RIGOL 1

DG900

Unique SiFi II (Signal Fidelity II) technology: generate the arbitrary waveforms point by point; recover the signal without distortion; sample rate accurate and adjustable; jitter of all the output waveforms (including Sine, Pulse, etc.) as low as 200 ps 16 Mpts memory depth per channel for arbitrary waveforms Standard dual-channel with the same performance, equivalent to two

independent signal sources High frequency stability: ±1 ppm; low phase noise: -105 dBc/Hz Built-in high-order harmonic generator (at most 8-order harmonics) Built-in 7 digits/s, 240 MHz bandwidth full featured frequency counter Up to 160 built-in arbitrary waveforms, covering the common signals

in engineering application, medical electronics, auto electronics, math processing, and other various fields Sample rate up to 250 MSa/s, vertical resolution 16 bits Arbitrary waveform sequence editing function available; arbitrary

waveforms also can be generated through the PC software Various analog and digital modulation functions: AM, FM, PM, ASK, FSK,

PSK, and PWM. Standard waveform combine function, capable of outputting specified

waveforms combined with the basic waveforms Standard channel tracking function, when enabled, all the parameters of

both channels are updated based on users' configurations USB Host&Device interface (standard); USB-GPIB function supported 4.3'' TFT color touch screen RS232, PRBS, and Dual-tone outputs supported

Function/Arbitrary Waveform GeneratorSeries

RIGOL 2

Design Features

Unique SiFi II Technology

Touch-enabled UI Design

Advanced Function Output

Generate the arbitrary waveforms points by points without distorting the signals. In comparison with the last generation of the SiFi technology, SiFi II has added multiple filters, supporting the dynamic adjustment of the edge time.

Provide brand new UI operation experience, supporting the tap and drag operation gestures. You can also use the onscreen keypad to complete the parameter settings.

Support PRBS and RS232 pattern output and local Sequence editing.

100MHz Bandwidth White Gaussian Noise

RIGOL 3

The brand new heat dissipation structure design has undergone the strict thermal simulation test to ensure the steady operation of the instrument in a complex environment.

DG900 Series Function/Arbitrary Waveform Generator

Dimensions: W×H×D = 237.4 mm × 97 mm × 268 mm Weight: 1.75 kg (Package Excluded)

RIGOL 4

Function Interface

Dual-channel with the same performance

160 built-in arbitrary waveformsArbitrary waveform function with the unique SiFi II technologyⅡ

Burst function

Various analog and digital modulation functions

RIGOL 5

Sweep function

Standard harmonic generator function Dual-tone function

PRBS function RS232 function

Sequence function

RIGOL 6

Waveform combine functionStandard 7 digits/s, 240 MHz bandwidth frequency counter

Channel and system setting

File management function

RIGOL 7

DG900 series specifications

Model DG952 DG972 DG992Channel 2 2 2Max. Frequency 50 MHz 70 MHz 100 MHzSample Rate 250 MSa/s

WaveformBasic Waveforms Sine, Square, Ramp, Pulse, Noise, DC, Dual-toneAdvanced Waveforms PRBS, RS232, Sequence

Built-in Arbitrary Waveforms 160 types of waveforms, including Sinc, Exponential Rise, Exponential Fall, ECG, Gauss, HaverSine, Lorentz, etc.

Frequency CharacteristicsSine 1 μHz to 50 MHz 1 μHz to 70 MHz 1 μHz to 100 MHzSquare 1 μHz to 15 MHz 1 μHz to 20 MHz 1 μHz to 25 MHzRamp 1 μHz to 1.5 MHz 1 μHz to 1.5 MHz 1 μHz to 2 MHzPulse 1 μHz to 15 MHz 1 μHz to 20 MHz 1 μHz to 25 MHzHarmonic 1 μHz to 20 MHz 1 μHz to 20 MHz 1 μHz to 25 MHzPRBS 2 kbps to 40 Mbps 2 kbps to 50 Mbps 2 kbps to 60 MbpsDual-tone 1 μHz to 20 MHz 1 μHz to 20 MHz 1 μHz to 20 MHzRS232 baud rate range: 9600, 14400, 19200, 38400, 57600, 115200, 128000, 230400Sequence 2 k to 60 MSa/sNoise (-3 dB) 100 MHz bandwidthArbitrary Waveform 1 μHz to 15 MHz 1 μHz to 20 MHz 1 μHz to 20 MHzResolution 1 μHzAccuracy ±(1 ppm of the setting value + 10 pHz), 18℃ to 28℃

Sine Wave Spectrum Purity

Harmonic Distortion

Typical[1]

DC to 10 MHz (included): <-55 dBc10 MHz to 20 MHz (included): <-50 dBc20 MHz to 40 MHz (included): <-40 dBc>40 MHz: <-35 dBc

Total Harmonic Distortion[1] <0.075% (10 Hz to 20 kHz)

Spurious (non-harmonic)Typical[1]

≤10 MHz: <-60 dBc>10 MHz: <-60 dBc + 6 dB/octave

Phase Noise Typical (0 dBm, 10 kHz offset)10 MHz: <-105 dBc/Hz

Signal CharacteristicsSquare

Rise/Fall Time Typical (1 Vpp, 1 kHz)≤9 ns

Overshoot Typical (100 kHz, 1 Vpp)≤5%

Duty 0.01% to 99.99% (limited by the current frequency setting)Non-symmetry 1% of the period + 4 ns

Jitter (rms)Typical (1 Vpp)≤5 MHz: 2 ppm of the period + 200 ps>5 MHz: 200 ps

RampLinearity ≤1% of peak output (typical, 1 kHz, 1 VPP, 100% symmetry)Symmetry 0% to 100%

SpecificationsUnless otherwise specified, all the specifications can be guaranteed when the following two conditions are met.· The signal generator is within the calibration period.· The signal generator has been running ceaselessly for over 30 minutes under the specified operating temperature (23℃±5℃).All the specifications are guaranteed except the parameters marked with "Typical".

RIGOL 8

PulsePulse 16 ns to 1000 ks (limited by the current frequency setting)Duty 0.001% to 99.999% (limited by the current frequency setting)Rising/Falling Edge ≥8 ns (limited by the current frequency setting and pulse width setting)

Overshoot Typical (1 Vpp, 1 kHz)≤5%

Jitter (rms)Typical (1 Vpp)≤5 MHz: 2 ppm of the period + 200 ps>5 MHz: 200 ps

Arbitrary Waveform SequenceWaveform Length 16 MptsVertical Resolution 16 bits

Sample RateInterpolation filter: 10 Sa/s to 60 MSa/sStep filter: 2k Sa/s to 50 MSa/s Smooth filter: 2k Sa/s to 50 MSa/s

Min Rise/Fall TimeInterpolation filter: ≥8 nsStep filter: 3.0/sample rate Smooth filter: 1.0/sample rate

Jitter (rms)

Typical (1 Vpp)Interpolation filter: 200 psStep filter: <5 ps Smooth filter: <5 ps

Overshoot Typical (1 Vpp)≤5%

Harmonic OutputHarmonic Order ≤8Harmonic Type Even Harmonic, Odd Harmonic, Order Harmonic, UserHarmonic Amplitude The amplitude of each order of the harmonic can be set.Harmonic Phase The phase of each order of harmonic can be set.

Output CharacteristicsAmplitude (into 50 Ω)

Range

≤10 MHz: 1.0 mVpp to 10 Vpp≤30 MHz: 1.0 mVpp to 5.0 Vpp≤60 MHz: 1.0 mVpp to 2.5 Vpp>60 MHz: 1.0 mVpp to 1 Vpp

Accuracy Typical (1 kHz sine, 0 V offset, >10 mVpp, auto)±(1% of the setting value) ± 5 mV

Flatness

Typical (Sine, 1 Vpp)≤5 MHz: ±0.1 dB≤15 MHz: ±0.2 dB≤25 MHz: ±0.3 dB≤40 MHz: ±0.5 dB>40 MHz: ±1 dB

Unit Vpp, Vrms, dBmResolution 0.1 mVpp or 4 digitsOffset (into 50 Ω)Range(Peak ac+dc) ±5 Vpk ac+dcAccuracy ±(1% of the setting value + 5 mV + 1% of the amplitude)Waveform OutputOutput Impedance 50 Ω (typical)Protection Short-circuit protection, automatically disable the waveform output when overload occurs

Modulation CharacteristicsModulation Type AM, FM, PM, ASK, FSK, PSK, PWMAMCarrier Waveform Sine, Square, Ramp, ArbSource Internal/ExternalModulating Waveform Sine, Square, Ramp, Noise, ArbModulation Depth 0% to 120%Modulation Frequency 2 mHz to 1 MHzFM

RIGOL 6

Carrier Waveform Sine, Square, Ramp, ArbSource Internal/ExternalModulating Waveform Sine, Square, Ramp, Noise, ArbModulation Frequency 2 mHz to 1 MHzPMCarrier Waveform Sine, Square, Ramp, ArbSource Internal/ExternalModulating Waveform Sine, Square, Ramp, Noise, ArbPhase Deviation 0° to 360°Modulation Frequency 2 mHz to 1 MHzASKCarrier Waveform Sine, Square, Ramp, Arb Source Internal/ExternalModulating Waveform Square with 50% duty cycleKey Frequency 2 mHz to 1 MHzFSKCarrier Waveform Sine, Square, Ramp, Arb Source Internal/ExternalModulating Waveform Square with 50% duty cycleKey Frequency 2 mHz to 1 MHzPSKCarrier Waveform Sine, Square, Ramp, Arb Source Internal/ExternalModulating Waveform Square with 50% duty cycleKey Frequency 2 mHz to 1 MHzPWMCarrier Waveform PulseSource Internal/ExternalModulating Waveform Sine, Square, Ramp, Noise, ArbWidth Deviation 0% to 100% of the pulse widthModulation Frequency 2 mHz to 1 MHzExternal Modulation Input

Input Range AM, PM, FM: 75 mVRMS to ±5 (Vac+dc)ASK, PSK, FSK: standard 5 V TTL

Input Bandwidth 50 kHzInput Impedance 10 kΩ

Burst CharacteristicsCarrier Waveform Sine, Square, Ramp, Pulse, Noise, Arb, PRBS, RS232, Sequence (except DC, dual-tone, and Harmonic)Carrier Frequency 2 mHz to 10 MH 2 mHz to 20 MHz 2 mHz to 30 MHzBurst Count 1 to 1,000,000 or InfiniteInternal Period 1 μs to 500 sGated Source External TriggerSource Internal, External, ManualTrigger Delay 0 ns to 100 s

Sweep CharacteristicsCarrier Waveform Sine, Square, Ramp, ArbType Linear, Log, and StepOrientation Up/DownStart/Stop Frequency Same as the upper/lower limit of the corresponding carrier frequencySweep Time 1 ms to 500 sHold/Return Time 0 ms to 500 sSource Internal, External, ManualMarker Falling edge of the sync signal (programmable)

Frequency CounterMeasurement Function Frequency, Period, Positive/Negative Pulse Width, Duty CycleFrequency Resolution 7 digits/s (Gate Time = 1 s)

RIGOL 9

RIGOL 10

Frequency Range 1 μHz to 240 MHzPeriod Measurement Measurement Range 4 ns to 1,000 ksVoltage Range and Sensitivity (non-modulating signal)

DC CouplingDC Offset Range ±1.5 Vdc1 μHz to 100 MHz 50 mVRMS to ±2.5 (Vac+dc)100 MHz to 240 MHz 100 mVRMS to ±2.5 (Vac+dc)

AC Coupling1 μHz to 100 MHz 50 mVRMS to ±2.5 Vpp100 MHz to 240 MHz 100 mVRMS to ±2.5 Vpp

Pulse Width and Duty Cycle MeasurementFrequency and Amplitude Ranges 1 μHz to 25 MHz 50 mVRMS to ±2.5 (Vac+dc)

DC CouplingPulse WidthMin. Pulse Width ≥20 nsPulse Width Resolution 5 ns

Duty Measurement Range (display) 0% to 100%Input CharacteristicsInput Signal Range Disruptive Discharge Voltage ±7 (Vac+dc) Input Impedance = 1 MΩ

Input AdjustmentCoupling Mode AC DC

High Frequency Rejection On: Input Bandwidth = 150 kHz;Off: Input Bandwidth = 240 MHz

Input TriggerTrigger Level Range -2.5 V to +2.5 VTrigger Sensitivity Range High, Low

GateTime

1 ms 1.048 ms

10 ms 8.389 ms

100 ms 134.218 ms

1 s 1.074 s

10 s 8.590 s

>10 s >8.590 s

Trigger CharacteristicsTrig InputLevel TTL-compatibleSlope Rising or falling (selectable)Pulse Width >100 ns

Latency Sweep: <100 ns (typical)Burst: <350 ns (typical)

Trigger OutputLevel TTL-compatiblePulse Width >60 ns (typical)Max. Frequency 1 MHz

Two-channel Characteristics - Phase Offset

Range 0° to 360°

Waveform Phase Resolution 0.03°

Reference ClockExternal Reference InputLock Range 10 MHz ± 50 HzLevel 250 mVpp to 5 VppLock Time <2 sInput Impedance(Typical) 1 kΩ, AC couplingInternal Reference OutputFrequency 10 MHz ± 50 HzLevel 3.3 VppOutput Impedance(Typical) 50 Ω, AC coupling

Synchronous OutputLevel TTL-compatibleImpedance 50 Ω, nominal value

Overvoltage ProtectionOccurred when:The instrument amplitude setting is greater than 3.2 Vpp or the output AC+DC is greater than |1.6VDC| and the input voltage is greater than ±12 × (1 ± 5%)V (<10 kHz).Disruptive discharge voltage: ±5(Vac + dc).The instrument amplitude setting is smaller than or equal to 3.2 Vpp or the output AC+DC is smaller than |1.6VDC| and the input voltage is greater than ±2.6 × (1 ± 5%)V (<10 kHz).Disruptive discharge voltage: ±18(Vac + dc).

Overcurrent ProtectionOccurred when: the current is greater than ±240 mA.

Programming TimeConfiguration Changes USBFunction Change 10 msAmplitude Change 5 msFrequency Change 5 ms

General SpecificationsPower Supply

Power Voltage 100 V to 127 V (45 Hz to 440 Hz)100 V to 240 V (45 Hz to 65 Hz)

Power Consumption Lower than 30 WDisplayType 4.3-inch TFT LCD touch screenResolution 480 horizontal × RGB × 272 vertical resolutionColor 16 MEnvironment

Temperature Range Operating: 0℃ to 45℃Non-operating: -40℃ to 60℃

Cooling Method Natural air cooling

Humidity RangeBelow 30℃: ≤95%RH30℃ to 40℃: ≤75%RH40℃ to 50℃: ≤45%RH

Altitude Operating: below 3,000 metersNon-operating: below 15,000 meters

Mechanical CharacteristicsDimensions (W×H×D) 237.4 mm × 97 mm × 268 mm

Weight Package excluded: 1.75 kgPackage included: 2.85 kg

Interface USB Host, USB Device, and USB-GPIBIP Protection IP2XCalibration Interval 1 year (recommended)Certification Information

EMC

Compliant with EN61326-1:2006

IEC 61000-3-2:2000 ±4.0 kV (Contact Discharge)±4.0 kV (Air Discharge)

IEC 61000-4-3:2002 3 V/m (80 MHz to 1 GHz); 3 V/m (1.4 GHz to 2 GHz); 1 V/m (2.0 GHz to 2.7 GHz)

IEC 61000-4-4:2004 1kV power line

IEC 61000-4-5:20010.5 kV (phase-to-neutral voltage);0.5 kV (phase-to-earth voltage);1 kV (neutral-to-earth voltage)

IEC 61000-4-6:2003 3 V, 0.15 MHz to 80 MHz

IEC 61000-4-11:2004

Voltage dip: 0% UT during half cycle 0% UT during 1 cycle 70% UT during 25 cycles Short interruption: 0% UT during 1 cycle

Electrical Safety

complies with USA: UL 61010-1:2012, Canada: CAN/CSA-C22.2 No. 61010-1-2012 EN 61010-1:2010,

Note[1]: 0 dBm output, DC offset 0, impedance 50 Ω.

RIGOL 11

Options and Accessories

Description Order No

ModelDG952 (50 MHz, Dual-channel) DG952DG972 (70 MHz, Dual-channel) DG972DG992 (100 MHz, Dual-channel) DG992

Standard Accessories

1 Power Cord conforming to the standard of the destination country -1 USB Cable CB-USBA-USBB-FF-1501 BNC Cable CB-BNC-BNC-MM-1001 Quick Guide -1 Product Warranty Card -

Optional Accessories40 dB Attenuator RA5040KUSB-GPIB Interface Converter USB-GPIB-L

DSB10100-2018-08

RIGOL® is the registered trademark of RIGOL Technologies, Inc. Product information in this document subject to update without notice. For the latest information about RIGOL's products, applications and services, please contact local RIGOL office or access RIGOL official website: www.rigol.com

HEADQUARTERRIGOL TECHNOLOGIES, INC.No.8 Keling Road, New District,Suzhou, JiangSu,P.R.ChinaTel:+86-400620002Email:info@rigol.com

EUROPERIGOL TECHNOLOGIES EU GmbHLindbergh str. 482178 PuchheimGermanyTel: 0049-89/89418950Email: info-europe@rigol.com

NORTH AMERICARIGOL TECHNOLOGIES, USA INC.8140 SW Nimbus Ave.Beaverton, OR 97008Tel: 877-4-RIGOL-1Fax: 877-4-RIGOL-1Email: info@rigol.com

JAPANRIGOL TECHNOLOGIES JAPAN, LLCMJ Bldg. 3F, 1-7-4 Minato, Chuou-ku, Tokyo, Japan 104-0043Tel: +81-3-6262-8932Fax: +81-3-6262-8933Email: info-japan@rigol.com