FUSION TRAINING, POLYETHYLENE JOINING AND …wolseleyindustrialgroup.com/pdf/650425_WIG_Trifold...
6
Classes held at any of our Industrial Plastics locations or on-site at your project anywhere on Earth! For more information call (800) 634-5082 FUSION TRAINING, POLYETHYLENE JOINING AND EQUIPMENT OPERATIONS QUALIFICATION CLASS
Transcript of FUSION TRAINING, POLYETHYLENE JOINING AND …wolseleyindustrialgroup.com/pdf/650425_WIG_Trifold...
Classes held at any of ourIndustrial Plastics locations
or on-site at your project anywhere on Earth!
For more information call(800) 634-5082
FUSION TRAINING,POLYETHYLENE JOINING AND
EQUIPMENT OPERATIONSQUALIFICATION CLASS
Small Diameter Butt FusionLearn the polyethylene joining procedures & butt fusion equipment operations for pipe sizes ranging from ½" CTS through 6" DIPS.
This class will cover the McElroy MiniMc, 1LC, 2LC & 2CU along with the No. 14 Pit Bull and Pit Bull 26.
Medium Diameter Butt FusionLearn the polyethylene joining procedures & butt fusion equipment operations for pipe sizes rang-ing from 6" IPS through 20" OD.
This class will cover the McElroy No. 28, No. 412, No.618 and TracStar 500
WOLSELEYINDUSTRIALGROUP.COM
FUSION CLASSES
DataloggerAdvance your QA/QC program with the McElroy DataLogger, and bring confi dence to your jobsite.
Large Diameter Butt FusionLearn the polyethylene joining procedures & butt fusion equipment operations for pipe sizes ranging from 24" through 65" OD.
This class will cover the McElroy 824, TracStar 630,1236 and the TracStar 900. A separate class is required when using the 1648, the 2065 and the 1600.
FUSION CLASSES
WOLSELEYINDUSTRIALGROUP.COM
Socket FusionLearn the polyethylene joining & socket fusion tooling procedures for socket fusion up to 4" IPS.
Saddle FusionLearn the polyethylene joining procedures & saddle fusion equipment operations for branch outlets up to 4” IPS.
ElectrofusionLearn all about the benefi ts of electrofusion, and the money saving benefi ts for your project. • Small diameter (1/2" through 12" DIPS) • Large Diameter (14" and larger)
FUSION CLASSES
WOLSELEYINDUSTRIALGROUP.COM
Industrial Plastics
Washougal, WAPhone: (360) 835-2129Toll Free: 800-634-5082
Lakeland, FLPhone: (863) 667-1686Toll Free: (855) 944-4373
Houston, TXPhone: (713) 491-1970Toll Free: (855) 233-4373
Polyethylene Joining and Equipment Classes
M&I Quali� cation to ASTM F2620 -12 or -13
Optional instruction to include DOT 49 CFR Part 192 Quali� cation
Optional Instruction to include ASME B3, Section IX, Part QF
CERTIFIED FUSION TRAINERS
Bill Breckenridge(520) 954-7863
Allen Stratton(317) 654-4452
WOLSELEYINDUSTRIALGROUP.COM
Certifi ed McElroy Manufacturing, Inc. Training Instructors and Qualifi ed Fusion Inspectors.
©2017 Wolseley Industrial Group 1217 650425
![Talk Fusion Diamond Rush Training PDF [RO]](https://static.fdocuments.us/doc/165x107/555b99a3d8b42ab9568b4742/talk-fusion-diamond-rush-training-pdf-ro.jpg)
