for architects, specifiers & designers · 2019-10-31 · Port Melbourne, VIC 3207 Telephone: (03)...

6
for architects, specifiers & designers premium plywood for decorative applications www.forest1.com

Transcript of for architects, specifiers & designers · 2019-10-31 · Port Melbourne, VIC 3207 Telephone: (03)...

Page 1: for architects, specifiers & designers · 2019-10-31 · Port Melbourne, VIC 3207 Telephone: (03) 9647 9930 Facsimile: (03) 9647 9991 Distribution Centre 58 Parkwest Drive, Parkwest

for architects, specifiers & designers

premium plywood for decorative applications

www.forest1.com

Page 2: for architects, specifiers & designers · 2019-10-31 · Port Melbourne, VIC 3207 Telephone: (03) 9647 9930 Facsimile: (03) 9647 9991 Distribution Centre 58 Parkwest Drive, Parkwest

DesignerPly is a decorative range of plywood specially se-lected to create a visual impact - from wall panelling, joinery and ceiling panels. The DesignerPly range offers an extensive range of products for many applications, with clear and feature veneers to pre-finished Powder Coated surfaces to achieve your desired designs.

Decorative solutions

Choosing the best DesignerPly for your next project will be dependent on the application and the visual im-pact you are wanting to achieve.

DesignerPly Marine for clear, light col-oured finishes where an external grade glue bond is required. Also suitable for staining or powder coating to add col-our. DesignerPly Birch and DesignerPly Hoop Pine are suitable to achieve a clear, light coloured finish. Suitable for staining or powder coating for durability and colour.

For ceiling linings where weight may be of importance our light-weight Desig-nerPly eLite can be used. Where a tough surface is required, for high volume wear and tear areas or under external eaves, DesignerPly Powder Coated surfaces in either a Clear or Limed finish, will be suitable. By specifying a pre-finished panel, powder coating reduces on-site installation time with no VOC emissions. DesignerPly Acoustic plywood can be cut to your specific designs giving a unique and practical panel to achieve creative designs and end results. Our Gunnersen representatives can as-sist with expert advise to make the specification process simple.

Certification Gunnersen holds Chain of Custody under the AFCS, PEFC and FSC forest certification schemes. Please contact your nearest branch to discuss our ability to source and supply certified, plywood products from our global network of producers.

Benefits Renewable Resource - A natural product from a renewable resource. Beautiful - Preferred because of its warmth and natural grain patterns. Strength - Unique cross-layered structure makes it kilo for kilo, stronger than steel.

Efficiency Uses more of the log than timber.

Versatility Can be bent and formed to meet various sizes and shapes.

Durability Long-lasting and good resistance to damage.

for design & architecturePremium Plywood

DESIGNERPLY DECORATIVE PLYWOOD

Page 3: for architects, specifiers & designers · 2019-10-31 · Port Melbourne, VIC 3207 Telephone: (03) 9647 9930 Facsimile: (03) 9647 9991 Distribution Centre 58 Parkwest Drive, Parkwest

DesignerPly Marine DesignerPly Birch DesignerPly Hoop DesignerPly Powder Coated DesignerPly eLite DesignerPly Acoustic

FRONT COVER Eleven Inch Docklands, Victoria Design: Zwei Photography: Michael Kai

INSIDE FRONT COVER Perth Arena Western Australia

Page 4: for architects, specifiers & designers · 2019-10-31 · Port Melbourne, VIC 3207 Telephone: (03) 9647 9930 Facsimile: (03) 9647 9991 Distribution Centre 58 Parkwest Drive, Parkwest

ABOVE RIGHT Surf Coast Second-

ary College Torquay, Victoria

DesignerPly Clear Powder Coated (cut to size) panels were used ex-tensively for all joinery throughout

the entire school.

ABOVE LEFT Fountain Gate Shopping Centre

Melbourne, Victoria DesignerPly Lime Wash Powder Coated panels fitted

as external eaves at the entrance to the centre. Photography: Danielle Benson Photography

TOP LEFT Ruyton Girls’ School Melbourne, Victoria DesignerPly Clear Powder Coated panels were used in the transformation of this learning space – the staircase, acoustic panels for the ceiling and for feature cabi-netry including the kitchen and lockers. Photography: Danielle Benson Photogra-phy

TOP RIGHT Jamie Oliver’s Ministry of Food Centre Ipswich, Queensland DesignerPly was selected for it’s appearance and environ-mental credentials for the extractor fan covers and for shelving.

for architects, specifiers & designersProject Applications

Page 5: for architects, specifiers & designers · 2019-10-31 · Port Melbourne, VIC 3207 Telephone: (03) 9647 9930 Facsimile: (03) 9647 9991 Distribution Centre 58 Parkwest Drive, Parkwest

Highpoint Shopping Centre Melbourne, Victoria

Plywood battens were used as a feature on the ceiling creating a meandering visual effect,

drawing the eye down the length of the centre.

DESIGNERPLY DECORATIVE PLYWOOD

Page 6: for architects, specifiers & designers · 2019-10-31 · Port Melbourne, VIC 3207 Telephone: (03) 9647 9930 Facsimile: (03) 9647 9991 Distribution Centre 58 Parkwest Drive, Parkwest

VICTORIA

Melbourne

Head Office and Sales: 112 Salmon Street, Port Melbourne, VIC 3207 Telephone: (03) 9647 9930 Facsimile: (03) 9647 9991

Distribution Centre

58 Parkwest Drive, Parkwest Estate Derrimut, VIC 3030

NEW SOUTH WALES

Sydney

17-19 McKay Close, Wetherill Park, NSW 2164 Telephone: (02) 9757 6999 Facsimile: (02) 9757 3935

SOUTH AUSTRALIA

Adelaide

5 Johansson Road, Wingfield, SA 5013 Telephone: (08) 8359 1660 Facsimile: (08) 8359 1669

QUEENSLAND

Brisbane

186 Boundary Road West, Rocklea, QLD 4106 Telephone: (07) 3722 3500 Facsimile: (07) 3277 3827

Townsville

Unit 2, 207 Dalrymple Road, Garbutt, QLD 4814 Telephone: (07) 4779 0877 Facsimile: (07) 4779 3245

Cairns

303 Little Spence Street, Cairns, QLD 4870 Telephone: (07) 4035 3955 Facsimile: (07) 4035 3950

WESTERN AUSTRALIA

Perth

79-83 Pilbara Street, Welshpool, WA 6106 Telephone: (08) 9356 9911 Facsimile: (08) 9356 9922

DECORATIVE PLYWOOD FROM FORESTONE