f.sg Dg_sn Dn Ts0022uk01
-
Upload
assish-panchal -
Category
Documents
-
view
213 -
download
0
Transcript of f.sg Dg_sn Dn Ts0022uk01
-
8/2/2019 f.sg Dg_sn Dn Ts0022uk01
1/16
The unit skids of SG,DG,SN and DN series to treat and prepare fuel are an integral part ofthe industrial burners. The system, designed for oil fuel with max viscosity 65E at 50C,consists mainly of a filter, a heater, a pump and a vent valve. Electric or steam/electricheaters may be used and a double system with backup filter and pump is also available.The unit skids come ready assembled and tested for fast installation and the wide rangeof models available makes the system suitable for many different application.
TS0O22UK01
LIGHT OIL PUM PING UN IT SKIDSHEAV Y OIL HEATING AN D PU M PING UNIT SKIDS
FOR INDUSTRIAL BURNERS
SG and DG SERI ES* 380 3600 l/h
SN and DN SERI ES* * 540 3600 l/h
* * pre - set at 30 bar
* pre - set at 28 bar
-
8/2/2019 f.sg Dg_sn Dn Ts0022uk01
2/16
GENERAL DESCRIPTION
HYDRAULIC LAY-OUT
TECHNICAL DESCRIPTION
TECHNICAL DATA
OVERALL DIMENSIONS
LIST OF AVAILABLE MODELS
STATE OF SUPPLY
GENERAL DESCRIPTION
HYDRAULIC LAY-OUT
TECHNICAL DESCRIPTION
TECHNICAL DATA
OVERALL DIMENSIONS
LIST OF AVAILABLE MODELS
STATE OF SUPPLY
DESIGNATION OF SERIES
AVAILABLE ACCESSORIES
IND EX OF CONTENTS
LIGHT OIL PUM PING UN IT SKIDS
Since the Company is constantly engaged in the production improvement, the aesthetic and dimensional features,the technical data, the equipment and the accessories can be changed.This document contains confidential and proprietary information of RIELLO S.p.A. Unless authorised, this informationshall not be divulged, nor duplicated in whole or in part.
The following index, divided in sections, allows search of interest arguments inside the presentbrochure.
HEAVY OIL HEATING AND PUMPING UNIT SKIDS
ACCESSORIES
SPECIFICATION
-
8/2/2019 f.sg Dg_sn Dn Ts0022uk01
3/16
B
F
PO
PMP
VR
VC
MM
Gas separator bot tle
Selfcleaning f ilter
Minim um oil pressure switch
Pumping group with pressure regulatorPump electric motor
Pressure regolator valve of degasing uni t
Drainage valve (normally closed)
Pressure gauge on the delivery circuit
LIGHT OIL PUM PING UN IT SKIDS
The unit skids of SG and DG series are designed to t reat and prepare ligh t oil ; they consists mainlyof a filter, a pump and a vent valve.The unit skids come ready assembled and tested for fast installation and the wide range of modelsavailable makes the system suitable fo r m any different appli cation.
SG Models DG Models
Figure A Figure B
BURNER
P
MP
F F
MP
P
MM
PO
VR
VC
B
MAIN RING
M M
Example of light oil pumping unit skid of SG series
MM
VR
VC
MAIN RING
PO
B
F
P
MP
M
BURNER
-
8/2/2019 f.sg Dg_sn Dn Ts0022uk01
4/16
LIGHT OIL PUM PING U NIT SKIDS - TECHNICAL DATA
SG 160 3/400/50 R 1/2 430 380 -0,6 / 5 1,1 2800 160
SG 250 3/400/50 R 1/2 690 610 -0,6 / 5 1,5 2800 280
SG 320 3/400/50 R 1/2 910 810 -0,6 / 5 1,5 2800 360
SG 4003/400/50
R 1/21270 1140
-0,6 / 52,2 2800 510
3/440/60 1520 1370 2,5 3400 610
SG 5003/400/50
R 3/41440 1200
-0,6 / 52,2 1400 540
3/440/60 1730 1440 2,5 1700 650
SG 8003/400/50
R 3/41960 1700
-0,6 / 53 1400 810
3/440/60 2350 2040 3,5 1700 960
SG 10003/400/50
R 12800 2200
-0,6 / 54 1400 1060
3/440/60 3360 2640 4,4 1700 1220
SG 15003/400/50
R 14000 3600
-0,6 / 55,5 1400 1620
3/440/60 4800 4320 6,3 1700 1950
DG 160 3/400/50 R 1/2 430 380 -0,6 / 5 1,1+1,1 2800 160
DG 250 3/400/50 R 1/2 690 610 -0,6 / 5 1,5+1,5 2800 280
DG 320 3/400/50 R 1/2 910 810 -0,6 / 5 1,5+1,5 2800 360
DG 4003/400/50
R 1/21270 1140
-0,6 / 52,2+2,2 2800 510
3/440/60 1520 1370 2,5+2,5 3400 610
DG 5003/400/50
R 3/41440 1200
-0,6 / 52,2+2,2 1400 540
3/440/60 1730 1440 2,5+2,5 1700 650
DG 8003/400/50
R 3/41960 1700
-0,6 / 53+3 1400 810
3/440/60 2350 2040 3,5+3,5 1700 960
DG 10003/400/50
R 12800 2200
-0,6 / 54+4 1400 1060
3/440/60 3360 2640 4,4+4,4 1700 1220
DG 1500 3/400/50 R 1 4000 3600 -0,6 / 5 5,5+5,5 1400 16203/440/60 4800 4320 6,3+6,3 1700 1950
Model Electrical Connection Delivery Delivery Aspiration Electric M otor M axsupply IN/ OUT at 15 bar at 28 bar pressure motor speed delivery *
min/ max powerPh/ V/ Hz [l/ h] [l/ h] [bar] [kW] [rpm] [kg/ h]
* at 28 bar
LIGHT OIL PUMPING UNIT SKIDS - TECHNICAL DESCRIPTION
The unit skids of SG and DG series are an in tegral part o f the industrial burners; they are equippedwith:- a self-cleaning filter for a treatment of fuel (see F fig. A-B)- a motorised pum ping group wi th pressure regulator (see P and MP fig. A-B)- a pressure gauge on the delivery circuit (see MM fig. A-B)
- a minimum oil pressure switch on the delivery circuit to check the supply pressure to the burner(see PO fig. A-B)
- a gas separator bot tle to prevent problem of air in the oil circuit (see B fig. A-B)- a pressure regulator valve of gas separator bottle to m aintain the correct value of pressure in thedegasing unit (see VR fig. A)
- a drainage valve (normally closed) to facilitate the start-up and maintenance (see VC fig. A-B).
The unit skids of DG series have a double pum ping group w ith filt er to enable operation duringmaintenance or break-down phases (see fig. B).
With ligh t oil fuel, the supply circuit from the tank to the unit skids of the burner can be of two types:- by suction- pump assisted main ring (typ ical supply condition : 1 bar)
Please contact the Riello Burners Technical Office for different necessity of operation fromthose above indicated.
n o t e
-
8/2/2019 f.sg Dg_sn Dn Ts0022uk01
5/16
OVERALL DIMENSIONS (mm)
LIGHT OIL PUM PING UN IT SKIDS
Model
SG 160 1000 400 600
SG 250 1000 400 600
SG 320 1000 400 600
SG 400 1000 400 600
SG 500 1000 400 600SG 800 1000 400 600
SG 1000 1300 400 650
SG 1500 1300 400 650
DG 160 1000 600 600
DG 250 1000 600 600
DG 320 1000 600 600
DG 400 1000 600 600
DG 500 1000 600 600
DG 800 1000 600 600
DG 1000 1300 800 650
DG 1500 1300 800 650
X
Z
Y
PACKAGING
A B C
ModelSG 160 1260 640 840SG 250 1260 640 840SG 320 1260 640 840SG 400 1260 640 840
SG 500 1260 640 840SG 800 1260 640 840SG 1000 1560 640 890SG 1500 1560 640 890DG 160 1260 840 840DG 250 1260 840 840DG 320 1260 840 840DG 400 1260 840 840DG 500 1260 840 840DG 800 1260 840 840DG 1000 1560 1040 890DG 1500 1560 1040 890
X Y Z
C
B
A
-
8/2/2019 f.sg Dg_sn Dn Ts0022uk01
6/16
LIGHT OIL PUMPING UNIT SKIDS - LIST OF AVAILABLE MODELS
Single pumping unit
SG 160 SB 3/400/50 230/50-60SG 250 SB 3/400/50 230/50-60SG 320 SB 3/400/50 230/50-60SG 400 SB 3/400/50-3/440/60 230/50-60SG 500 SB 3/400/50-3/440/60 230/50-60SG 800 SB 3/400/50-3/440/60 230/50-60SG 1000 SB 3/400/50-3/440/60 230/50-60SG 1500 SB 3/400/50-3/440/60 230/50-60
Other versions are available on request.
Pumping un it skids supplied, in function of m odel, for filtering and to pressurize light oil, made upof :- Base in painted steel sheet- Manual shut off valve on the output circuit- Self-cleaning f ilter (doub le on the D version)- Gas separator group- Pressure regulator valve of gas separator bottle
- Pumping group w ith pressure regulator (doub le on the D version)- Pressure gauge- Minim um oil pressure switch- Drainage valve- Shunt box.
Available accessories to be ordered separately:- Pumping unit for m ain ring- Autom atic gas separator- Line filter- Pressure regulator.
(See accessories section).
Double pumping unit
DG 160 SB 3/400/50 230/50-60DG 250 SB 3/400/50 230/50-60DG 320 SB 3/400/50 230/50-60DG 400 SB 3/400/50-3/440/60 230/50-60DG 500 SB 3/400/50-3/440/60 230/50-60DG 800 SB 3/400/50-3/440/60 230/50-60DG 1000 SB 3/400/50-3/440/60 230/50-60DG 1500 SB 3/400/50-3/440/60 230/50-60
LIGHT OIL PUM PING U NIT SKIDS - STATE OF SUPPLY
-
8/2/2019 f.sg Dg_sn Dn Ts0022uk01
7/16
B
F
PO
RS
P
MPPS
TM
Tm
VR
VC
VV
MM
TP
VS
Gas separator bott le
Selfcleaning f ilter
Minim um oil pressure switch
Heating cartridge
Pumping group with pressure regulator
Pump electric motorHeavy oil heater
Maximum thermostat
Minimum thermostat
Pressure regolator valve of degasing un it
Drainage valve (normally closed)
Steam circuit solenoid valve
Pressure gauge on the delivery circuit
Temperature probe
Safety valve
HEAVY OIL HEATING ANDPUM PING UNIT SKIDS
The unit skids of SN-EP, DN-EP, SN-EV and DN-EV series are designedto treat and prepare heavy oil with m ax viscosity 65E at 50C; theyconsists mainly of a filter, a heater, a pump and a vent valve.The heater can be Electrical or Electrical/Steam type.The unit skids come ready assembled and tested for fast installation and the wide range of modelsavailable makes the system suitable for m any different application.
Figure C Figure D
RS
MM
P
MP
M
RS
MM
P
MP
M
RSF
RSF
RS
B
DN EP Models
RS
MM
RSF
RS
B
SN EP Models
VR
VC
MAIN RING
BURNER
TP
PO
TM
Tm
PS
VR
VC
MAIN RING
BURNER
TP
PO
TM
Tm
PS
P
MP
M
Example of heavy oil Heating and Pumping unit skid of SN-EV series
-
8/2/2019 f.sg Dg_sn Dn Ts0022uk01
8/16
RS
MM
P
MP
M
RS
MM
P
MP
M
RSF
RSF
RS
B
VR
VC
MAIN RING
BURNER
TP
PO
TM
Tm
PS
VV
VS
DN EV Models
RS
MM
RSF
RS
B
SN EV Models
Figure E Figure F
VR
VC
MAIN RING
BURNER
TP
PO
TM
Tm
PS
VV
VS
P
MP
M
HEAVY OIL HEATING AN D PU M PING U NIT SKID S - TECHNICAL DESCRIPTION
The un it skids of SN-EP, DN-EP, SN-EV and DN-EV series are an integral part of the industr ialburners; they are equipped with:- a self-cleaning filt er, heated by electri cal resistance, for a treatm ent o f f uel (see F fig. C-D-E-F)- a moto rised pum ping group w ith p ressure regulator, heated by electrical resistance (see P and
MP fig. C-D-E-F)- a pressure gauge on the del ivery circuit (see MM fig . C-D-E-F)- an electrical or electrical/steam heavy oi l heaters (see PS fig. C-D-E-F)- a minim um and a maximum thermostat to check the oil supply temperature to the burner (see
Tm and TM fig . C-D-E-F)
- a minim um oil pressure swi tch on the delivery circuit to check the oil supply p ressure to theburner (see PO fig . C-D-E-F)- a temperature probe for the electronic cont rol (see TP fig . C-D-E-F)- a gas separator bottl e, heated by electrical resistance, to prevent problem of air in the oil circuit
(see B fig C-D-E-F)- a pressure regulator valve of gas separator bottle to m aintain the correct value of pressure in the
degasing unit (see VR fig. C-D-E-F)- a drainage valve (normally closed) to facilitate the start-up and maintenance (see VC fig. C-D-E-F).
The electrical/steam heaters of SN-EV and DN-EV series are furthermore equipped with:- a steam circuit solenoid valve to allow steam passage trough the heater- a safety valve
An electronic control device on the basis of requi red heat, regulates steam circuit solenoid valve
opening and electrical resistances energising to m aintain heavy oil temperature at the correct value.
The unit skids of DN-EP and DN-EV series have a double pum ping group w ith f ilter and pressuregauge to enable operation during maintenance or break-down phases (see fig. D-F).
With heavy oil fuel, the supply circuit from the tank to the unit skids of the burner is a pump assistedmain ring (typical supply condit ion: 1,5 bar 60C)
-
8/2/2019 f.sg Dg_sn Dn Ts0022uk01
9/16
* at 30 bar
* * in steam heating operation 30% of required output is electrical integrated.
Please contact the Riello Burners Technical Office for different necessity of operation f rom thoseabove indicated.
n o t e
540648700840
1200144012001440170020402200264036004320540648700840
1200144012001440170020402200264036004320540648700840
1200
1440120014401700204017002040220026403600432036004320540648700840
1200
1440120014401700204017002040220026403600432036004320
26529035043054060059070081081010851290155016402652903504305406005907008108101085129015501640265300345400415
415590700700800800800108313001500150020002000265300345400415
415590700700800800800108313001500150020002000
14
20
28
40
40
60
80
14
20
28
40
40
60
80
15
15
15
20
25
30
40
50
60
15
15
15
20
25
30
40
50
60
15
22,5
31
43
44
67
89
15
22,5
31
43
44
67
89
580700950
11401400168014001680190022802700324054006480580700950
11401400168014001680190022802700324054006480580700950
11401400
1680140016801900228019002280270032405400648054006480580700950
11401400
1680140016801900228019002280270032405400648054006480
-0,6 / 5
-0,6 / 5
-0,6 / 5
-0,6 / 5
-0,6 / 5
-0,6 / 5
-0,6 / 5
-0,6 / 5
-0,6 / 5
-0,6 / 5
-0,6 / 5
-0,6 / 5
-0,6 / 5
-0,6 / 5
-0,6 / 5
-0,6 / 5
-0,6 / 5
-0,6 / 5
-0,6 / 5
-0,6 / 5
-0,6 / 5
-0,6 / 5
-0,6 / 5
-0,6 / 5
-0,6 / 5
-0,6 / 5
-0,6 / 5
-0,6 / 5
-0,6 / 5
-0,6 / 5
-0,6 / 5
-0,6 / 5
1,11,271,51,82,22,52,22,53
3,55,56,37,58,6
1,1+1,11,27+1,271,5+1,51,8+1,82,2+2,22,5+2,52,2+2,22,5+2,5
3+33,5+3,55,5+5,56,3+6,37,5+7,58,6+8,6
1,11,271,51,82,2
2,52,22,53
3,53
3,55,56,37,58,67,58,6
1,1 + 1,11,27+1,271,5 + 1,51,8+1,8
2,2 + 2,2
2,5+2,52,2 + 2,22,5+2,5
3 +33,5+3,5
3 +33,5+3,55,5 +5,56,3+6,37,5 +7,58,6+8,67,5 +7,58,6+8,6
140017001400170014001700140017001400170014001700140017001400170014001700140017001400170014001700140017001400170014001700140017001400
170014001700140017001400170014001700140017001400170014001700140017001400
1700140017001400170014001700140017001400170014001700
3/400/503/440/603/400/503/440/603/400/503/440/603/400/503/440/603/400/503/440/603/400/503/440/603/400/503/440/603/400/503/440/603/400/503/440/603/400/503/440/603/400/503/440/603/400/503/440/603/400/503/440/603/400/503/440/603/400/503/440/603/400/503/440/603/400/50
3/440/603/400/503/440/603/400/503/440/603/400/503/440/603/400/503/440/603/400/503/440/603/400/503/440/603/400/503/440/603/400/503/440/603/400/50
3/440/603/400/503/440/603/400/503/440/603/400/503/440/603/400/503/440/603/400/503/440/603/400/503/440/60
16,516,817
17,518
18,322,522,828,529
33,534464758596869
16,516,817
17,518
18,322,522,828,529
33,534464758596869
R 1/2
R 3/4
R 3/4
R 3/4
R 3/4
R 1
R 1
R 1/2
R 3/4
R 3/4
R 3/4
R 3/4
R 1
R 1
R 1/2
R 3/4
R 3/4
R 3/4
R 3/4
R 3/4
R 1
R 1
R 1
R 1/2
R 3/4
R 3/4
R 3/4
R 3/4
R 3/4
R 1
R 1
R 1
Deliveryat 30 bar
[l/ h]
Maxdelivery *
[kg/h]
Heatingelectrical
power[kW]
Totalelectrical
power[kW]
Model Deliveryat 15 bar
[l/h]
Aspirationpressure
min/ max[bar]
Electricmotor
power[kW]
Motorspeed
[rpm]
Electricalsupply
Ph/V/Hz
Connection
IN/OUT
HEAVY OIL HEATING AN D PU M PING UN IT SKIDS - TECHNICAL DATA
SN 250 EP
SN 320 EP
SN 400 EP
SN 650 EP
SN 800 EP
SN 1000 EP
SN 1500 EP
DN 250 EP
DN 320 EP
DN 400 EP
DN 650 EP
DN 800 EP
DN 1000 EP
DN 1500 EP
SN 250 EV
SN 320 EV
SN 400 EV
SN 500 EV
SN 650 EV
SN 800 EV
SN 1000 EV
SN 1500 EV
SN 2000 EV
DN 250 EV
DN 320 EV
DN 400 EV
DN 500 EV
DN 650 EV
DN 800 EV
DN 1000 EV
DN 1500 EV
DN 2000 EV
* *
* *
-
8/2/2019 f.sg Dg_sn Dn Ts0022uk01
10/16
Model
SN 250 EV 1700 400 1105
SN 320 EV 1700 400 1200
SN 400 EV 1700 400 1200SN 500 EV 1700 400 1200
SN 650 EV 1700 400 1200
SN 800 EV 1700 400 1200
SN 1000 EV 1900 600 1300
SN 1500 EV 1900 600 1300
SN 2000 EV 1900 600 1300
DN 250 EV 1700 700 1105
DN 320 EV 1700 700 1200
DN 400 EV 1700 700 1200
DN 500 EV 1700 700 1200
DN 650 EV 1700 700 1200DN 800 EV 1700 700 1200
DN 1000 EV 1900 900 1300
DN 1500 EV 1900 900 1300
DN 2000 EV 1900 900 1300
OVERALL DIMENSIONS (mm)
HEAVY OIL HEATING AND PUMPING UNIT SKIDS
Model
SN 250 EP 1400 400 985
SN 320 EP 1400 400 985
SN 400 EP 1500 400 1100SN 500 EP 1500 400 1100
SN 650 EP 1500 400 1100
SN 800 EP 1500 600 1100
SN 1000 EP 1500 600 1100
SN 1500 EP 1500 600 1100
DN 250 EP 1400 700 985
DN 320 EP 1400 700 985
DN 400 EP 1500 700 1100
DN 500 EP 1500 700 1100
DN 650 EP 1500 700 1100
DN 800 EP 1500 900 1100DN 1000 EP 1500 900 1100
DN 1500 EP 1500 900 1100
Electrical heater
C
B
A B C
A B C
C
B
Electrical/steam heater
A
A
-
8/2/2019 f.sg Dg_sn Dn Ts0022uk01
11/16
X
Z
Y
PACKAGING
ModelSN 250 EV 1860 640 1450SN 320 EV 1860 640 1450SN 400 EV 1860 640 1450SN 500 EV 1860 640 1450SN 650 EV 1860 640 1450SN 800 EV 1860 640 1450SN 1000 EV 1995 840 1550SN 1500 EV 1995 840 1550SN 2000 EV 1995 840 1550DN 250 EV 1860 940 1450
DN 320 EV 1860 940 1450DN 400 EV 1860 940 1450DN 500 EV 1860 940 1450DN 650 EV 1860 940 1450DN 800 EV 1860 940 1450DN 1000 EV 1995 1140 1550DN 1500 EV 1995 1140 1550DN 2000 EV 1995 1140 1550
ModelSN 250 EP 1660 640 1450SN 320 EP 1660 640 1450SN 400 EP 1660 640 1450SN 500 EP 1660 640 1450SN 650 EP 1660 640 1450SN 800 EP 1660 840 1450SN 1000 EP 1660 840 1450SN 1500 EP 1660 840 1450
DN 250 EP 1660 940 1450DN 320 EP 1660 940 1450DN 400 EP 1660 940 1450DN 500 EP 1660 940 1450DN 650 EP 1660 940 1450DN 800 EP 1660 1140 1450DN 1000 EP 1660 1140 1450DN 1500 EP 1660 1140 1450
X Y Z
X Y Z
-
8/2/2019 f.sg Dg_sn Dn Ts0022uk01
12/16
HEAVY OIL HEATING AND PUMPING UNIT SKIDS - LIST OF AVAILABLE MODELS
Electrical heat er
Single pumping unit
SN 250 EP SB 3/400/50-3/440/60 230/50-60SN 320 EP SB 3/400/50-3/440/60 230/50-60SN 400 EP SB 3/400/50-3/440/60 230/50-60SN 650 EP SB 3/400/50-3/440/60 230/50-60SN 800 EP SB 3/400/50-3/440/60 230/50-60SN 1000 EP SB 3/400/50-3/440/60 230/50-60SN 1500 EP SB 3/400/50-3/440/60 230/50-60
Electrical/Steam heater
Single pumping unit
SN 250 EV SB 3/400/50-3/440/60 230/50-60SN 320 EV SB 3/400/50-3/440/60 230/50-60SN 400 EV SB 3/400/50-3/440/60 230/50-60SN 500 EV SB 3/400/50-3/440/60 230/50-60SN 650 EV SB 3/400/50-3/440/60 230/50-60SN 800 EV SB 3/400/50-3/440/60 230/50-60SN 1000 EV SB 3/400/50-3/440/60 230/50-60SN 1500 EV SB 3/400/50-3/440/60 230/50-60SN 2000 EV SB 3/400/50-3/440/60 230/50-60
Other versions are available on request.
Heating and pumping un it skids supplied, in function of m odel, for filtering , heating and to pressurizeheavy oil, made up of:- Base in painted steel sheet- Manual shut off valve on the output circuit- Self-cleaning filter (double on the D version)- Gas separator group- Pressure regulator valve of gas separator bottle- Pumping group w ith pressure regulator (doub le on the D version)- Pressure gauge- Electrical heater (on the EP models)- Mixed heating: electrical/steam (on the EV models)- Minim um oil pressure switch- Maximum thermostat- Minim um thermostat- Shunt box- Steam circuit solenoid valve- Temperature probe- Safety valve- Heating cartridge- Drainage valve.
Available accessories to be ordered separately:
- Pumping unit for m ain ring- Autom atic gas separator- Heating cartridge- Line filter- Pressure regulator.
(See accessories section).
HEAVY OIL HEATING AND PUMPING UNIT SKIDS - STATE OF SUPPLY
Double pumping unit
DN 250 EP SB 3/400/50-3/440/60 230/50-60DN 320 EP SB 3/400/50-3/440/60 230/50-60DN 400 EP SB 3/400/50-3/440/60 230/50-60DN 650 EP SB 3/400/50-3/440/60 230/50-60DN 800 EP SB 3/400/50-3/440/60 230/50-60DN 1000 EP SB 3/400/50-3/440/60 230/50-60DN 1500 EP SB 3/400/50-3/440/60 230/50-60
Double pumping unit
DN 250 EV SB 3/400/50-3/440/60 230/50-60DN 320 EV SB 3/400/50-3/440/60 230/50-60DN 400 EV SB 3/400/50-3/440/60 230/50-60DN 500 EV SB 3/400/50-3/440/60 230/50-60DN 650 EV SB 3/400/50-3/440/60 230/50-60DN 800 EV SB 3/400/50-3/440/60 230/50-60DN 1000 EV SB 3/400/50-3/440/60 230/50-60DN 1500 EV SB 3/400/50-3/440/60 230/50-60DN 2000 EV SB 3/400/50-3/440/60 230/50-60
-
8/2/2019 f.sg Dg_sn Dn Ts0022uk01
13/16
SPECIFICATION
Type : 160 - 250 - 320 - 400 - 500 - 650 - 800 - 1000 - 1500 - 2000
Fuel : G Light o ilK KeroseneN Heavy oil
Motorized filter :MF
S
BASIC DESIGNATION
N 500 /M 3 /4 00 /5 0 2 30 /5 0/6 0
EXTENDED DESIGNATION
Heating t ype :EP electrical heatingEV mixed heating: electrical/steamV steam heatingAS superheated w ater heating
Electrical connection :SB Shunt box (standard)SC direct connect ion
Electrical supply : 3/400/50 3/440/60 3/380/603/230/50 3/254/60 3/220/60
Contro l circuit electrical supply :230/50-60Hz 110/50-60 Hz
SB
Series : S single pumping and filtering unitD double pumping and filtering unit
Output meter :CL local meterCI impulses emitter meter
EV
Installation :I internalO external
OPTIONS AVAILABLE ON REQUEST
- --
Emulsion kit :D1 n 1 distributorD2 n 2 distributors
A specific index guides your choice of pum ping un itfrom the various models available in the SG, DG, SNand DN series.
Below is a clear and detailed specification descript ionof the product.
DESIGNATION OF SERIES
I
-
8/2/2019 f.sg Dg_sn Dn Ts0022uk01
14/16
Pumping unit for main ring
ACCESSORIES
HC 100
HC 160
HC 280
100
160
280
Electrical power [W]Type Code
3090620
3090621
3090622
Model
Max viscosity 65 E at 50C
Max viscosity 12 E at 50C
Code
3093220
3093221
3093222
3093223
3093224
3093225
3093226
RG 600
RG 1000
RG 1500
RG 2000
RG 3000
RG 4500
RG 6000
RGS 670
RGS 1000
RGS 1330
RGS 2000
RGS 3000
RGS 4000
In progress
3093227
3093228
3093229
3093230
3093231
Motor speed[rpm]
14001700140017001400170014001700140017001400170014001700
950
1100950
1100950
1100950
1100950
1100950
1100
Electric motorpower [kW]
0,370,430,550,650,750,881,11,271,51,82,22,533,5
0,75
0,881,11,271,51,82,22,533,544,8
Outputat 9 bar [l/h]
600720
100012001500180020002400300036004500540060007200
670
8001000120013301600200024003000360040004800
ConnectionIN/OUT
Rp 1/2
Rp 3/4
Rp 3/4
Rp 3/4
Rp 1
Rp 1
Rp 1
Rp 1
Rp 1
Rp 1
Rp 1 1/4
Rp 1 1/4
Rp 1 1/4
Electrical supplyPh/V/ Hz
3/400/503/440/603/400/503/440/603/400/503/440/603/400/503/440/603/400/503/440/603/400/503/440/603/400/503/440/60
3/400/50
3/440/603/400/503/440/603/400/503/440/603/400/503/440/603/400/503/440/603/400/503/440/60
ConnectionIN/OUT
Type Code
GS 150
GS 250
1 1/2 x 1 3000248
3010012
Max workingdelivery [l/h]
1000
20001 1/2 x 1 1/2
Automatic gas separator
Heating cartridge
-
8/2/2019 f.sg Dg_sn Dn Ts0022uk01
15/16
Motorized filter
in progress
Emulsion kit
in progress
Output meter
in progress
Condensation drainage kit
in progress
Steam pressure regulator
in progress
Minimum ring pressure switch kit
in progress
Pressure regolator
BGH 3/4
BGHG 1
BGHG 1 1/4
Type Max output[l/h]
2000
6000
10000
Code
3090569
3090316
3090852
1 - 4
1 - 4
1 - 4
Setting range[bar]
ConnectionIN / OUT
Rp 3/4
Rp 1
Rp 1 1/4
LOCF 3800
SCOF 2000
SCOF 4000
Cartridge filter 100m (light oil)
Selfcleaning filter 300m
Type
-
80
80 -300
Electrical power[W]
ConnectionIN / OUT
Rp 1
Rp 1 1/2
Rp 1 1/2
Max output[l/ h]
3800
2000
4000
Code
3090236
3000790
3010022
Line filter
LOBV 1/2
LOBV 3/4
LOBV 1
Type CodePort size
Rp 1/2
Rp 3/4
Rp 1
Light oil
HOBV 1/2
HOBV 3/4
HOBV 1HOBV 1 1/4
HOBV 1 1/2
Rp 1/2
Rp 3/4
Rp 1Rp 1 1/4
Rp 1 1/2
Heavy oil
Manual shut off valve
in progress
in progress
in progress
in progress
in progress
in progressin progress
in progress
-
8/2/2019 f.sg Dg_sn Dn Ts0022uk01
16/16
RIELLOS.p.A. - Via degli Alpini, 1 - 37045 LEGNAGO (VR) ItalyTel. ++39.0442630111 - Fax ++39.044221980
Internet: http://www.rielloburners.com - E-mail: [email protected]
Since the Company is constantly engaged in the prod uction im provement, the aesthetic anddimensional features, the technical data, the equip ment and the accessories can be changed.
This document contains confidential and prop rietary inform ation of RIELLO S.p.A.
Lineagrafica