 375-5928 (25) 398-5242 (24)

D11T, D11R, D11N TRACKHIGH ABRASION APPLICATION

4HK, 74Z, 7PZ, 8ZR, 9TR, 9XR, AAF, TPB, GEB, JEL, AMA, JNS, MDG12.50" (317.5 mm) PITCH – 1-3/8" BOLT* (M36X4 BOLT)**

QUANTITYFORMER PARTNUMBER PART NUMBER

Link Assembly – 41 Section 2 316-3369 (13) 369-5962 (13)

Track Links

13 Reference Service Magazine SEPD1536 for effective serial numbers.20 Used with former 5 tooth master links (Fine Threads).21 Used with Single Tooth master links (Coarse Metric Threads).22 To be used at service time (turn or reseal) if bushing end grooving doesn't exceed 50%.23 Contains 335 facing rings to service 2 link assemblies.24 Contains Single Tooth masters

Effective serial numbers: JNS00134-Up, JEL00315-Up, AMA00486-Up, MDG00170-Up25 Contains former 5 tooth masters

194

D11T, D11R, D11ND11T, D11R, D11N TRACKHIGH ABRASION APPLICATION4HK, 74Z, 7PZ, 8ZR, 9TR, 9XR, AAF, TPB, GEB, JEL, AMA, JNS, MDG12.50" (317.5 mm) PITCH – 1-3/8" BOLT* (M36X4 BOLT)**(Cont'd.)

QUANTITYFORMER PARTNUMBER PART NUMBER

Link Assembly – 41 Section 2 316-3369 (26) 369-5962 (26)

RH Pin End Master 1 231-4605 398-8325LH Pin End Master 1 231-4606 398-8326RH Bushing End Master 1 231-4607 398-8327LH Bushing End Master 1 231-4608 398-8328RH Regular 40 200-6325 200-6325LH Regular 40 200-6326 200-6326Other ComponentsPin 41 126-5343 126-5343Bushing 41 306-9425 306-9425Sleeve Bearing 82 215-7492 215-7492Seal Assembly (Rigid) 82 222-7007 222-7007Seal Assembly (Rigid) (Post Turn Seal) (26) 82 261-4338 261-4338Thrust Ring 82 352-9711 (27) 352-9711 (27)


Bolt 160 6T-8853 (29) 6T-8853 (29)



Special Sets/GroupsSeal Set (82 Seal Assemblies) 1 248-5531 248-5531Seal Set (Post Turn Seal) (82 Assemblies) (26) 1 261-4408 261-4408Retaining Ring Group (82 Retaining Rings) 1 6Y-1082 6Y-1082Thrust Ring Facing Group (32) 1 9W-9621 9W-9621


26 Reference Service Magazine SEPD1536 for effective serial numbers.26 To be used at service time (turn or reseal) if bushing end grooving doesn't exceed 50%.27 352-9712 ring assembly contains two facing rings already applied to the 352-9711 thrust ring.28 Not part of link assembly; required to assemble track group.29 Special coated bolt 135-6961, available for use in high corrosion applications.30 Used with former 5 tooth master links (Fine Threads).31 Used with Single Tooth master links (Coarse Metric Threads).32 Contains 335 facing rings to service 2 link assemblies.

195

D11T, D11R, D11ND11T, D11R, D11N MADE TO ORDER (MTO) TRACK GROUPS - HIGH ABRASION TRACK

QUANTITYFORMER

PART NUMBER PART NUMBERLink Assembly Used 369-5962 (33)316-3369 (34)


Extreme Service Shoe (Clipped) - 36" (915 mm) 2 375-5898 (34) 399-7410 (33)

D11T, D11R, D11N TRACK SHOES12.50" (317.5 mm) PITCH – 1-3/8" BOLT* (M36X4 BOLT)**

TYPE WIDTH

REGULARSHOEPART

NUMBER

FORMERMASTERSHOE PARTNUMBER (35)

MASTERSHOE PARTNUMBER (36)

JOINT 2SHOE PARTNUMBER (37)

Extreme Service 28.0" (710 mm) 310-5823 310-5824 360-2872 356-5714Extreme Service(Round Center Hole)

28.0" (710 mm) 393-6356 393-6257 375-5900 375-5889

Extreme Service 32.0" (810 mm) 310-5825 310-5826 360-2873 356-5716Extreme Service(Round Center Hole)

32.0" (810 mm) 393-6360 393-6361 384-3017 384-3014

Extreme Service (Clipped Grouser) 36.0" (915 mm) 310-5827 310-5828 360-2874 356-5718Extreme Service (ARM) 28.0" (710 mm) 310-5829 310-5830 356-5719 356-5720Extreme Service (ARM) 32.0" (810 mm) 310-5831 310-5832 356-5721 356-5722Extreme Service (Clipped Grouser)(ARM)

36.0" (915 mm) 310-5833 310-5834 356-5723 356-5724


28.0" (710 mm) 310-5835 310-5836 364-0851 356-5726


32.0" (810 mm) 310-5837 310-5838 356-5727 356-5728

Extreme Service (TrapezoidalOpening) (Clipped Grouser)

36.0" (915 mm) 310-5839 310-5840 356-5729 356-5730

Extreme Service(Trapezoidal Opening) (ARM)

28.0" (710 mm) 367-8463 367-8464 399-8030 399-7416


D11T, D11R, D11N SPROCKETS(PER SIDE ) QUANTITY PART NUMBERSprocket Segment (Tough Steel) (6 Tooth) 3 231-9486Sprocket Segment (Tough Steel) (5 Tooth) 1 231-9484Bolt 32 7T-1243

33 Contains Single Tooth mastersEffective serial numbers: JNS00134-Up, JEL00315-Up, AMA00486-Up, MDG00170-Up

34 Contains former 5 tooth masters35 Used with Former 5 tooth masters.36 Used with Single Tooth masters.37 Used on full link adjacent to Single Tooth bushing end master links.

196

D11T, D11R, D11ND11T, D11R, D11N SPROCKETS (Cont'd.)(PER SIDE ) QUANTITY PART NUMBERNut 32 3S-1356Washer 32 3S-1349

D11T, D11R, D11N SPROCKETSSOUND REDUCED

(PER SIDE) QUANTITY PART NUMBERSprocket Segment (Tough Steel) (6 Tooth) 3 278-2366Sprocket Segment (Tough Steel) (5 Tooth) 1 278-2365Bolt 32 7T-1243Nut 32 3S-1356Washer 32 3S-1349

D11T, D11R, D11N IDLERSWITH 5/8" RETAINER MTG BOLT


FORMER PARTNUMBER

PARTNUMBER

Group 4 – – 187-1484 (38)

Components of GroupIdler Assembly 1 – (39) 187-1011 367-3419Bearing (40) 2 258-4614 258-4614 258-4614Shaft 1 138-4331 156-5351 156-5351Collar 2 – 156-4653 156-4653Retainer Assembly (41) 2 146-5126 156-8357 188-1452Bolt (5/8") 24 7B-1115 7B-1115 031-3185Washer 24 5P-8247 5P-8247 5P-8247Stabilizer Ring 2 6T-5245 – –

Seal – Duo-Cone Group (Symmetric) 2 – 155-9879 155-9879Toric Ring (40) 2 – 160-6631 160-6631Seal – Duo-Cone Group (Inverted) 2 7T-0160 – –

Toric Ring (40) 1 6H-1309 – –

O-Ring (40) 1 6V-2475 – –

Seal – Retainer 2 2K-2939 2K-2939 2K-2939Seal – Collar 2 – 3K-0715 3K-0715Stopper 1 9G-1368 9G-1368 9G-1368Plug 1 6Y-0473 6Y-0473 6Y-0473Mounting Hardware (42)

38 Idler with longer retainer bolts (Ref IRM UC 01-05). Effective serial numbers 7PZ00388 and AAF00139.39 Idler Assembly 148-3730 canceled and replaced by: (1) Idler Assembly 187-1011, (2) Retainer Assembly 188-1452, (24) Bolts 031-318540 Component of preceding assembly or group; quantity shown is quantity per assembly or group.41 Retainer Assembly and 1/2" hardware to be used with idler assembly 148-3729; (2) Retainer Assembly 137-3384, (24) Bolts 4K-5175, (24)

Washers 3H-7654.42 These components are not included in the idler group; quantities shown are required to mount each idler.

197

D11T, D11R, D11ND11T, D11R, D11N IDLERSWITH 5/8" RETAINER MTG BOLT(Cont'd.)


FORMER PARTNUMBER

PARTNUMBER

Group 4 – – 187-1484 (38)

End Cap (Two Bolt Design, Abutment Style) (43) 2 306-9433 306-9433 306-9433Bolt 4 8T-5881 8T-5881 8T-5881Washer 4 7D-5238 7D-5238 7D-5238End Cap (Three Bolt Design, Abutment Style) (43) 1 306-9451 306-9451 306-9451

End Cap (Three Bolt Design, Abutment Style) (43) 1 306-9453 306-9453 306-9453Bolt 6 8T-5881 8T-5881 8T-5881Washer 6 7D-5238 7D-5238 7D-5238Insert 2 3T-9075 3T-9075 3T-9075Special Application Idler GroupIdler Group (Arctic) 4 – – 245-9950Seal – Duo-Cone Group (Symmetric) 2 – 155-9879 155-9879Toric Ring (44) 2 – 160-6631 160-6631Seal – Duo-Cone Group (Inverted) 2 6V-2615 – –

Toric Ring (44) 1 3P-1847 – –

O-Ring (44) 1 6V-2475 – –

D11T, D11R, D11N IDLERSSOUND REDUCED


Components of GroupIdler Assembly 1 292-8088Bearing (44) 2 258-4614Segment Assembly 16 292-8084Segment Assembly (Position over slot in idler assembly) 4 292-8085

Bar (Install in slots with segment assembly 292-8085) 2 292-8081Guide 6 292-8086Bolt (1 1/4") (Guide to Segment Assemblies) 30 136-4188Washer 30 4K-0684Shaft 1 156-5351Collar 2 156-4653Retainer Assembly 2 188-1452Bolt (5/8") 24 031-3185Washer 24 5P-8247Seal – Duo-Cone Group (Symmetric) 2 155-9879

38 Idler with longer retainer bolts (Ref IRM UC 01-05). Effective serial numbers 7PZ00388 and AAF00139.43 Effective serial numbers: 4HK624-UP.44 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

198

D11T, D11R, D11ND11T, D11R, D11N IDLERSSOUND REDUCED(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERGroup 4 292-8090Toric Ring (45) 2 160-6631Seal – Retainer 2 2K-2939Seal – Collar 2 3K-0715Stopper 1 9G-1368Plug 1 6Y-0473Mounting Hardware (46)

End Cap (Two Bolt Design, Abutment Style) (47) 2 306-9433Bolt 4 8T-5881Washer 4 7D-5238End Cap (Three Bolt Design, Abutment Style) (47) 1 306-9451

End Cap (Three Bolt Design, Abutment Style) (47) 1 306-9453Bolt 6 8T-5881Washer 6 7D-5238Insert 2 3T-9075


Mounting Hardware (New Design) (49)

End Cap 2 306-9435Block 2 224-5918Bolt 4 9W-7269Washer 4 4K-0684Mounting Hardware (Former Design) (49)

End Cap 4 9W-7267Bolt 4 7X-0434Washer 4 7X-0533

45 Component of preceding assembly or group; quantity shown is quantity per assembly or group.46 These components are not included in the idler group; quantities shown are required to mount each idler.47 Effective serial number: 5HK624-UP.48 Refer to Track Roller Section for component breakdown.49 These components are not included in the roller group. Quantities shown are required to mount each roller.

199

D11T, D11R, D11ND11T, D11R, D11N TRACK ROLLERS

(PER MACHINE) QUANTITY PART NUMBERDouble Flange (DF) 8 184-6306 (50)


Single Flange (SF) (High Abrasion Applications) (51) 16 200-5701

Components of GroupRoller Shell (DF) 1 186-5318Roller Shell (SF) 1 186-5319Roller Shell (SF) (High Abrasion Applications) 1 200-5702Bearing (52) 2 9W-4194Shaft 1 155-2048Retainer 2 180-4995Collar 2 184-2607Thrust Washer 2 8E-6644Bolt 12 031-1382Washer 12 5P-8247Seal – Duo-Cone Group (Symmetric) 2 162-7864Toric Ring (52) 2 162-2168Seal – Retainer 2 8F-8733Seal – Collar 2 7R-8872Stopper 1 9G-4872Plug 1 6Y-0473Mounting Hardware (D11T) (Three Bolt Design) (53)

End Cap (Three Bolt Design, Abutment Style) 1 306-9455

End Cap (Three Bolt Design, Abutment Style) 1 306-9457Bolt 6 9W-7269Washer 6 4K-0684Mounting Hardware (D11R/N) (Two Bolt Design) (53)

End Cap (Two Bolt Design, Abutment Style) (54) 2 306-9435Bolt 4 9W-7269Washer 4 4K-0684Special Application Roller GroupsDouble Flange (DF) (Arctic) 8 245-9952Single Flange (SF) (Arctic) 8 245-9951Seal – Duo-Cone Group 2 162-7864Toric Ring (52) 2 162-2168

50 Effective serial numbers: 7PZ298-UP, AAF133-UP. Also refer to Service Magazine dated 02/14/00 for servicing former roller groups.51 To be used with 316-3369 Link Assembly52 Component of preceding assembly or group; quantity shown is quantity per assembly or group.53 These components are not included in the roller group; quantities shown are required to mount each roller.54 Effective serial numbers: AAF0188-UP & 7PZ0581-UP.

200

D11T, D11R, D11ND11T, D11R IDLER GUARDS7PZ1-UP, 9TR352-UP, 9XR165-UP, AAF1-UP

(PER MACHINE) QUANTITY PART NUMBERStandard Guard (Front Idlers Only)Cover 2 162-8438Bolt 10 7X-0345Attachment GuardsFlexible Guard Assembly - Rear 2 139-2016Plate 2 139-2011Bolt (Use with one piece solid design) 6 7X-0350Bolt (Use with three finger split design) 6 8T-6871Washer 6 8T-4122Side Guard Assembly - Rear 4 139-2015Bolt 12 7X-0345Washer 12 8T-4122Flexible Guard Assembly - Front 2 139-2019Plate 2 139-2011Bolt 6 8T-6871Washer 6 8T-4122

D11T, D11R, D11N TRACK GUIDES(PER MACHINE) QUANTITY PART NUMBERGuide 16 187-3298Bolt 32 8T-8927Washer 32 8T-5361

D11T, D11R, D11N BOGIE PADS(PER MACHINE) QUANTITY PART NUMBERBogie Pad Assembly 16 3P-2482Bolt 64 5P-2228Washer 64 5P-1076

D11T, D11R, D11N CARTRIDGE PINS(PER MACHINE) QUANTITY PART NUMBERPin Assembly 32 7T-9311Pin Assembly (Arctic Applications) 32 251-3280

201

D11T, D11R, D11ND11T, D11R, D11N U/C TRACK ROLLER FRAMES

CAMBER ONLY WITH ROLLERS AND IDLERSQUANTITY PART NUMBER

Right Hand U/C Track Roller Frame (55) 1 337-0988Left Hand U/C Track Roller Frame (55) 1 337-0989

D11T, D11R, D11N U/C TRACK ROLLER FRAMESCAMBER ONLY WITHOUT ROLLERS AND IDLERS


55 Requires short equalizer bar of 2067.6 mm.

203

Skidders517 .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204527 .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209D4H... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216D5H... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224

204

517517 HEAVY DUTY SEALED AND LUBRICATED TRACK

5WW1-UP, 6PW1-UP7.50" (190.5 mm) PITCH – 3/4" BOLT

PARTNUMBER

7 Roller Frame42 Section


Link Assembly (Quantity 2) 106-1638 148-2465Components of Link AssemblyTrack LinksRH Pin End Master 106-1627 1 1LH Pin End Master 106-1628 1 1RH Bushing End Master 106-1629 1 1LH Bushing End Master 106-1630 1 1RH Regular 106-1625 41 43LH Regular 106-1626 41 43Other ComponentsPin 154-7311 42 44Bushing 106-1618 42 44Seal Assembly (Rigid) 250-3988 84 88Thrust Ring 152-8070 84 88Stopper 5G-2247 42 44Plug 6Y-0473 42 44Track Hardware (1)

Bolt 6V-1792 164 172Nut 1S-1860 164 172Master Bolt 106-1642 2 2Master Bolt 107-0719 2 2Special Sets/GroupsSeal Set (92 Seal Assemblies) 252-7855 1 1Bushing and Seal Group (37 Sections) 115-2439 1 1

517 HEAVY DUTY TRI-LINK TRACK7.50" (190.5 mm) PITCH – 3/4" BOLT

PARTNUMBER



Link Assembly – 44 Section 106-1638 148-2465Track LinksRH Pin End Master 106-1627 1 (2) 1 (2)

LH Pin End Master 106-1628 1 (3) 1 (3)

RH Bushing End Master 106-1629 1 (2) 1 (2)

LH Bushing End Master 106-1630 1 (3) 1 (3)

RH Regular 106-1625 43 (2) 43 (2)

LH Regular 106-1626 43 (3) 43 (3)

1 Not part of link assembly; required to assemble track group.2 Required for right hand outrigger chain.3 Required for left hand outrigger chain.

205

517517 HEAVY DUTY TRI-LINK TRACK7.50" (190.5 mm) PITCH – 3/4" BOLT(Cont'd.)

PARTNUMBER



Link Assembly – 44 Section 106-1638 148-2465Other ComponentsStub Pin 106-1610 44 44Stub Bushing 107-0720 44 44Track Hardware (per side: Tri - 1 center chain & 1 outrigger) (4)

Bolt 6V-1792 258 258Nut 1S-1860 258 258Master Bolt 106-1642 3 3Master Bolt 107-0719 3 3

517 TRACK SHOES7.50" (190.5 mm) PITCH – 3/4" BOLT



Moderate Service 22" (560 mm) 106-1607 106-1613Moderate Service 24" (610 mm) 117-0615 117-0616Moderate Service (Tri) (RH) 26" (660 mm) 148-2487 148-2594Moderate Service (Tri) (LH) 26" (660 mm) 148-2494 148-2596Moderate Service (Tri) (RH) (Clipped Grouser) 30" (760 mm) 163-2922 163-2923Moderate Service (Tri) (LH) (Clipped Grouser) 30" (760 mm) 163-2924 163-2925

517 SPROCKETS(PER SIDE) QUANTITY PART NUMBERSprocket Segment (5 Tooth) 3 106-1622Sprocket Segment (4 Tooth) 2 106-1624Bolt 23 6V-0937Nut 23 7H-3607Washer 23 2S-5658

517 IDLERS(PER MACHINE) QUANTITY PART NUMBERGroup 4 8E-4007Components of GroupIdler Assembly 1 8E-4008Bearing (5) 2 9P-2245Shaft 1 8E-4017

4 Not part of link assembly; required to assemble track group.5 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

206

517517 IDLERS (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERGroup 4 8E-4007Retainer 2 9G-9349Thrust Washer 2 106-7691Bolt 24 0S-1594Washer 24 5M-2894Stabilizer Ring 2 6T-4871Seal – Duo-Cone™ Group 2 7T-0158Toric Ring (6) 1 6P-8912O-Ring (6) 1 6V-2701Seal – O-Ring 2 2H-3928Stopper 1 9G-5664Plug 1 6Y-0473Mounting Hardware (7)

End Cap 2 149-1056Block 2 149-1054Bolt (20 mm) 4 8T-0655Washer 4 8T-3282

517 TRACK ROLLERS(PER MACHINE) QUANTITY PART NUMBERDouble Flange (DF) - (8) 149-1051 (9)



Roller Shell (SF) 1 121-0825 (10)


End Collar 2 149-1049Ring (Retaining-Snap) 2 121-1257Ring (Lock) 2 6H-7382Seal - Duo-Cone Group 2 9W-5224Toric Ring (6) 2 1M-3097

6 Component of preceding assembly or group; quantity shown is quantity per assembly or group.7 Not part of idler group; quantities required to mount each idler.8 517 with 7 track rollers - SDSDSDS - Requires 6 DF; 517 with 8 track rollers - SDSDDSDS - Requires 8 DF.9 Serviced Replaced By: 1 - Roller Group (DF) 310-4915, 2 - End Cap 322-4691, 4 - Bolt 6V-3669, 4 - Washer 8T-3282. Metric10 Serviced Replaced By: 1 - Roller Group (SF) 310-4912, 2 - End Cap 322-4691, 4 - Bolt 6V-3669, 4 - Washer 8T-3282. Metric11 Serviced Replaced By: 1 - Roller Group (DF) 310-4915, 2 - End Cap 322-4691, 4 - Bolt 6V-3669, 4 - Washer 8T-3282. Metric Hardware Serv-

iced Replaced By: 1 - Roller Group (DF) 310-4915, 2 - End Cap 322-4691, 4 - Bolt 6V-3669, 4 - Washer 8T-3282 or Serviced Replaced By: 1 -Roller Group (SF) 310-4912, 2 - End Cap 322-4691, 4 - Bolt 6V-3669, 4 - Washer 8T-3282. Metric Hardware Serviced Replaced By: 1 - RollerGroup (SF) 310-4912, 2 - End Cap 322-4691, 4 - Bolt 6V-3669, 4 - Washer 8T-3282. or Serviced Replaced By: 1 - Roller Group (DF) 310-4918,2 - End Cap 322-4691, 4 - Bolt 6V-3669, 4 - Washer 8T-3282. Metric

207

517517 TRACK ROLLERS (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERDouble Flange (DF) - (8) 149-1051 (9)


Seal - Bushing O-Ring 2 1H-6227Seal - Shaft O-Ring 2 7F-8267Stopper 1 7G-4332Plug 1 6Y-0473Mounting Hardware (12)

Bolt (20 mm) 4 6V-3669Washer 4 8T-3282

517 END GUIDING GUARDS(PER MACHINE) QUANTITY PART NUMBERFrontGuard Assembly 1 150-1989Guard Assembly 1 150-1990Wear Strip 1 8Y-1198Wear Strip 1 8Y-1199Bolt (1/2") 6 5P-2228Washer (1/2") 6 8T-4223Rear (Lower)Guard Assembly 1 147-6879Guard Assembly 1 147-6880Wear Strip 1 8Y-1198Wear Strip 1 8Y-1199Bolt (1/2") 6 5P-2228Washer (1/2") 6 8T-4223Rear (Upper)Guard Assembly 1 107-2644Guard Assembly 1 107-2645Wear Strip 2 9N-4733Bolt (1/2") 4 5P-2228Washer (1/2") 4 8T-4223

8 517 with 7 track rollers - SDSDSDS - Requires 6 DF; 517 with 8 track rollers - SDSDDSDS - Requires 8 DF.9 Serviced Replaced By: 1 - Roller Group (DF) 310-4915, 2 - End Cap 322-4691, 4 - Bolt 6V-3669, 4 - Washer 8T-3282. Metric10 Serviced Replaced By: 1 - Roller Group (SF) 310-4912, 2 - End Cap 322-4691, 4 - Bolt 6V-3669, 4 - Washer 8T-3282. Metric12 These components are not included in the roller group; quantities shown are required to mount each roller.

208

517517 TRACK ROLLER GUARDS (FULL LENGTH)

7 ROLLER FRAME(PER MACHINE) QUANTITY PART NUMBERGuard 4 155-8399Guard 4 155-8400Bolt - Mounting (20 mm) 24 6V-3531Washer (Mounting) 24 8T-3282Spacer (Cross-Tube) 12 151-0926Bolt - Cross-Tube Spacer (1") 12 6J-4081Nut (1") 12 2J-3507Plate 4 134-6093Bolt (1/2") 8 8T-8917Washer 8 8T-4223Bar (13) 8 6G-0712Bar (13) 8 9W-5449Bar (13) 4 127-0103

517 TRACK ROLLER GUARDS (FULL LENGTH)8 ROLLER FRAME

(PER MACHINE) QUANTITY PART NUMBERGuard 4 151-0924Guard 4 151-0925Bolt - Mounting (20 mm) 28 6V-3531Washer (Mounting) 28 8T-3282Spacer (Cross-Tube) 14 151-0926

Bolt - Cross-Tube Spacer (1") 14 6J-4081Nut (1") 14 2J-3507Plate 4 134-6093Bolt (1/2") 8 8T-8917Washer 8 8T-4223Bar (13) 8 6G-0712Bar (13) 8 9W-5449Bar (13) 4 127-0103

13 For use in severe skidding application. Weld to bolt heads on idler caps, end guiding guards, and guard plate.

209

527527 HEAVY DUTY SEALED AND LUBRICATED TRACK

7 ROLLER FRAME: 2RS, 3DS, 4NS 8 ROLLER FRAME: 4NS8.00" (203.2 mm) PITCH – 3/4" BOLT

PARTNUMBER

7 Roller Frame 41Section

8 Roller Frame 43Section

Link Assembly (Quantity 2) 424-0844 424-0846Components of Link AssemblyTrack LinksRH Pin End Master 8E-7407 1 1LH Pin End Master 8E-7408 1 1RH Bushing End Master 8E-7409 1 1LH Bushing End Master 8E-7410 1 1RH Regular 378-8241 40 42LH Regular 378-8242 40 42Other ComponentsPin 160-7820 (1) 41 42Bushing 8E-7222 41 42Seal Assembly (Rigid) 207-0544 82 86Thrust Ring 152-8071 82 86Stopper 5G-2247 41 42Plug 6Y-0473 41 42Track Hardware (2)

Bolt 6V-1792 160 168Nut 1S-1860 160 168Master Bolt 9S-1838 4 4Special Sets/GroupsSeal Set (92 Seal Assemblies) 256-9360 1 1Bushing and Seal Group (37 Sections) 115-2440 1 1

527 HEAVY DUTY SEALED AND LUBRICATED TRACKSUPER STEPPED BUSHING, 7 ROLLER FRAME

2RS, 3DS, BDW8.00" (203.2 mm) PITCH - 3/4" BOLT NOT FOR NACD USE

QUANTITY PART NUMBERLink Assembly – 41 Section 2 424-0845Components of Link AssemblyTrack LinksRH Pin End Master 1 8E-7407LH Pin End Master 1 8E-7408RH Bushing End Master 1 8E-7409LH Bushing End Master 1 8E-7410RH Regular 40 378-8241

1 Former pin 8E-7720 (Use 9G-1642 stopper).2 Not part of link assembly; required to assemble track group.

210

527527 HEAVY DUTY SEALED AND LUBRICATED TRACKSUPER STEPPED BUSHING, 7 ROLLER FRAME2RS, 3DS, BDW8.00" (203.2 mm) PITCH - 3/4" BOLT NOT FOR NACD USE(Cont'd.)

QUANTITY PART NUMBERLink Assembly – 41 Section 2 424-0845LH Regular 40 378-8242Other ComponentsPin 41 160-7820 (3)

Bushing 41 203-0306Seal Assembly (Rigid) 82 207-0544Thrust Ring 82 152-8071Stopper 41 5G-2247Plug 41 6Y-0473Track Hardware (4)

Bolt 160 6V-1792Nut 160 1S-1860Master Bolt 4 9S-1838Special Sets/GroupsSeal Set (92 Seal Assemblies) 1 256-9360

527 HEAVY DUTY TRI-LINK TRACK8.00" (203.2 mm) PITCH – 3/4" BOLT

PARTNUMBER



Link Assembly (Quantity 2) 424-0844 424-0846Track LinksRH Pin End Master 8E-7407 1 (5) 1 (5)

LH Pin End Master 8E-7408 1 (6) 1 (6)

RH Bushing End Master 8E-7409 1 (5) 1 (5)

LH Bushing End Master 8E-7410 1 (6) 1 (6)

RH Regular 378-8241 40 (5) 42 (5)

LH Regular 378-8242 40 (6) 42 (6)

Other ComponentsStub Pin 106-8237 41 43Stub Bushing 106-8235 41 43Track Hardware (Per side: Tri - 1 center chain & 1 outrigger) (4)

Bolt 6V-1792 240 252Nut 1S-1860 240 252Master Bolt 9S-1838 6 6

3 Former pin 8E-7720 (Use 9G-1642 stopper).4 Not part of link assembly; required to assemble track group.5 Required for right hand outrigger chain.6 Required for left hand outrigger chain.

211

527527 TRACK SHOES

8.00" (203.2 mm) PITCH – 3/4" BOLT



Extreme Service (Clipped Grouser) 23" (585 mm) 203-6580 203-7987Moderate Service 22" (560 mm) 6Y-6286 6Y-6294Moderate Service 24" (610 mm) 6Y-6287 6Y-6296Moderate Service (Tri) (RH) 26" (660 mm) 133-0248 133-0246Moderate Service (Tri) (LH) 26" (660 mm) 133-0249 133-0247Moderate Service (Tri) (RH) (Clipped Grouser) 30" (760 mm) 133-0252 133-0250Moderate Service (Tri) (LH) (Clipped Grouser) 30" (760 mm) 133-0253 133-0251

527 SPROCKETS(PER SIDE) QUANTITY PART NUMBERSprocket Segment (Tough Steel) (5 Tooth) 5 173-0946Bolt 25 6V-0937Nut 25 7H-3607Washer 25 2S-5658

527 SPROCKETSUSE WITH SUPER STEPPED BUSHING LINK ASSEMBLY

(PER SIDE) QUANTITY PART NUMBERSprocket Segment (Tough Steel) (5 Tooth) 5 202-2404Bolt 25 6V-0937Nut 25 7H-3607Washer 25 2S-5658

527 IDLERS(PER MACHINE) QUANTITY FORMER PART NUMBER PART NUMBERGroup (Small Diameter - 545 mm) 4 – 206-2087 (7)

Components of GroupIdler Assembly 1 202-4295 (7) 202-4295 (7)

Bearing (8) 1 9P-2245 9P-2245Shaft 1 138-1725 160-9359Collar 1 – 107-3945Retainer 2 9G-9349 149-2495Thrust Washer (9) 2 106-7691 106-7691Bolt 24 0S-1594 1T-0765Washer 24 5M-2894 5M-2894

7 With Increased Tread Wear Material.8 Component of preceding assembly or group; quantities shown are per assembly or group.9 Use (1) Thrust Washer and (4) 2H-1190 Dowels to repair former 9G-9350 Retainer Assembly. DO NOT DRILL AND DOWEL NEW 106-7691

Thrust Washer. See Special Instruction SEHS8515.

212

527527 IDLERS (Cont'd.)(PER MACHINE) QUANTITY FORMER PART NUMBER PART NUMBERGroup (Small Diameter - 545 mm) 4 – 206-2087 (7)

Stabilizer Ring 2 6T-4871 –

Seal - Duo-Cone Group (Inverted Seal) 2 7T-0158 –

Toric Ring (10) 1 6P-8912 –

O-Ring (10) 1 6V-2701 –

Seal - Duo-Cone Group (Symmetric Seal) 2 – 162-7862Toric Ring (10) 1 – 162-2166Seal - Retainer 2 2H-3928 2H-3928Seal - Collar 2 – 7J-2036Stopper 1 9G-5664 9G-5664Plug 1 6Y-0473 6Y-0473Mounting Hardware (Per Idler) (11)

End Cap (Abutment Style) 1 152-3421 152-3421Block 1 165-6946 165-6946Block/Cap (12) 1 138-1726 138-1726Bolt (20 mm) 4 6V-9167 6V-9167Washer (20 mm) 4 8T-3282 8T-3282Bolt (20 mm) (13) 1 6V-3531 6V-3531Washer (20 mm) (13) 1 6C-9149 6C-9149Special Application SealsSeal - Duo-Cone Group 2 7T-4722 –

Toric Ring (10) 1 7T-1094 –

O-Ring (10) 1 8T-2272 –

527 TRACK ROLLERS(PER MACHINE) QUANTITY PART NUMBERDouble Flange (DF) - (14) 243-5325


Tall Flange Double Flange (TFDF) - (15) – (16)


Roller Shell (SF) 1 120-5753 (18)

7 With Increased Tread Wear Material.10 Component of preceding assembly or group; quantities shown are per assembly or group.11 These components are not part of Idler Group; quantities required to mount each idler.12 Bolts to end of idler shaft.13 Required to secure shaft to special 138-1726 Block/Cap.14 527 Grapple with 7 rollers - SDSDSDS - requires 6 DF; 527 Grapple with 8 rollers - SDSDDSDS - requires 8 DF.15 Optional DF roller for guiding; use quantity required for standard DF.16 To equip with tall flange rollers, standard tall flange roller groups must be reworked with special 138-1721 shaft.17 Serviced Replaced By 243-5325 Double Flange Roller Group.18 Serviced Replaced By 231-3093 Single Flange Roller Group.

213

527527 TRACK ROLLERS (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERDouble Flange (DF) - (14) 243-5325


Tall Flange Double Flange (TFDF) - (15) – (16)

Roller Shell (TFDF) 1 120-5804Bushing Assembly 2 116-6698Bearing (19) 1 8P-5197Shaft (20) 1 138-1721End Collar 2 120-5785Ring (Retaining-Snap) 2 117-9748Ring (Lock) 2 5M-4443Seal - Duo-Cone Group 2 171-5882Toric Ring (19) 2 162-2166Seal - Bushing O-Ring 2 2H-3928Seal - Shaft O-Ring 2 5F-8000Stopper 1 7G-4332Plug 1 6Y-0473Mounting Hardware (21)

Dowel 7 8K-0589Bolt (20 mm) 4 6V-5845Washer (20 mm) 4 8T-3282Special Application SealsSeal - Duo-Cone Group (Steel Mill) 2 4S-8984Toric Ring (19) 2 9M-9730

527 END GUIDING GUARDS(PER MACHINE) QUANTITY PART NUMBERFrontGuard Assembly 2 130-7790Guard Assembly 2 130-7791Wear Strip 2 6Y-6382Wear Strip 2 6Y-6383Bolt (1/2") 12 5P-2228Washer (1/2") 12 8T-4223Rear (Lower)Guard Assembly 2 130-7788

14 527 Grapple with 7 rollers - SDSDSDS - requires 6 DF; 527 Grapple with 8 rollers - SDSDDSDS - requires 8 DF.15 Optional DF roller for guiding; use quantity required for standard DF.16 To equip with tall flange rollers, standard tall flange roller groups must be reworked with special 138-1721 shaft.19 Component of previous assembly or group; quantity shown is per assembly or group.20 Use dowel to secure shaft to track roller frame.21 These components are not included in the roller group; quantities shown are required to mount each roller.

214

527527 END GUIDING GUARDS (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 130-7789Wear Strip 2 6Y-6382Wear Strip 2 6Y-6383Bolt (1/2") 12 5P-2228Washer (1/2") 12 8T-4223Rear (Upper)Guard Assembly 2 130-7786Guard Assembly 2 130-7787Wear Strip 4 130-7794Bolt (1/2") 8 5P-2228Washer (1/2") 8 8T-4223


(PER MACHINE) QUANTITY PART NUMBERGuard 4 134-6091Guard 4 134-6092Bolt - Mounting (20 mm) 24 6V-3531Washer (Mounting) 24 8T-3282Spacer (Cross-Tube) 12 134-6094Bolt - Cross-Tube Spacer (1") 12 6M-2001Nut (1") 12 2J-3507Plate 4 134-6093Bolt (1/2") 8 8T-8917Washer 8 8T-4223Bar (22) 8 6G-0712Bar (22) 8 9W-5449Bar (22) 4 127-0103


(PER MACHINE) QUANTITY PART NUMBERGuard 4 148-2720Guard 4 148-2721Bolt - Mounting (20 mm) 28 6V-3531Washer (Mounting) 28 8T-3282Spacer (Cross-Tube) 14 134-6094

Bolt - Cross-Tube Spacer (1") 14 6M-2001Nut (1") 14 2J-3507

22 For use in severe skidding applications. Weld to bolt heads on idler caps, end guiding guards, and guard plate.

215

527527 TRACK ROLLER GUARDS (FULL LENGTH)8 ROLLER FRAME(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERPlate 4 134-6093Bolt (1/2") 8 8T-8917Washer 8 8T-4223Bar (23) 8 6G-0712Bar (23) 8 9W-5449Bar (23) 4 127-0103

23 For use in severe skidding applications. Weld to bolt heads on idler caps, end guiding guards, and guard plate.

216

D4HD4H TSK HEAVY DUTY SEALED AND LUBRICATED TRACK*

7PK147-UP6.75" (171.5 mm) PITCH – 5/8" BOLT

QUANTITY PART NUMBERLink Assembly – 44 Section 2 108-0954Track LinksRH Pin End Master 1 108-0949LH Pin End Master 1 108-0950RH Bushing End Master 1 108-0951LH Bushing End Master 1 108-0952RH Regular 43 108-0947LH Regular 43 108-0948Other ComponentsPin 44 108-0943Bushing 44 108-0944Seal Assembly (Rigid) 88 250-3992Thrust Ring 88 152-8069Stopper 44 5G-2247Plug 44 6Y-0473Track Hardware (1)

Bolt (Grouser shoe) 172 9G-3110Nut 172 1M-1408Master Bolt (Grouser Shoe) 2 9G-8592Master Bolt (Grouser Shoe) 2 3T-8601Master Bolt (Self-Cleaning Shoe) 2 9G-8592Master Bolt (Self-Cleaning Shoe) 2 3T-3889Special Sets/GroupsSeal Set (88 Seal Assemblies) 1 252-7856Bushing and Seal Group (39 Sections) 1 115-2438

* When installing Heavy Duty Track on existing machines (7PK1-146,8ZF,9DB) refer to IRM UC94-18 for installation forguarding information. Also refer to Special Instruction SEHS9805 for additional guarding information.

D4H TSK, D4H CUSTOM SKIDDER SEALED AND LUBRICATED TRACK7PK1-146, 8ZF1-UP, 9DB1-UP

6.75" (171.5 mm) PITCH – 5/8" BOLT

QUANTITY FORMER PART NUMBER PART NUMBERLink Assembly – 44 Section 2 – 228-2744Track LinksRH Pin End Master 1 9G-8583 6Y-9263LH Pin End Master 1 9G-8584 6Y-9264RH Bushing End Master 1 9G-8585 9G-8585LH Bushing End Master 1 9G-8586 9G-8586


217

D4HD4H TSK, D4H CUSTOM SKIDDER SEALED AND LUBRICATED TRACK7PK1-146, 8ZF1-UP, 9DB1-UP6.75" (171.5 mm) PITCH – 5/8" BOLT(Cont'd.)

QUANTITY FORMER PART NUMBER PART NUMBERLink Assembly – 44 Section 2 – 228-2744RH Regular 43 9G-8581 6Y-9261LH Regular 43 9G-8582 6Y-9262Other ComponentsPin 44 154-3664 160-7816Bushing 44 224-3959 224-3959Seal Assembly 88 3T-5634 260-8739 (2)

Thrust Ring 88 9G-8591 6Y-6486Stopper 44 5G-2247 5G-2247Plug 44 6Y-0473 6Y-0473Track Hardware (3)

Bolt (Grouser shoe) 172 9G-3110 9G-3110Nut 172 1M-1408 1M-1408Master Bolt (Grouser Shoe) 2 9G-8592 9G-8592Master Bolt (Grouser Shoe) 2 3T-8601 3T-8601Master Bolt (Self-Cleaning Shoe) 2 9G-8592 9G-8592Master Bolt (Self-Cleaning Shoe) 2 3T-3889 3T-3889Special Sets/GroupsSeal Set (88 Seal Assemblies) 1 – 252-7860Bushing and Seal Group (39 Sections) 1 6Y-3879 227-9954

D4H TSK HEAVY DUTY TRI/QUAD TRACK7PK147-UP

6.75" (171.5 mm) PITCH – 5/8" BOLT

QUAD TRACKQUANTITY

TRI TRACKQUANTITY

PARTNUMBER


Track LinksRH Regular 44 44 (5) 108-0947LH Regular 44 44 (6) 108-0948Other ComponentsStub Pin 88 44 108-2639Stub Bushing 88 44 108-2640Track Hardware (Per side: Quad – 1 center chain & 2 outriggers; Tri – 1 center chain & 1 outrigger) (3)

2 Rigid seal assembly.3 Not part of link assembly; required to assemble track group.4 Refer to Heavy Duty Track section for component information. For more information about Quad or Tri Link track, refer to IRM 91-18 and

special instruction SEHS8881.5 Required for right hand outrigger chain.6 Required for left hand outrigger chain.

218

D4HD4H TSK HEAVY DUTY TRI/QUAD TRACK7PK147-UP6.75" (171.5 mm) PITCH – 5/8" BOLT(Cont'd.)

QUAD TRACKQUANTITY

TRI TRACKQUANTITY

PARTNUMBER


Bolt 344 258 9G-3110Nut 344 258 1M-1408Master Bolt 4 3 9G-8592Master Bolt 4 3 3T-8601

D4H TSK, D4H CUSTOM SKIDDER SEALED AND LUBRICATED TRI/QUAD TRACK7PK1-146, 8ZF1-UP, 9DB1-UP

6.75" (171.5 mm) PITCH – 5/8" BOLT

QUAD TRACKQUANTITY

TRI TRACKQUANTITY

PARTNUMBER


Track LinksRH Regular 44 44 (8) 6Y-9261LH Regular 44 44 (9) 6Y-9262Other ComponentsStub Pin 88 44 6Y-9474Stub Bushing 88 44 9W-7939Track Hardware (Per side: Quad – 1 center chain & 2 outriggers; Tri – 1 center chain & 1 outrigger) (10)

Bolt 344 258 9G-3110Nut 344 258 1M-1408Master Bolt 4 3 9G-8592Master Bolt 4 3 3T-8601

D4H TSK, D4H CUSTOM SKIDDER TRACK SHOES6.75" (171.5 mm) PITCH – 5/8" BOLT

TYPE WIDTH REGULAR SHOE PART NUMBERExtreme Service 18" (460 mm) 6Y-5624Quad (MS) 23" (585 mm) 9W-7984Quad (MS) 30" (760 mm) 9W-8326Tri Offset RH (ES) 18" (460 mm) 8E-8526Tri Offset LH (ES) 18" (460 mm) 8E-8527

4 Refer to Heavy Duty Track section for component information. For more information about Quad or Tri Link track, refer to IRM 91-18 andspecial instruction SEHS8881.

7 For additional information about Quad and Tri Link Tracks refer to IRM UC91-18 and Special Instruction SEHS8881.8 Required for right hand outrigger chain.9 Required for left hand outrigger chain.10 Not part of link assembly; required to assemble track group.

219

D4HD4H TSK, D4H CUSTOM SKIDDER SPROCKETS

HEAVY DUTY / SEALED LUBRICATED TRACK

(PER SIDE) QUANTITY PART NUMBERSprocket Segment (5 Tooth) 5 108-0946Bolt 20 3S-8182Nut 20 7H-3607Washer 20 6V-4316

D4H TSK, D4H CUSTOM SKIDDER IDLERSSMALL DIAMETER

(PER MACHINE) QUANTITY FORMER PART NUMBER PART NUMBERIdler Group 4 – 190-1534 (11)


Bearing (12) 2 8P-7002 8P-7002Shaft 1 6T-2620 160-9757Collar 2 – 160-9756Retainer 2 6T-2619 160-9761Thrust Washer 2 137-9518 137-9518Bolt 12 053-2294 (13) 053-2294 (13)

Washer 12 5M-2894 5M-2894Stabilizer Ring 2 7T-4030 –


Toric Ring (12) 1 8P-7003 –

O-Ring (12) 1 6V-2699 –

Seal – Duo-Cone Group (Symmetric) 2 – 161-7247Toric Ring (14) 2 – 161-7249Seal – Retainer 2 2H-4145 2H-4145Seal – Collar 2 – 5K-0216Stopper 1 3T-9536 3T-9536Plug 1 6Y-0473 6Y-0473Mounting Hardware (15)

End Cap 2 9N-4683 9N-4683Block 2 9N-4680 9N-4680Bolt (5/8") 4 1A-8651 1A-8651Washer 4 5P-8247 5P-8247Special Application SealsSeal – Duo-Cone Group 2 7T-4086 –

11 With Increased Tread Wear Material.12 Component of preceding assembly or group; quantity shown is quantity per assembly or group.13 Use 0S-1594 bolt with former idler assembly 7T-4399.14 Component of preceding assembly or group, quantity shown is quantity per assembly or group.15 These components are not included in the idler group; quantities shown are required to mount each idler.

220

D4HD4H TSK, D4H CUSTOM SKIDDER IDLERSSMALL DIAMETER(Cont'd.)(PER MACHINE) QUANTITY FORMER PART NUMBER PART NUMBERIdler Group 4 – 190-1534 (11)

Toric Ring (16) 1 7T-4087 –

O-Ring (16) 1 6V-2699 –

D4H TSK, D4H CUSTOM SKIDDER TRACK ROLLERSCURRENT DESIGN



Double Flange (DF, Tall Flange) Roller Group - (17) 347-4170


Cap 2 248-2353Bolt (5/8") 4 1A-8537Washer 4 5P-8247

D4H TSK, D4H CUSTOM SKIDDER TRACK ROLLERSFORMER DESIGN (BOLT-ON RETAINER)

(PER MACHINE) QUANTITY FORMER PART NUMBERDouble Flange (DF) Roller Group 6 –


Components of GroupRoller Shell (DF) 1 7G-4832Roller Shell (SF) 1 7G-4833Bearing (16) 2 8P-7002Shaft 1 8E-6573Retainer Assembly 2 3T-9538 (19)

Thrust Washer (20) 1 9G-9351Dowel (20) 4 1L-5072Bolt 12 0S-1594Washer 12 5M-2894Stabilizer Ring 2 7T-4030Seal – Duo-Cone Group (Inverted) 2 7T-4080Toric Ring (16) 1 8P-7003

11 With Increased Tread Wear Material.16 Component of preceding assembly or group, quantity shown is quantity per assembly or group.17 Optional DF roller for guiding; use quantity required for specific roller frame type.18 These components are not included in the roller group; quantities shown are required to mount each roller.19 Service Replaced by 237-8201.20 These components are only to repair retainer assembly. See Special Instruction SEHS8515.

221

D4HD4H TSK, D4H CUSTOM SKIDDER TRACK ROLLERSFORMER DESIGN (BOLT-ON RETAINER)(Cont'd.)(PER MACHINE) QUANTITY FORMER PART NUMBERDouble Flange (DF) Roller Group 6 –


O-Ring (21) 1 6V-2699Seal – Retainer O-Ring 2 1H-6227Stopper 1 7G-4332Plug 1 6Y-0473Mounting Hardware (22)

End Cap 2 7G-4829Bolt (5/8") 4 1B-4367Washer 4 5P-8247Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 7T-4086Toric Ring (21) 1 7T-4087O-Ring (21) 1 6V-2699

D4H TSK END GUIDING GUARDSHEAVY DUTY TRACK ONLY

(PER MACHINE) QUANTITY PART NUMBERFrontGuard Assembly 2 108-3297Guard Assembly 2 108-3298Bolt 12 5P-2228Washer 12 8T-4223Strip 4 109-1708Strip 4 109-1709Rear (Lower)Guard Assembly 2 108-3302Guard Assembly 2 108-3303Bolt 12 5P-2228Washer 12 8T-4223Strip 4 6Y-6382Strip 4 6Y-6383Rear (Upper)Guard Assembly 2 107-2644Guard Assembly 2 107-2645Bolt 8 5P-2228

21 Component of preceding assembly or group, quantity shown is quantity per assembly or group.22 These components are not included in the roller group; quantities shown are required to mount each roller.

222

D4HD4H TSK END GUIDING GUARDSHEAVY DUTY TRACK ONLY(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERWasher 8 8T-4223Strip 4 9N-4733

D4H TSK, D4H CUSTOM SKIDDER END GUIDING GUARDSSEALED AND LUBRICATED TRACK ONLY

(PER MACHINE) QUANTITY PART NUMBERFrontGuard Assembly 2 9N-4736Guard Assembly 2 9N-4737Bolt 12 5P-2228Washer 12 8T-4223Strip 2 6Y-6380Strip 2 6Y-6381Rear (Lower)Guard Assembly 2 9N-4743Guard Assembly 2 9N-4742Bolt 12 5P-2228Washer 12 8T-4223Strip 2 6Y-6382Strip 2 6Y-6383Rear (Upper)Guard Assembly 2 9N-4741Guard Assembly 2 9N-4740Bolt 8 5P-2228Washer 8 8T-4223Strip 4 9N-4733

D4H TSK, D4H CUSTOM SKIDDER TRACK ROLLER GUARDS (FULL LENGTH)SEALED AND LUBRICATED AND HEAVY DUTY TRACK ONLY

Order cast guards from Spokan Industries (Phone: 1-800-541-3601)

D4H TSK, D4H CUSTOM SKIDDER CENTER GUIDING GUARDSSEALED AND LUBRICATED TRACK ONLY

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 6Y-9934Bolt 4 5P-4625Bolt 8 8T-8924Bolt 16 7X-3328Washer 8 8T-4122

223

D4HD4H TSK, D4H CUSTOM SKIDDER CENTER GUIDING GUARDSSEALED AND LUBRICATED TRACK ONLY(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERWasher 16 8T-4223Lock Nut 4 3K-2889Tube 4 8V-4772Bar 4 6Y-9935Spacer 8 6K-5640

D4H TSK CENTER GUIDING GUARDSHEAVY DUTY TRACK ONLY

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 108-4022Bolt 8 8T-8924Spacer 8 6K-5640

224

D5HD5H TSK HEAVY DUTY SEALED AND LUBRICATED TRACK*

7EG1113-UP7.50" (190.5 mm) PITCH – 3/4" BOLT


Bolt (Grouser shoe) 164 6V-1792Nut 164 1S-1860Master Bolt (Grouser Shoe) 2 107-0719Master Bolt (Grouser Shoe) 2 106-1642Special Sets/GroupsSeal Set (92 Seal Assemblies) 1 252-7855Bushing and Seal Group (37 Sections) 1 115-2439

* When installing Heavy Duty Track on existing machines (4KD,7EG1-1112) refer to IRMs UC93-21 and UC94-17. Master shoe required with heavy duty track. Alsorefer to Special Instruction SEHS9797 and SEHS9585 for additional guarding and track shoe rework options.

D5H TSK, D5H CUSTOM SKIDDER HYBRID TRACK4KD1-UP, 7EG1-1112

7.50" (190.5 mm) PITCH – 5/8" BOLT

QUANTITY PART NUMBERLink Assembly – 42 Section 2 238-6929Track LinksRH Pin End Master 1 244-6571LH Pin End Master 1 244-6572RH Bushing End Master 1 244-6573LH Bushing End Master 1 244-6574RH Regular 41 229-6909LH Regular 41 229-6910Other Components


225

D5HD5H TSK, D5H CUSTOM SKIDDER HYBRID TRACK4KD1-UP, 7EG1-11127.50" (190.5 mm) PITCH – 5/8" BOLT(Cont'd.)

QUANTITY PART NUMBERLink Assembly – 42 Section 2 238-6929Pin 42 160-7818 (2)

Bushing 42 229-6915Seal Assembly 84 250-3988 (3)

Thrust Ring 84 6Y-6481Stopper 42 5G-2247Plug 42 6Y-0473Track Hardware (4)

Bolt 164 9G-3110Nut 164 1M-1408Master Bolt (Grouser Shoe) 2 3T-8580Master Bolt (Grouser Shoe) 2 3T-8601Special Sets/GroupsSeal Set (92 Seal Assemblies) 1 252-7855Bushing and Seal Group (37 Sections) 1 293-9146

D5H TSK, D5H CUSTOM SKIDDER SEALED AND LUBRICATED TRACK4KD1-UP, 7EG1-1112

7.50" (190.5 mm) PITCH – 5/8" BOLT

QUANTITY FORMER PART NUMBER PART NUMBERLink Assembly – 42 Section 2 – 6Y-5413 (5)

Track LinksRH Pin End Master 1 – 8E-0885LH Pin End Master 1 – 8E-0886RH Bushing End Master 1 – 8E-0887LH Bushing End Master 1 – 8E-0888RH Regular 41 3T-8405 6Y-9267LH Regular 41 3T-8406 6Y-9268Other ComponentsPin 42 160-7818 (2) 160-7818 (2)

Bushing 42 6Y-0929 6Y-0929Seal Assembly 84 3T-5631 288-8173 (3)

Thrust Ring 84 9G-3106 6Y-6481Stopper 42 5G-2247 5G-2247Plug 42 6Y-0473 6Y-0473

2 Former pin 3P-3880 (Use 9G-1642 stopper).3 Rigid seal.4 Not part of link assembly; required to assemble track group.5 Service replaced by 238-6929 hybrid link assembly.

226

D5HD5H TSK, D5H CUSTOM SKIDDER SEALED AND LUBRICATED TRACK4KD1-UP, 7EG1-11127.50" (190.5 mm) PITCH – 5/8" BOLT(Cont'd.)

QUANTITY FORMER PART NUMBER PART NUMBERLink Assembly – 42 Section 2 – 6Y-5413 (5)

Track Hardware (6)

Bolt 164 9G-3110 9G-3110Nut 164 1M-1408 1M-1408Master Bolt (Grouser Shoe) 2 3T-8580 3T-8580Master Bolt (Grouser Shoe) 2 3T-8601 3T-8601Special Sets/GroupsSeal Set (92 Seal Assemblies) 1 – 252-7855Bushing and Seal Group (37 Sections) 1 6Y-3880 6Y-5405

D5H TSK HEAVY DUTY TRI/QUAD TRACK*7.50" (190.5 mm) PITCH – 3/4" BOLT

QUAD TRACKQUANTITY

TRI TRACKQUANTITY

PARTNUMBER


Track LinksRH Pin End Master 1 1 (8) 106-1627LH Pin End Master 1 1 (9) 106-1628RH Bushing End Master 1 1 (8) 106-1629LH Bushing End Master 1 1 (9) 106-1630RH Regular 41 41 106-1625LH Regular 41 41 106-1626Other ComponentsStub Pin 84 42 106-1610Stub Bushing 84 42 107-0720Track Hardware (Per side: Quad – 1 center chain & 2 outriggers; Tri – 1 center chain & 1 outrigger) (6)

Bolt 328 246 6V-1792Nut 328 246 1S-1860Master Bolt 4 3 106-1642Master Bolt 4 3 107-0719* When installing Heavy Duty Track on existing machines (4KD, 7EG1-1112) refer to IRM UC94-18 installation and guarding information. Also refer to Special In-struction SEHS9805 for additional guarding information and SEHS9725 for shoe rework options. For more information about Quad or Tri Link track, refer to IRM91-18 and special instruction SEHS8881. Master shoe required with heavy duty track.

5 Service replaced by 238-6929 hybrid link assembly.6 Not part of link assembly; required to assemble track group.7 Refer to Heavy Duty Track section for component information.8 Required for right hand outrigger chain.9 Required for left hand outrigger chain.

227

D5HD5H TSK, D5H CUSTOM SKIDDER SEALED AND LUBRICATED TRI/QUAD TRACK

HYBRID TRACK DESIGN7.50" (190.5 mm) PITCH – 5/8" BOLT

QUAD TRACKQUANTITY

TRI TRACKQUANTITY

PARTNUMBER

Link Assembly – 42 Section 2 2 238-6929Track LinksRH Regular 42 42 (10) 229-6909LH Regular 42 42 (11) 229-6910Other ComponentsStub Pin 84 42 9W-8182Stub Bushing 84 42 9W-8183Track Hardware (Per side: Quad – 1 center chain & 2 outriggers; Tri – 1 center chain & 1 outrigger) (12)

Bolt 328 246 9G-3110Nut 328 246 1M-1408Master Bolt 4 3 3T-8580Master Bolt 4 3 3T-8601

D5H TSK TRACK SHOESHEAVY DUTY SEALED AND LUBRICATED TRACK

7.50" (190.5 mm) PITCH – 3/4" BOLT



Extreme Service 20" (510 mm) 106-1608 106-1617Moderate Service 20" (510 mm) 106-1604 106-1612Moderate Service 22" (560 mm) 106-1607 106-1613Moderate Service 24" (610 mm) 117-0615 117-0616Quad (MS) 26" (660 mm) 115-3328 115-3329Quad (MS) 32" (810 mm) 115-3330 115-3331Quad (ES) 26" (660 mm) 117-0519 117-0520Quad (ES) (13) 26" (660 mm) 127-6254 127-6255Tri Offset RH (ES) 20" (510 mm) 107-0707 107-0708Tri Offset LH (ES) 20" (510 mm) 107-0709 107-0710Tri Offset RH (MS) 26" (660 mm) 148-2487 148-2594Tri Offset LH (MS) 26" (660 mm) 148-2494 148-2596Tri Offset RH (MS, Clipped) 30" (760 mm) 163-2922 163-2923Tri Offset LH (MS, Clipped) 30" (760 mm) 163-2924 163-2925

10 Required for right hand outrigger chain.11 Required for left hand outrigger chain.12 Not part of link assembly; required to assemble track group.13 Use with Heavy Duty Track bolt pattern for the center chain (3/4" bolt holes). Use the conventional Sealed and Lubricated Track bolt pat-

tern for the outrigger chains (5/8" bolt holes).

228

D5HD5H TSK, D5H CUSTOM SKIDDER TRACK SHOES

SEALED AND LUBRICATED TRACK7.50" (190.5 mm) PITCH – 5/8" BOLT

TYPE WIDTH REGULAR SHOE PART NUMBERExtreme Service 20" (510 mm) 6Y-9416Moderate Service 16" (405 mm) 3T-8584Moderate Service 18" (460 mm) 3T-8597Moderate Service 20" (510 mm) 3T-8586Quad (MS) 26" (660 mm) 9W-8191Quad (MS) 32" (810 mm) 9W-5187Extreme Service Tri Offset (RH) 20" (510 mm) 8E-8522Extreme Service Tri Offset (LH) 20" (510 mm) 8E-8523

D5H TSK, D5H CUSTOM SKIDDER SPROCKETS(PER SIDE) QUANTITY PART NUMBERSprocket Segment (5 Tooth) 5 106-1609Bolt 25 6V-0937Nut 25 7H-3607Washer 25 2S-5658

D5H TSK IDLERS(PER MACHINE) QUANTITY PART NUMBERGroup 4 8E-4007Components of GroupIdler Assembly 1 8E-4008Bearing (14) 2 9P-2245Shaft 1 8E-4017Retainer 2 9G-9349Thrust Washer (15) 1 106-7691Bolt 12 0S-1594Washer 12 5M-2894Stabilizer Ring 2 6T-4871Seal – Duo-Cone Group 2 7T-0158Toric Ring (14) 1 6P-8912O-Ring (14) 1 6V-2701Seal – Retainer 2 2H-3928Stopper 1 9G-5664Plug 1 6Y-0473Mounting Hardware (16)


(4) 2H-1190 Dowels to repair former 9G-9350 Retainer Assembly. DO NOT DRILL AND DOWEL NEW 106-7691 THRUST WASHER. See Spe-cial Instruction SEHS8515.

16 These components are not included in the idler group; quantities shown are required to mount each idler.

229

D5HD5H TSK IDLERS (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERGroup 4 8E-4007End Cap 2 8E-4015Block 2 8E-4023Bolt (3/4") 4 1D-4614Washer (3/4") 4 5P-8248Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 7T-4722Toric Ring (17) 1 7T-1094O-Ring (17) 1 8T-2272

D5H CUSTOM SKIDDER IDLERS


PART NUMBER PART NUMBERGroup 4 – 190-1546 (18)


Bearing (19) 2 9P-1360 9P-1360Shaft 1 6T-3285 161-7350Collar 2 – 160-9756Retainer 2 6T-3284 161-7550Thrust Washer (20) 1 110-3362 110-3362Bolt 12 053-2294 (21) 053-2294 (21)

Washer 12 5M-2894 5M-2894Stabilizer Ring 2 7T-4030 –


Toric Ring (19) 1 8P-7003 –

O-Ring (19) 1 6V-2699 –

Seal – Duo-Cone (Symmetric) 2 – 161-7247Toric Ring (19) 2 – 161-7249Seal – Retainer 2 1H-8128 1H-8128Seal – Collar 2 – 5K-0216Stopper 1 3T-9536 3T-9536Plug 1 6Y-0473 6Y-0473Mounting Hardware (22)

17 Use 0S-1594 bolt with former idler assembly 7T-4399.18 With Increased Tread Wear Material.19 Component of preceding assembly or group; quantity shown is quantity per assembly or group.20 Use (1) 9G-9351 Thrust Washer and (4) 1L-5072 Dowels to repair former 6T-3283 Retainer Assembly. Use (1) 9W-2423 Thrust Washer and

(4) 2H-1190 Dowels to repair former 9G-9350 Retainer Assembly. DO NOT DRILL AND DOWEL NEW 106-7691 THRUST WASHER. See Spe-cial Instruction SEHS8515.

21 Use 0S-1594 bolt with former idler assembly 6T-1763.22 These components are not included in the idler group; quantities shown are required to mount each idler.

230

D5HD5H CUSTOM SKIDDER IDLERS (Cont'd.)


PART NUMBER PART NUMBERGroup 4 – 190-1546 (18)

End Cap 2 9N-4683 9N-4683Block 2 9N-4680 9N-4680Bolt (5/8") 4 1A-8651 1A-8651Washer 4 5P-8247 5P-8247Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 7T-4086 –

Toric Ring (23) 1 7T-4087 –

O-Ring (23) 1 6V-2699 –

D5H TSK TRACK ROLLERSCURRENT DESIGN (END COLLARS, SYMMETRIC SEALS)

(PER MACHINE) QUANTITY PART NUMBERRoller Group (DF) / Machine 6 129-2978




Roller Shell (SF) 1 121-0825 (26)

Roller Shell (DF, Tall Flange) 1 121-0831 (27)


Ring (Retaining-Snap) 2 121-1257Ring (Lock) 2 6H-7382End Collar 2 131-9352Seal – Duo-Cone Group 2 9W-5224Toric Ring (23) 2 1M-3097Seal – Bushing O-Ring 2 1H-6227Seal – Shaft O-Ring 2 7F-8267

18 With Increased Tread Wear Material.23 Component of preceding assembly or group; quantity shown is quantity per assembly or group.24 Optional double flange roller for guiding; use quantity required for specific roller frame type.25 Serviced Replaced By: 1 - Roller Group (DF) 310-4915, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247. Metric Hardware Serv-

iced Replaced By: 1 - Roller Group (DF) 310-4915, 2 - End Cap 223-9110, 4 - Bolt 8T-0281, 4 - Washer 5P-8247.26 Serviced Replaced By: 1 - Roller Group (SF) 310-4912, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247. Metric Hardware Serv-

iced Replaced By: 1 - Roller Group (SF) 310-4912, 2 - End Cap 223-9110, 4 - Bolt 8T-0281, 4 - Washer 5P-8247.27 Serviced Replaced By: 1 - Roller Group (DF) 310-4918, 2 - End Cap 223-9110, 4 - Bolt 8T-0281, 4 - Washer 5P-8247. Metric28 Serviced Replaced By: 1 - Roller Group (DF) 310-4915, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247. Metric Hardware Serv-

iced Replaced By: 1 - Roller Group (DF) 310-4915, 2 - End Cap 223-9110, 4 - Bolt 8T-0281, 4 - Washer 5P-8247 or Serviced Replaced By: 1 -Roller Group (SF) 310-4912, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247. Metric Hardware Serviced Replaced By: 1 - RollerGroup (SF) 310-4912, 2 - End Cap 223-9110, 4 - Bolt 8T-0281, 4 - Washer 5P-8247. or Serviced Replaced By: 1 - Roller Group (DF) 310-4918,2 - End Cap 223-9110, 4 - Bolt 8T-0281, 4 - Washer 5P-8247. Metric

231

D5HD5H TSK TRACK ROLLERSCURRENT DESIGN (END COLLARS, SYMMETRIC SEALS)(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERRoller Group (DF) / Machine 6 129-2978



Stopper 1 7G-4332Plug 1 6Y-0473Mounting Hardware (29)

Bolt (3/4") 4 1D-4610Washer (3/4") 4 5P-8248

D5H CUSTOM SKIDDER TRACK ROLLERSCURRENT DESIGN (END COLLAR, SYMMETRIC SEALS)

(PER MACHINE) QUANTITY PART NUMBERRoller Group (DF) / Machine 6 121-0827 (30)

Roller Group (SF) / Machine 8 121-0824 (31)

Roller Group (DF, Tall Flange) - (32) 121-0830 (33)


Roller Shell (SF) 1 121-0825 (31)

Roller Shell (DF, Tall Flange) 1 121-0831Bushing Assembly 2 121-0834Bearing (34) 1 8P-6652Shaft 1 131-8742 (35)

Ring (Retaining-Snap) 2 121-1257Ring (Lock) 2 6H-7382End Collar 2 131-9352Seal – Duo-Cone Group 2 9W-5224Toric Ring (34) 2 1M-3097Seal – Bushing O-Ring 2 1H-6227

24 Optional double flange roller for guiding; use quantity required for specific roller frame type.29 These components are not included in the roller group; quantities shown are required to mount each roller.30 Serviced Replaced By: 1 - Roller Group (DF) 310-4915, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247. Metric Hardware Serv-


iced Replaced By: 1 - Roller Group (SF) 310-4912, 2 - End Cap 223-9110, 4 - Bolt 8T-0281, 4 - Washer 5P-8247.32 Optional double flange roller for guiding; use quanity required for specific roller frame type.33 Serviced Replaced By: 1 - Roller Group (DF) 310-4918, 2 - End Cap 223-9110, 4 - Bolt 8T-0281, 4 - Washer 5P-8247. Metric.34 Component of preceding assembly or group; quantity shown is quantity per assembly or group.35 Serviced Replaced By: 1 - Roller Group (DF) 310-4915, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247. Metric Hardware Serv-


232

D5HD5H CUSTOM SKIDDER TRACK ROLLERSCURRENT DESIGN (END COLLAR, SYMMETRIC SEALS)(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERRoller Group (DF) / Machine 6 121-0827 (30)

Roller Group (SF) / Machine 8 121-0824 (31)

Roller Group (DF, Tall Flange) - (32) 121-0830 (33)

Seal – Shaft O-Ring 2 7F-8267Stopper 1 7G-4332Plug 1 6Y-0473Mounting Hardware (36)

Bolt (5/8") 4 8S-9092Washer (5/8") 4 5P-8247

D5H TSK, D5H CUSTOM SKIDDER TRACK ROLLERSFORMER DESIGN (BOLT-ON RETAINER)

(PER MACHINE) QUANTITY PART NUMBERDouble Flange (DF) 6 –


Components of GroupRoller Shell (DF) 1 9P-1362Roller Shell (SF) 1 9P-1367Bearing (37) 2 9P-1360Shaft 1 3T-9875Retainer Assembly 2 3T-9877Thrust Washer (38) 1 9G-9351Dowel (38) 4 1L-5072Bolt 12 0S-1594Washer 12 5M-2894Stabilizer Ring 2 7T-4030Seal – Duo-Cone Group 2 7T-4080Toric Ring (37) 1 8P-7003O-Ring (37) 1 6V-2699Seal – Retainer 2 5H-6734Stopper 1 7G-4332Plug 1 6Y-0473

30 Serviced Replaced By: 1 - Roller Group (DF) 310-4915, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247. Metric Hardware Serv-iced Replaced By: 1 - Roller Group (DF) 310-4915, 2 - End Cap 223-9110, 4 - Bolt 8T-0281, 4 - Washer 5P-8247.

31 Serviced Replaced By: 1 - Roller Group (SF) 310-4912, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247. Metric Hardware Serv-iced Replaced By: 1 - Roller Group (SF) 310-4912, 2 - End Cap 223-9110, 4 - Bolt 8T-0281, 4 - Washer 5P-8247.

32 Optional double flange roller for guiding; use quanity required for specific roller frame type.33 Serviced Replaced By: 1 - Roller Group (DF) 310-4918, 2 - End Cap 223-9110, 4 - Bolt 8T-0281, 4 - Washer 5P-8247. Metric.36 These components are not included in the roller group; quantities shown are required to mount each roller.37 Component of preceding assembly or group; quantity shown is quantity per assembly or group.38 These components are only to repair retainer assembly. See Special Instruction SEHS8515.

233

D5HD5H TSK, D5H CUSTOM SKIDDER TRACK ROLLERSFORMER DESIGN (BOLT-ON RETAINER)(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERDouble Flange (DF) 6 –


Mounting Hardware (D5H TSK) (39)

End Cap (3/4") 2 8E-0301Bolt (3/4") 4 1D-4610Washer (3/4") 4 5P-8248Mounting Hardware (D5H Custom Skidder) (39)

End Cap (5/8") 2 8E-0281Bolt (5/8") 4 1B-4367Washer (5/8") 4 5P-8247Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 7T-4086Toric Ring (40) 1 7T-4087O-Ring (40) 1 6V-2699

D5H TSK END GUIDING GUARDSSEALED AND LUBRICATED AND HEAVY DUTY TRACK ONLY


Strip 2 8Y-1199 (42)

Spacer (43) 4 106-4402Rear (Lower)Guard Assembly 2 106-4372Guard Assembly 2 106-4373Bolt 12 5P-2228Washer 12 8T-4223Strip 2 8Y-1198 (41)

Strip 2 8Y-1199 (42)

Spacer (43) 4 106-4402

39 These components are not included in the roller group; quantities shown are required to mount each roller.40 Use 0S-1594 bolt with former idler assembly 7T-4399.41 Former curved strip use 8E-5399 (Ref service magazine, dated Feb 11,91).42 Former curved strip use 8E-5400 (Ref service magazine, dated Feb 11,91).43 Required for Sealed & Lubricated Track.

234

D5HD5H TSK END GUIDING GUARDSSEALED AND LUBRICATED AND HEAVY DUTY TRACK ONLY(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERRear (Upper)Guard Assembly 2 107-2644Guard Assembly 2 107-2645Bolt 8 5P-2228Washer 8 8T-4223Strip 4 9N-4733

D5H CUSTOM SKIDDER END GUIDING GUARDSSEALED AND LUBRICATED AND HEAVY DUTY TRACK ONLY


Strip 2 8Y-1199 (45)

Spacer (46) 4 106-4402Rear (Lower)Guard Assembly 2 106-4372Guard Assembly 2 106-4373Bolt 12 5P-2228Washer 12 8T-4223Strip 2 8Y-1198 (44)

Strip 2 8Y-1199 (45)

Spacer (46) 4 106-4402Rear (Upper)Guard Assembly 2 107-2644Guard Assembly 2 107-2645Bolt 8 5P-2228Washer 8 8T-4223Strip 4 9N-4733

44 Former curved strip use 8E-5399 (Ref service magazine, dated Feb 11,91).45 Former curved strip use 8E-5400 (Ref service magazine, dated Feb 11,91).46 Required for Sealed & Lubricated Track.

235

D5HD5H TSK CENTER GUIDING GUARDS

HEAVY DUTY TRACK ONLY(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 106-9982Bolt 8 7X-0347Spacer 8 8G-5258

D5H CUSTOM SKIDDER CENTER GUIDING GUARDSHEAVY DUTY TRACK ONLY


D5H TSK CENTER GUIDING GUARDSSEALED AND LUBRICATED TRACK ONLY

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 8E-9763Bolt 8 7X-0347Bolt 16 5P-2228Washer 16 8T-4223Strip 4 8G-5335Spacer 8 8G-5258

D5H LGP CUSTOM SKIDDER CENTER GUIDING GUARDSSEALED AND LUBRICATED TRACK ONLY

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 6Y-3917Bolt 16 7X-0347Bolt 6 5P-7971Bolt 24 5P-2228Washer 24 8T-4223Lock Nut 6 3K-2889Tube 6 4S-6559Strip 4 6Y-3921Spacer 16 8G-5258Washer 6 5P-8247

237

Low Sprocket TractorsD3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 238D5K, D5G, D5C ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 273D6K, PL61 .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 295D6K2 .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 299D7E ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305D4.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 310D5, 561... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 323D6.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 336D7, 571, 572.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 357D8, 583... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 372D9, 594... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 386

238

D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3D4K, D3K, D4G, D3G, D4C, D3C SEALED AND LUBRICATED TRACK

LARGE STEPPED BUSHING36 SECTION: STD (D3, D3B), LGP (D3)

37 SECTION: STD (D3C/B, D4B), LGP (D3C), SPL (D3B)39 SECTION: STD (D3C/B, D4C), LGP (D3G, D3C/B, D4C, D3), XL (D3G/C)

41 SECTION: XL/LGP (D3K), XL (D4G/C), LGP (D4G)) 43 SECTION: XL/LGP D4K6.125" (155.6 mm) PITCH - 9/16" BOLTPART

NUMBER36

SECTION37

SECTION39

SECTION41

SECTION 43 SectionLink Assembly (Quantity 2) 323-8758 323-8759 323-8757 323-8756 323-8755Track LinksRH Pin End Master 6Y-0937 1 1 1 1 1LH Pin End Master 6Y-0938 1 1 1 1 1RH Bushing End Master 6Y-0939 1 1 1 1 1LH Bushing End Master 6Y-0940 1 1 1 1 1RH Regular 6Y-0935 35 36 38 40 42LH Regular 6Y-0936 35 36 38 40 42Other ComponentsPin 303-9455 36 37 39 41 43Bushing 188-6246 36 37 39 41 43Seal Assembly (Rigid) 250-4002 72 74 78 82 86Thrust Ring 6S-9049 72 74 78 82 86Stopper 5G-2247 36 37 39 41 43Plug 6Y-0473 36 37 39 41 43Track Hardware (1)

Bolt (Grouser Shoe) 4K-7038 140 144 152 160 168Bolt (Self-Cleaning Shoe) 4K-7038 70 72 76 80 84Bolt (Self-Cleaning Shoe) 5A-3187 70 72 76 80 84Nut 7K-2017 140 144 152 160 168Master Bolt (Grouser Shoe) 5A-3187 4 4 4 4 4Master Bolt (Self-Cleaning Shoe) 5A-3187 2 2 2 2 2Master Bolt (Self-Cleaning Shoe) 5P-4683 2 2 2 2 2Special Sets/GroupsSeal Set (78 Seal Assemblies) 252-7861 1 1 1 1 1

D4K, D3K SystemOne™ TRACKTO BE WITH CENTER TREAD IDLER AND SystemOne ROLLERS

PRESS FIT MASTERD4K (38 SECTIONS)D3K (36 SECTIONS)

6.91" (175.5 mm) PITCH – 16 mm BOLTPART NUMBER 36 SECTION 38 SECTION

Link Assembly (2 Quantity) 289-3061 289-3059Components of Link AssemblyLink Box Standard 289-3057 18 19

1 Not part of link assembly, required to assemble track group.

239

D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3D4K, D3K SystemOne™ TRACKTO BE WITH CENTER TREAD IDLER AND SystemOne ROLLERSPRESS FIT MASTERD4K (38 SECTIONS)D3K (36 SECTIONS)6.91" (175.5 mm) PITCH – 16 mm BOLT(Cont'd.)

PART NUMBER 36 SECTION 38 SECTIONLink Assembly (2 Quantity) 289-3061 289-3059

Standard Link 260-6740 34 36Standard Link (Press Fit) (2) 260-6740 (3) 2 2Track Hardware (2)

Bolt (M16) (Grouser Shoe) 301-4302 144 152Nut 5I-6125 144 152Bolt (M16) (Self Cleaning Shoe 254-0228 72 76Bolt (M16) (Self Cleaning Shoe) 301-4302 72 76

D4G, D3G SystemOne TRACKTO BE USED WITH CENTER TREAD IDLERS AND SystemOne ROLLERS

PRESS FIT MASTERD3G (35 SECTIONS)D4G (37 SECTIONS)


Link Assembly (2 Quantity) 289-3062 289-3060Components of Link AssemblyLink Box Standard 289-3057 16 17Link Box Offset 289-3058 1 1Standard Link 260-6740 32 34Standard Link (Press Fit) (2) 260-6740 (3) 2 2Track Hardware (2)

Bolt (M16) 301-4302 140 148Nut 5I-6125 140 148

D3G/C, D4G/C SystemOne TRACKTO BE USED WITH CONVENTIONAL IDLERS AND STANDARD ROLLERS

PRESS FIT MASTERD3G/C (35 SECTIONS)D4G/C (36 SECTIONS)


Link Assembly (2 Quantity) 289-3062 289-3061Components of Link AssemblyLink Box Standard 289-3057 16 18Link Box Offset 289-3058 1 –

2 Not part of link assembly; required to assemble track group.3 Clamp Master links 2- 311-6180 and 4 -254-0228 Master Bolts

240

D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3D3G/C, D4G/C SystemOne TRACKTO BE USED WITH CONVENTIONAL IDLERS AND STANDARD ROLLERSPRESS FIT MASTERD3G/C (35 SECTIONS)D4G/C (36 SECTIONS)6.91" (175.5 mm) PITCH – 16 mm BOLT(Cont'd.)

PART NUMBER 35 SECTION 36 SECTIONStandard Link 260-6740 32 34Standard Link (Press Fit) (4) 260-6740 (5) 2 2Track Hardware (4)

Bolt (M16) 301-4302 140 144Nut 5I-6125 140 144

D3C/B, D4C/B, D3 SEALED AND LUBRICATED TRACK36 SECTION: STD (D3, D3B), LGP (D3)

37 SECTION: STD (D3C/B, D4B), LGP (D3C), SPL (D3B)39 SECTION: STD (D3C/B, D4C), LGP (D3C/B, D4C, D3), XL (D3C)

41 SECTION: D4C (XL)6.125" (155.6 mm) PITCH - 9/16" BOLTPART

NUMBER 36 SECTION 37 SECTION 39 SECTION 41 SECTIONLink Assembly (2 Quantity) 323-8758 323-8759 323-8757 323-8756Components of Link AssemblyTrack LinksRH Pin End Master 6Y-0937 1 1 1 1LH Pin End Master 6Y-0938 1 1 1 1RH Bushing End Master 6Y-0939 1 1 1 1LH Bushing End Master 6Y-0940 1 1 1 1RH Regular 6Y-0935 35 36 38 40LH Regular 6Y-0936 35 36 38 40Other ComponentsPin 303-9455 36 37 39 41Bushing 188-6246 36 37 39 41Seal Assembly (Rigid) 250-4002 72 74 78 82Thrust Ring 6S-9049 72 74 78 82Stopper 5G-2247 36 37 39 41Plug 6Y-0473 36 37 39 41Track Hardware (4)

Bolt 4K-7038 140 144 152 160Nut 7K-2017 140 144 152 160Master Bolt 5A-3187 4 4 4 4Special Sets/GroupsSeal Set (78 Seal Assemblies) 252-7861 1 1 1 1

4 Not part of link assembly; required to assemble track group.5 Clamp Master links 2- 311-6180 and 4 -254-0228 Master Bolts

241

D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3D3C/B, D4C/B, D3 SEALED TRACK

36 SECTION: STD (D3, D3B), LGP (D3)37 SECTION: STD (D3C/B, D4B), LGP (D3C), SPL (D3B)

39 SECTION: STD (D3C/B, D4C), LGP (D3C/B, D4C, D3), XL (D3C)41 SECTION: D4C (XL)


NUMBER 36 SECTION 37 SECTION 39 SECTION 41 SECTIONLink Assembly (2 Quantity) 6Y-1711 – (6) 6Y-1713 – (6)

Components of Link AssemblyTrack LinksRH Pin End Master 6Y-0937 1 1 1 1LH Pin End Master 6Y-0938 1 1 1 1RH Bushing End Master 6Y-0939 1 1 1 1LH Bushing End Master 6Y-0940 1 1 1 1RH Regular 6Y-0935 35 36 38 40LH Regular 6Y-0936 35 36 38 40Other ComponentsPin 6B-5278 36 37 39 41Bushing 6Y-1717 36 37 39 41Seal 6S-3146 144 148 156 164Track Hardware (7)

Bolt 4K-7038 140 144 152 160Nut 7K-2017 140 144 152 160Master Bolt 5A-3187 4 4 4 4

D3 SEALED AND LUBRICATED TRACKFORMER, STRAIGHT WALL BUSHING, SPLIT MASTER LINKS

6.125" (155.6 mm) PITCH – 9/16" BOLT


Components of Link AssemblyTrack LinksRH Pin End Master 1 6S-6889LH Pin End Master 1 6S-6890RH Bushing End Master 1 6S-6887LH Bushing End Master 1 6S-6888RH Regular 35 6S-8343LH Regular 35 6S-8344Other ComponentsPin 36 303-9455Bushing 36 6S-9051

6 Order 36 Section 6Y-1711 or 39 Section 6Y-1713 Link Assembly and add or remove appropriate number of sections.7 Not part of link assembly; required to assemble track group.8 For 36 or 39 section link assemblies, upgrade by ordering 36 section 323-8758 or 39 section 323-8757 link assembly. This will require or-

dering new shoes to be used with "6Y" track links.

242

D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3D3 SEALED AND LUBRICATED TRACKFORMER, STRAIGHT WALL BUSHING, SPLIT MASTER LINKS6.125" (155.6 mm) PITCH – 9/16" BOLT(Cont'd.)


Seal Assembly (Rigid) 72 250-4002Thrust Ring 72 6S-9049Stopper 36 5G-2247Plug 36 6Y-0473Track Hardware (9)

Bolt 140 4K-7038Nut 140 7K-2017Master Bolt 4 5P-4684

D3 SEALED TRACKFORMER, STRAIGHT WALL BUSHING, SPLIT MASTER LINKS

6.125" (155.6 mm) PITCH – 9/16" BOLT


Components of Link AssemblyTrack LinksRH Pin End Master 1 6S-6889LH Pin End Master 1 6S-6890RH Bushing End Master 1 6S-6887LH Bushing End Master 1 6S-6888RH Regular 35 6S-8343LH Regular 35 6S-8344Other ComponentsPin 36 6B-5278Bushing 36 6S-3178Seal 144 6S-3146Track Hardware (9)

Bolt 140 4K-7038Nut 140 7K-2017Master Bolt 4 5P-4684

8 For 36 or 39 section link assemblies, upgrade by ordering 36 section 323-8758 or 39 section 323-8757 link assembly. This will require or-dering new shoes to be used with "6Y" track links.

9 Not part of link assembly; required to assemble track group.10 For 36 or 39 section link assemblies, upgrade by ordering 36 section 6Y-1711 or 39 section 6Y-1713 link assembly. This will require order-

ing new shoes to be used with "6Y" track links.

243

D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3D3 TRACK

FORMER, STRAIGHT WALL BUSHING, FULL LINK MASTER6.125" (155.6 mm) PITCH – 9/16" BOLT


Components of Link AssemblyTrack LinksRH Master (Full) 1 6S-8084LH Master (Full) 1 6S-8085RH Regular 35 6S-8343LH Regular 35 6S-8344Other ComponentsPin 35 6B-5278Master Pin 1 8L-5560Bushing 35 6S-3178Master Bushing 1 6S-3179Seal 144 6S-3146Spacer 2 6S-3145Track Hardware (12)

Bolt 144 4K-7038Nut 144 7K-2017

D3 TRACKEARLY (FORMER)

6.125" (155.6 mm) PITCH – 1/2" BOLT

QUANTITY PART NUMBERLink Assembly – 36 Section 2 6S-3142 (13)

Components of Link AssemblyTrack LinksRH Master (Full) 1 6S-3147LH Master (Full) 1 6S-3148RH Regular 35 6S-3143LH Regular 35 6S-3144Other ComponentsPin 35 6B-5278Master Pin 1 8L-5560Bushing 35 6S-3178Master Bushing 1 6S-3179Seal 144 6S-3146Spacer 2 6S-3145Track Hardware (12)

11 For 36 or 39 section link assemblies, upgrade by ordering 36 section 6Y-1711 or 39 section 6Y-1713 link assembly. This will require order-ing new shoes to be used with "6Y" track links.

12 Not part of link assembly; required to assemble track group.13 For 39 section link assembly, order 36 Section 6S-3142 and add 3 sections.

244

D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3D3 TRACKEARLY (FORMER)6.125" (155.6 mm) PITCH – 1/2" BOLT(Cont'd.)


Bolt 144 8H-7504Nut 144 117-8885

D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3 TRACK SHOESCURRENT MODEL, FOR USE WITH 6Y-0935/6Y-0936 TRACK LINKS

6.125" (155.6 mm) – 9/16" BOLT


MASTER SHOEPART NUMBER STD XL LGP

Extreme Service (Clip) (14) 16.0" (405 mm) 9N-4501 9N-4502 Y Y NModerate Service (14) 14.0" (355 mm) 6Y-1328 6Y-1329 Y Y NModerate Service (14) 16.0" (405 mm) 198-6987 198-6988 Y Y NModerate Service (Clip) (14) 16.0" (405 mm) 6Y-1381 6Y-1382 Y Y NModerate Service (14) 18.0" (460 mm) 198-6989 198-6990 N N YModerate Service (Clip) (14) 18.0" (460 mm) 6Y-5344 6Y-5345 N N YModerate Service (Clip) (14) 20.0" (510 mm) 6Y-1383 6Y-1384 N N YModerate Service (Clip) (14) 25.0" (635 mm) 6Y-1385 6Y-1386 N N YModerate Service (14) 25.0" (635 mm) 198-6991 198-6992 N N YModerate Service (15) 30.0" (760 mm) 196-4404 196-4405 N N YDouble Grouser (Clip) 14.0" (355 mm) 9N-4174 9N-4175 Y Y NDouble Grouser (Clip) 25.0" (635 mm) 6Y-1589 6Y-1590 N N YTriple Grouser 14.0" (355 mm) 6Y-1596 6Y-1597 Y Y NTriple Grouser (Rubber Bonded) 14.0" (355 mm) 9N-4328 9N-4327 Y Y NSelf Cleaning 25.0" (635 mm) 6S-9115 6S-9102 N N Y

D3C, D4C, D4B, D3B, D3 TRACK SHOESFORMER MODEL, FOR USE WITH 6S-8343/6S-8344 TRACK LINKS

6.125" (155.6 mm) – 9/16" BOLT



Moderate Service 12.0" (305 mm) 6S-8814 6S-7123 Y Y NModerate Service 14.0" (355 mm) 6S-8815 6S-9057 Y Y NModerate Service 16.0" (405 mm) 9W-4334 9W-4335 Y Y NModerate Service 25.0" (635 mm) 6S-8824 6S-9059 N N YDouble Grouser (Clip) 25.0" (635 mm) 6Y-1589 6Y-1590 N N YTriple Grouser 12.0" (305 mm) 6S-8823 6S-7124 Y Y N

13 For 39 section link assembly, order 36 Section 6S-3142 and add 3 sections.14 Increased overlap shoe profile; for use with 6Y track links only.15 Use with Modification Ar.

245

D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3D3C, D4C, D4B, D3B, D3 TRACK SHOESFORMER MODEL, FOR USE WITH 6S-8343/6S-8344 TRACK LINKS6.125" (155.6 mm) – 9/16" BOLT(Cont'd.)



Triple Grouser 14.0" (355 mm) 6Y-1596 6Y-1597 Y Y NSelf Cleaning (16) 25.0" (635 mm) 6S-9115 6S-9102 N N Y

D3K/G/C, D4K/G/C SystemOne TRACK SHOES6.91" (175.5 mm)PITCH - 16 mm BOLT

TYPE WIDTH PART NUMBERModerate Service 16.0" (405 mm) 235-2559Moderate Service 18.0" (460 mm) 243-2693Moderate Service (Clipped) 18.0" (460 mm) 246-5475Moderate Service 25.0" (635 mm) 235-2558 (17)

Moderate Service (Clipped) 25.0" (635 mm) 246-5474Self Cleaning 25.0" (635 mm) 238-8371

D3 TRACK SHOESEARLY – FORMER MODEL, FOR USE WITH 6S-3143/6S-3144 TRACK LINKS

6.125" (155.6 mm) – 1/2" BOLT

TYPE WIDTH REGULAR SHOE PART NUMBER STD LGPModerate Service 16.0" (405 mm) 6S-3422 Y N

D3K, D4K, SEGMENTSUSE WITH LARGE STEPPED BUSHING

(PER SIDE) QUANTITY PART NUMBERSprocket Segment (Tough Steel) (5 Tooth) 5 278-2356

Sprocket Segment (Tough Steel) (6 Tooth) 1 278-2355Bolt 31 9W-9265Nut 31 8H-5724Washer 31 5P-8246

D3K, D4K SystemOne SPROCKETUSE WITH CENTER TREAD IDLER

(PER SIDE) QUANTITY PART NUMBERSprocket (27 Tooth) 1 258-9787Bolt 31 9W-9265Nut 31 8H-5724Washer 31 5P-8246

16 Requires 2 5P-4683 Bolt Track (Per Side)17 Master Shoe 263-3798

246

D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3D3G, D4G, D3C, D4C, D4B, D3B, D3 SEGMENTS

(USE WITH LARGE STEPPED BUSHING)

(PER SIDE) QUANTITY PART NUMBERSprocket Segment (Tough Steel) (5 Tooth) 5 190-7396Adapter Ring (18) 1 6Y-5499Bolt 25 9W-9265Nut (18) 25 8H-5724Washer (18) 25 5P-8245

D3G, D4G SystemOne SPROCKETUSE WITH CENTER TREAD IDLERS AND SystemOne ROLLERS

(PER SIDE) QUANTITY PART NUMBERSprocket Segment (11 Tooth) 1 258-9792

Sprocket Segment (12 Tooth) 1 258-9793Bolt 25 9W-9265

D3G/C, D4G/C SystemOne SPROCKETSUSE WITH CONVENTIONAL IDLERS AND STANDARD ROLLERS


Sprocket Segment (11 Tooth) 1 221-0012Bolt 25 9W-9265Nut (18) 25 8H-5724Washer (18) 25 5P-8245

D3G, D4G, D3C, D4C, D4B, D3B, D3 SEGMENTSFOR USE IN JAPAN ONLY

(PER SIDE) QUANTITY PART NUMBERSprocket Segment (5 Tooth) 5 190-7396Adapter Ring 1 6Y-5499Bolt 25 9W-9265Nut (18) 25 8H-5724Washer (18) 25 5P-8245

D3C, D4C, D4B, D3B, D3 SPROCKETSFORMER MODEL

(PER SIDE) QUANTITY PART NUMBERSprocket Assembly (25 Tooth) 1 8Y-0622Rim (25 Tooth) 1 6Y-1244

18 Not required for Hystat machines (only bolts).

247

D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3D3K, D4K IDLERSCONVENTIONAL IDLER

(PER MACHINE) QUANTITY PART NUMBERIdler Group 2 254-0684Components of IdlerIdler Assembly and Bearing 2 106-9187Idler Assembly (19) 1 9N-4173Bearing (19) 2 6S-3495Other ComponentsShaft 1 254-0644Thrust Washer 2 6S-7715Bearing Block 2 254-0634Seal – Duo-Cone™ Group 2 6S-3285Toric Ring (19) 2 6S-3284Seal – Shaft O-Ring 2 1H-9696Plug 1 9F-2247Pin - Spring 2 027-3873

D4K, D3K SystemOne CENTER TREAD IDLERSCENTER TREAD IDLER


Components of IdlerIdler Assembly and Bearing 2 261-4473Other ComponentsShaft 1 254-0644Thrust Washer 2 6S-7715Bearing Block 2 254-0634Seal – Duo-Cone Group 2 6S-3285Toric Ring (19) 2 6S-3284Seal – Shaft O-Ring 2 1H-9696Plug 1 9F-2247Pin - Spring 2 027-3873

D3G, D4G, IDLERSCONVENTIONAL IDLER

(PER MACHINE) QUANTITY PART NUMBERIdler Group 2 – (20)

Components of GroupsIdler Assembly 1 106-9187

19 Component of preceding assembly or group; quantity shown is quantity per assembly or group.20 Order 184-6590 Idler Group.

248

D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3D3G, D4G, IDLERSCONVENTIONAL IDLER(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERIdler Group 2 – (20)

Idler Shell 1 9N-4173Bushing Assembly 2 6S-3495Bushing (21) 1 6Y-4744Shaft 1 6S-3697Thrust Washer 2 6S-7715Bearing Block (Out RH, In LH) 1 174-7002

Bearing Block (Out LH, In RH) 1 174-7001Seal – Duo-Cone Group 2 216-2957Toric Ring (21) 2 216-2956Seal – Shaft O-Ring 2 1H-9696Bolt 2 8C-6877Washer 2 7X-0618Lock 2 5M-5000Plug 1 9F-2247Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 5P-0373Toric Ring (21) 2 3N-3095

D3C, D4C, D4B, D3B, D3 IDLERSCURRENT MODEL


Components of GroupsIdler Assembly 1 106-9187Idler Shell 1 9N-4173Bushing Assembly 2 6S-3495Bushing (21) 1 6Y-4744Shaft 1 6S-3697Thrust Washer 2 6S-7715Bearing Block (Out RH, In LH) 1 6S-3451Bearing Block (Out LH, In RH) 1 6S-3453Seal – Duo-Cone Group 2 216-2957Toric Ring (21) 2 216-2956Seal – Shaft O-Ring 2 1H-9696Bolt 2 8C-6877

20 Order 184-6590 Idler Group.21 Component of preceding assembly or group; quantity shown is quantity per assembly or group.22 Order 164-1047 Idler Group.

249

D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3D3C, D4C, D4B, D3B, D3 IDLERSCURRENT MODEL(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERIdler Group 2 – (22)

Washer 2 7X-0618Lock 2 5M-5000Plug 1 9F-2247Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 5P-0373Toric Ring (23) 2 3N-3095

D3G/C, D4G/C SystemOne CENTER TREAD IDLERS(PER MACHINE) QUANTITY PART NUMBERIdler Group 2 249-7627Components of GroupsIdler Assembly & Brg 1 249-7627Shaft 1 6S-3697Thrust Washer 2 6S-7715Bearing Block 1 250-9513Bearing Block 1 250-9514Seal – Duo-Cone Group 2 6S-3285Toric Ring (23) 2 6S-3284Seal – Shaft O-Ring 2 1H-9696Bolt 2 8C-6877Washer 2 7X-0618Lock 2 5M-5000Plug 1 9F-2247

D3C, D4C, D4B, D3B, D3 IDLERSFORMER MODEL

(PER MACHINE) QUANTITY PART NUMBERIdler Assembly 2 8E-7342Other Components (Per Idler)Bearing (Sleeve) (24) 2 6Y-4744Shaft 1 8E-7343Thrust Washer 2 6Y-2110Bearing Block (Out RH, In LH) 1 8Y-1697Bearing Block (Out LH, In RH) 1 8Y-1698

22 Order 164-1047 Idler Group.23 Component of preceding assembly or group; quantity shown is quantity per assembly or group.24 Component of Idler Assembly

250

D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3D3C, D4C, D4B, D3B, D3 IDLERSFORMER MODEL(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERIdler Assembly 2 8E-7342Seal – Duo-Cone Group 2 9W-2142Toric Ring (25) 2 8H-2265Seal – Shaft O-Ring 2 1H-9696Bolt 2 8C-6877Washer 2 7X-0618Lock 2 5M-5000Stopper 1 7G-4332Plug 1 6Y-0473Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 8S-5656Toric Ring (25) 2 8S-5653AttachmentCounter Weight (Per Idler) 2 8Y-1817Bolt 3 7X-0349Washer 6 7X-0583Nut 3 7X-0448

D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3 CARRIER ROLLERS(PER MACHINE) QUANTITY PART NUMBERGroup 2 6S-3609Components of GroupRoller Shell 1 172-0160Shaft 1 6K-9861Cup 2 3N-6411Cone 2 3N-6412Ring 1 1M-7914Cover 1 4H-9527Collar Assembly 1 1M-7918Plate 1 6K-9860Bolt 2 6V-4791Bolt 5 0L-1351Washer 5 3B-4506Seal – Duo-Cone Group 1 9W-5224Toric Ring (26) 2 1M-3097Seal – Cover 1 4H-9628Seal – Shaft O-Ring 1 1H-9696

25 Component of preceding assembly or group; quantity shown is quantity per assembly or group.26 Component of preceding group; quantity shown is the quantity per group.

251

D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3 CARRIER ROLLERS (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERGroup 2 6S-3609Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 1 5K-6191Toric Ring (27) 1 2S-2181

D3K/G/C, D4K/G/C SystemOne CARRIER ROLLERS(PER MACHINE) QUANTITY PART NUMBERCarrier Roller Group 2 225-7650

D3K, D4K TRACK ROLLERSD4K 7 ROLLER FRAME D3K 6 ROLLER FRAME

(PER MACHINE) QUANTITY PART NUMBERDouble Flange (DF) (D4K) 6 301-0650

Single Flange (SF) (D4K) 8 301-0652

Double Flange (DF) (D3K) 4 301-0650

Single Flange (SF) (D3K) 8 301-0652Components of GroupRoller Shell (DF) 1 6S-7040Roller Shell (SF) 1 6S-7038Bushing Assembly 2 6S-3495Bearing (28) 1 6Y-4744Shaft 1 6S-3171Ring 2 6S-3172End Collar 2 3T-4283Thrust Washer 2 6S-7715Seal – Duo-Cone Group 2 216-2957Toric Ring (28) 2 216-2956Seal – Shaft O-Ring 2 7D-9749Plug 1 9F-2247Mounting Hardware (29)

Plate 2 345-9632Bolt (M16) 4 357-9606Washer 4 4D-3704Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 5P-0373Toric Ring (28) 2 3N-3095

27 Component of preceding group; quantity shown is the quantity per group.28 Component of preceding assembly or group; quantity shown is quantity per assembly or group.29 These components are not included in the roller group; quantities shown are required to mount each roller.

252

D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3D3K, D4K SystemOne TRACK ROLLERS

D4K 7 ROLLER FRAME D3K 6 ROLLER FRAME(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) - (30) 301-0654Mounting Hardware (31)

Bolt (16 mm) 4 8T-0088Washer 4 5P-8247

D3G, D4G SystemOne TRACK ROLLERSUSE WITH CENTER TREAD IDLERS ONLY AND SystemOne SPROCKET

(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) - (32) 243-3277Mounting Hardware (31)

Bolt (12 mm) 4 6V-8197Washer 4 2M-0849Plate (Between Collar and Frame) 2 203-4604

D3C, D4C, D4B, D3B, D3 TRACK ROLLERS5 ROLLER FRAME

(PER MACHINE) QUANTITY PART NUMBERDouble Flange (DF) 4 281-8338

Single Flange (SF) 6 281-8339Components of GroupRoller Shell (DF) 1 6S-7040Roller Shell (SF) 1 6S-7038Bushing Assembly 2 6S-3495Bearing (33) 1 6Y-4744Shaft 1 6S-3171Ring 2 6S-3172End Collar 2 3T-4283Thrust Washer 2 6S-7715Seal – Duo-Cone Group 2 216-2957Toric Ring (33) 2 216-2956Seal – Shaft O-Ring 2 7D-9749Plug 1 9F-2247Mounting Hardware (31)

Bolt (1/2") 4 0S-1585Washer 4 2M-0849Special Application Seals (Low/High Temperature)

30 12 required for D3K machines, and 14 required for D4K machines.31 These components are not included in the roller group; quantities shown are required to mount each roller.32 12 required for D3G machines, and 14 required for D4G machines.33 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

253

D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3D3C, D4C, D4B, D3B, D3 TRACK ROLLERS5 ROLLER FRAME(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERDouble Flange (DF) 4 281-8338

Single Flange (SF) 6 281-8339Seal – Duo-Cone Group 2 5P-0373Toric Ring (34) 2 3N-3095

D3G XL/LGP, D3C, D4C, D4B, D3B, D3 TRACK ROLLERS6 ROLLER FRAME



Bolt (M12) (D3G) 4 6V-8197Washer 4 2M-0849Bolt (1/2") (D3C) 4 0S-1585Washer 4 2M-0849Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 5P-0373Toric Ring (34) 2 3N-3095


254

D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3D4G XL/LGP, D4C XL TRACK ROLLERS

7 ROLLER FRAME(PER MACHINE) QUANTITY PART NUMBERDouble Flange (DF) 6 281-8338


Bolt (M12) (D4G) 4 6V-8197Washer 4 2M-0849Bolt (1/2") (D4C) 4 0S-1585Washer 4 2M-0849Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 5P-0373Toric Ring (36) 2 3N-3095

D4K, D3K SystemOne END GUIDING GUARDS (FRONT)WITH CENTER TREAD IDLER

(PER MACHINE) QUANTITY PART NUMBERPlate 2 310-7502Plate 2 310-7503Bolt (M10) 12 8T-0722Washer 12 8T-4121


255

D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3D3G/C, D4G/C SystemOne END GUIDING GUARDS (FRONT)

USE WITH CONVENTIONAL IDLERS(PER MACHINE) QUANTITY PART NUMBERWear Strip (38) 2 276-1711Wear Strip (38) 2 265-0946

D3G/C, D4G/C SystemOne END GUIDING GUARDS (FRONT)USE WITH CENTER TREAD IDLERS

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 265-0945Guard Assembly 2 265-0953Wear Strip (5 mm thick) (bottom) 8 265-0935Wear Strip (16 mm thick) (next to frame) (bottom) 4 265-0949

Bolt (12 mm) 16 8T-4176Washer 16 8T-4223Wear Strip (5 mm thick) (on top of frame) 4 265-0935

Bolt (12 mm) 8 8T-4139Washer 8 8T-4223

D4G, D3G END GUIDING GUARDS (FRONT)(PER MACHINE) QUANTITY PART NUMBERFrontGuard Assembly 2 8Y-6643Guard Assembly 2 8Y-6644

D4G, D3G END GUIDING GUARDS (FRONT)FOR MACHINE SERIAL NUMBER RSC

(PER MACHINE) QUANTITY PART NUMBERFrontGuard Assembly 2 152-7182Guard Assembly 2 152-7183

D3G TRACK GUIDING GUARDS (REAR SPROCKET)(FOR MACHINE SERIAL NUMBER RSC)

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly (RH Outer) 1 174-6992

Guard Assembly (LH Outer) 1 174-6993

Guard Assembly (RH Inner) 1 174-6994

Guard Assembly (LH Inner) 1 176-9728

38 These wear strips are to be welded to the existing guiding guards. Refer to Special Instruction "SystemOne Track Guiding Arrange-ments", Media No. REHS3174, for proper positioning and welding guidelines.

256

D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3D3G TRACK GUIDING GUARDS (REAR SPROCKET)(FOR MACHINE SERIAL NUMBER RSC)(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERBolt (16 mm) 16 8T-4173Washer 16 8T-4122Guard Assembly (RH Inner) 1 132-3831


Bolt (12 mm) 8 8T-4139Washer 8 5P-1076Guard Assembly (Top RH) 1 174-6983

Guard Assembly (Top LH) 1 174-6985

Bolt (10 mm) 8 8T-4136Washer 8 8T-4121Guard 2 132-3861Bolt (10 mm) 6 8T-4136Washer 6 8T-4121

D4K TRACK GUIDING GUARDS (REAR SPROCKET)(PER MACHINE) QUANTITY PART NUMBERGuard Assembly (Right Outer) 1 263-8355Guard Assembly (Left Outer) 1 284-7832

Guard Assembly (RH Inner) 1 263-8356Guard Assembly (LH Inner) 1 284-7833

Bolt (16 mm) 12 7X-2556Washer 12 8T-4122Guard Assembly (Right Upper) 1 263-8325

Guard Assembly (Left Upper) 1 263-8337


Guard Assembly (Top LH) 1 263-8364Bolt (M12) 10 8T-4139Washer 10 5P-1076

D3K TRACK GUIDING GUARDS (REAR SPROCKET)(PER MACHINE) QUANTITY PART NUMBERGuard Assembly (Right Outer) 1 263-2011Guard Assembly (Left Outer) 1 263-8332


Bolt (16 mm) 12 7X-2556

257

D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3D3K TRACK GUIDING GUARDS (REAR SPROCKET) (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERWasher 12 8T-4122Guard Assembly (Right Upper) 1 263-8325




Bolt (M12) 10 8T-4139Washer 10 5P-1076

D4K SystemOne TRACK GUIDING GUARDS (REAR SPROCKET)(PER MACHINE) QUANTITY PART NUMBERGuard Assembly (Right Outer) 1 287-4021

Guard Assembly (Left Outer) 1 287-4022




Guard Assembly (Left Upper) 1 263-8337Bolt (12 mm) 4 8T-4139Washer 4 5P-1076Guard Assembly (Top RH) 1 263-8363


Bolt (M12) 10 8T-4139Washer 10 5P-1076

D3K SystemOne TRACK GUIDING GUARDS (REAR SPROCKET)(PER MACHINE) QUANTITY PART NUMBERGuard Assembly (Right Outer) 1 283-6423





Guard Assembly (Left Upper) 1 263-8337Bolt (12 mm) 4 8T-4139Washer 4 5P-1076Guard Assembly (Top RH) 1 263-8363

258

D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3D3K SystemOne TRACK GUIDING GUARDS (REAR SPROCKET) (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERGuard Assembly (Top LH) 1 263-8364

Bolt (M12) 10 8T-4139Washer 10 5P-1076

D3G XL LGP TRACK GUIDING GUARDS (REAR SPROCKET)(PER MACHINE) QUANTITY PART NUMBERGuard Assembly (RH Outer) 1 174-6979




Bolt (16 mm) 16 7X-2556Washer 16 8T-4122Guard Assembly (RH Inner) 1 130-1437Guard Assembly (LH Inner) 1 130-1428



Bolt (10 mm) 6 8T-4136Washer 6 8T-4121Guard 2 128-9555Bolt (10 mm) 2 8T-4136Washer 2 8T-4121Bolt (10 mm) 4 8T-4186Washer 4 8T-4121Spacer 4 130-1433

D4G TRACK GUIDING GUARDS (REAR SPROCKET)(PER MACHINE) QUANTITY PART NUMBERGuard Assembly (RH Outer) 1 174-6979Guard Assembly (LH Outer) 1 174-6980


Bolt (16 mm) 16 7X-2556Washer 16 8T-4122Guard Assembly (RH Inner) 1 130-1437



259

D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3D4G TRACK GUIDING GUARDS (REAR SPROCKET) (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERGuard Assembly (Top LH) 1 174-6987

Bolt (10 mm) 8 8T-4136Washer 8 8T-4121Guard 2 128-9555Bolt (10 mm) 2 8T-4136Washer 2 8T-4121Bolt (10 mm) 4 8T-4186Washer 4 8T-4121Spacer 4 130-1433

D3C STD HYSTAT TRACK GUIDING GUARDS (REAR SPROCKET)4KS




Guard Assembly (LH Inner) 1 132-6615Bolt 16 7X-0351Washer 16 8T-4122Guard Assembly (RH Inner) 1 130-1437

Guard Assembly (LH Inner) 1 130-1428Bolt 8 5C-6565Washer 8 5P-1076Guard Assembly (Top RH) 1 128-9473

Guard Assembly (Top LH) 1 128-9474Bolt 6 5S-7379Washer 6 5P-1075Guard 2 128-9555Bolt 2 4L-6454Washer 2 5P-1075Bolt 4 7X-0288Washer 4 5P-1075Spacer 4 130-1433

D3G, D3C, XL/LGP SystemOne TRACK GUIDING GUARDS (REAR SPROCKET)(PER MACHINE) QUANTITY PART NUMBERGuard Assembly (RH Outer) 1 267-6132




Bolt (16 mm) (Guard Assembly to Frame) 16 7X-2556

260

D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3D3G, D3C, XL/LGP SystemOne TRACK GUIDING GUARDS (REAR SPROCKET) (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERWasher 16 8T-4122Guard Assembly (RH Inner) 1 130-1437


Bolt (12 mm) 8 8T-4139Washer 8 5P-1076Guard 2 128-9555Spacer 4 130-1433Bolt (10 mm) 4 8T-4186Bolt (10 mm) 2 8T-4136Washer 6 8T-4121Guard Assembly (RH) 1 263-3227

Guard Assembly (LH) 1 263-3230

Bolt (10 mm) 6 8T-4136Washer 6 8T-4121

D4G, D4C, XL/LGP SystemOne TRACK GUIDING GUARDS (REAR SPROCKET)(PER MACHINE) QUANTITY PART NUMBERGuard Assembly (RH Outer) 1 267-6132




Bolt (16 mm) (Guard Assembly to Frame) 16 7X-2556Washer 16 8T-4122Guard Assembly (RH Inner) 1 130-1437


Bolt (12 mm) 8 8T-4139Washer 8 5P-1076Guard 2 128-9555Spacer 4 130-1433Bolt (10 mm) 4 8T-4186Bolt (10 mm) 2 8T-4136Washer 6 8T-4121Guard Assembly (RH) 1 263-3232

Guard Assembly (LH) 1 263-3234

Bolt (10 mm) 8 8T-4136Washer 8 8T-4121

261

D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3D3C LGP HYSTAT, D3C XL HYSTAT, D4C STD HYSTAT, D4C LGP HYSTAT, D4C XL HYSTAT

TRACK GUIDING GUARDS (REAR SPROCKET)4LS, 4TS, 5GS, 6BS, 8CS


Guard Assembly (LH Outer) 1 128-9546Guard Assembly (RH Inner) 1 132-6622


Guard Assembly (LH Inner) 1 130-1428Bolt 8 5C-6565Washer 8 5P-1076Guard Assembly (Top RH) 1 133-9599Guard Assembly (Top LH) 1 133-9600Bolt 8 5S-7379Washer 8 5P-1075Guard 2 128-9555Bolt 2 4L-6454Washer 2 5P-1075Bolt 4 7X-0288Washer 4 5P-1075Spacer 4 130-1433

D3C STD SERIES III TRACK GUIDING GUARDS (REAR SPROCKET)6SL2556-UP

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly (Right Outer, Left Inner) 2 132-6615Guard Assembly (Left Outer, Right Inner) 2 132-6622Bolt (5/8") 16 7X-0351Washer 16 8T-4122Guard Assembly (Right Outer, Left Inner) 2 131-1569Guard Assembly (Left Outer, Right Inner) 2 131-1568Bolt (1/2") 16 5C-6565Washer 16 5P-1076Guard Assembly (Top RH) 1 131-1911

Guard Assembly (Top LH) 1 131-2466Bolt (3/8") 6 5S-7379Washer 6 5P-1075

262

D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3D3C LGP SERIES III, D3C XL SERIES III, D4C STD SERIES III, D4C LGP SERIES III, D4C XL

SERIES III TRACK GUIDING GUARDS (REAR SPROCKET)1FW, 6YL1990-UP, 7SL674-UP, 7XL1108-UP, 8EL140-UP, 9TS

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly (Right Outer, Left Inner) 2 132-6615Guard Assembly (Left Outer, Right Inner) 2 132-6622Bolt (5/8") 16 7X-0351Washer 16 8T-4122Guard Assembly (Right Outer, Left Inner) 2 131-1569Guard Assembly (Left Outer, Right Inner) 2 131-1568Bolt (1/2") 16 5C-6565Washer 16 5P-1076Guard AssemblyTop RH 1 148-5072Top LH 1 148-5073Bolt (3/8") 8 5S-7379Washer 8 5P-1075

D4K TRACK ROLLER GUARDS FULL LENGTHUSE WITH TRACK GUIDING GUARDS REAR SPROCKET

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 286-1845Guard Assembly 2 286-1846Bolt (12 mm) 24 8T-4183Spacer 24 145-5181Bolt (12 mm) (Guard to Front Guide) 8 8T-4139Washer 8 5P-1076Bolt (M12) (Guard to Rear Guard) 4 8T-4194Bolt (M12) (Guard to Rear Guard) 4 8T-4176Washer 8 7X-0550

D3K TRACK ROLLER GUARDS FULL LENGTHUSE WITH TRACK GUIDING GUARDS REAR SPROCKET


263

D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3D4K SystemOne TRACK ROLLER GUARDS FULL LENGTH

USE WITH TRACK GUIDING GUARDS REAR SPROCKET(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 286-1850Guard Assembly 2 286-1840Bolt (12 mm) 24 8T-4183Spacer 24 145-5181Bolt (12 mm) (Guard to Front Guide) 8 8T-4139Washer 8 5P-1076Bolt (M12) (Guard to Rear Guard) 4 8T-4194Bolt (M12) (Guard to Rear Guard) 4 8T-4176Washer 8 7X-0550

D3K SystemOne TRACK ROLLER GUARDS FULL LENGTHUSE WITH TRACK GUIDING GUARDS REAR SPROCKET


D3C STD HYSTAT, D3C STD SERIES III TRACK ROLLER GUARDS (FULL LENGTH)5 ROLLER, USE WITH TRACK GUIDING GUARDS (REAR SPROCKET)

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 138-9692Guard Assembly 2 138-9693Bolt (1/2") 16 8T-8917Washer 16 8T-4223Pipe 8 8Y-1009Bolt (1/2") 8 6M-9613Nut 8 6V-8188Washer 16 8T-4223Tab (Front) 4 8Y-3413Bolt (3/8") 4 4L-6454Washer 4 8T-4896Plate (Rear) 4 138-1946Plate (Rear Threaded Holes) 4 138-1945

264

D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3D3C STD HYSTAT, D3C STD SERIES III TRACK ROLLER GUARDS (FULL LENGTH)5 ROLLER, USE WITH TRACK GUIDING GUARDS (REAR SPROCKET)(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERBolt (1/2") 8 8T-8919Washer 8 8T-4223

D3C XL, D3C LGP SERIES III, D3C LGP HYSTAT, D3C STD HYSTAT, D4C STD, D4C LGPSERIES III, D4C STD HYSTAT, D4C LGP HYSTAT TRACK ROLLER GUARDS (FULL LENGTH)

6 ROLLER, USE WITH TRACK GUIDING GUARDS (REAR SPROCKET)

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 138-1937Guard Assembly 2 138-1936Bolt (1/2") 16 8T-8917Washer 16 8T-4223Pipe 8 8Y-1009Bolt (1/2") 8 6M-9613Nut 8 6V-8188Washer 16 8T-4223Tab (Front) 4 8Y-3413Bolt (3/8") 4 4L-6454Washer 4 8T-4896Plate (Rear) 4 138-1946Plate (Rear Threaded Holes) 4 138-1945Bolt (1/2") 8 8T-8919Washer 8 8T-4223

D4C XL SERIES III, D4C HYSTAT TRACK ROLLER GUARDS (FULL LENGTH)7 ROLLER, USE WITH TRACK GUIDING GUARDS (REAR SPROCKET)

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 138-9694 (39)

Guard Assembly 2 138-9695 (39)

Bolt (1/2") 20 8T-8917Washer 20 8T-4223Pipe 10 8Y-1009Bolt (1/2") 10 6M-9613Nut 10 6V-8188Washer 20 8T-4223Tab (Front) 4 8Y-3413Bolt (3/8") 4 4L-6454Washer 4 8T-4896Plate (Rear) 4 138-1946

39 Discontinued.

265

D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3D4C XL SERIES III, D4C HYSTAT TRACK ROLLER GUARDS (FULL LENGTH)7 ROLLER, USE WITH TRACK GUIDING GUARDS (REAR SPROCKET)(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERPlate (Rear Threaded Holes) 4 138-1945Bolt (1/2") 8 8T-8919Washer 8 8T-4223

D3G TRACK ROLLER GUARDS (FULL LENGTH)6 ROLLER, USE WITH TRACK GUIDING GUARDS (REAR SPROCKET)

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 180-7319Guard Assembly 2 180-7320Bolt (12 mm) 16 8T-4956Washer 16 8T-4223Pipe 8 8Y-1009Bolt (12 mm) 8 7X-3335Washer 16 8T-4223Nut 8 8T-4244Tab (Front) 4 8Y-3413Bolt (10 mm) 4 8T-4136Washer 4 8T-4121Plate (Rear) 4 138-1946Plate (Rear Threaded Holes) 4 180-7321Bolt (12 mm) 8 8T-4184Washer 8 8T-4223

D4G TRACK ROLLER GUARDS (FULL LENGTH)7 ROLLER, USE WITH TRACK GUIDING GUARDS (REAR SPROCKET)

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 198-6093Guard Assembly 2 198-6094Bolt (12 mm) 20 8T-4956Washer 20 8T-4223Pipe 10 8Y-1009Bolt (12 mm) 10 7X-3335Washer 20 8T-4223Nut 10 8T-4244Tab (Front) 4 8Y-3413Bolt (10 mm) 4 8T-4136Washer 4 8T-4121Plate (Rear) 4 138-1946Plate (Rear Threaded Holes) 4 180-7321

266

D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3D4G TRACK ROLLER GUARDS (FULL LENGTH)7 ROLLER, USE WITH TRACK GUIDING GUARDS (REAR SPROCKET)(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERBolt (12 mm) 8 8T-4184Washer 8 8T-4223

D3G XL/LGP SystemOne TRACK ROLLER GUARDS (FULL LENGTH)USE WITH CENTER TREAD IDLERS

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 250-9471Guard Assembly 2 250-9472Bolt (12 mm) (Guard Assembly to Frame) 16 8T-4956Washer (Guard Assembly to Frame) 16 8T-4223Tube 8 8Y-1009Bolt (12 mm) 8 7X-3335Washer 16 8T-4223Nut 8 8T-4244Plate (Front) 4 276-1717Plate (2 mm Thick) (Front) 4 276-1716Bolt (10 mm) (Plate to Guard As.) 12 8T-4196Washer 12 8T-4121Plate (Rear) 4 180-7321Plate (Rear) 4 276-1718Bolt (102 mm) (Plate to Guard Assembly) 8 8T-4183Washer 4 8T-4123

D4G XL/LGP SystemOne TRACK ROLLER GUARDS (FULL LENGTH)USE WITH CENTER TREAD IDLERS

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 252-5387Guard Assembly 2 252-5388Bolt (12 mm) (Guard Assembly to Frame) 20 8T-4956Washer (Guard Assembly to Frame) 20 8T-4223Tube 10 8Y-1009Bolt (12 mm) 10 7X-3335Washer 20 8T-4223Nut 8 8T-4244Plate (Front) 4 276-1717Plate (2 mm Thick) (Front) 4 276-1716Bolt (10 mm) (Plate to Guard As.) 12 8T-4196Washer 12 8T-4121Plate (Rear) 4 180-7321

267

D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3D4G XL/LGP SystemOne TRACK ROLLER GUARDS (FULL LENGTH)USE WITH CENTER TREAD IDLERS(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERPlate (Rear) 4 276-1718Bolt (102 mm) (Plate to Guard Assembly) 8 8T-4183Washer 4 8T-4123

D3C TRACK ROLLER GUARDS (FULL LENGTH)5 ROLLER FRAME

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 8Y-3439Guard Assembly 2 8Y-3440Pipe 10 8Y-1009Bolt 20 8T-8917Bolt 10 7X-0471Bolt 8 4L-6454Washer 30 8T-4223Washer 8 8T-4896Tab 8 8Y-3413Nut 10 6V-8188

D3C, D4C TRACK ROLLER GUARDS (FULL LENGTH)6 ROLLER FRAME

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 8Y-3437Guard Assembly 2 8Y-3438Pipe 10 8Y-1009Bolt 20 8T-8917Bolt 10 7X-0471Bolt 8 4L-6454Washer 30 8T-4223Washer 8 8T-4896Tab 8 8Y-3413Nut 10 6V-8188

D4B, D3B, D3 TRACK ROLLER GUARDS (FULL LENGTH)79U4110-UP, 23Y, 27Y, 3YC

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 6S-9627Guard Assembly 2 6S-9628Pipe 12 6S-3429Bolt 40 0S-1595Bolt 12 2D-0516

268

D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3D4B, D3B, D3 TRACK ROLLER GUARDS (FULL LENGTH)79U4110-UP, 23Y, 27Y, 3YC(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERWasher 52 5P-8245Nut 14 1F-7958

D4B, D3B, D3 TRACK ROLLER GUARDS (FULL LENGTH)23Y, 24Y, 27Y, 28Y, 5MC, 3YC, 2XF, 1SG

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 5G-5965Guard Assembly 2 5G-5966Pipe 14 6S-3429Bolt 44 0S-1595Bolt 14 2D-0516Washer 38 5P-8245Nut 14 1F-7958

D3K CENTER GUIDING GUARDS(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 282-3669Bolt (M12) 8 8T-4194Washer 8 198-4778

D3K SystemOne CENTER GUIDING GUARDS(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 276-1753Bolt (M12) 8 8T-4194Washer 8 198-4778



269

D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3D3G/C, D4G/C SystemOne CENTER GUIDING GUARDS

USE WITH CONVENTIONAL IDLERSROLLER POSITION #3 FOR D3G/C, #4 FOR D4G/C

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 278-1011Bolt (12 mm) 8 8T-4194Washer 8 198-4778

D3G XL/LGP SystemOne CENTER GUIDING GUARDS(USE WITH CENTER TREAD IDLERS)

ROLLER POSITION #3(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 276-1757Bolt (12 mm) 8 8T-4194Washer 8 198-4778

D4G XL/LGP SystemOne CENTER GUIDING GUARDS(USE WITH CENTER TREAD IDLERS)

ROLLER POSITION #4(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 276-1766Bolt (12 mm) 8 8T-4194Washer 8 198-4778

D3C, D3B SPROCKET/IDLER TRACK FRAME GUARDS*STD

(PER MACHINE) QUANTITY PART NUMBERRoller Frame Guard (RH) 1 – (40)

Roller Frame Guard (LH) 1 – (41)

Idler Guard 2 8Y-8964Sprocket Guard (RH) 1 8Y-8967Sprocket Guard (LH) 1 8Y-8968Wiper Guard (RH) 1 8Y-8977Wiper Guard (LH) 1 8Y-8978Bracket 2 6S-6741Bolt 34 5S-7379Bolt 6 8T-8917Washer 34 5P-1075Washer 6 8T-4223* This guarding package has shown a marked improvement in undercarriage wear life when used in loose abrasive soils. The purpose of the guarding is to shedmaterial and prevent its entry into the undercarriage system (link box area).

40 Guard (RH) 103-8835 serviced by (1) 139-5740 Guard Assembly and (1) 8Y-6640 Tab Assembly.41 Guard (LH) 103-8838 serviced by (1) 139-5739 Guard Assembly and (1) 8Y-6640 Tab Assembly.

270

D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3D3C XL, D4C STD, D4B STD SPROCKET/IDLER TRACK FRAME GUARDS*



Idler Guard 2 102-9920Sprocket Guard (RH) 1 8Y-8967Sprocket Guard (LH) 1 8Y-8968Wiper Guard (RH) 1 8Y-8977Wiper Guard (LH) 1 8Y-8978Bracket 2 6S-6741Bolt 34 5S-7379Bolt 6 8T-8917Washer 34 5P-1075Washer 6 8T-4223* This guarding package has shown a marked improvement in undercarriage wear life when used in loose abrasive soils. The purpose of the guarding is to shedmaterial and prevent its entry into the undercarriage system (link box area).

D3C, D4C, D4B SPROCKET/IDLER TRACK FRAME GUARDS*LGP



dler Guard 2 102-9920Sprocket Guard (RH) 1 8Y-8967Sprocket Guard (LH) 1 8Y-8968Wiper Guard (RH) 1 8Y-8977Wiper Guard (LH) 1 8Y-8978Bracket 2 6S-6741Bolt 34 5S-7379Bolt 6 8T-8917Washer 34 5P-1075Washer 6 8T-4223* This guarding package has shown a marked improvement in undercarriage wear life when used in loose abrasive soils. The purpose of the guarding is to shedmaterial and prevent its entry into the undercarriage system (link box area).

D4K, D3K IDLER GUARDSCONVENTIONAL IDLER

(PER MACHINE) QUANTITY PART NUMBERBracket Assembly (To Frame) 2 305-1443Bracket Assembly (To Frame) 2 305-1446

42 Guard (RH) 103-8835 serviced by (1) 139-5740 Guard Assembly and (1) 8Y-6640 Tab Assembly.43 Guard (LH) 103-8838 serviced by (1) 139-5739 Guard Assembly and (1) 8Y-6640 Tab assembly.44 Guard (RH) 103-8836 serviced by (1) 139-5742 Guard Assembly and (1) 8Y6660 Tab Assembly.45 Guard (LH) 103-8837 serviced by (1) 139-5741 Guard Assembly and (1) 8Y6660 Tab Assembly.

271

D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3D4K, D3K IDLER GUARDSCONVENTIONAL IDLER(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERBolt (M12) (Bracket Assembly to Frame) 8 8T-4192Washer 8 7X-0584Guard 2 305-1448Plate 4 305-1450Plate 2 305-1449Bolt (M12) (Plate and Guard to Bracket Assembly) 8 8T-4956Washer 8 8T-4223Plate 2 290-3391Bolt (M10) 4 8T-4195Washer 8 7X-7729Nut (M10) 4 8T-4133Bracket Assembly (Front) 2 305-1439Bracket Assembly (Front) 2 305-1442Bolt (M12) (Bracket Assembly to Bracket Assembly) 4 8T-4139Bolt (M12) 8 8T-4184Washer 12 8T-4223

D4K, D3K SystemOne IDLER GUARDSCENTER TREAD IDLER

(PER MACHINE) QUANTITY PART NUMBERBracket Assembly (To Frame) 2 305-1443Bracket Assembly (To Frame) 2 305-1446Bolt (M12) (Bracket Assembly to Frame) 8 8T-4192Washer 8 7X-0584Guard 2 305-1454Plate 4 305-1455Bolt (M12) (Plate and Guard to Bracket Assembly) 8 8T-4956Washer 8 8T-4223Plate 2 290-3391Bolt (M10) 4 8T-4195Washer 8 7X-7729Nut (M10) 4 8T-4133Bracket Assembly (Front) 2 305-1451Bracket Assembly (Front) 2 305-1453Bolt (M12) (Bracket Assembly to Bracket Assembly) 4 8T-4139Bolt (M12) 8 8T-4184Washer 12 8T-4223

272

D3K, D4K, D3G, D4G, D3C, D4C, D4B, D3B, D3D3G, D4G, D3C, D4C IDLER ROCK GUARDS (WITHOUT COUNTER WEIGHT)

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly (RH) 2 102-5920Guard Assembly (LH) 2 102-5921

D3G, D4G, D3C, D4C IDLER ROCK GUARDS (WITH COUNTER WEIGHT)(PER MACHINE) QUANTITY PART NUMBERGuard Assembly (RH) 2 108-1578Guard Assembly (LH) 2 108-1579

273

D5K, D5G, D5CD5K XL/LGP SEALED AND LUBRICATED TRACK

INCREASED STEPPED BUSHINGWWW, YYY, JLF

6.75" (171.5 mm) PITCH 5/8" BOLTQUANTITY PART NUMBER

Link Assembly – 40 Section 2 289-0270Components of Link AssemblyTrack LinksRH Pin End Master 1 6Y-9263LH Pin End Master 1 6Y-9264RH Bushing End Master 1 9G-8585LH Bushing End Master 1 9G-8586RH Regular 39 6Y-9261LH Regular 39 6Y-9262Other ComponentsPin 40 160-7816 (1)

Bushing 40 224-3959 (2)

Seal Assembly (Rigid) 80 250-4000Thrust Ring 40 6Y-6486Stopper 40 5G-2247Plug 40 6Y-0473Track Hardware (3)

Bolt 156 9G-3110Nut 156 1M-1408Master Bolt 2 3T-8601Master Bolt 2 9G-8592Special Sets/GroupsSeal Set (88 Seal Assemblies) 1 252-7860Bushing and Seal Group (39 Sections) 1 227-9954 (4)

D5K XL/LGP SystemOne TRACKPRESS FIT MASTERWWW, YYY, JLF

7.50" (190.5 mm) PITCH - 18 mm BOLTQUANTITY PART NUMBER

Link Assembly - 36 Section 2 235-2535Components of Link AssemblyLink Box Standard (5) 18 424-3546Standard Link 34 235-2529Standard Link (Press Fit) (3) 2 235-2529 (6)

1 Former pin 6Y-9260 (Use 9G-1642 stopper).2 9G-8588 track bushing still available when servicing 6I-9527 & 6Y-5407 link assemblies.3 Not part of link assembly; required to assemble track group.4 Contains 224-3959 bushings.5 Link Box Standard that is greater than 40% worn should be replaced with part number 264-9766.6 Clamp Master links 2 - 318-2486 and 4 - 254-0227 Master Bolts

274

D5K, D5G, D5CD5K XL/LGP SystemOne TRACKPRESS FIT MASTERWWW, YYY, JLF7.50" (190.5 mm) PITCH - 18 mm BOLT(Cont'd.)

QUANTITY PART NUMBERLink Assembly - 36 Section 2 235-2535Track Hardware (7)

Bolt (M18) 144 238-0472Nut 144 238-0473

D5G XL/LGP,D5C STD/XL/LGP, SEALED AND LUBRICATED TRACKINCREASED STEPPED BUSHING

37 SECTION:D5C STD/LGP: 6PJ372-UP, 3MK243-UP, 9DL1-UP, 6ZL1-UP, 6CS1-UP39 SECTION :D5G XL/LGP, D5C XL: 7PS, 8ZS, FDH, CLF, FDW, CLW, WGB

6.75" (171.5 mm) PITCH – 5/8" BOLTPART NUMBER 37 SECTION 39 SECTION

Link Assembly (Quantity 2) 227-9960 (8) 227-9976 (9)

Components of Link Assembly (Current D4H)Track LinksRH Pin End Master 6Y-9263 1 1LH Pin End Master 6Y-9264 1 1RH Bushing End Master 9G-8585 1 1LH Bushing End Master 9G-8586 1 1RH Regular 6Y-9261 36 38LH Regular 6Y-9262 36 38Other ComponentsPin 160-7816 (10) 37 39Bushing 224-3959 (11) 37 39Seal Assembly (Rigid) 250-4000 74 78Thrust Ring 6Y-6486 74 78Stopper 5G-2247 37 39Plug 6Y-0473 37 39Track Hardware (7)

Bolt 9G-3110 144 152Nut 1M-1408 144 152Master Bolt 3T-8601 2 2Master Bolt 9G-8592 2 2Special Sets/Groups

7 Not part of link assembly; required to assemble track group.8 6I-9527 link assembly with 9G-8588 bushing still available in Japan.9 6Y-5407 link assembly with 9G-8588 bushing still available in Japan.10 Former pin 6Y-9260 (Use 9G-1642 stopper).11 9G-8588 track bushing still available when servicing 6I-9527 & 6Y-5407 link assemblies.

275

D5K, D5G, D5CD5G XL/LGP,D5C STD/XL/LGP, SEALED AND LUBRICATED TRACKINCREASED STEPPED BUSHING37 SECTION:D5C STD/LGP: 6PJ372-UP, 3MK243-UP, 9DL1-UP, 6ZL1-UP, 6CS1-UP39 SECTION :D5G XL/LGP, D5C XL: 7PS, 8ZS, FDH, CLF, FDW, CLW, WGB6.75" (171.5 mm) PITCH – 5/8" BOLT(Cont'd.)

PART NUMBER 37 SECTION 39 SECTIONLink Assembly (Quantity 2) 227-9960 (8) 227-9976 (9)

Components of Link Assembly (Current D4H)Seal Set (88 Seal Assemblies) 252-7860 1 1Bushing and Seal Group (39 Sections) 227-9954 (12) 1 1

D5G, D5C XL/LGP SystemOne TrackPRESS FIT MASTER

SystemOne ONLY FOR D5C WITH THE FOLLOWING SERIAL NUMBERS 4WS, 7PS, 8ZS6.75" (171.5 mm) PITCH - 16 mm BOLT

QUANTITY PART NUMBERLink Assembly - 39 Section 2 312-2274Components of Link AssemblyLink Box Standard 18 312-2269 (13)

Link Box Offset 1 312-2271 (14)

Standard Link 36 235-2514Standard Link (Press Fit) (15) 2 235-2514 (16)

Track Hardware (15)

Bolt (M16) 156 218-3274Nut 156 5I-6125

D5G XL/LGP, D5C STD/XL/LGP, ROTATING BUSHING TRACK*6.75" (171.5 mm) PITCH – 5/8" BOLT


Components of Link AssemblyTrack LinksRH Pin End Master 108-0949 1 1LH Pin End Master 108-0950 1 1RH Bushing End Master (18) 109-0488 1 1LH Bushing End Master (18) 109-0489 1 1RH Regular (18) 109-0486 36 38

8 6I-9527 link assembly with 9G-8588 bushing still available in Japan.9 6Y-5407 link assembly with 9G-8588 bushing still available in Japan.12 Contains 224-3959 bushings.13 Link Box Standard that is greater than 40% worn should be replaced with part number 264-9765.14 Link Box Offset that is greater than 40% worn should be replaced with part number 264-9770.15 Not part of link assembly; required to assemble track group.16 Clamp Master links 2 - 235-2620 and 4 - 254-0227 Master Bolts17 Refer to IRM PELJ1141 for conversion options.18 Contains link and insert. Insert is not serviced.

276

D5K, D5G, D5CD5G XL/LGP, D5C STD/XL/LGP, ROTATING BUSHING TRACK*6.75" (171.5 mm) PITCH – 5/8" BOLT(Cont'd.)


Components of Link AssemblyLH Regular (19) 109-0487 36 38Other ComponentsPin 152-8075 37 39Bushing 165-1767 37 39Seal Assembly (Rigid) 250-3992 148 156Thrust Ring 152-8069 148 156Stopper 5G-2247 37 39Plug 6Y-0473 37 39Track Hardware (20)

Bolt 9G-3110 144 152Nut 1M-1408 144 152Master Bolt 9G-8592 2 2Master Bolt 3T-8601 2 2* Rotating Bushing Track is an application specific undercarriage, designed for high abrasion/low impact applications (4000 hour system life or less). When in-stalling Rotating Bushing Track on existing machines, refer to IRM UC98-19 for adaptability, installation, and guarding information.

D5C STD, D5C LGP SEALED AND LUBRICATED TRACKFORMER MODEL WITH 9K LINKS

6PJ1-371, 3MK1-2426.75" (171.5 mm) PITCH – 5/8" BOLT


Components of Link Assembly (Former D4E)Track LinksRH Pin End Master 1 1V-4603LH Pin End Master 1 1V-4604RH Bushing End Master 1 1V-4605LH Bushing End Master 1 1V-4606RH Regular 36 9K-6629LH Regular 36 9K-6628Other ComponentsPin 37 154-3664 (22)

Bushing 37 7T-4628Seal Assembly (Rigid) 74 250-4004

17 Refer to IRM PELJ1141 for conversion options.19 Contains link and insert. Insert is not serviced.20 Not part of the link assembly; required to assemble track group.21 Upgrade to 227-9960 Link Assembly.22 Former pin 9K-8550 (Use 9G-1642 stopper).

277

D5K, D5G, D5CD5C STD, D5C LGP SEALED AND LUBRICATED TRACKFORMER MODELWITH 9K LINKS6PJ1-371, 3MK1-2426.75" (171.5 mm) PITCH – 5/8" BOLT(Cont'd.)


Components of Link Assembly (Former D4E)Thrust Ring 74 1V-3361Stopper 37 5G-2247Plug 37 6Y-0473Track Hardware (23)

Bolt 144 7H-3597Nut 144 1M-1408Master Bolt 4 3P-2274Special Sets/GroupsBushing and Seal Group (40 Sections) 1 154-3654Seal Set (80 Seal Assemblies) 1 252-7862

D5K, D5G, D5C TRACK SHOESCURRENT MODELWITH 6Y LINKS & RBT LINK ASSEMBLY

TYPE WIDTHPART

NUMBER STD XL LGPExtreme Service 18.0" (460 mm) 6Y-5624 Y Y NExtreme Service 20.0" (510 mm) 8E-9816 Y Y YModerate Service 18.0" (460 mm) 3T-0360 Y Y NModerate Service 20.0" (510 mm) 8E-9812 Y Y YModerate Service 26.0" (660 mm) 6I-9573 N N YModerate Service (Use on Wide Gauge Machine Only) 30.0" (760 mm) 216-6286 N N YDouble Grouser 16.0" (405 mm) 102-3585 Y Y NDouble Grouser 18.0" (460 mm) 102-3587 Y Y Y

D5K SystemOne TRACK SHOES7.50" (190.5 mm) PITCH - 18 mm BOLT


Moderate Service 20.0" (510 mm) 235-2554 235-2554Moderate Service (24) 26.0" (660 mm) 235-2555 260-6762Moderate Service (24) 30.0" (760 mm) 235-2534 255-4182Extreme Service 20.0" (510 mm) 277-2238 277-2238Extreme Service (24) 26.0" (660 mm) 327-5831 –

21 Upgrade to 227-9960 Link Assembly.23 Not part of link assembly; required to assemble track group.24 Use on LGP machines only.

278

D5K, D5G, D5CD5G, D5C SystemOne TRACK SHOES

6.75" (171.5 mm) PITCH - 16 mm BOLT



Moderate Service 18.0" (460 mm) 260-6769 255-1536Moderate Service 20.0" (510 mm) 260-6768 257-2336Moderate Service (25) 26.0" (660 mm) 260-6770 256-4942Extreme Service 18.0" (460 mm) 260-6773 255-1537Extreme Service 20.0" (510 mm) 260-6772 256-4944

D5C TRACK SHOESFORMER MODEL WITH 9K LINKS

TYPE WIDTHREGULAR SHOE PART

NUMBERMASTER SHOEPART NUMBER STD XL LGP

Extreme Service 20.0" (510 mm) 2V-3819 5V-2906 Y Y YModerate Service 18.0" (460 mm) 206-3510 206-3518 Y Y NModerate Service 20.0" (510 mm) 206-3511 206-3519 Y Y YDouble Grouser 18.0" (460 mm) 8E-4799 8E-4800 Y Y Y

D5K SPROCKETS(SALT)

(PER SIDE) QUANTITY PART NUMBERSprocket Segment (Tough Steel) (4 Tooth) 3 278-2359Sprocket Segment (Tough Steel) (5 Tooth) 3 278-2358Bolt 27 6V-0937Nut 27 7H-3607Washer 27 6V-4316

D5K SystemOne SPROCKETS(PER SIDE) QUANTITY PART NUMBERSprocket (25 Tooth) 1 258-9788Bolt 27 6V-0937Nut 27 7H-3607Washer 27 6V-4316

D5G, D5C SPROCKETSSealed and Lubricated, Rotating Bushing, and SystemOne Track

(PER SIDE) QUANTITY PART NUMBERSprocket Segment (Tough Steel) (4 Tooth) 2 197-9677Sprocket Segment (Tough Steel) (5 Tooth) 3 197-9678Bolt 23 6V-0937

25 Use on LGP machines only.

279

D5K, D5G, D5CD5G, D5C SPROCKETSSealed and Lubricated, Rotating Bushing, and SystemOne Track(Cont'd.)(PER SIDE) QUANTITY PART NUMBERNut (26) 23 7H-3607Washer (26) 23 2S-5658

D5K IDLERSCONVENTIONAL IDLER

(PER MACHINE) QUANTITY PART NUMBERIdler Group 2 285-3476Idler Assembly and Bearing 2 262-2093Bearing (27) 2 243-5321Other ComponentsShaft 1 254-0645Bearing Block 2 254-0635Seal – Duo-Cone Group 2 109-0885Toric Ring (27) 2 6Y-2270Seal – Shaft O-Ring 2 7F-8267Plug 1 9F-2247Pin - Spring 2 027-3873

D5K SystemOne CENTER TREAD IDLER(PER MACHINE) QUANTITY PART NUMBERIdler Group 2 254-0615Idler Assembly and Bearing 2 261-4472Bearing (27) 2 243-5321Other ComponentsShaft 1 254-0645Bearing Block 2 254-0635Seal – Duo-Cone Group 2 109-0885Toric Ring (27) 2 6Y-2270Seal – Shaft O-Ring 2 7F-8267Plug 1 9F-2247Pin - Spring 2 027-3873

26 Not required for Hystat machines (only bolts).27 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

280

D5K, D5G, D5CD5G IDLERS


Components of GroupIdler 2 9U-9065Bushing Assembly 2 1V-9611Bushing (29) 1 7K-1089Shaft 1 8E-7899Bearing Block 1 174-7006Bearing Block 1 174-7007Seal – Duo-Cone Group 2 9W-5224Toric Ring (29) 2 1M-3097Seal 2 1H-8128Seal 2 7F-8267Bolt 12 9B-7237Washer 12 8T-4896Lock 2 5M-5000Bolt 2 8C-6877Washer 2 7X-0618Stopper 1 7G-4332Plug 1 6Y-0473Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 5K-6191Toric Ring (29) 2 2S-2181

D5C IDLERS(PER MACHINE) QUANTITY PART NUMBERIdler Group 2 – (30)

Components of GroupIdler 2 9U-9065Bushing Assembly 2 1V-9611Bushing (29) 1 7K-1089Shaft 1 8E-7899Bearing Block 1 8Y-6650Bearing Block 1 8Y-6651Seal – Duo-Cone Group 2 9W-5224Toric Ring (29) 2 1M-3097Seal 2 1H-8128Seal 2 7F-8267Bolt 12 9B-7237

28 Order 184-6592 Idler Group.29 Component of preceding assembly or group; quantity shown is quantity per assembly or group.30 Order 185-4038 Idler Group.

281

D5K, D5G, D5CD5C IDLERS (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERIdler Group 2 – (30)

Washer 12 8T-4896Lock 2 5M-5000Bolt 2 8C-6877Washer 2 7X-0618Stopper 1 7G-4332Plug 1 6Y-0473Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 5K-6191Toric Ring (31) 2 2S-2181

D5G, D5C SystemOne CENTER TREAD IDLERQUANTITY PART NUMBER

Idler Group 2 250-0367 (32)

Components of GroupIdler Assembly 250-0368 (33)

Shaft 243-5319 (33)

Bearing Block 1 250-9515 (33)

Bearing Block 1 250-9516 (33)

Seal – Duo-Cone Group 2 148-3533Toric Ring (31) 2 160-6631Seal - Shaft 0-Ring 2 7F-8267Lock 2 5M-5000Bolt 2 053-2294Washer 2 5M-2894Stopper 1 7G-4332Plug 1 9F-2247

D5K, D5G, D5C CARRIER ROLLERS(PER MACHINE) QUANTITY PART NUMBERGroup 2 6K-9880Components of GroupRoller Shell 1 9W-6174Shaft 1 6K-9861Plate 1 6K-9860Bolt 2 6V-4791

30 Order 185-4038 Idler Group.31 Component of preceding assembly or group; quantity shown is quantity per assembly or group.32 When installing Center Tread Idler for the first time, new yoke assembly, rock guards, carrier roller bracket assembly, and front end

guiding guards are required.33 Part Discontinued.

282

D5K, D5G, D5CD5K, D5G, D5C CARRIER ROLLERS (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERGroup 2 6K-9880Cup 2 3N-6411Cone 2 3N-6412Ring 1 1M-7914Cover 1 3K-6638Collar Assembly 1 1M-7918Plug 1 2P-0347Bolt 3 0L-1351Seal – Duo-Cone Group 1 9W-5224Toric Ring (34) 2 1M-3097Seal – Cover 1 5H-8848Seal – Plug 1 1S-8947Seal – Shaft O-Ring 1 1H-9696Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 1 5K-6191Toric Ring (34) 1 2S-2181

D5K, D5G, D5C SystemOne CARRIER ROLLERS(PER MACHINE) QUANTITY PART NUMBERCarrier Roller Group 2 362-0515

D5K, D5G, D5C TRACK ROLLERSCURRENT DESIGN

(PER MACHINE) QUANTITY PART NUMBERRoller Group (DF) 4 (35) 346-8807

Roller Group (SF) 8 347-0406

Roller Group (DF, Tall Flange) – (36) 347-4170


Cap 2 248-5323Bolt (16 mm) (D5K, D5G) 4 8T-0357Bolt (5/8") (D5C) 4 1A-8537Washer 4 5P-8247Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 5K-6191Toric Ring (38) 2 2S-2181

34 Component of preceding assembly or group; quantity shown is the quantity per group.35 6 Double Flange Roller Groups required for D5K XL/LGP, D5G XL/LGP, D5C XL/LGP machines.36 Optional DF roller for guiding; use quantity required for specific roller frame type.37 These components are not included in the roller group; quantities shown are required to mount each roller.38 Components of preceding assembly or group; quantity shown is quantity per assembly or Group.

283

D5K, D5G, D5CD5K, D5G SystemOne TRACK ROLLERS

(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) Roller Group 14 237-8201


Bolt (16 mm) 4 8T-0357Washer 4 5P-8247

D5C SystemOne TRACK ROLLERS(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) Roller Group 14 237-8201


Bolt (5/8") 4 1A-8537Washer 4 5P-8247

D5C TRACK ROLLERSFORMER DESIGN BOLT-ON RETAINER

(PER MACHINE) QUANTITY PART NUMBERRoller Group (DF) / Machine 4 –

Roller Group (SF) / Machine 8 –

Components of GroupRoller Shell (DF) 1 7G-4832Roller Shell (SF) 1 7G-4833Bearing (40) 2 8P-7002Shaft 1 8E-6573Retainer Assembly 2 237-8201Thrust Washer (41) 1 9G-9351Dowel (41) 4 1L-5072Bolt 12 0S-1594Washer 12 5M-2894Stabilizer Ring 2 7T-4030Seal – Duo-Cone Group 2 7T-4080Toric Ring (40) 1 8P-7003O-Ring (40) 1 6V-2699Seal – Retainer O-Ring 2 1H-6227Stopper 1 7G-4332Plug 1 6Y-0473Mounting Hardware (39)

End Cap 2 7G-4829Bolt (5/8") 4 1B-4367

39 These components are not included in the roller group; quantities shown are required to mount each roller.40 Components of preceding assembly or group; quantity shown is quantity per assembly or Group.41 These components are only to repair retainer assembly. See Special Instruction SEHS8515.

284

D5K, D5G, D5CD5C TRACK ROLLERSFORMER DESIGN BOLT-ON RETAINER(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERRoller Group (DF) / Machine 4 –

Roller Group (SF) / Machine 8 –

Washer 4 5P-8247Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 7T-4086Toric Ring (42) 1 7T-4087O-Ring (42) 1 6V-2699

D5K XL, LGP TRACK GUIDING GUARDS (REAR SPROCKET)(PER MACHINE) QUANTITY PART NUMBERGuard Assembly (Right Outer) 1 254-0681




Bolt (16 mm) 12 8T-4173Washer 12 8T-4122Guard Assembly (Right Upper) 1 262-5878




Bolt (M12) 4 8T-4183Bolt (M12) 4 8T-4139Washer 8 5P-1076

D5K XL, LGP SystemOne TRACK GUIDING GUARDS (REAR SPROCKET)(PER MACHINE) QUANTITY PART NUMBERGuard Assembly (Right Outer) 1 285-7502




Bolt (16 mm) 12 8T-4173Washer 12 8T-4122Guard Assembly (Right Upper) 1 262-5878Guard Assembly (Left Upper) 1 254-0669

42 Components of preceding assembly or group; quantity shown is quantity per assembly or Group.

285

D5K, D5G, D5CD5K XL, LGP SystemOne TRACK GUIDING GUARDS (REAR SPROCKET) (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERBolt (12 mm) 4 8T-4139Washer 4 5P-1076Guard Assembly (Top RH) 1 263-8365Guard Assembly (Top LH) 1 263-8366

Bolt (M12) 4 8T-4183Bolt (M12) 4 8T-4139Washer 8 5P-1076

D5G XL, LGP TRACK GUIDING GUARDS (REAR SPROCKET)(PER MACHINE) QUANTITY PART NUMBERGuard Assembly (Right Outer) 1 174-6992




Bolt (16 mm) 16 8T-4173Washer 16 8T-4122Guard Assembly (Right Inner) 1 132-3831

Guard Assembly (Left Inner) 1 132-3832

Bolt (12 mm) 8 8T-4139Washer 8 5P-1076Guard 2 132-3861Bolt (10 mm) 6 8T-4136Washer 6 8T-4121Guard Assembly (Top RH) 1 174-6983

Guard Assembly (Top LH) 1 174-6985Bolt (10 mm) 8 8T-4136Washer 8 8T-4121

D5G XL, LGP SystemOne TRACK GUIDING GUARDS (REAR SPROCKET)(PER MACHINE) QUANTITY PART NUMBERGuard Assembly (Right Outer) 1 276-1699Guard Assembly (Left Outer) 1 276-1700


Bolt (16 mm) 16 8T-4173Washer 16 8T-4122Guard Assembly (Right Inner) 1 276-1690


Bolt (12 mm) 8 8T-4139Washer 8 5P-1076

286

D5K, D5G, D5CD5G XL, LGP SystemOne TRACK GUIDING GUARDS (REAR SPROCKET) (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERGuard 2 132-3861Bolt (10 mm) 6 8T-4136Washer 6 8T-4121Guard Assembly (Top RH) 1 174-6983


Bolt (10 mm) 8 8T-4136Washer 8 8T-4121

D5C XL/LGP SystemOne TRACK GUIDNG GUARDS (REAR SPROCKET)*(PER MACHINE) QUANTITY PART NUMBERGuard Assembly (Right Outer) 1 276-1699




Bolt (5/8") 16 7X-0353Washer 16 8T-4122Guard Assembly (Right Inner) 1 276-1690


Bolt (12 mm) (Lower Position) 4 8T-4139Bolt (1/2") (Upper Position) 4 5C-6565Washer 8 5P-1076Guard 2 132-3861Bolt (10 mm) (Lower Position) 4 8T-4136Washer 4 8T-4121Bolt (3/8") (Upper Position) 2 4L-6454Washer 2 5P-1075Guard Assembly (Top RH) 1 132-4676


Bolt (3/8") 8 4L-6454Washer 8 5P-1075* When installing rear sprocket guard it will require using both inch and metric hardware. The inch hardware called in the this table is required to bolt guard as-semblies to the D5C track roller frame, which has inch threads.

D5C HYSTAT TRACK GUIDING GUARDS (REAR SPROCKET)4WS, 5HS, 6CS, 7PS, 9AS

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly (Right Outer) 1 132-6625




287

D5K, D5G, D5CD5C HYSTAT TRACK GUIDING GUARDS (REAR SPROCKET)4WS, 5HS, 6CS, 7PS, 9AS(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERBolt (5/8") 16 7X-0353Washer 16 8T-4122Guard Assembly (Right Inner) 1 132-3831


Bolt (1/2") 8 5C-6565Washer 8 5P-1076Guard 2 132-3861Bolt (3/8") 6 4L-6454Washer 6 5P-1075Guard Assembly (Top RH) 1 132-4676

Guard Assembly (Top LH) 1 132-4677Bolt (3/8") 4 4L-6454Bolt (3/8") 4 5S-7379Washer 8 5P-1075

D5C TRACK GUIDING GUARDS (REAR SPROCKET)6ZL795-UP, 7YL121, 8ZS1-UP, 9DL2236-UP

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly (Right Outer, Left Inner) 2 132-3849Guard Assembly (Left Outer, Right Inner) 2 132-3830Bolt (5/8") 16 7X-0353Washer 16 8T-4122Guard Assembly (Right Outer, Left Inner) 2 132-3832Guard Assembly (Left Outer, Right Inner) 2 132-3831Bolt (1/2") 16 5C-6565Washer 16 5P-1076Guard Assembly (Top RH and LH) 2 132-4912Bolt (3/8") 4 4L-6454Bolt (3/8") 4 5S-7379Washer 8 5P-1075

D5K XL, LGP SystemOne END GUIDING GUARDS (FRONT)(PER MACHINE) QUANTITY PART NUMBERPlate 2 310-7375Plate 2 310-7376Bolt (M10) 16 8T-0722Washer 16 8T-4121

288

D5K, D5G, D5CD5G, D5C, XL LGP END GUIDING GUARDS (FRONT)

(PER MACHINE) QUANTITY PART NUMBERFrontGuard Assembly 2 152-7182Guard Assembly 2 152-7183

D5C END GUIDING GUARDS(PER MACHINE) QUANTITY PART NUMBERFront (Outer LH, Inner RH)Guard Assembly 1 8Y-8909Wear Strip 1 105-4125Front (Outer RH, Inner LH)Guard Assembly 1 8Y-8908Wear Strip 1 105-4125Rear (Outer RH, Inner LH)Guard Assembly 1 8Y-8912Rear (Outer LH, Inner RH)Guard Assembly 1 8Y-8911

D5G, D5C XL/LGP SystemOne END GUIDING GUARDS (FRONT)REQUIRED WITH CENTER TREAD IDLERS

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 265-0929Guard Assembly 2 265-0932Strip - Wear (20 mm Thick) (43) 4 265-0934Strip - Wear (5 mm Thick) (43) 8 265-0935Bolt (12 mm) 16 8T-4176Washer 16 8T-4223Strip - Wear (5 mm Thick) (Place on Top of Frame) 4 265-0935

Bolt (12 mm) 8 8T-4139Washer 8 8T-4223

D5G, D5C XL/LGP SystemOne END GUIDING WEAR STRIPS (FRONT)REQUIRED WITH CONVENTIONAL IDLERS

(PER MACHINE) QUANTITY PART NUMBERWear Strip (Wear Strip) (44) 2 250-9505Wear Strip (38 mm Thick) (44) 2 265-0929

43 Place between bottom of track roller frame and guard assembly.44 Remove current wear strips from existing front end guiding guards, weld a 5 mm shim (supplied by the dealer) and wear strips to exist-

ing front end guiding guards.

289

D5K, D5G, D5CD5K XL/LGP TRACK ROLLER GUARD (FULL LENGTH)

USE WITH REAR SPROCKET GUARDS(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 263-2009Guard Assembly 2 263-2010Bolt (12 mm) 24 8T-4184Spacer 24 145-5181Bolt (12 mm) (Guard to Front Guide) 8 8T-4139Washer 8 5P-1076Bolt (M16) (Guard to Rear Guard) 4 7X-2553Washer 4 8T-4122Bolt (M12) (Guard to Rear Guard) 4 8T-4176Washer 4 7X-0550

D5K, XL LGP SystemOne TRACK ROLLER GUARDS (FULL LENGTH)USE WITH REAR SPROCKET GUARD

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 286-1858Guard Assembly 2 286-1859Bolt (12 mm) 24 8T-4184Spacer 24 145-5181Bolt (12 mm) (Guard to Front Guide) 8 8T-4139Washer 8 5P-1076Bolt (M16) (Guard to Rear Guard) 4 7X-2553Washer 4 8T-4122Bolt (M12) (Guard to Rear Guard) 4 8T-4176Washer 4 7X-0550

D5G XL LGP TRACK ROLLER GUARDS (FULL LENGTH)USE WITH REAR SPROCKET GUARD

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 183-2381Guard Assembly 2 183-2382Bolt (12 mm) 20 8T-4956Washer 20 2M-0849Pipe 10 8Y-7125Bolt (12 mm) 10 152-7146Washer 20 8T-4223Nut 10 8T-4244Tab (Front) 4 8Y-3413Bolt (10 mm) 4 8T-4136Washer 4 8T-4121Plate (Rear) 4 138-1946Plate (Rear Threaded Holes) 4 180-7321

290

D5K, D5G, D5CD5G XL LGP TRACK ROLLER GUARDS (FULL LENGTH)USE WITH REAR SPROCKET GUARD(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERBolt (12 mm) 8 8T-4184Washer 8 5P-8245

D5G, D5C XL/LGP SystemOne TRACK ROLLER GUARD (FULL LENGTH)(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 276-1680Guard Assembly 2 276-1681Bolt (12 mm) (Guard As. to Frame) 20 8T-4956Washer 20 2M-0849Pipe 10 8Y-7125Bolt (12 mm) 10 152-7146Washer 20 8T-4223Nut 10 8T-4244Bolt (10 mm) (Guard As. To Front Guard) 4 8T-4195Washer 4 8T-4121Plate (Rear) 4 276-1718Plate (Rear Threaded Holes) 4 180-7321Bolt (12 mm) 8 8T-4183Washer 8 5P-8245

D5C STD, D5C LGP TRACK ROLLER GUARDS (FULL LENGTH)6 ROLLER, USE WITH TRACK GUIDING GUARDS (REAR SPROCKET)

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 138-1934Guard Assembly 2 138-1935Bolt (1/2") 16 8T-8917Washer 16 8T-4223Pipe 8 8Y-7125Bolt (1/2") 8 8S-3887Nut 8 6V-8188Washer 8 8T-4223Tab (Front) 4 8Y-3413Bolt (3/8") 4 4L-6454Washer 4 8T-4896Plate (Rear) 4 138-1946Plate (Rear Threaded Holes) 4 138-1945Bolt (1/2") 8 8T-8919Washer 8 5P-8245

291

D5K, D5G, D5CD5C XL TRACK ROLLER GUARDS (FULL LENGTH)7 ROLLER, USE WITH TRACK GUIDING GUARDS (REAR SPROCKET)

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 138-9696Guard Assembly 2 138-9697Bolt (1/2") 20 8T-8917Washer 20 8T-4223Pipe 10 8Y-7125Bolt (1/2") 10 8S-3887Nut 10 6V-8188Washer 10 8T-4223Tab (Front) 4 8Y-3413Bolt (3/8") 4 4L-6454Washer 4 8T-4896Plate (Rear) 4 138-1946Plate (Rear Threaded Holes) 4 138-1945Bolt (1/2") 8 8T-8919Washer 8 5P-8245

D5K XL/LGP CENTER GUIDING GUARDS(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 282-3679Bolt (12 mm) 8 8T-4194Nut 8 198-4778

D5K XL/LGP SystemOne CENTER GUIDING GUARDS(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 276-1755Bolt (12 mm) 8 8T-4194Nut 8 198-4778

D5G XL/LGP SystemOne CENTER GUIDING GUARDSREQUIRED WITH CENTER TREAD IDLER

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 276-1695Bolt (12 mm) 8 8T-4194Nut 8 198-4778

292

D5K, D5G, D5CD5C XL/LGP SystemOne CENTER GUIDING GUARDS

REQUIRED WITH CENTER TREAD IDLER(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 276-1695Bolt (1/2") 8 8T-4835Nut 8 198-4778

D5K XL, LGP IDLER GUARDSCONVENTIONAL IDLER

(PER MACHINE) QUANTITY PART NUMBERBracket Assembly (To Frame) 2 305-1456Bracket Assembly (To Frame) 2 305-1458Bolt (M12) (Bracket Assembly to Frame) 8 8T-4192Washer 8 7X-0584Guard 2 305-1463Plate 2 305-1464Plate 2 305-1465Bolt (M12) (Plate and Guard to Bracket Assembly) 8 8T-4956Washer 8 8T-4223Plate 2 290-2700Bolt (M10) 4 8T-4195Washer 8 7X-7729Nut (M10) 4 8T-4133Bracket Assembly (Front) 2 305-1460Bracket Assembly (Front) 2 305-1462Bolt (M12) (Bracket Assembly to Bracket Assembly) 4 8T-4139Bolt (M12) 8 8T-4184Washer 12 8T-4223

D5K XL, LGP SystemOne IDLER GUARDSCENTER TREAD IDLER

(PER MACHINE) QUANTITY PART NUMBERBracket Assembly (To Frame) 2 305-1466Bracket Assembly (To Frame) 2 305-1469Bolt (M12) (Bracket Assembly to Frame) 8 8T-4192Washer 8 7X-0584Guard 2 305-1474Plate 4 305-1475Bolt (M12) (Plate and Guard to Bracket Assembly) 8 8T-4956Washer 8 8T-4223Plate 2 290-2700Bolt (M10) 4 8T-4195Washer 8 7X-7729Nut (M10) 4 8T-4133

293

D5K, D5G, D5CD5K XL, LGP SystemOne IDLER GUARDSCENTER TREAD IDLER(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERBracket Assembly (Front) 2 305-1471Bracket Assembly (Front) 2 305-1473Bolt (M12) (Bracket Assembly to Bracket Assembly) 4 8T-4139Bolt (M12) 8 8T-4184Washer 12 8T-4223

D5C STD, D5C XL UPPER FRAME ROLLER FRAME GUARDS*(PER MACHINE) QUANTITY PART NUMBERRoller Frame Guard (RH) 1 8Y-8920Roller Frame Guard (LH) 1 8Y-8921Idler Guard 2 8Y-8799Sprocket Guard 2 8Y-8800Wiper Guard (RH) 1 8Y-8822Wiper Guard (LH) 1 8Y-8823Lug 20 8Y-6640Bracket 2 6S-6741Bolt 42 5S-7379Bolt 6 8T-8917Washer 42 5P-1075Washer 6 8T-4223* This guarding package has shown a marked improvement in undercarriage wear life when used in loose abrasive soils. The purpose of the guarding us to shedmaterial and prevent its entry into the undercarriage system (link box area).

D5C LGP UPPER FRAME ROLLER FRAME GUARDS*(PER MACHINE) QUANTITY PART NUMBERRoller Frame Guard (RH) 1 8Y-8948Roller Frame Guard (LH) 1 8Y-8949Idler Guard 2 8Y-8799Sprocket Guard 2 8Y-8800Wiper Guard (RH) 1 8Y-8822Wiper Guard (LH) 1 8Y-8823Lug 20 8Y-6640Bracket 2 6S-6741Bolt 42 5S-7379Bolt 6 8T-8917Washer 42 5P-1075Washer 6 8T-4223* This guarding package has shown a marked improvement in undercarriage wear life when used in loose abrasive soils. The purpose of the guarding us to shedmaterial and prevent its entry into the undercarriage system (link box area).

294

D5K, D5G, D5CD5G XL/LGP UPPER FRAME ROLLER FRAME GUARDS

(PER MACHINE) QUANTITY PART NUMBERRoller Frame Guard Assembly (RH) 1 174-6977

Roller Frame Guard Assembly (LH) 1 174-6978Guard 2 176-1281Cover Group 2 198-3378Bolt (M10) 16 8T-4136Bolt (10M) 16 8T-4137Washer 32 8T-4121

D5G XL/LGP SystemOne UPPER FRAME ROLLER FRAME GUARDS(PER MACHINE) QUANTITY PART NUMBERRoller Frame Guard Assembly (RH) 1 174-6977

Roller Frame Guard Assembly (LH) 1 174-6978Guard 2 252-1578Bracket Assembly 2 265-0940Cover Group 2 198-3378Bolt (M10) 24 8T-4136Bolt (10M) 12 8T-4137Washer 36 8T-4121

D5G, D5C XL/LGP SystemOne IDLER ROCK GUARDREQUIRED WITH CENTER TREAD IDLER

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly (RH) 2 252-5169Guard Assembly (LH) 2 252-5170Bolt (12 mm) 16 8T-4183Washer 16 7X-0584

D5G, D5C XL/LGP IDLER ROCK GUARDSUSE WITH CONVENTIONAL IDLER

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly (RH) 2 105-0929Guard Assembly (LH) 2 105-0930Bolt (1/2 ") 16 5P-2566Washer 16 7X-0584

295

D6K, PL61D6K XL/LGP, PL61 SystemOne TRACK

PRESS FIT MASTER, CLAMP MASTERFBH, DHA, WGS

7.50" (190.5 mm) PITCH –18 mm BOLTQUANTITY PART NUMBER

Link Assembly - 40 Section 2 424-3547Components of Link AssemblyLink Box Standard (1) 20 424-3546Standard Link 38 235-2529Standard Link (Press Fit) (2) 2 235-2529Clamp Master Links (2) 2 318-2486Track Hardware (2)

Master Bolts 4 254-0227Bolt (M18) 160 238-0472Nut 160 238-0473

D6K, PL61 SystemOne TRACK SHOES7.50" (190.5 mm) PITCH –18 mm BOLT



Moderate Service 20.0" (510 mm) 235-2554 –

Moderate Service (Center Hole) 20.0" (510 mm) 289-3085 –

Moderate Service 22.0" (560 mm) 235-2533 235-2533Moderate Service 24.0" (610 mm) 277-2239 –

Moderate Service 30.0" (760 mm) 235-2534 255-4182Extreme Service 20.0" (510 mm) 277-2238 –

Extreme Service 22.0" (560 mm) 246-5727 246-5727Extreme Service 24.0" (610 mm) 277-2240 –

Extreme Service 26.0 (660 mm) 327-5831 372-0548Extreme Service 30.0" (760 mm) 246-5726 255-4184

D6K, PL61 SystemOne SPROCKETSDHA1 - 1999, FBH1 - 2299

(PER SIDE) QUANTITY PART NUMBERSprocket (27 Tooth) 1 255-8095

Bolt (5/8") 27 3S-8182Nut 27 7H-3607

1 Link Box Standard that is greater than 40% worn should be replaced with part number 264-9766.2 Not part of link assembly; required to assemble track group.

296

D6K, PL61D6K XL/LGP SystemOne RELIEVED SPROCKET SEGMENTS

DHA2000 – Up, FBH2300 – Up

(PER SIDE) QUANTITY PART NUMBERSprocket Segment 3 361-3976Sprocket Segment 3 361-3977Bolt 27 197-9674Washer 27 6V-4316Nut 27 8T-3980

D6K, PL61 SystemOne SPROCKETED RELIEVED TREAD IDLERS(PER MACHINE) QUANTITY PART NUMBERIdler Group - Sprocketed 2 362-3918 (3)

Idler Group - Sprocketed 2 358-8557 (4)

Components of GroupIdler Assembly 1 358-8556Bearing 2 243-5321Seal – Duo-Cone Group 2 148-3533Toric Ring 2 160-6631Seal – Shaft O-Ring 2 7F-8267Plug 1 9W-2146

D6K, PL61 SystemOne CARRIER ROLLERS(PER MACHINE) QUANTITY PART NUMBERCarrier Roller Group 2 362-0515 (5)

Carrier Roller Group 2 375-6431 (6)

D6K SystemOne TRACK ROLLERS(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) Roller Group 14 357-5368


Cap 2 218-4993Bolt (16 mm) 4 137-3301Washer 4 9X-8268

3 Eccentric cam height adjustment for DHA1 - 2032, FBH1 - 2348 all; DHA2033 - up, FBH2349 - up, if UC has 7 bottom rollers & 1 carrierroller

4 Square block height adjustment for DHA2033 - up, FBH2349 - up, if UC has 8 bottom rollers & 2 carrier rollers5 DHA1 - 1793, FBH1 - 2124; 41.2 mm shaft dia6 DHA1794 - up, FBH2125 - up; 49.0 mm shaft dia7 These components are not included in the roller group; quantities shown are required to mount each roller.

297

D6K, PL61PL61 SystemOne TRACK ROLLERS




D6K, PL61 SystemOne END GUIDING GUARDS (Front)(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 215-1574Bolt (M16) 12 8T-4140Spacer 12 204-6365

D6K, PL61 SystemOne END GUIDING GUARDS (REAR SPROCKET)(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 261-2082Guard Assembly 2 261-2083Bolt (M16) 8 8T-4140Spacer 8 204-6365Bolt (M16) 4 8T-4174Washer 4 9X-8257Sheet Assembly (Outer RH) 1 251-8532

Sheet Assembly (Inner RH) 1 251-8531

Sheet Assembly (Outer LH) 1 271-6080

Sheet Assembly (Inner LH) 1 271-6081

Bolt (M12) (Sheet As. to Guard As.) 4 8T-4194Washer 4 198-4778Bolt (M12) 4 8T-4183Washer 4 8T-4223Bolt (M12) (Sheet As. to Sheet As.) 2 8T-5092Washer 2 198-4778

D6K SystemOne CENTER GUIDING GUARDSLEVEL ONE GUIDING

Position guard over roller 4

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 251-8580Bolt (M16) 8 8T-4140Spacer 8 204-6365

8 These components are not included in the roller group; quantities shown are required to mount each roller.

298

D6K, PL61D6K SystemOne CENTER GUIDING GUARDS

LEVEL TWO GUIDINGPosition guard over rollers 2 & 5

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 251-8580Bolt (M16) 16 8T-4140Spacer 16 204-0365

D6K SystemOne TRACK ROLLER GUARDS (FULL LENGTH)LEVEL THREE GUIDING

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 261-2070Bolt (M16) 20 8T-4140Spacer 20 204-6365Bolt (M16) 6 8T-6382Tube 6 271-6033Washer 12 9X-8257Locknut 6 8T-4778

D6K, PL61 SystemOne IDLER SCRAPER GUARDS(PER MACHINE) QUANTITY PART NUMBERGuard Assembly (RH) 2 271-6085Guard Assembly (LH) 2 271-6086Bolt (M12) 12 8T-4194Washer 12 198-4778

299

D6K2D6K2 XL/LGP SystemOne TRACK

RST, WMR7.50" (190 mm) PITCH - 18 mm Bolt

(PER MACHINE) QUANTITY PART NUMBERLink Assembly (40 sections) 2 424-3547Components of Link AssemblyLink Box Standard 20 424-3546Link Box Standard 38 235-2529Standard Link – Track (Press Fit) (1) 2 235-2529Clamp Master Link (1) 2 318-2486Track Hardware (1)

Track Bolt M18 160 238-0472Track Nut 160 238-0473Clamp Master Bolts 4 254-0227

D6K2 XL/LGP SystemOne TRACK SHOES7.50" (190 mm) PITCH - 18 mm Bolt

TYPE WIDTH SHOEPART NUMBER


Moderate Service 20.0" (510 mm) 235-2554 –

Moderate Service Shoe (Center Hole) 20.0" (510 mm) 289-3085 –

Moderate Service Shoe 22.0" (560 mm) 235-2533 –

Moderate Service Shoe 24.0" (610 mm) 277-2239 –

Moderate Service Shoe 30.0" (760 mm) 235-2534 255-4182Extreme Service Shoe 20.0" (510 mm) 277-2238 –

Extreme Service Shoe 22.0" (560 mm) 246-5727 –

Extreme Service Shoe 24.0" (610 mm) 277-2240 –

Extreme Service Shoe 26.0” (660 mm) 327-5831 372-0548Extreme Service Shoe 30.0" (760 mm) 246-5726 255-4184

- Uses regular shoe for master shoe

D6K2 XL/LGP SystemOne RELIEVED SPROCKET SEGMENTS(PER SIDE) QUANTITY PART NUMBERSprocket Segment 3 361-3976Sprocket Segment 3 361-3977Bolt 27 197-9674Washer 27 6V-4316Nut 27 8T-3980

1 Not part of Link Assembly; required to assemble track group.

300

D6K2D6K2 XL/LGP SystemOne SPROCKETED RELIEVED TREAD IDLERS*

(PER MACHINE) QUANTITY PART NUMBERSprocketed Idler Group 2 358-8557Components of GroupIdler Assembly & Bearing 1 358-8556Bearing 2 243-5321Other ComponentsShaft 1 248-5327Dowel 2 251-8512Idler Block 2 360-3534Seal Group - Duo Cone 2 148-3533Seal - Shaft O-Ring 2 7F-8267Plug 1 9W-2146

* D6K2 idlers have square block height adjustment — Reference SEBU8595 for shims / instructions

D6K2 XL/LGP SystemOne ROLLERSQTY PERMACHINE

PART NUMBER

Single Flange Roller Group 16 357-5368Roller HardwareCap 32 218-4993Bolt - (16 mm) 64 137-3301Washer 64 9X-8268

D6K2 XL/LGP SystemOne CARRIER ROLLERS(PER MACHINE) QUANTITY PART NUMBERCarrier Roller Group 4 375-6431 (2)

D6K2 XL/LGP SystemOne END GUIDING GUARDS (FRONT)(PER MACHINE) QUANTITY PART NUMBERWear Strip 4 384-7390Bolt M16 12 8T-4183Washer 12 8T-4223

D6K2 XL/LGP SystemOne END GUIDING GUARDS (REAR SPROCKET)(PER MACHINE) QUANTITY PART NUMBERGuard Assembly (Rear ) 2 384-7392Guard Assembly (Rear ) 2 384-7393Bolt M16 12 8T-4140

2 49.0 mm shaft dia

301

D6K2D6K2 XL/LGP SystemOne END GUIDING GUARDS (REAR SPROCKET) (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERSpacer 12 204-6365Strip (Front) 4 384-7390Washer 12 8T-4223Bolt M12 12 8T-4183

D6K2 XL/LGP SystemOne CENTER GUIDE GUARDLEVEL ONE GUIDING


(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 380-7971Bolt M16 8 8T-4140Spacer 8 204-6365

D6K2 XL/LGP SystemOne CENTER GUIDE GUARDLEVEL TWO GUIDING

Position guards over rollers 2 & 5


D6K2 XL/LGP SystemOne TRACK ROLLER GUARDS (FULL LENGTH)LEVEL THREE GUIDING

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 380-7969Guard Assembly 2 380-7970Spacer 24 204-6365Tube 6 205-6140Bolt M16 6 110-6968Bolt M16 24 8T-4140Washer 12 9X-8257Locknut M16 6 8T-4778

D6K2 XL/LGP HEAVY DUTY TRACKRST, WMR

7.50" (190.5 mm) PITCH – 3/4” BoltPART NUMBER SEC 40 XL/LGP

Link Assembly - (Quantity 2) 110-2976Components of Link AssemblyRH Pin End Master 106-1627 1LH Pin End Master 106-1628 1

302

D6K2D6K2 XL/LGP HEAVY DUTY TRACKRST, WMR7.50" (190.5 mm) PITCH – 3/4” Bolt(Cont'd.)

PART NUMBER SEC 40 XL/LGPRH Bushing End Master 106-1629 1LH Bushing End Master 106-1630 1RH Regular 106-1625 39LH Regular 106-1626 39Pin 179-0126 40Bushing 106-1618 40Seal Assembly (Rigid) 250-3988 80Thrust Ring 152-8070 80Stopper 5G-2247 40Plug 6Y-0473 40Track HardwareBolt 6V-1792 156Nut 1S-1860 156Master Bolt 107-0719 2Master Bolt 106-1642 2

D6K2 XL/LGP HEAVY DUTY TRACK SHOES7.50" (190.5 mm) PITCH – 3/4” Bolt

SHOE TYPE WIDTHSHOE

PART NUMBERMASTER SHOEPART NUMBER

Extreme Service Shoe 20” (510 mm) 106-1604 106-1612Extreme Service Shoe 22” (560 mm) 106-1607 106-1613Extreme Service Shoe 30” (760 mm) 379-8893 (3) 379-8894 (3)

D6K2 XL/LGP HEAVY DUTY SPROCKETS(PER MACHINE) QUANTITY PART NUMBERSprocket Segment 3 363-3569Sprocket Segment 3 363-3570Bolt M16 27 197-9674Nut 27 8T-3980Washer 27 6V-4316

D6K2 XL/LGP HEAVY DUTY IDLERS*(PER MACHINE) QUANTITY PART NUMBERIdler Group 2 368-9791Components of Group

3 For use with LGP Machines only

303

D6K2D6K2 XL/LGP HEAVY DUTY IDLERS* (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERIdler Assembly & Bearing 1 368-9792Bearing 2 243-5321Other ComponentsShaft 1 248-5327Dowel 2 251-8512Idler Block 2 360-3534Seal Group - Duo Cone 2 148-3533Seal - Shaft O-Ring 2 7F-8267Plug 1 9W-2146

* D6K2 idlers have square block height adjustment — Reference SEBU8595 for shims / instructions

D6K2 HEAVY DUTY TRACK ROLLERSQUANTITY PER MACHINE PART NUMBER

Single Flange Roller Group 8 365-0752Double Flange Roller Group 8 365-0751Roller HardwareCap 32 218-4993Roller Hardware 64 137-3301Roller Hardware 64 9X-8268

D6K2 XL/LGP CARRIER ROLLERS(PER MACHINE) QUANTITY PART NUMBERCarrier Roller Group 4 372-3375 (4)

D6K XL/LGP HEAVY DUTY END GUIDING GUARDS(PER MACHINE) QUANTITY PART NUMBERGuard Assembly (Rear) 2 382-6505Guard Assembly (Rear) 2 382-6506Strip (Rear) 4 380-7978Bolt M16 12 8T-4140Bolt 12 8T-4192Washer 12 8T-4223Washer 4 380-7977Washer 12 8T-4223Bolt M12 12 8T-4192

4 49.0 mm shaft dia

304

D6K2D6K2 XL/LGP HEAVY DUTY CENTER GUIDE GUARD

LEVEL ONE GUIDINGPosition guard over roller 4


D6K2 XL/LGP HEAVY DUTY CENTER GUIDE GUARDLEVEL TWO GUIDING

Position guards over rollers 2 & 5


D6K2 XL/LGP HEAVY DUTY TRACK ROLLER GUARDS (FULL LENGTH)LEVEL THREE GUIDING

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 380-7986Guard Assembly 2 380-7987Spacer 24 204-6365Tube 6 205-6140Bolt M16 6 110-6968Bolt M16 24 8T-4140Washer 12 9X-8257Locknut M16 6 8T-4778

305

D7ED7E STD, LGP HEAVY DUTY SEALED AND LUBRICATED TRACK

STD: MDB1-UP, TANI-UP, LGP: SCG1-UP, TJAI-UP8.50" (215.9 mm) PITCH – 7/8" BOLT

PART NUMBER 40 SECTION 44 SECTIONLink Assembly – (Quantity 2) 115-6301 327-9305Components of Link AssemblyTrack LinksRH Pin End Master 6I-9241 1 1LH Pin End Master 6I-9242 1 1RH Bushing End Master 6I-9243 1 1LH Bushing End Master 6I-9244 1 1RH Regular 6I-9239 39 43LH Regular 6I-9240 39 43Other ComponentsPin 115-4923 40 44Bushing 115-4924 40 44Seal Assembly (Rigid) 239-7943 80 88Thrust Ring 152-8073 80 88Stopper 7G-4332 40 44Plug 6Y-0454 40 44Track Hardware (1)

Bolt (7/8") 7H-3599 156 172Nut 2S-2140 156 172Master Bolt (7/8") 9W-9058 2 2Master Bolt (7/8") 6V-1723 2 2Special Sets/GroupsSeal Set (90 Seal Assemblies) 272-6013 1 1Bushing and Seal Group (40 Sections) 272-7103 1 1

D7E ROTATING BUSHING TRACKLGP: SCG1-UP

8.50" (215.9 mm) PITCH – 7/8" BOLT

QUANTITY PART NUMBERLink Assembly – 44 Section 2 364-0693Components of Link AssemblyTrack LinksRH Pin End Master 1 6I-9241LH Pin End Master 1 6I-9242RH Bushing End Master (2) 1 165-1760LH Bushing End Master (2) 1 165-1761RH Regular (2) 43 165-1758LH Regular (2) 43 165-1759

1 Not part of link assembly; required to assemble track group.2 Joint Assembly (Includes link and insert). Insert not serviced.

306

D7ED7E ROTATING BUSHING TRACKLGP: SCG1-UP8.50" (215.9 mm) PITCH – 7/8" BOLT(Cont'd.)

QUANTITY PART NUMBERLink Assembly – 44 Section 2 364-0693Components of Link AssemblyOther ComponentsPin 44 152-8080Bushing 44 165-1770Seal 176 239-7943Thrust Ring 176 152-8073Track Hardware (3)

Bolt (7/8") 172 7H-3599Nut 172 2S-2140Master Bolt (7/8") 2 9W-9058Master Bolt (7/8") 2 6V-1723

D7E HEAVY DUTY TRACK SHOES8.50" (215.9 mm) PITCH – 7/8" BOLT

WIDTH PART NUMBERModerate Service 24" (610 mm) 326-1127Moderate Service 26" (660 mm) 326-1129Moderate Service 36" (915 mm) (4) 326-1134Extreme Service 24" (610 mm) 326-1138Extreme Service 26" (660 mm) 326-1140Extreme Service 36" (915 mm) (4) 326-1143

D7E STD/LGP SPROCKETSQUANTITY PART NUMBER

Sprocket Segment (Tough Steel) (5 Tooth) (5) 5 324-3327

Bolt 25 295-7802Nut 25 8T-3573Washer 25 8T-3282

D7E STD/LGP IDLERSQUANTITY PART NUMBER

Idler Group 2 351-8928Components of GroupIdler Assembly & Bearing 2 192-0223

3 Not part of link assembly; required to assemble track group.4 For use with LGP Machines only.5 Reference service magazine SEPD1459

307

D7ED7E STD/LGP IDLERS (Cont'd.)

QUANTITY PART NUMBERIdler Group 2 351-8928

Components of GroupBearing (6) 2 6Y-1757Shaft 1 351-8927Retainer 2 192-0213Thrust Washer 2 8E-6619Bolt 24 5P-9681Washer 24 3K-6113Seal GP - Duo Cone (6) 2 162-7862Seal 2 2H-9247Seal 2 7J-2036Collar Seal 2 107-3945Stopper 1 9G-5664Plug 1 6Y-0473GuardsGuard As Rear 2 327-9329Plate As 2 327-9331Plate 4 327-9330Plate 4 329-3982Bolt M16 8 8T-4140Washer 12 8T-4122Bolt Hex Head M16 8 7X-2553Washer 4 259-8137

D7E CARRIER ROLLERSQUANTITY PART NUMBER

Carrier Roller Group 4 428-0056

D7E ROLLERSQUANTITY PART NUMBER

Double Flange (DF) 6 (7) 323-5928Single Flange (SF) 8 323-5925Tall Double (DF) (8) 6 323-5931Mounting Hardware (9)

Roller Cap 2 222-7244Bolt 4 8T-0667Washer 4 6V-8237

6 Component of preceding assembly or group; quantity shown is quantity per assembly or group.7 8 DF rollers required for LGP machines.8 Optional DF rollers for guiding; Use quantity for specific roller frame type.9 These components are not included in the roller group; quantities shown are required to mount each roller.

308

D7ED7E STD/LGP FRONT END GUIDE GUARDS

QUANTITY PART NUMBERPlate As RH 2 329-3980Plate As LH 2 329-3981Bolt M16 20 8T-4140Washer 20 259-8137

D7E STD CENTER GUIDE GUARDLevel Two Guiding

Position guard over rollers 3 and 5

QUANTITY PART NUMBERGuard Assembly 4 327-6077Bolt M24 16 8T-5878Spacer 16 311-2557

D7E LGP CENTER GUIDE GUARDLevel One Guiding



D7E LGP CENTER GUIDE GUARDLevel Two Guiding

Position guard over rollers 3 and 5


D7E STD FULL LENGTH ROLLER GUARDLevel Three Guiding(Full Length)

QUANTITY PART NUMBERPlate 20 299-4179Bar 10 310-8534Spacer 20 311-2557Guard Assembly 2 328-3369Guard Assembly 2 328-3370Washer 40 3E-4356Bolt M24 40 8T-5878Bolt M16 20 8T-4140

309

D7ED7E LGP FULL LENGTH ROLLER GUARD

Level Three Guiding(Full Length)

QUANTITY PART NUMBERPlate 24 299-4179Bar 12 310-8534Spacer 24 311-2557Guard Assembly 2 328-3369Guard Assembly 2 328-3370Washer 48 3E-4356Bolt M24 48 8T-5878Bolt M16 24 8T-4140

D7E STD/LGP SPROCKET GUIDE GUARDSQUANTITY PART NUMBER

Guard Assembly RH 2 338-7441Guard Assembly LH 2 338-7442Guard Assembly RH 2 340-2777Guard Assembly LH 2 340-2778Bolt M24 16 8T-5878Spacer 16 311-2557Bolt Hex Head M16 28 7X-2553Washer 28 198-4780

310

D4D4 SEALED AND LUBRICATED TRACK

CURRENT MODEL24A, 29A, 30A, 39A, 40A, 54A, 55A, 69A, 78A, 85A, 86A, 91A, 22C, 97F, 44H, 47H, 20J, 49J, 60J, 61J, 66J, 82J, 83J, 84J, 7R, 69K, 6U, 7U,

74U, 27X, 28X, 29X, 52X6.75" (171.5 mm) PITCH – 5/8" BOLT

PARTNUMBER 35 SECTION 36 SECTION 37 SECTION 40 SECTION

Link Assembly – (Quantity 2) 154-3652 154-3656 – (1) 154-3657Components of Link AssemblyTrack LinksRH Pin End Master 1V-4603 1 1 1 1LH Pin End Master 1V-4604 1 1 1 1RH Bushing End Master 1V-4605 1 1 1 1LH Bushing End Master 1V-4606 1 1 1 1RH Regular 9K-6629 34 35 36 39LH Regular 9K-6628 34 35 36 39Other ComponentsPin 154-3664 (2) 35 36 37 40Bushing 7T-4628 35 36 37 40Seal Assembly (Rigid) 250-4004 70 72 74 80Thrust Ring 1V-3361 70 72 74 80Stopper 5G-2247 35 36 37 40Plug 6Y-0473 35 36 37 40Track Hardware (3)

Bolt 7H-3597 136 140 144 156Nut 1M-1408 136 140 144 156Master Bolt 3P-2274 4 4 4 4Special Sets/GroupsBushing and Seal Group (40 Sections) 154-3654 1 1 1 1Seal Set (80 Seal Assemblies) 252-7862 1 1 1 1

D4 SEALED TRACKCURRENT MODEL

24A, 29A, 30A, 39A, 40A, 54A, 55A, 69A, 78A, 85A, 86A, 91A, 22C, 97F, 44H, 47H, 20J, 49J, 60J, 61J, 66J, 82J, 83J, 84J, 7R, 69K, 6U, 7U,74U, 27X, 28X, 29X, 52X


NUMBER 35 SECTION 36 SECTION 37 SECTION 40 SECTIONLink Assembly (Quantity 2) – (4) 1V-7072 – (5) 1V-7075Components of Link AssemblyTrack LinksRH Pin End Master 1V-4603 1 1 1 1

1 Order 36 section 154-3656 or 40 section 154-3657 link assembly and add or remove appropriate number of sections.2 Former Pin 9K-8550 (Use 9G-1642 Stopper)3 Not part of link assembly; required to assemble track group.4 Order 36 section 1V-7072 or 40 section 1V-7075 link assembly and remove appropriate number of sections.5 Order 36 section 1V-7072 or 40 section 1V-7075 link assembly and add or remove appropriate number of sections.

311

D4D4 SEALED TRACKCURRENT MODEL24A, 29A, 30A, 39A, 40A, 54A, 55A, 69A, 78A, 85A, 86A, 91A, 22C, 97F, 44H, 47H, 20J, 49J, 60J, 61J, 66J, 82J, 83J, 84J, 7R, 69K, 6U, 7U,74U, 27X, 28X, 29X, 52X6.75" (171.5 mm) PITCH – 5/8" BOLT(Cont'd.)

PARTNUMBER 35 SECTION 36 SECTION 37 SECTION 40 SECTION

Link Assembly (Quantity 2) – (4) 1V-7072 – (5) 1V-7075Components of Link AssemblyLH Pin End Master 1V-4604 1 1 1 1RH Bushing End Master 1V-4605 1 1 1 1LH Bushing End Master 1V-4606 1 1 1 1RH Regular 9K-6629 34 35 36 39LH Regular 9K-6628 34 35 36 39Other ComponentsPin 9K-4060 35 36 37 40Bushing 9K-4061 35 36 37 40Seal 7K-2018 140 144 148 160Track Hardware (6)

Bolt 7H-3597 136 140 144 156Nut 1M-1408 136 140 144 156Master Bolt 3P-2274 4 4 4 4Special Sets/GroupsPin and Bushing Group (38 Sections) 1V-8623 1 1 1 1

D4 SEALED TRACKONE PIECE MASTER LINK




Components of Link AssemblyTrack LinksRH Master (Full) 1 9K-0029LH Master (Full) 1 9K-0028RH Regular 34 9K-6629LH Regular 34 9K-6628Other ComponentsPin 34 9K-4060

4 Order 36 section 1V-7072 or 40 section 1V-7075 link assembly and remove appropriate number of sections.5 Order 36 section 1V-7072 or 40 section 1V-7075 link assembly and add or remove appropriate number of sections.6 Not part of link assembly; required to assemble track group.7 If 35, 36, 37, 40 section link assemblies are required order 1V-7072 or 1V-7075 link assemblies and add or remove appropriate number of

sections.

312

D4D4 SEALED TRACKONE PIECE MASTER LINK24A, 29A, 30A, 39A, 40A, 54A, 55A, 69A, 78A, 85A, 86A, 91A, 22C, 97F, 44H, 47H, 20J, 49J, 60J, 61J, 66J, 82J, 83J, 84J, 7R, 69K, 6U, 7U,74U, 27X, 28X, 29X, 52X6.75" (171.5 mm) PITCH – 5/8" BOLT(Cont'd.)


Components of Link AssemblyMaster Pin 1 9K-4062Bushing 34 9K-4061Master Bushing 1 7K-2020Seal 140 7K-2018Spacer 2 9K-4059Track Hardware (8)

Bolt 140 7H-3597Nut 140 1M-1408Special Sets/GroupsPin and Bushing Group (38 Sections) 1 1V-8623

D4 TRACKLARGE O.D. BUSHING



Link Assembly – 36 Section 2 7K-2049 (9)

Components of Link AssemblyTrack LinksRH Regular 36 7K-1825LH Regular 36 7K-1826Other ComponentsPin 35 4B-6166Master Pin 1 4K-3919Bushing 35 7K-2019Master Bushing 1 7K-2020Seal (Sealed Track) 144 7K-2018Spacer 2 7K-2016Track Hardware (8)

Bolt 144 4K-7038Nut 144 7K-2017

7 If 35, 36, 37, 40 section link assemblies are required order 1V-7072 or 1V-7075 link assemblies and add or remove appropriate number ofsections.

8 Not part of link assembly; required to assemble track group.9 If 31, 32, 34, 35, 36 , 37, 40, section link assemblies are required, order 7K-2049 link assemblies and add or remove appropriate number of

sections.

313

D4D4 TRACK

SMALL O.D. BUSHING24A, 29A, 30A, 39A, 40A, 54A, 55A, 69A, 78A, 85A, 86A, 91A, 22C, 97F, 44H, 47H, 20J, 49J, 60J, 61J, 66J, 82J, 83J, 84J, 7R, 69K, 6U, 7U,



Components of Link AssemblyTrack LinksRH Regular 36 5K-9457LH Regular 36 5K-9458Other ComponentsPin 35 4B-6166Master Pin 1 4K-3919Bushing 35 4K-3918Master Bushing 1 4M-0740Seal (Sealed Track) 144 5K-2707Spacer 2 4K-3916Track Hardware (11)

Bolt 144 4K-7038Nut 144 7K-2017

D4 TRACK24A, 29A, 30A, 39A, 40A, 54A, 55A, 69A, 78A, 85A, 86A, 91A, 22C, 97F, 44H, 47H, 20J, 49J, 60J, 61J, 66J, 82J, 83J, 84J, 7R, 69K, 6U, 7U,


QUANTITY PART NUMBERLink Assembly – 36 Section 2 4K-7128 (12)

Components of Link AssemblyTrack LinksRH Regular 36 5K-9423LH Regular 36 5K-9424Other ComponentsPin 35 4B-6166Master Pin 1 4K-3919Bushing 35 4K-3918Master Bushing 1 4M-0740Seal 144 5K-2707Spacer 2 4K-3916Track Hardware (11)

10 If 31, 32, 34, 35, 36 , 37, 40, section link assemblies are required, upgrade to 7K-2049 or 7K-2051 link assemblies and add or remove appro-priate number of sections.

11 Not part of link assembly; required to assemble track group.12 . If 31, 32, 34, 35, 36 , 37, 40, section link assemblies are required, order 4K-7128 link assemblies and add or remove appropriate number

of sections.

314

D4D4 TRACK24A, 29A, 30A, 39A, 40A, 54A, 55A, 69A, 78A, 85A, 86A, 91A, 22C, 97F, 44H, 47H, 20J, 49J, 60J, 61J, 66J, 82J, 83J, 84J, 7R, 69K, 6U, 7U,74U, 27X, 28X, 29X, 52X6.75" (171.5 mm) PITCH – 1/2" BOLT(Cont'd.)

QUANTITY PART NUMBERLink Assembly – 36 Section 2 4K-7128 (12)

Components of Link AssemblyBolt 144 8H-7504Nut 144 8H-5724

D4 TRACK SHOES6.75" (171.5 mm) PITCH – 5/8" BOLT



Extreme Service 20.0" (510 mm) 2V-3819 5V-2906Extreme Service 24.0" (610 mm) 1V-7069 –

Moderate Service 13.0" (330 mm) 206-3507 206-3515Moderate Service 16.0" (405 mm) 206-3509 206-3517Moderate Service 18.0" (460 mm) 206-3510 206-3518Moderate Service 20.0" (510 mm) 206-3511 206-3519Moderate Service 24.0" (610 mm) 206-3512 206-3520Double Grouser 14.0" (355 mm) 8E-4805 6I-8780Double Grouser 13.0" (330 mm) 8E-4807 8E-4808Moderate Service 30.0" (760 mm) 206-3514 206-3522Double Grouser 18.0" (460 mm) 8E-4799 8E-4800Triple Grouser 14.0" (355 mm) 9G-6396 6I-8780 (13)

Self Cleaning 30.0" (760 mm) 1V-5092 1V-5090


TYPE WIDTH PART NUMBERModerate Service 18.0" (460 mm) 206-3505Moderate Service 16.0" (405 mm) 206-3504Moderate Service 20.0" (510 mm) 206-3506Triple Grouser 13.0" (330 mm) 5K-8566Triple Grouser 14.0" (355 mm) 7K-1548Self Cleaning 30.0" (760 mm) 1V-5091

12 . If 31, 32, 34, 35, 36 , 37, 40, section link assemblies are required, order 4K-7128 link assemblies and add or remove appropriate numberof sections.

13 Double Grouser Master - Trim grouser to match triple grouser height.

315

D4D4 TRACK SHOES

6.75" (171.5 mm) PITCH – 1/2" BOLT

TYPE WIDTH PART NUMBERModerate Service 16.0" (405 mm) 206-3502Rubber 13.0" (330 mm) 5F-3926 (14)

D4 SPROCKETS67A, 78A, 85A, 86A, 88A, 22C, 44H, 69K, 7R, 18J, 20J, 49J, 58J, 69J, 60J, 61J, 65J, 82J, 83J

6.75" (171.5 mm) PITCH

(PER SIDE) QUANTITY PART NUMBERSprocket Assembly (29 Tooth) 1 4V-4106Rim (Weld-On) (29 Tooth) 1 4V-4107

D4 SPROCKETS24A, 55A, 78A, 86A, 88A6.75" (171.5 mm) PITCH

(PER SIDE) QUANTITY PART NUMBERSprocket Assembly (29 Tooth) 1 5V-3842Rim (Weld-On) (29 Tooth) 1 4V-4107

D4 SPROCKETS2T, 5T, 6U, 7U, 12A, 26A, 29A, 30A

6.75" (171.5 mm) PITCH

(PER SIDE) QUANTITY PART NUMBERRim (Weld-On) (27 Tooth) 1 5H-9107

D4 IDLERSSTRAIGHT SHAFT, 9K BLOCKS

67A, 78A, 85A, 86A, 88A, 91A, 22C, 97F, 44H, 47H, 18J, 20J, 49J, 58J, 59J, 60J, 61J, 65J, 66J, 82J, 83J, 84J, 69K

(PER MACHINE) QUANTITY PART NUMBERIdler Assembly (Large O.D.) – (15) 1M-8867

Idler Assembly (Small O.D.) – (15) 3K-2866Other Components (Per Idler)Bushing Assembly 2 1V-9611Bearing (16) 1 7K-1089Shaft 1 8E-7899Bearing Block 1 9K-8857Bearing Block 1 9K-9113Seal – Duo-Cone Group 2 9W-5224Toric Ring (16) 2 1M-3097

14 Requires 3B-2182 Adapter.15 Either 2 large or small O.D. idlers required per machine.16 Component of preceding group; quantity shown is the quantity per group.

316

D4D4 IDLERSSTRAIGHT SHAFT, 9K BLOCKS67A, 78A, 85A, 86A, 88A, 91A, 22C, 97F, 44H, 47H, 18J, 20J, 49J, 58J, 59J, 60J, 61J, 65J, 66J, 82J, 83J, 84J, 69K(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERIdler Assembly (Large O.D.) – (15) 1M-8867

Idler Assembly (Small O.D.) – (15) 3K-2866Seal – Bushing O-Ring 2 1H-8128Seal – Shaft O-Ring 2 7F-8267Bolt 24 1A-2029Washer 24 3B-4506Plug 1 6Y-0473Stopper 1 7G-4332Lock 1 5M-5000Bolt 1 0T-0772Washer 1 4K-9943Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 5K-6191Toric Ring (17) 2 2S-2181

D4 IDLERSSTEPPED SHAFT, 4K BLOCKS

67A, 78A, 85A, 86A, 88A, 91A, 22C, 97F, 44H, 47H, 18J, 20J, 49J, 58J, 59J, 60J, 61J, 65J, 66J, 82J, 83J, 84J, 69K

(PER MACHINE) QUANTITY PART NUMBERIdler Assembly (Large O.D.) – (15) 1M-8867

Idler Assembly (Small O.D.) – (15) 3K-2866Other Components (Per Idler)Bushing Assembly 2 1V-9611Bearing (18) 1 7K-1089Shaft 1 4K-9984Bearing Block 1 4K-5285Bearing Block 1 4K-5286Seal – Duo-Cone Group 2 9W-5224Toric Ring (18) 2 1M-3097Seal – Bushing O-Ring 2 1H-8128Seal – Shaft O-Ring 2 4F-7952Seal – Plug 1 1S-8947Bolt 24 0S-1588Washer 24 3B-4506Plug 1 2P-0347

15 Either 2 large or small O.D. idlers required per machine.17 Component of preceding group; quantity shown is the quantity per group.18 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

317

D4D4 IDLERSSTEPPED SHAFT, 4K BLOCKS67A, 78A, 85A, 86A, 88A, 91A, 22C, 97F, 44H, 47H, 18J, 20J, 49J, 58J, 59J, 60J, 61J, 65J, 66J, 82J, 83J, 84J, 69K(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERIdler Assembly (Large O.D.) – (18) 1M-8867

Idler Assembly (Small O.D.) – (18) 3K-2866Lock 1 5M-5000Bolt 1 0T-0772Washer 1 4K-9943Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 5K-6191Toric Ring (19) 2 2S-2181

D4 IDLERSSTEPPED SHAFT, 1M BLOCKS

6U, 7U, 59J, 44H, 60J, 82J, 83J, 84J, 27X, 28X, 29X

(PER MACHINE) QUANTITY PART NUMBERIdler Assembly (Large O.D.) – (18) –

Idler Assembly (Small O.D.) – (18) –

Other Components (Per Idler)Bushing Assembly 2 1V-9611Bearing (19) 1 7K-1089Shaft 1 3K-6620Bearing Block 1 1M-8863Bearing Block 1 1M-8864Seal – Duo-Cone Group 2 9W-5224Toric Ring (19) 2 1M-3097Seal – Bushing O-Ring 2 1H-8128Seal – Shaft O-Ring 2 4F-7952Seal – Plug 1 1S-8947Bolt 24 0S-1588Washer 24 3B-4506Plug 1 2P-0347Lock 1 5M-5000Bolt 1 0T-0772Washer 1 4K-9943Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 5K-6191Toric Ring (19) 2 2S-2181

18 Either 2 large or small O.D. idlers required per machine.19 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

318

D4D4 IDLERS

STEPPED SHAFT, 2M BLOCKS29A, 30A, 6U, 7U

(PER MACHINE) QUANTITY PART NUMBERIdler Assembly (Large O.D.) – (20) –

Idler Assembly (Small O.D.) – (20) –

Other Components (Per Idler)Bushing Assembly 2 1V-9611Bearing (21) 1 7K-1089Shaft 1 3K-6620Bearing Block 1 2M-6007Bearing Block 1 2M-6008Seal – Duo-Cone Group 2 9W-5224Toric Ring (21) 2 1M-3097Seal – Bushing O-Ring 2 1H-8128Seal – Shaft O-Ring 2 4F-7952Seal – Plug 1 1S-8947Bolt 24 0S-1588Washer 24 3B-4506Plug 1 2P-0347Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 5K-6191Toric Ring (21) 2 2S-2181

D4 CARRIER ROLLERS24A, 29A, 30A, 39A, 40A, 54A, 55A, 69A, 78A, 85A, 86A, 91A, 22C, 97F, 44H, 47H,20J, 49J, 60J, 61J, 66J, 82J, 83J, 84J, 7R, 69K, 6U, 7U, 74U, 27X, 28X, 29X, 52X

(PER MACHINE) QUANTITY PART NUMBERGroup 2 6K-9880Components of GroupRoller Shell 1 9W-6174Shaft 1 6K-9861Plate 1 6K-9860Bolt 2 6V-4791Cup 2 1M-8736Cone 2 1M-8735Ring 1 1M-7914Cover 1 3K-6638Collar Assembly 1 1M-7918Plug 1 2P-0347Bolt 3 0L-1351

20 Either 2 large or small O.D. idlers required per machine.21 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

319

D4D4 CARRIER ROLLERS24A, 29A, 30A, 39A, 40A, 54A, 55A, 69A, 78A, 85A, 86A, 91A, 22C, 97F, 44H, 47H,20J, 49J, 60J, 61J, 66J, 82J, 83J, 84J, 7R, 69K, 6U, 7U,74U, 27X, 28X, 29X, 52X(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERGroup 2 6K-9880Seal – Duo-Cone Group 1 9W-5224Toric Ring (22) 2 1M-3097Seal – Cover 1 5H-8848Seal – Plug 1 1S-8947Seal – Shaft O-Ring 1 1H-9696Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 1 5K-6191Toric Ring (22) 1 2S-2181

D4 TRACK ROLLERS24A, 29A, 30A, 39A, 40A, 54A, 55A, 69A, 78A, 85A, 86A, 91A, 22C, 97F, 44H, 47H,20J, 49J, 60J, 61J, 66J, 82J, 83J, 84J, 7R, 69K, 6U, 7U, 74U, 27X, 28X, 29X, 52X



Components of GroupRoller Shell (DF) 1 9P-7786Roller Shell (SF) 1 9P-7782Bushing Assembly 2 1V-9611Bushing Assembly (.040" Oversize) 2 7K-1089Shaft 1 118-1610 (23)

End Collar 2 118-1616 (24)

Ring 2 6H-7382Bolt 12 2P-3201Seal – Duo-Cone Group 2 9W-5224Toric Ring (25) 2 1M-3097Seal – Bushing O-Ring 2 1H-8128Seal – Shaft O-Ring 2 7F-8267Stopper 1 7G-4332Plug 1 6Y-0473Mounting Hardware (26)

Bolt 4 1A-1135Washer 4 5P-8247

22 Component of preceding group; quantity shown is the quantity per group.23 Replaces former 3K-6616 shaft; requires 2 – 118-1616 end collars.24 If 3K-6616 shaft is used, use 2 – 5K-7187 end collars.25 Component of preceding assembly or group; quantity shown is per assembly or group.26 These components are not included in the roller group; quantities shown are required to mount each roller.

320

D4D4 TRACK ROLLERS24A, 29A, 30A, 39A, 40A, 54A, 55A, 69A, 78A, 85A, 86A, 91A, 22C, 97F, 44H, 47H,20J, 49J, 60J, 61J, 66J, 82J, 83J, 84J, 7R, 69K, 6U, 7U,74U, 27X, 28X, 29X, 52X(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERDouble Flange (DF) 6 118-1609


Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 5K-6191Toric Ring (27) 2 2S-2181Seal – Bushing O-Ring 2 5K-1770Seal – Shaft O-Ring 2 8M-5661

D4 END GUIDING GUARDS18J, 61J, 66J, 67J, 82J, 7R, 27X, 28X, 29X, 84J850-UP

(PER MACHINE) QUANTITY PART NUMBERFront (Outer LH, Inner RH)Guard Assembly 1 7K-2944Wear Strip 1 5V-3875Bolt 4 031-0221Front (Outer RH, Inner LH)Guard Assembly 1 7K-2943Wear Strip 1 5V-3875Bolt 4 031-0221Rear (Outer RH)Guard Assembly 1 7K-2961Wear Strip 1 5V-3876Bolt 4 031-0221Rear (Outer LH)Guard Assembly 1 7K-2962Wear Strip 1 5V-3876Bolt 4 031-0221

D4 END GUIDING GUARDS39A, 40A, 78A, 22C, 20J, 83J, 84J1-849

(PER MACHINE) QUANTITY PART NUMBERFront (Outer LH, Inner RH)Guard Assembly 1 5K-7128Front (Outer RH, Inner LH)Guard Assembly 1 5K-7129Rear (Outer RH)

27 Component of preceding assembly or group; quantity shown is per assembly or group.

321

D4D4 END GUIDING GUARDS39A, 40A, 78A, 22C, 20J, 83J, 84J1-849(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 1 5K-7141Rear (Outer LH)Guard Assembly 1 5K-7142

D4 TRACK ROLLER GUARDSFULL LENGTH

39A, 40A, 78A, 22C, 20J, 82J, 83J, 84J

(PER MACHINE) QUANTITY PART NUMBERGuard AssemblyInner RH 1 1M-7795Inner LH 1 1M-7796Outer RH 1 1M-7749Outer LH 1 1M-7750Bolt 34 0S-1594Washer 34 3B-4510Pipe 6 3V-7851Nut 6 6B-6682Washer 12 3B-4512

D4 TRACK ROLLER GUARDSPARTIAL

18J, 61J, 66J, 67J, 7R

(PER MACHINE) QUANTITY PART NUMBERGuard AssemblyInner RH 1 1V-4268Inner LH 1 1V-4266Outer RH 1 1V-4269Outer LH 1 1V-4267Bolt 10 5K-7144Nut 10 7B-1756Spacer 10 5K-7247Bolt 24 5K-7138Retainer 6 4K-7348Bolt 12 5K-7143Washer 12 4B-4280

322

D4D4 TRACK ROLLER GUARDS

PARTIAL39A, 40A, 78A, 22C, 20J, 82J, 83J, 84J

(PER MACHINE) QUANTITY PART NUMBERGuard AssemblyInner RH 1 5K-7315Inner LH 1 5K-7316Outer RH 1 5K-7305Outer LH 1 5K-7306Bolt 10 5K-7144Nut 10 7B-1756Spacer 10 5K-7247Bolt 20 5K-7138Retainer 6 4K-7348Bolt 12 5K-7143Washer 12 4B-4280

D4 CENTER GUIDING GUARDS(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 1 7K-4438Wear Strip 2 7V-3687Bolt 4 6K-0137Lock Washer 4 4D-3704Bolt 8 031-0221Spacer 4 9M-7783

323

D5, 561D5 SEALED AND LUBRICATED TRACK

SPLIT MASTER LINKS, CURRENT MODEL51H, 52H, 81H, 82H, 83H, 84H, 21J, 37J, 54J, 62J, 63J, 67J, 93J, 94J, 95J, 96J, 97J, 98J, 22X,23X, 24X, 25X, 26X, 43X, 44X, 45X, 46X, 47X, 48X, 49X, 54X, 9RG, 21Y, 8MB, 12R, 6R, 68J


NUMBER 38 Section 39 Section 43 Section 46 SectionLink Assembly – (2 Quantity) – (1) 154-3672 – (1) 154-3676Components of Link AssemblyTrack LinksRH Pin End Master 3P-3043 1 1 1 1LH Pin End Master 3P-3044 1 1 1 1RH Bushing End Master 3P-3045 1 1 1 1LH Bushing End Master 3P-3046 1 1 1 1RH Regular 3P-7153 37 38 42 45LH Regular 3P-7154 37 38 42 45Other ComponentsPin 160-7818 (2) 38 39 43 46Bushing 7T-4636 38 39 43 46Seal Assembly (Rigid) 250-3990 76 78 86 92Thrust Ring 3P-3878 76 78 86 92Stopper 5G-2247 38 39 43 46Plug 6Y-0473 38 39 43 46Track Hardware (3)

Bolt 7H-3597 148 152 168 180Nut 1M-1408 148 152 168 180Master Bolt 3P-2274 4 4 4 4Special Sets/GroupsBushing and Seal Group (46 Sections) 154-3659 1 1 1 1Seal Set (92 Seal Assemblies) 252-7859 1 1 1 1

D5 SEALED TRACKSPLIT MASTER LINKS, CURRENT MODEL

51H, 52H, 81H, 82H, 83H, 84H, 21J, 37J, 54J, 62J, 63J, 67J, 93J, 94J, 95J, 96J, 97J, 98J, 22X,23X, 24X, 25X, 26X, 43X, 44X, 45X, 46X, 47X, 48X, 49X, 54X, 9RG, 21Y, 8MB, 12R, 6R, 68J


NUMBER 38 Section 39 Section 43 Section 46 SectionLink Assembly – (2 Quantity) – (4) 3P-5757 – (4) 3P-5762Components of Link AssemblyTrack LinksRH Pin End Master 3P-3043 1 1 1 1LH Pin End Master 3P-3044 1 1 1 1

1 Order 154-3672 or 154-3676 link assemblies and add or remove appropriate number of sections.2 Former pin 3P-3880 (Use 9G-1642 stopper).3 Not part of link assembly; required to assemble track group.4 Order 3P-5757 or 3P-5762 link assemblies and add or remove appropriate number of sections.

324

D5, 561D5 SEALED TRACKSPLIT MASTER LINKS, CURRENT MODEL51H, 52H, 81H, 82H, 83H, 84H, 21J, 37J, 54J, 62J, 63J, 67J, 93J, 94J, 95J, 96J, 97J, 98J, 22X,23X, 24X, 25X, 26X, 43X, 44X, 45X, 46X, 47X,48X, 49X, 54X, 9RG, 21Y, 8MB, 12R, 6R, 68J6.91" (175.5 mm) PITCH – 5/8" BOLT(Cont'd.)

PARTNUMBER 38 Section 39 Section 43 Section 46 Section

Link Assembly – (2 Quantity) – (4) 3P-5757 – (4) 3P-5762Components of Link AssemblyRH Bushing End Master 3P-3045 1 1 1 1LH Bushing End Master 3P-3046 1 1 1 1RH Regular 3P-7153 37 38 42 45LH Regular 3P-7154 37 38 42 45Other ComponentsPin 6B-5502 38 39 43 46Bushing 5S-0710 38 39 43 46Seal 5S-0709 152 156 172 184Track Hardware (5)

Bolt 7H-3597 148 152 168 180Nut 1M-1408 148 152 168 180Master Bolt 3P-2274 4 4 4 4Special Sets/GroupsPin and Bushing Group (38 Sections) 6P-4234 1 1 1 1

D5 SEALED TRACKSEALED ONE PIECE MASTER LINKS, FORMER MODEL

51H, 52H, 81H, 82H, 83H, 84H, 21J, 37J, 54J, 62J, 63J, 67J, 93J, 94J, 95J, 96J, 97J, 98J, 22X,23X, 24X, 25X, 26X, 43X, 44X, 45X, 46X, 47X, 48X, 49X, 54X, 9RG, 21Y, 8MB, 12R, 6R, 68J


Link Assembly – 46 Section – – (6)

Components of Link AssemblyTrack LinksRH Master (Full) 1 3P-7155LH Master (Full) 1 3P-7156RH Regular 45 3P-7153LH Regular 45 3P-7154Other ComponentsPin 45 6B-5502Master Pin 1 8M-7456Bushing 45 5S-0710Master Bushing 1 5S-0753

4 Order 3P-5757 or 3P-5762 link assemblies and add or remove appropriate number of sections.5 Not part of link assembly; required to assemble track group.6 If 38, 39, 43, 46, section link assemblies are required, upgrade to 3P-5757 or 3P-5762 and add or remove appropriate number of sections.

325

D5, 561D5 SEALED TRACKSEALED ONE PIECE MASTER LINKS, FORMER MODEL51H, 52H, 81H, 82H, 83H, 84H, 21J, 37J, 54J, 62J, 63J, 67J, 93J, 94J, 95J, 96J, 97J, 98J, 22X,23X, 24X, 25X, 26X, 43X, 44X, 45X, 46X, 47X,48X, 49X, 54X, 9RG, 21Y, 8MB, 12R, 6R, 68J6.91" (175.5 mm) PITCH – 5/8" BOLT(Cont'd.)

QUANTITY PART NUMBERLink Assembly – 46 Section – – (6)

Components of Link AssemblySeal 184 5S-0709Spacer 2 5S-0754Track Hardware (7)

Bolt 184 7H-3597Nut 184 1M-1408Special Sets/GroupsPin and Bushing Group (38 Sections) 1 6P-4234

D5 EXTENDED WEAR LIFE TRACK*51H, 52H, 81H, 82H, 83H, 84H, 21J, 37J, 54J, 62J, 63J, 67J, 93J, 94J, 95J, 96J, 97J, 98J, 22X,23X, 24X, 25X, 26X, 43X, 44X, 45X, 46X, 47X, 48X, 49X, 54X, 9RG, 21Y, 8MB, 12R, 6R, 68J


Link Assembly – 39 Section 2 154-3662 (8)

Components of Link AssemblyTrack LinksRH Pin End Master 1 7T-4541LH Pin End Master 1 7T-4542RH Bushing End Master 1 7T-4543LH Bushing End Master 1 7T-4544RH Regular 38 7T-4539LH Regular 38 7T-4540Other ComponentsPin 39 160-7818 (9)

Bushing 39 7T-4636Seal Assembly (Rigid) 78 250-3990Thrust Ring 78 3P-3878Stopper 39 5G-2247Plug 39 6Y-0473Track Hardware (7)

Bolt 152 7H-3597Nut 152 1M-1408

6 If 38, 39, 43, 46, section link assemblies are required, upgrade to 3P-5757 or 3P-5762 and add or remove appropriate number of sections.7 Not part of link assembly; required to assemble track group.8 If 38, 43, 46, section link assemblies are required order 154-3662 and add or subract appropriate number of sections.9 Former pin 3P-3880 (Use 9G-1642 stopper).

326

D5, 561D5 EXTENDED WEAR LIFE TRACK*51H, 52H, 81H, 82H, 83H, 84H, 21J, 37J, 54J, 62J, 63J, 67J, 93J, 94J, 95J, 96J, 97J, 98J, 22X,23X, 24X, 25X, 26X, 43X, 44X, 45X, 46X, 47X,48X, 49X, 54X, 9RG, 21Y, 8MB, 12R, 6R, 68J6.91" (175.5 mm) PITCH – 5/8" BOLT(Cont'd.)


Components of Link AssemblyMaster Bolt 4 3P-2274Special Sets/GroupsBushing and Seal Group (46 Sections) 1 154-3659

Seal Set (92 Seal Assemblies) 1 252-7859

* Note: Extended Wear Life Link Assemblies require special rollers and idlers to match the high rail link; refer to roller and idler section for details.

561 SEALED TRACKSPLIT MASTER LINK, CURRENT MODEL

85H, 92J, 54X6.91" (175.5 mm) PITCH – 5/8" BOLT

QUANTITY PART NUMBERLink Assembly – 39 Section 2 3P-5757Components of Link AssemblyTrack LinksRH Pin End Master 1 3P-3043LH Pin End Master 1 3P-3044RH Bushing End Master 1 3P-3045LH Bushing End Master 1 3P-3046RH Regular 38 3P-7153LH Regular 38 3P-7154Other ComponentsPin 39 6B-5502Bushing 39 5S-0710Seal (Spring Washer) 156 5S-0709Track Hardware (10)

Bolt 152 7H-3597Nut 152 1M-1408Master Bolt 4 3P-2274Special Sets/GroupsPin and Bushing Group (38 Sections) 1 6P-4234

8 If 38, 43, 46, section link assemblies are required order 154-3662 and add or subract appropriate number of sections.10 Not part of link assembly; required to assemble track group.

327

D5, 561561 SEALED TRACK

ONE PIECE MASTER LINKS, FORMER MODEL85H, 92J, 54X



Components of Link AssemblyTrack LinksRH Master (Full) 1 3P-7155LH Master (Full) 1 3P-7156RH Regular 38 3P-7153LH Regular 38 3P-7154Other ComponentsPin 38 6B-5502Master Pin 1 8M-7456Bushing 38 5S-0710Master Bushing 1 5S-0753Seal (Spring Washer) 156 5S-0709Spacer 2 5S-0754Track Hardware (12)


561 SEALED TRACK62A

6.75" (171.5 mm) PITCH - 5/8" BOLT

QUANTITY PART NUMBERLink Assembly – 40 Section 2 2S-7579Components of Link AssemblyTrack LinksRH Regular 40 2S-5959LH Regular 40 2S-5960Other ComponentsPin 39 6B-5502Master Pin 1 8M-7456Bushing 39 8M-7457Master Bushing 1 2A-3241Seal (Spring Washer) 160 8M-7454Spacer 2 8M-7455Track Hardware (12)

11 Upgrade to 3P-5757 link assembly.12 Not part of link assembly; required to assemble track group.

328

D5, 561561 SEALED TRACK62A6.75" (171.5 mm) PITCH - 5/8" BOLT(Cont'd.)

QUANTITY PART NUMBERLink Assembly – 40 Section 2 2S-7579Components of Link AssemblyBolt 160 7H-3597Nut 160 1M-1408

D5, 561 TRACK SHOES6.91" (175.5 mm) PITCH – 5/8" BOLT



Moderate Service 18.0" (460 mm) 175-8020 175-8021Moderate Service 20.0" (510 mm) 175-8365 175-8366Moderate Service 22.0" (560 mm) 175-8367 175-8368Moderate Service 24.0" (610 mm) 175-8673 175-8674Moderate Service 34.0" (865 mm) 175-8022 175-8023Double Grouser 15.0" (380 mm) 8E-4724 8E-4725Double Grouser 19.7" (500 mm) 8E-4722 8E-4723Triple Grouser 15.0" (380 mm) 175-8553 8E-4725 (13)

D5, 561 SPROCKETS51H, 52H, 81H, 82H, 83H, 84H, 21J, 37J, 54J, 62J, 63J, 67J, 93J, 94J, 95J, 96J, 97J, 98J, 22X, 23X,24X, 25X, 26X, 43X, 44X, 45X, 46X, 47X, 48X, 49X, 54X, 9RG, 21Y, 8MB, 12R, 6R, 68J, 85H, 92J

(PER SIDE) QUANTITY PART NUMBERSprocket Hub 1 5S-0726 (14)

Sprocket Segment (Tough Steel) (3 Tooth) 9 187-4845Sprocket Segment (3 Tooth) 9 185-6151Mud/Snow Segment 9 8P-9453Adapter Ring 1 5S-0834Rim 1 5S-4822Bolt 27 3S-8182Nut 27 7H-3607

561 SPROCKET62A

6.75" (171.5 mm) - PITCH

(PER SIDE) QUANTITY PART NUMBERSprocket Assembly ( 28 Tooth) 1 8M-6041Rim ( 28 Tooth) 1 3H-2643

13 Double Grouser Master (Non Center Punched).14 Optional Classic service replacement 227-4769.

329

D5, 561D5, 561 IDLERS

LARGE O.D.51H, 52H, 81H, 82H, 83H, 84H, 37J, 54J, 62J, 63J, 67J, 93J, 94J, 95J, 96J, 97J, 22X, 23X,24X, 25X, 43X, 44X, 45X, 46X, 47X, 48X, 49X, 54X, 9RG, 8MB, 12R, 6R, 68J, 62A, 85H, 92J

(PER MACHINE) QUANTITY PART NUMBERIdler Assembly 2 8S-2560 (15)

Extended Wear Idler Assembly (16) 2 7T-3501Other ComponentsBushing Assembly 2 3P-8272Bearing (17) 1 8P-6652Shaft 1 5K-0305Bearing Block 1 9G-8300Bearing Block 1 9G-8301Seal – Duo-Cone Group 2 9W-5224Toric Ring (17) 2 1M-3097Seal – Bushing O-Ring 2 1H-6227Seal – Shaft O-Ring 2 7F-8267Seal – Plug 1 1S-8947Bolt 12 0S-1588Washer 12 3B-4506Plug 1 2P-0347Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 5K-6191Toric Ring (17) 2 2S-2181Seal – Bushing O-Ring 2 2S-2182Seal – Shaft O-Ring 2 8M-5661

D5 IDLERSSMALL O.D.

21J, 98J, 26X, 21Y

(PER MACHINE) QUANTITY PART NUMBERIdler Assembly 2 1M-3121Other ComponentsBushing Assembly 2 3P-8272Bearing (17) 1 8P-6652Shaft 1 5K-0305Bearing Block 1 3T-4427Bearing Block 1 3T-4428Seal – Duo-Cone Group 2 9W-5224Toric Ring (17) 2 1M-3097

15 Serviced Replaced By - 7T-3501.16 For use with Extended Wear Life Track17 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

330

D5, 561D5 IDLERSSMALL O.D.21J, 98J, 26X, 21Y(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERIdler Assembly 2 1M-3121Seal – Bushing O-Ring 2 1H-6227Seal – Shaft O-Ring 2 7F-8267Seal – Plug 1 1S-8947Bolt 12 0S-1588Washer 12 3B-4506Plug 1 2P-0347Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 5K-6191Toric Ring (18) 2 2S-2181Seal – Bushing O-Ring 2 2S-2182Seal – Shaft O-Ring 2 8M-5661

D5, 561 IDLERSEARLY MODELS

21J, 62J, 63J, 93J, 94J, 95J, 96J, 98J, 51H, 52H, 81H, 82H, 83H, 84H, 37J, 54J, 67J, 97J, 12R, 6R, 68J, 62A, 85H, 92J

(PER MACHINE) QUANTITY PART NUMBERIdler AssemblyLarge Diameter 2 8S-2560 (19)

Small Diameter 2 1M-3121Other ComponentsBushing Assembly 2 3P-8272Bearing (18) 1 8P-6652Shaft 1 5M-1913 (20)

Bearing 2 1P-1578Seal – Duo-Cone Group 2 9W-5224Toric Ring (18) 2 1M-3097Seal – Bushing O-Ring 2 1H-6227Seal – Shaft O-Ring 2 7F-8267Seal – Plug 1 1S-8947Bolt 12 0S-1588Washer 12 3B-4506Plug 1 2P-0347Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 5K-6191

18 Component of preceding assembly or group; quantity shown is quantity per assembly or group.19 Serviced Replaced By - 7T-3501.20 1P-1555 Shaft used on D5 idler with 1P1554 and 1P1582 bearing blocks.

331

D5, 561D5, 561 IDLERSEARLY MODELS21J, 62J, 63J, 93J, 94J, 95J, 96J, 98J, 51H, 52H, 81H, 82H, 83H, 84H, 37J, 54J, 67J, 97J, 12R, 6R, 68J, 62A, 85H, 92J(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERIdler AssemblyToric Ring (21) 2 2S-2181Seal – Bushing O-Ring 2 2S-2182Seal – Shaft O-Ring 2 8M-5661

D5, 561 CARRIER ROLLERS51H, 52H, 81H, 82H, 83H, 84H, 21J, 37J, 54J, 62J, 63J, 67J, 93J, 94J, 95J, 96J, 97J, 98J, 22X, 23X, 24X,

25X, 26X, 43X, 44X, 45X, 46X, , 47X, 48X, 49X, 54X, 9RG, 21Y, 8MB, 12R, 6R, 68J, 62A, 85H, 92J

(PER MACHINE) QUANTITY FORMER PART NUMBER PART NUMBERGroup 4 – (22) 5A-8374Components of GroupRoller Shell 1 2S-0205 5A-8375Shaft 1 5M-1914 3T-3207Cup 2 1M-7911 9S-3581Cone 2 1M-7912 9S-3582Ring 1 1M-7914 1M-7914Cover 1 5M-2043 5M-2043Collar 1 1M-7918 9S-3567Support 1 1M-7915 –

Plug 1 2P-0347 2P-0347Bolt 3 0S-1594 0S-1594Ring 1 1M-7916 –

Nut 1 1M-7913 –Plate 1 – 8P-6188Bolt 2 – 5K-9107Seal – Duo-Cone Group 1 9W-5224 6Y-0925Toric Ring (23) 2 1M-3097 8H-2262Seal – Cover 1 2H-6338 2H-6338Seal – Support 1 4H-9105 –

Seal – Plug 1 1S-8947 1S-8947Seal – Shaft O-Ring 1 1H-9696 1H-9696Special Application SealsSeal – Duo-Cone Group (Steel Mill) 2 5K-6191 4S-8984Toric Ring (23) 2 2S-2181 9M-9730

21 Component of preceding assembly or group; quantity shown is quantity per assembly or group.22 Upgrade to 5A-8374 group.23 Component of preceding group; quantity shown is the quantity per group.

332

D5, 561D5, 561 TRACK ROLLERS

51H, 52H, 81H, 82H, 83H, 84H, 21J, 37J, 54J, 62J, 63J, 67J, 93J, 94J, 95J, 96J, 97J, 98J, 22X, 23X,24X, 25X, 26X, 43X, 44X, 45X, 46X, 47X, 48X, 49X, 54X, 9RG, 21Y, 8MB, 12R, 6R, 68J, 85H, 92J, 62A



Components of GroupRoller Shell (DF) 1 9S-9534 (25)

Roller Shell (SF) 1 9S-9535 (26)

Extended Wear Life Shell (DF) (27) 1 9W-8350Extended Wear Life Shell (SF) (27) 1 9W-8353Bushing Assembly 2 2P-8045Bearing (28) 1 8P-6652Shaft 1 118-1613 (29)

End Collar 2 5M-0627 (30)


Bolt 4 8S-9092 (32)

Washer 4 5P-8247Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 5K-6191Toric Ring (28) 2 2S-2181Seal – Bushing O-Ring 2 2S-2182Seal – Shaft O-Ring 2 8M-5661

24 8 Double Flange Rollers required on LGP machines.25 Serviced Replaced By: 1 - Roller Group (DF) 310-4915, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247.26 Serviced Replaced By: 1 - Roller Group (SF) 310-4912, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247.27 For use with Extended Wear Life Track28 Component of preceding assembly or group; quantity shown is per assembly or group.29 Replaces former 5M-1915 shaft; requires 2 – 5M-0627 end collars.30 If 5M-1915 shaft is used, use 1 – 5M-0627 and 1 – 1M-3812 end collar.31 These components are not included in the roller group; quantities shown are required to mount each roller.32 Use 0S-1601 Bolt for serial numbers 95J1-472, 96J1-6031, 93J, 94J

333

D5, 561D5, 561 END GUIDING GUARDS

92J, 93J , 94J, 95J, 96J 97J, 98J, 12R, 6R, 68J, 23X 24X, 25X, 26X, 43X, 44X, 45X, 46X, 47X, 48X, 49X, 54X, 62J, 63J, 67J, 8MB, 21Y

(PER MACHINE) QUANTITY PART NUMBERFront (Outer LH, Inner RH)Guard Assembly 1 9S-8359 (33)

Wear Strip 1 9S-8354 (34)

Bolt 4 7B-3235Lock Washer 4 3B-4508Front (Outer RH, Inner LH)Guard Assembly 1 9S-8358 (35)


Bolt 4 7B-3235Lock Washer 4 3B-4508Rear (Outer RH)Guard Assembly 1 9S-8258 (37)


Bolt 4 7B-3235Lock Washer 4 3B-4508Rear (Outer LH)Guard Assembly 1 9S-8257 (39)


Bolt 4 7B-3235Lock Washer 4 3B-4508

D5, 561 END GUIDING GUARDS6R, 12R, 68J

(PER MACHINE) QUANTITY PART NUMBERFront (Outer LH, Inner RH)Guard Assembly 1 3K-4222Front (Outer RH, Inner LH)Guard Assembly 1 3K-4221

33 Optional Classic service replacement 226-4857.34 Optional Classic service replacement 226-4855.35 Optional Classic service replacement 226-4856.36 Optional Classic service replacement 226-4854.37 Optional Classic service replacement 226-0239.38 Optional Classic service replacement 226-0243.39 Optional Classic service replacement 226-0238.40 Optional Classic service replacement 226-0244.

334

D5, 561D5 TRACK ROLLER GUARDS

FULL LENGTH81H, 82H, 83H, 84H, 37J, 21J, 93J, 51H, 52H

(PER MACHINE) QUANTITY PART NUMBERGuard AssemblyInner RH 1 7B-7889Inner LH 1 7B-7890Outer RH 1 7B-7891Outer LH 1 7B-7892Bolt 34 1A-8537Washer 34 4D-3704Spacer 34 3P-4134

D5, 561 TRACK ROLLER GUARDSPARTIAL

81H, 82H, 83H, 84H, 85H, 12R, 6R, 68J, 92J, 93J, 94J, 95J, 96J, 97J, 6X, 49X286-UP,62J, 63J, 67J, 22X, 23X, 24X, 25X, 43X, 44X, 47X, 48X, 62A, 8MB, 54X, 51H, 52H

(PER MACHINE) QUANTITY PART NUMBERGuard AssemblyInner RH 1 5M-0633Inner LH 1 5M-0634Outer RH 1 5M-0635Outer LH 1 5M-0636Bolt 32 1B-4367Washer 32 4D-3704Spacer 32 3P-4134Bolt 2 1A-1135Lock Washer 2 3B-4510Tube 6 2F-0023Rod Assembly 6 –

Nut 6 1B-4206Lock Washer 12 3B-4510

D5 CENTER GUIDING GUARDS12R, 6R, 68J, 46X

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 1 5S-6513 (41)

Wear Strip 2 3V-1133Bolt 8 6H-1717Lock Washer 8 3B-4508Bolt 4 1D-4585Washer 4 4D-3704

41 Optional Classic service replacement 226-4938.

335

D5, 561D5, 561 FINAL DRIVE GUARDS

51H, 52H, 81H, 82H, 83H, 84H, 85H, 62J, 63J, 67J, 92J, 93J, 94J, 95J, 96J, 23X, 25X, 43X, 44X, 45X, 47X, 49X, 54X

(PER MACHINE) QUANTITY PART NUMBERGuard (RH) 1 7S-8214 (42)

Guard (LH) 1 7S-8213 (43)

Bolts 8 0V-0375Washer 8 2M-0849

42 Optional Classic service replacement 226-4944.43 Optional Classic service replacement 226-4943.

336

D6D6 SEALED AND LUBRICATED TRACK

HYBRID, SPLIT MASTER LINKS10K, 26K, 23U, 24U, 74W, 75W, 1Y, 3X, 4X, 5X, 6X, 19X, 20X, 69U, 41A,71A, 73A, 74A, 76A, 82A, 83A, 96A, 46J, 47J, 55J, 69J, 99J, 2MJ, 8FJ


NUMBER 36 SECTION 39 SECTION 41 SECTIONLink Assembly (Quantity 2) 236-9861 236-9864 236-9866Components of Link AssemblyTrack LinksRH Pin End Master 228-2737 1 1 1LH Pin End Master 228-2738 1 1 1RH Bushing End Master 228-2739 1 1 1LH Bushing End Master 228-2740 1 1 1RH Regular 228-2735 35 38 40LH Regular 228-2736 35 38 41Other ComponentsPin 160-7819 (1) 36 39 41Bushing 230-4512 36 39 41Seal Assembly (Rigid) 207-0544 72 78 82Thrust Ring 152-8071 72 78 82Stopper 5G-2247 36 39 41Plug 6Y-0473 36 39 41Track Hardware (2)

Bolt 1S-1859 140 152 160Nut 1S-1860 140 152 160Master Bolt 9S-1838 4 4 4Special Sets/GroupsSeal Set (90 Seal Assemblies) 256-9360 1 1 1Bushing and Seal Group (37 Sections) 293-9147 1 1 1

D6 SEALED AND LUBRICATED TRACKFORMER SEALED AND LUBRICATED TRACK, SPLIT MASTER LINKS

10K, 26K, 23U, 24U, 74W, 75W, 1Y, 3X, 4X, 5X, 6X, 19X, 20X, 69U, 41A, 71A, 73A,74A, 76A, 82A, 83A, 96A, 46J, 47J, 55J, 69J, 99J, 2MJ, 8FJ, BWJ, C6G, 3SR


NUMBER 36 SECTION 39 SECTION 41 SECTIONLink Assembly (Quantity 2) 180-0507 (3) 117-1020 (4) 180-0509 (5)

Components of Link AssemblyTrack LinksRH Pin End Master 6Y-6743 1 1 1

1 Former pin 3P-1108 (Use 9G-1642 Stopper).2 Not part of link assembly; required to assemble track group.3 Service replaced by 236-9861 hybrid link assembly.4 Service replaced by 236-9864 hybrid link assembly.5 Service replaced by 236-9866 hybrid link assembly.

337

D6D6 SEALED AND LUBRICATED TRACKFORMER SEALED AND LUBRICATED TRACK, SPLIT MASTER LINKS10K, 26K, 23U, 24U, 74W, 75W, 1Y, 3X, 4X, 5X, 6X, 19X, 20X, 69U, 41A, 71A, 73A,74A, 76A, 82A, 83A, 96A, 46J, 47J, 55J, 69J, 99J, 2MJ,8FJ, BWJ, C6G, 3SR8.00" (203.2 mm) PITCH – 3/4" BOLT(Cont'd.)

PARTNUMBER 36 SECTION 39 SECTION 41 SECTION

Link Assembly (Quantity 2) 180-0507 (3) 117-1020 (4) 180-0509 (5)

LH Pin End Master 6Y-6744 1 1 1RH Bushing End Master 6Y-6745 1 1 1LH Bushing End Master 6Y-6746 1 1 1RH Regular 3P-1112 35 38 40LH Regular 3P-1113 35 38 41Other ComponentsPin 160-7819 (6) 36 39 41Bushing 8E-5257 (7) 36 39 41Seal Assembly (Rigid) 250-3996 72 78 82Thrust Ring 3P-1104 72 78 82Stopper 5G-2247 36 39 41Plug 6Y-0473 36 39 41Track Hardware (8)

Bolt 1S-1859 140 152 160Nut 1S-1860 140 152 160Master Bolt 9S-1838 4 4 4Special Sets/GroupsBushing and Seal Group (36 Sections) 6I-8061 1 1 1

Seal Set (86 Seal Assemblies) 252-7857 1 1 1

D6 SEALED TRACKHYBRID SPLIT MASTER LINKS

10K, 26K, 23U, 24U, 74W, 75W, 1Y, 3X, 4X, 5X, 6X, 19X, 20X, 69U, 41A,71A, 73A, 74A, 76A, 82A, 83A, 96A, 46J, 47J, 55J, 69J, 99J, 2MJ, 8FJ


Link Assembly (Quantity 2) 238-9951 238-9954Components of Link AssemblyTrack LinksRH Pin End Master 228-2737 1 1LH Pin End Master 228-2738 1 1RH Bushing End Master 228-2739 1 1

3 Service replaced by 236-9861 hybrid link assembly.4 Service replaced by 236-9864 hybrid link assembly.5 Service replaced by 236-9866 hybrid link assembly.6 Former pin 3P-1108 (Use 9G-1642 Stopper).7 If small O.D. bushing is required, use 3P-1109.8 Not part of link assembly; required to assemble track group.

338

D6D6 SEALED TRACKHYBRID SPLIT MASTER LINKS10K, 26K, 23U, 24U, 74W, 75W, 1Y, 3X, 4X, 5X, 6X, 19X, 20X, 69U, 41A, 71A, 73A, 74A, 76A, 82A, 83A, 96A, 46J, 47J, 55J, 69J, 99J, 2MJ,8FJ8.00" (203.2 mm) PITCH – 3/4" BOLT(Cont'd.)

PART NUMBER 36 SECTION 41 SECTIONLink Assembly (Quantity 2) 238-9951 238-9954LH Bushing End Master 228-2740 1 1RH Regular 228-2735 35 40LH Regular 228-2736 35 40Other ComponentsPin 4M-5989 36 41Bushing 237-7305 36Seal 8M-7231 144 164Track Hardware (9)

Bolt 1S-1859 140 160Nut 1S-1860 140 160Master Bolt 9S-1838 4 4

D6 SEALED TRACKFORMER SEALED TRACK, SPLIT MASTER LINKS



Link Assembly (Quantity 2) 3P-1088 (10) 3P-5927 (11)

Components of Link AssemblyTrack LinksRH Pin End Master 6Y-6743 1 1LH Pin End Master 6Y-6744 1 1RH Bushing End Master 6Y-6745 1 1LH Bushing End Master 6Y-6746 1 1RH Regular 3P-1112 35 40LH Regular 3P-1113 35 40Other ComponentsPin 4M-5989 36 41Bushing 4M-5991 36 41Seal 8M-7231 144 164Track Hardware (9)

Bolt 1S-1859 140 160Nut 1S-1860 140 160Master Bolt 9S-1838 4 4

9 Not part of link assembly; required to assemble track group.10 Service replaced by 238-9951 hybrid link assembly.11 Service replaced by 238-9954 hybrid link assembly.

339

D6D6 SEALED TRACKFORMER SEALED TRACK, SPLIT MASTER LINKS10K, 26K, 23U, 24U, 74W, 75W, 1Y, 3X, 4X, 5X, 6X, 19X, 20X, 69U, 41A, 71A, 73A, 74A, 76A, 82A, 83A, 96A, 46J, 47J, 55J, 69J, 99J, 2MJ,8FJ8.00" (203.2 mm) PITCH – 3/4" BOLT(Cont'd.)

PART NUMBER 36 SECTION 41 SECTIONLink Assembly (Quantity 2) 3P-1088 (10) 3P-5927 (11)

Special Sets/GroupsPin and Bushing Group (36 Sections) 6P-4235 1 1

D6 SEALED TRACKHYBRID, ONE PIECE MASTER LINKS



Link Assembly – 36 Section 2 238-9950Components of Link AssemblyTrack LinksRH Master 1 240-2503LH Master 1 240-2504RH Regular 35 228-2735LH Regular 35 228-2736Other ComponentsPin 35 4M-5989Master Pin 1 8E-0855Bushing 35 237-7305Master Bushing 1 237-7306Seal (Spring Washer) 144 8M-7231Spacer 2 8M-7290Track Hardware (12)

Bolt 144 1S-1859Nut 144 1S-1860

10 Service replaced by 238-9951 hybrid link assembly.11 Service replaced by 238-9954 hybrid link assembly.12 Not part of link assembly; required to assemble track group.

340

D6D6 SEALED TRACK

FORMER, ONE PIECE MASTER LINKS10K, 26K, 23U, 24U, 74W, 75W, 1Y, 3X, 4X, 5X, 6X, 19X, 20X, 69U, 41A,71A, 73A, 74A, 76A, 82A, 83A, 96A, 46J, 47J, 55J, 69J, 99J, 2MJ, 8FJ

8.00" (203.2 mm) PITCH – 3/4" BOLTQUANTITY FORMER PART NUMBER


Components of Link AssemblyTrack LinksRH Regular 36 3P-1112LH Regular 36 3P-1113Other ComponentsPin 35 4M-5989Master Pin 1 8E-0855Bushing 35 4M-5991Master Bushing 1 4M-5992Seal 144 8M-7231Spacer 2 8M-7290Track Hardware (14)

Bolt 144 1S-1859Nut 144 1S-1860Special Sets/GroupsPin and Bushing Group (36 Sections) 1 6P-4235

D6 EXTENDED WEAR LIFE TRACK*10K, 26K, 23U, 24U, 74W, 75W, 1Y, 3X, 4X, 5X, 6X, 19X, 20X, 69U, 41A,71A, 73A, 74A, 76A, 82A, 83A, 96A, 46J, 47J, 55J, 69J, 99J, 2MJ, 8FJ



Components of Link AssemblyTrack LinksRH Pin End Master 1 6Y-6747LH Pin End Master 1 6Y-6748RH Bushing End Master 1 6Y-6749LH Bushing End Master 1 6Y-6750RH Regular 35 7T-4645LH Regular 35 7T-4646Other ComponentsPin 36 160-7819 (16)

13 For 36, 39, or 41 section link assemblies, upgrade to 238-9951 (36 Section) or 238-9954 (41 Section) hybrid link assembly and add or re-move appropriate number of sections.

14 Not part of link assembly; required to assemble track group.15 Service replaced by 236-9861 hybrid link assembly. If 39, 41, section link assemblies are required refer to (D6 Sealed and Lubricated

Track, hybrid split master links) table.16 Former pin 3P-1108 (Use 9G-1642 Stopper)

341

D6D6 EXTENDED WEAR LIFE TRACK*10K, 26K, 23U, 24U, 74W, 75W, 1Y, 3X, 4X, 5X, 6X, 19X, 20X, 69U, 41A,71A, 73A, 74A, 76A, 82A, 83A, 96A, 46J, 47J, 55J, 69J, 99J, 2MJ,8FJ8.00" (203.2 mm) PITCH – 3/4" BOLT(Cont'd.)


Bushing 36 8E-5257 (17)

Seal Assembly (Rigid) 72 250-3996Thrust Ring 72 3P-1104Stopper 36 5G-2247Plug 36 6Y-0473Track Hardware (18)

Bolt 140 1S-1859Nut 140 1S-1860Master Bolt 4 9S-1838Special Sets/GroupsBushing and Seal Group (36 Sections) 1 6I-8061Seal Set (86 Seal Assemblies) 1 252-7857

* Note: Extended Wear Link Assemblies require special rollers and idlers to match the high rail link; refer to roller and idler sections for details.

D6D HEAVY DUTY TRACK*36, 39, 41 SECTION


NUMBER 36 SECTION 39 SECTION 41 SECTIONLink Assembly – (Quantity 2) 142-1365 (19) 6I-9668 6I-9671Components of Link AssemblyTrack LinksRH Pin End Master 8E-7407 1 1 1LH Pin End Master 8E-7408 1 1 1RH Bushing End Master 8E-7409 1 1 1LH Bushing End Master 8E-7410 1 1 1RH Regular 8E-7405 35 38 40LH Regular 8E-7406 35 38 40Other ComponentsPin 160-7820 (20) 36 39 41Bushing 8E-7222 36 39 41Seal Assembly (Rigid) 207-0544 72 78 82

15 Service replaced by 236-9861 hybrid link assembly. If 39, 41, section link assemblies are required refer to (D6 Sealed and LubricatedTrack, hybrid split master links) table.

17 If small O.D. bushing is required, use 3P-1109.18 Not part of link assembly; required to assemble track group.19 Use 6I-9668 link assembly and remove three (3) sections.20 Former pin 8E-7220 (Use 9G-1642 stopper).

342

D6D6D HEAVY DUTY TRACK*36, 39, 41 SECTION8.00" (203.2 mm) PITCH – 3/4" BOLT(Cont'd.)

PARTNUMBER 36 SECTION 39 SECTION 41 SECTION

Link Assembly – (Quantity 2) 142-1365 (19) 6I-9668 6I-9671Thrust Ring 152-8071 72 78 82Stopper 5G-2247 36 39 41Plug 6Y-0473 36 39 41Track Hardware (21)

Bolt 6V-1792 140 152 160Nut 1S-1860 140 152 160Master Bolt 9S-1838 4 4 4Special Sets/GroupsSeal Set (90 Seal Assemblies) 256-9360 1 1 1Bushing and Seal Group (39 Sections) 115-2440 1 1 1

* When installing Heavy Duty Track on D6 machines, refer to IRM UC97-6 for installation and guarding information. The following are required: New D6R/H TrackShoe. New D6D Extended Wear life Idlers (7T-4562). New D6D Extended Wear life Rollers or new D6R/H Roller Groups. Track guides and guards reworked. Recoilrod shortened.

D6 TRACKSPLIT MASTER LINKS (REPLACEMENT TRACK FOR CURRENT 6.75")*

37A, 44A, 8U, 9U6.91" (175.5 mm) PITCH – 5/8" BOLTQUANTITY SEALED PART NUMBER SALT PART NUMBER

Link Assembly – 38 Section 2 – (22) – (23)

Components of Link AssemblyTrack LinksRH Pin End Master 1 3P-3043 3P-3043LH Pin End Master 1 3P-3044 3P-3044RH Bushing End Master 1 3P-3045 3P-3045LH Bushing End Master 1 3P-3046 3P-3046RH Regular 37 3P-7153 3P-7153LH Regular 37 3P-7154 3P-7154Other ComponentsPin 38 6B-5502 160-7818 (24)

Bushing 38 5S-0710 7T-4636Seal 152 5S-0709 –

Seal Assembly (Rigid) 76 – 250-3990Thrust Ring 76 – 3P-3878

19 Use 6I-9668 link assembly and remove three (3) sections.21 Not part of the link assembly; required to assemble track group.22 Order 3P-5757 link assembly and remove one section.23 Order 154-3672 link assembly and remove one section.24 Former pin 3P-3880 (Use 9G-1642 Stopper)

343

D6D6 TRACKSPLIT MASTER LINKS (REPLACEMENT TRACK FOR CURRENT 6.75")*37A, 44A, 8U, 9U6.91" (175.5 mm) PITCH – 5/8" BOLT(Cont'd.)

QUANTITY SEALED PART NUMBER SALT PART NUMBERLink Assembly – 38 Section 2 – (22) – (23)

Stopper 38 – 5G-2247Plug 38 – 6Y-0473Track Hardware (25)

Bolt 148 7H-3597 7H-3597Nut 148 1M-1408 1M-1408Master Bolt 4 3P-2274 3P-2274Special Sets/GroupsBushing and Seal Group (46 Sections) 1 – 154-3659Pin and Bushing Group (38 Sections) 1 6P-4234 –

Seal Set (92 Seal Assemblies) 1 – 252-7859

* Reuse of 6.75" pitch track shoes with 6.91" pitch track is acceptable in conditions where shoe leading and trailing edge gap is not critical. Shoe bolt pattern iscommon between 6.75" and 6.91" pitch track.

D6 TRACKSPLIT MASTER LINKS (REPLACEMENT TRACK FOR CURRENT 6.75")*

37A, 44A, 8U, 9U6.91" (175.5 mm) PITCH – 5/8" BOLTQUANTITY SEALED PART NUMBER SALT PART NUMBER

Link Assembly – 39 Section 2 3P-5757 154-3672Components of Link AssemblyTrack LinksRH Pin End Master 1 3P-3043 3P-3043LH Pin End Master 1 3P-3044 3P-3044RH Bushing End Master 1 3P-3045 3P-3045LH Bushing End Master 1 3P-3046 3P-3046RH Regular 38 3P-7153 3P-7153LH Regular 38 3P-7154 3P-7154Other ComponentsPin 39 6B-5502 160-7818 (26)

Bushing 39 5S-0710 7T-4636Seal 156 5S-0709 –

Seal Assembly (Rigid) 78 – 250-3990Thrust Ring 78 – 3P-3878Stopper 78 – 5G-2247

22 Order 3P-5757 link assembly and remove one section.23 Order 154-3672 link assembly and remove one section.25 Not part of the link assembly; required to assemble track group.26 Former pin 3P-3880 (Use 9G-1642 Stopper)

344

D6D6 TRACKSPLIT MASTER LINKS (REPLACEMENT TRACK FOR CURRENT 6.75")*37A, 44A, 8U, 9U6.91" (175.5 mm) PITCH – 5/8" BOLT(Cont'd.)

QUANTITY SEALED PART NUMBER SALT PART NUMBERLink Assembly – 39 Section 2 3P-5757 154-3672Plug 39 – 6Y-0473Track Hardware (27)

Bolt 152 7H-3597 7H-3597Nut 152 1M-1408 1M-1408Master Bolt 4 3P-2274 3P-2274Special Sets/GroupsBushing and Seal Group (46 Sections) 1 – 154-3659Pin and Bushing Group (38 Sections) 1 6P-4234 –

Seal Set (92 Seal Assemblies) 1 – 252-7859

* Reuse of 6.75" pitch track shoes with 6.91" pitch track is acceptable in conditions where shoe leading and trailing edge gap is not critical. Shoe bolt pattern iscommon between 6.75" and 6.91" pitch track.

D6 TRACKSEALED ONE PIECE MASTER LINKS (REPLACEMENT TRACK FOR FORMER 6.75")*

37A, 44A, 8U, 9U6.91" (175.5 mm) PITCH – 5/8" BOLTFORMER PART NUMBER 38 SECTION 39 SECTION

Link Assembly – (Quantity 2) – (28) – (29)

Components of Link AssemblyTrack LinksRH Master (Full) 3P-7155 1 1LH Master (Full) 3P-7156 1 1RH Regular 3P-7153 37 38LH Regular 3P-7154 37 38Other ComponentsPin 6B-5502 37 38Master Pin 8M-7456 1 1Bushing 5S-0710 37 38Master Bushing 5S-0753 1 1Seal 5S-0709 152 156Spacer 5S-0754 2 2Track Hardware (27)

Bolt 7H-3597 152 156Nut 1M-1408 152 156

27 Not part of the link assembly; required to assemble track group.28 Serviced as individual components; upgrade to 3P-5757 (Sealed) or 154-3672 (S&L) and remove one section.29 Serviced as individual components; upgrade to 3P-5757 (Sealed) or 154-3672 (S&L) link assembly.

345

D6D6 TRACKSEALED ONE PIECE MASTER LINKS (REPLACEMENT TRACK FOR FORMER 6.75")*37A, 44A, 8U, 9U6.91" (175.5 mm) PITCH – 5/8" BOLT(Cont'd.)

FORMER PART NUMBER 38 SECTION 39 SECTIONLink Assembly – (Quantity 2) – (28) – (29)

Special Sets/GroupsPin and Bushing Group (38 Sections) 6P-4234 1 1

* Reuse of 6.75" pitch track shoes with 6.91" pitch track is acceptable in conditions where shoe leading and trailing edge gap is not critical. Shoe bolt pattern iscommon between 6.75" and 6.91" pitch tracks.

D6 TRACK SEALEDONE PIECE MASTER LINKS

37A, 44A6.75" (171.5 mm) 5/8" BOLT

QUANTITY PART NUMBERLink Assembly – 40 Section 2 2S-7579Components of Link AssemblyTrack LinksRH Regular 40 2S-5959LH Regular 40 2S-5960Other ComponentsPin 39 6B-5502Master Pin 1 8M-7456Bushing 39 8M-7457Master Bushing 1 2A-3241Seal (Spring Washer) 160 8M-7454Spacer 2 8M-7455Track Hardware (30)

Bolt 160 7H-3597Nut 160 1M-1408




Extreme Service 18.0" (460 mm) 6Y-6393 6Y-6392Extreme Service (Trapezoidal Opening) 18.0" (460 mm) 1Q-4985 1Q-4984Extreme Service 20.0" (510 mm) 6Y-6395 6Y-6394Extreme Service 22.0" (560 mm) 6Y-6411 6Y-6412Extreme Service 24.0" (610 mm) 6Y-6398 6Y-6397

28 Serviced as individual components; upgrade to 3P-5757 (Sealed) or 154-3672 (S&L) and remove one section.29 Serviced as individual components; upgrade to 3P-5757 (Sealed) or 154-3672 (S&L) link assembly.30 Not part of link assembly; required to assemble track group.

346

D6D6 TRACK SHOES8.00" (203.2 mm) PITCH – 3/4" BOLT(Cont'd.)



Extreme Service (Trapezoidal Opening) 24.0" (610 mm) 3Q-5391 (31) 157-1374Extreme Service 30.0" (760 mm) 6Y-6405 6Y-6404Extreme Service 36.0" (915 mm) 6Y-6401 169-5867Moderate Service 18.0" (460 mm) 6Y-6289 6Y-6290Moderate Service (Trapezoidal Opening) 18.0" (460 mm) 1Q-4921 1Q-4922Moderate Service 20.0" (510 mm) 6Y-6291 6Y-6292Moderate Service 22.0" (560 mm) 6Y-6293 6Y-6294Moderate Service 24.0" (610 mm) 6Y-6295 6Y-6296Moderate Service 26.0" (660 mm) 6Y-6297 6Y-6298Moderate Service 30.0" (760 mm) 6Y-6299 6Y-6300Moderate Service 36.0" (915 mm) 196-1237 196-1236Double Grouser 17.0" (430 mm) 8E-4501 8E-4502Double Grouser 17.7" (450 mm) 8E-4494 8E-4495Double Grouser 21.0" (530 mm) 8E-4499 8E-4500Double Grouser 21.7" (550 mm) 8E-4496 8E-4497Triple Grouser 17.0" (430 mm) 2V-5114 8E-4502 (32)

Self Cleaning 36.0" (915 mm) 3P-1134 3P-1133




Moderate Service 18.0" (460 mm) 175-8020 175-8021Moderate Service 20.0" (510 mm) 175-8365 175-8366Moderate Service 22.0" (560 mm) 175-8367 175-8368Double Grouser 19.7" (500 mm) 8E-4722 8E-4723Triple Grouser 15.0" (380 mm) 3T-3690 8E-4725 (33)

D6 SPROCKETS74A, 76A, 82A, 83A, 71A, 73A, 41A, 23U, 24U, 69U, 46J, 47J, 55J, 69J, 49W, 74W, 75W, 8FJ, 2MJ, 10K, 17R, 3X, 4X, 5X, 6X, 19X, 20X

8.00" (203.2 mm) PITCH

(PER SIDE) QUANTITY PART NUMBERSprocket Hub 1 8P-1851Sprocket Segment (5 Tooth) 5 258-9797

Mud/Snow Segment (5 Tooth) 5 8P-9454Adapter Ring 1 4S-9004

31 Clipped Grouser32 Double Grouser Master - Trim grouser to match triple grouser height.33 Double Grouser Master (Not Center Punched). -Trim grouser to match triple grouser height.

347

D6D6 SPROCKETS74A, 76A, 82A, 83A, 71A, 73A, 41A, 23U, 24U, 69U, 46J, 47J, 55J, 69J, 49W, 74W, 75W, 8FJ, 2MJ, 10K, 17R, 3X, 4X, 5X, 6X, 19X, 20X8.00" (203.2 mm) PITCH(Cont'd.)(PER SIDE) QUANTITY PART NUMBERRim 1 9M-3818 (34)

Bolt 20 3S-8182Nut 20 7H-3607

D6 SPROCKET3/4" MOUNTING BOLTS

6HC(PER SIDE) QUANTITY PART NUMBERSprocket Segment (5 Tooth) 5 117-1616Bolt 20 117-1617Nut 20 7H-3608

D6 SPROCKETSEARLY MACHINE37A, 44A, 8U, 9U

6.91" (175.5 mm) PITCH


Sprocket Segment (3 Tooth) 9 185-6151Mud/Snow Segment (3 Tooth) 9 8P-9453Adapter Ring 1 5S-0834Bolt 27 3S-8182Nut 27 7H-3607

D6 IDLERSCURRENT

41A, 71A, 73A, 76A, 82A, 83A, 23U, 24U, 3X, 4X, 5X, 6X, 1Y, 19X, 20X, 46J, 47J, 55J, 69J, 99J, 69U, 49W, 2MJ, 8FJ, 10K

(PER MACHINE) QUANTITY PART NUMBERIdler Assembly 2 5M-5009Extended Wear Idler Assembly (36) 2 7T-4562Other ComponentsBushing Assembly 2 3P-1900Bearing (37) 1 8P-5197Shaft 1 5M-5005Bearing Block 1 5M-5003Bearing Block 1 5M-5004

34 Service replaced with Classic 289-2207. Refer to Special Instructions SEHS7750 and SEHS7274 for more information.35 Service replaced by Classic 227-4769.36 For use with Extended Wear Life Track.37 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

348

D6D6 IDLERSCURRENT41A, 71A, 73A, 76A, 82A, 83A, 23U, 24U, 3X, 4X, 5X, 6X, 1Y, 19X, 20X, 46J, 47J, 55J, 69J, 99J, 69U, 49W, 2MJ, 8FJ, 10K(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERSeal – Duo-Cone Group 2 6Y-0925Toric Ring (38) 2 8H-2262Seal – Bushing O-Ring 2 1H-6227Seal – Shaft O-Ring 2 5F-8000Seal – Plug 1 1S-8947Bolt 12 0S-1588Washer 12 3B-4506Plug 1 2P-0347Special Application SealsSeal – Duo-Cone Group (Steel Mill) 2 4S-8984Toric Ring (38) 2 9M-9730Seal – Bushing O-Ring (Steel Mill) 2 2S-2182Seal – Shaft O-Ring (Steel Mill) 2 8M-4436

D6 IDLERSLARGE O.D., FORMER8U10971-UP, 9U29219-UP

(PER MACHINE) QUANTITY FORMER PART NUMBERIdler Assembly 2 8S-2560 (39)

Other ComponentsBushing Assembly 2 3P-8272Bearing (38) 1 8P-6652Shaft 1 5M-1913Seal – Duo-Cone Group 2 9W-5224Toric Ring (38) 2 1M-3097Seal – Bushing O-Ring 2 1H-6227Seal – Shaft O-Ring 2 7F-8267Bolt 12 0S-1587Washer 12 3B-4508Plug 1 2B-7408Special Application Seals (Low/High Temperature)Seal– Duo- Cone Group 2 5K-6191Toric Ring (38) 2 2S-2181Seal– Bushing O-Ring 2 2S-2182Seal– Shaft O-Ring 2 8M-5661

38 Component of preceding assembly or group; quantity shown is quantity per assembly or group.39 Serviced Replaced By - 7T-3501.

349

D6D6 IDLERS

SMALL O.D., FORMER8U1-10970, 9U1-29218

(PER MACHINE) QUANTITY FORMER PART NUMBERIdler Assembly 2 1M-3121Other ComponentsBushing Assembly 2 3P-8272Bearing (40) 1 8P-6652Shaft 1 5M-1913Seal – Duo-Cone Group 2 9W-5224Toric Ring (40) 2 1M-3097Seal – Bushing O-Ring 2 1H-6227Seal – Shaft O-Ring 2 7F-8267Bolt 12 0S-1587Washer 12 3B-4508Plug 1 2B-7408Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 5K-6191Toric Ring (40) 2 2S-2181Seal – Bushing O-Ring 2 2S-2182Seal – Shaft O-Ring 2 8M-5661

D6 CARRIER ROLLERS41A, 71A, 73A, 74A, 76A, 82A, 83A, 23U, 24U, 3X, 4X, 5X, 6X, 19X, 20X, 46J, 47J, 55J, 69J, 99J, 69U, 49W, 2MJ, 8FJ, 10K, 1Y

(PER MACHINE) QUANTITY FORMER PART NUMBER PART NUMBERGroup 4 – (41) 3T-3206Components of GroupRoller Shell 1 – (41) 9S-8320Shaft 1 1S-4467 3T-3207Cup 2 1M-7911 9S-3581Cone 2 1M-7912 9S-3582Ring 1 5H-0034 1M-7914Cover 1 5M-2043 5M-2043Collar 1 1S-4468 9S-3567Support 1 1M-7915 –

Plug 1 2P-0347 2P-0347Bolt 3 0S-1594 0S-1594Bolt 2 – 5K-9107Plate 1 – 8P-6188Nut 1 1M-7916 –Ring 1 1M-7913 –

40 Component of preceding assembly or group; quantity shown is quantity per assembly or group.41 Upgrade to 3T-3206 group.

350

D6D6 CARRIER ROLLERS41A, 71A, 73A, 74A, 76A, 82A, 83A, 23U, 24U, 3X, 4X, 5X, 6X, 19X, 20X, 46J, 47J, 55J, 69J, 99J, 69U, 49W, 2MJ, 8FJ, 10K, 1Y(Cont'd.)(PER MACHINE) QUANTITY FORMER PART NUMBER PART NUMBERSeal – Duo-Cone Group 1 9W-5224 6Y-0925Toric Ring (42) 2 1M-3097 8H-2262Seal – Cover 1 2H-6338 2H-6338Seal – Support 1 4H-9105 –

Seal – Plug 1 1S-8947 1S-8947Seal – Shaft O-Ring 1 7F-8267 1H-9696Special Application SealsSeal – Duo-Cone Group (Steel Mill) 1 5K-6191 4S-8984Toric Ring (42) 2 2S-2181 9M-9730

D6 CARRIER ROLLERSEARLY MODEL37A, 44A, 8U, 9U

(PER MACHINE) QUANTITY PART NUMBERGroup 4 5A-8374Components of GroupRoller Shell 1 5A-8375Shaft 1 3T-3207Cup 2 9S-3581Cone 2 9S-3582Ring 1 1M-7914Cover 1 5M-2043Collar 1 9S-3567Plug 1 2P-0347Bolt 3 0S-1594Bolt 2 5K-9107Plate 1 8P-6188Nut 1 1M-7916Ring 1 1M-7913Seal – Duo-Cone Group 1 6Y-0925Toric Ring (42) 2 8H-2262Seal – Cover 1 2H-6338Seal – Plug 1 1S-8947Seal – Shaft O-Ring 1 1H-9696Special Application SealsSeal – Duo-Cone Group (Steel Mill) 1 4S-8984Toric Ring (42) 2 9M-9730

42 Component of preceding group; quantity shown is the quantity per group.

351

D6D6 STANDARDIZED TRACK ROLLERS

CURRENT 3/4" MOUNTING HARDWARE4X4775-UP, 74W, 75W, 3X819-UP, 5X, 6X819-UP, 19X, 20X, 1Y, 2MJ, 8FJ, 5X780-UP, 69U






Single Flange (SF) (High Heat) 6 288-0947Mounting Hardware (44)


D6 STANDARDIZED TRACK ROLLERSFORMER 5/8" MOUNTING HARDWARE

4X1-4774, 41A, 71A, 73A, 74A, 76A, 82S, 83A, 23U, 90B, 46J, 47J, 55J, 69J, 99J, 10K, 17R, 24U, 49W, 5X1-779







Cap 2 317-9078Bolt (5/8") 4 1D-4585Washer 4 2S-0736

D6 TRACK ROLLERS3/4" MOUNTING HARDWARE

4X4775-UP, 74W, 75W, 3X819-UP, 5X, 6X819-UP, 19X, 20X, 1Y, 2MJ, 8FJ, 5X780-UP, 69U



Extended Wear Life (DF) (48) 6 (45) 118-1635 (46)

Extended Wear Life (SF) (48) 6 118-1634 (47)

43 8 required for LGP machines.44 These components are not included in the roller group; quantities shown are required to mount each roller.45 8 required on LGP machines.46 Serviced Replaced By: 1 - Roller Group (DF) 288-0935, 2 - End Cap 317-9079, 4 - Bolt 1D-4610, 4 - Washer 5P-8248.47 Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-9079, 4 - Bolt 1D-4610, 4 - Washer 5P-8248.48 For use with Extended Wear Life Track.

352

D6D6 TRACK ROLLERS3/4" MOUNTING HARDWARE4X4775-UP, 74W, 75W, 3X819-UP, 5X, 6X819-UP, 19X, 20X, 1Y, 2MJ, 8FJ, 5X780-UP, 69U(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERComponents of GroupRoller Shell (DF) 1 9G-8032 (49)

Roller Shell (SF) 1 9G-8027 (50)

Extended Wear Life Shell (DF) (51) 1 9W-5411 (49)

Extended Wear Life Shell (SF) (51) 1 9W-5408 (50)

Bushing Assembly 2 2P-8048Bearing (52) 1 8P-5197Shaft 1 116-6702 (53)

End Collar 2 7G-0418 (54)

Ring 2 5M-4443Bolt 12 2P-3201Seal – Duo-Cone Group 2 6Y-0925Toric Ring (52) 2 8H-2262Seal – Bushing O-Ring 2 2H-3928Seal – Shaft O-Ring 2 5F-8000Stopper 1 7G-4332Plug 1 6Y-0473Mounting Hardware (55)

Bolt 4 1D-4608Washer 4 5H-1504Special Application SealsSeal – Duo-Cone Group (Steel Mill) 2 4S-8984Toric Ring (52) 2 9M-9730Seal – Bushing O-Ring (Steel Mill) 2 8S-5654Seal – Shaft O-Ring (Steel Mill) 2 8M-4436

49 Serviced Replaced By: 1 - Roller Group (DF) 288-0935, 2 - End Cap 317-9079, 4 - Bolt 1D-4610, 4 - Washer 5P-8248.50 Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-9079, 4 - Bolt 1D-4610, 4 - Washer 5P-8248.51 For use with Extended Wear Life Track.52 Component of preceding assembly or group; quantity shown is per assembly or group.53 Replaces former 7G-0419 shaft, requires 2, 7G-0418 end collars. Serviced Replaced By: 1 - Roller Group (DF) 288-0935, or 1 - Roller Group

(SF) 288-0934, 2 - End Cap 317-9079, 4 - Bolt 1D-4610, 4 - Washer 5P-8248.54 If 7G-0419 shaft is used, use 1 - 7G-4018 and 1 - 7G-0417 end collar.55 These components are not included in the roller group; quantities shown are required to mount each roller.

353

D6D6 TRACK ROLLERS

FORMER 5/8" MOUNTING HARDWARE4X1-4774, 41A, 71A, 73A, 74A, 76A, 82S, 83A, 23U, 90B, 46J, 47J, 55J, 69J, 99J, 10K, 17R, 24U, 49W, 5X1-779

(PER MACHINE) QUANTITY PART NUMBERHEAVY DUTYPART NUMBER

Double Flange (DF) 6 (56) 118-1615 (57) 122-0217 (57)

Single Flange (SF) 6 118-1614 (58) 122-0216 (58)

Components of GroupRoller Shell (DF) 1 6Y-2904 (57) 9G-8032 (59)

Roller Shell (SF) 1 6Y-2902 (58) 9G-8027 (60)

Extended Wear Life Shell (DF) (61) 1 – 9W-5411 (59)

Extended Wear Life Shell (SF) (61) 1 – 9W-5408 (60)

Bushing Assembly 2 2P-8048 2P-8048Bearing (62) 1 8P-5197 8P-5197Shaft 1 116-6702 (63) 116-6702 (63)

End Collar 2 5M-4436 (64) 5M-4436 (64)

Ring 2 5M-4443 5M-4443Bolt 12 2P-3201 1A-2029Washer 12 – 5M-2894Seal – Duo-Cone Group 2 6Y-0925 1M-8747Toric Ring (62) 2 8H-2262 8H-2262Seal – Bushing O-Ring 2 2H-3928 2H-3928Seal – Shaft O-Ring 2 5F-8000 5F-8000Stopper 1 7G-4332 7G-4332Plug 1 6Y-0473 6Y-0473Mounting Hardware (65)

Bolt 4 1A-8537 1A-8537Washer 4 2S-0736 2S-0736Special Application SealsSeal – Duo-Cone Group (Steel Mill) 2 4S-8984 4S-8984Toric Ring (62) 2 9M-9730 9M-9730Seal – Bushing O-Ring (Steel Mill) 2 8S-5654 8S-5654Seal – Shaft O-Ring (Steel Mill) 2 8M-4436 8M-4436

56 8 required on LGP machines.57 Serviced Replaced By: 1 - Roller Group (DF) 288-0935, 2 - End Cap 317-9078, 4 - Bolt 1D-4585, 4 - Washer 2S-0736.58 Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-9078, 4 - Bolt 1D-4585, 4 - Washer 2S-0736.59 Increased bore hardness. Serviced Replaced By: 1 - Roller Group (DF) 288-0935, 2 - End Cap 317-9078, 4 - Bolt 1D-4585, 4 - Washer 2S-

0736.60 Increased bore hardness. Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-9078, 4 - Bolt 1D-4585, 4 - Washer 2S-

0736.61 For use with Extended Wear Life Track.62 Component of preceding assembly or group; quantity shown is per assembly or group.63 Replaces former 5M-4448 shaft; requires 2 – 5M-4436 end collars. Serviced Replaced By: 1 - Roller Group (DF) 288-0935, or 1 - Roller

Group (SF) 288-0934, 2 - End Cap 317-9078, 4 - Bolt 1D-4585, 4 - Washer 2S-0736.64 If 5M-4448 shaft is used, use 1 – 5M-4436 and 1 – 5M-4435 end collar.65 These components are not included in the roller group; quantities shown are required to mount each roller.

354

D6D6 TRACK ROLLERS

EARLY MACHINE 5/8" MOUNTING HARDWARE37A, 44A, 8U, 9U





Bushing Assembly 2 2P-8045Bearing (68) 1 8S-5796Shaft 1 118-1613 (69)



Bolt 4 8S-9092Washer 4 5P-8247Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 5K-6191Toric Ring (68) 2 2S-2181Seal – Bushing O-Ring 2 2S-2182Seal – Shaft O-Ring 2 8M-5661

D6 END GUIDING GUARDS3X, 4X, 5X, 19X, 20X, 2MJ, 8FJ

(PER MACHINE) QUANTITY PART NUMBERFront (Outer LH, Inner RH)Guard Assembly 1 7G-8517Wear Strip 1 9S-8245Bolt 4 7B-3235

66 Serviced Replaced By: 1 - Roller Group (DF) 310-4915, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247.67 Serviced Replaced By: 1 - Roller Group (SF) 310-4912, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247.68 Component of preceding assembly or group; quantity shown is per assembly or group.69 Serviced Replaced By: 1 - Roller Group (DF) 310-4915, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247. Serviced Replaced By:

1 - Roller Group (SF) 310-4912, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247.70 If 5M-1915 shaft is used, use 1 – 5M-0627 and 1 – 1M-3812 end collar.71 These components are not included in the roller group; quantities shown are required to mount each roller.

355

D6D6 END GUIDING GUARDS3X, 4X, 5X, 19X, 20X, 2MJ, 8FJ(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERLock Washer 4 3B-4508Front (Outer RH, Inner LH)Guard Assembly 1 7G-8513Wear Strip 1 9S-8246Bolt 4 7B-3235Lock Washer 4 3B-4508Rear (Outer RH)Guard Assembly 1 7G-8517Wear Strip 1 9S-8245Bolt 4 7B-3235Lock Washer 4 3B-4508Rear (Outer LH)Guard Assembly 1 7G-8513Wear Strip 1 9S-8246Bolt 4 7B-3235Lock Washer 4 3B-4508

D6 END GUIDING GUARDS41A, 71A, 73A, 74A, 76A, 82A, 83A, 23U, 24U, 3X, 4X, 5X, 6X, 19X, 20X, 46J, 47J, 69J, 99J, 10K, 1Y, 49W, 69U, 74W, 75W

(PER MACHINE) QUANTITY PART NUMBERFront (Outer LH, Inner RH)Guard Assembly 1 9S-8258Wear Strip 1 9S-8245Bolt 4 7B-3235Lock Washer 4 3B-4508Front (Outer RH, Inner LH)Guard Assembly 1 9S-8257Wear Strip 1 9S-8246Bolt 4 7B-3235Lock Washer 4 3B-4508Rear (Outer RH)Guard Assembly 1 9S-8258Wear Strip 1 9S-8245Bolt 4 7B-3235Lock Washer 4 3B-4508Rear (Outer LH)Guard Assembly 1 9S-8257Wear Strip 1 9S-8246Bolt 4 7B-3235Lock Washer 4 3B-4508

356

D6D6 CENTER GUIDING GUARDS

3X, 4X, 5X, 6X, 2MJ, 8FJ

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 1 7G-8400Wear Strip 1 3V-1133Bolt 4 6H-1717Lock Washer 4 3B-4508Bolt 8 1D-4608Washer 1 2S-0115Spacer 1 3P-4133

D6 CENTER GUIDING GUARDS41A, 71A, 73A, 74A, 76A, 82A, 83A, 23U, 24U, 3X, 4X, 5X, 6X, 19X, 20X, 46J, 47J, 69J, 99J, 10K, 1Y, 49W, 69U, 74W, 75W

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 1 1P-0963Wear Strip 1 3V-1133Bolt 4 6H-1717Lock Washer 4 3B-4508Bolt 8 1D-4608Washer 1 2S-0115Spacer 1 3P-4133

D6 FINAL DRIVE GUARDS41A, 71A, 73A, 74A, 76A, 82A, 83A, 23U, 24U, 3X, 4X, 5X, 6X, 19X, 20X, 46J, 47J, 69J, 99J, 2MJ, 8FJ, 10K, 1Y, 49W, 69U, 74W, 75W

(PER MACHINE) QUANTITY PART NUMBERRH 1 9M-5045LH 1 9M-5045Bolts 8 0V-0375Washer 8 0L-1714Lock Washer 8 2M-0849

357

D7, 571, 572D7 SEALED AND LUBRICATED TRACK

HYBRID, SPLIT MASTER LINKS47A, 48A, 64A, 79A, 95A, 91E, 92E, 35N, 93N, 94N, 91V, 92V, 64V, 72W, 44W, 45W8.50" (215.9 mm) PITCH – 3/4" BOLT REGULAR SHOE, 7/8" BOLT MASTER SHOE

PART NUMBER 38 SECTION 41 SECTIONLink Assembly – (Quantity 2) 239-2230 (1) 239-6882 (1)

Components of Link AssemblyTrack LinksRH Pin End Master 255-4791 1 1LH Pin End Master 255-4792 1 1RH Bushing End Master 255-4793 1 1LH Bushing End Master 255-4794 1 1RH Regular 233-0385 37 40LH Regular 233-0386 37 40Other ComponentsPin 199-2794 38 41Bushing 237-3790 38 41Seal Assembly (Rigid) 251-1659 76 82Thrust Ring 152-8073 76 82Stopper 7G-4332 38 41Plug 6Y-0473 38 41Track Hardware (2)

Bolt (3/4") 7H-3598 148 160Nut 1S-1860 148 160Master Bolt (7/8") 9W-9058 4 4Special Sets/GroupsBushing and Seal Group (40 Sections) 261-2353 1 1Seal Set (86 Seal Assemblies) 251-1660 1 1

D7 SEALED AND LUBRICATED TRACK47A, 48A, 64A, 79A, 95A, 91E, 92E, 35N, 93N, 94N, 91V, 92V, 64V, 72W, 44W, 45W, 3GF, 3ZD, 7MB, C7G

8.50" (215.9 mm) PITCH – 3/4" BOLT


Components of Link AssemblyTrack LinksRH Pin End Master 2P-9653 1 1LH Pin End Master 2P-9654 1 1RH Bushing End Master 2P-9655 1 1

1 To be used with (5) 197-9679 sprocket segments. Refer to Special Instruction Form REHS1746 for master shoe rework.2 Not part of link assembly; required to assemble track group.3 Service replaced by (1) 239-2230 hybrid link assembly and (5) 197-9679 sprocket segments. Refer to Special Instruction Form REHS1746

for master shoe rework.4 Service replaced by (1) 239-6882 hybrid link assembly and (5) 197-9679 sprocket segments. Refer to Special Instruction Form REHS1746

for master shoe rework.

358

D7, 571, 572D7 SEALED AND LUBRICATED TRACK47A, 48A, 64A, 79A, 95A, 91E, 92E, 35N, 93N, 94N, 91V, 92V, 64V, 72W, 44W, 45W, 3GF, 3ZD, 7MB, C7G8.50" (215.9 mm) PITCH – 3/4" BOLT(Cont'd.)

PART NUMBER 38 SECTION 41 SECTIONLH Bushing End Master 2P-9656 1 1RH Regular 8S-2589 37 40LH Regular 8S-2590 37 40Other ComponentsPin 3P-0622 38 41Bushing 3P-0621 38 41Seal Assembly (Rigid) 250-3998 76 82Thrust Ring 3P-0623 76 82Stopper 7G-4332 38 41Plug 6Y-0473 38 41Track Hardware (5)

Bolt 7H-3598 148 160Nut 1S-1860 148 160Master Bolt 2P-9670 4 4Special Sets/GroupsBushing and Seal Group (38 Sections) 6I-8060 (6) 1 1

Seal Set (84 Seal Assemblies) 252-7858 1 1

D7 SEALED TRACKHYBRID, SPLIT MASTER LINKS

47A, 48A, 64A, 79A, 95A, 91E, 92E, 35N, 93N, 94N, 91V, 92V8.50" (215.9 mm) PITCH – 3/4" BOLT REGULAR SHOE, 7/8" BOLT MASTER SHOE


Components of Link AssemblyTrack LinksRH Pin End Master 1 255-4791LH Pin End Master 1 255-4792RH Bushing End Master 1 255-4793LH Bushing End Master 1 255-4794RH Regular 37 233-0385LH Regular 37 233-0386Other ComponentsPin 38 8E-4272Bushing 38 247-1475Seal 152 8M-6239

5 Not part of link assembly; required to assemble track group.6 Contains Extended Wear Life Bushings (8E-5258).7 To be used with (5) 197-9679 sprocket segments. Refer to Special Instruction Form REHS1746 for master shoe rework. If 41 section link

assembly is required order 246-5808 and add 3 sections.

359

D7, 571, 572D7 SEALED TRACKHYBRID, SPLIT MASTER LINKS47A, 48A, 64A, 79A, 95A, 91E, 92E, 35N, 93N, 94N, 91V, 92V8.50" (215.9 mm) PITCH – 3/4" BOLT REGULAR SHOE, 7/8" BOLT MASTER SHOE(Cont'd.)

QUANTITY PART NUMBERTrack Hardware (8)

Bolt (3/4") 148 7H-3598Nut 148 1S-1860Master Bolt (7/8") 4 9W-9058

D7 SEALED TRACK47A, 48A, 64A, 79A, 95A, 91E, 92E, 35N, 93N, 94N, 91V, 92V

8.50" (215.9 mm) PITCH – 3/4" BOLT

QUANTITY PART NUMBERLink Assembly – 38 Section 2 3P-0955 (9)

Components of Link AssemblyTrack LinksRH Pin End Master 1 2P-9653LH Pin End Master 1 2P-9654RH Bushing End Master 1 2P-9655LH Bushing End Master 1 2P-9656RH Regular 37 8S-2589LH Regular 37 8S-2590Other ComponentsPin 38 8E-4272Bushing 38 1M-3669Seal 152 8M-6239Track Hardware (8)

Bolt 148 7H-3598Nut 148 1S-1860Master Bolt 4 2P-9670Special Sets/GroupsPin and Bushing Group (38 Sections) 1 6P-4236

8 Not part of link assembly; required to assemble track group.9 Service replaced by (1) 246-5808 link assembly and (5) 197-9679 sprocket segments. Refer to Special Instruction Form REHS1746 for mas-

ter shoe rework. If 41 section link assembly is required order 246-5808 and add 3 sections.

360

D7, 571, 572D7 EXTENDED WEAR LIFE TRACK*

CURRENT, LARGE O.D. BUSHING8.50" (215.9 mm) PITCH – 3/4" BOLT


Components of Link AssemblyTrack LinksRH Pin End Master 1 7T-4659LH Pin End Master 1 7T-4660RH Bushing End Master 1 7T-4661LH Bushing End Master 1 7T-4662RH Regular 37 7T-4657LH Regular 37 7T-4658Other ComponentsPin 38 3P-0622Bushing 38 8E-5258 (11)


Bolt 148 7H-3598Nut 148 1S-1860Master Bolt 4 2P-9670Special Sets/GroupsBushing and Seal Group (38 Sections) 1 6I-8060Seal Set (84 Seal Assemblies) 1 252-7858

* Note: Extended Wear Link Assemblies require special rollers and idlers to match the high rail link; refer to roller and idler sections for details.

571,572 PIPELAYER TRACK571: 16W 572: 40U, 65A

8.50" (215.9 mm) PITCH – 3/4" BOLT

SEALED PART NUMBER 571 38 SECTION 572 39 SECTIONLink Assembly – (Quantity 2) 3P-0955 (13) – (14)

Components of Link AssemblyTrack LinksRH Pin End Master 2P-9653 1 1LH Pin End Master 2P-9654 1 1

10 Canceled replaced by (1) 239-2230 hybrid link assembly and (5) 197-9679 sprocket segments. Refer to Special Instruction Form REHS1746for master shoe rework.

11 If small O.D. Bushing required use part no. 3P0621.12 Not part of link assembly; required to assemble track group.13 Service replaced by (1) 246-5808 link assembly and (5) 197-9679 sprocket segments. Refer to Special Instruction Form REHS1746 for mas-

ter shoe rework.14 Order 38 Section, 246-5808 Link Assembly and add 1 section.

361

D7, 571, 572571,572 PIPELAYER TRACK571: 16W 572: 40U, 65A8.50" (215.9 mm) PITCH – 3/4" BOLT(Cont'd.)

SEALED PART NUMBER 571 38 SECTION 572 39 SECTIONRH Bushing End Master 2P-9655 1 1LH Bushing End Master 2P-9656 1 1RH Regular 8S-2589 37 38LH Regular 8S-2590 37 38Other ComponentsPin 8E-4272 38 39Bushing 1M-3669 38 39Seal 8M-6239 152 156Track Hardware (15)

Bolt 7H-3598 148 152Nut 1S-1860 148 152Master Bolt 2P-9670 4 4Special Sets/GroupsPin and Bushing Group (38 Sections) 6P-4236 1 1

D7, 572 SEALED TRACKD7 (36, 37, 40 SECTION): 7M, 3T, 17A D7, 572 (41 SECTION): 7M, 3T, 17A, 21A

8.00" (203.2 mm) PITCH – 3/4" BOLT


Components of Link AssemblyTrack LinksRH Regular 41 1S-1863LH Regular 41 1S-1864Other ComponentsPin 40 6B-5882Master Pin 1 8M-7288Bushing 40 8M-7289Master Bushing 1 5M-2033Seal (Spring Washer) 164 8M-7231Spacer 2 8M-7290Track Hardware (15)

Bolt 164 1S-1859Nut 164 1S-1860

15 Not part of link assembly; required to assemble track group.16 If 36, 37, 40, section link assemblies are required order 1S-6943 and remove appropriate number of sections.

362

D7, 571, 572D7, 571, 572 HYBRID TRACK SHOESUSE WITH TRACK LINKS 233-0385, 233-0386

8.50" (215.9 mm) PITCH - 3/4" BOLT REGULAR SHOE, 7/8" BOLT MASTER SHOE



Extreme Service 22.0" (560 mm) 188-5603 376-1261Extreme Service 22.0" (560 mm) 188-5603 376-1261Extreme Service 24.0" (610 mm) 188-5605 376-1262Moderate Service 22.0" (560 mm) 175-8802 376-1263Moderate Service 24.0" (610 mm) 175-8882 376-1264Moderate Service 26.0" (660 mm) 188-5334 376-1265Moderate Service 34.0" (865 mm) 376-1266 376-1267Double Grouser 18.0" (460 mm) 8E-4434 263-9760Double Grouser (Trapezoidal Opening) 18.0" (460 mm) 8E-4436 263-9761Double Grouser (Trapezoidal Opening) 22.0" (560 mm) 8E-4432 263-9759Chopper (Trapezoidal Opening) 20.0" (510 mm) 8E-8325 8E-8324

D7, 571, 572 TRACK SHOES8.50" (215.9 mm) PITCH – 3/4" BOLT



Extreme Service 22.0" (560 mm) 188-5603 188-5604Extreme Service 24.0" (610 mm) 188-5605 188-5606Moderate Service 20.0" (510 mm) 188-5333 188-5601Moderate Service 22.0" (560 mm) 175-8802 175-8881Moderate Service 24.0" (610 mm) 175-8882 188-5246Moderate Service 26.0" (660 mm) 188-5334 188-5602Moderate Service 34.0" (865 mm) 376-1266 376-1268Double Grouser 18.0" (460 mm) 8E-4434 8E-4435Double Grouser (Trapezoidal Opening) 18.0" (460 mm) 8E-4436 8E-4437Double Grouser (Trapezoidal Opening) 22.0" (560 mm) 8E-4432 8E-4433Triple Grouser (Center Punched Slots) 18.0" (460 mm) 8S-4468 8E-4437 (17)

Steel Mill Flat 16.0" (405 mm) 7T-1312 7T-1313Self Cleaning 34.0" (865 mm) 6P-2647 6P-2648 (18)

Chopper (Trapezoidal Opening) 20.0" (510 mm) 8E-8325 8E-8326

17 Double Grouser - Trim grouser to match triple grouser height.18 Service replaced by: 276-5411 shoe, 2- 6V-1725 bolt and 2- 9W-9058 bolt.

363

D7, 571, 572D7, 571, 572 TRACK SHOES8.00" (203.2 mm) PITCH – 3/4" BOLT

TYPE WIDTH PART NUMBERExtreme Service 22.0" (560 mm) 6Y-6402Double Grouser 18.0" (460 mm) 8E-4424Triple Grouser (Slots) 18.0" (460 mm) 8S-4468

D7, 571, 572 SPROCKETS47A3396-UP, 35N, 93N, 94N, 95N, 96N, 48A6393-UP, 40U, 91V, 92V, 16W, 64A152-UP, 44W, 45W, 72W, 65A751-UP

8.50" (215.9 mm) PITCH – 3/4" BOLT

(PER SIDE) QUANTITY PART NUMBERSprocket Hub 1 9G-0007Sprocket Segment (Tough Steel) (5 Tooth) 5 197-9679

Mud/Snow Segment (Tough Steel) (5 Tooth) 5 255-9219Bolt 20 282-3655Nut 20 7H-3608

D7, 571, 572 SPROCKETS47A1-3395, 48A1-6392, 64A1-151, 65A1-7508.50" (215.9 mm) PITCH – 3/4" BOLT

(PER SIDE) QUANTITY PART NUMBERSprocket Hub 1 3S-9993Sprocket Segment (Tough Steel) (5 Tooth) 5 197-9679

Mud/Snow Segment (Tough Steel) (5 Tooth) 5 255-9219Adapter Ring 1 3S-8252Rim (Not to be used with Hybrid Track) 1 5M-3022Bolt 20 282-3655Nut 20 7H-3608

D7, 572 SPROCKETS7M, 3T, 17A, 21A

8.00" (203.2 mm) PITCH – 3/4" BOLT

(PER SIDE) QUANTITY PART NUMBERSprocket Hub 1 3S-9140Sprocket Segment (5 Tooth) 2 3S-9138Sprocket Segment (4 Tooth) 4 3S-9139Adapter Ring 1 4S-9005Rim 1 3S-7090Bolt 26 282-3655Nut 26 7H-3608

364

D7, 571, 572D7, 571, 572 IDLERS

47A, 48A, 64A, 65A, 91E, 92E, 35N, 93N, 94N, 40U, 91V, 92V, 44W, 45W, 72W, 17A18761-UP

(PER MACHINE) QUANTITY FORMER PART NUMBER PART NUMBERIdler Assembly (Standard) 2 377-2989 9H-8489Idler Assembly (Optional) (19) 2 377-2989 377-2989Extended Wear Idler Assembly (20) 2 7T-4509 377-2989Other ComponentsBushing Assembly 2 3P-8432 3P-8432Bearing (21) 1 8P-6651 8P-6651Shaft 1 8M-0343 9M-9758Bearing Block 1 8M-0341 7G-1901Bearing Block 1 8M-0342 7G-1902Seal – Duo-Cone Group 2 6Y-0925 6Y-0925Toric Ring (21) 2 8H-2262 8H-2262Seal – Bushing O-Ring 2 4H-9105 4H-9105Seal – Shaft O-Ring 2 8F-6711 8F-6711Seal – Plug 1 1S-8947 1S-8947Bolt 12 3B-1915 3B-1915Washer 12 3B-4506 3B-4506Plug 1 2P-0347 2P-0347Pin 2 8M-0344 5M-5000Special Application SealsSeal – Duo-Cone Group (Steel Mill) 2 4S-8984 4S-8984Toric Ring (21) 2 9M-9730 9M-9730Seal – Bushing O-Ring (Steel Mill) 2 9M-9729 9M-9729Seal – Shaft O-Ring (Steel Mill) 2 8M-4390 8M-4390

D7, 571, 572 CARRIER ROLLERS47A, 48A, 64A, 65A, 35N, 93N, 94N, 40U, 91V, 92V, 16W, 44W, 45W, 91E, 72W, 93E

(PER MACHINE) QUANTITY PART NUMBERGroup 4 1P-8717Components of GroupRoller Shell 1 1P-8716Shaft 1 1P-8715Cup 2 9S-3581Cone 2 9S-3582Ring 1 7H-4574Cover 1 5M-2043Collar Assembly 1 7H-4571Plug 1 2P-0347

19 Heavy Duty (Reinforcing plates for strength).20 For use with Extended Wear Life Track.21 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

365

D7, 571, 572D7, 571, 572 CARRIER ROLLERS47A, 48A, 64A, 65A, 35N, 93N, 94N, 40U, 91V, 92V, 16W, 44W, 45W, 91E, 72W, 93E(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERBolt 3 0S-1594Seal – Duo-Cone Group 1 6Y-0925Toric Ring (22) 2 8H-2262Seal – Cover 1 2H-6338Seal – Plug 1 1S-8947Seal – Shaft O-Ring 1 1H-8720Special Application Roller GroupsGroup (Steel Mill) 4 2P-3514Seal – Duo-Cone Group (Steel Mill) 1 4S-8984Toric Ring (22) 2 9M-9730Group (Arctic) 4 255-8882


D7, 571, 572 CARRIER ROLLERS17A, 21A

(PER MACHINE) QUANTITY PART NUMBERGroup 4 – (23)

Components of GroupRoller Shell 1 9S-8321Shaft 1 4S-9692Cup 2 7H-4566Cone 2 7H-4573Ring 1 7H-4574Cover 1 9M-0632Collar Assembly 1 7H-4571Support Assembly 1 9H-7687 (24)

Plug 1 2P-0347Bolt 4 0S-1594Seal – Duo-Cone Group 1 6Y-0925Toric Ring (22) 2 8H-2262Seal – Cover 1 2H-3934Seal – Support 1 5F-3144Seal – Plug 1 1S-8947Seal – Shaft O-Ring 1 1H-8720Special Application Seals

22 Component of preceding group; quantity shown is the quantity per group.23 Upgrade to 1P-8717 group.24 Service replaced by 188-5612.

366

D7, 571, 572D7, 571, 572 CARRIER ROLLERS17A, 21A(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERSeal – Duo-Cone Group (Steel Mill) 1 4S-8984Toric Ring (25) 1 9M-9730

D7, 571, 572 TRACK ROLLERS7/8" MOUNTING HARDWARE

91E, 92E, 35N, 93N, 94N, 95N, 96N, 40U, 91V, 92V, 16W, 44W, 45W, 72W



Extended Wear Life (DF) (29) 6 118-1637 (27)


Components of GroupRoller Shell (DF) 1 8S-2931Roller Shell (SF) 1 4S-9049Extended Wear Life (DF) (29) 1 9W-8356Extended Wear Life (SF) (29) 1 9W-8359Bushing Assembly 2 1P-8787Bearing (30) 1 8P-6651Shaft 1 118-1628 (31)

End Collar 2 9S-0312 (32)

Bolt 12 2P-3201Ring 2 6H-2953Seal – Duo-Cone Group 2 6Y-0925Toric Ring (30) 2 8H-2262Seal – Bushing O-Ring 2 4H-9105Seal – Shaft O-Ring 2 8F-6711Stopper 1 7G-4332Plug 1 6Y-0473Mounting Hardware (33)

Bolt 4 1D-4629Washer 4 9H-1031Special Application Roller Groups

25 Component of preceding group; quantity shown is the quantity per group.26 8 DF rollers required for LGP machines.27 Serviced Replaced By: 1 - Roller Group (DF) 323-5928, 2 - End Cap 273-3996, 4 - Bolt 1D-4630, 4 - Washer 9H-1031.28 Serviced Replaced By: 1 - Roller Group (SF) 323-5925, 2 - End Cap 273-3996, 4 - Bolt 1D-4630, 4 - Washer 9H-1031.29 For use with Extended Wear Life Track.30 Component of preceding assembly or group; quantity shown is per assembly or group.31 Replaces former 9S-0313 shaft.32 If 9S-0313 shaft is used, use 9S-0312 (1) and 9S-0311 (1) end collar.33 These components are not included in the roller group; quantities shown are required to mount each roller.

367

D7, 571, 572D7, 571, 572 TRACK ROLLERS7/8" MOUNTING HARDWARE91E, 92E, 35N, 93N, 94N, 95N, 96N, 40U, 91V, 92V, 16W, 44W, 45W, 72W(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERDouble Flange (DF) (Steel Mill) 6 118-1631Single Flange (SF) (Steel Mill) 6 118-1630Seal – Duo-Cone Group (Steel Mill) 2 4S-8984Toric Ring (34) 2 9M-9730Seal – Bushing O-Ring (Steel Mill) 2 9M-9729Seal – Shaft O-Ring (Steel Mill) 2 8M-4390

D7, 571, 572 TRACK ROLLERS3/4" MOUNTING HARDWARE47A, 48A, 64A, 65A, 79S, 95A



Extended Wear Life (DF) (38) 6 –

Extended Wear Life (SF) (38) 6 –

Components of GroupRoller Shell (DF) 1 8S-2931Roller Shell (SF) 1 4S-9049Extended Wear Life (DF) (38) 1 9W-8356Extended Wear Life (SF) (38) 1 9W-8359Bushing Assembly 2 1P-8787Bearing (34) 1 8P-6651Shaft 1 118-1628 (39)


Bolt 12 2P-3201Ring 2 6H-2953Seal – Duo-Cone Group 2 6Y-0925Toric Ring (34) 2 8H-2262Seal – Bushing O-Ring 2 4H-9105Seal – Shaft O-Ring 2 8F-6711Stopper 1 7G-4332Plug 1 6Y-0473

34 Component of preceding assembly or group; quantity shown is per assembly or group.35 8 rollers required for LGP machines.36 Service replaced by 188-5258.37 Service replaced by 188-5257.38 For use with Extended Wear Life Track.39 Replaces former 7M-5109 shaft.40 If 7M-5109 is used, use 7M-5112 (1) and 7M-5111 (1) end collar.

368

D7, 571, 572D7, 571, 572 TRACK ROLLERS3/4" MOUNTING HARDWARE47A, 48A, 64A, 65A, 79S, 95A(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERMounting Hardware (41)

Bolt 4 1D-4609Washer 4 5H-1504Special Application SealsSeal – Duo-Cone Group (Steel Mill) 2 4S-8984Toric Ring (42) 2 9M-9730Seal – Bushing O-Ring (Steel Mill) 2 9M-9729Seal – Shaft O-Ring (Steel Mill) 2 8M-4390

D7, 571, 572 TRACK ROLLERS5/8" MOUNTING HARDWARE

17A, 21A





Components of GroupRoller Shell (DF) 1 8S-2931Roller Shell (SF) 1 4S-9049Extended Wear Life (DF) (44) 1 9W-8356Extended Wear Life (SF) (44) 1 9W-8359Bushing Assembly 2 1P-8787Bearing (42) 1 8P-6651Shaft 1 5M-1712End Collar 1 7M-3308End Collar 1 7M-3309Bolt 12 2P-3201Ring 2 6H-2953Seal – Duo-Cone Group 2 6Y-0925Toric Ring (42) 2 8H-2262Seal – Bushing O-Ring 2 4H-9105Seal – Shaft O-Ring 2 8F-6711Stopper 1 7G-4332Plug 1 6Y-0473

41 These components are not included in the roller group; quantities shown are required to mount each roller.42 Component of preceding assembly or group; quantity shown is per assembly or group.43 8 rollers required for LGP machines.44 For use with Extended Wear Life Track.

369

D7, 571, 572D7, 571, 572 TRACK ROLLERS5/8" MOUNTING HARDWARE17A, 21A(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERMounting Hardware (45)

Bolt 4 0S-2318Washer 4 3B-4510Special Application SealsSeal – Duo-Cone Group (Steel Mill) 2 4S-8984Toric Ring (46) 2 9M-9730Seal – Bushing O-Ring (Steel Mill) 2 9M-9729Seal – Shaft O-Ring (Steel Mill) 2 8M-4390

D7 END GUIDING GUARDS47A, 48A, 79A, 95A, 91E, 92E, 35N, 93N, 94N, 91V, 92V, 44W, 45W, 72W

(PER MACHINE) QUANTITY PART NUMBERFront (Outer LH, Inner RH)Guard Assembly 1 9S-1044Wear Strip 1 9S-1046Bolt 4 0S-1592Lock Washer 4 3B-4510Front (Outer RH, Inner LH)Guard Assembly 1 9S-1043Wear Strip 1 9S-1045Bolt 4 0S-1592Lock Washer 4 3B-4510Rear (Outer RH)Guard Assembly 1 9S-1044Wear Strip 1 9S-1046Bolt 4 0S-1592Lock Washer 4 3B-4510Rear (Outer LH)Guard Assembly 1 9S-1043Wear Strip 1 9S-1045Bolt 4 0S-1592Lock Washer 4 3B-4510

45 These components are not included in the roller group; quantities shown are required to mount each roller.46 Component of preceding assembly or group; quantity shown is per assembly or group.

370

D7, 571, 572D7 TRACK ROLLER GUARDS

PARTIAL91V, 92V

(PER MACHINE) QUANTITY PART NUMBERGuard AssembliesInner RH 1 6P-7625Inner LH 1 6P-7626Outer RH 1 6P-7627Outer LH 1 6P-7627

D7 TRACK ROLLER GUARDSFULL91V, 92V


D7 TRACK ROLLER GUARDSFULL

93N, 94N

(PER MACHINE) QUANTITY PART NUMBERGuard AssembliesInner RH 1 9S-1669Inner LH 1 9S-1670Outer RH 1 9S-1671Outer LH 1 9S-1671

571, 572 TRACK ROLLER GUARDSFULL16W


571, 572 TRACK ROLLER GUARDSFULL40U

(PER MACHINE) QUANTITY PART NUMBERGuard AssembliesInner RH 1 6P-8803

371

D7, 571, 572571, 572 TRACK ROLLER GUARDSFULL40U(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERGuard AssembliesInner LH 1 6P-8804Outer RH 1 6P-8806Outer LH 1 6P-8806

571, 572 TRACK ROLLER GUARDSFULL95N

(PER MACHINE) QUANTITY PART NUMBERGuard AssembliesInner RH 1 9S-1669Inner LH 1 9S-1670Outer RH 1 9S-1671Outer LH 1 9S-1671

D7 FINAL DRIVE GUARDS47A, 48A, 79A, 95A, 91E, 92E, 35N, 93N, 94N, 91V, 92V

(PER MACHINE) QUANTITY PART NUMBERRH 1 7M-1890LH 1 7M-1889Bolts 8 1D-4586Lock Washer 8 4D-3704

372

D8, 583D8, CLASSIC SEALED AND LUBRICATED TRACK

LONG AND SHORT UNDERCARRIAGE (7 & 6 ROLLER)22A, 35A, 36A, 46A, 68A, 66V, 76V, 77V9.00" (228.6 mm) PITCH – 7/8" BOLT


Components of Link AssemblyTrack LinksRH Master Links (Split Master Complete) 1 188-5712

LH Master Links (Split Master Complete) 1 188-5711RH Regular 40 188-5531LH Regular 40 188-5532Other ComponentsPin 41 188-5710Bushing 41 188-5658Seal Assembly (Rigid) 82 259-7065Thrust Ring 82 188-5689Stopper 41 7G-4332Plug 41 6Y-0473Track HardwareBolt (2) 160 188-5639Nut (2) 160 188-5857Master Bolt (Included with link assembly) 4 188-5640

D8, 583 CLASSIC SEALED TRACKLONG AND SHORT UNDERCARRIAGE (7 & 6 ROLLER)22A, 35A, 36A, 46A, 68A, 66V, 76V, 77V, 38A, 61A, 79V



Components of Link AssemblyTrack LinksRH Master Links (Split Master Complete) 1 188-5712

LH Master Links (Split Master Complete) 1 188-5711RH Regular 40 188-5531LH Regular 40 188-5532Other ComponentsPin 41 1M-1455Bushing 41 8M-2619 (4)

Seal 164 8M-2620

1 If 39 section link assembly is required, order 188-5310 and remove two sections.2 Not part of link assembly; required to assemble track group.3 Sealed link assembly is no longer offered. Sealed and Lubricated link assembly 41 sections 188-5310 is available. If 39 or 42 section link

assemblies are required, order 188-5310 and add or remove appropriate number of sections.4 Serviced Replaced By 290-0844.

373

D8, 583D8, 583 CLASSIC SEALED TRACKLONG AND SHORT UNDERCARRIAGE (7 & 6 ROLLER)22A, 35A, 36A, 46A, 68A, 66V, 76V, 77V, 38A, 61A, 79V9.00" (228.6 mm) PITCH – 7/8" BOLT(Cont'd.)

QUANTITY PART NUMBERTrack HardwareBolt (5) 160 188-5639Nut (5) 160 188-5857Master Bolt (Included with link assembly) 4 188-5640

D8 SEALED & LUBRICATED TRACKD8 (39 SECTION: 6 ROLLER); D8 (41 SECTION: 7 ROLLER)

22A, 35A, 36A, 46A, 68A, 66V, 76V, 77V9.00" (228.6 mm) PITCH – 7/8" BOLT

PART NUMBER 39 SECTION 41 SECTIONLink Assembly – (Quantity 2) 9W-8938 (6) 9W-8937 (7)

Components of Link AssemblyTrack LinksRH Pin End Master 7S-9601 (8) 1 1LH Pin End Master 7S-9602 (9) 1 1RH Bushing End Master 7S-9603 (8) 1 1LH Bushing End Master 7S-9604 (9) 1 1RH Regular 7S-9181 (10) 38 40LH Regular 7S-9182 (11) 38 40Other ComponentsPin 2P-9486 (12) 39 41Bushing 2P-9484 (13) 39 41Seal Assembly (Rigid) 248-1539 78 82Thrust Ring 9W-3563 (14) 78 82Stopper 7G-4332 39 41Plug 6Y-0473 39 41Track Hardware (5)

Bolt 7H-3599 152 160Nut 2S-2140 152 160Master Bolt 8S-0395 4 4Special Sets/Groups

5 Not part of link assembly; required to assemble track group.6 Serviced Replaced By Classic Sealed and Lubricated Link Assembly 188-5310 and remove 2 sections.7 Serviced Replaced By Classic Link Assembly 188-5310.8 Service Replaced by 188-5712.9 Service Replaced by 188-5711.10 Service Replaced by 188-5531.11 Service Replaced by 188-5532.12 Service Replaced by 188-5710.13 Serviced Replaced By Classic 188-5658.14 Service replaced by 188-5689.

374

D8, 583D8 SEALED & LUBRICATED TRACKD8 (39 SECTION: 6 ROLLER); D8 (41 SECTION: 7 ROLLER)22A, 35A, 36A, 46A, 68A, 66V, 76V, 77V9.00" (228.6 mm) PITCH – 7/8" BOLT(Cont'd.)

PART NUMBER 39 SECTION 41 SECTIONSeal Set (82 Seal Assemblies) 250-2336 1 1Bushing and Seal Group (41 Sections) 9W-8936 1 1

D8, 583 PIPELAYER SEALED TRACKD8 (39, 41 SECTIONS) 22A, 35A, 36A, 46A, 68A, 66V, 76V, 77V 583 (42 SECTION) 38A, 61A, 79V

9.00" (228.6 mm) PITCH – 7/8" BOLT


Components of Link AssemblyTrack LinksRH Pin End Master 1 7S-9601LH Pin End Master 1 7S-9602RH Bushing End Master 1 7S-9603LH Bushing End Master 1 7S-9604RH Regular 40 7S-9181 (16)

LH Regular 40 7S-9182 (17)

Other ComponentsPin 41 1M-1455Bushing 41 8M-2619Seal 164 8M-2620Track Hardware (18)

Bolt 160 7H-3599Nut 160 2S-2140Master Bolt 4 8S-0395Special Sets/GroupsPin and Bushing Group (41 Sections) 1 2P-6026

D8, 583 SEALED TRACKD8: 13A, 14A, 15A; 583: 16A

8.00" (203.2 mm) PITCH – 3/4" BOLT

QUANTITY PART NUMBERLink Assembly – 42 Section 2 –Components of Link AssemblyTrack Links

15 Service Replaced By 188-5310 Classic Sealed and Lubricated Link Assembly. If 39, 42 section link assemblies are required order 188-5310 and add or remove appropriate number of sections.

16 Service Replaced by 188-5531.17 Service Replaced by 188-5532.18 Not part of link assembly; required to assemble track group.

375

D8, 583D8, 583 SEALED TRACKD8: 13A, 14A, 15A; 583: 16A8.00" (203.2 mm) PITCH – 3/4" BOLT(Cont'd.)

QUANTITY PART NUMBERRH Regular 42 1S-8839LH Regular 42 1S-8840Other ComponentsPin 41 4B-6620Master Pin 1 8M-7229Bushing 41 8M-7230Master Bushing 1 5M-2035Seal (Spring Washer) 168 8M-7231Spacer 2 8M-7232Track Hardware (19)

Bolt 168 7H-3598Nut 168 1S-1860

D8, 583 CLASSIC TRACK SHOES*9.00" (228.6 mm) PITCH – 7/8" BOLT



Super Extreme Service (20) 22.0" (560 mm) 188-5617 188-5618Super Extreme Service (20) 24.0" (610 mm) 188-5313 188-5314Extreme Service 20.0" (510 mm) 281-6370 281-6371Extreme Service 22.0" (560 mm) 188-5617 188-5618Extreme Service 24.0" (610 mm) 188-5313 188-5314Extreme Service (21) 26.0" (660 mm) 188-5613 188-5614Extreme Service (21) 28.0" (710 mm) 188-5615 188-5616Extreme Service 30.0" (760 mm) 281-6372 315-6693Moderate Service (20) 22.0" (560 mm) 188-5617 188-5618Moderate Service 24.0" (610 mm) 188-5311 188-5312Moderate Service 26.0" (660 mm) 188-5613 188-5614Moderate Service 28.0" (710 mm) 188-5615 188-5616Moderate Service (Clipped Grouser) 30.0" (760 mm) 281-6373 281-6374

* When replacing a Genuine ES shoe with Classic ES shoe, or a Genuine MS shoe with a Classic MS shoe, or a Genuine ES shoe with a Classic MS shoe, or aGenuine MS shoe with a Classic ES shoe a POTENTIAL INTERFERENCE MAY OCCUR. When replacing a Genuine SES shoe with a Classic ES shoe INTERFER-ENCE WILL OCCUR. Grinding/machine of the leading or trailing edge might/will be required in order to provide clearance between the adjacent shoes. If morethan one genuine shoe must be replaced, position the shoes on the chain together. This will provide that any required grinding/machining will only be requiredat one location. Refer to Service Magazine titled "Genuine Track Shoes are being replaced with Classic Track Shoes" Media No. SEPD0872-00 dated January 22,2007.

19 Not Part of Link Assembly; required to assemble track group.20 Serviced Replaced by Classic Extreme Service Shoe.21 Serviced Replaced by Classic Moderate Service Shoe.

376

D8, 583D8 SPROCKETS

77V3958 - UP9.00" (228.6 mm) PITCH

(PER SIDE) QUANTITY PART NUMBERSprocket Hub 1 6P-3596Sprocket Group (Contains 9 segments, no hardware)(3 Tooth) (Classic)

1 188-5641

Bolt 27 9S-2727Nut 27 7H-3609

D8 SPROCKETS76V, 77V1-3957

9.00" (228.6 mm) PITCH


1 188-5641

Bolt 27 9S-2727Nut 27 7H-3609

D8 SPROCKETS35A, 36A, 46A

9.00" (228.6 mm) PITCH


1 188-5641

Rim 1 1S-8725Bolt 27 9S-2727 (22)

Nut 27 7H-3609

D8 SPROCKETSOPTIONAL

13A, 14A, 15A, 1H, 8R, 2U9.00" (228.6 mm) PITCH

(PER MACHINE) QUANTITY PART NUMBERSprocket Segment (5 Tooth) 5 5S-0122Rim 1 2M-8810Bolt 20 3S-7837Nut 20 7H-3609

22 For machines with serial numbers 36A4649-5022, 46A2234-2787, 46A12585-17168, use 3S-7837 bolt.

377

D8, 583D8 SPROCKETS13A, 14A, 15A, 1H, 8R, 2U8.00" (203.2 mm) PITCH

(PER MACHINE) QUANTITY PART NUMBERSprocket Segment (2 Tooth) 7 4S-9112Bolt 21 3S-7837Nut 21 7H-3609

583 SPROCKETS78V

9.00" (228.6 mm) PITCH


1 188-5641

Bolt 27 9S-2727Nut 27 7H-3609

583 SPROCKETS38A, 61A1-UP

9.00" (228.6 mm) PITCH


1 188-5641

Rim 1 1S-8725Bolt 27 9S-2727 (23)

Nut 27 7H-3609

D8, 583 CLASSIC IDLERS76V5006-UP, 61A627-UP, 36A5151-UP, 46A20428-UP, 76V, 77V, 78VFits low position idlers with reference bearing blocks 9S-4325/26.

(PER MACHINE) QUANTITY PART NUMBERIdler Group (Complete) 2 200-9238 (24)

Idler Assembly 2 188-5610

D8, 583 IDLERS76V5006-UP, 61A627-UP, 36A5151-UP, 46A20428-UP, 76V, 77V, 78V


Other Components

23 For machines with serial number 61A199-400, use 3S-7837 bolt.24 Fits low position idlers with reference bearing blocks 9S-4325/26.25 Service Replaced by Classic part number 188-5610.

378

D8, 583D8, 583 IDLERS76V5006-UP, 61A627-UP, 36A5151-UP, 46A20428-UP, 76V, 77V, 78V(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERBushing Assembly 2 6P-2083Bearing (26) 2 8P-6650Shaft 1 9S-4324 (27)

Bearing Block 1 9S-4325 (27)

Bearing Block 1 9S-4326 (27)

Seal – Duo-Cone Group 2 9W-2142Toric Ring (26) 2 8H-2265Seal – Bushing O-Ring 2 5F-3106Seal – Shaft O-Ring 2 1H-5728Seal – Plug 1 1S-8947Bolt 12 0S-1585Washer 12 3B-4508Plug 1 2P-0347Spacer 4 7M-8056Lock 2 1S-3513Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 8S-5656Toric Ring (26) 2 8S-5653

D8, 583 IDLERS35A, 38A, 36A1-5156, 46A1-20427, 61A1-626, 77V1-5006


Other ComponentsBushing Assembly 2 6P-2083Bearing (26) 2 8P-6650Shaft 1 5M-1245Bearing Block 1 2M-7099Bearing Block 1 2M-7100Seal – Duo-Cone Group 2 9W-2142Toric Ring (26) 2 8H-2265Seal – Bushing O-Ring 2 5F-3106Seal – Shaft O-Ring 2 1H-5728Seal – Plug 1 1S-8947Bolt 12 0S-1585Washer 12 3B-4508

26 Component of preceding assembly or group; quantity shown is quantity per assembly or group.27 For low position idlers only.28 Service Replaced by Classic part number 188-5610.

379

D8, 583D8, 583 IDLERS35A, 38A, 36A1-5156, 46A1-20427, 61A1-626, 77V1-5006(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERPlug 1 2P-0347Spacer 4 7M-8056Lock 2 1S-3513Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 8S-5656Toric Ring (29) 2 8S-5653

D8, 583 CLASSIC CARRIER ROLLERS14A, 15A, 16A, 35A, 38A, 61A, 36A, 46A1, 76V, 77V, 78V

INSIDE MOUNT/OUTSIDE MOUNT

(PER MACHINE) QUANTITY PART NUMBERCarrier Roller Group 2 188-5612

D8, 583 CARRIER ROLLERSOUTSIDE MOUNT

36A3500-UP, 46A3889-UP, 76V, 77V, 78V

(PER MACHINE) QUANTITY PART NUMBERGroup 4 8P-6256 (30)

Components of GroupRoller Shell 1 8P-6245 (30)

Shaft 1 8P-6255 (31)

Cup 2 7K-5448Cone 2 7K-5449Ring 1 9H-7759Cover 1 5M-2043Collar Assembly 1 9H-9414Plug 1 2P-0347Bolt 4 0S-1594Seal – Duo-Cone Group 1 6Y-0925Toric Ring (32) 2 8H-2262Seal – Cover 1 2H-6338Seal – Plug 1 1S-8947Seal – Shaft O-Ring 1 1H-5728Special Application Seals

29 Component of preceding assembly or group; quantity shown is quantity per assembly or group.30 Service Replaced by Classic Carrier Roller Group part number 188-5612.31 No longer serviced.32 Component of preceding group; quantity shown is the quantity per group.

380

D8, 583D8, 583 CARRIER ROLLERSOUTSIDE MOUNT36A3500-UP, 46A3889-UP, 76V, 77V, 78V(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERSeal – Duo-Cone Group (Steel Mill) 1 4S-8984Toric Ring (33) 2 9M-9730

D8, 583 CARRIER ROLLERSINSIDE MOUNT

14A, 15A, 16A, 35A, 38A, 61A, 36A1-3449, 46A1-3888


Components of GroupRoller Shell 1 9S-8304 (34)

Shaft 1 5M-1246 (34)

Cup 2 6Y-7652Cone 2 4B-7255Ring 1 9H-7759Cover 1 5M-1669Collar Assembly 1 9H-9414Support Assembly 1 9H-7687 (34)

Plug 1 2P-0347Bolt 3 0S-1594Seal – Duo-Cone Group 1 6Y-0925Toric Ring (33) 2 8H-2262Seal – Cover 1 2H-3928Seal – Support 1 5F-3144Seal – Plug 1 1S-8947Seal – Shaft O-Ring 1 1H-5728Special Application SealsSeal – Duo-Cone Group (Steel Mill) 1 4S-8984Toric Ring (33) 2 9M-9730

D8, 583 CLASSIC TRACK ROLLERS35A, 36A, 38A, 46A, 61A, 76A, 77V, 78V

(PER MACHINE) QUANTITY PART NUMBERDouble Flange (DF) (1" Mounting Hardware) 8 (35) 188-5608Single Flange (SF) (1" Mounting Hardware) 6 188-5607Double Flange (DF) (7/8" Mounting Hardware) 8 (35) 281-6386

33 Component of preceding group; quantity shown is the quantity per group.34 Service Replaced by Classic Carrier Roller Group part number 188-5612.35 6 Double Flange roller required for 6 roller frame machines.

381

D8, 583D8, 583 CLASSIC TRACK ROLLERS35A, 36A, 38A, 46A, 61A, 76A, 77V, 78V(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) (7/8" Mounting Hardware) 6 281-6380Mounting Hardware (36)

Bolt (1") 4 1D-4640Washer (1") 4 3K-5235Bolt (7/8") 4 1D-4630Washer (7/8") 4 3B-4514

D8, 583 TRACK ROLLERS35A, 36A, 38A, 46A, 61A, 76A, 77V, 78V

(PER MACHINE) QUANTITY PART NUMBERDouble Flange (DF) (7/8" Mounting Hardware) 8 (37) 9P-3309 (38)

Double Flange (DF) (1" Mounting Hardware) 8 (37) 6P-4898 (39)

Single Flange (SF) (7/8" Mounting Hardware) 6 9P-3308 (40)

Single Flange (SF) (1" Mounting Hardware) 6 6P-4897 (41)

Components of GroupRoller Shell (DF) 1 6P-3307 (42)

Roller Shell (SF) 1 6P-3303 (43)

Bushing Assembly 2 2P-8052 (44)

Bearing (45) 1 8P-6650Shaft 1 5M-1247 (44)

End Collar (7/8" Mounting Hardware) 2 4S-8099 (46)

End Collar (1" Mounting Hardware) 2 7S-7936 (47)

Bolt 12 0S-1585Bolt 12 3B-4508Pin 2 1T-0068Seal – Duo-Cone Group 2 9W-2142Toric Ring (45) 2 8H-2265Seal – Bushing O-Ring 2 5F-3106Seal – Shaft O-Ring 2 1H-7339

36 These components are not included in the roller group; quantities shown are required to mount each roller.37 6 Double Flange rollers required for 6 roller frame machines.38 Serviced Replaced By Classic Roller Group part number 281-6386.39 Serviced Replaced By Classic Roller Group part number 188-5608.40 Serviced Replaced By Classic Roller Group part number 281-6380.41 Serviced Replaced By Classic Roller Group part number 188-5607.42 Serviced Replaced By Classic Roller Groups part number (188-5608 with 1" mounting bolts) or (281-6386 with 7/8" mounting bolts).43 Serviced Replaced By Classic Roller Groups part number (188-5607 with 1" mounting bolts) or (281-6380 with 7/8" mounting bolts).44 Serviced Replaced By one of the following Classic Roller Group part numbers: (188-5608 DF with 1" mounting bolts); (188-5607 SF with 1"

mounting bolts); (281-6386 DF with 7/8" mounting bolts); (281-6380 SF with 7/8" mounting bolts).45 Component of preceding assembly or group; quantity shown is per assembly or group.46 Serviced Replaced By Classic Roller Group part number (281-6386 Double Flange) or (281-6380 Single Flange).47 Serviced Replaced By Classic Roller Group part number (188-5608 Double Flange) or (188-5607 Single Flange).

382

D8, 583D8, 583 TRACK ROLLERS35A, 36A, 38A, 46A, 61A, 76A, 77V, 78V(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERSeal – Plug O-Ring 1 1S-8947Plug 1 2P-0347Mounting Hardware (48)

Bolt (7/8") 4 1D-4630Bolt (1") 4 1D-4640Washer (7/8") 4 3B-4514Washer (1") 4 3K-5234Special Application Roller GroupsDouble Flange (DF) (Arctic) (1" Mounting Hardware) 8 (49) 7G-8809 (50)

Single Flange (SF) (Arctic) (1" Mounting Hardware) 6 7G-8810 (51)

Seal – Duo-Cone Group 2 8S-5656Toric Ring (52) 2 8S-5653Seal – Bushing O-Ring 2 4S-5898Seal – Shaft O-Ring 2 5M-3038

D8, 583 TRACK ROLLERS14A, 15A, 16A8.00" PITCH



Components of GroupRoller Shell (DF) 1 – (53)

Roller Shell (SF) 1 8H-5376Bushing Assembly 2 8H-5377Bearing (52) 1 – (53)

Shaft 1 5M-1712End Collar (Inner) 1 8H-5381End Collar (Outer) 1 8H-5380Bolt 12 0S-1585Washer 12 3B-4508Ring 2 6H-6237Seal – Duo-Cone Group 1 6Y-0925

48 These components are not included in the roller group; quantities shown are required to mount each roller.49 6 Double Flange rollers required for 6 roller frame machines.50 Serviced Replaced By the following Roller Group and Seals: 1 - Classic Roller Group (DF) 188-5608; 4 - Toric Ring 8S-5653; 2 - Bushing O-

Ring Seal 4S-5898; 2 - Shaft O-Ring Seal 5M-3038; 1 - Plug O-Ring Seal 2P-2975.51 Serviced Replaced By the following Roller Group and Seals: 1 - Classic Roller Group (DF) 188-5607; 4 - Toric Ring 8S-5653; 2 - Bushing O-

Ring Seal 4S-5898; 2 - Shaft O-Ring Seal 5M-3038; 1 - Plug O-Ring Seal 2P-2975.52 Component of preceding assembly or group; quantity shown is per assembly or group.53 No Longer Serviced.

383

D8, 583D8, 583 TRACK ROLLERS14A, 15A, 16A8.00" PITCH(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERToric Ring (54) 2 8H-2262Seal – Bushing O-Ring 2 5H-6734Seal – Shaft O-Ring 2 8F-6711Plug 1 2P-0347Mounting Hardware (55)

Bolt 4 1D-4630Washer 4 3B-4514Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 3P-1848Toric Ring (54) 2 3P-1847Seal – Bushing O-Ring 2 4S-5898Seal – Shaft O-Ring 2 5M-3038

D8 END GUIDING GUARDS38A3864-UP, 46A6151-UP, 76V, 77V


54 Component of preceding assembly or group; quantity shown is per assembly or group.55 These components are not included in the roller group; quantities shown are required to mount each roller.

384

D8, 583D8 END GUIDING GUARDS

36A3500-3863, 46A3889-6150

(PER MACHINE) QUANTITY PART NUMBERFront (Outer LH, Inner RH)Guard Assembly 1 – (56)

Wear Strip 1 5S-0161Bolt 4 0S-1973Lock Washer 4 3B-4514Front (Outer RH, Inner LH)Guard Assembly 1 – (56)

Wear Strip 1 5S-0161Bolt 4 0S-1973Lock Washer 4 3B-4514Rear (Outer RH)Guard Assembly 1 – (56)

Wear Strip 1 5S-0161Bolt 4 0S-1973Lock Washer 4 3B-4514Rear (Outer LH)Guard Assembly 1 – (56)

Wear Strip 1 5S-0160Bolt 4 0S-1973Lock Washer 4 3B-4514

D8 TRACK ROLLER GUARDS76V, 77V

(PER MACHINE) QUANTITY PART NUMBERFront (Guard Assemblies)Inner RH 1 6P-7693Inner LH 1 6P-7692Outer RH 1 6P-7692Outer LH 1 6P-7693Rear (Guard Assemblies)Inner RH 1 6P-7691Inner LH 1 6P-7694Outer RH 1 6P-7693Outer LH 1 6P-7692

56 No Longer Serviced.

385

D8, 583D8, 583 FINAL DRIVE GUARDS36A3916-UP, 46A6659-UP, 61A, 76V, 77V, 78V

(PER MACHINE) QUANTITY PART NUMBERRH 1 6P-0549LH 1 6P-0549Bolts 12 1S-0454Lock Washer 12 3B-4514

386

D9, 594D9 SEALED AND LUBRICATED TRACK*

38 SECTION: 18A2451-UP, 19A1808-UP, 34A, 49A, 50A 39 SECTION: 66A, 90J, 91J, 29N, 30N, 90V, 97V, 98V, 99V, 12U10.25" (260.4 mm) PITCH – 1" BOLT

PART NUMBER 38 SECTION 39 SECTIONLink Assembly – 39 Section – (1) 9W-8320Components of Link AssemblyTrack LinksRH Pin End Master 8S-0943 1 1LH Pin End Master 8S-0944 1 1RH Bushing End Master 8E-4057 1 1LH Bushing End Master 8E-4058 1 1RH Regular 8E-4055 37 38LH Regular 8E-4056 37 38Other ComponentsPin 2P-9423 38 39Bushing 2P-9424 38 39Seal Assembly (Rigid) 248-1537 76 78Thrust Ring 2P-9419 76 78Stopper 7G-4332 38 39Plug 6Y-0473 38 39Track Hardware (2)

Bolt 2M-5657 148 152Nut 1S-6421 148 152Master Bolt 8S-1723 4 4Special Sets/GroupsSeal Set (78 Seal Assemblies) 250-2337 1 1Bushing and Seal Group (39 Sections) 9W-8381 1 1

* Order these parts for D9D's converted to 10.25" pitch track.

D9, 594 PIPELAYER SEALED TRACK*D9 (38 SECTION): 18A2451-UP, 19A1808-UP, 34A, 49A, 50A D9 (39 SECTION): 66A,

90J, 91J, 29N, 30N, 90V, 97V, 98V, 99V, 12U 594 (42 SECTION): 62H10.25" (260.4 mm) PITCH – 1" BOLT


Components of Link AssemblyTrack LinksRH Pin End Master 1 8S-0943LH Pin End Master 1 8S-0944RH Bushing End Master 1 8E-4057LH Bushing End Master 1 8E-4058

1 Order 39 Section – 9W-8320 Link Assembly and remove 1-section.2 Not part of link assembly; required to assemble track group3 If 38, 42 section link assemblies are required, order 8S-1731 and add or remove appropriate number of sections.

387

D9, 594D9, 594 PIPELAYER SEALED TRACK*D9 (38 SECTION): 18A2451-UP, 19A1808-UP, 34A, 49A, 50A D9 (39 SECTION): 66A,90J, 91J, 29N, 30N, 90V, 97V, 98V, 99V, 12U 594 (42SECTION): 62H10.25" (260.4 mm) PITCH – 1" BOLT(Cont'd.)

QUANTITY PART NUMBERRH Regular 38 8E-4055LH Regular 38 8E-4056Other ComponentsPin 39 2M-5652Bushing 39 2S-0253Seal 156 1S-4446Track Hardware (4)

Bolt 152 2M-5657Nut 152 1S-6421Master Bolt 4 8S-1723* Order these parts for D9Ds converted to 10.25" pitch.

D9, 594 TRACK SHOES10.25" (260.4 mm) PITCH - 1" BOLT



Super Extreme Service (5) 24.0" (610 mm) 3T-5971 3T-5970Super Extreme Service (5) 27.0" (685 mm) 6T-5857 6T-5858Extreme Service 20.0" (510 mm) 3T-8557 3T-8556Extreme Service 24.0" (610 mm) 3T-8559 3T-8558Extreme Service 27.0" (685 mm) 3T-8561 3T-8560Extreme Service 30.0" (760 mm) 3T-8563 3T-8562Extreme Service (6) 34.0" (865 mm) 3T-8565 3T-8564Extreme Service (Clipped) (6) 40.0" (1015 mm) 3T-8497 3T-8494

D9 SPROCKETS90J, 91J, 29N, 30N, 90V, 97V, 98V, 99V, 12U

10.25" (260.4 mm) PITCH

(PER SIDE) QUANTITY PART NUMBERSprocket Hub 1 3P-4866Sprocket Hub (Riveted Mud Guard) 1 3P-3327Sprocket Segment (3 Tooth) 9 6T-6781Bolt 27 5P-0233 (7)

Nut 27 2M-5656

4 Not part of link assembly; required to assemble track group5 Use 3T-6308 bolts with Super Extreme Service Shoes6 For use on 594 pipelayers only.7 Use 9S-2728 bolts for machine serial numbers 90J1-109 and 91J1-109.

388

D9, 594D9 SPROCKETS

66A12746-UP10.25" (260.4 mm) PITCH

(PER SIDE) QUANTITY PART NUMBERSprocket Hub 1 3P-4866Sprocket Segment (3 Tooth) 9 6T-6781Bolt 27 5P-0233Nut 27 2M-5656

D9 SPROCKETS66A6155-12745

10.25" (260.4 mm) PITCH

(PER SIDE) QUANTITY PART NUMBERSprocket Hub (Riveted Mud Guard) 1 3P-3327Sprocket Segment (3 Tooth) 9 6T-6781Bolt 27 5P-0233 (8)

Nut 27 2M-5656

D9 SPROCKETS66A4606-6154

10.25" (260.4 mm) PITCH

(PER SIDE) QUANTITY PART NUMBERSprocket Hub (Riveted Mud Guard) 1 3P-3327Sprocket Segment (3 Tooth) 9 6T-6781Bolt 27 3S-7461Nut 27 2M-5656

594 SPROCKETS96V, 62H51-UP

10.25" (260.4 mm) PITCH

(PER SIDE) QUANTITY PART NUMBERSprocket Hub 1 3P-6123Sprocket Segment (3 Tooth) 9 6T-6781Bolt 27 9S-2728Nut 27 2M-5656

594 SPROCKETS62H1-50

10.25" (260.4 mm) PITCH

(PER SIDE) QUANTITY PART NUMBERSprocket Hub 1 3P-6123Sprocket Segment (3 Tooth) 9 6T-6781

8 Use 9S-2728 bolts for machine serial numbers 66A6155-12655.

389

D9, 594594 SPROCKETS62H1-5010.25" (260.4 mm) PITCH(Cont'd.)(PER SIDE) QUANTITY PART NUMBERBolt 27 3S-7461Nut 27 2M-5656

D9, 594 IDLERS


PART NUMBER PART NUMBERIdler Assembly 2 5S-1532 5S-1532Other ComponentsBushing Assembly 1 8P-5434 8P-5434Bearing (9) 2 8P-5430 8P-5430Shaft 1 5M-1667 1S-3514Bearing Block 1 9H-6981 1S-3512Bearing Block 1 9H-6982 1S-3511Seal – Duo-Cone Group 2 9W-2201 9W-2201Toric Ring (9) 2 6H-1309 6H-1309Seal – Bushing O-Ring 2 2H-3935 2H-3935Seal – Shaft O-Ring 2 2H-3931 2H-3931Seal – Plug 1 1S-8947 1S-8947Plug 1 2P-0347 2P-0347Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 3P-1848 3P-1848Toric Ring (9) 2 3P-1847 3P-1847Seal – Bushing O-Ring 2 9N-2693 9N-2693Seal – Shaft O-Ring 2 6L-9965 6L-9965

D9, 594 CARRIER ROLLERS66A, 90J, 91J, 62H, 29N, 30N, 90V, 96V, 97V, 98V, 99V, 12U


PART NUMBER PART NUMBERGroup 4 – (10) 3P-3403Components of GroupRoller Shell 1 9S-8322 3P-3399Shaft 1 – 3P-3402Cup 2 5P-9532 1P-2636Cone 1 7H-2621 1P-2662Ring 1 8F-0737 8F-0737

9 Component of preceding assembly or group; quantity shown is quantity per assembly or group.10 Upgrade to 3P-3403 Group.

390

D9, 594D9, 594 CARRIER ROLLERS66A, 90J, 91J, 62H, 29N, 30N, 90V, 96V, 97V, 98V, 99V, 12U(Cont'd.)


PART NUMBER PART NUMBERSupport 1 7H-2623 7H-2623Cover 1 5M-1669 5M-1669Dowel 4 9H-7078 9H-7078Seal – Duo-Cone Group 1 9W-2142 9W-2142Toric Ring (11) 2 8H-2265 8H-2265Seal – Cover 1 2H-3928 2H-3928Seal – Inner Support 1 2H-3935 2H-3935Seal – Shaft O-Ring 1 6H-3977 6H-3977Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 8S-5656 8S-5656Toric Ring (11) 2 8S-5653 8S-5653

D9, 594 TRACK ROLLERS1" MOUNTING HARDWARE

12U, 29N, 30N, 62H49-UP, 66A5855-UP, 90J, 90V, 91J, 96V, 97V, 99V

(PER MACHINE) QUANTITY PART NUMBERDouble Flange (DF) 8 (12) 8P-5604

Single Flange (SF) 6 (12) 8P-5605Components of GroupRoller Shell (DF) 1 8P-5485Roller Shell (SF) 1 8P-5486Bushing Assembly 2 8P-5434Bearing (13) 1 8P-5430Bushing Assembly (.040" Oversize) 2 8P-5429Shaft 1 4M-0578End Collar 2 8S-0009Bolt 12 0S-1587Washer 12 3H-7654Ring 2 4S-8072Pin 1 1T-0068Seal – Duo-Cone Group 2 9W-2201Toric Ring (13) 2 6H-1309Seal – Bushing O-Ring 2 2H-3935Seal – Shaft O-Ring 2 2H-3931Seal – Plug O-Ring 1 1S-8947Plug 1 2P-0347

11 Component of preceding group; quantity shown is the quantity per group.12 594 Pipelayers require 10 double flange rollers and 6 single flange rollers.13 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

391

D9, 594D9, 594 TRACK ROLLERS1" MOUNTING HARDWARE12U, 29N, 30N, 62H49-UP, 66A5855-UP, 90J, 90V, 91J, 96V, 97V, 99V(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERMounting Hardware (14)

Bolt 4 1D-4640Washer 4 3K-5234Special Application Groups/Seals (Low/High Temperature)Double Flange (DF) 8 (15) 7G-8807Single Flange (SF) 6 (15) 7G-8808Seal – Duo-Cone Group 2 3P-1848Toric Ring (16) 2 3P-1847Seal – Bushing O-Ring 2 9N-2693Seal – Shaft O-Ring 2 6L-9965

D9, 594 TRACK ROLLERS7/8" MOUNTING HARDWARE62H1-48, 66A1-66A5854

(PER MACHINE) QUANTITY PART NUMBERDouble Flange (DF) 8 (15) 7G-2763Single Flange (SF) 8 (15) 7G-2762Components of GroupRoller Shell (DF) 1 8P-5485Roller Shell (SF) 1 8P-5486Bushing Assembly 2 8P-5434Bearing (16) 1 8P-5430Bushing Assembly (.040" Oversize) 2 8P-5429Shaft 1 4M-0578End Collar 2 4S-8101Bolt 12 0S-1587Washer 12 3H-7654Ring 2 4S-8072Pin 1 1T-0068Seal – Duo-Cone Group 2 9W-2201Toric Ring (16) 2 6H-1309Seal – Bushing O-Ring 2 2H-3935Seal – Shaft O-Ring 2 2H-3931Seal – Plug O-Ring 1 1S-8947Plug 1 2P-0347

14 These components are not included in the roller group; quantities shown are required to mount each roller.15 594 Pipelayers require 10 double flange rollers and 6 single flange rollers.16 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

392

D9, 594D9, 594 TRACK ROLLERS7/8" MOUNTING HARDWARE62H1-48, 66A1-66A5854(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERMounting Hardware (17)

Bolt 4 1D-4630Washer 4 9H-1031Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 3P-1848Toric Ring (18) 2 3P-1847Seal – Bushing O-Ring 2 9N-2693Seal – Shaft O-Ring 2 6L-9965

D9, 594 END GUIDING GUARDS12U, 29N, 30N, 62H, 66A, 90J, 90V, 91J, 96V, 97V, 98V, 99V

(PER MACHINE) QUANTITY PART NUMBERFront (Outer LH, Inner RH)Guard Assembly 1 3P-6955Wear Strip 1 9M-6744Bolt 4 1D-4625 (19)

Lock Washer 4 3B-4514Front (Outer RH, Inner LH)Guard Assembly 1 3P-6954Wear Strip 1 9M-6743Bolt 4 1D-4625 (19)

Lock Washer 4 3B-4514Rear (Outer RH)Guard Assembly 1 3P-6955Wear Strip 1 9M-6744Bolt 4 1D-4625 (19)

Lock Washer 4 3B-4514Rear (Outer LH)Guard Assembly 1 3P-6954Wear Strip 1 9M-6743Bolt 4 1D-4625 (19)

Lock Washer 4 3B-4514

17 These components are not included in the roller group; quantities shown are required to mount each roller.18 Component of preceding assembly or group; quantity shown is quantity per assembly or group.19 1D4626 bolt required with 594 Pipelayer.

393

D9, 594D9 TRACK ROLLER GUARDS

FULL LENGTH66A5853-UP, 90J, 91J

(PER MACHINE) QUANTITY PART NUMBERGuard AssemblyInner RH 1 7S-8011Inner LH 1 7S-8012Outer RH 1 7S-8013Outer LH 1 7S-8013

D9 FINAL DRIVE GUARDS66A, 90J, 91J, 29N, 30N, 90V, 97V, 98V, 99V, 12U

(PER MACHINE) QUANTITY PART NUMBERGuard 2 7S-7975Bolt 12 1S-0454Lock Washer 12 3B-4514

395

Track-Type Loaders935C, 935B, 933C, 933, 931C, 931B, 931 .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 396939C, 939 ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 407941 .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 415943 .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 422951 .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 428953D, 953C, 953B, 953 .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 434955 .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 451963D, 963C, 963B, 963 .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 465973D, 973C, 973 .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 484977 .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 502983 .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 518

396

935C, 935B, 933C, 933, 931C, 931B, 931935C/B, 931C/B, 931, 933C, 931 SEALED AND LUBRICATED TRACK

LARGE STEPPED BUSHING36 & 37 SECTIONS 935C/B, 931B/C, 931 39 SECTION 933C, 933


NUMBER 36 Section 37 Section 39 SectionLink Assembly (Quantity 2) 206-3130 (1) 205-8267 (2) 188-8764 (3)

Track LinksRH Pin End Master 6Y-0937 1 1 1LH Pin End Master 6Y-0938 1 1 1RH Bushing End Master 6Y-0939 1 1 1LH Bushing End Master 6Y-0940 1 1 1RH Regular 6Y-0935 35 36 38LH Regular 6Y-0936 35 36 38Other ComponentsPin 154-3660 (4) 36 37 39Bushing 188-6246 36 37 39Seal Assembly (Rigid) 250-4002 72 74 78Thrust Ring 6S-9049 72 74 78Stopper 5G-2247 36 37 39Plug 6Y-0473 36 37 39Track Hardware (5)

Bolt (Grouser Shoe) 4K-7038 140 144 152Bolt (Self-Cleaning Shoe) 4K-7038 70 72 76Bolt (Self-Cleaning Shoe) 5A-3187 70 72 76Nut 7K-2017 140 144 152Master Bolt (Grouser Shoe) 5A-3187 4 4 4Master Bolt (Self-Cleaning Shoe) 5A-3187 2 2 2Master Bolt (Self-Cleaning Shoe) 5P-4683 2 2 2Special Sets/GroupsSeal Set (78 Seal Assemblies) 252-7861 1 1 1

1 Service replaced by 323-87582 Service replaced by 323-87593 Service replaced by 323-87574 Service replaced by 303-9455.5 Not part of link assembly, required to assemble track group.

397

935C, 935B, 933C, 933, 931C, 931B, 931935C/B, 933C,933, 931C/B, 931 SEALED AND LUBRICATED TRACK

JAPAN USE ONLY STEPPED BUSHING935C/B, 931C/B, 931: (36 & 37 SECTIONS) 933C,933: (39 SECTION 4MS1-UP, 5JS1-UP, 8FL1-UP, 9EL1-UP


NUMBER 36 Section 37 Section 39 SectionLink Assembly – 39 Section 323-8758 (6) 154-3644 (7) 154-3646 (8)

Track LinksRH Pin End Master 6Y-0937 1 1 1LH Pin End Master 6Y-0938 1 1 1RH Bushing End Master 6Y-0939 1 1 1LH Bushing End Master 6Y-0940 1 1 1RH Regular 6Y-0935 35 36 38LH Regular 6Y-0936 35 36 38Other ComponentsPin 154-3660 36 37 39Bushing 111-1522 36 37 39Seal Assembly (Rigid) 250-4002 72 74 78Thrust Ring 6S-9049 72 74 78Stopper 5G-2247 36 37 39Plug 6Y-0473 36 37 39Track Hardware (9)

Bolt 4K-7038 140 144 152Nut 7K-2017 140 144 152Master Bolt 5A-3187 4 4 4Special Sets/GroupsBushing and Seal Group (39 Sections) 206-3128 (10) 1 1 1

Seal Set (78 Seal Assemblies) 252-7861 1

935C, 935B, 933, 931C, 931B, 931 SEALED TRACKSTEPPED BUSHING

933 (39 SECTION): 8FL1-UP, 9EL1-UP6.125" (155.6 mm) PITCH - 9/16" BOLTPART NUMBER 36 SECTION 37 SECTION 39 SECTION

Link Assembly – (Quantity 2) 6Y-1711 – (11) 6Y-1713 (12)

Track LinksRH Pin End Master 6Y-0937 1 1 1LH Pin End Master 6Y-0938 1 1 1RH Bushing End Master 6Y-0939 1 1 1

6 Use sprockets (5) 190-7396, (25) 9W-9265 bolt, (25) 5P-8245 washer, (1) 6Y-5499 sprocket adapter, (25) 8H-5724 nut.7 Service replaced by (1) - 205-8267 and (5)- 190-7396 sprocket segments.8 Service replaced by (1) - 188-8764 and (5) - 190-7396 sprocket segments.9 Not part of link assembly; required to assemble track group.10 Must order (5) 190-7396 sprocket segments to be used with the 206-3128 Bushing and Seal Gp. This group contains the large stepped

bushing 54 mm diameter.11 Order 36 Section 6Y-1711 or 39 Section 6Y-1713 Link Assembly and add or remove appropriate number of sections.12 Early 933 traxcavator (11A, 25A, 42A) used 6.75" (171.5 mm) pitch track; refer to parts book for details.

398

935C, 935B, 933C, 933, 931C, 931B, 931935C, 935B, 933, 931C, 931B, 931 SEALED TRACKSTEPPED BUSHING933 (39 SECTION): 8FL1-UP, 9EL1-UP6.125" (155.6 mm) PITCH - 9/16" BOLT(Cont'd.)

PART NUMBER 36 SECTION 37 SECTION 39 SECTIONLH Bushing End Master 6Y-0940 1 1 1RH Regular 6Y-0935 35 36 38LH Regular 6Y-0936 35 36 38Other ComponentsPin 6B-5278 36 37 39Bushing 6Y-1717 36 37 39Seal 6S-3146 144 148 156Track Hardware (13)

Bolt 4K-7038 140 144 152Nut 7K-2017 140 144 152Master Bolt 5A-3187 4 4 4

935C, 935B, 931C, 931B, 931 SEALED AND LUBRICATED TRACKSTRAIGHT WALL BUSHING, SPLIT MASTER6.125" (155.6 mm) PITCH – 9/16" BOLT


Track LinksRH Pin End Master 1 6S-6889LH Pin End Master 1 6S-6890RH Bushing End Master 1 6S-6887LH Bushing End Master 1 6S-6888RH Regular 35 6S-8343LH Regular 35 6S-8344Other ComponentsPin 36 154-3660Bushing 36 6S-9051Seal Assembly (Rigid) 72 250-4002Thrust Ring 72 6S-9049Stopper 36 5G-2247Plug 36 6Y-0473Track Hardware (13)

Bolt 140 4K-7038Nut 140 7K-2017Master Bolt 4 5A-3187

13 Not part of link assembly; required to assemble track group.14 If 36 or 37 section link assemblies are required, upgrade to link assemblies using "6Y" track links. This will require ordering new shoes to

be used with "6Y" track links.

399

935C, 935B, 933C, 933, 931C, 931B, 931935C, 935B, 931C, 931B, 931 SEALED AND LUBRICATED TRACKSTRAIGHT WALL BUSHING, SPLIT MASTER6.125" (155.6 mm) PITCH – 9/16" BOLT(Cont'd.)

QUANTITY PART NUMBERSpecial Sets/GroupsSeal Set (78 Seal Assemblies) 1 252-7861

935C, 935B, 931C, 931B, 931 SEALED TRACKSTRAIGHT WALL BUSHING, SPLIT MASTER, SHORT UNDERCARRIAGE

6.125" (155.6 mm) PITCH – 9/16" BOLT


Track LinksRH Pin End Master 1 6S-6889LH Pin End Master 1 6S-6890RH Bushing End Master 1 6S-6887LH Bushing End Master 1 6S-6888RH Regular 35 6S-8343LH Regular 35 6S-8344Other ComponentsPin 36 6B-5278Bushing 36 6S-3178Seal 144 6S-3146Track Hardware (16)


935C, 935B, 931C, 931B, 931 SEALED TRACKSTRAIGHT WALL BUSHING, SHORT UNDERCARRIAGE

6.125" (155.6 mm) PITCH – 9/16" BOLT


Track LinksRH Master (Full) 1 6S-8084LH Master (Full) 1 6S-8085RH Regular 35 6S-8343LH Regular 35 6S-8344Other ComponentsPin 35 6B-5278Master Pin 1 8L-5560

15 Upgrade by ordering 36 section 6Y-1711 or 39 section 6Y-1713 link assembly and add or subtract appropriate number of sections. Thiswill require ordering new shoes to be used with "6Y" track links.


400

935C, 935B, 933C, 933, 931C, 931B, 931935C, 935B, 931C, 931B, 931 SEALED TRACKSTRAIGHT WALL BUSHING, SHORT UNDERCARRIAGE6.125" (155.6 mm) PITCH – 9/16" BOLT(Cont'd.)

QUANTITY PART NUMBERBushing 35 6S-3178Master Bushing 1 6S-3179Seal 144 6S-3146Spacer 2 6S-3145Track Hardware (17)

Bolt 144 4K-7038Nut 144 7K-2017

931 SEALED TRACK6.125" (155.6 mm) PITCH – 1/2" BOLT

QUANTITY PART NUMBERLink Assembly (36 Section) 2 6S-3142Track LinksRH Master (Full) 1 6S-3147LH Master (Full) 1 6S-3148RH Regular 35 6S-3143LH Regular 35 6S-3144Other ComponentsPin 35 6B-5278Master Pin 1 8L-5560Bushing 35 6S-3178Master Bushing 1 6S-3179Seal 144 6S-3146Spacer 2 6S-3145Track Hardware (17)

Bolt 144 8H-7504Nut 144 6S-3419

935C, 935B, 933C, 933, 931C, 931B, 931 TRACK SHOES*FOR USE WITH 6Y-0935/6Y-0936 TRACK LINKS

9/16" BOLT



Single Grouser - Moderate Service (18) 14.0" (355 mm) 6Y-1328 6Y-1329Single Grouser - Moderate Service (18) 16.0" (405 mm) 6Y-1381 6Y-1382Single Grouser - Moderate Service (18) 20.0" (510 mm) 6Y-1383 6Y-1384Single Grouser - Moderate Service (18) 25.0" (635 mm) 6Y-1385 6Y-1386

17 Not part of link assembly; required to assemble track group.18 Increased overlap shoe profile; for use with 6Y track links only.

401

935C, 935B, 933C, 933, 931C, 931B, 931935C, 935B, 933C, 933, 931C, 931B, 931 TRACK SHOES*FOR USE WITH 6Y-0935/6Y-0936 TRACK LINKS9/16" BOLT(Cont'd.)



Double Grouser 14.0" (355 mm) 9N-4174 9N-4175Double Grouser 25.0" (635 mm) 6Y-1589 6Y-1590Triple Grouser 14.0" (355 mm) 6Y-1596 6Y-1597Triple Grouser (Rubber Bonded) 14.0" (355 mm) 9N-4328 9N-4327Self Cleaning 25.0" (635 mm) 6S-9115 6S-9102

* 933 serial numbers (9EL1-UP and 8FL1-UP) only. Early 933 traxcavators (11A,25A,42A) used 6.75" (171.5 mm) pitch track; Refer to parts book for details.

935C, 931C TRACK SHOES*STRAIGHT WALL BUSHING, SPLIT MASTER, FOR USE WITH 6S-8343/6S-8344 TRACK LINKS

9/16" BOLT



Single Grouser - Moderate Service 12.0" (305 mm) 6S-8814 6S-7123Single Grouser - Moderate Service 14.0" (355 mm) 6S-8815 6S-9057Single Grouser - Moderate Service 16.0" (405 mm) 9W-4334 9W-4335Triple Grouser 12.0" (305 mm) 6S-8823 6S-7124Triple Grouser 14.0" (355 mm) 6Y-1596 6Y-1597

* Includes 935B, 931B and 931 model machines.

931 TRACK SHOES1/2" BOLT

TYPE WIDTH PART NUMBERSingle Grouser - Moderate Service 16.0" (405 mm) 6S-3422Triple Grouser 14.0" (355 mm) 6S-3149

935C, 933C, 931C SPROCKETS*SEGMENT DESIGN

(PER SIDE) QUANTITY PART NUMBERSprocket Hub 1 8Y-6559Sprocket Segment (5 Tooth) (Tough Steel) 5 190-7396

Adapter Ring (Weld-On) 1 6Y-5499Bolt 25 9W-9265Nut 25 8H-5724Washer 25 5P-8245* Includes 935B, 931B and 931 model machines. Note: 933 serial numbers (9EL1-UP and 8FL1-UP) only. Early 933 traxcavators (11A,25A,42A) used 6.75" (171.5 mm)pitch track; Refer to parts book for details.

402

935C, 935B, 933C, 933, 931C, 931B, 931935C, 933C, 931C SPROCKETS*

ONE PIECE DESIGN(PER SIDE) QUANTITY PART NUMBERSprocket Assembly (25 Tooth) 1 8Y-0622Rim (Weld-On Sprocket) (25 Tooth) 1 6Y-1244

* Includes 935B, 931B and 931 model machines. Note: 933 serial numbers (9EL1-UP and 8FL1-UP) only. Early 933 traxcavators (11A,25A,42A) used 6.75" (171.5 mm)pitch track; Refer to parts book for details.

935C, 933C, 931C IDLERS*


PART NUMBER PART NUMBERIdler Group 2 – – (19)

Components of GroupIdler Assembly 1 8E-7342 106-9187Idler Shell 1 – 9N-4173Bearing (Sleeve) (20) 2 6Y-4744 –

Bushing Assembly (20) 2 – 6S-3495Bearing (21) 1 – 6Y-4744Shaft 1 8E-7343 6S-3697Washer Thrust 2 6Y-2110 6S-7715Bearing Block 1 8Y-1697 6S-3451Bearing Block 1 8Y-1698 6S-3453Seal – Duo-Cone™ Group 2 1M-8746 1M-8746Toric Ring (21) 2 8H-2265 6S-3284Shaft O-Ring 2 1H-9696 1H-9696Plate Assembly 4 6S-7220 6S-7220Bolt 8 5P-2566 5P-2566Washer 8 7X-0584 7X-0584Lock 2 5M-5000 5M-5000Bolt 4 8C-6877 8C-6877Washer 4 7X-0618 7X-0618Stopper 1 7G-4332 –

Plug 1 6Y-0473 9F-2247Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 8S-5656 5P-0373Toric Ring (21) 2 8S-5653 3N-3095


19 Order either 164-1047 or 185-4037 idler groups20 Component of Idler Assembly.21 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

403

935C, 935B, 933C, 933, 931C, 931B, 931935C, 933C, 931C CARRIER ROLLERS*

(PER MACHINE) QUANTITY PART NUMBERGroup 2 6S-3609Components of GroupRoller Shell 1 172-0160Shaft 1 6K-9861Cup 2 1M-8736Cone 2 1M-8735Ring 1 1M-7914Cover 1 4H-9527Collar Assembly 1 1M-7918Bolt 5 0L-1351Washer 5 3B-4506Seal – Duo-Cone Group 1 9W-5224Toric Ring (22) 2 1M-3097Cover 1 4H-9628Shaft O-Ring 1 1H-9696Plate 1 6K-9860Bolt 2 6V-4791Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 1 5K-6191Toric Ring (22) 2 2S-2181


935C, 933C, 931C TRACK ROLLERS*(PER MACHINE) QUANTITY PART NUMBERDouble Flange (DF) 4 231-3080 (23)

Single Flange (SF) 6 (24) 231-3079 (25)

Components of GroupRoller Shell (DF) 1 6S-7040Roller Shell (SF) 1 6S-7038Bushing Assembly 2 6S-3495Bearing (26) 1 6Y-4744Shaft 1 6S-3171End Collar 2 3T-4283Thrust Washer 2 6S-7715Seal – Duo-Cone Group 2 216-2957Toric Ring (26) 2 216-2956

22 Component of preceding group; quantity shown is the quantity per group.23 Serviced Replaced By: 1 - Roller Group (DF) 281-8338, 4 - Bolt 0S-1585, 4 - Washer 2W-0849.24 933C Requires 8 Single Flange Roller Gps25 Serviced Replaced By: 1 - Roller Group (SF) 281-8339, 4 - Bolt 0S-1585, 4 - Washer 2W-0849.26 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

404

935C, 935B, 933C, 933, 931C, 931B, 931935C, 933C, 931C TRACK ROLLERS* (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERShaft O-Ring 2 7D-9749Plug 1 9F-2247Mounting Hardware (27)

Bolt 4 0S-1585Washer 4 2M-0849Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 5P-0373Toric Ring (28) 2 3N-3095


933C TRACK GUIDING GUARDS (REAR SPROCKET)(PER MACHINE) QUANTITY PART NUMBERGuard Assembly (RH Outer) 1 128-9545





Guard Assembly (Top LH) 1 128-9474Bolt 6 5S-7379Washer 6 5P-1075Guard 2 128-9555Bolt 2 4L-6454Washer 2 5P-1075Bolt 4 7X-0288Washer 4 5P-1075Spacer 4 130-1433

933C TRACK ROLLER GUARDS (FULL LENGTH)USE WITH TRACK GUIDING GUARDS (REAR SPROCKET)

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 138-1937Guard Assembly 2 138-1936

27 These components are not included in the roller group; quantities shown are required to mount each roller.28 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

405

935C, 935B, 933C, 933, 931C, 931B, 931933C TRACK ROLLER GUARDS (FULL LENGTH)USE WITH TRACK GUIDING GUARDS (REAR SPROCKET)(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERBolt 16 8T-8917Nut 16 8T-4223Tab (Front) 4 8Y-3413Bolt 4 4L-6454Washer 4 8T-4896Plate (Rear) 4 138-1946Plate (Rear) 4 138-1945Bolt 8 8T-8917Washer 8 8T-4223Pipe 8 8Y-1009Bolt 8 6M-9613Nut 16 8T-4223

935C, 935B, 931C, 931B SPROCKET/IDLER TRACK FRAME GUARDS(PER MACHINE) QUANTITY PART NUMBERRoller Frame Guard (RH) 1 – (29)


Idler Guard 2 8Y-8964Sprocket Guard (RH) 1 8Y-8967Sprocket Guard (LH) 1 8Y-8968Wiper Guard (RH) 1 8Y-8977Wiper Guard (LH) 1 8Y-8978Bracket 2 6S-6741Bolt 34 5S-7379Bolt 6 8T-8917Washer 34 5P-1075Washer 6 8T-4223* This guarding package has shown a marked improvement in undercarriage wear life when used in loose abrasive soils. The purpose of this package is to shedmaterial and prevent its entry into the undercarriage system (link box area).

933 SPROCKET/IDLER TRACK FRAME GUARDS*STD



Idler Guard 2 104-4122

29 Guard (LH) 103-8835 serviced by (1) 139-5740 Guard Assembly and (1) 8Y6660 Tab Assembly.30 Guard (LH) 103-8838 serviced by (1) 139-5739 Guard Assembly and (1) 8Y6660 Tab Assembly.31 Guard (LH) 103-8836 serviced by (1) 139-5742 Guard Assembly and (1) 8Y6660 Tab Assembly.32 Guard (LH) 103-8837 serviced by (1) 139-5741 Guard Assembly and (1) 8Y6660 Tab Assembly.

406

935C, 935B, 933C, 933, 931C, 931B, 931933 SPROCKET/IDLER TRACK FRAME GUARDS*STD(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERSprocket Guard (RH) 1 8Y-8967Sprocket Guard (LH) 1 8Y-8968Wiper Guard (RH) 1 8Y-8977Wiper Guard (LH) 1 8Y-8978Bracket 2 6S-6741Bolt 34 5S-7379Bolt 6 8T-8917Washer 34 5P-1075Washer 6 8T-4223* This guarding package has shown a marked improvement in undercarriage wear life when used in loose abrasive soils. The purpose of this package is to shedmaterial and prevent its entry into the undercarriage system (link box area).

933 SPROCKET/IDLER TRACK FRAME GUARDS*LGP

(PER MACHINE) QUANTITY PART NUMBERRoller Frame Guard (RH) 1 104-4129Roller Frame Guard (LH) 1 104-4130Idler Guard 2 104-4122Sprocket Guard (RH) 1 8Y-8967Sprocket Guard (LH) 1 8Y-8968Wiper Guard (RH) 1 8Y-8977Wiper Guard (LH) 1 8Y-8978Bracket 2 6S-6741Bolt 34 5S-7379Bolt 6 8T-8917Washer 34 5P-1075Washer 6 8T-4223* This guarding package has shown a marked improvement in undercarriage wear life when used in loose abrasive soils. The purpose of this package is to shedmaterial and prevent its entry into the undercarriage system (link box area).

935C, 933C, 933, 931C IDLER ROCK GUARDS (WITHOUT COUNTER WEIGHT)(PER MACHINE) QUANTITY PART NUMBERGuard Assembly (RH) 2 102-5920Guard Assembly (LH) 2 102-5921

407

939C, 939939C, 939 SEALED AND LUBRICATED TRACK

LARGE STEPPED BUSHING6DS, 9GL


Link Assembly – 37 Section 2 227-9960Components of Link AssemblyTrack LinksRH Pin End Master 1 6Y-9263LH Pin End Master 1 6Y-9264RH Bushing End Master 1 9G-8585LH Bushing End Master 1 9G-8586RH Regular 36 6Y-9261LH Regular 36 6Y-9262Other ComponentsPin 37 160-7816 (1)

Bushing 37 224-3959Seal Assembly (Rigid) 74 250-4000Thrust Ring 74 6Y-6486Stopper 37 5G-2247Plug 37 6Y-0473Track Hardware (2)

Bolt 144 9G-3110Nut 144 1M-1408Master Bolt 2 3T-8601Master Bolt 2 9G-8592Special Sets/GroupsSeal Set (88 Seal Assemblies) 1 252-7860Bushing and Seal Group (39 Sections) 1 227-9954

939C, 939 SEALED AND LUBRICATED TRACK6DS, 9GL

6.75" (171.5 mm) PITCH – 5/8" BOLT


Components of Link AssemblyTrack LinksRH Pin End Master 1 6Y-9263LH Pin End Master 1 6Y-9264RH Bushing End Master 1 9G-8585LH Bushing End Master 1 9G-8586RH Regular 36 6Y-9261

1 Former pin 6Y-9260 (use 9G-1642 stopper).2 Not part of link assembly; required to assemble track group3 Serviced replaced by (1) 227-9960 link assembly, (2) 197-9677 sprocket segments, and (3) 197-9678 sprocket segments.

408

939C, 939939C, 939 SEALED AND LUBRICATED TRACK6DS, 9GL6.75" (171.5 mm) PITCH – 5/8" BOLT(Cont'd.)

QUANTITY PART NUMBERLH Regular 36 6Y-9262Other ComponentsPin 37 160-7816 (4)

Bushing 37 9G-8588Seal Assembly (Rigid) 74 250-4000Thrust Ring 74 6Y-6486Stopper 37 5G-2247Plug 37 6Y-0473Track Hardware (5)

Bolt 144 9G-3110Nut 144 1M-1408Master Bolt 2 3T-8601Master Bolt 2 9G-8592Special Sets/GroupsSeal Set (88 Seal Assemblies) 1 252-7860Bushing and Seal Group (39 Sections) 1 – (6)

939C, 939 ROTATING BUSHING TRACK*6.75" (171.5 mm) PITCH – 5/8" BOLT


Components of Link AssemblyTrack LinksRH Pin End Master 1 108-0949LH Pin End Master 1 108-0950RH Bushing End Master (8) 1 109-0488LH Bushing End Master (8) 1 109-0489RH Regular (8) 36 109-0486LH Regular (8) 36 109-0487Other ComponentsPin 37 152-8075Bushing 37 109-0478Seal Assembly (Rigid) 148 250-3992Thrust Ring 148 152-8069

4 Former pin 6Y-9260 (use 9G-1642 stopper).5 Not part of link assembly; required to assemble track group6 Order (1) 227-9954 Seal and Bushing Group, (2) 197-9677 Sprocket Segments, and (3) 197-9678 Sprocket Segments.7 Serviced replaced by 227-9960 (Heavy Duty) Refer to IRM PELJ1141 for conversion options.8 Contains link and insert. Insert is not serviced.

409

939C, 939939C, 939 ROTATING BUSHING TRACK*6.75" (171.5 mm) PITCH – 5/8" BOLT(Cont'd.)

QUANTITY PART NUMBERStopper 37 5G-2247Plug 37 6Y-0473Track Hardware (9)

Bolt 144 9G-3110Nut 144 1M-1408Master Bolt 2 9G-8592Master Bolt 2 3T-8601* Rotating Bushing Track is an application specific undercarriage, designed for high abrasion/low impact applications (4000 hour system life or less). When in-stalling Rotating Bushing Track on existing machines, refer to IRM UC98-19 for adaptability, installation and guarding information.

939C, 939 TRACK SHOESTYPE WIDTH PART NUMBERSingle Grouser - Moderate Service 18.0" (460 mm) 3T-0360Double Grouser 16.0" (405 mm) 102-3585Double Grouser 18.0" (460 mm) 102-3587

939C SPROCKETS(PER SIDE) QUANTITY PART NUMBERSprocket Hub 1 112-8980Sprocket Segment (Tough Steel) (4 Tooth) 2 197-9677Sprocket Segment (Tough Steel) (5 Tooth) 3 197-9678Bolt 23 6V-0937

939 SPROCKETS(PER SIDE) QUANTITY PART NUMBERSprocket Hub 1 118-3539Sprocket Segment (Tough Steel) (4 Tooth) 2 197-9677Sprocket Segment (Tough Steel) (5 Tooth) 3 197-9678Bolt 23 6V-0937Nut 23 7H-3607Washer 23 2S-5658

9 Not part of the link assembly; required to assemble track group.

410

939C, 939939C, 939 SPROCKETSROTATING BUSHING TRACK

(PER SIDE) QUANTITY PART NUMBERSprocket Segment (Tough Steel) (4 Tooth) 2 197-9677Sprocket Segment (Tough Steel) (5 Tooth) 3 197-9678Bolt 23 6V-0937Nut (10) 23 7H-3607Washer (10) 23 2S-5658

939C, 939 IDLERS(PER MACHINE) QUANTITY PART NUMBERIdler Group 2 – (11)

Components of GroupsIdler Assembly 1 9U-9065Bushing Assembly 2 1V-9611Bushing (12) 1 7K-1089Shaft 1 8E-7899Bearing Block 1 8Y-6650Bearing Block 1 8Y-6651Seal – Duo-Cone Group 2 9W-5224Toric Ring (12) 2 1M-3097Bolt 12 9B-7237Washer 12 8T-4896Stopper 1 7G-4332Plug 1 6Y-0473Lock 2 5M-5000Bolt 2 8C-6877Washer 2 7X-0618Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 5K-6191Toric Ring (12) 2 2S-2181

939C, 939 CARRIER ROLLERS(PER MACHINE) QUANTITY PART NUMBERGroup 2 6K-9880Components of GroupRoller Shell 1 9W-6174Shaft 1 6K-9861Cup 2 1M-8736

10 Not required for Hystat machines (only bolts).11 Order 185-4038 idler group.12 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

411

939C, 939939C, 939 CARRIER ROLLERS (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERCone 2 1M-8735Ring 1 1M-7914Cover 1 3K-6638Collar Assembly 1 1M-7918Plug 1 2P-0347Bolt 3 0L-1351Washer 3 5M-2894Plate 1 6K-9860Bolt 2 6V-4791Seal – Duo-Cone Group 1 9W-5224Toric Ring (13) 2 1M-3097Seal – Cover 1 5H-8848Seal – Plug 1 1S-8947Seal – Shaft O-Ring 1 1H-9696Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 1 5K-6191Toric Ring (13) 2 2S-2181

939C, 939 TRACK ROLLERSCURRENT DESIGN9GL0496-UP



Tall Flange Double (TFD) – (14) 347-4170Mounting Hardware (15)

Cap 2 248-5323Bolt 4 1A-8537Washer 4 5P-8247

939 TRACK ROLLERSFORMER DESIGN (BOLT-ON RETAINER)

(PER MACHINE) QUANTITY FORMER PART NUMBERDouble Flange (DF) 4 – (16)

Single Flange (SF) 8 – (17)

Components of Group

13 Component of preceding group; quantity shown is the quantity per group14 Optional DF Roller for guiding; use required for specific roller frame type.15 These components are not included in the roller group; quantities shown are required to mount each roller.16 Upgrade to 347-0406 roller group.17 Upgrade to 346-8807 roller group.

412

939C, 939939 TRACK ROLLERSFORMER DESIGN (BOLT-ON RETAINER)(Cont'd.)(PER MACHINE) QUANTITY FORMER PART NUMBERRoller Shell (DF) 1 7G-4832Roller Shell (SF) 1 7G-4833Bearing (18) 2 8P-7002Shaft 1 8E-6573Retainer Assembly 2 3T-9538 (19)

Thrust Ring (20) 1 9G-9351Dowel (20) 4 1L-5072Bolt 12 0S-1594Washer 12 5M-2894Stabilizer Ring 2 7T-4030Seal – Duo-Cone Group 2 7T-4080Toric Ring (18) 1 8P-7003O-Ring (18) 1 6V-2699Seal – Retainer 2 1H-6227Stopper 1 7G-4332Plug 1 6Y-0473Mounting Hardware (21)

End Cap 2 7G-4829Bolt 4 1B-4367Washer 4 5P-8247Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 7T-4086Toric Ring (18) 1 7T-4087O-Ring (18) 1 6V-2699

939C END GUIDING GUARDS(PER MACHINE) QUANTITY PART NUMBERFront (Guard Assembly)Right Outer, Left Inner 2 152-7182Left Outer, Right Inner 2 152-7183

18 Component of preceding assembly or group; quantity shown is quantity per assembly or group.19 Service Replaced by 237-8201.20 These components are only to repair retainer assembly. See Special Instruction SEHS8515.21 These components are not included in the roller group; quantities shown are required to mount each roller.

413

939C, 939939 END GUIDING GUARDS

FORMER MODEL(PER MACHINE) QUANTITY PART NUMBERFront (Guard Assembly)Right Outer, Left Inner 2 8Y-8908Left Outer, Right Inner 2 8Y-8909Rear (Guard Assembly)Right Outer, Left Inner 2 8Y-8912Left Outer, Right Inner 2 8Y-8911

939C TRACK GUIDING GUARDS (REAR SPROCKET)(PER MACHINE) QUANTITY PART NUMBERGuard Assembly (RH Outer) 1 132-3829Guard Assembly (LH Outer) 1 132-6625

Guard Assembly (RH Inner) 1 132-3830Guard Assembly (LH Inner) 1 132-3849Bolt 16 7X-0353Washer 16 8T-4122Guard Assembly (RH Inner) 1 132-3831


Guard Assembly (Top LH) 1 132-4677Bolt 4 5S-7379Washer 4 5P-1075Guard 2 132-3861Bolt 6 4L-6454Washer 6 5P-1075

939C, 939 TRACK ROLLER GUARDS (WITH SPROCKET GUARD)CURRENT MODEL (FULL LENGTH)

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 138-1934Guard Assembly 2 138-1935Pipe 8 8Y-7125Bolt 16 8T-8917Bolt 8 8S-3887Bolt 4 4L-6454Washer 4 8T-4896Washer 24 8T-4223Nut 3 6V-8188Tab 4 8Y-3413

414

939C, 939939C, 939 TRACK ROLLER GUARDS (WITH SPROCKET GUARD)CURRENT MODEL (FULL LENGTH)(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERPlate 4 138-1945Plate 4 138-1946Bolt 8 8T-8919Washer 8 5P-8245

939 TRACK ROLLER GUARDS (WITHOUT SPROCKET GUARD)FORMER MODEL (FULL LENGTH)

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 8Y-7120Guard Assembly 2 8Y-7121Pipe 10 8Y-7125Bolt 20 8T-8917Bolt 10 8S-3887Bolt 8 4L-6454Washer 8 8T-4896Washer 30 8T-4223Nut 10 6V-8188Tab 8 8Y-3413

939C IDLER ROCK GUARDS (WITHOUT COUNTER WEIGHT)(PER MACHINE) QUANTITY PART NUMBERGuard Assembly (RH) 2 105-0929Guard Assembly (LH) 2 105-0930

415

941941 SEALED AND LUBRICATED TRACK

16U, 70H, 75H, 80H6.75" (171.5 mm) PITCH – 5/8" BOLT

QUANTITY PART NUMBERLink Assembly – 38 Section 2 154-3647Track LinksRH Pin End Master 1 1V-4603LH Pin End Master 1 1V-4604RH Bushing End Master 1 1V-4605LH Bushing End Master 1 1V-4606RH Regular 37 9K-6629LH Regular 37 9K-6628Other ComponentsPin 38 154-3664 (1)

Bushing (Stepped) 38 7T-4628Seal Assembly (Rigid) 76 250-4004Thrust Ring 76 1V-3361Stopper 38 5G-2247Plug 38 6Y-0473Track Hardware (2)

Bolt 148 7H-3597Nut 148 1M-1408Master Bolt 4 3P-2274Special Sets/GroupsBushing and Seal Group (40 Sections) 1 154-3654


941 SEALED TRACK16U, 70H, 75H, 80H

6.75" (171.5 mm) PITCH – 5/8" BOLT

QUANTITY PART NUMBERLink Assembly – 38 Section 2 1V-7074Track LinksRH Pin End Master 1 1V-4603LH Pin End Master 1 1V-4604RH Bushing End Master 1 1V-4605LH Bushing End Master 1 1V-4606RH Regular 37 9K-6629LH Regular 37 9K-6628Other ComponentsPin 38 9K-4060Bushing 38 9K-4061

1 Former pin 9K-8550 (use 9G-1642 stopper)2 Not part of link assembly; required to assemble track group.

416

941941 SEALED TRACK16U, 70H, 75H, 80H6.75" (171.5 mm) PITCH – 5/8" BOLT(Cont'd.)

QUANTITY PART NUMBERSeal 152 7K-2018Track Hardware (3)

Bolt 148 7H-3597Nut 148 1M-1408Master Bolt 4 3P-2274Special Sets/GroupsPin and Bushing Group (38 Sections) 1 1V-8623

941 FORMER SEALED TRACK16U, 70H, 75H, 80H

6.75" (171.5 mm) PITCH – 5/8" BOLT


Track LinksRH Master (Full) 1 9K-0029LH Master (Full) 1 9K-0028RH Regular 37 9K-6629LH Regular 37 9K-6628Other ComponentsPin 37 9K-4060Master Pin 1 9K-4062Bushing 37 9K-4061Master Bushing 1 7K-2020Seal 152 7K-2018Spacer 2 9K-4059Track Hardware (3)

Bolt 152 7H-3597Nut 152 1M-1408Special Sets/GroupsPin and Bushing Group (38 Sections) 1 1V-8623

941 TRACKLARGE O.D. BUSHING16U, 70H, 75H, 80H


Link Assembly – 38 Section 2 7K-2051Track Links

3 Not part of link assembly; required to assemble track group.4 Upgrade to 1V-7074 Link Assembly

417

941941 TRACKLARGE O.D. BUSHING16U, 70H, 75H, 80H6.75" (171.5 mm) PITCH – 9/16" BOLT(Cont'd.)

QUANTITY FORMER PART NUMBERRH Regular 38 7K-1825LH Regular 38 7K-1826Other ComponentsPin 37 4B-6166Master Pin 1 4K-3919Bushing 37 7K-2019Master Bushing 1 7K-2020Seal (Sealed Track) 152 7K-2018Spacer 2 7K-2016Track Hardware (5)

Bolt 152 4K-7038Nut 152 7K-2017

941 TRACKSMALL O.D. BUSHING16U, 70H, 75H, 80H



Track LinksRH Regular 38 5K-9457LH Regular 38 5K-9458Other ComponentsPin 37 4B-6166Master Pin 1 4K-3919Bushing 37 4K-3918Master Bushing 1 4M-0740Seal (Sealed Track) 152 5K-2707Spacer 2 4K-3916Track Hardware (5)

Bolt 152 4K-7038Nut 152 7K-2017

5 Not part of link assembly; required to assemble track group.6 Upgrade to 7K-2051 Link Assembly.

418

941941 TRACK SHOES

6.75" (171.5 mm) PITCH – 5/8" BOLT



Single Grouser - Moderate Service 13.0" (330 mm) 206-3507 206-3515Double Grouser 13.0" (330 mm) 8E-4807 8E-4808Double Grouser 14.0" (355 mm) 8E-4805 6I-8780Triple Grouser 14.0" (355 mm) 9G-6396 6I-8780 (7)


TYPE WIDTH PART NUMBERTriple Grouser 13.0" (330 mm) 5K-8566Triple Grouser 14.0" (355 mm) 7K-1548

941 SPROCKETS(PER SIDE) QUANTITY PART NUMBERSprocket Assembly (29 Tooth) 1 4V-4106Rim (29 Tooth) 1 4V-4107

941 IDLERSSTRAIGHT SHAFT, 9K BLOCKS

(PER MACHINE) QUANTITY PART NUMBERIdler Assembly 2 1M-8867Other ComponentsBushing Assembly 2 1V-9611Bearing (8) 1 7K-1089Shaft 1 8E-7899Bearing Block 1 9K-8857Bearing Block 1 9K-9113Seal – Duo-Cone Group 2 9W-5224Toric Ring (8) 2 1M-3097Bushing O-Ring 2 1H-8128Shaft O-Ring 2 7F-8267Bolt 12 1A-2029Washer 12 3B-4506Plug 1 6Y-0473Stopper 1 7G-4332Lock 1 5M-5000Bolt 1 0T-0772

7 Double Grouser Master - Trim grouser to match triple grouser height.8 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

419

941941 IDLERSSTRAIGHT SHAFT, 9K BLOCKS(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERWasher 1 4K-9943Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 5K-6191Toric Ring (9) 2 2S-2181

941 IDLERSSTEPPED SHAFT, 4K BLOCKS

(PER MACHINE) QUANTITY FORMER PART NUMBERIdler Assembly 2 1M-8867Other ComponentsBushing Assembly 2 1V-9611Bearing (9) 1 7K-1089Shaft 1 4K-9984Bearing Block 1 4K-5285Bearing Block 1 4K-5286Seal – Duo-Cone Group 2 9W-5224Toric Ring (9) 2 1M-3097Bushing O-Ring 2 1H-8128Shaft O-Ring 2 4F-7952Plug 1 1S-8947Bolt 12 0S-1588Washer 12 3B-4506Plug 1 2P-0347Lock 1 5M-5000Bolt 1 0T-0772Washer 1 4K-9943Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 5K-6191Toric Ring (9) 2 2S-2181

941 CARRIER ROLLERS(PER MACHINE) QUANTITY PART NUMBERGroup 2 6K-9880Components of GroupRoller Shell 1 9W-6174Shaft 1 6K-9861Cup 2 1M-8736


420

941941 CARRIER ROLLERS (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERCone 2 1M-8735Ring 1 1M-7914Cover 1 3K-6638Collar Assembly 1 1M-7918Plug 1 2P-0347Bolt 3 0L-1351Washer 3 5M-2894Plate 1 6K-9860Bolt 2 6V-4791Seal – Duo-Cone Group 1 9W-5224Toric Ring (10) 2 1M-3097Seal – Cover 1 5H-8848Seal – Plug 1 1S-8947Seal – Shaft O-Ring 1 1H-9696Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 1 5K-6191Toric Ring (10) 2 2S-2181

941 TRACK ROLLERS(PER MACHINE) QUANTITY PART NUMBERDouble Flange (DF) 6 118-1609


Components of GroupRoller Shell (DF) 1 9P-7786Roller Shell (SF) 1 9P-7782Bushing Assembly 2 1V-9611Bearing (11) 1 7K-1089Shaft 1 118-1610 (12)

End Collar 2 118-1616 (13)

Retaining Ring 2 6H-7382Bolt 12 2P-3201Seal – Duo-Cone Group 2 9W-5224Toric Ring (11) 2 1M-3097Bushing O-Ring 2 1H-8128Shaft O-Ring 2 7F-8267Stopper 1 7G-4332Plug 1 6Y-0473

10 Component of preceding group; quantity shown is the quantity per group.11 Component of preceding assembly or group; quantity shown is per assembly or group.12 Replaces former 3K-6616 shaft; requires 2 – 118-1616 end collars.13 If 3K-6616 shaft is used, use 2 – 5K-7187 end collars.

421

941941 TRACK ROLLERS (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERMounting Hardware (14)

Bolt 4 1A-1135Washer 4 5P-8247Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 5K-6191Toric Ring (15) 2 2S-2181Bushing O-Ring 2 5K-1770Shaft O-Ring 2 8M-5661

941 END GUIDING GUARDS(PER MACHINE) QUANTITY PART NUMBERFront (Outer LH, Inner RH)Guard Assembly 1 7K-2944Wear Strip 1 5V-3875Bolt 4 031-0221Front (Outer RH, Inner LH)Guard Assembly 1 7K-2943Wear Strip 1 5V-3875Bolt 4 031-0221Rear (Outer RH)Guard Assembly 1 7K-2961Wear Strip 1 5V-3876Bolt 4 031-0221Rear (Outer LH)Guard Assembly 1 7K-2962Wear Strip 1 5V-3876Bolt 4 031-0221

941 CENTER GUIDING GUARDS(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 7K-4439Bolt 16 031-0221Washer 8 4D-3704Bar 4 7V-3687Spacer 8 9M-7783Bolt 8 6K-0137


422

943943 TRACK

LARGE O.D. BUSHING, HIGH RAIL LINK19Z, 3Y, 31Y, 4Z


Link Assembly – 38 Section 2 154-3661Components of Link AssemblyTrack LinksRH Pin End Master 1 7T-4175LH Pin End Master 1 7T-4176RH Bushing End Master 1 7T-4177LH Bushing End Master 1 7T-4178RH Regular 37 7T-4173LH Regular 37 7T-4174Other ComponentsPin 38 154-3664 (1)

Bushing 38 7T-4628Seal Assembly (Rigid) 76 250-4004Thrust Ring 76 1V-3361Stopper 38 5G-2247Plug 38 6Y-0473Track Hardware (2)



943 TRACKD4E TRACK LINKS19Z, 3Y, 31Y, 4Z

6.75" (171.5 mm) PITCH – 5/8" BOLT

(PER MACHINE) QUANTITY FORMER PART NUMBERLink Assembly – 38 Section 2 154-3647Components of Link AssemblyTrack LinksRH Pin End Master 1 1V-4603LH Pin End Master 1 1V-4604RH Bushing End Master 1 1V-4605LH Bushing End Master 1 1V-4606RH Regular 37 9K-6629

1 Former pin 9K-8550 (Use 9G-1643 stopper).2 Not part of link assembly; required to assemble track group

423

943943 TRACKD4E TRACK LINKS19Z, 3Y, 31Y, 4Z6.75" (171.5 mm) PITCH – 5/8" BOLT(Cont'd.)(PER MACHINE) QUANTITY FORMER PART NUMBERLH Regular 37 9K-6628Other ComponentsPin 38 154-3664 (3)

Bushing 38 7T-4628Seal Assembly (Rigid) 76 250-4004Thrust Ring 76 1V-3361Stopper 38 5G-2247Plug 38 6Y-0473Track Hardware (4)






Double Grouser 13.0" (330 mm) 8E-4807 8E-4808Double Grouser 14.0" (355 mm) 8E-4805 6I-8780Double Grouser (LGP) 18.0" (460 mm) 8E-4799 8E-4800Triple Grouser 14.0" (355 mm) 9G-6396 6I-8780 (5)

943 SPROCKETS(PER SIDE) QUANTITY PART NUMBERSprocket Segment (5 Tooth) 5 6Y-5661Bolt 20 3S-8182Nut 20 7H-3607

3 Former pin 9K-8550 (use 9G-1642 stopper).4 Not part of link assembly; required to assemble track group5 Double Grouser Master. - Trim grouser to match triple grouser height.

424

943943 IDLERS

(PER MACHINE) QUANTITY PART NUMBERIdler Assembly 2 7T-1315Other ComponentsBushing Assembly 2 1V-9611Bearing (6) 1 7K-1089Shaft 1 8E-7899Seal – Duo-Cone Group 2 9W-5224Toric Ring (6) 2 1M-3097Bushing O-Ring 2 1H-8128Shaft O-Ring 2 7F-8267Bolt 12 9B-7237Washer 12 8T-4896Stopper 1 7G-4332Plug 1 6Y-0473Lock 2 5M-5000Bolt 2 8C-6877Washer 2 7X-0563Swing Link 1 8G-3170Swing Link 1 8G-3172Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 5K-6191Toric Ring (6) 2 2S-2181

943 CARRIER ROLLERS(PER MACHINE) QUANTITY PART NUMBERGroup 2 6K-9880Components of GroupRoller Shell 1 9W-6174Shaft 1 6K-9861Cup 2 1M-8736Cone 2 1M-8735Ring 1 1M-7914Cover 1 3K-6638Collar Assembly 1 1M-7918Plug 1 2P-0347Bolt 3 0L-1351Washer 3 5M-2894Plate 1 6K-9860Bolt 2 6V-4791Seal – Duo-Cone Group 1 9W-5224


425

943943 CARRIER ROLLERS (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERToric Ring (7) 2 1M-3097Seal – Cover 1 5H-8848Seal – Plug 1 1S-8947Seal – Shaft O-Ring 1 1H-9696Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 1 5K-6191Toric Ring (7) 2 2S-2181

943 TRACK ROLLERS*CURRENT MODEL



Tall Flange Double (TFD) – (8) 347-4170Mounting Hardware (9)

Cap 2 248-5323Bolt 4 1A-8537Washer 4 5P-8247* For use with high rail 7T4173/74 links.

943 TRACK ROLLERS*FORMER MODEL (BOLT-ON RETAINER)



Components of GroupRoller Shell (DF) 1 7G-4832Roller Shell (SF) 1 7G-4833Bearing (10) 2 8P-7002Shaft 1 8E-6573Retainer Assembly 2 3T-9538 (11)

Thrust Ring (12) 1 9G-9351Dowel (12) 4 1L-5072Bolt 12 0S-1594Washer 12 5M-2894

7 Component of preceding assembly or group; quantity shown is quantity per assembly or group.8 Optional DF Roller for guiding; use quantity required for specific roller frame type.9 These components are not included in the roller group; quantities shown are required to mount each roller.10 Component of preceding assembly or group; quantity shown is per assembly or group.11 Service Replaced by 237-8201.12 These components are only to repair retainer assembly. See Special Instruction SEHS8515.

426

943943 TRACK ROLLERS*FORMER MODEL (BOLT-ON RETAINER)(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERStabilizer Ring 2 7T-4030Seal – Duo-Cone Group 2 7T-4080Toric Ring (13) 1 8P-7003O-Ring (13) 1 6V-2699Retainer 2 1H-6227Stopper 1 7G-4332Plug 1 6Y-0473Mounting Hardware (14)

End Cap 2 7G-4829Bolt 4 1B-4367Washer 4 5P-8247Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 7T-4086Toric Ring (13) 1 7T-4087O-Ring (13) 1 6V-2699

* For use with high rail 7T-4173/74 links.

943 TRACK ROLLERS*EARLY MODEL


Single Flange (SF) 8 118-1608Components of GroupRoller Shell (DF) 1 9P-7786Roller Shell (SF) 1 9P-7782Bushing Assembly 2 1V-9611Bearing (13) 1 7K-1089Shaft 1 118-1610 (15)

End Collar 2 118-1616 (16)

Ring 2 6H-7382Bolt 12 2P-3201Seal – Duo-Cone Group 2 9W-5224Toric Ring (13) 2 1M-3097Bushing O-Ring 2 1H-8128Shaft O-Ring 2 7F-8267

13 Component of preceding assembly or group; quantity shown is per assembly or group.14 These components are not included in the roller group; quantities shown are required to mount each roller.15 Replaces former 3K-6616 shaft; requires 2 – 118-1616 end collars.16 If 3K-6616 shaft is used, use 2 – 5K-7187 end collars.

427

943943 TRACK ROLLERS*EARLY MODEL(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERStopper 1 7G-4332Plug 1 6Y-0473Mounting Hardware (17)

Bolt 4 1A-1135Washer 4 5P-8247Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 5K-6191Toric Ring (18) 2 2S-2181Bushing O-Ring 2 5K-1770Shaft O-Ring 2 8M-5661

* For use with 9K-6628 and 9K-6629 links.

943 END GUIDING GUARDS(PER MACHINE) QUANTITY PART NUMBERFront (Guard Assembly)Right Outer, Left Inner 1 3W-8410Left Outer, Right Inner 1 3W-8407Wear Strip 2 7P-7208Bolt 8 5P-2228Rear (Guard Assembly)Right Outer, Left Inner 1 8G-6781Left Outer, Right Inner 1 8G-6792Wear Strip 2 8G-6793Bolt 10 5P-2228


428

951951 SEALED AND LUBRICATED TRACK15F, 19H, 32F, 44Z, 69H1869-UP, 72J, 78Y, 79H, 86J1992-UP

6.91" (175.5 mm) PITCH – 5/8" BOLT

QUANTITY PART NUMBERLink Assembly – 39 Section 2 154-3672Track LinksRH Pin End Master 1 3P-3043LH Pin End Master 1 3P-3044RH Bushing End Master 1 3P-3045LH Bushing End Master 1 3P-3046RH Regular 38 3P-7153LH Regular 38 3P-7154Other ComponentsPin 39 160-7818 (1)




951 SEALED TRACK15F, 19H, 32F, 44Z, 69H1869-UP, 72J, 78Y, 79H, 86J1992-UP

6.91" (175.5 mm) PITCH – 5/8" BOLT

QUANTITY PART NUMBERLink Assembly – 39 Section 2 3P-5757Track LinksRH Pin End Master 1 3P-3043LH Pin End Master 1 3P-3044RH Bushing End Master 1 3P-3045LH Bushing End Master 1 3P-3046RH Regular 38 3P-7153LH Regular 38 3P-7154Other ComponentsPin 39 6B-5502Bushing 39 5S-0710

1 Former pin 3P-3880 (use 9G-1642 stopper).2 Not part of the link assembly; required to assemble track group.

429

951951 SEALED TRACK15F, 19H, 32F, 44Z, 69H1869-UP, 72J, 78Y, 79H, 86J1992-UP6.91" (175.5 mm) PITCH – 5/8" BOLT(Cont'd.)

QUANTITY PART NUMBERSeal 156 5S-0709Track Hardware (3)


951 EXTENDED WEAR LIFE TRACK15F, 19H, 32F, 44Z, 69H1869-UP, 72J, 78Y, 79H, 86J1992-UP

6.91" (175.5 mm) PITCH – 5/8" BOLT


Track LinksRH Pin End Master 1 7T-4541LH Pin End Master 1 7T-4542RH Bushing End Master 1 7T-4543LH Bushing End Master 1 7T-4544RH Regular 38 7T-4539LH Regular 38 7T-4540Other ComponentsPin 39 160-7818 (5)




3 Not part of the link assembly; required to assemble track group.4 Note: Extended wear life link assemblies require special rollers and idlers to match the high rail link; Refer to roller and idler section for

details.5 Former pin 3P-3880 (use 9G-1642 stopper).6 Not part of link assembly; required to assemble track group.

430

951951 TRACK SHOES

6.91" (175.5 mm) PITCH – 5/8" BOLT



Single Grouser - Moderate Service 18.0" (460 mm) 175-8020 175-8021Single Grouser - Moderate Service 20.0" (510 mm) 175-8365 175-8366Double Grouser 15.0" (380 mm) 8E-4724 8E-4725Triple Grouser 15.0" (380 mm) 175-8553 8E-4725 (7)

951 SPROCKETS86J1992-UP

6.91" (175.5 mm) PITCH

(PER SIDE) QUANTITY PART NUMBERSprocket Assembly (30 Tooth) 1 4V-5374Rim (30 Tooth) 1 4V-5376

951 IDLERS(PER MACHINE) QUANTITY PART NUMBERIdler Assembly 2 8S-2560 (8)

Extended Wear Assembly (9) 2 7T-3501Other ComponentsBushing Assembly 2 3P-8272Bearing (10) 1 8P-6652Shaft 1 5K-0305Bearing Block (Out RH, In LH) 1 9G-8301Bearing Block (Out LH, In RH) 1 9G-8300Seal – Duo-Cone Group 2 9W-5224Toric Ring (10) 2 1M-3097Bushing O-Ring 2 1H-6227Shaft O-Ring 2 7F-8267Bolt 12 0S-1588Washer 12 3B-4506Plug 1 2P-0347Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 5K-6191Toric Ring (10) 2 2S-2181Bushing O-Ring 2 2S-2182Shaft O-Ring 2 8M-5661

7 Double Grouser Master - Trim grouser to match triple grouser height.8 Serviced Replaced By - 7T-3501.9 For use with Extended Wear Life Track.10 Component of preceding assembly or group; quantity shown is per assembly or group.

431

951951 CARRIER ROLLERS

(PER MACHINE) QUANTITY FORMER PART NUMBER PART NUMBERGroup 4 – (11) 5A-8374Components of GroupRoller Shell 1 2S-0205 5A-8375Shaft 1 5M-1914 3T-3207Cup 2 1M-7911 9S-3581Cone 2 1M-7912 9S-3582Ring 1 1M-7914 1M-7914Cover 1 5M-2043 5M-2043Collar 1 1M-7918 9S-3567Support 1 1M-7915 –

Plug 1 2P-0347 2P-0347Bolt 3 0S-1594 0S-1594Seal – Duo-Cone Group 1 9W-5224 6Y-0925Toric Ring (12) 2 1M-3097 8H-2262Seal – Cover 1 2H-6338 2H-6338Seal – Support 1 4H-9105 –

Seal – Plug 1 1S-8947 1S-8947Seal – Shaft O-Ring 1 1H-9696 1H-9696Ring 1 1M-7916 –

Nut 1 1M-7913 –Plate 1 – 8P-6188Bolt 2 – 5K-9107Special Application SealsSeal – Duo-Cone Group (Steel Mill) 1 5K-6191 4S-8984Toric Ring (13) 2 2S-2181 9M-9730

951 TRACK ROLLERS(PER MACHINE) QUANTITY PART NUMBERDouble Flange (DF) 4 (14) 118-1612 (15)

Single Flange (SF) 6 (14) 118-1611 (16)



Extended Wear Life Shell (DF) (17) 1 9W-8350Extended Wear Life Shell (SF) (17) 1 9W-8353

11 Upgrade to 5A-7384 group.12 Component of preceding group; quantity shown is the quantity per group.13 Component of preceding assembly or group; quantity shown is per assembly or group.14 6 - DF and 4 - SF rollers required for early 951 machines (15F, 79H, 78J, and 86J1-785).15 Serviced Replaced By: 1 - Roller Group (DF) 310-4915, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247.16 Serviced Replaced By: 1 - Roller Group (SF) 310-4912, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247.17 For use with Extended Wear Life Track.

432

951951 TRACK ROLLERS (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERBushing Assembly 2 2P-8045Bearing (18) 1 8P-6652Shaft 1 118-1613 (19)


Ring 2 6H-7382Bolt 12 2P-3201Seal – Duo-Cone Group 2 9W-5224Toric Ring (18) 2 1M-3097Bushing O-Ring 2 1H-6227Shaft O-Ring 2 7F-8267Stopper 1 7G-4332Plug 1 6Y-0473Mounting Hardware (21)

Bolt 4 8S-9092Washer 4 5P-8247Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 5K-6191Toric Ring (18) 2 2S-2181Bushing O-Ring 2 2S-2182Shaft O-Ring 2 8M-5661

951 END GUIDING GUARDS*(PER MACHINE) QUANTITY PART NUMBERFront (Outer LH, Inner RH)Guard Assembly 1 7K-3712Wear Strip 1 7K-3703Bolt 4 5K-8454Front (Outer RH, Inner LH)Guard Assembly 1 7K-3711Wear Strip 1 7K-3703Bolt 4 5K-8454Rear (Outer RH)Guard Assembly 1 7K-3713Wear Strip 1 7K-3704Bolt 4 5K-8454Rear (Outer LH)

18 Component of preceding assembly or group; quantity shown is per assembly or group.19 Serviced Replaced By: 1 - Roller Group (DF) 310-4915, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247. Serviced Replaced By:

1 - Roller Group (SF) 310-4912, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247.20 If 5M-1915 shaft is used, use 1 – 5M-0627 and 1 – 1M-3812 end collar.21 These components are not included in the roller group; quantities shown are required to mount each roller.

433

951951 END GUIDING GUARDS* (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 1 7K-3714Wear Strip 1 7K-3704Bolt 4 5K-8454* These end guiding guards can be used on 951B's with 6.91" pitch and 6.75" pitch.

434

953D, 953C, 953B, 953953D/C/B SystemOne™ TRACK

Press Fit Master7.50" (190.5 mm) PITCH 20 mm BOLT



Standard Link 34 235-2501Standard Link (Press Fit) (3) 2 235-2501 (4)

Track Hardware (3)

Bolt (20 mm) 148 6Y-0846Nut 148 9W-3361

953C HYBRID TRACKBBX

7.50" (190.5 mm) PITCH – 5/8" BOLT

QUANTITY PART NUMBERLink Assembly – 37 Section 2 230-7272Track LinksRH Pin End Master 1 244-6571LH Pin End Master 1 244-6572RH Bushing End Master 1 244-6573LH Bushing End Master 1 244-6574RH Regular 36 229-6909LH Regular 36 229-6910Other ComponentsPin 37 160-7818 (5)

Bushing 37 229-6915Seal Assembly (Rigid) 74 250-3988Thrust Ring 74 6Y-6481Stopper 37 5G-2247Plug 37 6Y-0473Track Hardware (3)

Bolt 144 9G-3110Nut 144 1M-1408Master Bolt 2 3T-8580Master Bolt 2 3T-8601Special Sets/Groups

1 Link Box Standard that is greater than 40% worn should be replaced with part number 264-9764.2 Link Box Offset that is greater than 40% worn should be replaced with part number 339-0265.3 Not part of link assembly; required to assemble track group.4 Clamp Master links 2 - 318-2375 and 4 - 254-0225 Master Bolts5 Former pin 3P-3880 (use 9G-1642 stopper).

435

953D, 953C, 953B, 953953C HYBRID TRACKBBX7.50" (190.5 mm) PITCH – 5/8" BOLT(Cont'd.)

QUANTITY PART NUMBERSeal Set (92 Seal Assemblies) 1 252-7855Bushing and Seal Group (37 Sections) 1 293-9146

953C MADE TO ORDER (MTO) TRACK GROUPSTRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIES

QUANTITY PART NUMBERLink Assembly Used 230-7272Double Grouser Shoe – 19.7" (500 mm) 2 230-7273

953C HEAVY DUTY SEALED AND LUBRICATED TRACKBBX

7.50" (190.5 mm) - PITCH 3/4" BOLT


Bolt 144 6V-1792Nut 144 1S-1860Master Bolt 2 107-0719Master Bolt 2 106-1642Special Sets/GroupsSeal Set (92 Seal Assemblies) 1 252-7855Bushing and Seal Group (37 Sections) 1 115-2439


436

953D, 953C, 953B, 953953C ROTATING BUSHING TRACK*

BBX7.50" (190.5 mm) PITCH - 3/4" BOLT


Track LinksRH Pin End Master 1 106-1627LH Pin End Master 1 106-1628RH Bushing End Master (8) 1 165-1752LH Bushing End Master (8) 1 165-1753RH Regular (8) 36 165-1750LH Regular (8) 36 165-1751Other ComponentsPin 37 156-4701Bushing 37 165-1768Seal Assembly (Rigid) 74 250-3988Thrust Ring 74 152-8070Stopper 37 5G-2247Plug 37 6Y-0473Track Hardware (9)

Bolt 144 6V-1792Nut 144 1S-1860Master Bolt 2 107-0719Master Bolt 2 106-1642* Rotating Bushing Track is an application specific undercarriage designed for high abrasion/low impact applications (4,000 hour system life or less).

953C, 953B, 953 TRACK2ZN, 20Z, 44Z, 5MK, 5Z, 76Y, 77Y, 78Y6.91" (175.5 mm) PITCH – 5/8" BOLT

QUANTITY PART NUMBERLink Assembly – 40 Section 2 154-3677Track LinksRH Pin End Master 1 7T-4541LH Pin End Master 1 7T-4542RH Bushing End Master 1 7T-4543LH Bushing End Master 1 7T-4544RH Regular 39 7T-4539LH Regular 39 7T-4540Other ComponentsPin 40 160-7818 (10)

7 Serviced replaced by 106-1635 (Heavy Duty) Refer to IRM PELJ1141 for conversion options.8 Joint Assemblies ( include link and insert). Insert not serviced9 Not part of link assembly; required to assemble track group.10 Former pin 3P-3880 (use 9G-1642 stopper).

437

953D, 953C, 953B, 953953C, 953B, 953 TRACK2ZN, 20Z, 44Z, 5MK, 5Z, 76Y, 77Y, 78Y6.91" (175.5 mm) PITCH – 5/8" BOLT(Cont'd.)

QUANTITY PART NUMBERBushing 40 7T-4636Seal Assembly (Rigid) 80 250-3990Thrust Ring 80 3P-3878Stopper 40 5G-2247Plug 40 6Y-0473Track Hardware (11)



953C MADE TO ORDER (MTO) TRACK GROUPSTRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIES

QUANTITY PART NUMBERLink Assembly Used 154-3677Double Grouser Shoe – 19.7" (500 mm) 2 8E-5281

953D SystemOne TRACK SHOES7.50" (190.5 mm) PITCH 20 mm BOLT



Double Grouser 15.0" (380 mm) 244-4534 256-4974Double Grouser 18.9" (480 mm) 300-3658 300-3659Double Grouser (Center Opening) 18.9" (480 mm) 300-3660 –

953C/B SystemOne TRACK SHOES7.50" (190.5 mm) PITCH 20 mm BOLT



Double Grouser 15.0" (380 mm) 244-4534 256-4974Double Grouser 19.7" (500 mm) 243-0501 256-4973Double Grouser (Center Opening) 19.7" (500 mm) 264-1110 –


438

953D, 953C, 953B, 953953C TRACK SHOES

BBX7.50" (190.5 mm) PITCH - 5/8" BOLT

TYPE WIDTH PART NUMBERExtreme Service 20" (510 mm) 6Y-9416Double Grouser 15.0" (380 mm) 230-7269Double Grouser 19.7" (500 mm) 230-7177Double Grouser (Trapezoidal Opening) 19.7" (500 mm) 233-7230

953C, 953B, 953 TRACK SHOES6.91" (171.5 mm) PITCH - 5/8" BOLT



Double Grouser (12) 15.0" (380 mm) 8E-4724 8E-4725Double Grouser 19.7" (500 mm) 8E-4722 8E-4723Triple Grouser (13) 15.0" (380 mm) 175-8553 8E-4725 (14)

Rubber (12) 19.7" (500 mm) 112-8139 112-8136

953C TRACK SHOERBT & HD LINK ASSEMBLY

7.50" (190.5 mm)PITCH - 3/4 BOLT



Double Grouser 15.0" (380 mm) 187-2005 187-2006Double Grouser 19.7" (500 mm) 187-2003 187-2004

953D SystemOne SprocketsLBP

7.50" (190.5 mm) PITCH

(PER SIDE) QUANTITY PART NUMBERSprocket Segment (Tough Steel) (5 Tooth) 5 197-9672Bolt 25 6V-0937

953C SPROCKETSBBX (Hybrid, Heavy Duty, Rotate Bushing, and SystemOne Track)

7.50" (190.5 mm) PITCH

(PER SIDE) QUANTITY PART NUMBERSprocket Segment (Tough Steel) (5 Tooth) 5 197-9672Bolt 25 197-9674Nut (Square) 25 196-4672

12 LGP use only.13 Slotted Center Punched.14 Double Grouser Master. - Trim grouser to match triple grouser height.

439

953D, 953C, 953B, 953953C SystemOne SPROCKETS

2ZN Machines(PER SIDE) QUANTITY PART NUMBERSprocket - Rim (25 Tooth) 1 258-9802Bolt (16 mm) 27 197-9674Nut (Square) 27 196-4672

953C SPROCKETS6.91" (171.5 mm) PITCH

(PER SIDE) QUANTITY PART NUMBERSprocket Segment (Tough Steel) (4 Tooth) 3 212-4205 (15)

Sprocket Segment (Tough Steel) (5 Tooth) 3 212-4206 (15)

Sprocket Segment (Non Abrasive Applications) 9 185-6152Bolt (Fine Thd) (16 mm) 27 197-9674Nut (Fine Thd) (Square) 27 196-4672

953B SPROCKETS6.91" (171.5 mm) PITCH

(PER SIDE) QUANTITY PART NUMBERSprocket Segment (Tough Steel) (3 Tooth) 9 187-4845Sprocket Segment (3 Tooth) 9 185-6151Bolt 27 6V-0937Nut 27 7H-3607

953D SytemOne IDLERSCONVENTIONAL IDLERS

LBP(PER MACHINE) QUANTITY PART NUMBERIdler Assembly 2 7T-3501Other ComponentsBushing Assembly 2 3P-8272Bearing (16) 1 8P-6652Shaft 1 166-0613Seal – Duo-Cone Group 2 2M-2858Toric Ring (16) 2 1M-3097Seal – Bushing O-Ring 2 1H-6227Seal – Shaft O-Ring 2 7F-8268Seal – Plug 1 1S-8947Bolt 12 9B-7237Washer 12 8T-4896

15 Former 3 tooth segment design has been replaced by 3 - 212-4205 segments & 3 - 212-4206 segments.16 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

440

953D, 953C, 953B, 953953D SytemOne IDLERSCONVENTIONAL IDLERSLBP(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERPlug 1 2P-0347Lock 2 5M-5000Bolt 2 7X-0311Washer 2 7X-0563Swing Link 1 279-9322Swing Link 1 279-9325Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 5K-6191Toric Ring (17) 2 2S-2181Bushing O-Ring 2 2S-2182Shaft O-Ring 2 8M-5661

953C/B SystemOne CENTER TREAD IDLERS(PER MACHINE) QUANTITY PART NUMBERIdler Assembly 2 228-4230Other ComponentsBushing Assembly 2 3P-8272Bearing (17) 1 8P-6652Shaft 1 166-0613Seal – Duo-Cone Group 2 9W-5224Toric Ring (17) 2 1M-3097Seal – Bushing O-Ring 2 1H-6227Seal – Shaft O-Ring 2 7F-8268Seal – Plug 1 1S-8947Bolt 12 9B-7237Washer 12 8T-4896Plug 1 2P-0347Lock 2 5M-5000Bolt 2 7X-0311Washer 2 7X-0563Swing Link 1 166-2121Swing Link 1 166-2123Plate - Scraper (Mounts to Yoke) 2 280-1417Bolt (12 mm) 6 8T-4139Washer 6 8T-4223Shim (Install between TRF and Idler Guards) 6 279-9120


441

953D, 953C, 953B, 953953C/B SystemOne CENTER TREAD IDLERS (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERBolt (16 mm) 12 7X-2554Washer 12 8T-4122Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 5K-6191Toric Ring (18) 2 2S-2181Bushing O-Ring 2 2S-2182Shaft O-Ring 2 8M-5661

953C IDLERS2ZN2609-UP, BBX

(PER MACHINE) QUANTITY PART NUMBERIdler Assembly 2 7T-3501Other ComponentsBushing Assembly 2 3P-8272Bearing (18) 1 8P-6652Shaft 1 166-0613Seal – Duo-Cone Group 2 9W-5224Toric Ring (18) 2 1M-3097Seal – Bushing O-Ring 2 1H-6227Seal – Shaft O-Ring 2 7F-8268Seal – Plug 1 1S-8947Bolt 12 9B-7237Washer 12 8T-4896Plug 1 2P-0347Lock 2 5M-5000Bolt 2 7X-0311Washer 2 7X-0563Swing Link 1 166-2121Swing Link 1 166-2123Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 5K-6191Toric Ring (18) 2 2S-2181Bushing O-Ring 2 2S-2182Shaft O-Ring 2 8M-5661


442

953D, 953C, 953B, 953953C, 953B, 953 IDLERS

FORMER DESIGN(PER MACHINE) QUANTITY PART NUMBERIdler Assembly 2 7T-3501Other ComponentsBushing Assembly 2 3P-8272Bearing (19) 1 8P-6652Shaft 1 5K-0305Seal – Duo-Cone Group 2 9W-5224Toric Ring (19) 2 1M-3097Seal – Bushing O-Ring 2 1H-6227Seal – Shaft O-Ring 2 7F-8267Seal – Plug 1 1S-8947Bolt 12 9B-7237Washer 12 8T-4896Plug 1 2P-0347Lock 2 5M-5000Bolt 2 7X-0311Washer 2 7X-0563Swing Link 1 7P-7911Swing Link 1 7P-7912Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 5K-6191Toric Ring (19) 2 2S-2181Bushing O-Ring 2 2S-2182Shaft O-Ring 2 8M-5661

953D/C/B SystemOne CARRIER ROLLERS(PER MACHINE) QUANTITY PART NUMBERCarrier Roller Group 2 229-5446

953C, 953B, 953 CARRIER ROLLERS20Z3520-UP, 2ZN1-UP, 5MK1-UP, BBX

(PER MACHINE) QUANTITY PART NUMBERGroup 2 6Y-3908 (20)

Components of GroupRoller Shell 1 5A-8375Shaft 1 6Y-2043Cup 2 9S-3581Cone 2 9S-3582

19 Component of preceding assembly or group; quantity shown is quantity per assembly or group.20 Service Replaced by 229-5446.

443

953D, 953C, 953B, 953953C, 953B, 953 CARRIER ROLLERS20Z3520-UP, 2ZN1-UP, 5MK1-UP, BBX(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERRing 1 7H-4574Cover 1 5M-2043Collar 1 7H-4571Plug 1 2P-0347Bolt 3 0S-1594Seal – Duo-Cone Group 1 6Y-0925Toric Ring (21) 2 8H-2262Seal – Cover 1 2H-6338Seal – Plug 1 1S-8947Seal – Shaft O-Ring 1 1H-8720Plate 1 8P-6188Bolt 2 5K-9107Special Application SealsSeal – Duo-Cone Group (Steel Mill) 1 4S-8984Toric Ring (21) 2 9M-9730

953 CARRIER ROLLERS20Z1-3519

(PER MACHINE) QUANTITY PART NUMBERGroup 2 5A-8374Components of GroupRoller Shell 1 5A-8375Shaft 1 3T-3207Cup 2 9S-3581Cone 2 9S-3582Ring 1 1M-7914Cover 1 5M-2043Collar 1 9S-3567Plug 1 2P-0347Bolt 3 0S-1594Seal – Duo-Cone Group 1 6Y-0925Toric Ring (21) 2 8H-2262Seal – Cover 1 2H-6338Seal – Plug 1 1S-8947Seal – Shaft O-Ring 1 1H-9696Plate 1 8P-6188Bolt 2 5K-9107Special Application Seals


444

953D, 953C, 953B, 953953 CARRIER ROLLERS20Z1-3519(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERSeal – Duo-Cone Group (Steel Mill) 1 4S-8984Toric Ring (22) 2 9M-9730

953D/C SystemOne TRACK ROLLERS(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) Roller Group 12 240-9557


Cap 2 223-9110Bolt (16 mm) 4 8T-0281Washer 4 9X-8268

953C, 953B TRACK ROLLERSCURRENT DESIGN (END COLLARS, SYMMETRIC SEALS)

2ZN218-UP, 5MK2689-UP



Tall Flange Double (TFD) – (26) 121-0830 (27)


Roller Shell (SF) 1 121-0825 (25)

Roller Shell (DF) (Tall Flange) 1 121-0831Bushing Assembly 2 121-0834Bearing 1 8P-6652Shaft 1 131-8742 (28)

Ring (Retaining-Snap) 2 121-1257Ring (Lock) 2 6H-7382End Collar 2 131-9352

22 Component of preceding group; quantity shown is the quantity per group.23 These components are not included in the roller group; quantities shown are required to mount each roller.24 Serviced Replaced By: 1 - Roller Group (DF) 310-4915, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247. Metric Hardware Serv-


iced Replaced By: 1 - Roller Group (SF) 310-4912, 2 - End Cap 223-9110, 4 - Bolt 8T-0281, 4 - Washer 5P-8247.26 Optional DF roller for guiding; use quantity required for the specific roller frame type.27 Serviced Replaced By: 1 - Roller Group (DF) 310-4918, 2 - End Cap 223-9110, 4 - Bolt 8T-0281, 4 - Washer 5P-8247. Metric28 Serviced Replaced By: 1 - Roller Group (DF) 310-4915, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247. Metric Hardware Serv-


445

953D, 953C, 953B, 953953C, 953B TRACK ROLLERSCURRENT DESIGN (END COLLARS, SYMMETRIC SEALS)2ZN218-UP, 5MK2689-UP(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERSeal – Duo-Cone Group 2 9W-5224Toric Ring (29) 2 1M-3097Seal – Bushing O-Ring 2 1H-6227Seal – Shaft O-Ring 2 7F-8267Stopper 1 7G-4332Plug 1 6Y-0473Mounting Hardware (30)

Bolt - Current 953 (16 mm) (31) 4 6V-3303Bolt - Early 953 (5/8") (31) 4 8S-9092Washer (5/8")/16mm 4 5P-8247

953B, 953 TRACK ROLLERSFORMER DESIGN (BOLT-ON RETAINER)

(PER MACHINE) QUANTITY PART NUMBERRoller Group (DF) 4 –

Roller Group (SF) 8 –

Components of GroupRoller Shell (DF) 1 9P-1362 (32)

Roller Shell (SF) 1 9P-1367 (33)

Bearing (29) 2 9P-1360Shaft 1 3T-9875Retainer Assembly 2 3T-9877Thrust Washer (34) 1 9G-9351Dowel (34) 4 1L-5072Bolt 12 0S-1594Washer 12 5M-2894Stabilizer Ring 2 7T-4030Seal – Duo-Cone Group 2 7T-4080Toric Ring (29) 1 8P-7003O-Ring (29) 1 6V-2699Seal – Retainer O-Ring 2 5H-6734

29 Component of preceding assembly or group; quantity shown is quantity per assembly or group.30 These components are not included in the roller group; quantities shown are required to mount each roller.31 953 machine effectivity for 16mm roller mounting bolts (20Z3520-UP, 5MK1-UP); All Early 953 serial numbers (76Y, 77Y, 78Y, 5Z, 20Z, 44Z,

and 20Z1-3519) require 5/8" English mounting bolts.32 Serviced Replaced By: 1 - Roller Group (DF) 310-4915, 2 - End Cap 223-9110, 4 - Bolt 1B-4367 (5/8), 4 - Washer 5P-8247. Metric Hardware

Serviced Replaced By: 1 - Roller Group (DF) 310-4915, 2 - End Cap 223-9110, 4 - Bolt 8T-0281 (16mm), 4 - Washer 5P-8247.33 Serviced Replaced By: 1 - Roller Group (SF) 310-4912, 2 - End Cap 223-9110, 4 - Bolt 1B-436 (5/8)7, 4 - Washer 5P-8247. Metric Hardware

Serviced Replaced By: 1 - Roller Group (SF) 310-4912, 2 - End Cap 223-9110, 4 - Bolt 8T-0281 (16mm), 4 - Washer 5P-8247.34 These components are only to repair retainer assembly. See Special Instruction SEHS8515.

446

953D, 953C, 953B, 953953B, 953 TRACK ROLLERSFORMER DESIGN (BOLT-ON RETAINER)(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERStopper 1 7G-4332Plug 1 6Y-0473Mounting Hardware (35)

End Cap 2 8E-0281Bolt - Current 953 (16 mm) (36) 4 8T-0281Bolt - Early 953 (5/8") (36) 4 1B-4367Washer (5/8")/16mm 4 5P-8247

953D END GUIDING GUARDS (FRONT)USE WITH SystemOne

(PER MACHINE) QUANTITY PART NUMBERFront (Guard Assembly)Right Outer, Left Inner 2 255-1075Left Outer, Right Inner 2 255-1076

953C/B END GUIDING GUARDS (FRONT)USE WITH Hybrid AND SystemOne

(PER MACHINE) QUANTITY PART NUMBERFront (Guard Assembly)Right Outer, Left Inner 2 5G-9662Left Outer, Right Inner 2 5G-9660Wear Strip 4 8Y-1853Bolt 16 8T-4139Washer 16 8T-4223

953C END GUIDING GUARDS (FRONT)USE WITH ROTATING BUSHING AND HEAVY DUTY TRACK 7.50" (190.5 mm) PITCH

(PER MACHINE) QUANTITY PART NUMBERFront (Guard Assembly)Right Outer, Left Inner 2 208-0764Left Outer, Right Inner 2 208-0763Wear Strip 4 192-3185Bolt 16 8T-4139Washer 16 8T-4223

35 These components are not included in the roller group; quantities shown are required to mount each roller.36 953 machine effectivity for 16 mm roller mounting bolts (20Z3520-UP, 5MK1-UP); All Early 953 serial numbers (76Y, 77Y, 78Y, 5Z, 20Z, 44Z,

and 20Z1-3519) require 5/8" English mounting bolts.

447

953D, 953C, 953B, 953953 END GUIDING GUARDS

(PER MACHINE) QUANTITY PART NUMBERFront (Guard Assembly)Right Outer, Left Inner 2 3W-8410Left Outer, Right Inner 2 3W-8407Wear Strip 4 7P-7208Bolt 16 5P-2228Rear (Guard Assembly)Right Outer, Left Inner 2 8G-6921Left Outer, Right Inner 2 8G-6926Wear Strip 4 8G-6927Bolt 20 5P-2228

953D TRACK GUIDING GUARDS (REAR SPROCKET)USE WITH SystemOne

(PER MACHINE) QUANTITY PART NUMBERRear Guard – Right Outer, Left Inner 2 254-5288Rear Guard – Left Outer, Right Inner 2 254-5289Bolt (M16) (Short) (Guard to Frame) 8 8T-4140Bolt (M16) (Long) (Guard to Frame) 8 7X-2475Washer 16 8T-4122Plate 2 310-8310Plate 2 310-8311Plate Assembly 2 310-8312Bolt (M12) (Plate to Plate Assembly) 18 8T-4139Bolt (M12) (Plate to Guard ) 8 8T-4192Washer 26 8T-4223

953C/B TRACK GUIDING GUARDS (REAR SPROCKET)USE WITH Hybrid AND SystemOne

(PER MACHINE) QUANTITY PART NUMBERRear Guard – Right Outer, Left Inner 2 8Y-1841Rear Guard – Left Outer, Right Inner 2 8Y-1842Bolt 8 8T-4140Bolt 8 7X-2475Washer 16 8T-4122Strip 4 3W-8536 (37)

Bolt 16 8T-4139Washer 16 8T-4223Plate Assembly 2 8Y-1990Plate 2 8Y-1994

37 Use 260-7391 Wear Strips with SystemOne Undercarriage.

448

953D, 953C, 953B, 953953C/B TRACK GUIDING GUARDS (REAR SPROCKET)USE WITH Hybrid AND SystemOne(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERPlate 2 8Y-1993Bolt 18 8T-4139Bolt 8 8T-4192Washer 26 8T-4223

953C TRACK GUIDING GUARDS (REAR SPROCKET)USE WITH ROTATING BUSHING AND HEAVY DUTY TRACK 7.50" (190.5 mm) PITCH

(PER MACHINE) QUANTITY PART NUMBERRear Guard – Right Outer, Left Inner 2 187-9317Rear Guard – Left Outer, Right Inner 2 187-9318Bolt 8 8T-4140Bolt 8 7X-2559Washer 16 8T-4122Wear Strip 4 192-3184Bolt 34 8T-4139Washer 42 8T-4223Plate Assembly 2 8Y-1990Plate 2 8Y-1994Plate 2 8Y-1993Bolt 8 8T-4192

953D TRACK ROLLER GUARDS (FULL LENGTH)(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 254-5290Guard Assembly 2 254-5291Bolt (M16) (Guard Assembly to Frame) 16 8T-4779Washer 16 8T-4122Spacer 8 7P-7368Rod 8 8Y-2281Washer 16 8T-4122Nut 16 8T-4132Plate 8 259-6864Bolt (M12) (Plate to End Guard) 16 8T-4956Washer 16 8T-4223

953C/B TRACK ROLLER GUARDS (FULL LENGTH)(PER MACHINE) QUANTITY PART NUMBERGuard AssemblyRight Outer, Left Inner 1 8Y-2276

449

953D, 953C, 953B, 953953C/B TRACK ROLLER GUARDS (FULL LENGTH) (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERLeft Outer, Right Inner 1 8Y-2279Bolt 16 8T-4779Washer 16 8T-4122Spacer 8 7P-7368Rod 8 8Y-2281Nut 16 8T-4132Washer 16 8T-4122Plate 8 8Y-2210Bolt 16 8T-4183Washer 16 8T-4223Strip 4 8Y-2211Strip 4 8Y-2212

953 TRACK ROLLER GUARDS (FULL LENGTH)(PER MACHINE) QUANTITY PART NUMBERGuard AssemblyRight Outer, Left Inner 1 7P-7369Left Outer, Right Inner 1 7P-7373Bolt 16 7X-0343Washer 16 8T-4122Spacer 8 7P-7368Bolt 8 5P-4624Nut 8 7X-0488Washer 16 8T-4122Plate 8 8G-4077Bolt 16 8T-4835Spacer 16 5F-7207

953D SystemOne IDLER GUARDSCONVENTIONAL IDLERS

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 8Y-2429Bolt (M12) 12 8T-4139Washer 12 5P-1076Guard Assembly 2 261-7105Guard Assembly 2 264-7098Guard Assembly 2 264-7099Bolt (M12) 12 8T-4192Bolt (M12) 8 8T-4194Washer 20 5P-1076

450

953D, 953C, 953B, 953953D SystemOne IDLER SCRAPER

(PER MACHINE) QUANTITY PART NUMBERGuard - Scraper 4 7P-7732Bolt (M12) 12 8T-4139Washer 12 8T-4223

451


HYBRID LINKS13X, 57M, 64J9258-UP, 71J5832, 85J10129-UP


Link Assembly – 36 Section 2 236-9861Track LinksRH Pin End Master 1 228-2737LH Pin End Master 1 228-2738RH Bushing End Master 1 228-2739LH Bushing End Master 1 228-2740RH Regular 35 228-2735LH Regular 35 228-2736Other ComponentsPin 36 160-7819 (1)


Bolt 140 1S-1859Nut 140 1S-1860Master Bolt 4 9S-1838Special Sets/GroupsSeal Set (90 Seal Assemblies) 1 256-9360Bushing and Seal Group (37 Sections) 1 293-9147

955 SEALED AND LUBRICATED TRACK13X, 57M, 64J9258-UP, 71J5832, 85J10129-UP

8.00" (203.2 mm) PITCH – 3/4" BOLT


Track LinksRH Pin End Master 1 6Y-6743LH Pin End Master 1 6Y-6744RH Bushing End Master 1 6Y-6745LH Bushing End Master 1 6Y-6746RH Regular 35 3P-1112LH Regular 35 3P-1113Other Components

1 Former pin 3P-1108 (use 9G-1642 stopper).2 Not part of link assembly; required to assemble track group.3 Service replaced by 236-9861 hybrid link assembly.

452

955955 SEALED AND LUBRICATED TRACK13X, 57M, 64J9258-UP, 71J5832, 85J10129-UP8.00" (203.2 mm) PITCH – 3/4" BOLT(Cont'd.)

QUANTITY PART NUMBERPin 36 160-7819 (4)

Bushing 36 8E-5257Seal Assembly (Rigid) 72 250-3996Thrust Ring 72 3P-1104Stopper 36 5G-2247Plug 36 6Y-0473Track Hardware (5)


955 SEALED TRACKHYBRID TWO PIECE MASTER LINK

13X, 57M, 64J9258-UP, 71J5832, 85J10129-UP8.00" (203.2 mm) PITCH – 3/4" BOLT

QUANTITY PART NUMBERLink Assembly – 36 Section 2 238-9951Track LinksRH Pin End Master 1 228-2737LH Pin End Master 1 228-2738RH Bushing End Master 1 228-2739LH Bushing End Master 1 228-2740RH Regular 35 228-2735LH Regular 35 228-2736Other ComponentsPin 36 4M-5989Bushing 36 237-7305Seal-Washer 144 8M-7231Track Hardware (5)

Bolt 140 1S-1859Nut 140 1S-1860Master Bolt 4 9S-1838

4 Former pin 3P-1108 (use 9G-1642 stopper).5 Not part of link assembly; required to assemble track group.

453

955955 SEALED TRACKTWO PIECE MASTER LINK



Track LinksRH Pin End Master 1 6Y-6743LH Pin End Master 1 6Y-6744RH Bushing End Master 1 6Y-6745LH Bushing End Master 1 6Y-6746RH Regular 35 3P-1112LH Regular 35 3P-1113Other ComponentsPin 36 4M-5989Bushing 36 4M-5991Seal 144 8M-7231Track Hardware (7)

Bolt 140 1S-1859Nut 140 1S-1860Master Bolt 4 9S-1838Special Sets/GroupsPin and Bushing Group (36 Sections) 1 6P-4235

955 SEALED TRACKHYBRID ONE PIECE MASTER LINK


QUANTITY PART NUMBERLink Assembly – 36 Section 2 238-9950Track LinksRH Master 1 240-2503LH Master 1 240-2504RH Regular 35 228-2735LH Regular 35 228-2736Other ComponentsPin 35 4M-5989Master Pin 1 8E-0855Bushing 35 237-7305Master Bushing 1 237-7306Seal 144 8M-7231Spacer 2 8M-7290Track Hardware (7)

6 Service replaced by 238-9951 hybrid link assembly.7 Not part of link assembly; required to assemble track group.

454

955955 SEALED TRACKHYBRID ONE PIECE MASTER LINK13X, 57M, 64J9258-UP, 71J5832, 85J10129-UP8.00" (203.2 mm) PITCH – 3/4" BOLT(Cont'd.)

QUANTITY PART NUMBERBolt 144 1S-1859Nut 144 1S-1860

955 SEALED TRACKNO MASTER LINK



Track LinksRH Regular 36 3P-1112LH Regular 36 3P-1113Other ComponentsPin 35 4M-5989Master Pin 1 8E-0855Bushing 35 4M-5991Master Bushing 1 4M-5992Seal 144 8M-7231Spacer 2 8M-7290Track Hardware (9)

Bolt 144 1S-1859Nut 144 1S-1860Special Sets/GroupsPin and Bushing Group (36 Sections) 1 6P-4235

955 EXTENDED WEAR LIFE TRACKRIGID SEAL, LARGE O.D. BUSHING

13X, 57M, 64J9258-UP, 71J5832-UP, 85J10129-UP8.00" (203.2 mm) PITCH – 3/4" BOLT


Track LinksRH Pin End Master 1 6Y-6747LH Pin End Master 1 6Y-6748RH Bushing End Master 1 6Y-6749LH Bushing End Master 1 6Y-6750RH Regular 35 7T-4645

8 Upgrade to 238-9950 Hybrid One Piece Master Link Assembly.9 Not part of link assembly; required to assemble track group.10 Serviced replaced by 236-9861 Hybrid link assembly.

455

955955 EXTENDED WEAR LIFE TRACKRIGID SEAL, LARGE O.D. BUSHING13X, 57M, 64J9258-UP, 71J5832-UP, 85J10129-UP8.00" (203.2 mm) PITCH – 3/4" BOLT(Cont'd.)

QUANTITY PART NUMBERLH Regular 35 7T-4646Other ComponentsPin 36 160-7819 (11)

Bushing 36 8E-5257 (12)



955 SEALED AND LUBRICATED TRACK31J, 48H, 57J, 60A, 61H, 64J1-9257, 71J1-5831, 72A, 77A, 85J1-10128, 93A

6.91" (175.5 mm) PITCH – 5/8" BOLT

PART NUMBER 39 SECTION 41 SECTIONLink Assembly (Quantity 2) 154-3672 154-3667Track LinksRH Pin End Master 3P-3043 1 1LH Pin End Master 3P-3044 1 1RH Bushing End Master 3P-3045 1 1LH Bushing End Master 3P-3046 1 1RH Regular 3P-7153 38 40LH Regular 3P-7154 38 40Other ComponentsPin 160-7818 (14) 39 41Bushing 7T-4636 (15) 39 41Seal Assembly (Rigid) 250-3990 78 82Thrust Ring 3P-3878 78 82Stopper 5G-2247 39 41

11 Former pin 3P-1108 (use 9G-1642 stopper)12 If small O.D. bushing is required, use 3P-1109.13 Not part of link assembly; required to assemble track group14 Former pin 3P-3880 (use 9G-1642 stopper)15 Service straight wall bushing track with 3P-3879 bushing.

456

955955 SEALED AND LUBRICATED TRACK31J, 48H, 57J, 60A, 61H, 64J1-9257, 71J1-5831, 72A, 77A, 85J1-10128, 93A6.91" (175.5 mm) PITCH – 5/8" BOLT(Cont'd.)

PART NUMBER 39 SECTION 41 SECTIONLink Assembly (Quantity 2) 154-3672 154-3667Plug 6Y-0473 39 41Track Hardware (16)

Bolt 7H-3597 152 160Nut 1M-1408 152 160Master Bolt 3P-2274 4 4Special Sets/GroupsBushing and Seal Group (46 Sections) 154-3659 1 1Seal Set (92 Seal Assemblies) 252-7859 1 1

955 SEALED TRACK31J, 48H, 57J, 60A, 61H, 64J1-9257, 71J1-5831, 72A, 77A, 85J1-10128, 93A

6.91" (175.5 mm) PITCH – 5/8" BOLT

PART NUMBER 39 SECTION 41 SECTIONLink Assembly (Quantity 2) 3P-5757 1V-7077Track LinksRH Pin End Master 3P-3043 1 1LH Pin End Master 3P-3044 1 1RH Bushing End Master 3P-3045 1 1LH Bushing End Master 3P-3046 1 1RH Regular 3P-7153 38 40LH Regular 3P-7154 38 40Other ComponentsPin 6B-5502 39 41Bushing 5S-0710 39 41Seal 5S-0709 156 164Track Hardware (16)

Bolt 7H-3597 152 160Nut 1M-1408 152 160Master Bolt 3P-2274 4 4Special Sets/GroupsPin and Bushing Group (38 Sections) 6P-4234 1 1


457

955955 SEALED TRACKONE PIECE MASTER LINK

31J, 48H, 57J, 60A, 61H, 64J1-9257, 71J1-5831, 72A, 77A, 85J1-10128, 93A6.91" (175.5 mm) PITCH – 5/8" BOLT


Track LinksRH Master (Full) 1 3P-7155LH Master (Full) 1 3P-7156RH Regular 38 3P-7153LH Regular 38 3P-7154Other ComponentsPin 38 6B-5502Master Pin 1 8M-7456Bushing 38 5S-0710Master Bushing 1 5S-0753Seal 156 5S-0709Spacer 2 5S-0754Track Hardware (18)





Double Grouser 17.0" (430 mm) 8E-4501 8E-4502Triple Grouser 17.0" (430 mm) 2V-5114 8E-4502 (19)




Double Grouser 15.0" (380 mm) 8E-4724 8E-4725Triple Grouser 15.0" (380 mm) 175-8553 8E-4725 (19)

17 Upgrade to 39 section 3P-5757 link assembly or 41 section 1V-7077 link assembly..18 Not part of link assembly; required to assemble track group.19 Double Grouser Master - Trim grouser to match triple grouser height.

458

955955 SPROCKETS85J10129-UP, 13X *8.00" (203.2 mm) PITCH


Mud/Snow Segment (5 Tooth) 5 8P-9454Bolt 20 3S-8182Nut 20 7H-3607* Use 3V-2093 Sprocket Hub for attachment wide gauge.

955 SPROCKETS48H, 53H, 31J, 57J, 64J, 71J, 61H, 85J1-10128

6.91" (175.5 mm) PITCH

(PER SIDE) QUANTITY PART NUMBERSprocket Hub 1 7K-1311 (20)

Sprocket Segment (4 Tooth) 5 6T-7455Sprocket Segment (3 Tooth) 3 6T-7456Adapter Ring 1 6K-1261Bolt 29 3S-8182Nut 29 7H-3607

955 IDLERS85J10129-UP, 71J5832-UP, 64J9258-UP, 13X, 57M

8.00" (203.2 mm) PITCH

(PER MACHINE) QUANTITY PART NUMBERIdler Assembly 2 5M-5009Extended Wear Idler Assembly (21) 2 7T-4562Other ComponentsBushing Assembly 2 3P-1900Bearing (22) 1 8P-5197Shaft 1 5M-5005Bearing Block 1 5M-5003Bearing Block 1 5M-5004Seal – Duo-Cone Group 2 6Y-0925Toric Ring (22) 2 8H-2262Bushing O-Ring 2 1H-6227Shaft O-Ring 2 5F-8000Bolt 12 0S-1588Washer 12 3B-4506Plug 1 2P-0347

20 Service replacement Classic 224-1313.21 For use with extended wear life track.22 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

459

955955 IDLERS85J10129-UP, 71J5832-UP, 64J9258-UP, 13X, 57M8.00" (203.2 mm) PITCH(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERSpecial Application SealsSeal – Duo-Cone Group (Steel Mill) 2 4S-8984Toric Ring (23) 2 9M-9730Bushing O-Ring (Steel Mill) 2 2S-2182Shaft O-Ring (Steel Mill) 2 8M-4436

955 IDLERS61H, 48H, 31J, 85J1-10128, 71J1-5831, 64J1-9257

6.91" (175.5 mm) PITCH


Other ComponentsBushing Assembly 2 3P-8272Bearing (23) 1 8P-6652Shaft 1 5M-1913Seal – Duo-Cone Group 2 9W-5224Toric Ring (23) 2 1M-3097Bushing O-Ring 2 1H-6227Shaft O-Ring 2 7F-8267Bolt 12 0S-1587Washer 12 3B-4508Plug 1 2B-7408Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 5K-6191Toric Ring (23) 2 2S-2181Bushing O-Ring 2 2S-2182Shaft O-Ring 2 8M-5661

955 CARRIER ROLLERS13X, 57M, 64J9258-UP, 85J10129-UP, 71J5832-UP 6.91" (175.5 mm) PITCH: 60A, 72A, 77A, 93A, 48H, 53H, 61H, 31J, 57J, 64J1-9257, 85J1-

10128, 71J1-58318.00" (203.2 mm) PITCH

(PER MACHINE) QUANTITY PART NUMBERGroup 2 5A-8374Components of GroupRoller Shell 1 5A-8375

23 Component of preceding assembly or group; quantity shown is quantity per assembly or group.24 Serviced Replaced By - 7T-3501.

460

955955 CARRIER ROLLERS13X, 57M, 64J9258-UP, 85J10129-UP, 71J5832-UP 6.91" (175.5 mm) PITCH: 60A, 72A, 77A, 93A, 48H, 53H, 61H, 31J, 57J, 64J1-9257, 85J1-10128, 71J1-58318.00" (203.2 mm) PITCH(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERShaft 1 3T-3207Cup 2 9S-3581Cone 2 9S-3582Ring 1 1M-7914Cover 1 5M-2043Collar 1 9S-3567Plug 1 2P-0347Bolt 3 0S-1594Plate 1 8P-6188Bolt 2 5K-9107Seal – Duo-Cone Group 1 6Y-0925Toric Ring (25) 2 8H-2262Seal – Cover 1 2H-6338Seal – Plug 1 1S-8947Seal – Shaft O-Ring 1 1H-9696Special Application SealsSeal – Duo-Cone Group (Steel Mill) 1 4S-8984Toric Ring (25) 2 9M-9730

955 STANDARDIZED TRACK ROLLERS64J9258-UP, 85J10129-UP, 13X, 71J5832-UP, 57M

8.00" (203.2 mm) PITCH



Double (DF) (Arctic) 6 288-0946Single Flange (SF) (Arctic) 6 288-0945

Double Flange (DF) (High Heat) 6 288-0948


Mounting Hardware (3/4") (26)

Cap 2 317-9079Bolt (3/4") 4 1D-4610Washer 4 5P-8248Mounting Hardware (5/8") (26)

Cap 2 317-9078

25 Component of preceding group; quantity shown is the quantity per group.26 These components are not included in the roller group; quantities shown are required to mount each roller.

461

955955 STANDARDIZED TRACK ROLLERS64J9258-UP, 85J10129-UP, 13X, 71J5832-UP, 57M8.00" (203.2 mm) PITCH(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERBolt (5/8") 4 1D-4585Washer 4 2S-0736

955 TRACK ROLLERS64J9258-UP, 85J10129-UP, 13X, 71J5832-UP, 57M

8.00" (203.2 mm) PITCH



Extended Wear Life (DF) (Requires 3/4" mounting hardware) (29) 6 118-1635 (30)

Extended Wear Life (SF) (Requires 3/4" mounting hardware) (29) 6 118-1634 (31)

Components of GroupRoller Shell (DF) 1 6Y-2904 (27)

Roller Shell (SF) 1 6Y-2902 (28)

Extended Wear Life Shell (DF) (29) 1 9W-5411 (30)

Extended Wear Life Shell (SF) (29) 1 9W-5408 (31)



Bolt 12 2P-3201Seal – Duo-Cone Group 2 6Y-0925Toric Ring (32) 2 8H-2262Seal – Bushing O-Ring 2 2H-3928Seal – Shaft O-Ring 2 5F-8000Stopper 1 7G-4332Plug 1 6Y-0473Ring 2 5M-4443Mounting Hardware (35)

Bolt (5/8") 4 1A-8537

27 Serviced Replaced By: 1 - Roller Group (DF) 288-0935, 2 - End Cap 317-9078, 4 - Bolt 1D-4585, 4 - Washer 2S-0736.28 Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-9078, 4 - Bolt 1D-4585, 4 - Washer 2S-0736.29 For use with Extended Wear Life Track.30 Serviced Replaced By: 1 - Roller Group (DF) 288-0935, 2 - End Cap 317-9079, 4 - Bolt 1D-4610, 4 - Washer 5P-8248.31 Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-9079, 4 - Bolt 1D-4610, 4 - Washer 5P-8248.32 Component of preceding assembly or group; quantity shown is per assembly or group.33 Replaces former 5M-4448 shaft; requires 2 - 5M-4436 end collars. Serviced Replaced By: 1 - Roller Group (DF) 288-0935, or 1 - Roller

Group (SF) 288-0934; AND 3/4" hardware 2 - End Cap 317-9079, 4 - Bolt 1D-4610, 4 - Washer 5P-8248, OR 5/8" hardware 2 - End Cap 317-9078, 4 - Bolt 1D-4585, 4 - Washer 2S-0736.

34 If 5M-4448 shaft is used, use 1 – 5M-4436 and 1 – 5M-4435 end collar.35 These components are not included in the roller group; quantities shown are required to mount each roller.

462

955955 TRACK ROLLERS64J9258-UP, 85J10129-UP, 13X, 71J5832-UP, 57M8.00" (203.2 mm) PITCH(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERWasher 4 2S-0736Special Application SealsSeal – Duo-Cone Group (Steel Mill) 2 4S-8984Toric Ring (36) 2 9M-9730Bushing O-Ring (Steel Mill) 2 8S-5654Shaft O-Ring (Steel Mill) 2 8M-4436

955 TRACK ROLLERS60A, 72A, 77A, 93A, 48H, 53H, 61H, 31J, 64J1-9257, 85J1-10128, 71J1-5831

6.91" (175.5 mm) PITCH





Bushing Assembly 2 2P-8045Bearing (36) 1 8S-5796Shaft 1 118-1613 (39)


Bolt 12 2P-3201Seal – Duo-Cone Group 2 9W-5224Toric Ring (36) 2 1M-3097Seal – Bushing O-Ring 2 1H-6227Seal – Shaft O-Ring 2 7F-8267Stopper 1 7G-4332Plug 1 6Y-0473Ring 2 6H-7382Mounting Hardware (41)

Bolt 4 8S-9092Washer 4 5P-8247Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 5K-6191

36 Component of preceding assembly or group; quantity shown is per assembly or group.37 Serviced Replaced By: 1 - Roller Group (DF) 310-4915, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247.38 Serviced Replaced By: 1 - Roller Group (SF) 310-4912, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247.39 Serviced Replaced By: 1 - Roller Group (SF) 310-4912, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247. Serviced Replaced By:

1 - Roller Group (DF) 310-4915, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247.40 If 5M-1915 shaft is used, use 1 – 5M-0627 and 1 – 1M-3812 end collar.41 These components are not included in the roller group; quantities shown are required to mount each roller.

463

955955 TRACK ROLLERS60A, 72A, 77A, 93A, 48H, 53H, 61H, 31J, 64J1-9257, 85J1-10128, 71J1-58316.91" (175.5 mm) PITCH(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERToric Ring (42) 2 2S-2181Bushing O-Ring 2 2S-2182Shaft O-Ring 2 8M-5661

955 END GUIDING GUARDS64J9258-UP, 85J10129-UP, 71J15832-UP, 13X, 57M

(PER MACHINE) QUANTITY PART NUMBERFront (Outer LH, Inner RH)Guard Assembly 1 1V-8176Wear Strip 1 7K-3703Bolt 4 5K-8454Front (Outer RH, Inner LH)Guard Assembly 1 1V-8173Wear Strip 1 7K-3703Bolt 4 5K-8454Rear (Outer RH)Guard Assembly 1 1V-8187Wear Strip 1 7K-3704Bolt 4 5K-8454Rear (Outer LH)Guard Assembly 1 1V-8202Wear Strip 1 7K-3704Bolt 4 5K-8454

955 END GUIDING GUARDS48H, 53H, 61H, 31J, 57J, 64J1-9257, 85J1-10128, 71J1-5831

(PER MACHINE) QUANTITY PART NUMBERFront (Outer LH, Inner RH)Guard Assembly 1 7K-3712Wear Strip 1 7K-3703Bolt 4 5K-8454Front (Outer RH, Inner LH)Guard Assembly 1 7K-3711Wear Strip 1 7K-3703Bolt 4 5K-8454Rear (Outer RH)

42 Component of preceding assembly or group; quantity shown is per assembly or group.

464

955955 END GUIDING GUARDS48H, 53H, 61H, 31J, 57J, 64J1-9257, 85J1-10128, 71J1-5831(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 1 7K-3713Wear Strip 1 7K-3704Bolt 4 5K-8454Rear (Outer LH)Guard Assembly 1 7K-3714Wear Strip 1 7K-3704Bolt 4 5K-8454

955 CENTER GUIDING GUARDS64J9258-UP, 71J5832-UP, 85J10129-UP, 13X, 57M

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 1P-0963 (43)

Wear Strip 4 3V-1133 (44)

Bolt 8 6H-1717Lock Washer 16 3B-4508Bolt 16 1D-4608

955 CENTER GUIDING GUARDS48H, 53H, 61H, 31J, 57J, 64J1-9257, 71J1-5831, 85J1-10128

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 7K-4347Lock Washer 16 4D-3704Bolt 16 031-0221

43 Classic Optional service replacement 226-0179.44 Classic Optional service replacement 226-0203.

465

963D, 963C, 963B, 963963D SystemOne TRACK

PRESS FIT MASTERLCS


Link Assembly - 38 Section 2 256-9612Components of Link AssemblyLink Box Standard 19 351-0955 (1)

Standard Link 36 234-9699Standard Link (Press Fit) (2) 2 234-9699Track Hardware (2)

Bolt (22 mm) 152 6Y-9024Nut 152 9W-4381

963D SystemOne TRACKCLAMP MASTER

LCS8.00" (203.2 mm) PITCH - 22 mm BOLT


Standard Link 36 234-9699Standard Link (Clamp Master) (2) 2 318-1064Track Hardware (2)

Bolt (22 mm) 148 6Y-9024Nut 148 9W-4381Master Bolt (22 mm) 4 254-0224

963C/B, 963 SystemOne TRACKPRESS FIT MASTER

8.00" (203.2 mm) PITCH - 22 mm BOLT



Standard Link 34 234-9699Standard Link (Press Fit) (2) 2 234-9699Track Hardware (2)

Bolt (22 mm) 148 6Y-9024Nut 148 9W-4381

1 Link Box Standard that is greater than 40% worn should be replaced with part number 351-0963.2 Not part of link assembly; required to assemble track group.3 Link Box Offset that is greater than 40% worn should be replaced with part number 351-0964.

466

963D, 963C, 963B, 963963C/B, 963 SystemOne TRACK

CLAMP MASTER8.00" (203.2 mm) PITCH - 22 mm BOLT



Standard Link 34 234-9699Standard Link (Clamp Master) (6) 2 318-1064Track Hardware (6)

Bolt (22 mm) 144 6Y-9024Nut 144 9W-4381Master Bolt (22 mm) 4 254-0224

963D HYBRID TRACKLARGE O.D. BUSHING

LCS8.00" (203.2 mm) PITCH – 3/4" BOLT



Bolt 148 1S-1859Nut 148 1S-1860Master Bolt 4 9S-1838

4 Link Box Standard that is greater than 40% worn should be replaced with part number 351-0963.5 Link Box Offset that is greater than 40% worn should be replaced with part number 351-0964.6 Not part of link assembly; required to assemble track group.7 Former pin 3P-1108 (Use 9G-1642 Stopper)

467

963D, 963C, 963B, 963963C, 963B, 963 HYBRID TRACK

LARGE O.D. BUSHING11Z, 18Z, 2DS, 21Z, 29S, 48Z, 6Z, 9BL, BBD8.00" (203.2 mm) PITCH – 3/4" BOLT



Bolt 144 1S-1859Nut 144 1S-1860Master Bolt 4 9S-1838Special Sets/GroupsSeal Set (90 Seal Assemblies) 1 256-9360Bushing and Seal Groups (37 Sections) 1 293-9147

963C, 963B, 963 MADE TO ORDER (MTO) TRACK GROUPSTRACK GROUPS NOT STOCKED IN DISTRIBUTION FACILITIES


963C, 963B, 963 TRACKLARGE O.D. BUSHING

11Z, 18Z, 2DS, 21Z, 29S, 48Z, 6Z, 9BL8.00" (203.2 mm) PITCH – 3/4" BOLT


Track LinksRH Pin End Master 1 6Y-6747

8 Former pin 3P-1108 (Use 9G-1642 Stopper)9 Not part of link assembly; required to assemble track group.10 Serviced replaced by 230-6167 hybrid link assembly.

468

963D, 963C, 963B, 963963C, 963B, 963 TRACKLARGE O.D. BUSHING11Z, 18Z, 2DS, 21Z, 29S, 48Z, 6Z, 9BL8.00" (203.2 mm) PITCH – 3/4" BOLT(Cont'd.)

QUANTITY PART NUMBERLH Pin End Master 1 6Y-6748RH Bushing End Master 1 6Y-6749LH Bushing End Master 1 6Y-6750RH Regular 36 7T-4645LH Regular 36 7T-4646Other ComponentsPin 37 160-7819 (11)

Bushing 37 8E-5257Seal Assembly (Rigid) 74 250-3996Thrust Ring 74 3P-1104Stopper 37 5G-2247Plug 37 6Y-0473Track Hardware (12)


963B, 963 TRACKSMALL O.D. BUSHING

11Z, 18Z, 21Z, 29S, 48Z, 6Z, 9BL8.00" (203.2 mm) PITCH – 3/4" BOLT


Track LinksRH Pin End Master 1 6Y-6747LH Pin End Master 1 6Y-6748RH Bushing End Master 1 6Y-6749LH Bushing End Master 1 6Y-6750RH Regular 36 7T-4645LH Regular 36 7T-4646Other ComponentsPin 37 160-7819 (11)

Bushing 37 3P-1109

11 Former pin 3P-1108 (Use 9G-1642 Stopper)12 Not part of link assembly; required to assemble track group.13 Upgrade to 117-1023 Link Assembly.

469

963D, 963C, 963B, 963963B, 963 TRACKSMALL O.D. BUSHING11Z, 18Z, 21Z, 29S, 48Z, 6Z, 9BL8.00" (203.2 mm) PITCH – 3/4" BOLT(Cont'd.)

QUANTITY PART NUMBERSeal Assembly (Rigid) 74 250-3996Thrust Ring 74 3P-1104Stopper 37 5G-2247Plug 37 6Y-0473Track Hardware (14)

Bolt 144 1S-1859Nut 144 1S-1860Master Bolt 4 9S-1838Special Sets/GroupsBushing and Seal Group (36 Sections) (15) 1 6I-8061Seal Set (86 Seal Assemblies) 1 252-7857

963D SystemOne TRACK SHOES8.00" (203.2 mm) PITCH - 22 mm BOLT



Double Grouser 17.7" (450 mm) 231-3713 256-4971Double Grouser 21.7" (550 mm) 292-6379 292-6380Double Grouser (Center Hole) 21.7" (550 mm) 292-6381 369-4574

963C/B, 963 SystemOne TRACK SHOES8.00" (203.2 mm) PITCH - 22 mm BOLT



Double Grouser 17.7" (450 mm) 231-3713 256-4971Double Grouser (Center Opening) 17.7" (450 mm) 280-8722 –

Double Grouser 22.0" (560 mm) 231-3712 256-4970Double Grouser (Center Opening) 22.0" (560 mm) 285-4296 –

Single Grouser - Extreme Service(Center Opening)

18.0" (460 mm) 264-1108 369-4573

14 Not part of link assembly; required to assemble track group.15 Contains 8E-5257 large O.D. bushings and rigid track seals.

470

963D, 963C, 963B, 963963C, 963B, 963 TRACK SHOES

8.00" (203.2 mm) PITCH – 3/4" BOLT



Single Grouser - Extreme Service 18.0" (460 mm) 6Y-6393 6Y-6392Single Grouser - Extreme Service(Trapezoidal Opening)

18.0" (460 mm) 1Q-4985 1Q-4984

Single Grouser - Moderate Service 18.0" (460 mm) 6Y-6289 6Y-6290Single Grouser - Moderate Service(Trapezoidal Opening)

18.0" (460 mm) 1Q-4921 1Q-4922

Double Grouser 17.7" (450 mm) 8E-4494 8E-4495Double Grouser (Trapezoidal Opening) 17.7" (450 mm) 1Q-4610 1Q-4609Double Grouser (Trapezoidal Opening) (16) 21.7" (550 mm) 1Q-4640 1Q-4641Double Grouser (16) 21.0" (535 mm) 8E-4499 8E-4500Double Grouser (16) 21.7" (550 mm) 8E-4496 8E-4497Triple Grouser 16.9" (430 mm) 2V-5114 8E-4502 (17)

Chopper (Trapezoidal Opening) 17.7" (450 mm) 8E-6977 8E-6978

963D SystemOne SPROCKETS(PER SIDE) QUANTITY PART NUMBERSprocket Segment (5 Tooth) 5 308-6854Bolt 25 3S-8182Nut 25 7H-3607

963D HYBRID AND SEALED AND LUBRICATED TRACK SPROCKETS(PER SIDE) QUANTITY PART NUMBERSprocket Segment (5 Tooth) 5 363-4367Bolt 25 3S-8182Nut 25 7H-3607

963C, 963B, 963 SPROCKETSSystemOne, Hybrid, Rotating Bushing, and Sealed and Lubricated Track

(PER SIDE) QUANTITY PART NUMBERSprocket Segment (Tough Steel) (5 Tooth) 5 197-9673

Sprocket Segment (5 Tooth) 5 258-9797Bolt 20 3S-8182Nut 20 7H-3607

16 LGP use only17 Double Grouser shoe - Trim grouser to match triple grouser height.

471

963D, 963C, 963B, 963963D SystemOne IDLERS

CONVENTIONAL IDLERS(PER MACHINE) QUANTITY PART NUMBERIdler Assembly 2 7T-4562Other ComponentsBushing Assembly 2 3P-1900Bearing (18) 1 8P-5197Shaft 1 255-8060Lock 2 5M-5000Bolt 2 7X-0318Washer 2 7X-0563Seal – Duo-Cone Group 2 1M-8747Toric Ring (18) 2 8H-2262Seal – Shaft O-Ring 2 1H-5728Seal – Bushing O-Ring 2 1H-6227Bolt 12 9B-7237Washer 12 8T-4896Stopper 1 7G-4332Plug 1 6Y-0473Swing Link 1 286-4226Swing Link 1 286-4227Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 4S-8984Toric Ring (18) 2 9M-9730Seal – Shaft O-Ring 2 8M-4395Seal – Bushing O-Ring 2 2S-2182Stopper 1 3T-3800Plug 1 3T-3799

963C/B, 963 SystemOne CENTER TREAD IDLER(PER MACHINE) QUANTITY PART NUMBERIdler 2 228-4231Other ComponentsBushing Assembly 2 3P-1900Bearing (18) 1 8P-5197Shaft 1 8G-1450 (19)

Lock 2 5M-5000Bolt 2 7X-0318Washer 2 7X-0563Seal – Duo-Cone Group 2 6V-1915Toric Ring (18) 1 8H-2262

18 Component of preceding group; quantity shown is the quantity per group.19 Service Replaced by 255-8060.

472

963D, 963C, 963B, 963963C/B, 963 SystemOne CENTER TREAD IDLER (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERO-Ring (20) 1 6V-1914Bushing O-Ring 2 1H-6227Bolt 12 9B-7237Washer 12 8T-4896Stopper 1 7G-4332Plug 1 6Y-0473Swing Link 1 8Y-2203Swing Link 1 8Y-2204Plate - Scraper (Mounts to Yoke) 1 258-6544

Plate - Scraper (Mounts to Yoke) 1 259-1072Bolt (12 mm) 4 8T-4139Washer 4 5P-1076Shim (Install between TRF and Idler Guards) 2 255-5983Bolt (20 mm) 2 8T-4187Bolt (20 mm) 4 8T-6381Washer 6 8T-4123Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 9W-1059Toric Ring (20) 1 9M-9730O-Ring (20) 1 9W-1057Bushing O-Ring 2 2S-2182Stopper 1 3T-3800Plug 1 3T-3799

963C, 963B, 963 IDLERS(PER MACHINE) QUANTITY PART NUMBERIdler Assembly 2 7T-4562Other ComponentsBushing Assembly 2 3P-1900Bearing (20) 1 8P-5197Shaft 1 8G-1450 (21)

Lock 2 5M-5000Bolt 2 7X-0318Washer 2 7X-0563Seal – Duo-Cone Group 2 6V-1915Toric Ring (20) 1 8H-2262O-Ring (20) 1 6V-1914Bushing O-Ring 2 1H-6227

20 Component of preceding group; quantity shown is the quantity per group.21 Service Replaced by 255-8060.

473

963D, 963C, 963B, 963963C, 963B, 963 IDLERS (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERBolt 12 9B-7237Washer 12 8T-4896Stopper 1 7G-4332Plug 1 6Y-0473Swing Link 1 8Y-2203Swing Link 1 8Y-2204Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 9W-1059Toric Ring (22) 1 9M-9730O-Ring (22) 1 9W-1057Bushing O-Ring 2 2S-2182Stopper 1 3T-3800Plug 1 3T-3799

963D/C/B, 963 SystemOne CARRIER ROLLERS(PER MACHINE) QUANTITY PART NUMBERCarrier Roller Group 4 235-5974

963C, 963B, 963 CARRIER ROLLERSLARGE DIAMETER SHAFT21Z3442-UP, 2DS, 9BL, BBD

(PER MACHINE) QUANTITY PART NUMBERGroup 2 6Y-1781 (23)

Components of GroupRoller Shell 1 9S-8320Shaft 1 6Y-2043Cup 2 9S-3581Cone 2 9S-3582Ring 1 7H-4574Cover 1 5M-2043Collar 1 7H-4571Plug 1 2P-0347Bolt 3 0S-1594Bolt 2 5K-9107Plate 1 8P-6188Seal – Duo-Cone Group 1 6Y-0925Toric Ring (22) 2 8H-2262Seal – Cover 1 2H-6338

22 Component of preceding group; quantity shown is the quantity per group.23 Service Replaced By 235-5974 Carrier Roller Gp.

474

963D, 963C, 963B, 963963C, 963B, 963 CARRIER ROLLERSLARGE DIAMETER SHAFT21Z3442-UP, 2DS, 9BL, BBD(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERSeal – Plug 1 1S-8947Seal – Shaft O-Ring 1 1H-8720Special Application SealsSeal – Duo-Cone Group (Steel Mill) 1 4S-8984Toric Ring (24) 2 9M-9730

963 CARRIER ROLLERSSMALL DIAMETER SHAFT

11Z, 18Z, 21Z1-3441, 29S, 48Z, 6Z

(PER MACHINE) QUANTITY PART NUMBERGroup 2 3T-3206Components of GroupRoller Shell 1 9S-8320Shaft 1 3T-3207Cup 2 9S-3581Cone 2 9S-3582Ring 1 1M-7914Cover 1 5M-2043Collar 1 9S-3567Plug 1 2P-0347Bolt 3 0S-1594Bolt 2 5K-9107Plate 1 1M-7913Seal – Duo-Cone Group 1 6Y-0925Toric Ring (25) 2 8H-2262Seal – Cover 1 2H-6338Seal – Plug 1 1S-8947Seal – Shaft O-Ring 1 1H-9696Special Application SealsSeal – Duo-Cone Group (Steel Mill) 1 4S-8984Toric Ring (25) 2 9M-9730

24 Component of preceding group; quantity shown is the quantity per group.25 Component of preceding group; quantity shown is the quantity per group

475

963D, 963C, 963B, 963963D/C/B, 963 SystemOne TRACK ROLLERS

(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) Roller Group – (26) 235-4157


Cap (20 mm) 2 317-9080Bolt (20 mm) 4 8T-0360Washer 4 8T-3282Cap (3/4") 2 317-9079Bolt (3/4") 4 1D-4610Washer 4 5P-8248

963C/B STANDARDIZED TRACK ROLLERS WITH END CAPSQUANTITY PART NUMBER

Double Flange (DF) 6 288-0935


Double Flange (DF) (Arctic) 6 288-0946


Double Flange (DF) (High Heat) 6 288-0948


Double Flange (DF) (Tall) – (28) 288-0936

Mounting Hardware (Metric Hardware) (27)

Cap 2 317-9080Bolt (20 mm) 4 8T-0360Washer 4 8T-3282Mounting Hardware (Inch Hardware) (27)


963C, 963B TRACK ROLLERSCURRENT DESIGN (END COLLARS, SYMMETRIC SEALS)

2DS, 9BL, BBD



26 963D requires 14 roller groups, 963C/B, 963 requires 12 roller groups.27 These components are not included in the roller group; quantities shown are required to mount each roller.28 Optional (DF) roller for guiding. Use quantity required for specific roller frame type.29 For 963 with Metric Hardware Serviced Replaced By: 1 - Roller Group (DF) 288-0935, 2 - End Cap 317-9080, 4 - Bolt 8T-0360, 4 - Washer

8T-3282. For 963 with Inch Hardware Serviced Replaced By: 1 - Roller Group (DF) 288-0935, 2 - End Cap 317-9079, 4 - Bolt 1D-4610, 4 -Washer 5P-8248.

30 For 963 with Metric Hardware Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-9080, 4 - Bolt 8T-0360, 4 - Washer8T-3282. For 963 with Inch Hardware Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-9079, 4 - Bolt 1D-4610, 4 -Washer 5P-8248.

476

963D, 963C, 963B, 963963C, 963B TRACK ROLLERSCURRENT DESIGN (END COLLARS, SYMMETRIC SEALS)2DS, 9BL, BBD(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERTall Flange Double (TFD) – (31) 231-3089 (32)


Roller Shell (SF) 1 120-5753 (34)

Roller Shell (TFD) 1 120-5804 (32)

Bushing Assembly 2 116-6698Bushing Assembly - Bearing (35) 1 8P-5197Shaft 1 116-6702 (36)

Collar 2 120-5785Retaining Ring 2 117-9748Ring (Lock) 2 5M-4443Seal - Duo-Cone Group 2 171-5882Toric Ring (35) 2 162-2166Seal - Bushing O-Ring 2 2H-3928Seal - Shaft O-Ring 2 5F-8000Stopper 1 7G-4332Plug 1 6Y-0473Mounting Hardware (37)

Bolt (3/4") (38) 4 1D-4608Bolt (20 mm) (38) 4 6V-5845Washer (3/4") 4 5H-1504Washer (20 mm) 4 8T-3282

31 Optional DF roller for guiding; use quantity required for specific roller frame type.32 For 963 with Metric Hardware Serviced Replaced By: 1 - Roller Group (DF) 288-0936, 2 - End Cap 317-9080, 4 - Bolt 8T-0360, 4 - Washer

8T-3282. For 963 with Inch Hardware Serviced Replaced By: 1 - Roller Group (DF) 288-0936, 2 - End Cap 317-9079, 4 - Bolt 1D-4610, 4 -Washer 5P-8248.

33 For 963 with Metric Hardware Serviced Replaced By: 1 - Roller Group (DF) 288-0935, 2 - End Cap 317-9080, 4 - Bolt 8T-0360, 4 - Washer8T-3282. For 963 with Inch Hardware Serviced Replaced By: 1 - Roller Group (DF) 288-0935, 2 - End Cap 317-9079, 4 - Bolt 1D-4610, 4 -Washer 5P-8248.


35 Components of proceeding assembly or group; quantity shown is quantity per assembly or group.36 For 963 with Metric Hardware Serviced Replaced By: 1 - Roller Group (DF) 288-0935 or 1 - Roller Group (SF) 288-0934, and 2 - End Cap

317-9080, 4 - Bolt 8T-0360, 4 - Washer 8T-3282. For 963 with Inch Hardware Serviced Replaced By: 1 - Roller Group (DF) 288-0935, or 1 -Roller Group (SF) 288-0934, 2 - End Cap 317-9079, 4 - Bolt 1D-4610, 4 - Washer 5P-8248.

37 These components are not included in the roller group; quantities shown are required to mount each roller.38 963 machine effectivity for 20 mm metric mounting bolts (21Z3442 – UP, 9BL1– UP). All other 963 serial numbers (06Z, 11Z, 18Z, 48Z, and

29S) required 3/4" English mounting bolts.

477

963D, 963C, 963B, 963963B, 963 TRACK ROLLERSFORMER DESIGN (BOLT-ON RETAINER)

18Z1352-UP excluding 1354, 1359, 1363; 21Z319-UP; 9BL



Components of GroupRoller Shell (DF) 1 7T-4106 (39)

Roller Shell (SF) 1 7T-4101 (40)

Bearing (41) 2 9P-2245Shaft 1 6T-0720 (42)

Retainer Assembly 2 7T-4152Thrust Washer (43) 1 9W-2423Dowel (43) 4 2H-1190Bolt 12 0S-1594Washer 12 5M-2894Stabilizer Ring 2 7T-4031Seal – Duo-Cone Group 2 7T-0158Toric Ring (41) 1 6P-8912O-Ring (41) 1 6V-2701Seal – Retainer 2 5F-3144Stopper 1 7G-4332Plug 1 6Y-0473Mounting Hardware (44)

End Cap 2 6T-4861Bolt (45) 4 1D-4610Washer (45) 4 5P-8248Bolt (46) 4 8T-0360Washer (46) 4 8T-3282Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 7T-4722Toric Ring (41) 1 7T-1094

39 For 963 with Metric Hardware Serviced Replaced By: 1 - Roller Group (DF) 288-0935, 2 - End Cap 214-1109, 4 - Bolt 8T-0360, 4 - Washer8T-3282. For 963 with Inch Hardware Serviced Replaced By: 1 - Roller Group (DF) 288-0935, 2 - End Cap 288-0970, 4 - Bolt 1D-4610, 4 -Washer 5P-8248.


41 Component of preceding assembly or group; quantity shown is per assembly or group.42 For 963 with Metric Hardware Serviced Replaced By: 1 - Roller Group (DF) 288-0935 or 1 - Roller Group (SF) 288-0934, and 2 - End Cap

214-1109, 4 - Bolt 8T-0360, 4 - Washer 8T-3282. For 963 with Inch Hardware Serviced Replaced By: 1 - Roller Group (DF) 288-0935, or 1 -Roller Group (SF) 288-0934, 2 - End Cap 288-0970, 4 - Bolt 1D-4610, 4 - Washer 5P-8248.

43 These components used to repair retainer assembly. See instruction SEHS8915.44 These components are not included in the roller group; quantities shown are required to mount each roller.45 Inch hardware 3/4 inch – serial number 21Z-0319 – 3441.46 Metric hardware 20 mm – serial number 21Z- 3442 – UP.

478

963D, 963C, 963B, 963963B, 963 TRACK ROLLERSFORMER DESIGN (BOLT-ON RETAINER)18Z1352-UP excluding 1354, 1359, 1363; 21Z319-UP; 9BL(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERO-Ring (47) 1 8T-2272Seal – Retainer 2 4S-5898

963 TRACK ROLLERSEARLY DESIGN

11Z, 18Z1-1352, 21Z1-318, 29S, 48Z, 6Z



Components of GroupRoller Shell (DF) 1 9G-8032 (48)

Roller Shell (SF) 1 9G-8027 (49)



Bolt 12 2P-3201Ring (Lock) 2 5M-4443Seal – Duo-Cone Group 2 6Y-0925Toric Ring (50) 2 8H-2262Seal – Bushing O-Ring 2 2H-3928Seal – Shaft O-Ring 2 5F-8000Stopper 1 7G-4332Plug 1 6Y-0473Mounting Hardware (53)

Bolt 4 1D-4608Washer 4 5H-1504Special Application SealsSeal – Duo-Cone Group (Steel Mill) 2 4S-8984Toric Ring (50) 2 9M-9730

47 Component of preceding assembly or group; quantity shown is per assembly or group.48 For 963 with Inch Hardware Serviced Replaced By: 1 - Roller Group (DF) 288-0935, 2 - End Cap 288-0970, 4 - Bolt 1D-4610, 4 - Washer 5P-

8248.49 For 963 with Inch Hardware Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 288-0970, 4 - Bolt 1D-4610, 4 - Washer 5P-

8248.50 Component of preceding assembly or group; quantity shown is quantity per assembly or group.51 Replaces former 7G-0419 shaft, requires 2, 7G-0418 end collars. For 963 with Inch Hardware Serviced Replaced By: 1 - Roller Group (DF)

288-0935, or 1 - Roller Group (SF) 288-0934, 2 - End Cap 288-0970, 4 - Bolt 1D-4610, 4 - Washer 5P-8248.52 If 7G-0419 shaft is used, use (1) 7G-0418 and (1) 7G-0417 end collar.53 These components are not included in the roller group; quantities shown are required to mount each roller.

479

963D, 963C, 963B, 963963 TRACK ROLLERSEARLY DESIGN11Z, 18Z1-1352, 21Z1-318, 29S, 48Z, 6Z(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERSeal – Bushing O-Ring (Steel Mill) 2 8S-5654Seal - Shaft O-Ring (Steel Mill) 2 8M-4436

963D END GUIDING GUARDS (FRONT)USE WITH SystemOne

(PER MACHINE) QUANTITY PART NUMBERFront (Guard Assembly)Right Outer, Left Inner 2 253-0547Left Outer, Right Inner 2 253-0548

963C/B END GUIDING GUARDS (FRONT)LUBRICATED SWING LINK, METRIC HARDWARESystemOne, Hybrid, Sealed and Lubricated Track

(PER MACHINE) QUANTITY PART NUMBERFront (Guard Assembly)Right Outer, Left Inner 2 8Y-6672Left Outer, Right Inner 2 8Y-6671Wear Strip 4 231-4011Bolt 4 7X-2553Bolt 8 8T-4779Washer 12 8T-4122Bearing (Per Guard Assembly) 2 3W-8398

963 END GUIDING GUARDSLUBRICATED SWING LINK, INCH HARDWARE

(PER MACHINE) QUANTITY PART NUMBERFront (Guard Assembly)Right Outer, Left Inner 2 3W-8399Left Outer, Right Inner 2 3W-8396Wear Strip 4 7P-6570Bolt 12 0S-1589

963 END GUIDING GUARDSEARLY MODEL, NON-LUBRICATED SWING LINK, INCH HARDWARE

(PER MACHINE) QUANTITY PART NUMBERFront (Guard Assembly)Right Outer, Left Inner 2 7P-6594

480

963D, 963C, 963B, 963963 END GUIDING GUARDSEARLY MODEL, NON-LUBRICATED SWING LINK, INCH HARDWARE(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERLeft Outer, Right Inner 2 7P-6595Wear Strip 4 7P-6570Bolt 12 0S-1589Rear (Guard Assembly)Right Outer, Left Inner 2 3W-7778Left Outer, Right Inner 2 3W-7779Wear Strip 4 8G-7575Bolt 16 0S-1566Washer 16 5P-8247

963D END GUIDING GUARDS (REAR SPROCKET)USE WITH SystemOne

(PER MACHINE) QUANTITY PART NUMBERRear Guard – Right Outer, Left Inner 2 253-0544Rear Guard – Left Outer, Right Inner 2 253-0543Bolt (M20) (Rear Guard to Frame) 12 8C-8478Bolt (M20) (Rear Guard to Frame) 4 7X-2563Washer 16 8T-4123Tube 2 7P-4695Rod 2 3W-8134Nut 4 8T-4132Washer 4 8T-4122Guard Assembly (Outer Right) 1 254-5240

Guard Assembly (Outer Left) 1 254-5241Guard Assembly (Inner Right) 1 254-5242

Guard Assembly (Inner Left) 1 254-5243Plate (Inner Right) 1 139-9015

Plate (Inner Left) 1 139-9016Bolt (M12) (Guard As. & Plate to Frame) 24 8T-4192Washer 24 8T-4223Bolt (M16) (Guard As. to Rear Guard) 8 8T-4193Washer 8 7X-0515

963C/B END GUIDING GUARDS (REAR SPROCKET)SystemOne, Hybrid, Sealed and Lubricated Track

(PER MACHINE) QUANTITY PART NUMBERRear Guard – Right Outer, Left Inner 2 8Y-6629Rear Guard – Left Outer, Right Inner 2 8Y-6630Bolt (Rear Guard Mtg.) 4 8T-6381

481

963D, 963C, 963B, 963963C/B END GUIDING GUARDS (REAR SPROCKET)SystemOne, Hybrid, Sealed and Lubricated Track(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERBolt (Rear Guard Mtg.) 8 8C-8478Washer 12 8T-4123Tube 2 7P-4695Rod 2 3W-8134Nut 4 8T-4132Washer 4 8T-4122Wear Strip 4 231-4010Bolt 16 8T-4779Bolt 4 7X-2553Washer 16 8T-4122Guard Assembly (Outer Left) 1 3W-8123Guard Assembly (Outer Right) 1 3W-8120Guard Assembly (Inner Left) 1 139-9020

Plate (Inner Left) 1 139-9016Guard Assembly (Inner Right) 1 139-9019

Plate (Inner Right) 1 139-9015Bolt 24 8T-4192Washer 24 8T-4223Bolt (Large) 4 7X-2563Bolt (Small) 4 8T-4175Washer (Small) 4 7X-0515Washer (Large) 4 8T-5439

963D TRACK ROLLER GUARDS (FULL LENGTH)USE WITH SystemOne

(PER MACHINE) QUANTITY PART NUMBERGuard AssemblyRight Outer, Left Inner 2 253-3667Left Outer, Right Inner 2 253-3668Bolt (M20) 24 7X-2563Washer 24 8T-4123Spacer 24 8Y-1779Tube 12 7P-4695Rod 12 8Y-1944Nut 24 8T-4132Washer 24 8T-4122Plate (Front) 4 3W-8495Plate (Rear) 4 8Y-6625Bolt (M16) 24 7X-2553Washer 24 8T-4122

482

963D, 963C, 963B, 963963C/B TRACK ROLLER GUARDS (FULL LENGTH)

METRIC HARDWARE(PER MACHINE) QUANTITY PART NUMBERGuard AssemblyRight Outer, Left Inner 2 3W-8489Left Outer, Right Inner 2 3W-8492Bolt 24 7X-2563Washer 24 8T-4123Spacer 24 8Y-1779Tube 10 7P-4695Rod 10 8Y-1944Nut 20 8T-4132Washer 20 8T-4122Plate (Front) 4 3W-8495Plate (Rear) 4 8Y-6625Bolt 12 7X-2553Bolt 12 8T-4193Washer 24 8T-4122Plate (Front Guide) 4 3W-8140

963 TRACK ROLLER GUARDS (FULL LENGTH)INCH HARDWARE

(PER MACHINE) QUANTITY PART NUMBERGuard AssemblyRight Outer, Left Inner 2 7P-7430Left Outer, Right Inner 2 7P-7431Bolt 20 8T-8924Washer 20 8T-4994Spacer 20 1K-3478Tube 10 7P-4695Rod 10 7P-4699Nut 20 7X-0448Washer 20 8T-4122Plate (Front) 2 8G-7150Plate (Front) 2 8G-7149Plate (Rear) 4 8G-7576Bolt 8 7X-0343Bolt 8 7X-0347Bolt 4 7X-0344Bolt 4 7X-0346Washer 24 8T-4122Plate (Front Guide) 4 8G-7148

483

963D, 963C, 963B, 963963D IDLER GUARDSCONVENTIONAL IDLERSUSE WITH SystemOne

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 8Y-1900Bolt (M12) 4 8T-4176Bolt (M12) 4 8T-4194Washer 8 5P-1076Guard Assembly 2 3W-8772Guard Assembly 2 3W-8775Bar 2 8Y-1778Bolt (M12) 4 8T-4956Bolt (M12) 16 8T-4192Washer 20 5P-1076

484

973D, 973C, 973973D, 973C, 973 TRACK

HYBRID TRACK LARGE O.D. BUSHING26Z, 3RZ, 32Z, 66G, 86G, 90L, 91L, BCP, LDX, LCP

8.50" (215.9 mm) PITCH – 7/8" BOLTQUANTITY SALT PART NUMBER

Link Assembly – 40 Section 2 291-1612Track LinksRH Pin End Master 1 255-4791LH Pin End Master 1 255-4792RH Bushing End Master 1 255-4793LH Bushing End Master 1 255-4794RH Regular 39 289-3083LH Regular 39 289-3084Other ComponentsPin 40 199-2794Bushing 40 237-3790Seal Assembly (Rigid) 80 251-1659Thrust Ring 80 152-8073Stopper 40 7G-4332Plug 40 6Y-0473Track Hardware (1)

Bolt 156 7H-3599Nut 156 7T-9825Master Bolt 4 9W-9058Special Sets/GroupsBushing and Seal Group (40 Sections) 1 261-2353


973D, 973C, 973 MADE TO ORDER (MTO) TRACK GROUPSTRACK GROUPS NOT STOCKED AT DISTRIBUTION FACILITIES


973C, 973 TRACKLARGE O.D. BUSHING

26Z, 3RZ, 32Z, 66G, 86G, 90L, 91L8.50" (215.9 mm) PITCH – 7/8" BOLT

QUANTITY SALT PART NUMBERLink Assembly – 40 Section 2 6Y-2592 (2)

Track Links

1 Not part of link assembly; required to assemble track group.2 Service replaced by (1) 291-1612 Hybrid link assembly, and (5) 197-9679 Tough Steel Segments

485

973D, 973C, 973973C, 973 TRACKLARGE O.D. BUSHING26Z, 3RZ, 32Z, 66G, 86G, 90L, 91L8.50" (215.9 mm) PITCH – 7/8" BOLT(Cont'd.)

QUANTITY SALT PART NUMBERRH Pin End Master 1 9W-9059LH Pin End Master 1 9W-9060RH Bushing End Master 1 9W-9061LH Bushing End Master 1 9W-9062RH Regular 39 6Y-2593LH Regular 39 6Y-2594Other ComponentsPin 40 3P-0622Bushing 40 8E-5258 (3)


Bolt 156 7H-3599Nut 156 7T-9825Master Bolt 4 9W-9058Special Sets/GroupsBushing and Seal Group (38 Sections) 1 6I-8060Seal Set (84 Seal Assemblies) 1 252-7858

973 TRACKHYBRID LARGE O.D. BUSHING26Z, 32Z, 66G, 86G, 90L, 91L

8.50" (215.9 mm) PITCH - 3/4" BOLT REGULAR SHOE, 7/8" BOLT MASTER SHOE

QUANTITY SALT PART NUMBERLink Assembly – 40 Section 2 236-8179 (5)

Track LinksRH Pin End Master 1 255-4791LH Pin End Master 1 255-4792RH Bushing End Master 1 255-4793LH Bushing End Master 1 255-4794RH Regular 39 233-0385LH Regular 39 233-0386Other ComponentsPin 40 199-2794

3 If small O.D. bushing required, use part number 3P-0621.4 Not part of link assembly; required to assemble track group.5 To be used with (5) 197-9679 sprocket segments. Refer to Special Instruction Form REHS1746 for master shoe rework.

486

973D, 973C, 973973 TRACKHYBRID LARGE O.D. BUSHING26Z, 32Z, 66G, 86G, 90L, 91L8.50" (215.9 mm) PITCH - 3/4" BOLT REGULAR SHOE, 7/8" BOLT MASTER SHOE(Cont'd.)

QUANTITY SALT PART NUMBERBushing 40 237-3790Seal Assembly (Rigid) 80 251-1659Thrust Ring 80 152-8073Stopper 40 7G-4332Plug 40 6Y-0473Track Hardware (6)

Bolt (3/4") 156 7H-3598Nut 156 1S-1860Master Bolt (7/8") 4 9W-9058Special Sets/GroupsBushing and Seal Group (40 Sections) 1 261-2353


973 TRACKLARGE O.D. BUSHING

26Z, 32Z, 66G, 86G, 90L, 91L8.50" (215.9 mm) PITCH – 3/4" BOLT

QUANTITY SALT PART NUMBERLink Assembly – 40 Section 2 – (7)

Track LinksRH Pin End Master 1 7T-4659LH Pin End Master 1 7T-4660RH Bushing End Master 1 7T-4661LH Bushing End Master 1 7T-4662RH Regular 39 7T-4657LH Regular 39 7T-4658Other ComponentsPin 40 3P-0622Bushing 40 8E-5258 (8)


Bolt 156 7H-3598

6 Not part of link assembly; required to assemble track group.7 Canceled replaced by (1) 236-8179 hybrid link assembly and (5) 197-9679 sprocket segments. Refer to Special Instruction Form REHS1746

for master shoe rework.8 If small O.D. bushing required, use part number 3P-0621.

487

973D, 973C, 973973 TRACKLARGE O.D. BUSHING26Z, 32Z, 66G, 86G, 90L, 91L8.50" (215.9 mm) PITCH – 3/4" BOLT(Cont'd.)

QUANTITY SALT PART NUMBERNut 156 1S-1860Master Bolt 4 2P-9670Special Sets/GroupsBushing and Seal Group (38 Sections) 1 6I-8060Seal Set (84 Seal Assemblies) 1 252-7858

973C ROTATING BUSHING TRACK8.50" (215.9 mm) PITCH - 7/8" BOLT

QUANTITY PART NUMBERLink Assembly – 40 Section 2 152-8054Track LinksRH Pin End Master 1 6I-9241LH Pin End Master 1 6I-9242RH Bushing End Master (9) 1 165-1760LH Bushing End Master (9) 1 165-1761RH Regular (9) 39 165-1758LH Regular (9) 39 165-1759Other ComponentsPin 40 152-8080Bushing 40 165-1770Seal Assembly (Rigid) 160 222-6998 (10)

Thrust Ring 160 152-8073Stopper 40 7G-4332Plug 40 6Y-0473Track Hardware (11)

Bolt 156 7H-3599Nut 156 2S-2140Master Bolt 2 6V-1723Master Bolt 2 9W-9058

9 Joint Assemblies ( include link and insert). Insert not serviced10 Serviced Replaced By: 239-7943.11 Not part of link assembly; required to assemble track group.

488

973D, 973C, 973973D, 973C, 973 TRACK

HYBRID STEEL MILL8.50" (215.9 mm) PITCH - 7/8" BOLT

QUANTITY SEALED PART NUMBERLink Assembly – 40 Section 2 291-1614 (12)

Track LinksRH Regular 40 289-3083LH Regular 40 289-3084Other ComponentsPin 39 8E-4272Master Pin 1 8E-4273Bushing 39 247-1475Master Bushing 1 247-1476Seal (Spring Washer) 160 8M-6239Spacer 2 8M-6238Track Hardware (13)

Bolt 160 7H-3599Nut 160 7T-9825

973C, 973 TRACKSTEEL MILL

8.50" (215.9 mm) PITCH – 7/8" BOLT

QUANTITY SEALED PART NUMBERLink Assembly – 40 Section 2 6Y-5905 (14)

Track LinksRH Regular 40 6Y-2593LH Regular 40 6Y-2594Other ComponentsPin 39 8E-4272Master Pin 1 8E-4273Bushing 39 1M-3669Master Bushing 1 1M-3670Seal (Spring Washer) 160 8M-6239Spacer 2 8M-6238Track Hardware (13)

Bolt 160 7H-3599Nut 160 7T-9825Special Sets/GroupsPin and Bushing Group (38 Sections) 1 6P-4236

12 To be used with (5) 197-9679 sprocket segments.13 Not part of link assembly; required to assemble track group14 Serviced replaced by (1) 291-1614 link assembly and (5) 197-9679 sprocket segments.

489

973D, 973C, 973973C, 973 TRACK

STEEL MILL8.50" (215.9 mm) PITCH – 3/4" BOLT

QUANTITY SEALED PART NUMBERLink Assembly – 40 Section 2 – (15)

Track LinksRH Regular 40 8S-2589LH Regular 40 8S-2590Other ComponentsPin 40 8E-4272Bushing 40 1M-3669Seal (Spring Washer) 160 8M-6239Spacer 2 8M-6238Track Hardware (16)

Bolt 160 7H-3598Nut 160 1S-1860Special Sets/GroupsPin and Bushing Group (38 Sections) 1 6P-4236

973C, 973 TRACK SHOES8.50" (215.9 mm) PITCH – 7/8" BOLT



Single Grouser - Extreme Service 20.0" (510 mm) 317-9450 317-9451Single Grouser - Extreme Service(Trapezoidal Opening)

20.0" (510 mm) 321-7448 321-7449

Single Grouser - Extreme Service 22.0" (560 mm) 317-9444 317-9445Single Grouser - Extreme Service (LGP) 26.5" (675 mm) 331-3629 331-3630Single Grouser - Extreme Service (LGP)(Trapezoidal Opening) (17)

26.5" (675 mm) 321-7454 321-7455

Single Grouser - Moderate Service(Trapezoidal Opening)

20.0" (510 mm) 1Q-4965 1Q-4964

Double Grouser 19.7" (500 mm) 8E-4416 8E-4417Double Grouser (Trapezoidal Opening) 19.7" (500 mm) 128-7743 128-7744Double Grouser (LGP) 24.0" (610 mm) 8E-4427 1Q-4669Double Grouser (LGP) 26.5" (675 mm) 8E-4418 8E-4419Chopper (Trapezoidal Opening) 20.0" (510 mm) 8E-8323 8E-8324Flat 19.7" (500 mm) 6Y-5906 –

Triple Grouser 19.7" (500 mm) 1Q-4604 8E-4417 (18)

15 Order 38 Section 246-5808 Link assembly, remove split masters and add 3 sections.16 Not part of link assembly; required to assemble track group17 Refer to REHS 3373 for instruction about adding holes to hub.18 Double Grouser Shoe

490

973D, 973C, 973973C, 973 TRACK SHOESROTATING BUSHING TRACK

8.50" (215.9 mm) PITCH – 7/8" BOLT

TYPE WIDTH PART NUMBERExtreme Service (Trapezoidal Opening) 22.0" (560 mm) 9Z-9261 (19)

Extreme Service 24.0" (610 mm) 7T-5969Extreme Service (Trapezoidal Opening) 24.0" (610 mm) 9Z-9263Double Grouser 20.0" (510 mm) 170-3823Double Grouser 27.0" (675 mm) 170-3827

973 HYBRID TRACK SHOESUSE WITH TRACK LINKS 233-0385, 233-0386

8.50" (215.9 mm) PITCH 3/4" BOLT REGULAR SHOE, 7/8" BOLT MASTER SHOE



Single Grouser - Extreme Service 22.0" (560 mm) 188-5603 376-1261Double Grouser 18.0" (460 mm) 8E-4434 263-9760Double Grouser (Trapezoidal Opening) 18.0" (460 mm) 8E-4436 263-9761Double Grouser (LGP, Trapezoidal Opening) 22.0" (560 mm) 8E-4432 263-9759Chopper (Trapezoidal Opening) 19.7" (500 mm) 8E-8325 8E-8324




Single Grouser - Extreme Service 22” 22.0" (560 mm) 188-5603 188-5604Single Grouser - Moderate Service 20” 20.0" (510 mm) 188-5333 188-5601Single Grouser - Moderate Service 20” 20.0" (510 mm) 188-5333 188-5601Double Grouser 18.0" (460 mm) 8E-4434 8E-4435Double Grouser (Trapezoidal Opening) (20) 18.0" (460 mm) 8E-4436 8E-4437Double Grouser (LGP, Trapezoidal Opening) (21) 22.0" (560 mm) 8E-4432 8E-4433Chopper (Trapezoidal Opening) 19.7" (500 mm) 8E-8325 8E-8326Steel Mill Flat 19.7" (500 mm) 6T-0729 –

973D, 973C, 973 SPROCKETS8.50" (215.9 mm) PITCH

(PER SIDE) QUANTITY PART NUMBERSprocket Segment (5 Tooth) (Tough Steel) 5 197-9679Bolt 20 282-3655Nut 20 7H-3608

19 Service replaced by 330-7667.20 Replaces former 20" (510 mm) 3P-7384/68 shoes; refer to IRM UC93-14 for details.21 Replaces former 27" (685 mm) 7P-4009/3908 shoes; refer to IRM UC93-14 for details.

491

973D, 973C, 973973D IDLER

QUANTITY PART NUMBERIdler Group 2 291-9931Idler Assembly 1 115-0605Other ComponentsBushing Assembly 2 291-9325Bearing (22) 1 8P-6651Shaft 1 291-9277Seal – Duo-Cone Group 2 162-7863Toric Ring (22) 2 162-2167O-Ring (22) 2 107-4057Seal – Collar 2 261-9673Seal 2 4H-9105Bolt 12 8T-9101Washer 12 8T-4896Stopper 1 7G-4332Pin 2 9B-2289Retainer 2 291-9312Plug 1 6Y-0473

973D IDLERSTEEL MILL

QUANTITY PART NUMBERIdler Group - Steel Mill 2 309-1281Idler Assembly 1 115-0605Other ComponentsBushing Assembly 2 291-9325Bearing (22) 1 8P-6651Shaft 1 352-9306Seal – Duo-Cone Group 2 9W-8878Toric Ring (22) 2 107-4888O-Ring (22) 2 107-4057Seal – Collar 2 261-9673Seal 2 4H-9105Bolt 12 8T-9101Washer 12 8T-4896Plug 1 6V-0387Pin 2 9B-2289Retainer 2 291-9312


492

973D, 973C, 973973C, 973 IDLERS

(PER MACHINE) QUANTITY PART NUMBERIdler Assembly 2 377-2989Other ComponentsBushing Assembly 2 3P-8432Bearing (23) 1 8P-6651Shaft 1 8E-9562Seal – Duo-Cone Group 2 9W-1060Toric Ring (23) 1 8H-2262O-Ring (23) 1 9W-1058Seal – Bushing O-Ring 2 4H-9105Bolt 12 9B-7237Washer 12 8T-4896Stopper 1 7G-4332Plug 1 6Y-0473Lock 2 5M-5000Bolt 2 7X-0310Washer 2 7X-0563Swing Link 1 8Y-5859Swing Link 1 8Y-5861Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 9W-1059Toric Ring (23) 1 9M-9730O-Ring (23) 1 9W-1057Seal – Bushing O-Ring 2 9M-9729Stopper 1 3T-3800Plug 1 3T-3799

973D CARRIER ROLLERQUANTITY PART NUMBER

Carrier Roller Group 4 235-5974

973C, 973 CARRIER ROLLERS(PER MACHINE) QUANTITY PART NUMBERGroup 4 428-0056

Special Application GroupsGroup (Steel Mill) 4 2P-3514Seal – Duo-Cone Group (Steel Mill) 1 4S-8984Toric Ring (24) 1 9M-9730

23 Component of preceding assembly or group; quantity shown is quantity per assembly or group.24 Component of preceding group; quantity shown is the quantity per group.

493

973D, 973C, 973973C, 973 CARRIER ROLLERS (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERSeal–Cover (Steel Mill) 1 2P-3538Seal–Shaft (Steel Mill) 1 1S-2174Group (Arctic) 4 255-8882

Seal – Duo-Cone Group (Arctic) 1 171-5882Toric Ring 2 162-2166

973C, 973 TRACK ROLLERSCURRENT METRIC MOUNTING HARDWARE, END COLLARS

3RZ, 86G1087-UP




Roller Shell (SF) 1 124-8251 (26)

Bushing Assembly 2 124-8267Bearing (27) 1 8P-6651Shaft 1 118-1628Ring (Retaining-Snap) 2 121-1258Ring (Lock) 2 6H-2953End Collar 2 134-6638Seal – Duo-Cone Group 2 171-5882Toric Ring (27) 2 162-2166Seal - Bushing O-Ring 2 4H-9105Seal - Shaft O-Ring 2 8F-6711Stopper 1 7G-4332Plug 1 6Y-0473Mounting Hardware (28)

Bolt (24 mm) 4 6V-8133Washer (24 mm) 4 6V-8237Special Application Roller GroupsDouble Flange (DF) (Steel Mill) 8 129-5030 (29)

Single Flange (SF) (Steel Mill) 6 129-5029 (30)

Seal – Duo-Cone Group (Steel Mill) 2 4S-8984Toric Ring (27) 2 9M-9730

25 Serviced Replaced By: 1 - Roller Group (DF) 323-5928, 2 - End Cap 222-7244, 4 - Bolt 8T-0666, 4 - Washer 6V-8237.26 Serviced Replaced By: 1 - Roller Group (SF) 323-5925, 2 - End Cap 222-7244, 4 - Bolt 8T-0666, 4 - Washer 6V-8237.27 Component of preceding assembly or group; quantity shown is per assembly or group.28 These components are not included in the roller group; quantities shown are required to mount each roller.29 Serviced Replaced By: 1 - Roller Group (DF) 348-4367, 2 - End Cap 222-7244, 4 - Bolt 8T-0667, 4 - Washer 6V-8237.30 Serviced Replaced By: 1 - Roller Group (SF) 348-4834, 2 - End Cap 222-7244, 4 - Bolt 8T-0667, 4 - Washer 6V-8237.

494

973D, 973C, 973973C, 973 TRACK ROLLERSCURRENT METRIC MOUNTING HARDWARE, END COLLARS3RZ, 86G1087-UP(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERSeal – Bushing O-Ring (Steel Mill) 2 9M-9729Seal – Shaft O-Ring (Steel Mill) 2 8M-4390Stopper (Steel Mill) 1 3T-3800Plug (Steel Mill) 1 3T-3799

973 TRACK ROLLERSFORMER INCH MOUNTING HARDWARE, END COLLARS

26Z, 32Z, 66G, 86G1-1086, 90L, 91L



Tall Flange Double (TFD) – (33) 231-3092 (34)


Roller Shell (SF) 1 124-8251 (32)

Roller Shell (TFD) 1 124-8259 (34)

Bushing Assembly 2 124-8267Bearing (35) 1 8P-6651Shaft 1 118-1628Ring (Retaining-Snap) 2 121-1258Ring (Lock) 2 6H-2953End Collar 2 124-8262Seal – Duo-Cone Group 2 171-5882Toric Ring (35) 2 161-2166Seal - Bushing O-Ring 2 4H-9105Seal - Shaft O-Ring 2 8F-6711Stopper 1 7G-4332Plug 1 6Y-0473Mounting Hardware (36)

Bolt (7/8") 4 1D-4629Washer (7/8") 4 9H-1031Special Application SealsSeal – Duo-Cone Group (Steel Mill) 2 4S-8984

31 Serviced Replaced By: 1 - Roller Group (DF) 323-5928, 2 - End Cap 273-3996, 4 - Bolt 1D-4630, 4 - Washer 9H-1031.32 Serviced Replaced By: 1 - Roller Group (SF) 323-5925, 2 - End Cap 273-3996, 4 - Bolt 1D-4630, 4 - Washer 9H-1031.33 Optional DF roller for guiding; use quantity required for specific roller frame type.34 Serviced Replaced By: 1 - Roller Group (DF) 323-5931, 2 - End Cap 273-3996, 4 - Bolt 1D-4630, 4 - Washer 9H-1031.35 Component of preceding assembly or group; quantity shown is per assembly or group.36 These components are not included in the roller group; quantities shown are required to mount each roller.

495

973D, 973C, 973973 TRACK ROLLERSFORMER INCH MOUNTING HARDWARE, END COLLARS26Z, 32Z, 66G, 86G1-1086, 90L, 91L(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERToric Ring (37) 2 9M-9730Seal – Bushing O-Ring (Steel Mill) 2 9M-9729Seal – Shaft O-Ring (Steel Mill) 2 8M-4390Stopper (Steel Mill) 1 3T-3800Plug (Steel Mill) 1 3T-3799

973 TRACK ROLLERSFORMER BOLT-ON RETAINER

90L, 91L, 86G223-UP, 66G788-UP, (Inc. 66G786)

(PER MACHINE) QUANTITY PART NUMBERDouble Flange (DF) 8 – (38)

Single Flange (SF) 6 – (39)



Bearing (37) 2 9W-9498Shaft 1 3T-7392Retainer 2 9W-6632Thrust Washer (40) 1 8E-7510Stabilizer Ring 2 6T-4871Bolt 12 0S-1595Washer 12 5P-8245Seal – Duo-Cone Group 2 7T-0158Toric Ring (37) 1 6P-8912O-Ring (37) 1 6V-2701Seal – Retainer 2 5F-3106Stopper 1 7G-4332Plug 1 6Y-0473Mounting Hardware (41)

End Cap (7/8") 2 6T-5114Bolt (7/8") 4 2H-3856Washer (7/8") 4 4M-6953End Cap (24 mm) 2 6Y-6116

37 Component of preceding assembly or group; quantity shown is per assembly or group.38 Serviced Replaced By: 1 - Roller Group (DF) 323-5928, 2 - End Cap 273-3996, 4 - Bolt 1D-4630, 4 - Washer 9H-1031.39 Serviced Replaced By: 1 - Roller Group (SF) 323-5925, 2 - End Cap 273-3996, 4 - Bolt 1D-4630, 4 - Washer 9H-1031.40 Use (1) 9G-9341 Thrust Washer and (4) 2H-1190 Dowels to repair former 9W-6633 Retainer Assembly. Do not drill and dowel new 8E-7510

Thrust Washer. See Special Instruction SEHS8515.41 These components are not included in the roller group; quantities shown are required to mount each roller.

496

973D, 973C, 973973 TRACK ROLLERSFORMER BOLT-ON RETAINER90L, 91L, 86G223-UP, 66G788-UP, (Inc. 66G786)(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERBolt (24 mm) 4 8T-0667Washer (24 mm) 4 6V-8237Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 7T-4722Toric Ring (42) 1 7T-1094O-Ring (42) 1 8T-2272Retainer 2 4S-5898Stopper 1 3T-3800Plug 1 3T-3799

973 TRACK ROLLERSEARLY INCH MOUNTING HARDWARE

26Z, 32Z, 86G1-222, 66G1-787 (Exc. 66G786)



Components of GroupRoller Shell (DF) 1 8S-2931Roller Shell (SF) 1 4S-9049Bushing Assembly 2 1P-8787Bearing (42) 1 8P-6651Shaft 1 118-1628 (45)


Bolt 12 2P-3201Ring 2 6H-2953Seal – Duo-Cone Group 2 6Y-0925Toric Ring (42) 2 8H-2262Seal – Bushing O-Ring 2 4H-9105Seal – Shaft O-Ring 2 8F-6711Stopper 1 7G-4332Plug 1 6Y-0473Mounting Hardware (47)

Bolt 4 1D-4629

42 Component of preceding assembly or group; quantity shown is per assembly or group.43 Serviced Replaced By: 1 - Roller Group (DF) 323-5928, 2 - End Cap 273-3996, 4 - Bolt 1D-4630, 4 - Washer 9H-1031.44 Serviced Replaced By: 1 - Roller Group (SF) 323-5925, 2 - End Cap 273-3996, 4 - Bolt 1D-4630, 4 - Washer 9H-1031.45 Replaces former 9S-0313 shaft; requires 2 – 9S-0312 end collars.46 If 9S-0313 shaft is used, use 1 – 9S-0312 and 1 – 9S-0311 end collar.47 These components are not included in the roller group; quantities shown are required to mount each roller.

497

973D, 973C, 973973 TRACK ROLLERSEARLY INCH MOUNTING HARDWARE26Z, 32Z, 86G1-222, 66G1-787 (Exc. 66G786)(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERWasher 4 9H-1031Special Application Roller GroupsDouble Flange (DF) (Steel Mill) 8 118-1631 (48)

Single Flange (SF) (Steel Mill) 6 118-1630 (49)

Seal – Duo-Cone Group (Steel Mill) 2 4S-8984Toric Ring (50) 2 9M-9730Bushing O-Ring (Steel Mill) 2 9M-9729Shaft O-Ring (Steel Mill) 2 8M-4390Stopper (Steel Mill) 1 3T-3800Plug (Steel Mill) 1 3T-3799

973C, 973 END GUIDING GUARDSCURRENT MODEL, LUBRICATED SWING LINK, METRIC HARDWARE

(PER MACHINE) QUANTITY PART NUMBERFront (Guard Assembly)Right Outer, Left Inner 2 249-5500Left Outer, Right Inner 2 249-5501Wear Strip 4 8Y-1732Bolt 16 7X-2562Washer 16 8T-4123Bearing (Per Guard Assembly) 2 3W-8240

973C, 973 TRACK GUIDING GUARDS (REAR SPROCKET)(PER MACHINE) QUANTITY PART NUMBERRear Guard – Right Outer, Left Inner 2 8Y-6627Rear Guard – Left Outer, Right Inner 2 8Y-6628Bolt 16 8T-4649Washer 16 8T-4167Spacer 2 7P-5952Rod 2 3W-8344Nut 4 8T-4131Washer 4 8T-4123Plate (Wear) 4 3W-8339Bolt 16 8T-5460Washer 16 8T-4123

48 Serviced Replaced By: 1 - Roller Group (DF) 348-4367, 2 - End Cap 273-3996, 4 - Bolt 1D-4630, 4 - Washer 9H-1031.49 Serviced Replaced By: 1 - Roller Group (SF) 347-4834, 2 - End Cap 273-3996, 4 - Bolt 1D-4630, 4 - Washer 9H-1031.50 Component of preceding assembly or group; quantity shown is per assembly or group.

498

973D, 973C, 973973C, 973 TRACK GUIDING GUARDS (REAR SPROCKET) (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERGuard Assembly (RH Outer) 1 8Y-1728Guard Assembly (RH Inner) 1 8Y-1730Guard Assembly (LH Outer) 1 8Y-1729Guard Assembly (LH Inner) 1 8Y-1731Bolt 24 8T-4956Washer 24 5P-1076Bolt 4 7X-2562Bolt 4 7X-2564Washer 8 8T-4123

973C/B END GUIDING GUARDSUSE WITH ROTATING BUSHING TRACK

(PER MACHINE) QUANTITY PART NUMBERFront (Guard Assembly)Right Outer, Left Inner 2 249-5507Left Outer, Right Inner 2 249-5509Wear Strip 4 192-2550Bolt 8 7X-2562Bolt 8 8T-5460Washer 16 8T-4123Bearing (Per Guard Assembly) 2 3W-8240

973C/B TRACK GUIDING GUARDS (REAR SPROCKET)USE WITH ROTATING BUSHING TRACK

(PER MACHINE) QUANTITY PART NUMBERRear Guard – Right Outer, Left Inner 2 191-2028Rear Guard – Left Outer, Right Inner 2 191-2029Bolt 16 8T-4649Washer 20 8T-4167Spacer 2 198-9059Rod 2 3W-8344Nut 4 8T-4131Washer 36 8T-4123Plate (Wear) 4 192-2549Bolt 8 8T-5460Guard Assembly (RH Outer) 1 218-0051Guard Assembly (RH Inner) 1 218-0049

Guard Assembly (LH Outer) 1 218-0050Guard Assembly (LH Inner) 1 218-0048Bolt 24 8T-4956Washer 24 5P-1076

499

973D, 973C, 973973C/B TRACK GUIDING GUARDS (REAR SPROCKET)USE WITH ROTATING BUSHING TRACK(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERBolt 4 7X-2576Bolt 16 8T-4141

973 END GUIDING GUARDS (FRONT)FORMER MODEL, LUBRICATED SWING LINK, INCH HARDWARE

(PER MACHINE) QUANTITY PART NUMBERFront (Guard Assembly)Right Outer, Left Inner 2 3W-8236Left Outer, Right Inner 2 3W-8244Wear Strip 4 8G-3351Bolt 12 7X-0380Bearing 4 3W-8240

973 END GUIDING GUARDS (REAR)FORMER MODEL, NARROW MOUNTING BOLT PATTERN, INCH HARDWARE

(PER MACHINE) QUANTITY PART NUMBERRear (Guard Assembly)Right Outer 1 3W-7675Left Outer 1 3W-7684Right Inner 1 3W-7691Left Inner 1 3W-7687Bolt 2 7X-0368Washer 2 8T-4994Bolt 16 7X-0385Washer 16 8C-6913Wear Strip 4 8G-8031Bolt 20 8T-9398Washer 20 8T-4994

973 END GUIDING GUARDS (FRONT)EARLY MODEL, NON-LUBRICATED SWING LINK, INCH HARDWARE

(PER MACHINE) QUANTITY PART NUMBERFront (Guard Assembly)Right Outer, Left Inner 2 7P-9246Left Outer, Right Inner 2 7P-9250Wear Strip 4 8G-6048Bolt 12 2H-3757Bearing 4 8G-0980

500

973D, 973C, 973973 END GUIDING GUARDS (REAR)EARLY MODEL, INCH HARDWARE (1ST PROD 1985)

(PER MACHINE) QUANTITY PART NUMBERRear (Guard Assembly)Right Outer 1 3W-7774Left Outer 1 3W-7772Right Inner 1 3W-7773Left Inner 1 3W-7771Bolt 4 1D-4609Washer 4 5P-8248Bolt 16 1D-4628Washer 16 5P-8249Wear Strip 4 8G-8031Bolt 20 1A-0458Washer 20 5P-8248

973C, 973 TRACK ROLLER GUARDSCURRENT MODEL, METRIC HARDWARE

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 3W-8546Guard Assembly 2 3W-8549Spacer 12 7P-5952Rod 12 8Y-1775Washer 24 8T-4123Nut 24 8T-4131Bolt 24 8T-5878Washer 24 8T-4167Boss 24 1K-7183Plate (Rear) 4 8Y-6625Plate (Front) 2 8Y-1773Plate (Front) 2 8Y-1774Bolt 4 8T-5460Bolt 8 8T-6430Bolt 12 7X-2563Plate (Guide) 4 8Y-1772Bolt 8 8T-6430Washer 32 8T-4123

973 TRACK ROLLER GUARDSFORMER MODEL, INCH HARDWARE

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 7P-5943Guard Assembly 2 7P-5948Spacer 12 7P-5952

501

973D, 973C, 973973 TRACK ROLLER GUARDSFORMER MODEL, INCH HARDWARE(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERRod 12 8G-2049Washer 24 8T-4994Nut 24 6V-8182Bolt 32 7X-0384Washer 32 8C-6913Boss 32 1K-7183Plate (Rear) 2 8G-8047Plate (Rear) 2 8G-8050Plate (Front) 2 8G-6045Plate (Front) 2 8G-6044Bolt 8 8T-9399Bolt 8 7X-0380Bolt 8 7X-0382Plate (Guide) 4 8G-6048Washer 24 8C-6913

502

977977 SEALED AND LUBRICATED HYBRID TRACK

11K5959-UP, 14X, 48J1281-UP, 70J2772-UP8.50" (215.9 mm) PITCH – 3/4" BOLT REGULAR SHOE, 7/8" BOLT MASTER SHOE


Track LinksRH Pin End Master 1 255-4791LH Pin End Master 1 255-4792RH Bushing End Master 1 255-4793LH Bushing End Master 1 255-4794RH Regular 38 233-0385LH Regular 38 233-0386Other ComponentsPin 39 199-2794Bushing 39 237-3790Seal Assembly (Rigid) 78 251-1659Thrust Ring 78 152-8073Stopper 39 7G-4332Plug 39 6Y-0473Track Hardware (2)

Bolt (3/4") 152 7H-3598Nut 152 1S-1860Master Bolt (7/8") 4 9W-9058Special Sets/GroupsBushing and Seal Group (40 Sections) 1 261-2353


977 SEALED AND LUBRICATED TRACK11K5959-UP, 14X, 48J1281-UP, 70J2772-UP8.50" (215.9 mm) PITCH – 3/4" BOLT


Track LinksRH Pin End Master 1 2P-9653LH Pin End Master 1 2P-9654RH Bushing End Master 1 2P-9655LH Bushing End Master 1 2P-9656RH Regular 38 8S-2589LH Regular 38 8S-2590Other Components

1 To be used with (5) 197-9679 sprocket segments. Refer to Special Instruction Form REHS1746 for master shoe rework.2 Not part of link assembly; required to assemble track group.3 Serviced replaced by (1) 239-6881 link assembly and (5) 197-9679 sprocket segments. Refer to Special Instruction Form REHS1746 for

master shoe rework.

503

977977 SEALED AND LUBRICATED TRACK11K5959-UP, 14X, 48J1281-UP, 70J2772-UP8.50" (215.9 mm) PITCH – 3/4" BOLT(Cont'd.)

QUANTITY PART NUMBERPin 39 3P-0622Bushing 39 3P-0621Seal Assembly (Rigid) 78 250-3998Thrust Ring 78 3P-0623Stopper 39 7G-4332Plug 39 6Y-0473Track Hardware (4)

Bolt 152 7H-3598Nut 152 1S-1860Master Bolt 4 2P-9670Special Sets/GroupsBushing and Seal Group (38 Sections) 1 6I-8060 (5)


977 SEALED TRACK11K5959-UP, 14X, 48J1281-UP, 70J2772-UP8.50" (215.9 mm) PITCH – 3/4" BOLT

(PER MACHINE) QUANTITY PART NUMBERLink Assembly – 39 Section (6) 2 – (7)

Track LinksRH Pin End Master 1 2P-9653LH Pin End Master 1 2P-9654RH Bushing End Master 1 2P-9655LH Bushing End Master 1 2P-9656RH Regular 38 8S-2589LH Regular 38 8S-2590Other ComponentsPin 39 8E-4272Bushing 39 1M-3669Seal (Sealed) 156 8M-6239Track Hardware (4)

Bolt 152 7H-3598Nut 152 1S-1860Master Bolt 4 2P-9670Special Sets/GroupsPin and Bushing Group (38 Sections) 1 6P-4236

4 Not part of link assembly; required to assemble track group.5 Contains Extended Wear Life Bushings (8E-5258).6 Steel Mill Applications7 Order 38 Section 246-5808 and add 1 section.

504

977977 EXTENDED WEAR LIFE TRACK*

LARGE O.D. BUSHING8.50" (215.9 mm) PITCH – 3/4" BOLT


Track LinksRH Pin End Master 1 7T-4659LH Pin End Master 1 7T-4660RH Bushing End Master 1 7T-4661LH Bushing End Master 1 7T-4662RH Regular 38 7T-4657LH Regular 38 7T-4658Other ComponentsPin 39 3P-0622Bushing 39 8E-5258 (9)


Bolt 152 7H-3598Nut 152 1S-1860Master Bolt 4 2P-9670Special Sets/GroupsBushing and Seal Group (38 Sections) 1 6I-8060Seal Set (84 Seal Assemblies) 1 252-7858

* NOTE: Extended wear life link assemblies require special rollers and idlers to match the high rail link; refer to roller and idler sections for details.

977 SEALED ONE PIECE MASTER LINK20A2509-UP, 53A, 46H, 48J1-1280, 70J1-2771, 11K1-5958

8.00" (203.2 mm) PITCH – 3/4" BOLT


Track LinksRH Regular 41 1S-1863LH Regular 41 1S-1864Other ComponentsPin 40 6B-5882Master Pin 1 8M-7288Bushing 40 8M-7289

8 Order 38 Section 239-6882 and add 1 section.9 If small O.D. Bushing required, use part number 3P-0621.10 Not part of the link assembly; required to assemble track group.11 If 40 section link assembly is required order 1S-6943 and remove one section.

505

977977 SEALED ONE PIECE MASTER LINK20A2509-UP, 53A, 46H, 48J1-1280, 70J1-2771, 11K1-59588.00" (203.2 mm) PITCH – 3/4" BOLT(Cont'd.)

QUANTITY PART NUMBERMaster Bushing 1 5M-2033Seal (Spring Washer) 164 8M-7231Spacer 2 8M-7290Track Hardware (12)

Bolt 164 1S-1859Nut 164 1S-1860Special GroupsPin and Bushing Group (36 Sections) 1 8P-5689

977 SEALED AND LUBRICATED TRACK20A1-2508

6.91" (175.5 mm) PITCH – 5/8" BOLT

QUANTITY PART NUMBERLink Assembly – 44 sections 2 – (13)

Track LinksRH Pin End Master 1 3P-3043LH Pin End Master 1 3P-3044RH Bushing End Master 1 3P-3045LH Bushing End Master 1 3P-3046RH Regular 43 3P-7153LH Regular 43 3P-7154Other ComponentsPin 44 160-7818 (14)

Bushing 44 7T-4636 (15)




12 Not part of link assembly; required to assemble track group13 Order 154-3676 link assembly and remove two sections.14 Former pin 3P-3880, replaced by, 1-160-7818 pin, 1-5G-2247 stopper, 1-6Y-0473 plug.15 Large O.D. bushings.16 Not part of the link assembly; required to assemble track group.

506

977977 SEALED TRACK

20A1-25086.91" (175.5 mm) PITCH – 5/8" BOLT

QUANTITY PART NUMBERLink Assembly – 44 sections 2 – (17)

Track LinksRH Pin End Master 1 3P-3043LH Pin End Master 1 3P-3044RH Bushing End Master 1 3P-3045LH Bushing End Master 1 3P-3046RH Regular 43 3P-7153LH Regular 43 3P-7154Other ComponentsPin 44 6B-5502Bushing 44 5S-0710Seal (Sealed) 176 5S-0709Track Hardware (18)


977 HYBRID TRACK SHOESUSE WITH TRACK LINKS 233-0385, 233-0386

8.50" (215.9 mm) PITCH 3/4" BOLT REGULAR SHOE, 7/8" BOLT MASTER SHOE



Double Grouser 18.0" (460 mm) 8E-4434 263-9760Double Grouser (Trapezoidal Opening) 18.0" (460 mm) 8E-4436 263-9761




Single Grouser - Moderate Service 18.0" (460 mm) 6P-3068 6P-3069Double Grouser 18.0" (460 mm) 8E-4434 8E-4435Double Grouser (Trapezoidal Opening) 18.0" (460 mm) 8E-4436 8E-4437Triple Grouser 18.0" (460 mm) 8S-4468 8E-4437 (19)

Steel Mill Flat 16.0" (405 mm) 7T-1312 7T-1313

17 Order 3P-5762 link assembly and remove two sections.18 Not part of the link assembly; required to assemble track group.19 Double grouser master. - Trim grouser to match triple grouser height.

507

977977 TRACK SHOES

8.00" (203.2 mm) PITCH – 3/4" BOLT

TYPE WIDTH PART NUMBERDouble Grouser 18.0" (460 mm) 8E-4424Triple Grouser (Center Punched Slots) 18.0" (460 mm) 8S-4468




Single Grouser - Moderate Service 18.0" (460 mm) 175-8020 175-8021Double Grouser 15.0" (380 mm) 8E-4724 8E-4725

977 SPROCKETS11K5959-UP, 14X

8.50" (215.9 mm) PITCH

(PER SIDE) QUANTITY PART NUMBERSprocket Hub 1 8P-0622 (20)

Sprocket Segment (Tough Steel) (5 Tooth) 5 197-9679

Mud/Snow Segment (Tough Steel) (5 Tooth) 5 255-9219Bolt 20 282-3655Nut 20 7H-3608

977 SPROCKETS11K2960-5958

8.00" (203.2 mm) PITCH


Sprocket Segment (3 Tooth) 9 6Y-5026Adapter Ring (22) 1 3S-8252Bolt 27 282-3655Nut 27 7H-3608

977 SPROCKETS46H, 11K1-2959

8.00" (203.2 mm) PITCH


Sprocket Segment (3 Tooth) 9 6Y-5026Adapter Ring (22) 1 3S-8252

20 Service Replaced by Classic 288-8731.21 Service Replaced by Classic 224-1312.22 Uses 8.50" (215.9 mm) Pitch Sprocket Segments; used to convert 8.00" (203.2 mm) Pitch machines23 Service replaced by Classic 224-1310.

508

977977 SPROCKETS46H, 11K1-29598.00" (203.2 mm) PITCH(Cont'd.)(PER SIDE) QUANTITY PART NUMBERBolt 27 282-3655Nut 27 7H-3608

977 SPROCKETS53A

8.00" (203.2 mm) PITCH

(PER SIDE) QUANTITY PART NUMBERSprocket Segment (5 Tooth) 2 3S-9138Sprocket Segment (4 Tooth) 4 3S-9139Adapter Ring (24) 1 3S-8252Rim 1 3S-7090Bolt 26 282-3655Nut 26 7H-3608

977 SPROCKETS20A

6.91" (175.5 mm) PITCH


Sprocket Segment (3 Tooth) 9 185-6151Mud/Snow Segment (3 Tooth) 9 8P-9453Adapter Ring 1 5S-0834Rim 1 5S-4822Bolt 27 3S-8182Nut 27 7H-3607

977 IDLERSCURRENT MODEL

11K, 14X, 46H, 48J, 70J

(PER MACHINE) QUANTITY PART NUMBERStandard Idler Assembly 2 1S-8186Extended Wear Idler Assembly (26) 2 277-4492Other ComponentsBushing Assembly 2 3P-8432Bearing (27) 1 8P-6651

24 Uses 8.50" (215.9 mm) Pitch Sprocket Segments; used to convert 8.00" (203.2 mm) Pitch machines25 Service replaced by Classic 227-4769.26 For use with Extended Wear Life Track27 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

509

977977 IDLERSCURRENT MODEL11K, 14X, 46H, 48J, 70J(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERShaft 1 9M-9758Bearing Block 1 7G-1901Bearing Block 1 7G-1902Seal – Duo-Cone Group 2 6Y-0925Toric Ring (28) 2 8H-2262Seal – Bushing O-Ring 2 4H-9105Seal – Shaft O-Ring 2 8F-6711Seal – Plug 1 1S-8947Bolt 12 3B-1915Washer 12 3B-4506Plug 1 2P-0347Lock 2 5M-5000Special Application SealsSeal – Duo-Cone Group (Steel Mill) 2 4S-8984Toric Ring (28) 2 9M-9730Bushing O-Ring (Steel Mill) 2 9M-9729Shaft O-Ring (Steel Mill) 2 8M-4390

977 IDLERSFORMER MODEL11K, 46H, 48J, 70J

(PER MACHINE) QUANTITY FORMER PART NUMBERExtended Wear Idler Assembly (29) 2 277-4492Standard Idler Assembly 2 1S-8186Other ComponentsBushing Assembly 2 3P-8432Bearing (30) 1 8P-6651Shaft 1 8M-0343Bearing Block 1 8M-0341Bearing Block 1 8M-0342Seal – Duo-Cone Group 2 6Y-0925Toric Ring (30) 2 8H-2262Seal – Bushing O-Ring 2 4H-9105Seal – Shaft O-Ring 2 8F-6711Seal – Plug 1 1S-8947

28 Component of preceding assembly or group; quantity shown is quantity per assembly or group.29 For use with Extended Wear Life Track30 Component of preceding assembly or group; quantity shown is quantity per assembly or group

510

977977 IDLERSFORMER MODEL11K, 46H, 48J, 70J(Cont'd.)(PER MACHINE) QUANTITY FORMER PART NUMBERExtended Wear Idler Assembly (29) 2 277-4492Standard Idler Assembly 2 1S-8186Bolt 12 3B-1915Washer 12 3B-4506Plug 1 2P-0347Lock 2 8M-0344Special Application SealsSeal – Duo-Cone Group (Steel Mill) 2 4S-8984Toric Ring (31) 2 9M-9730Bushing O-Ring (Steel Mill) 2 9M-9729Shaft O-Ring (Steel Mill) 2 8M-4390

977 IDLERS20A3044-UP, 53A

(PER MACHINE) QUANTITY PART NUMBERStandard Idler Assembly 2 9H-8489Extended Wear Idler Assembly (29) 2 277-4492Other ComponentsBushing Assembly 2 3P-8432Bearing (31) 1 8P-6651Shaft (Standard) 1 5M-2466Shaft (Optional) 1 8M-0343Bearing Block 1 2M-7689Bearing Block 1 2M-7690Seal – Duo-Cone Group 2 6Y-0925Toric Ring (31) 2 8H-2262Seal – Bushing O-Ring 2 4H-9105Seal – Shaft O-Ring 2 8F-6711Seal – Plug 1 1S-8947Bolt 12 3B-1915Washer 12 3B-4506Plug 1 2P-0347Special Application SealsSeal – Duo-Cone Group (Steel Mill) 2 4S-8984Toric Ring (31) 2 9M-9730

29 For use with Extended Wear Life Track31 Component of preceding assembly or group; quantity shown is quantity per assembly or group

511

977977 IDLERS20A3044-UP, 53A(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERStandard Idler Assembly 2 9H-8489Extended Wear Idler Assembly (32) 2 277-4492Bushing O-Ring (Steel Mill) 2 9M-9729Shaft O-Ring (Steel Mill) 2 8M-4390

977 CARRIER ROLLERS11K4184-UP, 14X

(PER MACHINE) QUANTITY PART NUMBERGroup 4 1P-8717Components of GroupRoller Shell 1 1P-8716Shaft 1 1P-8715Cup 2 9S-3581Cone 2 9S-3582Ring 1 7H-4574Cover 1 5M-2043Collar Assembly 1 7H-4571Plug 1 2P-0347Bolt 3 0S-1594Plate 1 8P-6188Bolt 2 6V-4791Seal – Duo-Cone Group 1 6Y-0925Toric Ring (32) 2 8H-2262Seal – Cover 1 2H-6338Seal – Plug 1 1S-8947Seal – Shaft O-Ring 1 1H-8720Special Application GroupsGroup (Steel Mill) 1 2P-3514Seal – Duo-Cone Group (Steel Mill) 1 4S-8984Toric Ring (32) 1 9M-9730Seal–Cover (Steel Mill) 1 2P-3538Seal–Shaft (Steel Mill) 1 1S-2174Group (Arctic) 4 255-8882


32 For use with Extended Wear Life Track32 Component of preceding group; quantity shown is the quantity per group.

512

977977 CARRIER ROLLERS11K1-4183, 20A2509-UP, 46H


Components of GroupRoller Shell 1 9S-8321Shaft 1 4S-9692Cup 2 7H-4566Cone 2 7H-4573Ring 1 7H-4574Cover 1 9M-0632Collar Assembly 1 7H-4571Support Assembly 1 9H-7687 (34)

Plug 1 2P-0347Bolt 4 0S-1594Ring 1 8H-5412Nut 1 8H-5411Seal – Duo-Cone Group 1 6Y-0925Toric Ring (35) 2 8H-2262Seal – Cover 1 2H-3934Seal – Support 1 5F-3144Seal – Shaft O-Ring 1 1S-8947Seal – Shaft O-Ring 1 1H-8720Special Application SealsSeal – Duo-Cone Group (Steel Mill) 1 4S-8984Toric Ring (35) 2 9M-9730

977 CARRIER ROLLERS20A1-2508

(PER MACHINE) QUANTITY PART NUMBERGroup 4 5A-8374Components of GroupRoller Shell 1 5A-8375Shaft 1 3T-3207Cup 2 9S-3581Cone 2 9S-3582Ring 1 1M-7914Cover 1 5M-2043Collar Assembly 1 9S-3567Plug 1 2P-0347

33 Upgrade to 1P-8717 group.34 Service replaced by 188-5612.35 Component of preceding group; quantity shown is the quantity per group.

513

977977 CARRIER ROLLERS20A1-2508(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERGroup 4 5A-8374Bolt 3 0S-1594Plate 1 8P-6188Bolt 2 5K-9107Seal – Duo-Cone Group 1 6Y-0925Toric Ring (36) 2 8H-2262Seal – Cover 1 2H-6338Seal – Plug 1 1S-8947Seal – Shaft O-Ring 1 1H-9696Special Application SealsSeal – Duo-Cone Group (Steel Mill) 1 4S-8984Toric Ring (36) 2 9M-9730

977 TRACK ROLLERS11K5959-UP, 14X, 46H



Extended Wear Life (DF) (39) 8 118-1637 (37)


Components of GroupRoller Shell (DF) 1 8S-2931Roller Shell (SF) 1 4S-9049Extended Wear Life Shell (DF) (39) 1 9W-8356Extended Wear Life Shell (SF) (39) 1 9W-8359Bushing Assembly 2 1P-8787Bearing (40) 1 8P-6651Shaft 1 118-1628 (41)


Bolt 12 2P-3201Ring 2 6H-2953Seal – Duo-Cone Group 2 6Y-0925Toric Ring (40) 2 8H-2262

36 Component of preceding group; quantity shown is the quantity per group.37 Serviced Replaced By: 1 - Roller Group (DF) 323-5928, 2 - End Cap 273-3996, 4 - Bolt 1D-4630, 4 - Washer 9H-1031.38 Serviced Replaced By: 1 - Roller Group (SF) 323-5925, 2 - End Cap 273-3996, 4 - Bolt 1D-4630, 4 - Washer 9H-1031.39 For use with Extended Wear Life Track.40 Component of preceding assembly or group; quantity shown is per assembly or group.41 Replaces former 9S-0313 shaft.42 If 9S-0313 shaft is used, use 1 – 9S-0312 and 1 – 9S-0311 end collar.

514

977977 TRACK ROLLERS11K5959-UP, 14X, 46H(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERSeal – Bushing O-Ring 2 4H-9105Seal – Shaft O-Ring 2 8F-6711Stopper 1 7G-4332Plug 1 6Y-0473Mounting Hardware (43)

Bolt (7/8") 4 1D-4629Washer 4 9H-1031Special Application SealsSeal – Duo-Cone Group (Steel Mill) 2 4S-8984Toric Ring (44) 2 9M-9730Bushing O-Ring (Steel Mill) 2 9M-9729Shaft O-Ring (Steel Mill) 2 8M-4390

977 TRACK ROLLERS11K1-5958, 46H, 53A2259-UP





Components of GroupRoller Shell (DF) 1 8S-2931Roller Shell (SF) 1 4S-9049Extended Wear Life Shell (DF) (47) 1 9W-8356Extended Wear Life Shell (SF) (47) 1 9W-8359Bushing Assembly 2 1P-8787Bearing (44) 1 8P-6651Shaft 1 118-1628 (48)


Bolt 12 2P-3201Ring 2 6H-2953Seal – Duo-Cone Group 2 6Y-0925Toric Ring (44) 2 8H-2262

43 These components are not included in the roller group; quantities shown are required to mount each roller.44 Component of preceding assembly or group; quantity shown is per assembly or group.45 Service replaced by 188-525846 Service replaced by 188-525747 For use with Extended Wear Life Track.48 Replaces former 7M-5109 shaft.49 If 7M-5109 shaft is used, use 1 – 7M-5112 and 1 – 7M-5111 end collar.

515

977977 TRACK ROLLERS11K1-5958, 46H, 53A2259-UP(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERSeal – Bushing O-Ring 2 4H-9105Seal – Shaft O-Ring 2 8F-6711Stopper 1 7G-4332Plug 1 6Y-0473Mounting Hardware (50)

Bolt (3/4") 4 1D-4609Washer 4 5H-1504Special Application SealsSeal – Duo-Cone Group (Steel Mill) 2 4S-8984Toric Ring (51) 2 9M-9730Bushing O-Ring (Steel Mill) 2 9M-9729Shaft O-Ring (Steel Mill) 2 8M-4390

977 TRACK ROLLERS20A3043-UP, 53A1-2258





Components of GroupRoller Shell (DF) 1 8S-2931Roller Shell (SF) 1 4S-9049Extended Wear Life Shell (DF) (52) 1 9W-8356Extended Wear Life Shell (SF) (52) 1 9W-8359Bushing Assembly 2 1P-8787Bearing (51) 1 8P-6651Shaft 1 5M-1732End Collar 1 7M-3308End Collar 1 7M-3309Bolt 12 2P-3201Ring 2 6H-2953Seal – Duo-Cone Group 2 6Y-0925Toric Ring (51) 2 8H-2262Seal – Bushing O-Ring 2 4H-9105Seal – Shaft O-Ring 2 8F-6711

50 These components are not included in the roller group; quantities shown are required to mount each roller.51 Component of preceding assembly or group; quantity shown is per assembly or group.52 For use with Extended Wear Life Track.

516

977977 TRACK ROLLERS20A3043-UP, 53A1-2258(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERStopper 1 7G-4332Plug 1 6Y-0473Mounting Hardware (53)

Bolt (5/8") 4 0S-2318Washer 4 3B-4510Special Application SealsSeal – Duo-Cone Group (Steel Mill) 2 4S-8984Toric Ring (54) 2 9M-9730Bushing O-Ring (Steel Mill) 2 9M-9729Shaft O-Ring (Steel Mill) 2 8M-4390

977 END GUIDING GUARDS46H, 48J, 70J, 11K



517

977977 FINAL DRIVE GUARDS

14X1950-UP(PER MACHINE) QUANTITY PART NUMBERGuard Assembly (RH) 1 8P-8489Guard Assembly (LH) 1 8P-8490Spacer 10 2A-0047Bolt 10 1A-8537

977 FINAL DRIVE GUARDS11K, 14X1-1949, 48J

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly (RH) 1 1P-8852Guard Assembly (LH) 1 1P-8851Bolt 10 0S-1566Lock Washer 10 3B-4510

518


38K, 58K9.00" (228.6 mm) PITCH – 7/8" BOLT


Track LinksRH Pin End Master 1 7S-9601LH Pin End Master 1 7S-9602RH Bushing End Master 1 7S-9603LH Bushing End Master 1 7S-9604RH Regular 41 7S-9181 (2)

LH Regular 41 7S-9182 (3)

Other ComponentsPin 42 2P-9486 (4)

Bushing 42 2P-9484 (5)

Seal Assembly (Rigid) 84 248-1539Thrust Ring 84 9W-3563 (6)


Bolt 164 7H-3599Nut 164 2S-2140Master Bolt 4 8S-0395Special Sets/GroupsSeal Set (82 Seal Assemblies) 1 250-2336Bushing and Seal Group (41 Sections) 1 9W-8936

983 SEALED TRACK38K, 58K

9.00" (228.6 mm) PITCH – 7/8" BOLT


Track LinksRH Pin End Master 1 7S-9601LH Pin End Master 1 7S-9602RH Bushing End Master 1 7S-9603LH Bushing End Master 1 7S-9604RH Regular 41 7S-9181 (2)

1 If 41, 42, section link assemblies are required order 188-5310 and add appropriate number of sections.2 Service Replaced by 188-5531.3 Service Replaced by 188-5532.4 Service Replaced by 188-5710.5 Serviced Replaced by Classic 188-5658.6 Service Replaced by 188-5689.7 Not part of link assembly; required to assemble track group

519

983983 SEALED TRACK38K, 58K9.00" (228.6 mm) PITCH – 7/8" BOLT(Cont'd.)

QUANTITY PART NUMBERLH Regular 41 7S-9182 (8)

Other ComponentsPin 42 1M-1455Bushing 42 8M-2619 (9)

Seal (Sealed) 168 8M-2620Track Hardware (10)

Bolt 164 7H-3599Nut 164 2S-2140Master Bolt 4 8S-0395Special Sets/GroupsPin and Bushing Group (41 Sections) 1 2P-6026




Single Grouser - Extreme Service 20.0" (510 mm) 7S-9096 (11) 8S-0390 (12)

Single Grouser - Extreme Service 22.0" (560 mm) 7S-9093 (13) 8S-0391 (14)

Single Grouser - Moderate Service 22.0" (560 mm) 2S-6345 (13) 8S-0385 (14)

Double Grouser 22.0" (560 mm) 2P-4092 2P-4093

983 SPROCKETS9.00" (228.6 mm) PITCH

(PER SIDE) QUANTITY PART NUMBERSprocket Hub 1 8P-1473Sprocket Segment (3 Tooth) 9 6T-6782 (15)

Mud/Snow Segment (3 Tooth) 9 9W-7259 (15)

Bolt 27 9S-2727Nut 27 7H-3609

8 Service Replaced by 188-5532.9 Serviced Replaced By 290-0844.10 Not part of link assembly; required to assemble track group11 Service replaced by 281-6370.12 Service replaced by 281-6371.13 Service replaced by 188-5617.14 Service replaced by 188-5618.15 Serviced Replaced By: 188-5641.

520

983983 IDLERS


Other ComponentsBushing Assembly 2 6P-2083Bearing (17) 1 8P-6650Shaft 1 9S-4324Bearing Block 1 9S-4325Bearing Block 1 9S-4326Seal – Duo-Cone Group 2 9W-2142Toric Ring (17) 2 8H-2265Seal – Bushing O-Ring 2 5F-3106Seal – Shaft O-Ring 2 1H-5728Seal – Plug 1 1S-8947Bolt 12 0S-1585Washer 12 3B-4508Plug 1 2P-0347Pin (Lock) 2 1S-3513Bolt 2 1A-1460Lock Washer 2 3B-4508Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 8S-5656Toric Ring (17) 2 8S-5653

983 CARRIER ROLLERSOUTSIDE MOUNT


Components of GroupRoller Shell 1 8P-6245Shaft 1 8P-6255Cup 2 7K-5448Cone 2 7K-5449Ring 1 9H-7759Cover 1 5M-2043Collar Assembly 1 9H-9414Plug 1 2P-0347Bolt 3 0S-1594Plate 1 3T-6269Bolt 2 6F-7030

16 Service Replaced by Classic part number 188-5610.17 Component of preceding assembly or group; quantity shown is quantity per assembly or group.18 Service replaced by 188-5612.

521

983983 CARRIER ROLLERSOUTSIDE MOUNT(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERLock Nut 1 0T-0329Seal – Duo-Cone Group 1 6Y-0925Toric Ring (19) 2 8H-2262Seal – Cover 1 2H-6338Seal – Plug 1 1S-8947Seal – Shaft O-Ring 1 1H-5728Special Application SealsSeal – Duo-Cone Group (Steel Mill) 1 4S-8984Toric Ring (19) 2 9M-9730

983 CARRIER ROLLERSINSIDE MOUNT


Components of GroupRoller Shell 1 9S-8304 (21)

Shaft 1 8M-0383Cup 2 6Y-7652Cone 2 4B-7255Ring 1 9H-7759Cover 1 5M-1669Collar Assembly 1 9H-9414Support Assembly 1 9H-7687 (22)

Plug 1 2P-0347Bolt 4 0S-1594Lock Nut 1 8H-6392Ring (Lock) 1 8H-6393Seal – Duo-Cone Group 1 6Y-0925Toric Ring (19) 2 8H-2262Seal – Cover 1 2H-3928Seal – Support 1 5F-3144Seal – Plug 1 1S-8947Seal – Shaft O-Ring 1 1H-5728Special Application Seals

19 Component of preceding group; quantity shown is the quantity per group20 Use 188-5612 group for service replacement.21 Service Replaced by Classic Carrier Roller Group part number 188-5612.22 Service replaced by 188-5612.

522

983983 CARRIER ROLLERSINSIDE MOUNT(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERSeal – Duo-Cone Group (Steel Mill) 1 4S-8984Toric Ring (23) 2 9M-9730

983 TRACK ROLLERS(PER MACHINE) QUANTITY PART NUMBERDouble Flange (DF) 8 123-1188

Single Flange (SF) 6 123-1186Components of GroupRoller Shell (DF) 1 9P-1449Roller Shell (SF) 1 9G-7046Bearing (24) 2 9S-4540Shaft 1 123-1191Retainer 2 8P-5394Thrust Washer 2 8E-7510End Collar 2 9S-4536Bolt 24 0S-1587Washer 24 3H-7654Seal – Duo-Cone Group 2 6Y-0925Toric Ring (24) 2 8H-2262Seal – Retainer O-Ring 2 5F-3106Seal – Shaft O-Ring 2 8F-6711Ring 2 6H-6237Stopper 1 7G-4332Plug 1 6Y-0473Lock (24) 1 8F-1190Plug (24) 1 2P-0347Mounting Hardware (25)

Bolt 4 1D-4630Washer 4 9H-1031Special Application Roller GroupsDouble Flange (DF) (Steel Mill) 8 123-1190Single Flange (SF) (Steel Mill) 6 128-8829Seal – Duo-Cone Group (Steel Mill) 2 4S-8984Toric Ring (24) 2 9M-9730Seal – Retainer O-Ring (Steel Mill) 2 4S-5898Seal – Shaft O-Ring (Steel Mill) 2 8M-4390

23 Component of preceding group; quantity shown is the quantity per group24 Component of preceding assembly or group, quantity per assembly or group.25 These components are not included in the roller group; quantities shown are required to mount each roller.

523

983983 END GUIDING GUARDS

(PER MACHINE) QUANTITY PART NUMBERFront (Outer LH, Inner RH)Guard Assembly 1 9S-1030Wear Strip 1 9M-6744Bolt 4 0S-1973Washer 4 5P-8249Front (Outer RH, Inner LH)Guard Assembly 1 9S-1029Wear Strip 1 9M-6743Bolt 4 0S-1973Washer 4 5P-8249Rear (Outer RH)Guard Assembly 1 9S-1030Wear Strip 1 9M-6744Bolt 4 0S-1973Washer 4 5P-8249Rear (Outer LH)Guard Assembly 1 9S-1029Wear Strip 1 9M-6743Bolt 4 0S-1973Washer 4 5P-8249

983 CENTER GUIDING GUARDS(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 3P-3836Wear Strip 4 3P-3804Bolt 16 0S-1592Bolt 8 1D-4630Washer 16 3B-4510Spacer 8 6K-6444

983 FINAL DRIVE GUARDS(PER MACHINE) QUANTITY PART NUMBERGuard 2 2S-0278Bolt 12 1S-0454Washer 12 5P-8249

525

ClassicD3G/C, D4G/C, 935, 933, 931 .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 526D5B, D6, 951, 955.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 529D6D, D6C, 955L .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 532D7G, D7F, 977L ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 535320BL, 320B, 320L, 320.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 537

526

D3G/C, D4G/C, 935, 933, 931D3G/C, D4G/C, 935, 933, 931 TRACK SALT

6.125" (155.6 MM) PITCH - 9/16" BOLT

CLASSIC PART NUMBER CAT PART NUMBERLink Assembly - 36 Section 257-1994 323-8758Link Assembly - 37 Section 257-1991 323-8759Link Assembly - 39 Section 257-1990 323-8757Link Assembly - 41 Section 257-1992 323-8756Components of Link AssemblyTrack LinksRH Master Link (Split Master Complete) 257-7767 –

LH Master Link (Split Master Complete) 257-7768 –

RH Regular 257-7765 6Y-0935LH Regular 257-7766 6Y-0936Other ComponentsPin 257-7769 303-9455Bushing 257-7770 188-6246Seal Assembly 257-7771 250-4002Thrust Ring 257-7772 6S-9049Stopper Use Cat 5G-2247Plug Use Cat 6Y-0473Track Hardware (1)

Nut Use Cat 7K-2017Bolt Use Cat 4K-7038Master Bolt (Included in Link Assembly) 257-7773 5A-3187

D3G/C, D4G/C, 935, 933, 931 TRACK SEALED6.125" (155.6 mm) PITCH - 9/16" BOLT

CLASSIC PART NUMBER CAT PART NUMBERLink Assembly - 36 Section 261-8008 6Y-1711Link Assembly - 39 Section 257-1993 6Y-1713Components of Link AssemblyTrack LinksRH Master Link (Split master Complete) 257-7767 –


RH Regular 257-7765 6Y-0935LH Regular 257-7766 6Y-0936Other ComponentsPin 257-7775 6B-5278Bushing 257-7776 6Y-1717Seal Washer 257-7777 6S-3146Track Hardware (1)


527

D3G/C, D4G/C, 935, 933, 931D3G/C, D4G/C, 935, 933, 931 TRACK SEALED6.125" (155.6 mm) PITCH - 9/16" BOLT(Cont'd.)

CLASSIC PART NUMBER CAT PART NUMBERBolt Use Cat 4K-7038Nut Use Cat 7K-2017Master Bolt (Included in Link Assembly) 257-7773 5A-3187

D3G/C, D4G/C, 935, 933, 931 TRACK SHOES6.125" (155.6 MM) PITCH - 9/16" BOLT

TYPE WIDTHCLASSIC

PART NUMBERCAT

PART NUMBERModerate Service (Clipped Grouser) 16.0" (405 mm) 275-3564 6Y-1381Moderate Service Master (Clipped Grouser) 16.0" (405 mm) 275-3565 6Y-1382Moderate Service (Clipped Grouser) 18.0" (460 mm) 275-3566 6Y-5344Moderate Service Master (Clipped Grouser) 18.0" (460 mm) 275-3567 6Y-5345Moderate Service (Clipped Grouser) 25.0" (635 mm) 275-3570 6Y-1385Moderate Service Master (Clipped Grouser) 25.0" (635 mm) 275-3571 6Y-1386

D3G/C, D4G/C, 935, 933, 931 SPROCKETS6.125" (155.6 MM) PITCH

(PER SIDE) CLASSIC PART NUMBER CAT PART NUMBERSprocketsSegment Gp. (Contains 5 segments - No hardware) 275-3576 – (2)

Segment Bolt - 1/2" (5 bolts required per segment) Use Cat 9W-9265Segment Nut (3) Use Cat 8H-5724Segment Washer (3) Use Cat 5P-8245

D3G/C, D4G/C, 935, 933, 931 TRACK ROLLERS, CARRIER ROLLERS, IDLERSCLASSIC PART NUMBER CAT PART NUMBER

Track RollersTrack Roller Group - SF 275-3579 281-8339Track Roller Group - DF 275-3580 281-8338Mounting Bolts - 12 mm (D4G/D3G) Use Cat 6V-8197Mounting Washers - (D4G/D3G) Use Cat 2M-0849Mounting Bolts - 1/2" (D4C/D3C) Use Cat 0S-1585Mounting Washers - (D4C/D3C) Use Cat 2M-0849Carrier RollersCarrier Roller Group 275-3578 6S-3609Idlers

2 Order 5 segments 190-73963 Not required for Hystat machines (only bolts).

528

D3G/C, D4G/C, 935, 933, 931D3G/C, D4G/C, 935, 933, 931 TRACK ROLLERS, CARRIER ROLLERS, IDLERS (Cont'd.)

CLASSIC PART NUMBER CAT PART NUMBERIdler Group (With Brackets) (D4G/D3G) 275-4086 – (4)

Idler Group (With Brackets) (D4C/D3C) 275-3581 – (5)

4 Idler Groups 184-6590 or 184-65915 Idler Group 164-1047

529

D5B, D6, 951, 955D5B, D6, 951, 955 TRACK SALT

D5B: 51H, 52H, 81H, 82H, 83H, 84H, 21J, 37J, 54J, 62J, 63J, 67J, 93J, 94J, 95J, 96J, 97J, 98J, 22X, 23X, 24X, 25X, 26X, 43X, 44X, 45X, 46X,47X, 48X, 49X, 54X, 9RG, 21Y, 8MB, 6R, 12R, 68J

955: 31J, 48H, 57J, 60A, 61H, 64J1-9257, 71J1-5831, 72A, 77A, 85J1-10128, 93A,951: 15F, 19H, 32F, 44Z, 69H1869&UP, 72J, 78Y, 79H, 86J1992&UP

D6B: 37A, 44A, 8U, 9U6.91" (175.4 mm) PITCH - 5/8" BOLT

NEW CLASSIC PART NUMBER CAT PART NUMBERLink Assembly - 39 Section 257-8020 (1) 154-3662Link Assembly - 41 Section 260-1509 (1) 154-3667Link Assembly - 46 Section 257-8021 (1) 154-3676Components of Link AssemblyTrack LinksRH Master Link (Split Master Complete) 257-8016 –


RH Regular 257-8012 7T-4539LH Regular 257-8013 7T-4540Other ComponentsPin 260-1507 160-7818Bushing 260-1508 7T-4636Seal Assembly 259-7062 250-3990Thrust Ring 188-5773 3P-3878Stopper Use Cat 5G-2247Plug Use Cat 6Y-0473Track Hardware (2)

Bolt 175-8552 7H-3597Nut 200-9150 1M-1408Master Bolt (Included in Link Assembly) 200-9133 3P-2274

D5B, D6, 951, 955 TRACK SEALEDD5B: 51H, 52H, 81H, 82H, 83H, 84H, 21J, 37J, 54J, 62J, 63J, 67J, 93J, 94J, 95J, 96J, 97J, 98J, 22X, 23X, 24X, 25X, 26X, 43X, 44X, 45X, 46X,

47X, 48X, 49X, 54X, 9RG, 21Y, 8MB, 6R, 12R, 68J955: 31J, 48H, 57J, 60A, 61H, 64J1-9257, 71J1-5831, 72A, 77A, 85J1-10128, 93A,

951: 15F, 19H, 32F, 44Z, 69H1869&UP, 72J, 78Y, 79H, 86J1992&UPD6B: 37A, 44A, 8U, 9U

6.91" (175.5 mm) PITCH - 5/8" BOLTNEW CLASSICPART NUMBER CAT PART NUMBER

Link Assembly - 46 Section (with split master links) 257-8022 (1) 3P-5762

Components of Link AssemblyTrack LinksRH Master Link (Split Master Complete) 257-8016 –


RH Regular 257-8012 7T-4539

1 Classic link assemblies have EWL link height of 109 mm2 Not part of link assembly; required to assemble track group.

530

D5B, D6, 951, 955D5B, D6, 951, 955 TRACK SEALEDD5B: 51H, 52H, 81H, 82H, 83H, 84H, 21J, 37J, 54J, 62J, 63J, 67J, 93J, 94J, 95J, 96J, 97J, 98J, 22X, 23X, 24X, 25X, 26X, 43X, 44X, 45X, 46X,47X, 48X, 49X, 54X, 9RG, 21Y, 8MB, 6R, 12R, 68J955: 31J, 48H, 57J, 60A, 61H, 64J1-9257, 71J1-5831, 72A, 77A, 85J1-10128, 93A,951: 15F, 19H, 32F, 44Z, 69H1869&UP, 72J, 78Y, 79H, 86J1992&UPD6B: 37A, 44A, 8U, 9U6.91" (175.5 mm) PITCH - 5/8" BOLT(Cont'd.)

NEW CLASSICPART NUMBER CAT PART NUMBER

LH Regular 257-8013 7T-4540Other ComponentsPin 175-8923 6B-5502Bushing 260-1512 5S-0710Seal Washer 188-5765 5S-0709Track Hardware (3)

Bolt 175-8552 7H-3597Nut 200-9150 1M-1408Master Bolt (Included in Link Assembly) 200-9133 3P-2274Special Sets/GroupsPin and Bushing Group (40 Sections sealed track) – –

Pin and Bushing Group (46 Sections sealed track)) – –

D5B, D6, 951, 955 TRACK SHOES6.91" (175.5 MM) PITCH - 5/8" BOLT

TYPE WIDTHCLASSIC

PART NUMBER CAT PART NUMBERModerate Service 18.0" (460 mm) 175-8020 5S-0821Moderate Service Master 18.0" (460 mm) 175-8021 3P-3889Moderate Service 20.0" (510 mm) 175-8365 5S-0822Moderate Service Master 20.0" (510 mm) 175-8366 3P-3890Moderate Service 22.0" (560 mm) 175-8367 5S-0823Moderate Service Master 22.0" (560 mm) 175-8368 3P-3891Moderate Service 24.0" (610 mm) 175-8673 7S-0706Moderate Service Master 24.0" (610 mm) 175-8674 3P-3892Moderate Service 34.0" (865 mm) 175-8022 7S-9567Moderate Service Master 34.0" (865 mm) 175-8023 3P-3896Triple Grouser 15.0" (380 mm) 175-8553 3T-3690Double Grouser Master (Use w/triple) 15.0" (380 mm) – 8E-4725 (4)

3 Not part of link assembly; required to assemble track group.4 Trim grouser to match triple grouser height.

531

D5B, D6, 951, 955D5B, D6, SPROCKETS*

CLASSICPART NUMBER

CATPART NUMBER

SprocketsSegment Gp. (Contains 9 segments - No hardware) 260-1511 – (5)

Segment Bolt - 5/8" (3 bolts required per segment) Use Cat 3S-8182Segment Nut Use Cat 7H-3607

* Segments cannot be used on 951, 955 machines due to different segment bolt pattern design, use Cat genuine segments.

D5B, D6, 951, 955 TRACK ROLLERS, CARRIER ROLLERS, IDLERSCLASSIC

PART NUMBERCAT

PART NUMBERTrack RollersTrack Roller Group - SF 175-8024 118-1611 (6)

Track Roller Group - DF 175-8025 118-1612 (7)

Mounting Bolts - 5/8" Use Cat 8S-9092Mounting Washers - 5/8" Use Cat 5P-8247Carrier RollersCarrier Roller Group 200-9185 5A-8374IdlersIdler Group (Complete) (Also used on 561D Pipelayer, Serial No. 54X) 200-9235 –

Idler Assembly (shell without bushings) 175-8255 8S-2560 (8)

5 Order 9 segments 185-61516 Serviced Replaced By: 1 - Roller Group (SF) 310-4912, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247.7 Serviced Replaced By: 1 - Roller Group (DF) 310-4915, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247.8 Serviced Replaced By - 7T-3501.

532

D6D, D6C, 955LD6D, D6C, 955L TRACK SALT

D6D: 3X, 4X, 5X, 6X, 19X, 20X, 30X, 31X, 32X, 33X, 74W, 75W, 1Y, 7XFD6C: 41A, 71A, 73A, 74A, 76A, 82A, 83A, 96A, 46J, 47J, 55J, 56J, 69J, 99J, 10K, 26K, 23U, 90B, 69U, 49W, 17R

955L: 13X, 8Y, 57M, 85J10029&UP, 64J10441&UP, 71J6181 & UP8.00" (203.2 mm) PITCH - 3/4" BOLT

CLASSIC PART NUMBER CAT PART NUMBERLink Assembly - 36 Section 175-8555 (1) 236-9861Link Assembly - 39 Section 188-5527 (1) 236-9864Link Assembly - 41 Section 188-5588 (1) 236-9866Components of Link AssemblyTrack LinksRH Master Link (Split Master Complete) 175-8927 –


RH Regular 175-8256 7T-4645LH Regular 175-8257 7T-4646Other ComponentsPin 188-5694 160-7819Bushing (Outside Diameter 69 mm) 188-5693 3P-1109Seal Assembly 259-7063 250-3996Thrust Ring 188-5679 3P-1104Stopper Use Cat 9G-1642Plug Use Cat 6Y-0473Track Hardware (2)

Bolt 188-5633 1S-1859Nut 188-5856 1S-1860Master Bolt (Included in Link Assembly) 188-5634 9S-1838

D6D, D6C, 955L TRACK SEALEDD6D: 3X, 4X, 5X, 6X, 19X, 20X, 30X, 31X, 32X, 33X, 74W, 1Y, 7XF

D6C: 41A, 71A, 73A, 74A, 76A, 82A, 83A, 96A, 46J, 47J, 55J, 56J, 69J, 99J, 10K, 26K, 23U, 90B, 69U, 49W, 17R955L: 13X, 8Y, 57M, 85J10029&UP, 64J10441&UP, 71J6181 & UP

8.00" (203.2 mm) PITCH - 3/4" BOLTNEW CLASSICPART NUMBER

FORMER CLASSICPART NUMBER

CATPART NUMBER

Link Assembly - 36 Section (with split master links) 290-6589 –

Link Assembly - 36 Section (w/o split master links) –

Components of Link AssemblyTrack LinksRH Master Link (Split Master Complete) 175-8927 – –

LH Master Link (Split Master Complete) 175-8928 – –

RH Regular 175-8256 175-8256 7T-4645LH Regular 175-8257 175-8257 7T-4646Other Components

1 Link assembly is similar to Extended Wear life track (bushing diameter 69 mm vs, 72 mm).2 Not part of link assembly; required to assemble track group.

533

D6D, D6C, 955LD6D, D6C, 955L TRACK SEALEDD6D: 3X, 4X, 5X, 6X, 19X, 20X, 30X, 31X, 32X, 33X, 74W, 1Y, 7XFD6C: 41A, 71A, 73A, 74A, 76A, 82A, 83A, 96A, 46J, 47J, 55J, 56J, 69J, 99J, 10K, 26K, 23U, 90B, 69U, 49W, 17R955L: 13X, 8Y, 57M, 85J10029&UP, 64J10441&UP, 71J6181 & UP8.00" (203.2 mm) PITCH - 3/4" BOLT(Cont'd.)

NEW CLASSICPART NUMBER

FORMER CLASSICPART NUMBER

CATPART NUMBER

Pin 175-8929 175-8929 4M-5989Master Pin – 289-0639 8E-0855Bushing 310-6654 310-6654 4M-5991Master Bushing – Use Cat 4M-5992Seal 314-7841 314-7841 8M-7231Spacer (Master Joint) – – 8M-7290Track Hardware (3)

Bolt 188-5633 188-5633 1S-1859Nut 188-5856 188-5856 1S-1860Master Bolt (Included in Link Assembly) 188-5634 188-5634 9S-1838Special Sets/GroupsPin and Bushing Group (36 Sections) (SealedTrack W/Split Master Links)

316-1443 316-1443 (4) –

D6D, D6C, 955L TRACK SHOES8.00" (203.2 mm) PITCH - 3/4" BOLT

TYPE WIDTH CLASSIC PART NUMBER CAT PART NUMBERModerate Service 18.0" (460 mm) 188-5270 6Y-6289Moderate Service Master 18.0" (460 mm) 175-8728 6Y-6290Moderate Service 20.0" (510 mm) 175-8031 6Y-6291Moderate Service Master 20.0" (510 mm) 175-8032 6Y-6292Moderate Service 22.0" (560 mm) 175-8369 6Y-6293Moderate Service Master 22.0" (560 mm) 175-8370 6Y-6294Moderate Service 24.0" (610 mm) 175-8371 6Y-6295Moderate Service Master 24.0" (610 mm) 175-8372 6Y-6296Extreme Service 20.0" (510 mm) 188-5396 6Y-6395Extreme Service Master 20.0" (510 mm) 188-5591 6Y-6394Extreme Service 22.0" (560 mm) 188-5397 6Y-6411Extreme Service Master 22.0" (560 mm) 188-5592 6Y-6412Extreme Service 24.0" (610 mm) 188-5593 6Y-6398Extreme Service Master 24.0" (610 mm) 188-5594 6Y-6397Double Grouser 17.0" (432 mm) 188-5381 8E-4501Double Grouser Master 17.0" (432 mm) 188-5385 8E-4502

3 Not part of link assembly; required to assemble track group.4 If used with link assembly 175-8353, must also order the following: 1 - Master Bushing - 4M-5992, 1 - Master Pin - 8E-0855, 4 - Seal

Washer - 8M-7231, 2 - Spacer - 8M-7290.

534

D6D, D6C, 955LD6D, D6C, 955L TRACK SHOES8.00" (203.2 mm) PITCH - 3/4" BOLT(Cont'd.)TYPE WIDTH CLASSIC PART NUMBER CAT PART NUMBERDouble Grouser 21.0" (534 mm) 188-5383 8E-4499Double Grouser Master 21.0" (534 mm) 188-5387 8E-4500

D6D, D6C, 955L SPROCKETS8.00" (203.2 mm) PITCH

CLASSIC PART NUMBER CAT PART NUMBERSprocketsSegment Gp. (Contains 5 segments - No hardware) 188-5635 – (5)

Segment Bolt - 5/8" (4 required per segment) Use Cat 3S-8182Segment Nut Use Cat 7H-3607Segment Gp. (Contains 5 segments - No hardware) (Formachine Serial No. 6HC)

260-5851 – (6)

Segment Bolt - 3/4" (4 required per segment) Use Cat 117-1617Segment Nut Use Cat 7H-3608

D6D, D6C, 955L TRACK ROLLERS, CARRIER ROLLERS, IDLERSCLASSIC PART NUMBER CAT PART NUMBER

Track RollersTrack Roller Group - SF (3/4" mounting bolt) 188-5272 118-1617 (7)

Track Roller Group - DF (3/4" mounting bolt) 188-5271 118-1618 (8)

Mounting Bolts - 3/4" Use Cat 1D-4608Mounting Washers 3/4" Use Cat 5H-1504Track Roller Gp. - SF (5/8" mounting bolt) 175-8035 118-1614 (9)

Track Roller Gp. - DF (5/8" mounting bolt) 175-8036 118-1615 (10)

Mounting Bolts - 5/8" Use Cat 1A-8537Mounting Washer - 5/8" Use Cat 2S-0736Carrier RollersCarrier Roller Group 188-5590 3T-3206IdlersIdler Group (Complete) 200-9236 6L-9210Idler Group 175-8038 (11) –

Idler Assembly (shell without bushings) 175-8263 7T-4562

5 Order 5 segments 258-9797.6 Order 5 segments 117-1616.7 Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-9079, 4 - Bolt 1D-4610, 4 - Washer 5P-8248.8 Serviced Replaced By: 1 - Roller Group (DF) 288-0935, 2 - End Cap 317-9079, 4 - Bolt 1D-4610, 4 - Washer 5P-8248.9 Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-9078, 4 - Bolt 1D-4585, 4 - Washer 2S-0736.10 Serviced Replaced By: 1 - Roller Group (DF) 288-0935, 2 - End Cap 317-9078, 4 - Bolt 1D-4585, 4 - Washer 2S-0736.11 The Idler Group 175-8038 includes shaft and bushings, (not a complete top level group) no bearing blocks. Use Caterpillar 6Y-0925 Duo-

Cone™ Seal Groups and Caterpillar bearing blocks 5M-5003/5M-5004 for final group assembly.

535

D7G, D7F, 977LD7G, D7F, 977L TRACK SALT

D7G: 64V, 65V, 91V, 92VD7F: 91E, 92E, 93N, 94N

977L: 14X, 64X, 95X, 11K5959&UP, 70J2772&UP8.50" (215.9 mm) PITCH - 3/4" BOLT

CLASSIC PART NUMBER CAT PART NUMBERLink Assembly - 38 Section (D7) 188-5595 117-1024

Link Assembly - 39 Section (977) 175-8759 3P-0628Components of Link AssemblyTrack LinksLink - RH Master (Split Master Complete) 188-5700 –

Link - LH Master (Split Master Complete) 188-5701 –

Link - RH 188-5251 8S-2589Link - LH 188-5252 8S-2590Other ComponentsPin 188-5699 3P-0622Bushing 188-5698 3P-0621Seal Assembly 259-7064 250-3998Thrust Ring 188-5721 3P-0623Stopper Use Cat 7G-4332Plug Use Cat 6Y-0473Track Hardware (1)

Bolt 188-5636 7H-3598Nut 188-5856 1S-1860Master Bolt (Included in Link Assembly) 188-5637 2P-9670

D7G, D7F, 977L TRACK SHOE8.50" (215.9 mm) PITCH - 3/4" BOLT

TYPE WIDTH CLASSIC PART NUMBER CAT PART NUMBERModerate Service 20.0" (510 mm) 188-5333 1P-9807Moderate Service Master 20.0" (510 mm) 188-5601 3P-0615Moderate Service 22.0" (560 mm) 175-8802 1P-9808Moderate Service Master 22.0" (560 mm) 175-8881 3P-0616Moderate Service 24.0" (610 mm) 175-8882 1P-9809Moderate Service Master 24.0" (610 mm) 188-5246 3P-0617Moderate Service 26.0" (660 mm) 188-5334 1P-9810Moderate Service Master 26.0" (660 mm) 188-5602 3P-0618Extreme Service 22.0" (560 mm) 188-5603 5S-6910Extreme Service Master 22.0" (560 mm) 188-5604 2P-9669Extreme Service 24.0" (610 mm) 188-5605 5S-6911Extreme Service Master 24.0" (610 mm) 188-5606 3P-0620Double Grouser 18.0" (460 mm) 188-5263 8E-4434Double Grouser Master 18.0" (460 mm) 188-5264 8E-4435


536

D7G, D7F, 977LD7G, D7F, 977L TRACK SHOE8.50" (215.9 mm) PITCH - 3/4" BOLT(Cont'd.)TYPE WIDTH CLASSIC PART NUMBER CAT PART NUMBERDouble Grouser (TRAP) 18.0" (460 mm) 188-5261 8E-4436Double Grouser Master (TRAP) 18.0" (460 mm) 188-5262 8E-4437

D7G, D7F, 977L SPROCKETSCLASSIC PART NUMBER CAT PART NUMBER

SprocketsSegment Gp. (Contains 5 segments - No hardware) 188-5638 – (2)

Segment Bolt - 3/4" (4 required per segment) Use Cat 282-3655Segment Nut Use Cat 7H-3608

D7G, D7F, 977L TRACK ROLLERS, CARRIER ROLLERS, IDLERSCLASSIC PART NUMBER CAT PART NUMBER

Track RollersTrack Roller Group - SF (7/8" mounting bolt) 188-5596 118-1623Track Roller Group - DF (7/8" mounting bolt) 188-5597 118-1625Mounting Bolts - 7/8" Use Cat 1D-4629Mounting Washers 7/8" Use Cat 9H-1031Track Roller Gp. - SF (3/4" mounting bolt) 188-5257 118-1619Track Roller Gp. - DF (3/4" mounting bolt) 188-5258 118-1620Mounting Bolts - 3/4" Use Cat 1D-4609Mounting Washer - 3/4" Use Cat 5H-1504Carrier RollersCarrier Roller Group 188-5600 1P-8717IdlersIdler Group (Complete) 200-9237 6L-9211Idler Assembly (shell without bushings) 188-5268 (3) 1S-8186

2 Order 5 segments 197-9679.3 Two different idler shafts can be used with the 188-5268 idler assembly, but idler shafts require different bearing blocks see the follow-

ing: Idler Shaft 8M-0343 (end diameters 63.5 mm) requires the use of 8M-0341 & 8M-0342 bearing blocks. Idler Shaft 9M-9758 (end diam-eters 62.7 mm) requires the use of 7G-1901 & 7G-1902 bearing blocks.

537

320BL, 320B, 320L, 320320BL, 320B, 320L, 320 GREASE LUBRICATED TRACK

Slip Fit Master7.50" (190.5 mm) PITCH - 20 mm BOLT

CLASSIC PART NUMBER CAT PART NUMBERLink Assembly - 45 Section 308-6229 194-1609Link Assembly - 49 Section 308-6230 194-1608Components of Link AssemblyTrack LinksRH Master Link 308-3056 8E-8585LH Master Link 308-3057 8E-8586RH Regular 287-3118 9W-3137LH Regular 287-3119 9W-3138Other ComponentsPin 175-8923 6Y-8186Master Pin 287-3231 188-3064Bushing 289-4955 190-3523Master Bushing 289-4956 190-3524Cotter Pin 287-3232 095-0863Seal - Grease 289-0646 158-4380Spacer Use Cat 158-4381Track Hardware (1)

Bolt 286-9828 9W-3619Nut 200-9127 9W-3361

320BL, 320B, 320L, 320 TRACK SHOES7.50" (190.5 mm) PITCH - 20 mm BOLT

TYPE WIDTHCLASSIC PARTNUMBER CAT PART NUMBER

Triple Grouser (Center Punched Slots) 19.7" (500 mm) 335-5478 126-5061Triple Grouser (Center Punched Slots) 23.6" (600 mm) 286-9827 126-5062Triple Grouser (Center Punched Slots) 27.6" (700 mm) 286-9826 6I-9454Triple Grouser (Center Punched Slots) 31.5" (800 mm) 286-9825 9W-9351

320BL, 320B, 320L, 320 SPROCKETCLASSIC PART NUMBER CAT PART NUMBER

Sprocket Rim (21 Tooth) 286-9821 8E-9805

320BL, 320B, 320L, 320 IDLERCLASSIC PART NUMBER CAT PART NUMBER

Idler Group 286-9830 248-7143


538

320BL, 320B, 320L, 320320BL, 320B, 320L, 320 CARRIER ROLLER

CLASSIC PART NUMBER CAT PART NUMBERCarrier Roller Group 392-9537 8E-5600

320BL, 320B, 320L, 320 TRACK ROLLERCLASSIC PART NUMBER CAT PART NUMBER

Track Roller Group (Single Flange) 286-9823 163-4143 (2)

2 Serviced Replaced by - 348-1867.

539

Excavators/Front Shovels312D, 311D, 314C, 313C, 312C, 311C, 313B, 312B, 311B, 312, 311 .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 540316E, 315D, 315C, 315B, 315 .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 546317BL, 317 .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 550318C, 318B .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 554323E, 323D, 321D, 321C, 320D, 320C, 319D, 319C, 320B, 320 ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 559323DS, 320CS, 320BS, 320S.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 567324E, 324D, 322C, 322B, 322 .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 572329E, 329D, 325D, 325C, 325B, 325 ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 584336E, 336D, 330D, 330C, 330B, 330, 328D .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 596349E, 345D, 345C, 345B ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 608350 .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 614374D, 365CL, 365BL .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 616375, 5080 ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 619390D, 390DL, 385C, 385B, 5090 .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6225110B .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6275130B, 5130 .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6315230 .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 634205 .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 637211 .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 643213 .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 649215 .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 655215SA, 219, 225 .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 665225SA, FB227, 229, 231 ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 677235 .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 686245 .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 702E70B, E70 .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 711E120B, E120, E110B, E110 .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 715E140 .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 720E180, EL180 .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 722E200B, EL200B ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 725E240C, EL240C, E240B, EL240B, E240, EL240.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 727E300B, EL300B, E300, EL300 .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 732E450 .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 737E650 .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 740

540

312D, 311D, 314C, 313C, 312C, 311C, 313B, 312B, 311B, 312, 311311D, 311C, 311B, 311 GENERAL DUTY TRACK

CLK, CKE, 2LS, 2MS, 5PK, 8GR, 8HR, 9LJ, AKW6.75" (171.5 mm) PITCH – 16 mm BOLT

(PER MACHINE) QUANTITYGREASED

PART NUMBERLink Assembly – 41 Section 2 176-4874Components of Link AssemblyTrack LinksRH Master 1 4I-7477LH Master 1 4I-7478RH Regular 40 4I-7475LH Regular 40 4I-7476Other ComponentsPin 40 162-4305Master Pin 1 099-0653Bushing 40 162-4304Master Bushing 1 162-4306Seal (Poly - W) 80 162-4307Seal - Master (Poly - W) 2 176-4872Cotter Pin 1 095-0863Track Hardware (1)

Bolt 164 4I-7538Nut 164 5I-6125

312D, 312C, 312B GREASED GENERAL DUTY TRACK43 SECTION: 6SW0457 & UP, 9NW210 & UP, BNN, DBN, HJX 46 SECTION: 2KW0223 & UP, 9FS0682-UP,CBT

6.75" (171.5 mm) PITCH – 16 mm BOLT

PART NUMBER 43 SECTION 46 SECTIONLink Assembly (Quantity 2) 180-2689 184-5859Components of Link AssemblyTrack LinksRH Master 180-2687 1 1LH Master 180-2686 1 1RH Regular 9K-6629 42 45LH Regular 9K-6628 42 45Other ComponentsPin 9K-4060 42 45Master Pin 180-2684 1 1Bushing 180-2681 42 45Master Bushing 180-2683 1 1Seal 179-9339 84 90Master Seal 179-9340 2 2Cotter Pin 095-0863 1 1Track Hardware (1)


541

312D, 311D, 314C, 313C, 312C, 311C, 313B, 312B, 311B, 312, 311312D, 312C, 312B GREASED GENERAL DUTY TRACK43 SECTION: 6SW0457 & UP, 9NW210 & UP, BNN, DBN, HJX 46 SECTION: 2KW0223 & UP, 9FS0682-UP,CBT6.75" (171.5 mm) PITCH – 16 mm BOLT(Cont'd.)

PART NUMBER 43 SECTION 46 SECTIONBolt 4I-7538 172 184Nut 5I-6125 172 184

312B TRACK43 SECTION: 6SW1-456, 9NW1-209 46 SECTION: 2KW1-0222, 9FS1-0681

6.75" (171.5 mm) PITCH – 16 mm BOLT

SEALED PART NUMBER 43 SECTION 46 SECTIONLink Assembly (Quantity 2) 146-9175 150-4419Components of Link AssemblyTrack LinksRH Master 4I-7477 1 1LH Master 4I-7478 1 1RH Regular 4I-7475 42 45LH Regular 4I-7476 42 45Other ComponentsPin 5I-6140 42 45Master Pin 099-0653 1 1Bushing 146-9174 42 45Master Bushing 093-1887 1 1Seal (Spring Washer) 5K-2707 172 184Spacer 147-0423 2 2Cotter Pin 095-0863 1 1Track Hardware (2)

Bolt 4I-7538 172 184Nut 5I-6125 172 184

314C, 313C, 312D/C/B, 312, 311DL GENERAL DUTY TRACKCAE, FDS, HGF, WSA, 2NS, 3ES, 6BL, 6GK, 6SW, 7DK, 8JR, 9GR, 9HR, 9NW, KJA, KHB, CLA, DDW, HCW, FBJ

6.75" (171.5 mm) PITCH – 16 mm BOLT

QUANTITYGREASE

PART NUMBERLATEST GREASEPART NUMBER

Link Assembly – 43 Section 2 – (3) 176-4870Components of Link AssemblyTrack LinksRH Master 1 4I-7477 4I-7477LH Master 1 4I-7478 4I-7478RH Regular 42 4I-7475 4I-7475LH Regular 42 4I-7476 4I-7476

2 Not part of link assembly; required to assemble track group.3 Upgrade to 176-4870.

542

312D, 311D, 314C, 313C, 312C, 311C, 313B, 312B, 311B, 312, 311314C, 313C, 312D/C/B, 312, 311DL GENERAL DUTY TRACKCAE, FDS, HGF, WSA, 2NS, 3ES, 6BL, 6GK, 6SW, 7DK, 8JR, 9GR, 9HR, 9NW, KJA, KHB, CLA, DDW, HCW, FBJ6.75" (171.5 mm) PITCH – 16 mm BOLT(Cont'd.)

QUANTITYGREASE

PART NUMBERLATEST GREASEPART NUMBER

Other ComponentsPin 42 162-4305 162-4305Master Pin 1 099-0653 099-0653Bushing 42 162-4304 162-4304Master Bushing 1 162-4306 162-4306Seal (Poly - W) 84 162-4307 162-4307Seal - Master (Poly - W) 2 – 176-4872Spacer 2 093-0037 –

Cotter Pin 1 095-0863 095-0863Track Hardware (4)

Bolt 172 4I-7538 4I-7538Nut 172 5I-6125 5I-6125

314CL, 312DL, 312CL, 312BL GENERAL DUTY TRACKCBA, 3FS, PCA, JBC, KCD, TGY

6.75" (171.5 mm) PITCH – 16 mm BOLT

QUANTITYGREASED

PART NUMBERLink Assembly – 46 Section 2 176-4871Components of Link AssemblyTrack LinksRH Master 1 4I-7477LH Master 1 4I-7478RH Regular 45 4I-7475LH Regular 45 4I-7476Other ComponentsPin 45 162-4305Master Pin 1 099-0653Bushing 45 162-4304Master Bushing 1 162-4306Seal (Poly - W) 90 162-4307Seal - Master (Poly - W) 2 176-4872Seal (Resin) 90 –

Spacer 2 –

Cotter Pin 1 095-0863Track Hardware (4)

Bolt 184 4I-7538Nut 184 5I-6125


543

312D, 311D, 314C, 313C, 312C, 311C, 313B, 312B, 311B, 312, 311314C, 313C/B, 312D/C/B, 311D/C/B, 312, 311 GENERAL DUTY TRACK SHOES

6.75" (171.5 mm) PITCH – 16 mm BOLT

TYPE WIDTH GROUSER HEIGHT PART NUMBERTriple Grouser(4 extra bolt holes on outer edge of shoe) (5)

19.7" (500 mm) 20 mm 137-6114

Triple Grouser (6) 19.7" (500 mm) 20 mm 1R-6008Triple Grouser (6) 23.6" (600 mm) 20 mm 1R-6009Triple Grouser (6) 27.6" (700 mm) 20 mm 1R-6010Triple Grouser (6) 30.3" (770 mm) 20 mm 1R-6011Triple Grouser (6) 19.7" (500 mm) 25 mm 3A-8962Triple Grouser (6) 23.6" (600 mm) 25 mm 3A-8967Triple Grouser (6) 27.6" (700 mm) 25 mm 3A-8968Triple Grouser (6) 30.3" (770 mm) 25 mm 3A-8969Triple Grouser (6) 33.5" (850 mm) 25 mm 117-1771Self-Cleaning 30.3" (770 mm) – 096-0231Flat 19.7" (500 mm) – 096-0240Rubber Pad 19.7" (500 mm) – 1R-9814

311D/C/B, 311 RUBBER TRACK(PER SIDE) WIDTH PART NUMBERSegment Rubber (41 Section) 19.7" (500 mm) – (7)

314C, 312D/C/B, 312, 311DL RUBBER TRACK(PER SIDE) WIDTH PART NUMBERSegment Rubber (43 Section) 19.7" (500 mm) – (8)

314CL, 312DL, 312CL, 312BL, 312L RUBBER TRACK(PER SIDE) WIDTH PART NUMBERSegment Rubber (46 Section) 19.7" (500 mm) – (9)

313C/B, 312C/B, 312 RUBBER TRACKONE PIECE

(PER MACHINE) WIDTH QUANTITY PART NUMBERRubber Track(One Piece) 19.7" (500 mm) 2 136-0351

5 Center Punched slots; Rubber Pad Assembly 170-4418, Nut 137-6109, Washer 137-6108.6 Center Punched slots7 Required per side, (1) 169-8089-shoe as., (1) 169-8090-shoe as. To replace one rubber shoe order 169-8093. Hardware use: Bolt 096-1043,

Nut 5I-61258 Required per side, (1) 169-8089-shoe as., (1) 169-8091-shoe as. To replace one rubber shoe order 169-8093. Hardware use: Bolt 096-1043,

Nut 5I-61259 Required per side, (2) 169-8091-shoe as. To replace one rubber shoe order 169-8093. Hardware use: Bolt 096-1043, Nut 5I-6125

544

312D, 311D, 314C, 313C, 312C, 311C, 313B, 312B, 311B, 312, 311314C, 313C/B, 312D/C/B, 311D/C/B, 312, 311 GENERAL DUTY SPROCKETS

(PER SIDE) QUANTITY PART NUMBERSprocket Rim (21 Teeth) (10) 1 4I-7472Bolt 15 8T-7338

312D/C/B GENERAL DUTY SPROCKETS2KW223-UP, 6SW457-UP, 9FS682-UP, 9NW210-UP, CBT, BNN, HJX

(PER SIDE) QUANTITY PART NUMBERSprocket Rim (21 Teeth) (11) 1 180-2677Bolt 15 8T-7338

314C, 313C/B, 312D/C/B, 311D/C/B, 312, 311 GENERAL DUTY IDLERS(PER MACHINE) QUANTITY PART NUMBERIdler Group 2 4I-7337Components of GroupIdler Assembly 1 6I-6590Bearing (12) 2 099-0157Shaft 1 6I-6477Bearing Block 2 4I-7488Pin 2 099-0163Seal – Duo-Cone Group 2 099-0159Toric Ring (12) 2 099-0160Seal – Shaft O-Ring 2 095-1662Plug 1 7H-3171

314C, 313C/B, 312D/C/B, 311D/C/B, 312, 311 GENERAL DUTY CARRIER ROLLERS(PER MACHINE) QUANTITY PART NUMBERGroup 2 4I-7345Mounting Hardware (13)

Bolt 1 8T-5878

314C, 313C/B, 312D/C/B, 311D/C/B, 312, 311 GENERAL DUTY TRACK ROLLERS(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) – (14) 248-7259Components of GroupRoller Shell (SF) 1 6I-6451

10 Use with 176-4870 link assembly.11 Use with 184-5859 or 180-2689 link assembly12 Component of preceding assembly or group; quantity shown is quantity per assembly or group13 Not included in roller group; quantity shown is required to mount each roller.14 311D, 311DL, 312D require 12 rollers. 312DL require 14 rollers.

545

312D, 311D, 314C, 313C, 312C, 311C, 313B, 312B, 311B, 312, 311314C, 313C/B, 312D/C/B, 311D/C/B, 312, 311 GENERAL DUTY TRACK ROLLERS (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERBearing (15) 2 099-0195Shaft 1 248-7262End Collar 1 248-7260End Collar (With oil fill hole) 1 248-7261Dowel 2 6I-6549Pin 1 6I-6549Seal – Duo-Cone Group 2 340-8206Toric Ring (15) 2 099-0194Seal – Shaft O-Ring 2 6V-7660Plug 1 3D-4603Mounting Hardware (16)

Bolt 4 7X-2555Washer 4 8T-4122

314C, 313C, 312D/C/B, 311D CENTER GENERAL DUTY GUIDING GUARDS(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 133-2554Bolt 8 8T-4779Washer 8 9X-8257

314C, 313C, 312D/C/B, 311D CENTER GENERAL DUTY GUIDING GUARDS(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 218-5485Guard Assembly 4 218-5486Bar 12 162-7431Bolt M16 48 7X-2553Washer 48 9X-8257


546

316E, 315D, 315C, 315B, 315315C/B, 315 TRACKCFL, CFB, 1SW, 4YM, 6XM

7.50" (190.5 mm) PITCH – 20 mm BOLT

QUANTITYGREASED

PART NUMBERLink Assembly – 41 Section 2 194-1133 (1)

Components of Link AssemblyTrack LinksRH Master 1 8E-8585LH Master 1 8E-8586RH Regular 40 9W-3137LH Regular 40 9W-3138Other ComponentsPin 40 6Y-8186Master Pin 1 188-3064Bushing 40 190-3523Master Bushing 1 190-3524Seal (Poly - W) 80 158-4380Seal - Master (Poly - W) 2 158-4381Seal (Spring Washer) 164 –

Spacer 2 –


Bolt 164 9W-3619Nut 164 9W-3361Special GroupPin and Bushing Group (51 Sections) 1 246-1906

316EL, 315DL, 315D, 315CL, 315BL, 315L TRACKCJN, NCM, BYK, KBD, CFT, CJC, ANF, 3AW, 6YM

7.50" (190.5 mm) PITCH – 20 mm BOLT

QUANTITYGREASED

PART NUMBERLink Assembly – 44 Section 2 194-1134 (1)

Components of Link AssemblyTrack LinksRH Master 1 8E-8585LH Master 1 8E-8586RH Regular 43 9W-3137LH Regular 43 9W-3138Other ComponentsPin 43 6Y-8186Master Pin 1 188-3064

1 Stepped Bushing Design.2 Not part of link assembly; required to assemble track group.

547

316E, 315D, 315C, 315B, 315316EL, 315DL, 315D, 315CL, 315BL, 315L TRACKCJN, NCM, BYK, KBD, CFT, CJC, ANF, 3AW, 6YM7.50" (190.5 mm) PITCH – 20 mm BOLT(Cont'd.)

QUANTITYGREASED

PART NUMBERBushing 43 190-3523Master Bushing 1 190-3524Seal - (Poly - W) 86 158-4380Seal - Master (Poly - W) 2 158-4381Seal (Spring Washer) 176 –

Spacer 2 –


Bolt 176 9W-3619Nut 176 9W-3361Special GroupPin and Bushing Group (51 Sections) 1 246-1906

315D/C/B, 315 TRACK SHOES7.50" (190.5 mm) PITCH – 20 mm BOLT

TYPE WIDTH PART NUMBERTriple Grouser (Center Punched Slots) 19.7" (500 mm) 126-5061Triple Grouser (Center Punched Slots) (4) 23.6" (600 mm) 126-5062Triple Grouser (Center Punched Slots) 27.6" (700 mm) 126-5063Triple Grouser (Center Punched Slots) (5) 31.5" (800 mm) 9W-9351Self-Cleaning Shoe (5) 31.5" (800 mm) 8E-8835

315D/C SPROCKETS(PER SIDE) QUANTITY PART NUMBERSprocket Rim (21 Teeth) 1 8E-9805Bolt 16 7X-2562

315B, 315 SPROCKETS(PER SIDE) QUANTITY PART NUMBERSprocket Rim (21 Teeth) 1 102-8134Bolt 22 8T-4193

3 Not part of link assembly; required to assemble track group.4 Rubber pad option 130-45345 Typically used on long configurations "L" only.

548

316E, 315D, 315C, 315B, 315315D/C/B, 315, IDLERS


Components of GroupIdler Assembly 1 262-4781Bearing (6) 2 8E-4359Shaft 1 246-5425Bearing Block 2 239-4362Pin 2 9W-9455Seal – Duo-Cone Group 2 9W-2201Toric Ring (6) 2 6H-1309Seal – Shaft O-Ring 2 6V-7658Plug 1 7H-3171

315D/C/B, 315 CARRIER ROLLERS(PER MACHINE) QUANTITY PART NUMBERGroup 4 8E-5600Mounting Hardware (7)

Bolt 1 8T-5878

315D/C/B, 315 TRACK ROLLERS(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) 12 (8) 348-1867

Double Flange (DF) – (9) 348-1868Mounting Hardware (10)


315D/C/B, 315 TRACK ROLLERS HEAVY DUTY(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) (Heavy Duty) – (11) 206-1265Mounting Hardware (10)


6 Component of preceding assembly or group; quantity shown is quantity per assembly or group7 Not included in roller group; quantity shown is required to mount each roller.8 14 rollers required for 315L, 315BL, 315CL, 315DL, 315D machines.9 Used as required.10 These components are not included in the roller group; quantities shown are required to mount each roller.11 Use as required.

549

316E, 315D, 315C, 315B, 315315D, 315C, 315B, 315 CENTER GUIDING GUARDS

USE WITH 6 AND 7 ROLLER, TRACK ROLLER FRAMES

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 240-2988Bolt 8 8T-5460Washer 8 8T-4123

315D, 315C, 315B, 315 TRACK GUIDING GUARDS (FRONT OR REAR)USE WITH 7 ROLLER TRACK ROLLER FRAMES

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 111-0106Bolt (20 mm) 12 8T-5460Washer 12 8T-4123

315C, 315B, 315 TRACK GUIDING GUARDS (FRONT)USE WITH 6 ROLLER TRACK ROLLER FRAMES


315C, 315B, 315 TRACK GUIDING GUARDS (REAR)USE WITH 6 ROLLER TRACK ROLLER FRAMES


550

317BL, 317317, 317N TRACK

4MM, 9SR7.50" (190.5 mm) PITCH – 20 mm BOLT

QUANTITY GREASED PART NUMBERLink Assembly – 44 Section 2 194-1134 (1)

Components of Link AssemblyTrack LinksRH Master 1 8E-8585LH Master 1 8E-8586RH Regular 43 9W-3137LH Regular 43 9W-3138Other ComponentsPin 43 6Y-8186Master Pin 1 188-3064Bushing 43 190-3523Master Bushing 1 190-3524Seal (Poly - W) 86 158-4380Seal - Master (Poly - W) 2 158-4381Seal (Spring Washer) 176 –

Spacer 2 –


Bolt 176 9W-3619Bolt (3) 176 6Y-0846Nut 176 9W-3361Special GroupPin and Bushing Group (51 Sections) 1 246-1906

317BL, 317BLN TRACKGREASE LUBRICATED

6DZ, 9WW7.50" (190.5 mm) PITCH – 20 mm BOLT


Components of Link AssemblyTrack LinksRH Master 1 8E-8585LH Master 1 8E-8586RH Regular 44 9W-3137LH Regular 44 9W-3138Other Components

1 Stepped bushing design.2 Not part of link assembly; required to assemble track group.3 For use with Extreme Service and Double Grouser Track Shoes.4 Stepped Bushing Design.

551

317BL, 317317BL, 317BLN TRACKGREASE LUBRICATED6DZ, 9WW7.50" (190.5 mm) PITCH – 20 mm BOLT(Cont'd.)

QUANTITY PART NUMBERPin 44 6Y-8186Master Pin 1 188-3064Bushing 44 190-3523Master Bushing 1 190-3524Seal - (Poly-W) 88 158-4380Seal - Master (Poly-W) 2 158-4381Cotter Pin 1 095-0863Track Hardware (5)


317BL, 317BLN, 317, 317N TRACK SHOES7.50" (190.5 mm) PITCH – 20 mm BOLT

TYPE WIDTH PART NUMBERTriple Grouser (Center Punched Slots) 19.7" (500 mm) 126-5061Triple Grouser (Center Punched Slots) (7) 23.6" (600 mm) 126-5062Triple Grouser (Center Punched Slots) 27.6" (700 mm) 126-5063

317BL, 317BLN, 317, 317N SPROCKETS(PER SIDE) QUANTITY PART NUMBERSprocket Rim (21 Teeth) 1 102-8134Bolt 22 8T-4193

317BL, 317BLN, 317, 317N IDLERS(PER MACHINE) QUANTITY PART NUMBERIdler Group 2 248-7143Components of GroupIdler Assembly 1 115-4926Bearing (8) 2 8E-4359Shaft 1 246-5425

5 Not part of link assembly; required to assemble track group.6 For use with Extreme Service and Double Grouser Track Shoes.7 Rubber pad option 130-45348 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

552

317BL, 317317BL, 317BLN, 317, 317N IDLERS (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERBearing Block 2 239-4362Pin 2 9W-9455Seal – Duo-Cone Group 2 9W-2201Toric Ring (9) 2 6H-1309Seal – Shaft O-Ring 2 6V-7658Plug 1 7H-3171

317BL, 317BLN, 317, 317N CARRIER ROLLERS(PER MACHINE) QUANTITY PART NUMBERGroup 4 8E-5600Mounting Hardware (10)

Bolt 1 8T-5878

317BL, 317BLN, 317, 317N TRACK ROLLERS(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) 14 348-1867



317BL, 317BLN, 317, 317N TRACK ROLLERS HEAVY DUTY(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) (Heavy Duty) – (11) 206-1265Mounting Hardware (12)


317BL, 317BLN CENTER GUIDING GUARDS(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 117-5553Bolt 8 8T-5460Washer 8 8T-4123

9 Component of preceding assembly or group; quantity shown is quantity per assembly or group.10 Not included in roller group; quantity shown is required to mount each roller.11 Use as required.12 These components are not included in the roller group; quantities shown are required to mount each roller.

553

317BL, 317317, 317N CENTER GUIDING GUARDS


554

318C, 318B318CL, 318CLN TRACK

GREASED LUBRICATEDCWP, GPA, MDY


Link Assembly – 47 Section 2 337-9045Components of Link AssemblyTrack LinksRH Regular 47 335-9246LH Regular 47 335-9247Other ComponentsPin 46 340-8908Master Pin 1 340-8907Bushing 46 190-3523Master Bushing 1 190-3524Seal (Poly - W) 92 158-4380Seal - Master (Poly - W) 2 158-4381Cotter Pin 1 095-0863Track Hardware (1)


318CL TRACKGREASED LUBRICATED

DAH7.50" (190.5 mm)PITCH - 20 mm BOLT

QUANTITY PART NUMBERLink Assembly – 49 Section 2 194-1608Components of Link AssemblyTrack LinksRH Master 1 8E-8585LH Master 1 8E-8586RH Regular 48 9W-3137LH Regular 48 9W-3138Other ComponentsPin 48 6Y-8186Master Pin 1 188-3064Bushing 48 190-3523Master Bushing 1 190-3524Seal (Poly - W) 96 158-4380

1 Not part of link assembly; required to assemble track group.2 For use with Extreme Service and Double Grouser Track Shoes.

555

318C, 318B318CL TRACKGREASED LUBRICATEDDAH7.50" (190.5 mm)PITCH - 20 mm BOLT(Cont'd.)

QUANTITY PART NUMBERSeal - Master (Poly - W) 2 158-4381Cotter Pin 1 095-0863Track Hardware (3)


318C, 318BL, 318BN TRACKGREASE LUBRICATEDADC, AEJ, BTG, FAA

7.50" (190.5 mm) PITCH – 20 mm BOLT

(PER MACHINE) QUANTITY PART NUMBERLink Assembly – 45 Section 2 194-1609 (5)

Components of Link AssemblyTrack LinksRH Master 1 8E-8585LH Master 1 8E-8586RH Regular 44 9W-3137LH Regular 44 9W-3138Other ComponentsPin 44 6Y-8186Master Pin 1 188-3064Bushing 44 190-3523Master Bushing 1 190-3524Seal (Poly - W) 88 158-4380Seal - Master (Poly - W) 2 158-4381Cotter Pin 1 095-0863Track Hardware (3)


3 Not part of link assembly; required to assemble track group.4 For use with Extreme Service and Double Grouser Track Shoes.5 Stepped bushing design.

556

318C, 318B318B, 318BL, 318BN TRACK

SEALED3LR, 5BJ, 7KZ

7.50" (190.5 mm) PITCH – 20 mm BOLTQUANTITY PART NUMBER


Components of Link AssemblyTrack LinksRH Master 1 8E-8585LH Master 1 8E-8586RH Regular 44 9W-3137LH Regular 44 9W-3138Other ComponentsPin 44 6Y-8186Master Pin 1 188-3064Bushing 44 117-1371Master Bushing 1 117-1372Seal (Spring Washer) 180 5S-0709Spacer 2 5S-0754Cotter Pin 1 095-0863Track Hardware (7)


318C/B, 318BL, 318BN TRACK SHOES7.50" (190.5 mm) PITCH – 20 mm BOLT

TYPE WIDTH PART NUMBERTriple Grouser (Center Punched Slots) 19.7" (500 mm) 126-5061Triple Grouser (Center Punched Slots) (9) 23.6" (600 mm) 126-5062Triple Grouser (Center Punched Slots) 27.6" (700 mm) 6I-9454Triple Grouser (Center Punched Slots) 31.5" (800 mm) 9W-9351Triple Grouser (Heavy Duty, Center Punched Slots) 19.7" (500 mm) 121-0133

6 Upgrade to 194-1609.7 Not part of link assembly; required to assemble track group.8 For use with Extreme Service and Double Grouser Track Shoes.9 Rubber pad option 130-4534

557

318C, 318B318BL, 318BN SPROCKETS

GREASE LUBRICATEDADC, AEJ

(PER SIDE) QUANTITY PART NUMBERSprocket Rim (21 Teeth) 1 102-8134Bolt 22 8T-4183

318C/B, 318BL, 318BN SPROCKETSGREASED CWP, GPA, MDY SEALED 3LR, 5BJ, 7KZ

(PER SIDE) QUANTITY PART NUMBERSprocket Rim (21 Teeth) 1 8E-9805Bolt 16 7X-2562

318C/B, 318BL, 318BN IDLERS(PER MACHINE) QUANTITY PART NUMBERIdler Group 2 248-7143


318C/B, 318BL, 318BN CARRIER ROLLERS(PER MACHINE) QUANTITY PART NUMBERGroup 4 8E-5600Mounting Hardware (11)

Bolt 1 8T-5878

318C/B, 318BL, 318BN TRACK ROLLERS(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) 14 348-1867


10 Component of preceding assembly or group; quantity shown is quantity per assembly or group.11 Not included in roller group; quantity shown is required to mount each roller.12 Use as required.13 These components are not included in the roller group; quantities shown are required to mount each roller.

558

318C, 318B318C/B, 318BL, 318BN TRACK ROLLERS (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERBolt 4 7X-2565Washer 4 8T-4123

318C/B, 318BL, 318BN TRACK ROLLERS HEAVY DUTY(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) (Heavy Duty) – (14) 206-1265Mounting Hardware (15)


318C CENTER GUIDING GUARDS(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 240-2988Bolt 8 8T-5460Washer 8 8T-4123

318B, 318BL, 318BN CENTER GUIDING GUARDS(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 117-5553Bolt 8 8T-5460Washer 8 8T-4123

14 Use as required.15 These components are not included in the roller group; quantities shown are required to mount each roller.

559

323E, 323D, 321D, 321C, 320D, 320C, 319D, 319C, 320B, 320321D, 321C, 320D, 320C TRACK

GREASE LUBRICATEDAKH, AMC, APA, BCB, BDC, BEF, CLM, BPR, BCN, GLA, CCD, FBA, FBB, MAA, DAX, JCX, AZR, DWZ, FAL, AGF, MCH, EBT, WFD, CXY,

DFT, RBL, KGL, SNS, AMR, YDS, GNG, MAB, RAW, JGZ, BWZ, BZP, DFT, GKS, JFZ, KLM, PCM, KTF, GKL, GMX, RBL7.50" (190.5 mm) PITCH – 20 mm BOLT


Components of Link AssemblyTrack LinksRH Master 1 8E-8585LH Master 1 8E-8586RH Regular 44 9W-3137LH Regular 44 9W-3138Other ComponentsPin 44 6Y-8186Master Pin 1 188-3064Bushing 44 190-3523Master Bushing 1 190-3524Seal (Poly - W) 88 158-4380Seal - Master (Poly -W ) 2 158-4381Cotter Pin 1 095-0863Track Hardware (2)


320EL, 323DL, 321DL, 321CL, 320DL, 320CL, 319D, 319C, TRACKGREASE LUBRICATED

ALF, ALX, ANB, BDB, JPL, PAA, PAB, GAA, GAB, HBC, BDE, BEA, BER, BKK, CLZ, BRX, KBB, MCF, KGL, BGB, BZH, DAY, EAW, FMH,KBH, MDT, NAS, PBD, BYM, JLG, CYD, RAC, PBM, SDC, NDE, BWP, CWN, ZGB, DHK, WJN, TAE, KAF, BZF, SCW, PHX, A9F, EBY, KGF,A8F, FXF, XCF, FNA, DFB, EAG, HKT, MDE, GDP, PDS, SPN, TDH, PCX, WBN, DHE, EBY, EJT, FXK, HJC, SCW, TAE, XCK, ZGB, TNJ,

WBK, PNL, TFX7.50" (190.5 mm) PITCH – 20 mm BOLT


Components of Link AssemblyTrack LinksRH Master 1 8E-8585LH Master 1 8E-8586RH Regular 48 9W-3137LH Regular 48 9W-3138

1 Stepped Bushing Design.2 Not part of link assembly; required to assemble track group.3 For use with Extreme Service and Double Grouser Track Shoes.4 Stepped bushing design.

560

323E, 323D, 321D, 321C, 320D, 320C, 319D, 319C, 320B, 320320EL, 323DL, 321DL, 321CL, 320DL, 320CL, 319D, 319C, TRACKGREASE LUBRICATEDALF, ALX, ANB, BDB, JPL, PAA, PAB, GAA, GAB, HBC, BDE, BEA, BER, BKK, CLZ, BRX, KBB, MCF, KGL, BGB, BZH, DAY, EAW, FMH,KBH, MDT, NAS, PBD, BYM, JLG, CYD, RAC, PBM, SDC, NDE, BWP, CWN, ZGB, DHK, WJN, TAE, KAF, BZF, SCW, PHX, A9F, EBY, KGF,A8F, FXF, XCF, FNA, DFB, EAG, HKT, MDE, GDP, PDS, SPN, TDH, PCX, WBN, DHE, EBY, EJT, FXK, HJC, SCW, TAE, XCK, ZGB, TNJ,WBK, PNL, TFX7.50" (190.5 mm) PITCH – 20 mm BOLT(Cont'd.)

QUANTITY PART NUMBEROther ComponentsPin 48 6Y-8186Master Pin 1 188-3064Bushing 48 190-3523Master Bushing 1 190-3524Seal (Poly - W) 96 158-4380Seal - Master (Poly - W) 2 158-4381Cotter Pin 1 095-0863Track Hardware (5)


320B/C/D GENERAL DUTY LINK ASSEMBLIES7.50" (190.5 mm) PITCH – 20 mm Bolt

(PER MACHINE) QUANTITY 45 Section PART NUMBER 49 Section PART NUMBERLink Assembly 2 422-5505 422-5504

Utilizes standard GLT UC components for repair parts. Reference the 45 and 49 section GLT sections for more information.

320B/C/D GENERAL DUTY TRACK GROUPS (45 SECTIONS)Link Assembly Used 422-5505 QUANTITY PART NUMBERTriple Grouser (center punched slots) Shoe –23.6” (600 mm) 2 422-6106

320B/C/D GENERAL DUTY TRACK GROUPS (49 SECTIONS)Link Assembly Used 422-5504 QUANTITY PART NUMBERTriple Grouser (center punched slots) –23.6” (600 mm) 2 422-6107Triple Grouser (center punched slots) –31” (790 mm) 2 422-6827


561

323E, 323D, 321D, 321C, 320D, 320C, 319D, 319C, 320B, 320320DL, 320CL FORESTRY MACHINE TRACK

SAH, GKS, BWW, SRT, EAX7.50" (190.5 mm) PITCH - 3/4" BOLT

QUANTITY GREASED PART NUMBERLink Assembly – (50 Sections) 2 206-1469Components of Link AssemblyTrack LinksRH Pin End Master 1 106-1627LH Pin End Master 1 106-1628RH Bushing End Master 1 106-1629LH Bushing End Master 1 106-1630RH Regular 49 106-1625LH Regular 49 106-1626Other ComponentsPin 50 206-1470Bushing 50 106-1618Seal Assembly (Rigid) 100 250-3988Thrust Ring 100 152-8070Track Hardware (7)

Bolt 196 6V-1792Nut 196 1S-1860Master Bolt 2 106-1642Master Bolt 2 107-0719

323D, 321D, 321C, 320D, 320C, 319D, 319C, 320B, 320 TRACK SHOES7.50" (190.5 mm) PITCH – 20 mm BOLT

TYPE WIDTH PART NUMBERSingle Grouser (Trapezoidal Opening, Clipped Grouser) 23.6" (600 mm) 106-0614Double Grouser (Trapezoidal Opening) 23.6" (600 mm) 106-0615Double Grouser (Trapezoidal Opening) 27.6" (700 mm) 106-0616Triple Grouser (Center Punched Slots) 19.7" (500 mm) 126-5061Triple Grouser (Center Punched Slots) (8) 23.6" (600 mm) 126-5062Triple Grouser (Center Punched Slots) 27.6" (700 mm) 6I-9454Triple Grouser (Center Punched Slots) 30.0” (780 mm) 332-8903Triple Grouser (Center Punched Slots) 31.5" (800 mm) 9W-9351Triple Grouser (Center Punched Slots) 34.5" (900 mm) 9W-9352Triple Grouser (Heavy Duty, Center Punched Slots) 19.7" (500 mm) 121-0133Triple Grouser (Heavy Duty, Center Punched Slots) 23.6" (600 mm) 121-0134Triple Grouser (Heavy Duty, Center Punched Slots) 25.6" (650 mm) 1Q-4772Triple Grouser (Heavy Duty, Center Punched Slots) 27.6" (700 mm) 121-0135

7 Not part of link assembly; required to assemble track group.8 Rubber pad option 130-4534

562

323E, 323D, 321D, 321C, 320D, 320C, 319D, 319C, 320B, 320323D, 321D, 321C, 320D, 320C, 319D, 319C, 320B, 320 TRACK SHOES7.50" (190.5 mm) PITCH – 20 mm BOLT(Cont'd.)TYPE WIDTH PART NUMBERTriple Grouser (Heavy Duty, Center Punched Slots) 31.5" (800 mm) 161-6304Self-Cleaning 31.5" (800 mm) 8E-8835

320D, 320C FORESTRY MACHINE TRACK SHOES7.50" (190.5 mm) PITCH - 3/4" BOLT



Single Grouser (Trapezoidal Opening)(Clipped Grouser) 24" (610 mm) 207-4873 207-4874Double Grouser (Trapezoidal Opening) 23.6" (600 mm) 224-7269 224-7732Double Grouser (Trapezoidal Opening) 27.5" (700 mm) 206-1479 206-1480Triple Grouser 27.5" (700 mm) 224-7270 224-7733Triple Grouser (Heavy Duty, Center PunchedSlots)

31.5" (800 mm) 143-9192 143-9194

320B/C/D GENERAL DUTY SHOESTrack Groups have shoes that are not serviced, Triple Grouser (center punched slots) shoes are available for useon link assemblies. Refer to the table above for more information on offerings.

323D, 321D, 321C, 320D, 320C, 319D, 319C, 320B, 320 SPROCKETS(PER SIDE) QUANTITY PART NUMBERSprocket Rim (21 Teeth) 1 8E-9805Bolt 16 7X-2562 (9)

320B/C/D GENERAL DUTY SPROCKETS(PER SIDE) QUANTITY PART NUMBERSprocket Rim (21 teeth) 1 422-8785Bolt M20 16 7X-2562

320C, 320B, 320 SPROCKETUSE WITH FORESTRY MACHINE LINK ASSEMBLY

(PER SIDE) QUANTITY PART NUMBERSprocket Rim (21 Teeth) 1 235-5260Bolt 16 7X-2562

9 Use 8T-5460 bolts on 319C machines.

563

323E, 323D, 321D, 321C, 320D, 320C, 319D, 319C, 320B, 320320C SPROCKETS

BGB(PER SIDE) QUANTITY PART NUMBERSprocket Rim (21 Teeth) (Use with 325 final drive) 1 187-6540Bolt 18 7X-2562

320D, 320C SPROCKETSUSE WITH FORESTRY MACHINE LINK ASSEMBLY

SAH, GKS, BWW, SRT, EAX

(PER SIDE) QUANTITY PART NUMBERSprocket Rim (21 Teeth) (Use with 325 final drive) 1 221-0010Bolt 18 7X-2562

323D, 321D, 321C, 320D, 320C, 319D, 319C, 320B, 320 IDLERS(PER MACHINE) QUANTITY PART NUMBERIdler Group 2 248-7143


320B/C/D GENERAL DUTY IDLERS(PER MACHINE) QUANTITY PART NUMBERIdler Group 2 422-8791

323D, 321D, 321C, 320D, 320C, 319D, 319C, 320B, 320 CARRIER ROLLERS(PER MACHINE) QUANTITY PART NUMBERGroup 4 8E-5600Mounting Hardware (11)

Bolt 1 8T-5878

10 Component of preceding assembly or group; quantity shown is quantity per assembly or group11 Not included in roller group; quantity shown is required to mount each roller.

564

323E, 323D, 321D, 321C, 320D, 320C, 319D, 319C, 320B, 320320B/C/D GENERAL DUTY CARRIER ROLLERS

(PER MACHINE) QUANTITY PART NUMBERCarrier Roller 4 392-9537

323D, 321D, 321C, 320D, 320C, 319D, 319C, 320B, 320 TRACK ROLLERS(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) – (12) 348-1867



320B/C/D GENERAL DUTY ROLLERS WITH END CAPSQUANTITY PER MACHINE PART NUMBER

Single Flange Roller (15) 14 422-8790Roller Hardware (320) (14) QUANTITY PER ROLLERBolt – M20 4 7X-2565Washer 4 8T-4123

320D, 320C TRACK ROLLERSBCB, MAA, BEF, EBT, SNS

(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) 8 348-1867

Double Flange (DF) 6 348-1868Mounting Hardware (14)


320DL, 320CL TRACK ROLLERSBDB, PAA, BBC, WJN, FNA


Double Flange (DF) 8 348-1868Mounting Hardware (14)


12 14 Single flange roller groups used on the following machines: BCN, CCD, FBA, FBB, AKH, AMC, APA, BDC, CLM, BPR, DAX, JCX, MCH,WFD, RBL, YDS, DWZ, AMR, AZR, CXY, DFT, GKL, FAL, AGF. 16 Single flange roller groups used on the following machines: GLA, GAA,GAB, HBC, PAB, BDE, BEA, ALF, ALX, ANB, BER, BRX, CLZ, KBB, MCF, KGL, BZH, DAY, EAW, FMH, KBH, MDT, NAS, PBD, BYM, JLG,CYD, RAC, PBM, SDC, NDE, SRT, ZGB, TAE, SCW, EBY, KGF, FXF, DFB, KAF, BWP, CWN, DHK, FXK, PHX, XCK, A9F, A8F.

13 Use as required.14 These components are not included in the roller group; quantities shown are required to mount each roller.15 16 - SF rollers for L series machines.

565

323E, 323D, 321D, 321C, 320D, 320C, 319D, 319C, 320B, 320323D, 321D, 321C, 320D, 320C, 319D, 319C, 320B, 320 TRACK ROLLERS HEAVY DUTY

Standard on these serial number machines: SAH, BGB, BKK, JPL, GKS, BWW, BZF, EAX (16 required) Optional use for all other 319,320, 321, 323 machines

(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) (Heavy Duty) – (16) 206-1265Mounting Hardware (17)


323D, 321D, 321C, 320D, 320C, 319D, 319C, 320B, 320 CENTER GUIDING GUARDS(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 240-2988Bolt 8 8T-5460Washer 8 8T-4123

320C CENTER GUIDING GUARDSJPL


321D, 320D, 320C TRACK ROLLER GUARD (FULL LENGTH)Use with 45 section link assembly

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 219-8468Bolt (M 20) 24 8T-5460Washer 24 8T-4123

323DL, 321DL, 319DL, 320DL, 320CL TRACK ROLLER GUARDS (FULL LENGTH)Use with 49 section link assembly


16 Use as required.17 These components are not included in the roller group; quantities shown are required to mount each roller.

566

323E, 323D, 321D, 321C, 320D, 320C, 319D, 319C, 320B, 320320DL, 320CL TRACK ROLLER GUARDS (FULL LENGTH)

Use with Forestry Machine TrackSAH, EAX


321D, 320D, 320C SPROCKET REAR GUARDSUse with 45 section link assembly


323DL, 321DL, 319DL, 320DL, 320CL SPROCKET REAR GUARDSUse with 49 section link assembly


320DL, 320CL SHOE SUPPORT GUARDSBGB, BZF

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 186-5502Guard Assembly 4 186-5503Bolt (M 20) 32 8T-5460Bolt (M 20) 32 8T-6430Washer 64 8T-4123Bar 16 5Q-3369

320DL FORESTRY MACHINE TRACK SHOE SUPPORT GUARDSGKS, EAX

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 284-7361Guard Assembly 4 284-7362Bolt (M 20) Guard Assembly to Frame 32 8T-6430Washer 32 8T-4123Bar 16 5Q-3369Bolt (M 20) 32 8T-5460Washer 32 8T-4123

567

323DS, 320CS, 320BS, 320S323DS, 320CS, 320BS TRACK

SLIP FIT MASTER LINKS5MS, BBL, SED, DKW

8.00" (203.2 mm) PITCH -20 mm BOLTQUANTITY GREASED PART NUMBER

Link Assembly – 45 Section 2 201-9116Components of Link AssemblyTrack LinksRH Master 1 115-1853LH Master 1 115-1854RH Regular 44 6Y-1607LH Regular 44 6Y-1608Other ComponentsPin 44 6Y-0851Master Pin (Slip Fit) 1 188-3065Bushing 44 321-1462Master Bushing 1 201-0826Seal (Ploy W) 88 179-3425Seal - Master (Poly W) 2 179-3427Seal (Spring Washer) 180 –

Spacer 2 –

Cotter 1 095-7944Track Hardware (1)

Bolt 180 306-2148Nut 180 9W-3361Special GroupPin and Bushing Group (48 Sections)(Contains Press Fit Master Pin) 1 246-1907

320S TRACKPRESS FIT MASTER LINKS

6KM8.00" (203.2 mm) PITCH – 20 mm BOLT

(PER MACHINE) QUANTITY GREASED PART NUMBERLink Assembly – 45 Section 2 213-1933Components of Link AssemblyTrack LinksRH Regular 45 6Y-1607LH Regular 45 6Y-1608Other ComponentsPin 44 6Y-0851Master Pin (Press Fit) 1 6Y-0850Bushing 44 321-1462


568

323DS, 320CS, 320BS, 320S320S TRACKPRESS FIT MASTER LINKS6KM8.00" (203.2 mm) PITCH – 20 mm BOLT(Cont'd.)(PER MACHINE) QUANTITY GREASED PART NUMBERMaster Bushing 1 201-0826Seal (Ploy W) 88 179-3425Seal - Master (Poly W) 2 179-3427Seal (Spring Washer) 180 –

Spacer 2 –

Track Hardware (2)

Bolt 180 306-2148Nut 180 9W-3361Special Group (2)

Pin and Bushing Group (48 Sections) 1 246-1907

323DS, 320CS, 320BS, 320S TRACK SHOES8.00" (203.2 mm) PITCH – 20 mm BOLT

TYPE WIDTH PART NUMBERTriple Grouser (Offset RH) 21.7" (550 mm) 126-5304Triple Grouser (Offset LH) 21.7" (550 mm) 126-5305

323DS, 320CS, 320BS, 320S SPROCKETS(PER SIDE) QUANTITY PART NUMBERSprocket Rim (21 Teeth) 1 6Y-4898Bolt 18 8T-6430Washer 18 8T-3282

323DS, 320CS, 320BS IDLERS5MS, BBL, SED

(PER MACHINE) QUANTITY PART NUMBERIdler Group 2 115-3696Components of GroupIdler Assembly 1 115-7471Bearing (3) 2 6Y-2272Shaft 1 112-9951Bearing Block 2 115-3697Pin 2 6Y-2266Seal – Duo-Cone Group 2 109-0885


569

323DS, 320CS, 320BS, 320S323DS, 320CS, 320BS IDLERS5MS, BBL, SED(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERToric Ring (4) 2 6Y-2270Seal – Shaft O-Ring 2 8F-8882Plug 1 7H-3171

320S IDLERS6KM


Components of GroupIdler Assembly 1 115-7471Bearing (4) 2 6Y-2272Shaft 1 112-9951Bearing Block 2 7I-7767Pin 2 6Y-2266Seal – Duo-Cone Group 2 109-0885Toric Ring (4) 2 6Y-2270Seal – Shaft O-Ring 2 8F-8882Plug 1 7H-3171

323DS, 320CS, 320BS, 320S CARRIER ROLLERS(PER MACHINE) QUANTITY PART NUMBERGroup 4 300-4545

Components of GroupRoller Shell Assembly 1 300-4544Bearing (5) 1 6Y-9855Bearing 1 6Y-9856Shaft 1 6Y-9858Retainer 1 6Y-8075Thrust Washer 1 300-4538Cover 1 6Y-8077Bolt 5 8T-1159Seal – Duo-Cone Group 2 179-1292Toric Ring (5) 2 1M-3097Seal – Shaft O-Ring 1 5H-8848Plug 1 7H-3171

4 Component of preceding assembly or group; quantity shown is quantity per assembly or group.5 Component of preceding assembly or group.

570

323DS, 320CS, 320BS, 320S323DS, 320CS, 320BS, 320S CARRIER ROLLERS (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERMounting Hardware (6)

Bolt 1 8T-5878

320CS, 320BS, 320S TRACK ROLLERS(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) 14 431-5267Mounting Hardware (7)


323DS TRACK ROLLERS HEAVY DUTY(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) 14 431-5566

Components of GroupRoller Shell (SF) 1 206-9257Mounting Hardware (7)


323DS, 320CS, 320BS, 320S CENTER GUIDING GUARDS(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 7Y-2581Bolt 8 7X-2563Washer 8 8T-4123Spacer 8 8V-1715

323DS TRACK ROLLER GUARDS (FULL LENGTH)(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 119-4554Guard Assembly 4 119-4553Bolt (M20) (Guard Assemblies to Frame) 24 8T-5460Washer 24 8T-5439Pipe 12 117-5612Bolt (M 20) 12 7X-2440Washer 24 8T-5439Support Assembly 12 186-5564

6 Not included in roller group; quantity shown is required to mount each roller.7 These components are not included in the roller group; quantities shown are required to mount each roller.

571

323DS, 320CS, 320BS, 320S323DS SPROCKET REAR GUARDS

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 119-4554Guard Assembly 2 119-4553Bolt (M20) (Guard Assemblies to Frame) 12 8T-5460Washer 12 8T-5439Pipe 6 117-5612Bolt (M 20) 6 7X-2440Washer 12 8T-5439Support Assembly 6 186-5564

572

324E, 324D, 322C, 322B, 322324E GREASED TRACKPRESS FIT MASTER LINKS

JCZ7.50" (190.5 mm) PITCH – 20 mm BOLT

QUANTITY GREASED PART NUMBERLink Assembly – 47 Section 2 337-9045Components of Link AssemblyTrack LinksRH Regular 47 335-9246LH Regular 47 335-9247Other ComponentsPin 46 340-8908Master Pin 1 340-8907Bushing 46 190-3523Master Bushing 1 190-3524Seal-(Poly-w) 92 158-4380Seal-Master(Poly-w) 2 158-4381Track Hardware (1)


324D, 322C/B, 322, 322N TRACKPRESS FIT MASTER LINKS

ADX, BFN, BLP, BNY, 3NR, 7WL, 8MR, CJX, AWN, ECH, JZR, MND, T2D, JCZ7.50" (190.5 mm) PITCH – 20 mm BOLT


Components of Link AssemblyTrack LinksRH Regular 47 335-9246LH Regular 47 335-9247Other ComponentsPin 46 340-8908Master Pin 1 340-8907Bushing 46 190-3523Master Bushing 1 190-3524Seal-(Poly-w) 92 158-4380Seal-Master(Poly-w) 2 158-4381Seal (Spring Washer) 188 –

1 Not part of link assembly; required to assemble track group.2 For use with Extreme Service and Double Grouser Track Shoes.3 Serviced Replaced by - 337-9045. (Press Fit Master Links)

573

324E, 324D, 322C, 322B, 322324D, 322C/B, 322, 322N TRACKPRESS FIT MASTER LINKSADX, BFN, BLP, BNY, 3NR, 7WL, 8MR, CJX, AWN, ECH, JZR, MND, T2D, JCZ7.50" (190.5 mm) PITCH – 20 mm BOLT(Cont'd.)

QUANTITY GREASED PART NUMBERSpacer 2 –

Cotter Pin 1 –Track Hardware (4)

Bolt 188 9W-3619Bolt (5) 188 6Y-0846Nut 188 9W-3361Special GroupPin and Bushing Group (50 Sections) 1 –


324EL GREASED TRACKPRESS FIT MASTER LINKSKTE, PNW, TLF, LDG

7.50" (190.5 mm) PITCH – 20 mm BOLTQUANTITY GREASED PART NUMBER

Link Assembly – 51 Section 2 337-9044Components of Link AssemblyTrack LinksRH Regular 51 335-9246LH Regular 51 335-9247Other ComponentsPin 50 340-8908Master Pin 1 340-8907Bushing 50 190-3523Master Bushing 1 190-3524Seal (Poly - W) 100 158-4380Seal - Master (Poly - W) 2 158-4381Track Hardware (4)

Bolt 204 9W-3619Bolt (5) 204 6Y-0846Nut 204 9W-3361Special Group (4)



574

324E, 324D, 322C, 322B, 322324DL, 322CL, 322BL, 322BLN, 322L, 322LN TRACK

BMX, BTE, BFX, BKM, BKJ, EMR, BFK, BPH, 1YS, 1ZS, 2ES, 4RM, 5CR, 8CL, 8NR, 9RL, BGR, M2H, DFP, SYM, T2D, LAB, JJG, BYE, EJC,HEK, TRH, TSN, BTK, BYE, JAT, LAB, PYT7.50" (190.5 mm) PITCH – 20 mm BOLT


Components of Link AssemblyTrack LinksRH Regular 51 335-9246LH Regular 51 335-9247Other ComponentsPin 50 340-8908Master Pin 1 340-8907Bushing 50 190-3523Master Bushing 1 190-3524Seal (Poly - W) 100 158-4380Seal - Master (Poly - W) 2 158-4381Seal (Spring Washer) 204 –

Spacer 2 –

Cotter Pin 1 –Track Hardware (7)

Bolt 204 9W-3619Bolt (8) 204 6Y-0846Nut 204 9W-3361Special Group (7)

Pin and Bushing Group (50 Sections) 1 –


324D FORESTRY MACHINE TRACKGREASE LUBRICATED/POSITIVE PIN RETENTION 2 (PPR2)

JLS, JKR8.00" (203.2 mm) PITCH - 20 mm BOLT

QUANTITY GREASED PART NUMBERLink Assembly – (51 Sections) 2 389-6862Components of Link AssemblyTrack LinksRH Regular 51 261-1011LH Regular 51 261-1012Other ComponentsPin 50 261-1013Master Pin (Press Fit) 1 261-1014Bushing 50 261-1015

6 Serviced Replaced by - 337-9044. Press Fit Master Links.7 Not part of link assembly; required to assemble track group.8 For use with Extreme Service and Double Grouser Track Shoes.

575

324E, 324D, 322C, 322B, 322324D FORESTRY MACHINE TRACKGREASE LUBRICATED/POSITIVE PIN RETENTION 2 (PPR2)JLS, JKR8.00" (203.2 mm) PITCH - 20 mm BOLT(Cont'd.)

QUANTITY GREASED PART NUMBERMaster Bushing 1 261-1016Seal (Rigid) 100 261-1021Seal - Master (Poly - W) 2 261-1022Thrust Ring 100 261-1017Thrust Ring - Master 2 261-1018Track Hardware (9)

Bolt 204 306-2148Nut 204 9W-3361

324D LGP FORESTRY MACHINE TRACKJGK

8.00" (203.2 mm) PITCH - 3/4" BOLT

QUANTITY GREASED PART NUMBERLink Assembly – (53 Sections) 2 431-2184Components of Link AssemblyTrack LinksRH Master 1 431-2182LH Master 1 431-2183RH Regular 52 431-2180LH Regular 52 431-2181Other ComponentsPin 52 198-1125Master Pin 1 265-5109Bushing 52 8E-7222Master Bushing 1 269-4027Seal Assembly 104 207-0544Seal Assembly - Master 2 269-7103Thrust Ring 104 152-8071Thrust Ring - Master 2 269-4004Track Hardware (9)

Bolt 212 6V-1792Nut 212 1S-1860


576

324E, 324D, 322C, 322B, 322322CL FORESTRY MACHINE TRACK

CAM, CBY, LAR, C3R8.00" (203.2 mm) PITCH - 20 mm BOLT

QUANTITY GREASED PART NUMBERLink Assembly – (48 Sections) 2 201-9117Components of Link AssemblyTrack LinksRH Master 1 115-1853LH Master 1 115-1854RH Regular 47 6Y-1607LH Regular 47 6Y-1608Other ComponentsPin 47 6Y-0851Master Pin (Slip Fit) 1 188-3065Bushing 47 321-1462Master Bushing 1 201-0826Seal (Poly W) 94 179-3425Seal - Master (Poly - W) 2 179-3427Cotter 1 095-7944Track Hardware (10)

Bolt 192 306-2148Nut 192 9W-3361

324E, 324D, 322C/B, 322 TRACK SHOES7.50" (190.5 mm) PITCH – 20 mm BOLT

TYPE WIDTH PART NUMBERSingle Grouser (Trapezoidal Opening, Clipped Grouser) 23.6" (600 mm) 106-0614Double Grouser (Trapezoidal Opening) 23.6" (600 mm) 106-0615Single Grouser (Moderate Service) 27.6" (700 mm) 224-9862 (11)

Double Grouser (Trapezoidal Opening) 27.6" (700 mm) 106-0616Triple Grouser (Center Punched Slots) 23.6" (600 mm) 6I-9453Triple Grouser (Center Punched Slots) 27.6" (700 mm) 6I-9454Triple Grouser (Center Punched Slots) 31.5" (800 mm) 9W-9351Triple Grouser (Center Punched Slots) 35.4" (900 mm) 9W-9352Triple Grouser (Heavy Duty, Center Punched Slots) 19.7" (500 mm) 121-0133Triple Grouser (Heavy Duty, Center Punched Slots) 23.6" (600 mm) 121-0134Triple Grouser (Heavy Duty) 25.6" (650 mm) 1Q-4772Triple Grouser (Heavy Duty, Center Punched Slots) 27.6" (700 mm) 121-0135Triple Grouser (Center Punched Slots) 31.1" (790 mm) 345-2210Triple Grouser (Heavy Duty, Center Punched Slots) 31.5" (800 mm) 161-6304Self-Cleaning 31.5" (800 mm) 8E-8835

10 Not part of link assembly; required to assemble track group.11 Shoe requires the use of 6Y-0846 track bolts.

577

324E, 324D, 322C, 322B, 322324D, 322C FORESTRY MACHINE TRACK SHOES

CAM, CBY, LAR, C3R, JLS, JKR8.00" (203.2 mm) PITCH - 20 mm BOLT

TYPE WIDTH PART NUMBERDouble Grouser 23.6" (600 mm) 8E-8812Double Grouser (Trapezoidal Opening) 23.6" (600 mm) 152-8628Double Grouser 27.5" (700 mm) 8E-8814Double Grouser (Trapezoidal Opening) 27.5" (700 mm) 3Q-6993Triple Grouser (Heavy Duty, Center Punched Slots) 31.5" (800 mm) 161-6305

324D FORESTRY MACHINE TRACK SHOESJGK

8.00" (203.2 mm) PITCH - 3/4" BOLT

TYPE WIDTH PART NUMBERTriple Grouser (Heavy Duty, Center Punched Slots) (Tri) (RH) 35.4" (900 mm) 300-6457Triple Grouser (Heavy Duty, Center Punched Slots) (Tri) (LH) 35.4" (900 mm) 300-6458

324D, 322C/B, 322 SPROCKETS(PER SIDE) QUANTITY PART NUMBERSprocket Rim (21 Teeth) 1 8E-9805Bolt 16 7X-2562

324D, 322C SPROCKETSCAM, CBY, LAR, C3R, JLS, JKR

(PER SIDE) QUANTITY PART NUMBERSprocket Rim (21 Teeth) 1 6Y-4898Bolt 18 8T-6430Washer (12) 18 8T-3282

324D, SPROCKET (JGK) USE WITH D6R LINKSUSE WITH FORESTRY MACHINE LINKS

JGKQUANTITY PART NUMBER

Sprocket Rim (21 Teeth) 1 200-4197Bolt 18 8T-6430

324D, 322C/B, 322 IDLERS(PER MACHINE) QUANTITY PART NUMBERIdler Group 2 115-6337Components of GroupIdler Assembly 1 115-4931

12 For 322C machines only.

578

324E, 324D, 322C, 322B, 322324D, 322C/B, 322 IDLERS (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERBearing (13) 2 6I-9587Shaft 1 6I-9597Bearing Block 2 115-6338Pin 2 9W-9455Seal – Duo-Cone Group 2 109-0885Toric Ring (13) 2 6Y-2270Seal – Shaft O-Ring 2 1H-5728Plug 1 7H-3171

324D, 322C IDLERSCAM, CBY, LAR, C3R, JGK, JLS, JKR


Components of GroupIdler Assembly 1 115-7471Bearing (13) 2 6Y-2272Shaft 1 112-9951Bearing Block 2 115-3697Pin 2 6Y-2266Seal – Duo-Cone Group 2 109-0885Toric Ring (13) 2 6Y-2270Seal – Shaft O-Ring 2 8F-8882Plug 1 7H-3171

322C IDLERSBPH

(PER MACHINE) QUANTITY PART NUMBERIdler Group 2 194-1130 (14)

Components of GroupIdler Assembly 1 115-4931Bearing (13) 2 6I-9587Shaft 1 6I-9597Bearing Block 2 194-1131Pin 2 9W-9455Seal – Duo-Cone Group 2 109-0885Toric Ring (13) 2 6Y-2270Seal – Shaft O-Ring 2 1H-5728Plug 1 7H-3171

13 Component of preceding assembly or group; quantity shown is quantity per assembly or group.14 Not serviced

579

324E, 324D, 322C, 322B, 322324D, 322C/B, 322 CARRIER ROLLERS

(PER MACHINE) QUANTITY PART NUMBERGroup 4 8E-5600Mounting Hardware (15)

Bolt 1 8T-5878

324D, 322C CARRIER ROLLERSCAM, CBY, LAR, C3R, JLS, JKR

(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) 4 431-5267Mounting Hardware (15)


324D CARRIER ROLLERSJGK

PER MACHINE QUANTITY PART NUMBERSingle Flange (SF) (Heavy Duty) 6 206-1264Components of GroupRoller Shell (SF) (Heavy Duty) 1 206-9257Shaft 1 206-9260End Collar 2 158-8086Pin 2 159-9526Seal – Duo-Cone Group 2 206-9212Toric Ring (16) 2 171-5713Seal – Shaft O-Ring 2 8F-6711Plug 1 9W-2146Mounting Hardware (17)


324D, 322C/B, 322 TRACK ROLLERS(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) – (18) 345-2957

Double Flange (DF) – (19) 345-2964Components of Group

15 Not included in roller group; quantity shown is required to mount each roller.16 Component of preceding assembly or group; quantity shown is quantity per assembly or group.17 These components are not included in the roller group; quantities shown are required to mount each roller.18 14 Single flange roller groups used on the following machines: ADX, BLP, BNY, HEK, CJX, AWN. 16 Single flange roller groups used on

the following machines: BMX, BTE, BKM, BKJ, EMR, BFK, BGR, DFP, SYM, T2D, LAB, JJG, BYE, EJC. 8 Single flange roller groups and 6double flange roller groups used on the following machine: BFN, ECH. 8 Single flange roller groups and 8 double flange roller groupsused on the following machine: BFX.

19 Used as required.

580

324E, 324D, 322C, 322B, 322324D, 322C/B, 322 TRACK ROLLERS (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERRoller Shell (SF) 1 6I-9398Roller Shell (DF) 1 130-9285Bearing (20) 2 6I-9399Shaft 1 163-7393End Collar 2 158-8086Retaining Ring 1 158-8096Pin 1 159-9526Seal – Duo-Cone Group 2 9W-2201Toric Ring (20) 2 6H-1309Seal – Shaft O-Ring 2 8F-6711Stopper 1 5G-2247Plug 1 6Y-0473Mounting Hardware (21)


324D TRACK ROLLERS HEAVY DUTYJLS 18 Single Flange Rollers Required JGK 20 Double Flange Rollers Required

(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) (Heavy Duty) – (22) 206-1264

Double Flange (DF) (Heavy Duty) – (23) 206-1263Components of GroupRoller Shell (SF) (Heavy Duty) 1 206-9257

Roller Shell (DF) (Heavy Duty) 1 206-1262Bearing 2 6Y-1782Shaft 1 206-9260End Collar 2 158-8086Pin 2 159-9526Seal – Duo-Cone Group 2 206-9212Toric Ring (20) 2 171-5713Seal – Shaft O-Ring 2 8F-6711Plug 1 9W-2146Mounting Hardware (21)


20 Component of preceding assembly or group; quantity shown is quantity per assembly or group.21 These components are not included in the roller group; quantities shown are required to mount each roller.22 18 required machine serial number JLS.23 20 required for machine serial number JGK.

581

324E, 324D, 322C, 322B, 322322C/B, 322 TRACK ROLLERS HEAVY DUTY

Standard on the BPH (16 Required) CAM, CBY (Use 325 Heavy Duty Single Flange 18 Required) Optional use for all other 322machines

(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) – (24) 197-4161Components of GroupRoller Shell (SF) 1 205-3594Bearing (25) 2 6I-9399Shaft 1 200-6432End Collar 2 158-8086Pin 2 159-9526Seal – Duo-Cone Group 2 206-9212Toric Ring (25) 2 171-5713Seal – Shaft O-Ring 2 8F-6711Plug 1 9W-2146Mounting Hardware (26)


324D, 324DL CENTER GUIDING GUARDS(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 260-2276Bolt 8 7X-2563Washer 8 8T-4123Spacer 8 8V-1715

322C CENTER GUIDING GUARDS(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 240-2988Bolt 8 7X-2563Washer 8 8T-4123Spacer 8 8V-1715

322B CENTER GUIDING GUARDS(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 117-5553Bolt 8 7X-2563Washer 8 8T-4123Spacer 8 8V-1715

24 Use as required25 Component of preceding assembly or group; quantity shown is quantity per assembly or group.26 These components are not included in the roller group; quantities shown are required to mount each roller.

582

324E, 324D, 322C, 322B, 322322 CENTER GUIDING GUARDS


324D TRACK ROLLER GUARDS (FULL LENGTH)(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 260-2277Bolt (M 20) 24 8T-5460Washer 24 8T-4123

324DL TRACK ROLLER GUARDS (FULL LENGTH)(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 260-2278Bolt (M 20) 32 8T-5460Washer 32 8T-4123

322C TRACK ROLLER GUARDS (FULL LENGTH)(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 226-5369Bolt (M 20) 32 8T-5460Washer 32 8T-4123

324D TRACK ROLLER GUARDS (SPROCKET)(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 260-2277Bolt (M 20) 12 8T-5460Washer 12 8T-4123

324DL TRACK ROLLER GUARDS (SPROCKET)(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 260-2278Bolt (M 20) 16 8T-5460Washer 16 8T-4123

583

324E, 324D, 322C, 322B, 322324D, 322C SHOE SUPPORT GUARDS

CAM, CBY, LAR, C3R, JLS, JKR

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 192-8458Guard Assembly 4 192-8459Bolt (M 20) 32 8T-6430Washer 32 8T-4123Pipe 16 192-8460Bolt (M 20) 16 7X-2440Washer 32 8T-4123Support Assembly (Nut) 16 226-5101

322CL SHOE SUPPORT GUARDSBPH

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 198-5596Guard Assembly 4 198-5597Bolt (M 20) 32 8T-6430Washer 32 8T-4123Pipe 16 219-8238Bolt (M 20) 16 222-3595Washer 32 8T-4123Nut 16 8T-4131

584

329E, 329D, 325D, 325C, 325B, 325329DL, 329DLN, 325DL, 325DLN TRACK

SLIP FIT MASTER LINKSLAL, NAC, JCL, GPB, T2S, PEH, PAL, AZP, DAP, SCR, MCL, PKE, C4F, LWR, RJK, MNB, DJF, TAY, RSK, J9D, J8D, TPM, LFW, BFC, JHJ,

SCY, LZF, DJF, L5G, LGN, WLT, XDB, YFW, EBM8.00" (203.2 mm) PITCH – 20 mm BOLT

QUANTITY GREASED PART NUMBERLink Assembly – 50 Section 2 236-8893Components of Link AssemblyTrack LinksRH Master 1 115-1853LH Master 1 115-1854RH Regular 49 6Y-1607LH Regular 49 6Y-1608Other ComponentsPin 49 6Y-0851Master Pin (Slip Fit) 1 188-3065Bushing 49 321-1462Master Bushing 1 201-0826Seal (Poly-W) 98 179-3425Seal-Master (Poly-W) 2 179-3427Cotter 1 095-7944Track Hardware (1)

Bolt (Grouser Shoe) 200 306-2148Bolt (Self-Cleaning Shoe) 100 6Y-5686Bolt (Self-Cleaning Shoe) 100 306-2148Nut 200 9W-3361Special GroupPin and Bushing Group (48 Sections)(Contains Press Fit Master Pin) 1 246-1907

329EL, 329ELN GREASED TRACKPRESS FIT MASTER LINKSPLW, RDX, TST, WJK, RLD


Link Assembly – 50 Section 2 341-1417Components of Link AssemblyTrack LinksRH Regular 50 6Y-1607LH Regular 50 6Y-1608Other ComponentsPin 49 6Y-0851Master Pin (Press Fit) 1 6Y-0850


585

329E, 329D, 325D, 325C, 325B, 325329EL, 329ELN GREASED TRACKPRESS FIT MASTER LINKSPLW, RDX, TST, WJK, RLD8.00" (203.2 mm) PITCH – 20 mm BOLT(Cont'd.)

QUANTITY GREASED PART NUMBERBushing 49 321-1462Master Bushing 1 201-0826Seal (Poly-W) 98 179-3425Seal-Master (Poly-W) 2 179-3427Track Hardware (2)

Bolt (Grouser Shoe) 200 306-2148Bolt (Grouser Shoe) 200 6Y-0846 (3)

Bolt (Self-Cleaning Shoe) 100 6Y-5686Bolt (Self-Cleaning Shoe) 100 306-2148Nut 200 9W-3361Special GroupPin and Bushing Group (48 Sections)(Contains Press Fit Master Pin) 1 246-1907

329D, 325D, 325C/B TRACKSLIP FIT MASTER LINKS

BKH, BKW, AMH, BLA 8GM, 8PR, KDG, CJM, ABD, DBH, BBF, WDK, BYS, DTZ8.00" (203.2 mm) PITCH – 20 mm BOLT

QUANTITY GREASED PART NUMBERLink Assembly – 45 Section 2 201-9116Components of Link AssemblyTrack LinksRH Master 1 115-1853LH Master 1 115-1854RH Regular 44 6Y-1607LH Regular 44 6Y-1608Other ComponentsPin 44 6Y-0851Master Pin (Slip Fit) 1 188-3065Bushing 44 321-1462Master Bushing 1 201-0826Seal (Poly-W) 88 179-3425Seal-Master (Poly-W) 2 179-3427Seal (Spring Washer) 180 –

Spacer 2 –

Cotter 1 095-7944

2 Not part of link assembly; required to assemble track group.3 For use with 126-5064 & 126-5065 Shoes

586

329E, 329D, 325D, 325C, 325B, 325329D, 325D, 325C/B TRACKSLIP FIT MASTER LINKSBKH, BKW, AMH, BLA 8GM, 8PR, KDG, CJM, ABD, DBH, BBF, WDK, BYS, DTZ8.00" (203.2 mm) PITCH – 20 mm BOLT(Cont'd.)

QUANTITY GREASED PART NUMBERTrack Hardware (4)

Bolt (Grouser Shoe) 180 306-2148Bolt (Self-Cleaning Shoe) 90 6Y-5686Bolt (Self-Cleaning Shoe) 90 306-2148Nut 180 9W-3361Special GroupPin and Bushing Group (48 Sections)(Contains Press Fit Master Pin) 1 246-1907

325CL, 325BL, 325BLN TRACKSLIP FIT MASTER LINKS

BLX, G1L, S2C, CSJ, DTF, JLD, JLC, BKT, BMM, BTD, BFE, CRB, 1GS, 2JR, 4DS, 5BS, 6DN, 7EN, 8FN, 8RR, 5LW8.00" (203.2 mm) PITCH – 20 mm BOLT

QUANTITY GREASED PART NUMBERLink Assembly – 48 Section 2 201-9117Components of Link AssemblyTrack LinksRH Master 1 115-1853LH Master 1 115-1854RH Regular 47 6Y-1607LH Regular 47 6Y-1608Other ComponentsPin 47 6Y-0851Master Pin (Slip Fit) 1 188-3065Bushing 47 321-1462Master Bushing 1 201-0826Seal (Poly-W) 94 179-3425Seal-Master (Poly-W) 2 179-3427Seal (Spring Washer) 192 –

Spacer 2 –


Bolt (Grouser Shoe) 192 306-2148Bolt (Self-Cleaning Shoe) 96 6Y-5686Bolt (Self-Cleaning Shoe) 96 306-2148Nut 192 9W-3361


587

329E, 329D, 325D, 325C, 325B, 325325CL, 325BL, 325BLN TRACKSLIP FIT MASTER LINKSBLX, G1L, S2C, CSJ, DTF, JLD, JLC, BKT, BMM, BTD, BFE, CRB, 1GS, 2JR, 4DS, 5BS, 6DN, 7EN, 8FN, 8RR, 5LW8.00" (203.2 mm) PITCH – 20 mm BOLT(Cont'd.)

QUANTITY GREASED PART NUMBERSpecial GroupPin and Bushing Group (48 Sections)(Contains Press Fit Master Pin)

1 246-1907

329E, 325 TRACKPRESS FIT MASTER LINKS

5WK, 6RM, 7TG, 8JG, 8NL, 8YK, 9SG, 9ZR, PTY8.00" (203.2 mm) PITCH – 20 mm BOLT

QUANTITY GREASED PART NUMBERLink Assembly – 45 Section 2 213-1933Components of Link AssemblyTrack LinksRH Regular 45 6Y-1607LH Regular 45 6Y-1608Other ComponentsPin 44 6Y-0851Master Pin (Press Fit) 1 6Y-0852Bushing 44 321-1462Master Bushing 1 201-0826Seal (Poly-W) 88 179-3425Seal-Master (Poly-W) 2 179-3427Seal (Spring Washer) 180 –

Spacer 2 –

Track Hardware (5)

Bolt (Grouser Shoe) 180 306-2148Bolt (Self-Cleaning Shoe) 90 6Y-5686Bolt (Self-Cleaning Shoe) 90 306-2148Nut 180 9W-3361Special Group (5)



588

329E, 329D, 325D, 325C, 325B, 325325L, 325N, 325LN TRACK

PRESS FIT MASTER LINKS2JK, 2SK, 2SL, 3LL, 6KK, 7CJ, 7LJ, 7LM, 8NK, 9KL


Link Assembly – 48 Section 2 213-1932Components of Link AssemblyTrack LinksRH Regular 48 6Y-1607LH Regular 48 6Y-1608Other ComponentsPin 47 6Y-0851Master Pin (Press Fit) 1 6Y-0850Bushing 47 321-1462Master Bushing 1 201-0826Seal (Poly-W) 94 179-3425Seal-Master (Poly-W) 2 179-3427Seal (Spring Washer) 192 –

Spacer 2 –

Track Hardware (6)

Bolt (Grouser Shoe) 192 306-2148Bolt (Self-Cleaning Shoe) 96 6Y-5686Bolt (Self-Cleaning Shoe) 96 306-2148Nut 192 9W-3361Special Group (6)


325DL FORESTRY MACHINE TRACKC7K, C9M, C8L

8.00" (203.2 mm) PITCH - 3/4" BOLT

QUANTITY GREASED PART NUMBERLink Assembly – (51 Sections) 2 431-2186Components of Link AssemblyTrack LinksRH Master 1 431-2182LH Master 1 431-2183RH Regular 50 431-2180LH Regular 50 431-2181Other ComponentsPin 50 198-1125Master Pin 1 265-5109Bushing 50 8E-7222


589

329E, 329D, 325D, 325C, 325B, 325325DL FORESTRY MACHINE TRACKC7K, C9M, C8L8.00" (203.2 mm) PITCH - 3/4" BOLT(Cont'd.)

QUANTITY GREASED PART NUMBERBushing Master 1 269-4027Seal Assembly (Rigid) 100 207-0544Master Seals 2 269-7103Thrust Ring 100 152-8071Thrust Ring Master 2 269-4004Track Hardware (7)

Bolt 204 6V-1792Nut 204 1S-1860

325CL FORESTRY MACHINE TRACKM2K, S3M, Y4P

8.00" (203.2 mm) PITCH - 3/4" BOLT

QUANTITY GREASED PART NUMBERLink Assembly – (49 Sections) 2 431-2185Components of Link AssemblyTrack LinksRH Master 1 431-2182LH Master 1 431-2183Master Pin 1 265-5109RH Regular 48 431-2180LH Regular 48 431-2181Other ComponentsPin 48 198-1125Bushing 48 8E-7222Seal Assembly (Rigid) 96 207-0544Thrust Ring 96 152-8071Thrust Ring Master 2 269-4004Bushing Master 1 269-4027Master Seals 2 269-7103Track Hardware (7)

Bolt 196 6V-1792Nut 196 1S-1860

329D, 325D, 325C, 325B, 325 TRACK SHOES8.00" (203.2 mm) PITCH – 20 mm BOLT

TYPE WIDTH PART NUMBERSingle Grouser (Trapezoidal Opening, Clipped Grouser) 23.6" (600 mm) 6I-9854Single Grouser (Trapezoidal Opening, Clipped Grouser) 27.6" (700 mm) 1Q-4752


590

329E, 329D, 325D, 325C, 325B, 325329D, 325D, 325C, 325B, 325 TRACK SHOES8.00" (203.2 mm) PITCH – 20 mm BOLT(Cont'd.)TYPE WIDTH PART NUMBERDouble Grouser 23.6" (600 mm) 8E-8812Double Grouser 27.6" (700 mm) 8E-8814Double Grouser (Trapezoidal Opening) 27.6" (700 mm) 3Q-6993Triple Grouser (Center Punched Slots) 23.6" (600 mm) 126-5064 (8)

Triple Grouser (Center Punched Slots) 27.6" (700 mm) 126-5065 (8)

Triple Grouser (Center Punched Slots) 31.5" (800 mm) 6Y-2126Triple Grouser (Center Punched Slots) 35.4" (900 mm) 6I-8651Triple Grouser (Heavy Duty, Center Punched Slots) 23.6" (600 mm) 121-0137Triple Grouser (Heavy Duty, Center Punched Slots) 27.6" (700 mm) 121-0138Triple Grouser (Heavy Duty, Center Punched Slots) 31.5" (800 mm) 161-6305Self-Cleaning 35.4" (900 mm) 6Y-5662

325D, 325C FORESTRY MACHINE TRACK SHOES8.00" (203.2 mm) PITCH - 3/4" BOLT



Single Grouser (Trapezoidal Opening, Clipped Grouser) 24" (610 mm) 207-5897 207-5898Single Grouser (Trapezoidal Opening, Clipped Grouser) 28" (710 mm) 207-5283 207-5284Double Grouser 27.5" (700 mm) 209-4535 209-4536Triple Grouser 27.5" (700 mm) 209-4539 209-4540

329D, 325D, 325C, 325B, 325 SPROCKETS(PER SIDE) QUANTITY PART NUMBERSprocket Rim (21 Teeth) 1 6Y-4898Bolt 18 8T-6430Washer 18 8T-3282

325D, 325C FORESTRY MACHINE SPROCKETSM2K, S3M, Y4P, C7K, C9M, C8L

(PER SIDE) QUANTITY PART NUMBERSprocket Rim (21 Tooth) 1 200-4197Bolt 18 8T-6430Washer 18 8T-3282

8 Requires 6Y-0846 Bolts

591

329E, 329D, 325D, 325C, 325B, 325329D, 325D, 325C, 325B IDLERS


Components of GroupIdler Assembly (540 mm Tread Diameter) 1 115-7471Bearing (9) 2 6Y-2272Shaft 1 112-9951Bearing Block 2 115-3697Pin 2 6Y-2266Seal – Duo-Cone Group 2 109-0885Toric Ring (9) 2 6Y-2270Seal – Shaft O-Ring 2 8F-8882Plug 1 7H-3171

325D IDLERSC4F, LWR, RJK


Components of GroupIdler Assembly (552 mm Tread Diameter) 1 235-8531Bearing (9) 2 6Y-2272Shaft 1 112-9951Bearing Block 2 115-3697Pin 2 6Y-2266Seal – Duo-Cone Group 2 109-0885Toric Ring (9) 2 6Y-2270Seal – Shaft O-Ring 2 8F-8882Plug 1 7H-3171

329D, 325D, 325C, 325B, 325 CARRIER ROLLERS(PER MACHINE) QUANTITY PART NUMBERGroup 4 300-4545

Components of GroupRoller Shell Assembly 1 300-4544Bearing (10) 1 6Y-9855Bearing (10) 1 6Y-9856Shaft 1 6Y-9858Retainer 1 6Y-8075Thrust Washer 1 300-4538Cover 1 6Y-8077


592

329E, 329D, 325D, 325C, 325B, 325329D, 325D, 325C, 325B, 325 CARRIER ROLLERS (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERBolt 5 8T-1159Seal – Duo-Cone Group 2 179-1292Toric Ring (11) 2 1M-3097Seal – Shaft O-Ring 1 5H-8848Plug 1 7H-3171Mounting Hardware (12)

Bolt 1 8T-5878

329D, 325D, 325C, 325B, 325 TRACK ROLLERS(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) – (13) 431-5267



325D, 325C, 325B, 325 TRACK ROLLERS HEAVY DUTYStandard on the M2K, S3M, Y4P, DTF, JLD, G1L, S2C, C4F, LWR, RJK, C7K, MCL, C9M, C8L (18 Required Single Flange)

Optional use for other 325 machines


Double Flange (DF) (Heavy Duty) – (14) 206-1263Components of GroupRoller Shell (SF) (Heavy Duty) 1 206-9257Roller Shell (DF) (Heavy Duty) 1 206-1262Bearing 2 6Y-1782Shaft 1 206-9260End Collar 2 158-8086Pin 2 159-9526Seal – Duo-Cone Group 2 206-9212Toric Ring (16) 2 171-5713Seal – Shaft O-Ring 2 8F-6711

11 Component of preceding assembly or group.12 Not included in roller group; quantity shown is required to mount each roller.13 325B, 325 machines use 14 single flange roller group. 325BL, 325L machines use 16 single flange roller groups. 329D, 325D, 325C (14) and

329DL, 325DL, 325CL (18) machines use the following roller configurations. 14 Single flange roller groups used on : BKN, AMH, BKW,KDG, CJM, BBF, WDK, BYS. 18 Single flange roller groups used on: CSJ, JLC, BKT, BMM, BTD, BFE, CRB, LAL, NAC, CYW, GPB, T2S,PAL, AZP, DAP, SCR, PKE, MND, DJF, TAY, RSK, TPM, BFC, J8D, J9D, JHJ, SCY. 8 Single flange roller groups and 6 double flange rollergroups are used on BLA. 10 Single flange roller groups and 8 double flange roller groups are used on BLX, PEH, LFW.

14 Use as required.15 These components are not included in the roller group; quantities shown are required to mount each roller.16 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

593

329E, 329D, 325D, 325C, 325B, 325325D, 325C, 325B, 325 TRACK ROLLERS HEAVY DUTYStandard on the M2K, S3M, Y4P, DTF, JLD, G1L, S2C, C4F, LWR, RJK, C7K, MCL, C9M, C8L (18 Required Single Flange) Optional use forother 325 machines(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERPlug 1 9W-2146Mounting Hardware (17)

Bolt 4 7X-2565Washer 4 8T-4123Special Application Arctic Roller GroupSingle Flange (SF) – (18) 207-8167Seal - Duo-Cone Group 2 3P-1848Toric Ring (19) 2 3P-1847Seal 2 8M-4390

329D, 325D, 325C, 325B, 325 CENTER GUIDING GUARDS(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 7Y-2581Bolt 8 7X-2563Washer 8 8T-4123Spacer 8 8V-1715

329D, 325D, 325C TRACK ROLLER GUARDS (FULL LENGTH)(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 119-4554Guard Assembly 4 119-4553Bolt (M 20) 24 8T-5460Washer 24 8T-5439Pipe 12 117-5612Bolt (M 20) 12 7X-2440Washer 24 8T-5439Support Assembly (Nut) 12 186-5564

329DL, 325DL TRACK ROLLER GUARDS (FULL LENGTH)(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 235-7774Guard Assembly 4 235-7775Bolt (M 20) 32 8T-5460Washer 32 8T-5439

17 These components are not included in the roller group; quantities shown are required to mount each roller.18 Use as required.19 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

594

329E, 329D, 325D, 325C, 325B, 325329DL, 325DL TRACK ROLLER GUARDS (FULL LENGTH) (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERPipe 16 117-5612Bolt (M 20) 16 7X-2440Washer 32 8T-5439Support Assembly (Nut) 16 186-5564

325CL TRACK ROLLER GUARDS (FULL LENGTH)(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 186-5499Guard Assembly 4 186-5500Bolt (M 20) 32 8T-5460Washer 32 8T-5439Pipe 16 117-5612Bolt (M 20) 16 7X-2440Washer 32 8T-5439Support Assembly (Nut) 16 186-5564

329D, 325D TRACK ROLLER GUARDS (SPROCKET)(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 119-4554Guard Assembly 2 119-4553Bolt (M 20) 12 8T-5460Washer 12 8T-5439Pipe 6 117-5612Bolt (M 20) 6 7X-2440Washer 12 8T-5439Support Assembly (Nut) 6 186-5564

329DL, 325DL TRACK ROLLER GUARDS (SPROCKET)(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 235-7774Guard Assembly 2 235-7775Bolt (M 20) 16 8T-5460Washer 16 8T-5439Pipe 8 117-5612Bolt (M 20) 8 7X-2440Washer 16 8T-5439Support Assembly (Nut) 8 186-5564

595

329E, 329D, 325D, 325C, 325B, 325325D SHOE SUPPORT GUARDS

FOR MACHINE SERIAL NUMBERS C9M, C8L, C7K

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 264-1671Guard Assembly 4 264-1672Bolt (M 20) 32 8T-6430Washer 32 8T-4123Pipe 16 192-8460Bolt (M 20) 16 7X-2440Washer 32 8T-4123Support Assembly (Nut) 16 273-6910

325C SHOE SUPPORT GUARDS(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 192-8458Guard Assembly 4 192-8459Bolt (M 20) 32 8T-6430Washer 32 8T-4123Pipe 16 192-8460Bolt (M 20) 16 7X-2440Washer 32 8T-4123Support Assembly (Nut) 16 226-5101

325CL SHOE SUPPORT GUARDS(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 260-2441Guard Assembly 4 260-2442Bolt (M 20) 32 8T-6430Washer 32 8T-4123Pipe 16 192-8460Bolt (M 20) 16 7X-2440Washer 32 8T-4123Support Assembly (Nut) 16 8T-4131

596

336E, 336D, 330D, 330C, 330B, 330, 328D336D, 330D, 330C/B TRACK

SLIP FIT MASTER LINKSBTM, GAG, JAB, MCA, 4YW, 5EZ, 8SR, 9HN, KAB, PCK, MEY, EAH, KKT, JER, EMX, JBT


Link Assembly – 45 Section 2 201-9118Components of Link AssemblyTrack LinksRH Master 1 118-7302LH Master 1 118-7303RH Regular 44 6Y-2589LH Regular 44 6Y-2590Other ComponentsPin 44 6Y-2751Master Pin (Slip Fit) 1 188-3066Bushing 44 321-1463Master Bushing 1 201-0828Seal (Poly-W) 88 179-3426Seal-Master (Poly-W) 2 179-3428Seal (Spring Washer) 180 –

Spacer 2 –


Bolt 180 318-2559Bolt (Use with Heavy Duty Shoes) 180 318-2558Nut 180 311-8150Special GroupPin and Bushing Group (49 Sections)(Contains Press Fit Master Pin) 1 246-1908

336DL, 336DLN, 330DL, 330DLN, 330CL, 330BL, 330BLN, 328DL TRACKSLIP FIT MASTER LINKS

KDD, RBH, CYA, B3M, CGZ, JCD, JNK, HAA, GKX, DKY, CAP, 1JS, 2RR, 3YR, 4RS, 5LR, 5LS, 6DR, 8TR, 3ZZ, FFK, GKX, EDX, HAS, B6H,MWP, T2Y, JLP, FFK, NBD, THJ, GBC, RAS, ERN, RDA, LDR, GGE, C5K, LEM, PEL, LRM, GTN, MKR, PRF, MPL, NLS, SKE, WET, DTS,

KDJ, MYP, JBF, W3K, D3P, JZZF, M4T, J6D, MAG, NEF, R2D, RDK, MPL, PPN, WRK, ZML, MYG8.50" (215.9 mm) PITCH – 22 mm BOLT

QUANTITY GREASED PART NUMBERLink Assembly – 49 Section 2 201-9119Components of Link AssemblyTrack LinksRH Master 1 118-7302LH Master 1 118-7303RH Regular 48 6Y-2589LH Regular 48 6Y-2590


597

336E, 336D, 330D, 330C, 330B, 330, 328D336DL, 336DLN, 330DL, 330DLN, 330CL, 330BL, 330BLN, 328DL TRACKSLIP FIT MASTER LINKSKDD, RBH, CYA, B3M, CGZ, JCD, JNK, HAA, GKX, DKY, CAP, 1JS, 2RR, 3YR, 4RS, 5LR, 5LS, 6DR, 8TR, 3ZZ, FFK, GKX, EDX, HAS, B6H,MWP, T2Y, JLP, FFK, NBD, THJ, GBC, RAS, ERN, RDA, LDR, GGE, C5K, LEM, PEL, LRM, GTN, MKR, PRF, MPL, NLS, SKE, WET, DTS,KDJ, MYP, JBF, W3K, D3P, JZZF, M4T, J6D, MAG, NEF, R2D, RDK, MPL, PPN, WRK, ZML, MYG8.50" (215.9 mm) PITCH – 22 mm BOLT(Cont'd.)

QUANTITY GREASED PART NUMBEROther ComponentsPin 48 6Y-2751Master Pin (Slip Fit) 1 188-3066Bushing 48 321-1463Master Bushing 1 201-0828Seal (Poly-W) 96 179-3426Seal-Master (Poly-W) 2 179-3428Seal (Spring Washer) 196 –

Spacer 2 –


Bolt 196 318-2559Bolt (Use with Heavy Duty Shoes) 196 318-2558Nut 196 311-8150Special GroupPin and Bushing Group (49 Sections)(Contains Press Fit Master Pin) 1 246-1908

330B/C/D & 336D/E GENERAL DUTY LINK ASSEMBLIES8.50" (215.9 mm) PITCH – 22 mm BOLT

(PER MACHINE) QUANTITY 45 SECTION 49 SECTIONLink Assembly 2 454-5843 449-2682Utilizes standard GLT UC components for repair parts. Reference the UC PSK PECP3003 for more information.

330B/C/D & 336D/E TRACK GROUPS (45 SECTIONS)LINK ASSEMBLY USED 454-5843 WIDTH QUANTITY PART NUMBERTriple Grouser (center punched slots) Shoe 23.6” (600 mm) 2 454-5844

330B/C/D & 336D/E TRACK GROUPS (49 SECTIONS)LINK ASSEMBLY USED 449-2682 WIDTH QUANTITY PART NUMBERTriple Grouser (center punched slots) 23.6” (600 mm) 2 449-2683Triple Grouser (center punched slots) 33.6” (850 mm) 2 454-5842


598

336E, 336D, 330D, 330C, 330B, 330, 328D336E, 330 TRACKPRESS FIT MASTER LINKS

2ZM, 6ZK, 8RL, 9NG, 9PJ, 9WJ, CMR, KED8.50" (215.9 mm) PITCH – 22 mm BOLT

QUANTITY GREASED PART NUMBERLink Assembly – 45 Section 2 213-1972Components of Link AssemblyTrack LinksRH Regular 45 6Y-2589LH Regular 45 6Y-2590Other ComponentsPin 44 6Y-2751Master Pin (Press Fit) 1 6Y-2748Bushing 44 321-1463Master Bushing 1 201-0828Seal (Poly-W) 88 179-3426Seal-Master (Poly-W) 2 179-3428Seal (Spring Washer) 180 –

Spacer 2 –

Track Hardware (3)

Bolt 180 318-2559Bolt (Use with Heavy Duty Shoes) 180 318-2558Nut 180 311-8150Special GroupPin and Bushing Group (49 Sections) 1 246-1908

336EL, 336ELN, 336DL, 336DLN, 330L, 330LN TRACKPRESS FIT MASTER LINKS

2EL, 5YM, 6SK, 6WJ, 8CK, 8FK, 9ML, JWR, LMG, MDS, PTB, BZY, GTJ, TEG, YEP8.50" (215.9 mm) PITCH – 22 mm BOLT

QUANTITY GREASED PART NUMBERLink Assembly – 49 Section 2 213-1971Components of Link AssemblyTrack LinksRH Regular 49 6Y-2589LH Regular 49 6Y-2590Other ComponentsPin 48 6Y-2751Master Pin (Press Fit) 1 6Y-2748Bushing 48 321-1463Master Bushing 1 201-0828Seal (Poly W) 96 179-3426Seal - Master (Poly W) 2 179-3428


599

336E, 336D, 330D, 330C, 330B, 330, 328D336EL, 336ELN, 336DL, 336DLN, 330L, 330LN TRACKPRESS FIT MASTER LINKS2EL, 5YM, 6SK, 6WJ, 8CK, 8FK, 9ML, JWR, LMG, MDS, PTB, BZY, GTJ, TEG, YEP8.50" (215.9 mm) PITCH – 22 mm BOLT(Cont'd.)

QUANTITY GREASED PART NUMBERSeal (Spring Washer) 196 -

Spacer 2 -

Track Hardware (4)

Bolt 196 318-2559Bolt (Use with Heavy Duty Shoes) 196 318-2558Nut 196 311-8150Special GroupPin and Bushing Group (49 Sections) 1 246-1908

330D, 330CL FORESTRY MACHINE TRACKL2K, E4K, H3K, B2L, B4N, B1K

8.50" (215.9 mm) PITCH - 24 mm BOLT


Track LinksRH Regular 49 305-9363LH Regular 49 305-9364Components of Link AssemblyOther ComponentsPin 48 8E-4272Master Pin 1 253-2740Bushing 48 227-3029Master Bushing 1 251-8368Thrust Ring 96 3P-0623Thrust Ring - Master 2 251-8364Seal Assembly 96 250-3998Seal Assembly - Master 2 251-7757Stopper 1 7G-4332Plug 1 6Y-0473Track Hardware (6)

Bolt 196 301-2299Nut 196 150-4742

4 Not part of link assembly; required to assemble track group.5 For 52 section link assembly order 301-2287.6 Not part of link assembly; required to assemble track group

600

336E, 336D, 330D, 330C, 330B, 330, 328D336D, 330D, 330C, 330B, 330, 328D TRACK SHOES

8.50" (215.9 mm) PITCH – 22 mm BOLT

TYPE WIDTH PART NUMBERSingle Grouser (Clipped Grouser, Trapezoidal Opening) 23.6" (600 mm) 331-3631Single Grouser (Clipped Grouser) 27.6" (700 mm) 331-3632Single Grouser (Clipped Grouser, Trapezoidal Opening) 27.6" (700 mm) 331-3633Double Grouser 23.6" (600 mm) 6I-8454Double Grouser 27.6" (700 mm) 6I-8455Double Grouser (Trapezoidal Opening) 27.6" (700 mm) 3Q-6992Triple Grouser (Center Punched Slots) 23.6" (600 mm) 126-5066Triple Grouser (Center Punched Slots) 27.6" (700 mm) 238-8591Triple Grouser (Center Punched Slots) 29.5" (750 mm) 126-5067Triple Grouser (Center Punched Slots) 31.5" (800 mm) 238-8592Triple Grouser (Center Punched Slots) 33.5" (850 mm) 6Y-8180Triple Grouser (Heavy Duty, Center Punched Slots) 23.6" (600 mm) 121-0140Triple Grouser (Heavy Duty, Center Punched Slots) 29.5" (750 mm) 121-0141Triple Grouser (Heavy Duty, Center Punched Slots) 33.5" (850 mm) 139-0246Self-Cleaning 33.5" (850 mm) 5Q-3252

330B/C/D & 336D/E GENERAL DUTY SHOESTrack Groups have shoes that are not serviced, Triple Grouser (center punched slots). Shoes are available for useon link assemblies. Refer to the table above for more information on offerings and hardware.

330D, 330CL FORESTRY MACHINE TRACK SHOESB2L, B4N, B1K, L2K, E4K, H3K

8.50" (215.9 mm) PITCH – 24 mm BOLT

TYPE WIDTH PART NUMBERDouble Grouser (Trapezoidal Opening) 27.6" (700 mm) 215-2991Triple Grouser (Heavy Duty Center Punched Slots) 33.5" (850 mm) 215-2986

336D, 330D, 330C, 330B, 330, 328D SPROCKETS(PER SIDE) QUANTITY PART NUMBERSprocket Rim (23 Teeth) 1 6Y-5685Bolt 16 7X-2575

330D, 330CL FORESTRY MACHINE SPROCKETSB2L, B4N, B1K, L2K, E4K, H3K

(PER SIDE) QUANTITY PART NUMBERSprocket Rim (23 Teeth) 1 211-9843Bolt 16 7X-2575

601

336E, 336D, 330D, 330C, 330B, 330, 328D336D, 330D, 330C, 330B, 330, 328D IDLERS

(PER MACHINE) QUANTITY FORMER PART NUMBER PART NUMBERIdler Group 2 102-8152 (7) 136-2422

Components of GroupIdler Assembly (635 mm Tread Diameter) 1 136-3847 136-3847Bearing (8) 2 6Y-8023 6Y-8023Shaft 1 6Y-8028 6Y-8028Bearing Block 2 7Y-1248 115-3699Pin 2 6Y-8029 6Y-8029Seal – Duo-Cone Group 2 109-0881 109-0881Toric Ring (8) 2 5P-9120 5P-9120Seal – Shaft O-Ring 2 1H-7339 1H-7339Plug 1 7H-3171 7H-3171

330B/C/D & 336D/E GENERAL DUTY IDLERS(PER MACHINE) QUANTITY PART NUMBERTriple Grouser (center punched slots) Shoe 2 449-2293

330D, 330CL FORESTRY MACHINE IDLERSB2L, B4N, B1K, L2K, E4K, H3K

(PER MACHINE) QUANTITY PART NUMBERIdler Group 2 248-7151Components of GroupIdler Assembly (635 mm Tread Diameter) 1 264-9821Bearing (9) 2 124-9979Shaft 1 124-9978Bearing Block 2 115-6370Pin 2 094-3709Seal – Duo-Cone Group 2 109-0868Toric Ring (9) 2 6Y-8134Shaft O-Ring 2 2H-3934Plug 1 7H-3171

330D IDLERSFOR MACHINE SERIAL NUMBERS C5K, LEM, PEL


Components of Group

7 Use on model 330 only.8 Component of preceding assembly or group; quantity shown is quantity per assembly or group.9 Component of preceding assembly or group; quantity shown is quantity per assembly or group

602

336E, 336D, 330D, 330C, 330B, 330, 328D330D IDLERSFOR MACHINE SERIAL NUMBERS C5K, LEM, PEL(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERIdler Assembly (647 mm Tread Diameter) 1 235-8536Bearing (10) 2 6Y-8023Shaft 1 6Y-8028Bearing Block 2 115-3699Pin 2 6Y-8029Seal – Duo-Cone Group 2 109-0881Toric Ring (10) 2 5P-9120Seal – Shaft O-Ring 2 1H-7339Plug 1 7H-3171

336D, 330D, 330C, 330B, 330, 328D CARRIER ROLLERS(PER MACHINE) QUANTITY PART NUMBERGroup 4 300-4545

Components of GroupRoller Shell Assembly 1 300-4544Bearing (11) 1 6Y-9855Bearing (11) 1 6Y-9856Shaft 1 6Y-9858Retainer 1 6Y-8075Thrust Washer 1 300-4538Cover 1 6Y-8077Bolt 5 8T-1159Seal – Duo-Cone Group 2 179-1292Toric Ring (11) 2 1M-3097Seal – Shaft O-Ring 1 5H-8848Plug 1 7H-3171Mounting Hardware (12)

Bolt 1 7X-2577

330B/C/D & 336D/E GENERAL DUTY IDLERS(PER MACHINE) QUANTITY PART NUMBERCarrier Roller 4 449-2274

10 Component of preceding assembly or group; quantity shown is quantity per assembly or group.11 Component of preceding assembly or group.12 Not included in roller group; quantity shown is required to mount each roller.

603

336E, 336D, 330D, 330C, 330B, 330, 328D330D CARRIER ROLLERS

FOR MACHINE SERIAL NUMBERS PEL, L2K, E4K, H3K, ERN, THJ


Components of GroupRoller Shell (SF) 1 179-1488Shaft 1 183-2883End Collar 2 179-1497Pin 2 179-1499Seal – Duo-Cone Group 2 148-3533Toric Ring (13) 2 160-6631Seal – Shaft O-Ring 2 8F-8882Plug 1 9W-2146Mounting Hardware (14)


336D, 330D, 330C, 330B, 330 TRACK ROLLERS(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) – (15) 183-2874

Double Flange (DF) – (16) 183-2879Components of GroupRoller Shell (SF) 1 179-1488Roller Shell (DF) 1 179-1492Bearing (13) 2 6Y-2792Shaft 1 183-2883End Collar 2 179-1497Retaining Ring 1 –

Pin 2 179-1499Pin 1 –Seal – Duo-Cone Group 2 148-3533Toric Ring (13) 2 160-6631Seal – Shaft O-Ring 2 8F-8882Plug 1 9W-2146Stopper 1 –

13 Component of preceding assembly or group; quantity shown is quantity per assembly or group.14 These components are not included in the roller group; quantities shown are required to mount each roller.15 330B, 330 machines use 14 single flange roller groups. 330BL, 330L machines use 16 single flange roller groups. 330D, 330C and 330DL,

330CL machines use the following roller configurations. 14 single flange roller groups used on : GAG, JAB, MCA, KAB, MEY. 18 Singleflange roller groups used on: KDD, CYA, CGZ, JNK, HAA, GKX, DKY, CAP, GBC, RAS, LDR, LRM, GGE, EDX, HAS, B6H, T2Y, JLP, NBD. 8 Sin-gle flange roller groups and 6 double flange roller groups used on BTM, PCK. 10 Single flange roller groups and 8 double flange rollergroups used on RBH, RDA. 336D machines using 14 single flange roller groups: KKT, JBT, JER. 336D machine using 8 single flange rollergroups and 6 double flange roller groups: EMX. 336DL machines using 18 single flange roller groups: PRF, MPL, NLS, WET, KDJ, MYP,J6D. 336DL machine using 10 single flange roller groups and 8 double flange roller groups: SKE.

16 Use as required.

604

336E, 336D, 330D, 330C, 330B, 330, 328D336D, 330D, 330C, 330B, 330 TRACK ROLLERS (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERPlug 1 –



330B/C/D & 336D/E GENERAL DUTY IDLERSWith End Caps

QUANTITY PERMACHINE PART NUMBER

Single Flange Roller* 14 449-2284Roller Hardware** QUANTITY PER

ROLLERBolt – M24 4 7X-2454Washer 4 8T-4167

* 16 - SF rollers for L series machines. Some 336L machines require 18 SF Rollers.** These components are not included in the roller group; quantities shown are required to mount each roller.

336D, 330D, 330C, 330B, 330, 328D TRACK ROLLERS HEAVY DUTYStandard on the B3M, JCD, ERN, MWP, THJ, C5K, LEM, PEL, GTN, MKR, DTS, JBF, W3K, D3P, JZF, M4T (18 Required Single Flange)

B2L, B4N, B1K, L2K, E4K, H3K (Use 345 Single Flange Roller Group 18 Required) Optional use for other 330 machines


Double Flange (DF) (Heavy Duty) – (18) 183-2879Components of GroupRoller Shell (SF) (Heavy Duty) 1 183-2875

Roller Shell (DF) (Heavy Duty) 1 183-2880Bearing (19) 2 6Y-2792Shaft 1 183-2883End Collar 2 179-1497Pin 2 179-1499Retaining Ring 1 –

Pin 1 –Seal – Duo-Cone Group 2 148-3533Toric Ring (19) 2 160-6631Seal – Shaft O-Ring 2 8F-8882Plug 1 9W-2146Stopper 1 –

Plug 1 –

17 These components are not included in the roller group; quantities shown are required to mount each roller.18 Use as required.19 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

605

336E, 336D, 330D, 330C, 330B, 330, 328D336D, 330D, 330C, 330B, 330, 328D TRACK ROLLERS HEAVY DUTYStandard on the B3M, JCD, ERN, MWP, THJ, C5K, LEM, PEL, GTN, MKR, DTS, JBF, W3K, D3P, JZF, M4T (18 Required Single Flange)B2L, B4N, B1K, L2K, E4K, H3K (Use 345 Single Flange Roller Group 18 Required) Optional use for other 330 machines(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERMounting Hardware (20)


336D, 330D, 330C, 328D CENTER GUIDING GUARDS(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 192-8303Bolt 8 8T-5379Washer 8 8T-4167

330B CENTER GUIDING GUARDS(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 133-2504Bolt 8 8T-5379Washer 8 8T-4167

330 CENTER GUIDING GUARDS(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 4I-6514Bolt 8 8T-5379Washer 8 8T-4167

336D, 330D, 330C TRACK ROLLER GUARDS (FULL LENGTH)(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 201-2775Guard Assembly 4 201-2776Bolt (M 24) 24 8T-5379Washer 24 8T-4167Pipe 12 192-8358Bolt (M 24) 12 140-3048Washer 24 8T-4167Support Assembly (Nut) 12 105-6324


606

336E, 336D, 330D, 330C, 330B, 330, 328D336DL, 330DL, 330CL, 328DL TRACK ROLLER GUARDS (FULL LENGTH)

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 189-3861Guard Assembly 4 189-3862Bolt (M 24) 32 8T-5379Washer 32 8T-4167Pipe 16 192-8358Bolt (M 24) 16 140-3048Washer 32 8T-4167Support Assembly (Nut) 16 105-6324

336D, 330D TRACK ROLLER GUARDS (SPROCKET)(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 201-2775Guard Assembly 2 201-2776Bolt (M 24) 12 8T-5379Washer 12 8T-4167Pipe 6 192-8358Bolt (M 24) 6 140-3048Washer 12 8T-4167Support Assembly (Nut) 6 105-6324

336DL, 330DL, 328DL TRACK ROLLER GUARDS (SPROCKET)(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 189-3861Guard Assembly 2 189-3862Bolt (M 24) 16 8T-5379Washer 16 8T-4167Pipe 8 192-8358Bolt (M 24) 8 140-3048Washer 16 8T-4167Support Assembly (Nut) 8 105-6324

330CL SHOE SUPPORT GUARDS(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 219-8212Guard Assembly 4 219-8227Bolt (M 24) 32 8T-5379Washer 32 8T-4167Pipe 16 192-8358Bolt (M 24) 16 140-3048

607

336E, 336D, 330D, 330C, 330B, 330, 328D330CL SHOE SUPPORT GUARDS (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERWasher 16 8T-4167Support Assembly (Nut) 16 226-5103

330D, 330CL FORESTRY MACHINE SHOE SUPPORT GUARDSL2K, E4K, H3K

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 218-5405Guard Assembly 4 218-5404Bolt (M 24) 32 7X-2575Washer 32 8T-4167Pipe 16 218-5439Bolt (M 24) 16 132-5794Washer 16 8T-4167Support Assembly (Nut) 16 226-5103

330B/C/D & 336D/E GENERAL DUTY END GUIDE GUARDS, ROLLER GUARDS etc.Uses the same Guards and Guides as Greased Lubricated Track (GLT).

608

349E, 345D, 345C, 345B349E, 349EL, 349D, 349DL, 345D, 345DL, 345C, 345CL, 345B, 345BL TRACK

GREASE LUBRICATED8.50" (215.9 mm) PITCH - 24 mm BOLT

PART NUMBER 49 SECTION 52 SECTIONLink Assembly (Quantity 2) 301-2307 301-2287Components of Link AssemblyTrack LinksRH Regular 305-9363 49 52LH Regular 305-9364 49 52Other ComponentsPin 8E-4272 48 51Master Pin 253-2740 1 1Bushing 227-3029 48 51Master Bushing 251-8368 (1) 1 1Seal Assembly (Rigid) 250-3998 96 102Seal Assembly - Master (Rigid) 251-7757 2 2Thrust Ring 3P-0623 96 102Thrust Ring - Master 251-8364 2 2Stopper 7G-4332 1 1Plug 6Y-0473 1 1Track Hardware (2)

Bolt 301-2299 196 208Nut 150-4742 196 208Special GroupPin and Bushing Group (52 Sections) 299-1689 – 1

349E, 349EL, 349D, 349DL, 345D, 345DL, 345C, 345CL, 345B, 345BL TRACKGREASE LUBRICATED/POSITIVE PIN RETENTION 2 (PPR2)

349E, 349D, 345D, 345C, 345B (49 SECTION): MDC, JAR, BWY, 2NW, 6MW, 6XS, 8KW, AGS, AMD, AMN, NEG, BYW, FES, FJB, L5R349EL, 349DL, 345DL, 345CL, 345BL (52 SECTION): RFN, GBH, PJW, DHP, SRY, TDG, GJR, LYS, CPX, ESD, TBA, WDE, M2R, D3S, AYF,TAJ, BZN, ELS, CWG, KBA, GPH, 2SW99-UP, 4SS357-UP, 5WS, 7KS200-UP, 8RW, 9CW, 9GS166-UP, DPA, HLC, PBT, JKN, EEH, TKH,RAJ, RGG, MLK, RDC, RAE, YEE, RBT, RGD, GYR, BYC, EEH, KFH, LKY, NLM, MEN, JGB, KHS, NNF, PZG, RBJ, WTD, RGH, MPZ, MZW,

SPG, TFG, WHZ, DGE, KCN, KFX8.50" (215.9 mm) PITCH - 24 mm BOLT

PART NUMBER 49 SECTION 52 SECTIONLink Assembly (Quantity 2) 395-3569 395-3570Components of Link AssemblyTrack LinksRH Regular 390-9143 49 52LH Regular 390-9144 49 52Other ComponentsPin 252-4429 48 51

1 Former master bushing 251-8368, serviced replaced by: (1) 251-8386 master bushing, (2) 251-7757 master seal assembly, (2) 251-8364master thrust ring.

2 Not part of Link Assembly; required to assemble track group.

609

349E, 345D, 345C, 345B349E, 349EL, 349D, 349DL, 345D, 345DL, 345C, 345CL, 345B, 345BL TRACKGREASE LUBRICATED/POSITIVE PIN RETENTION 2 (PPR2)349E, 349D, 345D, 345C, 345B (49 SECTION): MDC, JAR, BWY, 2NW, 6MW, 6XS, 8KW, AGS, AMD, AMN, NEG, BYW, FES, FJB, L5R349EL, 349DL, 345DL, 345CL, 345BL (52 SECTION): RFN, GBH, PJW, DHP, SRY, TDG, GJR, LYS, CPX, ESD, TBA, WDE, M2R, D3S, AYF,TAJ, BZN, ELS, CWG, KBA, GPH, 2SW99-UP, 4SS357-UP, 5WS, 7KS200-UP, 8RW, 9CW, 9GS166-UP, DPA, HLC, PBT, JKN, EEH, TKH,RAJ, RGG, MLK, RDC, RAE, YEE, RBT, RGD, GYR, BYC, EEH, KFH, LKY, NLM, MEN, JGB, KHS, NNF, PZG, RBJ, WTD, RGH, MPZ, MZW,SPG, TFG, WHZ, DGE, KCN, KFX8.50" (215.9 mm) PITCH - 24 mm BOLT(Cont'd.)

PART NUMBER 49 SECTION 52 SECTIONMaster Pin 257-3604 1 1Bushing 227-3029 48 51Master Bushing 251-8368 1 1Seal Assembly (Rigid) 250-3998 96 102Seal Assembly - Master (Rigid) 251-7757 2 2Thrust Ring 3P-0623 96 102Thrust Ring - Master 251-8364 2 2Track Hardware (3)

Bolt 301-2299 196 208Nut 150-4742 196 208

345B, 345BL TRACK345B (49 SECTION): 2NW, 6MW, 6XS, 8KW, AGS, AMD, AMN 345BL (52 SECTION):2SW99-UP, 4SS357-UP, 5WS, 7KS200-UP, 8RW,

9CW, 9GS166-UP8.50" (215.9 mm) PITCH – 24 mm BOLT

PART NUMBER 49 SECTION 52 SECTIONLink Assembly – (Quantity 2) – (4) – (5)

Track LinksRH Regular 305-9363 49 52LH Regular 305-9364 49 52Components of Link AssemblyOther ComponentsPin 8E-4272 48 51Master Pin 211-3295 1 1Bushing 227-3029 48 51Master Bushing 251-8368 1 1Seal (Spring Washer) 8M-6239 196 208Spacer 8M-6238 2 2Track Hardware (6)

Bolt 301-2299 196 208Nut 150-4742 196 208

3 Not part of Link Assembly; required to assemble track group.4 Upgrade to 301-2307 link assembly.5 Upgrade to 301-2287 link assembly.6 Not part of link assembly; required to assemble track group

610

349E, 345D, 345C, 345B345B, 345BL TRACK345B (49 SECTION): 2NW, 6MW, 6XS, 8KW, AGS, AMD, AMN 345BL (52 SECTION):2SW99-UP, 4SS357-UP, 5WS, 7KS200-UP, 8RW,9CW, 9GS166-UP8.50" (215.9 mm) PITCH – 24 mm BOLT(Cont'd.)

PART NUMBER 49 SECTION 52 SECTIONSpecial GroupPin and Bushing Group (52 Section) 206-6004 1 1

349E, 349D, 345D, 345C, 345B TRACK SHOES8.50" (215.9 mm) PITCH – 24 mm BOLT

TYPE WIDTH PLATE THICKNESS PART NUMBER

Single Grouser (Clipped Grouser) 29.5" (750 mm) 17.0 mm 331-9806

Double Grouser (Trapezoidal Opening) 23.6" (600 mm) 15.5 mm 150-4768

Double Grouser (Trapezoidal Opening) (ClippedGrouser)

23.6" (600 mm) 15.5 mm 164-4085



Triple Grouser (Center Punched Slots) 23.6" (600 mm) 14.0 mm 150-4764




Triple Grouser 39.4" (1000 mm) 15.5 mm 214-3529

345B TRACK SHOES8.50" (215.9 mm) PITCH – 22 mm BOLT

TYPE WIDTH PART NUMBERTriple Grouser (Center Punched Slots) 29.5" (750 mm) 133-3843Triple Grouser (Center Punched Slots) 35.4" (900 mm) 130-6606

349E, 349D, 345D, 345C, 345B SPROCKETS(PER SIDE) QUANTITY PART NUMBERSprocket Rim (23 Teeth) 1 124-3296Bolt 20 7X-2575

349E, 349D, 345D, 345C, 345B IDLERSWELDED DESIGN

(PER MACHINE) QUANTITY PART NUMBERIdler Group 2 248-7151Components of GroupIdler Assembly 1 264-9821Bearing (7) 2 124-9979Shaft 1 124-9978

7 Component of preceding assembly or group; quantity shown is quantity per assembly or group

611

349E, 345D, 345C, 345B349E, 349D, 345D, 345C, 345B IDLERSWELDED DESIGN(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERBearing Block 2 115-6370Pin 2 094-3709Seal – Duo-Cone Group 2 109-0868Toric Ring (8) 2 6Y-8134Shaft O-Ring 2 2H-3934Plug 1 7H-3171

349E, 349D, 345D, 345C, 345B IDLERSCAST DESIGN

(PER MACHINE) QUANTITY PART NUMBERIdler Group 2 248-7255Components of GroupIdler Assembly 1 278-7282Bearing (8) 2 124-9979Shaft 1 293-8216Bearing Block 2 115-6370Pin 2 094-3709Seal – Duo-Cone Group 2 109-0868Toric Ring (8) 2 6Y-8134Shaft O-Ring 2 2H-3934Plug 1 7H-3171

349E, 349D, 345D, 345C, 345B CARRIER ROLLERS(PER MACHINE) QUANTITY PART NUMBERGroup – (9) 300-4610Components of GroupRoller Assembly 1 300-4606Bearing 1 6Y-8171Bearing 1 6Y-8172Shaft 1 300-4608Retainer 1 6Y-9339Thrust Washer 1 6Y-8176Cover 1 320-2677Bolt 5 8T-0273Washer 3 3H-7654Seal – Duo-Cone Group 1 9W-2201

8 Component of preceding assembly or group; quantity shown is quantity per assembly or group9 Quantities per machine configuration vary. Check machine for quantity required.

612

349E, 345D, 345C, 345B349E, 349D, 345D, 345C, 345B CARRIER ROLLERS (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERToric Ring (10) 2 6H-1309Plug 1 7H-3171Mounting Hardware (11)

Bolt 1 7X-2583

349E, 349D, 345D, 345C, 345B TRACK ROLLERSCURRENT DESIGN

(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) 16 (12) 370-4381

Double Flange (DF) – (13) 399-5056

Components of GroupRoller Shell (SF) 1 178-7294Roller Shell (DF) 1 –

Bearing (14) 2 123-1382Shaft 1 –

End Collar 2 178-7296Dowel 2 179-4182Seal – Duo-Cone Group 2 176-5331Toric Ring (14) 2 176-5333Seal – Shaft O-Ring 2 175-7897Plug 1 9W-2146Mounting Hardware (15)

Bolt 4 8T-0363Washer 4 8T-4167

349E, 349D, 345D, 345DL, 345C, 345CL, 345B, 345BL CENTER GUIDING GUARDSFIXED GAUGE MACHINES

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 153-1624Bolt 16 7X-2576Spacer 16 7Y-0336

10 Component of preceding assembly or group11 Not included in roller group; quantity shown is required to mount each roller12 18 rollers required with long undercarriage.13 Use as required.14 Component of preceding assembly or group; quantity shown is quantity per assembly or group.15 These components are not included in the roller group; quantities shown are required to mount each roller.

613

349E, 345D, 345C, 345B349E, 349D, 345DL, 345CL, 345BL CENTER GUIDING GUARDS

VARIABLE GAUGE(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 157-1606Bolt 8 7X-2575Washer 8 8T-4167

349E, 349D, 345D, 345C, 345B TRACK ROLLER GUARDS (FULL LENGTH)(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 248-1967Pipe 14 130-4499Bolt 14 140-3048Washer 28 8T-4167Support Assembly 14 105-6324Bolt 32 7X-2576Spacer 32 7Y-0336

349E, 349D, 345DL, 345CL, 345BL TRACK ROLLER GUARDS (FULL LENGTH)(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 251-2473Guard Assembly 4 251-2474Pipe 16 130-4499Bolt 16 140-3048Washer 32 8T-4167Support Assembly 16 105-6324Bolt 32 7X-2576Spacer 32 7Y-0336

349E, 349D, 345DL, 345CL,345BL TRACK ROLLER GUARDS (SPROCKET)(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 251-2473Guard Assembly 2 251-2474Pipe 8 130-4499Bolt 8 140-3048Washer 16 8T-4167Support Assembly 8 105-6324Bolt 16 7X-2576Spacer 16 7Y-0336

614

350350, 350L TRACK

350 (47 SECTION): 2ZL, 7RK, 8HK 350L (51 SECTION): 3ML, 9DK, 9FL9.00" (228.6 mm) PITCH – 22 mm BOLT

PART NUMBER 47 SECTION 51 SECTIONLink Assembly – (Quantity 2) 8E-6089 8E-6090Components of Link AssemblyTrack LinksRH Regular 8E-6091 47 51LH Regular 8E-6092 47 51Other ComponentsPin 1M-1455 46 50Master Pin 8E-6094 1 1Bushing 8E-6095 46 50Master Bushing 8E-6096 1 1Seal (Spring Washer) 8M-2620 188 204Spacer 8M-2621 2 2Track Hardware (1)

Bolt 143-4891 188 204Bolt (2) 6Y-9024 188 204Nut 9W-4381 188 204Special GroupPin and Bushing Group (51 Section) 206-6049 1 1

350 TRACK SHOES9.00" (228.6 mm) PITCH – 22 mm BOLT

TYPE WIDTH PLATE THICKNESS PART NUMBERSingle Grouser (Trap, Clip Grouser) 27.6" (700 mm) 19.0 mm 108-4605 (3)

Double Grouser (Trap) 23.6" (600 mm) 19.0 mm 166-4927Double Grouser (Trap, Clip Grouser) 23.6" (600 mm) 19.0 mm 166-4928Double Grouser (Trap) 29.5" (750 mm) 19.0 mm 166-4929Triple Grouser (Center Punched Slots) 23.6" (600 mm) 14.0 mm 8E-6097Triple Grouser (Center Punched Slots) 23.6" (600 mm) 15.5 mm 145-9320

Triple Grouser (Center Punched Slots) 29.5" (750 mm) 15.5 mm 8E-6098Triple Grouser (Center Punched Slots) 33.5" (850 mm) 15.5 mm 1Q-4774Triple Grouser (Center Punched Slots) 35.4" (900 mm) 15.5 mm 8E-6099

350 SPROCKETS(PER SIDE) QUANTITY PART NUMBERSprocket Rim (23 Teeth) 1 8E-6974Bolt 23 7X-2575

1 Not part of link assembly; required to assemble track group.2 Shorter bolt for use with 600 mm triple grouser shoe, with plate thickness 14.0 mm.3 Service replacement 386-3936

615

350350 IDLERS

(PER MACHINE) QUANTITY FORMER PART NUMBER PART NUMBERIdler Group 2 – (4) 135-8903

Components of GroupIdler Assembly 1 138-8389 138-8389Bearing (5) 2 8E-4343 8E-4343Shaft 1 8E-4335 8E-4335Bearing Block 2 7Y-1871 135-8920Pin 2 094-3709 094-3709Seal – Duo-Cone Group 2 109-0868 109-0868Toric Ring (5) 2 6Y-8134 6Y-8134Seal – Shaft O-Ring 2 2H-3934 2H-3934Plug 1 7H-3171 7H-3171

350 CARRIER ROLLERS(PER MACHINE) QUANTITY PART NUMBERGroup 6 8E-4623Mounting Hardware (6)

Bolt 1 7X-2584

350 TRACK ROLLERS(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) 16 189-0475


Bolt 4 8T-0363Washer 4 8T-4167

350 CENTER GUIDING GUARDS(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 4I-4906Bolt 8 7X-2575Washer 8 8T-4167

4 Upgrade to 135-8903 Idler Gp.5 Component of preceding assembly or group; quantity shown is quantity per assembly or group.6 Not included in roller group; quantity shown is required to mount each roller.7 Use as required.8 These components are not included in the roller group; quantities shown are required to mount each roller.

616

374D, 365CL, 365BL365CL, 365BL, GREASE TRACK

MEM, MCS, FEN, ELC, MCY, 4XZ, 9PZ, 9TZ, AGD10.25" (260.4 mm) PITCH – 27 mm BOLT

QUANTITY GREASED PART NUMBERLink Assembly – 47 Section 2 246-0504Components of Link AssemblyTrack LinksRH Regular 47 142-1803LH Regular 47 142-1804Other ComponentsPin 46 2M-5652Master Pin 1 253-2741Bushing 46 245-3805Master Bushing 1 245-3806Seal Assembly 92 248-1537Seal Assembly - Master 2 244-8697Thrust Ring 92 2P-9419Thrust Ring - Master 2 245-3808Stopper 1 7G-4332Plug 1 6Y-0473Track Hardware (1)

Bolt 188 144-0805Nut 188 144-0806Special GroupPin and Bushing Group 1 299-1690

374D, 365C, 365B, TRACK GREASE LUBRICATED/POSITIVE PIN RETENTION (PPR2)MEM, MCS, FEN, ELC, MCY, 4XZ, 9PZ, 9TZ, AGD

10.25" (260.4 mm)PITCH – 27 mm BOLT

QUANTITY PART NUMBERLink Assembly – 47 Section 2 294-3060Components of Link AssemblyTrack LinksRH Regular 47 296-4361LH Regular 47 296-4362Other ComponentsPin 46 294-3061Master Pin 1 294-3062Bushing 46 245-3805Master Bushing 1 245-3806Seal 92 248-1537Master Seal 2 244-8697


617

374D, 365CL, 365BL374D, 365C, 365B, TRACK GREASE LUBRICATED/POSITIVE PIN RETENTION (PPR2)MEM, MCS, FEN, ELC, MCY, 4XZ, 9PZ, 9TZ, AGD10.25" (260.4 mm)PITCH – 27 mm BOLT(Cont'd.)

QUANTITY PART NUMBERThrust Ring 92 2P-9419Thrust Ring Master 2 245-3808Track Hardware (2)

Bolt 188 144-0805Nut 188 144-0806

374D, 365CL, 365BL TRACK SHOES(PER MACHINE) WIDTH PLATE THICKNESS PART NUMBERDouble Grouser (Trapezoidal opening) 25.6" (650 mm) 20.5 mm 144-8598Double Grouser (Center Punched) 29.5" (750 mm) 19.0 mm 144-8602Double Grouser (Trapezoidal Opening) 29.5" (750 mm) 20.5 mm 166-4932Double Grouser (Trapezoidal Opening) 35.4" (900 mm) 20.5 mm 166-4933Double Grouser (Trapezoidal Opening) 39.4" (1,000 mm) 20.5 mm 283-2115

365CL, 365BL SPROCKETS(PER SIDE) QUANTITY PART NUMBERSprocket Rim (21 tooth) 1 141-9655Bolt 21 145-2970Washer 21 9X-8399

374D, 365C, 365CL, 365B, 365BL IDLERSHEAVY DUTY DESIGN


Components of GroupIdler Assembly and Bearing 1 352-3735Bearing (3) 2 6Y-7599Shaft 1 293-8217Bearing Block 2 136-2446Pin 2 6Y-7603Seal – Duo-Cone Group 2 109-0861Toric Ring 2 6Y-7592Shaft O-Ring 2 2H-3928Plug 1 7H-3171

2 Not part of link assembly; required to assemble track group.3 Component of preceding assembly or group; quantity shown is quantity per assembly or group

618

374D, 365CL, 365BL374D, 365CL, 365BL CARRIER ROLLERS

(PER MACHINE) QUANTITY PART NUMBERGroup 6 300-4611Mounting Hardware (4)

Bolt 1 7X-2584

374D, 365CL, 365BL TRACK ROLLERS(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) 16 421-2561


Bolt 4 107-3953Washer 4 9X-8258

365CL, 365BL CENTER GUIDING GUARDS(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 148-3095Bolt 8 8C-8723Spacer 8 148-3111

4 Not included in roller group; quantity shown is required to mount each roller.5 Use as required.6 These components are not included in the roller group; quantities shown are required to mount each roller.

619

375, 5080375, 375L, 5080 TRACK

375, 5080 (47 SECTION): 6NK, 8WJ, 8XG, 6XK, 8SL 375L (51 SECTION): 1JM, 6RL, 9WL10.25" (260.4 mm) PITCH – 27 mm BOLT

SEALED PART NUMBER 47 SECTION 51 SECTIONLink Assembly (Quantity 2) 6Y-7453 107-0669Components of Link AssemblyTrack LinksRH Regular 6Y-6721 47 51LH Regular 6Y-6722 47 51Other ComponentsPin 2M-5652 46 50Master Pin 8M-6910 1 1Bushing 8E-1886 46 50Master Bushing 8E-1887 1 1Seal (Spring Washer) 1S-4446 188 204Spacer 1S-4445 2 2Track Hardware (1)

Bolt 6Y-7432 188 204Nut 6Y-7433 188 204Special GroupPin and Bushing Group (51 Section) 206-6050 1 1

375, 5080 TRACK SHOES10.25" (260.4 mm) PITCH – 27 mm BOLT

TYPE WIDTH PART NUMBERSingle Grouser 24.0" (610 mm) 6Y-7610Double Grouser (Trapezoidal Opening) 24.0" (610 mm) 166-4931Double Grouser (Trapezoidal Opening, Clip Grouser) 24.0" (610 mm) 166-4930Double Grouser (Trapezoidal Opening) 29.5" (750 mm) 166-4932Double Grouser (Trapezoidal Opening) (2) 35.4" (900 mm) 166-4933Double Grouser (Trapezoidal Opening) 39.4" (1,000 mm) 283-2115

375, 5080 SPROCKETS(PER SIDE) QUANTITY PART NUMBERSprocket Rim (23 Teeth) 1 8E-4686Bolt 23 7Y-1810Washer 23 9X-8399

1 Not part of link assembly; required to assemble track group.2 Use only on 375.

620

375, 5080375, 5080 IDLERS



Bearing (4) 2 6Y-7599Shaft 1 6Y-7602Bearing Block 2 115-6359Pin 2 6Y-7603Seal – Duo-Cone Group 2 109-0861Seal – Shaft O-Ring 2 2H-3928Plug 1 7H-3171

375, 5080 CARRIER ROLLERS(PER MACHINE) QUANTITY PART NUMBERGroup 6 300-4611Mounting Hardware (5)

Bolt 1 7X-2584

375, 5080 TRACK ROLLERS(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) 16 366-3380


Bolt 4 107-3953Washer 4 9X-8258

375 CENTER GUIDING GUARDS(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 7Y-8973Bolt 8 7Y-5232Washer 8 9X-8258

3 Serviced by 357-75504 Component of preceding assembly or group; quantity shown per assembly or group.5 Not included in roller group; quantity shown is required to mount each roller.6 Use as required.7 These components are not included in the roller group; quantities shown are required to mount each roller.

621

375, 50805080 TRACK ROLLER GUARDS

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 123-5540 (8)




Pipe 14 7Y-2914Bolt 14 105-6203Support Assembly 4 101-2160Support Assembly 10 101-2162Bolt 28 7Y-5232Washer 56 9X-8258

8 These 2 guard assemblies replaced 101-2164.9 These 2 guard assemblies replaced 101-2165.

622

390D, 390DL, 385C, 385B, 5090385C, 385CL, 385C FS, 385B, 385BL 5090B GREASE TRACK

385C, 385C FS, 385B, 5090B (47 Section): KBC, MNZ, JCM, BKF, BKX, CLS, T2F, KKK, GLT, MMA, EAM, CLD 385CL, 385BL (51 Sections):T2E, EDA, SBE, KGB, ANS, BLY, FDL10.25" (260.4 mm) PITCH - 30 mm BOLTPART NUMBER 47 SECTION 51 SECTION

Link Assembly – (Quantity 2) 246-0505 246-0506Components of Link AssemblyTrack LinksRH Regular 174-0217 47 51LH Regular 174-0218 47 51Other ComponentsPin 174-0219 46 50Master Pin 253-2742 1 1Bushing 245-3805 46 50Master Bushing 245-3806 1 1Seal Assembly 248-1537 92 100Seal Assembly - Master 244-8697 2 2Thrust Ring 2P-9419 92 100Thrust Ring - Master 245-3808 2 2Stopper 7G-4332 1 1Plug 6Y-0473 1 1Track Hardware (1)

Bolt 174-0221 188 204Nut 174-0222 188 204

390D, 390DL, 385C, 385CL, 385C FS, 385B, 385BL, 5090B TRACK GREASE LUBRICATED/POSITIVE PIN RETENTION (PPR2)

390D, 385C, 385C FS, 385B, 5090B (47 Section): KBC, MNZ, JCM, BKF, BKX, CLS, T2F, KKK, GLT, MMA, EAM, CLD, KCZ, BYP390DL, 385CL, 385BL (51 Sections): T2E, EDA, SBE, KGB, ANS, BLY, FDL, WBT, WAP, WAG


Link Assembly (Quantity 2) 297-0130 297-0129Components of Link AssemblyTrack LinksRH Regular 296-4359 47 51LH Regular 296-4360 47 51Other ComponentsPin 294-3063 46 50Master Pin 294-3064 1 1Bushing 245-3805 46 50Master Bushing 245-3806 1 1Seal 248-1537 92 100Seal Assembly 244-8697 2 2


623

390D, 390DL, 385C, 385B, 5090390D, 390DL, 385C, 385CL, 385C FS, 385B, 385BL, 5090B TRACK GREASE LUBRICATED/POSITIVE PIN RETENTION (PPR2)390D, 385C, 385C FS, 385B, 5090B (47 Section): KBC, MNZ, JCM, BKF, BKX, CLS, T2F, KKK, GLT, MMA, EAM, CLD, KCZ, BYP390DL, 385CL, 385BL (51 Sections): T2E, EDA, SBE, KGB, ANS, BLY, FDL, WBT, WAP, WAG10.25" (260.4 mm) PITCH – 30 mm BOLT(Cont'd.)

PART NUMBER 47 SECTION 51 SECTIONThrust Ring 2P-9419 92 100Thrust Ring - Master 245-3808 2 2Track Hardware (2)

Bolt 301-2301 188 204Nut 174-0222 188 204

385B, 385BL, 5090B TRACK390D, 385B, 5090B (47 Section): BKF, BKX, CLS, CLD 385BL (51 Sections): ANS, BLY, FDL

10.25" (260.4 mm) PITCH - 30 mm BOLT

PART NUMBER 47 SECTION 51 SECTIONLink Assembly (Quantity 2) 246-0505 246-0506Components of Link AssemblyTrack LinksRH Regular 174-0217 47 51LH Regular 174-0218 47 51Other ComponentsPin 174-0219 46 50Master Pin 174-0220 1 1Bushing 8E-1886 46 50Master Bushing 8E-1887 1 1Washer 1S-4446 188 204Spacer 1S-4445 2 2Track Hardware (3)

Bolt 174-0221 188 204Nut 174-0222 188 204

390D, 390DL, 385C, 385CL, 385C FS, 385B, 385BL, 5090B TRACK SHOES10.25" (260.4 mm) PITCH - 30 mm BOLT

TYPE WIDTH PART NUMBERSingle Grouser 25.6" (650 mm) 174-0227Double Grouser (Trapezoidal Opening) 25.6" (650 mm) 174-0223Double Grouser (Trapezoidal Opening) Heavy Duty 25.6" (650 mm) 301-2283Double Grouser (Trapezoidal Opening, Clipped Grouser) 25.6" (650 mm) 174-0224Double Grouser (Trapezoidal Opening, Clipped Grouser) HeavyDuty

25.6" (650 mm) 301-2281

2 Not part of Link Assembly; required to assemble track group.3 Not part of the link assembly; required to assemble track group.

624

390D, 390DL, 385C, 385B, 5090390D, 390DL, 385C, 385CL, 385C FS, 385B, 385BL, 5090B TRACK SHOES10.25" (260.4 mm) PITCH - 30 mm BOLT(Cont'd.)TYPE WIDTH PART NUMBERDouble Grouser (Trapezoidal Opening) 29.0" (750 mm) 174-0225Double Grouser (Trapezoidal Opening) Heavy Duty 29.0" (750 mm) 301-2285Double Grouser (Trapezoidal Opening) 35.4" (900 mm) 174-0226Double Grouser (Trapezoidal Opening) Heavy Duty 35.4" (900 mm) 301-2279Double Grouser (Trapezoidal Opening) 41.3" (1,050 mm) 222-1779Double Grouser (Trapezoidal Opening) Heavy Duty 41.3" (1,050 mm) 301-2293

390D, 390DL, 385C, 385CL, 385C FS, 385B, 385BL, 5090B SPROCKETS(PER SIDE) QUANTITY PART NUMBERSprocket (23 Tooth) 1 201-1704Bolt 28 145-2970Spacer 28 199-4501

390D, 385C, 385CL, 385C FS, 385B, 385BL, 5090B IDLERSHEAVY DUTY DESIGN

(PER MACHINE) QUANTITY PART NUMBERIdler Group 2 340-8242Components of GroupIdler Assembly 1 278-7286 (4)

Bearing (5) 2 6Y-7599Shaft 1 293-8218Bearing Block 2 194-1156Pin 2 194-1155Seal – Duo-Cone Group 2 171-5825Toric Ring 2 171-5714Shaft O-Ring 2 2H-3928Plug 1 7H-3171

385C, 385CL, 385C FS, 385B, 385BL, 5090B CARRIER ROLLERS(PER MACHINE) QUANTITY PART NUMBERGroup 6 300-4611Components of GroupRoller Assembly 1 242-4067Bearing (6) 1 6Y-8171

4 Serviced replaced by: 352-3740.5 Component of preceding assembly or group; quantity shown is quantity per assembly or group6 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

625

390D, 390DL, 385C, 385B, 5090385C, 385CL, 385C FS, 385B, 385BL, 5090B CARRIER ROLLERS (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERBearing (7) 1 6Y-8172Shaft Assembly 1 242-4070Retainer 1 6Y-9339Thrust Washer 1 6Y-8176Cover 1 6Y-8177Bolt 5 8T-8441Seal – Duo-Cone Group 1 171-5811Toric Ring (7) 2 171-5713Seal – Cover 1 4H-9105Plug 1 7H-3171Mounting Hardware (8)

Bolt 6 7X-2584

390D, 390DL, 385C, 385CL, 385C FS, 385B, 385BL, 5090B TRACK ROLLERS(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) – (9) 366-3380Mounting Hardware (10)

Bolt 4 107-3953Washer 4 9X-8258

385C, 385CL, 385C FS, 385B, 385BL, 5090B END GUIDING GUARDS(PER MACHINE) QUANTITY PART NUMBERGuard Assembly (11) 4 189-3987 (12)

Bolt (30M) 16 8C-8723Spacer 16 148-3111

385B, 385BL FULL LENGTH ROLLER GUARDS(PER MACHINE) QUANTITY PART NUMBERGuard Assembly (13) 4 174-8500 (14)

Guard Assembly (13) 4 174-8501 (15)

7 Component of preceding assembly or group; quantity shown is quantity per assembly or group.8 Not included in roller group; quantity shown is required to mount each roller.9 The 385C, 385B, 385C FS, 5090B uses 16 track rollers, the 385CL, 385BL uses 18 track rollers.10 Not included in roller group; quantity shown is required to mount each roller group.11 For 385B Front Mounting Position Number 2 Roller, Rear Mounting Position Number 7 Roller. For 385B L Front Mounting Position Number

2 Roller, Rear Mounting Position Number 8 Roller. The 385 PPR2 pins are 10 mm shorter on each end, so either the existing track guidesmust be modified to move the guiding surface inboard 10 mm, or all new track guides must be installed. Please refer to REHS2586 formodification instructions.

12 PPR2 UC 297-751913 The 385 PPR2 pins are 10 mm shorter on each end, so either the existing track guides must be modified to move the guiding surface in-

board 10 mm, or all new track guides must be installed. Please refer to REHS2586 for modification instructions.14 PPR2 Full Length Guards Std UC 297-7521, PPR2 Full Length Guards Long UC 297-752415 PPR2 Full Length Guards Std UC 297-7522, PPR2 Full Length Guards Long UC 297-7525

626

390D, 390DL, 385C, 385B, 5090385B, 385BL FULL LENGTH ROLLER GUARDS (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERPipe 16 176-2146Bolt (30M) 16 176-7524Washer 32 9X-8258Support Assembly 16 101-2160Bolt (30M) 32 8C-8723Spacer 32 148-3111

385C, 385CL, 385C FS, 385B, 385BL, 5090B CENTER GUIDING GUARDS(PER MACHINE) QUANTITY PART NUMBERGuard Assembly (16) 2 176-2108 (17)

Bolt (30M) 8 8C-8723Spacer 8 148-3111

16 The 385 PPR2 pins are 10 mm shorter on each end, so either the existing track guides must be modified to move the guiding surface in-board 10 mm, or all new track guides must be installed. Please refer to REHS2586 for modification instructions.

17 PPR2 UC 297-7517

627

5110B5110B TRACK

GREASEDAAA

10.25" (260.4 mm) PITCH -1 1/8" BOLTQUANTITY PART NUMBER

Link Assembly – 55 Section 2 125-9384Components of Link AssemblyTrack LinksRH Master 1 125-9381LH Master 1 125-9380RH Regular 54 9W-5933LH Regular 54 9W-5934Other ComponentsPin 54 125-9383Master Pin 1 125-9382Bushing 55 143-0746Seal Assembly 110 222-7001Thrust Ring 110 9W-9625 (1)

Retaining Ring (PPR) 108 6Y-0471Retaining Ring (Master) 2 7G-3431Track Hardware (2)

Bolt 220 5P-3868Nut 220 5P-8221

5110B TRACK SHOES10.25" (260.4 mm) PITCH 1 1/8" BOLT

TYPE WIDTH PART NUMBERDouble Grouser (3) 27.6" (700 mm) 168-8409Double Grouser (3) 35.4" (900 mm) 168-8408Double Grouser (3) 39.0" (1000 mm) 168-8407

5110B SPROCKETS(PER SIDE) QUANTITY PART NUMBERSprocket (13 Teeth) 1 123-1216

Bolt (M30 x 3.5) 28 9X-6618Washer 28 9X-8399Bolt (M12 x 2) 3 8T-6429

1 Service replaced by 352-9711.2 Not part of link assembly; required to assemble track group.3 Keyed Shoe, Clipped Grousers and Center Punched Hole.

628

5110B5110B IDLERS


Components of GroupIdler Assembly 1 121-7351Bearing (4) 2 121-7371Plug (4) 1 2P-0347Seal - Plug O-Ring (4) 1 1S-8947Shaft 1 123-1227Bearing Block 2 167-1128 (5)

Pin 2 121-7373Seal – Duo-Cone Group 2 6T-8435Toric Ring (4) 2 1M-9011Seal – Shaft O-Ring 2 9M-3786Bracket – Tie 1 170-0820Bolt (M30) 4 3E-8032 (6)

Washer 4 6I-7081

5110B CARRIER ROLLERS(PER MACHINE) QUANTITY PART NUMBERGroup 6 159-8346Components of GroupRoller Shell Assembly 1 126-4969Bearing Sleeve (7) 1 126-4975Bearing (7) 1 126-4976Shaft Assembly (w/collar) 1 126-4968Retainer 1 126-4971Bolt 2 6V-5844Cover Assembly 1 126-4970Gasket 1 126-4977Bolt 3 6V-5686Seal – Duo-Cone Group 1 176-5331Toric Ring (7) 2 176-5333Plug 1 9W-2146Mounting Hardware (8) -

Bolt (M24) 1 6V-8132Washer 1 8T-4167

4 Component of preceding assembly or group; quantity shown is quantity per assembly.5 Serviced Replaced by: 123-1218.6 Serviced Replaced By: 163-8682.7 Component of preceding assembly or group; quantity shown is quantity per assembly or group.8 Not included in roller group, quantities shown are required to mount each roller.

629

5110B5110B TRACK ROLLERS


Components of GroupRoller Shell (SF) 1 230-7159Bearing (9) 2 125-7878Shaft 1 230-7154End Collar 2 230-7156Washer 2 125-7879Dowel 2 228-8376Seal – Duo-Cone Group 2 6T-8438Toric Ring (9) 2 2M-0344Seal – Shaft O-Ring 2 1S-7408Plug 2 9W-2146Mounting Hardware (10)

Bolt (M30) 4 8T-6624Washer 4 9X-8399

5110B END GUIDING GUARDS(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 123-1256Bolt (30M) 16 7Y-5232Washer 16 9X-8399

5110B FULL LENGTH GUARDS(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 123-1273Guard Assembly 4 127-0159Bolt (M30) 32 7Y-5232Washer 32 9X-8399Pipe 16 127-0181Bolt (M30) 16 113-1047Washer 16 9X-8399Support Assembly (Nut) 16 127-0204

9 Component of preceding assembly or group; quantity shown per assembly or group.10 Not included in roller group; quantity shown is required to mount each roller group.

630

5110B5110B CENTER GUIDING GUARDS

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 175-7045Bolt (30M) 8 7Y-5232Washer 8 9X-8399

631

5130B, 51305130B, 5130 TRACK

4CS, 5ZL, 7TJ12.50" (317.5 mm) PITCH – 1-3/8" BOLT


Components of Link AssemblyTrack LinksRH Master 1 124-8469LH Master 1 124-8470RH Regular 47 6T-8049LH Regular 47 6T-8050Other ComponentsPin 47 121-5394Master Pin 1 121-5395Bushing 48 207-6061Seal Assembly 96 222-7007Thrust Ring 96 256-6084 (2)

Retaining Ring (PPR) 94 6Y-0472Retaining Ring (Master) 2 124-8468Track Hardware (3)

Bolt (Use with 162-5610, 11,12, shoes) 192 6T-8853Bolt (Use with 153-7806, 07, 08, shoes & earlier design) 192 6I-8648Nut 192 3T-6292

5130B, 5130 TRACK SHOES12.50" (317.5 mm) PITCH – 1-3/8" BOLT

TYPE WIDTH PART NUMBERDouble Grouser (Trapezoidal Opening) 25.6" (650 mm) 162-5610Double Grouser (Trapezoidal Opening) 31.5" (800 mm) 162-5611Double Grouser (Trapezoidal Opening) 39.4" (1000 mm) 162-5612

5130B, 5130 SPROCKETS(PER SIDE) QUANTITY PART NUMBERSprocket Rim (13 Teeth) 1 6I-7230Bolt 30 3E-8032 (4)

Bolt 3 7X-2557Washer 30 6I-7081

1 Positive pin Retention Track; Sealed & Greased.2 Service replaced by 352-9711.3 Not part of link assembly; required to assemble track group.4 Serviced Replaced By: 163-8682.

632

5130B, 51305130B, 5130 IDLERS


Components of GroupIdler Assembly 1 218-5073Bearing (5) 2 6I-7083Plug 1 2P-0347Shaft 1 6I-7076Bearing Block 2 6I-7077Bracket-Tie 1 6I-7079Pin 2 6I-7084Bolt 4 3E-8032 (6)

Washer 4 6I-7081Seal – Duo-Cone Group 2 9W-4651Toric Ring (5) 2 5P-1608Seal – Shaft O-Ring 2 8T-6444Seal – Plug O-Ring 1 1S-8947

5130B, 5130 CARRIER ROLLERS(PER MACHINE) QUANTITY PART NUMBERGroup 4 159-8347

Components of GroupRoller Shell Assembly 1 113-5883Bushing 1 126-4976Bushing 1 126-4975Shaft Assembly 1 113-5880Retainer 2 126-4971Bolt 2 6V-5844Cover Assembly 1 126-4970Gasket 1 126-4977Bolt 3 6V-5686Seal – Duo-Cone Group 2 176-5331Toric Ring (7) 2 176-5333Plug 1 9W-2146

5 Component of preceding assembly or group; quantity shown per assembly or group.6 Serviced Replaced By: 163-8682.7 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

633

5130B, 51305130B, 5130 TRACK ROLLERS

(PER MACHINE) QUANTITY FORMER PART NUMBER PART NUMBERSingle Flange (SF) 16 – (8) 155-4102Components of GroupRoller Shell Assembly (SF) 1 113-5894 155-4103Bushing (9) 2 113-5896 155-4105Shaft 1 113-5891 178-3927End Collar 2 178-3929 178-3929Washer 2 – 155-4106Pin 2 113-5890 113-5890Seal – Duo-Cone Group 2 6T-8435 171-5897Toric Ring (9) 2 1M-9011 163-7376Seal – Shaft O-Ring 2 6V-5657 6V-5657Plug 2 9W-2146 9W-2146Mounting Hardware (10)

Bolt 4 3E-8032 163-8682Washer 4 6I-7081 6I-7081

5130B, 5130 TRACK GUIDING GUARDS(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 107-0356Bolt 48 8T-0672Washer 48 6V-8237

8 Upgrade to 155-41029 Component of preceding assembly or group; quantity shown is quantity per assembly or group.10 Not included in roller group: Quantity shown is required to mount each roller.

634

52305230 TRACK*

7LL14.90" (378.5 mm) PITCH

QUANTITY FORMER PART NUMBER PART NUMBERTrack Link/Shoe (47 sections)43" (1100 mm) Rock/General Purpose 1 – 185-9380Bushing (per shoe) (1) 2 – 168-7576Bushing (per shoe) (1) 4 – 168-757751" (1300 mm) Rock/General Purpose 1 – 185-9381Bushing (per shoe) (1) 2 – 168-7576Bushing (per shoe) (1) 4 – 168-757759" (1550 mm) Soft Underfoot 1 – 185-9382Bushing (per shoe) (1) 2 – 168-7576Bushing (per shoe) (1) 4 – 168-7577Other ComponentsPin 94 110-3118 110-3118Plate 94 110-3119 175-1229Retaining Ring 94 107-1036 9T-2584Track GroupsTrack Group (5 sections) - 43" (1100 mm) (2) 9 – 150-0392Track Group (5 sections) - 51" (1300 mm) (2) 9 – 150-0394Track Group (5 sections) - 59" (1900 mm) (2) 9 – 150-0396

* 5230 Track is a special shovel style track consisting of single piece cast track joints (shoe, links, and track guides) and solid, positively retained track pins (re-fer to IRM's UC95-10, UC97-8, UC98-21, and UC01-03 for details).

5230 SPROCKETS(PER SIDE) QUANTITY PART NUMBERSprocket Rim (14 Teeth) 1 131-7083Bolt 46 100-3205Washer 46 6I-7081Seal – O-Ring 1 7X-4778

5230 IDLERS(PER MACHINE) QUANTITY PART NUMBERIdler Group 2 –

Components of GroupIdler Assembly 1 6I-7553Bearing (3) 2 6I-7555Shaft 1 6I-7550

1 Component of preceding assembly or group. Bushings can be ordered individually to repair a worn shoe or to retrofit into an old styleshoe.

2 An additional 2 Shoes, 4 Pins, 4 Plates and 4 Retaining Rings must be ordered for a complete (47 section) track.3 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

635

52305230 IDLERS (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERBearing Block 2 6I-7508Bolt 4 3E-8032 (4)

Washer 4 6I-7081Pin 2 6I-7554Seal – Duo-Cone Group 2 9W-4652Toric Ring (5) 2 3P-1849Seal – Shaft O-Ring 2 4N-1230Seal – Plug 1 1S-8947Plug 1 2P-0347

5230 CARRIER ROLLERS(PER MACHINE) QUANTITY PART NUMBERGroup 6 6I-7547Components of GroupRoller Shell Assembly (SF) 1 113-5902Bushing (6) 2 113-5903Shaft 1 113-5900End Collar 2 113-5901Pin 2 125-7877Seal – Duo-Cone Group 2 6T-8438Toric Ring (6) 2 2M-0344Seal – Shaft O-Ring 2 7F-6268Plug 2 9W-2146

5230 TRACK ROLLERS(PER MACHINE) QUANTITY FORMER PART NUMBER PART NUMBERSingle Flange (SF) 16 – (7) 155-4107Components of GroupRoller Shell Assembly (SF) 1 142-4413 (8) 155-4109Bushing (5) 2 142-4414 155-4111Shaft 1 142-4412 178-2545End Collar 2 173-9775 178-2543Washer 2 – 155-4112Pin 1 113-5905 113-5905Ring 2 113-5912 113-5912Seal – Duo-Cone Group 2 6T-8437 171-5898

4 Serviced Replaced By: 163-8682.5 Component of preceding assembly or group; quantity shown is quantity per assembly or group.6 Component of preceding assembly or group.7 Upgrade to 155-4107.8 Former roller shell 113-5908 is cancelled and replaced by one 142-4413 roller assembly and one 142-4412 shaft.

636

52305230 TRACK ROLLERS (Cont'd.)(PER MACHINE) QUANTITY FORMER PART NUMBER PART NUMBERToric Ring (9) 2 4M-0660 171-5899Seal – Shaft 2 2H-6124 2H-6124Plug 2 9W-2146 9W-2146


637

205205B TRACK

5ZF6.75" (171.5 mm) PITCH – 5/8" BOLT


Components of Link AssemblyTrack LinksRH Master 1 9K-0029LH Master 1 9K-0028RH Regular 44 9K-6629LH Regular 44 9K-6628Other ComponentsPin 44 9K-4060Master Pin 1 9K-4062Bushing 44 9K-4061Master Bushing 1 7K-2020Seal (Spring Washer) 180 7K-2018Spacer 2 9K-4059Track Hardware (2)

Bolt 180 7H-3597Nut 180 1M-1408Special GroupPin and Bushing Group (38 Sections) 1 1V-8623

205B CLASSIC GREASED TRACK5ZF


Components of Link AssemblyTrack LinksRH Regular 44 289-9337LH Regular 44 289-9338Other ComponentsPin 44 290-3453Master Pin 1 290-3456Bushing 44 290-3454Master Bushing 1 290-3457Seal 180 290-3455Spacer 2 290-3458Track Hardware (2)

Bolt 180 175-8552

1 Serviced replaced by 47-section Classic Greased Link Assembly 290-3450 and remove 2 sections.2 Not part of link assembly; required to assemble track group.3 Remove 2 sections

638

205205B CLASSIC GREASED TRACK5ZF(Cont'd.)

QUANTITY PART NUMBERNut 180 200-9150Special GroupPin and Bushing Group (38 Sections) 1 1V-8623

205 TRACK3HC, 4DC

6.75" (171.5 mm) PITCH – 16 mm BOLT

QUANTITY UNSEALED PART NUMBERLink Assembly – 47 Section 2 8U-3456 (4)

Components of Link AssemblyTrack LinksRH Regular 47 8U-2927LH Regular 47 8U-2926Other ComponentsPin 46 5W-4149Master Pin 1 5W-4151Bushing 46 5W-4148Master Bushing 1 5W-4150Spacer 2 5W-4152Track Hardware (5)

Bolt 188 3Y-4297Bolt (6) 188 7H-3597Nut 188 1M-1408

205 TRACK3HC, 4DC

6.75" (171.5 mm) PITCH – 14 mm BOLT

QUANTITY UNSEALED PART NUMBERLink Assembly – 47 Section 2 5W-7283 (4)

Components of Link AssemblyTrack LinksRH Regular 47 5W-4147LH Regular 47 5W-4146Other ComponentsPin 46 5W-4149Master Pin 1 5W-4151Bushing 46 5W-4148

4 Link assembly no longer serviced.5 Not part of link assembly; required to assemble track group.6 Required for 35" (889 mm).

639

205205 TRACK3HC, 4DC6.75" (171.5 mm) PITCH – 14 mm BOLT(Cont'd.)

QUANTITY UNSEALED PART NUMBERMaster Bushing 1 5W-4150Spacer 2 5W-4152Track Hardware (7)

Bolt 188 7H-3596Nut 188 7H-3606

205 TRACK SHOES5ZF

6.75" (171.5 mm) PITCH – 5/8" BOLT

TYPE WIDTH PART NUMBERTriple Grouser 23.6" (600 mm) 8E-3332Classic Triple Grouser 23.6" (600 mm) 175-8184Triple Grouser 29.5" (750 mm) 8E-3333Triple Grouser 35.4" (900 mm) 8E-3334

205 TRACK SHOES3HC, 4DC

6.75" (171.5 mm) PITCH – 16 mm BOLT

TYPE WIDTH PART NUMBERTriple Grouser 35.4" (900 mm) 5W-9834

205 TRACK SHOES3HC, 4DC

6.75" (171.5 mm) PITCH – 14 mm BOLT


205B, 205 CLASSIC SPROCKETS 5ZF, 3HC, 4DC(PER SIDE) QUANTITY PART NUMBERSprocket (23 Teeth) 1 322-6236Bolt 16 8T-0281

205 IDLERS5ZF

(PER SIDE) QUANTITY PART NUMBERComponents of GroupIdler Assembly 1 9W-8045


640

205205 IDLERS5ZF(Cont'd.)(PER SIDE) QUANTITY PART NUMBERBearing (8) 2 8E-0645Shaft 1 9W-2143Bearing Block 2 9C-2498Seal – Duo-Cone Group 2 9W-2142Toric Ring (8) 2 8H-2265Seal – Shaft O-Ring 2 7F-8268Plug 1 7H-3171Pin 2 9W-2145Ring 1 1H-8397

205 IDLERS3HC, 4DC

(PER SIDE) QUANTITY PART NUMBERComponents of GroupIdler Assembly 1 5W-4168Bearing (8) 2 5W-4142Shaft 1 5W-4159Bearing Block 2 5W-4158Seal – Shaft O-Ring 2 4J-0526Plug 1 9W-2146Pin 2 5W-4040

205 CARRIER ROLLERS5ZF

(PER MACHINE) QUANTITY PART NUMBERGroup 4 6K-9880Components of GroupRoller Shell 1 9W-6174Shaft 1 6K-9861Cup 2 1M-8736Cone 2 1M-8735Ring 1 1M-7914Cover 1 3K-6638Collar Assembly 1 1M-7918Bolt 3 0L-1351Seal – Duo-Cone Group 2 9W-5224Toric Ring (9) 2 1M-3097


641

205205 CARRIER ROLLERS5ZF(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERSeal – Cover 1 5H-8848Seal – Shaft 1 1H-9696Seal – Plug 1 1S-8947Plug 1 2P-0347Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 5K-6191Toric Ring (10) 2 2S-2181

205 CARRIER ROLLERS3HC, 4DC

(PER MACHINE) QUANTITY PART NUMBERGroup 4 8E-7494 (11)

205 CLASSIC CARRIER ROLLERS3HC, 4DC


205 TRACK ROLLERS3HC, 4DC, 5ZF

(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) 14 8E-7494Components of GroupRoller Shell (SF) 1 8E-7496Bearing (12) 2 8E-0645Shaft 1 9W-2143End Collar 2 9W-2144Pin 2 9W-2145Seal – Duo-Cone Group 2 9W-2142Toric Ring (12) 2 8H-2265Seal – Shaft O-Ring 2 7F-8268Plug 1 9W-2146Mounting Hardware (13)

Bolt 4 0L-1169Washer 4 2S-5658

10 Component of preceding assembly or group.11 This is Track Roller Gp; refer to 205 track roller section for serviceable components.12 Component of preceding assembly or group; quantity shown is per assembly or group.13 These components are not included in the roller group; quantities shown are required to mount each roller.

642

205205 TRACK ROLLERS3HC, 4DC, 5ZF(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERSpecial Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 8S-5656Toric Ring (14) 2 8S-5653

205 CLASSIC TRACK ROLLERS3HC, 4DC, 5ZF



205 TRACK GUIDING GUARDS5ZF

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 8U-1692Bolt 16 6V-4429Washer 16 3B-4510

205 TRACK GUIDING GUARDS3HC, 4DC

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 5W-3915Bolt 16 6V-4429Washer 16 3B-4510

14 Component of preceding assembly or group; quantity shown is per assembly or group.15 These components are not included in the roller group; quantities shown are required to mount each roller.

643

211211B TRACK

6XG6.75" (171.5 mm) PITCH – 5/8" BOLT




211B CLASSIC GREASED TRACK6XG

6.75" (171.5 mm) PITCH – 5/8" BOLT

QUANTITY PART NUMBERLink Assembly – 51 Section 2 290-3449Components of Link AssemblyTrack LinksRH Regular 51 289-9337LH Regular 51 289-9338Other ComponentsPin 50 290-3453Master Pin 1 290-3456Bushing 50 290-3454Master Bushing 1 290-3457Seal 100 290-3455Spacer 2 290-3458Track Hardware (2)

1 Service replaced by Classic link assembly 290-34492 Not part of link assembly; required to assemble track group.

644

211211B CLASSIC GREASED TRACK6XG6.75" (171.5 mm) PITCH – 5/8" BOLT(Cont'd.)

QUANTITY PART NUMBERBolt 204 175-8552Nut 204 200-9150

211 TRACK4EC, 5CC

6.75" (171.5 mm) PITCH – 16 mm BOLTQUANTITY UNSEALED PART NUMBER

Link Assembly – 51 Section 2 5W-9836 (3)


Bolt 204 3Y-4297Bolt (5) 204 7H-3597Nut 204 1M-1408

211 TRACK4EC, 5CC

6.75" (171.5 mm) PITCH – 14 mm BOLT


Components of Link AssemblyTrack LinksRH Regular 51 5W-4147LH Regular 51 5W-4146Other ComponentsPin 50 5W-4149Master Pin 1 5W-4151Bushing 50 5W-4148

3 Link assembly provided on Made As Ordered (MAO) basis only; individual components are directly serviced.4 Not part of link assembly; required to assemble track group.5 Required for 35" (889 mm) and 39" (990 mm).6 Link Assembly no longer serviced.

645

211211 TRACK4EC, 5CC6.75" (171.5 mm) PITCH – 14 mm BOLT(Cont'd.)

QUANTITY UNSEALED PART NUMBERMaster Bushing 1 5W-4150Spacer 2 5W-4152Track Hardware (7)

Bolt 204 7H-3596Nut 204 7H-3606

211B TRACK SHOES6.75" (171.5 mm) PITCH – 5/8" BOLT

TYPE WIDTH PART NUMBERTriple Grouser 23.6" (600 mm) 8E-3332Classic Triple Grouser 23.6" (600 mm) 175-8184Triple Grouser 29.5" (750 mm) 8E-3333Triple Grouser 35.4" (900 mm) 8E-3334Triple Grouser 39.4" (1000 mm) 8E-3335





211B, 211 CLASSIC SPROCKETS4EC, 5CC,6XG

(PER SIDE) QUANTITY PART NUMBERSprocket (23 Teeth) 1 322-6236Bolt 16 8T-0281

211B, 211 IDLERS6XG

(PER SIDE) QUANTITY PART NUMBERComponents of GroupIdler Assembly 1 9W-8045


646

211211B, 211 IDLERS6XG(Cont'd.)(PER SIDE) QUANTITY PART NUMBERBearing (8) 2 8E-0645Shaft 1 9W-2143Bearing Block 2 9C-2498Seal – Duo-Cone Group 2 9W-2142Toric Ring (8) 2 8H-2265Seal – Shaft O-Ring 2 7F-8268Plug 1 7H-3171Pin 2 9W-2145Ring 1 1H-8397Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 8S-5656Toric Ring (8) 2 8S-5653

211 IDLERS4EC, 5CC


211B CARRIER ROLLERS6XG

(PER MACHINE) QUANTITY PART NUMBERGroup 4 6K-9880Components of GroupRoller Shell 1 9W-6174Shaft 1 6K-9861Cup 2 1M-8736Cone 2 1M-8735Ring 1 1M-7914Cover 1 3K-6638Collar Assembly 1 1M-7918


647

211211B CARRIER ROLLERS6XG(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERBolt 3 0L-1351Seal – Duo-Cone Group 2 9W-5224Toric Ring (9) 2 1M-3097Seal – Cover 1 5H-8848Seal – Shaft 1 1H-9696Seal – Plug 1 1S-8947Plug 1 2P-0347Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 5K-6191Toric Ring (9) 2 2S-2181

211 CARRIER ROLLERS4EC, 5CC


211 CLASSIC CARRIER ROLLERS4EC, 5CC


211B, 211 TRACK ROLLERS(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) 20 8E-7494Components of GroupRoller Shell (SF) 1 8E-7496Bearing (11) 2 8E-0645Shaft 1 9W-2143End Collar 2 9W-2144Pin 2 9W-2145Seal – Duo-Cone Group 2 9W-2142Toric Ring (11) 2 8H-2265Seal – Shaft O-Ring 2 7F-8268Plug 1 9W-2146

9 Component of preceding assembly or group.10 This is Track Roller Gp; refer to 211 track roller section for serviceable components.11 Component of preceding assembly or group; quantity shown is per assembly or group.

648

211211B, 211 TRACK ROLLERS (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERMounting Hardware (12)

Bolt 4 0L-1169Washer 4 2S-5658Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 8S-5656Toric Ring (13) 2 8S-5653

211B, 211 CLASSIC TRACK ROLLERS(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) 20 175-8185Mounting Hardware (12)


211B TRACK GUIDING GUARDS6XG


211 TRACK GUIDING GUARDS4EC, 5CC



649

213213 TRACK

1EJ6.75" (171.5 mm) PITCH – 5/8" BOLT




213 CLASSIC GREASED TRACK1EJ

6.75" (171.5 mm) PITCH – 5/8" BOLT

QUANTITY PART NUMBERLink Assembly – 51 Section 2 290-3449Components of Link AssemblyTrack LinksRH Regular 51 289-9337LH Regular 51 289-9338Other ComponentsPin 50 290-3453Master Pin 1 290-3456Bushing 50 290-3454Master Bushing 1 290-3457Seal 100 290-3455Spacer 2 290-3458Track Hardware (2)

Bolt 204 175-8552

1 Serviced replaced by Classic Link Assembly 290-34492 Not part of link assembly; required to assemble track group.

650

213213 CLASSIC GREASED TRACK1EJ6.75" (171.5 mm) PITCH – 5/8" BOLT(Cont'd.)

QUANTITY PART NUMBERNut 204 200-9150Special GroupPin and Bushing Group (38 Sections) 1 1V-8623Pin and Bushing Group (38 Sections) 1 1V-8623

213 TRACK1EJ

6.75" (171.5 mm) PITCH – 16 mm BOLT



Bolt 204 3Y-4297Bolt (5) 204 7H-3597Nut 204 1M-1408

213 TRACK3ZC, 9XB

6.75" (171.5 mm) PITCH – 14 mm BOLT

UNSEALED PART NUMBER 42 SECTION 51 SECTIONLink Assembly (Quantity 2) – (6) – (6)

Components of Link AssemblyTrack LinksRH Regular 5W-4147 42 51LH Regular 5W-4146 42 51Other Components

3 Link Assembly provided on Made As Ordered (MAO) basis only; Individual components are directly serviced.4 Not part of link assembly; required to assemble track group.5 Required for 35" (889 mm) and 39" (990 mm)6 Link assembly no longer serviced.

651

213213 TRACK3ZC, 9XB6.75" (171.5 mm) PITCH – 14 mm BOLT(Cont'd.)

UNSEALED PART NUMBER 42 SECTION 51 SECTIONPin 5W-4149 41 50Master Pin 5W-4151 1 1Bushing 5W-4148 41 50Master Bushing 5W-4150 1 1Spacer 5W-4152 2 2Track Hardware (7)

Bolt 7H-3596 168 204Nut 7H-3606 168 204

213 TRACK SHOES1EJ

6.75" (171.5 mm) PITCH – 5/8" BOLT

TYPE WIDTH PART NUMBERTriple Grouser 23.6" (600 mm) 8E-3332Classic Triple Grouser 23.6" (600 mm) 175-8184Triple Grouser 29.5" (750 mm) 8E-3333Triple Grouser 35.4" (900 mm) 8E-3334Triple Grouser 39.4" (1000 mm) 8E-3335

213 TRACK SHOES1EJ

6.75" (171.5 mm) PITCH – 16 mm BOLT


213 TRACK SHOES3ZC, 9XB

6.75" (171.5 mm) PITCH – 14 mm BOLT


213 CLASSIC SPROCKETS1EJ

(PER SIDE) QUANTITY PART NUMBERSprocket (23 Teeth) 1 322-6236


652

213213 IDLERS

1EJ (LATER MODELS)

(PER SIDE) QUANTITY PART NUMBERComponents of GroupIdler Assembly 1 9W-8045Bearing (8) 2 8E-0645Shaft 1 9W-2143Bearing Block 2 9C-2498Seal – Duo-Cone Group 2 9W-2142Toric Ring (8) 2 8H-2265Seal – Shaft O-Ring 2 7F-8268Plug 1 7H-3171Pin 2 9W-2145Ring 1 1H-8397Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 8S-5656Toric Ring (8) 2 8S-5653

213 IDLERS1EJ (EARLY MODELS), 3ZC, 9XB


213 CARRIER ROLLERS1EJ

(PER MACHINE) QUANTITY PART NUMBERGroup 4 6K-9880Components of GroupRoller Shell 1 9W-6174Shaft 1 6K-9861Cup 2 1M-8736Cone 2 1M-8735Ring 1 1M-7914Cover 1 3K-6638


653

213213 CARRIER ROLLERS1EJ(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERCollar Assembly 1 1M-7918Bolt 3 0L-1351Seal – Duo-Cone Group 2 9W-5224Toric Ring (9) 2 1M-3097Seal – Cover 1 5H-8848Seal – Shaft 1 1H-9696Seal – Plug 1 1S-8947Plug 1 2P-0347Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 5K-6191Toric Ring (9) 2 2S-2181

213 CARRIER ROLLERS1EJ (EARLY MODELS), 3ZC, 9XB


213 CLASSIC CARRIER ROLLERS1EJ (EARLY MODELS), 3ZC, 9XB


213 TRACK ROLLERS(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) 20 8E-7494Components of GroupRoller Shell (SF) 1 8E-7496Bearing (11) 2 8E-0645Shaft 1 9W-2143End Collar 2 9W-2144Pin 2 9W-2145Seal – Duo-Cone Group 2 9W-2142Toric Ring (11) 2 8H-2265Seal – Shaft O-Ring 2 7F-8268Plug 1 9W-2146

9 Component of preceding assembly or group10 Track Roller; refer to 213 track roller section for serviceable components.11 Component of preceding assembly or group; quantity shown is per assembly or group.

654

213213 TRACK ROLLERS (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERMounting Hardware (12)


213 CLASSIC TRACK ROLLERSQUANTITY PART NUMBER

Single Flange (SF) 20 175-8185Mounting Hardware (12)


213 TRACK GUIDING GUARDS1EJ


213 TRACK GUIDING GUARDS1EJ (EARLY MODELS), 3ZC, 9XB



655

215215 TRACKLONG PIN

(44 SECTION & 51 SECTION): 14Z761-UP, 2XC, 4HG, 57Y2031-UP, 9TF, 9YB6.75" (171.5 mm) PITCH – 5/8" BOLTSEALED PART NUMBER 44 SECTION 51 SECTION

Link Assembly – (Quantity 2) – (1) 6T-0511 (2)

Components of Link AssemblyTrack LinksRH Master 9K-0029 1 1LH Master 9K-0028 1 1RH Regular 9K-6629 43 50LH Regular 9K-6628 43 50Other ComponentsPin 9K-4060 43 50Master Pin 9K-4062 1 1Bushing 9K-4061 43 50Master Bushing 7K-2020 1 1Seal (Spring Washer) 7K-2018 176 204Spacer 9K-4059 2 2Track Hardware (3)

Bolt 7H-3597 176 204Nut 1M-1408 176 204Special GroupPin and Bushing Group (38 Sections) 1V-8623 1 1

215 CLASSIC GREASED TRACKLONG PIN

(44 SECTION & 51 SECTION): 14Z761-UP, 2XC, 4HG, 57Y2031-UP, 9TF, 9YB6.75" (171.5 mm) PITCH – 5/8" BOLT

PART NUMBER 44 SECTION 51 SECTIONLink Assembly – 51 Section – (4) – (5) 290-3449 (5)

Components of Link AssemblyTrack LinksRH Regular 289-9337 44 51LH Regular 289-9338 44 51Other ComponentsPin 290-3453 43 50Master Pin 290-3456 1 1Bushing 290-3454 43 50

1 For Sealed & Lubricated Track, order 40 Section (154-3657) Link Assembly and add appropriate number of sections, also requires order-ing a master shoe. OR Classic offering, order 47 section Classic Link Assembly 290-3449 and remove 3 sections.

2 6T-0511 serviced replaced with Classic Link Assembly 290-3449.3 Not part of link assembly; required to assemble track group.4 Order 47 section Classic Link Assembly 290-3449 and remove 3 sections.5 For Sealed & Lubricated Track, order 40 Section (154-3657) Link Assembly and add appropriate number of sections, also requires order-

ing a master shoe.

656

215215 CLASSIC GREASED TRACKLONG PIN(44 SECTION & 51 SECTION): 14Z761-UP, 2XC, 4HG, 57Y2031-UP, 9TF, 9YB6.75" (171.5 mm) PITCH – 5/8" BOLT(Cont'd.)

PART NUMBER 44 SECTION 51 SECTIONMaster Bushing 290-3457 1 1Seal 290-3455 88 100Spacer 290-3458 2 2Track Hardware (6)

Bolt 175-8552 176 204Nut 200-9150 176 204Special GroupPin and Bushing Group (38 Sections) 1V-8623 1 1

215 TRACKSHORT PIN

(44 & 51 SECTION): 14Z432-7606.75" (171.5 mm) PITCH – 5/8" BOLTSEALED PART NUMBER 44 SECTION 51 SECTION

Link Assembly (Quantity 2) – 5C-0949 (7)

Components of Link AssemblyTrack LinksRH Master 9K-0029 1 1LH Master 9K-0028 1 1RH Regular 9K-6629 43 50LH Regular 9K-6628 43 50Other ComponentsPin 3A-4133 43 50Master Pin 3A-4132 1 1Bushing 3A-4131 43 50Master Bushing 5C-4088 1 1Seal (Spring Washer) 7K-2018 176 204Spacer 9K-4059 2 2Track Hardware (6)

Bolt 7H-3597 176 204Nut 1M-1408 176 204

6 Not part of link assembly; required to assemble track group.7 Serviced replaced by Classic Link Assembly 290-3452.

657

215215 CLASSIC GREASED TRACK

SHORT PIN(44 & 51 SECTIONS): 14Z432-7606.75" (171.5 mm) PITCH – 5/8" BOLT

SEALED PART NUMBER 44 SECTION 51 SECTIONLink Assembly – 51 Section – 290-3452Components of Link AssemblyTrack LinksRH Regular 289-9337 43 51LH Regular 289-9338 43 51Other ComponentsPin 290-3459 43 50Master Pin 290-3461 1 1Bushing 290-3460 43 50Master Bushing 290-3462 1 1Seal 290-3455 88 100Spacer 290-3458 2 2Track Hardware (8)

Bolt 175-8552 176 204Nut 200-9150 176 204

215 TRACK(44 & 51 SECTION): 14Z1-431, 57Y1-2030, 96L

6.75" (171.5 mm) PITCH – 9/16" BOLT

SEALED PART NUMBER 44 SECTION 51 SECTIONLink Assembly (Quantity 2) 6A-4713 5C-4089Components of Link AssemblyTrack LinksRH Regular 7K-1825 44 51LH Regular 7K-1826 44 51Other ComponentsPin 5C-4095 43 50Master Pin 5C-4092 1 1Bushing 5C-4094 43 50Master Bushing 5C-4088 1 1Seal (Spring Washer) 7K-2018 176 204Spacer 7K-2016 2 2Track Hardware (8)

Bolt 4K-7038 176 204Nut 7K-2017 176 204


658

215215 TRACK SHOES

FOR USE WITH 6T0511 LINK ASSEMBLY AND CLASSIC 290-3449 LINK ASSEMBLY6.75" (171.5 mm) PITCH – 5/8" BOLT

TYPE WIDTH CLASSIC PART NUMBER PART NUMBERModerate Service 24.0" (610 mm) – 1V-7069Triple Grouser 19.7" (500 mm) 175-8789 6T-0513Triple Grouser 23.6" (600 mm) 175-8184 8E-3332Triple Grouser 28.0" (710 mm) 175-8811 6T-0517Triple Grouser 39.4" (1000 mm) – 8E-3335

215 TRACK SHOESFOR USE WITH CLASSIC 290-3452 LINK ASSEMBLY

6.75" (171.5 mm) PITCH – 5/8" BOLT

TYPE WIDTH PART NUMBERTriple Grouser 19.7" (500 mm) 3T-3648Triple Grouser 24.0" (610 mm) 3T-3647Triple Grouser 27.8" (705 mm) 3T-3646


TYPE WIDTH PART NUMBERTriple Grouser 19.7" (500 mm) 3A-4129Triple Grouser 24.0" (610 mm) 5C-0768Triple Grouser 27.8" (705 mm) 6A-7527

215 CLASSIC SPROCKETS14Z761-UP, 2XC, 4HG, 57Y2031-UP, 9TF, 9YB

(PER SIDE) QUANTITY PART NUMBERSprocket Assembly (23 Teeth) 1 322-6302

Rim (23 Teeth) 1 3T-9153 (9)

215 CLASSIC SPROCKETS14Z1-760, 57Y1-2030, 96L

(PER SIDE) QUANTITY PART NUMBERSprocket Assembly (23 Teeth) 1 322-6304

Rim (23 Teeth) 1 3T-9154

9 Optional Classic service replacement 322-6303

659

215215 IDLERS

14Z761-UP, 2XC, 4HG, 57Y2031-UP, 9TF, 9YB

(PER SIDE) QUANTITY PART NUMBERIdler Group 2 8V-9106Components of GroupIdler Assembly 1 8E-8907Bushing Assembly (10) 2 1V-9611Bearing (10) 1 7K-1089Shaft 1 8V-4714Bearing Block 2 8V-4713Seal – Duo-Cone Group 2 9W-5224Toric Ring (10) 2 1M-3097Seal – Bushing O-Ring 2 1H-8128Seal – Shift O-Ring 2 7F-8267Bolt 12 9B-7237Washer 12 8T-4896Plug 1 6Y-0473Stopper 1 7G-4332Lock 2 5M-5000Bolt 2 7X-0318Washer 2 7X-0563Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 5K-6191Toric Ring (10) 2 2S-2181

215 IDLERS14Z1-760, 57Y1-2030, 96L

(PER SIDE) QUANTITY PART NUMBERComponents of GroupIdler Assembly 1 5C-6602Bushing Assembly (10) 2 3A-4790Shaft 1 6A-4725Washer Thrust 2 5C-4314Bearing Block 2 8V-2695Seal – Duo-Cone Group 2 216-2957Toric Ring (10) 2 216-2956Seal – Shaft O-Ring 2 1H-9696Plug 1 9F-2247Lock 2 5M-5000Bolt 2 7X-0318Washer 2 7X-0563Special Application Seals (Low/High Temperature)


660

215215 IDLERS14Z1-760, 57Y1-2030, 96L(Cont'd.)(PER SIDE) QUANTITY PART NUMBERSeal – Duo-Cone Group 2 5K-6191Toric Ring (11) 2 2S-2181

215 CARRIER ROLLERS14Z761-UP, 2XC, 4HG, 57Y2031-UP, 9TF, 9YB

(PER MACHINE) QUANTITY PART NUMBERGroup 4 6K-9880Components of GroupRoller Shell 1 9W-6174Shaft 1 6K-9861Cup 2 1M-8736Cone 2 1M-8735Ring 1 1M-7914Cover 1 3K-6638Collar Assembly 1 1M-7918Bolt 3 0L-1351Plate 1 6K-9860Bolt 2 6V-4791Seal – Duo-Cone Group 2 9W-5224Toric Ring (12) 2 1M-3097Seal – Cover 1 5H-8848Seal – Shaft 1 1H-9696Seal – Plug 1 1S-8947Plug 1 2P-0347Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 5K-6191Toric Ring (12) 2 2S-2181

215 CARRIER ROLLERS14Z1-760, 57Y1-2030, 96L

(PER MACHINE) QUANTITY PART NUMBERGroup 4 3T-4618Components of GroupRoller Shell 1 3T-4617Shaft 1 6K-9861Cup 2 1M-8736Cone 2 1M-8735


661

215215 CARRIER ROLLERS14Z1-760, 57Y1-2030, 96L(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERRing 1 1M-7914Cover 1 4H-9527Collar Assembly 1 1M-7918Bolt 5 0S-0509Plate 1 6K-9860Bolt 2 6V-4791Seal – Duo-Cone Group 2 9W-5224Toric Ring (13) 2 1M-3097Seal – Cover 1 4H-9628Seal – Shaft 1 1H-9696Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 5K-6191Toric Ring (13) 2 2S-2181

215 TRACK ROLLERS4HG, 9TF, 9YB1037-UP

(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) 20 8E-7494 (14)

Components of GroupRoller Shell (SF) 1 8E-7496Bearing (15) 2 8E-0645Shaft 1 9W-2143End Collar 2 9W-2144Pin 2 9W-2145Seal – Duo-Cone Group 2 9W-2142Toric Ring (15) 2 8H-2265Seal – Shaft O-Ring 2 7F-8268Plug 1 9W-2146Mounting Hardware (16)


13 Component of preceding assembly or group.14 Excavator style roller; roller can be retrofited to earlier models using 118-1608 rollers; some guiding guard modification will be required.15 Component of preceding assembly or group; quantity shown is quantity per assembly or group.16 These components are not included in the roller group; quantities shown are required to mount each roller.

662

215215 CLASSIC TRACK ROLLERS

4HG, 9TF, 9YB1037-UP

QUANTITY PART NUMBERSingle Flange (SF) 20 175-8185Mounting Hardware (17)


215 TRACK ROLLERS14Z761-UP, 2XC, 57Y2031-UP, 9TF, 9YB1-1036

(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) 20 118-1608Components of GroupRoller Shell (SF) 1 9P-7782Bushing Assembly 2 1V-9611Bearing (18) 1 7K-1089Shaft 1 118-1610 (19)

End Collar 2 118-1616 (20)

Ring 2 6H-7382Bolt 12 2P-3201Seal – Duo-Cone Group 2 9W-5224Toric Ring (18) 2 1M-3097Seal – Bushing O-Ring 2 1H-8128Seal – Shaft O-Ring 2 7F-8267Plug 1 6Y-0473Stopper 1 7G-4332Mounting Hardware (17)

Bolt 4 1A-1135Washer 4 5P-8247Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 5K-6191Toric Ring (18) 2 2S-2181

215 TRACK ROLLERS14Z1-760, 57Y1-2030, 96L

(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) 16 (21) 281-8339Components of Group

17 These components are not included in the roller group; quantities shown are required to mount each roller.18 Component of preceding assembly or group; quantity shown is quantity per assembly or group.19 Replaces former 3K-6616 shaft; requires 2-118-1616 end collars20 If 3K-6616 shaft is used, use 2–5K-7187 end collars.21 20 required for long roller frame arrangement.

663

215215 TRACK ROLLERS14Z1-760, 57Y1-2030, 96L(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERRoller Shell (SF) 1 6S-7038Bushing Assembly 2 6S-3495Bearing (22) 1 6Y-4744Shaft 1 6S-3171End Collar 2 3T-4283Ring 2 6S-3172Thrust Washer 2 6S-7715Seal – Duo-Cone Group 2 216-2957Toric Ring (22) 2 216-2956Seal – Shaft O-Ring 2 7D-9749Plug 1 9F-2247Mounting Hardware (23)

Bolt 4 0S-1585Washer 4 2M-0849Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 5P-0373Toric Ring (22) 2 3N-3095

215 CLASSIC TRACK ROLLERS14Z1-760, 57Y1-2030, 96L

QUANTITY PART NUMBERSingle Flange (SF) 16 (24) 275-3579Mounting Hardware (23)

Bolt 4 0S-1585Washer 4 2M-0849

215 TRACK GUIDING GUARDS (SEGMENTED)14Z761-UP, 2XC, 4HG, 57Y2031-UP, 9TF, 9YB

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 8V-8691Bolt 8 8T-6871Washer 8 8T-4122Spacer 8 9M-7783

22 Component of preceding assembly or group; quantity shown is quantity per assembly or group.23 These components are not included in the roller group; quantities shown are required to mount each roller.24 20 required for long roller frame arrangement.

664

215215 TRACK GUIDING GUARDS (SEGMENTED)

14Z1-760, 57Y1-2030, 96L

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 5C-8823Bolt 8 8T-6871Washer 8 8T-4122Spacer 8 9M-7783

215 TRACK ROLLER GUARDSFULL LENGTH ONE PIECE

14Z761-UP, 2XC, 4HG, 57Y2031-UP, 9TF, 9YB

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 3V-8998Bolt 28 7X-0366Bolt 14 031-9099Washer 56 8T-4994Nut 14 6V-8182Spacer 14 3V-9002

215 TRACK ROLLER GUARDSFULL LENGTH TWO PIECE

14Z761-UP, 2XC, 4HG, 57Y2031-UP, 9TF, 9YB

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 8V-3506Guard Assembly 4 8V-3507Bolt 36 0S-1625Bolt 18 4B-7572Washer 36 5P-8247Washer 36 5P-8249Nut 18 1A-5666Spacer 36 9M-7783Tube 18 8V-3502

665

215SA, 219, 225215SA, 219, 225 TRACK

2SJ, 2ZD550-UP, 3YD, 4FC736-UP, 5CF, 5XG, 6RG7.50" (190.5 mm) PITCH – 3/4" BOLT

SEALED PART NUMBER 43 SECTION 49 SECTIONLink Assembly (Quantity 2) – – (1)

Components of Link AssemblyTrack LinksRH Regular 7T-4043 (2) 49 49LH Regular 7T-4044 (3) 49 49Other ComponentsPin 6Y-8186 48 48Master Pin 6Y-8185 1 1Bushing 5S-0710 48 48Master Bushing 5S-0753 1 1Seal (Spring Washer) 5S-0709 172 172Spacer 5S-0754 2 2Track Hardware (4)

Bolt 1S-1859 172 172Nut 1S-1860 172 172

215SA, 219, 225 CLASSIC GREASED TRACK2SJ, 2ZD550-UP, 3YD, 4FC736-UP, 5CF, 5XG, 6RG

7.50" (190.5 mm) PITCH – 3/4" BOLT

PART NUMBER 43 SECTION 49 SECTIONLink Assembly – (Quantity 2) – (5) 289-4948 (5)

Components of Link AssemblyTrack LinksRH Regular 289-4951 43 49LH Regular 289-4952 43 49Other ComponentsPin 175-8923 42 48Master Pin 289-4954 1 1Bushing 289-4955 42 48Master Bushing 289-4956 1 1Seal Grease 289-0646 86 98Spacer 289-4957 (6) 2 2Track Hardware (4)

Bolt 188-5633 172 196Nut 188-5856 172 196

1 Service replaced by Classic link assembly 289-49482 Service Replaced by 289-4951.3 Service Replaced by 289-4952.4 Not part of link assembly; required to assemble track group.5 Order 289-4948 (49 section link assembly) and remove 6 sections.6 Service replaced by 158-4381.

666

215SA, 219, 225215SA, 225 TRACK

2ZD1-549, 4JC, 51U2832-UP, 76U1649-UP, 4FC1-7356.91" (175.5 mm) PITCH – 5/8" BOLT

SEALED PART NUMBER 46 SECTION 53 SECTIONLink Assembly – 46 Section – – (7)

Components of Link AssemblyTrack LinksRH Master 3P-7155 1 1LH Master 3P-7156 1 1RH Regular 3P-7153 45 52LH Regular 3P-7154 45 52Other ComponentsPin 6B-5502 45 52Master Pin 8M-7456 1 1Bushing 5S-0710 45 52Master Bushing 5S-0753 1 1Seal (Spring Washer) 5S-0709 184 212Spacer 5S-0754 2 2Track Hardware (8)

Bolt 7H-3597 184 212Nut 1M-1408 184 212Special GroupPin and Bushing Group (38 Sections) 6P-4234 1 1

215SA, 225 CLASSIC GREASED TRACK2ZD1-549, 4JC, 51U2832-UP, 76U1649-UP, 4FC1-735

6.91" (175.5 mm) PITCH – 5/8" BOLT

PART NUMBER 46 SECTION 53 SECTIONLink Assembly – (Quantity 2) – – (9) 289-4946 (9)

Components of Link AssemblyTrack LinksRH Regular 289-4949 46 53LH Regular 289-4950 46 53Other ComponentsPin 175-8923 45 52Master Pin 289-4954 1 1Bushing 289-4955 45 52Master Bushing 289-4956 1 1Seal Grease 289-0646 92 106Spacer 289-4957 (10) 2 2

7 Service replaced by Classic Link Assembly 289-4946.8 Not part of link assembly; required to assemble track group.9 Order 289-4946 (53 section link assembly) and remove 7 sections.10 Service replaced by 158-4381.

667

215SA, 219, 225215SA, 225 CLASSIC GREASED TRACK2ZD1-549, 4JC, 51U2832-UP, 76U1649-UP, 4FC1-7356.91" (175.5 mm) PITCH – 5/8" BOLT(Cont'd.)

PART NUMBER 46 SECTION 53 SECTIONTrack Hardware (11)

Bolt 175-8552 184 212Nut 200-9150 184 212

225 TRACK51U1-2831, 76U1-1648

6.75" (171.5 mm) PITCH – 5/8" BOLT

SEALED PART NUMBER 47 SECTION 54 SECTIONLink Assembly – 47 Section 8K-0323 (12) 8K-4699 (13)

Components of Link AssemblyTrack LinksRH Master 9K-0029 1 1LH Master 9K-0028 1 1RH Regular 9K-6629 46 53LH Regular 9K-6628 46 53Other ComponentsPin 9K-4060 46 53Master Pin 9K-4062 1 1Bushing 9K-4061 46 53Master Bushing 7K-2020 1 1Seal (Spring Washer) 7K-2018 188 216Spacer 9K-4059 2 2Track Hardware (11)

Bolt 7H-3597 188 216Nut 1M-1408 188 216Special GroupPin and Bushing Group (38 Sections) 1V-8623 1 1

225 CLASSIC GREASED TRACK51U1-2831, 76U1-1648

6.75" (171.5 mm) PITCH – 5/8" BOLT


Components of Link AssemblyTrack Links

11 Not part of link assembly; required to assemble track group.12 Serviced replaced by Classic link assembly 290-3450.13 Serviced replaced by Classic link assembly 290-3451.14 For Sealed & Lubricated Track, order 40 section (154-3657) Link Assembly and add appropriate number of sections. Requires ordering a

master shoe.

668

215SA, 219, 225225 CLASSIC GREASED TRACK51U1-2831, 76U1-16486.75" (171.5 mm) PITCH – 5/8" BOLT(Cont'd.)

PART NUMBER 47 SECTION 54 SECTIONRH Regular 289-9337 47 54LH Regular 289-9338 47 54Other ComponentsPin 290-3453 46 53Master Pin 290-3456 1 1Bushing 290-3454 46 53Master Bushing 290-3457 1 1Seal Grease 290-3455 94 108Spacer 290-3458 2 2Track Hardware (15)

Bolt 175-8552 188 216Nut 200-9150 188 216

215SA, 219, 225 TRACK SHOES7.50" (190.5 mm) PITCH – 3/4" BOLT

TYPE WIDTH PART NUMBERModerate Service 28.0" (710 mm) 6Y-2040Triple Grouser 21.7" (550 mm) 9W-6728Triple Grouser 26.0" (660 mm) 9W-6726Triple Grouser 30.0" (760 mm) 9W-6727Triple Grouser 34.0" (860 mm) 7Z-8877

215SA, 225 TRACK SHOES6.91" (175.5 mm) PITCH – 5/8" BOLT

(PER MACHINE) WIDTH PART NUMBERTriple Grouser 21.7" (550 mm) 3V-9489Triple Grouser (Center Punched Slots) 24.0" (610 mm) 1N-9701Triple Grouser 30.0" (760 mm) 3V-9114

215SA, 225 TRACK SHOES6.75" (171.5 mm) PITCH – 5/8" BOLT

(PER MACHINE) WIDTH PART NUMBERTriple Grouser 24.0" (610 mm) 8K-8305Triple Grouser 30.0" (760 mm) 8K-2271


669

215SA, 219, 225215SA, 219, 225 SPROCKETS

2SJ, 2ZD550-UP, 3YD, 4FC736-UP, 5CF, 5XG, 6RG7.50" (190.5 mm) PITCH – 3/4" BOLT

(PER SIDE) QUANTITY PART NUMBERClassic Sprocket Assembly (21 Teeth) 1 289-9674

Rim (21 Teeth) 1 8E-9805 (16)

215SA, 225 SPROCKETS2ZD1-549, 4FC418-735, 8YD, 8XD, 51U5853-UP, 76U5466-UP

6.91" (175.5 mm) PITCH – 5/8" BOLT

(PER SIDE) QUANTITY PART NUMBERClassic Sprocket Assembly (23 Teeth) 1 322-6376 (17)

Rim (23 Teeth) 1 3T-9152 (18)

215, 225 SPROCKETS51U1-2831, 76U1-1648

6.75" (171.5 mm) PITCH – 5/8" BOLT

(PER SIDE) QUANTITY PART NUMBERSprocket Assembly (23 Teeth) 1 3V-1727Rim (23 Teeth) 1 3T-9153 (19)

215SA, 219, 225 IDLERS2SJ, 2ZD, 3YD, 4FC, 4JC, 51U2832-UP, 5CF, 5XG, 6RG, 76U1649-UP, 8YD

(PER MACHINE) QUANTITY PART NUMBERIdler Group 2 4C-2084Components of GroupIdler Assembly 1 3V-5131Bushing Assembly 2 3P-8272Bearing (20) 1 8P-6652Shaft 1 5K-0305Bearing Block 2 3V-5073Seal – Duo-Cone Group 2 9W-5224Toric Ring (20) 2 1M-3097Seal – Bushing O-Ring 2 1H-6227Seal – Shaft O-Ring 2 7F-8267Bolt 12 8T-2502Washer 12 8T-4896Plug 1 2P-0347

16 Classic optional service replacement 286-9821. See IRM UC96-24 for additional information.17 For the following serial number machines 4JC, 4FC1-417, 51U2832-5852, 76U1649-5465, New sprocket mounting components will be re-

quired to upgrade to this sprocket assembly, refer to IRM UC85-18.18 Canceled Replaced by - 322-6377.19 Optional Classic service replacement 322-630320 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

670

215SA, 219, 225215SA, 219, 225 IDLERS2SJ, 2ZD, 3YD, 4FC, 4JC, 51U2832-UP, 5CF, 5XG, 6RG, 76U1649-UP, 8YD(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERPin 2 5M-5000Bolt 2 7X-0311Washer 2 7X-0563Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 5K-6191Toric Ring (21) 2 2S-2181

215SA, 225 IDLERS51U1-2831, 76U1-1648

(PER MACHINE) QUANTITY PART NUMBERComponents of GroupIdler Assembly 1 8E-8907Bushing Assembly 2 1V-9611Bearing (21)

Shaft 1 4K-9984Bearing Block 2 8K-0321Seal – Duo-Cone Group 2 9W-5224Toric Ring (21)

Seal – Bushing O-Ring 2 1H-8128Seal – Shaft O-Ring 2 4F-7952Bolt 12 0S-1588Washer 12 3B-4506Plug 1 2P-0347Pin 2 5M-5000Bolt 2 0T-0319Washer 2 4K-9943Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 5K-6191Toric Ring (21) 2 2S-2181

215SA, 219, 225 CARRIER ROLLERS2SJ, 2ZD, 3YD, 4FC, 4JC, 51U2832-UP, 5CF, 5XG, 6RG, 76U1649-UP, 8YD

(PER MACHINE) QUANTITY PART NUMBERGroup 4 5A-8374 (22)

Components of GroupRoller Shell 1 5A-8375Shaft 1 3T-3207

21 Component of preceding assembly or group; quantity shown is quantity per assembly or group.22 Optional Classic service replacement 200-9185.

671

215SA, 219, 225215SA, 219, 225 CARRIER ROLLERS2SJ, 2ZD, 3YD, 4FC, 4JC, 51U2832-UP, 5CF, 5XG, 6RG, 76U1649-UP, 8YD(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERCup 2 9S-3581Cone 2 9S-3582Ring 1 1M-7914Cover 1 5M-2043Collar 1 9S-3567Plug 1 2P-0347Bolt 3 0S-1594Plate 1 8P-6188Bolt 2 5K-9107Seal – Duo-Cone Group 1 6Y-0925Toric Ring (23) 2 8H-2262Seal – Cover 1 2H-6338Seal – Shaft O-Ring 1 1H-9696Seal – Plug 1 1S-8947Special Application SealsSeal – Duo-Cone Group (Steel Mill) 1 4S-8984Toric Ring (23) 2 9M-9730

215SA, 225 CARRIER ROLLERS51U1-2831, 76U1-1648

(PER MACHINE) QUANTITY PART NUMBERGroup 4 6K-9880Components of GroupRoller Shell 1 9W-6174Shaft 1 6K-9861Cup 2 1M-8736Cone 2 1M-8735Ring 1 1M-7914Cover 1 3K-6638Collar 1 1M-7918Plug 1 2P-0347Bolt 3 0L-1351Plate 1 6K-9860Bolt 2 6V-4791Seal – Duo-Cone Group 1 9W-5224Toric Ring (23) 2 1M-3097Seal – Cover 1 5H-8848Seal – Shaft O-Ring 1 1H-9696

23 Component of preceding assembly or group.

672

215SA, 219, 225215SA, 225 CARRIER ROLLERS51U1-2831, 76U1-1648(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERSeal – Plug 1 1S-8947Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 1 5K-6191Toric Ring (24) 2 2S-2181

215SA, 219, 225 TRACK ROLLERS2SJ, 2ZD550-UP, 3YD, 5CF, 5XG, 6RG

(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) 16 (25) 8E-4573 (26)

Components of GroupRoller Shell (SF) 1 8E-4574Shaft 1 9W-3198End Collar 2 8E-5467Pin 2 9W-2204Seal – Duo-Cone Group 2 9W-2201Toric Ring (27) 2 6H-1309Seal – Shaft O-Ring 2 1H-5728Plug 1 9W-2146Mounting Hardware (28)

Bolt 4 7F-5227Washer 4 5P-8248Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 3P-1848Toric Ring (27) 2 3P-1847Seal – Shaft O-Ring 2 8M-4395

215SA, 225 TRACK ROLLERS2ZD1-549, 4FC351-UP, 51U6255-UP, 76U5159-UP, 8YD

(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) 16 (25) 8E-5745 (26)

Components of GroupRoller Shell (SF) 1 8E-4574Shaft 1 9W-2202End Collar 2 8E-5468

24 Component of preceding assembly or group.25 20 required for long roller frame machines.26 Excavator style roller.27 Component of preceding assembly or group; quantity shown is quantity per assembly or group.28 These components are not included in the roller group; quantities shown are required to mount each roller.

673

215SA, 219, 225215SA, 225 TRACK ROLLERS2ZD1-549, 4FC351-UP, 51U6255-UP, 76U5159-UP, 8YD(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERPin 2 9W-2204Seal – Duo-Cone Group 2 9W-2201Toric Ring (29) 2 6H-1309Seal – Shaft O-Ring 2 1H-5728Plug 1 9W-2146Mounting Hardware (30)

Bolt 4 0L-1169Washer 4 5P-8247Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 3P-1848Toric Ring (29) 2 3P-1847Seal – Shaft O-Ring 2 8M-4395

215SA, 225 CLASSIC TRACK ROLLERS4FC1-350, 4JC, 51U2832-6254, 76U1649-5158

(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) 16 (31) 175-8024Mounting Hardware (30)

Bolt 4 8S-9092Washer 4 5P-8247

215SA, 225 TRACK ROLLERS4FC1-350, 4JC, 51U2832-6254, 76U1649-5158

(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) 16 (31) 118-1611 (32)

Components of GroupRoller Shell (SF) 1 9S-9535 (33)



Ring 2 6H-7382Bolt 12 2P-3201

29 Component of preceding assembly or group; quantity shown is quantity per assembly or group.30 These components are not included in the roller group; quantities shown are required to mount each roller.31 20 required for long roller frame machines.32 Serviced Replaced By: 1 - Roller Group (SF) 310-4912, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247. OR Classic optional

service replacement 175-8024.33 Serviced Replaced By: 1 - Roller Group (SF) 310-4912, 2 - End Cap 223-9110, 4 - Bolt 1B-4367, 4 - Washer 5P-8247.34 If 5M-1915 shaft is used, use 1 - 5M-0627 and 1 - 1M-3812 end collar.

674

215SA, 219, 225215SA, 225 TRACK ROLLERS4FC1-350, 4JC, 51U2832-6254, 76U1649-5158(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERSeal – Duo-Cone Group 2 9W-5224Toric Ring (35) 2 1M-3097Seal – Bushing O-Ring 2 1H-6227Seal – Shaft O-Ring 2 7F-8267Stopper 1 7G-4332Plug 1 6Y-0473Mounting Hardware (36)

Bolt 4 8S-9092Washer 4 5P-8247Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 5K-6191Toric Ring (35) 2 2S-2181Seal – Bushing O-Ring 2 5K-1770Seal – Shaft O-Ring 2 8M-5661

215SA, 225 TRACK ROLLERS51U1-2831, 76U1-1648

(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) 16 (37) 118-1608Components of GroupRoller Shell (SF) 1 9P-7782Bushing Assembly 2 1V-9611Bearing (35) 1 7K-1089Shaft 1 118-1610 (38)

End Collar 2 118-1616 (39)


35 Component of preceding assembly or group; quantity shown is quantity per assembly or group.36 These components are not included in the roller group; quantities shown are required to mount each roller.37 20 required for long roller frame machines.38 Replaces former 3K-6616 shaft, requires 2 - 118-1616 end collars.39 If 3K-6616 shaft is used, use 2 - 5K-7187 end collars.

675

215SA, 219, 225215SA, 225 TRACK ROLLERS51U1-2831, 76U1-1648(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERBolt 4 1A-1135Washer 4 5P-8247Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 5K-6191Toric Ring (40) 2 2S-2181Seal – Bushing O-Ring 2 5K-1770Seal – Shaft O-Ring 2 8M-5661

215SA, 219, 225 TRACK GUIDING GUARDS (SEGMENTED)2SJ, 2ZD, 3YD, 4FC, 4JC, 51U2832-UP, 5CF, 5XG, 6RG, 76U1649-UP, 8YD

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 3V-9091Bolt 8 1A-8063Washer 8 8T-4994Spacer 8 4F-6568

215SA, 225 TRACK GUIDING GUARDS (SEGMENTED)51U1-2831, 76U1-1648

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 8K-4444Bolt 8 0S-1625Bolt 16 0S-1595Washer 8 4D-3704Washer 8 7D-1649Spacer 8 9M-7783Bar 4 8K-4438

215SA, 219, 225 TRACK ROLLER GUARDSFULL LENGTH, SHORT UNDERCARRIAGE

2SJ, 2ZD, 3YD, 4FC, 4JC, 51U2832-UP, 5CF, 5XG, 6RG, 76U1649-UP, 8YD



676

215SA, 219, 225215SA, 219, 225 TRACK ROLLER GUARDS

FULL LENGTH, LONG UNDERCARRIAGE2SJ, 2ZD, 3YD, 4FC, 4JC, 51U2832-UP, 5CF, 5XG, 6RG, 76U1649-UP, 8YD


215SA, 225 TRACK ROLLER GUARDSFULL LENGTH, SHORT UNDERCARRIAGE

51U1-2831, 76U1-1648

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 3V-4745Guard Assembly 2 3V-4746Bolt 36 1A-1135Bolt 14 2P-9845Washer 28 2S-0115Washer 36 4D-3704Nut 14 1B-4207Spacer 14 3V-4764

215SA, 225 TRACK ROLLER GUARDSFULL LENGTH, LONG UNDERCARRIAGE

51U1-2831, 76U1-1648

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 3V-5029Guard Assembly 2 3V-5030Bolt 44 1A-1135Bolt 18 2P-9845Washer 36 2S-0115Washer 44 4D-3704Nut 18 1B-4207Spacer 18 3V-4764

677

225SA, FB227, 229, 231225SA, FB227, 229, 231 TRACK*

HYBRID LINKS10W, 1AG, 1GF, 1NK, 2LJ, 51U, 5WJ, 76U8.00" (203.2 mm) PITCH – 3/4" BOLT

QUANTITY SEALED PART NUMBERLink Assembly – 47 Section 2 238-9956 (1)

Components of Link AssemblyTrack LinksRH Master 1 240-2503LH Master 1 240-2504RH Regular 46 228-2735LH Regular 46 228-2736Other ComponentsPin 46 4M-5989Master Pin 1 8E-0855Bushing (72.75 mm OD) 46 237-7305Master Bushing 1 237-7306Seal (Spring Washer) 188 8M-7231Spacer 2 8M-7290Track Hardware (2)

Bolt 188 1S-1859Nut 188 1S-1860* The 231 Excavator (Serial No. "1NK") use a 54 section link assembly, order 238-9958. Also see note 2 regarding hybrid link assembly and sprocket to use.

225SA, FB227, 229, 231 TRACK*10W, 1AG, 1GF, 1NK, 2LJ, 51U, 5WJ, 76U8.00" (203.2 mm) PITCH – 3/4" BOLT

(PER MACHINE) QUANTITY SEALED PART NUMBERLink Assembly – 47 Section 2 8E-4713 (3)

Components of Link AssemblyTrack LinksRH Master 1 6P-6129LH Master 1 6P-6130RH Regular 46 3P-1112LH Regular 46 3P-1113Other ComponentsPin 46 4M-5989

1 Hybrid link assembly can only be used with a worn (current rim part number 9M-3818) sprocket, or new (new rim part number 246-5228)sprocket. The following sprockets part numbers are for NON-CATERPILLAR machines (321-6319 with 23 teeth and 20 mounting boltholes, 321-6320 with 23 teeth and 24 mounting bolts) see IRM UC08-13 Media No.PELJ0928 for models the sprockets can be used on.

2 Not part of link assembly: required to assemble track group.3 Service replaced by 238-9956 hybrid link assembly. Hybrid link assembly can only be used with a worn (current rim part number 9M-

3818) sprocket, or new (new rim part number 246-5228) sprocket. Optional Service Replacement by 288-3705 Classic link assembly. If re-placing sprocket use 289-2207 Classic sprocket. The following sprockets part numbers are for NON-CATERPILLAR machines (321-6319with 23 teeth and 20 mounting bolt holes, 321-6320 with 23 teeth and 24 mounting bolts) see IRM UC08-13 Media No.PELJ0928 for modelsthe sprockets can be used on.

678

225SA, FB227, 229, 231225SA, FB227, 229, 231 TRACK*10W, 1AG, 1GF, 1NK, 2LJ, 51U, 5WJ, 76U8.00" (203.2 mm) PITCH – 3/4" BOLT(Cont'd.)(PER MACHINE) QUANTITY SEALED PART NUMBERMaster Pin 1 8E-0855Bushing (66.6 mm OD) 46 4M-5991Master Bushing 1 4M-5992Seal (Spring Washer) 188 8M-7231Spacer 2 8M-7290Track Hardware (4)

Bolt 188 1S-1859Nut 188 1S-1860* The 231 Excavator (Serial No. "1NK") use a 54 section link assembly, order 238-9958. Also see note 2 regarding hybrid link assembly and sprocket to use.

225SA, FB227, 229, 231 CLASSIC GREASED TRACK10W, 1AG, 1GF, 1NK, 2LJ, 51U, 5WJ, 76U8.00" (203.2 mm) PITCH – 3/4" BOLT


Components of Link AssemblyTrack LinksRH Regular 47 289-0631LH Regular 47 289-0632Other ComponentsPin 46 175-8929Master Pin 1 289-0639Bushing (66.6 mm OD) 46 289-0641Master Bushing 1 289-0643Seal Grease 92 289-0645Spacer 2 289-0647Track Hardware (4)

Bolt 188 188-5633Nut 188 188-5856

FB227 TRI-LINK TRACK8.00" (203.2 mm) PITCH – 3/4" BOLT

QUANTITY PART NUMBERLink Assembly – 47 Section 2 238-9956Components of Outrigger Chain (Serviced individually; quanti-ties shown are per machine) (6)

4 Not part of link assembly: required to assemble track group.5 If installing new sprocket rim use 289-2207 Classic sprocket.6 Outrigger chains consist of D6H components: refer to shoe section for special tri-track shoes.

679

225SA, FB227, 229, 231FB227 TRI-LINK TRACK8.00" (203.2 mm) PITCH – 3/4" BOLT(Cont'd.)

QUANTITY PART NUMBERTrack LinksRH Regular 47 8E-2355LH Regular 47 8E-2356Other ComponentsStub Pin 94 106-8237Stub Bushing 94 6Y-1348Track Hardware (quantities shown are per machine) (7)

Bolt (Center Chain) 188 1S-1859Bolt (Tri) 188 6V-1792Nut 376 1S-1860

225SA, FB227, 229, 231 TRACK SHOES8.00" (203.2 mm) PITCH – 3/4" BOLT

TYPE WIDTH PART NUMBERExtreme Service (8) 22.0" (560 mm) 6Y-6411Extreme Service 24.0" (610 mm) 6Y-6398Extreme Service (Clipped Grouser, Trapezoidal Opening) (8) 24.0" (610 mm) 3Q-5391Extreme Service 30.0" (760 mm) 6Y-6405Double Grouser 21.7" (550 mm) 8E-4496Tri-Extreme Service (Off-set RH) (9) 28.0" (710 mm) 1Q-4717Tri-Extreme Service (Off-set LH) (9) 28.0" (710 mm) 1Q-4718

225SA, FB227, 229, 231 CLASSIC TRACK SHOES8.00" (203.2 mm) PITCH – 3/4" BOLT

TYPE WIDTH PART NUMBERExtreme Service 22.0" (560 mm) 188-5397Extreme Service 24.0" (610 mm) 188-5593Extreme Service (Clipped Grouser, Trapezoidal Opening) 24.0" (610 mm) 292-5634Extreme Service (Clipped Grouser) 28.0" (710 mm) 288-6679Extreme Service 30.0" (760 mm) 290-9938Double Grouser 21.0" (533 mm) 188-5383Double Grouser 28.0" (710 mm) 289-5117Triple Grouser (Center Punched Slots) 23.6" (600 mm) 290-9940Triple Grouser (Center Punched Slots) 28.0" (710 mm) 290-9941Triple Grouser (Center Punched Slots) 32.0" (810 mm) 288-6678Triple Grouser (Center Punched Slots) 36.0" (915 mm) 290-9942

7 Not part of link assembly; required to assemble track group.8 With moderate service heat treat specifications9 FB227 machine option.

680

225SA, FB227, 229, 231225SA, FB227, 229, 231 SPROCKETS

10W, 1AG, 1GF, 1NK, 2LJ, 51U2832-UP, 5WJ, 76U1649-UP

(PER SIDE) QUANTITY PART NUMBERSprocket Assembly (25 Teeth) (Not for use with hybrid links) 1 5V-4969Rim (25 Teeth) 1 246-5228

225SA SPROCKETS51U1-2831, 76U1-1648

(PER MACHINE) QUANTITY PART NUMBERSprocket Assembly (25 Teeth) (Not for use with hybrid links) 1 289-2206

Rim (25 Teeth) 1 246-5228

225SA, FB227, 229, 231 CLASSIC SPROCKETS10W, 1AG, 1GF, 1NK, 2LJ, 51U, 5WJ, 76U

TO BE USED ONLY WITH CLASSIC LINK ASSEMBLY(PER SIDE) QUANTITY PART NUMBERRim (25 Teeth) 1 289-2207

225SA, FB227, 229, 231 IDLERS10W, 1AG, 1GF, 1NK, 2LJ, 51U, 5WJ, 76U

(PER SIDE) QUANTITY PART NUMBERComponents of GroupIdler Assembly 1 8E-6135 (10)

Bushing Assembly 2 3P-8432Bearing (11) 1 8P-6651Shaft 1 2V-8627 (10)

Bearing Block 2 9C-4224 (10)

Seal – Duo-Cone Group 2 6Y-0925Toric Ring (11) 2 8H-2262Seal – Bushing O-Ring 2 4H-9105Seal – Shaft O-Ring 2 8F-6711Seal – Plug 1 1S-8947Bolt 12 9B-7237Washer 12 8T-4896Plug 1 2P-0347Pin 2 5M-5000Bolt 2 7X-0313Washer 2 7X-0563Special Application SealsSeal – Duo-Cone Group (Steel Mill) 2 4S-8984Toric Ring (11) 2 9M-9730

10 Service Replaced by Classic Idler Group part number 288-3691.11 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

681

225SA, FB227, 229, 231225SA, FB227, 229, 231 CLASSIC IDLERS

10W, 1AG, 1GF, 1NK, 2LJ, 51U, 5WJ, 76U

(PER SIDE) QUANTITY PART NUMBERIdler Group (Includes Bearing Blocks) 1 288-3691

225SA, FB227, 229, 231 CARRIER ROLLERS10W, 1AG, 1GF, 1NK, 2LJ, 51U, 5WJ, 76U

(PER MACHINE) QUANTITY PART NUMBERGroup 4 3T-3206 (12)

Components of GroupRoller Shell 1 9S-8320Shaft 1 3T-3207Cup 2 9S-3581Cone 2 9S-3582Ring 1 1M-7914Cover 1 5M-2043Collar 1 9S-3567Plug 1 2P-0347Bolt 3 0S-1594Seal – Duo-Cone Group 2 6Y-0925Toric Ring (13) 2 8H-2262Seal – Cover 1 2H-6338Seal – Shaft O-Ring 1 1H-9696Seal – Plug 1 1S-8947

225SA, FB227, 229, 231 CLASSIC CARRIER ROLLERS10W, 1AG, 1GF, 1NK, 2LJ, 51U, 5WJ, 76U


225SA, FB227, 229, 231 TRACK ROLLERSEXCAVATOR STYLE ROLLER

10W343-UP, 1AG, 1GF, 1NK, 2LJ, 5WJ, 76U6074-UP

(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) 16 8E-4576 (14)

Components of GroupRoller Shell (SF) 1 8E-4577Bearing (15) 1 9W-3359Shaft 1 9W-4962

12 Optional Service Replaced by Classic Carrier Group part number 188-5590.13 Component of preceding assembly or group.14 Optional Service Replacement by Classic Roller Group part number 288-3690.15 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

682

225SA, FB227, 229, 231225SA, FB227, 229, 231 TRACK ROLLERSEXCAVATOR STYLE ROLLER10W343-UP, 1AG, 1GF, 1NK, 2LJ, 5WJ, 76U6074-UP(Cont'd.)(PER MACHINE) QUANTITY PART NUMBEREnd Collar 2 9W-4961Pin 2 9W-4960Seal – Duo-Cone Group 2 9W-2201Toric Ring (16) 2 6H-1309Seal – Shaft O-Ring 2 1H-7339Plug 1 9W-2146Mounting Hardware (17)

Bolt 4 3B-2968Washer 4 5P-8248

225SA, FB227, 229, 231 CLASSIC TRACK ROLLERS10W343-UP, 1AG, 1GF, 1NK, 2LJ, 5WJ, 76U6074-UP


Bolt 4 3B-2968Washer 4 5P-8248

225SA, FB227 STANDARDIZED TRACK ROLLERS10W216-342, 51U, 76U1-6073





FB227, STANDARDIZED TRACK ROLLERS10W1-215





683

225SA, FB227, 229, 231FB227, STANDARDIZED TRACK ROLLERS10W1-215(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERCap 2 317-9078Bolt (5/8") 4 1D-4585Washer 2 2S-0736

225SA, FB227 TRACK ROLLERS10W216-342, 51U, 76U1-6073

(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) 16 118-1617 (18)

Components of GroupRoller Shell (SF) 1 9G-8027 (19)



Ring (Lock) 2 5M-4443Bolt 12 2P-3201Seal – Duo-Cone Group 2 6Y-0925Toric Ring (20) 2 8H-2262Seal – Bushing O-Ring 2 2H-3928Seal – Shaft O-Ring 2 5F-8000Stopper 1 7G-4332Plug 1 6Y-0473Mounting Hardware (23)

Bolt 4 1D-4608Washer 4 5H-1504

225SA, FB227 CLASSIC TRACK ROLLERS10W216-342, 51U, 76U1-6073


18 Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-9079, 4 - Bolt 1D-4610, 4 - Washer 5P-8248. Optional Service Re-placed by Classic Track Roller Group part number 188-5272.

19 Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-9079, 4 - Bolt 1D-4610, 4 - Washer 5P-8248.20 Component of preceding assembly or group; quantity shown is quantity per assembly or group.21 Replaces former 7G-0419 shaft, requires 2, 7G-0418 end collars. Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-

9079, 4 - Bolt 1D-4610, 4 - Washer 5P-8248.22 If 7G-0419 shaft is used, use 1 - 7G-0418 and 1 - 7G-0417 end collar.23 These components are not included in the roller group; quantities shown are required to mount each roller.

684

225SA, FB227, 229, 231225SA, FB227 CLASSIC TRACK ROLLERS10W216-342, 51U, 76U1-6073(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERBolt 4 1D-4608Washer 4 5H-1504

FB227 TRACK ROLLERS10W1-215


Components of GroupRoller Shell (SF) 1 6Y-2902 (25)



Ring (Lock) 2 5M-4443Bolt 12 2P-3201Seal – Duo-Cone Group 2 6Y-0925Toric Ring (26) 2 8H-2262Seal – Bushing O-Ring 2 2H-3928Seal – Shaft O-Ring 2 5F-8000Stopper 1 7G-4332Plug 1 6Y-0473Mounting Hardware (29)

Bolt 4 1A-8537Washer 4 2S-0736

FB227 CLASSIC TRACK ROLLERS10W1-215


Bolt 4 1A-8537Washer 4 2S-0736

24 Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-9078, 4 - Bolt 1D-4585, 4 - Washer 2S-0736. Optional Service Re-placed by Classic Track Roller Group part number 175-8035.

25 Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-9078, 4 - Bolt 1D-4585, 4 - Washer 2S-0736.26 Component of preceding assembly or group; quantity shown is quantity per assembly or group.27 Replaces former 7G-0419 shaft, requires 2, 7G-0418 end collars. Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-

9078, 4 - Bolt 1D-4585, 4 - Washer 2S-0736.28 If 5M-4448 shaft is used, use 1 - 5M-4436 and 1 - 5M-4435 end collar.29 These components are not included in the roller group; quantities shown are required to mount each roller.

685

225SA, FB227, 229, 231225SA, FB227, 229, 231 TRACK GUIDING GUARDS (SEGMENTED)

1AG, 1GF, 1NK, 51U, 5WJ, 76U

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 4E-2887Bolt 4 1A-8063Spacer 4 4F-6568Bolt 12 7X-0403Washer 12 7X-0529

225SA, FB227, 229, 231 TRACK ROLLER GUARDSFULL LENGTH

10W, 1AG, 1GF, 1NK, 2LJ, 51U, 5WJ, 76U

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 6W-1029Guard Assembly 2 6W-1030Guard Assembly 2 6W-1031Guard Assembly 2 6W-1032Tube 14 8V-9129Bolt 14 6M-2001Nut 14 2J-3507Bolt 40 8S-9093Washer 68 7X-0529

686

235235 TRACK

SHORT1FD, 32K1301-UP, 3WG, 4ED, 5AF, 64R596-UP, 7WC, 81X, 83X, 9PC

8.50" (215.9 mm) PITCH – 7/8" BOLT

QUANTITYFORMER SEALEDPART NUMBER

SEALEDPART NUMBER

Link Assembly – 49 Section 2 – (1) 8E-8643 (2)

Components of Link AssemblyTrack LinksRH Regular 49 7T-9823 130-5333LH Regular 49 7T-9824 130-5334Other ComponentsPin 48 8E-4272 8E-4272Master Pin 1 8E-4273 8E-4273Bushing 48 1M-3669 1M-3669Master Bushing 1 1M-3670 1M-3670Seal (Spring Washer) 196 8M-6239 8M-6239Spacer 2 8M-6238 8M-6238Track Hardware (3)

Bolt 196 7H-3599 5P-4028Nut 196 7T-9825 7T-9825

235 TRACKLONG

1FD, 32K1301-UP, 3WG, 4ED, 5AF, 64R596-UP, 7WC, 8KJ, 8TJ, 81X, 83X, 9PC8.50" (215.9 mm) PITCH – 7/8" BOLT

(PER MACHINE) QUANTITYFORMER SEALEDPART NUMBER

SEALEDPART NUMBER

Link Assembly – 53 Section 2 – (4) 8E-8644 (5)

Components of Link AssemblyTrack LinksRH Regular 53 7T-9823 130-5333LH Regular 53 7T-9824 130-5334Other ComponentsPin 52 8E-4272 8E-4272Master Pin 1 8E-4273 8E-4273Bushing 52 1M-3669 1M-3669Master Bushing 1 1M-3670 1M-3670Seal (Spring Washer) 212 8M-6239 8M-6239Spacer 2 8M-6238 8M-6238Track Hardware (3)

1 Upgrade to 49 Section 8E-8643 Link Assembly.2 Serviced Replaced by Classic Grease Link Assembly part number 288-5754.3 Not part of link assembly; required to assemble track group.4 Upgrade to 53 Section 8E-8644 Link Assembly.5 Serviced Replaced by Classic Grease Link Assembly part number 288-5755.

687

235235 TRACKLONG1FD, 32K1301-UP, 3WG, 4ED, 5AF, 64R596-UP, 7WC, 8KJ, 8TJ, 81X, 83X, 9PC8.50" (215.9 mm) PITCH – 7/8" BOLT(Cont'd.)

(PER MACHINE) QUANTITYFORMER SEALEDPART NUMBER

SEALEDPART NUMBER

Bolt 212 7H-3599 5P-4028Nut 212 7T-9825 7T-9825

235 CLASSIC GREASE TRACK1FD, 32K1301-UP, 3WG, 4ED, 5AF, 64R596-UP, 7WC, 8KJ, 8TJ, 81X, 83X, 9PC

8.50" (215.9 mm) PITCH – 7/8" BOLT

PART NUMBER 49 SECTION 53 SECTIONLink Assembly (Quantity 2) 288-5754 288-5755Components of Link AssemblyTrack LinksRH Regular 289-0635 49 53LH Regular 289-0636 49 53Other ComponentsPin 289-0638 48 52Master Pin 289-0640 1 1Bushing 289-0642 48 52Master Bushing 289-0644 1 1Seal Grease 267-3878 96 104Spacer 289-0648 2 2Track Hardware (6)

Bolt 5P-4028 196 212Nut 7T-9825 196 212

235 CLASSIC GREASE TRACKFD, 32K1301-UP, 3WG, 4ED, 5AF, 64R596-UP, 7WC, 81X, 83X, 9PC

8.50" (215.9 mm) PITCH – 3/4" BOLT


Components of Link AssemblyTrack LinksRH Regular 49 289-0633LH Regular 49 289-0634Other ComponentsPin 48 289-0638Master Pin 1 289-0640Bushing 48 289-0642

6 Not part of link assembly; required to assemble track group7 If 53 section link assembly is required, order 288-3694 link assembly and add 4 sections.

688

235235 CLASSIC GREASE TRACKFD, 32K1301-UP, 3WG, 4ED, 5AF, 64R596-UP, 7WC, 81X, 83X, 9PC8.50" (215.9 mm) PITCH – 3/4" BOLT(Cont'd.)

QUANTITY PART NUMBERMaster Bushing 1 289-0644Seal Grease 96 267-3878Spacer 2 289-0648Track Hardware (8)

Bolt 196 188-5636Nut 196 188-5856

235 TRACKHYBRID LINKS

32K1301-UP, 3WG, 4ED, 5AF, 64R596-UP, 7WC, 81X, 83X, 9PC8.50" (215.9 mm) PITCH – 3/4" BOLT


Components of Link AssemblyTrack LinksRH Regular 49 233-0385LH Regular 49 233-0386Other ComponentsPin 48 8E-4272Master Pin 1 8E-4273Bushing 48 247-1475Master Bushing 1 247-1476Seal (Spring Washer) 196 8M-6239Spacer 2 8M-6238Track Hardware (8)

Bolt 196 7H-3598Nut 196 1S-1860

235 TRACK(49 & 53 SECTION): 1FD, 32K1301-UP, 3WG, 4ED, 5AF, 64R596-UP, 7WC, 81X, 83X, 9PC

8.50" (215.9 mm) PITCH – 3/4" BOLT

SEALED PART NUMBER 49 SECTION 53 SECTIONLink Assembly – (Quantity 2) 8E-4275 (10) – (11)

Components of Link Assembly

8 Not part of link assembly; required to assemble track group9 If installing new track replacement sprocket rim, use 248-2041 sprocket rim.10 Service replaced by 246-5810 link assembly. If installing new track replacement sprocket rim, use new 248-2041 sprocket rim. Optional

Service Replaced by Classic Grease Link Assembly part number 288-3694, to be used with Classic Sprocket part number 289-2211. ForSealed & Lubricated Track, order 49 Section (239-6883) Link Assembly; requires 30" double grouser master shoe (8E-4431). For applica-tion restrictions, refer to IRM UC86-41.

11 Order 246-5810 link assembly and add 4 sections. If installing new track replacement sprocket rim, use new 248-2041 sprocket rim.

689

235235 TRACK(49 & 53 SECTION): 1FD, 32K1301-UP, 3WG, 4ED, 5AF, 64R596-UP, 7WC, 81X, 83X, 9PC8.50" (215.9 mm) PITCH – 3/4" BOLT(Cont'd.)

SEALED PART NUMBER 49 SECTION 53 SECTIONTrack LinksRH Regular 8S-2589 49 53LH Regular 8S-2590 49 53Other ComponentsPin 8E-4272 48 52Master Pin 8E-4273 1 1Bushing 1M-3669 48 52Master Bushing 1M-3670 1 1Seal (Spring Washer) 8M-6239 196 212Spacer 8M-6238 2 2Track Hardware (12)

Bolt 7H-3598 196 212Nut 1S-1860 196 212

235 TRACK32K1-1300, 64R1-595

8.00" (203.2 mm) PITCH – 3/4" BOLT

SEALED PART NUMBER 47 SECTION 54 SECTIONLink Assembly – (Quantity 2) 8E-4713 (13) 8E-4714 (14)

Components of Link AssemblyTrack LinksRH Master 6P-6129 1 1LH Master 6P-6130 1 1RH Regular 3P-1112 46 53LH Regular 3P-1113 46 53Other ComponentsPin 4M-5989 46 53Master Pin 8E-0855 1 1Bushing 4M-5991 46 53Master Bushing 4M-5992 1 1Seal (Spring Washer) 8M-7231 188 216Spacer 8M-7290 2 2

12 Not part of link assembly; required to assemble track group.13 Service replaced by 238-9956 hybrid link assembly. Hybrid link assembly can only be used with a worn (current rim part number 9M-

3818) sprocket, or new (new rim part number 246-5228) sprocket. Optional Service Replaced by Classic Grease Link Assembly part num-ber 288-3705, if installing new sprocket rim use 289-2207 Classic sprocket. For Sealed & Lubricated Track, order a 41 section 236-9866Link Assembly and add appropriate number of sections.

14 Service replaced by 238-9958 hybrid link assembly. Hybrid link assembly can only be used with a worn (current rim part number 9M-3818) sprocket, or new (new rim part number 246-5228) sprocket. Optional Service Replaced by Classic Grease Link Assembly part num-ber 288-3693, if installing new sprocket rim use 289-2207 Classic sprocket. For Sealed & Lubricated Track, order a 41 section 236-9866Link Assembly and add appropriate number of sections.

690

235235 TRACK32K1-1300, 64R1-5958.00" (203.2 mm) PITCH – 3/4" BOLT(Cont'd.)

SEALED PART NUMBER 47 SECTION 54 SECTIONTrack Hardware (15)

Bolt 1S-1859 188 216Nut 1S-1860 188 216


TYPE WIDTH PART NUMBERDouble Grouser 24.0" (610 mm) 8E-4427Triple Grouser 36.0" (915 mm) 9W-6484

235 CLASSIC TRACK SHOES8.50" (215.9 mm) PITCH 7/8 BOLT

(TYPE) WIDTH PART NUMBERModerate Service (Clipped Grouser) (Trap Opening) 28.0" (710 mm) 288-6668Double Grouser 18.0" (460 mm) 288-6669Double Grouser 24.0" (610 mm) 288-6670Double Grouser 30.0" (760 mm) 288-6671Triple Grouser (Center Punched Slots) 29.5" (750 mm) 288-6672Triple Grouser (Center Punched Slots) 36.0" (915 mm) 288-6673


TYPE WIDTH PART NUMBERDouble Grouser 18.0" (460 mm) 8E-4434Triple Grouser 30.0" (760 mm) 3N-0837

235 CLASSIC TRACK SHOES8.50" (215.9 mm) PITCH 3/4" BOLT

(TYPE) WIDTH PART NUMBERDouble Grouser 18.0" (460 mm) 188-5263Double Grouser 24.0" (610 mm) 288-6676Double Grouser 30.0" (760 mm) 288-6677Triple Grouser (Center Punched Slots) 25.6" (650 mm) 175-8839Triple Grouser (Center Punched Slots) 30.0" (760 mm) 175-8838Triple Grouser (Center Punched Slots) 36.0" (915 mm) 288-6681


691

235235 CLASSIC TRACK SHOES8.00" (203.2 mm) PITCH –3/4" BOLT

(TYPE) WIDTH PART NUMBERExtreme Service 22.0" (560 mm) 188-5397Extreme Service 24.0" (610 mm) 188-5593Extreme Service (Clipped Grouser, Trapezoidal Opening) 24.0" (610 mm) 292-5634Extreme Service (Clipped Grouser) 28.0" (710 mm) 288-6679Extreme Service 30.0" (760 mm) 290-9938Double Grouser 21.0" (533 mm) 188-5383Double Grouser 28.0" (710 mm) 289-5117Triple Grouser (Center Punched Slots) 23.6" (600 mm) 290-9940Triple Grouser (Center Punched Slots) 28.0" (710 mm) 290-9941Triple Grouser (Center Punched Slots) 32.0" (810 mm) 288-6678Triple Grouser (Center Punched Slots) 36.0" (915 mm) 290-9942

235 SPROCKETS1FD, 32K1301-UP, 3WG, 4ED, 5AF, 64R596-UP, 7WC, 8KJ, 8TJ, 81X, 83X, 9PC

8.50" (215.9 mm) PITCH

(PER MACHINE) QUANTITY PART NUMBERSprocket Assembly (24 Teeth) (Not for use with hybrid links) 1 3V-4527Rim (24 Teeth) 1 248-2041

235 CLASSIC SPROCKETS1FD, 32K1301-UP, 3WG, 4ED, 5AF, 64R596-UP, 7WC, 8KJ, 8TJ, 81X, 83X, 9PC

8.50" (215.9 mm) PITCH

(PER SIDE) QUANTITY PART NUMBERRim (24 Teeth) 1 289-2211

235 SPROCKETS32K1-1300, 64R1-5958.00" (203.2 mm) PITCH


235 CLASSIC SPROCKETS32K1-1300, 64R1-5958.00" (203.2 mm) PITCH

(PER SIDE) QUANTITY PART NUMBERSprocket Assembly (25 Teeth) (Not for use with Hybrid links) 1 289-2206

Rim (25 Teeth) 1 289-2207

692

235235 IDLERS

1FD, 2PG, 32K1301-UP, 3WG, 4DG, 4ED, 5AF, 64R596-UP, 7WC, 8KJ, 8TJ, 81X, 83X, 9PC

(PER MACHINE) QUANTITY PART NUMBERIdler Group 2 4E-8500 (16)


Bushing Assembly 2 117-3068 (16)

Bearing (17) 2 8P-6651Shaft 1 8E-7232 (16)

Bearing Block 2 4E-8505 (16)

Seal – Duo-Cone Group 2 6Y-0925Toric Ring (17) 2 8H-2262Seal – Bushing O-Ring 2 4H-9105Seal – Shaft O-Ring 2 1H-5728Seal – Plug 1 1S-8947Bolt 12 9B-7237Washer 12 8T-4896Plug 1 2P-0347Pin 2 5M-5000Bolt 2 7X-0313Washer 2 7X-0563Special Application SealsSeal – Duo-Cone Group (Steel Mill) 2 4S-8984Toric Ring (17) 2 9M-9730

235 CLASSIC IDLERS1FD, 2PG, 32K1301-UP, 3WG, 4DG, 4ED, 5AF, 64R596-UP, 7WC, 8KJ, 8TJ, 81X, 83X, 9PC

(PER MACHINE) QUANTITY PART NUMBERIdler Group (Includes Bearing Blocks) 2 288-3691

235 IDLERS32K944, 32K1024-1300

(PER SIDE) QUANTITY PART NUMBERComponents of GroupIdler Assembly 1 8E-6135 (16)

Bushing Assembly 2 3P-8432Bearing (17) 2 8P-6651Shaft 1 2V-8627 (16)

Bearing Block 2 9C-4224Seal – Duo-Cone Group 2 6Y-0925

16 Service Replaced by Classic Idler Group part number 288-3691.17 Component of preceding assembly or group; quantity shown is quantity per assembly

693

235235 IDLERS32K944, 32K1024-1300(Cont'd.)(PER SIDE) QUANTITY PART NUMBERToric Ring (18) 2 8H-2262Seal – Bushing O-Ring 2 4H-9105Seal – Shaft O-Ring 2 8F-6711Seal – Plug 1 1S-8947Bolt 12 9B-7237Washer 12 8T-4896Plug 1 2P-0347Pin 2 5M-5000Bolt 2 7X-0313Washer 2 7X-0563Special Application SealsSeal – Duo-Cone Group (Steel Mill) 2 4S-8984Toric Ring (18) 2 9M-9730

235 IDLERS32K1-943, 32K945-1023, 64R1-595

(PER SIDE) QUANTITY PART NUMBERComponents of GroupIdler Assembly 1 5M-5009 (19)

Bushing Assembly 2 3P-1900Bearing (18) 2 8P-5197Shaft 1 5M-5005Bearing Block 2 2V-1221Seal – Duo-Cone Group 2 6Y-0925Toric Ring (18) 2 8H-2262Seal – Bushing O-Ring 2 1H-6227Seal – Shaft O-Ring 2 5F-8000Seal – Plug 1 1S-8947Bolt 12 0S-1588Washer 12 3B-4506Plug 1 2P-0347Pin 2 5M-5000Bolt 2 7X-0313Washer 2 7X-0563Special Application SealsSeal – Duo-Cone Group (Steel Mill) 2 4S-8984Toric Ring (18) 2 9M-9730

18 Component of preceding assembly or group; quantity shown is quantity per assembly19 Optional Service Replaced by Classic Idler Assembly part number 175-8263.

694


1FD, 2PG, 32K1301-UP, 3WG, 4DG, 4ED, 5AF, 64R596-UP, 7WC, 81X, 83X, 8KJ, 8TJ, 9PC


Components of GroupRoller Shell 1 1P-8716Shaft 1 1P-8715Cup 2 9S-3581Cone 2 9S-3582Ring 1 7H-4574Cover 1 5M-2043Collar Assembly 1 7H-4571Plug 1 2P-0347Bolt 3 0S-1594Plate 1 8P-6188Bolt 2 6V-4791Seal – Duo-Cone Group 1 6Y-0925Toric Ring (21) 2 8H-2262Seal – Cover 1 2H-6338Seal – Plug 1 1S-8947Seal – Shaft O-Ring 1 1H-8720Special Application GroupsGroup (Steel Mill) 4 2P-3514Seal – Duo-Cone Group (Steel Mill) 1 4S-8984Toric Ring (21) 2 9M-9730Seal–Cover (Steel Mill) 1 2P-3538Seal–Shaft (Steel Mill) 1 1S-2174Group (Arctic) 4 255-8882


235 CLASSIC CARRIER ROLLERS1FD, 2PG, 32K1301-UP, 3WG, 4DG, 4ED, 5AF, 64R596-UP, 7WC, 81X, 83X, 8KJ, 8TJ, 9PC


20 Optional Service Replaced by Classic Carrier Roller Group part number 188-5600.21 Component of preceding group; quantity shown is the quantity per group.

695


32K1-1300, 64R1-595

(PER MACHINE) QUANTITY PART NUMBERGroup 4 3T-3206 (22)

Components of GroupRoller Shell 1 9S-8320Shaft 1 3T-3207Cup 2 9S-3581Cone 2 9S-3582Ring 1 1M-7914Cover 1 5M-2043Collar Assembly 1 9S-3567Plug 1 2P-0347Bolt 3 0S-1594Plate 1 8P-6188Bolt 2 5K-9107Seal – Duo-Cone Group 1 6Y-0925Toric Ring (23) 2 8H-2262Seal – Cover 1 2H-6338Seal – Plug 1 1S-8947Seal – Shaft O-Ring 1 1H-9696Special Application SealsSeal – Duo-Cone Group (Steel Mill) 1 4S-8984Toric Ring (23) 2 9M-9730

235 CLASSIC CARRIER ROLLERS32K1-1300, 64R1-595


235 TRACK ROLLERSEXCAVATOR STYLE ROLLER 7/8" MOUNTING HARDWARE

1FD, 2PG, 3WG, 4DG, 4ED, 5AF, 64R2014-UP, 7WC302-UP, 83X665-UP, 8KJ, 8TJ, 9PC


Single Flange (SF) 18 8E-4579 (24) – (25)

Components of GroupRoller Shell (SF) 1 8E-4580 9W-5582 (26)

22 Optional Service Replaced by Classic Carrier Roller Group part number 188-5590.23 Component of preceding group; quantity shown is the quantity per group.24 Optional Service Replaced by Classic Track Roller Group part number 175-8216.25 Use 8E-4579 Roller Group & 4 - 1D-4631 Bolts or 1 - Roller Group (SF) 323-5925, 2 - End Cap 273-3996, 4 - Bolt 1D-4630, 4 - Washer 9H-

1031.26 Serviced Replaced By: 1 - Roller Group (SF) 323-5925, 2 - End Cap 273-3996, 4 - Bolt 1D-4630, 4 - Washer 9H-1031.

696

235235 TRACK ROLLERSEXCAVATOR STYLE ROLLER 7/8" MOUNTING HARDWARE1FD, 2PG, 3WG, 4DG, 4ED, 5AF, 64R2014-UP, 7WC302-UP, 83X665-UP, 8KJ, 8TJ, 9PC(Cont'd.)


Bearing (27) 1 9W-3359 9W-9498Shaft 1 9W-2210 3T-7392End Collar 2 8E-5456 (28) –

Retainer Assembly 2 – 9W-6632Thrust Washer (29) 1 – 8E-7510Dowel (29) 4 – 2H-1190Bolt 12 – 0S-1595Washer 12 – 5P-8245Ring 2 - 6T-4871Pin 2 9W-2212 –

Seal – Duo-Cone Group (Symmetric) 2 9W-2201 –

Toric Ring (27) 2 6H-1309 –

Seal – Duo-Cone Group (Inverted) 2 – 7T-0158Toric Ring (27) 1 – 6P-8912O-Ring (27) 1 – 6V-2701Seal – Shaft O-Ring 2 8F-6711 -

Seal – Retainer 2 – 5F-3106Stopper 1 – 7G-4332Plug 1 9W-2146 6Y-0473Special Application SealsSeal – Duo-Cone Group (Symmetric) (Steel Mill) 2 4S-8984 –

Toric Ring (27) 2 9M-9730 –

Seal – Duo-Cone Group (Inverted) (Steel Mill) 2 – 7T-5133Toric Ring (27) 1 – 7T-1094O-Ring (27) 1 – 6V-2701

235 CLASSIC TRACK ROLLERSEXCAVATOR STYLE ROLLER 7/8" MOUNTING HARDWARE

1FD, 2PG, 3WG, 4DG, 4ED, 5AF, 64R2014-UP, 7WC302-UP, 83X665-UP, 8KJ, 8TJ, 9PC


Bolt 4 1D-4631Washer 4 5P-8249

27 Component of preceding assembly or group; quantity shown is per assembly or group.28 Excavator Style Collar29 These components are only to repair retainer assembly. See Special Instruction SEHS8515.30 These components are not included in the roller group; quantities shown are required to mount each roller.

697

235235 TRACK ROLLERS

HARD BORE ROLLER 7/8" MOUNTING HARDWARE32K1301-UP, 64R596-2013, 7WC1-301, 81X, 83X1-664


Components of GroupRoller Shell (SF) 1 4S-9049Bushing Assembly 2 1P-8787Bearing (32) 1 8P-6651Shaft 1 9S-4324 (33)


Bolt 12 2P-3201Ring 2 6H-2953Seal – Duo-Cone Group 2 6Y-0925Toric Ring (32) 2 8H-2262Seal – Bushing O-Ring 2 4H-9105Seal – Shaft O-Ring 2 8F-8882Stopper 1 7G-4332Plug 1 6Y-0473Special Application SealsSeal – Duo-Cone Group (Steel Mill) 2 4S-8984Toric Ring (32) 2 9M-9730

235 CLASSIC TRACK ROLLERSHARD BORE ROLLER 7/8" MOUNTING HARDWARE32K1301-UP, 64R596-2013, 7WC1-301, 81X, 83X1-664


235 STANDARDIZED TRACK ROLLERS5/8" Mounting Hardware32K1-1300, 64R1-595


Single Flange (SF) (Arctic) 16 (35) 288-0945

Single Flange (SF) (High Heat) 16 (35) 288-0947Mounting Hardware (36)

Cap 2 317-9078

31 Optional Service Replaced by Classic Track Roller Group part number 188-5596.32 Component of preceding assembly or group; quantity shown is per assembly or group.33 Replaces former 9S-0313 shaft; requires 2 - 9S-0312 end collars.34 If 9S-0313 shaft is used, use 1 - 9S-0311 and 1 - 9S-0312 end collar.35 20 Required for long undercarriage.36 These components are not included in the roller group; quantities shown are required to mount each roller.

698

235235 STANDARDIZED TRACK ROLLERS5/8" Mounting Hardware32K1-1300, 64R1-595(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERBolt (5/8") 4 1D-4585Washer 2 2S-0736

235 TRACK ROLLERS5/8" MOUNTING HARDWARE

32K1-1300, 64R1-595


Single Flange (SF) 16 (37) 118-1614 (38) 122-0216 (39)

Components of GroupRoller Shell (SF) 1 6Y-2902 (40) 9G-8027 (40)

Bushing Assembly 2 2P-8048 2P-8048Bearing (41) 1 8P-5197 8P-5197Shaft 1 116-6702 (42) 116-6702 (42)

End Collar 2 5M-4436 (43) 5M-4436 (43)

Ring 2 5M-4443 5M-4443Bolt 12 2P-3201 1A-2029Washer 12 – 5M-2894Seal – Duo-Cone Group 2 6Y-0925 1M-8747Toric Ring (41) 2 8H-2262 8H-2262Seal – Bushing O-Ring 2 2H-3928 2H-3928Seal – Shaft O-Ring 2 5F-8000 5F-8000Stopper 1 7G-4332 7G-4332Plug 1 6Y-0473 6Y-0473Special Application SealsSeal – Duo-Cone Group (Steel Mill) 2 4S-8984 4S-8984Toric Ring (41) 2 9M-9730 9M-9730

37 20 required for long undercarriage.38 Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-9078, 4 - Bolt 1D-4585, 4 - Washer 2S-0736. Optional Service Re-

placed by Classic Track Roller Group part number 175-8035.39 Increased Bore Hardness. Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-9078, 4 - Bolt 1D-4585, 4 - Washer 2S-

0736. Optional Service Replaced by Classic Track Roller Group part number 175-8035.40 Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-9078, 4 - Bolt 1D-4585, 4 - Washer 2S-0736.41 Component of preceding assembly or group; quantity shown is per assembly or group.42 Replaces former 7G-0419 shaft, requires 2, 7G-0418 end collars. Serviced Replaced By: 1 - Roller Group (SF) 288-0934, 2 - End Cap 317-

9078, 4 - Bolt 1D-4585, 4 - Washer 2S-0736.43 If 5M-4448 shaft is used, use 1 - 5M-4436 and 1 - 5M-4435 end collar.

699

235235 CLASSIC TRACK ROLLERS

5/8" MOUNTING HARDWARE32K1-1300, 64R1-595


235 TRACK GUIDING GUARDS (SEGMENTED)1FD, 2PG, 32K1301-UP, 3WG, 4DG, 4ED, 5AF, 64R596-UP, 7WC, 81X, 83X, 8KJ, 8TJ, 9PC

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 6W-3504Bolt 8 1D-4635Washer 8 7X-0529Strip 4 3V-5055Bolt 16 0S-1592Washer 16 7X-0513

235 TRACK GUIDING GUARDS (SEGMENTED)32K1-1300, 64R1-595

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 4E-2887Bolt 4 1A-8063Bolt 12 7X-0403Washer 12 7X-0529Spacer 4 4F-6568

235 TRACK ROLLER GUARDSFULL LENGTH, SHORT UNDERCARRIAGE

1FD, 2PG, 32K1301-UP, 3WG, 4DG, 4ED, 5AF, 64R596-UP, 7WC, 81X, 83X, 8KJ, 8TJ, 9PC

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 6W-3502Guard Assembly 2 6W-3503Tube 16 3V-4812Bolt 16 6M-2001Nut 16 2J-3507Bolt 32 9S-1363Washer 16 8T-5361Spacer 32 3V-5305

44 20 required for long undercarriage.

700

235235 TRACK ROLLER GUARDSFULL LENGTH, SHORT UNDERCARRIAGE

32K1-1300, 64R1-595

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 6W-1029Guard Assembly 2 6W-1030Guard Assembly 2 6W-1031Guard Assembly 2 6W-1032Tube 14 8V-9129Bolt 14 6M-2001Nut 14 2J-3507Bolt 40 8S-9093Washer 68 7X-0529

235 TRACK ROLLER GUARDSFULL LENGTH, LONG UNDERCARRIAGE

32K1-1300, 64R1-595

(PER MACHINE) QUANTITY PART NUMBERTube 18 8V-9129Bolt 18 6M-2001Nut 18 2J-3507Bolt 48 8S-9093Washer 84 3K-5234

235 TRACK ROLLER GUARDSFULL LENGTH, LONG UNDERCARRIAGE

8KJ(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 9U-0371Guard Assembly 2 9U-0375Tube 18 3V-4812Bolt 18 6M-2001Nut 18 2J-3507Bolt 36 9S-1363Washer 18 8T-5361Spacer 36 3V-5305

235 CLASSIC GREASE TRACK32K1-1300, 64R1-595

8.00" (203.2 mm) PITCH – 3/4" BOLT



45 If installing new sprocket rim use 289-2207 Classic sprocket.

701

235235 CLASSIC GREASE TRACK32K1-1300, 64R1-5958.00" (203.2 mm) PITCH – 3/4" BOLT(Cont'd.)

PART NUMBER 47 SECTION 54 SECTIONTrack LinksRH Regular 289-0631 47 54LH Regular 289-0632 47 54Other ComponentsPin 175-8929 46 53Master Pin 289-0639 1 1Bushing (66.6 mm OD) 289-0641 46 53Master Bushing 289-0643 1 1Seal Grease 289-0645 92 106Spacer 289-0647 2 2Track Hardware (46)

Bolt 188-5633 188 216Nut 188-5856 188 216

46 Not part of link assembly: required to assemble track group.

702

245245 TRACK

1SJ, 4LK, 6MF, 7ZJ, 82X573-UP, 84X598-UP, 94L466-UP, 95V990-UP10.25" (260.4 mm) PITCH – 1" BOLT

QUANTITY SEALED PART NUMBERLink Assembly – 45 Section 2 8E-7857 (1)

Components of Link AssemblyTrack LinksRH Regular 45 8E-4055LH Regular 45 8E-4056Other ComponentsPin 44 290-0841Master Pin 1 290-0843Bushing 44 290-0825Master Bushing 1 290-0845Seal (Spring Washer) 180 1S-4446Spacer 2 1S-4445Track Hardware (2)

Bolt 180 3T-6308Nut 180 1S-6421

245 TRACK82X1-572, 84X1-597, 94L1-465, 95V1-9899.00" (228.6 mm) PITCH – 1" BOLT

QUANTITY SEALED PART NUMBERLink Assembly – 51 Section 2 8K-4753 (3)

Components of Link AssemblyTrack LinksRH Regular 51 290-0820LH Regular 51 290-0821Other ComponentsPin 50 1M-1455Master Pin 1 290-0823Bushing 50 290-0844Master Bushing 1 290-0826Seal (Spring Washer) 204 8M-2620Spacer 2 8M-2621Track Hardware (2)

Bolt 204 2M-5657Nut 204 2V-0250Special GroupPin and Bushing Group(41 Section, Common with D8 Pin & Bushing GP) 1 2P-6026

1 Serviced Replaced by Classic Sealed Link Assembly part number 290-0819.2 Not part of link assembly; required to assemble track group.3 Serviced Replaced by Classic Sealed Link Assembly part number 290-0837.

703

245245 CLASSIC SEALED TRACK

1SJ, 4LK, 6MF, 7ZJ, 82X573-UP, 84X598-UP, 94L466-UP, 95V990-UP10.25" (260.4 mm) PITCH – 1" BOLT

QUANTITY PART NUMBERLink Assembly – 45 Section 2 290-0819Components of Link AssemblyTrack LinksRH Regular 45 290-0838LH Regular 45 290-0839Other ComponentsPin 44 290-0841Master Pin 1 290-0843Bushing 44 290-0825Master Bushing 1 290-0845Seal (Spring Washer) 180 290-0835Spacer 2 290-0847Track Hardware (4)

Bolt 180 3T-6308Nut 180 1S-6421

245 CLASSIC SEALED TRACK82X1-572, 84X1-597, 94L1-465, 95V1-9899.00" (228.6 mm) PITCH – 1" BOLT

QUANTITY PART NUMBERLink Assembly – 51 Section 2 290-0837Components of Link AssemblyTrack LinksRH Regular 51 290-0820LH Regular 51 290-0821Other ComponentsPin 50 290-0822Master Pin 1 290-0823Bushing 50 290-0844Master Bushing 1 290-0826Seal (Spring Washer) 204 290-0846Spacer 2 290-0836Track Hardware (4)

Bolt 204 2M-5657Nut 204 2V-0250

4 Not part of link assembly: required to assemble track group.

704

245245 TRACK SHOES

10.25" (260.4 mm) PITCH – 1" BOLT

TYPE WIDTH PART NUMBERExtreme Service 24.0" (610 mm) 3T-8491Double Grouser 24.0" (610 mm) 9G-7109Double Grouser 30.0" (760 mm) 9G-7111Double Grouser 36.0" (915 mm) 9G-7113

245 TRACK SHOES9.00" (228.6 mm) PITCH – 1" BOLT

TYPE WIDTH PART NUMBERDouble Grouser 24.0" (610 mm) 2V-1687Double Grouser 32.0" (810 mm) 8K-1390Double Grouser 36.0" (915 mm) 8K-1392

245 SPROCKETS1SJ, 4LK, 6MF, 7ZJ, 82X573-UP, 84X598-UP, 94L466-UP, 95V990-UP

10.25" (260.4 mm) PITCH – 1" BOLT

(PER SIDE) QUANTITY PART NUMBERSprocket Assembly (22 Teeth) 1 7V-0753Rim (22 Teeth) 1 7T-1310 (5)

245 SPROCKETS82X1-572, 84X1-597, 94L1-465, 95V1-9899.00" (228.6 mm) PITCH – 1" BOLT

(PER SIDE) QUANTITY PART NUMBERSprocket Assembly (25 Teeth) 1 8K-4054Rim (25 Teeth) 1 2M-8810

245 CLASSIC SPROCKETS1SJ, 4LK, 6MF, 7ZJ, 82X573-UP, 84X598-UP, 94L466-UP, 95V990-UP

10.25" (260.4 mm) PITCH – 1" BOLT


245 IDLERS1SJ, 4LK, 6MF, 7ZJ, 82X573-UP, 84X598-UP, 94L466-UP, 95V990-UP

10.25" (260.4 mm) PITCH


Idler Group 2 6W-5557 –

Components of Group

5 Service Replaced by Classic sprocket part number 290-0861.

705

245245 IDLERS1SJ, 4LK, 6MF, 7ZJ, 82X573-UP, 84X598-UP, 94L466-UP, 95V990-UP10.25" (260.4 mm) PITCH(Cont'd.)


Idler Assembly 1 7T-9264 (6) 106-0458 (7)

Bearing (8) 2 9S-4540 9S-4540Shaft 1 186-2836 (9) 186-2836 (9)

Bearing Block 2 4E-0275 4E-0275Retainer 2 8P-5394 8P-5394Thrust Washer 1 8E-7510 8E-7510Seal – Duo-Cone Group 2 6Y-0925 6Y-0925Toric Ring (10) 2 8H-2262 8H-2262Seal – Shaft O-Ring 2 8F-8882 8F-8882Retainer O-Ring 2 5F-3106 5F-3106Bolt 24 5P-5855 5P-5855Washer 24 5P-8245 5P-8245Stopper 1 9G-4872 9G-4872Plug 1 6Y-0473 6Y-0473Pin 2 1S-3513 1S-3513Bolt 2 8T-9389 –Washer 2 6F-7831 –Special Application SealsSeal – Duo-Cone Group (Steel Mill) 2 4S-8984 4S-8984Toric Ring (8) 2 9M-9730 9M-9730

245 IDLERS82X1-572, 84X1-597, 94L212-465, 95V411, 95V437-989

9.00" (228.6 mm) PITCH

(PER SIDE) QUANTITY PART NUMBERComponents of GroupIdler Assembly 1 3V-5376Bearing (8) 2 9S-4540Shaft 1 186-2836 (9)

Bearing Block 2 4E-0275Retainer 2 8P-5394Thrust Washer 1 8E-7510Seal – Duo-Cone Group 2 6Y-0925Toric Ring (8) 2 8H-2262

6 Fabricated Design7 Cast Design8 Component of preceding assembly or group; quantity shown is quantity per assembly or group.9 With former shaft 138-4332 use 9G-5664 stopper.10 Component of preceding assembly or group; quantity shown is quantity per assembly or group

706

245245 IDLERS82X1-572, 84X1-597, 94L212-465, 95V411, 95V437-9899.00" (228.6 mm) PITCH(Cont'd.)(PER SIDE) QUANTITY PART NUMBERSeal – Shaft O-Ring 2 8F-8882Retainer )-Ring 2 5F-3106Bolt 24 0S-1587Washer 24 8T-4223Stopper 1 9G-4872Plug 1 6Y-0473Pin 2 1S-3513Bolt 2 8T-9389Washer 2 6F-7831Special Application SealsSeal – Duo-Cone Group (Steel Mill) 2 4S-8984Toric Ring (11) 2 9M-9730

245 IDLERS94L1-211, 95V1-410, 95V412-436

9.00" (228.6 mm) PITCH

(PER SIDE) QUANTITY PART NUMBERComponents of GroupIdler Assembly 1 – (12)

Bushing Assembly 2 6P-2083Shaft 1 9S-4324Bearing Block 2Seal – Duo-Group 2 9W-2142Toric Ring (13) 2 8H-2265Seal – Bushing O-Ring 2 5F-3106Seal – Shaft O-Ring 2 1H-5728Seal – Plug 1 1S-8947Bolt 12 0S-1585Washer 12 3B-4508Plug 1 2P-0347Pin 2 1S-3513Bolt 2 9S-1366Washer 2 6F-7831Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 8S-5656Toric Ring (11) 2 8S-5653

11 Component of preceding assembly or group; quantity shown is quantity per assembly or group.12 Idler Assembly no longer serviced.13 Component of preceding assembly or group; quantity shown is quantity per assembly or group

707


1SJ, 4LK, 6MF, 7ZJ, 82X573-UP, 84X598-UP, 94L466-UP, 95V990-UP10.25" (260.4 mm) PITCH

(PER MACHINE) QUANTITY PART NUMBERGroup 6 9G-7034Components of GroupRoller Shell 1 9G-7033Shaft 1 8P-6255Cup 2 7K-5448Cone 2 7K-5449Ring 1 9H-7759Cover 1 5M-2043Collar Assembly 1 9H-9414Bolt 3 0S-1594Plate 1 3T-6269Bolt 2 6F-7030Seal – Duo-Cone Group 2 6Y-0925Toric Ring (14) 2 8H-2262Seal – Cover 1 2H-6338Seal – Shaft 1 1H-5728Seal – Plug 1 1S-8947Plug 1 2P-0347

245 CARRIER ROLLERS82X1-572, 84X1-597, 94L1-465, 95V1-989

9.00" (228.6 mm) PITCH


Components of GroupRoller Shell 1 – (15)

Shaft 1 8P-6255Cup 2 7K-5448Cone 2 7K-5449Ring 1 9H-7759Cover 1 5M-2043Collar Assembly 1 9H-9414Bolt 3 0S-1594Plate 1 3T-6269Bolt 2 6F-7030Seal – Duo-Cone Group 2 6Y-0925Toric Ring (14) 2 8H-2262Seal – Cover 1 2H-6338

14 Component of preceding assembly or group.15 Service replaced by Classic Carrier Roller 188-5612.

708

245245 CARRIER ROLLERS82X1-572, 84X1-597, 94L1-465, 95V1-9899.00" (228.6 mm) PITCH(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERSeal – Shaft 1 1H-5728Seal – Plug 1 1S-8947Plug 1 2P-0347

245 TRACK ROLLERS1SJ, 4LK, 6MF, 7ZJ, 82X727-UP, 84X990-UP

10.25" (260.4 mm) PITCH

(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) 18 8E-0830Components of GroupRoller Shell (SF) 1Bushing Assembly (16) 2 9W-6714Shaft 1 9W-6715End Collar 2 9W-4355Pin 2 9W-6718Seal – Duo-Cone Group 2 9W-6717Toric Ring (16) 2 4K-0173Seal – Shaft O-Ring 2 2H-4145Plug 1 9W-2146Mounting Hardware (17)

Bolt (1") 4 1D-4639Washer 4 5P-8250

245 TRACK ROLLERS82X1-726, 84X1-989, 94L, 95V10.25" (260.4 mm) PITCH

(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) 18 8E-0831Components of GroupRoller Shell (SF) 1Bushing Assembly (16) 2 9W-6714Shaft 1 9W-6715End Collar 2 9W-6716Pin 2 9W-6718Seal – Duo-Cone Group 2 9W-6717Toric Ring (16) 2 4K-0173Seal – Shaft O-Ring 2 2H-4145


709

245245 TRACK ROLLERS82X1-726, 84X1-989, 94L, 95V10.25" (260.4 mm) PITCH(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERPlug 1 9W-2146Mounting Hardware (18)

Bolt (7/8") 4 1D-4630Washer 4 5P-8249

245 TRACK ROLLERS82X1-726, 84X1-989, 94L, 95V9.00" (228.6 mm) PITCH


Components of GroupRoller Shell (SF) 1 9G-7046Bearing (20) 2 9S-4540Shaft 1 123-1191End Collar 2 9S-4536Retainer 2 8P-5394Thrust Washer 2 8E-7510Bolt 24 0S-1587Washer 24 3H-7654Ring 2 6H-6237Seal – Duo-Cone Group 2 6Y-0925Toric Ring (20) 2 8H-2262Seal – Retainer O-Ring 2 5F-3106Seal – Shaft O-Ring 2 8F-6711Stopper 1 7G-4332Plug 1 6Y-0473Mounting Hardware (18)

Bolt (7/8") 4 1D-4630Washer 4 9H-1031

245 TRACK GUIDING GUARDS (SEGMENTED)1SJ, 4LK, 6MF, 7ZJ, 82X573-UP, 84X598-UP, 94L466-UP, 95V990-UP

(PER MACHINE) QUANTITY PART NUMBERFrontGuard Assembly 2 –

Wear Strip 2 7V-0896

18 These components are not included in the roller group; quantities shown are required to mount each roller.19 If mounting bolt loosening problems occur with this roller group, the preferred service replacement is 8E-0831.20 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

710

245245 TRACK GUIDING GUARDS (SEGMENTED)1SJ, 4LK, 6MF, 7ZJ, 82X573-UP, 84X598-UP, 94L466-UP, 95V990-UP(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERWear Strip 2 7V-0897Bolt 20 0S-1592Washer 20 5P-8247RearGuard Assembly 2 9C-3628Wear Strip 4 9C-3416Bolt 8 7X-0407Washer 8 3V-5305Bolt 20 0S-1589Washer 20 8T-4122

245 TRACK GUIDING GUARDS (SEGMENTED)82X1-572, 84X1-597, 94L1-465, 95V1-989

(PER MACHINE) QUANTITY PART NUMBERFrontGuard Assembly 2 1V-5433Wear Strip 4 1V-5431Bolt 20 0S-1592Washer 20 3B-4510RearGuard Assembly 2 1V-5433Wear Strip 4 1V-5431Bolt 8 1D-4637Washer 8 3P-6600Bolt 20 0S-1592Washer 20 3B-4510

245 TRACK ROLLER GUARDSFULL LENGTH

1SJ, 4LK, 6MF, 7ZJ, 82X573-UP, 84X598-UP, 94L466-UP, 95V990-UP

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 4 7V-0820Guard Assembly 4 7V-0821

711

E70B, E70E70B, E70 TRACK*

3BG1-UP, 3CG1-UP, 5TG1-UP, 6AK1-UP, 7YF1-UP5.31" (135.0 mm) PITCH – 1/2" BOLT

QUANTITY SEALED PART NUMBERLink Assembly – 42 Section 2 102-8077Components of Link AssemblyTrack LinksRH Master 1 096-2142LH Master 1 096-2143RH Regular 41 093-1969LH Regular 41 093-1970Other ComponentsPin 41 093-0515Master Pin 1 093-0517Bushing 41 102-8107Master Bushing 1 102-8108Spacer 2 093-0036Cotter Pin 1 096-7033Track Hardware (1)

Bolt 168 102-8072Nut 168 102-8073* Adaptable to MS70-8 machines.

E70B, E70 TRACK SHOES*5.31" (135.0 mm) PITCH – 1/2" BOLT

TYPE WIDTH PART NUMBERTriple Grouser 17.7" (450 mm) 1R-9507Triple Grouser 23.6" (600 mm) 093-1935

* Adaptable to MS70-8 machines.

E70B SPROCKET5TG00660- UP, 6AK, 7YF

(PER SIDE) QUANTITY PART NUMBERSprocket Rim 1 096-2144Bolt 12 8C-3425

E70B SPROCKET5TG 1 - 00659

(PER SIDE) QUANTITY PART NUMBERSprocket Rim 1 1R-5440Bolt 12 8C-3425


712

E70B, E70E70 SPROCKETS*

3BG, 3CG

(PER SIDE) QUANTITY PART NUMBERSprocket Rim 1 096-2144Bolt 12 167-4339Washer 12 095-0818* Adaptable to MS70-8 machines.

E70B, E70 IDLERS*(PER SIDE) QUANTITY PART NUMBERComponents of GroupIdler Assembly (Includes components below) 1 1R-8938Other ComponentsBushing Assembly 2 093-1839Shaft 1 093-1701Bearing Block 2 1R-8939Seal – Duo-Cone Group 2 093-1415Seal – Shaft O-Ring 2 095-1600


E70B CARRIER ROLLERS*5TG, 6AK, 7YF


Components of GroupRoller Shell - – (3)

Bushing 2 099-6461Seal – Duo-Cone Group 1 099-6463Seal – Cover 1 095-1541Seal – Shaft O-Ring 1 095-1658


E70 CARRIER ROLLERS*3BG, 3CG

(PER MACHINE) QUANTITY PART NUMBERGroup 2 093-4333Components of GroupRoller Shell – – (3)

2 Use 277-8576 Carrier Roller.3 Roller Shell not serviced.

713

E70B, E70E70 CARRIER ROLLERS*3BG, 3CG(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERBushing 2 –

Shaft 1 –Ring 1 6V-5200Seal – Duo-Cone Group 1 –

Seal – Cover 1 095-1663Seal – Shaft O-Ring 1 095-1658


E70B TRACK ROLLERS5TG1-UP, 6AK1-UP, 7YF1-UP

(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) 10 –

Components of GroupRoller Shell (SF) – – (4)

Bearing 2 5I-6274Shaft 1 –

Seal – Shaft O-Ring 2 095-1659Plug 1 095-0966Mounting Hardware (5)

Bolt 4 8T-4648Washer 4 085-5519

E70 TRACK ROLLERS3BG1-UP, 3CG1-UP

(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) 10 093-2027Components of GroupRoller Shell (SF) – – (4)

Bushing 2 –

Shaft 1 –

End Collar 2 –

Seal – Duo-Cone Group 2 093-1414Seal – Shaft O-Ring 2 095-1533Plug 1 095-0966Mounting Hardware (5)

4 Roller shell not serviced.5 These components are not included in the roller

714

E70B, E70E70 TRACK ROLLERS3BG1-UP, 3CG1-UP(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERBolt 4 099-4329Washer 4 7X-0622

715

E120B, E120, E110B, E110E120B, E120 TRACK*

1LF1-UP, 1MF1-UP, 4XK1-UP, 6JF1-UP, 7NF1-UP6.75" (171.5 mm) PITCH – 16 mm BOLT

QUANTITY GREASED PART NUMBERLink Assembly – 43 Section 2 176-4870Components of Link AssemblyTrack LinksRH Master 1 4I-7477LH Master 1 4I-7478RH Regular 42 4I-7475LH Regular 42 4I-7476Other ComponentsPin 42 162-4305Master Pin 1 099-0653Cotter Pin 1 095-0863Bushing 42 162-4304Master Bushing 1 162-4306Seal (Poly -W) 84 162-4307Seal- Master (Poly -W) 2 176-4872Track Hardware (1)

Bolt 172 4I-7538Bolt (2) 86 093-0261Bolt (2) 86 093-0259Nut 172 5I-6125* Adaptable to MS120-8 machines.

E110, E110B TRACK*E110 (Quantity 2): 1MJ1-UP, 3FG1-UP, 3GG1-UP E110B (41 SECTION): 5GK1-UP, 8MF1-UP, 9HF1-UP

6.75" (171.5 mm) PITCH – 16 mm BOLT

GREASE PART NUMBER 39 SECTION 41 SECTIONLink Assembly – Section 39 – (3) 162-4303 (3)

Components of Link AssemblyTrack LinksRH Master 4I-7477 1 1LH Master 4I-7478 1 1RH Regular 4I-7475 38 40LH Regular 4I-7476 38 40Other ComponentsPin 162-4305 38 40Master Pin 099-0653 1 1Cotter Pin 095-0863 1 1

1 Not part of link assembly; required to assemble track group.2 Required for Self-Cleaning shoes.3 Order 162-4303 link assembly and remove 2 sections.

716

E120B, E120, E110B, E110E110, E110B TRACK*E110 (Quantity 2): 1MJ1-UP, 3FG1-UP, 3GG1-UP E110B (41 SECTION): 5GK1-UP, 8MF1-UP, 9HF1-UP6.75" (171.5 mm) PITCH – 16 mm BOLT(Cont'd.)

GREASE PART NUMBER 39 SECTION 41 SECTIONBushing 162-4304 38 40Master Bushing 162-4306 1 1Seal (Poly -W) 162-4307 76 80Seal- Master (Poly -W) 176-4872 2 2Track Hardware (4)

Bolt 4I-7538 156 164Bolt (5) 093-0261 78 82Bolt (5) 093-0259 78 82Nut 5I-6125 156 164* Adaptable to MS110-8 machines.

E120B, E120, E110B, E110 TRACK SHOES*6.75" (171.5 mm) PITCH – 16 mm BOLT

TYPE WIDTH PART NUMBERTriple Grouser 19.7" (500 mm) 1R-6008Triple Grouser 23.6" (600 mm) 1R-6009Triple Grouser 27.6" (700 mm) 1R-6010Triple Grouser 29.5" (750 mm) 1R-6011Self-Cleaning 30.3" (770 mm) 096-0231Flat 19.7" (500 mm) 096-0240

* Adaptable to MS120-8 and MS110-8 machines.

E120B SPROCKETS*6JF, 7NF, 4XK

(PER SIDE) QUANTITY PART NUMBERSprocket Assembly (21 Teeth) 1 099-0219Bolt 15 6V-8201* Adaptable to MS120-8 machines.

E110B SPROCKETS*8MF, 9HF, 5GK

(PER SIDE) QUANTITY PART NUMBERSprocket Assembly (21 Teeth) 1 – (6)

Bolt 15 8T-7338

4 Not part of link assembly; required to assemble track group.5 Required for Self-Cleaning shoes.6 099-5350 Sprocket Assembly serviced by 4I7472 Sprocket Rim.

717

E120B, E120, E110B, E110* Adaptable to MS110-8 machines.

E120, E110 SPROCKETS*1MF, 1MJ, 3FG102-UP, 3GG4909-UP

(PER SIDE) QUANTITY PART NUMBERSprocket Assembly (23 Teeth) 1 099-3220Bolt 16 6V-5686Washer 16 9X-8257* Adaptable to MS120-8 and MS110-8 machines.

E120, E110 SPROCKETS*1LF, 3FG1-101, 3GG1-4908

(PER SIDE) QUANTITY PART NUMBERSprocket Assembly (23 Teeth) 1 096-1479Bolt 15 6V-5686Washer 15 9X-8257* Adaptable to MS120-8 and MS110-8 machines.

E120B, E110B IDLERS*6JF, 7NF, 4XK, 8MF, 9HF, 5GK

(PER SIDE) QUANTITY PART NUMBERComponents of GroupIdler Assembly 1 –

Bushing Assembly 2 099-0157Bearing Block 2 099-0156Seal – Duo-Cone Group 2 099-0159Seal – Shaft O-Ring 2 095-1662


E120, E110 IDLERS*1LF, 1MF, 3FG, 3GG, 1MJ

(PER SIDE) QUANTITY PART NUMBERComponents of GroupIdler Assembly 1 –

Bushing Assembly 2 093-1844Shaft 1 093-1697Seal – Duo-Cone Group 2 095-7100Seal – Shaft O-Ring 2 095-1545


718

E120B, E120, E110B, E110E120B, E110B CARRIER ROLLERS*

6JF, 7NF, 4XK, 8MF, 9HF, 5GK

(PER MACHINE) QUANTITY PART NUMBERComponents of GroupGroup 2 –

Roller Shell - – (7)

Bushing 2 099-0185Shaft 1 099-0182 (8)

Seal – Duo-Cone Group 1 099-0183Seal – Cover 1 6V-7609Seal – Shaft O-Ring 1 099-0187


E120, E110 CARRIER ROLLERS*1LF, 1MF, 3FG, 3GG, 1MJ



Seal – Cover 1 6V-7609Seal – Shaft O-Ring 1 6V-7660


E120B, E110B TRACK ROLLERS*6JF, 7NF, 4XK, 5GK, 8MF, 9HF

(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) 12 –


Bushing 2 099-0195Seal – Duo-Cone Group 2 340-8206Seal – Shaft O-Ring 2 095-1681Plug 1 095-0966Mounting Hardware (9)

Bolt 4 7X-2555Washer 4 9X-8257* Adaptable to MS 120-8 and MS110-8 machines.

7 Roller shell not serviced.8 Serviced Replaced By: 099-5516.9 These components are not included in the roller group; quantities shown are required to mount each roller.

719

E120B, E120, E110B, E110E120, E110 TRACK ROLLERS*

1LF, 1MF, 3FG, 3GG, 1MJ

(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) 10 093-8747Components of GroupRoller Shell (SF) – – (10)

Bushing 2 093-1844Shaft 1 –End Collar 2 –Seal – Duo-Cone Group 2 096-0655Seal – Shaft O-Ring 2 095-1545Plug 1 095-0966Mounting Hardware (11)

Bolt 4 099-4347Washer 4 9X-8257* Adaptable to MS120-8 and MS110-8 machines.

E120B, E110B TRACK GUIDING GUARDS*6JF, 7NF, 4XK, 8MF, 9HF, 5GK

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 133-2554Bolt 8 8T-4779Washer 8 9X-8257* Adaptable to MS120-8 and MS110-8 machines.

10 Roller shell not serviced.11 These components are not included in the roller group; quantities shown are required to mount each roller.

720

E140E140 TRACK*1NF1-UP, 1PF1-UP

6.75" (171.5 mm) PITCH – 16 mm BOLT

QUANTITYGREASED PARTNUMBER

Link Assembly – 44 Section 2 229-0998Components of Link AssemblyTrack LinksRH Master 1 4I-7477LH Master 1 4I-7478RH Regular 43 4I-7475LH Regular 43 4I-7476Other ComponentsPin 43 162-4305Master Pin 1 099-0653Bushing 43 162-4304Master Bushing 1 162-4306Seal (Poly -W) 86 162-4307Seal- Master (Poly -W) 2 176-4872Cotter Pin 1 095-0863Track HardwareBolt 176 096-1043Bolt (1) 88 093-0261Bolt (1) 88 093-0259Nut 176 093-0319* Adaptable to MS140-8 machines.

E140 TRACK SHOES*6.75" (171.5 mm) PITCH – 16 mm BOLT

TYPE WIDTH PART NUMBERSelf-Cleaning 30.3" (770 mm) 096-0231


E140 SPROCKETS*(PER SIDE) QUANTITY PART NUMBERSprocket Assembly 1 096-8047Bolt 22 8T-0375* Adaptable to MS140-8 machines.

1 Required for Self-Cleaning shoes.

721

E140E140 IDLERS*

(PER SIDE) QUANTITY PART NUMBERComponents of GroupIdler Assembly 1 093-6937Bushing Assembly 2 093-1837Seal – Duo-Cone Group 2 096-0883Seal – Shaft O-Ring 2 8T-6346

*Adaptable to MS140-8 machines.

E140 CARRIER ROLLERS*(PER MACHINE) QUANTITY PART NUMBERGroup 2 093-6946


Ring 1 8T-4241Seal – Cover 1 6V-7609Seal – Shaft O-Ring 1 6V-7660


E140 TRACK ROLLERS*(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) 14 093-8747

Components of GroupRoller Shell (SF) 1 – (2)

Bushing 2 093-1844Seal – Duo-Cone Group 2 096-0655Seal – Shaft O-Ring 2 095-1545Plug 1 095-0966Mounting Hardware (3)

Bolt 4 096-7698Washer 4 9X-8257* Adaptable to MS140-8 machines.

2 Roller shell not serviced.3 These components are not included in the roller group; quantities shown are required to mount each roller.

722

E180, EL180E180, EL180 TRACK*

E180 (48 SECTION): 1RF1-UP, 2BF1-UP, 5HG1-UP EL180 (52 SECTION): 4EF1-UP, 4HF1-UP6.91" (175.5 mm) PITCH – 18 mm BOLT

UNSEALED PARTNUMBER 48 SECTION 52 SECTION

Link Assembly – (Quantity 2) 093-1927 – (1)

Components of Link AssemblyTrack LinksRH Master 093-2000 1 1LH Master 093-1999 1 1RH Regular 095-7130 47 51LH Regular 093-1979 47 51Other ComponentsPin 093-0509 47 51Master Pin 093-0521 1 1Bushing 093-1890 47 51Master Bushing 093-1891 1 1Spacer 093-0042 2 2Track Hardware (2)

Bolt 093-0262 192 208Bolt (3) 093-0264 192 208Nut 093-0320 192 208* Adaptable to MS180-8 and MS180LC-8 machines.

E180, EL180 TRACK SHOES*6.91" (175.5 mm) PITCH – 18 mm BOLT

(PER MACHINE) WIDTH PART NUMBERTriple Grouser 23.6" (600 mm) 093-1946Triple Grouser 31.5" (800 mm) 093-1947

* Adaptable to MS180-8 and MS180LC-8 machines.

E180, EL180 SPROCKETS*(PER SIDE) QUANTITY PART NUMBERSprocket Assembly 1 095-7412Bolt 22 6V-5686Washer 22 9X-8257* Adaptable to MS180-8 and MS180LC-8 machines.

1 Order 48 section 093-1927 and add 4 sections.2 Not part of link assembly; required to assemble track group.3 Required for Self-Cleaning shoes.

723

E180, EL180E180, EL180 IDLERS*

(PER SIDE) QUANTITY PART NUMBERComponents of GroupIdler Assembly 1 104-8170Bushing Assembly 2 093-1845Shaft 1 093-1693Bearing Block 2 094-0548Seal – Duo-Cone Group 2 096-0883Seal – Shaft O-Ring 2 095-1549


E180, EL180 CARRIER ROLLERS*(PER MACHINE) QUANTITY PART NUMBERGroup 4 096-5260


Bushing 2 094-0563Ring 1 095-0928Seal – Duo-Cone Group 1 093-1413Seal – Cover 1 8T-5376Seal – Shaft O-Ring 1 095-1663


E180, EL180 TRACK ROLLERS*(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) 14 (5) 095-7138Components of GroupRoller Shell (SF) – – (4)

Bushing 2 093-1849End Collar 2 094-1388Seal – Duo-Cone Group 2 095-7099Seal – Shaft O-Ring 2 6V-7658Plug 1 095-0967Mounting Hardware (6)

Bolt 4 093-0259Washer 4 9X-8257* Adaptable to MS180-8 and MS180LC-8 machines.

4 Roller shell not serviced.5 16 rollers required for long undercarriage.6 These components are not included in the roller group; quantities shown are required to mount each roller.

724

E180, EL180E180, EL180 TRACK GUIDING GUARDS (SEGMENTED)*

(PER MACHINE) QUANTITY PART NUMBERSprocket Assembly 2 096-2052Bolt 8 099-2668Washer 8 095-0819* Adaptable to MS180-8 and MS180LC-8 machines.

725

E200B, EL200BE200B, EL200B TRACK

E200B (45 SECTION): 4SG1-UP, 6KF1-UP, 6KG1-UP EL200B (49 SECTION): 5EG1-UP, 7DF1-UP7.50" (190.5 mm) PITCH – 20 mm BOLT

SEALED PARTNUMBER 45 SECTION 49 SECTION

Link Assembly (Quantity 2) – (1) – (2)

Components of Link AssemblyTrack LinksRH Master 8E-8585 1 1LH Master 8E-8586 1 1RH Regular 9W-3137 44 48LH Regular 9W-3138 44 48Other ComponentsPin 6Y-8186 44 48Master Pin 188-3064 1 1Cotter Pin 095-0863 1 1Bushing 117-1371 44 48Master Bushing 117-1372 1 1Seal (Spring Washer) 5S-0709 180 196Spacer 5S-0754 2 2Track Hardware (3)

Bolt 9W-3619 180 196Nut 9W-3361 180 196

E200B, EL200B TRACK SHOES7.50" (190.5 mm) PITCH – 20 mm BOLT

TYPE WIDTH PART NUMBERTriple Grouser (Center Punched Slots) 23.6" (600 mm) 6I-9453Triple Grouser (Center Punched Slots) 27.6" (700 mm) 6I-9454Triple Grouser (Center Punched Slots) 31.5" (800 mm) 9W-9351Self-Cleaning 31.5" (800 mm) 8E-8835

E200B, EL200B SPROCKETS(PER SIDE) QUANTITY PART NUMBERSprocket Assembly 1 096-4327Bolt 14 8T-6430

1 Upgrade to link assembly 194-1609 or Classic 308-6229.2 Upgrade to link assembly 194-1608 or Classic 308-6230.3 Not part of link assembly; required to assemble track group.

726

E200B, EL200BE200B, EL200B IDLERS


Components of GroupIdler Assembly 1 115-4926Bushing Assembly 2 8E-4359Shaft 1 099-1461Bearing Block 2 099-1460Seal – Duo-Cone Group 2 9W-2201Toric Ring (4) 1 6H-1309Seal – Shaft O-Ring 2 6V-7658

E200B, EL200B CARRIER ROLLERS(PER MACHINE) QUANTITY PART NUMBERGroup 4 8E-5600 (5)


Shaft 1 8E-5601Seal – Cover 1 6V-7661Seal – Shaft O-Ring 1 096-4280

E200B, EL200B TRACK ROLLERS(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) 14 (7) – (8)


Bushing 2 8E-5599Shaft 1 – (9)

End Collar 2 8E-5037Seal – Duo-Cone Group 2 9W-2142Toric Ring (10) 1 8H-2265Seal – Shaft O-Ring 2 095-1663Plug 1 095-0967Mounting Hardware (11)

Bolt 4 7X-2564

4 Component of preceding assembly or group; quantity shown is quantity per assembly or group.5 320B Carrier Roller. Classic optional service replacement 392-95376 Roller shell not serviced.7 16 rollers required for long undercarriage.8 Service replaced by 320B Roller 163-4143. Classic optional service replacement 286-9823.9 099-1463 Shaft serviced by (1) 8E-5035 Shaft (1) 5G-2247 Stopper (1) 6Y-0473 Plug.10 Component of preceding group.11 These components are not included in the roller group; quantities shown are required to mount each roller.

727

E240C, EL240C, E240B, EL240B, E240, EL240EL240C, EL240B GREASE TRACK WITH BIG BUSHING

5WG1-UP, 6MG1-UP, 9PK1-UP7.50" (190.5 mm) PITCH – 20 mm

QUANTITY PART NUMBERLink Assembly –50 Section 1 240-3056Components of Link AssemblyTrack LinksRH Master 1 8E-8585LH Master 1 8E-8585RH Regular 49 9W-3137LH Regular 49 9W-3138Other ComponentsPin 49 6Y-8186Master Pin 1 188-3064Bushing 49 190-3523Master Bushing 1 190-3524Cotter 1 095-0863Seal (Poly - W) 98 158-4380Seal - Master (Poly W) 2 158-4381Track Hardware (1)

Bolt 200 9W-3619Nut 200 9W-3361

E240C/B, EL240C/B TRACK*E240C/B (46 SECTION): 2RL1-UP, 8SF1-UP, 9PF1-UP EL240C/B(50 SECTION): 5WG1-UP, 6MG1-UP, 9PK1-UP

7.50" (190.5 mm) PITCH – 20 mm BOLT


Link Assembly (Quantity 2) 087-8805 087-8806 (2)

Components of Link AssemblyTrack LinksRH Master 8E-8585 1 1LH Master 8E-8586 1 1RH Regular 9W-3137 45 49LH Regular 9W-3138 45 49Other ComponentsPin 6Y-8186 45 49Master Pin 188-3064 1 1Cotter Pin 095-0863 1 1Bushing 117-1371 45 49Master Bushing 117-1372 1 1Seal (Spring Washer) 5S-0709 184 200Spacer 5S-0754 2 2

1 Not part of link assembly; required to assemble track group.2 Canceled replaced by link assembly 240-3056.

728

E240C, EL240C, E240B, EL240B, E240, EL240E240C/B, EL240C/B TRACK*E240C/B (46 SECTION): 2RL1-UP, 8SF1-UP, 9PF1-UP EL240C/B(50 SECTION): 5WG1-UP, 6MG1-UP, 9PK1-UP7.50" (190.5 mm) PITCH – 20 mm BOLT(Cont'd.)


Track Hardware (3)

Bolt 9W-3619 184 200Nut 9W-3361 184 200* Also adaptable to MS240LC-8 machines and parts replacement for early E240.

E240 TRACK*1FG, 2HF

7.50" (190.5 mm) PITCH – 20 mm BOLT

QUANTITYFORMER UNSEALEDPART NUMBER

UNSEALED PARTNUMBER


Components of Link AssemblyTrack LinksRH Master 1 – –LH Master 1 – 096-5259RH Regular 45 093-1981 –

LH Regular 45 093-1980 –

Other ComponentsPin 45 093-0502 093-0502Master Pin 1 093-0522 093-0522Bushing 45 095-7119 –

Master Bushing 1 095-7120 096-5256Spacer 2 093-0043 093-0043Track Hardware (3)

Bolt 184 093-0266 093-0266Bolt (5) 184 096-0551 096-0551Nut 184 093-0321 093-0321* Also adaptable to MS240LC-8 machines.

3 Not part of link assembly; required to assemble track group.4 Link Assembly no longer serviced.5 For use with self-cleaning track shoes.

729

E240C, EL240C, E240B, EL240B, E240, EL240EL240 TRACK*

4JF, 4MF7.50" (190.5 mm) PITCH – 20 mm BOLT


UNSEALED PARTNUMBER

Link Assembly – 50 Section 2 – (6) 096-5251Components of Link AssemblyTrack LinksRH Master 1 – –LH Master 1 – 096-5259RH Regular 49 093-1981 –

LH Regular 49 093-1980 –


Master Bushing 1 095-7120 096-5256Spacer 2 093-0043 093-0043Track Hardware (7)

Bolt 200 093-0266 093-0266Bolt (8) 200 096-0551 096-0551Nut 200 093-0321 093-0321* Also adaptable to MS240LC-8 machines.

E240C/B, EL240C/B, TRACK SHOES*2RL, 5WG, 6MG, 8SF, 9PF, 9PK

7.50" (190.5 mm) PITCH – 20 mm BOLT

TYPE WIDTH PART NUMBERTriple Grouser (Center Punched Slots) 23.6" (600 mm) 6I-9453Triple Grouser (Center Punched Slots) 27.5" (700 mm) 6I-9454Triple Grouser (Center Punched Slots) 31.5" (800 mm) 9W-9351Self-Cleaning 31.5" (800 mm) 8E-8835

* Also adaptable to MS240LC-8 and MS240-8 machines.

E240, EL240 TRACK SHOES*1FG, 2HF, 4JF, 4MF

7.50" (190.5 mm) PITCH – 20 mm BOLT

TYPE WIDTH PART NUMBERTriple Grouser 31.5" (800 mm) 095-7123

* Also adaptable to MS240-8 and MS240LC-8 machines.

6 Upgrade to 096-5251 Link Assembly.7 Not part of link assembly; required to assemble track group.8 For use with self-cleaning track shoes.

730

E240C, EL240C, E240B, EL240B, E240, EL240E240C/B, EL240C/B, E240, EL240 SPROCKETS*

(PER SIDE) QUANTITY PART NUMBERSprocket Assembly 1 095-9779Bolt 14 6V-3532Washer 14 085-9311* Also adaptable to MS240-8 and MS240LC-8 machines.

E240C/B, EL240C/B, E240, EL240 IDLERS*(PER SIDE) QUANTITY PART NUMBERComponents of GroupIdler Assembly 1 094-1384Bushing Assembly 2 093-1848Shaft 1 093-1693Bearing Block 2 094-0548Seal – Duo-Cone Group 2 096-0883Seal – Shaft O-Ring 2 095-1549


E240C/B, EL240C/B, E240, EL240 CARRIER ROLLERS*(PER MACHINE) QUANTITY PART NUMBERGroup 4 096-5260

Components of GroupRoller Shell – – (9)

Bushing 2 094-0563Shaft 1 094-6386Ring 1 095-0928Seal – Duo-Cone Group 1 093-1413Seal – Cover 1 8T-5376Seal – Shaft O-Ring 1 095-1663


E240C/B, EL240C/B, E240, EL240 TRACK ROLLERS*(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) 14 (10) 095-7138

Double Flange (DF) – 093-9275Components of GroupRoller Shell (SF) – – (9)

Roller Shell (DF) – – (9)

9 Roller shell not serviced.10 16 rollers required for long undercarriage.

731

E240C, EL240C, E240B, EL240B, E240, EL240E240C/B, EL240C/B, E240, EL240 TRACK ROLLERS* (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERBushing 2 093-1849Shaft 1 094-1782End Collar 2 094-1388Seal – Duo-Cone Group 2 095-7099Seal – Shaft O-Ring 2 6V-7658Plug 1 095-0967Mounting Hardware (11)

Bolt 4 093-0259Washer 4 9X-8257* Also adaptable to MS240-8 and MS240LC-8 machines.

E240C/B, EL240C/B, E240, EL240 TRACK GUIDING GUARDS*1FG, 2HF

7.50" (190.5 mm) PITCH

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 096-2052Bolt 8 099-2668Washer 8 095-0819* Also adaptable to MS240-8 and MS240LC-8 machines.


732

E300B, EL300B, E300, EL300E300B, EL300B, EL300 TRACK*

E300B (46 SECTION): 1WJ1-UP EL300B, EL300 (50 SECTION): 1GK1-UP, 3FJ1-UP, 4NF (EARLY MODELS), 4SF (EARLY MODELS)8.00" (203.2 mm) PITCH – 20 mm BOLT


Link Assembly (Quantity 2) 099-5998 099-2658Components of Link AssemblyTrack LinksRH Master 099-6008 1 1LH Master 099-5999 1 1RH Regular 096-0264 45 49LH Regular 096-0263 45 49Other ComponentsPin 096-0244 45 49Master Pin 099-5554 1 1Cotter Pin 095-0867 1 1Bushing 099-5996 45 49Master Bushing 096-0094 1 1Seal (Spring Washer) 8M-7231 184 200Spacer 096-0241 2 2Track Hardware (1)

Bolt 093-0265 184 200Nut 093-0321 184 200* Also adaptable to MS300LC-8 Machines (50 Section link assembly).

E300 TRACK*1KG, 2CF

7.50" (190.5 mm) PITCH – 20 mm BOLT


UNSEALED PARTNUMBER


Components of Link AssemblyTrack LinksRH Master 1 – –LH Master 1 – 096-5259RH Regular 48 093-1981 –

LH Regular 48 093-1980 –


Master Bushing 1 095-7120 096-5256Spacer 2 – 093-0043

1 Not part of link assembly; required to assemble track group.2 Link Assembly no longer serviced.

733

E300B, EL300B, E300, EL300E300 TRACK*1KG, 2CF7.50" (190.5 mm) PITCH – 20 mm BOLT(Cont'd.)


UNSEALED PARTNUMBER

Track Hardware (3)

Bolt 196 093-0266 093-0266Nut 196 093-0321 093-0321* Also adaptable to MS300LC-8 machines.

E300B, EL300B, EL300 TRACK SHOES*1GK, 1WJ, 3FJ, 4NF, 4SF

8.00" (203.2 mm) PITCH – 20 mm BOLT

TYPE WIDTH PART NUMBERTriple Grouser 23.6" (600 mm) 093-1951Triple Grouser 31.5" (800 mm) 093-1952Triple Grouser 35.4" (900 mm) 096-0257

* Also adaptable to MS300LC-8 machines.

E300 TRACK SHOES*1KG, 2CF

7.50" (190.5 mm) PITCH – 20 mm BOLT

TYPE WIDTH PART NUMBERTriple Grouser 23.6" (600 mm) 093-1949Triple Grouser 31.5" (800 mm) 093-1950

* Also adaptable to MS300LC-8 machines.

E300B, EL300B, EL300 SPROCKETS*8.00" (203.2 mm) PITCH

(PER SIDE) QUANTITY PART NUMBERSprocket Assembly 1 099-4129Bolt 16 6V-6788Washer 16 8T-4123* Also adaptable to MS300LC-8 machines.


734

E300B, EL300B, E300, EL300E300 SPROCKETS*7.50" (190.5 mm) PITCH

(PER SIDE) QUANTITY PART NUMBERSprocket Assembly 1 094-2576Bolt 16 6V-6788Washer 16 8T-4123* Also adaptable to MS300LC-8 machines.

E300B, EL300B, EL300 IDLERS*(PER SIDE) QUANTITY PART NUMBERComponents of GroupIdler Assembly 1 096-0253Bushing Assembly 2 093-1843Shaft 1 093-1694Bearing Block 2 093-9871Seal – Duo-Cone Group 2 093-1418Seal – Shaft O-Ring 2 095-1551


E300 IDLERS*(PER SIDE) QUANTITY PART NUMBERComponents of GroupIdler Assembly 1 094-2491Bushing Assembly 2 093-1843Shaft 1 093-1694Bearing Block 2 093-9871Seal – Duo-Cone Group 2 093-1418Seal – Shaft O-Ring 2 095-1551


E300B, EL300B, EL300 CARRIER ROLLERS*(PER MACHINE) QUANTITY PART NUMBERGroup 4 096-0330


Bushing 2 094-0563Seal – Duo-Cone Group 1 093-1413Seal – Cover 1 8T-5376Seal – Shaft O-Ring 1 6V-7658

4 Roller shell not serviced.

735

E300B, EL300B, E300, EL300* Also adaptable to MS300-8 and MS300LC-8 machines.

E300 CARRIER ROLLERS*(PER MACHINE) QUANTITY PART NUMBERGroup 4 096-5260


Bushing 2 094-0563Ring 1 095-0928Seal – Duo-Cone Group 1 093-1413Seal – Cover 1 8T-5376Seal – Shaft O-Ring 1 095-1663


E300B, EL300B, EL300 TRACK ROLLERS*(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) 16 085-4973Components of GroupRoller Shell (SF) – – (6)

Bushing 2 093-1841Ring 2 093-1736Seal – Duo-Cone Group 2 096-0883Seal – Shaft O-Ring 2 6V-7609Plug 1 095-0967Mounting Hardware (7)

Bolt 4 093-9886Washer 4 099-7241* Also adaptable to MS300LC-8 machines.



Bushing 2 093-1841End Collar 2 094-6391Seal – Duo-Cone Group 2 096-0883

5 Roller shell not serviced.6 Roller shell not serviced7 These components are not included in the roller group; quantities shown are required to mount each roller.

736

E300B, EL300B, E300, EL300E300 TRACK ROLLERS* (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERSeal – Shaft O-Ring 2 095-1578Plug 1 095-0967Mounting Hardware (8)

Bolt 4 093-9886Washer 4 099-7241* Also adaptable to MS300LC-8 machines.

E300B, EL300B, EL300 END GUIDING GUARDS*(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 099-4150Bolt 8 093-0245Washer 8 095-0820* Also adaptable to MS300-8 and MS300LC-8 machines.


737

E450E450 TRACK*

3HG, 3JG8.50" (215.9 mm) PITCH – 22 mm BOLT

QUANTITYUNSEALED PARTNUMBER

Link Assembly – 50 Section 2 7I-9091Components of Link AssemblyTrack LinksRH Master 1 096-9945LH Master 1 096-9947RH Regular 49 096-9944LH Regular 49 096-9946Other ComponentsPin 49 093-0510Master Pin 1 093-0523 (1)

Cotter Pin 1 095-0867Bushing 49 093-1892Master Bushing 1 093-1893Spacer 2 093-0044Track Hardware (2)

Bolt 200 093-0268Nut 200 096-0586* Also adaptable to MS450-8 machines.

E450 TRACK SHOES*8.50" (215.9 mm) PITCH – 22 mm BOLT

TYPE WIDTH PART NUMBERTriple Grouser 35.4" (900 mm) 1R-9833

Also adaptable to MS450-8 machines.

E450 SPROCKETS*(PER SIDE) QUANTITY PART NUMBERSprocket Assembly 1 094-6133Bolt 24 096-7011Washer 24 6V-8237* Also adaptable to MS450-8 machines.

1 Serviced replaced by 7I-9087 Pin and 7I-9134 Bar.2 Not part of link assembly; required to assemble track group.

738

E450E450 IDLERS*

(PER SIDE) QUANTITY PART NUMBERComponents of GroupIdler Assembly 1 094-6105 (3)

Bushing Assembly 2 -

Shaft 1 -Bearing Block 2 -

Seal – Duo-Cone Group 2 093-1418Seal – Shaft O-Ring 2 095-1553

* Also adaptable to MS450-8 machines.

E450 CARRIER ROLLERS*(PER MACHINE) QUANTITY PART NUMBERGroup 6 – (4)


Bushing 2 –

Shaft 1 –Ring 1 –

Seal – Duo-Cone Group 1 093-1416Seal – Cover 1 095-1674Seal – Shaft O-Ring 1 –




Bushing 2 –

Shaft 1 –

End Collar 2 –

Seal – Duo-Cone Group 2 093-1418Seal – Shaft O-Ring 2 8T-3338Plug 1 095-0967Mounting Hardware (6)

3 Idler no longer serviced.4 Group and Roller Shell no longer serviced.5 Roller shell not serviced.6 These components are not included in the roller group; quantities shown are required to mount each roller.

739

E450E450 TRACK ROLLERS* (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERBolt 4 093-0233Washer 4 093-0394* Also adaptable to MS450-8 machines.

740

E650E650 TRACK*

3KG, 3LG9.00" (228.6 mm) PITCH – 24 mm BOLT

QUANTITYUNSEALED PARTNUMBER


Components of Link AssemblyTrack LinksRH Master 1 093-2012LH Master 1 093-2011RH Regular 49 093-1985LH Regular 49 –

Other ComponentsPin 49 –Master Pin 1 093-0524Cotter Pin 1 094-4846Bushing 49 093-1894Master Bushing 1 093-1895Spacer 2 093-0045Track Hardware (2)

Bolt 200 093-0271Nut 200 093-0323* Also adaptable to MS650-8 machines.

E650 SPROCKETS*(PER SIDE) QUANTITY PART NUMBERSprocket Assembly 1 – (3)

Bolt 27 8T-0375Washer 27 3B-4516* Also adaptable to MS650-8 machines.

E650 IDLERS*(PER SIDE) QUANTITY PART NUMBERComponents of GroupIdler Assembly 1 – (4)

Roller Shell 2 –Bushing 1 –

Shaft 2 –

1 Link Assembly no longer serviced.2 Not part of link assembly; required to assemble track group.3 Sprocket no longer serviced.4 Idler no longer serviced.

741

E650E650 IDLERS* (Cont'd.)(PER SIDE) QUANTITY PART NUMBERSeal – Duo-Cone Group 2 –

Seal – Shaft O-Ring 2 095-1557


E650 CARRIER ROLLERS*(PER MACHINE) QUANTITY PART NUMBERGroup 6 – (5)


Bushing 2 –

Shaft 1 –

Seal – Duo-Cone Group 1 093-1416Seal – Cover 1 095-1674Seal – Shaft O-Ring 1 –


E650 TRACK ROLLERS*(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) 14 – (5)


Bushing 2 096-0251Shaft 1 – (6)

End Collar 2 096-0305Ring 2 099-5200Seal – Duo-Cone Group 2 093-1420Seal – Shaft O-Ring 2 095-1673Plug 1 176-8618Mounting Hardware (7)

Bolt 4 094-4829Washer 4 3P-3419* Also adaptable to MS650-8 machines.

5 Group and Roller Shell no longer serviced.6 Shaft not serviced.7 These components are not included in the roller group; quantities shown are required to mount each roller.

743

Timberking511, TK711 .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 744521, 522, TK721, TK722, TK741 .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 749532, 541, TK732 .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 753551, 552, TK751, TK752.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 756

744

511, TK711511, TK711 GREASE TRACK /POSITIVE PIN RETENTION 2 (PPR2)

51100001-UP, 10100249-UP8.00" (203.2 mm) PITCH 20 mm BOLT

QUANTITY PART NUMBERLink Assembly – 46 Section 2 261-1024Track LinksRH Regular 46 261-1011LH Regular 46 261-1012Other ComponentsPin 45 261-1013Master Pin 1 261-1014Bushing 45 261-1015Master Bushing 1 261-1016Seal Assembly (Rigid) 90 261-1021Master Seal Assembly (Rigid) 2 261-1022Thrust Ring 90 261-1017Master Thrust Ring 2 261-1018Track Hardware (1)

Bolt 184 306-2148Nut 184 9W-3361

TK711 GREASE TRACK10100001-00248

7.50" (190.5 mm) PITCH 3/4" BOLT

QUANTITY PART NUMBERLink Assembly – 50 Section 2 206-1469Track LinksRH Pin End Master 1 106-1627LH Pin End Master 1 106-1628RH Bushing End Master 1 106-1629LH Bushing End Master 1 106-1630RH Regular 49 106-1625LH Regular 49 106-1626Other ComponentsPin 50 206-1470Bushing 50 106-1618Seal Assembly (Rigid) 90 250-3988Thrust Ring 88 152-8069Track Hardware (1)

Bolt 196 6V-1792Nut 196 1S-1860Master Bolt 2 106-1642Master Bolt 2 107-0719


745

511, TK711511, TK711 TRACK SHOES8.00" (203.2 mm) PITCH - 20 mm BOLT

TYPE WIDTH PART NUMBERExtreme Service (Trapezoidal Opening) (Clip Grouser) 23.6" (600 mm) 6I-9854Double Grouser (Trapezoidal Opening) 23.6" (600 mm) 152-8628Double Grouser (Trapezoidal Opening) 27.6" (700 mm) 3Q-6993Triple Grouser (Center Punched Shoes) 35.4" (900 mm) 6I-8651Triple Grouser (Center Punched Shoes) (Tri) (RH) 35.4" (900 mm) 290-2269Triple Grouser (Center Punched Shoes) (Tri) (LH) 35.4" (900 mm) 290-2270

TK711 TRACK SHOES7.50" (190.5 mm) PITCH - 3/4" BOLT



Extreme Service (Trapezoidal Opening) (Clip Grouser) 24.0" (610 mm) 207-4873 207-4874Double Grouser (Trapezoidal Opening) 23.6" (600 mm) 224-7269 224-7732Double Grouser (Trapezoidal Opening) 27.6" (700 mm) 206-1479 206-1480Triple Grouser (Heavy Duty Center Punched Slots) 35.4" (900 mm) 206-1476 206-1477

511, TK711 SPROCKETS8.00" (203.2 mm) PITCH

(PER SIDE) QUANTITY PART NUMBERSprocket Rim (21 Tooth) 1 6Y-4898Bolt 18 8T-6430

TK711 SPROCKETS7.50" (190.5 mm) PITCH

(PER SIDE) QUANTITY PART NUMBERSprocket Rim (23 Tooth) 1 206-3065Bolt 18 8T-6430

511, TK711 IDLERS8.00" (203.2 mm) PITCH

(PER MACHINE) QUANTITY PART NUMBERGroup 2 115-3696Components of GroupIdler Assembly 1 115-7471Bearing (2) 2 6Y-2272Shaft 1 112-9951Bearing Blocks 2 115-3697Pin 2 6Y-2266


746

511, TK711511, TK711 IDLERS8.00" (203.2 mm) PITCH(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERGroup 2 115-3696

Seal – Duo-Cone™ Group 2 109-0885Toric Ring (3) 2 6Y-2270Seal – Shaft-O-Ring 2 8F-8882Stopper 1 9G-5664Plug 1 7H-3171

TK711 IDLERS7.50" (190.5 mm) PITCH


Components of GroupIdler Assembly 1 115-7471Bearing (3) 2 6Y-2272Shaft 1 112-9951Bearing Blocks 2 115-3697Pin 2 6Y-2266Seal – Duo-Cone Group 2 109-0885Toric Ring (3) 2 6Y-2270Seal – Shaft-O-Ring 2 8F-8882Stopper 1 9G-5664Plug 1 7H-3171

511, TK711 CARRIER ROLLERS8.00" (203.3 mm) PITCH

(PER MACHINE) QUANTITY PART NUMBERRoller Group (Star Design) 6 228-6404

Roller Group (SF) (4) 1 206-1264

Roller Group (SF) (Circular Design) (4) 6 206-1264

Mounting Hardware (For Both Designs) (5)


3 Component of preceding assembly or group; quantity shown is quantity per assembly or group.4 Refer to track roller table for component breakdown.5 Not part of roller group, quantities shown are required to mount each roller group.

747

511, TK711TK711 CARRIER ROLLERS

7.50" (190.5 mm) PITCH

(PER MACHINE) QUANTITY PART NUMBERRoller Group (Star Design) 6 228-6403

Roller Group (SF) (6) 1 197-4161

Roller Group (SF) (Circular Design) (6) 6 197-4161

Mounting Hardware (For Both Designs) (7)


511, TK711 TRACK ROLLERS8.00" (203.2 mm) PITCH

(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) Roller Group 4 206-1264 (8)

Double Flange (DF) Roller Group 14 206-1263

Components of GroupRoller Shell (SF) 1 206-9257Roller Shell (DF) 1 206-1262Bushing 2 6Y-1782Shaft 1 206-9260End Collar 2 158-8086Pin 2 159-9526Seal – Duo-Cone Group (Symmetrical) 2 206-9212Toric Ring (9) 2 171-5713Seal – Shaft O-Ring 2 8F-6711Plug 1 9W-2146Mounting Hardware (10)


TK711 TRACK ROLLERS7.50" (190.5 mm) PITCH


Components of GroupRoller Shell (SF) 1 205-3594Bearing (9) 2 6I-9399Shaft 1 200-6432

6 Refer to track roller table for component breakdown.7 Not part of roller group, quantities shown are required to mount each roller group.8 Position next to idler and sprocket (front and rear position).9 Component of preceding assembly or group, quantity shown is quantity per assembly or group.10 These components are not included in the roller group; quantities shown are required to mount each roller.

748

511, TK711TK711 TRACK ROLLERS7.50" (190.5 mm) PITCH(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) Roller Group 18 197-4161

End Collar 2 158-8086Pin 2 159-9526Seal – Duo-Cone Group (Symmetrical) 2 206-9212Toric Ring (11) 2 171-5713Seal – Shaft O-Ring 2 8F-6711Plug 1 9W-2146Mounting Hardware (12)


11 Component of preceding assembly or group, quantity shown is quantity per assembly or group.12 These components are not included in the roller group; quantities shown are required to mount each roller.

749

521, 522, TK721, TK722, TK741521, 522, TK721, TK722, TK741 GREASE TRACK

ONE PIECE MASTER LINKS521, 52100001-UP; 522, 52200001-UP; TK721, 10200352-UP; TK722, 10300453-UP; TK741, 20200229-UP

8.00" (203.3 mm) PITCH - 3/4" BOLTQUANTITY PART NUMBER


Components of Link AssemblyTrack LinksRH Master (Full) 1 266-7271LH Master (Full) 1 266-7272RH Regular 48 365-8401LH Regular 48 365-8402Other ComponentsPin 48 198-1125Master Pin 1 265-5109Bushing 48 8E-7222Master Bushing 1 269-4027Seal Assembly (Rigid) 96 207-0544Seal Assembly - Master (Rigid) 2 269-7103Thrust Ring 96 152-8071Thrust Ring - Master 2 269-4004Track Hardware (2)

Bolt 196 6V-1792Nut 196 1S-1860

TK721, TK722, TK741 GREASE TRACKSPLIT MASTER LINKS

TK721, 10200001-10200351; TK722, 10300001-10300452; TK741, 20200001-202002288.00" (203.3 mm) PITCH - 3/4" BOLT


Components of Link AssemblyTrack LinksRH Pin End Master 1 8E-7407LH Pin End Master 1 8E-7408RH Bushing End Master 1 8E-7409LH Bushing End Master 1 8E-7410RH Regular 48 365-8401LH Regular 48 365-8402Other ComponentsPin 49 198-1125Bushing 49 8E-7222

1 Service Replaced by 369-0854.2 Not part of link assembly; required to assemble track group.

750

521, 522, TK721, TK722, TK741TK721, TK722, TK741 GREASE TRACKSPLIT MASTER LINKSTK721, 10200001-10200351; TK722, 10300001-10300452; TK741, 20200001-202002288.00" (203.3 mm) PITCH - 3/4" BOLT(Cont'd.)


Seal Assembly (Rigid) 98 207-0544Thrust Ring 98 152-8071Track Hardware (3)

Bolt 192 6V-1792Nut 192 1S-1860Master Bolt 4 9S-1838

521, 522, TK721, TK722, TK741 TRACK SHOES8.00" (203.3 mm) PITCH 3/4" BOLT


NUMBERExtreme Service (Trapezoidal Opening) (Clipped Grouser) 24.0" (610 mm) 207-5897Extreme Service (Trapezoidal Opening) (Clipped Grouser) 28.0" (710 mm) 207-5283Double Grouser (Trapezoidal Opening) 24.0" (610mm) 150-7865Double Grouser (Trapezoidal Opening) 27.6" (700 mm) 209-4535Triple Grouser (Heavy Duty) (Center Punched Shoes) (Tri) (RH) 35.4" (900 mm) 287-8269Triple Grouser (Heavy Duty) (Center Punched Shoes) (Tri) (LH) 35.4" (900 mm) 287-8270

TK721, TK722, TK741 TRACK SHOES8.00" (203.2 mm) PITCH - 3/4" BOLT


NUMBERMASTER SHOE PART

NUMBERExtreme Service (TrapezoidalOpening) (Clipped Grouser)

24.0" (610 mm) 207-5897 207-5898

Extreme Service (TrapezoidalOpening) (Clipped Grouser)

28.0" (710 mm) 207-5283 207-5284

Double Grouser(Trapezoidal Opening)

24.0" (610 mm) 150-7865 150-7866

Double Grouser(Trapezoidal Opening)

27.6" (700 mm) 209-4535 209-4536

Triple Grouser (Heavy Duty)(Center Punched Slots)

35.4" (900 mm) 200-4274 200-4275 (4)

3 Service Replaced by 369-0854.3 Not part of link assembly; required to assemble track group.4 Double grouser shoe with trapezoidal opening.

751

521, 522, TK721, TK722, TK741521, 522, TK721, TK722, TK741 SPROCKETS

(PER SIDE) QUANTITY PART NUMBERSprocket Rim (25 Tooth) 1 207-3658Bolt 16 7X-2575

521, 522, TK721, TK722, TK741 IDLERS(PER MACHINE) QUANTITY PART NUMBERIdler Group 2 207-0469

Components of GroupIdler Assembly 1 207-0472Bearing (5) 2 6Y-2272Shaft 1 112-9951Bearing Blocks 2 115-3697Pin 2 6Y-2266Seal – Duo-Cone Group 2 109-0885Toric Ring (5) 2 6Y-2270Seal – Shaft-O-Ring 2 8F-8882Stopper 1 9G-5664Plug 1 7H-3171

521, 522, TK721, TK722, TK741 CARRIER ROLLERS(PER MACHINE) QUANTITY PART NUMBERRoller Group (Star Design) 4 254-4095

Roller Group (SF) (6) 1 206-1264Mounting Hardware (7)


521, 522, TK721, TK722, TK741 TRACK ROLLERS(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) Roller Group 2 206-1264 (8)


Components of GroupRoller Shell (SF) 1 206-9257Roller Shell (DF) 1 206-1262Bushing 2 6Y-1782Shaft 1 206-9260

5 Component of preceding assembly or group; quantity shown is quantity per assembly or group.6 Refer to track roller table for component breakdown.7 Not part of roller group, quantities shown are required to mount each roller group.8 Position next to idler (front position).

752

521, 522, TK721, TK722, TK741521, 522, TK721, TK722, TK741 TRACK ROLLERS (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) Roller Group 2 206-1264 (8)


End Collar 2 158-8086Pin 2 159-9526Seal – Duo-Cone Group (Symmetrical) 2 206-9212Toric Ring (9) 2 171-5713Seal – Shaft O-Ring 2 8F-6711Plug 1 9W-2146Mounting Hardware (10)


522, TK722 TRACK ROLLER GUARDS (FULL LENGTH)(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 8 207-0476Spacer 16 152-8555Bolt (24 mm) (340 mm length) 16 127-4834Nut 48 8T-4001Bolt (24 mm) (70 mm length) 32 7X-2576Washer 96 8T-4167

8 Position next to idler (front position).9 Component of preceding assembly or group, quantity shown is quantity per assembly or group.10 These components are not included in the roller group; quantities shown are required to mount each roller.

753

532, 541, TK732532, 541, TK732 GREASE TRACK

532, 53200001-UP; 541, 54100001-UP; TK732, 10400001-UP8.50" (215.9 mm) PITCH - 22 mm BOLT

QUANTITY PART NUMBERLink Assembly – 47 Section 2 213-1975Track LinksRH Regular 47 6Y-2589LH Regular 47 6Y-2590Other ComponentsPin 46 6Y-2751Master Pin 1 6Y-2748Bushing 46 321-1463Master Bushing 1 201-0828Seal (Poly W) 92 179-3426Master Seal (Poly W) 2 179-3428Track Hardware (1)

Bolt 188 318-2558Nut 188 311-8150

532, 541, TK732 TRACK SHOES8.50" (215.9 mm) PITCH - 22 mm BOLT

TYPE WIDTH PART NUMBERExtreme Service (Trapezoidal Opening) (Clip Grouser) 23.6" (600 mm) 331-3631Extreme Service (Trapezoidal Opening) (Clip Grouser) 27.6" (700 mm) 331-3633Double Grouser (Trapezoidal Opening) (Clip Grouser) 27.6" (700 mm) 196-4083

532, 541, TK732 SPROCKETS(PER SIDE) QUANTITY PART NUMBERSprocket Rim (23 Tooth) 1 6Y-5685Bolt 16 7X-2575

532, 541, TK732 IDLERS(PER MACHINE) QUANTITY PART NUMBERIdler Group 2 136-2422Components of GroupIdler Assembly 1 136-3847Shaft 1 6Y-8028Bearing Blocks 2 115-3699Pin 2 6Y-8029Seal – Duo-Cone Group 2 109-0881


754

532, 541, TK732532, 541, TK732 IDLERS (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERSeal - Shaft O- Ring 2 1H-7339Plug 1 7H-3171

532, 541, TK732 CARRIER ROLLERSSTAR DESIGN


Roller Group 1 183-2874

Components of GroupRoller Shell (SF) 1 183-2875Bearing (2) 2 6Y-2792Shaft 1 183-2883End Collar 2 179-1497Pin 2 179-1499Seal – Duo-Cone Group 2 148-3533Toric Ring (2) 2 160-6631Seal - Shaft O- Ring 2 8F-8882Plug 1 9W-2146

532, 541, TK732 TRACK ROLLERS(PER MACHINE) QUANTITY PART NUMBERDouble Flange (DF) 18 183-2879Components of GroupRoller Shell (DF) 1 183-2880Bearing (2) 2 6Y-2792Shaft 1 183-2883End Collar 2 179-1497Pin 2 179-1499Seal – Duo-Cone Group 2 148-3533Toric Ring (2) 2 160-6631Seal - Shaft O- Ring 2 8F-8882Plug 1 9W-2146Mounting Hardware (3)


2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.3 Not part of roller group, quantities shown are required to mount each roller group.

755

532, 541, TK732532, 541, TK732 TRACK ROLLER GUARDS (FULL LENGTH)

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 8 152-8570Spacer 16 152-8555Bolt (24 mm) (340 mm length) 16 127-4834Nut 48 8T-4001Bolt (24 mm) (70 mm length) 32 7X-2576Washer 96 8T-4167

756

551, 552, TK751, TK752551, 552, TK751, TK752 GREASE TRACK

551, 55100001-UP; 552, 52200001-UP; TK751, 30100001-UP; TK752, 30200001-UP8.50" (215.9 mm) PITCH - 24 mm BOLT

QUANTITY PART NUMBERLink Assembly – 47 Section 2 256-6081Track LinksRH Regular 47 305-9363LH Regular 47 305-9364Other ComponentsPin 46 8E-4272Master Pin 1 253-2740Bushing 46 227-3029Master Bushing 1 251-8368Seal Assembly (Rigid) 92 250-3998Master Seal Assembly (Rigid) 2 251-7757Thrust Ring 92 3P-0623Master Thrust Ring 2 251-8364Stopper 1 7G-4332Plug 1 6Y-0473Track Hardware (1)

Bolt 188 301-2299Nut 188 150-4742

551, 552, TK751, TK752 TRACK SHOES8.50" (215.9 mm) PITCH - 24 mm BOLT

TYPE WIDTH PART NUMBERExtreme Service (Trapezoidal Opening) (Clip Grouser) 23.6" (600 mm) 331-9804Extreme Service (Trapezoidal Opening) (Clip Grouser) 28.0" (710 mm) 331-9805

551, 552, TK751, TK752 SPROCKETS(PER SIDE) QUANTITY PART NUMBERSprocket Rim (23 Tooth) 1 166-3729Bolt 16 7X-2575

551, 552, TK751, TK752 IDLERS(PER MACHINE) QUANTITY PART NUMBERIdler Group 2 136-2422Components of GroupIdler Assembly 1 136-3847Bearing (2) 2 6Y-8023


757

551, 552, TK751, TK752551, 552, TK751, TK752 IDLERS (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERShaft 1 6Y-8028Bearing Blocks 2 7Y-1248Pin 2 6Y-8029Seal – Duo-Cone Group 2 109-0881Toric Ring (3) 2 5P-9120Seal - Shaft O- Ring 2 1H-7339Plug 1 7H-3171

551, 552, TK751, TK752 CARRIER ROLLERSSTAR DESIGN

(PER MACHINE) QUANTITY PART NUMBERCarrier Roller Group 4 228-6405Roller Group 1 183-2874Components of GroupRoller Shell (SF) 1 183-2875Bearing (3) 2 6Y-2792Shaft 1 183-2883End Collar 2 179-1497Pin 2 179-1499Seal – Duo-Cone Group 2 148-3533Toric Ring (3) 2 160-6631Seal - Shaft O- Ring 2 8F-8882Plug 1 9W-2146

551, 552, TK751, TK752 TRACK ROLLERS(PER MACHINE) QUANTITY PART NUMBERDouble Flange (DF) 18 183-2879Components of GroupRoller Shell (DF) 1 183-2880Bearing (3) 2 6Y-2792Shaft 1 183-2883End Collar 2 179-1497Pin 2 179-1499Seal – Duo-Cone Group 2 148-3533Toric Ring (3) 2 160-6631Seal - Shaft O- Ring 2 8F-8882Plug 1 9W-2146Mounting Hardware (4)

3 Component of preceding assembly or group; quantity shown is quantity per assembly or group.4 Not part of roller group, quantities shown are required to mount each roller group.

758

551, 552, TK751, TK752551, 552, TK751, TK752 TRACK ROLLERS (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERBolt 4 7X-2454Washer 4 8T-4167

551, 552, TK751, TK752 TRACK ROLLERS GUARDS (FULL LENGTH)(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 8 152-8570Spacer 16 152-8555Bolt (24 mm) (340 mm length) 16 127-4834Nut 48 8T-4001Bolt (24 mm) (70 mm length) 32 7X-2576Washer 96 8T-4167

759

Mini Hydraulic Excavators302.7D, 302.4D, 302.2D, 301.8C, 301.7D, 301.6C, 301.8, 301.6, 301.5, 301.4C, 300.9D.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 760303.5E, 303.5D, 303.5CCR, 303E, 303CCR, 302.5C, 303CR, 303.5, 302.5 .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 765304D, 304E, 304CCR, 305CCR, 304CR, 305CR, 304.5, 305.5, 306E, 306 ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 772308E, 308D, 307D, 308C, 307C, 307B, 307 .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 780

760

302.7D, 302.4D, 302.2D, 301.8C, 301.7D, 301.6C, 301.8, 301.6, 301.5, 301.4C, 300.9D300.9D RUBBER TRACKS

(PER MACHINE) QUANTITY WIDTH PART NUMBERRubber Track 2 7.08” (180 mm) 367-4063

300.9D SPROCKETS(PER SIDE) QUANTITY PART NUMBERSprocket (12 Tooth) 2 372-5983Bolt (M10 x 1.5 x 40 mm) 16 101-7398Washer 6 372-5926

300.9D IDLERS(PER MACHINE) QUANTITY PART NUMBERWheel Assembly 2 373-1788

300.9D ROLLERS(PER MACHINE) QUANTITY PART NUMBERRoller Group 8 372-5958Bolt 8 101-7402Washer 8 375-3963

301.4C RUBBER TRACKS(PER MACHINE) QUANTITY WIDTH PART NUMBERRubber Track 2 9.05” (230 mm) 375-5039Rubber Track 2 11.81” (300 mm) 430-3220

301.4C SPROCKETS(PER SIDE) QUANTITY PART NUMBERSprocket (21 Tooth) 2 372-5983Bolt (M10 x 1.5 x 30 mm) 16 101-7398Washer 6 372-5926

301.4C IDLERS(PER MACHINE) QUANTITY PART NUMBERIdler 2 379-2885Shaft 2 379-2574Set Screw 2 379-2627Bearing 4 379-2549Retainer Ring 4 379-2536Seal 4 379-2552

761

302.7D, 302.4D, 302.2D, 301.8C, 301.7D, 301.6C, 301.8, 301.6, 301.5, 301.4C, 300.9D301.4C ROLLERS

(PER MACHINE) QUANTITY PART NUMBERRoller Group 12 381-3040Bolt (Socket Head) 24 381-2756Washer 24 372-5926

301.8C, 301.6C RUBBER TRACKSJBB, JSB

(PER MACHINE) QUANTITY WIDTH PART NUMBERRubber Track 2 9.1" (231.5 mm) 374-3462

301.8, 301.6 RUBBER TRACKSBDH, BFA

(PER MACHINE) QUANTITY WIDTH PART NUMBERRubber Track 2 9.1" (231.5 mm) 234-9369

301.5 RUBBER TRACKS3YW

(PER MACHINE) QUANTITY WIDTH PART NUMBERBelt - Rubber 2 9.1" (231.5 mm) 234-9368

301.8C, 301.6C, 301.8, 301.6, 301.5 SPROCKETS(PER SIDE) QUANTITY PART NUMBERSprocket (19 Tooth) 1 139-4304

Bolt (10 mm) 9 105-3484

301.8C, 301.6C, 301.8, 301.6, 301.5 IDLERS(PER MACHINE) QUANTITY PART NUMBERIdler Assembly 2 226-4049Components of Idler AssemblyIdler 1 –Shaft 1 139-6270Ring - Retaining 2 6V-7644Bearing- Ball 2 1B-3867Seal 2 139-6364Ring - Retaining 2 8T-9598

762

302.7D, 302.4D, 302.2D, 301.8C, 301.7D, 301.6C, 301.8, 301.6, 301.5, 301.4C, 300.9D301.8C, 301.6C ROLLERS

(PER MACHINE) QUANTITY PART NUMBERRoller Assembly (Ends) (Includes Shaft) 6 232-4466Mounting Hardware (1)

Bolt (12 mm) 2 8T-4139Washer 2 8T-4223

301.8, 301.6, 301.5 ROLLERS(PER MACHINE) QUANTITY PART NUMBERRoller Assembly (Ends) (Includes Shaft) 4 232-4466

Roller Assembly (Middle) (Includes Shaft) 2 139-6261Components of Roller Assembly 139-6261Bearing- Ball 2 096-9296Ring - Retaining 2 7Y-5267Plug 1 085-8893Mounting Hardware (1)

Bolt (12 mm) 2 8T-4192Washer 2 8T-4223

301.7D RUBBER TRACKSLJH, LJ8, LJD

(PER MACHINE) QUANTITY WIDTH PART NUMBERRubber Track 2 9.05” (230 mm) 375-5039Rubber Track 2 9.05” (230 mm) 390-2333


301.7D IDLERS(PER MACHINE) QUANTITY PART NUMBERIdler 2 379-2885Shaft 2 393-2171Plug 2 393-2172

1 These components are not included in the roller assembly; quantities shown are required to mount each roller.

763

302.7D, 302.4D, 302.2D, 301.8C, 301.7D, 301.6C, 301.8, 301.6, 301.5, 301.4C, 300.9D301.7D ROLLERS

(PER MACHINE) QUANTITY PART NUMBERRoller 12 381-3040Bolt (M10 x 1.5 x 30 mm) 12 101-7404Washer 12 372-5926

302.4D RUBBER TRACKS(PER MACHINE) QUANTITY WIDTH PART NUMBERRubber Track 2 9.84” (250 mm) 390-2335


302.4D IDLERS(PER MACHINE) QUANTITY PART NUMBERIdler 2 379-2885Shaft 2 393-2171Plug 2 393-2172

302.4D ROLLERS(PER MACHINE) QUANTITY PART NUMBERRoller 12 386-0791Bolt (M14 x 2 x 30 mm) 24 096-9988Washer 24 386-0637

302.7D RUBBER TRACKS(PER MACHINE) QUANTITY WIDTH PART NUMBERRubber Track 2 11.81” (300 mm) 430-3220


764

302.7D, 302.4D, 302.2D, 301.8C, 301.7D, 301.6C, 301.8, 301.6, 301.5, 301.4C, 300.9D302.7D IDLERS

(PER MACHINE) QUANTITY PART NUMBERWheel Assembly 2 386-0792

302.7D ROLLERS(PER MACHINE) QUANTITY PART NUMBERRoller 12 386-0782Bolt (M14 x 2 x 30 mm) 12 096-9988Washer 12 386-0637

765

303.5E, 303.5D, 303.5CCR, 303E, 303CCR, 302.5C, 303CR, 303.5, 302.5303CCR RUBBER TRACKS

BXT(PER MACHINE) QUANTITY WIDTH PART NUMBERRubber Track 2 11.8" (300 mm) 263-9250

303E, 303CR RUBBER TRACKSCAR, DMA, CR7, SMG

(PER MACHINE) QUANTITY WIDTH PART NUMBERRubber Track 2 11.8" (300 mm) 233-2048

303.5D, 303.5CCR RUBBER TRACKSRHP, DMY


303.5 RUBBER TRACKSAFW, DCH


302.5C RUBBER TRACKSGBB


302.5 RUBBER TRACKS4AZ

(PER MACHINE) QUANTITY WIDTH PART NUMBERRubber Track (SN 4AZ1-6294) 2 11.8" (300 mm) 146-6062Rubber Track (SN 4AZ6295-UP) 2 11.8" (300 mm) 374-3463

303.5E RUBBER TRACKSRKY, RSE, SFH


303.5E, 303.5D, 303.5CCR, 303CCR STEEL TRACKRHP, DMY, BXT

4.00" (101.6 MM) PITCH

QUANTITY PART NUMBERTrack Assembly - 46 Section 2 263-9252Components of Track Assembly

766

303.5E, 303.5D, 303.5CCR, 303E, 303CCR, 302.5C, 303CR, 303.5, 302.5303.5E, 303.5D, 303.5CCR, 303CCR STEEL TRACKRHP, DMY, BXT4.00" (101.6 MM) PITCH(Cont'd.)

QUANTITY PART NUMBERTrack Assembly - 46 Section 2 263-9252Link Assembly 1 263-9253RH Master 1 158-4678LH Master 1 158-4679RH Regular 45 158-4676LH Regular 45 158-4677Pin 45 158-4681Master Pin (Slip Fit) 1 158-4682Bushing 45 158-4680Master Bushing 1 260-6400Cotter 1 158-4683Double Grouser Track Shoe 12.0" (300 mm) (1) 46 158-4684Rubber Track Pad Offerings and Mounting Hardware (Mountsto Double Grouser Shoe)Rubber Pad (300 mm) (With 2 Mounting Studs) 46 184-2184Nut (12 mm) 92 6V-8149Washer 92 3B-4508Rubber Pad (300 mm) (With 1 Mounting Bolt and Side Clip) 46 212-5118Bolt (12 mm) 46 8T-4192Washer 46 3B-4508

303E, 303CR, 303.5 STEEL TRACKCAR, DMA, AFW, DCH, CR7, SMG

4.00" (101.6 mm) PITCH

QUANTITY PART NUMBERTrack Assembly - 43 Section 2 163-7538Components of Track AssemblyLink Assembly 1 163-7539RH Master 1 158-4678LH Master 1 158-4679RH Regular 42 158-4676LH Regular 42 158-4677Pin 42 158-4681Master Pin (Slip Fit) 1 158-4682Bushing 42 158-4680Master Bushing 1 260-6400Cotter 1 158-4683Double Grouser Track Shoe 12.0" (300 mm) (1) 43 158-4684

1 Shoes welded to the link assembly.

767

303.5E, 303.5D, 303.5CCR, 303E, 303CCR, 302.5C, 303CR, 303.5, 302.5302.5C, 302.5 STEEL TRACK

4AZ, GBB

QUANTITY PART NUMBERTrack Assembly - 40 Section 2 153-5985Components of Track AssemblyLink Assembly 1 158-4675RH Master 1 158-4678LH Master 1 158-4679RH Regular 39 158-4676LH Regular 39 158-4677Pin 39 158-4681Master Pin (Slip Fit) 1 158-4682Bushing 39 158-4680Master Bushing 1 260-6400Cotter 1 158-4683Double Grouser Track Shoe 12.0" (300 mm) (2) 40 158-4684

303E, 303CR SPROCKETS(PER SIDE) QUANTITY PART NUMBERSprocket (21 Tooth) 1 193-7091

Bolt (12 mm) 9 8T-4956Washer 9 8T-4223

303.5CCR, 303CCR SPROCKET(PER SIDE) QUANTITY PART NUMBERSprocket (23 Tooth) 1 264-5371

Bolt (12 mm) 11 8T-4139Washer 11 8T-4223

303.5 SPROCKETS(PER SIDE) QUANTITY PART NUMBERSprocket (21 Tooth) 1 172-1965Bolt (12 mm) 9 8T-4956Washer 9 8T-4223

302.5C, 302.5 SPROCKETS(PER SIDE) QUANTITY PART NUMBERSprocket (21 Tooth) 1 140-4022

Bolt (12 mm) (Model 302.5) 9 101-7402Bolt (12 mm) (Model 302.5C) 9 6V-8200

2 Shoes welded to the link assembly.

768

303.5E, 303.5D, 303.5CCR, 303E, 303CCR, 302.5C, 303CR, 303.5, 302.5303.5E, 303.5D, 303.5CCR, 303CCR, IDLERS

(PER MACHINE) QUANTITY PART NUMBERIdler Assembly 2 267-4829Shaft 2 267-4831Seal - Duo-Cone™ Group 4 234-8984Seal –Shaft O-Ring 4 095-1595

303CR, 303.5 IDLERS(PER MACHINE) QUANTITY PART NUMBERIdler Assembly 2 172-2100Components of Idler AssemblyShaft 1 146-0984Bearing- Ball 2 095-7962Ring - Retaining 2 2W-1145Seal - Oil 2 146-0985

302.5C IDLERS(PER MACHINE) QUANTITY PART NUMBERIdler Group 2 – (3)

Other ComponentsIdler Assembly 1 234-8968Shaft 1 234-8967Seal - Duo-Cone Group 2 234-8984Seal –Shaft O-Ring 2 095-1595

302.5 IDLERS(PER MACHINE) QUANTITY PART NUMBERIdler Assembly 2 140-4005Components of Idler AssemblyShaft 1 140-4008Bearing- Ball 2 1B-3867Ring - Retaining 2 8T-9598Seal 2 139-6364

303E, 303.5CCR, 303CCR, CARRIER ROLLERS(PER MACHINE) QUANTITY PART NUMBERCarrier Roller Group (Includes Shaft) 2 266-8794


3 Order Idler Group (RH) 234-6204, or Idler Group (LH) 234-6203. Both of these idler groups contains, idler assembly, idler shaft, cylinder as-sembly, rod assembly, spring, and supports.


769

303.5E, 303.5D, 303.5CCR, 303E, 303CCR, 302.5C, 303CR, 303.5, 302.5303E, 303.5CCR, 303CCR, CARRIER ROLLERS (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERCarrier Roller Group (Includes Shaft) 2 266-8794

Bolt (16 mm) 1 8T-4173Washer 2 7X-0515Nut 2 8T-4132

303CR CARRIER ROLLERS(PER MACHINE) QUANTITY PART NUMBERCarrier Roller Assembly (Includes Shaft) 2 193-7070Components of AssemblyBearing- Ball 2 1B-3867Seal Assembly 1 172-1768Ring - Retaining 1 6V-7644Cap Assembly 1 172-1769Mounting Hardware (5)

Bolt (10 mm) 1 8T-4178Washer 2 8T-4121Nut 2 8T-4133

302.5C, 303.5, 302.5 CARRIER ROLLERS(PER MACHINE) QUANTITY PART NUMBERCarrier Roller Assembly (Includes Shaft) 2 146-6064Components of AssemblyBearing- Ball 2 1B-3867Ring - Retaining 2 6V-7644Ring - Retaining 1 8T-9598Seal - Oil 1 140-4338Mounting Hardware (5)

Bolt (10 mm) (For models 303.5, 302.5) 1 8T-4178Washer (For models 303.5, 302.5) 2 8T-4121Nut (For models 303.5, 302.5) 2 8T-4133Bolt (10 mm) (For model 302.5C) 1 8T-4172Nut (For model 302.5C) 1 096-4883

302.5C ROLLERS(PER MACHINE) QUANTITY PART NUMBERRoller Group 6 266-8793Components of Group


770

303.5E, 303.5D, 303.5CCR, 303E, 303CCR, 302.5C, 303CR, 303.5, 302.5302.5C ROLLERS (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERRoller Group 6 266-8793

Shaft Assembly 1 266-8793Collar 1 234-8958Seal - Duo-Cone Group 2 234-8959Seal - Shaft O-ring 1 095-1657Ring - Retaining 1 234-8962Plug 1 9F-2247Mounting Hardware (6)

Bolt (16 mm) 2 7X-2553Washer 2 7X-0515

303E, 303.5E, 303.5D, 303.5CCR, 303CCR ROLLERS(PER MACHINE) QUANTITY PART NUMBERRoller Assembly (Center Flange) (Includes Shaft) 8 266-8793Mounting Hardware (6)

Bolt (16 mm) 16 8T-7338Washer 16 7X-0515

303CR, 303.5, 302.5 ROLLERS(PER MACHINE) QUANTITY PART NUMBERRoller Assembly (Center Flange) (Includes Shaft) - (7) 185-7280Components of AssemblyBearing- Ball 2 1B-3867Ring - Retaining 2 8T-9598Seal - Oil 2 140-4338Ring - Retaining 2 234-8962Plug 1 085-8893Mounting Hardware (6)

Bolt (10 mm) 4 8T-4182Washer 4 8T-4121

303.5E, 303.5D, 303CR, 303.5, 302.5 ROLLERSFOR USE WITH STEEL TRACK

(PER MACHINE) QUANTITY PART NUMBERGard Assembly - RH 2 263-9268Guard Assembly - LH 2 263-9267

6 These components are not included in the roller assembly; quantities shown are required to mount each roller.7 8 Roller Groups on 303CR and 303.5, 6 Roller Groups on 302.5.

771

303.5E, 303.5D, 303.5CCR, 303E, 303CCR, 302.5C, 303CR, 303.5, 302.5303.5E, 303.5D, 303CR, 303.5, 302.5 ROLLERSFOR USE WITH STEEL TRACK(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERBolt (12 mm) 12 8T-4956Washer 12 8T-4223

303CR, 303.5 GUIDING GUARDSFOR USE WITH STEEL TRACK

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly - RH 2 185-0656Guard Assembly - LH 2 185-0657Bolt (12 mm) 12 8T-4192Washer 12 8T-4223

302.5C GUIDING GUARDSFOR USE WITH STEEL TRACK

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly - RH 2 260-2665Guard Assembly - LH 2 260-2666Washer 12 7X-0578Nut 12 096-4883

302.5 GUIDING GUARDSFOR USE WITH STEEL TRACK


772

304D, 304E, 304CCR, 305CCR, 304CR, 305CR, 304.5, 305.5, 306E, 306305E, 303E, 305D, 305.5E, 305.5D, 304CCR, 305CCR RUBBER TRACKS

FPK, HWJ, FLZ, FKY, FSC, YGB, XER, XFA, XSC, WDL, DJX


304CR, 305CR RUBBER TRACKSBTN, NAD, DSA, DMW, DGT


304.5, 305.5 RUBBER TRACKSANR, WAK


305E, 305D, 305.5D, 304CCR, 305CCR TRACK STEELFPK, HWJ, FLZ, FKY, FSC, YGB, XER, XFA, XSC

5.31" (135 mm) PITCH - 12 mm BOLT

QUANTITY PART NUMBERLink Assembly - 40 Section 2 263-9240Track LinksRH Master 1 158-4769LH Master 1 158-4770RH Regular 39 158-4767LH Regular 39 158-4768Other ComponentsPin 39 158-4772Master Pin (Slip Fit) 1 158-4773Bushing 40 158-4771Cotter 1 158-4774Track Hardware (1)

Bolt (12 mm) 160 158-4775Nut 160 158-4776

304CR, 305CR, 304.5, 305.5, 306 STEEL TRACKBTN, NAD, DSA, DMW, ANR, WAK, CXZ, DCK, DGT

5.31" (135 mm) PITCH - 12 mm BOLT

QUANTITY PART NUMBERTrack Group - 38 Section 2 155-6844

Components of Track GroupLink Assembly 1 158-4766RH Master 1 158-4769


773

304D, 304E, 304CCR, 305CCR, 304CR, 305CR, 304.5, 305.5, 306E, 306304CR, 305CR, 304.5, 305.5, 306 STEEL TRACKBTN, NAD, DSA, DMW, ANR, WAK, CXZ, DCK, DGT5.31" (135 mm) PITCH - 12 mm BOLT(Cont'd.)

QUANTITY PART NUMBERTrack Group - 38 Section 2 155-6844LH Master 1 158-4770RH Regular 37 158-4767LH Regular 37 158-4768Pin 37 158-4772Master Pin (Slip Fit) 1 158-4773Bushing 38 158-4771Cotter 1 158-4774Triple Grouser Track Shoe 16.0" (400 mm)(4 extra holes to mount rubber pads)

38 158-4777

Bolt (12 mm) 152 158-4775Nut 152 158-4776Rubber Track Pad Offerings and Mounting Hardware (Mounts to Triple Grouser Shoe)Rubber Pad (400 mm) (With 4 Mounting Studs) 38 163-7093Washer 152 3B-4508Nut (12 mm) 152 139-6411Rubber Pad (400 mm) (With 2 Mounting Bolts and Side Clip) 38 212-5129Bolt (12 mm) 152 8T-4192Washer 152 3B-4508

306 STEEL TRACKQUANTITY PART NUMBER

Track Group - 38 Section 2 333-5631

Components of Track GroupLink Assembly 1 333-5632RH Master 1 333-5629LH Master 1 333-5626RH Regular 37 333-5628LH Regular 37 333-5625Pin 37 333-5616Master Pin (Slip Fit) 1 333-5619Bushing 38 333-5623Cotter 1 333-5639Triple Grouser Track Shoe 16.0" (400 mm) 38 333-5653Bolt 152 333-5651Nut 152 158-4776

774

304D, 304E, 304CCR, 305CCR, 304CR, 305CR, 304.5, 305.5, 306E, 306305D, 305.5E, 305.5D, 304CCR, 305CCR TRACK SHOES

5.31" (135 MM) PITCH - 12 mm BOLT

TYPE WIDTH PART NUMBERTriple Grouser 15.7" (400 mm) 158-4777Rubber Pad (With 4 Mounting Studs) (2) 15.7" (400 mm) 163-7093Washer - 163-7094Nut (12 mm) - 6V-8149Rubber Pad (400 mm) (With 2 Mounting Bolts and Side Clip) (2) 15.7" (400 mm) 212-5129Bolt (12 mm) - 8T-4192Washer - 3B-4508

304D RUBBER TRACKS(PER MACHINE QUANTITY WIDTH PART NUMBERRubber Track 2 13.78” (350 mm) 344-8848Rubber Track 2 13.78” (350 mm) 381-9191 (3)

304D SPROCKETS(PER SIDE) QUANTITY PART NUMBERSprocket (23 Tooth) 2 264-5371Bolt (M12 x 1.75 x 35 mm) 22 8T-4956Washer 22 8T-4223

304D IDLERS(PER MACHINE) QUANTITY PART NUMBERIdler and Bearing Assembly 2 267-4829Bushing 2 154-2233Seal - Duo-Cone 2 234-8984

304D ROLLERS(PER MACHINE) QUANTITY PART NUMBERRoller Gp 8 266-8793Carrier Roller 2 266-8794

304E RUBBER TRACKS(PER MACHINE QUANTITY WIDTH PART NUMBERRubber Track 2 13.78” (350 mm) 381-9191Rubber Track 2 13.78” (350 mm) 344-8848 (4)

2 Pad bolts to triple grouser shoe.3 Optional replacement – Same dimensions.4 Optional replacement - Same dimensions

775

304D, 304E, 304CCR, 305CCR, 304CR, 305CR, 304.5, 305.5, 306E, 306304E STEEL TRACKS

(PER MACHINE QUANTITY PART NUMBERLink Assembly – 46 Section 1 396-6224Track Shoe 46 396-6233Bolt (M10 x 1.25 x 30 mm) 184 396-9400Washer 184 396-9401Rubber Track Pad Washer Offering and Mounting Hardware(Mounts to Rubber Pad)

46 397-2382

Bolt (M12 x 1.5 x 25 mm) 46 398-1441Washer 46 398-1442

304E SPROCKETS(PER SIDE) QUANTITY PART NUMBERSprocket (23 Tooth) 2 264-5371Bolt (M12 x 1.75 x 35 mm) 22 8T-4956Washer 22 8T-4223

304E IDLERS(PER MACHINE) QUANTITY PART NUMBERIdler and Bearing Assembly 2 267-4829Bushing 2 154-2333Seal - Duo-Cone 2 234-8984

304E ROLLERS(PER MACHINE) QUANTITY PART NUMBERRoller Gp 8 266-8793Carrier Roller 2 266-8794

304E GUIDING GUARDSFOR USE WITH STEEL TRACK

(PER MACHINE) QUANTITY PART NUMBERGuard Assembly - RH 1 399-9398Guard Assembly - LH 1 399-9397Bolt (M12 x 1.75 x 30 mm) 6 8T-4139Washer 6 8T-4223

305.5E, 305.5D, 305CCR SPROCKETS(PER SIDE) QUANTITY PART NUMBERSprocket (19 Tooth) 1 260-6341

Bolt (14 mm) 12 085-9768Washer 12 7X-0510

776

304D, 304E, 304CCR, 305CCR, 304CR, 305CR, 304.5, 305.5, 306E, 306306E, 306, 305E, 305D, 304CCR, 304CR, 305CR, 304.5, 305.5 SPROCKETS

(PER SIDE) QUANTITY PART NUMBERSprocket (19 Tooth) 1 158-4795

Bolt (14 mm) 9 085-9768Washer 9 7X-0510

305E, 305D, 305.5E, 305.5D, 304CCR, 305CCR IDLERS(PER MACHINE) QUANTITY PART NUMBERIdler Assembly 2 267-4813Shaft 2 267-4817Seal - Duo-Cone Group 4 267-4819Seal –Shaft O-Ring 4 095-1600

306, 305CR, 304.5, 305.5 IDLERS(PER MACHINE) QUANTITY PART NUMBERIdler Assembly 2 240-6304Components of Idler AssemblyBearing- Ball 2 095-0990Ring - Retaining 2 8T-0707Seal - Oil 2 120-4660

304CR IDLERS(PER MACHINE) QUANTITY PART NUMBERIdler Assembly 2 241-5972Components of Idler AssemblyShaft 1 241-5976Bearing- Ball 2 095-0990Ring - Retaining 2 8T-0707Seal - Oil 2 120-4660

305E, 305D, 305.5E, 305.5D, 304CCR, 305CCR CARRIER ROLLERS(PER MACHINE) QUANTITY PART NUMBERCarrier Roller Group (Includes Shaft) 2 265-7675


Bolt (16 mm) 1 8T-4173Washer 2 7X-0515Nut 2 8T-4132


777

304D, 304E, 304CCR, 305CCR, 304CR, 305CR, 304.5, 305.5, 306E, 306306, 304CR, 305CR, 304.5, 305.5 CARRIER ROLLER GROUP

CURRENT DESIGN(PER MACHINE) QUANTITY PART NUMBERGroup 2 277-8576Components of GroupRoller Shell Assembly 1 136-2394Bearing (6) 2 099-6461Shaft Assembly 1 277-8577Retainer 1 099-6462Cover 1 102-8079Bolt 5 6V-8202Seal – Duo-Cone Group 2 099-6463Seal – Shaft O-Ring 1 095-1541Plug 1 7H-3171Mounting Hardware (7)

Setscrew 1 095-1279

306 CARRIER ROLLERS(PER MACHINE) QUANTITY PART NUMBERCarrier Roller Assembly (Includes Shaft) 2 333-5602

304CR, 305CR, 304.5, 305.5 CARRIER ROLLERSFORMER DESIGN

(PER MACHINE) QUANTITY PART NUMBERCarrier Roller Assembly (Includes Shaft) 2 172-1764Mounting Hardware (8)

Bolt (16 mm) 1 7X-2556Washer 2 9X-8257Nut 2 8T-4132

305D, 305.5E, 305.5D, 304CCR, 305CCR ROLLERS(PER MACHINE) QUANTITY PART NUMBERRoller Group (Center Flange) (Includes Shaft) 10 265-7674


Bolt (16 mm) 2 8T-4140Washer 2 7X-0515

6 Component of preceding assembly or group; quantity shown is quantity per assembly or group.7 Not included in roller group; quantity shown is required to mount each roller.8 These components are not included in the roller assembly; quantities shown are required to mount each roller.9 These components are not included in the roller group; quantities shown are required to mount each roller.

778

304D, 304E, 304CCR, 305CCR, 304CR, 305CR, 304.5, 305.5, 306E, 306306, 304CR, 305CR, 304.5 ROLLERS

(PER MACHINE) QUANTITY PART NUMBERRoller Assembly (Center Flange) (Includes Shaft) - (10) 333-5606Components of AssemblyBushing 2 158-4714Seal Assembly 2 158-4712Seal - Shaft O-Ring 2 158-4713Ring - Retaining 2 234-8962Plug 1 3D-4603Mounting Hardware (11)

Bolt (10 mm) 4 8T-4182Washer 4 8T-4121

305E, 305D, 305.5E, 305.5D, 304CCR, 305CCR GUIDING GUARDSFOR USE WITH STEEL TRACK


304CR, 305CR, 305.5 GUIDING GUARDSFOR USE WITH STEEL TRACK


304.5 GUIDING GUARDSFOR USE WITH STEEL TRACK


10 8 Roller Groups on 304CR, 10 Roller Groups on 305CR, 304.5, and 306.11 These components are not included in the roller assembly; quantities shown are required to mount each roller.

779

304D, 304E, 304CCR, 305CCR, 304CR, 305CR, 304.5, 305.5, 306E, 306306E, 306 GUIDING GUARDS

FOR USE WITH STEEL TRACK(PER MACHINE) QUANTITY PART NUMBERGuard Assembly - RH 2 284-1651Guard Assembly - LH 2 284-1652Bolt (M12 x 1.75 x 30 mm) 12 8T-4139Washer 12 8T-4223

780

308E, 308D, 307D, 308C, 307C, 307B, 307308E, 308D, 308C TRACKJPS, HSA, GBT, FYC, KCX, GBJ

6.10" (154.0 mm) PITCH - 14 mm BOLT

QUANTITYUNSEALED

PART NUMBERGREASED

PART NUMBERLink Assembly – 40 Section 2 323-0955 323-0956Components of Link AssemblyTrack LinksRH Master Link 1 136-2405 136-2405LH Master Link 1 136-2407 136-2407RH Links 39 136-2404 136-2404LH Links 39 136-2410 136-2410Other ComponentsPin 39 168-6758 168-6758Master Pin 1 323-0959 323-0959Bushing 39 168-6755 (1) 168-6757 (1)

Master Bushing 1 168-6756 (1) 168-6756 (1)

Cotter 1 096-7033 096-7033Spacer 2 136-2409 –

Seal (Poly - W) 78 – 168-6759Seal Master (Poly - W) 2 – 168-6760Track Hardware (2)

Bolt 160 136-2401 136-2401Nut 160 136-2402 136-2402

307E, 307D, 307C, 307B TRACKBNE, BCM, BAJ, 4RW, 5CW, 6KZ, 7DZ, ECT, DSG, WZX, H1Y

6.10" (154.0 mm) PITCH - 14 mm BOLT

QUANTITYSEALED

PART NUMBER QUANTITYUNSEALED

PART NUMBERGREASED

PART NUMBERLink Assembly – 38 Section 2 145-2949 2 323-0957 323-0958


Track LinksRH Master Link 1 136-2405 1 136-2405 136-2405LH Master Link 1 136-2407 1 136-2407 136-2407RH Links 37 136-2404 37 136-2404 136-2404LH Links 37 136-2410 37 136-2410 136-2410Other Components

Pin 37 168-6758 37 168-6758 168-6758Master Pin 1 323-0959 1 323-0959 323-0959Bushing 37 145-2951 37 168-6755(1) 168-6757(1)

Master Bushing 1 168-6756(1) 1 168-6756(1) 168-6756(1)

Cotter 1 096-7033 1 096-7033 096-7033

Spacer 2 145-2952 2 136-2409 –

Seal (Poly - W) 152 145-2953 74 – 168-6759

Seal Master (Poly - W) – – 2 – 168-6760

1 Large O.D. bushing2 Not part of link assembly; required to assemble track group

781

308E, 308D, 307D, 308C, 307C, 307B, 307307E, 307D, 307C, 307B TRACKBNE, BCM, BAJ, 4RW, 5CW, 6KZ, 7DZ, ECT, DSG, WZX, H1Y6.10" (154.0 mm) PITCH - 14 mm BOLT(Cont'd.)

QUANTITYSEALED

PART NUMBER QUANTITYUNSEALED

PART NUMBERGREASED

PART NUMBERTrack Hardware(3)

Bolt 152 136-2401 152 136-2401 136-2401Nut 152 136-2402 152 136-2402 136-2402

307B GREASED TRACKAFB

5.31" (135.0 mm) PITCH – 1/2" BOLT

QUANTITY PART NUMBERLink Assembly – 42 Section 2 102-8077Components of Link AssemblyTrack LinksRH Master Link 1 3A-9617LH Master Link 1 3A-9616RH Links 41 3A-9615LH Links 41 3A-9614Other ComponentsPin 41 117-8882Master Pin 1 117-8883Bushing 41 172-3288Master Bushing 1 117-8881Cotter 1 096-7033Seal (Poly - W) 82 171-6767Seal - Master (Poly - W) 2 171-6766Track Hardware (3)

Bolt 168 3A-9605Nut 168 117-8885

308B, 307 TRACK42 SECTION: 2PM, 9ZL 44 SECTION 2FL, 3YS

5.31" (135.0 mm) PITCH – 1/2" BOLT

PART NUMBER STD 42 Section LGP 44 SectionLink Assembly (Quantity 2) 102-8077 123-1813Components of Link AssemblyTrack LinksRH Master 096-2142 1 1LH Master 096-2143 1 1RH Regular 093-1969 41 43LH Regular 093-1970 41 43Other Components

3 Not part of link assembly; required to assemble track group

782

308E, 308D, 307D, 308C, 307C, 307B, 307308B, 307 TRACK42 SECTION: 2PM, 9ZL 44 SECTION 2FL, 3YS5.31" (135.0 mm) PITCH – 1/2" BOLT(Cont'd.)

PART NUMBER STD 42 Section LGP 44 SectionPin 093-0515 41 43Master Pin 093-0517 1 1Bushing 102-8107 41 43Master Bushing 102-8108 1 1Spacer 093-0036 2 2Cotter Pin 096-7033 1 1Track Hardware (4)

Bolt 102-8072 168 176Nut 102-8073 168 176

307 TRACK2WM

5.31" (135.0 mm) PITCH – 1/2" BOLT

QUANTITYSEALED

PART NUMBERUNSEALED

PART NUMBERLink Assembly – 42 Section 2 102-8077 102-8077Components of Link AssemblyTrack LinksRH Master Link 1 3A-9617 3A-9617LH Master Link 1 3A-9616 3A-9616RH Links 41 3A-9615 3A-9615LH Links 41 3A-9614 3A-9614Other ComponentsPin 41 117-8882 117-8882Master Pin 1 117-8883 117-8883Bushing 41 171-7624 117-8880Master Bushing 1 117-8881 117-8881Cotter 1 096-7033 096-7033Spacer 2 117-8884 117-8884Washer 164 145-2953 –Track Hardware (5)

Bolt 168 3A-9605 3A-9605Nut 168 117-8885 117-8885

4 Not part of link assembly: required to assemble track group.5 Not part of link assembly; required to assemble track group

783

308E, 308D, 307D, 308C, 307C, 307B, 307308E/D/C, 307E/D/C/B TRACK SHOES

CRW, BNE, BCM, BAJ, 4RW, 5CW, 6KZ, 7DZ, JPS, HSA, GBT, FYC, ECT, DSG, WZX, H1Y6.10" (154.0 mm) PITCH – 14 mm BOLT

TYPE WIDTH PART NUMBERTriple Grouser (4 extra bolt holes on outer edge of shoe) (6) 17.7" (450 mm) 136-2400Triple Grouser 17.7" (450 mm) 145-2948Triple Grouser 23.6" (600 mm) 145-2950

308D/C TRACK RUBBER BELTS6.10" (154.0 mm) – 14 mm BOLT

(PER SIDE) WIDTH QUANTITY PART NUMBERShoe Assembly Segment Rubber Belt (40 Section) 17.7" (450 mm) 2 194-1150 (7)

308E TRACK RUBBERGBJ, TMX

(PER SIDE) WIDTH QUANTITY PART NUMBERPad Assembly 17.7" (450 mm) 4 170-4419 (8)

307D/C/B RUBBER TRACK6.10" (154.0 mm) PITCH – 14 mm BOLT

(PER SIDE) WIDTH QUANTITY PART NUMBERShoe Assembly Segment Rubber (38 Section) 17.7" (450 mm) 2 169-8088 (7)

307B, 307 TRACK SHOES2WM, AFB

5.31" (135.0 mm) PITCH – 1/2" BOLT

TYPE WIDTH PART NUMBERTriple Grouser 17.7" (450 mm) 113-4189Triple Grouser 21.7" (550 mm) 117-4855Triple Grouser 23.6" (600 mm) 115-5198

307 TRACK SHOES2PM

5.31" (135.0 mm) PITCH – 1/2" BOLT

TYPE WIDTH PART NUMBERTriple Grouser (4 extra bolt holes on outer edge of shoe) (9) 17.7" (450 mm) 102-8150Triple Grouser 17.7" (450 mm) 1R-9507Triple Grouser 23.6" (600 mm) 355-6790

6 Two options available: (1) (Bolts to shoe with 4 studs) Rubber Pad Assembly 170-4419, Nut 096-4876, Washer 159-6529. (2) (Bolts to shoewith 2 bolts and clips) Rubber Pad Assembly 216-8894, Bolt 130-9864, Washer 3B-4509.

7 2 required per side, use 093-0255 bolts and 136-2402 nuts to assemble to link assembly. To replace one rubber shoe order 169-8092.8 4 required per side, use 159-6529 washers and 159-6528 nuts to assemble to link assembly.9 Rubber Pad Assembly 124-7856, Washer 095-0817

784

308E, 308D, 307D, 308C, 307C, 307B, 307308B RUBBER TRACK

3YS5.31" (135.0 mm) PITCH

TYPE WIDTH PART NUMBERRubber Track (Natural Rubber & Synthetic Rubber) (10) 17.7" (450 mm) 139-8193

308E RUBBER TRACKGBJ, TMX

TYPE WIDTH PART NUMBERRubber Track 17.7" (450 mm) 391-3168

307 TRACKOPTIONAL RUBBER BELT5.31" (135.0 mm) PITCH

TYPE WIDTH PART NUMBERRubber Track (10) 17.7" (450 mm) 134-7697

308E, 308D, 307D, SPROCKETSJPS, HSA, GBT, FYC, ECT, DSG, WZX, H1Y, GBJ, HAM, HEL, JBE, JSN, TMX

6.10" (154.0 mm) PITCH

(PER SIDE) QUANTITY PART NUMBERSprocket (21 Teeth) 1 294-8262Bolt 15 285-6125

308C, 307C/B SPROCKETSCRW, BNE, BCM, BAJ, 4RW, 5CW, 6KZ, 7DZ, KCX

6.10" (154.0 mm) PITCH

(PER SIDE) QUANTITY PART NUMBERSprocket (21 Teeth) 1 130-9326Bolt 12 8C-3425

308B, 307B, 307 SPROCKETS2FL, 2PM, 2WM, 9ZL, AFB, 3YS

5.31"(135.0 mm) PITCH

(PER SIDE) QUANTITY PART NUMBERSprocket Rim (23 Teeth) 1 5I-9336Bolt 12 8C-3425

308E IDLERS(PER MACHINE) QUANTITY PART NUMBERIdler Group 2 294-5338Components of Group

10 2 Per machine

785

308E, 308D, 307D, 308C, 307C, 307B, 307308E IDLERS (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERIdler Assembly 1 294-5338Bearing (11) 2 294-5350Idler 1 294-4438Shaft 1 294-5348Bearing Block 2 294-4439Pin 2 095-0894Toric Ring (11) 2 099-0194Seal - O-Ring 2 6V-7660Plug 1 7H-3171

308D/C/B, 307D, 307E IDLERSCRW, JPS, HSA, GBT, FYC, ECT, DSG, 3YS, WZX, H1Y, KCX

6.10" (154.0 mm) PITCH

(PER MACHINE) QUANTITY PART NUMBERIdler Group 2 277-8667Components of GroupIdler Assembly and Bearing 1 277-8668Bearing (11) 2 5I-6274Shaft 1 185-9185Bearing Block 2 185-9159Pin 2 185-9160Seal – Duo-Cone™ Group 2 093-1414Toric Ring (11) 2 093-1364Seal – Shaft O-Ring 2 095-1600Plug 1 7H-3171

307C/B IDLERSBNE, BCM, BAJ, 4RW, 5CW, 6KZ, 7DZ

6.10" (154.0 mm) PITCH

(PER MACHINE) QUANTITY PART NUMBERIdler Group 2 277-8667Components of GroupIdler Assembly and Bearing 1 277-8668Bearing (11) 2 5I-6274Shaft 1 102-8082Bearing Block 2 102-8084Pin 2 3E-4370Seal – Duo-Cone Group 2 093-1414Toric Ring (11) 2 093-1364

11 Component of preceding assembly or group; quantity shown per assembly or group.

786

308E, 308D, 307D, 308C, 307C, 307B, 307307C/B IDLERSBNE, BCM, BAJ, 4RW, 5CW, 6KZ, 7DZ6.10" (154.0 mm) PITCH(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERSeal – Shaft O-Ring 2 095-1600Plug 1 7H-3171

307B IDLERSAFB

5.31" (135.0 mm) PITCH


Components of GroupIdler Assembly 1 277-8668Bearing (12) 2 5I-6274Shaft 1 102-8082Bearing Block 2 102-8084Pin 2 3E-4370Seal – Duo-Cone Group 2 093-1414Toric Ring (12) 2 093-1364Seal – Shaft O-Ring 2 095-1600Plug 1 7H-3171

307 IDLERS5.31" (135.0 mm) PITCH

(PER MACHINE) QUANTITY FORMER PART NUMBER PART NUMBERIdler Group 2 277-8667 115-6336Components of GroupIdler Assembly 1 277-8668 277-8668Bearing (12) 2 5I-6274 5I-6274Shaft 1 102-8082 102-8082Bearing Block 2 102-8084 102-8084Pin 2 3E-4370 3E-4370Seal – Duo-Cone Group 2 093-1414 093-1414Toric Ring (12) 2 093-1364 093-1364Seal – Shaft O-Ring 2 095-1600 095-1600Plug 1 7H-3171 7H-3171

12 Component of preceding assembly or group; quantity shown per assembly or group.

787

308E, 308D, 307D, 308C, 307C, 307B, 307308D/C/B, 307E/D/C/B, 307 CARRIER ROLLERS


Components of GroupRoller Shell Assembly 1 136-2394Bearing (13) 2 099-6461Shaft Assembly 1 277-8577Retainer 1 099-6462Cover 1 102-8079Bolt 5 6V-8202Seal – Duo-Cone Group 2 099-6463Seal – Shaft O-Ring 1 095-1541Plug 1 7H-3171Mounting Hardware (14)

Setscrew 1 095-1279

308E CARRIER ROLLERS(PER MACHINE) QUANTITY PART NUMBERGroup 2 383-6965Components of GroupRoller and Bearing Assembly 1 383-6956Bearing Assembly 1 383-6957Shaft Assembly 1 383-6959Retainer 1 383-6953Cover 1 383-6955Bolt 2 6V-8202Seal - Gp - Metal Face 1 383-6954Plug 1 383-6952

308D/C/B, 307D/C/B TRACK ROLLERSSTEEL TRACK*

(PER MACHINE) QUANTITY PART NUMBERRoller Gp - Single Flange (SF) 10 383-6936Components of GroupRoller Assembly 1 383-6938Bearing (15) 2 5I-6274Shaft 1 383-6942End Collar 1 383-6943End Collar 1 383-6944

13 Component of preceding assembly or group.14 Not included in roller group; quantity shown is required to mount each roller.15 Component of proceeding assembly or group; quantity shown is quantity per assembly or group.

788

308E, 308D, 307D, 308C, 307C, 307B, 307308D/C/B, 307D/C/B TRACK ROLLERSSTEEL TRACK*(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERDowel 2 102-8116Seal – Group 2 136-0296Toric Ring (16) 2 136-0297Plug - Pipe 1 383-6937Seal - O Ring 2 095-1659Mounting Hardware (17)

Bolt 4 6V-8336Washer 4 5P-8245* For GBJ, TMX Rubber Track Assembly - Roller Gp Center Flange 383-6949 which includes all Steel Track Assembly with exception of Roller Gp 383-6951.

308D/C/B, 307E/D/C/B TRACK ROLLERSCRW, BNE, BCM, BAJ, 4RW, 5CW, 6KZ, 7DZ, JPS, HSA, GBT, FYC, ECT, DSG, 3YS, WZX, H1Y, KCX

(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) 10 (18) 127-3806Components of GroupRoller Shell (SF) 1 6I-6525Bearing (16) 2 5I-6274Shaft 1 102-8115End Collar 1 424-4194End Collar 1 424-4197Dowel 2 102-8116Pin 1 159-0049Seal – Group 2 136-0296Toric Ring (16) 2 136-0297Plug - Pipe 1 3D-4603Mounting Hardware (19)

Bolt 4 6V-8336Washer 4 5P-8245

307B, 307 TRACK ROLLERS*2FL, 2PM, 2WM, 9ZL, AFB


Center Flange (CF) 4 127-3807

Components of Group

16 Component of proceeding assembly or group; quantity shown is quantity per assembly or group.17 These components are not included in the roller group; quantities shown are required to mount each idler18 12 Rollers required for the 308B (3YS).19 These components are not included in the roller group; quantities shown are required to mount each roller.

789

308E, 308D, 307D, 308C, 307C, 307B, 307307B, 307 TRACK ROLLERS*2FL, 2PM, 2WM, 9ZL, AFB(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERRoller Shell (SF) 1 6I-6525Roller Shell (CF) 1 6I-6528Bearing (20) 2 5I-6274Shaft 1 102-8115End Collar 1 424-4197End Collar 1 424-4194Pin 2 102-8116Seal – Duo-Cone Group 2 136-0296Toric Ring (20) 2 136-0297Seal – Shaft O-Ring 2 095-1659Plug 1 3D-4603Mounting Hardware (21)

Bolt 4 8T-4648Washer 4 8T-4223* Machine roller sequence (measured from front of machine): SF, SF, CF, SF, CF, SF.

308E/D/C, 307D, CENTER GUIDING GUARDS(PER MACHINE) QUANTITY PART NUMBERGuard Assembly 2 276-0979Bolt (M12) 8 8T-4192Washer 8 8T-4223


791

Multi-Terrain Loaders, Compact Track Loaders257D, 257B3, 247B3, 257B2, 247B2, 257B, 247B, 257, 247.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 792277D, 277C2, 277C, 287D, 287C2, 287C, 297C.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 797277B, 267B, 277, 267... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 802287B, 287 ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 807259D, 259B3 ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 811279D, 279C2, 279C, 289C2, 289D, 289C, 299D, 299C .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 813

792

257D, 257B3, 247B3, 257B2, 247B2, 257B, 247B, 257, 247257D, 257B3, 247B3, 257B2, 247B2, 257B, 247B, 257, 247 RUBBER TRACKS

SLK, MTL, CMM, CML, ESL, KB3, TSL, EML, EZW, FMR

(PER MACHINE) QUANTITY WIDTH PART NUMBERTrack- Rubber 2 15.0" (380 mm) 325-8624Track - Rubber (Smooth) 2 15.0" (380 mm) 278-1215Track - Rubber – General Duty 2 15.0" (380 mm) 420-9876

257D SPROCKET ASSEMBLYEML, EZW, FMR

(PER SIDE) QUANTITY PART NUMBERComponents of GroupSprocket 1 389-7577Ring 1 258-3087Sleeve - Outer 12 342-5015Sleeve - Inner 12 342-5014Bolt (1/2 - 13 x 7.5 in) 12 280-5091Washer 12 7X-3392Locket 12 1K-6872

257B3, 247B3, 257B2, 247B2 SPROCKET ASSEMBLYMTL5075-UP, SLK7300-UP, TNK, B7H, ESL, KB3, TSL

(PER SIDE) QUANTITY PART NUMBERSprocket 1 305-9285Ring 1 258-3087Sleeve - Outer 12 342-5015Sleeve - Inner (hardened) 12 342-5014Bolt (1/2") 12 280-5091Washer 12 7X-3392Locknut 12 1K-6872

257B3, 247B3, 257B, 247B, 257, 247 SPROCKET ASSEMBLYMTL1-5074, SLK1-7299, CMM, CML

(PER SIDE) QUANTITY PART NUMBERSprocket 1 234-0742Ring 1 210-4647 (1)

Sleeve - Outer 12 342-5015Sleeve - Inner (hardened) 12 342-5014Bolt (1/2") 12 1A-0168Locknut 12 9X-0941

1 Service replace by: (1)- 258-3087 Ring, (12)- 8T-4223 Bolts, (12)- 280-5091 Lock Nuts, (12)- 1K-6872 Washers

793

257D, 257B3, 247B3, 257B2, 247B2, 257B, 247B, 257, 247257D, 257B3, 247B3, 257B2, 247B2 WHEEL GP - IDLER (FRONT)

MTL5075-UP, SLK7300-UP, TNK, B7H, ESL, KB3, EML, EZW, FMR

(PER MACHINE) QUANTITY PART NUMBERWheel Gp - Idler (Front) 4 389-7587

Components of GroupAxle Group- Idler 1 389-7588Sleeve 1 280-5025Cup 2 3N-6411Cone 2 3N-6412Seal Group 1 389-7561Housing 1 280-5026Seal 1 280-5112Plug 1 9F-2247Wheel 1 278-1301Bolt (1/2") 8 341-0742Washer 8 8T-7971Mounting Hardware (2)

Axle - Wheel 1 295-3295Seal -O- Ring 2 280-5038Washer 2 280-5074Locknut 2 280-5075Cap 2 295-3292Retaining Ring 2 2R-1236

257D, 257B3, 247B3, 257B2, 247B2 WHEEL GP - IDLER (REAR)MTL5075-UP, SLK7300-UP, TNK, B7H, ESL, KB3, TSL, EML, EZW, FMR

(PER MACHINE) QUANTITY PART NUMBERWheel Gp - Idler (Rear) 4 295-3230 (3)

Components of GroupAxle Group- Bogie 1 389-7586Sleeve 1 280-5025Cup 2 3N-6411Cone 2 3N-6412Seal Group 1 389-7561Housing 1 280-5026Seal 1 280-5112Plug 1 9F-2247Wheel 1 305-9270Bolt (1/2") 8 341-0742Washer 8 8T-7971Mounting Hardware (2)

2 These components are not included in the idler group; quantities shown are required to mount each idler.3 Not serviced, serviced as separate parts.

794

257D, 257B3, 247B3, 257B2, 247B2, 257B, 247B, 257, 247257D, 257B3, 247B3, 257B2, 247B2 WHEEL GP - IDLER (REAR)MTL5075-UP, SLK7300-UP, TNK, B7H, ESL, KB3, TSL, EML, EZW, FMR(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERWheel Gp - Idler (Rear) 4 295-3230 (3)


257B, 247B, 257, 247 WHEEL GP - IDLERMTL1-5074, SLK1-7299, CMM, CML

(PER MACHINE) QUANTITY PART NUMBERWheel Gp - Idler 4 223-8396

Components of GroupWheel Assembly- Idler 1 223-8397Cup 2 7T-9755Seal Group 1 367-8137Seal 1 212-6681Seal Retainer 1 219-4302Seal -O-Ring 1 3P-0815Retaining Ring 1 6V-1366Retaining Ring 1 216-6148Washer 1 357-0284Mounting Hardware (4)

Spacer 1 224-9409Cone 1 7T-9754Washer 1 216-6149Locknut 1 212-6559Cap 1 215-4006Retaining Ring 1 216-6148

257D, 257B3, 247B3, 257B2, 247B2 WHEEL GP - BOGIEMTL5075-UP, SLK7300-UP, ESL, KB3, TSL, EML, EZW, FMR

(PER MACHINE) QUANTITY PART NUMBERWheel Gp - Bogie 16 389-7585

Components of GroupAxle Group- Bogie 1 389-7586

3 Not serviced, serviced as separate parts.4 These components are not included in the idler group; quantities shown are required to mount each idler.

795

257D, 257B3, 247B3, 257B2, 247B2, 257B, 247B, 257, 247257D, 257B3, 247B3, 257B2, 247B2 WHEEL GP - BOGIEMTL5075-UP, SLK7300-UP, ESL, KB3, TSL, EML, EZW, FMR(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERWheel Gp - Bogie 16 389-7585

Sleeve 1 280-5025Cup 2 3N-6411Cone 2 3N-6412Seal Group 1 389-7561Housing 1 280-5026Seal 1 280-5112Plug 1 9F-2247Wheel 1 278-1261Bolt (1/2") 8 8C-4436Washer 8 8T-7971Mounting Hardware (5)


257B, 247B, 257, 247 WHEEL GP - BOGIE MIDDLEMTL1-5074, SLK1-7299, CMM, CML

(PER MACHINE) QUANTITY PART NUMBERWheel Gp - Bogie Middle 16 212-6628Components of GroupWheel Assembly- Bogie Middle 1 206-3812Cup 2 3P-8680Cone 1 3P-8681Seal 1 212-6681Spacer 1 215-3956Retaining Ring 1 006-8663Mounting Hardware (6)

Spacer 1 224-9407Cone 1 3P-8681Washer 1 216-6149Locknut 1 212-6559Cap 1 212-6682Retaining Ring 1 2D-0592

5 These components are not included in the bogie group; quantities shown are required to mount each bogie.6 These components are not included in the idler group; quantities shown are required to mount each idler.

796

257D, 257B3, 247B3, 257B2, 247B2, 257B, 247B, 257, 247257B, 247B, 257, 247 WHEEL PG - BOGIE END

MTL1-5074, SLK1-7299, CMM, CML

(PER MACHINE) QUANTITY PART NUMBERWheel Gp - Bogie End 4 223-8398

Components of GroupWheel Assembly- Bogie End 1 223-8399Cup 2 7T-9755Cone 1 7T-9754Seal Group 1 219-4302Seal 1 212-6681Seal Retainer 1 219-4302Seal -O-Ring 1 3P-0815Retaining Ring 1 6V-1366Retaining Ring 1 216-6148Mounting Hardware (7)

Spacer 1 224-9409Cone 1 7T-9754Washer 1 216-6149Locknut 1 212-6559Cap 1 215-4006Retaining Ring 1 216-6148

257B, 247B, 257, 247 "B2 SERIES" UPGRADE KITSKITS INCLUDE LEFT AND RIGHT B2 UNDERCARRIAGE FRAME ASSEMBLIES

MTL1-5074, SLK1-7299, CMM, CML

(PER MACHINE) QUANTITY PART NUMBERKit Option 1 (8) 1 305-9261Kit Option 2 (9) 1 305-9262Kit Option 3 (10) 1 352-1130

7 These components are not included in the idler group; quantities shown are required to mount each idler.8 Includes entire undercarriage set, rubber track, the planetary gear reduction motor (this eliminates the outboard bearing) and all hard-

ware. For installation/assembly instructions, refer to Special Instructions Media No. REHS4021.9 Includes kit 1 minus the tracks, sprocket, drive motor, and drive table. Option 2 is for the lower hour machines where the drive motor is

still in good working condition. Refer to Special Instruction Media No. REHS402310 Consists of a 305-9262 kit plus a pair of belts. (A complete UC for both sides with everything except new drive motors.)

797

277D, 277C2, 277C, 287D, 287C2, 287C, 297C277D, 277C2, 277C, 287D, 287C2, 287C, 297C TRACKS

TLK, STK, HMT, SSB, NTL, MLT, FMT, MET, KCC, JWF, MAS, GCP

(PER MACHINE) QUANTITY WIDTH PART NUMBERTrack - Rubber 2 18.0" (460 mm) 325-8625Rubber Track - General Duty 2 18.0" (460 mm) 420-9877

277D, 277C2, 277C, 287D, 287C2, 287C, 297C SPROCKET ASSEMBLY(PER SIDE) QUANTITY PART NUMBERSprocket 1 258-3085Ring - Outer 1 258-3086Ring - Middle 1 258-3084Ring - Inner 1 258-3087Sleeve - Outer (1) 36 258-3089Sleeve - Inner (2) 36 258-3088Bolt (1/2") 12 258-3122Washer 12 8T-4223Locknut 12 1K-6872

287D, 277D WHEEL GP - BOGIEDual Level Suspension

TLK, STK, HMT, FMT, MLT, NTL

(PER MACHINE) QUANTITY PART NUMBERComponents of Suspension Group (Dual Level)Gp - Bogie 16 372-5769Bogie Wheel 32 372-5766Shaft 16 372-5778Key 32 372-5783Ball Bearing 32 8H-9789Seal GP 32 372-5777Bolt 32 372-5779Spacer (Between Bogie Group and Frame) 4 258-3016Rubber Cord 16 258-3047Cover Plate 4 258-3017Bolt 8 4L-9337Washer 8 8T-4896Scraper 4 258-3116Bolt 8 1B-2706Nut 8 235-1088

1 Optional replacement 342-5017 (through hardened)2 Optional replacement 342-5016 (through hardened)

798

277D, 277C2, 277C, 287D, 287C2, 287C, 297C277D & 287D WHEEL GP - IDLER (FRONT & REAR)

TLK, STK, HMT, FMT, MLT, NTL

(PER MACHINE) QUANTITY PART NUMBERWheel Gp - Idler 8 372-5755Components of GroupAxle Group - Idler 1 372-5766Sleeve 1 258-3025Seal 1 258-3112Cone 2 2F-8509Cup 2 002-1212Housing 1 258-3026Seal Gp 1 372-5777Plug 1 9F-2247Idler Wheel -Inner, Steel (3) 1 258-3053Idler Wheel - Outer, Steel (4) 1 258-3052Bolt (1/2") Wheels to Axle 12 341-0742Washer 12 8T-7971Mounting Hardware, Front Idler Wheel Groups to Track Roll-er Frame (5)

Wheel Axle Assembly 1 309-3295Seal-O-Ring 2 5K-0227Washer 1 068-6405Locknut 1 258-3075Cap 2 258-3092Retainer Ring 2 6V-5590Mounting Hardware, Rear Idler Wheel Groups to Track RollerFrame (5)

Idler Axle (Rear) 1 258-3064Seal-O-Ring 2 5K-0227Washer 2 068-6405Locknut 2 258-3075Cap 2 258-3092Retainer Ring 2 6V-5590

277C2, 277C, 287C2, 287C, 297C WHEEL GP - IDLER (Front & Rear)(PER MACHINE) QUANTITY PART NUMBERWheel Gp - Idler 8 327-7727

Components of GroupAxle Group - Idler 1 327-7724Sleeve 1 258-3025

3 Optional Service Replacement 309-3296 - Rubber Inner Idler.4 Optional Service Replacement 309-3297 - Rubber Outer Idler.5 These components are not included in the idler wheel group; quantities shown are required to mount each idler wheel.

799

277D, 277C2, 277C, 287D, 287C2, 287C, 297C277C2, 277C, 287C2, 287C, 297C WHEEL GP - IDLER (Front & Rear) (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERWheel Gp - Idler 8 327-7727

Seal 1 258-3112Cone 2 2F-8509Cup 2 002-1212Housing 1 258-3026Seal Gp 1 258-3035Plug 1 9F-2247Idler Wheel -Inner (6) 1 309-3296Idler Wheel - Outer (7) 1 309-3297Bolt (1/2") Wheels to Axle 12 341-0742Washer 12 8T-7971Mounting Hardware, Front Idler Wheel Groups to Track Roll-er Frame (8)

Wheel Axle Assembly 1 309-3295Seal-O-Ring 2 5K-0227Washer 1 068-6405Locknut 1 258-3075Cap 2 258-3092Retainer Ring 2 6V-5590Mounting Hardware, Rear Idler Wheel Groups to Track RollerFrame (8)

Idler Axle (Rear) 1 258-3064Seal-O-Ring 2 5K-0227Washer 2 068-6405Locknut 2 258-3075Cap 2 258-3092Retainer Ring 2 6V-5590

277C, 287C, 297C WHEEL GP - BOGIESingle Level Suspension

(PER MACHINE) QUANTITY PART NUMBERWheel Gp - Bogie 10 258-3020

Components of GroupAxle Group - Bogie 1 258-3021Sleeve 1 258-3025Seal 1 258-3112Cone 2 2F-8509Cup 2 002-1212

6 Optional Service Replacement 258-3053 - Steel Inner Idlers for use in aggregates or gravel.7 Optional Service Replacement 258-3052 - Steel Outer Idlers for use in aggregates or gravel.8 These components are not included in the idler wheel group; quantities shown are required to mount each idler wheel.

800

277D, 277C2, 277C, 287D, 287C2, 287C, 297C277C, 287C, 297C WHEEL GP - BOGIESingle Level Suspension(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERWheel Gp - Bogie 10 258-3020Housing 1 258-3026Seal Gp 1 258-3035Plug 1 9F-2247Bogie Wheel -Inner 1 309-3298Bogie Wheel - Outer 1 309-3299Bolt (3/8") Wheels to Axle 12 258-3028Washer 12 8T-4896Mounting Hardware, Bogie Wheel Group to Track RollerFrame (9)

Wheel Axle Assembly 1 258-3065Seal-O-Ring 2 5K-0227Washer 1 258-3074Locknut 1 258-3075Cap 2 258-3092Ring Retainer 2 6V-5590Scrapers and Hardware to Bolt to Track Roller FrameScraper Assembly (positioned between bogie wheels 2 & 3and 4 & 5)

2 258-3118

Bolt (3/8") 2 258-3103Nut 2 235-1088Scraper (Long) (positioned between front idler wheel and firstbogie wheel) (10)

2 258-3116

Scraper (Short) (positioned between front idler wheel and firstbogie wheel)

2 258-3117

Bolt (3/8") 4 228-8403Nut 4 235-1088Scraper (Rear) (11) 2 320-8532Bolt 4 5P-2566Washer 4 8T-4223

277C2, 277C, 287C2, 287C, 297C WHEEL GP - BOGIEDual Level Suspension

(PER MACHINE) QUANTITY PART NUMBERComponents of Suspension Group (Dual Level)Gp - Bogie 16 320-8514Bolt (1/2") 96 8T-2502

9 These components are not included in the bogie wheel group; quantities shown are required to mount each bogie wheel.10 Optional Service replacement Heavy Duty Scraper 347-7727. Refer to SEPD1052.11 Optional Service replacement Heavy Duty Scraper 347-7724. Uses the same 5P-2566 and 8T-4223 Mounting Hardware as the 320-8532.

801

277D, 277C2, 277C, 287D, 287C2, 287C, 297C277C2, 277C, 287C2, 287C, 297C WHEEL GP - BOGIEDual Level Suspension(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERWasher 96 8T-4896Bogie Wheel 32 309-3298Spacer (Between Bogie Group and Frame) 4 258-3016Rubber Cord 16 258-3047Cover Plate 4 258-3017Bolt (3/8") (Bogie Group to Frame) 8 4L-9337Washer 8 8T-4896Scraper (Front Idler) 2 258-3116 (12)

Bolt (3/8") Scraper to Frame 4 1B-2706Nut 4 235-1088Scraper (Rear Idler) 2 320-8532 (13)

Bolt - Scraper to Framer 2 5P-2566Washer 2 8T-4223

12 Optional Service Replacement Heavy Duty Front Scraper 347-7727. Refer to SEPD1052.13 Optional Service Replacement Heavy Duty Rear Scraper 347-7724. Use with same 5P-2566 & 8T-4223 Mounting Hardware as with 320-

8532.

802

277B, 267B, 277, 267277B, 267B, 277, 267 BELTS

MDH, CYC, CNC, CMP

(PER MACHINE) QUANTITY WIDTH PART NUMBERRubber Track 2 18.0" (460 mm) 238-7664Rubber Track (Outside Guide Lugs) 2 20.0" (508 mm) 278-1219Rubber Track – General Duty 2 18.0" (460 mm) 420-9878

277B, 267B, 277, 267 SPROCKET ASSEMBLY(PER SIDE) QUANTITY PART NUMBERSprocket 1 261-6151Ring 2 200-0996Sleeve - Outer 24 199-5333 (1)

Sleeve - Inner 24 199-5332 (2)

Bolt (1/2") 12 8S-6212Locknut 12 1K-6872

277B, 267B, 277, 267 "SERIES 2" SPROCKET BEARING GROUP(PER MACHINE) QUANTITY PART NUMBERBearing Group - Sprocket 2 278-1240

Components of GroupFlange Group 1 278-1264Seal 1 278-1265Retainer 1 278-1266Bearing - Ball 1 4B-3665Ring - Retaining 1 8J-7636

277B, 267B, 277, 267 "SERIES 2" WHEEL GP - BOGIE(PER MACHINE) QUANTITY PART NUMBERWheel Gp - Bogie 12 261-6296Components of GroupAxle Group - Bogie 1 261-6297Seal Group 2 278-1311Outer Sleeve 2 278-1310Plug 1 108-2187Bogie Wheel (Middle) 1 238-7729

Bogie Wheel - (Outer) 2 238-7728Plate 2 261-6112Bolt (3/8") 24 228-8403Lockwasher 24 113-0693

1 Optional Service Replacement 342-5013 (Through Hardened.)2 Optional Service Replacement 342-5012 (Through Hardened.)

803

277B, 267B, 277, 267277B, 267B, 277, 267 "SERIES 2" WHEEL GP - BOGIE (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERWheel Gp - Bogie 12 261-6296Locknut 24 2K-4973Mounting Hardware, Wheel Group to Pivot Assembly (Carriage Assembly) (3)

Pivot Assembly (Mounts 2 Wheel Groups) 1 199-5370Plate 2 204-1371Bolt (3/8") 4 4L-6454Lockwasher 4 113-0693Mounting Hardware Carriage Assemblies to Frame Assembly (4)

Bolt (1/2") Rear 4 241-1855Bolt (1/2") Middle and Front 8 8T-8919Lockwasher 12 3B-4508Locknut 12 9X-0941

277B, 267B, 277, 267 WHEEL GP - BOGIE(PER MACHINE) QUANTITY PART NUMBERWheel Gp - Bogie 12 261-6104

Components of GroupAxle Group - Bogie 1 261-6105Tube Assembly - Bogie 1 199-5432Axle Shaft - Bogie 1 204-1375Bearing 2 8H-9789Seal 2 199-9928Plug 1 108-2187Bogie Wheel 2 199-5428Bogie Wheel - Center 1 199-5429Plate 2 200-0809Bolt (3/8") Outer Bogey Wheels 16 1B-2706Bolt (3/8") Center Bogey Wheel 8 228-8403Lockwasher 24 113-0693Locknut 24 3K-6060Mounting Hardware, Wheel Group to Pivot Assembly (Carriage Assembly) (3)

Pivot Assembly (Mounts 2 Wheel Groups) 1 199-5370Plate 2 204-1371Bolt (3/8") 4 4L-6454Lockwasher 4 113-0693Mounting Hardware Carriage Assemblies to Frame Assembly (4)

Bolt (1/2") Rear 4 1A-1460Bolt (1/2") Middle and Front 8 8T-8919

3 These components are not included in the bogie wheel group; quantities shown are required to mount each bogie.4 These components are not included in bogie wheel group; quantities shown are required to mount 3 carriage assemblies.

804

277B, 267B, 277, 267277B, 267B, 277, 267 WHEEL GP - BOGIE (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERWheel Gp - Bogie 12 261-6104Lockwasher 12 3B-4508Locknut 12 9X-0941

277B, 267B, 277, 267 "SERIES 2" WHEEL GP - IDLER (Front & Rear)(PER MACHINE) QUANTITY PART NUMBERWheel Gp - Idler (Front & Rear) 4 261-6300

Components of GroupAxle Group - Idler 1 261-6301Outer Sleeve 2 278-1310Seal Group 2 278-1311Plug 1 108-2187Idler Wheel (Middle) 1 230-3733 (5)

Idler Wheel - (Outer) 2 230-3732 (6)

Plate 2 278-1312Bolt (1/2") 24 223-8372Lockwasher 24 3B-4508Locknut 24 1K-6872Mounting Hardware (7)

Plate 2 204-1371Bolt (3/8") 4 4L-6454Lockwasher 4 113-0693

277B, 267B, 277, 267 WHEEL GP - IDLER (Front & Rear)(PER MACHINE) QUANTITY PART NUMBERWheel Gp - Idler (Front & Rear) 4 261-6300

Components of GroupAxle Group - Idler 1 261-6301 (8)

Idler Wheel 2 230-3732 (9)

Idler Wheel - Center 1 230-3733 (5)

Cap Assembly 2 230-3772Bolt (1/2") 24 223-8372Washer 24 8T-4223Locknut 24 1K-6872Mounting Hardware (7)

Plate 2 204-1371

5 For optional steel idler wheel order 2 Idler Wheel 305-9260, (the 305-9260 is a 1/2 wheel).6 For optional steel idler wheel order Idler Wheel 305-9259.7 These components are not included in the idler group; quantities shown are required to mount each idler.8 Serviced replaced by 1- 261-6301 and 2 - 278-1312.9 For optional steel idler wheel order 2 Idler Wheel 305-9259.

805

277B, 267B, 277, 267277B, 267B, 277, 267 WHEEL GP - IDLER (Front & Rear) (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERWheel Gp - Idler (Front & Rear) 4 261-6300

Bolt (3/8") 4 4L-6454Lockwasher 4 113-0693

277B, 267B, 277, 267 "SERIES 2" WHEEL GP - TENSIONER ASSEMBLY(PER MACHINE) QUANTITY PART NUMBERWheel Gp - Bogie 2 261-6296

Components of GroupAxle Group - Bogie 1 261-6297Seal Group 2 278-1311Outer Sleeve 2 278-1310Plug 1 108-2187Bogie Wheel (Middle) 1 238-7729

Bogie Wheel - (Outer) 2 238-7728Plate 2 261-6112Bolt (3/8") 24 228-8403Lockwasher 24 113-0693Locknut 24 2K-4973Mounting Hardware, Wheel Group to Plate Assembly (10)

Plate 2 204-1371Bolt (3/8") 4 4L-6454Lockwasher 4 113-0693Mounting Hardware Tensioner Assemblies to Frame Assembly (11)

Bolt (1/2") 2 5P-2566Lockwasher 2 3B-4508Locknut 2 9X-0941

277B, 267B, 277, 267 WHEEL GP - TENSIONER ASSEMBLY(PER MACHINE) QUANTITY PART NUMBERWheel Gp - Bogie 2 261-6104

Components of GroupAxle Group - Bogie 1 261-6105Tube Assembly - Bogie 1 199-5432Axle Shaft - Bogie 1 204-1375Bearing 2 8H-9789Seal 2 199-9928Plug 1 108-2187Bogie Wheel 2 199-5428

10 These components are not included in the bogie wheel group; quantities shown are required to mount each bogie.11 These components are not included in bogie wheel group; quantities shown are required to mount each tensioner assemblies.

806

277B, 267B, 277, 267277B, 267B, 277, 267 WHEEL GP - TENSIONER ASSEMBLY (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERWheel Gp - Bogie 2 261-6104

Bogie Wheel - Center 1 199-5429Plate 2 200-0809Bolt (3/8") Outer Bogey Wheels 16 1B-2706Bolt (3/8") Center Bogey Wheel 8 228-8403Lockwasher 24 113-0693Locknut 24 3K-6060Mounting Hardware, Wheel Group to Plate Assembly (12)

Plate 2 204-1371Bolt (3/8") 4 4L-6454Lockwasher 4 113-0693Mounting Hardware Tensioner Assemblies to Frame Assembly (13)

Bolt (1/2") 2 5P-2566Lockwasher 2 3B-4508Locknut 2 9X-0941

277B, 267B, 277, 267 "SERIES 2" UPGRADE KITS(PER MACHINE) QUANTITY PART NUMBERKit Option 1 (14) 1 305-9254Kit Option 2 (15) 1 305-9253

12 These components are not included in the bogie wheel group; quantities shown are required to mount each bogie.13 These components are not included in bogie wheel group; quantities shown are required to mount each tensioner assemblies.14 Includes Rubber Track, Idler & Wheel Groups, Sprocket Bearing Group, Sprocket Sleeves (inner and outer) and hardware. For installa-

tion/assembly instructions, refer to Special Instructions Media No. REHS4010.15 Includes Bogie & Wheel Groups. Refer to Special Instruction Media No. REHS4009.

807

287B, 287287B, 287 TRACKS

ZSA, CNY

(PER MACHINE) QUANTITY WIDTH PART NUMBERRubber Track 2 18.0" (460 mm) 220-8161Rubber Track - General Duty 2 18.0" (460 mm) 420-9879

287B, 287 SPROCKET ASSEMBLY(PER SIDE) QUANTITY PART NUMBERSprocket 1 261-6150Ring 2 200-0996Sleeve - Outer 24 199-5333 (1)

Sleeve - Inner 24 199-5332 (2)

Bolt (1/2") 12 8S-6212Locknut 12 1K-6872

287B, 287 "SERIES 2" SPROCKET BEARING GROUP(PER MACHINE) QUANTITY PART NUMBERBearing Group - Sprocket 2 278-1240Components of GroupFlange Group 1 278-1264Seal 1 278-1265Retainer 1 278-1266Bearing - Ball 1 4B-3665Ring - Retaining 1 8J-7636

287B, 287 "SERIES 2" WHEEL GP- BOGIE(PER MACHINE) QUANTITY PART NUMBERWheel Gp - Bogie 10 261-6296

Components of GroupAxle Group - Bogie 1 261-6297Seal Group 1 278-1311Outer Sleeve 2 278-1310Retainer - Ring 2 2J-8172Plug 1 108-2187Bogie Wheel (Outer) 2 238-7728Bogie Wheel (Middle) 1 238-7729Plate 2 261-6112Bolt (3/8") 24 228-8403Lockwasher 24 113-0693

1 Optional Service Replacement 342-5013 (Through Hardened.)2 Optional Service Replacement 342-5012 (Through Hardened.)

808

287B, 287287B, 287 "SERIES 2" WHEEL GP- BOGIE (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERWheel Gp - Bogie 10 261-6296Locknut 24 2K-4973Mounting Hardware (3)


287B, 287 WHEEL GP- BOGIE(PER MACHINE) QUANTITY PART NUMBERWheel Gp - Bogie 10 261-6296Components of GroupAxle Group - Bogie 1 261-6297Tube Assembly - Bogie 1 222-5687Axle Shaft - Bogie 1 222-5686Bearing 4 8H-9789Retainer 2 210-4693Retainer - Ring 2 2J-8172Seal 2 199-9928Plug 1 108-2187Bogie Wheel 2 238-7728Bogie Wheel - Center 1 238-7729Plate 2 261-6111Plate 2 261-6112Bolt (3/8") 24 228-8403Lockwasher 24 113-0693Locknut 24 2K-4973Mounting Hardware (3)


287B, 287 "SERIES 2" WHEEL GP- IDLER (FRONT AND REAR)(PER MACHINE) QUANTITY PART NUMBERWheel Gp - Idler (Front & Rear) 4 261-6302

Components of GroupAxle Group - Idler 1 261-6303Seal Group 2 278-1311Outer Sleeve 2 278-1310Plug 1 108-2187

3 These components are not included in the bogie wheel group; quantities shown are required to mount each bogie wheel group.

809

287B, 287287B, 287 "SERIES 2" WHEEL GP- IDLER (FRONT AND REAR) (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERWheel Gp - Idler (Front & Rear) 4 261-6302

Idler Wheel (Outer) 2 230-3732 (4)

Idler Wheel (Middle) 1 230-3733 (5)

Plate - Idler 2 278-1312Bolt (1/2") 24 223-8372Lockwasher 24 3B-4508Locknut 24 1K-6872Mounting Hardware (6)

Bracket 2 238-7709Bolt (3/8") 8 4L-6454Lockwasher 8 113-0693

287B, 287 WHEEL GP- IDLER (FRONT AND REAR)(PER MACHINE) QUANTITY PART NUMBERWheel Gp - Idler (Front & Rear) 4 261-6302

Components of GroupAxle Group - Idler 1 261-6107 (7)

Tube Assembly - Idler 1 222-5683 (7)

Axle Shaft - Idler 1 222-5682 (7)

Cone 2 111-2414Cup 2 111-2415Retaining Ring 2 234-0743Seal 2 199-9928Plug 1 108-2187Idler Wheel 2 230-3732 (4)

Idler Wheel - Center 1 230-3733 (5)

Cap Assembly 2 222-5684Bolt (1/2") 24 223-8372Washer 24 8T-4223Locknut 24 1K-6872Mounting Hardware (6)

Bracket 2 238-7709Bolt (3/8") 8 4L-6454Lockwasher 8 113-0693

4 For optional steel idler wheel order Idler Wheel 305-9259.5 For optional steel idler wheel order 2 Idler Wheel 305-9260, (the 305-9260 is a 1/2 wheel).6 These components are not included in the idler group; quantities shown are required to mount each idler group.7 Serviced Replaced By: 1 - Idler Axle Group - 261-6303 & 2 - Idler Plate - 278-1312.

810

287B, 287287B, 287 "SERIES 2" UPGRADE KIT

(PER MACHINE) QUANTITY PART NUMBERKit Option 1 (8) 1 305-9256

8 Includes rubber track, bogie & wheel groups, idler & wheel groups, sprocket bearing group, sprocket sleeves (inner and outer) andhardware. For installation/assembly instructions, refer to Special Instructions Media No. REHS4011.

811

259D, 259B3259D, 259B3 RUBBER TRACKS

QUANTITY WIDTH PART NUMBERBelt - Rubber, Standard 2 12.6" (320 mm) 357-0232Belt - Rubber, Wide 2 15.7" (400 mm) 357-0244Belt - Rubber, Mud and Snow 2 12.6" (320 mm) 348-9641Belt - Rubber, General Duty 2 12.6" (320 mm) 372-5793

259D, 259B3 SPROCKETSQUANTITY PART NUMBER

Sprocket - Track 1 304-1870Bolt (16 mm) 12 8T-7338Washer 12 3E-4356

259D, 259B3 FRONT IDLERSQUANTITY PART NUMBER

Idler Group - Double Flange (1) 2 304-1878Components of GroupIdler Assembly 1 304-1880Bearing 2 304-1883Shaft 1 304-1886Collar - Seal 1 389-7620Collar - Seal 1 389-7621Seal Group - Duo-Cone™ 2 171-5882Ring - Toric 2 162-2166Seal - Shaft O-Ring 2 5P-8215Ring - Retainer 2 6V-3213Plug - Pipe 1 9F-2247Mounting Hardware (2)

Bolt (20 mm) 2 8T-6430Washer 2 8T-5439

259D, 259B3 REAR IDLERSQUANTITY PART NUMBER

Idler Group - Single Flange (1) 2 304-1894

Components of GroupIdler Assembly 1 304-1895Bearing 2 304-1883Shaft 1 304-1886Collar - Seal 1 389-7620

1 320 mm Belt uses single flange on both front and rear, 400 mm belt uses double flange front and single flange rear.2 Not included in idler group; quantity is required to mount each idler group.

812

259D, 259B3259D, 259B3 REAR IDLERS (Cont'd.)

QUANTITY PART NUMBERIdler Group - Single Flange (3) 2 304-1894

Collar - Seal 1 389-7621Seal Group - Duo Cone 2 171-5882Ring - Toric 2 162-2166Seal - Shaft O-Ring 2 5P-8215Ring - Retainer 2 6V-3213Plug - Pipe 1 9F-2247Mounting Hardware (3)

Bolt (20 mm) 2 8T-6430Washer 2 8T-5439

259D, 259B3 TRACK ROLLERSQUANTITY PART NUMBER

Roller Group (Triple Flange) 8 389-7624 (4)

Components of GroupRoller Assembly 1 389-7624Bearing 2 304-1882Shaft 1 389-7622Collar - Seal 1 389-7623Collar - Seal 1 389-7623Seal Group - Duo Cone 2 171-5883Ring - Toric 2 216-3442Seal - Shaft O-Ring 2 5M-2057Ring - Retainer 2 109-6488Plug - Pipe 1 9F-2247Mounting Hardware (3)

Bolt (20 mm) 2 8T-6430Washer 2 8T-5439

3 320 mm Belt uses single flange on both front and rear, 400 mm belt uses double flange front and single flange rear.3 Not included in idler group; quantity is required to mount each idler group.4 259D requires 6 Track Rollers per machine.

813

279D, 279C2, 279C, 289C2, 289D, 289C, 299D, 299C279C2/D, 289C2/D RUBBER TRACKS

KWB, GTL, PPT, RCX, RTD, A9Z, TAW, WCT

(PER MACHINE) QUANTITY WIDTH PART NUMBERRubber Track 2 17.7" (450 mm) 372-5791Rubber Track, Narrow 2 15.7" (400 mm) 372-5792Rubber Track, Special Mud & Snow Tread 2 17.7" (450 mm) 357-0233Rubber Track, General Duty 2 17.7" (450 mm) 372-5796

279C, 289C, 299C/D, RUBBER TRACKSMBT, JMP, JSP, GTC, HCL, JST, NLC

(PER MACHINE) QUANTITY WIDTH PART NUMBERRubber Track 2 17.7" (450 mm) 304-1909Rubber Track, Special Mud & Snow Tread 2 17.7" (450 mm) 343-4596Rubber Track, Narrow 2 15.7" (400 mm) 351-8495Rubber Track, General Duty 2 17.7" (450 mm) 372-5798

289C, 299C, 299D, STEEL TRACK KIT5.669” (140 mm) Pitch

(PER MACHINE) QUANTITY PART NUMBERKit Undercarriage – Steel Track 1 376-8077Components of GroupTrack Assembly 1 367-8221Link Assembly 1 367-8185Shoe 36 367-8228Bolt - Track (M14 x 1.25 x 74 mm) 4 375-9416Bolt - Track 140 375-9417Nut 140 375-9418Pin 36 367-8220Bushing 36 367-8223Spacer 72 367-8224Seal Gp - DuoCone 72 367-8225Link - RH 35 367-8226Link - LH 35 367-8227Link - Half (RH) 1 367-8229Link - Half (LH) 1 375-9413Link - Half (RH) 1 375-9414Link - Half (RH) 1 375-9415

814

279D, 279C2, 279C, 289C2, 289D, 289C, 299D, 299C279D, 279C2, 279C, 289D, 289C2, 289C, 299C SPROCKETS

(PER SIDE) QUANTITY PART NUMBERSprocket - Track 1 304-1916Bolt (16 mm) 12 8T-7338Washer 12 3E-4356

279D, 279C2, 279C, 289D, 289C2, 289C, 299D, 299C FRONT IDLERS(PER MACHINE) QUANTITY PART NUMBERIdler Group 2 304-1878 (1)

Components of GroupIdler Assembly 1 304-1880Bearing 2 304-1883Shaft 1 304-1886Collar - Seal 1 389-7620Collar - Seal 1 389-7621Seal Group - Duo Cone 2 171-5882Ring - Toric 2 162-2166Seal - Shaft O-Ring 2 5P-8215Ring - Retainer 2 6V-3213Plug - Pipe 1 9F-2247Mounting Hardware (2)

Bolt (20 mm) 2 8T-6430Washer 2 8T-5439

279D, 279C2, 279C, 289D, 289C2, 289C, 299D, 299C REAR IDLERS(PER MACHINE) QUANTITY PART NUMBERIdler Group 2 304-1894Components of GroupIdler Assembly 1 304-1895Bearing 2 304-1883Shaft 1 304-1886Collar - Seal 1 389-7620Collar - Seal 1 389-7621Seal Group - Duo Cone 2 171-5882Ring - Toric 2 162-2166Seal - Shaft O-Ring 2 5P-8215Ring - Retainer 2 6V-3213Plug - Pipe 1 9F-2247Mounting Hardware (2)

1 Optional Replacement 348-9647 Triple Flange Idler.2 Not included in idler group; quantity is required to mount each idler group.

815

279D, 279C2, 279C, 289C2, 289D, 289C, 299D, 299C279D, 279C2, 279C, 289D, 289C2, 289C, 299D, 299C REAR IDLERS (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERIdler Group 2 304-1894

Bolt (20 mm) 2 8T-6430Washer 2 8T-5439

279D, 279C2, 279C, 289D, 289C2, 289C, 299D, 299C TRACK ROLLERS(PER MACHINE) QUANTITY PART NUMBERRoller Group (Triple Flange) 10 389-7624

Components of GroupRoller Assembly 1 389-7624Bearing 2 304-1882Shaft 1 389-7622Collar - Seal 1 389-7623Collar - Seal 1 389-7623Seal Group - Duo Cone 2 171-5883Ring - Toric 2 216-3442Seal - Shaft O-Ring 2 5M-2057Ring - Retainer 2 109-6488Plug - Pipe 1 9F-2247Mounting Hardware (3)

Bolt (20 mm) 2 8T-6430Washer 2 8T-5439

3 Not included in idler group; quantity is required to mount each idler group.

817

Paving ProductsPM465 ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 818PM565B, PM565.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 820PR450, PR450C... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 824PR750B, PR750C, PR1000, PR1000C .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 826AP650B, BG225C .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 828AP1050B, BG245C... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 832AP1050. .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 836AP1055B BG2455C.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 840

818

PM465PM465 TRACK

5.31" (135.0 mm) PITCH – 1/2" BOLT

QUANTITY PART NUMBERLink Assembly – 30 Section 4 141-3245Track LinksRH Master 1 3A-9617LH Master 1 3A-9616RH Regular 29 3A-9615LH Regular 29 3A-9614Other ComponentsPin 29 117-8882Pin-Master 1 117-8883Bushing 29 117-8880Bushing-Master 1 117-8881Spacer 2 117-8884Cotter 1 096-7033Track Hardware (1)

Bolt 120 3A-9605Nut 120 117-8885

PM465 TRACK SHOES5.31" (135.0 mm) PITCH – 1/2" BOLT

TYPE WIDTHSEALED PARTNUMBER

Padded Shoe Assembly (Polyurethane) 10.00 in (254 mm) 236-8281

PM465 SPROCKETS(PER SIDE) QUANTITY PART NUMBERSprocket Rim (23 Tooth) 2 132-3546Bolt 36 8T-4193Washer 36 9X-8257

PM465 IDLERS(PER MACHINE) QUANTITY PART NUMBERIdler Group 4 6I-6488Other Components (Per Idler)Idler Assembly 1 6I-6489 (2)

Bearing (3) 2 5I-6274Shaft 1 102-8082Bearing 2 102-8084

1 Not part of link assembly; required to assemble track group.2 Service Replaced by 277-8668.3 Component of preceding assembly or group; quantity shown is quantity per assembly or group.

819

PM465PM465 IDLERS (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERPin-Spring 2 3E-4370Plug 1 7H-3171Seal – Duo-Cone™ Group 2 093-1414Toric Ring (4) 2 093-1364Seal – Shaft O-Ring 2 095-1600

PM465 TRACK ROLLERS

(PER MACHINE) QUANTITYFORMER PARTNUMBER

PARTNUMBER

Single Flange (SF) 20 127-3806 (5) 244-3099

Components of GroupRoller -Bearing 2 - 247-7647Roller Shell (SF) 1 6I-6525 -

Bearing (4) 2 5I-6274 -

Shaft 1 102-8115 -

End Collar 1 127-3804 -

End Collar 1 127-3805 -

Seal – Duo-Cone Group 2 136-0296 136-0296Toric Ring (4) 2 136-0297 -

Seal – Shaft O-Ring 2 095-1659 4J-0520Plug 1 3D-4603 -

Dowel 2 102-8116 096-6783Mounting Hardware (6)

Bolt 4 8T-4648 8T-4648Washer 4 8T-4223 8T-4223

4 Component of preceding assembly or group; quantity shown is quantity per assembly or group.5 Recommend upgrading to 244-3099 Roller Group, due to larger tread diameter should replace all roller groups at the same time.6 These components are not included in the roller group; quantities shown are required to mount each roller.

820

PM565B, PM565PM565B, PM565 TRACK6.75" (171.5 mm) PITCH – 5/8" BOLT

QUANTITYSEALED PARTNUMBER

Link Assembly – 26 Section 4 6Y-8795Track LinksRH Master 1 9K-0029LH Master 1 9K-0028RH Regular 25 9K-6629LH Regular 25 9K-6628Other ComponentsPin 25 9K-4060Pin-Master 1 9K-4062Bushing 25 9K-4061Bushing-Master 1 7K-2020Seal (Spring Washer) 104 7K-2018Spacer 2 9K-4059Track Hardware (1)

Bolt 104 7H-3597Nut 104 1M-1408

PM565B, PM565 TRACK SHOES6.75" (171.5 mm) PITCH – 5/8" BOLT


NUMBERTriple Grouser (plate thickness 12 mm) 13.7 in (348 mm) 105-5013Triple Grouser (plate thickness 13 mm, curved leading edge) 13.7 in (348 mm) 9G-6396Padded Shoe Assembly (Polyurethane) 13.7 in (348 mm) 236-8282

PM565B, PM565 SPROCKETS6.75" (171.5 mm) PITCH

(PER SIDE) QUANTITY PART NUMBERSprocket Rim (19 Tooth) 2 1G-6133Bolt 36 8T-4140Washer 36 7X-0515

PM565B IDLERSSYMMETRIC SEAL DESIGN


Components of GroupIdler Assembly 1 190-2495


821

PM565B, PM565PM565B IDLERSSYMMETRIC SEAL DESIGN(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERGroup 4 190-1551Bearing (2) 2 8P-7002Shaft 1 160-9757Collar 2 160-9756Retainer 2 160-9761Thrust Washer 2 137-9518Bolt 12 053-2294Washer 12 5M-2894Seal – Duo-Cone Group (Symmetric) 2 161-7247Toric Ring (2) 2 161-7249Seal – Retainer 2 2H-4145Seal – Collar 2 5K-0216Stopper 1 3T-9536Plug 1 6Y-0473Mounting Hardware (3)

End Cap 2 125-3250Pin 2 6B-6863Bolt 4 7X-0349Washer 4 8T-4122

PM565B, PM565 IDLERS*FORMER DESIGN (BOLT-ON RETAINER)


Components of GroupIdler Assembly 1 190-2495Bearing (2) 2 8P-7002Shaft 1 6T-2620Retainer 2 6T-2619Thrust Washer 2 137-9518Bolt 12 053-2294 (4)

Washer 12 5M-2894Stabilizer Ring 2 7T-4030Seal – Duo-Cone Group 2 7T-4080Toric Ring (2) 1 8P-7003O-Ring (2) 1 6V-2699Seal – Retainer 2 2H-4145

2 Component of preceding assembly or group; quantity shown is quantity per assembly or group.3 These components are not included in the idler group; quantities shown are required to mount each idler.4 Use 0S1594 bolt with former idler assembly 6T-2615

822

PM565B, PM565PM565B, PM565 IDLERS*FORMER DESIGN (BOLT-ON RETAINER)(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERGroup 4 –

Stopper 1 3T-9536Plug 1 6Y-0473Mounting Hardware (5)

End Cap 2 125-3250Pin 2 6B-6863Bolt 4 7X-0349Washer 4 8T-4122Special Application Seals (Low/High Temperature)Seal – Duo-Cone Group 2 7T-4086Toric Ring 1 7T-4087O-Ring 1 6V-2699

* 3TK108-UP

PM565 IDLERS3TK1-107


Components of GroupIdler Assembly 1 8E-8907Bushing Assembly 2 1V-9611Bolt 12 9B-7237Washer 12 8T-4896Shaft 1 8V-4714Seal GP – Duo-Cone 2 2M-2858 (6)

Toric Ring 2 1M-3097Seal – Bushing 2 1H-8128Seal – Shaft 2 7F-8267Stopper 1 7G-4332Plug 1 6Y-0473Support Assembly (RH) 1 086-9723

Support Assembly (LH) 1 086-9722Lock Pin 2 5M-5000Bolt 2 7X-0310Washer 2 5P-1076Plate 1 086-9627

5 These components are not included in the idler group; quantities shown are required to mount each idler.6 Serviced Replaced By: 9W-5224.

823

PM565B, PM565PM565 IDLERS3TK1-107(Cont'd.)(PER MACHINE) QUANTITY PART NUMBERGroup 4 –


PM565B, PM565 TRACK ROLLERS(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) 16 346-8807Mounting Hardware (7)

Cap 2 248-8807Bolt 4 1A-8537Washer 4 5P-8247


824

PR450, PR450CPR450, PR450C TRACK

6.125" (155.6 mm) PITCH – 9/16" BOLT

QUANTITY SEALED PART NUMBERLink Assembly – 28 Section 3 6Y-8950Track LinksRH Pin End Master 1 6Y-0937LH Pin End Master 1 6Y-0938RH Bushing End Master 1 6Y-0939LH Bushing End Master 1 6Y-0940RH Regular 27 6Y-0935LH Regular 27 6Y-0936Other ComponentsPin 28 6B-5278Bushing 28 6Y-1717Seal (Spring Washer) 112 6S-3146Track Hardware (1)


PR450, PR450C TRACK SHOES6.125" (155.6 mm) PITCH – 9/16" BOLT



NUMBERTriple Grouser 12.0" (305 mm) 6S-8823 6S-7124Triple Grouser 14.0" (355 mm) 6Y-1596 6Y-1597Rubber 14.0" (355 mm) 9N-4328 9N-4327

PR450, PR450C SPROCKETS(PER SIDE) QUANTITY PART NUMBERSprocket Rim (20 Tooth) 1 7X-9835Nut 10 8T-7530

PR450, PR450C IDLERS(PER MACHINE) QUANTITY PART NUMBERIdler Group 3 170-2501

Other Components (Per Idler GP)Shaft 1 086-8712Dowel 2 086-8706Gasket 2 7R-2757Bushing 2 7R-2758


825

PR450, PR450CPR450, PR450C IDLERS (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERIdler Group 3 170-2501

Gasket 1 7R-2755Plug 1 086-8710Seal GP 2 7R-2756

PR450, PR450C TRACK ROLLERS(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) 15 231-3079 (2)

Components of GroupRoller Shell (SF) 1 6S-7038Bushing Assembly 2 6S-3495Bearing 1 6Y-4744Shaft 1 6S-3171End Collar 2 3T-4283Thrust Washer 2 6S-7715Ring 2 6S-3172Seal – Duo-Cone Group 2 216-2957Toric Ring (3) 2 216-2956Seal – Shaft O-Ring 2 7D-9749Plug 1 9F-2247Mounting Hardware (4)

Bolt 4 0S-1585Washer 4 2M-0849

2 Serviced Replaced By: 1 - Roller Group (SF) 281-8339, 4 - Bolt 0S-1585, 4 - Washer 2W-0849.3 Component of preceding assembly or group; quantity shown is quantity per assembly or group.4 These components are not included in the roller group; quantities shown are required to mount each roller.

826

PR750B, PR750C, PR1000, PR1000CPR750B, PR750C, PR1000, PR1000C TRACK

6.75" (171.5 mm) PITCH – 5/8" BOLT

QUANTITY SEALED PART NUMBERLink Assembly – 32 Section 3 9W-2379Track LinksRH Master 1 9K-0029LH Master 1 9K-0028RH Regular 31 9K-6629LH Regular 31 9K-6628Other ComponentsPin 31 9K-4060Master Pin 1 9K-4062Bushing 31 9K-4061Master Bushing 1 7K-2020Seal (Spring Washer) 128 7K-2018Spacer 2 9K-4059Track Hardware (1)

Bolt 128 7H-3597Nut 128 1M-1408

PR750B, PR750C, PR1000, PR1000C TRACK SHOES6.75" (171.5 mm) PITCH – 5/8" BOLT


NUMBERTriple Grouser 18.0" (460 mm) 5N-4313

PR750B, PR750C, PR1000, PR1000C SPROCKETS(PER SIDE) QUANTITY PART NUMBERSprocket Assembly 1 7X-7248Sprocket Rim (Weld On) (23 Tooth) 1 3T-9153Nut 16 3K-0453

PR750B, PR750C, PR1000, PR1000C IDLERS (SPROCKET TYPE)(PER MACHINE) QUANTITY PART NUMBERSprocket Assembly 3 8C-1149Sprocket Rim (Weld On) (23 Tooth) 3 3T-9153

Other Components (Per Idler)Shaft 1 9N-8381Bearing Assembly 2 8T-4403Retainer 2 8T-4506


827

PR750B, PR750C, PR1000, PR1000CPR750B, PR750C, PR1000, PR1000C CARRIER ROLLERS

(PER MACHINE) QUANTITY PART NUMBERGroup 6 6K-9880Components of GroupRoller Shell 1 9W-6174Shaft 1 6K-9861Plate - Retainer 1 6K-9860Bolt 2 6V-4791Cup 2 1M-8736Cone 2 1M-8735Ring 1 1M-7914Cover 1 3K-6638Collar Assembly 1 1M-7918Plug 1 2P-0347Bolt 3 0L-1351Washer 3 5M-2894Seal – Duo-Cone Group 1 9W-5224Toric Ring (2) 2 1M-3097Seal – Cover 1 5H-8848Seal – Plug 1 1S-8947Seal – Shaft O-Ring 1 1H-9696

PR750B, PR750C, PR1000, PR1000C TRACK ROLLERS(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) 12 118-1608Components of GroupRoller Shell (SF) 1 9P-7782Bushing Assembly 2 1V-9611Shaft 1 118-1610End Collar 2 118-1616Bolt 12 2P-3201Seal – Duo-Cone Group 2 9W-5224Toric Ring (3) 2 1M-3097Seal – Bushing O-Ring 2 1H-8128Seal – Shaft O Ring 2 7F-8267Stopper 1 7G-4332Plug 1 6Y-0473Mounting Hardware (4)

Bolt 4 1A-1135Washer 4 5P-8247

2 Component of preceding group; quantity shown is the quantity per group.3 Component of preceding assembly or group; quantity shown is quantity per assembly or group.4 These components are not included in the roller group; quantities shown are required to mount each roller.

828

AP650B, BG225CAP650B, BG225C SEALED AND LUBRICATED TRACK

9DN504-UP, 5GN506-UP6.125" (155.6 mm) PITCH – 9/16" BOLT

QUANTITY PART NUMBERLink Assembly – 46 Section 2 222-2265Components of Link AssemblyTrack LinksRH Pin End Master 1 6Y-0937LH Pin End Master 1 6Y-0938RH Bushing End Master 1 6Y-0939LH Bushing End Master 1 6Y-0940RH Regular 45 6Y-0935LH Regular 45 6Y-0936Other ComponentsPin 46 154-3660 (1)

Bushing 46 111-1522Seal Assembly (Rigid) 92 250-4002Thrust Ring 92 6S-9049Stopper 46 5G-2247Plug 46 6Y-0473Track Hardware (2)

Bolt 184 8S-4745Nut 184 7K-2017Master Bolt 4 8S-4747Lock Nut (To Retain Pad Assemblies) 92 2K-4821

AP650B, BG225C TRACK6.125" (155.6 mm) PITCH – 9/16" BOLT


Components of Link AssemblyTrack LinksRH Pin End Master 1 6Y-0937LH Pin End Master 1 6Y-0938RH Bushing End Master 1 6Y-0939LH Bushing End Master 1 6Y-0940RH Regular 45 6Y-0935LH Regular 45 6Y-0936Other ComponentsPin 46 6B-5278Bushing 46 6Y-1717

1 Service Replaced by 303-9455.2 Not part of link assembly; required to assemble track group.3 Upgrade to Sealed and Lubricated Link Assembly 222-2265.

829

AP650B, BG225CAP650B, BG225C TRACK6.125" (155.6 mm) PITCH – 9/16" BOLT(Cont'd.)


Seal (Spring Washer) 184 6S-3146Track Hardware (4)

Bolt 184 8S-4745Nut 184 7K-2017Master Bolt 4 8S-4747Lock Nut 92 2K-4821

AP650B, BG225C TRACK SHOES6.125" (155.6 mm) PITCH – 9/16" BOLT

TYPE WIDTH PART NUMBERRubber Bonded Pad Assembly 14.0" (355 mm) 132-1998Plate Backing 14.0" (355 mm) 136-1090Plate Backing (Master) 14.0" (355 mm) 136-1135

AP650B, BG225C SPROCKETS(PER SIDE) QUANTITY PART NUMBERSprocket (25 Tooth) 1 105-8884Bolt 20 8T-5042Washer 20 8T-4123

AP650B, BG225C IDLERS(PER MACHINE) QUANTITY PART NUMBERIdler Group (Serviced as separate parts) 2 –

Components of GroupIdler Shell 1 5E-7938Shaft Assembly 1 115-9254Cup 2 006-7231Cone 1 006-7232Cone 1 4D-3882Retainer 1 7R-0227Cover 1 7R-0226Lock 1 7R-0228Seal 1 1J-4034Bolt 3 8T-8917Bolt 4 4M-0061Washer 4 8T-4224

3 Upgrade to Sealed and Lubricated Link Assembly 222-2265.4 Not part of link assembly; required to assemble track group.

830

AP650B, BG225CAP650B, BG225C CARRIER ROLLERS

(PER MACHINE) QUANTITY PART NUMBERGroup 2 6S-3609Components of GroupRoller Shell 1 172-0160Shaft 1 6K-9861Cup 2 1M-8736Cone 2 1M-8735Ring 1 1M-7914Cover 1 4H-9527Collar Assembly 1 1M-7918Plate - Retainer 1 6K-9860Bolt 5 0L-1351Washer 5 3B-4506Bolt 2 6V-4791Seal – Duo-Cone Group 1 9W-5224Toric Ring (5) 2 1M-3097Seal – Cover 1 4H-9628Seal – Shaft O-Ring 1 1H-9696

AP650B, BG225C TRACK ROLLERS (FRONT)(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) (Serviced as separate parts) 8 –

Components of GroupRoller Shell 1 5E-7941Cone 1 006-7232Cup 2 006-7231Cone 1 4D-3882Retainer 1 7R-0227Cover 1 7R-0226Lock 1 7R-0228Seal 1 1J-4034Bolt 3 8T-8917Bolt 4 4M-0061Washer 4 8T-4224

AP650B, BG225C TRACK ROLLERS (REAR)(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) 6 231-3079 (6)

Components of GroupRoller Shell (SF) 1 6S-7038

5 Component of preceding group; quantity shown is the quantity per group.6 Serviced Replaced By: 1 - Roller Group (SF) 281-8339, 4 - Bolt 0S-1585, 4 - Washer 2W-0849.

831

AP650B, BG225CAP650B, BG225C TRACK ROLLERS (REAR) (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) 6 231-3079 (6)

Bushing Assembly 2 6S-3495Bearing (7) 1 6Y-4744Shaft 1 6S-3171Ring 2 6S-3172End Collar 2 3T-4283Thrust Washer 2 6S-7715Seal — Duo-Cone Group 2 216-2957Toric Ring (7) 2 216-2956Seal – Shaft O-Ring 2 7D-9749Plug 1 9F-2247Mounting Hardware (8)

Bolt 12 5P-2566Washer 12 8T-4223


832

AP1050B, BG245CAP1050B, BG245C SEALED AND LUBRICATED TRACK

6ZN248-UP, 4XN148-UP6.125" (155.6 mm) PITCH – 9/16" BOLT

QUANTITY PART NUMBERLink Assembly – 50 Section 2 222-3058Components of Link AssemblyTrack LinksRH Pin End Master 1 6Y-0937LH Pin End Master 1 6Y-0938RH Bushing End Master 1 6Y-0939LH Bushing End Master 1 6Y-0940RH Regular 49 6Y-0935LH Regular 49 6Y-0936Other ComponentsPin 50 154-3660Bushing 50 111-1522Seal Assembly (Rigid) 100 250-4002Thrust Ring 100 6S-9049Stopper 50 5G-2247Plug 50 6Y-0473Track Hardware (1)


AP1050B, BG245C TRACK6.125" (155.6 mm) PITCH – 9/16" BOLT


Track LinksRH Pin End Master 1 6Y-0937LH Pin End Master 1 6Y-0938RH Bushing End Master 1 6Y-0939LH Bushing End Master 1 6Y-0940RH Regular 49 6Y-0935LH Regular 49 6Y-0935Other ComponentsPin 50 6B-5278Bushing 50 6Y-1717Seal (Spring Washer) 200 6S-3146Track Hardware (1)

1 Not part of link assembly; required to assemble track group.2 Upgrade to 222-3058 Sealed and Lubricated Link Assembly.

833

AP1050B, BG245CAP1050B, BG245C TRACK6.125" (155.6 mm) PITCH – 9/16" BOLT(Cont'd.)



AP1050B, BG245C TRACK SHOES6.125" (155.6 mm) PITCH – 9/16" BOLT



NUMBERPad 14.0" (355 mm) 132-1998 132-1998Plate Backing 14.0" (355 mm) 136-1090 136-1135

AP1050B, BG245C SPROCKETS(PER SIDE) QUANTITY PART NUMBERSprocket Assembly (25 Tooth) 1 105-8884Bolt 20 8T-5042Washer 20 8T-4123

AP1050B, BG245C IDLERS(PER MACHINE) QUANTITY PART NUMBERIdler Group (Serviced as separate parts) 2 –

Components of GroupIdler Shell 1 5E-7938Shaft Assembly 1 115-9254Cup 2 006-7231Cone 1 006-7232Cone 1 4D-3882Retainer 1 7R-0227Cover 1 7R-0226Lock 1 7R-0228Seal 1 1J-4034Bolt 3 8T-8917Bolt 4 4M-0061Washer 4 8T-4224

2 Upgrade to 222-3058 Sealed and Lubricated Link Assembly.

834

AP1050B, BG245CAP1050B, BG245C CARRIER ROLLERS


AP1050B, BG245C TRACK ROLLERS (FRONT AND CENTER)(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) (Serviced as separate parts) 8 –

Components of GroupRoller Shell 1 5E-7941Cone 1 006-7232Cup 2 006-7231Cone 1 4D-3882Retainer 1 7R-0227Cover 1 7R-0226Lock 1 7R-0228Seal 1 1J-4034Bolt 3 8T-8917Bolt 4 4M-0061Washer 4 8T-4224

AP1050B, BG245C TRACK ROLLERS (REAR)(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) 8 231-3079 (4)

Components of GroupRoller Shell (SF) 1 6S-7038

3 Component of preceding group; quantity shown is the quantity per group.4 Serviced Replaced By: 1 - Roller Group (SF) 281-8339, 4 - Bolt 0S-1585, 4 - Washer 2W-0849.

835

AP1050B, BG245CAP1050B, BG245C TRACK ROLLERS (REAR) (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) 8 231-3079 (4)

Bushing Assembly 2 6S-3495Bearing (5) 1 6Y-4744Shaft 1 6S-3171Ring 2 6S-3172End Collar 2 3T-4283Thrust Washer 2 6S-7715Seal — Duo-Cone Group 2 216-2957Toric Ring (5) 2 216-2956Seal – Shaft O-Ring 2 7D-9749Plug 1 9F-2247Mounting Hardware (6)

Bolt 12 5P-2566Washer 12 8T-4223


836

AP1050AP1050 SEALED AND LUBRICATED TRACK

6.125" (155.6 mm) PITCH – 9/16" BOLT

QUANTITY PART NUMBERLink Assembly – 50 Section 2 222-3058Components of Link AssemblyTrack LinksRH Pin End Master 1 6Y-0937LH Pin End Master 1 6Y-0938RH Bushing End Master 1 6Y-0939LH Bushing End Master 1 6Y-0940RH Regular 49 6Y-0935LH Regular 49 6Y-0936Other ComponentsPin 50 154-3660Bushing 50 111-1522Seal Assembly (Rigid) 100 250-4002Thrust Ring 100 6S-9049Stopper 50 5G-2247Plug 50 6Y-0473Track Hardware (1)


AP1050 SEALED TRACK6.125" (155.6 mm) PITCH – 9/16" BOLT

(PER MACHINE) QUANTITY SEALED PART NUMBERLink Assembly – 50 Section 2 – (2)

Track LinksRH Pin End Master 1 6Y-0937LH Pin End Master 1 6Y-0938RH Bushing End Master 1 6Y-0939LH Bushing End Master 1 6Y-0940RH Regular 49 6Y-0935LH Regular 49 6Y-0936Other ComponentsPin 50 6B-5278Bushing 50 6Y-1717Seal (Spring Washer) 200 6S-3146Track Hardware (1)

Bolt 196 4K-7038

1 Not part of link assembly; required to assemble track group.2 Upgrade to 222-3058 Sealed and Lubricated Link Assembly.

837

AP1050AP1050 SEALED TRACK6.125" (155.6 mm) PITCH – 9/16" BOLT(Cont'd.)(PER MACHINE) QUANTITY SEALED PART NUMBERLink Assembly – 50 Section 2 – (2)

Nut 196 7K-2017Master Bolt 4 5A-3187

AP1050 TRACK SHOES6.125" (155.6 mm) PITCH – 9/16" BOLT



NUMBERTriple Grouser 12.0" (305 mm) 6S-8823 6S-7124Triple Grouser 14.0" (355 mm) 6Y-1596 6Y-1597Rubber Bonded 14.0" (355 mm) 9N-4328 9N-4327Polyurethane Bonded 14.0" (355 mm) 1G-5515 1G-5516

AP1050 SPROCKETS(PER SIDE) QUANTITY PART NUMBERSprocket Assembly (25 Tooth) 1 5E-7937Bolt 16 8T-5042Washer 16 8T-4123

AP1050 IDLERS(PER MACHINE) QUANTITY PART NUMBERIdler Group (Serviced as separate parts) 2 –

Components of GroupIdler Shell 1 5E-7938Spindle Assembly 1 7R-0234Cup 2 006-7231Cone 1 006-7232Cone 1 4D-3882Retainer 1 7R-0227Cover 1 7R-0226Lock 1 7R-0228Seal 1 1J-4034Bolt 3 8T-8917Bolt 4 4M-0061Washer 4 8T-4224

2 Upgrade to 222-3058 Sealed and Lubricated Link Assembly.

838

AP1050AP1050 CARRIER ROLLERS


AP1050 TRACK ROLLERS(PER MACHINE) QUANTITY PART NUMBERSingle Flange (SF) (Serviced as separate parts) 12 –

Components of GroupRoller Shell (SF) 1 5E-7941Shaft 1 7R-0241Cup 2 006-7231Cone 1 006-7232Cone 1 4D-3882Retainer 1 7R-0227Cover 1 7R-0226Bolt 4 4M-0061Washer 4 8T-4224Seal 1 1J-4034Plate Lock 1 7R-0228Bolt 3 8T-8917

AP1050 TRACK ROLLERS (REAR)(PER MACHINE) QUANTITY PART NUMBERNo Flange (NF) (Serviced as separate parts) 2

Components of Group


839

AP1050AP1050 TRACK ROLLERS (REAR) (Cont'd.)(PER MACHINE) QUANTITY PART NUMBERNo Flange (NF) (Serviced as separate parts) 2

Roller Shell 1 125-7765Shaft 1 7R-0241Bearing 1 125-7766Race 1 –Bearing 1 –

Spacer 1 –

Retainer 1 125-7768Cover 1 125-7769Lock 1 7R-0228Spacer 1 –

Spacer 1 –

Bolt 3 8T-8917Bolt 6 9B-7237Washer 6 8T-4896Seal 1 4B-9371Fitting 1 3B-8489Seal (Rear) 1 129-8552Screw 3 031-6100

840

AP1055B BG2455CAP1055B BG2455C DRIVE BELTS

(PER MACHINE) QUANTITY WIDTH PART NUMBERDrive Belt (Wide) 2 18.0" (457 mm) 1R-1317 (1)

AP1055B BG2455C DRIVE WHEELS(PER MACHINE) QUANTITY PART NUMBERWheel Assembly 4 1R-1124Mounting Nut (2) 12 111-8207

AP1055B BG2455C IDLERS(PER MACHINE) QUANTITY PART NUMBERIdler Assembly 4 120-7027Mounting Stud (3) 24 3V-4045Mounting Nut (3) 24 111-8207

AP1055B BG2455C MID-ROLLERS(PER MACHINE) QUANTITY PART NUMBERRoller Assembly 20 1R-1198Bolt (4) 8 5C-9553Nut (4) 8 8T-4205

1 Serviced Replaced by: 294-0541.2 Quantities required per two wheel assemblies.3 Quantities required per two idler assemblies.4 Quantities required per two roller assemblies.

841

Production InformationProduct Information — LINK ASSEMBLIES .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 842

LINK ASSEMBLIES .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 842Product Information — TRACK LINKS .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 843

TRACK LINKS .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 843SPLIT MASTER LINK ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 844SystemOne TRACK CLAMP MASTER... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 845

Product Information — TRACK PINS / TRACK BUSHINGS ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 846TRACK PINS / TRACK BUSHINGS ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 846

Product Information — TRACK SEALS.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 848TRACK SEALS.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 848SEALED AND LUBRICATED TRACK SEALS... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 849

Product Information — SPROCKETS ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 850SPROCKETS ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 850

Product Information — TRACK SHOES ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 852TRACK SHOES ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 852TRACK SHOES ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 853TRACK SHOE DATA... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 854

Product Information — TRACK HARDWARE .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 856TRACK HARDWARE .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 856TRACK HARDWARE .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 857

Product Information — TRACK ROLLERS .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 859TRACK ROLLERS .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 859For Excavators.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 861Track Roller Sequence ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 862

Product Information — CARRIER ROLLERS .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 864CARRIER ROLLERS.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 864

Product Information — IDLERS... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 865IDLERS... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 865

Product Information — GUARDS... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 866TRACK ROLLER GUARDS... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 866

Product Information — PROPER TRACK SAG... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 867PROPER TRACK SAG – MACHINES WITHOUT CARRIER ROLLERS .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 867

Product Information — TRACK ROLLER FRAME EXTENSION... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 868Track Roller Frame Extension Specifications .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 868

842

Product Information — LINK ASSEMBLIESLINK ASSEMBLIESFunctions• Provide a rail for the machine to run on.• Provide a means to attach track shoes.• Transmits driving force from track bushing to track shoe.

Sleeve Bearing TrackRequirements• Flexible joints between sections.• Matched wear and structural life of components.• Components replaceable and/or reusable.Features• Assembled from components designed and manufactured to fit and work togetheras a system.

• Pins, bushings and links resist loosening, cracking, and breaking until worn be-yond wear limits.

• Designed for a second wear life if proper maintenance and rebuilding practicesare followed. Grease Lubricated Track

Supporting Reference Material Available• Sleeve Bearing Track Data Sheet (PEHJ0004)• Grease Lubricated Track Data Sheet (PEHP9555)• SystemOneTM Undercarriage Elevated Sprocket Machines (PEHJ0060)• SystemOne Undercarriage Oval Track Machines (PEHJ0064)• Positive Pin Retention Data Sheet (PEHP7025)• Heavy Duty Track Data Sheet (PEHP5031)• Rotating Bushing Track Data Sheet (PEHP5030)• Sealed and Lubricated Track Data Sheet (PEDP0036)

Note: Sealed Track is not offered on elevated sprocket tractors.

SystemOne Track Positive Pin Retention Track Heavy Duty Track

Rotating Bushing Track Sealed and Lubricated Track Sealed Track

843

Product Information — TRACK LINKSTRACK LINKSFunctions• Provide a continuous rail for rollers.• Support weight of the machine.Requirements• Machined to close tolerances for pin, bushing and shoe retention.• Long rail wear life.• Resist cracking, spalling and fatigue failures.• Rebuildable.Features• Forged of Deep Hardening Steel.• High body hardness.• Uniform rail hardness.• High rail design.

• Massive strut design.• Self-locking nut seats.• Rebuildable.

Deep Hardening SteelDeep Hardening Steel used in current links allows high body hardness, greater hardened depth and greater fatigueresistance than plain medium carbon steel.High Body HardnessLinks on current track-type tractors, loaders, and excavators have a high body hardness. This increases toughness,durability, fatigue resistance and improves pin and bushing retention.

Uniform Rail HardnessLink rails are pattern induction heated, spray water quenched and furnacetempered for a deep, uniform hardened depth. This gives link rails a crownhardness pattern that resists side wear and roll-over. The hardened railmatches the track roller tread and flange hardness for optimum wear life.High Rail DesignThe high rail design link has more pin boss-to-roller flange clearance (workingclearance) than former links. This means longer link and roller wear lifepotential.

RebuildabilityCat track links are rebuildable; high body hardness results in good pin and bushing retention, even after repeateddisassembly and reassembly.

Massive Strut DesignProvides the best available resistance to cracking failures that result fromflexing shoes, pins, and bushings.Self-locking Nut SeatsAllow easy installation and removal of track shoes. Also, help keep hard-ware tight.

The nut and nut seat on “L”, “N”, “R”, and “T” series tractors are roundedto reduce stress risers in the link.

Self-LockingNut Seat

Mailbox DesignNut Seat

844

Product Information — TRACK LINKSSPLIT MASTER LINKFunction• Allows convenient removal and installation of track.• Eliminates the need for a master pin and master bushing.Requirements• Wear life equal to regular link.• Same strength as regular link.• Serviceable and Reusable.Features• Bolt-together design for faster and easier assembly and disassembly.• Allows use of regular pins and bushings.• Factory assembled with lubricant.

Bolt-Together DesignRemoving and installing track has always been time consuming. To improve this, Caterpillar designed a two-pieceorsplit master track link, joined with bolts. Only a wrench is needed to separate the track in place of field presstooling.Regular Pins and BushingsSplit master links require no master pins, master bushings, nor spacers. Instead they use standard pins and bush-ings.Thus, pins and bushings in split master links wear at the same rate as all others and can be turned along withothers.NOTE: Split master links often require a master shoe, with different bolt hole pattern than other shoes andfour spe-cial track bolts.

MASTER LINK ASSEMBLING AND TORQUING PROCEDURE1. Before installing the track, the point of connection for the master link must be clean and undamaged. Remove

all paint and rust from the point of connection.2. Put 2P-2506 Thread Lubricant or 5P-3931 Anti-seize Compound on the bolt threads.3. Put the master links together and check alignment of holes for the master bolts. Install one master bolt in each

link. The bolts must turn easily in the threads when turned by hand.4. Remove the bolts. Install the master track shoe and all four master bolts.5. Tighten the master bolts to the initial torque given below, plus 1/2 turn (D9L, D8L, D10T/R/N, D9T/R/N, D8T/R/N,

D7H S&L and D6R/H receive additional 1/3 turn rather than 1/2 turn).

Model Bolt Size Initial TorqueD11N, D11R 1-3/8-12 1100 ± 50 ft. lbs. 1500 ± 150 N·mD10T, D10R, D10N, D10 1-1/8-12 650 ± 70 ft. lbs. 870 ± 90 N·mD9T, D9R, D9N, D9L 1-14 650 ± 70 ft. lbs. 870 ± 90 N·mD9H 1-14 400 ± 50 ft. lbs. 550 ± 70 N·mD8T, D8R, D8N, D8L 7/8-14 480 ± 50 ft. lbs. 650 ± 70 N·mD8K, 983, 973, D7R, D7E 7/8-14 250 ± 50 ft. lbs. 340 ± 70 N·mD7H, D6H, D5H, D6M, D6R, D6N, 517, 527 3/4-16 300 ± 50 ft. lbs. 400 ± 70 N·mD6D, 963, 955, D7G, 977, 973 3/4-16 220 ± 40 ft. lbs. 300 ± 50 N·mD4H, D5H , D5M, D5N 5/8-18 125 ± 30 ft. lbs. 170 ± 40 N·mD5G, 939, D4H, D5M HD/RBT, D5C, D4E, 943, 941,D5, 953, 951

5/8-18 120 ± 30 ft. lbs. 170 ± 40 N·m

D3, D4B, D4C, 931, 935, D3C, D4G, D3G 9/16-18 65 ± 15 ft. lbs. 90 ± 20 Nm

845

Product Information — TRACK LINKSSPLIT MASTER LINK (Cont'd.)SystemOne LINK BOXServiced at the Link Box level

• Contains two common links and two cartridges

Track Links• New rail design for increase wear life• Stronger straight link design• Stronger straight link design• Forged of deep hardened steel that provides high body hardness, hardened depth and toughness• Rail guided design for superior guiding• Self-locking nuts

Cartridge• Factory sealed and welded to control end play• Improved seal integrity through an innovative new sealing system• Uses standard Cat Synthetic SAE 75W-140 gear oil to lubricate the joint

SystemOne TRACK CLAMP MASTERMaster Links with Center StrutModel Bolt Size Initial Torque Additional TurnD6T, D6R, D6H, 963 22 mm 370 +/- 20 ft. lbs. 500 +/- 25 N·m 180ºD6N, D6M, D5H, 953 20 mm 300 +/- 20 ft. lbs. 400 +/- 25 N·m 180ºD6K, D5K 18 mm 260 +/- 20 ft. lbs. 350 +/- 25 N·m 120ºD4K, D4G, D4C, D3K, D3G, D3C 16 mm 165 +/- 20 ft. lbs. 225 +/- 25 N·m 120º

Master Links with no Center StrutModel Bolt Size Initial Torque Additional TurnD6T, D6R, D6H, 963 22 mm 300 +/- 20 ft. lbs. 400 +/- 25 N·m 360º (1)

D6N, D6M, D5H, 953 20 mm 220 +/- 20 ft. lbs. 300 +/- 25 N·m 360º (1)

D6K, D5K 18 mm 180 +/- 20 ft. lbs. 250+/- 25 N·m 360º (1)

D5C, D5G, D5N 16 mm 180 +/- 20 ft. lbs. 250+/- 25 N·m 360º (1)

1 For master links with no center strut, perform a 90º turn on each of the four bolts then repeat the 90º turn three more times for a total of360º.

846

Product Information — TRACK PINS / TRACK BUSHINGSTRACK PINS / TRACK BUSHINGSTRACK PINSFunctions• Help hold track section together.• Act as hinge with bushing at adjoining section.• Transfer loads between bushing and link.• Provide reservoir for lubricant in Sealed and Lubricated Track.

Sealed Track Pin

Sealed and LubricatedTrack Pin

Requirements• Strength — to resist flexing and cracking, even when worn to limit.• Wear Resistant.• Finished to close dimensions — for accurate press fit with link and clearances withbushing I.D.

Features• Machined from medium carbon steel.• Heat treated.– Induction hardened.– Spray water quenched.– Tempered.

• Sealed and Lubricated Track pins ground to final dimensions.

847

Product Information — TRACK PINS / TRACK BUSHINGSTRACK PINS / TRACK BUSHINGS (Cont'd.)MEDIUM CARBON STEELCaterpillar manufactures track pins from a medium carbon steel which provides a tough pin with good surfacehardness. This provides good spalling and cracking resistance in high impact conditions.Sealed and Lubricated Track pins are center drilled to provide an oil reservoir and cross drilled to provide a pas-sage for the oil to flow between the pin and bushing. After heat treatment the pin ends are ground to provide theclose final dimensions required for accurate press fit and oil retention.

TRACK BUSHINGS

Straight Wall

Stepped

Functions• Help hold track section together.• Act as hinge with pin of adjacent section.• Provide sealing surface to keep abrasives out and lubricant in with Sealed and Lubri-cated Track.

Requirements• Strength — to resist cracking, even when worn to service limits.• Finished to close dimensions — for accurate press fit into link bushing bore clear-ance with pin O.D.

• Wear resistant — on I.D. equal to pin, on O.D. greater than sprocket.• Smooth finish on end — to maximize sealing and minimize seal wear.Features• Formed by cold extrusion of low carbon steel. (Extruded bushings have smoother in-ner and outer surfaces with more uniform dimensions than machined bushings.

• Carburized and heat treated for optimum hardness and toughness.Difference between Sealed Track bushings and Sealed and Lubricated Track bushingsSealed and Lubricated Track bushings are:• Polished on the ends for a smooth sealing surface.• Shorter than Sealed Track bushings to provide the space needed in the link counter bore for the thicker thrustring and seal.

848

Product Information — TRACK SEALSTRACK SEALSSealed Track SealsFunctions• Retard abrasive entry between pin and bushing.• Prevent bushing from wearing against link counterbore.• Carry side loads.Requirements• Wear life equal to pin and bushing turn time.• Have spring-like resiliency without brittleness.

Features• Made from hardened and tempered spring steel. Seals are formed likecone shaped washers. Used in pairs, they fit into each link counter-bore. One washer butts against the bushing end, the other against thelink counterbore base. When track sections are pressed together, thewashers flatten to form a seal. The spring effect of the flattened wash-ers maintains sealing pressure as they wear. Seals are designed towear against each other instead of against the link counterbore andbushing end. This system extends internal pin and bushing life by 20-30% compared to unsealed track. Sealed Track Seals are not reusableat turn time.

Uncompressed Seals Compressed Seals

GREASE LUBRICATED TRACK SEALSInternal pin and bushing wear is usually the reason for track maintenance with Sealed Track. Caterpillar engineershave designed a track system that reduces internal pin and bushing wear on excavators. The sealing arrangementis what makes this reduction possible.

Functions• Keep abrasives out of internal pin and bushing joint.• Keep grease in joint.• Absorb side or thrust loads.• Reduction in noise compared to Sealed TrackRequirements• Pin and Bushing internal wear life affected less by external environment.• Not a lifetime lubricated track.

Features• Seal Assembly – Consists of a “W” shape polyurethane seal. The seal contacts the smooth bushing end. The sealdistributes an even load along the sealing surface to assure a 360° seal.

• Seals are designed to operate at a maximum temperature of 70° C (160° F). Exposure to high temperatures will re-duce seal life.

• Shorter bushing compared to Sealed Track.

Benefits of Grease Lubricated Track• Internal pin and bushing wear reduced as the primary maintenance consideration.• The system keeps abrasives from entering the internal pin, bushing, and link counterbore area of the joint.• Grease reduces normal friction and wear between the pin and bushing.

849

Product Information — TRACK SEALSTRACK SEALS (Cont'd.)• Decrease of internal wear and resulting track pitch extension reduces snaky track; this reduces wear on othercomponents, such as links, rollers, and guiding components.

• Most undercarriage components are reusable.• Internal bushing life is extended about 20% compared to Sealed Track.

SEALED AND LUBRICATED TRACK SEALSInternal pin and bushing wear is usually the reason for track maintenance with Sealed Track. Caterpillar engineersdesigned a track system that would eliminate internal pin and bushing wear as a maintenance consideration. Thesealing arrangement is what makes this possible.

Functions• Keep abrasives out of internal pin and bushing joint.• Keep lubricant in joint.• Absorb side or thrust loads.

Rigid Seal

Requirements• Pin and Bushing internal wear life not affected by external environment.

Features• Seal Assembly — Consists of a plastic seal and resilient rubber load ring. The sealcontacts the smooth bushing end. The rubber load ring distributes an even loadalong the sealing surface to assure a 360° seal. Seals are designed to operate at amaximum temperature of 70° C (160° F). Exposure to higher temperatures will re-duce seal life.

• Greater end play capacity from .030 to .060.• Thrust Ring — Made from hardened steel, it protects the seal assembly from sidethrust loads. The ring has notches so the oil can flow past the ring into the sealingareas.

• Rigid Seal Design now available for all Elevated Sprocket machines, Low Sprocketmachines, and Track Type Loader machines.

Benefits of Sealed and Lubricated Track• Internal pin and bushing wear eliminated as the primary maintenance consideration.• The system keeps abrasives from entering the internal pin, bushing, and link counterbore area of the joint.• Lubricant eliminates normal friction and wear between the pin and bushing.• Absence of internal wear and resulting track pitch extension reduces snaky track; this reduces wear on othercomponents, such as links, rollers and guiding components.

• Most undercarriage components are reusable.•External bushing life is extended about 50% compared to SealedTrack.

Oil• Caterpillar uses Synthetic SAE 75W–140 gear oil to lubricate the joint.

850

Product Information — SPROCKETSSPROCKETSFunctions• Transfer driving loads from the final drive to the track through the bushings.Requirements• Wear life — equal to at least one side of the bushing.• Strength — to resist cracking.

BOLT-ON SEGMENTSUsed on: All Track-Type Tractors and Track-Type Loaders, but not availablefor D4E or 941.

Bolt-on Segments

Features• Formed from Deep Hardening Steel.• Both segments and sprockets are manufactured to accurately mate withbushings.

• Tightly controlled manufacturing processes to ensure proper mountingsegment hardware.

Benefits of Bolt-on Sprocket Segments• Reduced maintenance and downtime.• No need to remove track group to replace sprockets.• Segments are easier to handle.• No risk of misalignment.• Reversible — switching segments to opposite sides of the machine can increase sprocket life.

Conversion to Bolt-on Sprocket SegmentsA one-piece weld-on adapter ring is available for converting some oldermodels to bolt-on sprocket segments. Once a customer converts a machineto the bolt-on design, he will save both labor and downtime cost when thesegments need replacing.

Cast Assembly and Weld-on Rim

Torquing ProcedureProper installation of sprocket segments is critical in preventing segmentloosening and subsequent loss/damage to other parts. Install segments us-ing the following guidelines:1. Lubricate the bolt threads with 5P-3931 Anti-Seizure Compound.2. Make sure the washer is against the final drive hub (not segment).3. Tighten all bolts to the following:

851

Product Information — SPROCKETSSPROCKETS (Cont'd.)Model Initial TorqueD11R, D11N, D10T, D10R, D10N, D10, D9L 650 ft. lb. ± 50 ft. lb. (870 ± 70 N·m)D9T, D9R, D9N 480 ft. lb. ± 50 ft. lb. (650 ± 70 N·m)D9H, D8K, 983 250 ft. lb. ± 50 ft. lb. (340 ± 70 N·m)D7E 330 ft. lb. ± 40 ft. lb. (450 ± 50 N·m)D8T, D8R, D8N, D8L, D7R, D7H, D7G, 977, 973 220 ft. lb. ± 40 ft. lb. (300 ± 55 N·m)D6T, D6R, D6H, D6D, D5H, D5B, D4H, D5C, D5M, D6M,D5N, D6N, D6K

130 ft. lb. ± 30 ft. lb. (175 ± 40 N·m)

953B and 943, 963, 955, 939 130 ft. lb. ± 30 ft. lb. (175 ± 40 N·m)953C 75 ft. lb. ± 15 ft. lb. (100 ± 20 N·m)D3G, D4G, D4C, D3C, 935, 933, 931 50 ft. lb. ± 7ft. lb. (70 ± 10 N·m)

4. Then tighten an additional 1/3 turn. This stretches the bolt properly for good retention.

CAST ASSEMBLY, WELD-ON, AND BOLT-ON RIMUsed on: Earlier Tractors, Earlier Loaders, and 200 Series Excavators. Current 300 Series Excavators have bolt-onone piece sprockets.

Features• Cast from Deep Hardening Steel.

Deep Hardening SteelCat sprockets are formed from Deep Hardening Steel which allows about twice the hardened depth as plain mediumcarbon steel.

852

Product Information — TRACK SHOESTRACK SHOESFunctions• Support the machine’s weight on the ground• Provide traction.

Requirements• Strength — to resist bending and breaking.• Wear resistant grouser and plate.• Retention — to resist loosening during link wear life.

Features• Furnace or induction hardened, die quenched and tempered.• Curved leading and trailing edge.• Rebuildable

Curved leading and trailing edges provide stiffness to reduce shoe bending and hardware loosening. Overlappededges keep debris from lodging between shoes as the track bends around the sprocket and idler.

Track Shoe SelectionThe wide variety of working conditions makes choosing the right shoe very important. A good rule is: choose thenarrowest shoe that provides adequate flotation. Shoes that are too wide will loosen, bend and crack more easily.They require more power to turn, and affect maneuverability. Shoes of the correct width give maximum performanceand the lowest possible cost to the entire system.

Caterpillar offers the following track shoes:

SINGLE GROUSER MODERATE SERVICE SHOES (MS)The Moderate Service shoe is the best shoe for low to medium impact and abrasive conditions. Itgives the best penetration and traction, resists wear and bending and is available in variouswidths and modifications. Rolled from modified medium carbon steel.

Single Grouser Shoe

SINGLE GROUSER EXTREME SERVICE SHOES (ES)Extreme Service shoes should be used wherever the Moderate Service shoe bends or breaks, orwhere links out last shoes. Extreme Service shoes are both stronger to resist bending and break-ing and have more allowable wear material than the Moderate Service shoe. Greater Strength –Extreme Service shoes are rolled from tough alloy steel. They are also more massive. They areheat treated to provide a higher tensile strength to resist bending and breaking in high impactconditions. More Wear Material – Extreme Service shoes have up to approximately 50% more al-lowable wear material than the respective Moderate Service shoe. More Rebuildable – Becauseof the thicker section on the Extreme Service shoe, it can be successfully regrousered more timesthan the Moderate Service shoe (when used in similar conditions and worn to comparable limits).

SINGLE GROUSER SUPER EXTREME SERVICE SHOES (SES)Super Extreme Service shoes provide approximately 25% more life than the Extreme Service inhigh wear applications.

853

Product Information — TRACK SHOESTRACK SHOESMULTI-GROUSER SHOE (Triple and Double Grouser)Multi-Grouser shoes have less penetration and traction than SingleGrouser shoes, but better turning ability. These shoes are standardon track-type loaders and excavators because less turning resist-ance and greater maneuverability are needed. By spreading tractorweight over the larger contact area of several low profile grousers,the turning resistance is reduced and maneuverability improved. Triple Grouser

Double Grouser

SPECIAL SHOESSelf-Cleaning, Low Ground Pressure ShoeThis shoe is designed for use in loose, muddy conditions. As theseshoes move around the sprocket and idler, they separate from oneanother, causing debris to fallout. These cast steel shoes come inwidths that make them suitable for LGP machines only and shouldnot be used in high abrasive or high impact conditions.

Low Ground Pressure Shoe

ChopperThis shoe is designed for use in demolition and landfill applicationswhere compaction is required. Designed with a full length frontgrouser, two angled side grousers and a center opening for mate-rial extrusion, these shoes provide long wear life and structural lifein the most demanding underfoot conditions. Chopper ShoeSteel Mill FlatDesigned for use in hot slag and other heavy abrasive materialswhere low penetration and high wear and bending resistance isrequired. Large, countersunk bolt holes are designed to protectthe bolt heads.

Steel Mill FlatTRACK SHOE SUPPORTS FOR HYDRAULIC EXCAVATORSForestry applications for Hydraulic Excavators generally involve high impact and severe underfoot conditions forthe undercarriage components. For this reason, full length track shoe supports mounted to the track roller frameare recommended for forestry applications. These shoe supports are intended to limit the torsional loads experi-enced by the link assembly when the machine encounters uneven underfoot conditions.As the machine rides over objects such as rocks or stumps, the track shoe deflects and the track chain begins totwist. With track shoe supports, the shoes contact the support and prevent further twisting of the chain. These sup-ports limit the loads going into the link assembly and significantly reduce the occurrence of link cracking and trackpin walking.

854

Product Information — TRACK SHOESTRACK SHOE DATA

Model TypeGrouser Height Plate Thickness

inch mm inch mmD11R, D11N ES 3.98 101.0 .96 24.5D10T, D10R, D10N ES 3.66 93.0 .81 20.5

SES 3.98 101.0 .88 22.5D10 MS 3.66 93.0 .81 20.5

ES 3.98 101.0 .88 22.5D9T, D9R, D9N MS 3.03 77.0 .65 16.5

ES 3.31 84.0 .75 19.0SES 3.66 93.0 .83 21.0

D9L MS 3.07 78.0 .75 19.0ES 3.66 93.0 .83 21.0

D9H MS 3.43 87.0 .69 17.5ES 3.66 93.0 .81 20.5SES 3.98 101.0 .88 22.5

D8T, D8R, D8N, D8L MS 3.07 78.0 .65 16.5ES 3.31 84.0 .75 19.0SES 3.66 93.0 .83 21.0

D8K MS 3.03 77.0 .65 16.5ES 3.07 78.0 .75 19.0SES 3.66 93.0 .83 21.0

D7H.D7R, D7G, D7E MS 2.76 70.0 .56 14.2ES 2.81 71.5 .67 17.0

D6T, D6H, D6R, 527, D6D MS 2.56 65.0 .51 13.0ES 2.95 75.0 .59 15.0

D5H, D6M, 517, D6N MS 2.24 57.0 .51 13.0ES 2.60 66.0 .55 14.0

D5B MS 2.25 57.2 .50 12.7D4H.D5C, D5M.D5N, D6K MS 1.89 48.0 .43 11.0

ES 2.24 57.0 .51 13.0D4E, D5C, D5G MS 1.88 47.0 .44 11.2

ES 2.25 57.2 .50 12.7D3, D4B, D4C, D3C MS 1.85 47.0 .33 8.50

D3G.D4G ES 2.10 53.5 .39 10.0983 DG 1.75 44.5 .75 19.0977, 973 DG 1.93 49.0 .61 15.5955, 963 DG 1.67 42.5 .55 14.0

TG 1.06 27.0 .59 15.0951,953 DG 1.48 37.5 .51 13.0

TG .96 24.5 .51 13.0939, 941,943 DG 1.46 37.0 .43 11.0931,933,935 SG 1.85 47.0 .33 8.50

TG .61 15.5 .39 10.05130 DG 2.91 74.0 1.1 28.0375/385B/5080/5090B DG 1.89 48.0 .81 20.5

ES 3.66 93.0 .81 20.5365B DG* 1.89 48.0 .81/.75 20.5/19. 0

350 ES 3.07 78.0 .75 19.0DG 1.75 44.5 .75 19.0

TG* 1.34 34.0 .61/.55 15.5/14. 0

345B ES 2.81 71.5 .67 17.0DG 1.93 49.0 .61 15.5TG* 1.34 34.0 .61/.55 15.5/14. 0

330 ES 2.81 71.5 .67 17.0

855

Product Information — TRACK SHOESTRACK SHOE DATA (Cont'd.)

Model TypeGrouser Height Plate Thickness

inch mm inch mm

DG 1.93 49.0 .61 15.5TG* 1.18 30.0 .51/. 43 13.0/11. 0

TG (HD) 1.34 34.0 .67 17.0

325, 320S ES 2.95 75.0 .59 15.0DG 1.67 42.5 .55 14.0

TG* 1.1 28.0 .51/. 43 13.0/11. 0

TG (HD) 1.06 27.0 .59 15.0

324/323/322/321/320/319 ES 2.6 66.0 .55 14.0DG 1.38 35.0 .51 13.0TG* 1.02 26.0 .39/. 33 10.0/8. 5

TG (HD) 1.1 28.0 .49 12.5

318/317/315 TG* 1.02 26.0 .39/. 33 10.0/8. 5

TG (HD) 1.1 28.0 .49 12.5

314/313/312/311 TG 1.0 25.0 .37 9.50308/307 B/307 TG* .79 20.0 .37/3 1 9.5/8.0

MS — Moderate ServiceES — Extreme Service

SES — Super Extreme ServiceDG — Double Grouser

TG (HD) — Triple Grouser HeavyTG — Triple Grouser

* Two track shoe section offered (only plate thickness different)

856

Product Information — TRACK HARDWARETRACK HARDWARETRACK BOLTSFunction• Hold the shoe on the link.

Rolled Threads

Requirements• Wear resistant head.• Tensile and shear strength.

Features• Induction hardened heads.• Rolled threads.• Tensile strength exceeds Grade 8 specifications.• Reusable

Induction Hardened HeadsTrack bolt heads are induction hardened to protect them from deforming in high impact, highly abrasive conditionsto extend their wear life.

Rolled ThreadsRolled threads resist stripping better than cut threads. By rolling, the natural flow lines of the steel follow thethread contours. Cutting threads cut the flow lines, making the threads weaker.

StrengthCat track bolts exceed Grade 8 strength requirements with a minimum tensile strength of 160,000 PSI.

TRACK NUTSFunction:• Used with the track bolt to hold the shoe to the link.

Square Nut Design Mailbox Nut Design

Requirements• Strength• Retention on bolt.

Features• Furnace hardened and tempered.• Self-locking.

Furnace hardenedTrack nuts are thru-hardened and tempered to match or exceed bolt strength. Track nut core hardness is Rc30minimum.

Self-lockingTrack nuts are designed to fit into the nut seats in the link strap area. Broached grooves hold the nut so bolts canbe removed from the shoe.

857

Product Information — TRACK HARDWARE

TRACK HARDWARE

TRACK SHOE TIGHTENING PROCEDURETo insure that track hardware is properly tightened, follow the procedure outlined below:1. Remove paint from track link and pad mating surfaces.2. Lubricate the bolt threads and bolt washer faces. (1)

3. Tighten the bolts to the specified torque.4. Give each bolt an additional 1/3 turn.Initial torque draws the parts together tightly. An additional 1/3 turn gives the bolt proper stretch for good reten-tion. Stretching stresses the bolt to insure that the bolt’s maximum clamping force is used. (See Split Master Linksection for split master link bolt tightening procedure.)

BOLT TORQUE CHARTSocket Size

BoltDiameter

Model inch mm inch mm Initial Torque(2)

D11R, D11N, 5130 2 1/16 — 1 3/8 — 1100 ± 50 ft. lbs. (1500 ± 150 N·m)

D10T, D10R D10N, D10 1 11/16 — 1 1/8 — 650 ± 50 ft. lbs. (870 ± 90 N·m)

D9T, D9R, D9N, D9L 1 1/2 — 1 — 650 ± 50 ft. lbs. (870 ± 90 N·m)

D9H, 245 1 1/2 — 1 — 400 ± 50 ft. lbs. (550 ± 70 N·m)

D8T, D8R, D8N, D8L 1 5/16 — 7/8 — 480 ± 50 ft. lbs. (650 ± 70 N·m)

D7R, D7H HD/RBT, D8K, 983, 235, 973 1 5/16 — 7/8 — 250 ± 50 ft. lbs. (340 ± 70 N·m)

517, 527, D7H, D6H, D5H HD/RBT, D7R, D6R, D6T,D6M HD/RBT,D6N HD/RBT

1 1/8 — 3/4 — 300 ± 50 ft. lbs. (400 ± 70 N·m)

D7G, D6D, 977, 973, 963, 955, 235 1 1/8 — 3/4 — 220 ± 40 ft. lbs. (300 ± 50 N·m)

D5N, D5M, D5H, D5G, D5C, D5B, D4H, D4E,953, 951, 943, 941, 215,225, 213, 211, 205, 939

15/16 — 5/8 — 120 ± 30 ft. lbs. (170 ± 40 N·m)

D4G, D3G, D4C, D3C, D3, D4B, 931, 935, 213, 211, 205 7/8 — 9/16 — 65 ± 15 ft. lbs. (90 ± 20 N·m)

MS1600 — 50 — 33 650 ± 50 ft. lbs. (870 ± 70 N·m)

385B/5090 — 41 — 30 675 ± 70 ft. lbs. (900 ± 100 N·m)

375/5080, 365B — 41 — 27 410 ± 50 ft. lbs. (550 ± 70 N·m)

E650, MS650, MS580, 345B — 32 — 24 480 ± 50 ft. lbs. (650 ± 70 N·m)

350, 345B, 330, E450, MS580, MS450, MS380 — 32 — 22 370 ± 50 ft. lbs. (500 ± 70 N·m)

325, 324, 323, 322, 321, 320, 319, 318, 317, 315, E300, E240, E200,320S, MS300, MS280, MS240, MS230

— 30 — 20 300 ± 50 ft. lbs. (400 ± 70 N·m)

E180, MS180 — 27 — 18 190 ± 40 ft. lbs. (260 ± 50 N·m)

314, 313, 312, 311, E140, E120, E110, MS160, MS140, MS120,MS110

— 24 — 16 130 ± 30 ft. lbs. (180 ± 40 N·m)

308, 307, MS90, MS70L — 22 — 14 70 ± 15ft. lbs. (95 ± 20 N·m)

307, E070 3/4 — 1/2 — 165 ± 15ft. lbs. (220 ± 20 N·m)

SystemOne BOLT TORQUE CHARTModel Bolt Diameter - mm Initial Torque (2)

D3G/K, D4G/K 16 110 ± 20 ft. lbs. (145 ± 25 N·m)D5G/N 16 110 ± 20 ft. lbs. (145 ± 25 N·m)D5K, D6K 18 150 ± 20 ft. lbs. (200 ± 25 N·m)

1 Requires 5P-3931 anti-seize compound or 2P-2506 thread lubricant.2 Plus an Additional 1/3 Turn

858

Product Information — TRACK HARDWARE

TRACK HARDWARE (Cont'd.)

SystemOne BOLT TORQUE CHART (Cont'd.)Model Bolt Diameter - mm Initial Torque (3)

D6N, 953C/D 20 295 ± 20 ft. lbs. (400 ± 25 N·m)D6R/T, 963D 22 370 ± 20 ft. lbs. (500 ± 25 N·m)

3 Plus an Additional 1/3 Turn

859

Product Information — TRACK ROLLERSTRACK ROLLERSFunctions• Support the machine on the track.• Guide the machine along the track.

Requirements• Strength — to resist structural failure before tread wear life is utilized.• Shell tread wear life equal to links• Shell tread and flanges rebuildable.• Most internal components reusable.• No maintenance during original tread wear life.

Features• Shells forged from deep hardening steel and are designed to resist bellmouthing.• Shafts and bearings are designed to reduce friction and wear and to provide maximum strength.• Lifetime Lubricated for minimum maintenance.

Bronzed Sleeve Bearing• Sleeve design provides a large surface area for better load distribution.• Inner diameter surface is polished to a smooth finish.• Soft bronze coating in the bearing absorbs any small foreign particles before they can damage the shaft andseals.

Duo-ConeTM Seal• Seals oil in and abrasives out.• The Duo-Cone Seal consists of two metal seal rings and two rubber toric rings. The toric rings provide the properpressure to both sides of the metal seal rings.

• Resists permanent deformation and temperature changes from -40F (-40C) to 225F (107C). Extreme TemperatureSeals respond over a wider temperature range from -60F (-50C) to 325F (163C) constant and 450F (233C) peak.

• Duo-Cone Seals are designed to last through several roller shell tread lives, depending on individual conditions.For reusability guidelines, refer to SEBF8511 (Guidelines for Reusable Parts).

Oil• Cat Lifetime Lubricated Track Rollers use a 30 weight oil, which cools and lubricates better than grease.

Cat track-type tractors and loaders use both single and double flange rollers. Typically excavators use all singleflange rollers. Single flange rollers are used adjacent to the sprocket so they can be placed closer to the sprocket.Double flanged rollers are used to maximize the guiding effect wherever space permits.

SystemOne TRACK ROLLERS• Serviced at Roller Group level• Single flange roller shellForged from deep hardened steel and through hardened heat treated for internal strength to resist bellmouthingand uniform hardened depth that provides wear life equal to link wear lifeThrough hardened flanges to resist wear and prevent cracking or breakageTall flange rollers for superior guiding

• Track Roller ShaftForged and heat treated for strengthBearing surfaces are hardened and polished to reduce friction and wear

860

Product Information — TRACK ROLLERSTRACK ROLLERS (Cont'd.)• End CapsRetain the roller shaft to the track roller frame and provides serviceabilityNot part of the roller group and serviced separately

The unique characteristics of the four roller designs are as follows:

For D11R, D11N, D10, D10T, D10R, D10N, D9T, D9R, D9N, D9L, D8T, D8R, D8N, D8LTrack Roller Shell

• Forged from Deep Hardening Steel and heat treated for internal strength to resist bell-mouthing and to increase rebuildability.

• 2-piece roller shell rim• Heat treated for a deep, uniform hardened depth that provides wear life equal to linkwear life.

• Thru-hardened flanges to resist bending and improve rebuildability.• Steel-backed bronze bearings are press fit inside the shell.Track Roller Shaft• Forged and heat treated for strength.• Bearing surfaces are hardened and polished to reduce friction and wear.• Larger diameter for greater load bearing capacity.Retainer• Bolts to the ends of the track roller shells.• Transmits side loads to the roller shaft and houses the Duo-Cone Seals.End Caps• End caps retain the roller shaft to bogies, and provide serviceability.• End caps are serviced separately.

For D7R, D7H, D6R, D6H, D6N, D6M, D5H, D5N, D5M, D4H 973,963,953,943Track Roller Shell


• 2-piece roller shell rim• Heat treated for a deep, uniform hardened depth that provides wear life equal to linkwear life.

• Thru-hardened flanges to resist bending and improve rebuildability.Track Roller Shaft• Forged and heat treated for strength.• Bearing surfaces are hardened and polished to reduce friction and wear.• Center flange absorbs side thrust from roller shell.Cast Iron Bushing

• Supports the bronze sleeve bearing.• Cast from iron to absorb loads without permanent deformation.• Large lubricant reservoir to reduce heat build-up.

861

Product Information — TRACK ROLLERSTRACK ROLLERS (Cont'd.)For D7R, D7H, D6R, D6H, D6N, D6M, D5H, D5N, D5M, D4H 973,963,953,943 (Cont'd.)End Collar

• Attaches the track roller to the track roller frame.• Houses and protects the outer Duo-Cone Seal.Snap Ring Design

• Retain cast iron bushing.• Eliminates need to use bolts to retain cast iron bushing.

For ExcavatorsTrack Roller Shell

• 2-piece roller shell rim.• Forged from deep hardening steel and heat treated for internal strength to resist bellmouthing.• Heat treated for a deep, uniform hardened depth that provides good wear life• A large oil reservoir is provided for in the shell and is filled through a threaded hole located between the wearsurfaces.

• Steel-backed bronze bearing is press fit inside the shell.Track Roller Shaft

• Forged and heat treated for strength.• Bearing surfaces are hardened and polished to reduce friction and wear.• Large diameter for a greater load bearing capacity.• Straight, solid shaft, with a hole in each end to provide positive attachment of the endcollar.

• Reduces end play growth.End Collar

• Completely encircles the shaft to give added strength. Connected to the shaft by pins. Mounting surface area islarger for improved bolt retention.

For Low Sprocket D9H, D8K, D7G, D6D, D5G, D5C, D5B, D4E, D4B, D4G, D3G, D4C, D3C, D3and 983, 977, 955, 951, 941, 939, 935, 933, 931Track Roller Shell


• 2-piece roller shell rim.• Heat treated for a deep, uniform hardened depth that provides wear life equal to link wearlife.

• Thru-hardened flanges to resist bending and improve rebuildability.Track Roller Shaft• Forged and heat treated for strength.• Bearing surfaces are hardened and polished to reduce friction and wear.• Center flange absorbs side thrust from roller shell.

862

Product Information — TRACK ROLLERSFor Excavators (Cont'd.)For Low Sprocket D9H, D8K, D7G, D6D, D5G, D5C, D5B, D4E, D4B, D4G, D3G, D4C, D3C, D3and 983, 977, 955, 951, 941, 939, 935, 933, 931 (Cont'd.)Cast Iron Bushing• Supports the bronze sleeve bearing.• Cast from iron to absorb loads without permanent deformation.• Large lubricant reservoir to reduce heat build-up.End Collar• Attaches the track roller to the track roller frame.• Houses and protects the outer Duo-Cone Seal.

Track Roller SequenceUse the following charts to determine the original position of track rollers, identified by their flange type. The letter“D” represents a Double flange roller and the letter “S” represents a Single flange roller.

ELEVATED SPROCKET MACHINESModel Rollers Per Side Roller Position

D11R/N(1), D10T/R/N(1), D10(1) 8 S S D D D D S S

D9T/R/N(1), D9L 8 S S D D D D S S

D8T/R/N(1), D8L(1) 8 S S D D D D S S

D7R/H STD & LGP 7 S D S D S D S

D7R/H XR 8 S D S D D S D S

D6T/R/H STD 6 S D S D S S

D6H XL & XR 7 S D S D S D S

D6T/R/H XW & XL 7 S D S D S D S

D6T/R/H LGP 8 S D S D D S D S

D6N/M XL, D5H TSK & XL 7 S D S D S D S

D5H STD 6 S D S S D S

D6N/M LGP, D5H LGP 8 S D S D D S D S

D5M, D4H STD, D5N/M XL, D4H XL 7 S D S D S D S

D5M LGP, D4H LGP & TSK 7 S D S D S D S

D5N/M LGP, D4H LGP 8 S D S D D S D S

527 517 Skidders 7 S D S D S D S

527 517 Skidders 8 S D S D D S D S

572R, 561M, 561H 7 S D S D S D S

578 8 S S D D D D S S

583R 9 D D D D D D D D D

589 10 S S D D D D D D S S

SystemOne Track Roller Sequence:For elevated sprocket machines all rollers are single flange. Rollers per side are the same as in the table above.

1 Machines with large diameter single flange rollers.

863

Product Information — TRACK ROLLERSTrack Roller Sequence (Cont'd.)LOW SPROCKET TRACTORS AND LOADERS

Rollers Roller PositionModel Per Side F 2 3 4 5 6 7D9G & H 7 D D S D S D SD9D, E & G 7 D D S D S D S

D8H & K 7 D D S S D D SD8H 6 D S D S D SD8NC (8.00" Pitch) 7 D D S D S D S

D7E, F & G 6 D S D S D S

D7 LGP 7 D D S D S D SD7NC (8.00" Pitch) 5 S D S D S

D6C & D 6 D S D S D SD6B & D6NC 6 S D D D D SD6 LGP 7 D D S D S D SD6K 7 S S S S S S SD5C 6 S D S S D SD5 & D5B 6 S D D S D SD5 LGP 7 S D D S D D SD4G XL LGP, D5C XL LGP, D5G XLLGP 7 S D S D S D S

D4B, D4B LGP, D4C, D4C LGP 6 S D S S D S

D4D & E, LGP 5 D D S D S

D4NC 4 S D D SD3, D3 LGP, D3B, D3C 5 S D S D S

D3B LGP, D3C LGP, D3G XL LGP 6 S D S S D S

D3 Special LGP 7 D D S S D S S

D2 4 S D D S983 7 D D S D S D S973 7 S D D S D D S977E, H & K 7 D D S D S D S

977D & No. 6 7 S D D D D D S955K, L & LGP, 963 6 S D D S D S

955H 6 S D D D D S955F, E & C 5 D D S D S

953, 943 6 S D S S D S

951A 5 D S D S D951B 5 S D S D S951 LGP 5 S D S D S941 incl. LGP, 933E & F 5 D D S D S

933C, 933(2), 939 6 S D S S D S

931 incl. LGP, 935 5 S D S D S

SystemOne Track Roller Sequence:For low sprocket tractors and loaders all rollers are single flange. Rollers per side are the same as in the tableabove.

2 New design.

864

Product Information — CARRIER ROLLERSCARRIER ROLLERSFunctions

Carrier Roller Group

• Support the track as it moves between the sprocket and idler.• Guide the track between the sprocket and idler.Requirements• Strength — to resist failure before tread wear life is utilized.• Tread wear life matched to track links.• Treads and flanges rebuildable on forged shells• Most internal components reusable.• No maintenance required during tread wear life.

CARRIER ROLLER SHELLCarrier rollers have shells forged from Deep Hardening Steel for strength, wear life and rebuildability.Cat carrier rollers used Duo-Cone Seals for maintenance free operation.Features• Heat treated shells for body strength and long wear life.• Shaft and bearings designed to carry and turn with heavy track weight.• Lifetime Lubricated for minimum maintenance.NoteD8T and larger track-type tractors use a single flange track roller group as the carrier roller.

865

Product Information — IDLERS

IDLERS

IDLER ASSEMBLYFunctions• Guide the track in and out of the track rollers.• Intermittently support the machine’s weight.• Provide a way to control track slack and tension.

Requirements• Strength to resist failure before tread wear life is utilized.• Tread wear life equal to or greater than link wear life to service limits.• Treads and center flanges rebuildable.• No lubricant maintenance during original tread wear life.

Features• Tread hardness similar to links, track rollers and carrier rollers for impact strength and balanced wear life.• Lifetime Lubricated for minimum maintenance.• Rebuildable tread.

Straight Side Plate Curved Side Plate Center Tread Idler (CTI) Typical Cast/Forged Idler Cast Idler

Fabricated Idlers

IDLER TYPES

Model Type Model Type

D11R/N Cast D5G, D5C, 939 Forged

D10T/R/N Cast D5B, 225 Fabricated

D10 Cast D5N, D5M, D4H Cast & Fabricated

D9T/R/N Cast D4E, 215 Fabricated

D9L Cast D3G, D4G, D3, D4B, D4C Forged

D9H Fabricated 983 Fabricated

D8T/R/N Cast 977 Fabricated

D8L Cast 973 Fabricated

245 Cast 963 Fabricated

D8K, 245 Fabricated 955 Fabricated

D7R/H Cast & Fabricated 951 Fabricated

D7G, 235 Fabricated 953 Fabricated

D6T/R/H Fabricated 943 Fabricated

D6D, 227 Fabricated 941 Fabricated

D6N, D6M, D5H Fabricated 931, 933, 935 Forged

D6K Sprocketed All Center Tread Idlers (CTI) Cast

866

Product Information — GUARDSTRACK ROLLER GUARDSFunctions• Protect the track, rollers and sprockets from rocks and debris.• Provide some additional tracking guiding assistance.

Full Length Guard

Cat track roller guards help prevent large rocks and other high strength debrisfrom jamming and being crushed between the track rollers, track and sprockets.This crushing could accelerate wear and damage components. Caterpillar offerstwo types of roller guards — full and partial. Both bolt to the roller frame.

The full length track roller guards cover the entire roller area. With full lengthguards, track guiding guards cannot be used. Full length track roller guards havebolt-on wear strips. See CTS Handbook for usage information. Partial Length Guard

Partial length track roller guards are designed to be used with end guidingguards. They protect the roller area while allowing the use of end guiding guards.See CTS Handbook for usage information.

TRACK GUIDING GUARDSCaterpillar offers three types of track guiding guards — end guiding guards,center guiding guards, and full length guiding guards.Function

• Help align and guide the track in and out of the idler and the sprocket andthrough the rollers.

End Guiding Guard

End Guiding Guard

• Located at the front and rear of the track roller frame.• Helps guide the track as it enters and leaves the sprocket and idler.• Prevents link gouging by the sprocket during turning and sidehill operations.Segmented (Center) Guiding Guard

Segmented (Center) Guiding Guard

• Located in the middle of the track roller frame.• Maintains track alignment.• Reduces link scuffing with other undercarriage components.• Allows packing material to fall free.Full Length Guiding Guard

Bolt-on Wear Strip

• Covers entire roller area.• Maintains track alignment.Cast Guards (Center and Full Length)

• Strength.• Better pin coverage.Cat track guiding guards have heat treated bolt-on wear strips. They can easilybe replaced to restore the worn surface without changing the entire guardassembly. Full Length Guiding Guard

867

Product Information — PROPER TRACK SAGPROPER TRACK SAG – MACHINES WITHOUT CARRIER ROLLERSModel Inches mmD11R, D11N, D10 6.5" ± .40" (165 mm ± 10 mm)D10T, D10R, D10N, D9L, 589 6.1" ± .40" (155 mm ± 10 mm)D9T, D9R, D9N 5.1" ± .40" (130 mm ± 10 mm)D8T, D8R, D8N, 578, 583 T/R 4.5" ± .40" (115 mm ± 10 mm)D8L 5.5" ± .40" (140 mm ± 10 mm)D7R, D7H LGP, 527R 5.0" ± .40" (127 mm ± 10 mm)D7R, D7H, D6T, D6R, D6H, 527 4.5" ± .40" (115 mm ± 10 mm)517, D5H, D4H, 561M/H 3.9" ± .40" (100 mm ± 10 mm)

PROPER TRACK SAG – MACHINES WITH CARRIER ROLLERSModel Inches mmD11R, D11N, D10 3.0" ± .40" (75 mm ± 10 mm)D10T, D10R, D10N, D9L, 589 2.8" ± .40" (70 mm ± 10 mm)D9T, D9R, D9N 2.6" ± .40" (65 mm ± 10 mm)D8T, D8R, D8N, 578, 583T/R 2.6" ± .40" (65 mm ± 10 mm)D8L 2.6" ± .40" (65 mm ± 10 mm)D7R, D7H, D7R/D7H LGP, 572R 2.6" ± .40" (65 mm ± 10 mm)D6T, D6R, D6H, 527 2.2" ± .40" (55 mm ± 10 mm)D6N, D6M, D5H, D6N/D6M/D5H LGP, 517 2.2" ± .40" (55 mm ± 10 mm)D5N, D5M, D4H, 561M/H 1.4" ± .40" (35 mm ± 10 mm)

PROPER TRACK SAG – HYDRAULIC EXCAVATORS

Model MinInchesTarget Max Min

mmTarget Max

All 200-Family series excavators 1.0 1.3 1.5 25.0 32.5 40.0All E-Family series excavators 1.6 1.85 2.1 40.0 47.5 55.0All 300-Family series excavators 1.6 1.85 2.1 40.0 47.5 55.05080, 5090B, 5130, 5130B, 5110B 1.6 1.85 2.1 40.0 47.5 55.0

PROPER TRACK SAG –SystemOne MACHINES WITH CARRIER ROLLERS*

Model MinInchesTarget Max Min

mmTarget Max

D6T/R/H, D6N/M, D5H 1.6 1.80 2.0 40 45 50D5N/M, D4H 1.0 1.40 1.8 25 35 45* If excessive track jumping occurs, run the track adjustment to the minimum side of track sag range, and/or change or upgrade to new recoilspring.

868

Product Information — TRACK ROLLER FRAME EXTENSIONTrack Roller Frame Extension SpecificationsMachines with and without carrier rollers Maximum Length of Exposed Tube

Model (Serial Number Range) Inches mmD11R (AAF) (7PZ) (9TR00202-UP) (9XR00154-UP) 7.8" (198 mm)

D11R, D11N 7.0" (178 mm)

D10T (RJG), D10R (AKT) (3KR) 7.6" (194 mm)

D10N (2YD1-515), D10 (84W) (76X) 5.8" (148 mm)

D10R (3SK), D10N (2YD516-UP) 6.8" (173 mm)

D9T (RJS), D9R (ACL) (ABK) (8BL1422-UP) (7TL1212-UP) 7.0" (178 mm)

D9R (8BL1-1421) (7TL1-1211), D9N) 5.9" (150 mm)

D9L, D8L, 589 6.5" (165 mm)

D8R (7XM1-5093), D8N (9TC) (5TJ) 5.6" (142 mm)

D8T D8R, 583T/R (7XM5094-UP) (6YZ) (KPZ) 6.0" (152 mm)

D8N, 578 (9TC) (5TC) 5.6" (142 mm)

D7R - STD, XR 5.4" (136.5 mm)

D7R - LGP 572R 5.4" (136.5 mm)

D7H - STD, XR 5.0" (127 mm)

D7H - LGP 5.0" (127 mm)

D6T - STD 5.8" (147.5 mm)

D6T - XL/XW/IG 5.7" (144.2 mm)

D6T - LGP 5.6" (142.5 mm)

D6R - STD (2YN1-544) (3ZN1-763) 6.2" (156.8 mm)

D6R - STD (2YN545 & UP) (3ZN764 & UP) (AFM) (AEM) 5.8" (147.5 mm)

D6R - XR (6JN1-415) (7KN1-450) 6.2" (156.8 mm)

D6R - XR (6JN416 & UP) (7KN451 & UP) 5.8" (147.5 mm)

D6R - LGP (8LN1-528) (9PN1-1578) 6.0" (151.8 mm)

D6R - LGP (8LN529 & UP) (9PN1579 & UP) (ACJ) (ADE) 5.6" (142.5 mm)

D6R - XL (4MN1-503) (5LN1-2765) 6.0" (153.5 mm)

D6R - XL (4MN504 & UP) (5LN2766 & UP) 5.7" (144.2 mm)

D6R - XW 5.7" (144.2 mm)

D6H - STD, XR 6.4" (161.8 mm)

D6H - LGP, 527 6.2" (156.8 mm)

D6H - XL 6.0" (153.5 mm)

D6M/N - XL 4.0" (102.4 mm)

D6M/N - LGP 4.3" (108.2 mm)

D5M/N - XL 3.6" (91.7 mm)

D5M/N - LGP 3.5" (88.5 mm)

D5H, 517 4.4" (112 mm)

D4H, 561H/M 3.9" (100 mm)

869

Conversion GuideDETERMINING COMPETITIVE UNDERCARRIAGE CONVERSIONS ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 870Conversion Guide — LINK ASSEMBLY ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 871

LINK ASSEMBLY .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 871Conversion Guide — TRACK SHOE .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 874

TRACK SHOE .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 874Conversion Guide — SPROCKET .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 875

SPROCKET .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 875OTHER CONSIDERATIONS... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 876

Conversion Guide — TRACK ROLLERS ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 877TRACK ROLLERS .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 877

Conversion Guide — CARRIER ROLLERS.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 879CARRIER ROLLERS.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 879PRIMARY DIMENSIONS ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 879OTHER CONSIDERATIONS... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 879

Conversion Guide — IDLERS .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 880IDLER.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 880PRIMARY DIMENSIONS ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 880OTHER CONSIDERATIONS... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 880

870

DETERMINING COMPETITIVE UNDERCARRIAGE CONVERSIONSTo identify which Cat components can be used, and if modifications are required, to convert any track type machineto Cat undercarriage components, refer to the following guidelines:

• Refer to guidelines on the following pages to determine what dimensions should be collected on the competitivemachine to make a complete or partial conversion to Cat undercarriage.

• Use Conversion Report Form/Work Sheet PEEP0210, to collect dimensional data.• Refer to IRM UC96-12, titled "Cat Undercarriage Components Dimension Guide". This guide provides information tocompare the dimensions of the competitive undercarriage with Cat undercarriage components for conversionpurposes.

871

Conversion Guide — LINK ASSEMBLYLINK ASSEMBLYPrimary Dimensions

Pitch — ABushing O.D. — BRail SpreadInside — COutside — D

Secondary DimensionsLink Height — EPin Length — FRail to Pin Boss — GRail to Bushing — HBolt Size — I

Other ConsiderationsNumber of Sections

PRIMARY DIMENSIONSThe primary dimensions are the critical dimensions to determine if a Cat link assembly can be used with the OEMsprocket and/or OEM rolling components. Compare measurements to Cat link assembly dimensions, refer to IRMUC96-12. If measurements are within the ranges shown then the Cat link assembly may be used with the OEMsprocket and/or rollers. If measurements and Cat link dimensions are different, or conversion to Cat sprockets and/or rollers is desired, sprocket and/or roller measurements must also be taken.

Pitch — APurpose: Determines OEM sprocket compatibility with Cat track.Range: ± .03" (.76 mm)Method: Track pitch (A) is the distance between pin centers in adjacent

track sections. Track pitch can be determined by measuring the dis-tance from one side of the pin to the same side of the pin in the ad-jacent section. When measuring to determine OEM pitch on wornlink assemblies, you will need to adjust for an increase in trackpitch due to internal wear.

872

Conversion Guide — LINK ASSEMBLYLINK ASSEMBLY (Cont'd.)Bushing Outer Diameter (O.D.) — BPurpose: Determines OEM sprocket compatibility with Cat track.Range: - .12" (3.04 mm) without modifications

± .12" (3.04 mm) with modifications

Method: The bushing outer diameter measurement should be taken across theunworn horizontal centerline of the bushing. In cases where the com-petitive track bushing is of smaller diameter than the Cat track bush-ing, and where the competitive sprocket must be used, the newcompetitive sprocket root should be ground out to properly accommo-date the larger diameter bushing. This grinding should be done withthe sprocket held in a fixture to achieve uniform profile and pitch. Fail-ure to grind out the difference in radius can result in mismatch andaccelerated bushing wear. Normal break-in cannot be expected to re-lieve the difference without some detrimental wear.

Rail SpreadInside — COutside — D

Purpose: Determines OEM rolling component compatibility with Cat track.Range: Inner — .0" to + .19" (4.83 mm)

Outer — -.19" (4.83 mm) to + .0"Method: The inside and outside rail spreads can be measured as shown at

below.Note: As link assemblies wear, there will be a slight change of railspread. It does not significantly affect measured dimensions.

873

Conversion Guide — LINK ASSEMBLYLINK ASSEMBLY (Cont'd.)SECONDARY DIMENSIONSThe secondary dimensions are less critical. Although they rarely prevent a conversion, modifications may be neces-sary in order to protect a complete Cat undercarriage system.

Link Height — EPurpose: Determines if machine height will be raised or lowered and affects number of sections required.Pin Length — FPurpose: Determines if pin will clear guards or other machine parts.Rail to Pin Boss — GPurpose: Determines material available for wear.Rail to Bushing — HPurpose: Determines if link will clear idler, roller flanges, and provide maximum wear material without sacrificing

guidability, number of sections required.Bolt Size — IPurpose: Bolt sizes need to be equivalent to ensure use of competitive shoe and proper fastener strength.

OTHER CONSIDERATIONSNumber of SectionsThe number of Cat track sections required should be determined from the number used on the competitive machineat the time of conversion.Assuming the sprockets and rolling components maintain relatively constant placement and sizes, the followingprocedure is usually accurate enough to determine the number of Cat sections required.

No. Sections of Cat =OEM Pitch (New) x No. Sections Currently

Cat PitchExample: Calculations for converting a competitive 7.50" pitch 36-section machine to Cat 8.00" pitch track are asfollows:7.50" x 36 = 270 total inches of chain required on this machine. 270" 8.00" or 33.75 or 34 sections of Cat 8.00" pitchtrack required for conversion.If link height and/or rail to pin boss clearance increases a large amount, the preceding formula may lead to a linkassembly that is too short.

874

Conversion Guide — TRACK SHOETRACK SHOEPrimary Dimensions

Bolt Hole Spacing — A— B— C

Bolt Size — D

Bolt Hole Spacing — A, B, CPurpose: Determines interchangeability of track shoes.Range: .0"Method: There are two methods of measuring shoe bolt spacing:

1. Measure a track shoe, by measuring from one side of a bolt hole to the same point of the holeadjacent2. Measure an assembled track group, by measuring from the center of the bolt head to the center ofthe adjacent bolt

Bolt Size — DPurpose: Determines reuse of track shoes and/or track hardware.Range: .0"

Other ConsiderationsThe shoe leading and trailing edges must maintain proper clearance, especially if link pitch changes, to allow prop-er assembly and operation.

875

Conversion Guide — SPROCKETSPROCKETPrimary Dimensions

Tip Diameter — ARoot Diameter — BInner Diameter — C

Other ConsiderationsOffsetSegment Hardware

PRIMARY DIMENSIONSUse these dimensions to determine if a Cat sprocket can be used on the competitive machine.Tip Diameter — APurpose: Determines if machine interference will result from using Cat

sprocket.Range: Not SpecifiedMethod: Measure the overall diameter of the sprocket. It may be helpful to

mark the center of the hub or axle. Then, using a 12" ruler extendedfrom the tooth tip measure to the hub center with a tape measure.The most accurate sprocket measurements can be obtained afterthe track has been removed from the machine. Either too large ortoo small tip diameter can result in track or sprocket interferencewith other machine components.

Root Diameter — BPurpose: Determines if sprocket will carry machine weight.Range: Not SpecifiedMethod: Measure the diameter of the (estimated) unworn sprocket roots. The track bushings must increase ele-

vation such that at the six o’clock sprocket position the bushing is above the level that it left the lastroller.It may be necessary to use spacer plates on the competitive track roller frame to increase groundclearance when using a larger diameter Cat sprocket. This should lift the track roller frame at the bot-tom entry position. Spacers may be fabricated from 1030 or 1020 steel. Full length spacer plates arerecommended and bolts should be checked for tightness at regular intervals.

Inner Diameter — CPurpose: Determines if there is adequate space and geometry for welding.Range: Not SpecifiedMethod: Measure the area that will facilitate welding. Use same procedure described above.

876

Conversion Guide — SPROCKETOTHER CONSIDERATIONSOffsetThe Cat rim or adapter ring and segments may have a different offset than the OEM design. Failure to compensatefor the offset will result in sprocket-link interference.Whether you use an adapter ring or a weld-on rim, the inner diameter must allow proper mounting and orientationon the competitive sprocket “hub.”When welding, the sprocket teeth must be in line with the track roller center line and the rim or segments must beclear of all other parts.

Segment HardwareAny additional clearances needed for segment hardware must be considered, especially if the sprocket runs closeto final drive housings, guards, etc.

877

Conversion Guide — TRACK ROLLERSTRACK ROLLERSPrimary Dimensions

Tread Diameter — ATread

Inside — COutside — D

Mounting Width — ERoller Frame to Tread Surface — IWidth Between Bolt Centers — FBolt Hole Spacing — H

Other ConsiderationsFlange Diameter — BBolt Size — GRoller Spacing

PRIMARY DIMENSIONSUse these dimensions to determine if Cat link assemblies will fit on the competitive track rollers.Tread

Inside — COutside — D

Purpose: Determines Cat link assembly compatibility with OEM track rollers.Range: Outside — .0" to + .19" (4.83 mm)

Inside — .19" (4.83 mm) to + .0"Method: Measure from inside flange to inside flange and outside flange to out-

side flange. Measurements from worn rollers will result in slightly inac-curate dimensions. If clearances appear to be close compensation forwear may be needed. Note: Be sure to compare these measurementsto the link assembly intended for use in the conversion.

Use these dimensions to determine if Cat track rollers can be used on the competitive machine.Mounting Width — EPurpose: Determines if Cat rollers will fit in OEM frame.Range: - .10" (2.54 mm) to + .0" (.0 mm)Method: Measure the OEM track roller frame and compare to Dimension E on

the Cat roller.Note: Failure to maintain a clearance between the roller frame androller end collar vertical faces may cause roller damage.

Roller Frame to Tread Surface — IPurpose: Determines if Cat roller lowers or raises machine.Range: Depends on roller wear limits, idler and sprocket placement.

878

Conversion Guide — TRACK ROLLERSTRACK ROLLERS (Cont'd.)Method: Differences in tread diameter or end collar design can result in

slightly raising or lowering overall height of machine. This can causetrack interference with frame, guards or cause sprocket to carrysome machine weight. Frame to tread surface (Dimension I) shouldbe measured and any potential interference compensated for asnecessary on a case by case basis. If required, roller frame spacerscan be used.

Width of Bolt Centers — FBolt Spacing — HPurpose: To determine use of existing bolt pattern.Range: ± .01" (.254 mm)Method: Measure from the center to center point of bolts in track roller

frame. For comparison, use Cat track roller dimensions as reference.If patterns are not within range, plugging, drilling, and tapping of thecompetitive roller frame may be needed.

OTHER CONSIDERATIONSFlange Outer DiameterTwo points to check are (1) roller flange to link pin boss clearance, and (2) rollerflange and track frame interference.Bolt SizeIf bolt size and tread type are similar, reuse of competitive hardware maybepossible.Roller SpacingIf the Cat roller selected has different tread, flange diameters and/or roller frame to tread surface dimensions, besure to compensate for these to prevent idler/sprocket interference, especially on the front and rear roller.Shaft and End Collar Design(flat shaft mounting vs. round shaft mounting)For example, Cat D8 and D9 size track rollers utilize a full round shaft mounting which requires a saddle type cutoutin the roller frame(Illustration B). D8 size roller conversion can use 983 rollers which do mount flat as in IllustrationA. However, D9 roller conversion will require a roller frame saddle arrangement.

879

Conversion Guide — CARRIER ROLLERSCARRIER ROLLERSPrimary Dimensions

Tread Inside — ATread Outside — BShaft Outer Diameter — CReference Dimension — D

Other ConsiderationsShaft Mounting Length — EDowelSpacingSize

PRIMARY DIMENSIONSUse these dimensions to determine if Cat link assemblies can be used on the competitive carrier roller.Tread

Inside — AOutside — B

Purpose: Determines link assembly compatibility with carrier rollers.Range: Inside — .19" (4.83 mm) to +.0"

Outside — .0" to +.19" (4.83 mm)Method: Measure from inside flange to inside flange and outside flange to outside flange. Measurements from

worn rollers will result in slightly inaccurate dimensions. If clearances appear to be close compensa-tion for wear may be needed. Note: Be sure to compare these measurements to the link assembly in-tended for use in the conversion.

Use these dimensions to determine if Cat carrier rollers can be used on the competitive machine.

Shaft Outer Diameter — CPurpose: Determines compatibility of Cat roller shaft with competitive carrier roller holder.Range: As small as competitive roller holder will hold. As large as competitive roller shafts.Method: Measure competitive shaft with calipers, compare to Cat roller; if Cat roller is smaller, a sleeve may be

fabricated to compensate for small diameter.

Reference Dimensions — DPurpose: Determines compatibility of Cat carrier roller with competitive carrier roller holder and link assembly.Range: ±.10" (2.54 mm) depends on tread inside and competitive holders.Method: Measure from radius to holder to determine reference dimension. The reference dimensions assure

proper carrier roller alignment with the link assembly.

OTHER CONSIDERATIONSShaft Mounting Length — EThe Cat carrier roller shaft may have a longer or shorter shaft mounting length, providing it does not interfere withthe holder or other components.

Dowel Spacing and SizeThe dowel spacing and size may need to be moved or resized; many times this is accomplished by drilling newholes in the competitive holder.

880

Conversion Guide — IDLERSIDLERPrimary Dimensions

Tread Diameter — ATread Inside — BTread Outside — CMounting Shaft Diameter — D

Other ConsiderationsSlide Plate Profile

PRIMARY DIMENSIONSUse these dimensions to determine if Cat link assemblies can be used on the competitive idlers.

Tread Diameter — APurpose: Determines link assembly compatibility with idler.Range: Slightly smaller than OEM up to OEM diameter.Method: Measure the diameter; compensate for wear as much as possible.

TreadInside — BOutside — C

Purpose: Determines link assembly compatibility with idler.Range: Inside — .19" (4.83 mm) to +.0"

Outside — .0" to +.19" (4.83 mm)Method: Measure from inside flange to inside flange and outside flange to outside flange. Measurements from

worn rollers will result in slightly inaccurate dimensions. If clearances appear to be close compensa-tion for wear may be needed. Note: Be sure to compare these measurements to the link assembly in-tended for use in the conversion.

Use these dimensions to determine if Cat carrier rollers can be used on the competitive machine.

Mounting Shaft — DPurpose: Determines use of OEM mounting block.Range: Same shaft O.D., same mounting arrangement.Method: Compare Cat shaft O.D., length and mounting type with competitive idler. Modification to OEM mount-

ing block may permit use of Cat idler.

OTHER CONSIDERATIONSSide Plate ProfileSome manufacturers use guards that run close to idler side plates; modification may be needed to avoidinterference.

Part Number Index

PPaarrtt..NNoo.. PPaaggee..NNoo.. PPaarrtt..NNoo.. PPaaggee..NNoo.. PPaarrtt..NNoo.. PPaaggee..NNoo.. PPaarrtt..NNoo.. PPaaggee..NNoo..

881

002-1212 ... . . . . . . . . . . 798–799006-7231 ... . . 829–830, 833–

834, 837–838006-7232 ... . . 829–830, 833–

834, 837–838006-8663 ... . . . . . . . . . . . . . . . . 795027-3873 ... . . . . . . . . . . 247, 279031-0221 . 320, 322, 421, 464031-1382 ... . . . . . . . . . . . . . . . . 199031-3185 ... . . . . . . . . . . 196–197031-6100 ... . . . . . . . . . . . . . . . . 839031-9099 ... . . . . 664, 675–676034-0707 ... . . . . . . . . . . . . . . . . 160053-2294 . 14–15, 17–18, 46,

50, 219, 229, 281,821

068-6405 ... . . . . . . . . . . 798–799085-4972 ... . . . . . . . . . . . . . . . . 735085-4973 ... . . . . . . . . . . . . . . . . 735085-5519 ... . . . . . . . . . . . . . . . . 713085-8893 ... . . . . . . . . . . 762, 770085-9311 ... . . . . . . . . . . . . . . . . 730085-9768 ... . . . . . . . . . . 775–776086-3096 ... . . . . . . . . . . . . . . . . 738086-8706 ... . . . . . . . . . . . . . . . . 824086-8710 ... . . . . . . . . . . . . . . . . 825086-8712 ... . . . . . . . . . . . . . . . . 824086-9627 ... . . . . . . . . . . . . . . . . 822086-9722 ... . . . . . . . . . . . . . . . . 822086-9723 ... . . . . . . . . . . . . . . . . 822087-8805 ... . . . . . . . . . . . . . . . . 727087-8806 ... . . . . . . . . . . . . . . . . 727093-0036 ... . . . . . . . . . . 711, 782093-0037 ... . . . . . . . . . . . . . . . . 542093-0042 ... . . . . . . . . . . . . . . . . 722093-0043 ... . . . . 728–729, 732093-0044 ... . . . . . . . . . . . . . . . . 737093-0045 ... . . . . . . . . . . . . . . . . 740093-0233 ... . . . . . . . . . . . . . . . . 739093-0245 ... . . . . . . . . . . . . . . . . 736093-0259 ... . . . 715–716, 720,

723, 731093-0261 ... . . . . 715–716, 720093-0262 ... . . . . . . . . . . . . . . . . 722093-0264 ... . . . . . . . . . . . . . . . . 722093-0265 ... . . . . . . . . . . . . . . . . 732093-0266 ... . . . . 728–729, 733093-0268 ... . . . . . . . . . . . . . . . . 737093-0271 ... . . . . . . . . . . . . . . . . 740093-0319 ... . . . . . . . . . . . . . . . . 720093-0320 ... . . . . . . . . . . . . . . . . 722093-0321 .728–729, 732–733093-0323 ... . . . . . . . . . . . . . . . . 740093-0394 ... . . . . . . . . . . . . . . . . 739

093-0502 .. . . . . . 728–729, 732093-0509 .. . . . . . . . . . . . . . . . . . 722093-0510 .. . . . . . . . . . . . . . . . . . 737093-0515 .. . . . . . . . . . . . 711, 782093-0517 .. . . . . . . . . . . . 711, 782093-0521 .. . . . . . . . . . . . . . . . . . 722093-0522 .. . . . . . 728–729, 732093-0523 .. . . . . . . . . . . . . . . . . . 737093-0524 .. . . . . . . . . . . . . . . . . . 740093-1364 .. . . . . . 785–786, 819093-1413 . 723, 730, 734–735093-1414 . 713, 785–786, 819093-1415 .. . . . . . . . . . . . . . . . . . 712093-1416 .. . . . . . . . . . . . 738, 741093-1418 .. . . . . . . . . . . . 734, 738093-1420 .. . . . . . . . . . . . . . . . . . 741093-1693 .. . . . . . . . . . . . 723, 730093-1694 .. . . . . . . . . . . . . . . . . . 734093-1697 .. . . . . . . . . . . . . . . . . . 717093-1701 .. . . . . . . . . . . . . . . . . . 712093-1736 .. . . . . . . . . . . . . . . . . . 735093-1837 .. . . . . . . . . . . . . . . . . . 721093-1839 .. . . . . . . . . . . . . . . . . . 712093-1841 .. . . . . . . . . . . . . . . . . . 735093-1843 .. . . . . . . . . . . . . . . . . . 734093-1844 .. . . . . . 717, 719, 721093-1845 .. . . . . . . . . . . . . . . . . . 723093-1848 .. . . . . . . . . . . . . . . . . . 730093-1849 .. . . . . . . . . . . . 723, 731093-1887 .. . . . . . . . . . . . . . . . . . 541093-1890 .. . . . . . . . . . . . . . . . . . 722093-1891 .. . . . . . . . . . . . . . . . . . 722093-1892 .. . . . . . . . . . . . . . . . . . 737093-1893 .. . . . . . . . . . . . . . . . . . 737093-1894 .. . . . . . . . . . . . . . . . . . 740093-1895 .. . . . . . . . . . . . . . . . . . 740093-1927 .. . . . . . . . . . . . . . . . . . 722093-1935 .. . . . . . . . . . . . . . . . . . 711093-1946 .. . . . . . . . . . . . . . . . . . 722093-1947 .. . . . . . . . . . . . . . . . . . 722093-1949 .. . . . . . . . . . . . . . . . . . 733093-1950 .. . . . . . . . . . . . . . . . . . 733093-1951 .. . . . . . . . . . . . . . . . . . 733093-1952 .. . . . . . . . . . . . . . . . . . 733093-1969 .. . . . . . . . . . . . 711, 781093-1970 .. . . . . . . . . . . . 711, 781093-1979 .. . . . . . . . . . . . . . . . . . 722093-1980 .. . . . . . 728–729, 732093-1981 .. . . . . . 728–729, 732093-1985 .. . . . . . . . . . . . . . . . . . 740093-1999 .. . . . . . . . . . . . . . . . . . 722093-2000 .. . . . . . . . . . . . . . . . . . 722093-2011 .. . . . . . . . . . . . . . . . . . 740093-2012 .. . . . . . . . . . . . . . . . . . 740

093-2027 .. . . . . . . . . . . . . . . . . . 713093-4333 .. . . . . . . . . . . . . . . . . . 712093-6937 .. . . . . . . . . . . . . . . . . . 721093-6946 .. . . . . . . . . . . . 718, 721093-8747 .. . . . . . . . . . . . 719, 721093-9275 .. . . . . . . . . . . . . . . . . . 730093-9871 .. . . . . . . . . . . . . . . . . . 734093-9886 .. . . . . . . . . . . . 735–736094-0548 .. . . . . . . . . . . . 723, 730094-0563 . 723, 730, 734–735094-1384 .. . . . . . . . . . . . . . . . . . 730094-1388 .. . . . . . . . . . . . 723, 731094-1782 .. . . . . . . . . . . . . . . . . . 731094-2491 .. . . . . . . . . . . . . . . . . . 734094-2576 .. . . . . . . . . . . . . . . . . . 734094-3709 .. . . . . . 601, 611, 615094-4829 .. . . . . . . . . . . . . . . . . . 741094-4846 .. . . . . . . . . . . . . . . . . . 740094-6105 .. . . . . . . . . . . . . . . . . . 738094-6133 .. . . . . . . . . . . . . . . . . . 737094-6386 .. . . . . . . . . . . . . . . . . . 730094-6391 .. . . . . . . . . . . . . . . . . . 735095-0818 .. . . . . . . . . . . . . . . . . . 712095-0819 .. . . . . . . . . . . . 724, 731095-0820 .. . . . . . . . . . . . . . . . . . 736095-0863 .. . . . . 537, 540–542,

546–547, 550–551,554–556, 559–560,715, 720, 725, 727

095-0867 .. . . . . . . . . . . . 732, 737095-0894 .. . . . . . . . . . . . . . . . . . 785095-0928 .. . . . . . 723, 730, 735095-0966 . 713, 718–719, 721095-0967 .. . . . . 723, 726, 731,

735–736, 738095-0990 .. . . . . . . . . . . . . . . . . . 776095-1279 .. . . . . . . . . . . . 777, 787095-1533 .. . . . . . . . . . . . . . . . . . 713095-1541 .. . . . . . 712, 777, 787095-1545 .. . . . . . 717, 719, 721095-1549 .. . . . . . . . . . . . 723, 730095-1551 .. . . . . . . . . . . . . . . . . . 734095-1553 .. . . . . . . . . . . . . . . . . . 738095-1557 .. . . . . . . . . . . . . . . . . . 741095-1578 .. . . . . . . . . . . . . . . . . . 736095-1595 .. . . . . . . . . . . . . . . . . . 768095-1600 .. . . . 712, 776, 785–

786, 819095-1657 .. . . . . . . . . . . . . . . . . . 770095-1658 .. . . . . . . . . . . . 712–713095-1659 . 713, 788–789, 819095-1662 .. . . . . . . . . . . . 544, 717095-1663 .. . . . . 713, 723, 726,

730, 735

095-1673 .. . . . . . . . . . . . . . . . . . 741095-1674 .. . . . . . . . . . . . 738, 741095-1681 .. . . . . . . . . . . . . . . . . . 718095-7099 .. . . . . . . . . . . . 723, 731095-7100 .. . . . . . . . . . . . . . . . . . 717095-7119 .. . . . . . 728–729, 732095-7120 .. . . . . . 728–729, 732095-7123 .. . . . . . . . . . . . . . . . . . 729095-7130 .. . . . . . . . . . . . . . . . . . 722095-7138 .. . . . . . . . . . . . 723, 730095-7412 .. . . . . . . . . . . . . . . . . . 722095-7944 .. . . . 567, 576, 584–

586, 596–597095-7962 .. . . . . . . . . . . . . . . . . . 768095-9779 .. . . . . . . . . . . . . . . . . . 730096-0094 .. . . . . . . . . . . . . . . . . . 732096-0231 .. . . . . . 543, 716, 720096-0240 .. . . . . . . . . . . . 543, 716096-0241 .. . . . . . . . . . . . . . . . . . 732096-0244 .. . . . . . . . . . . . . . . . . . 732096-0251 .. . . . . . . . . . . . . . . . . . 741096-0253 .. . . . . . . . . . . . . . . . . . 734096-0257 .. . . . . . . . . . . . . . . . . . 733096-0263 .. . . . . . . . . . . . . . . . . . 732096-0264 .. . . . . . . . . . . . . . . . . . 732096-0305 .. . . . . . . . . . . . . . . . . . 741096-0330 .. . . . . . . . . . . . . . . . . . 734096-0551 .. . . . . . . . . . . . 728–729096-0586 .. . . . . . . . . . . . . . . . . . 737096-0655 .. . . . . . . . . . . . 719, 721096-0883 . 721, 723, 730, 735096-1043 .. . . . . . . . . . . . . . . . . . 720096-1479 .. . . . . . . . . . . . . . . . . . 717096-2052 .. . . . . . . . . . . . 724, 731096-2142 .. . . . . . . . . . . . 711, 781096-2143 .. . . . . . . . . . . . 711, 781096-2144 .. . . . . . . . . . . . 711–712096-4280 .. . . . . . . . . . . . . . . . . . 726096-4327 .. . . . . . . . . . . . . . . . . . 725096-4883 .. . . . . . . . . . . . 769, 771096-5251 .. . . . . . . . . . . . . . . . . . 729096-5256 .. . . . . . 728–729, 732096-5259 .. . . . . . 728–729, 732096-5260 .. . . . . . 723, 730, 735096-6783 .. . . . . . . . . . . . . . . . . . 819096-7011 .. . . . . . . . . . . . . . . . . . 737096-7033 . 711, 780–782, 818096-7698 .. . . . . . . . . . . . . . . . . . 721096-8047 .. . . . . . . . . . . . . . . . . . 720096-9296 .. . . . . . . . . . . . . . . . . . 762096-9944 .. . . . . . . . . . . . . . . . . . 737096-9945 .. . . . . . . . . . . . . . . . . . 737096-9946 .. . . . . . . . . . . . . . . . . . 737096-9947 .. . . . . . . . . . . . . . . . . . 737

882

Part Number Index

PPaarrtt NNoo.. PPaaggee NNoo.. PPaarrtt NNoo.. PPaaggee NNoo.. PPaarrtt NNoo.. PPaaggee NNoo.. PPaarrtt NNoo.. PPaaggee NNoo..

096-9988 .. . . . . . . . . . . . 763–764099-0156 .. . . . . . . . . . . . . . . . . . 717099-0157 .. . . . . . . . . . . . 544, 717099-0159 .. . . . . . . . . . . . 544, 717099-0160 .. . . . . . . . . . . . . . . . . . 544099-0163 .. . . . . . . . . . . . . . . . . . 544099-0182 .. . . . . . . . . . . . . . . . . . 718099-0183 .. . . . . . . . . . . . . . . . . . 718099-0185 .. . . . . . . . . . . . . . . . . . 718099-0187 .. . . . . . . . . . . . . . . . . . 718099-0194 .. . . . . . . . . . . . 545, 785099-0195 .. . . . . . . . . . . . 545, 718099-0219 .. . . . . . . . . . . . . . . . . . 716099-0653 . 540–542, 715, 720099-1460 .. . . . . . . . . . . . . . . . . . 726099-1461 .. . . . . . . . . . . . . . . . . . 726099-2658 .. . . . . . . . . . . . . . . . . . 732099-2668 .. . . . . . . . . . . . 724, 731099-3220 .. . . . . . . . . . . . . . . . . . 717099-4129 .. . . . . . . . . . . . . . . . . . 733099-4150 .. . . . . . . . . . . . . . . . . . 736099-4329 .. . . . . . . . . . . . . . . . . . 714099-4347 .. . . . . . . . . . . . . . . . . . 719099-5200 .. . . . . . . . . . . . . . . . . . 741099-5554 .. . . . . . . . . . . . . . . . . . 732099-5996 .. . . . . . . . . . . . . . . . . . 732099-5998 .. . . . . . . . . . . . . . . . . . 732099-5999 .. . . . . . . . . . . . . . . . . . 732099-6008 .. . . . . . . . . . . . . . . . . . 732099-6461 .. . . . . . 712, 777, 787099-6462 .. . . . . . . . . . . . 777, 787099-6463 .. . . . . . 712, 777, 787099-7241 .. . . . . . . . . . . . 735–7360L-1169 .. 641–642, 648, 654,

661–662, 6730L-1351 ... .19, 250, 282, 318,

403, 411, 420, 424,640, 647, 653, 660,671, 827, 830, 834,

8380L-1714 ... . . . . . . . . . . . . . . . . . . 3560S-0509. .. . . . . . . . . . . . . . . . . . . 6610S-1566. .. . . . . . . 480, 516–5170S-1585. . 155, 190, 252–254,

378, 381–382, 404,520, 527, 663, 706,

8250S-1587. . 348–349, 390–391,

459, 522, 706, 7090S-1588. . 316–318, 329–330,

348, 419, 430, 458,670, 693

0S-1589. .. . . . . . . 479–480, 7100S-1592. .. 369, 523, 699, 7100S-1594. .. .21, 53, 79, 81, 83,

85, 90, 152, 206,

211, 220, 228, 232,283, 321, 331, 349–350, 365, 379–380,412, 425, 431, 443,445, 460, 473–474,477, 511–513, 520–521, 671, 681, 694–

695, 7070S-1595. . 131, 154, 169, 176,

185, 267–268, 495,675, 696

0S-1621. .. . . . . . . . . . . . . . . . . . . 1620S-1625. .. . . . . . . . . . . . . 664, 6750S-1973. .. . . . . . . 383–384, 5230S-2318. .. . . . . . . . . . . . . 369, 5160T-0319 ... . . . . . . . . . . . . . . . . . . 6700T-0320 ... 118, 120, 126–1280T-0329 ... . . . . . . . . . . . . 152, 5210T-0772 ...316–317, 418–4190V-0375... . . . . . . . . . . . . 335, 356100-3205 .. . . . . . . . . . . . . . . . . . 634101-2160 .. . . . . . . . . . . . 621, 626101-2162 .. . . . . . . . . . . . . . . . . . 621101-7398 .. . . . . . . . . . . . . . . . . . 760101-7402 .. . . . . . 760, 763, 767101-7404 .. . . . . . . . . . . . 762–763102-3585 .. . . . . . . . . . . . 277, 409102-3587 .. . . . . . . . . . . . 277, 409102-5920 .. . . . . . . . . . . . 272, 406102-5921 .. . . . . . . . . . . . 272, 406102-6680 .. . . . . . . . . . . . . . . . . . 174102-6683 .. . . . . . . . . . . . . . . . . . 189102-6685 .. . . . . . . . . . . . . . . . . . 160102-8072 .. . . . . . . . . . . . 711, 782102-8073 .. . . . . . . . . . . . 711, 782102-8077 .. . . . . . 711, 781–782102-8079 .. . . . . . . . . . . . 777, 787102-8082 .. . . . . . 785–786, 818102-8084 .. . . . . . 785–786, 818102-8107 .. . . . . . . . . . . . 711, 782102-8108 .. . . . . . . . . . . . 711, 782102-8115 .. . . . . . 788–789, 819102-8116 .. . . . . . 788–789, 819102-8134 .. . . . . . 547, 551, 557102-8150 .. . . . . . . . . . . . . . . . . . 783102-8151 .. . . . . . . . . . . . . . . . . . 726102-9920 .. . . . . . . . . . . . . . . . . . 270104-3494 .. . . . . . . . . . . . . . . . . . 169104-4122 .. . . . . . . . . . . . 405–406104-4129 .. . . . . . . . . . . . . . . . . . 406104-4130 .. . . . . . . . . . . . . . . . . . 406104-8170 .. . . . . . . . . . . . . . . . . . 723104-8576 .. . . . . . . . . . . . . . . . . . 169104-8577 .. . . . . . . . . . . . . . . . . . 169105-0929 .. . . . . . . . . . . . 294, 414105-0930 .. . . . . . . . . . . . 294, 414

105-3484 .. . . . . . . . . . . . . . . . . . 761105-4125 .. . . . . . . . . . . . . . . . . . 288105-5013 .. . . . . . . . . . . . . . . . . . 820105-6203 .. . . . . . . . . . . . . . . . . . 621105-6324 .. . . . . . 605–606, 613105-8884 .. . . . . . . . . . . . 829, 833106-0458 .. . . . . . . . . . . . . . . . . . 705106-0614 .. . . . . . . . . . . . 561, 576106-0615 .. . . . . . . . . . . . 561, 576106-0616 .. . . . . . . . . . . . 561, 576106-1602 .. . . . . . . . . . . . . . . . . . . .42106-1603 .. . . . . . . . . . . . . . . . . . . .42106-1604 .. . . . . . . .42, 227, 302106-1605 .. . . . . . . . . . . . . . . . . . . .42106-1607 .. .42, 205, 227, 302106-1608 .. . . . . . . . . . . . . .41, 227106-1609 .. . . . . . . . . . . . . . . . . . 228106-1610 .. . . . . . . .41, 205, 226106-1611 .. . . . . . . . . . . . . . . . . . . .42106-1612 .. . . . . . . .42, 227, 302106-1613 .. .42, 205, 227, 302106-1615 .. . . . . . . . . . . . . . . . . . . .42106-1616 .. . . . . . . . . . . . . . . . . . . .42106-1617 .. . . . . . . . . . . . . .41, 227106-1618 .. . 33, 35, 204, 224,

302, 435, 561, 744106-1622 .. . . . . . . . . . . . . .43, 205106-1624 .. . . . . . . . . . . . . .43, 205106-1625 .. . . .33–34, 40, 204,

224, 226, 302, 435,561, 744

106-1626 .. . . .33–34, 40, 204,224, 226, 302, 435,

561, 744106-1627 .. . . .33–36, 40, 204,

224, 226, 301, 435–436, 561, 744

106-1628 .. . . .33–36, 40, 204,224, 226, 301, 435–

436, 561, 744106-1629 .. . . .33–34, 40, 204,

224, 226, 302, 435,561, 744

106-1630 .. . . .33–34, 40, 204,224, 226, 302, 435,

561, 744106-1634 .. . . . . . . . . . . . . . . 32–33106-1635 .. . . . . . . . . 34–35, 435106-1636 .. . . . . .32–34, 40–41106-1637 .. . . . . . . . . . . . . . . 34–35106-1638 . 204–205, 224, 226106-1642 .. . . . . 33, 35–37, 41,

204–205, 224, 226,302, 435–436, 561,

744106-1646 .. . . . . . . . . . . . . . . . . . . .34

106-4370 ... . . . . . . . 53–54, 234106-4371 ... . . . . . . . 53–54, 234106-4372 ... . . . . . 55, 233–234106-4373 ... . . . . . 55, 233–234106-4402 ... . . . . . 55, 233–234106-7691 ... . . . 74, 77, 79–86,

206, 211, 228106-8235 ... . . . . . . . . . . . .69, 210106-8237 ... . . . . . .69, 210, 679106-9187 ... . . . . 247–248, 402106-9563 ... . . . . . . . . . . . . . . . . . .57106-9564 ... . . . . . . . . . . . . . . . . . .57106-9982 ... . . . . . . . . . . . .60, 235107-0356 ... . . . . . . . . . . . . . . . . 633107-0669 ... . . . . . . . . . . . . . . . . 619107-0707 ... . . . . . . . . . . . . . . . . 227107-0708 ... . . . . . . . . . . . . . . . . 227107-0709 ... . . . . . . . . . . . . . . . . 227107-0710 ... . . . . . . . . . . . . . . . . 227107-0713 ... . . . . . . . . . . . . . . . . . .41107-0714 ... . . . . . . . . . . . . . . . . . .41107-0715 ... . . . . . . . . . . . . . . . . . .42107-0716 ... . . . . . . . . . . . . . . . . . .42107-0717 ... . . . . . . . . . . . . . . . . . .33107-0718 ... . . . . . . . . . . . . . . . . . .33107-0719 ... . . . 33, 35–37, 41,

204–205, 224, 226,302, 435–436, 561,

744107-0720 ... . . . . . .41, 205, 226107-1036 ... . . . . . . . . . . . . . . . . 634107-2631 ... . . . . . . . . . . . . . . . . 233107-2632 ... . . . . . . . . . . . . . . . . 233107-2644 ... . . . . 207, 221, 234107-2645 ... . . . . 207, 221, 234107-3944 ... . . . . . . . . . . . . . . . . 169107-3945 ..74, 78, 81, 83, 85,

117–120, 125–126,152, 161, 169, 211,

307107-3946 ... . . 144, 146, 148–

150, 160, 167107-3947 ... . . 144, 146, 148–

150, 160, 167, 185107-3953 ... . . . . 618, 620, 625107-4057 ... . . . 145–150, 160,

167–168, 186, 491107-4888 ... . . . . . . . . . . 147, 491107-4889 ... . . . 117–124, 153,

162, 168–169107-5715 ... . . . . . . . . . . . . . . . . . .57107-5716 ... . . . . . . . . . . . . . . . . . .57107-5721 ... . . . . . . . . . . . .60, 235107-8040 ... . . . . . . . . . . . . . . . . 167107-8084 ... . . . . . . . . . . 152, 161107-8085 ... . . . . . . . . . . 152, 161

Part Number Index


883

107-9616 ... . . . . . . . . . . . . . . . . 185107-9620 ... . . . . . . . . . . 182, 184108-0041 ... . . . . . . . . . . 126–128108-0809 ... . . . . . . . . . . . . . 56–58108-0812 ... . . . . . . . . . . . . . . . . . .60108-0943 ... . . . . . . . . . . . . . 7, 216108-0944 ... . . . . . . . . . . . . . 7, 216108-0946 ... . . . . . . . . . . . .13, 219108-0947 ... . . 7, 12, 216–217108-0948 ... . . 7, 12, 216–217108-0949 .7–8, 216, 275, 408108-0950 .7–8, 216, 275, 408108-0951 ... . . . . . . . . . . . . . 7, 216108-0952 ... . . . . . . . . . . . . . 7, 216108-0953 ... . . . . . . . . . . . . . . . . . . . 6108-0954 ... . . 6, 11, 216–218108-0955 ... . . . . . . . . . . . . . . . . . . . 6108-1136 . 14–15, 17–18, 46,

51108-1138 .. 14–18, 46, 49, 51108-1578 ... . . . . . . . . . . . . . . . . 272108-1579 ... . . . . . . . . . . . . . . . . 272108-1781 ... . . . . . . . . . . . . . . . . 763108-2187 .802–805, 807–809108-2622 ... . . . . . . . . . . . . . . . . . . . 7108-2625 ... . . . . . . . . . . . . . . . . . . . 8108-2639 ... . . . . . . . . . . . .12, 217108-2640 ... . . . . . . . . . . . .12, 217108-3297 ... . . . . . . . . . . . . . . . . 221108-3298 ... . . . . . . . . . . . . . . . . 221108-3302 ... . . . . . . . . . . . . . . . . 221108-3303 ... . . . . . . . . . . . . . . . . 221108-3990 ... . . . . . . . . . . . . . . . . . .23108-3995 ... . . . . . . . . . . . . . . . . . .23108-3998 ... . . . . . . . . . . . . . . . . . .23108-4002 ... . . . . . . . . . . . . . . . . . .23108-4016 ... . . . . . . . . . . . . . 25–27108-4017 ... . . . . . . . . . . . . . 25–27108-4022 ... . . . . . . . . . . . .30, 223108-4030 ... . . . . . . . . . . . . . 25, 27108-4031 ... . . . . . . . . . . . . . 25, 27108-4033 ... . . . . . . . . . . . . . 25, 27108-4036 ... . . . . . . . . . . . . . 25, 27108-4250 ... . . . . . . . . . . . . . 23–24108-4605 ... . . . . . . . . . . . . . . . . 614109-0058 ... . . . . . . . . . . . . . . . . . .22109-0059 ... . . . . . . . . . . . . . . . . . .22109-0060 ... . . . . . . . . . . . . . . . . . .22109-0061 ... . . . . . . . . . . . . . . . . . .22109-0478 ... . . . . . . . . . . . . . . . . 408109-0486 ... . . . . . . . . . . 275, 408109-0487 ... . . . . . . . . . . 276, 408109-0488 ... . . . . . . . . . . 275, 408109-0489 ... . . . . . . . . . . 275, 408109-0861 ... . . . . . . . . . . 617, 620109-0868 ... . . . . 601, 611, 615

109-0881 . 601–602, 753, 757109-0885 .. . . . . 279, 568–569,

578, 591, 746, 751109-1708 .. . . . . . . . . . . . . . . . . . 221109-1709 .. . . . . . . . . . . . . . . . . . 221109-3229 .. . . . . . . . . . . . . . . . . . . .54109-3230 .. . . . . . . . . . . . . . . . . . . .54109-6488 .. . . . . . . . . . . . 812, 815109-8014 .. . . . . . . . . . . . 175, 183110-0771 .. . . . . . . . . . . . 103–104110-2976 .. . . . . . . . . 32–33, 301110-2978 .. . . . . . . . . . . . . . . . . . . .33110-3118 .. . . . . . . . . . . . . . . . . . 634110-3119 .. . . . . . . . . . . . . . . . . . 634110-3362 .. . . . 44–46, 50, 229110-6124 .. . . . . . . . . . . . . . . . . . . .49110-6968 .. . . . . . . . . 24–26, 304110-6969 .. . . . . . . . . . . . . . . 55–57111-0104 .. . . . . . . . . . . . . . . . . . 549111-0105 .. . . . . . . . . . . . . . . . . . 549111-0106 .. . . . . . . . . . . . 549, 553111-0423 .. . . . . . . . . . . . . . . . . . 136111-0428 .. . . . . . 133–134, 136111-0429 .. . . . . . 133–134, 136111-0431 .. . . . . . . . . . . . . . . . . . 136111-0437 .. . . . . . . . . . . . . . . . . . 133111-0443 .. . . . . . . . . . . . . . . . . . 134111-0446 .. . . . . . . . . . . . . . . . . . 134111-1522 . 397, 828, 832, 836111-1729 .144–145, 149–150111-1730 .. . . . 144–145, 150–

151, 160–161111-2414 .. . . . . . . . . . . . . . . . . . 809111-2415 .. . . . . . . . . . . . . . . . . . 809111-8207 .. . . . . . . . . . . . . . . . . . 840112-8136 .. . . . . . . . . . . . . . . . . . 438112-8139 .. . . . . . . . . . . . . . . . . . 438112-8980 .. . . . . . . . . . . . . . . . . . 409112-9951 .. . . . . 568–569, 578,

591, 745–746, 751113-0693 .. . . . . . . . . . . . 802–809113-1047 .. . . . . . . . . . . . . . . . . . 629113-4189 .. . . . . . . . . . . . . . . . . . 783113-5880 .. . . . . . . . . . . . . . . . . . 632113-5883 .. . . . . . . . . . . . . . . . . . 632113-5890 .. . . . . . . . . . . . . . . . . . 633113-5891 .. . . . . . . . . . . . . . . . . . 633113-5894 .. . . . . . . . . . . . . . . . . . 633113-5896 .. . . . . . . . . . . . . . . . . . 633113-5900 .. . . . . . . . . . . . . . . . . . 635113-5901 .. . . . . . . . . . . . . . . . . . 635113-5902 .. . . . . . . . . . . . . . . . . . 635113-5903 .. . . . . . . . . . . . . . . . . . 635113-5905 .. . . . . . . . . . . . . . . . . . 635113-5912 .. . . . . . . . . . . . . . . . . . 635115-0605 .. . . . . . . . . . . . 491, 692

115-1145 .. . . . . . . . . . . . . . . . . . 189115-1147 .. . . . . . . . . . . . . . . . . . 160115-1176 .. . . . . . . . . . . . . . . . . . 174115-1853 . 567, 576, 584–586115-1854 . 567, 576, 584–586115-2438 .. . . . . . . . . . . . . . . 7, 216115-2439 .. . 33, 35, 204, 224,

435115-2440 .. . . . . . . .64, 209, 342115-3328 .. . . . . . . . . . . . . .42, 227115-3329 .. . . . . . . . . . . . . .42, 227115-3330 .. . . . . . . . . . . . . .42, 227115-3331 .. . . . . . . . . . . . . .42, 227115-3696 .. . . . . 568–569, 578,

591, 745–746115-3697 .. . . . . 568, 578, 591,

745–746, 751115-3699 .. . . . . . 601–602, 753115-4923 .. . . . . . . . . . . . 110, 305115-4924 .. . . . . . . . . . . . 110, 305115-4926 .. . . . . . 551, 557, 726115-4931 .. . . . . . . . . . . . 577–578115-5198 .. . . . . . . . . . . . . . . . . . 783115-6301 .. . . . . . . . . . . . 110, 305115-6302 .. . . . . . . . . . . . . . . . . . 110115-6303 .. . . . . . . . . . . . . . . . . . 110115-6307 .. . . . . . . . . . . . . . . . . . 111115-6310 .. . . . . . . . . . . . . . . . . . 111115-6312 .. . . . . . . . . . . . . . . . . . 111115-6314 .. . . . . . . . . . . . . . . . . . 111115-6315 .. . . . . . . . . . . . . . . . . . 115115-6336 .. . . . . . . . . . . . . . . . . . 786115-6337 .. . . . . . . . . . . . . . . . . . 577115-6338 .. . . . . . . . . . . . . . . . . . 578115-6359 .. . . . . . . . . . . . . . . . . . 620115-6370 .. . . . . . . . . . . . 601, 611115-7471 .. . . . . 568–569, 578,

591, 745–746115-9254 .. . . . . . . . . . . . 829, 833116-6698 .. . . . . . . .89, 213, 476116-6702 ..89, 352–353, 461,

476, 478, 683–684,698

116-8145 .. . . . . . . . . . . . . . . . . . 110116-8545 .. . . . . . . . . . . . . . . . . . . .72116-8548 .. . . . . . . . . . . . . . . . . . . .72117-0519 .. . . . . . . . . . . . . . . . . . 227117-0520 .. . . . . . . . . . . . . . . . . . 227117-0615 .. . . . . . . .42, 205, 227117-0616 .. . . . . . . .42, 205, 227117-1020 .. . . . . . . . . . . . 336–337117-1022 .. . . . . . 340–341, 454117-1023 .. . . . . . . . . . . . . . . . . . 467117-1024 .. . . . . . . . . . . . 357, 535117-1027 .. . . . . . . . . . . . . . . . . . 357117-1371 .. . . . . . 556, 725, 727

117-1372 .. . . . . . 556, 725, 727117-1616 .. . . . . . . . . . . . . . . . . . 347117-1617 .. . . . . . . . . . . . 347, 534117-1771 .. . . . . . . . . . . . . . . . . . 543117-3068 .. . . . . . . . . . . . . . . . . . 692117-4855 .. . . . . . . . . . . . . . . . . . 783117-5418 .. . . . . . . . . . . . . . . . . . 582117-5553 .. . . . . . 552, 558, 581117-5612 .570–571, 593–594117-8880 .. . . . . . . . . . . . 782, 818117-8881 .. . . . . . 781–782, 818117-8882 .. . . . . . 781–782, 818117-8883 .. . . . . . 781–782, 818117-8884 .. . . . . . . . . . . . 782, 818117-8885 . 244, 781–782, 818117-9748 .. . . . . . . .89, 213, 476118-1608 .. . . . . 319–320, 420,

426, 662, 674, 827118-1609 . 319–320, 420, 426118-1610 .. . . . . 319, 420, 426,

662, 674, 827118-1611 .. . . . . 354, 431, 462,

531, 673118-1612 .. . . . . 332, 354, 431,

462, 531118-1613 .. . . . . 332, 354, 432,

462, 673118-1614 .. . . . . 353, 461, 534,

684, 698118-1615 .. . . . . . 353, 461, 534118-1616 .. . . . . 319, 420, 426,

662, 674, 827118-1617 . 351, 478, 534, 683118-1618 .. . . . . . 351, 478, 534118-1619 .. . . . . . 367, 514, 536118-1620 .. . . . . . 367, 514, 536118-1623 .. . . . . 366, 496, 513,

536, 697118-1625 . 366, 496, 513, 536118-1628 .. . . . 366–367, 493–

494, 496, 513–514118-1630 .. . . . . . . . . . . . 367, 497118-1631 .. . . . . . . . . . . . 367, 497118-1634 .. . . . . . . . . . . . 351, 461118-1635 .. . . . . . . . . . . . 351, 461118-1636 .. . . . . . . . . . . . 366, 513118-1637 .. . . . . . . . . . . . 366, 513118-3539 .. . . . . . . . . . . . . . . . . . 409118-7302 .. . . . . . . . . . . . . . . . . . 596118-7303 .. . . . . . . . . . . . . . . . . . 596119-4553 .570–571, 593–594119-4554 .570–571, 593–594120-4660 .. . . . . . . . . . . . . . . . . . 776120-5753 .. . . . . . . .89, 212, 476120-5767 .. . . . . . . .89, 212, 476120-5785 .. . . . . . . .89, 213, 476

884

Part Number Index


120-5804 .. . . . . . . .89, 213, 476120-7027 .. . . . . . . . . . . . . . . . . . 840121-0133 .. . . . . . 556, 561, 576121-0134 .. . . . . . . . . . . . 561, 576121-0135 .. . . . . . . . . . . . 561, 576121-0137 .. . . . . . . . . . . . . . . . . . 590121-0138 .. . . . . . . . . . . . . . . . . . 590121-0140 .. . . . . . . . . . . . . . . . . . 600121-0141 .. . . . . . . . . . . . . . . . . . 600121-0824 .. . . . . . 231–232, 444121-0825 . 206, 230–231, 444121-0827 .. . . . . . 231–232, 444121-0828 . 206, 230–231, 444121-0830 .. . . . . . 231–232, 444121-0831 .. . . . . . 230–231, 444121-0834 . 206, 230–231, 444121-1257 . 206, 230–231, 444121-1258 .. . . . . . . . . . . . 493–494121-5394 .. . . . . . . . . . . . . . . . . . 631121-5395 .. . . . . . . . . . . . . . . . . . 631121-5907 .. . . . . . . . . . . . . . . . . . 166121-7351 .. . . . . . . . . . . . . . . . . . 628121-7371 .. . . . . . . . . . . . . . . . . . 628121-7373 .. . . . . . . . . . . . . . . . . . 628122-0216 .. . . . . . . . . . . . 353, 698122-0217 .. . . . . . . . . . . . . . . . . . 353123-1186 .. . . . . . . . . . . . 522, 709123-1188 .. . . . . . . . . . . . . . . . . . 522123-1190 .. . . . . . . . . . . . . . . . . . 522123-1191 .. . . . . . . . . . . . 522, 709123-1216 .. . . . . . . . . . . . . . . . . . 627123-1227 .. . . . . . . . . . . . . . . . . . 628123-1256 .. . . . . . . . . . . . . . . . . . 629123-1273 .. . . . . . . . . . . . . . . . . . 629123-1382 .. . . . . . . . . . . . . . . . . . 612123-1813 .. . . . . . . . . . . . . . . . . . 781123-5540 .. . . . . . . . . . . . . . . . . . 621123-5541 .. . . . . . . . . . . . . . . . . . 621123-5554 .. . . . . . . . . . . . . . . . . . 621123-5555 .. . . . . . . . . . . . . . . . . . 621123-8064 .. . . . . . . . . . . . . . . . . . 110124-3296 .. . . . . . . . . . . . . . . . . . 610124-8251 .. . . . . . . . . . . . 493–494124-8255 .. . . . . . . . . . . . 493–494124-8259 .. . . . . . . . . . . . . . . . . . 494124-8262 .. . . . . . . . . . . . . . . . . . 494124-8267 .. . . . . . . . . . . . 493–494124-8468 .. . . . . . . . . . . . . . . . . . 631124-8469 .. . . . . . . . . . . . . . . . . . 631124-8470 .. . . . . . . . . . . . . . . . . . 631124-8473 .. . . . . . . . . . . . . . . . . . 631124-9978 .. . . . . . . . . . . . 601, 610124-9979 .. . . . . . 601, 610–611125-3250 .. . . . . . . . . . . . 821–822125-3537 .. . . . . . . . . . . . 182–183125-4655 .. . . . . . . . . . . . 166–167

125-5163 .. . . . . . . . . . . . . . . . . . . .72125-5167 .. . . . . . . . . . . . . . . . . . . .72125-7765 .. . . . . . . . . . . . . . . . . . 839125-7766 .. . . . . . . . . . . . . . . . . . 839125-7768 .. . . . . . . . . . . . . . . . . . 839125-7769 .. . . . . . . . . . . . . . . . . . 839125-7877 .. . . . . . . . . . . . . . . . . . 635125-7878 .. . . . . . . . . . . . . . . . . . 629125-7879 .. . . . . . . . . . . . . . . . . . 629125-9380 .. . . . . . . . . . . . . . . . . . 627125-9381 .. . . . . . . . . . . . . . . . . . 627125-9382 .. . . . . . . . . . . . . . . . . . 627125-9383 .. . . . . . . . . . . . . . . . . . 627125-9384 .. . . . . . . . . . . . . . . . . . 627126-4968 .. . . . . . . . . . . . . . . . . . 628126-4969 .. . . . . . . . . . . . . . . . . . 628126-4970 .. . . . . . . . . . . . 628, 632126-4971 .. . . . . . . . . . . . 628, 632126-4975 .. . . . . . . . . . . . 628, 632126-4976 .. . . . . . . . . . . . 628, 632126-4977 .. . . . . . . . . . . . 628, 632126-5061 .. . . . . 537, 547, 551,

556, 561126-5062 .. . . . . 537, 547, 551,

556, 561126-5063 .. . . . . . . . . . . . 547, 551126-5064 .. . . . . . . . . . . . . . . . . . 590126-5065 .. . . . . . . . . . . . . . . . . . 590126-5066 .. . . . . . . . . . . . . . . . . . 600126-5067 .. . . . . . . . . . . . . . . . . . 600126-5304 .. . . . . . . . . . . . . . . . . . 568126-5305 .. . . . . . . . . . . . . . . . . . 568126-5343 .. . . . . . 191–192, 194127-0103 .. . . . . . 208, 214–215127-0159 .. . . . . . . . . . . . . . . . . . 629127-0181 .. . . . . . . . . . . . . . . . . . 629127-0204 .. . . . . . . . . . . . . . . . . . 629127-3804 .. . . . . . . . . . . . . . . . . . 819127-3805 .. . . . . . . . . . . . . . . . . . 819127-3806 .. . . . . . . . . . . . 788, 819127-3807 .. . . . . . . . . . . . . . . . . . 788127-4834 .. . . . . . 752, 755, 758127-4835 .. . . . . . . . . . . . . . . . . . 150127-6254 .. . . . . . . . . . . . . . . . . . 227127-6255 .. . . . . . . . . . . . . . . . . . 227127-7009 .. . . . . . . . . . . . . . . . . . . .72128-7743 .. . . . . . . . . . . . . . . . . . 489128-7744 .. . . . . . . . . . . . . . . . . . 489128-8829 .. . . . . . . . . . . . . . . . . . 522128-9473 .. . . . . . . . . . . . 259, 404128-9474 .. . . . . . . . . . . . 259, 404128-9545 .. . . . . . 259, 261, 404128-9546 .. . . . . . 259, 261, 404128-9555 .. . . . . . 258–261, 404128-9693 .. . . . . . . . . . . . . . . . . . 182129-2977 .. . . . . . . . . . . . 230–231

129-2978 .. . . . . . . . . . . . 230–231129-5029 .. . . . . . . . . . . . . . . . . . 493129-5030 .. . . . . . . . . . . . . . . . . . 493129-5036 .. . . . . . . . . . . . . . . . . . . .96129-5037 .. . . . . . . . . . . . . . . . . . . .96129-8552 .. . . . . . . . . . . . . . . . . . 839129-9204 .. . . . . . . . . . . . . . . . . . 115130-1428 .. . . . . . 258–261, 404130-1433 .. . . . . . 258–261, 404130-1437 .. . . . . . 258–261, 404130-4499 .. . . . . . . . . . . . . . . . . . 613130-5333 .. . . . . . . . . . . . . . . . . . 686130-5334 .. . . . . . . . . . . . . . . . . . 686130-6606 .. . . . . . . . . . . . . . . . . . 610130-7786 .. . . . . . . . . . . . . . . . . . 214130-7787 .. . . . . . . . . . . . . . . . . . 214130-7788 .. . . . . . . . . . . . . . . . . . 213130-7789 .. . . . . . . . . . . . . . . . . . 214130-7790 .. . . . . . . . . . . . . . . . . . 213130-7791 .. . . . . . . . . . . . . . . . . . 213130-7794 .. . . . . . . . . . . . . . . . . . 214130-9285 .. . . . . . . . . . . . . . . . . . 580130-9326 .. . . . . . . . . . . . . . . . . . 784131-1568 .. . . . . . . . . . . . 261–262131-1569 .. . . . . . . . . . . . 261–262131-1647 .117–124, 126–129131-1649 .. . . . . . . . . . . . 175, 190131-1650 . 155, 161, 176, 186131-1651 .. . . . . 151, 153–154,

162, 169131-1911 .. . . . . . . . . . . . . . . . . . 261131-2466 .. . . . . . . . . . . . . . . . . . 261131-3932 .. . . . . . 118, 120, 126131-3935 .. . . . . . 117–124, 126131-7083 .. . . . . . . . . . . . . . . . . . 634131-8207 .. . . . . . . . . . . . 117–124131-8742 .. . . . . . . . . . . . 206, 444131-9352 .. . . . . . 230–231, 444132-1334 .. . . . . . . . . . . . . . . . . . . .42132-1336 .. . . . . . . . . . . . . . . . . . . .42132-1998 .. . . . . . . . . . . . 829, 833132-3546 .. . . . . . . . . . . . . . . . . . 818132-3829 .. . . . . . . . . . . . 286, 413132-3830 .. . . . . . 286–287, 413132-3831 . 256, 285, 287, 413132-3832 . 256, 285, 287, 413132-3849 .. . . . . . 286–287, 413132-3861 . 256, 285–287, 413132-4676 .. . . . . . 286–287, 413132-4677 .. . . . . . 286–287, 413132-4912 .. . . . . . . . . . . . . . . . . . 287132-5794 .. . . . . . . . . . . . . . . . . . 607132-6615 . 259, 261–262, 404132-6622 . 259, 261–262, 404132-6625 .. . . . . . . . . . . . 286, 413133-0246 .. . . . . . . . . . . . . .72, 211

133-0247 ... . . . . . . . . . . . .72, 211133-0248 ... . . . . . . . . . . . .72, 211133-0249 ... . . . . . . . . . . . .72, 211133-0250 ... . . . . . . . . . . . .72, 211133-0251 ... . . . . . . . . . . . .72, 211133-0252 ... . . . . . . . . . . . .72, 211133-0253 ... . . . . . . . . . . . .72, 211133-2504 ... . . . . . . . . . . . . . . . . 605133-2554 ... . . . . . . . . . . 545, 719133-2890 ... . . . . . . . . . . . . . . . . . .71133-3843 ... . . . . . . . . . . . . . . . . 610133-9599 ... . . . . . . . . . . . . . . . . 261133-9600 ... . . . . . . . . . . . . . . . . 261134-5364 ... . . . . . . . . . . 100–101134-5365 ... . . . . . . . . . . 100–101134-5366 ... . . . . . 97–103, 108134-5368 ... . . . . . 98–103, 108134-6091 ... . . . . . . . . . . . . . . . . 214134-6092 ... . . . . . . . . . . . . . . . . 214134-6093 ... . . . . 208, 214–215134-6094 ... . . . . . . . . . . . . . . . . 214134-6403 ... . . . . . . . . . . 101, 103134-6404 ... . . . . . . . . . . 101, 103134-6638 ... . . . . . . . . . . . . . . . . 493134-7697 ... . . . . . . . . . . . . . . . . 784134-9431 ... . . . . . . . . . . 100, 102134-9432 ... . . . . . . . . . . 100–102134-9434 ... . . . . . . . . . . 100, 102134-9435 ... . . . . . . . . . . 100, 102134-9929 ... . . . . . . . . . . 100, 102134-9930 ... . . . . . . . . . . 100, 102135-8903 ... . . . . . . . . . . . . . . . . 615135-8920 ... . . . . . . . . . . . . . . . . 615136-0296 ... . . . . 788–789, 819136-0297 ... . . . . 788–789, 819136-0351 ... . . . . . . . . . . . . . . . . 543136-1090 ... . . . . . . . . . . 829, 833136-1135 ... . . . . . . . . . . 829, 833136-2394 ... . . . . . . . . . . 777, 787136-2400 ... . . . . . . . . . . . . . . . . 783136-2401 ... . . . . . . . . . . 780–781136-2402 ... . . . . . . . . . . 780–781136-2404 ... . . . . . . . . . . . . . . . . 780136-2405 ... . . . . . . . . . . . . . . . . 780136-2407 ... . . . . . . . . . . . . . . . . 780136-2409 ... . . . . . . . . . . . . . . . . 780136-2410 ... . . . . . . . . . . . . . . . . 780136-2422 ... . . . . 601, 753, 756136-2446 ... . . . . . . . . . . . . . . . . 617136-3847 ... . . . . 601, 753, 756136-4188 ... . . . . . . . . . . 184, 197136-6713 ... . . . . . . . . . . 141–142136-9349 ... . . . . . . . . . . 230–231137-3301 ... . . . . 296, 300, 303137-3384 ... . . . . . . . . . . . . . . . . 189137-4123 ... . . . . . . . . . . . . . . . . 556

Part Number Index


885

137-6114 ... . . . . . . . . . . . . . . . . 543137-9518 ... . . . 14–15, 17–18,

219, 821138-1721 ... . . . . . . . . . . . . . . . . 213138-1725 ... . . . . . . . . . . . . . . . . 211138-1726 ... . . . . . . . . . . . . . . . . 212138-1934 ... . . . . . . . . . . 290, 413138-1935 ... . . . . . . . . . . 290, 413138-1936 ... . . . . . . . . . . 264, 404138-1937 ... . . . . . . . . . . 264, 404138-1945 ... . . 263–265, 290–

291, 405, 414138-1946 ... . . 263–265, 289–

291, 405, 414138-4330 ... . . . . . . . . . . . . . . . . 189138-4331 ... . . . . . . . . . . . . . . . . 196138-5774 ... . . . . . . . . . . . . . . . . . .71138-7761 ... . . . . . . . . . . . . . . . . 156138-7762 ... . . . . . . . . . . . . . . . . 156138-7763 ... . . . . . . . . . . . . . . . . 156138-8388 ... . . . . . . . . . . . . . . . . 620138-8389 ... . . . . . . . . . . . . . . . . 615138-9378 ... . . . . . . . . . . . . . . . . 167138-9692 ... . . . . . . . . . . . . . . . . 263138-9693 ... . . . . . . . . . . . . . . . . 263138-9694 ... . . . . . . . . . . . . . . . . 264138-9695 ... . . . . . . . . . . . . . . . . 264138-9696 ... . . . . . . . . . . . . . . . . 291138-9697 ... . . . . . . . . . . . . . . . . 291138-9712 . 144, 150, 155, 160139-0246 ... . . . . . . . . . . . . . . . . 600139-0617 ... . . . . . . . . . . . . . . . . 166139-2011 ... . . . . . . . . . . . . . . . . 200139-2015 ... . . . . . . . . . . . . . . . . 200139-2016 ... . . . . . . . . . . . . . . . . 200139-2019 ... . . . . . . . . . . . . . . . . 200139-4304 ... . . . . . . . . . . . . . . . . 761139-6261 ... . . . . . . . . . . . . . . . . 762139-6270 ... . . . . . . . . . . . . . . . . 761139-6364 ... . . . . . . . . . . 761, 768139-6411 ... . . . . . . . . . . . . . . . . 773139-8193 ... . . . . . . . . . . . . . . . . 784139-9015 ... . . . . . . . . . . 480–481139-9016 ... . . . . . . . . . . 480–481139-9019 ... . . . . . . . . . . . . . . . . 481139-9020 ... . . . . . . . . . . . . . . . . 481140-0291 ... . . . . . . . . . . . . . . . . 174140-3048 ... . . . . 605–606, 613140-4005 ... . . . . . . . . . . . . . . . . 768140-4008 ... . . . . . . . . . . . . . . . . 768140-4022 ... . . . . . . . . . . . . . . . . 767140-4313 ... . . . . . . . . . . 771, 778140-4314 ... . . . . . . . . . . 771, 778140-4338 ... . . . . . . . . . . 769–770141-3245 ... . . . . . . . . . . . . . . . . 818141-9655 ... . . . . . . . . . . . . . . . . 617

142-1365 .. . . . . . . . . . . . 341–342142-1803 .. . . . . . . . . . . . . . . . . . 616142-1804 .. . . . . . . . . . . . . . . . . . 616142-2803 .. . . . . . . . . . . . 174, 182142-2805 .. . . . . . . . . . . . 182, 184142-4412 .. . . . . . . . . . . . . . . . . . 635142-4413 .. . . . . . . . . . . . . . . . . . 635142-4414 .. . . . . . . . . . . . . . . . . . 635143-0746 .. . . . . . . . . . . . 188, 627143-4891 .. . . . . . . . . . . . . . . . . . 614143-9192 .. . . . . . . . . . . . . . . . . . 562143-9194 .. . . . . . . . . . . . . . . . . . 562144-0805 .. . . . . . . . . . . . 616–617144-0806 .. . . . . . . . . . . . 616–617144-8598 .. . . . . . . . . . . . . . . . . . 617144-8602 .. . . . . . . . . . . . . . . . . . 617145-2948 .. . . . . . . . . . . . . . . . . . 783145-2949 .. . . . . . . . . . . . . . . . . . 780145-2950 .. . . . . . . . . . . . . . . . . . 783145-2951 .. . . . . . . . . . . . . . . . . . 780145-2952 .. . . . . . . . . . . . . . . . . . 780145-2953 .. . . . . . . . . . . . 780, 782145-2970 .. . . . . . . . . . . . 617, 624145-5181 . 262–263, 268, 289145-7132 .. . . . . . . . . . . . . . . . . . . .56145-7133 .. . . . . . . . . . . . . . . . . . . .56145-7134 .. . . . . . . . . . . . . . . . . . . .56145-7135 .. . . . . . . . . . . . . . . . . . . .56145-9320 .. . . . . . . . . . . . . . . . . . 614146-0984 .. . . . . . . . . . . . . . . . . . 768146-0985 .. . . . . . . . . . . . . . . . . . 768146-3584 .. . . . . . . . . . . . . . . . . . 185146-5126 .. . . . . . . . . . . . . . . . . . 196146-5132 .. . . . . . . . . . . . . . . 47–48146-6062 .. . . . . . . . . . . . . . . . . . 765146-6064 .. . . . . . . . . . . . . . . . . . 769146-9174 .. . . . . . . . . . . . . . . . . . 541146-9175 .. . . . . . . . . . . . . . . . . . 541147-0423 .. . . . . . . . . . . . . . . . . . 541147-5330 .. . . . . . . . . . . . . . . . . . 186147-5331 .. . . . . . . . . . . . . . . . . . 186147-5332 .. . . . . . . . . . . . . . . . . . 186147-5333 .. . . . . . . . . . . . . . . . . . 186147-6879 .. . . . . . . . . . . . . . . . . . 207147-6880 .. . . . . . . . . . . . . . . . . . 207148-2465 .. . . . . . . . . . . . 204–205148-2487 .. . . . . . . .42, 205, 227148-2494 .. . . . . . . .42, 205, 227148-2594 .. . . . . . . .42, 205, 227148-2596 .. . . . . . . .42, 205, 227148-2720 .. . . . . . . . . . . . . . . . . . 214148-2721 .. . . . . . . . . . . . . . . . . . 214148-3095 .. . . . . . . . . . . . . . . . . . 618148-3111 .. . . . . . 618, 625–626

148-3533 .. . . . . 281, 296, 300,303, 603–604, 754,

757148-5072 .. . . . . . . . . . . . . . . . . . 262148-5073 .. . . . . . . . . . . . . . . . . . 262149-1049 .. . . . . . . . . . . . . . . . . . 206149-1050 .. . . . . . . . . . . . 206–207149-1051 .. . . . . . . . . . . . 206–207149-1054 .. . . . . . . . . . . . . . . . . . 206149-1056 .. . . . . . . . . . . . . . . . . . 206149-2494 .. 74, 77–78, 80–86149-2495 ..74, 78, 81, 83, 85,

211150-0392 .. . . . . . . . . . . . . . . . . . 634150-0394 .. . . . . . . . . . . . . . . . . . 634150-0396 .. . . . . . . . . . . . . . . . . . 634150-1989 .. . . . . . . . . . . . . . . . . . 207150-1990 .. . . . . . . . . . . . . . . . . . 207150-4373 .. . . . . . . . . . . . . . . . . . 408150-4419 .. . . . . . . . . . . . . . . . . . 541150-4742 . 599, 608–609, 756150-4764 .. . . . . . . . . . . . . . . . . . 610150-4766 .. . . . . . . . . . . . . . . . . . 610150-4767 .. . . . . . . . . . . . . . . . . . 610150-4768 .. . . . . . . . . . . . . . . . . . 610150-4769 .. . . . . . . . . . . . . . . . . . 610150-4770 .. . . . . . . . . . . . . . . . . . 610150-7865 .. . . . . . . . . . . . . . . . . . 750150-7866 .. . . . . . . . . . . . . . . . . . 750151-0924 .. . . . . . . . . . . . . . . . . . 208151-0925 .. . . . . . . . . . . . . . . . . . 208151-0926 .. . . . . . . . . . . . . . . . . . 208151-8863 .. . . . . . . . . . . . . . . . . . 112152-3298 .. . . . . . . . . . . . . . . . . . 149152-3421 .75–76, 78–87, 212152-7146 .. . . . . . . . . . . . 289–290152-7182 .. . . . . . 255, 288, 412152-7183 .. . . . . . 255, 288, 412152-8038 .. . . . . . . . . . . . . . . . . . . . . 8152-8039 .. . . . . . . . . . . . . . . . . . . . . 8152-8040 .. . . . . . . . . . . . . . . . . . . . . 8152-8041 .. . . . . . . . . . . . . . . 35–36152-8043 .. . . . . . . . . . . . . . . 35–36152-8044 .. . . . . . . . . 36–37, 436152-8045 .. . . . . . . . . . . . . . . 36–37152-8047 .. . . . . . . . . . . . . . . 35–36152-8048 .. . . . . . . . . . . . . . . . . . . .66152-8049 .. . . . . . . . . . . . . . . . . . . .66152-8050 .. . . . . . . . . . . . . . . . . . . .66152-8053 .. . . . . . . . . . . . . . . . . . . .66152-8054 .. . . . . . . . . . . . 112, 487152-8055 .. . . . . . . . . . . . . . . . . . 112152-8057 .. . . . . . . . . . . . . . . . . . 112152-8069 .. . . . . 7–8, 216, 276,

408, 744

152-8070 .. . . .33, 35–37, 204,224, 302, 435–436,

561152-8071 .. . .64, 66–68, 209–

210, 336, 342, 451,466–467, 575, 589,

749–750152-8073 .. . . . . 110, 112–114,

159, 305–306, 357,484, 486–487, 502

152-8075 .. . . . . . . . . 8, 276, 408152-8080 .. . . . . . 112, 306, 487152-8555 .. . . . . . 752, 755, 758152-8570 .. . . . . . . . . . . . 755, 758152-8628 .. . . . . . . . . . . . 577, 745153-1624 .. . . . . . . . . . . . . . . . . . 612153-3901 .. . . . . . . . . . . . . . . . . . 154153-5044 .. . . . . . . . . . . . . . . 75–77153-5981 .. . . . . . . . . . . . . . . . . . 772153-5982 .. . . . . . . . . . . . . . . . . . 765153-5985 .. . . . . . . . . . . . . . . . . . 767154-2233 .. . . . . . . . . . . . . . . . . . 774154-2333 .. . . . . . . . . . . . . . . . . . 775154-3298 .. . . . . 144, 146–150,

155, 160154-3306 .. . . . . . . . . . . . . . . . . . 185154-3307 . 144, 146–150, 160154-3308 .. . . . . . . . . . . . 182–184154-3309 .. . . . . . . . . . . . 167–168154-3647 .. . . . . . . . . . . . 415, 422154-3652 .. . . . . . . . . . . . . . . . . . 310154-3654 .. . . . . 277, 310, 415,

422–423154-3656 .. . . . . . . . . . . . . . . . . . 310154-3657 .. . . . . . . . . . . . . . . . . . 310154-3659 .. . . . 323, 326, 343–

344, 428–429, 437,456, 505

154-3660 .. . . . . 396–398, 828,832, 836

154-3661 .. . . . . . . . . . . . . . . . . . 422154-3662 . 325–326, 429, 529154-3664 ..11, 217, 276, 310,

415, 422–423154-3667 .. . . . . . 455–456, 529154-3672 .. . . . . 323, 343–344,

428, 455–456154-3676 .. . . . . . . . . . . . 323, 529154-3677 .. . . . . . . . . . . . . . . . . . 436154-7311 .. . . . . . . . . . . . 204, 224155-2048 .. . . . . . . . . . . . . . . . . . 199155-2742 .. . . . . . . . . . . . . . . . . . 156155-2754 .. . . . . . . . . . . . . . . . . . 155155-4102 .. . . . . . . . . . . . . . . . . . 633155-4103 .. . . . . . . . . . . . . . . . . . 633155-4105 .. . . . . . . . . . . . . . . . . . 633

886

Part Number Index


155-4106 .. . . . . . . . . . . . . . . . . . 633155-4107 .. . . . . . . . . . . . . . . . . . 635155-4109 .. . . . . . . . . . . . . . . . . . 635155-4111 .. . . . . . . . . . . . . . . . . . 635155-4112 .. . . . . . . . . . . . . . . . . . 635155-6844 .. . . . . . . . . . . . 772–773155-8399 .. . . . . . . . . . . . . . . . . . 208155-8400 .. . . . . . . . . . . . . . . . . . 208155-9879 .. . . . . . . . . . . . 196–197156-4653 .. . . . . . . . . . . . 196–197156-4701 .. . . . . . . . . 36–37, 436156-5342 .. . . . . . . . . . . . . . . 75–77156-5351 .. . . . . . . . . . . . 196–197156-8357 .. . . . . . . . . . . . . . . . . . 196157-1373 .. . . . . . . . . . . . . . . . . . . .71157-1374 .. . . . . . . . . 71, 73, 346157-1606 .. . . . . . . . . . . . . . . . . . 613157-4292 .. . . . . . . . . . . . . . . . . . 174157-4293 .. . . . . . . . . . . . . . . . . . 189158-4380 .. . . . . 537, 546–547,

550–551, 554–555,559–560, 572–574,

727158-4381 .. . . . . 537, 546–547,

550–551, 554–555,559–560, 572–574,

727158-4675 .. . . . . . . . . . . . . . . . . . 767158-4676 .. . . . . . . . . . . . 766–767158-4677 .. . . . . . . . . . . . 766–767158-4678 .. . . . . . . . . . . . 766–767158-4679 .. . . . . . . . . . . . 766–767158-4680 .. . . . . . . . . . . . 766–767158-4681 .. . . . . . . . . . . . 766–767158-4682 .. . . . . . . . . . . . 766–767158-4683 .. . . . . . . . . . . . 766–767158-4684 .. . . . . . . . . . . . 766–767158-4712 .. . . . . . . . . . . . . . . . . . 778158-4713 .. . . . . . . . . . . . . . . . . . 778158-4714 .. . . . . . . . . . . . . . . . . . 778158-4766 .. . . . . . . . . . . . . . . . . . 772158-4767 .. . . . . . . . . . . . 772–773158-4768 .. . . . . . . . . . . . 772–773158-4769 .. . . . . . . . . . . . . . . . . . 772158-4770 .. . . . . . . . . . . . 772–773158-4771 .. . . . . . . . . . . . 772–773158-4772 .. . . . . . . . . . . . 772–773158-4773 .. . . . . . . . . . . . 772–773158-4774 .. . . . . . . . . . . . 772–773158-4775 .. . . . . . . . . . . . 772–773158-4776 .. . . . . . . . . . . . 772–773158-4777 .. . . . . . . . . . . . 773–774158-4795 .. . . . . . . . . . . . . . . . . . 776158-8086 .. . . . . 579–581, 592,

747–748, 752158-8096 .. . . . . . . . . . . . . . . . . . 580

159-0049 .. . . . . . . . . . . . . . . . . . 788159-3662 .. . . . . . . . . . . . . . . . . . . .76159-8346 .. . . . . . . . . . . . . . . . . . 628159-8347 .. . . . . . . . . . . . . . . . . . 632159-9526 .. . . . . 579–581, 592,

747–748, 752160-4103 .. . . . . . . . . . . . . . . 92–93160-4106 .. . . . . . . . . . . . . . . . . . . .93160-4939 .. . . . . . . . . . . . . . . . . . . .71160-4940 .. . . . . . . . . . . . . . . . . . . .71160-5798 .. . . . . . . . . . . . . . . . . . . .71160-5799 .. . . . . . . . . . . . . . . . . . . .71160-6631 .. . . . . 196–198, 281,

296, 603–604, 754,757

160-6910 .. . . . . . . . . . . . . . . . . . . .76160-7816 .. . .9–10, 217, 273–

274, 407–408160-7818 .. . . .37, 39–40, 225,

323, 325, 342–343,428–429, 434, 436,

455, 505, 529160-7819 .. . 67–68, 336–337,

340, 451–452, 455,466–468, 532

160-7820 .. 64, 209–210, 341160-7821 .. . . . . . . . . . . . . . . . . . . .66160-9359 .. . . . . . . . . . . . . . . . . . 211160-9756 .. . . . . 13–15, 44, 46,

219, 229, 821160-9757 .. . . 13–15, 219, 821160-9761 .. . . 13–15, 219, 821161-2166 .. . . . . . . . . . . . . . . . . . 494161-6304 .. . . . . . . . . . . . 562, 576161-6305 .. . . . . . . . . . . . 577, 590161-7247 . 14–15, 44–46, 50,

219, 229, 821161-7249 . 14–15, 44–46, 50,

219, 229, 821161-7350 .. . . . 44–46, 50, 229161-7550 .. . . . . . . . . 44, 46, 229161-8581 .. . . . . . . . . . . . . . . . . . 108161-8582 .. . . . . . . . . . . . 135–136162-2166 ..74, 79, 81, 83, 85,

89, 117–126, 129,153, 162, 169, 212–213, 365, 476, 493,511, 694, 811–812,

814162-2167 .. . . . 145–151, 160–

161, 167–168, 186,491

162-2168 .. . . . . . 182–184, 199162-4303 .. . . . . . . . . . . . . . . . . . 715162-4304 .. . . . 540, 542, 715–

716, 720

162-4305 . 540, 542, 715, 720162-4306 .. . . . 540, 542, 715–

716, 720162-4307 .. . . . 540, 542, 715–

716, 720162-5610 .. . . . . . . . . . . . . . . . . . 631162-5611 .. . . . . . . . . . . . . . . . . . 631162-5612 .. . . . . . . . . . . . . . . . . . 631162-7431 .. . . . . . . . . . . . . . . . . . 545162-7862 ..74, 79, 81, 83, 85,

117–126, 153, 162,169, 212, 307

162-7863 .. . . . 145–151, 160–161, 167–168, 186,

491162-7864 .. . . . . . 182–184, 199162-8438 .. . . . . . . . . . . . . . . . . . 200163-2169 .. . . . . . . . . . . . . . . 91–92163-2170 .. . . . . . . . . . . . . . . 91–92163-2171 .. . . . . . . . . . . . . . . 91–93163-2172 .. . . . . . . . . . . . . . . 91–93163-2173 .. . . . . . . . . . . . . . . 92–93163-2174 .. . . . . . . . . . . . . . . 92, 94163-2175 .. . . . . . . . . . . . . . . 92–93163-2176 .. . . . . . . . . . . . . . . 92–93163-2177 .. . . . . . . . . . 91, 93–94163-2178 .. . . . . . . . . . 91, 93–94163-2179 .. . . . . . . . . . . . . . . . . . . .93163-2180 .. . . . . . . . . . . . . . . . . . . .93163-2415 .. . . . . . . . . . . . . . . . . . 155163-2922 .. . . . . . . .42, 205, 227163-2923 .. . . . . . . .42, 205, 227163-2924 .. . . . . . . .42, 205, 227163-2925 .. . . . . . . .42, 205, 227163-4143 .. . . . . . . . . . . . . . . . . . 538163-6406 .. . . . . . . . . . . . . . . . . . 160163-7093 .. . . . . . . . . . . . 773–774163-7094 .. . . . . . . . . . . . . . . . . . 774163-7376 .. . . . . . . . . . . . . . . . . . 633163-7393 .. . . . . . . . . . . . . . . . . . 580163-7538 .. . . . . . . . . . . . . . . . . . 766163-7539 .. . . . . . . . . . . . . . . . . . 766163-8682 .. . . . . . . . . . . . . . . . . . 633163-8686 .. . . . . . . . . . . . . . . . . . 135163-8688 .. . . . . . . . . . . . . . . . . . 136164-0403 .. . . . . . . . . . . . . . . . . . 108164-4085 .. . . . . . . . . . . . . . . . . . 610164-4611 .. . . . . . . . . . . . . . . . . . 108165-1746 .. . . . . . . . . . . . . . . . . . . . . 8165-1747 .. . . . . . . . . . . . . . . . . . . . . 8165-1748 .. . . . . . . . . . . . . . . . . . . . . 8165-1749 .. . . . . . . . . . . . . . . . . . . . . 8165-1750 .. . . . . . . . . 35–36, 436165-1751 .. . . . . . . . . 35–36, 436165-1752 .. . . . . . . . . 35–36, 436165-1753 .. . . . . . . . . 35–36, 436

165-1754 ... . . . . . . . . . . . . . . . . . .66165-1755 ... . . . . . . . . . . . . . . . . . .66165-1756 ... . . . . . . . . . . . . . . . . . .66165-1757 ... . . . . . . . . . . . . . . . . . .66165-1758 ... . . . . 112, 305, 487165-1759 ... . . . . 112, 305, 487165-1760 ... . . . . 112, 305, 487165-1761 ... . . . . 112, 305, 487165-1767 ... . . . . . . . . . . . . . 8, 276165-1768 ... . . . . . . . 36–37, 436165-1769 ... . . . . . . . . . . . . . . . . . .66165-1770 ... . . . . 112, 306, 487165-3663 .132–133, 135–136165-3664 .132–133, 135–136165-6942 ... . . 119–120, 123–

124, 128165-6946 .75–76, 78–87, 212165-7211 ... . . . . . . . . . . . . . . . . 131165-7574 ... . . . . . . . . . . . . . . . . 131165-7576 ... . . . . . . . . . . 131–132165-7855 ... . . . . . . . . . . . . . . . . 170165-7860 ... . . . . . . . . . . . . . . . . 170165-7861 ... . . . . . . . . . . . . . . . . 170165-7862 ... . . . . . . . . . . . . . . . . 170166-0613 ... . . . . . . . . . . 439–441166-2121 ... . . . . . . . . . . 440–441166-2123 ... . . . . . . . . . . 440–441166-2287 ... . . . . . . . . . . . 98–109166-3315 ... . . . . . . . . . . 122, 124166-3316 ... . . . . . . . . . . 122, 124166-3317 ... . . . . . . . . . . 121–124166-3318 ... . . . . . . . . . . 122–124166-3324 ... . . . . . . . . . . 147, 168166-3449 ... . . . . . . . . . . . . . . . . 133166-3451 ... . . . . . . . . . . . . . . . . 133166-3729 ... . . . . . . . . . . . . . . . . 756166-4927 ... . . . . . . . . . . . . . . . . 614166-4928 ... . . . . . . . . . . . . . . . . 614166-4929 ... . . . . . . . . . . . . . . . . 614166-4930 ... . . . . . . . . . . . . . . . . 619166-4931 ... . . . . . . . . . . . . . . . . 619166-4932 ... . . . . . . . . . . 617, 619166-4933 ... . . . . . . . . . . 617, 619166-9445 ... . . . . . . . . . . . . . . . . 183167-1128 ... . . . . . . . . . . . . . . . . 628167-1946 ... . . . . . . . . . . 183–184167-1947 ... . . . . . . . . . . . . . . . . 168167-1950 ..74, 77, 80, 82, 84,

86167-1951 ..74, 77, 80, 82, 84,

86167-1952 ..74, 78, 80, 82, 84,

87167-4339 ... . . . . . . . . . . . . . . . . 712168-6755 ... . . . . . . . . . . . . . . . . 780168-6756 ... . . . . . . . . . . . . . . . . 780

Part Number Index


887

168-6757 ... . . . . . . . . . . . . . . . . 780168-6758 ... . . . . . . . . . . . . . . . . 780168-6759 ... . . . . . . . . . . . . . . . . 780168-6760 ... . . . . . . . . . . . . . . . . 780168-7576 ... . . . . . . . . . . . . . . . . 634168-7577 ... . . . . . . . . . . . . . . . . 634168-8407 ... . . . . . . . . . . . . . . . . 627168-8408 ... . . . . . . . . . . . . . . . . 627168-8409 ... . . . . . . . . . . . . . . . . 627169-0161 ... . . . . . . . . . . . . . . . . 133169-0162 ... . . . . . . . . . . . . . . . . 133169-0163 ... . . . . . . . . . . . . . . . . 132169-0164 ... . . . . . . . . . . . . . . . . 132169-5867 ... . . . . . . . 71, 73, 346169-5868 ... . . . . . . . . . . . . . . . . . .71169-8088 ... . . . . . . . . . . . . . . . . 783170-0792 ..74, 78, 80, 82, 84,

87170-0820 ... . . . . . . . . . . . . . . . . 628170-2501 ... . . . . . . . . . . 824–825170-3823 ... . . . . . . . . . . 115, 490170-3827 ... . . . . . . . . . . 115, 490170-4419 ... . . . . . . . . . . . . . . . . 783171-5713 ... . . . 579–581, 592,

625, 747–748, 752171-5714 ... . . . . . . . . . . . . . . . . 624171-5811 ... . . . . . . . . . . . . . . . . 625171-5825 ... . . . . . . . . . . . . . . . . 624171-5882 ..89, 129, 213, 365,

476, 493–494, 511,694, 811–812, 814

171-5883 ... . . . . . . . . . . 812, 815171-5897 ... . . . . . . . . . . . . . . . . 633171-5898 ... . . . . . . . . . . . . . . . . 635171-5899 ... . . . . . . . . . . . . . . . . 636171-6766 ... . . . . . . . . . . . . . . . . 781171-6767 ... . . . . . . . . . . . . . . . . 781171-7624 ... . . . . . . . . . . . . . . . . 782172-0160 ... . . . 250, 403, 830,

834, 838172-1764 ... . . . . . . . . . . . . . . . . 777172-1768 ... . . . . . . . . . . . . . . . . 769172-1769 ... . . . . . . . . . . . . . . . . 769172-1965 ... . . . . . . . . . . . . . . . . 767172-2100 ... . . . . . . . . . . . . . . . . 768172-3288 ... . . . . . . . . . . . . . . . . 781172-6219 ... . . . . . . . . . . . . . . . . 100172-6220 ... . . . . . . . . . . . . . . . . 100172-6228 ... . . . . . . . . . . 100–101172-6229 ... . . . . . . . . . . . . . . . . 101173-0946 ... . . . . . . . . . . . .73, 211173-7652 ... . . . . . . . . . . . . . . . . 125173-7653 ... . . . . . . . . . . . . . . . . 125173-7656 ... . . . . . . . . . . . . . . . . 125173-7657 ... . . . . . . . . . . . . . . . . 125173-7658 ... . . . . . . . . . . . . . . . . 125

173-7659 .. . . . . . . . . . . . . . . . . . 125173-7660 .. . . . . . . . . . . . . . . . . . 125173-9775 .. . . . . . . . . . . . . . . . . . 635174-0217 .. . . . . . . . . . . . 622–623174-0218 .. . . . . . . . . . . . 622–623174-0219 .. . . . . . . . . . . . 622–623174-0220 .. . . . . . . . . . . . . . . . . . 623174-0221 .. . . . . . . . . . . . 622–623174-0222 .. . . . . . . . . . . . 622–623174-0223 .. . . . . . . . . . . . . . . . . . 623174-0224 .. . . . . . . . . . . . . . . . . . 623174-0225 .. . . . . . . . . . . . . . . . . . 624174-0226 .. . . . . . . . . . . . . . . . . . 624174-0227 .. . . . . . . . . . . . . . . . . . 623174-5948 .. . . . . . . . . . . . . . . . . . 258174-5949 .. . . . . . . . . . . . . . . . . . 258174-6977 .. . . . . . . . . . . . . . . . . . 294174-6978 .. . . . . . . . . . . . . . . . . . 294174-6979 .. . . . . . . . . . . . . . . . . . 258174-6980 .. . . . . . . . . . . . . . . . . . 258174-6981 .. . . . . . . . . . . . . . . . . . 258174-6982 .. . . . . . . . . . . . . . . . . . 258174-6983 .. . . . . . 256, 285–286174-6985 .. . . . . . 256, 285–286174-6986 .. . . . . . . . . . . . . . . . . . 258174-6987 .. . . . . . . . . . . . . . . . . . 259174-6992 .. . . . . . . . . . . . 255, 285174-6993 .. . . . . . . . . . . . 255, 285174-6994 .. . . . . . . . . . . . 255, 285174-7001 .. . . . . . . . . . . . . . . . . . 248174-7002 .. . . . . . . . . . . . . . . . . . 248174-7006 .. . . . . . . . . . . . . . . . . . 280174-7007 .. . . . . . . . . . . . . . . . . . 280174-8500 .. . . . . . . . . . . . . . . . . . 625174-8501 .. . . . . . . . . . . . . . . . . . 625174-8783 .. . . . . . . . . . . . . . . . . . . .76174-8786 .. . . . . . . . . . . . . . . . . . . .76174-8788 .. . . . . . . . . . . . . . . . . . . .77174-8789 .. . . . . . . . . . . . . . . . . . . .77174-8790 .. . . . . . . . . . . . . . . . . . . .77175-1229 .. . . . . . . . . . . . . . . . . . 634175-3828 .. . . . . . . . . . . . . . . . . . 136175-3829 .. . . . . . . . . . . . . . . . . . 132175-3830 .. . . . . . . . . . . . . . . . . . 133175-3831 .. . . . . . . . . . . . . . . . . . 133175-7045 .. . . . . . . . . . . . . . . . . . 630175-7897 .. . . . . . . . . . . . . . . . . . 612175-8020 . 346, 430, 507, 530175-8021 .. . . . . 328, 346, 430,

507, 530175-8022 .. . . . . . . . . . . . 328, 530175-8023 .. . . . . . . . . . . . 328, 530175-8024 .. . . . . . . . . . . . 531, 673175-8025 .. . . . . . . . . . . . . . . . . . 531175-8031 .. . . . . . . . . . . . . . . . . . 533175-8032 .. . . . . . . . . . . . . . . . . . 533

175-8035 .. . . . . . 534, 684, 699175-8036 .. . . . . . . . . . . . . . . . . . 534175-8038 .. . . . . . . . . . . . . . . . . . 534175-8184 . 639, 645, 651, 658175-8185 .. . . . 641–642, 647–

648, 653–654, 662175-8216 .. . . . . . . . . . . . . . . . . . 696175-8255 .. . . . . . . . . . . . . . . . . . 531175-8256 .. . . . . . . . . . . . . . . . . . 532175-8257 .. . . . . . . . . . . . . . . . . . 532175-8263 .. . . . . . . . . . . . . . . . . . 534175-8365 . 328, 346, 430, 530175-8366 . 328, 346, 430, 530175-8367 .. . . . . . 328, 346, 530175-8368 .. . . . . . 328, 346, 530175-8369 .. . . . . . . . . . . . . . . . . . 533175-8370 .. . . . . . . . . . . . . . . . . . 533175-8371 .. . . . . . . . . . . . . . . . . . 533175-8372 .. . . . . . . . . . . . . . . . . . 533175-8552 .. . . . . 529–530, 637,

649, 656–657, 667–668

175-8553 .. . . . . 328, 430, 438,457, 530

175-8555 .. . . . . . . . . . . . . . . . . . 532175-8673 .. . . . . . . . . . . . 328, 530175-8674 .. . . . . . . . . . . . 328, 530175-8728 .. . . . . . . . . . . . . . . . . . 533175-8759 .. . . . . . . . . . . . . . . . . . 535175-8789 .. . . . . . . . . . . . . . . . . . 658175-8802 .. . . . . . . . . . . . 362, 535175-8811 .. . . . . . . . . . . . . . . . . . 658175-8838 .. . . . . . . . . . . . . . . . . . 690175-8839 .. . . . . . . . . . . . . . . . . . 690175-8881 .. . . . . . . . . . . . 362, 535175-8882 .. . . . . . . . . . . . 362, 535175-8923 . 530, 537, 665–666175-8927 .. . . . . . . . . . . . . . . . . . 532175-8928 .. . . . . . . . . . . . . . . . . . 532175-8929 .. . . . . . 533, 678, 701176-1281 .. . . . . . . . . . . . . . . . . . 294176-2108 .. . . . . . . . . . . . . . . . . . 626176-2146 .. . . . . . . . . . . . . . . . . . 626176-4870 .. . . . . . . . . . . . 541, 715176-4871 .. . . . . . . . . . . . . . . . . . 542176-4872 .. . . . 540, 542, 715–

716, 720176-4874 .. . . . . . . . . . . . . . . . . . 540176-5331 .. . . . . . 612, 628, 632176-5333 .. . . . . . 612, 628, 632176-7524 .. . . . . . . . . . . . . . . . . . 626176-8618 .. . . . . . . . . . . . . . . . . . 741176-9728 .. . . . . . . . . . . . 255, 285178-1096 .. . . . . . . . . . . . . . . . . . . .60178-2543 .. . . . . . . . . . . . . . . . . . 635178-2545 .. . . . . . . . . . . . . . . . . . 635

178-3927 .. . . . . . . . . . . . . . . . . . 633178-3929 .. . . . . . . . . . . . . . . . . . 633178-7195 .. . . . . . . . . . . . 132–137178-7294 .. . . . . . . . . . . . . . . . . . 612178-7296 .. . . . . . . . . . . . . . . . . . 612179-0126 .. . . 33, 35, 302, 435179-1292 .. . . . . . 569, 592, 602179-1488 .. . . . . . . . . . . . . . . . . . 603179-1492 .. . . . . . . . . . . . . . . . . . 603179-1497 . 603–604, 754, 757179-1499 . 603–604, 754, 757179-2348 .. . . . . . . . . . . . . . . . . . 618179-3425 .. . . . . 567–568, 576,

584–588179-3426 .. . . . . . 596–598, 753179-3427 .. . . . . 567–568, 576,

584–588179-3428 .. . . . . . 596–598, 753179-4182 .. . . . . . . . . . . . . . . . . . 612179-9339 .. . . . . . . . . . . . . . . . . . 540179-9340 .. . . . . . . . . . . . . . . . . . 540180-0507 .. . . . . . 336–337, 451180-0509 .. . . . . . . . . . . . 336–337180-2677 .. . . . . . . . . . . . . . . . . . 544180-2681 .. . . . . . . . . . . . . . . . . . 540180-2683 .. . . . . . . . . . . . . . . . . . 540180-2684 .. . . . . . . . . . . . . . . . . . 540180-2686 .. . . . . . . . . . . . . . . . . . 540180-2687 .. . . . . . . . . . . . . . . . . . 540180-2689 .. . . . . . . . . . . . . . . . . . 540180-4995 .. . . . . . . . . . . . . . . . . . 199180-7319 .. . . . . . . . . . . . . . . . . . 265180-7320 .. . . . . . . . . . . . . . . . . . 265180-7321 .265–266, 289–290183-2381 .. . . . . . . . . . . . . . . . . . 289183-2382 .. . . . . . . . . . . . . . . . . . 289183-2874 . 603–604, 754, 757183-2875 .. . . . . . 604, 754, 757183-2879 . 603–604, 754, 757183-2880 .. . . . . . 604, 754, 757183-2883 . 603–604, 754, 757183-5204 .. . . . . . . . . . . . . . . . . . . .26183-5207 .. . . . . . . . . . . . . . . . . . . .26183-5213 .. . . . . . . . . . . . . . . . . . . .22183-5214 .. . . . . . . . . . . . . . . . . . . .22183-5949 .. . . . . . . . . . . . . . . . . . . .23183-5950 .. . . . . . . . . . . . . . . . . . . .23183-8467 .. . . . . . . . . . . . . . . . . . . .30183-8468 .. . . . . . . . . . . . . . . . . . . .26184-2184 .. . . . . . . . . . . . . . . . . . 766184-2607 .. . . . . . . . . . . . . . . . . . 199184-4395 .. . . . . . . . . . . . . . . . . . 170184-4396 .. . . . . . 176–177, 187184-5859 .. . . . . . . . . . . . . . . . . . 540184-6305 .. . . . . . . . . . . . 198–199184-6306 .. . . . . . . . . . . . . . . . . . 199

888

Part Number Index


185-0656 .. . . . . . . . . . . . . . . . . . 771185-0657 .. . . . . . . . . . . . . . . . . . 771185-5253 .. . . . . . . . . . . . . . . . . . . .72185-5254 .. . . . . . . . . . . . . . . . . . . .72185-5256 .. . . . . . . . . . . . . . . . . . . .72185-5257 .. . . . . . . . . . . . . . . . . . . .72185-6151 . 328, 347, 439, 508185-6152 .. . . . . . . . . . . . . . . . . . 439185-7280 .. . . . . . . . . . . . . . . . . . 770185-9159 .. . . . . . . . . . . . . . . . . . 785185-9160 .. . . . . . . . . . . . . . . . . . 785185-9185 .. . . . . . . . . . . . . . . . . . 785185-9380 .. . . . . . . . . . . . . . . . . . 634185-9381 .. . . . . . . . . . . . . . . . . . 634185-9382 .. . . . . . . . . . . . . . . . . . 634186-0780 .. . . . . . . . . . . . 164, 173186-0781 .. . . . . . . . . . . . 164–165186-2836 .. . . . . . . . . . . . . . . . . . 705186-5318 .. . . . . . . . . . . . . . . . . . 199186-5319 .. . . . . . . . . . . . . . . . . . 199186-5499 .. . . . . . . . . . . . . . . . . . 594186-5500 .. . . . . . . . . . . . . . . . . . 594186-5502 .. . . . . . . . . . . . . . . . . . 566186-5503 .. . . . . . . . . . . . . . . . . . 566186-5564 .570–571, 593–594187-1011 .. . . . . . . . . . . . . . . . . . 196187-1484 .. . . . . . . . . . . . 196–197187-2003 .. . . . . . . . . . . . . . . . . . 438187-2004 .. . . . . . . . . . . . . . . . . . 438187-2005 .. . . . . . . . . . . . . . . . . . 438187-2006 .. . . . . . . . . . . . . . . . . . 438187-3298 .. . . . . . . . . . . . . . . . . . 200187-4845 .. . . . . . . . . . . . 328, 439187-6540 .. . . . . . . . . . . . . . . . . . 563187-9317 .. . . . . . . . . . . . . . . . . . 448187-9318 .. . . . . . . . . . . . . . . . . . 448188-1452 .. . . . . . . . . . . . 196–197188-3064 .. . . . 537, 546, 550–

551, 554–556, 559–560, 725, 727

188-3065 . 567, 576, 584–586188-3066 .. . . . . . . . . . . . 596–597188-5246 .. . . . . . . . . . . . 362, 535188-5251 .. . . . . . . . . . . . . . . . . . 535188-5252 .. . . . . . . . . . . . . . . . . . 535188-5257 .. . . . . . . . . . . . . . . . . . 536188-5258 .. . . . . . . . . . . . . . . . . . 536188-5261 .. . . . . . . . . . . . . . . . . . 536188-5262 .. . . . . . . . . . . . . . . . . . 536188-5263 .. . . . . . . . . . . . 535, 690188-5264 .. . . . . . . . . . . . . . . . . . 535188-5268 .. . . . . . . . . . . . . . . . . . 536188-5270 .. . . . . . . . . . . . . . . . . . 533188-5271 .. . . . . . . . . . . . . . . . . . 534188-5272 .. . . . . . . . . . . . 534, 683188-5310 .. . . . . . . . . . . . . . . . . . 372

188-5311 .. . . . . . . . . . . . . . . . . . 375188-5312 .. . . . . . . . . . . . . . . . . . 375188-5313 .. . . . . . . . . . . . . . . . . . 375188-5314 .. . . . . . . . . . . . . . . . . . 375188-5333 .. . . . . . 362, 490, 535188-5334 .. . . . . . . . . . . . 362, 535188-5381 .. . . . . . . . . . . . . . . . . . 533188-5383 .. . . . . . 534, 679, 691188-5385 .. . . . . . . . . . . . . . . . . . 533188-5387 .. . . . . . . . . . . . . . . . . . 534188-5396 .. . . . . . . . . . . . . . . . . . 533188-5397 .. . . . . . 533, 679, 691188-5527 .. . . . . . . . . . . . . . . . . . 532188-5531 .. . . . . . . . . . . . . . . . . . 372188-5532 .. . . . . . . . . . . . . . . . . . 372188-5588 .. . . . . . . . . . . . . . . . . . 532188-5590 .. . . . . . 534, 681, 695188-5591 .. . . . . . . . . . . . . . . . . . 533188-5592 .. . . . . . . . . . . . . . . . . . 533188-5593 .. . . . . . 533, 679, 691188-5594 .. . . . . . . . . . . . . . . . . . 533188-5595 .. . . . . . . . . . . . . . . . . . 535188-5596 .. . . . . . . . . . . . 536, 697188-5597 .. . . . . . . . . . . . . . . . . . 536188-5600 .. . . . . . . . . . . . 536, 694188-5601 .. . . . . . 362, 490, 535188-5602 .. . . . . . . . . . . . 362, 535188-5603 .. . . . . . 362, 490, 535188-5604 .. . . . . . 362, 490, 535188-5605 .. . . . . . . . . . . . 362, 535188-5606 .. . . . . . . . . . . . 362, 535188-5607 .. . . . . . . . . . . . . . . . . . 380188-5608 .. . . . . . . . . . . . . . . . . . 380188-5610 .. . . . . . . . . . . . . . . . . . 377188-5612 .. . . . . . . . . . . . . . . . . . 379188-5613 .. . . . . . . . . . . . . . . . . . 375188-5614 .. . . . . . . . . . . . . . . . . . 375188-5615 .. . . . . . . . . . . . . . . . . . 375188-5616 .. . . . . . . . . . . . . . . . . . 375188-5617 .. . . . . . . . . . . . . . . . . . 375188-5618 .. . . . . . . . . . . . . . . . . . 375188-5633 .. . . . . 532–533, 665,

678, 701188-5634 .. . . . . . . . . . . . 532–533188-5635 .. . . . . . . . . . . . . . . . . . 534188-5636 .. . . . . . . . . . . . 535, 688188-5637 .. . . . . . . . . . . . . . . . . . 535188-5638 .. . . . . . . . . . . . . . . . . . 536188-5639 .. . . . . . . . . . . . 372–373188-5640 .. . . . . . . . . . . . 372–373188-5641 .. . . . . . . . . . . . 376–377188-5658 .. . . . . . . . . . . . . . . . . . 372188-5679 .. . . . . . . . . . . . . . . . . . 532188-5689 .. . . . . . . . . . . . . . . . . . 372188-5693 .. . . . . . . . . . . . . . . . . . 532188-5694 .. . . . . . . . . . . . . . . . . . 532

188-5698 .. . . . . . . . . . . . . . . . . . 535188-5699 .. . . . . . . . . . . . . . . . . . 535188-5700 .. . . . . . . . . . . . . . . . . . 535188-5701 .. . . . . . . . . . . . . . . . . . 535188-5710 .. . . . . . . . . . . . . . . . . . 372188-5711 .. . . . . . . . . . . . . . . . . . 372188-5712 .. . . . . . . . . . . . . . . . . . 372188-5721 .. . . . . . . . . . . . . . . . . . 535188-5765 .. . . . . . . . . . . . . . . . . . 530188-5773 .. . . . . . . . . . . . . . . . . . 529188-5856 .. . . . . 532–533, 535,

665, 678, 688, 701188-5857 .. . . . . . . . . . . . 372–373188-6246 . 238, 240, 396, 526189-0475 .. . . . . . . . . . . . . . . . . . 615189-0794 .. . . . . . . . . . . . . . . . . . 615189-2164 .. . . . . . . . . . . . . . . 45, 50189-2165 .. . . . . . . . . . . . . . . 45, 50189-2170 .. . . . . . . . . . . . . . . 45, 50189-2171 .. . . . . . . . . . . . . . . 45, 50189-3032 .. . . . . . . . . . . . . . . 92–94189-3861 .. . . . . . . . . . . . . . . . . . 606189-3862 .. . . . . . . . . . . . . . . . . . 606189-3987 .. . . . . . . . . . . . . . . . . . 625190-1534 .. . . . . . . 13, 219–220190-1536 .. . . . . . . . . 13, 17, 219190-1546 .. . .46–47, 229–230190-1547 .. . . . . . . . . 46, 50, 229190-1551 .. . .13–14, 820–821190-2495 .. . . . . 13–14, 17–18,

820–821190-3523 .. . . . . 537, 546–547,

550–551, 554–555,559–560, 572–574,

727190-3524 .. . . . . 537, 546–547,

550–551, 554–555,559–560, 572–574,

727190-7396 .. . . . . . . . . . . . 246, 401191-0921 .. . . . . . . . . . . . . . . . . . 142191-2028 .. . . . . . . . . . . . . . . . . . 498191-2029 .. . . . . . . . . . . . . . . . . . 498191-9917 .. . . . . . . . . . . . . . . . . . 142192-0213 . 117, 119, 125, 307192-0219 .. . . . . . . . . . . . 117, 121192-0220 .. . . . . . . . . . . . . . . . . . 117192-0223 .. . . . . . 119, 123, 306192-0224 .. . . . . . . . . . . . 118–119192-0811 .. . . . . . . . . . . . . . . . . . 125192-2549 .. . . . . . . . . . . . . . . . . . 498192-2550 .. . . . . . . . . . . . . . . . . . 498192-3184 .. . . . . . . . . . . . . . . . . . 448192-3185 .. . . . . . . . . . . . . . . . . . 446192-8303 .. . . . . . . . . . . . . . . . . . 605192-8358 .. . . . . . . . . . . . 605–606

192-8458 ... . . . . . . . . . . 583, 595192-8459 ... . . . . . . . . . . 583, 595192-8460 ... . . . . . . . . . . 583, 595193-1718 ... . . . . . . . . . . . . . . . . 610193-7070 ... . . . . . . . . . . . . . . . . 769193-7091 ... . . . . . . . . . . . . . . . . 767194-1130 ... . . . . . . . . . . . . . . . . 578194-1131 ... . . . . . . . . . . . . . . . . 578194-1133 ... . . . . . . . . . . . . . . . . 546194-1134 ... . . . . . . . . . . 546, 550194-1150 ... . . . . . . . . . . . . . . . . 783194-1155 ... . . . . . . . . . . . . . . . . 624194-1156 ... . . . . . . . . . . . . . . . . 624194-1608 ... . . . . 537, 554, 559194-1609 . 537, 550, 555, 559195-9343 ... . . . . . . . . . . . . . . . . 572195-9344 ... . . . . . . . . . . . . . . . . 574196-1232 ... . . . . . . . . . . . . . . . . . .72196-1233 ... . . . . . . . . . . . . . . . . . .72196-1234 ... . . . . . . . . . . . . . . . . . .72196-1235 ... . . . . . . . . . . . . . . . . . .72196-1236 ... . . . . . . . 72–73, 346196-1237 ... . . . . . . . . . . . .73, 346196-1712 ... . . . . . . . . . . . . . . . . . .23196-4083 ... . . . . . . . . . . . . . . . . 753196-4404 ... . . . . . . . . . . . . . . . . 244196-4405 ... . . . . . . . . . . . . . . . . 244196-4672 ... . . . . . . . . . . 438–439196-7074 ... . . . . . . . . . . . . . . . . . .54196-7078 ... . . . . . . . . . . . . . . . . . .54196-7111 ... . . . . . . . . . . . . . 21, 23196-7112 ... . . . . . . . . . . . . . . . . . .21196-7113 ... . . . . . . . . . . . . . 21, 23196-7114 ... . . . . . . . . . . . . . 21, 23196-7839 ... . . . . . . . . . . . . . . . . . .72196-9954 ... . . . . . . . . . . 169–170196-9955 ... . . . . . . . . . . 168–170196-9956 ... . . . . . . . . . . . . . . . . 169196-9957 ... . . . . . . . . . . . . . . . . 169197-4161 ... . . . . 581, 747–748197-7752 ... . . . . . . . . . . 121, 123197-7753 ... . . . . . . . . . . 121, 123197-7754 ... . . . . . . . . . . . . . . . . 121197-9672 ... . . . . . . . . . . . . . . . . 438197-9673 ... . . . . . . . . . . . . . . . . 470197-9674 ... . . . 296, 299, 302,

438–439197-9677 ... . . . . 278, 409–410197-9678 ... . . . . 278, 409–410197-9679 ... . . . . 363, 490, 507198-1125 . 575, 588–589, 749198-3378 ... . . . . . . . . . . . . . . . . 294198-4778 ... 16, 47, 268–269,

291–292, 297–298198-4780 ... . . . . . . . . . . . . . . . . 309198-5596 ... . . . . . . . . . . . . . . . . 583

Part Number Index


889

198-5597 ... . . . . . . . . . . . . . . . . 583198-6093 ... . . . . . . . . . . . . . . . . 265198-6094 ... . . . . . . . . . . . . . . . . 265198-6703 ... . . . . . . . . . . 154–155198-6704 ... . . . . . . . . . . . . . . . . 154198-6726 ... . . . . . . . . . . . . . . . . 123198-6859 ... . . . . . . . . . . . . . . . . 155198-6987 ... . . . . . . . . . . . . . . . . 244198-6988 ... . . . . . . . . . . . . . . . . 244198-6989 ... . . . . . . . . . . . . . . . . 244198-6990 ... . . . . . . . . . . . . . . . . 244198-6991 ... . . . . . . . . . . . . . . . . 244198-6992 ... . . . . . . . . . . . . . . . . 244198-7309 ... . . . . . . . . . . 184–185198-9059 ... . . . . . . . . . . . . . . . . 498199-2794 ... . . . 113–114, 139,

158, 357, 484–485,502

199-4501 ... . . . . . . . . . . . . . . . . 624199-5332 ... . . . . . . . . . . 802, 807199-5333 ... . . . . . . . . . . 802, 807199-5370 ... . . . . . . . . . . . . . . . . 803199-5428 ... . . . . . . . . . . 803, 805199-5429 ... . . . . . . . . . . 803, 806199-5432 ... . . . . . . . . . . 803, 805199-5522 ... . . . . . . . . . . . . . . . . 165199-5523 ... . . . . . . . . . . . . . . . . 165199-5525 ... . . . . . . . . . . . . . . . . 164199-5531 ... . . . . . . . . . . . . . . . . 165199-5532 ... . . . . . . . . . . 172–173199-5534 ... . . . . . . . . . . 172–173199-9928 . 803, 805, 808–8091A-0168 .. . . . . . . . . . . . . . . . . . . 7921A-0458 .. . . . . . . . . . . . . . . . . . . 5001A-1135 . 319, 334, 421, 427,

662, 675–676, 8271A-1460 .. . . . . . . . . . . . . 520, 8031A-2029 .. 316, 353, 418, 6981A-5666 .. . . . . . . . . . . . . . . . . . . 6641A-8063 .. . . . .24–25, 29, 675,

685, 6991A-8537 .. .20, 220, 282–283,

334, 353, 411, 425,461, 517, 534, 684,

8231A-8651 .. 14–15, 17–18, 47,

51, 219, 2301B-2706 .. 797, 801, 803, 8061B-3867 .. . . . . . . 761, 768–7701B-4206 .. . . . . . . . . . . . . . . . . . . 3341B-4207 .. . . . . . . . . . . . . . . . . . . 6761B-4367 . 20–21, 52–53, 221,

233, 283, 334, 412,426, 446

1D-4585 .. .52, 334, 351, 461,683, 698

1D-4586 ... . . . . . . . . . . . . . . . . . 3711D-4593 ... . . . . . . . . . . . . . . . . . . .161D-4608 ...90, 352, 356, 464,

476, 478, 534, 683–684

1D-4609 .. 368, 500, 515, 5361D-4610 ... . 88–90, 231, 233,

351, 460, 475, 477,682

1D-4614 ... . . . . . . . . . . . . . . . . . 2291D-4615 ... . . . . .78–84, 86–871D-4617 ... . . . . . . . . . . . . . . . . . . .771D-4625 ... . . . . . . . . . . . . . . . . . 3921D-4628 ... . . . . . . . . . . . . . . . . . 5001D-4629 . 366, 494, 496, 514,

5361D-4630 . 130, 381–383, 392,

522–523, 7091D-4631 ... . . . . . . . . . . . . . . . . . 6961D-4634 . 117–118, 121–122,

126–127, 1291D-4635 ... . . . . . . . . . . . . . . . . . 6991D-4637 ... . . . . . . . . . . . . . . . . . 7101D-4639 ... . . . . . . . . . . . 190, 7081D-4640 ... . . . . . 381–382, 3911D-4642 ... . . . . . . . . . . . . . . . . . 1611D-5976 . 119–120, 123–124,

1281D–4630... . . . . . . . . . . . . . . . . . 1301F-7958 .. . . . . . . . . . . . . . . . . . . . 2681G-5515 ... . . . . . . . . . . . . . . . . . 8371G-5516 ... . . . . . . . . . . . . . . . . . 8371G-6133 ... . . . . . . . . . . . . . . . . . 8201H-5728 ... . . . . 378–380, 471,

520–521, 578, 672–673, 692, 706–708

1H-6227 ..21, 207, 221, 230–231, 283, 329–330,332, 348–349, 354,412, 426, 430, 432,439–442, 445, 458–459, 462, 471–472,

669, 674, 6931H-7339 . 381, 601–602, 682,

754, 7571H-8128 ... . . .44–46, 50, 229,

280, 316–319, 418–420, 424, 426, 659,662, 670, 674, 822,

8271H-8397 ... . . . . . 640, 646, 6521H-8720 ... . . . . 365, 443, 474,

511–512, 6941H-9696 ...19, 247–250, 282,

319, 331, 350, 402–403, 411, 420, 425,

431, 443, 460, 474,513, 641, 647, 653,659–661, 671, 681,695, 827, 830, 834,

8381J-4034.. 829–830, 833–834,

837–8381K-3478. . . . . . . . . . . . . . . . . . . . . 4821K-6872. . 792, 797, 802, 804,

807, 8091K-7183. . . . . . . . . . . . . . . 500–5011L-5072 .. . . . 21, 53, 220, 232,

283, 412, 425, 4451M-1408..7–12, 38–40, 216–

218, 225–227, 273–274, 276–277, 310–312, 323–328, 343–345, 407–409, 415–416, 422–423, 428–429, 434, 437, 456–457, 505–506, 529–530, 637–638, 643–644, 649–650, 655–656, 666–667, 820,

8261M-1455... . . . . 372, 374, 519,

614, 7021M-3097...19, 206, 230–231,

250, 280, 282, 315–319, 329–332, 348–350, 354, 403, 410–411, 418–420, 424–426, 430–432, 439–442, 445, 459, 462,569, 592, 602, 640,647, 653, 659–662,669, 671, 674, 822,827, 830, 834, 838

1M-3121... . . . . . 329–330, 3491M-3669... . . . 359, 361, 488–

489, 503, 686, 6891M-3670... . . . . . 488, 686, 6891M-7749... . . . . . . . . . . . . . . . . . 3211M-7750... . . . . . . . . . . . . . . . . . 3211M-7795... . . . . . . . . . . . . . . . . . 3211M-7796... . . . . . . . . . . . . . . . . . 3211M-7911... . . . . . 331, 349, 4311M-7912... . . . . . 331, 349, 4311M-7913... . . . . 331, 349–350,

431, 4741M-7914...19, 250, 282, 318,

331, 349–350, 403,411, 420, 424, 431,443, 460, 474, 512,640, 646, 652, 660–

661, 671, 681, 695,827, 830, 834, 838

1M-7915.. . . . . . . 331, 349, 4311M-7916.. 331, 349–350, 4311M-7918.. .19, 250, 282, 318,

331, 403, 411, 420,424, 431, 640, 646,653, 660–661, 671,827, 830, 834, 838

1M-8735.. .19, 318, 403, 411,420, 424, 640, 646,652, 660, 671, 827,

830, 834, 8381M-8736.. .19, 318, 403, 410,

419, 424, 640, 646,652, 660, 671, 827,

830, 834, 8381M-8746.. . . . . . . . . . . . . . . . . . . 4021M-8747.. . . . . . . 353, 471, 6981M-8863.. . . . . . . . . . . . . . . . . . . 3171M-8864.. . . . . . . . . . . . . . . . . . . 3171M-8867..315–317, 418–4191M-9011.. . . . . . . . . . . . . 628, 6331N-9701 .. . . . . . . . . . . . . . . . . . . 6681P-0963. .. . . . . . . . . . . . . 356, 4641P-1578. .. . . . . . . . . . . . . . . . . . . 3301P-2636. .. . . . . . . . . . . . . . . . . . . 3891P-2662. .. . . . . . . . . . . . . . . . . . . 3891P-8715. .. . . . . . . 364, 511, 6941P-8716. .. . . . . . . 364, 511, 6941P-8717. .. 364, 511, 536, 6941P-8787. .. . . . . . 366–368, 496,

513–515, 6971P-8851. .. . . . . . . . . . . . . . . . . . . 5171P-8852. .. . . . . . . . . . . . . . . . . . . 5171P-9807. .. . . . . . . . . . . . . . . . . . . 5351P-9808. .. . . . . . . . . . . . . . . . . . . 5351P-9809. .. . . . . . . . . . . . . . . . . . . 5351P-9810. .. . . . . . . . . . . . . . . . . . . 5351Q-4604 .. . . . . . . . . . . . . . . . . . . 4891Q-4607 .. . . . . . . . . . . . . . . . . . . . .711Q-4609 .. . . . . . . . . . . . . . . . . . . 4701Q-4610 .. . . . . . . . . . . . . . . . . . . 4701Q-4621 .. . . . . . . . . . . . . . . . . . . 1421Q-4625 .. . . . . . . . . . . . . . . . . . . . .711Q-4626 .. . . . . . . . . . . . . . . . . . . . .711Q-4640 .. . . . . . . . . . . . . . . . . . . 4701Q-4641 .. . . . . . . . . . . . . . . . . . . 4701Q-4649 .. . . . . . . . . . . . . . . . . . . 1661Q-4651 .. . . . . . . . . . . . . . . . . . . 1811Q-4669 .. . . . . . . . . . . . . 116, 4891Q-4717 .. . . . . . . . . . . . . . . . . . . 6791Q-4718 .. . . . . . . . . . . . . . . . . . . 6791Q-4728 .. . . . . . . . . . . . . . . . . . . . .711Q-4729 .. . . . . . . . . . . . . . . . . . . . .711Q-4744 .. . . . . . . . . . . . . . . . . . . . .72

890

Part Number Index


1Q-4745 .. . . . . . . . . . . . . . . . . . . . .721Q-4752 .. . . . . . . . . . . . . . . . . . . 5891Q-4754 .. . . . . . . . . . . . . . . . . . . . .131Q-4755 .. . . . . . . . . . . . . . . . . . . 1661Q-4772 .. . . . . . . . . . . . . 561, 5761Q-4774 .. . . . . . . . . . . . . . . . . . . 6141Q-4921 .. . . . . . . . . . . . . 346, 4701Q-4922 .. . . . . . . . . . . . . 346, 4701Q-4924 .. . . . . . . . . . . . . . . . . . . . .711Q-4926 .. . . . . . . . . . . . . . . . . . . . .711Q-4930 .. . . . . . . . . . . . . . . . . . . . .711Q-4935 .. . . . . . . . . . . . . . . . . . . . .711Q-4958 .. . . . . . . . . . . . . . . . . . . . .711Q-4964 .. . . . . . . . . . . . . 116, 4891Q-4965 .. . . . . . . . . . . . . 116, 4891Q-4973 .. . . . . . . . . . . . . . . . . . . . .711Q-4984 .. . . . . . . . .72, 345, 4701Q-4985 .. . . . . . . . .72, 345, 4701Q-4994 .. . . . . . . . . . . . . . . . . . . . .711Q-4995 .. . . . . . . . . . . . . . . . . . . . .711Q-4996 .. . . . . . . . . . . . . . . . . . . . .711Q-4997 .. . . . . . . . . . . . . . . . . . . . .711R-1124. .. . . . . . . . . . . . . . . . . . . 8401R-1198. .. . . . . . . . . . . . . . . . . . . 8401R-1317. .. . . . . . . . . . . . . . . . . . . 8401R-5440. .. . . . . . . . . . . . . . . . . . . 7111R-6008. .. . . . . . . . . . . . . 543, 7161R-6009. .. . . . . . . . . . . . . 543, 7161R-6010. .. . . . . . . . . . . . . 543, 7161R-6011. .. . . . . . . . . . . . . 543, 7161R-8938. .. . . . . . . . . . . . . . . . . . . 7121R-8939. .. . . . . . . . . . . . . . . . . . . 7121R-9507. .. . . . . . . . . . . . . 711, 7831R-9814. .. . . . . . . . . . . . . . . . . . . 5431R-9833. .. . . . . . . . . . . . . . . . . . . 7371S-0454. .. . . . . . . 385, 393, 5231S-1859. .. .67, 336–341, 361,

451–455, 466–469,505, 532–533, 665,

677–679, 6901S-1860. .. .33, 35–37, 41, 64,

66–69, 114, 204–205, 209–210, 224,226, 302, 336–342,357–361, 375, 435–436, 451–455, 466–469, 486–487, 489,502–505, 532–533,535, 561, 575, 589,665, 677–679, 688–690, 744, 749–750

1S-1863. .. . . . . . . . . . . . . 361, 5041S-1864. .. . . . . . . . . . . . . 361, 5041S-2174. .. . . . . . . 493, 511, 6941S-3511. .. . . . . . . . . . . . . . . . . . . 3891S-3512. .. . . . . . . . . . . . . . . . . . . 389

1S-3513. .. . . . . . 378–379, 520,705–706

1S-3514. .. . . . . . . . . . . . . . . . . . . 3891S-4445. .. . . . . . . 619, 623, 7021S-4446. .. 387, 619, 623, 7021S-4467. .. . . . . . . . . . . . . . . . . . . 3491S-4468. .. . . . . . . . . . . . . . . . . . . 3491S-6421. ..386–387, 702–7031S-6943. .. . . . . . . . . . . . . 361, 5041S-7408. .. . . . . . . . . . . . . . . . . . . 6291S-8186. .. . . . . . . 508–510, 5361S-8725. .. . . . . . . . . . . . . 376–3771S-8839. .. . . . . . . . . . . . . . . . . . . 3751S-8840. .. . . . . . . . . . . . . . . . . . . 3751S-8947. ..19, 152, 282, 316–

319, 329–331, 348,350, 364–365, 378–380, 382, 389–391,411, 419–420, 425,431, 439–443, 460,474, 509–513, 520–521, 628, 632, 635,641, 647, 653, 660,671–672, 680–681,692–695, 706–708,

8271T-0068 ... . . . . . . 381, 390–3911T-0720 ... . . . . . . . . . . . . . . . . . . 1281T-0765 ... .74, 79, 81, 83, 85,

2111V-3361... . . . . . 277, 310, 415,

422–4231V-4266... . . . . . . . . . . . . . . . . . . 3211V-4267... . . . . . . . . . . . . . . . . . . 3211V-4268... . . . . . . . . . . . . . . . . . . 3211V-4269... . . . . . . . . . . . . . . . . . . 3211V-4603... 276, 310, 415, 4221V-4604.. 276, 310–311, 415,

4221V-4605.. 276, 310–311, 415,

4221V-4606.. 276, 310–311, 415,

4221V-5090... . . . . . . . . . . . . . . . . . . 3141V-5091... . . . . . . . . . . . . . . . . . . 3141V-5092... . . . . . . . . . . . . . . . . . . 3141V-5431... . . . . . . . . . . . . . . . . . . 7101V-5433... . . . . . . . . . . . . . . . . . . 7101V-7069... . . . . . . . . . . . . 314, 6581V-7072... . . . . . . . . . . . . 310–3111V-7074... . . . . . . . . . . . . . . . . . . 4151V-7075... . . . . . . . . . . . . 310–3111V-7077... . . . . . . . . . . . . . . . . . . 4561V-8173... . . . . . . . . . . . . . . . . . . 4631V-8176... . . . . . . . . . . . . . . . . . . 4631V-8187... . . . . . . . . . . . . . . . . . . 463

1V-8202.. . . . . . . . . . . . . . . . . . . . 4631V-8623.. . . . . . . 311–312, 416,

637–638, 643, 649–650, 655–656, 667

1V-9611.. 280, 315–319, 410,418–420, 424, 426,659, 662, 670, 674,

822, 8271Z-9353.. . . . . . . . 157, 163, 170200-0809 .. . . . . . . . . . . . 803, 806200-0996 .. . . . . . . . . . . . 802, 807200-4074 .. . . . . . . . . . . . . . . . . . 142200-4197 .. . . . . . . . . . . . 577, 590200-4274 .. . . . . . . . . . . . . . . . . . 750200-4275 .. . . . . . . . . . . . . . . . . . 750200-5701 .. . . . . . . . . . . . . . . . . . 199200-5702 .. . . . . . . . . . . . . . . . . . 199200-6325 .. . . . . . . . . . . . . . . . . . 194200-6326 .. . . . . . . . . . . . . . . . . . 194200-6432 .. . . . . . . . . . . . 581, 747200-6493 .. . . . . . . . . . . . . . . . . . . .72200-6494 .. . . . . . . . . . . . . . . . . . . .72200-6495 .. . . . . . . . . . . . . . . . . . . .72200-6496 .. . . . . . . . . . . . . . . . . . . .72200-6497 .. . . . . . . . . . . . . . . . . . . .72200-6498 .. . . . . . . . . . . . . . . . . . . .72200-9127 .. . . . . . . . . . . . . . . . . . 537200-9133 .. . . . . . . . . . . . 529–530200-9150 .. . . . . 529–530, 638,

650, 656–657, 667–668

200-9185 .. . . . . . . . . . . . . . . . . . 531200-9235 .. . . . . . . . . . . . . . . . . . 531200-9236 .. . . . . . . . . . . . . . . . . . 534200-9237 .. . . . . . . . . . . . . . . . . . 536200-9238 .. . . . . . . . . . . . . . . . . . 377201-0826 .. . . . . 567–568, 576,

584–588201-0828 .. . . . . . 596–598, 753201-1704 .. . . . . . . . . . . . . . . . . . 624201-2775 .. . . . . . . . . . . . 605–606201-2776 .. . . . . . . . . . . . 605–606201-9116 .. . . . . . . . . . . . 567, 585201-9117 .. . . . . . . . . . . . 576, 586201-9118 .. . . . . . . . . . . . . . . . . . 596201-9119 .. . . . . . . . . . . . . . . . . . 596202-2404 .. . . . . . . . . . . . . . . . . . 211202-4295 .. . . . . . . . . 81–86, 211202-4296 .. . . . . . . . . . 81, 83–86202-4303 .. 77–78, 80, 85–86202-4304 .. . . . . .78–79, 85–86203-0306 .. . . . . . . . . . . . . . . . . . 210203-0944 .. . . . . . . . . . . . . . . . . . 173203-4604 .. . . . . . . . . . . . . . . . . . 252203-6580 .. . . . . . . . . . . . . . . . . . 211203-7987 .. . . . . . . . . . . . . . . . . . 211

203-8040 ... . . . . . . . . . . . . . . . . 132204-0365 ... . . . . . . . . . . . . . . . . 298204-1371 ... . . . . 803–806, 808204-1375 ... . . . . . . . . . . 803, 805204-6365 .24–26, 28–30, 55–

56, 58–59, 297–298,301, 304

204-7266 ... . . . . . . . . . . . . . . . . . .50204-9748 ... . . . . . . . . . . . . . . . . 173205-0709 ... . . . . . . . . . . . . . . . . . .79205-3594 ... . . . . . . . . . . 581, 747205-6140 ... . . . . . . . 24–26, 304205-6141 ... . . . . . . . . . . . . . 55–56205-6142 ... . . . . . . . . . . . . . . . . . .26205-6143 ... . . . . . . . . . . . . . . . . . .26205-6155 ... . . . . . . . . . . . . . . . . . .30205-6157 ... . . . . . . . . . . . . . . . . . .30205-6158 ... . . . . . . . . . . . . . . . . . .26205-6159 ... . . . . . . . . . . . . . . . . . .26205-6164 ... . . . . . . . . . . . . . . . . . .59206-1262 . 580, 592, 747, 751206-1263 ... . . . 580, 592, 747,

751–752206-1264 ... . . . 579–580, 592,

746–747, 751–752206-1265 . 548, 552, 558, 565206-1469 ... . . . . . . . . . . 561, 744206-1470 ... . . . . . . . . . . 561, 744206-1476 ... . . . . . . . . . . . . . . . . 745206-1477 ... . . . . . . . . . . . . . . . . 745206-1479 ... . . . . . . . . . . 562, 745206-1480 ... . . . . . . . . . . 562, 745206-1895 .. 77–78, 80, 86–87206-1897 ... . . . . . . . . 82, 84–87206-2087 ... . . . . . . . . . . 211–212206-3065 ... . . . . . . . . . . . . . . . . 745206-3128 ... . . . . . . . . . . . . . . . . 397206-3502 ... . . . . . . . . . . . . . . . . 315206-3504 ... . . . . . . . . . . . . . . . . 314206-3505 ... . . . . . . . . . . . . . . . . 314206-3506 ... . . . . . . . . . . . . . . . . 314206-3507 ... . . . . . . . . . . 314, 418206-3509 ... . . . . . . . . . . . . . . . . 314206-3510 ... . . . . . . . . . . 278, 314206-3511 ... . . . . . . . . . . 278, 314206-3512 ... . . . . . . . . . . . . . . . . 314206-3514 ... . . . . . . . . . . . . . . . . 314206-3515 ... . . . . . . . . . . 314, 418206-3517 ... . . . . . . . . . . . . . . . . 314206-3518 ... . . . . . . . . . . 278, 314206-3519 ... . . . . . . . . . . 278, 314206-3520 ... . . . . . . . . . . . . . . . . 314206-3522 ... . . . . . . . . . . . . . . . . 314206-3812 ... . . . . . . . . . . . . . . . . 795206-6004 ... . . . . . . . . . . . . . . . . 610206-6049 ... . . . . . . . . . . . . . . . . 614

Part Number Index


891

206-6050 ... . . . . . . . . . . . . . . . . 619206-8837 ... . . . . . . . . . . . . . . . . 107206-8961 ... . . . . . . . . . . . . . . . . 565206-9212 ... . . . 579–581, 592,

747–748, 752206-9257 ... . . . 570, 579–580,

592, 747, 751206-9260 ... . . . 579–580, 592,

747, 751207-0469 ... . . . . . . . . . . . . . . . . 751207-0472 ... . . . . . . . . . . . . . . . . 751207-0476 ... . . . . . . . . . . . . . . . . 752207-0544 ... .64, 66–68, 209–

210, 336, 341, 451,466–467, 575, 589,

749–750207-0545 .164–165, 172–173207-3658 ... . . . . . . . . . . . . . . . . 751207-4873 ... . . . . . . . . . . 562, 745207-4874 ... . . . . . . . . . . 562, 745207-5283 ... . . . . . . . . . . 590, 750207-5284 ... . . . . . . . . . . 590, 750207-5897 ... . . . . . . . . . . 590, 750207-5898 ... . . . . . . . . . . 590, 750207-6061 ... . . . . . . . . . . . . . . . . 631207-8167 ... . . . . . . . . . . . . . . . . 593208-0763 ... . . . . . . . . . . . . . . . . 446208-0764 ... . . . . . . . . . . . . . . . . 446208-1508 ... . . . . . . . . . . . . . . . . . .65209-4535 ... . . . . . . . . . . 590, 750209-4536 ... . . . . . . . . . . 590, 750209-4539 ... . . . . . . . . . . . . . . . . 590209-4540 ... . . . . . . . . . . . . . . . . 590209-4541 ... . . . . . . . . . . . . . . . . 181209-4542 ... . . . . . . . . . . . . . . . . 181210-4647 ... . . . . . . . . . . . . . . . . 792210-4693 ... . . . . . . . . . . . . . . . . 808211-3295 ... . . . . . . . . . . . . . . . . 609211-9843 ... . . . . . . . . . . . . . . . . 600212-4205 ... . . . . . . . . . . . . . . . . 439212-4206 ... . . . . . . . . . . . . . . . . 439212-5118 ... . . . . . . . . . . . . . . . . 766212-5129 ... . . . . . . . . . . 773–774212-6559 ... . . . . . . . . . . 794–796212-6628 ... . . . . . . . . . . . . . . . . 795212-6681 ... . . . . . . . . . . 794–796212-6682 ... . . . . . . . . . . . . . . . . 795213-1932 ... . . . . . . . . . . . . . . . . 588213-1933 ... . . . . . . . . . . 567, 587213-1971 ... . . . . . . . . . . . . . . . . 598213-1972 ... . . . . . . . . . . . . . . . . 598213-1975 ... . . . . . . . . . . . . . . . . 753214-3529 ... . . . . . . . . . . . . . . . . 610215-1574 ... . . . . . . . . . . . . . . . . 297215-2986 ... . . . . . . . . . . . . . . . . 600215-2991 ... . . . . . . . . . . . . . . . . 600

215-3956 .. . . . . . . . . . . . . . . . . . 795215-4006 .. . . . . . . . . . . . 794, 796215-7492 .. . . . . . 191–192, 194216-2956 .. . . . . 248, 251–254,

403, 659, 663, 825,831, 835

216-2957 .. . . . . 248, 251–254,403, 659, 663, 825,

831, 835216-3442 .. . . . . . . . . . . . 812, 815216-6148 .. . . . . . . . . . . . 794, 796216-6149 .. . . . . . . . . . . . 794–796216-6286 .. . . . . . . . . . . . . .13, 277218-0048 .. . . . . . . . . . . . . . . . . . 498218-0049 .. . . . . . . . . . . . . . . . . . 498218-0050 .. . . . . . . . . . . . . . . . . . 498218-0051 .. . . . . . . . . . . . . . . . . . 498218-3274 .. . . . . . . . . . . . . . . 6, 275218-3387 .. . . . . . . . . . . . . . . . . . . .71218-3388 .. . . . . . . . . . . . . . . . . . . .71218-4993 ..19, 296–297, 300,

303218-5073 .. . . . . . . . . . . . . . . . . . 632218-5404 .. . . . . . . . . . . . . . . . . . 607218-5405 .. . . . . . . . . . . . . . . . . . 607218-5439 .. . . . . . . . . . . . . . . . . . 607218-5485 .. . . . . . . . . . . . . . . . . . 545218-5486 .. . . . . . . . . . . . . . . . . . 545219-4302 .. . . . . . . . . . . . 794, 796219-8212 .. . . . . . . . . . . . . . . . . . 606219-8227 .. . . . . . . . . . . . . . . . . . 606219-8238 .. . . . . . . . . . . . . . . . . . 583219-8468 .. . . . . . . . . . . . 565–566219-8469 .. . . . . . . . . . . . 565–566220-8161 .. . . . . . . . . . . . . . . . . . 807221-0010 .. . . . . . . . . . . . . . . . . . 563221-0011 .. . . . . . . . . . . . . . . . . . 246221-0012 .. . . . . . . . . . . . . . . . . . 246222-1779 .. . . . . . . . . . . . . . . . . . 624222-1796 .. . . . . . . . . . . . . . . . . . . .42222-1797 .. . . . . . . . . . . . . . . . . . . .42222-2265 .. . . . . . . . . . . . . . . . . . 828222-3058 .. . . . . . . . . . . . 832, 836222-3595 .. . . . . . . . . . . . . . . . . . 583222-5682 .. . . . . . . . . . . . . . . . . . 809222-5683 .. . . . . . . . . . . . . . . . . . 809222-5684 .. . . . . . . . . . . . . . . . . . 809222-5686 .. . . . . . . . . . . . . . . . . . 808222-5687 .. . . . . . . . . . . . . . . . . . 808222-6998 .. . . . . . . . . . . . . . . . . . 487222-7001 . 178–180, 188, 627222-7007 . 191–192, 194, 631222-7244 .. . . . . . . . . . . . . . . . . . 307223-1617 .. . . . . . . . . . . . . . . . . . 158223-1618 .. . . . . . . . . . . . . . . . . . 158223-8372 .. . . . . . . . . . . . 804, 809

223-8396 .. . . . . . . . . . . . . . . . . . 794223-8397 .. . . . . . . . . . . . . . . . . . 794223-8398 .. . . . . . . . . . . . . . . . . . 796223-8399 .. . . . . . . . . . . . . . . . . . 796223-9110 .. . . . . . . . . 51–52, 444224-3959 .. . 9, 217, 273–274,

407224-5918 .. . . . . . . . . . . . . . . . . . 198224-7269 .. . . . . . . . . . . . 562, 745224-7270 .. . . . . . . . . . . . . . . . . . 562224-7732 .. . . . . . . . . . . . 562, 745224-7733 .. . . . . . . . . . . . . . . . . . 562224-9407 .. . . . . . . . . . . . . . . . . . 795224-9409 .. . . . . . . . . . . . 794, 796224-9862 .. . . . . . . . . . . . . . . . . . 576225-7650 .. . . . . . . . . . . . . . . . . . 251226-0268 .. . . . . . . . . . . . . . . . . . 181226-0269 .. . . . . . . . . . . . . . . . . . 181226-4049 .. . . . . . . . . . . . . . . . . . 761226-5101 .. . . . . . . . . . . . 583, 595226-5103 .. . . . . . . . . . . . . . . . . . 607226-5369 .. . . . . . . . . . . . 566, 582227-3029 . 599, 608–609, 756227-5971 .. . . . . . . . . . . . . . . . . . . .18227-6360 .. . . . . . . . . . . . . . . . . . . .43227-9954 .. . 9, 217, 273, 275,

407227-9960 .. . . . . . 274–276, 407227-9976 .. . . . . . . . . 9, 274–276228-2735 ..67, 336, 338–339,

451–453, 466–467,677

228-2736 ..67, 336, 338–339,451–453, 466–467,

677228-2737 .67, 336–337, 451–

452, 466–467228-2738 .67, 336–337, 451–

452, 466–467228-2739 .67, 336–337, 451–

452, 466–467228-2740 .67, 336, 338, 451–

452, 466–467228-2743 .. . . . . . . . . . . . . . . . . . . . . 9228-2744 .. . . . . . . . . 9, 216–218228-3711 .. . . . . . . . . . . . . . . . . . . .15228-4230 .. . . . . . . . . . . . . . . . . . 440228-4231 .. . . . . . . . . . . . . . . . . . 471228-6403 .. . . . . . . . . . . . . . . . . . 747228-6404 .. . . . . . . . . . . . . . . . . . 746228-6405 .. . . . . . . . . . . . 754, 757228-7597 .. . . . . . . . . . . . . . . . . . 181228-7598 .. . . . . . . . . . . . . . . . . . 181228-8376 .. . . . . . . . . . . . . . . . . . 629228-8403 .. . . . . 800, 802–803,

805–808

228-9812 .. . . . . . . . . . . . . . . . . . 166229-0998 .. . . . . . . . . . . . . . . . . . 720229-3525 .. . . . . . . . . . . . 191–192229-3526 .. . . . . . . . . . . . 191–192229-3527 .. . . . . . . . . . . . 191–192229-3528 .. . . . . . . . . . . . 191–192229-5446 .. . . . . . . . . . . . . .51, 442229-6909 .. .37, 224, 227, 434229-6910 .. .37, 224, 227, 434229-6915 .. . . . . . . .37, 225, 434229-9556 .. . . . . . . . . . . . . . . 97, 99229-9557 .. . . . . . . . . . . . . . . 97, 99229-9558 .. . . . . . . . . . . . . . . 98–99229-9559 .. . . . . . . . . . . . . . . 98–99229-9568 .. . . . . . . . . . . . . . . 98–99229-9569 .. . . . . . . . . . . . . . . 98–99230-3732 .. . . . . . . . . . . . 804, 809230-3733 .. . . . . . . . . . . . 804, 809230-3772 .. . . . . . . . . . . . . . . . . . 804230-3996 .. . . . . . . . . . . . . . . . . . 455230-4512 .67, 336, 451, 466–

467230-6167 .. . . . . . . . . . . . . . . . . . 467230-6173 .. . . . . . . . . . . . . . . . . . 467230-7154 .. . . . . . . . . . . . . . . . . . 629230-7156 .. . . . . . . . . . . . . . . . . . 629230-7159 .. . . . . . . . . . . . . . . . . . 629230-7162 .. . . . . . . . . . . . . . . . . . 629230-7177 .. . . . . . . . . . . . . . . . . . 438230-7269 .. . . . . . . . . . . . . . . . . . 438230-7272 .. . . . . . . . . 37–38, 434230-7273 .. . . . . . . . . . . . . . . . . . 435231-3079 .. . . . 403, 825, 830–

831, 834–835231-3080 .. . . . . . . . . . . . . . . . . . 403231-3087 .. . . . . . . . . . . . . .89, 475231-3088 .. . . . . . . . . . . . . .89, 475231-3089 .. . . . . . . . . . . . . .89, 476231-3090 .. . . . . . . . . . . . . . . . . . 494231-3091 .. . . . . . . . . . . . . . . . . . 494231-3092 .. . . . . . . . . . . . . . . . . . 494231-3093 .. . . . . . . . . . . . 212–213231-3712 .. . . . . . . . . . . . . . . . . . 469231-3713 .. . . . . . . . . . . . . . . . . . 469231-3714 .. . . . . . . . . . . . 465–466231-4010 .. . . . . . . . . . . . . . . . . . 481231-4011 .. . . . . . . . . . . . . . . . . . 479231-4605 .. . . . . . . . . . . . . . . . . . 194231-4606 .. . . . . . . . . . . . . . . . . . 194231-4607 .. . . . . . . . . . . . . . . . . . 194231-4608 .. . . . . . . . . . . . . . . . . . 194231-9484 .. . . . . . . . . . . . . . . . . . 195231-9486 .. . . . . . . . . . . . . . . . . . 195232-3326 .. . . . . . . . . . . . . . . . . . 166232-4466 .. . . . . . . . . . . . . . . . . . 762233-0368 .. . . . . . . . . . . . . . . 46–48

892

Part Number Index


233-0372 .. . . . . . . . . . . . . . . 46–48233-0375 .. . . . . . . . . . . . . . . . . . . .49233-0385 .. . . . . 357–358, 485,

502, 688233-0386 .. . . . . 357–358, 485,

502, 688233-2048 .. . . . . . . . . . . . . . . . . . 765233-4846 .. . . . . . . . . . . . . . . 75–76233-4848 .. . . . . . . . . . . . . . . . . . . .76233-4851 .. . . . . . . . . . . . . . . . . . . .77233-5001 .. . . . . . . . . . . . . . . 22–23233-7230 .. . . . . . . . . . . . . . . . . . 438234-0742 .. . . . . . . . . . . . . . . . . . 792234-0743 .. . . . . . . . . . . . . . . . . . 809234-4319 .. . . . . . . . . . 48, 75–77234-4320 .. . . . . . . . . . . . . . . . . . . .76234-5973 .. . . . . . . . . . . . . . . . . . 166234-5974 .. . . . . . . . . . . . . . . . . . 166234-5975 .. . . . . . . . . . . . . . . . . . 166234-6029 .. . . . . . . . . . . . . . . . . . 181234-6030 .. . . . . . . . . . . . . . . . . . 181234-6031 .. . . . . . . . . . . . . . . . . . 181234-6033 .. . . . . . . . . . . . . . . . . . 181234-6084 .. . . . . . . . . . . . . . . . . . 166234-7703 .. . . . . . . . . . . . . . . . . . 174234-8877 .. . . . . . . . . . . . . . . . . . 184234-8881 .. . . . . . . . . . . . . . . . . . 184234-8958 .. . . . . . . . . . . . . . . . . . 770234-8959 .. . . . . . . . . . . . . . . . . . 770234-8962 .. . . . . . . . . . . . 770, 778234-8967 .. . . . . . . . . . . . . . . . . . 768234-8968 .. . . . . . . . . . . . . . . . . . 768234-8984 .. . . . . . 768, 774–775234-9368 .. . . . . . . . . . . . . . . . . . 761234-9369 .. . . . . . . . . . . . . . . . . . 761234-9672 .. . . . . . . . . . . . . . . 62–63234-9699 .. . . . . . . 62, 465–466234-9700 .. . . . . . . . . . . . . . . . . . . .70234-9704 .. . . . . . . . . . . . . . . . . . . .69234-9705 .. . . . . . . . . . . . . . . . . . . .70235-1088 .. . . . . . 797, 800–801235-1397 .. . . . . . . . . . . . . . . . . . . .70235-2501 .. . . . . . . . . 31–32, 434235-2503 .. . . . . . . . . . . . . . . . . . . .41235-2504 .. . . . . . . . . . . . . . . . . . . .41235-2511 .. . . . . . . . . . . . . . . . . . . .31235-2514 .. . . . . . . . . . . . . . . 6, 275235-2529 .. . . . . . 273, 295, 299235-2533 .. . . . . . . . . . . . 295, 299235-2534 .. . . . . . 277, 295, 299235-2535 .. . . . . . . . . . . . 273–274235-2554 .. . . . . . 277, 295, 299235-2555 .. . . . . . . . . . . . . . . . . . 277235-2558 .. . . . . . . . . . . . . . . . . . 245235-2559 .. . . . . . . . . . . . . . . . . . 245235-2620 .. . . . . . . . . . . . . . . . . . . . . 6

235-4157 .. . . . . . . . . . . . . .88, 475235-5260 .. . . . . . . . . . . . . . . . . . 562235-5974 .. . . . . . . .87, 473, 492235-7774 .. . . . . . . . . . . . 593–594235-7775 .. . . . . . . . . . . . 593–594235-8531 .. . . . . . . . . . . . . . . . . . 591235-8536 .. . . . . . . . . . . . . . . . . . 602236-1870 .. . . . . . . . . . . . . . . . . . . .13236-8178 .. . . . . . . . . . . . . . . . . . 484236-8179 .. . . . . . . . . . . . . . . . . . 485236-8281 .. . . . . . . . . . . . . . . . . . 818236-8282 .. . . . . . . . . . . . . . . . . . 820236-8893 .. . . . . . . . . . . . . . . . . . 584236-9861 .. . . . . . 336, 451, 532236-9864 .. . . . . . . .67, 336, 532236-9865 .. . . . . . . . . . . . . . . . . . . .67236-9866 .. . . . . . . .67, 336, 532236-9874 .. . . . . . . . . . . . . . . . . . . .67237-3790 .. . . . . 113–114, 357,

484, 486, 502237-7305 .. . . . 338–339, 452–

453, 677237-7306 .. . . . . . 339, 453, 677237-7531 .. . . . . . . . . . . . . . . . . . . .70237-8201 .. . . . . . . . . . . . . . . . . . 283238-0450 .. . . . . . . . . . . . . . . . . . . .76238-0452 .. . . . . . . . . . 48, 75–77238-0453 .. . . . . . . . . . 48, 75–77238-0472 .. . . . . . 274, 295, 299238-0473 .. . . . . . 274, 295, 299238-3231 .. . . . . . . . . . . . . . . . . . 772238-6928 .. . . . . . . . . . . . . . . 37–38238-6929 .. . . . . . 224–225, 227238-6930 .. . . . . . . . . . . . . . . 37–38238-6931 .. . . . . . . . . . . . . . . 37–38238-7664 .. . . . . . . . . . . . . . . . . . 802238-7709 .. . . . . . . . . . . . . . . . . . 809238-7728 . 802, 805, 807–808238-7729 . 802, 805, 807–808238-7860 .. . . . . . . . . . . . . . . . . . 493238-7861 .. . . . . . . . . . . . . . . . . . 493238-8371 .. . . . . . . . . . . . . . . . . . 245238-8591 .. . . . . . . . . . . . . . . . . . 600238-8592 .. . . . . . . . . . . . . . . . . . 600238-9950 .. . . . . . . . . . . . 339, 453238-9951 .. . . . . . 337–338, 452238-9954 .. . . . . . . . . . . . 337–338238-9956 .. . . . . . . . . . . . 677–678239-0673 .. . . . . . . . . . . . . . . . . . 188239-0675 .. . . . . . . . . . . . . . . . . . 188239-0676 .. . . . . . . . . . . . . . . . . . 188239-0677 .. . . . . . . . . . . . . . . . . . 188239-0678 .. . . . . . . . . . . . . . . . . . 188239-2230 .. . . . . . . . . . . . . . . . . . 357239-2309 .. . . . . . . . . . . . . . . . . . 181239-2310 .. . . . . . . . . . . . . . . . . . 181

239-3690 .. . . . . . . . . . . . . . . . . . 591239-3691 .. . . . . . . . . . . . . . . . . . 601239-4362 . 548, 552, 557, 563239-5272 . 178–179, 181, 188239-5509 .. . . . . . 178–179, 188239-6881 .. . . . . . . . . . . . . . . . . . 502239-6882 .. . . . . . . . . . . . . . . . . . 357239-7943 .. . . . 110, 112, 138–

139, 141, 158–159,305–306

239-8090 .. . . . . . . . . . . . . . . . . . . .46239-8091 .. . . . . . . . . . . . . . . . . . . .46240-2503 .. . . . . . 339, 453, 677240-2504 .. . . . . . 339, 453, 677240-2988 . 549, 558, 565, 581240-3056 .. . . . . . . . . . . . . . . . . . 727240-6304 .. . . . . . . . . . . . . . . . . . 776240-6673 .. . . . . . . . . . . . . . . . . . 143240-6674 .. . . . . . . . . . . . . . . . . . 143240-9557 .. . . . . . . . . 51–52, 444241-1855 .. . . . . 153, 155, 161,

169, 185, 803241-5972 .. . . . . . . . . . . . . . . . . . 776241-5976 .. . . . . . . . . . . . . . . . . . 776242-1931 .. . . . . . . . . . . . . . . . . . 143242-4067 .. . . . . . . . . . . . . . . . . . 624242-4070 .. . . . . . . . . . . . . . . . . . 625242-8904 .. . . . . . . . . . . . . . . . . . . .71243-0499 .. . . . . . . . . . . . . . . . . . 434243-0501 .. . . . . . . . . . . . . . . . . . 437243-2693 .. . . . . . . . . . . . . . . . . . 245243-3277 .. . . . . . . . . . . . . . . . . . 252243-4365 .. . . . . . . . . . . . . . . . . . 166243-4368 .. . . . . . . . . . . . . . . . . . 166243-4370 .. . . . . . . . . . . . . . . . . . 166243-4372 .. . . . . . . . . . . . . . . . . . 181243-4373 .. . . . . . . . . . . . . . . . . . 181243-5319 .. . . . . . . . . . . . . . . . . . 281243-5321 . 279, 296, 300, 303243-5325 .. . . . . . . . . . . . 212–213244-0878 .. . . . . . . . . . . . . . . . . . 145244-0879 .. . . . . . 145, 151, 161244-1323 .. . . . . . . . . . . . 146–147244-1324 .. . . . . . . . . . . . 146–147244-3099 .. . . . . . . . . . . . . . . . . . 819244-4534 .. . . . . . . . . . . . . . . . . . 437244-6571 .. . . . . . . .37, 224, 434244-6572 .. . . . . . . .37, 224, 434244-6573 .. . . . . . . .37, 224, 434244-6574 .. . . . . . . .37, 224, 434244-7568 .. . . . . . . . . . . . . . . . . . 166244-8697 .. . . . . . . . . . . . 616, 622245-3805 .. . . . . . . . . . . . 616, 622245-3806 .. . . . . . . . . . . . 616, 622245-3808 .616–617, 622–623245-9942 .. . . . . . . . . . . . . . . . . . 167

245-9943 ... . . . . . . . . . . . . . . . . 169245-9944 ... . . . . . . . . . . . . . . . . 169245-9945 ... . . . . . . . . . . . . . . . . 169245-9946 ... . . . . . . . . . . . . . . . . 169245-9947 ... . . . . . . . . . . . . . . . . 183245-9950 ... . . . . . . . . . . . . . . . . 197245-9951 ... . . . . . . . . . . . . . . . . 199245-9952 ... . . . . . . . . . . . . . . . . 199246-0504 ... . . . . . . . . . . . . . . . . 616246-0505 ... . . . . . . . . . . 622–623246-0506 ... . . . . . . . . . . 622–623246-0775 ... . . . . 151–152, 161246-0779 ... . . . . 152–153, 161246-0780 ... . . . . . . . . . . 152, 161246-1906 ... . . 546–547, 550–

551, 554–555, 559–560, 572–574

246-1907 .567–568, 584–588246-1908 ... . . . . . . . . . . 596–599246-4341 ... . . . . . . . . . . . . . . . . . .48246-5140 ... . . . . . . . . . . . . . . . . . .70246-5203 ... . . . . . . . . . . . . . . . . . .70246-5205 ... . . . . . . . . . . . . . . . . . .70246-5207 ... . . . . . . . . . . . . . . . . . .69246-5211 ... . . . . . . . . . . . . . . . . . .71246-5213 ... . . . . . . . . . . . . . . . . . .70246-5228 ... . . . . . . . . . . 680, 691246-5425 . 548, 551, 557, 563246-5474 ... . . . . . . . . . . . . . . . . 245246-5475 ... . . . . . . . . . . . . . . . . 245246-5714 ... . . . . . . . . . . . . . . . . . .48246-5726 ... . . . . . . . . . . 295, 299246-5727 ... . . . . . . . . . . 295, 299246-5747 ... . . . . . . . . . . . . . . . . . .41246-5748 ... . . . . . . . . . . . . . . . . . .41246-5749 ... . . . . . . . . . . . . . . . . . .41246-5750 ... . . . . . . . . . . . . . . . . . .41246-5751 ... . . . . . . . . . . . . . . . . . .41246-5753 ... . . . . . . . . . . . . . . . . . .32246-5808 ... . . . . . . . . . . . . . . . . 358246-5810 ... . . . . . . . . . . . . . . . . 688246-7483 ... . . . . . . . . . . . . . . . . 143246-7486 ... . . . . . . . . . . . . . . . . 143246-7493 ... . . . . . . . . . . . . . . . . 143247-1475 ... . . . . 358, 488, 688247-1476 ... . . . . . . . . . . 488, 688247-7647 ... . . . . . . . . . . . . . . . . 819248-1537 ... . . . . 386, 616, 622248-1539 ... . . . . . . . . . . 373, 518248-1967 ... . . . . . . . . . . . . . . . . 613248-2041 ... . . . . . . . . . . . . . . . . 691248-2353 ... . . . . . . . . . . . . . . . . 220248-2987 ... . . . . . . . . . . 156, 162248-3955 ... . . . . . . . . . . . . . 24–25248-3957 ... . . . . . . . . . . . . . 24–25248-3971 ... . . . . . . . . . . . . . . . . . .47

Part Number Index


893

248-3972 ... . . . . . . . . . . . . . . . . . .47248-5304 ... . . . . . . . . . . . . . . . . . .16248-5323 ...20, 282, 411, 425248-5325 ... . . . . . . . . . . . . . . . . . .16248-5326 ... . . . . . . . . . . . . . . . . . .16248-5327 ... . . . . . . . . . . 300, 303248-5531 ... . . . . 191, 193–194248-7143 ... . . . 537, 548, 551,

557, 563248-7151 ... . . . . . . . . . . 601, 610248-7255 ... . . . . . . . . . . . . . . . . 611248-7259 ... . . . . . . . . . . . . . . . . 544248-7260 ... . . . . . . . . . . . . . . . . 545248-7261 ... . . . . . . . . . . . . . . . . 545248-7262 ... . . . . . . . . . . . . . . . . 545248-8807 ... . . . . . . . . . . . . . . . . 823249-2939 ... . . . . . . . . . . 124–125249-2940 ... . . . . . . . . . . . . . . . . 124249-5500 ... . . . . . . . . . . . . . . . . 497249-5501 ... . . . . . . . . . . . . . . . . 497249-5507 ... . . . . . . . . . . . . . . . . 498249-5509 ... . . . . . . . . . . . . . . . . 498249-7174 .164–165, 172–173249-7627 ... . . . . . . . . . . . . . . . . 249250-0367 ... . . . . . . . . . . . . . . . . 281250-0368 ... . . . . . . . . . . . . . . . . 281250-2336 ... . . . . . . . . . . 374, 518250-2337 ... . . . . . . . . . . . . . . . . 386250-3988 ... . . . 33, 35–37, 39,

204, 224–225, 302,434–436, 561, 744

250-3990 ... . . 323, 325, 342–343, 428–429, 437,

455, 505, 529250-3992 .7–8, 216, 276, 408250-3996 ... . . . 337, 341, 452,

468–469, 532250-3998 ... . . 358, 360, 485–

486, 503–504, 535,599, 608–609, 756

250-4000 ... . .9–10, 273–274,407–408

250-4002 ... . . . 238, 240, 242,396–398, 526, 828,

832, 836250-4004 ... . . . 276, 310, 415,

422–423250-4215 ... . . . . . . . . . . . . . . . . 172250-4216 ... . . . . . . . . . . . . . . . . 172250-4217 ... . . . . . . . . . . . . . . . . 172250-4218 ... . . . . . . . . . . . . . . . . 172250-4219 ... . . . . . . . . . . . . . . . . 172250-4220 ... . . . . . . . . . . . . . . . . 172250-4243 ... . . . . . . . . . . . . . . . . 165250-4244 ... . . . . . . . . . . . . . . . . 165250-4245 ... . . . . . . . . . . . . . . . . 164

250-4246 .. . . . . . . . . . . . . . . . . . 164250-4247 .. . . . . . . . . . . . 164–165250-4248 .. . . . . . . . . . . . 164–165250-9471 .. . . . . . . . . . . . . . . . . . 266250-9472 .. . . . . . . . . . . . . . . . . . 266250-9505 .. . . . . . . . . . . . . . . . . . 288250-9513 .. . . . . . . . . . . . . . . . . . 249250-9514 .. . . . . . . . . . . . . . . . . . 249250-9515 .. . . . . . . . . . . . . . . . . . 281250-9516 .. . . . . . . . . . . . . . . . . . 281251-1659 .. . . . . 113–114, 357,

484, 486, 502251-1660 .. . . . . 113–114, 357,

484, 486, 502251-2473 .. . . . . . . . . . . . . . . . . . 613251-2474 .. . . . . . . . . . . . . . . . . . 613251-3273 .. . . . . . . . . . . . 177, 187251-3280 .. . . . . . . . . . . . 190, 200251-7757 . 599, 608–609, 756251-8364 . 599, 608–609, 756251-8368 . 599, 608–609, 756251-8512 .. . . . . . . . . . . . 300, 303251-8531 .. . . . . . . . . . . . . . . . . . 297251-8532 .. . . . . . . . . . . . . . . . . . 297251-8570 .. . . . . . . . . . . . . . . 58–59251-8578 .. . . . . . . . . . . . . . . 28–29251-8580 .. . .28–29, 297–298251-8595 .. . . . . . . . . . . . . . . . . . . .16251-8596 .. . . . . . . . . . . . . . . . . . . .16251-8597 .. . . . . . . . . . . . . . . . . . . .16252-0546 .. . . . . . . . . . . . . . . . . . . .43252-1578 .. . . . . . . . . . . . . . . . . . 294252-4429 .. . . . . . . . . . . . . . . . . . 608252-5169 .. . . . . . . . . . . . . . . . . . 294252-5170 .. . . . . . . . . . . . . . . . . . 294252-5387 .. . . . . . . . . . . . . . . . . . 266252-5388 .. . . . . . . . . . . . . . . . . . 266252-6327 .. . . . . . 178–180, 188252-6329 . 178–179, 181, 188252-7855 .. . . . . 33, 35, 38–39,

204, 224–226, 435252-7856 .. . . . . . . . . . . . . . . 7, 216252-7857 .. . . . . 337, 341, 452,

455, 468–469252-7858 .. . . . . 358, 360, 485,

487, 503–504252-7859 .. . . . 323, 326, 343–

344, 428–429, 437,456, 505

252-7860 .. . . .9–10, 217, 273,275, 407–408

252-7861 .. . . . 238, 240, 396–397, 399

252-7862 .. . . . . 277, 310, 415,422–423

252-9705 .. . . . . . . . . . . . . . . . . . . .71

252-9706 .. . . . . . . . . . . . . . . . . . . .71252-9707 .. . . . . . . . . . . . . . . . . . . .71252-9708 .. . . . . . . . . . . . . . . . . . . .71253-0543 .. . . . . . . . . . . . . . . . . . 480253-0544 .. . . . . . . . . . . . . . . . . . 480253-0547 .. . . . . . . . . . . . . . . . . . 479253-0548 .. . . . . . . . . . . . . . . . . . 479253-2740 .. . . . . . 599, 608, 756253-2741 .. . . . . . . . . . . . . . . . . . 616253-2742 .. . . . . . . . . . . . . . . . . . 622253-3667 .. . . . . . . . . . . . . . . . . . 481253-3668 .. . . . . . . . . . . . . . . . . . 481254-0224 .. . . . . . . 63, 465–466254-0225 .. . . . . . . . . . . . . . . 31–32254-0227 .. . . . . . . . . 6, 295, 299254-0228 .. . . . . . . . . . . . . . . . . . 239254-0230 .. . . . . . . . . . . . . . . . . . . .70254-0233 .. . . . . . . . . . . . . . . . . . . .71254-0234 .. . . . . . . . . . . . . . . . . . . .71254-0614 .. . . . . . . . . . . . . . . . . . 247254-0615 .. . . . . . . . . . . . . . . . . . 279254-0634 .. . . . . . . . . . . . . . . . . . 247254-0635 .. . . . . . . . . . . . . . . . . . 279254-0644 .. . . . . . . . . . . . . . . . . . 247254-0645 .. . . . . . . . . . . . . . . . . . 279254-0669 .. . . . . . . . . . . . . . . . . . 284254-0681 .. . . . . . . . . . . . . . . . . . 284254-0684 .. . . . . . . . . . . . . . . . . . 247254-3801 .. . . . . . . . . . . . . . . . . . . .16254-3802 .. . . . . . . . . . . . . . . . . . . .16254-3927 .. . . . . . . . . . . . . . . 46–48254-3928 .. . . . . . . . . . . . . . . 46–48254-3929 .. . . . . . . . . . . . . . . 46–48254-4095 .. . . . . . . . . . . . . . . . . . 751254-4432 .. . . . . . . . . . . . . . . . . . . .16254-4433 .. . . . . . . . . . . . . . . 16, 49254-4467 .. . . . . . . . . . . . . . . . . . . .70254-4468 .. . . . . . . . . . . . . . . . . . . .70254-4469 .. . . . . . . . . . . . . . . . . . . .70254-4470 .. . . . . . . . . . . . . . . . . . . .70254-4471 .. . . . . . . . . . . . . . . . . . . .70254-4472 .. . . . . . . . . . . . . . . . . . . .69254-4473 .. . . . . . . . . . . . . . . . . . . .70254-4474 .. . . . . . . . . . . . . . . . . . . .69254-4475 .. . . . . . . . . . . . . . . . . . . .70254-5240 .. . . . . . . . . . . . . . . . . . 480254-5241 .. . . . . . . . . . . . . . . . . . 480254-5242 .. . . . . . . . . . . . . . . . . . 480254-5243 .. . . . . . . . . . . . . . . . . . 480254-5288 .. . . . . . . . . . . . . . . . . . 447254-5289 .. . . . . . . . . . . . . . . . . . 447254-5290 .. . . . . . . . . . . . . . . . . . 448254-5291 .. . . . . . . . . . . . . . . . . . 448254-7199 .. . . . . . . . . . . . . . . . . . . .34254-9047 .. . . . . . . . . . . . . . . . . . . .41254-9048 .. . . . . . . . . . . . . . . . . . . .41

254-9049 .. . . . . . . . . . . . . . . . . . . .41254-9050 .. . . . . . . . . . . . . . . . . . . .41254-9051 .. . . . . . . . . . . . . . . . . . . .41254-9052 .. . . . . . . . . . . . . . . . . . . .41254-9053 .. . . . . . . . . . . . . . . . . . . .41255-1075 .. . . . . . . . . . . . . . . . . . 446255-1076 .. . . . . . . . . . . . . . . . . . 446255-1530 .. . . . . . . . . . . . . . . . . . . .12255-1532 .. . . . . . . . . . . . . . . . . . . .12255-1533 .. . . . . . . . . . . . . . . . . . . .12255-1534 .. . . . . . . . . . . . . . . . . . . .12255-1536 .. . . . . . . . . . . . . .12, 278255-1537 .. . . . . . . . . . . . . .12, 278255-4182 .. . . . . . 277, 295, 299255-4184 .. . . . . . . . . . . . 295, 299255-4791 .. . . . . 113, 357–358,

484–485, 502255-4792 .. . . . . 113, 357–358,

484–485, 502255-4793 .. . . . . 113, 357–358,

484–485, 502255-4794 .. . . . . 113, 357–358,

484–485, 502255-5983 .. . . . . . . . . . . . . . . . . . 472255-7174 .. . . . . .91–92, 94–95255-8060 .. . . . . . . . . . . . . . . . . . 471255-8095 .. . . . . . . . . . . . . . . . . . 295255-8882 .. . . . . 129, 365, 493,

511, 694255-9219 .. . . . . . . . . . . . 363, 507256-4942 .. . . . . . . . . . . . . . . . . . 278256-4944 .. . . . . . . . . . . . . .12, 278256-4970 .. . . . . . . . . . . . . . . . . . 469256-4971 .. . . . . . . . . . . . . . . . . . 469256-4973 .. . . . . . . . . . . . . . . . . . 437256-4974 .. . . . . . . . . . . . . . . . . . 437256-6081 .. . . . . . . . . . . . . . . . . . 756256-6084 .. . . . . . . . . . . . . . . . . . 631256-9360 .. . .64, 67, 69, 209–

210, 336, 342, 451,467

256-9607 .. . . . . . . . . . . . . . . . . . . .42256-9608 .. . . . . . . . . . . . . . . . . . . .42256-9612 .. . . . . . . . . . . . . . . . . . 465257-1990 .. . . . . . . . . . . . . . . . . . 526257-1991 .. . . . . . . . . . . . . . . . . . 526257-1992 .. . . . . . . . . . . . . . . . . . 526257-1993 .. . . . . . . . . . . . . . . . . . 526257-1994 .. . . . . . . . . . . . . . . . . . 526257-2336 .. . . . . . . . . . . . . .12, 278257-3604 .. . . . . . . . . . . . . . . . . . 609257-6926 .. . . . . . . . . . . . . . . . . . 143257-6929 .. . . . . . . . . . . . . . . . . . 143257-7765 .. . . . . . . . . . . . . . . . . . 526257-7766 .. . . . . . . . . . . . . . . . . . 526257-7767 .. . . . . . . . . . . . . . . . . . 526

894

Part Number Index


257-7768 .. . . . . . . . . . . . . . . . . . 526257-7769 .. . . . . . . . . . . . . . . . . . 526257-7770 .. . . . . . . . . . . . . . . . . . 526257-7771 .. . . . . . . . . . . . . . . . . . 526257-7772 .. . . . . . . . . . . . . . . . . . 526257-7773 .. . . . . . . . . . . . 526–527257-7775 .. . . . . . . . . . . . . . . . . . 526257-7776 .. . . . . . . . . . . . . . . . . . 526257-7777 .. . . . . . . . . . . . . . . . . . 526257-8012 .. . . . . . . . . . . . . . . . . . 529257-8013 .. . . . . . . . . . . . 529–530257-8016 .. . . . . . . . . . . . . . . . . . 529257-8017 .. . . . . . . . . . . . . . . . . . 529257-8020 .. . . . . . . . . . . . . . . . . . 529257-8021 .. . . . . . . . . . . . . . . . . . 529257-8022 .. . . . . . . . . . . . . . . . . . 529257-9827 .. . . . . . . . . . . . . . . . . . 184257-9829 .. . . . . . . . . . . . . . . . . . 184258-3016 .. . . . . . . . . . . . 797, 801258-3017 .. . . . . . . . . . . . 797, 801258-3020 .. . . . . . . . . . . . 799–800258-3021 .. . . . . . . . . . . . . . . . . . 799258-3025 .. . . . . . . . . . . . 798–799258-3026 .. . . . . . . . . . . . 798–800258-3028 .. . . . . . . . . . . . . . . . . . 800258-3035 .. . . . . . . . . . . . 799–800258-3047 .. . . . . . . . . . . . 797, 801258-3052 .. . . . . . . . . . . . . . . . . . 798258-3053 .. . . . . . . . . . . . . . . . . . 798258-3064 .. . . . . . . . . . . . 798–799258-3065 .. . . . . . . . . . . . . . . . . . 800258-3074 .. . . . . . . . . . . . . . . . . . 800258-3075 .. . . . . . . . . . . . 798–800258-3084 .. . . . . . . . . . . . . . . . . . 797258-3085 .. . . . . . . . . . . . . . . . . . 797258-3086 .. . . . . . . . . . . . . . . . . . 797258-3087 .. . . . . . . . . . . . 792, 797258-3088 .. . . . . . . . . . . . . . . . . . 797258-3089 .. . . . . . . . . . . . . . . . . . 797258-3092 .. . . . . . . . . . . . 798–800258-3103 .. . . . . . . . . . . . . . . . . . 800258-3112 .. . . . . . . . . . . . 798–799258-3116 .. . . . . . 797, 800–801258-3117 .. . . . . . . . . . . . . . . . . . 800258-3118 .. . . . . . . . . . . . . . . . . . 800258-3122 .. . . . . . . . . . . . . . . . . . 797258-4614 .. . . . . . . . . . . . 196–197258-4806 .. . . . . . . . . . . . . . . . . . 184258-6544 .. . . . . . . . . . . . . . . . . . 472258-9787 .. . . . . . . . . . . . . . . . . . 245258-9788 .. . . . . . . . . . . . . . . . . . 278258-9792 .. . . . . . . . . . . . . . . . . . 246258-9793 .. . . . . . . . . . . . . . . . . . 246258-9797 .. . . . . . 346, 458, 470258-9802 .. . . . . . . . . . . . . . . . . . 439259-1072 .. . . . . . . . . . . . . . . . . . 472

259-6864 .. . . . . . . . . . . . . . . . . . 448259-7062 .. . . . . . . . . . . . . . . . . . 529259-7063 .. . . . . . . . . . . . . . . . . . 532259-7064 .. . . . . . . . . . . . . . . . . . 535259-7065 .. . . . . . . . . . . . . . . . . . 372259-8137 .. . . . . . . . . . . . 307–308260-1507 .. . . . . . . . . . . . . . . . . . 529260-1508 .. . . . . . . . . . . . . . . . . . 529260-1509 .. . . . . . . . . . . . . . . . . . 529260-1511 .. . . . . . . . . . . . . . . . . . 531260-1512 .. . . . . . . . . . . . . . . . . . 530260-2276 .. . . . . . . . . . . . . . . . . . 581260-2277 .. . . . . . . . . . . . . . . . . . 582260-2278 .. . . . . . . . . . . . . . . . . . 582260-2441 .. . . . . . . . . . . . . . . . . . 595260-2442 .. . . . . . . . . . . . . . . . . . 595260-2665 .. . . . . . . . . . . . . . . . . . 771260-2666 .. . . . . . . . . . . . . . . . . . 771260-5851 .. . . . . . . . . . . . . . . . . . 534260-6341 .. . . . . . . . . . . . . . . . . . 775260-6400 .. . . . . . . . . . . . 766–767260-6740 .. . . . . . . . . . . . 239–240260-6762 .. . . . . . . . . . . . . . . . . . 277260-6765 .. . . . . . . . . . . . . . . . . . . .12260-6766 .. . . . . . . . . . . . . . . . . . . .12260-6767 .. . . . . . . . . . . . . . . . . . . .12260-6768 .. . . . . . . . . . . . . .12, 278260-6769 .. . . . . . . . . . . . . .12, 278260-6770 .. . . . . . . . . . . . . . . . . . 278260-6771 .. . . . . . . . . . . . . . . . . . . .12260-6772 .. . . . . . . . . . . . . .12, 278260-6773 .. . . . . . . . . . . . . .12, 278260-8739 .. . . . . . . . . . . . . . . . . . 217261-1011 .. . . . . . . . . . . . 574, 744261-1012 .. . . . . . . . . . . . 574, 744261-1013 .. . . . . . . . . . . . 574, 744261-1014 .. . . . . . . . . . . . 574, 744261-1015 .. . . . . . . . . . . . 574, 744261-1016 .. . . . . . . . . . . . 575, 744261-1017 .. . . . . . . . . . . . 575, 744261-1018 .. . . . . . . . . . . . 575, 744261-1021 .. . . . . . . . . . . . 575, 744261-1022 .. . . . . . . . . . . . 575, 744261-1024 .. . . . . . . . . . . . . . . . . . 744261-2040 .. . . . . . . . . . . . . . . . . . . .24261-2041 .. . . . . . . . . . . . . . . . . . . .24261-2042 .. . . . . . . . . . . . . . . . . . . .25261-2043 .. . . . . . . . . . . . . . . . . . . .25261-2044 .. . . . . . . . . . . . . . . 55–56261-2046 .. . . . . . . . . . . . . . . 55–56261-2047 .. . . . . . . . . . . . . . . 55–56261-2070 .. . . . . . . . . . . . . . . . . . 298261-2082 .. . . . . . . . . . . . . . . . . . 297261-2083 .. . . . . . . . . . . . . . . . . . 297261-2353 .. . . . . 113–114, 357,

484, 486, 502

261-4338 .. . . . . . 191–192, 194261-4408 .. . . . . . 191, 193–194261-4472 .. . . . . . . . . . . . . . . . . . 279261-4473 .. . . . . . . . . . . . . . . . . . 247261-6104 .. . . . . . . . . . . . 803–806261-6105 .. . . . . . . . . . . . 803, 805261-6107 .. . . . . . . . . . . . . . . . . . 809261-6111 .. . . . . . . . . . . . . . . . . . 808261-6112 . 802, 805, 807–808261-6150 .. . . . . . . . . . . . . . . . . . 807261-6151 .. . . . . . . . . . . . . . . . . . 802261-6296 .. . . . . 802–803, 805,

807–808261-6297 . 802, 805, 807–808261-6300 .. . . . . . . . . . . . 804–805261-6301 .. . . . . . . . . . . . . . . . . . 804261-6302 .. . . . . . . . . . . . 808–809261-6303 .. . . . . . . . . . . . . . . . . . 808261-7105 .. . . . . . . . . . . . . . . . . . 449261-8008 .. . . . . . . . . . . . . . . . . . 526261-9436 .. . . . . . . . . . . . . . . . . . . .45261-9672 .. . . . . . 146–147, 168261-9673 . 146–147, 168, 491261-9674 .. . . . . . . . . . . . . . . . . . 183261-9675 .. . . . . . . . . . . . . . . . . . 183262-2093 .. . . . . . . . . . . . . . . . . . 279262-4781 .. . . . . . . . . . . . 548, 563262-5877 .. . . . . . . . . . . . . . . . . . 284262-5878 .. . . . . . . . . . . . . . . . . . 284262-7248 .. . . . . . . . . . . . . . . . . . . .52262-7249 .. . . . . . . . . . . . . . . . . . . .52263-2009 .. . . . . . . . . . . . . . . . . . 289263-2010 .. . . . . . . . . . . . . . . . . . 289263-2011 .. . . . . . . . . . . . . . . . . . 256263-3227 .. . . . . . . . . . . . . . . . . . 260263-3230 .. . . . . . . . . . . . . . . . . . 260263-3232 .. . . . . . . . . . . . . . . . . . 260263-3234 .. . . . . . . . . . . . . . . . . . 260263-8325 .. . . . . . . . . . . . 256–257263-8332 .. . . . . . . . . . . . . . . . . . 256263-8337 .. . . . . . . . . . . . 256–257263-8342 .. . . . . . . . . . . . . . . . . . 262263-8343 .. . . . . . . . . . . . . . . . . . 262263-8355 .. . . . . . . . . . . . . . . . . . 256263-8356 .. . . . . . . . . . . . . . . . . . 256263-8363 .. . . . . . . . . . . . 256–257263-8364 .. . . . . . . . . . . . 256–258263-8365 .. . . . . . . . . . . . 284–285263-8366 .. . . . . . . . . . . . 284–285263-9240 .. . . . . . . . . . . . . . . . . . 772263-9250 .. . . . . . . . . . . . . . . . . . 765263-9252 .. . . . . . . . . . . . 765–766263-9253 .. . . . . . . . . . . . . . . . . . 766263-9262 .. . . . . . . . . . . . . . . . . . 765263-9264 .. . . . . . . . . . . . . . . . . . 778263-9265 .. . . . . . . . . . . . . . . . . . 778

263-9267 ... . . . . . . . . . . . . . . . . 770263-9268 ... . . . . . . . . . . . . . . . . 770263-9759 ... . . . . . . . . . . 362, 490263-9760 ... . . . . 362, 490, 506263-9761 ... . . . . 362, 490, 506264-1108 ... . . . . . . . . . . . . . . . . 469264-1110 ... . . . . . . . . . . . . . . . . 437264-1671 ... . . . . . . . . . . . . . . . . 595264-1672 ... . . . . . . . . . . . . . . . . 595264-5371 ... . . . . 767, 774–775264-7098 ... . . . . . . . . . . . . . . . . 449264-7099 ... . . . . . . . . . . . . . . . . 449264-9821 ... . . . . . . . . . . 601, 610265-0929 ... . . . . . . . . . . . . . . . . 288265-0932 ... . . . . . . . . . . . . . . . . 288265-0934 ... . . . . . . . . . . . . . . . . 288265-0935 ... . . . . . . . . . . 255, 288265-0940 ... . . . . . . . . . . . . . . . . 294265-0945 ... . . . . . . . . . . . . . . . . 255265-0946 ... . . . . . . . . . . . . . . . . 255265-0949 ... . . . . . . . . . . . . . . . . 255265-0953 ... . . . . . . . . . . . . . . . . 255265-5109 . 575, 588–589, 749265-7674 ... . . . . . . . . . . . . . . . . 777265-7675 ... . . . . . . . . . . . . . . . . 776265-8320 ... . . . . . . . . . . . . . . . . . .70265-8321 ... . . . . . . . . . . . . . . . . . .70266-0083 ... . . . . . . . . . . . . . . . . . .69266-0084 ... . . . . . . . . . . . . . . . . . .70266-0088 ... . . . . . . . . . . . . . . . . . .70266-0089 ... . . . . . . . . . . . . . . . . . .70266-3152 ... . . . . 157, 163, 170266-7271 ... . . . . . . . . . . . . . . . . 749266-7272 ... . . . . . . . . . . . . . . . . 749266-8793 .769–770, 774–775266-8794 .768–769, 774–775267-3878 ... . . . . . . . . . . 687–688267-4813 ... . . . . . . . . . . . . . . . . 776267-4817 ... . . . . . . . . . . . . . . . . 776267-4819 ... . . . . . . . . . . . . . . . . 776267-4829 ... . . . . 768, 774–775267-4831 ... . . . . . . . . . . . . . . . . 768267-6099 ... . . . . . . . . . . . . . . . . . .41267-6131 ... . . . . . . . . . . 259–260267-6132 ... . . . . . . . . . . 259–260267-6136 ... . . . . . . . . . . 259–260267-6137 ... . . . . . . . . . . 259–260267-7504 ... . . . . . . . . . . . . . . . . 143267-8910 ... . . . . . . . . . . . . . . . . . .41268-5945 ... . . . . . . . . . . . . . . . . 108269-1133 ... . . . . . . . . . . . . . . . . . .12269-4004 ... . . . . 575, 589, 749269-4027 ... . . . . 575, 589, 749269-7103 ... . . . . 575, 589, 749269-7858 ... . . . . . . . . . . 749–750270-2672 ... . . . . . . . . . . . . . . . . . .70

Part Number Index


895

271-6033 ... . . . . . . . . . . . . . . . . 298271-6079 ... . . . .21–22, 53–54271-6080 ... . . . . . . . . . . . . . . . . 297271-6081 ... . . . . . . . . . . . . . . . . 297271-6085 ... . . . . . . . . . . . . . . . . 298271-6086 ... . . . . . . . . . . . . . . . . 298271-6093 ... . . . . . . . . . . . . . . . . . .47271-6094 ... . . . . . . . . . . . . . . . . . .48271-6095 ... . . . . . . . . . . . . . . . . . .48271-6117 ... . . . . . . . . . . . . . . . . . .16271-6118 ... . . . . . . . . . . . . . . . . . .16272-3179 ... . . . . . . . . . . . . . . . . 143272-3180 ... . . . . . . . . . . . . . . . . 143272-3181 ... . . . . . . . . . . . . . . . . 143272-3182 ... . . . . . . . . . . . . . . . . 143272-3183 ... . . . . . . . . . . . . . . . . 143272-6009 ... . . . . . . . . . . . . . . . . 138272-6010 ... . . . . . . . . . . . . . . . . 139272-6013 ... . . . 110, 138–139,

141, 158–159, 305272-7103 ... . . . . . . . . . . 110, 305273-1685 ... . . . . . . . . . . . . . . . . . .70273-1686 ... . . . . . . . . . . . . . . . . . .70273-3996 ... . . . . . . . . . . . . . . . . 130273-6910 ... . . . . . . . . . . . . . . . . 595273-8806 ... . . . . . . . . . . . . . . . . 141274-2008 ... . . . . . . . . . . . . . . . . . .70274-7839 ... . . . . . . . . . . . . . . . . . .41275-3564 ... . . . . . . . . . . . . . . . . 527275-3565 ... . . . . . . . . . . . . . . . . 527275-3566 ... . . . . . . . . . . . . . . . . 527275-3567 ... . . . . . . . . . . . . . . . . 527275-3570 ... . . . . . . . . . . . . . . . . 527275-3571 ... . . . . . . . . . . . . . . . . 527275-3576 ... . . . . . . . . . . . . . . . . 527275-3578 ... . . . . . . . . . . . . . . . . 527275-3579 ... . . . . . . . . . . 527, 663275-3580 ... . . . . . . . . . . . . . . . . 527275-3581 ... . . . . . . . . . . . . . . . . 528275-4086 ... . . . . . . . . . . . . . . . . 528276-0533 ... . . . . . . . . . . . . . . . . 143276-0541 ... . . . . . . . . . . . . . . . . 143276-0545 ... . . . . . . . . . . . . . . . . 143276-0552 ... . . . . . . . . . . . . . . . . 143276-0979 ... . . . . . . . . . . . . . . . . 789276-1680 ... . . . . . . . . . . . . . . . . 290276-1681 ... . . . . . . . . . . . . . . . . 290276-1690 ... . . . . . . . . . . 285–286276-1691 ... . . . . . . . . . . 285–286276-1695 ... . . . . . . . . . . 291–292276-1699 ... . . . . . . . . . . 285–286276-1700 ... . . . . . . . . . . 285–286276-1701 ... . . . . . . . . . . 285–286276-1702 ... . . . . . . . . . . 285–286276-1711 ... . . . . . . . . . . . . . . . . 255276-1716 ... . . . . . . . . . . . . . . . . 266

276-1717 .. . . . . . . . . . . . . . . . . . 266276-1718 .. . . . . . 266–267, 290276-1753 .. . . . . . . . . . . . . . . . . . 268276-1754 .. . . . . . . . . . . . . . . . . . 268276-1755 .. . . . . . . . . . . . . . . . . . 291276-1757 .. . . . . . . . . . . . . . . . . . 269276-1766 .. . . . . . . . . . . . . . . . . . 269276-2414 .. . . . . . . . . . . . . . . . . . 181276-2416 .. . . . . . . . . . . . . . . . . . 181276-2417 .. . . . . . . . . . . . . . . . . . 181276-2418 .. . . . . . . . . . . . . . . . . . 181277-2238 .. . . . . . 277, 295, 299277-2239 .. . . . . . . . . . . . 295, 299277-2240 .. . . . . . . . . . . . 295, 299277-4492 .. . . . . . . . . . . . 508–511277-8576 .. . . . . . . . . . . . 777, 787277-8577 .. . . . . . . . . . . . 777, 787277-8667 .. . . . . . . . . . . . 785–786277-8668 .. . . . . . . . . . . . 785–786278-1011 .. . . . . . . . . . . . . . . . . . 269278-1215 .. . . . . . . . . . . . . . . . . . 792278-1219 .. . . . . . . . . . . . . . . . . . 802278-1240 .. . . . . . . . . . . . 802, 807278-1261 .. . . . . . . . . . . . . . . . . . 795278-1264 .. . . . . . . . . . . . 802, 807278-1265 .. . . . . . . . . . . . 802, 807278-1266 .. . . . . . . . . . . . 802, 807278-1301 .. . . . . . . . . . . . . . . . . . 793278-1310 .. . . . . 802, 804–805,

807–808278-1311 .. . . . . 802, 804–805,

807–808278-1312 .. . . . . . . . . . . . 804, 809278-2352 .. . . . . . . . . . . . . . . . . . 182278-2355 .. . . . . . . . . . . . . . . . . . 245278-2356 .. . . . . . . . . . . . . . . . . . 245278-2358 .. . . . . . . . . . . . . . . . . . 278278-2359 .. . . . . . . . . . . . . . . . . . 278278-2365 .. . . . . . . . . . . . . . . . . . 196278-2366 .. . . . . . . . . . . . . . . . . . 196278-2374 .. . . . . . . . . . . . . . . . . . 182278-2375 .. . . . . . . . . . . . . . . . . . 144278-2376 .. . . . . . . . . . . . . . . . . . 166278-7282 .. . . . . . . . . . . . . . . . . . 611278-7286 .. . . . . . . . . . . . . . . . . . 624278-9538 .. . . . . . . . . . . . 153, 162278-9539 .. . . . . . . . . . . . 153, 162278-9540 .. . . . . . . . . . . . 153, 162278-9541 .. . . . . . . . . . . . 153, 162279-2570 .. . . . . . . . . . . . . . . . . . . .93279-4242 .. . . . . . . . . . . . . . . . . . . .76279-4243 .. . . . . . . . . . . . . . . . . . . .76279-9120 .. . . . . . . . . . . . . . . . . . 440279-9322 .. . . . . . . . . . . . . . . . . . 440279-9325 .. . . . . . . . . . . . . . . . . . 440280-1417 .. . . . . . . . . . . . . . . . . . 440

280-5025 .. . . . . . . . . . . . 793, 795280-5026 .. . . . . . . . . . . . 793, 795280-5038 .. . . . . . . . . . . . 793–795280-5074 .. . . . . . . . . . . . 793–795280-5075 .. . . . . . . . . . . . 793–795280-5091 .. . . . . . . . . . . . . . . . . . 792280-5112 .. . . . . . . . . . . . 793, 795280-8722 .. . . . . . . . . . . . . . . . . . 469281-6370 .. . . . . . . . . . . . . . . . . . 375281-6371 .. . . . . . . . . . . . . . . . . . 375281-6372 .. . . . . . . . . . . . . . . . . . 375281-6373 .. . . . . . . . . . . . . . . . . . 375281-6374 .. . . . . . . . . . . . . . . . . . 375281-6380 .. . . . . . . . . . . . . . . . . . 381281-6386 .. . . . . . . . . . . . . . . . . . 380281-8338 .. . . . . . 252–254, 527281-8339 . 252–254, 527, 662282-3655 .. . . . 363, 490, 507–

508, 536282-3668 .. . . . . . . . . . . . . . . . . . 268282-3669 .. . . . . . . . . . . . . . . . . . 268282-3679 .. . . . . . . . . . . . . . . . . . 291282-4017 .. . . . . . . . . . . . . . . 75–77283-2115 .. . . . . . . . . . . . 617, 619283-5249 .. . . . . . . . . . . . . . . 75, 77283-5250 .. . . . . . . . . . . . . . . 75, 77283-5251 .. . . . . . . . . . . . . . . . . . . .76283-5252 .. . . . . . . . . . . . . . . . . . . .76283-5253 .. . . . . . . . . . . . . . . 75, 77283-5254 .. . . . . . . . . . . . . . . 75, 77283-5746 .. . . . . . . . . . . . . . . 47–49283-5748 .. . . . . . . . . . . . . . . 47–49283-5750 .. . . . . . . . . . . . . . . 47–49283-5752 .. . . . . . . . . . . . . . . 47–49283-5753 .. . . . . . . . . . . . . . . 47–48283-6423 .. . . . . . . . . . . . . . . . . . 257283-6424 .. . . . . . . . . . . . . . . . . . 257283-6425 .. . . . . . . . . . . . . . . . . . 257283-6426 .. . . . . . . . . . . . . . . . . . 257283-8702 .. . . . . . . . . . . . . . . . . . . .70283-8705 .. . . . . . . . . . . . . . . . . . . .70283-8707 .. . . . . . . . . . . . . . . . . . . .70284-1651 .. . . . . . . . . . . . . . . . . . 779284-1652 .. . . . . . . . . . . . . . . . . . 779284-5456 .. . . . . . . . . . . . 152, 161284-7361 .. . . . . . . . . . . . . . . . . . 566284-7362 .. . . . . . . . . . . . . . . . . . 566284-7832 .. . . . . . . . . . . . . . . . . . 256284-7833 .. . . . . . . . . . . . . . . . . . 256285-3476 .. . . . . . . . . . . . . . . . . . 279285-4296 .. . . . . . . . . . . . . . . . . . 469285-6125 .. . . . . . . . . . . . . . . . . . 784285-7499 .. . . . . . . . . . . . . . . . . . 284285-7502 .. . . . . . . . . . . . . . . . . . 284285-7505 .. . . . . . . . . . . . . . . . . . 284285-7511 .. . . . . . . . . . . . . . . . . . 284

286-1832 .. . . . . . . . . . . . . . . . . . 263286-1833 .. . . . . . . . . . . . . . . . . . 263286-1840 .. . . . . . . . . . . . . . . . . . 263286-1845 .. . . . . . . . . . . . . . . . . . 262286-1846 .. . . . . . . . . . . . . . . . . . 262286-1850 .. . . . . . . . . . . . . . . . . . 263286-1858 .. . . . . . . . . . . . . . . . . . 289286-1859 .. . . . . . . . . . . . . . . . . . 289286-4226 .. . . . . . . . . . . . . . . . . . 471286-4227 .. . . . . . . . . . . . . . . . . . 471286-4261 .. . . . . . . . . . . . . . . . . . 256286-4262 .. . . . . . . . . . . . . . . . . . 256286-7211 .. . . . . . . . . . . . . . . . . . 284286-7212 .. . . . . . . . . . . . . . . . . . 284286-9821 .. . . . . . . . . . . . . . . . . . 537286-9823 .. . . . . . . . . . . . . . . . . . 538286-9825 .. . . . . . . . . . . . . . . . . . 537286-9826 .. . . . . . . . . . . . . . . . . . 537286-9827 .. . . . . . . . . . . . . . . . . . 537286-9828 .. . . . . . . . . . . . . . . . . . 537286-9830 .. . . . . . . . . . . . . . . . . . 537287-3118 .. . . . . . . . . . . . . . . . . . 537287-3119 .. . . . . . . . . . . . . . . . . . 537287-3231 .. . . . . . . . . . . . . . . . . . 537287-3232 .. . . . . . . . . . . . . . . . . . 537287-4021 .. . . . . . . . . . . . . . . . . . 257287-4022 .. . . . . . . . . . . . . . . . . . 257287-4023 .. . . . . . . . . . . . . . . . . . 257287-4024 .. . . . . . . . . . . . . . . . . . 257287-6104 .. . . . . . . . . . . . . . . . . . . .41287-8269 .. . . . . . . . . . . . . . . . . . 750287-8270 .. . . . . . . . . . . . . . . . . . 750288-0934 ..88, 351, 475, 682,

697288-0935 .. . . . . . . .88, 351, 475288-0936 .. . . . . . . . . . . . . .88, 475288-0945 ..88, 351, 475, 682,

697288-0946 .. . . . . . . .88, 351, 475288-0947 ..88, 351, 475, 682,

697288-0948 .. . . . . . . .88, 351, 475288-3690 .. . . . . . . . . . . . . . . . . . 682288-3691 .. . . . . . . . . . . . 681, 692288-3693 .. . . . . . . . . . . . . . . . . . 700288-3694 .. . . . . . . . . . . . . . . . . . 687288-3705 .. . . . . . . . . . . . 678, 700288-5754 .. . . . . . . . . . . . . . . . . . 687288-5755 .. . . . . . . . . . . . . . . . . . 687288-6668 .. . . . . . . . . . . . . . . . . . 690288-6669 .. . . . . . . . . . . . . . . . . . 690288-6670 .. . . . . . . . . . . . . . . . . . 690288-6671 .. . . . . . . . . . . . . . . . . . 690288-6672 .. . . . . . . . . . . . . . . . . . 690288-6673 .. . . . . . . . . . . . . . . . . . 690288-6676 .. . . . . . . . . . . . . . . . . . 690

896

Part Number Index


288-6677 .. . . . . . . . . . . . . . . . . . 690288-6678 .. . . . . . . . . . . . 679, 691288-6679 .. . . . . . . . . . . . 679, 691288-6681 .. . . . . . . . . . . . . . . . . . 690288-8173 .. . . . . . . . . . . . . . . . . . 225289-0270 .. . . . . . . . . . . . . . . . . . 273289-0631 .. . . . . . . . . . . . 678, 701289-0632 .. . . . . . . . . . . . 678, 701289-0633 .. . . . . . . . . . . . . . . . . . 687289-0634 .. . . . . . . . . . . . . . . . . . 687289-0635 .. . . . . . . . . . . . . . . . . . 687289-0636 .. . . . . . . . . . . . . . . . . . 687289-0638 .. . . . . . . . . . . . . . . . . . 687289-0639 .. . . . . . 533, 678, 701289-0640 .. . . . . . . . . . . . . . . . . . 687289-0641 .. . . . . . . . . . . . 678, 701289-0642 .. . . . . . . . . . . . . . . . . . 687289-0643 .. . . . . . . . . . . . 678, 701289-0644 .. . . . . . . . . . . . 687–688289-0645 .. . . . . . . . . . . . 678, 701289-0646 .. . . . . . 537, 665–666289-0647 .. . . . . . . . . . . . 678, 701289-0648 .. . . . . . . . . . . . 687–688289-2206 .. . . . . . . . . . . . 680, 691289-2207 .. . . . . . . . . . . . 680, 691289-2211 .. . . . . . . . . . . . . . . . . . 691289-3057 .. . . . . . . . . . . . 238–239289-3058 .. . . . . . . . . . . . . . . . . . 239289-3059 .. . . . . . . . . . . . 238–239289-3060 .. . . . . . . . . . . . . . . . . . 239289-3061 .. . . . . . . . . . . . 238–239289-3083 .. . . . . . 113, 484, 488289-3084 .. . . . . . 113, 484, 488289-3085 .. . . . . . . . . . . . 295, 299289-3578 .. . . . . . . . . . . . . . . . . . . .70289-3579 .. . . . . . . . . . . . . . . . . . . .70289-4946 .. . . . . . . . . . . . . . . . . . 666289-4948 .. . . . . . . . . . . . . . . . . . 665289-4949 .. . . . . . . . . . . . . . . . . . 666289-4950 .. . . . . . . . . . . . . . . . . . 666289-4951 .. . . . . . . . . . . . . . . . . . 665289-4952 .. . . . . . . . . . . . . . . . . . 665289-4954 .. . . . . . . . . . . . 665–666289-4955 .. . . . . . 537, 665–666289-4956 .. . . . . . 537, 665–666289-4957 .. . . . . . . . . . . . 665–666289-5117 .. . . . . . . . . . . . 679, 691289-5210 .. . . . . . . . . . . . . . . . . . . .41289-5214 .. . . . . . . . . . . . . . . . . . . .70289-9337 .. . . . . 637, 649, 655,

657, 668289-9338 .. . . . . 637, 649, 655,

657, 668289-9674 .. . . . . . . . . . . . . . . . . . 669290-0737 .. . . . . . . . . . . . . . . . . . . .44290-0738 .. . . . . . . . . . . . . . . . . . . .44

290-0749 .. . . . . . . . . . . . . . . . . . . .15290-0819 .. . . . . . . . . . . . . . . . . . 703290-0820 .. . . . . . . . . . . . 702–703290-0821 .. . . . . . . . . . . . 702–703290-0822 .. . . . . . . . . . . . . . . . . . 703290-0823 .. . . . . . . . . . . . 702–703290-0825 .. . . . . . . . . . . . 702–703290-0826 .. . . . . . . . . . . . 702–703290-0835 .. . . . . . . . . . . . . . . . . . 703290-0836 .. . . . . . . . . . . . . . . . . . 703290-0837 .. . . . . . . . . . . . . . . . . . 703290-0838 .. . . . . . . . . . . . . . . . . . 703290-0839 .. . . . . . . . . . . . . . . . . . 703290-0841 .. . . . . . . . . . . . 702–703290-0843 .. . . . . . . . . . . . 702–703290-0844 .. . . . . . . . . . . . 702–703290-0845 .. . . . . . . . . . . . 702–703290-0846 .. . . . . . . . . . . . . . . . . . 703290-0847 .. . . . . . . . . . . . . . . . . . 703290-0861 .. . . . . . . . . . . . . . . . . . 704290-2269 .. . . . . . . . . . . . . . . . . . 745290-2270 .. . . . . . . . . . . . . . . . . . 745290-2700 .. . . . . . . . . . . . . . . . . . 292290-3391 .. . . . . . . . . . . . . . . . . . 271290-3449 .. . . . . . 643, 649, 655290-3450 .. . . . . . . . . . . . 637, 667290-3451 .. . . . . . . . . . . . . . . . . . 667290-3452 .. . . . . . . . . . . . . . . . . . 657290-3453 . 637, 649, 655, 668290-3454 . 637, 649, 655, 668290-3455 .. . . . 637, 649, 656–

657, 668290-3456 . 637, 649, 655, 668290-3457 . 637, 649, 656, 668290-3458 .. . . . 637, 649, 656–

657, 668290-3459 .. . . . . . . . . . . . . . . . . . 657290-3460 .. . . . . . . . . . . . . . . . . . 657290-3461 .. . . . . . . . . . . . . . . . . . 657290-3462 .. . . . . . . . . . . . . . . . . . 657290-6589 .. . . . . . . . . . . . . . . . . . 532290-9938 .. . . . . . . . . . . . 679, 691290-9940 .. . . . . . . . . . . . 679, 691290-9941 .. . . . . . . . . . . . 679, 691290-9942 .. . . . . . . . . . . . 679, 691291-1612 .. . . . . . . . . . . . 113, 484291-1613 .. . . . . . . . . . . . . . . . . . 113291-1614 .. . . . . . . . . . . . . . . . . . 488291-1615 .. . . . . . . . . . . . . . . . . . 113291-5594 .. . . . . . . . . . . . . . . . . . . .70291-9151 .. . . . . . . . . . . . . . . . . . . .70291-9277 .. . . . . . . . . . . . . . . . . . 491291-9312 .. . . . . . . . . . . . . . . . . . 491291-9325 .. . . . . . . . . . . . . . . . . . 491291-9931 .. . . . . . . . . . . . . . . . . . 491292-5634 .. . . . . . . . . . . . 679, 691

292-5653 .. . . . . . . . . . . . . . . . . . . .70292-6379 .. . . . . . . . . . . . . . . . . . 469292-6380 .. . . . . . . . . . . . . . . . . . 469292-6381 .. . . . . . . . . . . . . . . . . . 469292-8081 .. . . . . . . . . . . . . . . . . . 197292-8084 .. . . . . . . . . . . . . . . . . . 197292-8085 .. . . . . . . . . . . . . . . . . . 197292-8086 .. . . . . . . . . . . . . . . . . . 197292-8088 .. . . . . . . . . . . . . . . . . . 197292-8090 .. . . . . . . . . . . . 197–198293-4691 .. . . . . . . . . . . . . . . . . . . .75293-4692 .. . . . . . . . . . . . . . . . . . . .76293-4693 .. . . . . . . . . . . . . . . 76–77293-8216 .. . . . . . . . . . . . . . . . . . 611293-8217 .. . . . . . . . . . . . . . . . . . 617293-8218 .. . . . . . . . . . . . . . . . . . 624293-9077 .. . . . . . . . . . . . . . . . . . . .41293-9146 .. . . . . . . .38, 225, 435293-9147 .. .67, 336, 451, 467294-0567 .. . . . . . . . . . . . . . . . . . . .70294-0569 .. . . . . . . . . . . . . . . . . . . .70294-0570 .. . . . . . . . . . . . . . . . . . . .70294-0571 .. . . . . . . . . . . . . . . . . . . .70294-0574 .. . . . . . . . . . . . . . . . . . . .70294-0575 .. . . . . . . . . . . . . . . . . . . .70294-3060 .. . . . . . . . . . . . . . . . . . 616294-3061 .. . . . . . . . . . . . . . . . . . 616294-3062 .. . . . . . . . . . . . . . . . . . 616294-3063 .. . . . . . . . . . . . . . . . . . 622294-3064 .. . . . . . . . . . . . . . . . . . 622294-4438 .. . . . . . . . . . . . . . . . . . 785294-4439 .. . . . . . . . . . . . . . . . . . 785294-4813 .. . . . . . . . . . . . . . . . . . . .41294-4979 .. . . . . . . . . . . . . . . . . . . .72294-4980 .. . . . . . . . . . . . . . . . . . . .72294-4981 .. . . . . . . . . . . . . . . . . . . .72294-4982 .. . . . . . . . . . . . . . . . . . . .72294-5338 .. . . . . . . . . . . . 784–785294-5348 .. . . . . . . . . . . . . . . . . . 785294-5350 .. . . . . . . . . . . . . . . . . . 785294-8262 .. . . . . . . . . . . . . . . . . . 784295-3230 .. . . . . . . . . . . . 793–794295-3292 .. . . . . . . . . . . . 793–795295-3295 .. . . . . . . . . . . . 793–795295-7802 .. . . . . . . . . . . . . . . . . . 306295-9963 .. . . . . . . . . . . . . . . . . . 143295-9964 .. . . . . . . . . . . . . . . . . . 143295-9965 .. . . . . . . . . . . . . . . . . . 143295-9967 .. . . . . . . . . . . . . . . . . . 143295-9968 .. . . . . . . . . . . . . . . . . . 143296-0068 .. . . . . . . . . . . . . . . . . . . .16296-1372 .. . . . . . . . . . . . . . . . . . 143296-1373 .. . . . . . . . . . . . . . . . . . 143296-1396 .. . . . . . . . . . . . . . . . . . 143296-4359 .. . . . . . . . . . . . . . . . . . 622296-4360 .. . . . . . . . . . . . . . . . . . 622

296-4361 ... . . . . . . . . . . . . . . . . 616296-4362 ... . . . . . . . . . . . . . . . . 616296-7488 ... . . . . . . . . . . . . . . . . 778296-7489 ... . . . . . . . . . . . . . . . . 778297-0129 ... . . . . . . . . . . . . . . . . 622297-0130 ... . . . . . . . . . . . . . . . . 622297-8453 ... . . . . . . . . . . . . . . . . . .70297-8454 ... . . . . . . . . . . . . . . . . . .70297-8455 ... . . . . . . . . . . . . . . . . . .70297-8456 ... . . . . . . . . . . . . . . . . . .70297-8457 ... . . . . . . . . . . . . . . . . . .70297-8458 ... . . . . . . . . . . . . . . . . . .70297-8459 ... . . . . . . . . . . . . . . . . . .70297-8460 ... . . . . . . . . . . . . . . . . . .70299-1689 ... . . . . . . . . . . . . . . . . 608299-1690 ... . . . . . . . . . . . . . . . . 616299-4179 ... . . . . . . . . . . 308–3092A-0047 .. . . . . . . . . . . . . . . . . . . 5172A-3241 .. . . . . . . . . . . . . 327, 3452B-7408 .. . . . . . . 348–349, 4592D-0516 .. . . . . . . . . . . . . 267–2682D-0592 .. . . . . . . . . . . . . . . . . . . 7952D-3424 .. . . . . . . . . . . . . . . . . . . 1752F-0023 .. . . . . . . . . . . . . . . . . . . . 3342F-0025 .. . . . . . . . 134–135, 1372F-8509 .. . . . . . . . . . . . . . 798–7992H-1190 .. . . . . . . . .90, 477, 6962H-3757 .. . . . . . . . . . . . . . . . . . . 4992H-3856 .. . . . . . . . . . . . . 131, 4952H-3928 .. .74, 78–85, 87, 89,

206, 212–213, 228,352–353, 380, 390,461, 476, 478, 521,617, 620, 624, 683–

684, 6982H-3931 .. . . . . . . . . . . . . 389–3912H-3934 . 365, 512, 601, 611,

6152H-3935 .. . . . . . . . . . . . . 389–3912H-4145 . 14–15, 17–18, 219,

708, 8212H-6124 .. . . . . . . . . . . . . . . . . . . 6362H-6338 . 152, 331, 350, 365,

379, 431, 443, 460,473–474, 511, 513,521, 671, 681, 694–

695, 7072H-9247 .. . . . . . . 117–128, 3072J-3507. 208, 214, 685, 699–

7002J-8172.. . . . . . . . . . . . . . 807–8082K-2939. . . . . . . . . 189, 196, 1982K-4821. . .828–829, 832–8332K-4973. . . . . . . . . 803, 805, 8082M-0344.. . . . . . . . . . . . . 629, 635

Part Number Index


897

2M-0849.. . . . . 252–254, 289–290, 335, 356, 404,

527, 663, 8252M-2858.. . . . . . . . . . . . . 439, 8222M-5652.. . . . . . . 387, 616, 6192M-5656.. 182, 189, 387–3892M-5657..386–387, 702–7032M-6007.. . . . . . . . . . . . . . . . . . . 3182M-6008.. . . . . . . . . . . . . . . . . . . 3182M-7099.. . . . . . . . . . . . . . . . . . . 3782M-7100.. . . . . . . . . . . . . . . . . . . 3782M-7689.. . . . . . . . . . . . . . . . . . . 5102M-7690.. . . . . . . . . . . . . . . . . . . 5102M-8810.. . . . . . . . . . . . . 376, 7042P-0347. . .19, 152, 282, 316–

318, 329–331, 348–350, 364–365, 378–380, 382–383, 389–391, 411, 419–420,424, 430–431, 440–443, 458, 460, 473–474, 509–512, 520–522, 628, 632, 635,641, 647, 653, 660,669–671, 680–681,692–695, 706–708,

8272P-2506. . . . . . . . . . . . . . . 844, 8572P-3201. . 319, 332, 352–354,

366–368, 420, 426,432, 461–462, 478,496, 513–515, 662,673–674, 683–684,

697–698, 8272P-3514. . 129, 365, 492, 511,

6942P-3538. . . . . . . . . 493, 511, 6942P-4092. . . . . . . . . . . . . . . . . . . . . 5192P-4093. . . . . . . . . . . . . . . . . . . . . 5192P-6026. . . . . . . . . 374, 519, 7022P-8045. . 332, 354, 432, 462,

6732P-8048. . 352–353, 461, 478,

683–684, 6982P-8052. . . . . . . . . . . . . . . . . . . . . 3812P-9419. . . . . . . . 386, 616–617,

622–6232P-9423. . . . . . . . . . . . . . . . . . . . . 3862P-9424. . . . . . . . . . . . . . . . . . . . . 3862P-9484. . . . . . . . . . . . . . . 373, 5182P-9486. . . . . . . . . . . . . . . 373, 5182P-9653. . . . . . . . 357, 359–360,

502–5032P-9654. . . . . . . . 357, 359–360,

502–503

2P-9655. . . . . . . . 357, 359, 361,502–503

2P-9656. . . . . . . . 358–359, 361,502–503

2P-9669. . . . . . . . . . . . . . . . . . . . . 5352P-9670. . 114, 358–361, 487,

503–504, 5352P-9845. . . . . . . . . . . . . . . . . . . . . 6762R-1236. . . . . . . . . . . . . . . 793–7952S-0115. . . . . . . . . . . . . . . 356, 6762S-0205. . . . . . . . . . . . . . . 331, 4312S-0253. . . . . . . . . . . . . . . . . . . . . 3872S-0278. . . . . . . . . . . . . . . . . . . . . 5232S-0736. . 351, 353, 461–462,

534, 683–684, 6982S-2140. . 110, 112, 305–306,

373–374, 487, 518–519

2S-2181. . . .19, 251, 280–282,316–320, 329–332,348–350, 354, 403,410–411, 419–421,424–425, 427, 430–432, 440–442, 459,463, 641, 647, 653,659–662, 670, 672,

674–6752S-2182. . 329–332, 348–349,

354, 430, 432, 440–442, 459, 463, 471–

4732S-5658. . . . . . .43–44, 73, 205,

211, 228, 279, 409–410, 641–642, 648,

654, 661–6622S-5959. . . . . . . . . . . . . . . 327, 3452S-5960. . . . . . . . . . . . . . . 327, 3452S-6345. . . . . . . . . . . . . . . . . . . . . 5192S-7579. . . . . . . . . 327–328, 3452V-0250. . . . . . . . . . . . . . . 702–7032V-1221. . . . . . . . . . . . . . . . . . . . . 6932V-1687. . . . . . . . . . . . . . . . . . . . . 7042V-3819. . . . . . . . . . . . . . . 278, 3142V-5114. . . . . . . . . 346, 457, 4702V-8627. . . . . . . . . . . . . . . 680, 6922W-1145 .. . . . . . . . . . . . . . . . . . 768300-0417 .. . . . . . . . . . . . . . . . . . . .12300-0418 .. . . . . . . . . . . . . . . . . . . .12300-3658 .. . . . . . . . . . . . . . . . . . 437300-3659 .. . . . . . . . . . . . . . . . . . 437300-3660 .. . . . . . . . . . . . . . . . . . 437300-4538 .. . . . . . 569, 591, 602300-4544 .. . . . . . 569, 591, 602300-4545 .. . . . . . 569, 591, 602300-4611 .. . . . . . 618, 620, 624300-6457 .. . . . . . . . . . . . . . . . . . 577

300-6458 .. . . . . . . . . . . . . . . . . . 577300-8743 .. . . . . . . . . . . . . . . . . . 143300-9112 .. . . . . . . . . . . . . . . . . . 143301-0650 .. . . . . . . . . . . . . . . . . . 251301-0652 .. . . . . . . . . . . . . . . . . . 251301-0654 .. . . . . . . . . . . . . . . . . . 252301-2279 .. . . . . . . . . . . . . . . . . . 624301-2281 .. . . . . . . . . . . . . . . . . . 623301-2283 .. . . . . . . . . . . . . . . . . . 623301-2285 .. . . . . . . . . . . . . . . . . . 624301-2287 .. . . . . . . . . . . . . . . . . . 608301-2293 .. . . . . . . . . . . . . . . . . . 624301-2299 . 599, 608–609, 756301-2301 .. . . . . . . . . . . . . . . . . . 623301-2307 .. . . . . . . . . . . . 599, 608301-4302 .. . . . . . . . . . . . 239–240303-9455 . 238, 240–241, 526304-1870 .. . . . . . . . . . . . . . . . . . 811304-1878 .. . . . . . . . . . . . 811, 814304-1880 .. . . . . . . . . . . . 811, 814304-1882 .. . . . . . . . . . . . 812, 815304-1883 .. . . . . . . . . . . . 811, 814304-1886 .. . . . . . . . . . . . 811, 814304-1894 .811–812, 814–815304-1895 .. . . . . . . . . . . . 811, 814304-1909 .. . . . . . . . . . . . . . . . . . 813304-1916 .. . . . . . . . . . . . . . . . . . 814304-5680 .. . . . . . . . . . . . . . . . . . 140304-5688 .. . . . . . . . . . . . 140–141305-1439 .. . . . . . . . . . . . . . . . . . 271305-1442 .. . . . . . . . . . . . . . . . . . 271305-1443 .. . . . . . . . . . . . 270–271305-1446 .. . . . . . . . . . . . 270–271305-1448 .. . . . . . . . . . . . . . . . . . 271305-1449 .. . . . . . . . . . . . . . . . . . 271305-1450 .. . . . . . . . . . . . . . . . . . 271305-1451 .. . . . . . . . . . . . . . . . . . 271305-1453 .. . . . . . . . . . . . . . . . . . 271305-1454 .. . . . . . . . . . . . . . . . . . 271305-1455 .. . . . . . . . . . . . . . . . . . 271305-1456 .. . . . . . . . . . . . . . . . . . 292305-1458 .. . . . . . . . . . . . . . . . . . 292305-1460 .. . . . . . . . . . . . . . . . . . 292305-1462 .. . . . . . . . . . . . . . . . . . 292305-1463 .. . . . . . . . . . . . . . . . . . 292305-1464 .. . . . . . . . . . . . . . . . . . 292305-1465 .. . . . . . . . . . . . . . . . . . 292305-1466 .. . . . . . . . . . . . . . . . . . 292305-1469 .. . . . . . . . . . . . . . . . . . 292305-1471 .. . . . . . . . . . . . . . . . . . 293305-1473 .. . . . . . . . . . . . . . . . . . 293305-1474 .. . . . . . . . . . . . . . . . . . 292305-1475 .. . . . . . . . . . . . . . . . . . 292305-9253 .. . . . . . . . . . . . . . . . . . 806305-9254 .. . . . . . . . . . . . . . . . . . 806305-9256 .. . . . . . . . . . . . . . . . . . 810

305-9261 .. . . . . . . . . . . . . . . . . . 796305-9262 .. . . . . . . . . . . . . . . . . . 796305-9270 .. . . . . . . . . . . . . . . . . . 793305-9285 .. . . . . . . . . . . . . . . . . . 792305-9363 . 599, 608–609, 756305-9364 . 599, 608–609, 756306-2148 .. . . . 567–568, 575–

576, 584–588, 744306-9425 .. . . . . . 191–192, 194306-9431 .. . . . . . 175, 182, 184306-9433 .. . . . . . . . . . . . 197–198306-9435 .. . . . . . . . . . . . 198–199306-9437 .. . . . . . . . . . . . . . . . . . 150306-9439 .. . . . . . . . . . . . . . . . . . 150306-9441 .. . . . . 145–148, 151,

161, 167–168306-9443 .. . . . . . . . . . . . 167–168306-9445 .. . . . . . . . . . . . 167–168306-9447 .. . . . . . . . . . . . 183–185306-9449 .. . . . . . . . . . . . 183–185306-9451 .. . . . . . . . . . . . 197–198306-9453 .. . . . . . . . . . . . 197–198306-9455 .. . . . . . . . . . . . . . . . . . 199306-9457 .. . . . . . . . . . . . . . . . . . 199307-0761 .. . . . . . . . . . . . . . . . . . 149307-2004 .. . . . . . . . . . . . . . . . . . 181307-2005 .. . . . . . . . . . . . . . . . . . 181307-2007 .. . . . . . . . . . . . . . . . . . 181307-2008 .. . . . . . . . . . . . . . . . . . 181307-2009 .. . . . . . . . . . . . . . . . . . 181307-2010 .. . . . . . . . . . . . . . . . . . 181308-3056 .. . . . . . . . . . . . . . . . . . 537308-3057 .. . . . . . . . . . . . . . . . . . 537308-6229 .. . . . . . . . . . . . . . . . . . 537308-6230 .. . . . . . . . . . . . . . . . . . 537308-6854 .. . . . . . . . . . . . . . . . . . 470309-1281 .. . . . . . . . . . . . . . . . . . 491309-3295 .. . . . . . . . . . . . 798–799309-3296 .. . . . . . . . . . . . . . . . . . 799309-3297 .. . . . . . . . . . . . . . . . . . 799309-3298 .. . . . . . . . . . . . 800–801309-3299 .. . . . . . . . . . . . . . . . . . 800309-7676 .. . . . . . . . . . . . . . . . . . 185309-7677 .. . . . . . . . . . . . . . . . . . 185309-7678 .. . . . . . . . . . . . 185–186309-7679 .. . . . . . . . . . . . 185–186309-7680 .. . . . . . . . . . . . . . . . . . 185310-4269 .. . . . . . . . . . . . . . . . . . 109310-4912 .. . . . . . . . . . . . . . . . . . . .52310-4915 .. . . . . . . . . . . . . . . . . . . .52310-4918 .. . . . . . . . . . . . . . . . . . . .52310-5823 .. . . . . . . . . . . . . . . . . . 195310-5824 .. . . . . . . . . . . . . . . . . . 195310-5825 .. . . . . . . . . . . . . . . . . . 195310-5826 .. . . . . . . . . . . . . . . . . . 195310-5827 .. . . . . . . . . . . . . . . . . . 195

898

Part Number Index


310-5828 .. . . . . . . . . . . . . . . . . . 195310-5829 .. . . . . . . . . . . . . . . . . . 195310-5830 .. . . . . . . . . . . . . . . . . . 195310-5831 .. . . . . . . . . . . . . . . . . . 195310-5832 .. . . . . . . . . . . . . . . . . . 195310-5833 .. . . . . . . . . . . . . . . . . . 195310-5834 .. . . . . . . . . . . . . . . . . . 195310-5835 .. . . . . . . . . . . . . . . . . . 195310-5836 .. . . . . . . . . . . . . . . . . . 195310-5837 .. . . . . . . . . . . . . . . . . . 195310-5838 .. . . . . . . . . . . . . . . . . . 195310-5839 .. . . . . . . . . . . . . . . . . . 195310-5840 .. . . . . . . . . . . . . . . . . . 195310-6654 .. . . . . . . . . . . . . . . . . . 533310-7375 .. . . . . . . . . . . . . . . . . . 287310-7376 .. . . . . . . . . . . . . . . . . . 287310-7502 .. . . . . . . . . . . . . . . . . . 254310-7503 .. . . . . . . . . . . . . . . . . . 254310-8310 .. . . . . . . . . . . . . . . . . . 447310-8311 .. . . . . . . . . . . . . . . . . . 447310-8312 .. . . . . . . . . . . . . . . . . . 447310-8534 .. . . . . . . . . . . . 308–309311-2557 .. . . . . . . . . . . . 308–309311-8150 .. . . . . . 596–599, 753312-2269 .. . . . . . . . . . . . . . . 6, 275312-2270 .. . . . . . . . . . . . . . . . . . . . . 6312-2271 .. . . . . . . . . . . . . . . 6, 275312-2273 .. . . . . . . . . . . . . . . . . . . . . 6312-2274 .. . . . . . . . . . . . . . . . . . 275313-4542 .. . . . . . . . . . . . . . . . . . . .41313-4543 .. . . . . . . . . . . . . . . . . . . .41313-4548 .. . . . . . . . . . . . . . . . . . . .12314-5462 .. . . . . . . . . . . . 116, 144314-5466 .. . . . . . . . . . . . 147–148314-5467 .. . . . . . . . . . . . 147–148314-7841 .. . . . . . . . . . . . . . . . . . 533315-6693 .. . . . . . . . . . . . . . . . . . 375316-1443 .. . . . . . . . . . . . . . . . . . 533316-3369 .. . . . . . . . . . . . . . . . . . 195316-3370 .. . . . . . . . . . . . 191–192316-8674 .. . . . . . . . . . . . . . . . . . 148317-1018 .. . . . . . . . . . . . . . . . . . 143317-1019 .. . . . . . . . . . . . . . . . . . 143317-1020 .. . . . . . . . . . . . . . . . . . 143317-1021 .. . . . . . . . . . . . . . . . . . 143317-1030 .. . . . . . . . . . . . 142, 159317-1031 .. . . . . . . . . . . . . . . . . . 142317-1033 .. . . . . . . . . . . . . . . . . . 143317-9078 . 351, 460, 683, 697317-9079 .. . 88–89, 351, 460,

475, 682317-9080 .. . . . . . . . . . . . . .88, 475317-9444 .. . . . . . . . . . . . 115, 489317-9445 .. . . . . . . . . . . . 115, 489317-9450 .. . . . . . . . . . . . 115, 489317-9451 .. . . . . . . . . . . . 115, 489

318-1064 .. . . . . . . 62, 465–466318-2375 .. . . . . . . . . . . . . . . 31–32318-2486 .. . . . . . . . . . . . 295, 299318-2558 .. . . . . . 596–599, 753318-2559 .. . . . . . . . . . . . 596–599318-5033 .. . . . . . . . . . . . . . . . . . 140320-3053 .. . . . . . . . . . . . . . . . . . 179320-3054 .. . . . . . . . . . . . . . . . . . 179320-3541 .. . . . . . . . . . . . . . . . . . 192320-3542 .. . . . . . . . . . . . . . . . . . 192320-3543 .. . . . . . . . . . . . 192–193320-8514 .. . . . . . . . . . . . . . . . . . 800320-8532 .. . . . . . . . . . . . 800–801321-1462 . 567, 576, 584–588321-1463 .. . . . . . 596–598, 753321-2018 .. . . . . . . . . . . . . . . . . . 140321-2019 .. . . . . . . . . . . . . . . . . . 140321-7448 .. . . . . . . . . . . . 115, 489321-7449 .. . . . . . . . . . . . 115, 489321-7454 .. . . . . . . . . . . . 115, 489321-7455 .. . . . . . . . . . . . 115, 489322-6236 .. . . . . . 639, 645, 651322-6302 .. . . . . . . . . . . . . . . . . . 658322-6304 .. . . . . . . . . . . . . . . . . . 658322-6376 .. . . . . . . . . . . . . . . . . . 669322-7981 .. . . . . . . . . . . . . . . . . . . .70323-0955 .. . . . . . . . . . . . . . . . . . 780323-0956 .. . . . . . . . . . . . . . . . . . 780323-0957 .. . . . . . . . . . . . . . . . . . 780323-0958 .. . . . . . . . . . . . . . . . . . 780323-0959 .. . . . . . . . . . . . . . . . . . 780323-1168 .. . . . . . . . . . . . . . . 44–45323-1169 .. . . . . . . . . . . . . . . 44–45323-1170 .. . . . . . . . . . . . . . . . . . . .74323-1171 .. . . . . . . . . . . . . . . . . . . .74323-5925 .. . . . . . . . . . . . 129, 307323-5928 .. . . . . . . . . . . . 129, 307323-5931 .. . . . . . . . . . . . 130, 307323-8755 .. . . . . . . . . . . . . . . . . . 238323-8756 .. . . . . . 238, 240, 526323-8757 .. . . . . . 238, 240, 526323-8758 . 238, 240, 397, 526323-8759 .. . . . . . 238, 240, 526324-3327 .. . . . . . . . . . . . . . . . . . 306325-8624 .. . . . . . . . . . . . . . . . . . 792325-8625 .. . . . . . . . . . . . . . . . . . 797326-1126 .. . . . . . . . . . . . . . . . . . 115326-1127 .. . . . . . . . . . . . 115, 306326-1128 .. . . . . . . . . . . . . . . . . . 115326-1129 .. . . . . . . . . . . . 115, 306326-1130 .. . . . . . . . . . . . . . . . . . 115326-1131 .. . . . . . . . . . . . . . . . . . 115326-1132 .. . . . . . . . . . . . . . . . . . 115326-1133 .. . . . . . . . . . . . . . . . . . 115326-1134 .. . . . . . . . . . . . 115, 306326-1135 .. . . . . . . . . . . . . . . . . . 115

326-1136 .. . . . . . . . . . . . . . . . . . 115326-1137 .. . . . . . . . . . . . . . . . . . 115326-1138 .. . . . . . . . . . . . 115, 306326-1139 .. . . . . . . . . . . . . . . . . . 115326-1140 .. . . . . . . . . . . . 115, 306326-1141 .. . . . . . . . . . . . . . . . . . 115326-1142 .. . . . . . . . . . . . . . . . . . 115326-1143 .. . . . . . . . . . . . 115, 306326-1144 .. . . . . . . . . . . . . . . . . . 115327-5831 .. . . . . . 277, 295, 299327-5853 .. . . . . . . . . . . . . . . . . . 308327-6077 .. . . . . . . . . . . . . . . . . . 308327-7724 .. . . . . . . . . . . . . . . . . . 798327-7727 .. . . . . . . . . . . . 798–799327-9305 .. . . . . . . . . . . . . . . . . . 305327-9329 .. . . . . . . . . . . . . . . . . . 307327-9330 .. . . . . . . . . . . . . . . . . . 307327-9331 .. . . . . . . . . . . . . . . . . . 307328-3369 .. . . . . . . . . . . . 308–309328-3370 .. . . . . . . . . . . . 308–309329-3980 .. . . . . . . . . . . . . . . . . . 308329-3981 .. . . . . . . . . . . . . . . . . . 308329-3982 .. . . . . . . . . . . . . . . . . . 307329-5408 .. . . . . . . . . . . . 146–147329-5409 .. . . . . . . . . . . . 145–146329-5411 .. . . . . . . . . . . . 146–147329-5412 .. . . . . . . . . . . . 145–146329-9268 .. . . . . . . . . . . . . . . . . . 142329-9269 .. . . . . . . . . . . . 142, 159329-9270 .. . . . . . . . . . . . 142, 159329-9271 .. . . . . . . . . . . . 142, 159329-9272 .. . . . . . . . . . . . 142, 159329-9273 .. . . . . . . . . . . . 142, 159329-9818 .. . . . . . . . . . . . 142, 159330-0580 .. . . . . . . . . . . . . . . . . . 142330-0581 .. . . . . . . . . . . . . . . . . . 142330-0582 .. . . . . . . . . . . . . . . . . . 142330-0583 .. . . . . . . . . . . . . . . . . . 142331-3629 .. . . . . . . . . . . . 115, 489331-3630 .. . . . . . . . . . . . 115, 489331-3631 .. . . . . . . . . . . . 600, 753331-3632 .. . . . . . . . . . . . . . . . . . 600331-3633 .. . . . . . . . . . . . 600, 753331-9804 .. . . . . . . . . . . . . . . . . . 756331-9805 .. . . . . . . . . . . . . . . . . . 756331-9806 .. . . . . . . . . . . . . . . . . . 610332-6008 .. . . . . . . . . . . . 182–183332-6423 .. . . . . . . . . . . . . . . . . . 186332-6424 .. . . . . . . . . . . . . . . . . . 186332-8903 .. . . . . . . . . . . . . . . . . . 561333-5602 .. . . . . . . . . . . . . . . . . . 777333-5606 .. . . . . . . . . . . . . . . . . . 778333-5616 .. . . . . . . . . . . . . . . . . . 773333-5619 .. . . . . . . . . . . . . . . . . . 773333-5623 .. . . . . . . . . . . . . . . . . . 773333-5625 .. . . . . . . . . . . . . . . . . . 773

333-5626 ... . . . . . . . . . . . . . . . . 773333-5628 ... . . . . . . . . . . . . . . . . 773333-5629 ... . . . . . . . . . . . . . . . . 773333-5631 ... . . . . . . . . . . . . . . . . 773333-5632 ... . . . . . . . . . . . . . . . . 773333-5639 ... . . . . . . . . . . . . . . . . 773333-5651 ... . . . . . . . . . . . . . . . . 773333-5653 ... . . . . . . . . . . . . . . . . 773334-5804 ... . . . . . . . . . . . . . . . . 116335-5478 ... . . . . . . . . . . . . . . . . 537335-9246 ... . . . . 554, 572–574335-9247 ... . . . . 554, 572–574337-0986 ... . . . . . . . . . . . . . . . . 201337-0987 ... . . . . . . . . . . . . . . . . 201337-0988 ... . . . . . . . . . . . . . . . . 201337-0989 ... . . . . . . . . . . . . . . . . 201337-9044 ... . . . . . . . . . . . . . . . . 573337-9045 ... . . . . . . . . . . 554, 572338-7441 ... . . . . . . . . . . . . . . . . 309338-7442 ... . . . . . . . . . . . . . . . . 309339-0253 ... . . . . . . . . . . . . . . . . . .70339-0254 ... . . . . . . . . . . . . . . . . . .70339-0255 ... . . . . . . . . . . . . . . . . . .70339-0256 ... . . . . . . . . . . . . . . . . . .70339-0257 ... . . . . . . . . . . . . . . . . . .70339-0258 ... . . . . . . . . . . . . . . . . . .70339-0259 ... . . . . . . . . . . . . . . . . . .70339-0262 ... . . . . . . . . . . . . . . . . . .70339-0263 ... . . . . . . . . . . . . . . . . . .70339-0266 ... . . . . . . . . . . . . . . . . . .70339-0267 ... . . . . . . . . . . . . . . . . . .70339-0268 ... . . . . . . . . . . . . . . . . . .70339-0269 ... . . . . . . . . . . . . . . . . . .70339-2908 ... . . . . . . . . . . . . . . . . . .49339-6072 ... . . . . . . . . . . . . . . . . 130339-6073 ... . . . . . . . . . . . . . . . . 130339-7803 ... . . . . . . . . . . . . . . . . . .45339-9666 ... . . . . . . . . . . . . . . . . 181339-9667 ... . . . . . . . . . . . . . . . . 181340-2777 ... . . . . . . . . . . . . . . . . 309340-2778 ... . . . . . . . . . . . . . . . . 309340-8206 ... . . . . . . . . . . 545, 718340-8242 ... . . . . . . . . . . . . . . . . 624340-8250 ... . . . . . . . . . . . . . . . . 617340-8907 ... . . . . 554, 572–574340-8908 ... . . . . 554, 572–574341-0742 ... . . . . 793, 798–799341-1417 ... . . . . . . . . . . . . . . . . 584342-5014 ... . . . . . . . . . . . . . . . . 792342-5015 ... . . . . . . . . . . . . . . . . 792343-4596 ... . . . . . . . . . . . . . . . . 813344-8848 ... . . . . . . . . . . . . . . . . 774345-2210 ... . . . . . . . . . . . . . . . . 576345-2957 ... . . . . . . . . . . . . . . . . 579345-2964 ... . . . . . . . . . . . . . . . . 579345-9632 ... . . . . . . . . . . . . . . . . 251

Part Number Index


899

346-8807 ..20, 220, 282, 411,425, 823

347-0406 ..20, 220, 282, 411,425

347-4170 ..20, 220, 282, 411,425

348-1867 . 548, 552, 557, 564348-1868 . 548, 552, 557, 564348-9641 ... . . . . . . . . . . . . . . . . 811351-0886 ... . . . . . . . . . . . . . 74–75351-0955 ... . . . . . 62, 465–466351-0956 ... . . . . . 62, 465–466351-0957 ... . . . . . . . . . . . . . 62–63351-0958 ... . . . . . . . . . . . . . 62–63351-0959 ... . . . . . . . 31–32, 434351-0960 ... . . . . . . . 31–32, 434351-0961 ... . . . . . . . . . . . . . 31–32351-0962 ... . . . . . . . . . . . . . . . . . .31351-8495 ... . . . . . . . . . . . . . . . . 813351-8927 ... . . . . . . . . . . . . . . . . 307351-8928 ... . . . . . . . . . . 306–307352-1130 ... . . . . . . . . . . . . . . . . 796352-3735 ... . . . . . . . . . . . . . . . . 617352-9306 ... . . . . . . . . . . . . . . . . 491352-9703 ... . . . . 178–180, 188352-9707 .164–165, 172–173352-9711 ... . . . . 191–192, 194353-7387 ... . . . . . . . . . . 191–192353-7393 ... . . . . . . . . . . 191–192353-7394 ... . . . . . . . . . . 191–192355-1292 ... . . . . . . . . . . . . . . . . 187355-1293 ... . . . . . . . . . . . . . . . . 187355-1294 ... . . . . . . . . . . . . . . . . 187355-1295 ... . . . . . . . . . . . . . . . . 187355-1651 ... . . . . . . . . . . . . . . . . . .41355-6790 ... . . . . . . . . . . . . . . . . 783356-3431 ... . . . . . . . . . . . . . . . . . .42356-3432 ... . . . . . . . . . . . . . . . . . .42356-5714 ... . . . . . . . . . . . . . . . . 195356-5716 ... . . . . . . . . . . . . . . . . 195356-5718 ... . . . . . . . . . . . . . . . . 195356-5719 ... . . . . . . . . . . . . . . . . 195356-5720 ... . . . . . . . . . . . . . . . . 195356-5721 ... . . . . . . . . . . . . . . . . 195356-5722 ... . . . . . . . . . . . . . . . . 195356-5723 ... . . . . . . . . . . . . . . . . 195356-5724 ... . . . . . . . . . . . . . . . . 195356-5726 ... . . . . . . . . . . . . . . . . 195356-5727 ... . . . . . . . . . . . . . . . . 195356-5728 ... . . . . . . . . . . . . . . . . 195356-5729 ... . . . . . . . . . . . . . . . . 195356-5730 ... . . . . . . . . . . . . . . . . 195357-0232 ... . . . . . . . . . . . . . . . . 811357-0233 ... . . . . . . . . . . . . . . . . 813357-0244 ... . . . . . . . . . . . . . . . . 811357-0284 ... . . . . . . . . . . . . . . . . 794

357-5368 .. 19, 296–297, 300357-6310 .. . . . . . . . . . . . . . . . . . 150357-6311 .. . . . . . . . . . . . . . . . . . 150357-7550 .. . . . . . . . . . . . . . . . . . 620357-9606 .. . . . . . . . . . . . . . . . . . 251358-6555 .. . . . . . . . . . . . 191–192358-6556 .. . . . . . . . . . . . 191–192358-8556 .. . . . . . . . . . . . 296, 300358-8557 .. . . . . . . . . . . . 296, 300359-9579 .. . . . . . . . . . . . 167–168360-2308 . 138–139, 141, 158360-2472 .. . . . . . 191, 193–194360-2473 .. . . . . . 191, 193–194360-2872 .. . . . . . . . . . . . . . . . . . 195360-2873 .. . . . . . . . . . . . . . . . . . 195360-2874 .. . . . . . . . . . . . . . . . . . 195360-3534 .. . . . . . . . . . . . 300, 303361-3976 .. . . . . . . . . . . . 296, 299361-3977 .. . . . . . . . . . . . 296, 299361-6776 .. . . . . . . . . . . . . . . . . . 193362-0515 .. . . . . . . . . . . . 282, 296362-3918 .. . . . . . . . . . . . . . . . . . 296363-3569 .. . . . . . . . . . . . . . . . . . 302363-3570 .. . . . . . . . . . . . . . . . . . 302363-4367 .. . . . . . . . . . . . . . . . . . 470363-5921 .. . . . . . . . . . . . . . . . . . 466364-0693 .. . . . . . . . . . . . 305–306364-0851 .. . . . . . . . . . . . . . . . . . 195365-0751 .. . . . . . . . . . . . . . . . . . 303365-0752 .. . . . . . . . . . . . . . . . . . 303365-8401 .. . . . . . . . . . . . . . . . . . 749365-8402 .. . . . . . . . . . . . . . . . . . 749366-3380 .. . . . . . . . . . . . 620, 625367-3419 .. . . . . . . . . . . . . . . . . . 196367-4063 .. . . . . . . . . . . . . . . . . . 760367-8137 .. . . . . . . . . . . . . . . . . . 794367-8185 .. . . . . . . . . . . . . . . . . . 813367-8220 .. . . . . . . . . . . . . . . . . . 813367-8221 .. . . . . . . . . . . . . . . . . . 813367-8223 .. . . . . . . . . . . . . . . . . . 813367-8224 .. . . . . . . . . . . . . . . . . . 813367-8225 .. . . . . . . . . . . . . . . . . . 813367-8226 .. . . . . . . . . . . . . . . . . . 813367-8227 .. . . . . . . . . . . . . . . . . . 813367-8228 .. . . . . . . . . . . . . . . . . . 813367-8229 .. . . . . . . . . . . . . . . . . . 813367-8463 .. . . . . . . . . . . . . . . . . . 195367-8464 .. . . . . . . . . . . . . . . . . . 195368-9791 .. . . . . . . . . . . . . . . . . . 302368-9792 .. . . . . . . . . . . . . . . . . . 303369-4573 .. . . . . . . . . . . . . . . . . . 469369-4574 .. . . . . . . . . . . . . . . . . . 469369-5962 .. . . . . . . . . . . . 193–195370-4381 .. . . . . . . . . . . . . . . . . . 612372-0548 .. . . . . . . . . . . . 295, 299372-1081 .. . . . . . . . . . . . . . . . . . 763

372-3375 .. . . . . . . . . . . . . . . . . . 303372-3874 .. . . . . . . . . . . . 178–180372-3875 .. . . . . . . . . . . . 178–180372-5755 .. . . . . . . . . . . . . . . . . . 798372-5766 .. . . . . . . . . . . . 797–798372-5769 .. . . . . . . . . . . . . . . . . . 797372-5777 .. . . . . . . . . . . . 797–798372-5778 .. . . . . . . . . . . . . . . . . . 797372-5779 .. . . . . . . . . . . . . . . . . . 797372-5783 .. . . . . . . . . . . . . . . . . . 797372-5791 .. . . . . . . . . . . . . . . . . . 813372-5792 .. . . . . . . . . . . . . . . . . . 813372-5793 .. . . . . . . . . . . . . . . . . . 811372-5796 .. . . . . . . . . . . . . . . . . . 813372-5798 .. . . . . . . . . . . . . . . . . . 813372-5926 .. . . . . . . . . . . . 760–763372-5958 .. . . . . . . . . . . . . . . . . . 760372-5983 .. . . . . . . . . . . . . . . . . . 760373-1788 .. . . . . . . . . . . . . . . . . . 760373-7406 .. . . . . . . . . . . . . . . . . . 181373-7407 .. . . . . . . . . . . . . . . . . . 181373-7408 .. . . . . . . . . . . . . . . . . . 181373-7409 .. . . . . . . . . . . . . . . . . . 181373-7410 .. . . . . . . . . . . . . . . . . . 181373-7411 .. . . . . . . . . . . . . . . . . . 181374-3462 .. . . . . . . . . . . . . . . . . . 761374-3463 .. . . . . . . . . . . . . . . . . . 765375-3963 .. . . . . . . . . . . . . . . . . . 760375-5039 .. . . . . . . . . . . . 760, 762375-5889 .. . . . . . . . . . . . . . . . . . 195375-5894 .. . . . . . . . . . . . . . . . . . 192375-5896 .. . . . . . . . . . . . . . . . . . 192375-5898 .. . . . . . . . . . . . . . . . . . 195375-5900 .. . . . . . . . . . . . . . . . . . 195375-5908 .. . . . . . . . . . . . . . . . . . 192375-5910 .. . . . . . . . . . . . . . . . . . 192375-5914 .. . . . . . . . . . . . . . . . . . 192375-5926 .. . . . . . . . . . . . . . . . . . 193375-5928 .. . . . . . . . . . . . . . . . . . 193375-5930 .. . . . . . . . . . . . . . . . . . 195375-5932 .. . . . . . . . . . . . . . . . . . 193375-6431 .. . . . . . . . . . . . 296, 300375-9413 .. . . . . . . . . . . . . . . . . . 813375-9414 .. . . . . . . . . . . . . . . . . . 813375-9415 .. . . . . . . . . . . . . . . . . . 813375-9416 .. . . . . . . . . . . . . . . . . . 813375-9417 .. . . . . . . . . . . . . . . . . . 813375-9418 .. . . . . . . . . . . . . . . . . . 813376-1253 .. . . . . . . . . . . . . . . . . . 115376-1254 .. . . . . . . . . . . . . . . . . . 115376-1261 .. . . . . . . . . . . . 362, 490376-1262 .. . . . . . . . . . . . . . . . . . 362376-1263 .. . . . . . . . . . . . . . . . . . 362376-1264 .. . . . . . . . . . . . . . . . . . 362376-1265 .. . . . . . . . . . . . . . . . . . 362376-1266 .. . . . . . . . . . . . . . . . . . 362

376-1267 .. . . . . . . . . . . . . . . . . . 362376-1268 .. . . . . . . . . . . . . . . . . . 362376-1272 .. . . . . . . . . . . . . . . . . . 116376-1273 .. . . . . . . . . . . . . . . . . . 116376-1274 .. . . . . . . . . . . . . . . . . . 116376-1275 .. . . . . . . . . . . . . . . . . . 116376-1276 .. . . . . . . . . . . . . . . . . . 116376-1277 .. . . . . . . . . . . . . . . . . . 116376-1278 .. . . . . . . . . . . . . . . . . . 116376-1279 .. . . . . . . . . . . . . . . . . . 116376-1280 .. . . . . . . . . . . . . . . . . . 116377-2989 .. . . . . . . . . . . . 364, 492378-8241 .. . . . . . . 64, 209–210378-8242 .. . . . . . . 64, 209–210379-2536 .. . . . . . . . . . . . . . . . . . 760379-2549 .. . . . . . . . . . . . . . . . . . 760379-2552 .. . . . . . . . . . . . . . . . . . 760379-2574 .. . . . . . . . . . . . . . . . . . 760379-2627 .. . . . . . . . . . . . . . . . . . 760379-2885 .. . . . . . 760, 762–763379-4042 .. . . . . . . . . . . . . . . . . . 164379-4044 .. . . . . . . . . . . . . . . . . . 164379-4048 .. . . . . . . . . . . . . . . . . . 165379-4054 .. . . . . . . . . . . . . . . . . . 164379-4058 .. . . . . . . . . . . . . . . . . . 164379-4060 .. . . . . . . . . . . . . . . . . . 165379-8893 .. . . . . . . . . . . . . . . . . . 302379-8894 .. . . . . . . . . . . . . . . . . . 302380-5938 .. . . . . . . . . . . . . . . . . . 178380-5940 .. . . . . . . . . . . . . . . . . . 179380-5942 .. . . . . . . . . . . . . . . . . . 178380-5944 .. . . . . . . . . . . . . . . . . . 179380-5946 .. . . . . . . . . . . . . . . . . . 178380-7971 .. . . . . . . . . . . . . . . . . . 301380-7977 .. . . . . . . . . . . . . . . . . . 303380-7978 .. . . . . . . . . . . . . . . . . . 303380-7986 .. . . . . . . . . . . . . . . . . . 304380-7987 .. . . . . . . . . . . . . . . . . . 304380-7989 .. . . . . . . . . . . . . . . . . . 304381-2756 .. . . . . . . . . . . . . . . . . . 761381-3033 .. . . . . . . . . . . . . . . . . . 762381-3040 .. . . . . . . . . . . . 761, 763381-9191 .. . . . . . . . . . . . . . . . . . 774382-3844 .. . . . . . . . . . . . . . . . . . 765382-6505 .. . . . . . . . . . . . . . . . . . 303382-6506 .. . . . . . . . . . . . . . . . . . 303383-0818 .. . . . . . . . . . . . . . . . . . 111383-6936 .. . . . . . . . . . . . . . . . . . 787383-6937 .. . . . . . . . . . . . . . . . . . 788383-6938 .. . . . . . . . . . . . . . . . . . 787383-6942 .. . . . . . . . . . . . . . . . . . 787383-6943 .. . . . . . . . . . . . . . . . . . 787383-6944 .. . . . . . . . . . . . . . . . . . 787383-6949 .. . . . . . . . . . . . . . . . . . 788383-6951 .. . . . . . . . . . . . . . . . . . 788383-6952 .. . . . . . . . . . . . . . . . . . 787

900

Part Number Index


383-6953 .. . . . . . . . . . . . . . . . . . 787383-6954 .. . . . . . . . . . . . . . . . . . 787383-6955 .. . . . . . . . . . . . . . . . . . 787383-6956 .. . . . . . . . . . . . . . . . . . 787383-6957 .. . . . . . . . . . . . . . . . . . 787383-6959 .. . . . . . . . . . . . . . . . . . 787383-6965 .. . . . . . . . . . . . . . . . . . 787384-2954 .. . . . . . . . . . . . . . . . . . 138384-2960 .. . . . . . . . . . . . . . . . . . 138384-2962 .. . . . . . . . . . . . . . . . . . 139384-2964 .. . . . . . . . . . . . . . . . . . 138384-2968 .. . . . . . . . . . . . . . . . . . 139384-3014 .. . . . . . . . . . . . . . . . . . 195384-3017 .. . . . . . . . . . . . . . . . . . 195384-3018 .. . . . . . . . . . . . . . . . . . 181384-3019 .. . . . . . . . . . . . . . . . . . 181384-3022 .. . . . . . . . . . . . . . . . . . 181384-7390 .. . . . . . . . . . . . 300–301384-7392 .. . . . . . . . . . . . . . . . . . 300384-7393 .. . . . . . . . . . . . . . . . . . 300385-2666 .. . . . . . . . . . . . . . . . . . . .63385-2675 .. . . . . . . . . . . . . . . . . . . .65385-2678 .. . . . . . . . . . . . . . . . . . . .65385-2681 .. . . . . . . . . . . . . . . . . . . .65385-5453 .. . . . . . . . . . . . . . . . . . . .65385-5454 .. . . . . . . . . . . . . . . . . . . .63385-7739 .. . . . . . . . . . . . . . . . . . . .65385-7740 .. . . . . . . . . . . . . . . . . . . .63385-7749 .. . . . . . . . . . . . . . . . . . . .63385-7750 .. . . . . . . . . . . . . . . . . . . .63386-0584 .. . . . . . . . . . . . . . . . . . 763386-0637 .. . . . . . . . . . . . 763–764386-0782 .. . . . . . . . . . . . . . . . . . 764386-0791 .. . . . . . . . . . . . . . . . . . 763386-0792 .. . . . . . . . . . . . . . . . . . 764386-0854 .. . . . . . . . . . . . . . . . . . 763389-6862 .. . . . . . . . . . . . . . . . . . 574389-7561 .. . . . . . . . . . . . 793, 795389-7577 .. . . . . . . . . . . . . . . . . . 792389-7585 .. . . . . . . . . . . . 794–795389-7586 .. . . . . . . . . . . . 793–794389-7587 .. . . . . . . . . . . . . . . . . . 793389-7588 .. . . . . . . . . . . . . . . . . . 793389-7620 .. . . . . . . . . . . . 811, 814389-7621 .. . . . . . 811–812, 814389-7622 .. . . . . . . . . . . . 812, 815389-7623 .. . . . . . . . . . . . 812, 815389-7624 .. . . . . . . . . . . . 812, 815390-2333 .. . . . . . . . . . . . . . . . . . 762390-2335 .. . . . . . . . . . . . . . . . . . 763390-9143 .. . . . . . . . . . . . . . . . . . 608390-9144 .. . . . . . . . . . . . . . . . . . 608391-3168 .. . . . . . . . . . . . . . . . . . 784391-3924 .. . . . . . . . . . . . . . . . . . . .65391-3925 .. . . . . . . . . . . . . . . . . . . .65391-3927 .. . . . . . . . . . . . . . . . . . . .65

391-3928 .. . . . . . . . . . . . . . . . . . . .65391-3968 .. . . . . . . . . . . . . . . . . . 140391-3969 .. . . . . . . . . . . . . . . . . . 140391-3970 .. . . . . . . . . . . . . . . . . . 140392-9537 .. . . . . . . . . . . . 538, 564393-2171 .. . . . . . . . . . . . 762–763393-2172 .. . . . . . . . . . . . 762–763393-6257 .. . . . . . . . . . . . . . . . . . 195393-6356 .. . . . . . . . . . . . . . . . . . 195393-6358 .. . . . . . . . . . . . . . . . . . 193393-6360 .. . . . . . . . . . . . . . . . . . 195393-6361 .. . . . . . . . . . . . . . . . . . 195393-6362 .. . . . . . . . . . . . . . . . . . 193395-1044 .. . . . . . . . . . . . . . . . . . 192395-1046 .. . . . . . . . . . . . . . . . . . 192395-1048 .. . . . . . . . . . . . . . . . . . 192395-1050 .. . . . . . . . . . . . . . . . . . 192395-1052 .. . . . . . . . . . . . . . . . . . 192395-3569 .. . . . . . . . . . . . . . . . . . 608395-3570 .. . . . . . . . . . . . . . . . . . 608395-4325 .. . . . . . . . . . . . . . . . . . . .87395-4326 .. . . . . . . . . . . . . . . . . . . .87396-4170 .. . . . . . . . . . . . . . . . . . . .47396-6224 .. . . . . . . . . . . . . . . . . . 775396-6233 .. . . . . . . . . . . . . . . . . . 775396-7353 .. . . . . . . . . . . . . . . . . . . .88396-9400 .. . . . . . . . . . . . . . . . . . 775396-9401 .. . . . . . . . . . . . . . . . . . 775396-9703 .. . . . . . . . . . . . . . . . . . . .65396-9704 .. . . . . . . . . . . . . . . . . . . .65397-2382 .. . . . . . . . . . . . . . . . . . 775397-9556 .. . . . . . . . . . . . . . . . . . . .43397-9557 .. . . . . . . . . . . . 116, 144398-0972 .. . . . . . . . . . . . . . . . . . . .73398-1441 .. . . . . . . . . . . . . . . . . . 775398-1442 .. . . . . . . . . . . . . . . . . . 775398-5218 .. . . . . . . . . . . . . . . . . . . .88398-5234 .. . . . . . . . . . . . 179–180398-5235 .. . . . . . . . . . . . . . . . . . 180398-5236 .. . . . . . . . . . . . 180–181398-5240 .. . . . . . . . . . . . . . . . . . 193398-5242 .. . . . . . . . . . . . . . . . . . 193398-5244 .. . . . . . . . . . . . . . . . . . 193398-5248 .. . . . . . . . . . . . . . . . . . 178398-5254 .. . . . . . . . . . . . . . . . . . 179398-5256 .. . . . . . . . . . . . . . . . . . 181398-5257 .. . . . . . . . . . . . . . . . . . 181398-5264 .. . . . . . . . . . . . . . . . . . 180398-5266 .. . . . . . . . . . . . . . . . . . 180398-5268 .. . . . . . . . . . . . . . . . . . 180398-5270 .. . . . . . . . . . . . . . . . . . 180398-5272 .. . . . . . . . . . . . . . . . . . 180398-5274 .. . . . . . . . . . . . . . . . . . 180398-5277 .. . . . . . . . . . . . . . . . . . 181398-5278 .. . . . . . . . . . . . . . . . . . 181398-5279 .. . . . . . . . . . . . . . . . . . 181

398-5280 .. . . . . . . . . . . . . . . . . . 181398-5281 .. . . . . . . . . . . . . . . . . . 181398-5282 .. . . . . . . . . . . . . . . . . . 181398-5285 .. . . . . . . . . . . . . . . . . . 181398-5286 .. . . . . . . . . . . . . . . . . . 181398-5287 .. . . . . . . . . . . . . . . . . . 181398-5288 .. . . . . . . . . . . . . . . . . . 181398-5289 .. . . . . . . . . . . . . . . . . . 181398-5290 .. . . . . . . . . . . . . . . . . . 181398-8314 .. . . . . . . . . . . . . . . . . . 181398-8315 .. . . . . . . . . . . . . . . . . . 181398-8316 .. . . . . . . . . . . . . . . . . . 181398-8317 .. . . . . . . . . . . . . . . . . . 181398-8318 .. . . . . . . . . . . . . . . . . . 181398-8319 .. . . . . . . . . . . . . . . . . . 181398-8323 .. . . . . . . . . . . . 178–179398-8324 .. . . . . . . . . . . . 178–179398-8325 .. . . . . . . . . . . . . . . . . . 194398-8326 .. . . . . . . . . . . . . . . . . . 194398-8327 .. . . . . . . . . . . . . . . . . . 194398-8328 .. . . . . . . . . . . . . . . . . . 194399-5056 .. . . . . . . . . . . . . . . . . . 612399-5952 .. . . . . . . . . . . . 151, 153399-7400 .. . . . . . . . . . . . . . . . . . 193399-7402 .. . . . . . . . . . . . . . . . . . 193399-7410 .. . . . . . . . . . . . . . . . . . 195399-7414 .. . . . . . . . . . . . . . . . . . 195399-7416 .. . . . . . . . . . . . . . . . . . 195399-8030 .. . . . . . . . . . . . . . . . . . 195399-9397 .. . . . . . . . . . . . . . . . . . 775399-9398 .. . . . . . . . . . . . . . . . . . 7753A-4129 .. . . . . . . . . . . . . . . . . . . 6583A-4131 .. . . . . . . . . . . . . . . . . . . 6563A-4132 .. . . . . . . . . . . . . . . . . . . 6563A-4133 .. . . . . . . . . . . . . . . . . . . 6563A-4790 .. . . . . . . . . . . . . . . . . . . 6593A-8962 .. . . . . . . . . . . . . . . . . . . 5433A-8967 .. . . . . . . . . . . . . . . . . . . 5433A-8968 .. . . . . . . . . . . . . . . . . . . 5433A-8969 .. . . . . . . . . . . . . . . . . . . 5433A-9605 .. . . . . . . 781–782, 8183A-9614 .. . . . . . . 781–782, 8183A-9615 .. . . . . . . 781–782, 8183A-9616 .. . . . . . . 781–782, 8183A-9617 .. . . . . . . 781–782, 8183B-1915 .. . . . . . . 364, 509–5103B-2968 .. . . . . . . . . . . . . . . . . . . 6823B-4506 .. . . . . . 250, 316–318,

329–330, 348, 364,403, 418–419, 430,458, 509–510, 670,693, 830, 834, 838

3B-4508 . 333–334, 348–349,355–356, 378, 381–382, 459, 464, 520,

706, 766, 773–774,803–806, 809

3B-4510 .. . . . . . 321, 334, 369,516–517, 523, 642,

648, 654, 7103B-4512 .. . . . . . . . . . . . . . . . . . . 3213B-4514 ..381–385, 392–3933B-4516 .. . . . . . . . . . . . . . . . . . . 7403B-8489 .. . . . . . . . . . . . . . . . . . . 8393D-4603 . 545, 778, 788–789,

8193E-4356.. . 308–309, 811, 8143E-4370.. . . . . . . . 785–786, 8193E-8032.. . . . . . . . 628, 631–6333H-2643 .. . . . . . . . . . . . . . . . . . . 3283H-7654 . 174, 182, 184, 189,

390–391, 522, 7093K-0453. . . . . . . . . . . . . . . . . . . . . 8263K-0715. . . . . . . . . . . . . . . 196, 1983K-2866. . . . . . . . . . . . . . . 315–3173K-2889. . . 27–28, 30, 57–58,

61, 223, 2353K-4221. . . . . . . . . . . . . . . . . . . . . 3333K-4222. . . . . . . . . . . . . . . . . . . . . 3333K-5234. . 155, 176, 186, 382,

391, 7003K-5235. . . . . . . . . . . . . . . . . . . . . 3813K-6060. . . . . . . . . . . . . . . 803, 8063K-6113. . . . . . . . 117–121, 123,

125–128, 144, 146,148–150, 160, 167,

3073K-6620. . . . . . . . . . . . . . . 317–3183K-6638. . . .19, 282, 318, 411,

420, 424, 640, 646,652, 660, 671, 827

3N-0837 .. . . . . . . . . . . . . . . . . . . 6903N-3095 .. . . . . . 248–249, 251,

253–254, 402, 404,663

3N-6411 .. 250, 282, 793, 7953N-6412 .. 250, 282, 793, 7953P-0615. . . . . . . . . . . . . . . . . . . . . 5353P-0616. . . . . . . . . . . . . . . . . . . . . 5353P-0617. . . . . . . . . . . . . . . . . . . . . 5353P-0618. . . . . . . . . . . . . . . . . . . . . 5353P-0620. . . . . . . . . . . . . . . . . . . . . 5353P-0621. . . . . . . . . 358, 503, 5353P-0622. . 358, 360, 485–486,

503–504, 5353P-0623. . 358, 360, 485–486,

503–504, 535, 599,608–609, 756

3P-0628. . . . . . . . . . . . . . . 502, 5353P-0815. . . . . . . . . . . . . . . 794, 7963P-0955. . . . . . . . . . . . . . . 359–360

Part Number Index


901

3P-1088. . . . . . . . . 338–339, 4533P-1104. . 337, 341, 452, 455,

468–469, 5323P-1109. . . . . . . . . . . . . . . 468, 5323P-1111. . . . . . . . . . . . . 64, 67–683P-1112. . 337–338, 340, 451,

453–454, 677, 6893P-1113. . 337–338, 340, 451,

453–454, 677, 6893P-1133. . . . . . . . . . . . . . . . .73, 3463P-1134. . . . . . . . . . . . . . . . .73, 3463P-1847. . 189, 197, 383, 389,

391–392, 593, 672–673

3P-1848. . 383, 389, 391–392,593, 672–673

3P-1849. . . . . . . . . . . . . . . . . . . . . 6353P-1900. . 347, 458, 471–472,

6933P-2274. . . . . . . . 277, 310–311,

323–324, 326, 343–344, 415–416, 422–423, 428–429, 437,456, 505–506, 529–

5303P-2482. . . . . . . . . . . . . . . 190, 2003P-3043. . 323, 326, 342–343,

428, 455–456, 505–506

3P-3044. . 323, 326, 342–343,428, 455–456, 505–

5063P-3045. . . . . . . . 323–324, 326,

342–343, 428, 455–456, 505–506

3P-3046. . . . . . . . 323–324, 326,342–343, 428, 455–

456, 505–5063P-3327. . . . . . . . . . . . . . . 387–3883P-3399. . . . . . . . . . . . . . . . . . . . . 3893P-3402. . . . . . . . . . . . . . . . . . . . . 3893P-3403. . . . . . . . . . . . . . . . . . . . . 3893P-3419. . . . . . . . . . . . . . . . . . . . . 7413P-3804. . . . . . . . . . . . . . . . . . . . . 5233P-3836. . . . . . . . . . . . . . . . . . . . . 5233P-3878. . 323, 325, 342–343,

428–429, 437, 455,505, 529

3P-3889. . . . . . . . . . . . . . . . . . . . . 5303P-3890. . . . . . . . . . . . . . . . . . . . . 5303P-3891. . . . . . . . . . . . . . . . . . . . . 5303P-3892. . . . . . . . . . . . . . . . . . . . . 5303P-3896. . . . . . . . . . . . . . . . . . . . . 5303P-4133. . . . . . . . . . . . . . . 109, 3563P-4134. . . . . . . . . . . . . . . . . . . . . 3343P-4866. . . . . . . . . . . . . . . 387–388

3P-5757. . . . . . . . 323–324, 326,343–344, 428, 456

3P-5762. . . . . . . . . 323–324, 5293P-5927. . . . . . . . . . . . . . . 338–3393P-6123. . . . . . . . . . . . . . . . . . . . . 3883P-6600. . . . . . . . . . . . . . . . . . . . . 7103P-6954. . . . . . . . . . . . . . . . . . . . . 3923P-6955. . . . . . . . . . . . . . . . . . . . . 3923P-7153. . 323–324, 326–327,

342–344, 428, 455–457, 505–506, 666

3P-7154. . 323–324, 326–327,342–344, 428, 455–457, 505–506, 666

3P-7155. . 324, 327, 344, 457,666

3P-7156. . 324, 327, 344, 457,666

3P-8272. . 329–330, 348–349,430, 439–442, 459,

6693P-8283. . . . . . . . . . . . . . . . . . . . . 1563P-8432. . 364, 492, 508–510,

680, 6923P-8680. . . . . . . . . . . . . . . . . . . . . 7953P-8681. . . . . . . . . . . . . . . . . . . . . 7953Q-5391 ... . . . . . . .73, 346, 6793Q-6992 ... . . . . . . . . . . . . . . . . . 6003Q-6993 ... . . . . . 577, 590, 7453S-1307. . . . . . . . . . . . . . . . . . . . . . .503S-1349. . 145–148, 150–151,

161, 167–168, 175,190, 196

3S-1356. . . . . . . . . . . . . . . . . . . . . 1963S-7090. . . . . . . . . . . . . . . 363, 5083S-7461. . . . . . . . . . . . . . . 388–3893S-7837. . . . . . . . . . . . . . . 376–3773S-8182. . . .13, 219, 295, 328,

347, 423, 458, 470,508, 531, 534

3S-8252. . . . . . . . . 363, 507–5083S-9138. . . . . . . . . . . . . . . 363, 5083S-9139. . . . . . . . . . . . . . . 363, 5083S-9140. . . . . . . . . . . . . . . . . . . . . 3633S-9199. . . . . . . . . . . . . . . . . . . . . 5073S-9993. . . . . . . . . . . . . . . . . . . . . 3633T-0356 .. . . . . . . . . . . . . . . . . . . . . .133T-0358 .. . . . . . . . . . . . . . . . . . . . . .133T-0360 .. . . . . . . . . .13, 277, 4093T-1248 .. . . . . . . . . . . . . . . . . . . . 1893T-3206 .. 349, 474, 534, 681,

6953T-3207 .. 331, 349–350, 431,

443, 460, 474, 512,670, 681, 695

3T-3646 .. . . . . . . . . . . . . . . . . . . . 658

3T-3647 .. . . . . . . . . . . . . . . . . . . . 6583T-3648 .. . . . . . . . . . . . . . . . . . . . 6583T-3690 .. . . . . . . . . . . . . . 346, 5303T-3799 .. 131, 471–473, 492,

494–4973T-3800 .. 131, 471–473, 492,

494–4973T-3884 .. . . . . . 7, 9–11, 38–403T-3889 .. . . . . 7, 9–11, 38–40,

216–2173T-4283 .. 251–254, 403, 663,

825, 831, 8353T-4427 .. . . . . . . . . . . . . . . . . . . . 3293T-4428 .. . . . . . . . . . . . . . . . . . . . 3293T-4617 .. . . . . . . . . . . . . . . . . . . . 6603T-4618 .. . . . . . . . . . . . . . . . . . . . 6603T-5128 .. . . . . . . . . . . . . . . . . . . . 1073T-5631 .. . . . . . . . . . . . . . . .40, 2253T-5634 .. . . . . . . . . . . . . . . .11, 2173T-5970 .. . . . . . . . . . . . . . . . . . . . 3873T-5971 .. . . . . . . . . . . . . . . . . . . . 3873T-6269 .. . . . . . . . 152, 520, 7073T-6292 .. . 191, 193–194, 6313T-6308 .. . . . . . . . . . . . . . 702–7033T-7192 .. . . . . . . . . . . . . . . . . . . . 1323T-7195 .. . . . . . . . . . . . . . . . . . . . 1323T-7392 .. . . . . . . . 130, 495, 6963T-7710 .. . . . . . . . . . . . . . . . . . . . 1323T-7711 .. . . . . . . . . . . . . . . . . . . . 1323T-8405 .. . . . . . . . . . . . . . . .39, 2253T-8406 .. . . . . . . . . . . . . . . .40, 2253T-8491 .. . . . . . . . . . . . . . . . . . . . 7043T-8493 .. . . . . . . . . . . . . . . . . . . . 1733T-8494 .. . . . . . . . . . . . . . . . . . . . 3873T-8496 .. . . . . . . . . . . . . . . . . . . . 1733T-8497 .. . . . . . . . . . . . . . . . . . . . 3873T-8499 .. . . . . . . . . . . . . . . . . . . . 1733T-8501 .. . . . . . . . . . . . . . . . . . . . 1743T-8502 .. . . . . . . . . . . . . . . . . . . . 1743T-8556 .. . . . . . . . . . . . . . . . . . . . 3873T-8557 .. . . . . . . . . . . . . . . . . . . . 3873T-8558 .. . . . . . . . . . . . . . . . . . . . 3873T-8559 .. . . . . . . . . . . . . . . . . . . . 3873T-8560 .. . . . . . . . . . . . . . . . . . . . 3873T-8561 .. . . . . . . . . . . . . . . . . . . . 3873T-8562 .. . . . . . . . . . . . . . . . . . . . 3873T-8563 .. . . . . . . . . . . . . . . . . . . . 3873T-8564 .. . . . . . . . . . . . . . . . . . . . 3873T-8565 .. . . . . . . . . . . . . . . . . . . . 3873T-8580 .. . . . 38–40, 225–227,

4343T-8584 .. . . . . . . . . . . . . . . .42, 2283T-8586 .. . . . . . . . . . . . . . . .42, 2283T-8590 .. . . . . . . . . . . . . . . . . . . . . .433T-8597 .. . . . . . . . . . . . . . . .42, 228

3T-8601 ...7–12, 38–40, 216–218, 225–227, 273–274, 276, 407–409,

4343T-9075 ... . . . . . . 189, 197–1983T-9118 ... . . . . . . 139, 158–1593T-9152 ... . . . . . . . . . . . . . . . . . . 6693T-9153 ... . . . . . . 658, 669, 8263T-9154 ... . . . . . . . . . . . . . . . . . . 6583T-9529 ... . . . . . . . . . . . . . . . . . . 1903T-9530 ... . . . . . . . . . . . . . . . . . . 1903T-9536 ... 14–18, 44–46, 50,

219, 229, 821–8223T-9538 ... . .21, 220, 412, 4253T-9875 ... . . . . . . . .53, 232, 4453T-9877 ... . . . . . . . .53, 232, 4453V-1133... . . . . . . 334, 356, 4643V-1727... . . . . . . . . . . . . . . . . . . 6693V-2093... . . . . . . . . . . . . . . . . . . 4583V-4045... . . . . . . . . . . . . . . . . . . 8403V-4527... . . . . . . . . . . . . . . . . . . 6913V-4745... . . . . . . . . . . . . . . . . . . 6763V-4746... . . . . . . . . . . . . . . . . . . 6763V-4764... . . . . . . . . . . . . . . . . . . 6763V-4812... . . . . . . . . . . . . 699–7003V-5029... . . . . . . . . . . . . . . . . . . 6763V-5030... . . . . . . . . . . . . . . . . . . 6763V-5055... . . . . . . . . . . . . . . . . . . 6993V-5073... . . . . . . . . . . . . . . . . . . 6693V-5131... . . . . . . . . . . . . . . . . . . 6693V-5305... . . . . . . 699–700, 7103V-5376... . . . . . . . . . . . . . . . . . . 7053V-7851... . . . . . . . . . . . . . . . . . . 3213V-8998... . . . . . . . . . . . . 664, 6753V-9002... . . . . . . 664, 675–6763V-9011... . . . . . . . . . . . . . . . . . . 6763V-9091... . . . . . . . . . . . . . . . . . . 6753V-9114... . . . . . . . . . . . . . . . . . . 6683V-9489... . . . . . . . . . . . . . . . . . . 6683W-2301 .. . . . . . . . . . 46–47, 513W-4144 .. . . . . . . . . . . . 104–1073W-4346 .. . . . . .14–15, 17–183W-7675 .. . . . . . . . . . . . . . . . . . 4993W-7684 .. . . . . . . . . . . . . . . . . . 4993W-7687 .. . . . . . . . . . . . . . . . . . 4993W-7691 .. . . . . . . . . . . . . . . . . . 4993W-7771 .. . . . . . . . . . . . . . . . . . 5003W-7772 .. . . . . . . . . . . . . . . . . . 5003W-7773 .. . . . . . . . . . . . . . . . . . 5003W-7774 .. . . . . . . . . . . . . . . . . . 5003W-7778 .. . . . . . . . . . . . . . . . . . 4803W-7779 .. . . . . . . . . . . . . . . . . . 4803W-8120 .. . . . . . . . . . . . . . . . . . 4813W-8123 .. . . . . . . . . . . . . . . . . . 4813W-8134 .. . . . . . . . . . . . 480–4813W-8140 .. . . . . . . . . . . . . . . . . . 482

902

Part Number Index


3W-8236 .. . . . . . . . . . . . . . . . . . 4993W-8240 .. . . . . . . . . . . . 497–4993W-8244 .. . . . . . . . . . . . . . . . . . 4993W-8339 .. . . . . . . . . . . . . . . . . . 4973W-8344 .. . . . . . . . . . . . 497–4983W-8396 .. . . . . . . . . . . . . . . . . . 4793W-8398 .. . . . . . . . . . . . . . . . . . 4793W-8399 .. . . . . . . . . . . . . . . . . . 4793W-8407 .. . . . . . . . . . . . 427, 4473W-8410 .. . . . . . . . . . . . 427, 4473W-8489 .. . . . . . . . . . . . . . . . . . 4823W-8492 .. . . . . . . . . . . . . . . . . . 4823W-8495 .. . . . . . . . . . . . 481–4823W-8536 .. . . . . . . . . . . . . . . . . . 4473W-8546 .. . . . . . . . . . . . . . . . . . 5003W-8549 .. . . . . . . . . . . . . . . . . . 5003W-8772 .. . . . . . . . . . . . . . . . . . 4833W-8775 .. . . . . . . . . . . . . . . . . . 4833Y-4297 ... . . . . . . 638, 644, 650415-3600 .. . . . . . . . . . . . . . . . . . 193415-5189 .. . . . . . . . . . . . . . . . . . 772415-5671 .. . . . . . . . . . . . . . . . . . 140415-5681 .. . . . . . . . . . . . . . . . . . 140415-6132 .. . . . . . . . . . . . . . . . . . 145415-6134 .. . . . . . . . . . . . . . . . . . 145416-7042 .. . . . . . . . . . . . . . . . . . . .34416-7043 .. . . . . . . . . . . . . . . . . . . .34416-7044 .. . . . . . . . . . . . . . . . . . . .34416-7045 .. . . . . . . . . . . . . . . . . . . .34416-7050 .. . . . . . . . . . . . . . . . . . . .52417-3770 .. . . . . . . . . . . . . . . . . . . .52419-4806 .. . . . . . . . . . . . . . . . . . . .65420-9357 .. . . . . . . . . . . . . . . . . . 120420-9363 .. . . . . . . . . . . . . . . . . . 120420-9876 .. . . . . . . . . . . . . . . . . . 792420-9877 .. . . . . . . . . . . . . . . . . . 797420-9878 .. . . . . . . . . . . . . . . . . . 802420-9879 .. . . . . . . . . . . . . . . . . . 807421-2561 .. . . . . . . . . . . . . . . . . . 618422-1051 .. . . . . . . . . . . . . . . . . . 130422-1054 .. . . . . . . . . . . . . . . . . . 130422-1129 .. . . . . . . . . . . . . . . . . . 111422-1130 .. . . . . . . . . . . . . . . . . . 111422-1131 .. . . . . . . . . . . . . . . . . . 111422-2665 .. . . . . . . . . . . . . . . . . . 111422-2666 .. . . . . . . . . . . . . . . . . . 111422-2667 .. . . . . . . . . . . . . . . . . . 111422-5504 .. . . . . . . . . . . . . . . . . . 560422-5505 .. . . . . . . . . . . . . . . . . . 560422-6106 .. . . . . . . . . . . . . . . . . . 560422-6107 .. . . . . . . . . . . . . . . . . . 560422-6827 .. . . . . . . . . . . . . . . . . . 560422-7690 .. . . . . . . . . . . . . . . . . . 171422-7691 .. . . . . . . . . . . . . . . . . . 171422-7692 .. . . . . . . . . . . . . . . . . . 171422-7693 .. . . . . . . . . . . . . . . . . . 171

422-8785 .. . . . . . . . . . . . . . . . . . 562422-8790 .. . . . . . . . . . . . . . . . . . 564422-8791 .. . . . . . . . . . . . . . . . . . 563423-9743 .. . . . . . . . . . . . . . . . . . . .66424-0842 .. . . . . . . . . . . . . . . . . . . .64424-0843 .. . . . . . . . . . . . . . . . . . . .64424-0844 .. . .64–65, 209–210424-0845 .. . . . . . . . . . . . 209–210424-0846 .. . . . . . . . . . . . 209–210424-0847 .. . . . . . . . . . 64–65, 69424-3546 .. . . . . . 273, 295, 299424-3547 .. . . . . . . . . . . . 295, 299424-4194 .. . . . . . . . . . . . 788–789424-4197 .. . . . . . . . . . . . 788–789428-0056 .. . . . . . 129, 307, 492430-3220 .. . . . . . . . . . . . 760, 763430-5435 .. . . . . . . . . . . . . . . . . . . .65430-5436 .. . . . . . . . . . . . . . . . . . . .65430-5437 .. . . . . . . . . . . . . . . . . . . .66431-2180 .. . . . . . 575, 588–589431-2181 .. . . . . . 575, 588–589431-2182 .. . . . . . 575, 588–589431-2183 .. . . . . . 575, 588–589431-2184 .. . . . . . . . . . . . . . . . . . 575431-2185 .. . . . . . . . . . . . . . . . . . 589431-2186 .. . . . . . . . . . . . . . . . . . 588431-5267 .. . . . . . 570, 579, 592431-5565 .. . . . . . . . . . . . . . . . . . 592431-5566 .. . . . . . . . . . . . . . . . . . 570433-0303 .. . . . . . . . . . . . . . . . . . . .34433-0304 .. . . . . . . . . . . . . . . . . . . .34433-6740 .. . . . . . . . . . . . . . . . . . 181433-6741 .. . . . . . . . . . . . . . . . . . 181433-6742 .. . . . . . . . . . . . . . . . . . 181433-6743 .. . . . . . . . . . . . . . . . . . 181433-6744 .. . . . . . . . . . . . . . . . . . 181433-6745 .. . . . . . . . . . . . . . . . . . 181437-7832 .. . . . . . . . . . . . . . . . . . 112437-7833 .. . . . . . . . . . . . . . . . . . 112437-7834 .. . . . . . . . . . . . . . . . . . 112442-8258 .. . . . . . . . . . . . . . . . . . 620449-2274 .. . . . . . . . . . . . . . . . . . 602449-2284 .. . . . . . . . . . . . . . . . . . 604449-2293 .. . . . . . . . . . . . . . . . . . 601449-2682 .. . . . . . . . . . . . . . . . . . 597449-2683 .. . . . . . . . . . . . . . . . . . 597454-5842 .. . . . . . . . . . . . . . . . . . 597454-5843 .. . . . . . . . . . . . . . . . . . 597454-5844 .. . . . . . . . . . . . . . . . . . 597467-1381 .. . . . . . . . . . . . . . . . . . 180467-1382 .. . . . . . . . . . . . . . . . . . 180468-0109 .. . . . . . . . . . . . 178–180468-0110 .. . . . . . . . . . . . 178–1804B-3665 .. . . . . . . . . . . . . 802, 8074B-4280 .. . . . . . . . . . . . . 321–3224B-6166 .. . . . . . . 312–313, 417

4B-6620 .. . . . . . . . . . . . . . . . . . . 3754B-7255 .. . . . . . . . . . . . . 380, 5214B-7572 .. . . . . . . . . . . . . . . . . . . 6644B-9371 .. . . . . . . . . . . . . . . . . . . 8394C-2084. . . . . . . . . . . . . . . . . . . . . 6694D-3704 . 251, 322, 334, 371,

421, 464, 675–6764D-3882 . 829–830, 833–834,

837–8384E-0275.. . . . . . . . . . . . . . . . . . . . 7054E-2887.. . . . . . . . . . . . . . 685, 6994E-8500.. . . . . . . . . . . . . . . . . . . . 6924E-8505.. . . . . . . . . . . . . . . . . . . . 6924F-6568 .. . . . . . . . 675, 685, 6994F-7952 .. . 316–318, 419, 6704F-8965 .. . . . . . . . . . . . . . . . . . . . 1264H-9105 .. . . . . . 331, 350, 364,

366–368, 431, 491–494, 496, 509–510,514–515, 625, 680,

692–693, 6974H-9527 . 250, 403, 661, 830,

834, 8384H-9628 . 250, 403, 661, 830,

834, 8384I-4906 .. . . . . . . . . . . . . . . . . . . . 6154I-6514 .. . . . . . . . . . . . . . . . . . . . 6054I-7337 .. . . . . . . . . . . . . . . . . . . . 5444I-7345 .. . . . . . . . . . . . . . . . . . . . 5444I-7472 .. . . . . . . . . . . . . . . . . . . . 5444I-7475 .. . 540–542, 715, 7204I-7476 .. . 540–542, 715, 7204I-7477 .. . 540–542, 715, 7204I-7478 .. . 540–542, 715, 7204I-7488 .. . . . . . . . . . . . . . . . . . . . 5444I-7538 .. .540–542, 715–7164J-0520.. . . . . . . . . . . . . . . . . . . . 8194J-0526.. . . . . . . . 640, 646, 6524K-0173. . . . . . . . . . . . . . . . . . . . . 7084K-0684. . 175, 183–185, 189,

197–1994K-3916. . . . . . . . . . . . . . . 313, 4174K-3918. . . . . . . . . . . . . . . 313, 4174K-3919. . . . . . . . . 312–313, 4174K-5175. . . . . . . . . 174, 182, 1894K-5285. . . . . . . . . . . . . . . 316, 4194K-5286. . . . . . . . . . . . . . . 316, 4194K-7038. . . . . . . . 238, 240–243,

312–313, 396–400,417, 526–527, 657,

824, 8364K-7128. . . . . . . . . . . . . . . 313–3144K-7348. . . . . . . . . . . . . . . 321–3224K-9943. . . 316–317, 419, 6704K-9984. . . . . . . . . 316, 419, 670

4L-6454 .. 259, 261, 263–264,267, 286–287, 290–291, 404–405, 413–414, 803–806, 808–

8094L-9337 .. . . . . . . . . . . . . . 797, 8014M-0061.. . . . . 829–830, 833–

834, 837–8384M-0578.. . . . . . . . . . . . . 390–3914M-0660.. . . . . . . . . . . . . . . . . . . 6364M-0740.. . . . . . . . . . . . . 313, 4174M-5989.. . . . . 338–340, 452–

454, 533, 677, 6894M-5991.. . . . . 338, 340, 453–

454, 533, 678, 6894M-5992.. . . . . . 340, 454, 533,

678, 6894M-6953.. . . . . . . . . . . . . 131, 4954N-1230 .. . . . . . . . . . . . . . . . . . . 6354S-5898. . 131, 153, 162, 170,

382–383, 478, 496,522

4S-6559. . . . . . . 56–58, 61, 2354S-8072. . . . . . . . . . . . . . . 390–3914S-8099. . . . . . . . . . . . . . . . . . . . . 3814S-8101. . . . . . . . . . . . . . . . . . . . . 3914S-8984. . 129, 213, 331, 348,

350, 352–353, 364–369, 380, 431, 443–444, 459–460, 462,471, 474, 478, 492–494, 497, 509–516,521–522, 671, 680,692–698, 705–706

4S-9004. . . . . . . . . . . . . . . . . . . . . 3464S-9005. . . . . . . . . . . . . . . . . . . . . 3634S-9049. . . . . . . . 366–368, 496,

513–515, 6974S-9112. . . . . . . . . . . . . . . . . . . . . 3774S-9692. . . . . . . . . . . . . . . 365, 5124V-4106. . . . . . . . . . . . . . . 315, 4184V-4107. . . . . . . . . . . . . . . 315, 4184V-5374. . . . . . . . . . . . . . . . . . . . . 4304V-5376. . . . . . . . . . . . . . . . . . . . . 4305A-3187 .. . . . . . 238, 240–241,

396–399, 526–527,824, 836–837

5A-7524 .. . . . . . . . . . . . . . . . . . . . .675A-8374 . 331, 350, 431, 443,

459, 512–513, 531,670

5A-8375 .. . . . . . 331, 350, 431,442–443, 459, 512,

6705C-0768. . . . . . . . . . . . . . . . . . . . . 6585C-0949. . . . . . . . . . . . . . . . . . . . . 656

Part Number Index


903

5C-4088. . . . . . . . . . . . . . . 656–6575C-4089. . . . . . . . . . . . . . . . . . . . . 6575C-4092. . . . . . . . . . . . . . . . . . . . . 6575C-4094. . . . . . . . . . . . . . . . . . . . . 6575C-4095. . . . . . . . . . . . . . . . . . . . . 6575C-4314. . . . . . . . . . . . . . . . . . . . . 6595C-6565. . . . . 97, 99, 102–103,

105–106, 132–135,259, 261–262, 286–

287, 404, 4135C-6602. . . . . . . . . . . . . . . . . . . . . 6595C-8823. . . . . . . . . . . . . . . . . . . . . 6645C-9553. . . . . . . . . . . . . . . . . . . . . 8405E-7937.. . . . . . . . . . . . . . . . . . . . 8375E-7938.. . . . . . . . 829, 833, 8375E-7941.. . . . . . . . 830, 834, 8385F-3106 .. 129, 131, 153–154,

162, 169, 378, 381,495, 520, 522, 696,

705–706, 7095F-3144 .. . .90, 365, 380, 477,

512, 5215F-3926 .. . . . . . . . . . . . . . . . . . . . 3155F-7207 .. . . . . . . . . . . . . . . . . . . . 4495F-8000 .. .89, 213, 348, 352–

353, 458, 461, 476,478, 683–684, 693,

6985G-2247 .. . . 7–11, 33, 35–40,

64, 66–68, 204, 209–210, 216–217, 224–225, 238, 240, 242,273–274, 276–277,302, 310, 323, 325,336–337, 341–343,396–398, 407–409,415, 422–423, 428–429, 434–437, 451–452, 455, 466–469,505, 526, 529, 580,

828, 832, 8365G-5965 .. . . . . . . . . . . . . . . . . . . 2685G-5966 .. . . . . . . . . . . . . . . . . . . 2685G-9660 .. . . . . . . . . . . . . . . . . . . 4465G-9662 .. . . . . . . . . . . . . . . . . . . 4465H-0034 .. . . . . . . . . . . . . . . . . . . 3495H-1504 .. .90, 352, 368, 476,

478, 515, 534, 536,683–684

5H-6734 .. . .53, 232, 383, 4455H-8848 .. .19, 282, 319, 411,

420, 425, 569, 592,602, 641, 647, 653,

660, 671, 8275H-9107 .. . . . . . . . . . . . . . . . . . . 315

5I-6125 .. . . . 6, 239–240, 275,540–542, 715–716

5I-6140 .. . . . . . . . . . . . . . . . . . . . 5415I-6274 . 713, 785–789, 818–

8195I-9336 .. . . . . . . . . . . . . . . . . . . . 7845K-0216. . . 14–15, 44–46, 50,

219, 229, 8215K-0227. . . . . . . . . . . . . . . 798–8005K-0305. . . 329, 430, 442, 6695K-1770. . . . . . . . 320, 421, 427,

674–6755K-2707. . . . . . . . . 313, 417, 5415K-6191. . . .19, 251, 280–282,

316–320, 329–332,348–350, 354, 403,410–411, 419–421,424–425, 427, 430–432, 440–442, 459,462, 641, 647, 653,659–662, 670, 672,

674–6755K-7128. . . . . . . . . . . . . . . . . . . . . 3205K-7129. . . . . . . . . . . . . . . . . . . . . 3205K-7138. . . . . . . . . . . . . . . 321–3225K-7141. . . . . . . . . . . . . . . . . . . . . 3215K-7142. . . . . . . . . . . . . . . . . . . . . 3215K-7143. . . . . . . . . 190, 321–3225K-7144. . . . . . . . . . . . . . . 321–3225K-7247. . . . . . . . . . . . . . . 321–3225K-7305. . . . . . . . . . . . . . . . . . . . . 3225K-7306. . . . . . . . . . . . . . . . . . . . . 3225K-7315. . . . . . . . . . . . . . . . . . . . . 3225K-7316. . . . . . . . . . . . . . . . . . . . . 3225K-8454. . .432–433, 463–4645K-8566. . . . . . . . . . . . . . . 314, 4185K-9107. . 331, 349–350, 431,

443, 460, 473–474,513, 671, 695

5K-9423. . . . . . . . . . . . . . . . . . . . . 3135K-9424. . . . . . . . . . . . . . . . . . . . . 3135K-9457. . . . . . . . . . . . . . . 313, 4175K-9458. . . . . . . . . . . . . . . 313, 4175M-0627... . . . . 332, 354, 432,

462, 6735M-0633... . . . . . . . . . . . . . . . . . 3345M-0634... . . . . . . . . . . . . . . . . . 3345M-0635... . . . . . . . . . . . . . . . . . 3345M-0636... . . . . . . . . . . . . . . . . . 3345M-1245... . . . . . . . . . . . . . . . . . 3785M-1246... . . . . . . . . . . . . . . . . . 3805M-1247... . . . . . . . . . . . . . . . . . 3815M-1667... . . . . . . . . . . . . . . . . . 3895M-1669... . . . . . 380, 390, 5215M-1712... . . . . . . . . . . . 368, 3825M-1732... . . . . . . . . . . . . . . . . . 515

5M-1913.. 330, 348–349, 4595M-1914... . . . . . . . . . . . 331, 4315M-2033... . . . . . . . . . . . 361, 5055M-2035... . . . . . . . . . . . . . . . . . 3755M-2043... . . . 152, 331, 349–

350, 364, 379, 431,443, 460, 473–474,511–512, 520, 671,681, 694–695, 707

5M-2057... . . . . . . . . . . . 812, 8155M-2466... . . . . . . . . . . . . . . . . . 5105M-2894.. 14–15, 17–18, 21,

46, 50, 53, 74, 79,81, 83, 85, 90, 128,206, 211, 219–220,228–229, 232, 281,283, 353, 411–412,420, 424–425, 445,477, 698, 821, 827

5M-3022... . . . . . . . . . . . . . . . . . 3635M-3038... . . . . . . . . . . . 382–3835M-4436.. 353, 461, 684, 6985M-4443...89, 213, 352–353,

461, 476, 478, 683–684, 698

5M-5000... . . . 248–250, 280–281, 316–317, 364,402, 410, 418–419,424, 440–442, 471–472, 492, 509, 659,670, 680, 692–693,

8225M-5003... . . . . . . . . . . . 347, 4585M-5004... . . . . . . . . . . . 347, 4585M-5005... . . . . . 347, 458, 6935M-5009... . . . . . 347, 458, 6935N-4313 ... . . . . . . . . . . . . . . . . . 8265P-0233. . . . . . . . . . . . . . . 387–3885P-0373. . . . . . . . 248–249, 251,

253–254, 402, 404,663

5P-1075. . . . . . . . 259, 261–262,269–270, 286–287,293, 404–406, 413

5P-1076. . .16, 48, 75–77, 96–97, 156–157, 162,170, 177, 187, 200,256–263, 284–287,289, 404, 413, 449,472, 483, 498, 822

5P-1608. . . . . . . . . . . . . . . . . . . . . 6325P-2228. . . 23–24, 54–55, 57,

60–61, 157, 170,177, 187, 200, 207,213–214, 221–222,233–235, 427, 447

5P-2546. . 144, 146, 148–150,160, 167

5P-2566. . 294, 402, 800–801,805–806, 831, 835

5P-3868. .. . . . . . . 188, 190, 6275P-3931. .. . . . . . . 844, 850, 8575P-4028. .. . . . . . . . . . . . . 686–6875P-4130. .. . . . . . . . . . . . . . . . . . . 1605P-4624. .. . . . . . . . . . . . . . . . . . . 4495P-4625. .. . . . . 27–28, 30, 2225P-4683. .. . . . . . . . . . . . . 238, 3965P-4684. .. . . . . . . . . . . . . . . . . . . 2425P-5422. .. . . . . . . . . . . . . 182, 1895P-5855. .. . . . . . . . . . . . . . . . . . . 7055P-6604. .. . . . . . . . . . . . . . . . . . . 1745P-7665. .. . . . . . . . . . . . . 116, 1445P-7971. .. . . . . 57–58, 61, 2355P-8215. .. . . . . . . 811–812, 8145P-8221. .. 178–180, 188, 6275P-8222. .. . . . . . . . . . . . . . . . . . . 1885P-8245. . 131, 153–155, 161,

169, 185, 190, 246,268, 290–291, 401,414, 495, 527, 696,

705, 7885P-8246. .. . . . . . . . . . . . . . . . . . . 2455P-8247. ..14–18, 20–21, 46–

49, 51–53, 57–58,61, 196–197, 199,219–221, 230, 232–233, 235, 252, 282–284, 297, 319, 332,354, 411–412, 421,425–427, 432, 445–446, 462, 480, 531,662, 664, 673–675,

710, 823, 8275P-8248. .. 75–84, 86–89, 91,

229, 231, 233, 351,460, 475, 477, 500,

672, 6825P-8249. .. . . . . . 117–129, 151,

153–154, 162, 166,169, 500, 523, 664,

696, 7095P-8250. .. . . . . . . . . . . . . 182, 7085P-9120. .. . . . . . . 601–602, 7575P-9532. .. . . . . . . . . . . . . . . . . . . 3895P-9681. .. 117, 119, 125, 3075Q-3252 .. . . . . . . . . . . . . . . . . . . 6005Q-3369 .. . . . . . . . . . . . . . . . . . . 5665S-0122. .. . . . . . . . . . . . . . . . . . . 3765S-0160. .. . . . . . . . . . . . . 383–3845S-0161. .. . . . . . . . . . . . . 383–3845S-0162. .. . . . . . . . . . . . . . . . . . . 3835S-0163. .. . . . . . . . . . . . . . . . . . . 383

904

Part Number Index


5S-0709. . 324–327, 342–344,429, 456–457, 506,530, 556, 665–666,

725, 7275S-0710. .. . . . . . 324, 326–327,

342–344, 428, 456–457, 506, 530, 665–

6665S-0726. .. . . . . . . 328, 347, 5085S-0753. . 324, 327, 344, 457,

665–6665S-0754. . 325, 327, 344, 457,

556, 665–666, 725,727

5S-0821. .. . . . . . . . . . . . . . . . . . . 5305S-0822. .. . . . . . . . . . . . . . . . . . . 5305S-0823. .. . . . . . . . . . . . . . . . . . . 5305S-0834. .. . . . . . . 328, 347, 5085S-1532. .. . . . . . . . . . . . . . . . . . . 3895S-4822. .. . . . . . . . . . . . . 328, 5085S-6513. .. . . . . . . . . . . . . . . . . . . 3345S-6910. .. . . . . . . . . . . . . . . . . . . 5355S-6911. .. . . . . . . . . . . . . . . . . . . 5355S-7379. .. . . . . . 259, 261–262,

269–270, 287, 293,404–406, 413

5V-2906... . . . . . . . . . . . . 278, 3145V-3842... . . . . . . . . . . . . . . . . . . 3155V-3875... . . . . . . . . . . . . 320, 4215V-3876... . . . . . . . . . . . . 320, 4215V-4969... . . . . . . . . . . . . . . . . . . 6805W-3915 .. . . . . . 642, 648, 6545W-4040 .. . . . . . 640, 646, 6525W-4142 .. . . . . . 640, 646, 6525W-4146 .. . . . . . 638, 644, 6505W-4147 .. . . . . . 638, 644, 6505W-4148 . 638, 644, 650–6515W-4149 . 638, 644, 650–6515W-4150 .. . . . 638–639, 644–

645, 650–6515W-4151 . 638, 644, 650–6515W-4152 .. . . . 638–639, 644–

645, 650–6515W-4154 .. . . . . . 639, 645, 6515W-4158 .. . . . . . 640, 646, 6525W-4159 .. . . . . . 640, 646, 6525W-4166 .. . . . . . . . . . . . . . . . . . 6445W-4168 .. . . . . . 640, 646, 6525W-7283 .. . . . . . . . . . . . . . . . . . 6385W-9834 .. . . . . . 639, 645, 6515W-9836 .. . . . . . . . . . . . 644, 6505Y-2373 ... . . . . . . 138–139, 1416A-4713 .. . . . . . . . . . . . . . . . . . . 6576A-4725 .. . . . . . . . . . . . . . . . . . . 6596A-7527 .. . . . . . . . . . . . . . . . . . . 658

6B-5278 . 241–243, 398–400,526, 824, 828, 832,

8366B-5502 .. . . . . . 324, 326–327,

342–345, 428, 456–457, 506, 530, 666

6B-5882 .. . . . . . . . . . . . . 361, 5046B-6682 .. . . . . . . . . . . . . . . . . . . 3216B-6863 .. . . . . . . . . . . . . 821–8226C-9149. .. . . . . . . . . . . . . . . . . . . 2126F-7030 ... . . . . . . 152, 520, 7076F-7831 ... . . . . . . . . . . . . 705–7066G-0712 .. . . . . . . 208, 214–2156H-1309 . 189, 196, 389–391,

548, 552, 557, 563,580, 672–673, 682,

696, 7266H-1717 .. . . . . . . 334, 356, 4646H-2953 . 366–368, 493–494,

496, 513–515, 6976H-3977 .. . . . . . . . . . . . . 152, 3906H-6237 .. . . . . . . 382, 522, 7096H-7382 . 206, 230–231, 319,

332, 354, 420, 426,432, 444, 462, 662,

673–6746I-6451 ... . . . . . . . . . . . . . . . . . . 5446I-6477 ... . . . . . . . . . . . . . . . . . . 5446I-6488 ... . . . . . . . . . . . . . . . . . . 8186I-6489 ... . . . . . . . . . . . . . . . . . . 8186I-6525 ... . . . . . . 788–789, 8196I-6528 ... . . . . . . . . . . . . . . . . . . 7896I-6549 ... . . . . . . . . . . . . . . . . . . 5456I-6590 ... . . . . . . . . . . . . . . . . . . 5446I-7076 ... . . . . . . . . . . . . . . . . . . 6326I-7077 ... . . . . . . . . . . . . . . . . . . 6326I-7079 ... . . . . . . . . . . . . . . . . . . 6326I-7081 ... . . . . . . 628, 631–6356I-7083 ... . . . . . . . . . . . . . . . . . . 6326I-7084 ... . . . . . . . . . . . . . . . . . . 6326I-7230 ... . . . . . . . . . . . . . . . . . . 6316I-7508 ... . . . . . . . . . . . . . . . . . . 6356I-7547 ... . . . . . . . . . . . . . . . . . . 6356I-7550 ... . . . . . . . . . . . . . . . . . . 6346I-7553 ... . . . . . . . . . . . . . . . . . . 6346I-7554 ... . . . . . . . . . . . . . . . . . . 6356I-7555 ... . . . . . . . . . . . . . . . . . . 6346I-8060 .. 358, 360, 485, 487,

503–5046I-8061 .. 337, 341, 452, 455,

468–4696I-8077 ... . . . . . . . . . . . . . . . . . . . .436I-8139 ... . . . . . . . . . . . . 103–1046I-8141 ... . . . . . . . . . . . . . . . 94–956I-8142 ... . . . . . . . . . . . . . . . 94–956I-8454 ... . . . . . . . . . . . . . . . . . . 600

6I-8455 .. . . . . . . . . . . . . . . . . . . . 6006I-8648 .. . . . . . . . . . . . . . . . . . . . 6316I-8651 .. . . . . . . . . . . . . . 590, 7456I-8665 .. . . . . . . . . . . . . . . . . . . . 1586I-8691 .. . . . . . . . . . . . . . . . . . . . 1596I-8736 .. . . . . . . . . . . . 94, 96–976I-8737 .. . . . . . . . . . . . 94, 96–976I-8780 .. . . . . . . . 314, 418, 4236I-8839 .. . . . . . . . . . . . . . 141–1426I-9024 .. . . . . . . . . . . . . . . . . . . . . .976I-9029 .. . . . . . . . . . . . . . 104–1056I-9034 .. . . . . . . . . . . . . . . . . . . . 1096I-9036 .. . . . . . . . . . . . . . . . . . . . 1076I-9053 .. . . . . . . . . . . . . . . . . . . . 1066I-9239 .. . . . . . . . . . . . . . 110, 3056I-9240 .. . . . . . . . . . . . . . 110, 3056I-9241 .. . 110, 112, 305, 4876I-9242 .. . 110, 112, 305, 4876I-9243 .. . . . . . . . . . . . . . 110, 3056I-9244 .. . . . . . . . . . . . . . 110, 3056I-9398 .. . . . . . . . . . . . . . . . . . . . 5806I-9399 .. . . . . . . . 580–581, 7476I-9453 .. . . . . . . . 576, 725, 7296I-9454 .. 537, 556, 561, 576,

725, 7296I-9573 .. . . . . . . . . . . . . . . .13, 2776I-9587 .. . . . . . . . . . . . . . . . . . . . 5786I-9597 .. . . . . . . . . . . . . . . . . . . . 5786I-9668 .. . . . . . . . . . . . . . 341–3426I-9671 .. . . . . . . . . . . . . . 341–3426I-9719 .. . . . . . . . . . . . . . . . . . . . 1696I-9854 .. . . . . . . . . . . . . . 589, 7456J-1536.. . . . . . . . . . . . . . . . . . . . 1256J-2515.. . . . . . . . . . . . . . . . . . . . 1846J-4081.. . . . . . . . . . . . . . . . . . . . 2086K-0137. . . . . . . . . . . . . . . 322, 4216K-1261. . . . . . . . . . . . . . . . . . . . . 4586K-1330. . . . . . . . . . . . . . . . . . 75–766K-3631. . . . . . . . . . . . . . . . . . . . . 1656K-3772. . . . . . . . . . . . . . . 121, 1236K-5640. . . . . . . 27–28, 30, 2236K-6444. . . . . . . . . . . . . . . . . . . . . 5236K-7917. . . . . . . . . . . . . . . . . . . . . 1906K-9860. . . .19, 250, 281, 318,

403, 411, 420, 424,660–661, 671, 827,

830, 834, 8386K-9861. . . .19, 250, 281, 318,

403, 410, 419, 424,640, 646, 652, 660,671, 827, 830, 834,

8386K-9880. . .19, 281–282, 318–

319, 410, 419, 424,640, 646, 652, 660,

671, 827

6L-9210 .. . . . . . . . . . . . . . . . . . . . 5346L-9211 .. . . . . . . . . . . . . . . . . . . . 5366L-9965 .. . . . . . . . 389, 391–3926M-2001.. 214, 685, 699–7006M-9613.. . . . . . . 263–264, 4056P-0549. . . . . . . . . . . . . . . . . . . . . 3856P-2083. . . . . . . . . 378, 520, 7066P-2647. . . . . . . . . . . . . . . . . . . . . 3626P-2648. . . . . . . . . . . . . . . . . . . . . 3626P-3068. . . . . . . . . . . . . . . . . . . . . 5066P-3069. . . . . . . . . . . . . . . . . . . . . 5066P-3303. . . . . . . . . . . . . . . . . . . . . 3816P-3307. . . . . . . . . . . . . . . . . . . . . 3816P-3596. . . . . . . . . . . . . . . . . . . . . 3766P-4234. . 324–327, 343–345,

429, 456–457, 506,666

6P-4235. . .339–340, 453–4546P-4236. . 359, 361, 488–489,

5036P-4897. . . . . . . . . . . . . . . . . . . . . 3816P-4898. . . . . . . . . . . . . . . . . . . . . 3816P-6129. . . . . . . . . . . . . . . 677, 6896P-6130. . . . . . . . . . . . . . . 677, 6896P-7614. . . . . . . . . . . . . . . . . . . . . 3706P-7622. . . . . . . . . . . . . . . . . . . . . 3706P-7623. . . . . . . . . . . . . . . . . . . . . 3706P-7625. . . . . . . . . . . . . . . . . . . . . 3706P-7626. . . . . . . . . . . . . . . . . . . . . 3706P-7627. . . . . . . . . . . . . . . . . . . . . 3706P-7691. . . . . . . . . . . . . . . . . . . . . 3846P-7692. . . . . . . . . . . . . . . . . . . . . 3846P-7693. . . . . . . . . . . . . . . . . . . . . 3846P-7694. . . . . . . . . . . . . . . . . . . . . 3846P-8803. . . . . . . . . . . . . . . . . . . . . 3706P-8804. . . . . . . . . . . . . . . . . . . . . 3716P-8806. . . . . . . . . . . . . . . . . . . . . 3716P-8912. . . .79, 81, 83, 85, 90,

126–129, 131, 154,169, 206, 212, 228,

477, 495, 6966P-9107. . . . . . . . . . . . . . . 376–3776S-3142. . . . . . . . . 243–244, 4006S-3143. . . . . . . . . . . . . . . 243, 4006S-3144. . . . . . . . . . . . . . . 243, 4006S-3145. . . . . . . . . . . . . . . 243, 4006S-3146. . 241–243, 398–400,

526, 824, 829, 832,836

6S-3147. . . . . . . . . . . . . . . 243, 4006S-3148. . . . . . . . . . . . . . . 243, 4006S-3149. . . . . . . . . . . . . . . . . . . . . 4016S-3171. . 251–254, 403, 663,

825, 831, 8356S-3172. . 251–254, 663, 825,

831, 835

Part Number Index


905

6S-3178. . .242–243, 399–4006S-3179. . . . . . . . . . . . . . . 243, 4006S-3284. . . . . . . . . 247, 249, 4026S-3285. . . . . . . . . . . . . . . 247, 2496S-3419. . . . . . . . . . . . . . . . . . . . . 4006S-3422. . . . . . . . . . . . . . . 245, 4016S-3429. . . . . . . . . . . . . . . 267–2686S-3451. . . . . . . . . . . . . . . 248, 4026S-3453. . . . . . . . . . . . . . . 248, 4026S-3495. . 247–248, 251–254,

402–403, 663, 825,831, 835

6S-3609. . 250–251, 403, 527,830, 834, 838

6S-3697. . . . . . . . . 248–249, 4026S-6741. . . . . . . . 269–270, 293,

405–4066S-6887. . .241–242, 398–3996S-6888. . .241–242, 398–3996S-6889. . .241–242, 398–3996S-6890. . .241–242, 398–3996S-7038. . 251–254, 403, 663,

825, 830, 8346S-7040. . . . . . . . . 251–254, 4036S-7123. . . . . . . . . . . . . . . 244, 4016S-7124. . . 244, 401, 824, 8376S-7220. . . . . . . . . . . . . . . . . . . . . 4026S-7715. . 247–249, 251–254,

402–403, 663, 825,831, 835

6S-8084. . . . . . . . . . . . . . . 243, 3996S-8085. . . . . . . . . . . . . . . 243, 3996S-8343. . .241–243, 398–3996S-8344. . .241–243, 398–3996S-8814. . . . . . . . . . . . . . . 244, 4016S-8815. . . . . . . . . . . . . . . 244, 4016S-8823. . . 244, 401, 824, 8376S-8824. . . . . . . . . . . . . . . . . . . . . 2446S-9049. . . . . . . . 238, 240, 242,

396–398, 526, 828,832, 836

6S-9051. . . . . . . . . . . . . . . 241, 3986S-9057. . . . . . . . . . . . . . . 244, 4016S-9059. . . . . . . . . . . . . . . . . . . . . 2446S-9102. . . . . . . . . 244–245, 4016S-9115. . . . . . . . . 244–245, 4016S-9627. . . . . . . . . . . . . . . . . . . . . 2676S-9628. . . . . . . . . . . . . . . . . . . . . 2676T-0232 .. . . . . . . . . . . . . . . . . . . . . .136T-0253 .. . . . . . . . . . . . . . . . . . . . . .436T-0511 .. . . . . . . . . . . . . . . . . . . . 6556T-0513 .. . . . . . . . . . . . . . . . . . . . 6586T-0517 .. . . . . . . . . . . . . . . . . . . . 6586T-0720 .. . . . . . . . . . . . . . . .90, 4776T-0729 .. . . . . . . . . . . . . . . . . . . . 4906T-1139 .. . . . . . . . 161, 176, 186

6T-1140 .. 151, 153–154, 162,169

6T-1355 .. . . . . . . . . . . . . . . . . . . . 1286T-1441 .. . . . . . . . . . . . . . . . . . . . 1146T-2162 .. . . . . . . . . . . 64, 68, 1146T-2619 .. . . . . 17–18, 219, 8216T-2620 .. . . . . 17–18, 219, 8216T-2638 .. . . . . . . . . . . . . . 164–1656T-3220 .. . . . . . . . 78, 81, 83, 856T-3284 .. . . . . . . . . . . . . . . .50, 2296T-3285 .. . . . . . . . . . . . . . . .50, 2296T-4504 .. . . . . . . . . . . . . . . . . . . . 1686T-4861 .. . . . . . . . . . . . . . . .90, 4776T-4871 . 79, 81, 83, 85, 126–

128, 131, 154, 169,206, 212, 228, 495,

6966T-4964 .. . . . . . . . . . . . . . 175, 1856T-5114 .. . . . . . . . . . . . . . 131, 4956T-5245 .. . . . . . . . . . . . . . 189, 1966T-5246 .. . . . . . . . 174, 182, 1906T-5247 .. 144, 150, 155, 160,

167, 176, 1856T-5857 .. . . . . . . . . . . . . . . . . . . . 3876T-5858 .. . . . . . . . . . . . . . . . . . . . 3876T-6781 .. . . . . . . . . . . . . . 387–3886T-6782 .. . . . . . . . . . . . . . . . . . . . 5196T-7455 .. . . . . . . . . . . . . . . . . . . . 4586T-7456 .. . . . . . . . . . . . . . . . . . . . 4586T-7500 .. . . . . . . . . . . . . . . . . . . . 1546T-8049 .. . . . . . . . . . . . . . 191, 6316T-8050 .. . . . . . . . . . . . . . 191, 6316T-8435 .. . . . . . . . . . . . . . 628, 6336T-8437 .. . . . . . . . . . . . . . . . . . . . 6356T-8438 .. . . . . . . . . . . . . . 629, 6356T-8520 .. . . . . . . . 191, 193–1946T-8521 .. . . . . . . . 191, 193–1946T-8853 .. . 191–192, 194, 6316V-0387. . . . . . . . . . . . . . . . . . . . . 4916V-0937. . . . . . .43–44, 73, 205,

211, 228, 278, 409–410, 438–439

6V-1366. . . . . . . . . . . . . . . 794, 7966V-1723. . 110, 112, 138–139,

141, 158–159, 305–306, 487

6V-1724. . . . . . . . 138–139, 141,158–159

6V-1725. . 110, 138–139, 141,158–159

6V-1726. . . . . . . . . 161, 172–1736V-1728. . .164–165, 172–1736V-1792. . . .33, 35–37, 41, 64,

66, 68–69, 114, 204–205, 209–210, 224,226, 302, 342, 435–

436, 561, 575, 589,679, 744, 749–750

6V-1793. . . . . . . . . . . . . . . . . . . . . 1146V-1914. . . . . . . . . . . . . . . . . . . . . 4726V-1915. . . . . . . . . . . . . . . 471–4726V-2475. . . . . . . . . 189, 196–1976V-2614. . . . . . . . . . . . . . . 175, 1836V-2615. . . . . . . . . . . . . . . 189, 1976V-2698. . 174–175, 182–183,

1906V-2699. . . 17–18, 21, 50–51,

53, 219–221, 229–230, 232–233, 283–284, 412, 426, 445,

821–8226V-2700. . 145, 150–151, 155,

160–161, 167, 176,186

6V-2701. . . .79, 81, 83, 85, 90,126–129, 131, 154,169–170, 206, 212,228, 477, 495, 696

6V-3213. . . . . . . . . 811–812, 8146V-3303. . . . . . . . . . . . . . . . . . . . . 4456V-3531. . . . . . . . . 208, 212, 2146V-3532. . . . . . . . . . . . . . . . . . . . . 7306V-3669. . . . . . . . . . . . . . . . . . . . . 2076V-4316. . . .13, 219, 278, 296,

299, 3026V-4429. . . . . . . . . 642, 648, 6546V-4791. . . .19, 250, 281, 318,

403, 411, 420, 424,511, 660–661, 671,694, 827, 830, 834,

8386V-5200. . . . . . . . . . . . . . . . . . . . . 7136V-5590. . . . . . . . . . . . . . . 798–8006V-5657. . . . . . . . . . . . . . . . . . . . . 6336V-5686. . . 628, 632, 717, 7226V-5841. . . . . . . . . . . . . . . 116, 1446V-5844. . . . . . . . . . . . . . . 628, 6326V-5845. . . . . . . . . . .90, 213, 4766V-6788. . . . . . . . . . . . . . . 733–7346V-7609. . . . . . . . . 718, 721, 7356V-7644. . . . . . . . . . . . . . . 761, 7696V-7658. . 548, 552, 557, 563,

723, 726, 731, 7346V-7660. . . 545, 718, 721, 7856V-7661. . . . . . . . . . . . . . . . . . . . . 7266V-7675. . . . . . . . . . . . . . . . . . . . . . .166V-8132. . . . . . . . . . . . . . . . . . . . . 6286V-8133. . . . . . . . . . . . . . . . . . . . . 4936V-8149. . . . . . . . . . . . . . . 766, 7746V-8181. . . . . . . . . . . . . . . 105–1076V-8182. . . 501, 664, 675–676

6V-8188... . . . . . 263–264, 267,290–291, 413–414

6V-8197... . . . . . . 252–254, 5276V-8200... . . . . . . . . . . . . . . . . . . 7676V-8201... . . . . . . . . . . . . . . . . . . 7166V-8202... . . . . . . . . . . . . 777, 7876V-8237.. 307, 493, 496, 633,

7376V-8336... . . . . . . . . . . . . . . . . . . 7886V-9167... . . . . 78–83, 85, 2126W-1029 .. . . . . . . . . . . . 685, 7006W-1030 .. . . . . . . . . . . . 685, 7006W-1031 .. . . . . . . . . . . . 685, 7006W-1032 .. . . . . . . . . . . . 685, 7006W-3502 .. . . . . . . . . . . . . . . . . . 6996W-3503 .. . . . . . . . . . . . . . . . . . 6996W-3504 .. . . . . . . . . . . . . . . . . . 6996W-5557 .. . . . . . . . . . . . . . . . . . 7046Y-0216 ... . . . . . . . . . . . . . . . . . . 1896Y-0236 ... . . . . . . . . . . . . . . . . . . 1896Y-0454 ... . . . . . . . . . . . . . . . . . . 3056Y-0469 ... . . . . . . . . . . . . 138, 1416Y-0470 ... . . . . . . . . . . . . 164, 1736Y-0471 ... 178–179, 188, 6276Y-0472 ... 191–192, 194, 6316Y-0473 ... . . 7–11, 14–18, 21,

33, 35–40, 44–46,50–51, 53, 64, 66–68, 74–75, 78–84,86–87, 89–90, 110,112–114, 117–129,131, 138–139, 141,145–151, 153–155,158–160, 162, 164–165, 167–169, 172–173, 175–176, 178–180, 182–184, 186,188–192, 194, 196,198–199, 204, 206–207, 209–210, 212–213, 216–217, 219,221, 224–225, 228–229, 231–232, 238,240, 242, 250, 273–274, 276–277, 280–281, 283, 302, 307,310, 316, 319, 323,325, 332, 336–337,341–344, 352–354,357–358, 360, 366–368, 372–373, 386,396–398, 402, 407–410, 412, 415, 418,420, 422–424, 426–429, 432, 434–437,445–446, 451–452,

906

Part Number Index


455–456, 461–462,466–469, 471–473,476–478, 484–487,491–496, 502–505,514–516, 518, 522,526, 529, 532, 535,580, 599, 608, 616,622, 659, 662, 674,683–684, 696–698,705–706, 709, 756,821–822, 827–828,

832, 8366Y-0553 ... 144, 146, 148–1496Y-0556 .. 144, 146, 149–150,

1606Y-0846 ... . 31–32, 434, 550–

551, 554–556, 559–560, 572–574, 585

6Y-0850 ... . . . . . . 567, 584, 5886Y-0851 ... 567, 576, 584–5886Y-0852 ... . . . . . . . . . . . . . . . . . . 5876Y-0891 ... . . . . . . . . . . . . . . . . . . 1856Y-0892 ... . . . . . . . . . . . . . . . . . . 1856Y-0893 ... . . . . . . . . . . . . . . . . . . 1856Y-0925 . 331, 348, 350, 352–

353, 364–368, 379–380, 382, 431, 443,458, 460–461, 473–474, 478, 496, 509–515, 521–522, 671,680–681, 683–684,692–695, 697–698,

705, 707, 7096Y-0929 ... . . . . . . . . . 39–40, 2256Y-0930 ... . . . . . . . . . . . . . . . . . . . .686Y-0935 . 238, 240–241, 396–

398, 526, 824, 828,832, 836

6Y-0936 . 238, 240–241, 396–398, 526, 824, 828,

832, 8366Y-0937 . 238, 240–241, 396–

397, 824, 828, 832,836

6Y-0938 . 238, 240–241, 396–397, 824, 828, 832,

8366Y-0939 . 238, 240–241, 396–

397, 824, 828, 832,836

6Y-0940 . 238, 240–241, 396–398, 824, 828, 832,

8366Y-1081 ... . . . . . . . . . . . . 138, 1426Y-1082 ... . . . . . . 191, 193–1946Y-1244 ... . . . . . . . . . . . . 246, 402

6Y-1328 ... . . . . . . . . . . . . 244, 4006Y-1329 ... . . . . . . . . . . . . 244, 4006Y-1348 ... . . . . . . . . . . . . . . . . . . 6796Y-1381 ... . . . . . . 244, 400, 5276Y-1382 ... . . . . . . 244, 400, 5276Y-1383 ... . . . . . . . . . . . . 244, 4006Y-1384 ... . . . . . . . . . . . . 244, 4006Y-1385 ... . . . . . . 244, 400, 5276Y-1386 ... . . . . . . 244, 400, 5276Y-1577 ... . . . . . . . . . . . . . . . . . . 1806Y-1578 ... . . . . . . . . . . . . . . . . . . 1806Y-1579 ... . . . . . . 178–179, 1886Y-1589 ... . . . . . . . . . . . . 244, 4016Y-1590 ... . . . . . . . . . . . . 244, 4016Y-1596 .. 244–245, 401, 824,

8376Y-1597 .. 244–245, 401, 824,

8376Y-1607 ... 567, 576, 584–5886Y-1608 ... 567, 576, 584–5886Y-1711 ... . . . . . . 241, 397, 5266Y-1713 ... . . . . . . . . . . . . . . . . . . 5266Y-1717 .. 241, 398, 526, 824,

828, 832, 8366Y-1756 ... . . . . . . . . . . . . 126–1276Y-1757 .. 117–119, 121–124,

126–127, 3076Y-1781 ... . . . . . . . . . . . . . . . . . . 4736Y-1782 ... 580, 592, 747, 7516Y-2040 ... . . . . . . . . . . . . . . . . . . 6686Y-2043 ... . . . . . . . . . . . . 442, 4736Y-2057 ... . . . . . . . . . . . . 178–1806Y-2110 ... . . . . . . . . . . . . 249, 4026Y-2126 ... . . . . . . . . . . . . . . . . . . 5906Y-2141 ... . . . . . . . . . . . . 172–1736Y-2146 ... . . . . . . . . . . . . . . . . . . 1726Y-2147 ... . . . . . . . . . . . . . . . . . . 1726Y-2149 ... . . . . . . . . . . . . . . . . . . 1596Y-2150 ... . . . . . . . . . . . . . . . . . . 1596Y-2266 .. 568–569, 578, 591,

745–746, 7516Y-2270 .. 279, 569, 578, 591,

746, 7516Y-2272 .. 568–569, 578, 591,

745–746, 7516Y-2508 ... . . . . . . . . . . . . . . . . . . 1906Y-2534 ... . . . . . . . . . . . . . . . . . . 1816Y-2536 ... . . . . . . . . . . . . . . . . . . 1816Y-2589 ... . . . . . . 596, 598, 7536Y-2590 ... . . . . . . 596, 598, 7536Y-2592 ... . . . . . . . . . . . . . . . . . . 4846Y-2593 ... . . . . . . . . . . . . 485, 4886Y-2594 ... . . . . . . . . . . . . 485, 4886Y-2748 ... . . . . . . . . . . . . 598, 7536Y-2751 ... . . . . . . 596–598, 7536Y-2792 ... 603–604, 754, 757

6Y-2887 .. . . . . . . . . . . . . . . . . . . . 1726Y-2902 .. . 353, 461, 684, 6986Y-2904 .. . . . . . . . . . . . . . 353, 4616Y-2946 .. . . . . . . . . . . . . . 155, 1766Y-2948 .. . . . . . . . . . . . . . . . . . . . 1766Y-2949 .. . . . . . . . . . . . . . . . . . . . 1766Y-2950 .. . . . . . . . . . . . . . 175–1766Y-2951 .. . . . . . . . . . . . . . . . . . . . 1766Y-2952 .. . . . . . . . . . . . . . . . . . . . 1766Y-2953 .. . . . . . . . . . . . . . . . . . . . 1766Y-3879 .. . . . . . . . . . . . . . . .11, 2176Y-3880 .. . . . . . . . . . . . . . . . . . . . 2266Y-3908 .. . . . . . . . . . . . . . . . . . . . 4426Y-3914 .. . 138–139, 141, 1586Y-3917 .. . . . . . . . . . . . . . . .61, 2356Y-3921 .. . . . . . . . . . . . . . . .61, 2356Y-4006 .. . . . . . . . . . . . . . . . . . . . 1566Y-4124 .. . . . . . . . . . . . . . . . . . . . 1406Y-4744 .. 248–249, 251–254,

402–403, 663, 825,831, 835

6Y-4898 .. . 568, 577, 590, 7456Y-5026 .. . . . . . . . . . . . . . . . . . . . 5076Y-5344 .. . . . . . . . . . . . . . 244, 5276Y-5345 .. . . . . . . . . . . . . . 244, 5276Y-5405 .. . . . . . . . . . . . . . . .39, 2266Y-5406 .. . . . . . . . . . . . . . . . . . . . . .696Y-5412 .. . . . . . . . . . . . . . . . . 38–396Y-5413 .. . . . . . . . . . . . . . 225–2266Y-5414 .. . . . . . . . . . . . . . . . . 38–396Y-5499 .. . . . . . . . . . . . . . 246, 4016Y-5624 .. . . . . . . . . .12, 218, 2776Y-5661 .. . . . . . . . . . . . . . . . . . . . 4236Y-5662 .. . . . . . . . . . . . . . . . . . . . 5906Y-5685 .. . . . . . . . . . . . . . 600, 7536Y-5686 .. . . . . . . . . . . . . . 584–5886Y-5905 .. . . . . . . . . . . . . . . . . . . . 4886Y-5906 .. . . . . . . . . . . . . . . . . . . . 4896Y-6116 .. . . . . . . . . . . . . . . . . . . . 4956Y-6285 .. . . . . . . . . . . . . . . . . . . . . .716Y-6286 .. . . . . . . . . . . . . . . .71, 2116Y-6287 .. . . . . . . . . . . . . . . .71, 2116Y-6289 .. . . . . . . . 346, 470, 5336Y-6290 .. . . . . . . . 346, 470, 5336Y-6291 .. . . . . . . . . .73, 346, 5336Y-6292 .. . . . . 71, 73, 346, 5336Y-6293 .. . . . . . . . . .73, 346, 5336Y-6294 .. . . . 71, 73, 211, 346,

5336Y-6295 .. . . . . . . . . .73, 346, 5336Y-6296 .. . . . 71, 73, 211, 346,

5336Y-6297 .. . . . . . . . . . . . . . . .73, 3466Y-6298 .. . . . . . . . . . . 71, 73, 3466Y-6299 .. . . . . . . . . . . . . . . .73, 3466Y-6300 .. . . . . . . . . . . 72–73, 346

6Y-6380 .. . . . . . . . . . . . . . . . . . . . 2226Y-6381 .. . . . . . . . . . . . . . . . . . . . 2226Y-6382 .. .213–214, 221–2226Y-6383 .. .213–214, 221–2226Y-6389 .. . . . . . . . . . . . . . . . . . . . . .716Y-6390 .. . . . . . . . . . . . . . . . . . . . . .716Y-6391 .. . . . . . . . . . . . . . . . . . . . . .716Y-6392 .. . . . . 71–72, 345, 4706Y-6393 .. . . . . . . . . .72, 345, 4706Y-6394 .. . . . . 71, 73, 345, 5336Y-6395 .. . . . . . . . . .73, 345, 5336Y-6397 .. . . . . 71, 73, 345, 5336Y-6398 .. . . .73, 345, 533, 6796Y-6401 .. . . . . . . . . . . . . . . .73, 3466Y-6402 .. . . . . . . . . . . . . . . . . . . . 3636Y-6404 .. . . . . . . . . . . 71, 73, 3466Y-6405 .. . . . . . . . . .73, 346, 6796Y-6411 .. . . .73, 345, 533, 6796Y-6412 .. . . . . 71, 73, 345, 5336Y-6481 .. . . . . 38–39, 225, 4346Y-6486 .. . . . .9–10, 217, 273–

274, 407–4086Y-6721 .. . . . . . . . . . . . . . . . . . . . 6196Y-6722 .. . . . . . . . . . . . . . . . . . . . 6196Y-6743 .. . 336, 338, 451, 4536Y-6744 .. . 337–338, 451, 4536Y-6745 .. . 337–338, 451, 4536Y-6746 .. . 337–338, 451, 4536Y-6747 .. . 340, 454, 467–4686Y-6748 .. . . . . . . . 340, 454, 4686Y-6749 .. . . . . . . . 340, 454, 4686Y-6750 .. . . . . . . . 340, 454, 4686Y-7432 .. . . . . . . . . . . . . . . . . . . . 6196Y-7433 .. . . . . . . . . . . . . . . . . . . . 6196Y-7453 .. . . . . . . . . . . . . . . . . . . . 6196Y-7592 .. . . . . . . . . . . . . . . . . . . . 6176Y-7599 .. . . . . . . . 617, 620, 6246Y-7602 .. . . . . . . . . . . . . . . . . . . . 6206Y-7603 .. . . . . . . . . . . . . . 617, 6206Y-7610 .. . . . . . . . . . . . . . . . . . . . 6196Y-7652 .. . . . . . . . . . . . . . 380, 5216Y-8023 .. . . . . . . . 601–602, 7566Y-8028 .. . 601–602, 753, 7576Y-8029 .. . 601–602, 753, 7576Y-8075 .. . . . . . . . 569, 591, 6026Y-8077 .. . . . . . . . 569, 591, 6026Y-8134 .. . . . . . . . 601, 611, 6156Y-8171 .. . . . . . . . . . . . . . . . . . . . 6246Y-8172 .. . . . . . . . . . . . . . . . . . . . 6256Y-8176 .. . . . . . . . . . . . . . . . . . . . 6256Y-8177 .. . . . . . . . . . . . . . . . . . . . 6256Y-8180 .. . . . . . . . . . . . . . . . . . . . 6006Y-8185 .. . . . . . . . . . . . . . . . . . . . 6656Y-8186 .. 537, 546, 550–551,

554–556, 559–560,665, 725, 727

Part Number Index


907

6Y-8795 .. . . . . . . . . . . . . . . . . . . . 8206Y-8950 .. . . . . . . . . . . . . . . . . . . . 8246Y-8973 .. . . . . . . . . . . . . . . . . . . . . .726Y-9024 .. . . 62, 465–466, 6146Y-9261 .. . . . . .9–10, 217–218,

273–274, 4076Y-9262 .. . . . . .9–10, 217–218,

273–274, 407–4086Y-9263 .. . . . .9–10, 216, 273–

274, 4076Y-9264 .. . . . .9–10, 216, 273–

274, 4076Y-9267 .. . . . . . . . . . . . . . . .38, 2256Y-9268 .. . . . . . . . . . . . . . . .38, 2256Y-9339 .. . . . . . . . . . . . . . . . . . . . 6256Y-9416 .. . . . . . . . . .42, 228, 4386Y-9474 .. . . . . . . . . . . . . . . . . . . . 2186Y-9855 .. . . . . . . . 569, 591, 6026Y-9856 .. . . . . . . . 569, 591, 6026Y-9858 .. . . . . . . . 569, 591, 6026Y-9925 .. . . . . . . . . . . . . . . . . . . . . .246Y-9926 .. . . . . . . . . . . . . . . . . . . . . .246Y-9932 .. . . . . . . . . . . . . . . . . . . . . .276Y-9933 .. . . . . . . . . . . . . . . . . . . . . .276Y-9934 .. . . . . . . . . . . . . . . .30, 2226Y-9935 .. . . . . . . . . . . . . . . .30, 2236Y-9939 .. . . . . . . . . . . . . . . . . . . . . .286Y-9949 .. . . . . . . . . . . . . . . . . . . . . .286Z-8243.. . . . . . . . . . . . . . . . . . . . 1267B-1115 .. . . . . . . . . . . . . . . . . . . 1967B-1756 .. . . . . . . . . . . . . 321–3227B-3235 .. . . . . . . 333, 354–3557B-7889 .. . . . . . . . . . . . . . . . . . . 3347B-7890 .. . . . . . . . . . . . . . . . . . . 3347B-7891 .. . . . . . . . . . . . . . . . . . . 3347B-7892 .. . . . . . . . . . . . . . . . . . . 3347D-1649 .. . . . . . . . . . 16, 47, 6757D-5238 .. . . . . . . . . . . . . 197–1987D-8508 .. . . . . . . . . . . . . 132–1377D-9749 . 251–254, 404, 663,

825, 831, 8357F-5227 .. . . . . . . . . . . . . . . . . . . . 6727F-6268 .. . . . . . . . . . . . . . . . . . . . 6357F-8267 . 207, 230, 232, 279–

281, 296, 300, 303,316, 319, 329–330,332, 348–350, 354,418, 420, 424, 426,430, 432, 442, 445,459, 462, 659, 662,669, 674, 822, 827

7F-8268 .. 439–441, 640–641,646–647, 652–653,

6617G-0343 ..164–165, 172–1737G-0418 .. . . . . . . 352, 478, 683

7G-1901 ... . . . . . . . . . . . 364, 5097G-1902 ... . . . . . . . . . . . 364, 5097G-2762 ... . . . . . . . . . . . . . . . . . 3917G-2763 ... . . . . . . . . . . . . . . . . . 3917G-3431 ... . . . . . . . . . . . . . . . . . 6277G-4332 . 21, 53, 89–90, 110,

112–114, 131, 138–139, 141, 158–159,164–165, 172–173,178–180, 188, 191–192, 194, 207, 213,221, 231–232, 250,280–281, 283, 305,316, 319, 332, 352–354, 357–358, 360,366–368, 372–373,386, 402, 410, 412,418, 420, 424, 426–427, 432, 445–446,461–462, 471–473,476–478, 484–487,491–496, 502–504,514–516, 518, 522,535, 599, 608, 616,622, 659, 662, 674,683–684, 696–698,709, 756, 822, 827

7G-4355 ... . . . . . . . . . . . 103–1077G-4829 ...21, 221, 283, 412,

4267G-4832 ...20, 220, 283, 412,

4257G-4833 ...20, 220, 283, 412,

4257G-6442 ... . . . . 138–139, 141,

158–1597G-6448 ... . . . . . . . . . . . 142, 1597G-6454 ... . . . . . . . . . . . 142, 1597G-7198 ... . . . . . . . . . . . . . . . . . 1727G-8400 ... . . . . . . . . . . . . . . . . . 3567G-8513 ... . . . . . . . . . . . . . . . . . 3557G-8517 ... . . . . . . . . . . . 354–3557G-8807 ... . . . . . . . . . . . . . . . . . 3917G-8808 ... . . . . . . . . . . . . . . . . . 3917G-8809 ... . . . . . . . . . . . . . . . . . 3827G-8810 ... . . . . . . . . . . . . . . . . . 3827H-2621 ... . . . . . . . . . . . . . . . . . 3897H-2623 ... . . . . . . . . . . . 152, 3907H-3171 . 544, 548, 552, 557,

563, 569, 578, 591–592, 601–602, 611,615, 617, 620, 624–625, 640, 646, 652,746, 751, 754, 757,777, 785–787, 819

7H-3596 ... . . . . . 639, 645, 651

7H-3597 ... . . . . 277, 310–312,323–328, 343–345,415–416, 422–423,428–429, 437, 456–457, 505–506, 529–530, 637–638, 643–644, 649–650, 655–656, 666–667, 820,

8267H-3598 . 357–361, 375, 486,

489, 502–504, 535,688–689

7H-3599 ... . . . . 110, 112–113,305–306, 373–374,484–485, 487–488,518–519, 686–687

7H-3606 ... . . . . . 639, 645, 6517H-3607 . 13, 43–44, 73, 205,

211, 219, 228, 278–279, 295, 328, 347,409–410, 423, 439,458, 470, 508, 531,

5347H-3608 . 116, 144, 160, 347,

363, 490, 507–508,534, 536

7H-3609 . 166, 174, 376–377,519

7H-4566 ... . . . . . . . . . . . 365, 5127H-4571 . 364–365, 443, 473,

511–512, 6947H-4573 ... . . . . . . . . . . . 365, 5127H-4574 . 364–365, 443, 473,

511–512, 6947I-7767 .. . . . . . . . . . . . . . . . . . . . 5697I-9091 .. . . . . . . . . . . . . . . . . . . . 7377J-2036.. . 74–75, 78–85, 87,

117–126, 153, 162,169, 212, 307

7K-1089. . 280, 315–319, 410,418–420, 424, 426,

659, 662, 6747K-1311. . . . . . . . . . . . . . . . . . . . . 4587K-1548. . . . . . . . . . . . . . . 314, 4187K-1825. . . . . . . . . 312, 417, 6577K-1826. . . . . . . . . 312, 417, 6577K-2016. . . . . . . . . 312, 417, 6577K-2017. . . . . . . . 238, 240–243,

312–313, 396–400,417, 526–527, 657,824, 828–829, 832–

833, 836–8377K-2018. . 311–312, 416–417,

637, 643, 649, 655–657, 667, 820, 826

7K-2019. . . . . . . . . . . . . . . 312, 417

7K-2020. . 312, 416–417, 637,643, 649, 655, 667,

820, 8267K-2049. .. . . . . . . . . . . . . . . . . . . 3127K-2051. .. . . . . . . . . . . . . . . . . . . 4167K-2943. .. . . . . . . . . . . . . 320, 4217K-2944. .. . . . . . . . . . . . . 320, 4217K-2961. .. . . . . . . . . . . . . 320, 4217K-2962. .. . . . . . . . . . . . . 320, 4217K-3703. .. . . . . . . . . . . . . 432, 4637K-3704. ..432–433, 463–4647K-3711. .. . . . . . . . . . . . . 432, 4637K-3712. .. . . . . . . . . . . . . 432, 4637K-3713. .. . . . . . . . . . . . . 432, 4647K-3714. .. . . . . . . . . . . . . 433, 4647K-4347. .. . . . . . . . . . . . . . . . . . . 4647K-4438. .. . . . . . . . . . . . . . . . . . . 3227K-4439. .. . . . . . . . . . . . . . . . . . . 4217K-5448. .. 152, 379, 520, 7077K-5449. .. 152, 379, 520, 7077M-1889.. . . . . . . . . . . . . . . . . . . 3717M-1890.. . . . . . . . . . . . . . . . . . . 3717M-3308.. . . . . . . . . . . . . 368, 5157M-3309.. . . . . . . . . . . . . 368, 5157M-5112.. . . . . . . . . . . . . 367, 5147M-8056.. . . . . . . . . . . . . 378–3797P-4695. .. . . . . . . . . . . . . 480–4827P-4699. .. . . . . . . . . . . . . . . . . . . 4827P-5943. .. . . . . . . . . . . . . . . . . . . 5007P-5948. .. . . . . . . . . . . . . . . . . . . 5007P-5952. .. . . . . . . . . . . . . 497, 5007P-6570. .. . . . . . . . . . . . . 479–4807P-6594. .. . . . . . . . . . . . . . . . . . . 4797P-6595. .. . . . . . . . . . . . . . . . . . . 4807P-7208. .. . . . . . . . . . . . . 427, 4477P-7368. .. . . . . . . . . . . . . 448–4497P-7369. .. . . . . . . . . . . . . . . . . . . 4497P-7373. .. . . . . . . . . . . . . . . . . . . 4497P-7430. .. . . . . . . . . . . . . . . . . . . 4827P-7431. .. . . . . . . . . . . . . . . . . . . 4827P-7732. .. . . . . . . . . . . . . . . . . . . 4507P-7911. .. . . . . . . . . . . . . . . . . . . 4427P-7912. .. . . . . . . . . . . . . . . . . . . 4427P-9246. .. . . . . . . . . . . . . . . . . . . 4997P-9250. .. . . . . . . . . . . . . . . . . . . 4997R-0226. . 829–830, 833–834,

837–8387R-0227. . 829–830, 833–834,

837–8387R-0228. . 829–830, 833–834,

837–8397R-0234. .. . . . . . . . . . . . . . . . . . . 8377R-0241. .. . . . . . . . . . . . . 838–8397R-2755. .. . . . . . . . . . . . . . . . . . . 8257R-2756. .. . . . . . . . . . . . . . . . . . . 8257R-2757. .. . . . . . . . . . . . . . . . . . . 824

908

Part Number Index


7R-2758. .. . . . . . . . . . . . . . . . . . . 8247R-8872. .. . . . . . . 182–184, 1997S-0706. .. . . . . . . . . . . . . . . . . . . 5307S-7936. .. . . . . . . . . . . . . . . . . . . 3817S-7975. .. . . . . . . . . . . . . . . . . . . 3937S-8011. .. . . . . . . . . . . . . . . . . . . 3937S-8012. .. . . . . . . . . . . . . . . . . . . 3937S-8013. .. . . . . . . . . . . . . . . . . . . 3937S-8213. .. . . . . . . . . . . . . . . . . . . 3357S-8214. .. . . . . . . . . . . . . . . . . . . 3357S-9093. .. . . . . . . . . . . . . . . . . . . 5197S-9096. .. . . . . . . . . . . . . . . . . . . 5197S-9181. .. . . . . . . 373–374, 5187S-9182. ..373–374, 518–5197S-9567. .. . . . . . . . . . . . . . . . . . . 5307S-9601. .. . . . . . . 373–374, 5187S-9602. .. . . . . . . 373–374, 5187S-9603. .. . . . . . . 373–374, 5187S-9604. .. . . . . . . 373–374, 5187T-0157 ... . . . . . . 174, 182, 1907T-0158 ... .79, 81, 83, 85, 90,

126–129, 131, 154,169, 206, 212, 228,

477, 495, 6967T-0159 .. 144, 150, 155, 160,

167, 176, 1857T-0160 ... . . . . . . . . . . . . 189, 1967T-0715 ... . . . . . . . . . . . . . . . . . . 1787T-0716 ... . . . . . . . . . . . . . . . . . . 1787T-0724 ... . . . . . . . . . . . . . . . . . . 1817T-0961 ... . . . . . . . . . . . . . . . . . . 1827T-1000 ... . . . . . . . . . . . . 178–1807T-1093 .. 145, 151, 155, 161,

167, 176, 1867T-1094 ... .79, 81, 84, 86, 91,

127–129, 131, 154,170, 212, 229, 477,

496, 6967T-1158 ... . . . . . . . . . . . . . . . . . . 1907T-1243 ... . . . . . . . . . . . . 195–1967T-1248 ... . . . . . . . . . . . . . . . . . . 1667T-1310 ... . . . . . . . . . . . . . . . . . . 7047T-1312 ... . . . . . . . . . . . . 362, 5067T-1313 ... . . . . . . . . . . . . 362, 5067T-1315 ... . . . . . . . . . . . . . . . . . . 4247T-1825 ... . . . . . . . . . . . . . . . . . . 1907T-1826 ... . . . . . . . . . . . . . . . . . . 1907T-2275 ... . . . . . . . . . . . . . . . . . . 1647T-2276 ... . . . . . . . . . . . . . . . . . . 1647T-2283 ...164–165, 172–1737T-2288 ... . . . . . . . . . . . . . . . . . . 1667T-2294 ... . . . . . . . . . . . . . . . . . . 1667T-2310 ... . . . . . . . . . . . . . . . . . . 1607T-2390 ... . . . . . . . . . . . . 142, 1597T-2392 ... . . . . . . . . . . . . 142, 1597T-2394 ... . . . . . . . . . . . . 142, 159

7T-2770 ... . . . . . . . . . . . . . . . . . . 1677T-3501 . 329, 430, 439, 441–

4427T-4030 ... .17–18, 21, 50, 53,

219–220, 229, 232,283, 412, 426, 445,

8217T-4031 ... . . . . . . . . . . . . . .90, 4777T-4043 ... . . . . . . . . . . . . . . . . . . 6657T-4044 ... . . . . . . . . . . . . . . . . . . 6657T-4080 ... .17–18, 21, 50, 53,

219–220, 229, 232,283, 412, 426, 445,

8217T-4086 ... .17–18, 21, 51, 53,

219, 221, 230, 233,284, 412, 426, 822

7T-4087 ... .17–18, 21, 51, 53,220–221, 230, 233,284, 412, 426, 822

7T-4101 ... . . . . . . . . . . . . . .90, 4777T-4106 ... . . . . . . . . . . . . . .90, 4777T-4137 ... . . . . . . . . . . . . . . . . . . 1727T-4138 ... . . . . . . . . . . . . . . . . . . 1737T-4152 ... . . . . . . . . . . . . . .90, 4777T-4173 ... . . . . . . . . . . . . . . . . . . 4227T-4174 ... . . . . . . . . . . . . . . . . . . 4227T-4175 ... . . . . . . . . . . . . . . . . . . 4227T-4176 ... . . . . . . . . . . . . . . . . . . 4227T-4177 ... . . . . . . . . . . . . . . . . . . 4227T-4178 ... . . . . . . . . . . . . . . . . . . 4227T-4509 ... . . . . . . . . . . . . . . . . . . 3647T-4539 ... 325, 429, 436, 5297T-4540 . 325, 429, 436, 529–

5307T-4541 ... . . . . . . 325, 429, 4367T-4542 ... . . . . . . 325, 429, 4367T-4543 ... . . . . . . 325, 429, 4367T-4544 ... . . . . . . 325, 429, 4367T-4562 .. 347, 458, 471–472,

5347T-4607 ... . . . . . . . . . . . . . . . . . . 1817T-4628 . 276, 310, 415, 422–

4237T-4636 .. 323, 325, 342–343,

428–429, 437, 455,505, 529

7T-4645 ... 340, 454, 468, 5327T-4646 ... 340, 455, 468, 5327T-4657 ... . . . . . . 360, 486, 5047T-4658 ... . . . . . . 360, 486, 5047T-4659 ... . . . . . . 360, 486, 5047T-4660 ... . . . . . . 360, 486, 5047T-4661 ... . . . . . . 360, 486, 5047T-4662 ... . . . . . . 360, 486, 5047T-4700 ... . . . . . . . . . . . . . . . . . . 157

7T-4722 .. . .79, 81, 83, 86, 91,212, 229, 477, 496

7T-5125 .. 145, 151, 155, 161,167, 176, 186

7T-5133 .. 127–129, 131, 154,170, 696

7T-5419 .. . . . . . . . . . . . . . . . . . . . 1707T-5510 .. . . . . . . . . . . . . . 157, 1627T-5959 .. . . . . . . . . . . . . . 177, 1877T-5969 .. . . . . . . . . . . . . . . . . . . . 4907T-7054 .. . . . . . . . . . . . . . 138, 1417T-7629 .. . . . . . . . . . . . . . . . . . . . 1727T-7630 .. . . . . . . . . . . . . . . . . . . . 1727T-9264 .. . . . . . . . . . . . . . . . . . . . 7057T-9307 .. . . . . . . . 157, 163, 1707T-9309 .. . . . . . . . . . . . . . 177, 1877T-9311 .. . . . . . . . . . . . . . 190, 2007T-9754 .. . . . . . . . . . . . . . 794, 7967T-9755 .. . . . . . . . . . . . . . 794, 7967T-9823 .. . . . . . . . . . . . . . . . . . . . 6867T-9824 .. . . . . . . . . . . . . . . . . . . . 6867T-9825 .. 113, 484–485, 488,

686–6877V-0753.. . . . . . . . . . . . . . . . . . . . 7047V-0820.. . . . . . . . . . . . . . . . . . . . 7107V-0821.. . . . . . . . . . . . . . . . . . . . 7107V-0896.. . . . . . . . . . . . . . . . . . . . 7097V-0897.. . . . . . . . . . . . . . . . . . . . 7107V-3687.. . . . . . . . . . . . . . 322, 4217X-0288. . . . . . . . . 259, 261, 4047X-0307. . . . . . . . . . . . . . . . . . . . . 1577X-0310. . . . . . . . . . . . . . . 492, 8227X-0311. . . . . . . . . 440–442, 6707X-0313. . . . . . . . . 680, 692–6937X-0318. . . . . . . . . 471–472, 6597X-0325. . . . . . . . . . . . . . . . . . . . . 8237X-0343. . . 131–132, 449, 4827X-0344. . . . . . . . . . . . . . . 186, 4827X-0345. . . . . . . . . 156, 170, 2007X-0346. . . . . . . . . . . . . . . . . . . . . 4827X-0347. . . . . . 56–61, 235, 4827X-0349. . . . . . . . . 250, 821–8227X-0350. . . . . . . . . . . . . . . . . . . . . 2007X-0351. . . 259, 261–262, 4047X-0353. . . . . . . . . 286–287, 4137X-0357. . . . . . . . . . . . . . . . . . . . . . .487X-0366. . . . . . . . . 664, 675–6767X-0368. . . . . . . . . . . . . . . . . . . . . 4997X-0380. . . . . . . . . . . . . . . 499, 5017X-0382. . . . . . . . . . . . . . . . . . . . . 5017X-0383. . . . . . . . . 132–137, 1567X-0384. . . . . . . . . . . . . . . . . . . . . 5017X-0385. . . . . . . . . . . . . . . . . . . . . 4997X-0386. . . . . . . . . 176–177, 1877X-0393. . . . . . . . . . . . . . . . . . . . . 1687X-0403. . . . . . . . . . . . . . . 685, 699

7X-0407. . . . . . . . . . . . . . . . . . . . . 7107X-0434. . . . . . . . . . . . . . . . . . . . . 1987X-0444. . . . . . . . . . . . . . . 175, 1857X-0448. . . . . . . . . . . . . . . 250, 4827X-0471. . . . . . . . . . . . . . . . . . . . . 2677X-0488. . . . . . . . . . . . . . . . . . . . . 4497X-0510. . . . . . . . . . . . . . . 775–7767X-0513. . . . . . . . . . . . . . . . . . . . . 6997X-0515. . 480–481, 769–770,

776–777, 8207X-0529. . . . . . . . . 685, 699–7007X-0531. . . . . . . . . . . . . . . . . . . . . 1507X-0533. . . . . . . . . . . . . . . . . . . . . 1987X-0550. . . . . 24–27, 262–263,

2897X-0563. . . . . . . . 424, 440–442,

471–472, 492, 659,670, 680, 692–693

7X-0578. . . . . . . . . . . . . . . . . . . . . 7717X-0583. . . . . . . . . . . . . . . . . . . . . 2507X-0584. . . 271, 292, 294, 4027X-0590. . . . . . . . . . . . . . . 132–1357X-0612. . . . . . . . . . . . . . . . . . . . . 1897X-0618. . 248–250, 280–281,

402, 4107X-0622. . . . . . . . . . . . . . . . . . . . . 7147X-2440. . . . . . . . 570–571, 583,

593–5957X-2454. . . 603–605, 754, 7587X-2475. . . . . . . . . . . . . . . . . . . . . 4477X-2553. . 289, 307, 309, 479,

481–482, 545, 7707X-2554. . . . . . . . . . . . . . . . . . . . . 4417X-2555. . . . . . . . . . . . . . . 545, 7187X-2556. . . . . . . . . 256–260, 7777X-2557. . . . . . . . . . . . . . . . . . . . . 6317X-2559. . . . . . . . . . . . . . . . . . . . . 4487X-2562. . 497–498, 547, 557,

562–563, 5777X-2563. . 480–482, 500, 570,

581, 5937X-2564. . . . . . . . . . . . . . . 498, 7267X-2565. . . . . . . . 548, 552, 558,

564–565, 570, 579–581, 592–593, 746–

748, 751–7527X-2575. . . . . . . . 600, 607, 610,

613–615, 751, 753,756

7X-2576. . 499, 612–613, 752,755, 758

7X-2577. . . . . . . . . . . . . . . . . . . . . 6027X-2584. . . 615, 618, 620, 6257X-3328. . . . . . . . . . . . . . . . .30, 2227X-3335. . . . . . . . . . . . . . . 265–2667X-3392. . . . . . . . . . . . . . . . . . . . . 792

Part Number Index


909

7X-4778. . . . . . . . . . . . . . . . . . . . . 6347X-7248. . . . . . . . . . . . . . . . . . . . . 8267X-7729. . . . . . . . . . . . . . . 271, 2927X-9835. . . . . . . . . . . . . . . . . . . . . 8247Y-0336 .. . . . . . . . . . . . . . 612–6137Y-1248 .. . . . . . . . . . . . . . 601, 7577Y-1810 .. . . . . . . . . . . . . . . . . . . . 6197Y-1871 .. . . . . . . . . . . . . . . . . . . . 6157Y-2581 .. . . . . . . . . . . . . . 570, 5937Y-2914 .. . . . . . . . . . . . . . . . . . . . 6217Y-5227 .. . . . . . . . . . . . . . . . . . . . . .497Y-5232 .. .620–621, 629–6307Y-5233 .. . . . . . . . . 98–103, 1087Y-5267 .. . . . . . . . . . . . . . . . . . . . 7627Y-8973 .. . . . . . . . . . . . . . . . . . . . 6207Z-8877.. . . . . . . . . . . . . . . . . . . . 6688C-1149. . . . . . . . . . . . . . . . . . . . . 8268C-3425. . . . . . . . . . . . . . . 711, 7848C-3435. . . . . . . . . . . . . . . . . . . . . 1898C-4436. . . .99, 102–107, 156,

7958C-6857. . . . 99, 101–109, 1708C-6877. . 122, 124, 146–147,

168, 248–250, 280–281, 402, 410, 424

8C-6913. . . . . . . . 132–137, 168,176–177, 187, 499,

5018C-8478. . . . . . . . . . . . . . . 480–4818C-8723. . . . . . . . . 618, 625–6268E-0281.. . . . . . . . . .53, 233, 4468E-0301.. . . . . . . . . . . . . . . . . . . . 2338E-0398.. . . . . . . . . . . . . . . . . . . . 1528E-0399.. . . . . . . . . . . . . . . . . . . . 1528E-0400.. . . . . . . . . . . . . . . . . . . . 1528E-0645.. 640–641, 646–647,

652–653, 6618E-0830.. . . . . . . . . . . . . . . . . . . . 7088E-0831.. . . . . . . . . . . . . . . . . . . . 7088E-0855.. 339–340, 453–454,

533, 677–678, 6898E-0885.. . . . . . . . . . . . . . . .38, 2258E-0886.. . . . . . . . . . . . . . . .38, 2258E-0887.. . . . . . . . . . . . . . . .38, 2258E-0888.. . . . . . . . . . . . . . . .38, 2258E-1886.. . . . . . . . . . . . . . 619, 6238E-1887.. . . . . . . . . . . . . . 619, 6238E-2355.. . . . . . . . . . . . . . . .68, 6798E-2356.. . . . . . . . . . . . . . . .68, 6798E-2357.. . . . . . . . . . . . . . . . . . . . . .688E-2358.. . . . . . . . . . . . . . . . . . . . . .688E-2359.. . . . . . . . . . . . . . . . . . . . . .688E-2360.. . . . . . . . . . . . . . . . . . . . . .688E-3332.. . 639, 645, 651, 6588E-3333.. . . . . . . . 639, 645, 6518E-3334.. . . . . . . . 639, 645, 651

8E-3335.. . . . . . . . 645, 651, 6588E-4007.. .205–206, 228–2298E-4008.. . . . . . . . . . . . . . 205, 2288E-4015.. . . . . . . . . . . . . . . . . . . . 2298E-4017.. . . . . . . . . . . . . . 205, 2288E-4023.. . . . . . . . . . . . . . . . . . . . 2298E-4055.. . . . . . . . 386–387, 7028E-4056.. . . . . . . . 386–387, 7028E-4057.. . . . . . . . . . . . . . . . . . . . 3868E-4058.. . . . . . . . . . . . . . . . . . . . 3868E-4059.. . . . . . . . . . . . . . 139, 1588E-4060.. . . . . . . . . . . . . . 139, 1588E-4061.. . . . . . . . . . . . . . 138, 1418E-4062.. . . . . . . . . . . . . . 138, 1418E-4160.. . . . . . . . . . . . . . . . . 38–398E-4272. 358–359, 361, 488–

489, 503, 599, 608–609, 686, 688–689,

7568E-4273.. . 488, 686, 688–6898E-4275.. . . . . . . . . . . . . . . . . . . . 6888E-4326.. . . . . . . . . . . . . . . . . . . . . .688E-4327.. . . . . . . . . . . . . . . . . . . . . .688E-4328.. . . . . . . . . . . . . . . . . . . . . .688E-4335.. . . . . . . . . . . . . . . . . . . . 6158E-4343.. . . . . . . . . . . . . . . . . . . . 6158E-4359.. 548, 551, 557, 563,

7268E-4416.. . . . . . . . . . . . . . 116, 4898E-4417.. . . . . . . . . . . . . . 116, 4898E-4418.. . . . . . . . . . . . . . . . . . . . 4898E-4419.. . . . . . . . . . . . . . . . . . . . 4898E-4424.. . . . . . . . . . . . . . 363, 5078E-4427.. . . . . . . . 116, 489, 6908E-4432.. . . . . . . . . . . . . . 362, 4908E-4433.. . . . . . . . . . . . . . 362, 4908E-4434.. 362, 490, 506, 535,

6908E-4435.. . 362, 490, 506, 5358E-4436.. . 362, 490, 506, 5368E-4437.. . 362, 490, 506, 5368E-4457.. . 138–139, 141, 1588E-4458.. . 138–139, 141, 1588E-4494.. . . . . . . . . . . . . . 346, 4708E-4495.. . . . . . . . . . . . . . 346, 4708E-4496.. . . .73, 346, 470, 6798E-4497.. . . . . 72–73, 346, 4708E-4498.. . . . . . . . . . . . . . . . . . . . . .728E-4499.. . . . . . . . 346, 470, 5348E-4500.. . . . . . . . 346, 470, 5348E-4501.. . . . . . . . 346, 457, 5338E-4502.. . 346, 457, 470, 5338E-4505.. . . . . . . . . . . . . . 139, 1588E-4506.. . . . . . . . . . . . . . 139, 1588E-4513.. . . . . . . . . . . . . . 138, 1418E-4514.. . . . . . . . . . . . . . 138, 141

8E-4573.. . . . . . . . . . . . . . . . . . . . 6728E-4574.. . . . . . . . . . . . . . . . . . . . 6728E-4576.. . . . . . . . . . . . . . . . . . . . 6818E-4577.. . . . . . . . . . . . . . . . . . . . 6818E-4579.. . . . . . . . . . . . . . . . . . . . 6958E-4580.. . . . . . . . . . . . . . . . . . . . 6958E-4623.. . . . . . . . . . . . . . . . . . . . 6158E-4686.. . . . . . . . . . . . . . . . . . . . 6198E-4713.. . . . . . . . . . . . . . 677, 6898E-4714.. . . . . . . . . . . . . . . . . . . . 6898E-4722.. . . . . . . . 328, 346, 4388E-4723.. . . . . . . . 328, 346, 4388E-4724.. 328, 430, 438, 457,

5078E-4725.. 328, 346, 430, 438,

457, 507, 5308E-4799.. . . . . . . . 278, 314, 4238E-4800.. . . . . . . . 278, 314, 4238E-4805.. . . . . . . . 314, 418, 4238E-4807.. . . . . . . . 314, 418, 4238E-4808.. . . . . . . . 314, 418, 4238E-4972.. . . . . . . . . . . . . . . . . . . . . .138E-4974.. . . . . . . . . . . . . . . . . . . . . .438E-5037.. . . . . . . . . . . . . . . . . . . . 7268E-5257.. 337, 341, 452, 455,

4688E-5258.. . 360, 485–486, 5048E-5281.. . . . . . . . . . . . . . . . . . . . 4378E-5456.. . . . . . . . . . . . . . . . . . . . 6968E-5467.. . . . . . . . . . . . . . . . . . . . 6728E-5468.. . . . . . . . . . . . . . . . . . . . 6728E-5599.. . . . . . . . . . . . . . . . . . . . 7268E-5600.. 538, 548, 552, 557,

563, 579, 7268E-5601.. . . . . . . . . . . . . . . . . . . . 7268E-5745.. . . . . . . . . . . . . . . . . . . . 6728E-6089.. . . . . . . . . . . . . . . . . . . . 6148E-6090.. . . . . . . . . . . . . . . . . . . . 6148E-6091.. . . . . . . . . . . . . . . . . . . . 6148E-6092.. . . . . . . . . . . . . . . . . . . . 6148E-6094.. . . . . . . . . . . . . . . . . . . . 6148E-6095.. . . . . . . . . . . . . . . . . . . . 6148E-6096.. . . . . . . . . . . . . . . . . . . . 6148E-6097.. . . . . . . . . . . . . . . . . . . . 6148E-6098.. . . . . . . . . . . . . . . . . . . . 6148E-6099.. . . . . . . . . . . . . . . . . . . . 6148E-6114.. . . . . . . . . . . . . . . . . . . . . .728E-6135.. . . . . . . . . . . . . . 680, 6928E-6573.. . .21, 220, 283, 412,

4258E-6619. 117–128, 144, 146–

150, 155, 160, 167–168, 176, 185, 307

8E-6643.. . . . . . . . . . . . . . . . . . . . 1698E-6644.. . . . . . . . . . . . . . 190, 1998E-6653.. . . . . . . . . . . . . . . . . . . . 190

8E-6661... . . . . . . . . . . . . . . . . . . 1768E-6974... . . . . . . . . . . . . . . . . . . 6148E-6977... . . . . . . . . . . . . . . . . . . 4708E-6978... . . . . . . . . . . . . . . . . . . 4708E-7222... .64, 209, 341, 575,

588–589, 7498E-7232... . . . . . . . . . . . . . . . . . . 6928E-7342... . . . . . . 249–250, 4028E-7343... . . . . . . . . . . . . 249, 4028E-7405... . . . . . . . . . . . . . .69, 3418E-7406... . . . . . . . . . . . . . .69, 3418E-7407... . . .64, 66, 69, 209–

210, 341, 7498E-7408... . . .64, 66, 69, 209–

210, 341, 7498E-7409... . . 64, 69, 209–210,

341, 7498E-7410... . . 64, 69, 209–210,

341, 7498E-7494... 641, 647, 653, 6618E-7496... 641, 647, 653, 6618E-7510.. 128, 131, 153–154,

161, 169, 495, 522,696, 705, 709

8E-7699... . . . . . . . . . . . . . . . . . . 1408E-7700... . . . . . . . . . . . . . . . . . . 1408E-7857... . . . . . . . . . . . . . . . . . . 7028E-7899.. 280, 315, 410, 418,

4248E-8323... . . . . . . . . . . . . 116, 4898E-8324... 116, 362, 489–4908E-8325... . . . . . . . . . . . . 362, 4908E-8326... . . . . . . . . . . . . 362, 4908E-8522... . . . . . . . . . . . . . . . . . . 2288E-8523... . . . . . . . . . . . . . . . . . . 2288E-8526... . . . . . . . . . . . . . .13, 2188E-8527... . . . . . . . . . . . . . .13, 2188E-8585. 537, 546, 550, 554–

556, 559, 725, 7278E-8586. 537, 546, 550, 554–

556, 559, 725, 7278E-8643... . . . . . . . . . . . . . . . . . . 6868E-8644... . . . . . . . . . . . . . . . . . . 6868E-8648.. 117–118, 121–122,

126–127, 1298E-8783... . . . . . . . . . . . . . . . . . . . .588E-8812... . . . . . . . . . . . . 577, 5908E-8814... . . . . . . . . . . . . 577, 5908E-8835.. 547, 562, 576, 725,

7298E-8907... . . . . . . 659, 670, 8228E-9396... . . . . . . . . . . . . . . . . . . 1438E-9399... . . . . . . . . . . . . 115, 1438E-9562... . . . . . . . . . . . . . . . . . . 4928E-9763... . . . . . . . . . . . . . .60, 2358E-9766... . . . . . . . . . . . . . . . . . . . .24

910

Part Number Index


8E-9767... . . . . . . . . . . . . . . . . . . . .248E-9799... . . . . . . 115, 142, 1608E-9805.. 537, 547, 557, 562,

577, 6698E-9810... . . . . . . . . . . . . . . . . . . . .138E-9812... . . . . . . . . . . . . . .13, 2778E-9814... . . . . . . . . . . . . . . . . . . . .128E-9816... . . . . . . . . . . . . . .12, 2778E-9820... . . . . . . . . . . . . . . . 38–398E-9821... . . . . . . . . . . . . . . . . . . . .438E-9823... . . . . . . . . . . . . . . . . . . . .438E-9825... . . . . . . . . . . . . . . . . . . . .428E-9827... . . . . . . . . . . . . . . . . . . . .428E-9922... . . . . . . . . . . . . . . . . . . . .978E-9923... . . . . . . . . . . . . . . . . . . . .978E-9928... . . . . . . . . . . . . 104–1058E-9932... . . . . . . . . . . . . . 98–1068F-0737 ... . . . . . . . . . . . . 152, 3898F-1190 ... . . . . . . . . . . . . . . . . . . 5228F-6711 .. 364, 366–368, 383,

493–494, 496, 509–510, 514–515, 522,579–581, 592, 680,693, 696, 709, 747–

748, 7528F-8733 .. 174, 182–184, 190,

1998F-8882 . 569, 578, 591, 603–

604, 697, 705–706,746, 751, 754, 757

8F-9516 .. 145–150, 155, 160,167–168, 176, 186

8G-0980 .. . . . . . . . . . . . . . . . . . . 4998G-1450 .. . . . . . . . . . . . . 471–4728G-2049 .. . . . . . . . . . . . . . . . . . . 5018G-3170 .. . . . . . . . . . . . . . . . . . . 4248G-3172 .. . . . . . . . . . . . . . . . . . . 4248G-3351 .. . . . . . . . . . . . . . . . . . . 4998G-4077 .. . . . . . . . . . . . . . . . . . . 4498G-5258 .. 25, 56–58, 60–61,

2358G-5335 .. . . . . . . . . . . . . . .60, 2358G-6044 .. . . . . . . . . . . . . . . . . . . 5018G-6045 .. . . . . . . . . . . . . . . . . . . 5018G-6048 .. . . . . . . . . . . . . 499, 5018G-6781 .. . . . . . . . . . . . . . . . . . . 4278G-6792 .. . . . . . . . . . . . . . . . . . . 4278G-6793 .. . . . . . . . . . . . . . . . . . . 4278G-6921 .. . . . . . . . . . . . . . . . . . . 4478G-6926 .. . . . . . . . . . . . . . . . . . . 4478G-6927 .. . . . . . . . . . . . . . . . . . . 4478G-7148 .. . . . . . . . . . . . . . . . . . . 4828G-7149 .. . . . . . . . . . . . . . . . . . . 4828G-7150 .. . . . . . . . . . . . . . . . . . . 4828G-7575 .. . . . . . . . . . . . . . . . . . . 4808G-7576 .. . . . . . . . . . . . . . . . . . . 482

8G-8031 .. . . . . . . . . . . . . 499–5008G-8047 .. . . . . . . . . . . . . . . . . . . 5018G-8050 .. . . . . . . . . . . . . . . . . . . 5018G-9530 .. . . . . . . . . . . . . . . . 78–878G-9824 .. . . . . . . . . . . . . . . . . . . 1078H-1383 .. . . . . . . . . . . . . 134–1358H-2262 . 174, 182, 190, 331,

348, 350, 352–353,364–368, 379–380,383, 431, 443, 458,460–461, 471–474,478, 492, 496, 509–515, 521–522, 671,680–681, 683–684,692–695, 697–698,

705, 707, 7098H-2265 . 152, 250, 378, 381,

390, 402, 520, 640–641, 646–647, 652–653, 661, 706, 726

8H-5376 .. . . . . . . . . . . . . . . . . . . 3828H-5377 .. . . . . . . . . . . . . . . . . . . 3828H-5380 .. . . . . . . . . . . . . . . . . . . 3828H-5381 .. . . . . . . . . . . . . . . . . . . 3828H-5411 .. . . . . . . . . . . . . . . . . . . 5128H-5412 .. . . . . . . . . . . . . . . . . . . 5128H-5724 . 245–246, 314, 401,

5278H-6392 .. . . . . . . . . . . . . . . . . . . 5218H-6393 .. . . . . . . . . . . . . . . . . . . 5218H-7504 .. . . . . . . 244, 314, 4008H-9789 .. 797, 803, 805, 8088J-7636... . . . . . . . . . . . . 802, 8078K-0321. .. . . . . . . . . . . . . . . . . . . 6708K-0323. .. . . . . . . . . . . . . . . . . . . 6678K-0589. .. . . . . . . . . . . . . . . . . . . 2138K-1390. .. . . . . . . . . . . . . . . . . . . 7048K-1392. .. . . . . . . . . . . . . . . . . . . 7048K-2271. .. . . . . . . . . . . . . . . . . . . 6688K-4054. .. . . . . . . . . . . . . . . . . . . 7048K-4438. .. . . . . . . . . . . . . . . . . . . 6758K-4444. .. . . . . . . . . . . . . . . . . . . 6758K-4699. .. . . . . . . . . . . . . . . . . . . 6678K-4753. .. . . . . . . . . . . . . . . . . . . 7028K-8305. .. . . . . . . . . . . . . . . . . . . 6688L-5560 ... . . . . . . 243, 399–4008M-0341.. . . . . . . . . . . . . 364, 5098M-0342.. . . . . . . . . . . . . 364, 5098M-0343.. . . . . . . 364, 509–5108M-0344.. . . . . . . . . . . . . 364, 5108M-0383.. . . . . . . . . . . . . . . . . . . 5218M-2619.. . . . . . . 372, 374, 5198M-2620.. . . . . . 372, 374, 519,

614, 7028M-2621.. . . . . . . . . . . . . 614, 702

8M-4390.. . . . . . 364, 367–369,494–495, 497, 509–511, 514–516, 522,

5938M-4395.. . . . . . . 471, 672–6738M-4436.. . . . . . 348, 352–353,

459, 462, 4798M-5661.. . . . . . 320, 329–332,

348–349, 354, 421,427, 430, 432, 440–442, 459, 463, 674–

6758M-6041.. . . . . . . . . . . . . . . . . . . 3288M-6238.. . . . . . 488–489, 609,

686, 688–6898M-6239.. . . . . . 358–359, 361,

488–489, 503, 609,686, 688–689

8M-6910.. . . . . . . . . . . . . . . . . . . 6198M-7229.. . . . . . . . . . . . . . . . . . . 3758M-7230.. . . . . . . . . . . . . . . . . . . 3758M-7231.. . . . . . 338–340, 361,

375, 452–454, 505,533, 677–678, 689,

7328M-7232.. . . . . . . . . . . . . . . . . . . 3758M-7288.. . . . . . . . . . . . . 361, 5048M-7289.. . . . . . . . . . . . . 361, 5048M-7290.. . . . . . 339–340, 361,

453–454, 505, 533,677–678, 689

8M-7454.. . . . . . . . . . . . . 327, 3458M-7455.. . . . . . . . . . . . . 327, 3458M-7456.. . . . . 324, 327, 344–

345, 457, 6668M-7457.. . . . . . . . . . . . . 327, 3458P-0021. . 144, 150, 155, 160,

167, 176, 1868P-0622. . . . . . . . . . . . . . . . . . . . . 5078P-1473. . . . . . . . . . . . . . . . . . . . . 5198P-1851. . . . . . . . . . . . . . . . . . . . . 3468P-5197. . .89, 213, 347, 352–

353, 458, 461, 471–472, 476, 683–684,

693, 6988P-5394. . . . . . . . . 522, 705, 7098P-5429. . . . . . . . . . . . . . . 390–3918P-5430. . . . . . . . . . . . . . . 389–3918P-5434. . . . . . . . . . . . . . . 389–3918P-5485. . . . . . . . . . . . . . . 390–3918P-5486. . . . . . . . . . . . . . . 390–3918P-5604. . . . . . . . . . . . . . . . . . . . . 3908P-5605. . . . . . . . . . . . . . . . . . . . . 3908P-5689. . . . . . . . . . . . . . . . . . . . . 505

8P-6188. . 331, 349–350, 431,443, 460, 473, 511,513, 671, 694–695

8P-6245. . . . . . . . . . . . . . . 379, 5208P-6255. . . . . . . . . 379, 520, 7078P-6256. . . . . . . . . . . . . . . 379, 5208P-6650. . . . . . . . . 378, 381, 5208P-6651. . 364, 366–368, 478,

491–494, 496, 508–510, 513–515, 680,

692, 6978P-6652. . . . . . . . 206, 230–231,

329–330, 332, 348–349, 430, 432, 439–442, 444, 459, 669,

6738P-7002. . . 13–15, 17–18, 21,

219–220, 283, 412,425, 821

8P-7003. . . .17–18, 21, 50, 53,219–220, 229, 232,283, 412, 426, 445,

8218P-8489. . . . . . . . . . . . . . . . . . . . . 5178P-8490. . . . . . . . . . . . . . . . . . . . . 5178P-9453. . . . . . . . . 328, 347, 5088P-9454. . . . . . . . . . . . . . . 346, 4588S-0009. . . . . . . . . . . . . . . . . . . . . 3908S-0385. . . . . . . . . . . . . . . . . . . . . 5198S-0390. . . . . . . . . . . . . . . . . . . . . 5198S-0391. . . . . . . . . . . . . . . . . . . . . 5198S-0395. . .373–374, 518–5198S-0396. . . . . . . . . . . . . . . . . . . . . 3748S-0943. . . . . . . . . . . . . . . . . . . . . 3868S-0944. . . . . . . . . . . . . . . . . . . . . 3868S-1723. . . . . . . . . . . . . . . 386–3878S-1731. . . . . . . . . . . . . . . . . . . . . 3868S-2560. . 329–330, 348, 430,

459, 5318S-2589. . 358–359, 361, 489,

502–503, 535, 6898S-2590. . 358–359, 361, 489,

502–503, 535, 6898S-2931. . . . . . . . 366–368, 496,

513–5158S-3887. . .290–291, 413–4148S-4468. . .362–363, 506–5078S-4745. . .828–829, 832–8338S-4747. . .828–829, 832–8338S-5653. . 152, 250, 378–379,

382, 390, 402, 520,642, 646, 648, 652,

654, 661, 7068S-5654. . . 352–353, 462, 4798S-5656. . 152, 250, 378–379,

382, 390, 402, 520,

Part Number Index


911

642, 646, 648, 652,654, 661, 706

8S-5796. . . . . . . . . . . . . . . 354, 4628S-6212. . . . . . . . . . . . . . . 802, 8078S-9092. . 232, 332, 354, 432,

445, 462, 531, 673–674

8S-9093. . . . . . . . . . . . . . . 685, 7008T-0088 .. . . . . . . . . . . . . . . . . . . . 2528T-0281 .. . . . . .19, 51–52, 297,

444, 446, 639, 6458T-0282 .. . 14–15, 17–18, 46,

518T-0357 .. . . . . . . . . 20, 282–2838T-0359 .. . . . . . . . . . . . . . . . . 46–498T-0360 .. . . . . 88–89, 475, 4778T-0363 .. . . . . . . . . . . . . . 612, 6158T-0375 .. . . . . . . . . . . . . . 720, 7408T-0655 .. . . . . . . . . . . . . . . . . . . . 2068T-0656 .. . . . . . . . . . . . . . . . . 75–768T-0657 .. . . . . . . . . . . . . . . . . . . . . .778T-0667 .. . . . . . . . . . . . . . 307, 4968T-0672 .. . . . . . . . . . . . . . . . . . . . 6338T-0707 .. . . . . . . . . . . . . . . . . . . . 7768T-0722 .. . . . . . . . . . . . . . 254, 2878T-1159 .. . . . . . . . 569, 592, 6028T-2272 .. . .79, 81, 84, 86, 91,

212, 229, 478, 4968T-2502 .. . . . . . . . . . . . . . 669, 8008T-3282 .. . 78–83, 85, 88–90,

206–208, 212–214,306, 475–477, 568,

577, 5908T-3338 .. . . . . . . . . . . . . . . . . . . . 7388T-3573 .. . . . . . . . . . . . . . . . . . . . 3068T-3980 .. . . . . . . . 296, 299, 3028T-4001 .. . . . . . . . 752, 755, 7588T-4121 .. 254, 256, 258–260,

265–266, 285–287,289–290, 294, 769–

770, 7788T-4122 . 27–28, 30, 58, 105–

107, 131–132, 155–156, 170, 186, 200,222, 256–262, 284–287, 289, 307, 404,413, 441, 447–449,479–482, 545, 663–664, 710, 821–822

8T-4123 . 266–267, 472, 480–482, 497–498, 500,548–549, 552–553,558, 564–566, 570,579–583, 592–593,595, 733–734, 746–

748, 751–752, 829,833, 837

8T-4131 .. 497–498, 500, 583,595

8T-4132 .. 448–449, 480–482,769, 776–777

8T-4133 .. . . . . . . . 271, 292, 7698T-4136 .. 256, 258–260, 265,

285–286, 289, 2948T-4137 .. . . . . . . . . . . . . . . . . . . . 2948T-4139 .. .16, 25–26, 48, 53–

54, 56–57, 75–77,92–94, 98, 100–101,103–104, 255–258,260, 262–263, 271,284–286, 288–289,292–293, 440, 446–450, 472, 762, 767,771, 775, 778–779

8T-4140 .. .24–26, 28–30, 55–60, 297–298, 300–301, 303–304, 307–309, 447–448, 777,

8208T-4141 .. .98, 100–101, 103–

104, 107–109, 4998T-4167 .. .98–103, 108, 497–

498, 500, 603–607,612–613, 615, 628,752, 754–755, 758

8T-4172 .. . . . . . . . . . . . . . . . . . . . 7698T-4173 .. 256, 284–285, 769,

7768T-4174 .. . . . . . . . . . . . . . . . . . . . 2978T-4175 .. . . . . . . . . . . . . . . .49, 4818T-4176 . 255, 262–263, 288–

289, 4838T-4178 .. . . . . . . . . . . . . . . . . . . . 7698T-4182 .. . . . . . . . . . . . . . 770, 7788T-4183 . 16, 26, 47, 76, 262–

263, 266–267, 284–285, 290, 294, 297,300–301, 449, 557,

7788T-4184 . 91–92, 94–95, 265–

266, 271, 289–290,292–293

8T-4186 .. . . . . . . . . . . . . . 258–2608T-4187 .. . . . . . . . . . . . . . . . . . . . 4728T-4192 .. . 22–23, 54, 56–57,

271, 292, 303, 447–449, 480–481, 483,762, 766, 771, 773–

774, 7898T-4193 .. 480, 482, 547, 551,

818

8T-4194 . 27, 47, 75–77, 262–263, 268–269, 291,297–298, 449, 483

8T-4195 .. . . . . . . . 271, 290, 2928T-4196 .. . . . . . . . . . . . . . . . . . . . 2668T-4205 .. . . . . . . . . . . . . . . . . . . . 8408T-4223 .. . 21–28, 30, 53–58,

60–61, 91–95, 97–107, 156, 183, 207–208, 213–215, 221–223, 233–235, 255,263–267, 269–271,288–293, 297, 300–301, 303, 405–406,413–414, 440, 446–450, 480–481, 706,762, 767, 771, 774–775, 778–779, 789,797, 800–801, 804,809, 819, 823, 831,

8358T-4224 .. 829–830, 833–834,

837–8388T-4241 .. . . . . . . . . . . . . . . . . . . . 7218T-4244 .. .265–266, 289–2908T-4403 .. . . . . . . . . . . . . . . . . . . . 8268T-4506 .. . . . . . . . . . . . . . . . . . . . 8268T-4648 .. . . . . . . . 713, 789, 8198T-4649 .. . . . . . . . . . . . . . 497–4988T-4778 . 24–26, 55–57, 103–

104, 298, 3048T-4779 .. 448–449, 479, 481,

545, 7198T-4835 .. . 106, 183, 292, 4498T-4896 .. . . . 50, 74, 263–264,

267, 280–281, 290–291, 405, 410, 413–414, 424, 439–442,471–473, 491–492,659, 669, 680, 692–693, 797, 800–801,

822, 8398T-4898 .. . . 78, 80, 82, 84, 868T-4910 .. . . . . . . . . . . . . . . . . 16, 478T-4934 .. . . . . . . . . . . . . . 150, 1758T-4956 .. . 21–22, 24–26, 48,

98, 100–101, 103–104, 265–266, 271,289–290, 292, 448,483, 498, 767, 771,

774–7758T-4994 .. 156, 162, 170, 482,

499, 501, 664, 675–676

8T-5042 .. . . . . . . . 829, 833, 8378T-5092 .. . . . . . . . . . . . . . . . . . . . 297

8T-5360 .. 122, 124, 147, 157,168

8T-5361 . 175, 185, 200, 699–700

8T-5376 ... 723, 730, 734–7358T-5379 ... . . . . . . . . . . . . 605–6068T-5439 . 481, 570–571, 593–

594, 811–812, 814–815

8T-5460 .. 497–498, 500, 549,552–553, 558, 565–566, 570–571, 582,

593–5948T-5878 .. 308–309, 500, 544,

548, 552, 557, 563,570, 579, 592

8T-5881 ... . . . . . . . . . . . . 197–1988T-6346 ... . . . . . . . . . . . . . . . . . . 7218T-6381 ... . . . . . . . . . . . . 472, 4808T-6382 ... . . . . . . . . . . . . . . . . . . 2988T-6429 ... . . . . . . . . . . . . . . . . . . 6278T-6430 .. 500, 566, 568, 577,

583, 590, 595, 725,745, 811–812, 814–

8158T-6444 ... . . . . . . . . . . . . . . . . . . 6328T-6624 ... . . . . . . . . . . . . . . . . . . 6298T-6871 .. 155–156, 170, 186,

200, 663–6648T-7338 .. 544, 716, 770, 811,

8148T-7530 ... . . . . . . . . . . . . . . . . . . 8248T-7971 ... 793, 795, 798–7998T-8441 ... . . . . . . . . . . . . . . . . . . 6258T-8917 .. 27–28, 57–58, 208,

214–215, 263–264,267, 269–270, 290–291, 293, 405–406,413–414, 829–830,833–834, 837–839

8T-8919 ... . . 95–97, 264–265,290–291, 414, 803

8T-8924 ... . . . .27–28, 30, 156,162, 222–223, 482

8T-8927 ... . . . . . . . . . . . . . . . . . . 2008T-9101 ... . . . . . . . . . . . . . . . . . . 4918T-9389 ... . . . . . . . . . . . . 705–7068T-9398 ... . . . . . . . . . . . . . . . . . . 4998T-9399 ... . . . . . . . . . . . . . . . . . . 5018T-9598 ... . . . . . . 761, 768–7708U-1692 .. . . . . . . 642, 648, 6548U-2926 .. . . . . . . 638, 644, 6508U-2927 .. . . . . . . 638, 644, 6508U-3456 .. . . . . . . . . . . . . . . . . . . 6388V-1715... . . . . . . 570, 581, 5938V-2695... . . . . . . . . . . . . . . . . . . 659

912

Part Number Index


8V-3502... . . . . . . . . . . . . . . . . . . 6648V-3506... . . . . . . . . . . . . . . . . . . 6648V-3507... . . . . . . . . . . . . . . . . . . 6648V-4713... . . . . . . . . . . . . . . . . . . 6598V-4714... . . . . . . . . . . . . 659, 8228V-4772... . . . . 25–28, 30, 2238V-8691... . . . . . . . . . . . . . . . . . . 6638V-9106... . . . . . . . . . . . . . . . . . . 6598V-9129... . . . . . . . . . . . . 685, 7008Y-0356 ... . . . . . . . . . . . . . . . . . . . .288Y-0622 ... . . . . . . . . . . . . 246, 4028Y-1009 ... . . . . . . 263–267, 4058Y-1198 ... . 54–55, 207, 233–

2348Y-1199 ... . 55, 207, 233–2348Y-1208 ... . . . . . . . . . . . . . . . . . . . .588Y-1211 ... . . . . . . . . . . . . . . . . . . . .588Y-1254 ... . . . . . . . . . . . . . . . . . . . .588Y-1255 ... . . . . . . . . . . . . . . . . . . . .588Y-1697 ... . . . . . . . . . . . . 249, 4028Y-1698 ... . . . . . . . . . . . . 249, 4028Y-1728 ... . . . . . . . . . . . . . . . . . . 4988Y-1729 ... . . . . . . . . . . . . . . . . . . 4988Y-1730 ... . . . . . . . . . . . . . . . . . . 4988Y-1731 ... . . . . . . . . . . . . . . . . . . 4988Y-1732 ... . . . . . . . . . . . . . . . . . . 4978Y-1772 ... . . . . . . . . . . . . . . . . . . 5008Y-1773 ... . . . . . . . . . . . . . . . . . . 5008Y-1774 ... . . . . . . . . . . . . . . . . . . 5008Y-1775 ... . . . . . . . . . . . . . . . . . . 5008Y-1778 ... . . . . . . . . . . . . . . . . . . 4838Y-1779 ... . . . . . . . . . . . . 481–4828Y-1817 ... . . . . . . . . . . . . . . . . . . 2508Y-1841 ... . . . . . . . . . . . . . . . . . . 4478Y-1842 ... . . . . . . . . . . . . . . . . . . 4478Y-1853 ... . . . . . . . . . . . . . . . . . . 4468Y-1900 ... . . . . . . . . . . . . . . . . . . 4838Y-1944 ... . . . . . . . . . . . . 481–4828Y-1990 ... . . . . . . . . . . . . 447–4488Y-1993 ... . . . . . . . . . . . . . . . . . . 4488Y-1994 ... . . . . . . . . . . . . 447–4488Y-2203 ... . . . . . . . . . . . . 472–4738Y-2204 ... . . . . . . . . . . . . 472–4738Y-2210 ... . . . . . . . . . . . . . . . . . . 4498Y-2211 ... . . . . . . . . . . . . . . . . . . 4498Y-2212 ... . . . . . . . . . . . . . . . . . . 4498Y-2276 ... . . . . . . . . . . . . . . . . . . 4488Y-2279 ... . . . . . . . . . . . . . . . . . . 4498Y-2281 ... . . . . . . . . . . . . 448–4498Y-2429 ... . . . . . . . . . . . . . . . . . . 4498Y-3413 . 263–265, 267, 289–

291, 405, 413–4148Y-3437 ... . . . . . . . . . . . . . . . . . . 2678Y-3438 ... . . . . . . . . . . . . . . . . . . 2678Y-3439 ... . . . . . . . . . . . . . . . . . . 2678Y-3440 ... . . . . . . . . . . . . . . . . . . 267

8Y-5859 ... . . . . . . . . . . . . . . . . . . 4928Y-5861 ... . . . . . . . . . . . . . . . . . . 4928Y-6559 ... . . . . . . . . . . . . . . . . . . 4018Y-6625 ... . . . . . . 481–482, 5008Y-6627 ... . . . . . . . . . . . . . . . . . . 4978Y-6628 ... . . . . . . . . . . . . . . . . . . 4978Y-6629 ... . . . . . . . . . . . . . . . . . . 4808Y-6630 ... . . . . . . . . . . . . . . . . . . 4808Y-6640 ... . . . . . . . . . . . . . . . . . . 2938Y-6643 ... . . . . . . . . . . . . . . . . . . 2558Y-6644 ... . . . . . . . . . . . . . . . . . . 2558Y-6650 ... . . . . . . . . . . . . 280, 4108Y-6651 ... . . . . . . . . . . . . 280, 4108Y-6671 ... . . . . . . . . . . . . . . . . . . 4798Y-6672 ... . . . . . . . . . . . . . . . . . . 4798Y-7120 ... . . . . . . . . . . . . . . . . . . 4148Y-7121 ... . . . . . . . . . . . . . . . . . . 4148Y-7125 ...289–291, 413–4148Y-8799 ... . . . . . . . . . . . . . . . . . . 2938Y-8800 ... . . . . . . . . . . . . . . . . . . 2938Y-8822 ... . . . . . . . . . . . . . . . . . . 2938Y-8823 ... . . . . . . . . . . . . . . . . . . 2938Y-8908 ... . . . . . . . . . . . . 288, 4138Y-8909 ... . . . . . . . . . . . . 288, 4138Y-8911 ... . . . . . . . . . . . . 288, 4138Y-8912 ... . . . . . . . . . . . . 288, 4138Y-8920 ... . . . . . . . . . . . . . . . . . . 2938Y-8921 ... . . . . . . . . . . . . . . . . . . 2938Y-8948 ... . . . . . . . . . . . . . . . . . . 2938Y-8949 ... . . . . . . . . . . . . . . . . . . 2938Y-8964 ... . . . . . . . . . . . . 269, 4058Y-8967 ...269–270, 405–4068Y-8968 ...269–270, 405–4068Y-8977 ...269–270, 405–4068Y-8978 ...269–270, 405–4069B-2289 .. . . . . . . . . . . . . . . . . . . 4919B-7237 .. .74, 77, 80, 82, 84,

86, 280, 410, 424,439–442, 471–473,492, 659, 680, 692–

693, 822, 8399C-2498. .. . . . . . . 640, 646, 6529C-3416. .. . . . . . . . . . . . . . . . . . . 7109C-3628. .. . . . . . . . . . . . . . . . . . . 7109C-4224. .. . . . . . . . . . . . . 680, 6929F-2247 .. 247–249, 251–254,

279, 281, 402, 404,659, 663, 770, 793,795, 798–800, 811–812, 814–815, 825,

831, 8359G-0007 .. . . . . . . . . . . . . . . . . . . 3639G-1368 .. . . . . . . 189, 196, 1989G-1642 .. . . . . . . . . . . . . . . . . . . 5329G-2417 .. . . . . . . . . . . . . . . . . . . 1149G-2418 .. . . . . . . . . . . . . . . . . . . 114

9G-2419 .. . . . . . . . . . . . . . . . . . . 1139G-2420 .. . . . . . . . . . . . . . . . . . . 1149G-2421 .. . . . . . . . . . . . . . . . . . . 1149G-2422 .. . . . . . . . . . . . . . . . . . . 1149G-3106 .. . . . . . . . . . . . . . .40, 2259G-3110 ..7–12, 38–40, 216–

218, 225–227, 273–274, 276, 407–409,

4349G-4872 . 145–150, 155, 160,

167–169, 175, 182–184, 186, 199, 705–

7069G-5664 ..74–75, 78–84, 86–

87, 117–129, 153–154, 162, 176, 190,206, 212, 228, 307,

746, 7519G-6396 .. 314, 418, 423, 8209G-7033 .. . . . . . . . . . . . . . . . . . . 7079G-7034 .. . . . . . . . . . . . . . . . . . . 7079G-7046 .. . . . . . . . . . . . . 522, 7099G-7109 .. . . . . . . . . . . . . . . . . . . 7049G-7111 .. . . . . . . . . . . . . . . . . . . 7049G-7113 .. . . . . . . . . . . . . . . . . . . 7049G-8027 . 352–353, 478, 683,

6989G-8032 .. . . . . . . 352–353, 4789G-8300 .. . . . . . . . . . . . . 329, 4309G-8301 .. . . . . . . . . . . . . 329, 4309G-8581 .. . . . . . . . . . . . . . .11, 2179G-8582 .. . . . . . . . . . . . . . .11, 2179G-8583 .. . . . . . . . . . . . . . .11, 2169G-8584 .. . . . . . . . . . . . . . .11, 2169G-8585 .. . . .9–11, 216, 273–

274, 4079G-8586 .. . . .9–11, 216, 273–

274, 4079G-8588 .. . . . . . . . . . 10–11, 4089G-8591 .. . . . . . . . . . . . . . .11, 2179G-8592 .. . . . .7–12, 216–218,

273–274, 276, 407–409

9G-9344 .. . . . . . . . . . . . . . . . . . . 1289G-9349 . 78, 81, 83, 85, 206,

211, 2289G-9351 .. . . 21, 53, 220, 232,

283, 412, 425, 4459H-1024 .. . . . . . . . . . . . . . . . . . . . .529H-1031 . 130, 366, 392, 494,

497, 514, 522, 536,709

9H-6981 .. . . . . . . . . . . . . . . . . . . 3899H-6982 .. . . . . . . . . . . . . . . . . . . 3899H-7078 .. . . . . . . . . . . . . . . . . . . 3909H-7687 .. 365, 380, 512, 521

9H-7759 . 379–380, 520–521,707

9H-8489 .. . . . . . . 364, 510–5119H-9414 . 379–380, 520–521,

7079K-0028. . 311, 416, 637, 643,

649, 655–656, 667,820, 826

9K-0029. . 311, 416, 637, 643,649, 655–656, 667,

820, 8269K-4059. . 312, 416, 637, 643,

649, 655–656, 667,820, 826

9K-4060. . 311, 415–416, 540,637, 643, 649, 655,

667, 820, 8269K-4061. . 311–312, 415–416,

637, 643, 649, 655,667, 820, 826

9K-4062. . 312, 416, 637, 643,649, 655, 667, 820,

8269K-6628. . . . . . . . 276, 310–311,

415–416, 423, 540,637, 643, 649, 655–656, 667, 820, 826

9K-6629. . . . . . . . 276, 310–311,415–416, 422, 540,637, 643, 649, 655–656, 667, 820, 826

9K-8857. . . . . . . . . . . . . . . 315, 4189K-9113. . . . . . . . . . . . . . . 315, 4189M-0632.. . . . . . . . . . . . . 365, 5129M-3786.. . . . . . . . . . . . . . . . . . . 6289M-3818.. . . . . . . . . . . . . . . . . . . 3479M-5045.. . . . . . . . . . . . . . . . . . . 3569M-6743.. . . . . . . . . . . . . 392, 5239M-6744.. . . . . . . . . . . . . 392, 5239M-7783.. . . . . 322, 421, 663–

664, 6759M-9729.. . . . . . 364, 367–369,

492, 494–495, 497,509–511, 514–516

9M-9730.. . . . . . 117–124, 129,153, 162, 168–169,175, 183, 213, 331,348, 350, 352–353,364–369, 380, 431,443–444, 459–460,462, 471–474, 478,492–493, 495, 497,509–516, 521–522,671, 680, 692–698,

705–7069M-9758.. . . . . . . . . . . . . 364, 509

Part Number Index


913

9N-2693 .. . . . . . . 389, 391–3929N-4173 .. . . . . . . 247–248, 4029N-4174 .. . . . . . . . . . . . . 244, 4019N-4175 .. . . . . . . . . . . . . 244, 4019N-4327 .. 244, 401, 824, 8379N-4328 .. 244, 401, 824, 8379N-4501 .. . . . . . . . . . . . . . . . . . . 2449N-4502 .. . . . . . . . . . . . . . . . . . . 2449N-4680 .. 14–15, 17–18, 47,

51, 219, 2309N-4683 .. 14–15, 17–18, 47,

51, 219, 2309N-4733 .. . . . . . . 207, 222, 2349N-4736 .. . . . . . . . . . . . . . . . . . . 2229N-4737 .. . . . . . . . . . . . . . . . . . . 2229N-4740 .. . . . . . . . . . . . . . . . . . . 2229N-4741 .. . . . . . . . . . . . . . . . . . . 2229N-4742 .. . . . . . . . . . . . . . . . . . . 2229N-4743 .. . . . . . . . . . . . . . . . . . . 2229N-8381 .. . . . . . . . . . . . . . . . . . . 8269P-0201. . . 144, 150, 160, 1679P-1360. . 44–46, 50, 53, 229,

232, 4459P-1362. . . . . . . . . . .53, 232, 4459P-1367. . . . . . . . . . .53, 232, 4459P-1449. . . . . . . . . . . . . . . . . . . . . 5229P-2245. . . 74, 77–78, 80–86,

90, 205, 211, 228,477

9P-2661. . . . . . . . . . . . . . . 142, 1599P-2665. . . . . . . . . . . . . . . 142, 1599P-3308. . . . . . . . . . . . . . . . . . . . . 3819P-3309. . . . . . . . . . . . . . . . . . . . . 3819P-7782. . 319, 420, 426, 662,

674, 8279P-7786. . . . . . . . . 319, 420, 4269S-0312. . . 366, 496, 513, 6979S-1029. . . . . . . . . . . . . . . . . . . . . 5239S-1030. . . . . . . . . . . . . . . . . . . . . 5239S-1043. . . . . . . . . . . . . . . . . . . . . 3699S-1044. . . . . . . . . . . . . . . . . . . . . 3699S-1045. . . . . . . . . . . . . . . 369, 5169S-1046. . . . . . . . . . . . . . . 369, 5169S-1322. . 117–118, 121–122,

125–1279S-1363. . . . . . . . . . . . . . . 699–7009S-1366. . . . . . . . . . . . . . . . . . . . . 7069S-1669. . . . . . . . . . . . . . . 370–3719S-1670. . . . . . . . . . . . . . . 370–3719S-1671. . . . . . . . . . . . . . . 370–3719S-1838. . . . . .64, 66–69, 209–

210, 336–338, 341–342, 451–453, 455,466–469, 532–533,

7509S-2727. . . . . . . . . 376–377, 519

9S-2728. . . . . . . . . . . . . . . . . . . . . 3889S-3567. . 331, 349–350, 431,

443, 460, 474, 512,671, 681, 695

9S-3581. . 331, 349–350, 364,431, 442–443, 460,473–474, 511–512,671, 681, 694–695

9S-3582. . 331, 349–350, 364,431, 442–443, 460,473–474, 511–512,671, 681, 694–695

9S-4324. . . 378, 520, 697, 7069S-4325. . . . . . . . . . . . . . . 378, 5209S-4326. . . . . . . . . . . . . . . 378, 5209S-4536. . . . . . . . . . . . . . . 522, 7099S-4540. . . . . . . . . 522, 705, 7099S-5293. . . . . . . . . . . . . . . . . . . . . 5169S-5294. . . . . . . . . . . . . . . . . . . . . 5169S-7221. . . . . . . . . 377–378, 5209S-8245. . . . . . . . . 333, 354–3559S-8246. . . . . . . . . . . . . . . 333, 3559S-8257. . . . . . . . . . . . . . . 333, 3559S-8258. . . . . . . . . . . . . . . 333, 3559S-8304. . . . . . . . . . . . . . . 380, 5219S-8320. . 349, 473–474, 681,

6959S-8321. . . . . . . . . . . . . . . 365, 5129S-8322. . . . . . . . . . . . . . . . . . . . . 3899S-8353. . . . . . . . . . . . . . . . . . . . . 3339S-8354. . . . . . . . . . . . . . . . . . . . . 3339S-8358. . . . . . . . . . . . . . . . . . . . . 3339S-8359. . . . . . . . . . . . . . . . . . . . . 3339S-9534. . . 332, 354, 431, 4629S-9535. . 332, 354, 431, 462,

6739S-9651. . . . . . . . . . . . . . . . . . . . . 5079T-2584 .. . . . . . . . . . . . . . . . . . . . 6349U-0371 ... . . . . . . . . . . . . . . . . . 7009U-0375 ... . . . . . . . . . . . . . . . . . 7009U-8451 ... . . . . . . . . . . . . . . 95–979U-8456 ... . . . . . . . . . . . . . . 96–979U-8457 ... . . . . . . . . . . . . . . 95–979U-8459 ... . . . . . . . . . . . . . . 95, 979U-8464 ... . . . . . . . . . . . . . . 95, 979U-8468 ... . . . . . . . . . . . . . . . . . 1099U-8786 ... . . . . . . . . . . . . . . . . . . .969U-8791 ... . . . . . . . . . . . . . . 96–979U-9062 ... . . . . . . . . . . . . . . . . . . .689U-9065 ... . . . . . . . . . . . 280, 4109U-9198 ... . . . . . . . . . . . . . . 23–249U-9201 ... . . . . . 103, 105–1069U-9204 ... . . . . . 103, 105–1069U-9206 ... . . . . . . . . . . . . . . . . . . .969U-9209 ... . . . . . . . . . . . . . . . . . . .969U-9577 ... . . . . . . . . . . . . . . . . . 166

9W-0922 .. . . . . . . . . . . . . . . . . . 1379W-0929 .. . . . . . . . . . . . . . . . . . 1359W-1057 .. . . . . . 472–473, 4929W-1058 .. . . . . . . . . . . . . . . . . . 4929W-1059 .. . . . . . 472–473, 4929W-1060 .. . . . . . . . . . . . . . . . . . 4929W-1851 .. . . . . . . . . . . . . . . . . . 1739W-1852 .. . . . . . . . . . . . . . . . . . 1739W-1855 .. . . . . . . . . . . . . . . . . . 1739W-1867 .. . . . . . . . . . . . . . . . . . 1819W-1870 .. . . . . . . . . . . . . . . . . . 1819W-1996 .. . . . . . . . . . . . . . . . . . 1889W-1997 .. . . . . . . . . . . . . . . . . . 1889W-1999 .. . . . . . . . . . . . . . . . . . 1889W-2142 .. . . . . 152, 250, 378,

381, 390, 520, 640–641, 646–647, 652–653, 661, 706, 726

9W-2143 .. . . . 640–641, 646–647, 652–653, 661

9W-2144 . 641, 647, 653, 6619W-2145 .. . . . 640–641, 646–

647, 652–653, 6619W-2146 .. . . . . 296, 300, 303,

579–581, 593, 603–604, 612, 628–629,632–633, 635–636,640–641, 646–647,652–653, 661, 672–673, 682, 696, 708–709, 747–748, 752,

754, 7579W-2201 .. . . . . 389–391, 548,

552, 557, 563, 580,672–673, 682, 696,

7269W-2202 .. . . . . . . . . . . . . . . . . . 6729W-2204 .. . . . . . . . . . . . 672–6739W-2210 .. . . . . . . . . . . . . . . . . . 6969W-2212 .. . . . . . . . . . . . . . . . . . 6969W-2379 .. . . . . . . . . . . . . . . . . . 8269W-2423 .. . . . . . . . . . . . . .90, 4779W-2738 .. . . . . . . . . . . . . . . . . . 1669W-2743 .. . . . . . . . . . . . . . . . . . 1659W-2744 .. . . . . . . . . . . . . . . . . . 1659W-3137 .. . . . . 537, 546, 550,

554–556, 559, 725,727

9W-3138 .. . . . . 537, 546, 550,554–556, 559, 725,

7279W-3198 .. . . . . . . . . . . . . . . . . . 6729W-3359 .. . . . . . . . . . . . 681, 6969W-3361 .. . 31–32, 434, 537,

546–547, 550–551,554–556, 559–560,

567–568, 572–576,584–588, 725, 727–

728, 7449W-3550 .. . . . . . . . . . . . . . . . . . 1349W-3560 .. . . . . . . . . . . . . . . . . . 1379W-3563 .. . . . . . . . . . . . 373, 5189W-3619 .. . . . . 537, 546–547,

550–551, 554–556,559–560, 572–574,

725, 727–7289W-3955 .. . . . . . . . . . . . . . . . . . . .139W-4025 .. . . . . . . . . . . . . . . . . . 1359W-4194 .. . . . . 174, 182–184,

190, 1999W-4195 .. . . . . . . . . . . . . . . . . . 1899W-4264 .. . . . . . 178–179, 1889W-4265 .. . . . . . . . . . . . 164, 1739W-4334 .. . . . . . . . . . . . 244, 4019W-4335 .. . . . . . . . . . . . 244, 4019W-4355 .. . . . . . . . . . . . . . . . . . 7089W-4381 .. . 62–63, 465–466,

6149W-4465 .. . . . . . . . . . . . . . . . . . 1889W-4480 .. . . . . 145–148, 151,

161, 167–1689W-4481 .. . . . . 145–148, 151,

161, 167–1689W-4488 .. . . . . . 175, 183–1859W-4489 .. . . . . . 175, 183–1859W-4651 .. . . . . . . . . . . . . . . . . . 6329W-4652 .. . . . . . . . . . . . . . . . . . 6359W-4960 .. . . . . . . . . . . . . . . . . . 6829W-4961 .. . . . . . . . . . . . . . . . . . 6829W-4962 .. . . . . . . . . . . . . . . . . . 6819W-5187 .. . . . . . . . . . . . . .43, 2289W-5224 ..19, 206, 230–231,

250, 280, 282, 315–319, 329–332, 348–350, 354, 403, 410–411, 418–420, 424,426, 430–432, 440–442, 445, 459, 462,640, 647, 653, 659–662, 669–671, 674,827, 830, 834, 838

9W-5265 .. . . . . . . . . . . . . . . . . . 1809W-5266 .. . . . . . . . . . . . . . . . . . 1809W-5408 .. . . . . . 352–353, 4619W-5411 .. . . . . . 352–353, 4619W-5449 .. . . . . . 208, 214–2159W-5581 .. . . . . . . . . . . . 130, 4959W-5582 .. . . . . . 130, 495, 6959W-5588 .. . . . . . . . . . . . 139, 1589W-5826 .. . . . . . . . . . . . . . . . . . 1889W-5828 .. . . . . . . . . . . . . . . . . . 1889W-5933 .. . . . . . . . . . . . 188, 627

914

Part Number Index


9W-5934 .. . . . . . . . . . . . 188, 6279W-6037 .. . . . . . . . . . . . . . . . . . 1749W-6038 .. . . . . . . . . . . . . . . . . . 1759W-6039 .. . . . . . . . . . . . 174–1759W-6174 ..19, 281, 318, 410,

419, 424, 640, 646,652, 660, 671, 827

9W-6484 .. . . . . . . . . . . . . . . . . . 6909W-6632 .. . . . . . 131, 495, 6969W-6714 .. . . . . . . . . . . . . . . . . . 7089W-6715 .. . . . . . . . . . . . . . . . . . 7089W-6716 .. . . . . . . . . . . . . . . . . . 7089W-6717 .. . . . . . . . . . . . . . . . . . 7089W-6718 .. . . . . . . . . . . . . . . . . . 7089W-6726 .. . . . . . . . . . . . . . . . . . 6689W-6727 .. . . . . . . . . . . . . . . . . . 6689W-6728 .. . . . . . . . . . . . . . . . . . 6689W-6854 .. . . . . . . . . . . . . . . . . . 1809W-7259 .. . . . . . . . . . . . . . . . . . 5199W-7267 .. . . . . . . . . . . . . . . . . . 1989W-7269 .. . . . . . . . . . . . 198–1999W-7882 .. . . . . . . . . . . . . . . . . . 150

9W-7884 .. . . . . . . . . . . . . . . . . . 1509W-7939 .. . . . . . . . . . . . . . . . . . 2189W-7984 .. . . . . . . . . . . . . .13, 2189W-8045 .. . . . . . 639, 645, 6529W-8047 .. . . . . . . . . . . . . . . . . . 1549W-8182 .. . . . . . . . . . . . . . . . . . 2279W-8183 .. . . . . . . . . . . . . . . . . . 2279W-8191 .. . . . . . . . . . . . . .43, 2289W-8320 .. . . . . . . . . . . . . . . . . . 3869W-8326 .. . . . . . . . . . . . . .13, 2189W-8328 .. . . . . . . . . . . . . . . . . . 1749W-8350 .. . . . . . . . . . . . 332, 4319W-8353 .. . . . . . . . . . . . 332, 4319W-8356 .366–368, 513–5159W-8359 .366–368, 513–5159W-8381 .. . . . . . . . . . . . . . . . . . 3869W-8709 .. . . . . . . . . . . . . . . . . . 1549W-8710 .. . . . . . . . . . . . . . . . . . 1549W-8878 .. . . . . . . . . . . . 147, 4919W-8936 .. . . . . . . . . . . . 374, 5189W-8937 .. . . . . . . . . . . . . . . . . . 3739W-8938 .. . . . . . . . . . . . . . . . . . 373

9W-9058 .. . . . . 110, 112–113,305–306, 357, 359,

484–487, 5029W-9059 .. . . . . . . . . . . . . . . . . . 4859W-9060 .. . . . . . . . . . . . . . . . . . 4859W-9061 .. . . . . . . . . . . . . . . . . . 4859W-9062 .. . . . . . . . . . . . . . . . . . 4859W-9265 . 245–246, 401, 5279W-9351 .. . . . . 537, 547, 556,

561, 576, 725, 7299W-9352 .. . . . . . . . . . . . 561, 5769W-9455 .. . . . . 548, 552, 557,

563, 5789W-9498 .. . . . . . 130, 495, 6969W-9499 . 167–168, 176, 1859W-9621 .. . . . . . 191, 193–1949W-9625 .. . . . . . . . . . . . . . . . . . 6279W-9674 .. . . . . . . . . . . . 164, 1739W-9675 .. . . . . . . . . . . . 138, 1429W-9844 . 152, 154, 161, 1699X-0941. . . . . . . . . 792, 803–8069X-2327. . . . . . . . . . . . . . . . . . 44–45

9X-6618. . . . . . . . . . . . . . . . . . . . . 6279X-8257. . . . . . . . 24–26, 55–57,

103–104, 297–298,304, 545, 717–719,721–723, 731, 777,

8189X-8258. . . . . . . . 618, 620–621,

625–6269X-8268. . . . . 19, 49, 296, 300,

303, 4449X-8271. . . . . . . . . . . . . . . . . . 44–459X-8399. . . . . . . . 617, 619, 627,

629–6309X-8898. . . . . . . . . . . . . . . . . . . . . 1559X-8916. . . . . . . . . . . . . . . . . . . . . . .499Z-9261.. . . . . . . . . . . . . . . . . . . . 4909Z-9263.. . . . . . . . . . . . . . . . . . . . 490

PARTS SALES KITUNDERCARRIAGE8TH EDITION

PARTS SALES KITUN

DERCARRIAGE8TH EDITION

PECP3003-07www.cat.com

© 2015 Caterpillar. All Rights Reserved. CAT, CATERPILLAR, BUILT FOR IT, their respective logos, “Caterpillar Yellow,” the “Power Edge”trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

CAT® DEALERS DEFINE WORLD-

CLASS PRODUCT SUPPORT.We offer you the right parts and service

solutions, when and where you need them.

The Cat Dealer network of highly trained experts

is built to keep your entire fleet up and running to

maximize your equipment investment.

GET Parts caterpillar

Documents

Transcript of GET Parts caterpillar