Office Fit-out Services

MEPFS Design Project Management

Construction Management Testing & Commissioning Management

2/F Prince Building, 117 Rada Street, Legaspi Village, Makati City, Philippines 1229 T: +632 310 5130 F: +632 310 5134 E: raymund.lee@forsspac.com Skype: dodjie.lee www.forsspacglobal.com

P a g e | 1

Table of Contents

1. Foreword

2. MEPFS Design

3. Project Management

4. Construction Management

5. Testing & Commissioning

6. Past Projects

7. Testimonials

P a g e | 2

1. Foreword

Forsspac has developed the concept of an end-to-end solution which starts with the

clients needs and ends with the handover of the completed project ready to occupy.

Key advantage being that the client has one point of contact for delivery of the project

once the architectural and interior designs have been completed.

2. MEPFS Design

Our design team is focused on producing designs that are fully coordinated

technically and spatially with the building structure including pre-installed MEPF

systems, architectural and interior designs.

This approaches saves time and money by giving certainty to the contractors about

what needs to be constructed/installed and by when.

In addition to MEPFS design Forsspac has the capability to undertake the

Architectural and interior designs working from client corporate style and brand

requirements.

3. Project Management

Project management requires detail focus on the needs of the project which must be

converted into a detailed project management plan that is clear and concise.

The project management plan must deal with the issues of master planning and

budgetary control, provide simple and easy to drive procedures for getting the job

done that all players can access, understand and deliver against.

P a g e | 3

4. Construction Management

Construction management requires a team of dedicated and experienced staff to be

deployed to site to oversee all aspects of the work carried out by the contractors.

The site team must drive the works to hit the master plan milestone dates whilst at

the same time ensuring that the construction works conform to design intent and are

executed to the agreed quality level.

When selecting a team we look at the project needs and draw upon our engineering

and testing & commissioning staff pools to assemble the right team for the job.

5. Testing & Commissioning Management (T&CM)

Before installation works get underway it is important to plan how the testing &

commissioning of the systems will be carried out.

A detailed T&CM plan is produced based upon the project master plan that sets out

by when all tests are to be completed by. A key activity is to make sure that the

methods to be used by the contractors when carrying out their testing &

commissioning will deliver fully working systems.

As testing & commissioning managers Forsspac make sure that the end result is in

line with client requirements. This includes our site-based engineers overseeing the

contractors testing, collation of all test reports & final sign off, production of

operations & maintenance manuals and the training of the client staff in facility

operations.

P a g e | 4

6. Past Projects

Project Name: Neilsen Office Fit-Out Client: Interics Asia Project Description: The project involves office renovation fit-out

works for levels 24, 25 and 29 floors Location: Ortigas Center, Pasig City Services Provided: PM-CM, A&E Design Services and Testing and

Commissioning CFA: 3,438sqm No. of Storeys: 3 floors

Project Name: Cisco Manila Office Fit-Out and Refurbishment

Client: CBRE

Project Description: Forsspac provided MEPF Design Consultancy Services for the combined fit-out and refurbishment project

Location: SM Aura Premiere, Bonifacio High Street, Taguig City

Services Provided: MEPF Design Services CFA: 1,102 sqm

P a g e | 5

Project Name: Convergys BPO Office Fit Out Client: Convergys Project Description: Convergys will occupy over 180,000

square feet on four floors within the SM Megamall, one of the largest shopping centers in the world. This is an ideal location, where employees can benefit from the convenience of being at the epicenter of activity in the city.

Location: Mandaluyong City Services Provided: MEPF Design Services CFA: 14,000sqm No. of Storeys: 11 storey building

P a g e | 6

Project Name: Ericsson Office Fit Out Client: JLL Philippines

Project Description: Ericsson will build out approximately 1,200 sqm office space at a new site located at 5th floor of The JMT

Location: Pasig City Services Provided: MEPF Design Services CFA: 1,200 sqm No. of Storeys: 11 storey building

Project Name: IHOP Restaurant Fit-Out Client: DQA

Project Description: Forsspac was engaged to design Mechanical, Electrical, Plumbing and Fire Protection discipline for the multiple branches of Ihop in the Philippines.

Location: Multiple Branches Services Provided: MEPF Design Services CFA: 186.46 sqm

P a g e | 7

7. Testimonials

PM/CM & Design Services: Nielsen Wynsum Corporate Plaza Office Fit-out Project “Forsspac leaded by Rey De Ocampo, has provided Project Management services for our office relocation for Manila, Philippines. During the project, from planning stage to hand over stage, Forsspac has demonstrated a professional management service with us. The project had several challenges along the way, with very tight deadlines and availability of resources, Forsspac was able to resolve and had turned over the project on the given deadlines. With such professional services provided, we are very much happy on the results and we can unhesitatingly recommend Forsspac based on the services provided with us.” Mary Sheryl B. Dolatre, Area Operations Manager, SEANAP Facilities Management, The Nielsen Company Philippines Inc.

MEPF and Testing and Commissioning: Midas “Professional, dedicated, solution providers, cost aware on behalf of owner, always deliver. These are just some of the attributes I can endorse for the management and engineering teams at Forsspac. MEPF Design consultancy specialists and Testing and Commissioning professional engineering teams continue working with us on high end complex projects here in the Philippines. I can recommend the Forsspac group for any project, big or small here in the Philippines. They will be a valued addition to any team of consultants.” Cecilia Ravelas, Project Director, D’Consult International Incorporated

MEPF Design: Rockwell Retail Centre Project “Rockwell Retail Centre Project “Phil Thoburn, member of the Rockwell Team that achieved the impossible! With Sincere thanks for your personal contribution and that of FPC.” Peter Gomm, Country Manager, Leighton Philippines

Visit www.forsspacglobal.com for more