Caterpillar Parts Book

1AEPB_CAT AUGUST 2008

3

Replacement Components

3

Arrow Engine Company introduces new complete Replacement Components for the Caterpillar 3300 series engines. No core required in exchange. The combination of components and our complete engine kits can dramatically reduce down time generated in a complete rebuild.

A101-8956 Water Cooled Manifold, 3306

A7E8368 Water Cooled Manifold, 3304

A3N5799 Water Cooled Manifold, 398 LH

A3N5800 Water Cooled Manifold, 398 RH

A9Y3638Exhaust Manifold, Turbo

A2P1784 Complete Oil Pump

A7N5909 Complete Water Pump

A8N1188L Complete Head 3304 Long ValveA8N1188S Complete Head 3304 Short Valve

A8N1187L Complete Head 3306 Long Valve

A8N1187S Complete Head 3306 Short Valve

A8N1187S-TA Complete Head 3306 Short Valve - Turbo

a company

TM

Arrow Engine Company is in no way associated with Caterpillar®. All manufacturer’s names and descriptions are used for reference only. Call 800 331-3662 for additional information and pricing.4

SleevesArrow Sleeves are centrifugally cast, 100% induction hardened, and pre-cisely honed to assure proper ring seating and oil distribution.

PistonsArrow pistons utilize a ni-resist insert to prolong the life of the piston and ring, and are carefully cam ground to assure optimal piston-to-sleeve clearance under the full range of operational conditions.

RingsArrow three ring piston ring sets utilize heavy-duty chrome plating on the top ring to reduce wear; a high strength ductile iron torsional twist compression ring to not only seal the ring face in the cylinder, but also the ring groove in the piston; and a slotted cast iron oil control ring with spiral expander to properly lubricate the cylinder bore.

G3304 HC702034

G3306 HC702035

G379 HC702026

G398 HC702027

G399 HC702028

G3304 HC703034

G3306 HC703035

G379 HC703026

G398 HC703027

G399 HC703028

G3304 HC704034 [C]

G3306 HC704035

G379 HC704026 [B] [C]

G398 HC704027 [B] [C]

G399 HC704028 [B] [C]

G3304 HC705034 [C]

G3306 HC705035

G379 HC705026 [B]

G398 HC705027 [B]

G399 HC705028 [B]

Basic EnginE Kit

Included in this kit:Sleeve KitsRod BearingsMain BearingsThrust WashersComplete Gasket Set [A]

Basic EnginE Kit with hEad Parts

Included in this kit:

Basic EnginE Kit

hEad rEBuild Kit

comPlEtE EnginE Kit


Basic EnginE Kit

camshaft Kit

watEr PumP Kit

Wrist Pin BushingsThermostatsVibration Damper

comPlEtE EnginE Kit with hEad Parts


comPlEtE EnginE Kit

hEad rEBuild Kit

Ordering InformationWhen ordering engine kits, please specify engine configura-tion. Ordering by engine serial number and arrangement number is seldom as accurate due to modifications to the engine after original manufacture. Please specify:

Piston compression ratio Valve configuration Naturally Aspirated (NA) or Turbocharged (TA) Spacer Plated or not (G3306 only)

notEs:[A] See Gasket Set section on page 8 for more information.[B] Camshaft Kit not included.[C] Vibration Damper not included.[D] Includes Balance Shaft Bearings.

Engine Kits, Head Kits, and Cam Kits

[D]

5

G3304 G3304

4

Engine Rebuild Kits - G3304

Basic Overhaul Kit HC702034

Sleeve Kit 10.5:1 Compression 4 A322734

or

Sleeve Kit 8.1:1 Compression 4 HC321434

Rod Bearing Pair 4 HC4W5739

Main Bearing Pair 5 HC4W5738

Thrust Washers 2 HC1003652

Complete Gasket Set 1 HC002134

Basic Overhaul Kit with Head Parts HC703034


or






Head Kit, Short Valve 1 HC361034

or

Head Kit, Long Valve 1 HC362034

Complete Overhaul Kit HC704034


or






Camshaft Kit 1 HC381034

Water Pump Kit 1 HC601134

Wrist Pin Bushings 4 HC8N1985

Thermostat, 175° F 1 HC1118010

Balance Shaft Bearings 4 HC9Y2991


Complete Overhaul Kit with Head Parts HC705034


or













or


Complete Overhaul Kit with Head & Water Pump

HC705037


or











Complete Head, Short Valve 1 A8N1188S

or

Complete Head, Long Valve 1 A8N1188L

Complete Water Pump 1 A7N5909

a company

TM


5

G3306 G3306




or





Complete Gasket Set, Naturally Asprirated 1 HC002735

or

Complete Gasket Set, Turbocharged 1 HC003035



or






or



or




or






or






Vibration Damper 1 HC4W0337



or






or








or


Complete Overhaul Kit with Head & Water Pump

HC705038


or






or






Complete Head, Short Valve 1 A8N1187S

or

Complete Head, Long Valve 1 A8N1187L

Complete Water Pump 1 A7N5909

7

G379 G379



Sleeve Kit 10:1 Compression 8 HC322826

or


Rod Bearing Set 8 HC8N7769

Main Bearing Set 5 HC8N7764

Thrust Washers 2 HC4L4653

Complete Gasket Set, Naturally Aspirated 1 HC002826

or




or






or


Head Kit, 3/8” Valves 1 HC361026

or




or






or


Pin Bushings 8 HC8N2275

Water Pump less Impeller & Shaft 1 HC602326

Thermostat, 180 F 1 HC4W4794

Vibration Damper 1 HV2P1793

Cam Bearings 5 HC5L2894



or






or








or


a company

TM


G398 G398




or






or




or






or



or




or






or









or






or








or


9

G399 G399




or






or




or






or



or




or






or









or






or








or


a company

TM


6

Cylinder Components

3304/3306 175° HC1118010

379, 398, 399 170° HC4W4011

180° HC4W4794

3304/3306 Spark Plug Carrier A7N1743 Included in this kit: Gasket HC2N7174 O-ring HC753206

Sleeve

Sleeves do not include o-rings. Order Sleeve O-ring Set separately, order one set per sleeve. O-ring Set includes: 3) 6L7815 & 1) 8N4708

Sleeve HC8N9174

Sleeve O-ring Set HC5P8970

Retainer HC7M4926

Piston, Bare

10 to 1 Compression HC3S1826

7 to 1 Compression HC3S1824

Piston Rings, Pins & Retainers

Three ring set. Order one set per cylinder.

Three Ring Set HC1W6055

Wrist Pin HC7N9810

Retainers HC7M4926

G379, G398, G399

10 to 1 Compression

HC322826

7 to 1 Compression

HC321626

slEEvE Kit Included in this kit: SleeveSleeve O-ring SetPiston, Pin, and RetainerPiston Rings

Sleeve

Sleeves do not include o-rings. Order Sleeve O-ring Set separately, order one set per sleeve. O-ring Set includes: 3) 5S6670 & 1) 2W6134.

Sleeve A2P8889

Sleeve O-ring Set HC5P8768

Retainer HC9H4015

Piston

Three ring piston. Includes Tapered Piston, Pin and Retainers.

10.5 to 1 Compression HC4P2654

8.1 to 1 Compression HC4P2655

Wrist Pin HC7N9804

Piston Ring Sets

Three ring set, rectangular design. Order one set per cylinder.

HC2W6091

Connecting Rod

A8N1984

G3304, G3306

10.5 to 1 Compression

HC322734


HC321434

slEEvE Kit

Included in this kit: SleeveSleeve O-ring SetPiston, Pin, and RetainerPiston Rings


3300HCSP


3300LCSP

comPlEtE slEEvE PacK

Included in this pack: Sleeve Kit (see above)3300 Series Rod

11

Lifter

G3304, G3306 HC7S3161

Camshaft

G3304 HC7C3862

G3306 HC7C3864

Cam Bearing Set

G3304 (2) 7M4046 & (1) 9M5477 HC277134

G3306 (4) 7M4046 & (1) 9M5477 HC274835

Crankshaft

G3304 3304 CRANKSHAFT

G3306 3306 CRANKSHAFT

camshaft Kit

Included in kit:CamshaftCam Bearing SetLifters

G3304 HC381034

G3306 HC380035

Camshafts, Lifters & Crankshafts

Arrow recommends replacing the vibration damper at every major overhaul to avoid crankshaft damage or failure.

3306 HC4W0337

379, 398, 399 HC2P1793

Vibration Dampers

Thermostats

Spark Plug Carrier

3304/3306 175° HC1118010

379, 398, 399 170° HC4W4011

180° HC4W4794

3304/3306 Spark Plug Carrier A7N1743 Included in this kit: Gasket HC2N7174 O-ring HC753206

{ Arrow Offers the Best Warranty in the Industry, 2 Years or 12,000 Running Hours! ) 7

a company

TM


8

Valves

Intake 5 ½" length HC2W2621

6 ½" length HC7W7490

Exhaust 5 ½" length HC2W2877

6 ½" length HC7W7491

Guides

Both 2 ¾" length HC4W9176

Both 3 ¾" length HC9Y7895

Seats

Intake 2.0485" OD HC7N4448

Intake 2.1290" OD HC5S7218

Exhaust HC7N1649

Springs

Both HC7S7144

Keepers (Locks)

Both HC2A4429

Rotators

Both HC1031800

Stem Seals

Intake 208712

hEad rEBuild Kit

Included in this kit: ValvesGuidesExhaust SeatsInt. Stem SealsO Ring SealPre Chamber Gasket

G3304, G3306

Valves

Intake 3/8" stem HC1W8606

½" stem HC7M7817

Exhaust 3/8" stem HC2W3211

½" stem HC8N3723

Guides

Intake 3/8" stem HC2N9298 ½" stem HC4N3664 Exhaust 3/8" stem HC2N9299

½" stem HC6N8847

Seats Intake HC5S1757

Exhaust HC1S5738

Springs

Dual spring, inner HC9M5349

Dual spring, outer HC9M5350

Keepers (Locks)

3/8" stem HC2A4429

½" stem HC3B1143

Retainers

Intake 3/8" stem HC1W3062

½" stem HC3H5867

Exhaust 3/8" stem HC2N9297

½" stem HC3B1142

Rotators

Both 3/8" & ½" HC7N7639

Stem Seals

Intake 3/8" stem HC8N7780

½" stem HC8F9206

G379, G398, G399

ValvesArrow valves are an upset-and-forge, high chromium, two

piece design with welded stellite on the valve face to resist heat, erosion, abrasion and impact forces.

hEad rEBuild Kit

Included in this kit:ValvesGuidesExhaust SeatsInt. Stem SealsO Ring SealPre Chamber Gasket

G379/G398/G399 3/8" stem HC360026 single head kit ½" stem HC360126

G379 3/8" stem HC361026

½" stem HC362026

G398 3/8" stem HC361027

½" stem HC362027

G399 3/8" stem HC361028

½" stem HC362028

G3304 Short Valves HC361034

Long Valves HC362034

G3306 Short Valves HC361035

Long Valves HC362035

Head Components

G3304 Short Valves A8N1188S

Long Valves A8N1188L

G3306 Short Valves A8N1187S

Long Valves A8N1187L

comPlEtE cylindEr hEads

13

9

Main Bearing Set Order Thrust Washers separately.

G3304 Std., (5) HC4W5738

.010", (5) HC8N8225

.020", (5) HC8N8226

G3306 Std., (7) HC4W5738

.010", (7) HC8N8225

.020", (7) HC8N8226

Rod Bearing Pair

Order one per rod.

Std. HC4W5739

.010" HC8N8221

.020" HC8N8222

Pin Bushing

Order one per rod.

Tapered HC8N1985

3306 Pin Bushing HC8N1849

Thrust Washer

Order two per engine.

New style with tab, .215" thick HC1003652

.591" thrust width, .186" thick HC6N8940

Cam Bearing Set

G3304 (2) 7M4046 & (1) 9M5477 HC277134

G3306 (4) 7M4046 & (1) 9M5477 HC274835

Balance Shaft Bearings

3304 (4)9Y2991

(2) 9Y2992

G3304, G3306

Main Bearing Set

Order Thrust Washers separately.

G379 Std. (5) HC8N7764

G398 Std. (7) HC8N7764

G399 Std. (9) HC8N7764

.25 HC8N7765

Rod Bearing Pair

Order one per rod.

Std. HC8N7769

.025 HC8N7770

Pin Bushing

Order one per rod.

HC8N2275

Thrust Washer

Order two per engine.

HC4L4653

Cam Bearings

G379 Standard (5) HC5L2894



G379, G398, G399

Engine Bearings

Engine BearingsAll Arrow Connecting Rod and Main Bearings utilize a superior design which incorporates the strength of a precision steel back-

ing, a layer of copper-lead alloy, and a white metal babbitt surface

layer. This con-figuration produces excellent conformity, embed-dability, and fatigue resis-tance.

a company

TM


10

Valve Cover Gasket

G3304 HC8S1606

G3306 HC8S1605

G379, G398, G399 HC2N3597

notEs:[E] Spacer plated engines only. For non-spacer plate

engines, please contact Arrow Customer Service.

toP gasKEt sEt

Includes everything required to remove and reinstall the cylinder head or heads.

G3304 HC790034

G3306 HC799235NA

G3306TA HC799236TA

G379 HC792426

G398 HC798327

G399 HC795728

fiEld ovErhaul gasKEt sEt

Sometimes referred to as an In-frame Gasket Set. Includes everything required to perform a field overhaul on an engine.

G3304 HC001134

G3306 HC001735 [E]

G379 HC001626

G398 HC001427

G399 HC001328

comPlEtE gasKEt sEt (na) Includes everything required to completely reassemble a naturally aspirated engine.

G3304 HC002134

G3306 HC002735 [E]

G379 HC002826

G398 HC002627

G399 HC002128

comPlEtE gasKEt sEt (ta)Includes everything required to completely reassemble a turbocharged engine.

G3306 HC003035 [E]

G379 HC003926

G398 HC003127

G399 HC003428

singlE hEad gasKEt sEt Includes everything required to remove and reinstall one head.

G379, G398, G399 HC770026

Arrow Gasket Sets are manufactured to fit all engines within the same serial number series. No need to determine arrangement numbers when ordering because the Sets fit all arrangement numbers.

Gasket Sets

individual gasKEts, 3300 sEriEs

3304 Head Gasket (Non-Spacer Plated) HC770026

3306 Head Gasket (Non-Spacer Plated) HC6N7263

3306 Head Gasket (Spacer Plated) HC7E6167

3304/3306 Thermostat Gasket HC7N0944

3306 Oil Pan Gasket HC8S1965

3306 Plate Gasket HC4M2969

3304/3306 Front Seal & Wear Sleeve Group HC9Y9895

3304/3306 Rear Seal and Wear Sleeve Group HC4W0452

3304/3306 Oil Cooler Gasket Set HC5P9116

3306 Top Gasket Set (Non_Spacer Plated) HC 002635

3306 Exhaust Manifold Gaskets HC856410

individual gasKEts, turBo gasKEt grouP, 3300 sEriEs

3304/3306 Gasket HC2P0406

3304/3306 Gasket HC2P6132

3304/3306 Gasket HC6L6580

3304/3306 Turbo Mounting Gasket Set HC6V1278

3304/3306 Turbo Mounting Gasket Set HC6V1279

3304/3306 Pre Chamber Gasket HC2N7174

3304/3306 Pre Chamber O-Ring HC7S3206

3304/3306 Ferrule HC7B2420

individual gasKEts, 300 sEriEs

379/398/399 Front & Rear Standard Grey Seals HC3N3166

379/398/399 Directional Rear Seal & Wear Sleeve HC4W2607

379/398/399 Directional Front Seal & Wear Sleeve HC4W2606

379/398/399 Pre Chamber Gasket HC6L1576

379/398/399 Pre Chamber O-Ring HC6L7816

379/398/399 Ferrule HC6B6224

379/398/399 Side Door Gaskets HCIF9223

15

comPlEtE watEr PumP

watEr PumP Kit, taPErEd shaft


Tapered ShaftImpellerBearingsSealsMechanical SealsGasketsO-ringsBolts

watEr PumP Kit

3304, 3306 A7N5909

watEr PumP Kit, straight shaft

Included in this kit: Straight ShaftImpellerBearingsSealsMechanical SealsGasketsO-ringsBolts

3304, 3306 HC601234

379, 398, 399 HC602326

Kit less Impeller HC601134

Kit less Impeller & Shaft HC602134

Impeller HC7N5910

Shaft HC1567088

Mechanical Seal HC4W3864

3304, 3306 HC601235

Kit less Impeller HC601235L

Kit less Impeller & Shaft HC601235LS

Arrow Water Pump Kits are manufactured to fit all engines within the same serial number series. No need to determine arrangement numbers when ordering because the kits fit all arrangement numbers.

Water Pump Kits

11

watEr PumP

Included in this kit: Base Gasket Set

Gasket

Gasket

Gasket

Seal

Seal

Seal

Seal

O-Ring

Lock Plate

HC6V6384

HC2H4513

HC5L8043

HC6L5304

HC6L1649

HC6L1650

HC6N9313

HC8N0452

HC3P0650

HC4L3759

a company

TM


12

ovErhaul Kit

high comPrEssion ovErhaul Kit, 3/8” or 1/2” hEad, 10.5 to 1 Piston

Included in this kit: Complete Gasket Set 1

Valve Grind Set - Spacer Plate 1

Rear Cover 1

E/T/TC Oil Cooler 1

Manifold 1

Oil Pump 1

S.M.F.S. 1

Cylinder Block and Oil Pan 1

Front Cover 1

Head Kit, 3/8” OR 1/2” 2

Water Pump Repair Kit 1

Piston Liner Assembly 6

Liner 1

Piston 1

Rings 1

Piston Pin 1

Wrist Pin Bushing 1

Rods 6

Mains 1

Cam Bearings 4

Cam Bearings 3

Cam Thrust Washers 2

Thermostat 1

G-970-342-3

G-970-342G

A6V7479

A6V4550

A6V4555

A5P9243

A5P9244

A6V4552

A6B4546

A6V4548

HC361042

A7M5143

A3610001

A8N5676

A7M3680

A3S4058

A7N9809

A4M9183

A8N7933

A8N7923

A4H9640

A8F8523

A8N7928

HC4W4794

CAT 342 Parts

17

13

watEr PumP

comPlEtE watEr PumP Kit

Included in this kit: Shaft

Impeller

Gaskets Set

Spacer

Key

Lock Nut

Nut

Nut

Washer

watEr PumP Kit lEss imPEllEr

watEr PumP Kit lEss imPEllEr & shaft

imPEllEr

shaft

A7M5143

A6N5986

A7M5692

A5P9553

A3L9127

A4H3157

A3L7685

A2A0053

A3H2018

A5H4342

A7M5143L

A7M5143LS

A7M5692

A6N5986

hEad comPonEnts

3/8” hEad rEBuild Kit


3/8” Exhaust ValVE

3/8” IntakE ValVE

3/8” IntakE & Exhaust GuIdE

3/8” valvE KEEPEr

Exhaust sEat

intaKE sEat

1/2” hEad rEBuild Kit


1/2” Exhaust Valve

1/2” Intake Valve

1/2” Intake & Exhaust Guide

1/2” Valve Keeper

Exhaust Seat

Intake Seat

HC361042

A1W1818

A1W1819

A1W1816

HC2A4429

A8M9810

A9M8745

HC362042

A8H1994

A8H1993

A7N2051

HC3B1143

A8M9810

A9M8745

CAT 342 Parts

not includEd in Kits

OutEr sprInG

InnEr sprInG

HC9M5350

HC9M5349

a company

TM


Replacement Components300 Series

hEat shiElds for 300 sEriEs diEsEl

379 diEsEl

Outter Shield Assembly, Right

Outter Shield Assembly, Left

Inner Shield Assembly, Right

Inner Shield Assembly, Left

398 diEsEl





399 diEsEl





A5N7970

A5N7971

A5N7952

A5N7953

A5N7976

A5N7977

A5N7948

A5N7949

A5N7982

A5N7983

A5N7956

A5N7957

Water Bypass Lower Tube Assembly

Manifold, Upper, Water Bypass HSG & Tube

Water Bypass Tubes, (1 each Upper & Lower)

A3N1376

A3N1377

A3N1378

A8L4449 Throttle Channel

A5N2669 Air Cleaner Housing - Inner

A5N2969 Air Cleaner Housing - Outer

Block Repair SleevesSeveral Engine models available - call for details

A3N5799 A3N5800Water Cooled ManifoldsCAT 398 only at this time.

19

Item Description

3300HCSP 3300 COMPLETE SLEEVE PACK

3300LCSP 3300 COMPLETE LC SLEEVE PACK

3304CRANKSHAFT 3304 CRANKSHAFT

3306CRANKSHAFT 3306 CRANKSHAFT

591-010S COIL

A101-8956 EXHAUST MANIFOLD WATER COOLED 3306

A1691750 MECHANICAL W/P SEAL

A1725185 SHAFT WATER PUMP

A1725711 INSTALLATION TOOL

A1F4622 BEARING, NEEDLE

A1N3576 BLOCK, SHORT, 3306

A1S5440 PIN, WEIGHT, GOVERNOR

A1W1816 GUIDE, INTAKE AND EXHAUST 342

A1W1818 VALVE, EXHAUST CAT 342 3/8”

A1W1819 VALVE, INTAKE CAT 342 3/8”

A1W6055 PISTON RING SET G379/G398/G399 - OE

A2034-120 CAMSHAFT, 398G

A2M2489 SEAL, LIP TYPE

A2N2560 SEAL

A2N5289 EXHAUST MANIFOLD CAT 342

A2P0220 GASKET, PUMP

A2P1784 OIL PUMP CAT 3300 SERIES

A2P8763 GASKET

A2P8889 SLEEVE CYL-CAT 3304/6-INDUCTION HARDENED

A2W2191 SEAL

A2W7679 GEAR, 3304/3306 NEW STYLE WATER PUMP

A300UBRS SLEEVE UPPER BORE REPAIR

A322734 SLEEVE KIT,10.5:1

A3400LBRS SLEEVE, REPAIR

A342LBRS SLEEVE, REPAIR

A342UBRS-SP SLEEVE, UPPER BORE REPAIR, CAT 342

A3610001 PISTON LINER ASSY

A3610002 342 SLEEVE KIT 7.5:1

A3F7445 BUSHING, ROCKER ARM 399

A3H2023 DOWEL

A3N0881 BRACE

A3N1376 TUBE ASSY, CAT 300 WATER BYPASS LOWER

A3N1377 MANIFOLD, UPPER, WATER BYPASS HSG & TUBE

A3N1378 WATER BYPASS TUBES (1/EA UPPER & LOWER)

A3N1914 TERMINAL

A3N1915 TERMINAL

A3N5799 MANIFOLD, WATER COOLED GAS 398 LH

A3N5800 MANIFOLD, WATER COOLED GAS 398 RH

A3S2713 ADJUSTING SCREW NUT

A3S4058 RINGS

A4H9640 CAM BEARINGS

A4M8303 O-RING, HOUR METER

A4M9183 WRIST PIN BUSHING

A4W5487 CHANNEL

A5B4688 PIN, TAPERED

A5M6228 BEARING, NEEDLE

A5N2668 SUPPORT

A5N2669 HOUSING, INNER AIR CLEANER

A5N2969 HOUSING, OUTER AIR CLEANER

A5N7949 HEAT SHIELD, INNER L.H. 398

A5N7952 INNER SHIELD L.H. 379

A5N7953 INNER SHIELD R.H. 379

A5N7956 INNER SHIELD, R.H. 399

A5N7957 INNER HEAT SHIELD, L.H. 399

A5N7970 OUTER SHIELD ASSY R.H. 379

A5N7971 OUTER SHIELD ASSY L.H. 379

A5N7976 HEAT SHIELD, OUTER L.H. 398

A5N7977 HEAT SHIELD, OUTER R.H. 398

A5N7982 OUTER HEAT SHIELD, R.H. 399

A5N7983 OUTER HEAT SHIELD, L.H. 399

A5P9243 GASKET MANIFOLD

A5P9553 GASKET SET

A5S5917 ADJUSTING SCREW

A6N5986 SHAFT WATER PUMP

A6V4548 GASKET FRONT COVER

A6V4550 GASKET REAR COVER

A6V4555 GASKET OIL COOLER

A6V7479 GASKET, VALVE GRIND SET

A7E8368 MANIFOLD, WATER-COOLED, 3304

A7M5143 WATER PUMP KIT CAT 342

A7M5143L WATER PUMP KIT CAT 342 LESS IMPELLER

A7M5143LS WATER PUMP KIT CAT342 LESS IMPELLER & SHAFT

A7M5692 IMPELLER

A7M7193 RACE, BEARING, THRUST

A7M7219 BEARING, THRUST

A7N0110 OIL COOLER

A7N1743 SPARK PLUG ADAPTER 3300 SERIES

A7N2051 GUIDE 1/2” INT & EXH CAT 342

A7N2372 SHAFT, RACK CONTROL

A7N2375K KIT, GOVERNOR, 3300 SERIES

A7N2375K-ABC KIT, GOVERNOR, 3300 SERIES

A7N2977 SHAFT, OUTPUT, GOVERNOR

A7N2992 INSULATOR

A7N5909 COMPLETE 3304/3306 WATER PUMP

A7N6550 BLOCK, CYLINDER, 3306

A7W2479 SPARK PLUG CABLE ASSY, CAT 3300 SERIES

A7W7488 SPACER 3304 & 3306

A8F8523 CAM BEARING

A8H1993 VALVE 1/2” INTAKE CAT 342

A8H1994 VALVE, 1/2”EXHAUST CAT 342

A8H9789 BEARING

A8L4449 CHANNEL A

A8L6376 BEARING, SLEEVE

A8M1051 LIP SEAL, MAG DRIVE

A8M9810 SEAT, EXHAUST

A8N1187 CYLINDER HEAD 3306

A8N1187L CYLINDER HEAD COMPLETE 3306 LONG VALVE

A8N1187S CYLINDER HEAD COMPLETE 3306 SHORT VALVE

A8N1187S-TA HEAD, CYLINDER, ASSY, 3306 TURBO, SHORT

A8N1188 CYLINDER HEAD 3304

Comprehensive Parts List

20

A8N1188L CYLINDER HEAD COMPLETE 3304 LONG VALVE

A8N1188S CYLINDER HEAD COMPLETE 3304 SHORT VALVE

A8N1984 ROD, 3300 SERIES

A8N5676 LINER

A8N7923 MAIN BEARING

A8N7928 MAIN BEARING, THRUST

A8N7933 BEARINGS ROD

A8S0134 BEARING, SLEEVE

A9M8745 SEAT, INTAKE

A9S0798 BEARING, SLEEVE

A9Y3638 MANIFOLD EXHAUST TURBO

A9Y6860 ONE PIECE OIL COOLER PLUNGER GASKET

AS519 CAM PLUG

G-970-342-1HC 342 OVERHAUL KIT 1/2” HD 10.5:1

G-970-342-1LC 342 OVERHAUL KIT 1/2 HD 7.5:1

G-970-342-3HC 342 OVERHAUL KIT 3/8 HD 10.5:1

G-970-342-3LC 342 OVERHAUL KIT 3/8 HD 7.5:1

G-970-342G COMPLETE GASKET SET

HC001735 FIELD OVERHAUL GASKET KIT

HC002128 COMPLETE GASKET SET, NA





HC003035 COMPLETE GASKET SET, TA



HC003926 COMPLETE GASKET SET, TA 379

HC0L0364 LOCK

HC0L1160 GASKET

HC1003652 THRUST WASHER .215” HALF

HC1118010 THERMOSTAT 175

HC1383069 REAR COVER GASKET SET

HC1567088 SHAFT WATER PUMP

HC1A7427 LOCK

HC1B3867 BEARING BALL

HC1F6936 GASKET, OIL TUBE

HC1F7178 GASKET

HC1N8354 LOCK

HC1S4810 GASKET, TURBO TUBE

HC1S5738 SEAT, VALVE EXHAUST

HC1S6595 GASKET, TURBOCHARGER TUBE

HC1W6055 PISTON RING SET G379/G398/G399

HC1W7055 WATER PUMP KIT

HC1W8606 VALVE, INTAKE 3/8”

HC274835 CAM BEARING SET

HC277134 CAM BEARING SET 3304

HC2A3278 GASKET, OIL TUBE

HC2A4429 KEEPER, VALVE SPRING

HC2A4965 LOCK

HC2B5721 GASKET

HC2B9266 LOCK

HC2F2005 SEAL

HC2H4513 Gasket

HC2M7876 STEM SEAL

HC2N0570 GASKET

HC2N1587 GASKET, TURBO TUBE

HC2N3236 Gasket, Water Manifold

HC2N3583 GASKET, OIL FILTER HOUSING

HC2N3584 GASKET, OIL FILTER HOUSING

HC2N3597 Gasket, Valve Cover

HC2N7174 GASKET

HC2N9298 Guide, Valve Intake 3/8”

HC2N9299 Guide, Valve Exhaust 3/8”

HC2P0406 GASKET

HC2P1168 BEARING

HC2P1793 DAMPER, VIBRATION

HC2P6132 GASKET

HC2P8697 GASKET

HC2S2251 SEAL

HC2S4750 GASKET, WATER LINE

HC2W2621 VALVE, INTAKE 5.5”

HC2W2877 VALVE, EXHAUST 5.5”

HC2W3211 VALVE, EXHAUST 3/8”

HC2W6091 PISTON RING SET, G3304/G3306

HC2W7621 GASKET, DIPSTICK TUBE

HC321434 SLEEVE KIT, 8.1:1

HC321626 Sleeve Kit, 7:1

HC322826 Sleeve Kit, 10:1

HC360126 SINGLE HD KIT 1/2”379/398/399

HC361027 HEAD REBUILD KIT 3/8” STEM


HC361034 HEAD REBUILD KIT SHORT VALVE

HC361035 HEAD REBUILD KIT SHORT VALVE

HC361042 HEAD REBUILD KIT CAT 342 3/8” VALVE STEM




HC362034 HEAD REBUILD KIT LONG VALVE

HC3620344 HEAD REBUILD KIT COMPLETE

HC362035 HEAD REBUILD KIT LONG VALVE

HC3620355 HEAD REBUILD KIT COMPLETE

HC362042 1/2” HEAD REBUILD KIT CAT 342

HC380035 CAMSHAFT KIT G3306

HC381034 CAMSHAFT KIT G3304

HC3B1142 RETAINER, EXHAUST 1/2”

HC3B1143 KEEPER, 1/2”

HC3H3451 LOCK

HC3H5867 RETAINER, INTAKE 1/2”

HC3N3166 SEAL, FRONT & REAR

HC3N8654 GASKET

HC3P0650 O-RING

HC3P1155 SEAL, TUBE GOVERNOR

HC3P1156 SEAL, TUBE GOVERNOR

HC3P658 O-RING

HC3S1824 PISTON, BARE 7:1 G379/G398/G399

HC3S1826 PISTON,BARE10: G379/G398/G399

HC3S5849 GASKET, TURBOCHARGER REGUL

HC3S9643 SEAL, THERMOSTAT

HC4H2494 Sleeve-Fitting

HC4H5952 GASKET

HC4L3422 GASKET

HC4L3437 GASKET

HC4L3759 LOCK PLATE, WATER PUMP

21

HC4L4653 THRUST WASHER

HC4L5832 GASKET, ELBOW

HC4L6216 GASKET, WATER FLANGE

HC4L6706 GASKET, WATER PUMP

HC4L7890 GASKET

HC4L7923 GASKET

HC4L8097 Gasket, Manifold

HC4L8128 GASKET

HC4L8149 GASKET

HC4L8175 GASKET

HC4L8191 GASKET, FRONT CAM COVER

HC4L8651 GASKET

HC4L8766 GASKET

HC4N3664 GUIDE, VALVE INTAKE 1/2”

HC4P2654 PISTON 10.5:1 G3304/G3306 W/PIN & CLIPS

HC4P2655 PISTON, 8:1 G3304/G3306 W/PIN & CLIPS

HC4W0337 Damper, Vibration

HC4W0452 SEAL & SLEEVE GROUP, REAR

HC4W2606 SEAL, FRONT CRANKSHAFT

HC4W2607 SEAL, REAR CRANKSHAFT

HC4W3864 SEAL ASSEMBLY

HC4W4011 THERMOSTAT 170

HC4W4794 THERMOSTAT 180

HC4W5738 MAIN BEARING PR., STD

HC4W5739 ROD BEARING PAIR, STD

HC4W9176 GUIDE, VALVE INTAKE & EXHAUST 2-3/4”

HC5F3106 O-RING

HC5L2894 CAM BEARING

HC5L3378 GASKET

HC5L3418 GASKET

HC5L5032 O-RING, AIR CLEANER

HC5L5986 GASKET, OIL PUMP FLANGE

HC5L6154 SEAL

HC5L8043 GASKET

HC5L8444 LOCK

HC5L8991 GASKET

HC5N4687 GASKET, OIL TUBE

HC5P76 Bolt, 12 point

HC5P8768 SLEEVE O-RING SET 3304/3306

HC5P8970 SLEEVE O-RING SET 379/398/399

HC5P9116 Oil Cooler Gasket Set

HC5P9415 CYLINDER BLOCK & PAN GASKET

HC5P9568 FRONT GASKET SET

HC5S1757 SEAT, VALVE INTAKE

HC5S7218 SEAT, VALVE INTAKE 2.1290” OD

HC601134 WATER PUMP KIT LESS IMPELLER

HC601234 WATER PUMP KIT, COMPLETE

HC601235 KIT, W/P REPAIR 3300 CAT

HC601235L KIT, W/P REPAIR 3300 CAT LESS IMPELLER

HC602134 W/P KIT LESS IMPELLER & SHAFT

HC602326 Water Pump Kit LS

HC6B6224 FERRULE

HC6F7557 GASKET

HC6H3957 BEARING, BALL

HC6L1540 GASKET

HC6L1576 Pre-Chamber Gasket

HC6L1649 SEAL

HC6L1650 SEAL

HC6L1651 SEAL

HC6L2829 GASKET

HC6L3352 GASKET

HC6L4497 GASKET

HC6L5298 GASKET

HC6L5304 GASKET

HC6L5366 GASKET

HC6L5889 GASKET

HC6L6580 GASKET

HC6L7816 O-ring

HC6L7817 O-RING

HC6L8966 GASKET, GOVERNOR DRIVE

HC6L9606 GASKET

HC6N8190 GASKET

HC6N8847 GUIDE, VALVE EXHAUST 1/2”

HC6N9313 SEAL

HC6N9339 GASKET

HC6V1277 CYLINDER BLOCK & PAN GASKET

HC6V1278 Turbo Mount Gasket Set

HC6V1279 AFTERCOOLER & LINE GASKET

HC6V2502 SPACER PLATED GASKET SET

HC6V2503 GASKET KIT

HC6V2983 REAR COVER GASKET SET

HC6V5417 GASKET SET, TOP

HC6V5418 GASKET SET, MANIFOLD

HC6V5420 GASKET SET, AFTERCOOLER &

HC6V5424 GASKET SET, FRONT COVER

HC6V5428 GASKET SET, E/T/TC OIL COOLER

HC6V5429 GASKET SET, WATERLINE

HC6V5465 BASE GASKET SET

HC6V6371 GASKET SET, TOP




HC6V6384 Base Gasket Set

HC6V6387 GASKET SET, WATER LINE


HC6V9253 Base Gasket set

HC702026 BASIC ENGINE KIT, G379




HC702035 BASIC ENGINE KIT 3306

HC703026 BASIC ENGINE KIT, HEAD PARTS





HC704026 COMPLETE ENGINE KIT


HC704028 COMPLETE ENGINE KIT G399



HC705026 ENGINE KIT WITH HEAD PARTS



22

HC705034 Engine Kit with Head Parts

HC705034U COMPLETE ENGINE KIT W/HEAD PARTS 3304

HC705035 Engine Kit with Head Parts

HC705035U COMPLETE ENGINE KIT W/HEAD PARTS 3306



HC770026 SINGLE HEAD GASKET SET.

HC790034 TOP GASKET SET G3304




HC799236 GASKET, SET, TOP, 3306 TA

HC7B2420 FERRULE

HC7C3862 CAMSHAFT, G3304

HC7C3864 CAMSHAFT, G3306

HC7D1979 O-RING

HC7E6167 GASKET, HEAD F/3306 SPACER

HC7H9832 LOCK

HC7L2031 O-RING

HC7L3111 GASKET

HC7L4487 GASKET

HC7L4518 Lock nut

HC7L8682 Gasket, Gov.

HC7M4046 Cam Bearing

HC7M4926 RETAINER, PAIR

HC7M7273 GASKET

HC7M7817 VALVE, INTAKE 1/2”

HC7N0200 GASKET

HC7N0944 Gasket, Thermostat

HC7N1649 SEAT, VALVE EXHAUST

HC7N2995 GASKET

HC7N4448 Seat, Valve Intake 2.0485” OD

HC7N5910 Impeller; G3304, G3306

HC7N7628 GASKET, WATER LINE TURBO

HC7N7639 Rotator

HC7N9804 WRIST PIN

HC7N9810 WRIST PIN

HC7S3161 Lifter 3304/3306

HC7S3206 Seal, O-Ring

HC7S6323 VALVE SPRING

HC7S7144 VALVE SPRING, INTAKE & EXHAUST

HC7W7490 Valve, Intake 6.5”

HC7W7491 Valve, Exhaust 6.5”

HC7W7544 GASKET, STEEL

HC7W7546 GASKET, STEEL

HC8B3410 WASHER

HC8F4994 O-RING

HC8H9520 SEAL, WATER PUMP

HC8L9757 GASKET, AIR CLEANER ELBOW

HC8M4432 O-RING, OIL COOLER TO OIL FILTER ADAPTER

HC8M4437 SEAL

HC8M4445 O-RING

HC8M4988 O-RING

HC8M4989 SEAL

HC8M4991 SEAL

HC8M5253 O-RING, TURBO

HC8M7587 LOCK

HC8N0452 SEAL

HC8N1849 WRIST PIN BUSHING

HC8N1985 Wrist Pin Bushing

HC8N2275 WRIST PIN BUSHING

HC8N3723 VALVE, EXHAUST 1/2”

HC8N5928 Gasket

HC8N6985 GASKET, OIL PRESSURE RELIEF

HC8N7764 MAIN BEARING, STD.

HC8N7765 MAIN BEARING, 0.025

HC8N7769 ROD BEARING, STD. UPPER & LOWER

HC8N7770 ROD BEARING, 0.025 UPPER & LOWER

HC8N7780 STEM SEAL 3/8”

HC8N8221 Rod Bearing Pr, .010

HC8N8222 Rod Bearing Pr., .020

HC8N8225 MAIN BEARING UPPER & LOWER PAIR, .010

HC8N8226 MAIN BEARING UPPER & LOWER PAIR, .020

HC8N9174 Sleeve, G379/G398/G399

HC8S1605 Gasket, Valve Cover G3306

HC8S1606 Gasket, Valve Cover G3304

HC8S1965 GASKET, OIL PAN F/3306

HC8S6410 GASKET,MANIFOLD EXHAUST

HC8S8821 OIL SEAL, WATER PUMP REPAIR

HC9H4015 SNAP RING, PAIRS

HC9H6067 SEAL

HC9M2092 O-RING

HC9M4217 O-RING, WATER LINE

HC9M4849 O-ring

HC9M5349 VALVE SPRING, INNER

HC9M5350 VALVE SPRING, OUTER

HC9M5477 CAM BEARING

HC9M9647 SEAL

HC9S8412 Lock

HC9Y2991 BEARING, BALANCE SHAFT

HC9Y2992 BEARING, BALANCE SHAFT

HC9Y7895 Valve Guide, Intake & Exhaust 3-3/4”

HC9Y9895 FRONT SEAL GROUP

HCG398 GASKET, SINGLE TOP KIT G379, G398, G399

XX6V1276 GASKET SET, TOP

XX6V2981 GASKET SET, TOP BARE

ENGINE COMPANYENGINE COMPANY®

Standard Limited Engine Parts WarrantyDelivered and sold after July 1, 2008

Special Notes:

Limited Warranty on Replacement Parts and Short Blocks:

All prices, sales conditions, and discounts in catalog and/or on discount schedule are subject to change without notice. Any use of, or reference to, any original manufacturer's name, brand, or part number in Arrow catalog does not warrant nor imply that any Arrow parts or products are manufactured or guaranteed by anyone other than Arrow Engine Company. Warranty covering any defective or failing material covers only the material in question and specifically does not include any labor necessary to replace same.

1. Arrow applies a Standard Parts Only Warranty of two (2) years or 12,000 hours to all purchased replacement parts and assemblies, including short block assemblies. Labor expenses are eligible for reimbursement.2. Removal and reinstallation expenses are not covered on service parts and short blocks. 3. Arrow makes no attempt to dictate or control the warranty given by its Distributors on engines they rebuild as customer's property or for sale as used, rebuilt engines, nor assumes responsibility for such warranties. 4. Because parts and major assemblies, with the exception of short blocks, are not serial numbered, Arrow depends upon its Distributors to carefully screen all claims relating to such items and to be certain, before filing claims, that the material claimed defective was opened only within qualifying time limitations. 5. When manufacturers of trade accessories do not have an established dealer organization authorized to consider warranty claims, Arrow will accept the return of such accessories and will process claims with the manufacturers, provided replacement parts are purchased from Arrow. In filing such claims, it becomes necessary that all pertinent information be given, such as length of service, probable cause of failure, model and serial number of engine from which accessory was removed, operating conditions, etc., so that we can give the accessory manufacturer complete information regarding the failure. Adjustments will be governed by the accessory manufacturer's reimbursement. 6. If a replacement part or assembly is found to be defective in manufacture of material prior to or at the time of installation, Arrow may, depending upon circumstances involved, elect to have the Distributor repair the part, rather than replace it in its entirety. In such cases, Arrow may elect to make an exception to its warranty policy which declines responsibility for payment of warranty labor on parts. The prime consideration will be whether repair of/ or replacing, the part is more economical. The Customer Service and Quality Departments should be consulted for a determination prior to the accomplishment of any major repairs.

Prices: All quotations are subject to change without notice, and the price in effect at the time of the order will apply.

Seller's Right to Manufacture:Seller, in its sole discretion, shall have the right to manufacture the products provided hereunder as far in advance of its estimated shipping schedule as it deems appropriate. Seller expressly reserves the right to change or modify the design and construction of any products in due course of Seller's manufacturing procedure, without incurring any obligaton or liability to furnish or install such changes, modifications or improvements on products previously or subsequently sold.

Products Not Manufactured by Arrow:With respect to products not manufactured by Arrow, Arrow makes no representations or warranties of whatsoever nature, directly or indirectly, expressed or implied including but not limited to any representations or warranties with respect to suitability, durability, fitness for a particular purpose or merchantability,except to the extent that Arrow can enforce warranties provided by the manufacturers of such parts.

Warranty Coverage:ARROW'S LIABILITY FOR ANY DAMAGES DUE OWNER SHALL BE LIMITED TO THE PURCHASE PRICE OF THE GOODS. This paragraph states purchaser's sole and exclusive remedy against Arrow for warranty. Arrow shall not be liable for any loss, damage, or injury resulting from delay in delivery or installation of the goods or for any failure to perform which is due to circumstances beyond its control. Arrow's maximum liability for damages, including, without limitation,contract damages and damages for injuries to persons or property, with respect to the goods or any services in connection with the goods, IS LIMITED TOAN AMOUNT NOT TO EXCEED THE PURCHASE PRICE OF THE GOODS. In no event shall Arrow be liable to purchaser for any incidental, consequential or special damages. The statute of limitations applicable to all claims arising under this agreement or otherwise shall be one (1) year from the date the claim accrues.

Warranty Limitations:

Limitation on Liability:SELLER'S TOTAL RESPONSIBILITY FOR ANY CLAIMS, DAMAGES, LOSSES OR LIABILITIES ARISING OUT OF, OR RELATED TO, ITS PERFORMANCE OF THISCONTRACT OR THE PRODUCTS COVERED HEREUNDER SHALL NOT EXCEED THE PURCHASE PRICE OF THE REPLACEMENT PART. In no event shall Seller be liable for any special, indirect, incidental or consequential damages of any character; but not limited to, loss of use of productive facilities of equipment, loss of profits, property damage, expenses incurred in reliance on Seller's performance hereunder, or lost production, whether suffered by Buyer or any third party. Seller disclaims all liablility for any and all costs, claims, demands, charges, expenses or other damages, either direct or indirect, incident to all property damages arising out of any cause of action based on strict liability including actions under Section 402A of the Restatement of Torts Second.

Modification, Rescission & Waiver:This contract may not be modified or rescinded nor any of its provisions waived unless such modification, rescission or waiver is in writing and signed by an officer of Seller at its offices in Tulsa, Oklahoma.

Miscellaneous:Seller reserves the right to furnish commercially equivalent or better substitutes for materials. Seller may during any periods of shortage due to causes beyond the control of Seller or its suppliers, prorate its supply of products among all of its Buyers in such manner as may be deemed equitable in the sole judgment of Seller. Seller shall not incur any liability to Buyer because of any proration hereunder. All orders must be accepted by an authorized employee of Seller. Failure of Seller in any one or more instances, upon the performance of any of the terms and conditions of this contract or the failure of Seller to excercise any of its rights hereunder shall not be construed as a waiver or relinquishment of any such term, condition or right hereunder and shall not affect Seller's right to insist upon strict performance and compliance with regard to any unexecuted portions of this contract or future performance of these terms and conditions. Customer is responsible for compliance with all applicable local, state and federal laws.

Technical Advice:Seller shall not be responsible for the results of any Technical Advice or Services rendered by any employee of Seller in connection with the design, installation, use or repair of the products sold hereunder.

a TriMas company

2301 E. Independence Tulsa, OK 74110 • (918) 583-5711 • (800) 331-3662 • Fax (918) 388-3202 www.arrowengine.com

Arrow will pay for parts and labor needed to repair engine damage directly resulting from an above defined warranty failure which occurs within the warrantyperiod stated. All warranty claims must be authorized, documented and submitted within 30 days of the failure date while under the warranty period. Costs will be limited to those required to restore the engine to the functional condition existing immediately prior to the failure and will be calculated based on the prices paid for the Arrow parts installed during the original engine build. Only straight time labor rates will be reimbursed based on a reasonable prevailing rate, not to exceed the published flat rate, for the geographic area in which the repairs are performed. Additional labor charges for overtime or holidays will not be allowed. Additionally, Arrow will pay the cost of maintenance items such as oil, anti-freeze, belts, hoses and filter elements when these items are not reusable as a result of a warrantable failure.

23

24All prices subject to change without notice.

Caterpillar Parts Book

Documents

Transcript of Caterpillar Parts Book