FVV Autumn Conference 5 – 6 October 2017 · Dr Bodo Durst (BMW) Strength & Tribology Dr Dieter...

INFORMATION SESSIONSEngines | Turbomachinery

FVV Autumn Conference 5 – 6 October 2017

The Westin Leipzig Hotel

2FVV Autumn Conference | 5 – 6 October 2017 | The Westin Leipzig Hotel

Planning Groups 2017 Overview

ENGINES

SystemDr Peter Riegger (MTU Friedrichshafen)

Combustion SIDr Bodo Durst (BMW)

Combustion CIDr Christian Weiskirch (MAN Truck & Bus)

Strength & TribologyDr Dieter Eppinger (Robert Bosch)

Engine Dynamics & AcousticsProf Dr Christoph Brands (Schaeffler Technologies)

Emissions & ImmissionsProf Dr Uwe Gärtner (Daimler)

Fuel CellsDr Michael Bauer (BMW)

TURBOMACHINERY

TurbomachineryDr Dirk Goldschmidt (Siemens)

Chairmen of the FVV Scientific Advisory CommitteeDr Tobias Lösche-ter Horst (Volkswagen) and Dr Dirk Goldschmidt (Siemens)

34567

T

21


Information Sessions 5 October 2017 | Schedule (CEST)

FVV Committee Meetings 6 October 2017 | Schedule (CEST)

ENGINES

09:30–18:00 | Information Sessions of the Engine Planning Groups (1–7) & AICE Session 11:00–11:30 Coffee Break | 13:00–14:00 Lunch Break | 15:30–16:00 Coffee Break Venue: The Westin Leipzig Hotel | Room Ballsaal

TURBOMACHINERY

10:30–17:30 | Information Session of the Turbomachinery Planning Group (T) 12:45–14:00 Lunch Break | 15:30–16:00 Coffee Break Venue: The Westin Leipzig Hotel | Room Potsdam/Meißen/Wittenberg

Start 19:00 | Evening reception for all participants in the FVV Autumn Conference Meet at the Lobby, The Westin Leipzig Hotel | Venue: Auerbachs Keller at The Mädler Passage – Grimmaische Strasse 2–4, 04109 Leipzig, Germany

09:00 – 09:45 | Annual Meeting of Members

09:45 – 10:45 | Scientific Advisory Committee

11:00 – 17:00 | Turbomachinery Planning Group (T)

11:00 – 16:00 | Engine Planning Groups (1-7)

16:00 – 18:00 | Engine Research Committee

The Friday sessions are exclusively reserved for internal FVV committee meetings. FVV members will receive the related agendas and documents fifteen days prior to the meeting.

Session Programme Page 4 – 6

Session Programme Page 7 – 8


ENGINES | ROOM BALLSAAL

09:30 » Exhaust Fuel Injection « | No 1191 Alignment of simulation methodology and measurement techniques to predict the HC distribution at catalyst inlet

PRESENTER: Verena Huth (VKA | RWTH Aachen University)

RTD: Univ-Prof Dr-Ing Stefan Pischinger (VKA | RWTH Aachen University)

CHAIRPERSON: Dr Takao Fukuma (Toyota Motor Corp)

DURATION: 01/03/2015 – 30/05/2017 (Final Report)

10:00 » Formaldehyde « | No 1187 Reduction of formaldehyde emissions from combustion engines

PRESENTERS: Prof Dr Olaf Deutschmann (ITCP | KIT Karlsruhe), Prof Dr-Ing Georg Wachtmeister (LVK | TU Munich)

RTDs: Prof Dr Olaf Deutschmann (ITCP | KIT Karlsruhe), Prof Dr-Ing Georg Wachtmeister (LVK | TU Munich)

CHAIRPERSON: Heinrich Baas (Caterpillar Energy Solutions)


10:30 » XME Diesel « | No 1005 (Bio-) methyl ether as an alternative fuel for bivalent Diesel combustion

PRESENTERS: Marius Zubel (VKA | RWTH Aachen University), Dr Martin Härtl (LVK | TU Munich)

RTDs: Univ-Prof Dr-Ing Stefan Pischinger (VKA | RWTH Aachen University), Prof Dr-Ing Georg Wachtmeister (LVK | TU Munich)

CHAIRPERSON: Dr-Ing Werner Willems (Ford Forschungszentrum Aachen)

DURATION: 01/06/2015 – 31/05/2018 (Interim Report)

11:00 Coffee Break

11:30 » CNG-DI-Engine at λ=1-Operation with Highload-EGR « | No 1202 Validation of homogeneous CNG DI combustion processes in combination with high-load EGR, Miller cycle and alternative ignition systems

PRESENTERS: Univ-Prof Dr-Ing Stefan Pischinger (VKA | RWTH Aachen University), Prof Dr-Ing Hermann Rottengruber (IMS | OVGU Magdeburg)

RTDs: Univ-Prof Dr-Ing Stefan Pischinger (VKA | RWTH Aachen University), Prof Dr-Ing Hermann Rottengruber (IMS | OVGU Magdeburg)

CHAIRPERSON: Dr-Ing Helmut Ruhland (Ford of Europe)


6

3

2

Emissions & ImmissionsProf Dr Uwe Gärtner (Daimler)

Combustion CIDr Christian Weiskirch (MAN Truck & Bus)


Session Programme 5 October 2017 | Engines (CEST)




12:00 » Knock with EGR at full load « | No 6301 Investigation and modeling of the influence of EGR on engine knock

PRESENTERS: Max Mally (VKA | RWTH Aachen University), Aleksandar Fandakov (IVK | University of Stuttgart)

RTDs: Univ-Prof Dr-Ing Heinz Pitsch (ITV | RWTH Aachen University), Univ-Prof Dr-Ing Stefan Pischinger (VKA | RWTH Aachen University), Prof Dr-Ing Michael Bargende (IVK | University of Stuttgart)

CHAIRPERSON: Dr-Ing André Casal Kulzer (Porsche)


12:30 » Particle at Otto-DI III « | No 1193 Investigations to reduce particle number emissions from GDI-engines

PRESENTER: Prof Dr Thomas Koch (IFKM | KIT Karlsruhe)

RTD: Prof Dr Thomas Koch (IFKM | KIT Karlsruhe)

CHAIRPERSON: Dr-Ing Daniel Sabathil (Adam Opel)


13:00 Lunch Break

14:00 » Combustion – Engine Friction – EGR « | AICE Insights into the project work of the Japanese Research Association for Automotive Internal Combustion Engines (AICE)

PRESENTERS: Assoc Prof Takeshi Yokomori, PhD (Mechanical Engineering Dept. | Keio University), Professor Yuji Mihara, PhD (Mechanical Engineering Dept. | Tokyo City University), Assoc Prof Kotaro Tanaka, PhD (College of Engineering | Ibaraki University)

CHAIRPERSON: Dr Takao Fukuma (Toyota Motor Corp | AICE)

15:00 » Diesel 3000 bar « | No 1167 Developing the fundamentals for the design of high pressure pumps up to 3000 bar

PRESENTER: Univ-Prof Dr-Ing Hubertus Murrenhoff (IFAS | RWTH Aachen University)

RTDs: Univ-Prof Dr-Ing Hubertus Murrenhoff (IFAS | RWTH Aachen University), Prof Dr-Ing Adrian Rienäcker (iaf | University of Kassel)

CHAIRPERSON: Dr-Ing Uwe Reuter (Ford Forschungszentrum Aachen)


15:30 Coffee Break

2

4


Strength & TribologyDr Dieter Eppinger (Robert Bosch)

AICE SessionEvery two years, at our autumn meeting, we invite you to partici-pate in a session of our Japanese partner association.




16:00 » Oiltransportation Through Piston Rings – Glas Liner « | No 1210 Oiltransportation through piston rings – Glas liner

PRESENTER: Julian Schäffer (LVK | TU Munich)

RTD: Prof Dr-Ing Georg Wachtmeister (LVK | TU Munich)

CHAIRPERSON: Dr-Ing Arnim Robota (Federal-Mogul Burscheid)


16:30 » Media Resistance WHR « | No 1184 Corrosion resistance of metals considering contact with working fluids of WHR systems

PRESENTER: Rüdiger Reitz (IfW | TU Darmstadt)

RTD: Prof Dr-Ing Matthias Oechsner (IfW | TU Darmstadt)

CHAIRPERSON: Dr-Ing Torsten Troßmann (Robert Bosch)


17:00 » Transferability of Static Friction Coefficients « | No 1182 Investigations to the transferability of model-based static friction coefficients and friction characteristics based on joined components

PRESENTER: Prof Dr-Ing Erhard Leidich (IKAT | TU Chemnitz)

RTD: Prof Dr-Ing Erhard Leidich (IKAT | TU Chemnitz)

CHAIRPERSON: Dr-Ing Anton Stich (Audi)


17:30 » JFTOT Diesel « | No 1198 Lab test development to assess internal injector deposit formation by Diesel additives

PRESENTER: Prof Dr-Ing Bert Buchholz (LKV | Uni Rostock)

RTD: Prof Dr-Ing Bert Buchholz (LKV | Uni Rostock

CHAIRPERSON: Dr Alexander von Stockhausen (Robert Bosch)


18:00 Close

4 Strength & TribologyDr Dieter Eppinger (Robert Bosch)


Session Programme 5 October 2017 | Turbomachinery (CEST)

TURBOMACHINERY | SALON POTSDAM/MEISSEN/WITTENBERG

10:30 » Transient Blade Dynamics II « | No 6311 Transient blade dynamics under consideration of mistuning effects

PRESENTER: Prof Dr-Ing Jörg Wallaschek (IDS | Leibniz Universität Hannover)

RTD: Prof Dr-Ing Jörg Wallaschek (IDS | Leibniz Universität Hannover)

CHAIRPERSON: Bertold Lübbe (Siemens)


11:15 » Journal Bearing Dynamic Stiffness « | No 6310 Testing technology adaption of journal bearing dynamic stiffness determination

PRESENTER: Philipp Zemella (ITR | Clausthal University of Technology)

RTD: Prof Dr-Ing Hubert Schwarze (ITR | Clausthal University of Technology)

CHAIRPERSON: Klaus Steff (Siemens)


12:00 » Rotordynamics for Vertical Machines « | No 1221 Development and verification of simplified calculation algorithms and tools for analysis of the dynamic properties of vertical machines and machine trains

PRESENTER: Daniel Vetter (ITR | Clausthal University of Technology)

RTD: Prof Dr-Ing Hubert Schwarze (ITR | Clausthal University of Technology)

CHAIRPERSON: Dr-Ing Christoph Weißbacher (GTW Gleitlagertechnik Weißbacher)


12:45 Lunch Break

14:00 » Bi-layer Thermal Barrier Coating Systems II « | No 1195 Development of a mechanism-based lifetime model for bi-layer thermal barrier coating systems – from microstructure to component

PRESENTER: Dr Mario Rudolphi (DFI | DECHEMA Research Institute)

RTDs: Prof Dr Robert Vaßen (IEK | Forschungszentrum Jülich), Prof Dr-Ing Matthias Oechsner (IfW | TU Darmstadt), Prof Dr-Ing Michael Schütze (DFI | DECHEMA Research Institute)

CHAIRPERSON: Dr Werner Stamm (Siemens)


T TurbomachineryDr Dirk Goldschmidt (Siemens)


Session Programme 5 October 2017 | Turbomachinery (CEST)

TURBOMACHINERY | SALON POTSDAM/MEISSEN/WITTENBERG

14:45 » Fatigue Strength in Hydrogen « | No 1163 Influence of frequency on fatigue strength of different steel types under hydrogen Exposure

PRESENTER: Prof Dr-Ing Stefan Weihe (MPA | University of Stuttgart)

RTD: Prof Dr-Ing Stefan Weihe (MPA | University of Stuttgart)

CHAIRPERSON: Angelika Schubert (Robert Bosch)


15:30 Coffee Break

16:00 » Probabilistic Methods-Creep Fatigue « | No 1181 Probabilistic lifetime assessment of high temperature components under creep-fatigue loading

PRESENTER: Felix Kölzow (IfW | TU Darmstadt)

RTD: Prof Dr-Ing Matthias Oechsner (IfW | TU Darmstadt)

CHAIRPERSON: Henning Almstedt (Siemens)


16:45 » Crack Behaviour of Welded Joints « | No 1217 Validation of flaw sizes in welded joints in power plants under flexible driving

PRESENTER: Dr-Ing Alexander Hobt (MPA | University of Stuttgart)

RTDs: Prof Dr-Ing Stefan Weihe (MPA | University of Stuttgart), Prof Dr-Ing Matthias Oechsner (IfW | TU Darmstadt)

CHAIRPERSON: Dr-Ing Shilun Sheng (Siemens)


17:30 Close

T TurbomachineryDr Dirk Goldschmidt (Siemens)


Information Registration | Accomodation | Contact

Date and venue5 – 6 October 2017

The Westin Leipzig Hotel | Gerberstrasse 15 04105 Leipzig, Germany | www.westin-leipzig.de

Evening reception: Auerbachs Keller | The Mädler Passage Grimmaische Strasse 2–4 | 04109 Leipzig, Germany www.auerbachs-keller-leipzig.de

Participant feeConference registration fee: 350.00 € (plus 19 % VAT) Participants with FVV members discount: 250.00 € (plus 19 % VAT)

The registration fee includes participation in the technical information sessions including conference documents and proceedings, lunch, coffee and snacks during breaks and access to the evening reception on 5 October 2017.

The conference language is German. All sessions are translated into English. Headsets are available for free.

Due to the increased number of participants, accompa-nying persons may participate only in exceptional cases in the evening reception. They must be registered and pay a fee of 60.00 € (including VAT).

General terms and conditionsYou may register online through the registration tool. The closing date for registrations is Friday 22 September 2017.

Participation can be cancelled free of charge until Thursday 28 September 2017. In case of cancellation after the deadline or unannounced non-participation the full participant fee will be charged.

Cancellations are to be made in writing (by e-mail, fax or standard mail). By registering you accept the general terms and conditions. All participants will receive an electronic confirmation after the registration deadline. The invoice will be issued after the event and sent by standard mail.

Hotel reservationsWe have arranged for a roomblock at »The Westin Leipzig Hotel« from 4 – 6 October 2017 at a preferential rate of 130.00 € (single room including breakfast).

The closing date is Wednesday 23 August 2017. The reservation code is »FVV«. Early booking is recommended.

T +49 341 988-1075 | F +49 341 988-1229 [email protected]

OrganisersThe event is organised by Maschinenbau-Institut GmbH Lyoner Strasse 18 | 60528 Frankfurt/M., Germany www.maschinenbau-institut.de

On behalf of FVV | The Research Association on Combustion Engines eV Lyoner Strasse 18 | 60528 Frankfurt/M., Germany www.fvv-net.de

For information please contact: Daniela Abdalla | T +49 69 6603 1345 [email protected]

Sabrina Waldstein | T +49 69 6603 1681 [email protected]

Save the datePlease note the dates for 2018: FVV Spring Conference: 22 – 23 March 2018 | Bad Neuenahr FVV Autumn Conference: 27 – 28 September 2018 | Würzburg

PARTNER ASSOCIATIONS

Mechanical Engineering Research Federation Mechanical Engineering Industry Association

FUNDING ORGANISATIONS

Federal Ministry for Economic Affairs and Energy Federation of Industrial Research Associations

FVV Autumn Conference 5 – 6 October 2017 · Dr Bodo Durst (BMW) Strength & Tribology Dr Dieter...

Documents

Transcript of FVV Autumn Conference 5 – 6 October 2017 · Dr Bodo Durst (BMW) Strength & Tribology Dr Dieter...