FOOD & LIFE SCIENCE INSTRUMENTS - Industrial Supplier

INSTRUMENTSMeasuring your world since 1965™

®

FOOD & LIFE SCIENCE INSTRUMENTS

Measuring your world since 1965™ FLSLC-1016

Measuring your world since 1965™

Product STD ExpediteRTD Assemblies 5-7 Days 1 Day

Digital Thermometer 5-7 Days 1 DayBimetal Thermometers 3-5 Days 1 Day

Diaphragm Seals 5 Days Same DayPressure Gauges 5 Days Same Day

ReoClick™/Slimline™ 10 Days 3 DaysReoCube™ 10 Days 3 Days

Thermowells 1-10 Days Same Day

Fast Standard Lead Times Expedites Available

Exceptional Customer SupportDirect access to our friendly and knowledgeable regional sales teams, product managers, engineers, and product specialists. No phone trees, no frustration.

Hi-Accuracy™ is an optional feature on many of our RTD sensors. REOTEMP uses high-end fixed point calibration cells to determine precise coefficients for the sensor you purchase. You will later input these values into your transmitter. Once the precision coefficients are entered, your sensor will be roughly 5 times more accurate!

Hi-Vibe™ is an optional feature on many of our RTD sensors. It’s a proprietary sensor design that significantly improves lifespan and helps to maintain calibration in high vibration environments.

WHY REOTEMP?

™

™Hi-Accuracy

5-7DAY

1

1

2

2

3

3

4

4

A A

B B

C C

D D

CUSTOMER'S NAME:

CUSTOMER'S P.O. NO.:

CERTIFIED BY: DATE:

PART NO:

FIRST USED ON:

SIZE:

C

SCALE:

24793CAGE CODE: DWG NO:

FILE NAME: SHEET OF

REV:

APPROVED:

MNeillDRAWN BY:

DATE:UNLESS OTHERWISE SPECIFIEDDIMENSIONS ARE IN INCHES & [mm]TOLERANCES ARE: FRACTIONS DECIMALS ANGLES

±1/32 .X ± .2 ±5 .XX ± .01 .XXX ± .005 SURFACE FINISH

PART NAME:

REOTEMP Instrument Corporation10656 Roselle Street

San Diego, CA 92121 USAPhone: (858) 784-0710Fax: (858) 784-0720

THIS DRAWING AND SPECIFICATIONS ARE THE PROPERTY OF REOTEMP INSTRUMENT CORP., AND ARE ISSUED IN STRICT CONFIDENCE AND SHALL NOT BE REPRODUCED, COPIED OR USED AS THE BASIS FOR MANUFACTURE OR SALE OF ITEMS DEPICTED HEREIN WITHOUT WRITTEN PERMISSION FROM REOTEMP INSTRUMENT CORP.

REV DESCRIPTION

REVISIONS

DATE APPROVED

5" ADJUSTABLE ANGLE W/ RESET,1/2" NPT, Ø1/4" x 6" STEM

AJJ0601

NTS 1 1

8/28/15

A INITIAL RELEASE 8/28/15

63

REOTEMP ORDER NO.:

NOTE 1

NOTE 2

NOTE 3

NOTE 4

NOTE 5

3rd ANGLE PROJECTION

5.0 [127]

2.4 [61]

6.0 [152]

1/2" NPT

.875" FLAT TO FLAT

3.0 [75]

.3 [7]

.25 [6.4]

RESET SCREW

™

™

The Hi-Vis™ dial is an optional feature on REOTEMP pressure and temperature gauges. Hi-Vis dials can improve safety by increasing the visibility of dial gauges in low-light environments and from a distance. It can also be used to highlight critical process lines or dangerous areas.

REOTEMP’s proprietary diaphragm seal feature, Pulse Plus™ dramatically reduces the effects of pulsation on mechanical pressure gauges. It increases gauge lifespan and improves safety.

REOTEMP is a globally recognized ISO 9001:2008 registered company that has been manufacturing in the USA since 1965.

Online Product ConfiguratorsOur online product configurators are powerful tools that make specifying temperature and pressure instrumentation quick & easy. Create part numbers, see list pricing, & generate custom engineering drawings in seconds.

FLSLC-1016

SANITARY SLIMLINE™

REOTEMP’s SlimLine™ Sanitary Temperature sensor is a compact, rugged sensor perfectly suited to applications where space is limited. Available with or without a transmitter, the fully sealed design keeps out any water, liquids, or contaminants. It’s perfect for applications where the sensor is exposed to the elements or equipment is washed down.

• Minimal Installation Space Required

• High Vibration & Shock Resistance

• Hermetically Sealed (NEMA 7, IP67)

• All-Welded 316SS Construction

REOCLICK™

• Disconnect and re-connect the temperature sensor with the click of a button.• Sealed sensor can be placed directly in a calibration bath.• Maintains process pressure when disconnected.

Patent Pending

CLICK

M12 Connector vs. Wire OutThe M12 Plug allows you to quickly and easily connect process wiring. REOTEMP offers a choice of the mating connector with or without attached wiring.

Sealed Cable assemblies allow you to wire directly to your PLC or transmitter. These units come standard with a nylon relief spring for added protection of the extension wires.

Measuring your world since 1965™ Measuring your world since 1965™

1

1

2

2

3

3

4

4

A A

B B

C C

D D

CUSTOMER'S NAME:


CERTIFIED BY: DATE:

PART NO:

FIRST USED ON:

SIZE:

C

SCALE:


FILE NAME: SHEET OF

REV:

APPROVED:

MNeillDRAWN BY:



PART NAME:




REV DESCRIPTION

REVISIONS

DATE APPROVED

RDP - M12 PLUG

X1 40011

NTS 1 1

6/10/16

X1 INITIAL RELEASE 6/10/16

63

REOTEMP ORDER NO.:

NOTE 1

NOTE 2

NOTE 3

NOTE 4

NOTE 5

3rd ANGLE PROJECTION1

1

2

2

3

3

4

4

A A

B B

C C

D D

CUSTOMER'S NAME:


CERTIFIED BY: DATE:

PART NO:

FIRST USED ON:

SIZE:

C

SCALE:


FILE NAME: SHEET OF

REV:

APPROVED:

MNeillDRAWN BY:



PART NAME:




REV DESCRIPTION

REVISIONS

DATE APPROVED

RTP - 4-20 mA TRANSMITTER WITHM12 QUICK-CONNECT PLUG

X1 40012

NTS 1 1

6/10/16


63

REOTEMP ORDER NO.:

NOTE 1

NOTE 2

NOTE 3

NOTE 4

NOTE 5


1

1

2

2

3

3

4

4

A A

B B

C C

D D

CUSTOMER'S NAME:


CERTIFIED BY: DATE:

PART NO:

FIRST USED ON:

SIZE:

C

SCALE:


FILE NAME: SHEET OF

REV:

APPROVED:

MNeillDRAWN BY:



PART NAME:




REV DESCRIPTION

REVISIONS

DATE APPROVED

RCP - REO-CLICK REMOVABLEELEMENT WITH M12 PLUG

X1 40013

NTS 1 1

6/10/16


63

REOTEMP ORDER NO.:

NOTE 1

NOTE 2

NOTE 3

NOTE 4

NOTE 5


1

1

2

2

3

3

4

4

A A

B B

C C

D D

CUSTOMER'S NAME:


CERTIFIED BY: DATE:

PART NO:

FIRST USED ON:

SIZE:

C

SCALE:


FILE NAME: SHEET OF

REV:

APPROVED:

MNeillDRAWN BY:



PART NAME:




REV DESCRIPTION

REVISIONS

DATE APPROVED

RDW - SEALED CABLE

X1 40014

NTS 1 1

6/10/16


63

REOTEMP ORDER NO.:

NOTE 1

NOTE 2

NOTE 3

NOTE 4

NOTE 5


1

1

2

2

3

3

4

4

A A

B B

C C

D D

CUSTOMER'S NAME:


CERTIFIED BY: DATE:

PART NO:

FIRST USED ON:

SIZE:

C

SCALE:


FILE NAME: SHEET OF

REV:

APPROVED:

MNeillDRAWN BY:



PART NAME:




REV DESCRIPTION

REVISIONS

DATE APPROVED

RTW - 4-20 mA TRANSMITTER WITHSEALED CABLE

X1 40015

NTS 1 1

6/10/16


63

REOTEMP ORDER NO.:

NOTE 1

NOTE 2

NOTE 3

NOTE 4

NOTE 5


1

1

2

2

3

3

4

4

A A

B B

C C

D D

CUSTOMER'S NAME:


CERTIFIED BY: DATE:

PART NO:

FIRST USED ON:

SIZE:

C

SCALE:


FILE NAME: SHEET OF

REV:

APPROVED:

MNeillDRAWN BY:



PART NAME:




REV DESCRIPTION

REVISIONS

DATE APPROVED

RCW - REO-CLICK REMOVABLEELEMENT WITH SEALED CABLE

X1 40016

NTS 1 1

6/10/16


63

REOTEMP ORDER NO.:

NOTE 1

NOTE 2

NOTE 3

NOTE 4

NOTE 5


RCP REOCLICK Removable element

with M12 Plug

RCW REOCLICK Removable element with Sealed Cable

RDW Sealed Cable with Ohm Output

RTW 4-20 mA Transmitter with Sealed Cable

RTP 4-20 mA Transmitter with M12 Quick Connect Plug

RDP with M12 Quick Connect Plug with

Ohm Output

Sealed Cable M12 Connector

4-20 mA

4-20 mA

FLSLC-1016

1

1

2

2

3

3

4

4

A A

B B

C C

D D

DRAWN BY

DATEUNLESS OTHERWISE SPECIFIEDDIMENSIONS ARE IN INCHESTOLERANCES ARE: FRACTIONS DECIMALS ANGLES

±1/32 .X ± .03 ±5 .XX ±.01 .XXX ±.005

PART NO

FIRST USED ON

APPROVED

SIZEC

SCALE:

CAGE CODE

24793

REOTEMP



DWG NO REV

FILE NAME:

PART NAME

LGibbs

SHEET OF

DESCRIPTION

REVISIONS

APPROVEDDATEREV

SANITARY 1.5 in TRICLAMP - SHORTENED 3D

6/17/16

NTS

40017

1 1


X1

THIS DRAWING AND SPECIFICATIONS ARE THE PROPERTY OF REOTEMP INSTRUMENT CORP., AND ARE ISSUED IN STRICT CONFIDENCE AND SHALL NOT BE REPRODUCED, COPIED OR USED AS THE BASIS FOR MANUFACTURE OR SALE OF ITEMS DEPICTED HEREIN WITHOUT WRITTEN PERMISSION FROM REOTEMP INSTRUMENT CORP. NOTES (UNLESS OTHERWISE SPECIFIED)1) DIMENSIONS ARE IN INCHES2) BEST COMMERCIAL MANUFACTURING PRACTICES APPLY, UNLESS OTHERWISE SPECIFIED.3) PART TO BE FREE OF OILS AND BURRS4) MATERIAL:

™

™Hi-Accuracy5-7DAY

Certified

• Ideal for CIP (clean-in-place) or SIP

• All Wetted Parts Highly Polished to Exceed 3-A Requirements

• Tri-Clamp® Design

• 3-A Certificate Included with Each Product

RTD HEAD ASSEMBLIES

CUSTOM SOLUTIONS

Transmitters (HART, Profibus, Fieldbus or 4-20mA)


ReoCube™

REOTEMP’s ReoCube™ Isolation Bottles were developed to monitor the temperature of ultra low freezers or refrigerators. By submerging the temperature sensor(s) in liquid, the ReoCube™ ensures the temperature readings will not be thrown off when the freezer door is opened and ambient air rushes in.

Ultra-thin Cryogenic Flexible ProbeA Biotech customer required a probe with an extremely small diameter (0.050”), nearly instant response time and a flexible stem to monitor skin graft tissue in a cryogenic environment. Previous competitive probes were not flexible enough and damaged the temperature element. REOTEMP’s engineering team designed a new probe within 3 weeks and with nearly instant response times.

Standard 1/4” StemMini-Stem

Fast ResponseReduced Tip

Stem

“The probes were outstanding! I had excellent results in the first run with your newly designed probe! - Manufacturing Support Engineer

1

1

2

2

3

3

4

4

A A

B B

C C

D D

DRAWN BY


±1/32 .X ± .03 ±5 .XX ±.01 .XXX ±.005

PART NO

FIRST USED ON

APPROVED

SIZEC

SCALE:

CAGE CODE

24793

REOTEMP



DWG NO REV

FILE NAME:

PART NAME

LGibbs

SHEET OF

DESCRIPTION

REVISIONS

APPROVEDDATEREV

SANITARY 1.5 in TRICLAMP - SHORTENED - HEADLESS

6/17/16

NTS

40018

1 1


X1


1

1

2

2

3

3

4

4

A A

B B

C C

D D

DRAWN BY


±1/32 .X ± .03 ±5 .XX ±.01 .XXX ±.005

PART NO

FIRST USED ON

APPROVED

SIZEC

SCALE:

CAGE CODE

24793

REOTEMP



DWG NO REV

FILE NAME:

PART NAME

LGibbs

SHEET OF

DESCRIPTION

REVISIONS

APPROVEDDATEREV

SANITARY .75 in TRICLAMP - SHORTENED - HEADLESS

6/17/16

RHS-T75A030-AS3

NTS

40019

1 1


X1


1

1

2

2

3

3

4

4

A A

B B

C C

D D

DRAWN BY


±1/32 .X ± .03 ±5 .XX ±.01 .XXX ±.005

PART NO

FIRST USED ON

APPROVED

SIZEC

SCALE:

CAGE CODE

24793

REOTEMP



DWG NO REV

FILE NAME:

PART NAME

LGibbs

SHEET OF

DESCRIPTION

REVISIONS

APPROVEDDATEREV

SANITARY 1.5 in TRICLAMP - SHORTENED & REDUCED STEM

6/17/16

RHS-T15E060-AS3

NTS

40020

1 1


X1


RTD Head Assemblies Offer a Variety of Stem and Termination Options

REOTEMP’s Sanitary RTDs are designed for temperature sensing in pharmaceutical, biotech, food, dairy, beverage and other applications where sensor corrosion and product contamination are critical factors.

FLSLC-1016

Certificate Included

THERMOWELLS• Remove an Instrument

without Dropping Pressure or Losing the Contents of the Process

• Recommended for Pressurized Systems

• Easy-to-clean Ra 32 or Better Surface Finish

• Customizable to Your Process with a Variety of Stem, Bore and Material Options


SANITARY THERMOMETERS

PRESSURE TRANSMITTER & SWITCH

SANITARY PRESSURE

• Local Display with Switching Output and Analog Output (mA or Vdc)

• 316 Stainless Steel Wetted Parts

• Available with or without Sanitary Tri-Clamp Fitting

• M12 Quick Connector Plug

Color Band Color Pie Custom Logo

TRANSMITTER SEAL ASSEMBLIES

REOTEMP can assemble a diaphragm seal system to virtually any make or model transmitter. Every transmitter mount includes features to ensure superior performance

and durability for every assembly. REOTEMP also offers repair, refurbishment or replacement of used transmitters with remote seals.

DIAL CUSTOMIZATION

Fillable Custom LogoCertified Dials

™

Fillable Custom LogoCertified Dials

™

Order Diaphragm Seal Assemblies from the Experts at REOTEMP

• Specifically Designed to Exceed Demanding 3-A Requirements

• All Welded 316SS Tube, Socket, Seal and Diaphragm

• Ideal for Clean-in-Place or Equipment Washdown

• Models Available for Autoclaving and Pulsation Service

IP67 Washdown Cover Option

Availalbe on mechanical temperature and pressure gauges.

4-20mA Output Available

FLSLC-1016

REOTEMP uses a combination of fixed point temperature calibration cells and fluid-filled calibration equipment to perform temperature calibrations from -321°F to 2,372°F (-196°C to 1,300°C). REOTEMP also offers pressure calibrations from inches of water up to 30,000 psi. Our friendly and knowledgeable calibration technicians will ensure your instruments have the accuracy required for your application.

• NIST-traceable Calibration Certificates• 3-A Certificates and Material Traceability• Mill Test Reports and PMI

Headquarters

HoustonBranch

PhoneFaxEmailWeb

Distributed by:

10656 Roselle St.San Diego, CA 92121

8787 West Road Suite 140Houston, TX 77064

+1 (858) 784-0710+1 (858) [email protected]

CALIBRATION & CERTIFICATION SERVICES

REOTEMP’s Sanitary Diaphragm Seals are ideal for applications in the food and beverage, dairy, and pharmaceutical industries. REOTEMP will mount and fill a variety of instruments to sanitary seals including Digital Pressure Gauges, Transmitters, and Switches. All Sanitary Diaphragm Seal Assemblies manufactured by REOTEMP are 3-A Certified.

SANITARY DIAPHRAGM SEALS

Measuring your world since 1965™

HAND HELD TEMPERATURE PROBEREOTEMP’s Hand Held Multi-purpose Thermometer is a high accuracy thermometer used to spot

check various process media commonly found in the brewing and food & beverage industries. It has a rugged all stainless steel construction and a built-in handle for ease of handling and extra protection.

• Easy to Read 4 Digit LCD Display• High Accuracy Class A RTD (0.06%)• Water Resistant IP67/NEMA 4X• Stem Lengths 24” to Over 96”• -328°F to 1112°F (-200°C to 600°C)• Fast Response Stem

FLSLC-1016

FOOD & LIFE SCIENCE INSTRUMENTS - Industrial Supplier

Documents

Transcript of FOOD & LIFE SCIENCE INSTRUMENTS - Industrial Supplier