ELECTRICAL & Portable Appliance Testers INDUSTRIAL INSTRUMENTS · 2019-04-05 · INSTRUMENTS 2016...
Transcript of ELECTRICAL & Portable Appliance Testers INDUSTRIAL INSTRUMENTS · 2019-04-05 · INSTRUMENTS 2016...
www.emona.com.au
Portable Appliance TestersInstallation TestingSolar PV TestingThermal ImagingMultimetersClamp MetersMultiMeasure HandheldsData & Telecoms TestingCable LocatingHigh Voltage TestingPower Quality AnalysersHandheld OscilloscopesCalibratorsCalibration Services
ELECTRICAL & INDUSTRIAL
INSTRUMENTS 2016 SHORT FORM
Dear Customer,
Welcome to Emona’s 2015 Electrical and Industrial Instruments shortform.
The new 2015 shortform matches the productcategories in our www.emona.com.au website. You can also refer to our website for: • product specifications and detailed brochures • product demonstration and training videos• software and firmware updates under the SUPPORT tab• calibration information and booking form under the CALIBRATION tab
Ordering
You can place orders on-line via our website at www.emona.com.au, or order via email, telephone or fax to your local Emona office. Payment by Mastercard, Visa and American Express is accepted. Account terms are available and subject to approval. Emona’s Standard Terms & Conditions apply.
Technical Support
Emona’s technical support and sales staff are ready to help you with your measurement needs and solutions. Our sales engineers are technically trained to support our wide range of instruments and equipment. For more information contact your Emona office or call toll free 1 800 632 953.
About Emona
Established in 1979, Emona Instruments has grown to become a leading supplier of electrical and electronic test and measuring instruments. With offices around Australia, AS/NZS ISO 9001-2008 Quality Management Requirements accreditaion, NATA traceable calibration facilities and technically qualified sales staff, you can rely on Emona for your instrumentation requirements.
Welcome
SECTION PRODUCT GROUP PAGE
i Catalogue Index i
1Portable Appliance Testers
1
2 Installation Testing 6
3 Solar PV Testing 10
4 Thermal Imaging 11
5 Multimeters 12
6 Clamp Meters 14
7MultiMeasure Handheld Instuments
16
8Data & Telecoms Testing
20
9 Cable Locating Testers 22
10 High Voltage Testing 23
11Power Quality Analysers
24
12 Handheld Oscilloscopes 26
13 Calibrators 27
14 Calibration Services 29
i • EMONA Instruments • • NSW Tel 9519 3933 • VIC Tel 9889 0427 • QLD Tel 3392 7170
Product Demonstration & Training Videos
Look for the VIDEO icon for products that have demonstration and training videos available. Just go to www.emona.com.au, click the VIDEOS tab at the top of the page and browse our selection of videos.
• Low Cost with Power Up/Leakage• Simple 3 Button Operation
Australia's lowest cost and easiest touse appliance tester!
Simple select one of 3 push buttons,for Class I test, Class II test andleakage test. The unit also includes amains voltage outlet voltage check toensure socket outlet safety.
Test your Class I & II appliances,extension leads and powerboardswith confidence.
PRIMETEST 125 EL Features• Tests conducted: earth continuity,
insulation resistance, leakage/powerup, polarity & mains outlet check
• Battery powered• Pass/Fail indication and readings• Test sequences for faster testing• Class I, Class II & LKG buttons • Tests leads and powerboards
• Australia’s Lowest Cost LoggingAppliance & RCD Tester
The Seaward PAC3760 DL is based onthe PAC3760 series, Australia’s mostpopular and easiest to use appliancetesters. The new PAC3760 DL nowincludes even more useful features atthe same affordable price.
The PAC3760 DL includes on-boardmemory of 999 test results,eleminating the need for writing logbooks. Conduct the test and press theSAVE button to store the result. Testresults can be downloaded via USB asa CSV file that can be opened by anyspreadsheet or database program.
PAC3760 DL Features• Tests conducted: earth continuity,
insulation resistance, Class I andClass II leakage current, MOV Class Iand Class II leakage current, polarity
• 10mA & 30mA RCD trip time tests• In-built isolation transformer• Memory 999 test results• Simple 9 push button operation• Battery & mains powered• Pass/Fail indication and readings• Senses an IEC or extension lead and
conducts a polarity test• 3 phase insulation & leakage tests
using optional PAC-TPL 3 phaseadaptor
• In-Built Keypad Eliminates the Needfor Tablets or PCs for Data Logging
The Primetest 300 is Australia’s lowestcost appliance tester with full keypad,eliminating the need for a tablet fordata entry. It weighs less than 1kg, isbattery powered and incorporatesBluetooth technology.
The PrimeTest 300 is an ideal entrylevel tester for users looking atlogging appliance and RCD testingsystems bundled with reportingprofessional software. Ideal for smallto medium size organisations orservice providers starting out, thePT300 PRO System offers the bestprice to performance.
PRIMETEST 300 Features• Tests conducted: earth continuity,
insulation resistance, Class I andClass II leakage current, MOV Class Iand Class II leakage current, polarity
• 30mA RCD trip time tests• Memory 8,000 test results• Battery powered• Pass/Fail indication and readings• Bluetooth interface for downloading
test results to PC, and optional barcode scanner and tag printer
• User defined data logging for anytype of test, inspection or riskassessment eliminates the need fortablet or smartphone for data input
• Includes Seaward PATGuard PROasset management software
Ordering Code:PT300 PRO KIT $2,299 ex GST
PT300 ProSeaward
Ordering Code:PRIMETEST 125 EL $599 ex GST
Ordering Code:PAC3760 DL $1,049 ex GST
PAC3760 DLSeaward
PrimeTest 125 ELSeaward
BASIC APPLIANCETESTERS
SECTION INDEXBasic Appliance TestersTest Tags & Log BookTag Printing Appliance TestersThree Phase AdaptorsRCD Testers & Isolation TransformerMicrowave Leakage TesterAccessories
Portable Appliance Testers1
• SA Tel 8363 5733 • WA Tel 9361 4200 TOLL FREE 1800 632 953 • EMONA Instruments • 1
• For AS/NZS3760 Applications• Custom Tags with Your Own Logo
Also Available
•ST-002•• Adhesive backed high quality vinyl• With clear laminated layer of heavy
duty polypropylene for written dataarea
• Guaranteed weather and tamperproof
• Available in: Red, Blue, Orange,Green, White, Yellow and Mixed (4Test Colours) & Danger type
• 100 tags per pack.• With permanent marker pen• Custom tags with your logo
available, min -+order 2,000 tags.
• Record your Testing & Tagging
Log Books are designed for easyrecording of Test Results. Plasticcovered for extra protection, theyfeature 100 pages for recordingdetails of appliances and test data.
• Australia’s Lowest Price LoggingTester with Test Tag Printing
The ProTag PAC3760 DL Kit isAustralia’s lowest price loggingappliance tester and test tag printerpackage. The ProTag PAC3760 DL Kitincludes the PAC3760 DL and PAC-OPT test tag printer.
The PAC-OPT's unique "Plug N Print"operation simply requires connectionto the PAC3760 DL via serial cable,conduct your test and press the printbutton to output your test tag. Notime consuming logo set-uprequired as the PAC-OPT prints ageneric test tag.
PROTAG PAC3760 DL Features• Includes PAC3760 DL appliance
tester and PAC-OPT test tag printer• Simple “Plug N Print” operation• Printer automatically prints FAIL tag• Tags printed with tag number, test
date and test result• Printer interface via seria cable• Test tags type is OPT with 250 test
tags per roll
• Australia’s Best Value Test & TagSystem With Asset Management
The ProTag Optima II Kit is Australia’sbest value logging appliance testerand test tag printer package forprofessional applications requiring anasset register. The ProTag Optima IIkit includes the PrimeTest 300 andOptima II test tag printer
The Optima II printer is customisedwith downloading of your corporatelogo or graphics prior to despatch.
The ProTag Optima II Kit is suppliedwith user training (conditions apply),guaranteeing the best value in yourtest and tag investment.
PROTAG OPTIMA II Features• Includes PrimeTest 300 appliance
tester and Optima II test tag printer• Printer automatically prints FAIL tag• Tags printed with asset number, test
date, user name and test result• Printer interface via Bluetooth• Test tags type is OPT with 250 test
tags per roll
Test Tags Ordering Codes:OPT YELLOW Tag Roll $29 ex GSTOPT-WHITE Tag Roll $29 ex GSTOPT-GREEN Tag Roll $29 ex GSTOPT-ORANGE Tag Roll $29 ex GSTOPT-BLUE Tag Roll $29 ex GSTOPT-RED Tag Roll $29 ex GSTOPT-BURGUNDY Tag Roll $29 ex GSTPRO-CLEAR Tag Roll $52 ex GST
Ordering Code:PROTAG OPTIMA II $3,999 ex GST
ProTag Optima IIEmona
TAG PRINTING & ASSETMANAGEMENT
Test Tags Ordering Codes:OPT YELLOW Tag Roll $29 ex GSTOPT-WHITE Tag Roll $29 ex GSTOPT-GREEN Tag Roll $29 ex GSTOPT-ORANGE Tag Roll $29 ex GSTOPT-BLUE Tag Roll $29 ex GSTOPT-RED Tag Roll $29 ex GSTOPT-BURGUNDY Tag Roll $29 ex GSTPRO-CLEAR Tag Roll $52 ex GST
Ordering Code:PROTAG PAC3760 DL $1,999 ex GST
ProTag PAC3760 DLEmona
LOW COST TAG PRINTINGAPPLIANCE TESTER
Ordering Code:PRO-LOGBOOK $17.76 ex GST
Log BookEmona
Ordering Code:ST-002 Red Pack $29 ex GSTST-002-Blue Pack $29 ex GSTST-002-Orange Pack $29 ex GSTST-002-Green Pack $29 ex GSTST-002-White Pack $29 ex GSTST-002-Yellow Pack $29 ex GSTST-002-Mixed Pack $29 ex GSTST-002-Danger Pack $29 ex GST
TEST TAGS & LOG BOOK
Test TagsEmona
2 • EMONA Instruments • • NSW Tel 9519 3933 • VIC Tel 9889 0427 • QLD Tel 3392 7170
Portable Appliance Testers1
• Australia’s Most Advanced Testingand Tagging System
The ProTag Elite is Australia’s mostadvanced PAT system. It not onlyconducts appliance and RCD tests, butalso offers user defined assetinspections and an built-in digitalcamera with flash, all in the onehandheld tester.
ProTag Elite tests portable appliances& RCDs to AS/NZS3760, takes assetphotos, prints Elite UV/heat resistanttest tags and download results to PC
Advanced Features• High definition colour display• On-board camera for asset/fail
photos• USB port for data download• Email data via tablet and android
smartphone• Bluetooth interface for scanner &
printer• QWERTY keypad• 50,000 test result memory• Battery or mains powered• Optional Compliance Modules
Electrical Test Functions• Mains supply check• IEC lead test• Earth continuity (200mA)• Insulation resistance 250V and 500V• Leakage current test• Fixed & portable 10mA/30mA RCD
test• In-built isolation transformer• 3 phase testing & test result logging
(with PAC-TPL optional adaptor
Flexible Data Transfer & EmailingEasily download results onto a USBflash drive or via USB cable to PC orlaptop. For remote applications,transfer data via Bluetooth to yoursmartphone or tablet, without anyadditional software, then email thedata directly back to the office forimmediate database management orcustomer reporting and invoicing.
Superb Software ManagementPATGuard 3 allows users to record,store and report on their PAT testing,asset inspections and compliancemodule inspections. Tag records andprint reports with photos for visualevidence, generate a wide range ofwork and asset history reports andsend automatic email alerts whennext tests or inspections are due.
ProTag Elite PrinterThe ProTag Elite printer is a combinedthermal direct and thermal transferprinter. Choose between OPTIMA(thermal direct) general purpose tagsor ELITE (thermal transfer) tags for allharsh environments such as outdoorexposure to UV and demandingindoor applications such ascommercial kitchens.
ProTag BCS-OPT ScannerThe BCS-OPT Bluetooth scanner isused for rapid entry of appliancenumbers and descriptions. It providesgreat efficiency by freeing theoperator from typing asset IDs. Justscan the asset ID bar code on theappliances’ previous test tag.
Complete Kit, User Training &CalibrationThe ProTag Elite System is suppliedcomplete with PrimeTest Elite tester,ProTag Elite tag printer, BCS-OPTscanner, PATGuard Elite 3 softwareand Elite hard transit case, all backedup by full after sales support with on-site training (conditions apply) andannual re-calibration to keep yourtester up-to-date with latest firmware.
ELITE Test Tags Ordering Codes:ELT YELLOW Tag Roll $32 ex GSTELT-WHITE Tag Roll $32 ex GSTELTGREEN Tag Roll $32 ex GSTELT-ORANGE Tag Roll $32 ex GSTELT-BLUE Tag Roll $32 ex GSTELT-RED Tag Roll $32 ex GSTELT-BURGUNDY Tag Roll $32 ex GSTELITE-RIBBON Cartridge $36 ex GST
OPTIMA Test Tags Ordering Codes:OPT YELLOW Tag Roll $29 ex GSTOPT-WHITE Tag Roll $29 ex GSTOPT-GREEN Tag Roll $29 ex GSTOPT-ORANGE Tag Roll $29 ex GSTOPT-BLUE Tag Roll $29 ex GSTOPT-RED Tag Roll $29 ex GSTOPT-BURGUNDY Tag Roll $29 ex GSTPRO-CLEAR Tag Roll $52 ex GST
Ordering Code:PROTAG Elite Call for Pricing
ProTag EliteEmona
ADVANCED TEST & TAGSYSTEM
• SA Tel 8363 5733 • WA Tel 9361 4200 TOLL FREE 1800 632 953 • EMONA Instruments • 3
Portable Appliance Testers 1
• Stand-Alone 3 Phase Tester• Includes Adaptor for Safe Extension
Lead Testing
The ProTag PAC-3P 3 phase applianceand extension lead tester conductsearth continuity and leakage currenttests in a portable, battery poweredinstrument.
The unit conducts a sequence test,starting with an earth continuity testand then proceeding with the leakagetest. It indicates Pass/Fail and theactual measured readings on the LCDdisplay, and provides on-screen userprompts. 20A and 32A extension leadtest adaptor is included with an earthtest pin terminal, which eliminates theneed for probing,
•PAC-3P•Display LCDIndication PASS/FAIL and measured
valuesOperation 2 push buttonsEarth Continuity TestDisplay Range 0.1ohm to 20ohm Test current 200mAPass/Fail limit 1ohm Accuracy better than 5% at 1ohmLeakage TestDisplay Range 0.15mA to 9.99mA. Pass/Fail limit 5mA.Accuracy better than 5% at 5mA.Power Source 2 x 9V batteriesAccessory 20A and 32 extension lead
test adaptor with earth test pindisplay and a Pass/Fail display.
• For Use With PAC3760 DL & ProTagElite System
Most three phase equipmentincorporates electronic circuitry suchas temperature controls, PLCs whichcontrol relays, or motors whichrequire starter circuits such ascontactors.
All of these types of controls,contactors and relays must bepowered on to latch. Performing aninsulation resistance test on suchdevices will only test up to the on/offswitch and not show any faults insidethe actual appliance.
The PAC-TPL provides users of thePAC3760 DL and ProTag Elite with thecapability of powering up 10A, 16A,20A and 32A appliances and carryingout a leakage test. The test results aredisplayed on the PAC3760 plus unit,with both the actual leakage readingdisplay and a Pass/Fail display.
The PAC-TPL provide a safe way oftesting three phase appliances, at allspeeds and settings, whilst taking aquick and easy measurement in mAon the LCD display.
•PAC-TPL•Earth Continuity see PAC3760 Test
Instrument specificationTest Voltage 3 phase supply voltageTest Duration continuousDisplay Range 0.15mA to 9.99mAMeasurement Range
0.25mA to 9.99mAAccuracy ±(5% + 2 digits)Frequency Response 50HzPass Value 5mA
• Insulation Test 3 Phase Appliances• Use with Any PAT Tester
The TPI series can be used with anyappliance tester and are designed forinsulation and earth testing of 3phase extension leads and 3 phaseappliances. The TPI series suit 4 and 5pin, 10A, 16A, 20A and 32A plugs
TPI Series Overview• Set the appliance tester to Class I• The adaptor allows the appliance
tester to check insulation resistanceand earth continuity
•TPI Series•TPI 20A 10A & 20A, 4 & 5 pin TPI-32A 16A & 32A, 4 & 5 pin
• Use with Any RCD or PAT Tester• Inbuilt 500V Fuses for Safety
The ProTag RCD-3P ONLY suits 5 pinthree phase sockets and is available in2 models: RCD-3P-20A for 20A socketsand RCD-3P-32A for 32A sockets.
3 PHASE APPLIANCE &EXTENSION LEAD TESTER
PAC-3PEmona
Ordering Code:PAC-3P $1,299 ex GST
THREE PHASE ADAPTOR
PAC-TPLEmona
Ordering Code:PAC-TPL $1,099 ex GST
THREE PHASEINSULATION TEST
PAC-TPIEmona
Ordering Code:TPI-20A $149 ex GSTTPI-32A $149 ex GST
THREE PHASE RCDTESTING ADAPTORS
RCD-3PEmona
Ordering Code:RCD-3P-20A $329 ex GSTRCD-3P-32A $329 ex GST
Portable Appliance Testers1
4 • EMONA Instruments • • NSW Tel 9519 3933 • VIC Tel 9889 0427 • QLD Tel 3392 7170
• Measures Trip Time
The 4112EL is a professional,manually operated RCD tester thatmeasures trip time.
•4112EL•Trip Current Setting (includes)
10/30/100/300/500mAPhase Angle 00 & 1800
Trip & Phase Polarity IndicatorWiring Polarity IndicatorTimer Resolution 1mSCurrent Accuracy % proportion to VOver Temperature Indication
• Stores 1900 Measurements with a Two Level Memory Structure
The MI-3122 is an RCD tester andadditional loop impedance test withon-board memory and USB interface,allowing users to store test results fordownload to PC to meet -RCD testrecord keeping regulations.
•MI-3122•Voltage Range 50V - 264VTrip Current Setting
10/30/100/300/500/1000mATest Current Factor x1/2, x1, x2, x5Selectable Phase Angle
00 (positive), 1800 (negative)RCD Trip Current Measurement
with high resolution test rampRCD Trip Time Measurement at
nominal differential current inaccordance with standards
TRMS Voltage Measurement0V - 550V
Frequency Measurement 10Hz - 499.9Hz
Phase Sequence TestResult displayed as 1.2.3 or 3.2.1
Fault Loop Impedance Testincluding no trip out of RCD
Line Impedance TestData Storage 1900 measurements,
two level on-board memorystructure
Interface USB and RS232Optional EuroLink PRO Software for
result downloading and reporting
•Test Portable RCD’s Without Trippingthe Main Switchboard RCD
Simply plug PRO-ITX into mainspower outlet, plug the portable RCDunder test into PRO-ITX, connect RCDtester to portable RCD and conductthe test.
•PRO-ITX•Test Current 30mA x2 or x5 meeting
AS3760 and AS3190Thermal Protection from overload
short circuit currentsMains Lead 1.5m long
•Supplied with Calibration Certificate
The TX2000 Microwave LeakageMonitor is a compact, robust, singlerange RF power measurementinstrument operating at 2.45 GHzfrequency.
•TX-2000•Operating Frequency 2.45GHz
Calibration Accuracy +/-1dB
Step - Input Response Time
< 1 second
Resolution 0.1mW/cm2
Display 2 1/2 Digit LCD 10 point linear
display
Sensor - source spacing 5cm
Rigid Carry-Case with foam inserts.
• Comprehensive - Essential Reading
•Best Practices in Test & Tag•Over 250 pages of 'All You Need toKnow' information for carrying outtesting and tagging to AS/NZS3760.
3760
BASIC RCD TESTER
4112ELSEW
Ordering Code:4112EL $355 ex GST
LOGGING RCD TESTER
MI-3122Metrel
Ordering Code:MI-3122 $699 ex GSTA1291 Eurolink $189 ex GST
ISOLATIONTRANSFORMER
PRO-ITXEmona
Ordering Code:PRO-ITX $269 ex GST
MICROWAVE LEAKAGETESTER
TX-2000Celtek
Ordering Code:TX-2000 $549 ex GST
ACCESSORIES
Best Practices GuidebookCPV
Ordering Code:PRO-BPT $110 ex GST
Portable Appliance Testers 1
• SA Tel 8363 5733 • WA Tel 9361 4200 TOLL FREE 1800 632 953 • EMONA Instruments • 5
• Installation Tester Designed forAS3000 Wiring Rules and AS3017
The Instaltest 3017 is Australia’s firstinstallation and multifunction testerwith Pass/Fail limits set toAS/NZS3000 Wiring Rules & resultsrecording to meet reporting andrecord keeping obligations.
INSTALTEST 3017 Highlights• Fully customised to AS/NZS limits• Includes Visual Inspection, Correct
Circuit Connections, Fault LoopImpedance and RCD tests
• Unique Auto-Sequences speedcompliance testing by guiding usersthrough a full test sequence, e.g.lighting point or socket outlet
• Stores all test results, including date,time, tester’s name, and location
•INSTALTEST 3017•Instrument Functions voltmeter,
continuity tester, insulation testerpolarity tester, loop impedancetester, RCD tester, line voltage,frequency and phase rotation
Tests ConductedVisual Inspections general,
consumer mains, switchboards,wiring, electrical equipment,earthing
Earth Continuity & ResistanceTest 200mA, limit 0.5ohm
Insulation ResistanceTest 500V. installation limit1Mohm, heating elements limit0.01Mohm
Polarity Test 7mACorrect Connections 7mAFault Loop Pass/Fail limits per
AS3017RCD Tests Pass/Fail limits AS3017Auto Sequences Visual, Main Earth &
Insulation Resistance of CompleteInstallation, Metallic SwitchboardEnclosure, Aerial Conductor,Equipotential Bonding Conductors,Lighting Point, Socket Outlet, FixedAppliances
Pass/Fail Indication
The InstalTest is pre-programmedwith the Pass/Fail limits as perAS/NZS3017. For example the"Insulation Resistance: Installation"test is set to a 500V test with1MohmPass/Fail limit. Pass isindicated by a tick and Fail is indicatedby a cross. In addition, the InstalTestcan be used as a multimeter,insulation tester, loop impedancetester and RCD tester for generalelectrical work.The InstalTest 3017 is also suppliedwith the essential accessories toconduct tests to AS/NZS3017 such asa Resistor Box for polarity and circuitconnection tests on socket outlets.Fully Documented Test Results
No more hand writing test resultswhen compliance testing electricalwork and providing reports of testresults. Simply conduct the test, pressthe MEM button to save the resultand assign the result to a location, e.g.DB1 CB1.
• In-Built AS/NZS3017 Limits• Datalogging Test Results for
Reporting
The MI-3125BT is a dataloggingmultifunction installation tester,replacing a multimeter, insulationtester, RCD tester, loop impedancetester and phase sequence indicatorin one tester.•MI-3125BT•Voltage 0 - 550VFrequency 0 - 499.9HzContinuity 200mA for earth
resistance and equipotentialbonding
Insulation Resistance 50V to 1000V,0.01Mohn to 200Mohm
RCD Testing trip time and tripcurrent, 10mA, 30mA ... 1000mA,and with 0o or 180o startingpolarity
Fault Loop ImpedancePhase RotationSocket Test earth continuity, polarity
and correct connections tests witha single push button and withPass/Fail indication without trailingleads
Overvoltage Category 600V CAT IIIand 300V CAT IV
Datalogging approx 2,000 test resultsSoftware Eurolink PRO provides
reporting and upload of site treestructure
Includes mains measuring cable,3 x test leads, 3 x test probes,3 x crocodile clips, 5ohm and10ohm resistor box for socket test,AC adaptor and NiMH rechargeablebatteries
MI-3125BTMetrel
Ordering Code:INSTALTEST 3017 $2,149 ex GSTIncludes Reporting SoftwareOptionsA119X Cable Tracing Kit $392 ex GST
InstalTest 3017Metrel
LOGGING INSTALLATIONTESTERS
Ordering Code:MI-3125BT $1,499 ex GSTIncludes Reporting Software
SECTION INDEXInstallation TestersInsulation TestersEarth Resistance TestersRCD TestersLoop Impedance MetersPhase Rotation IndicatorsAccessories
Installation Testing2
6 • EMONA Instruments • • NSW Tel 9519 3933 • VIC Tel 9889 0427 • QLD Tel 3392 7170
• In-Built AS/NZS3017 Limits
The InstalTest COMBO is amultifunction installation tester,replacing a multimeter, insulationtester, RCD tester, loop impedancetester and phase sequence tester in asingle portable instrument.It provides 9 tests, more than anyother comparable tester and providesPass/Fail indication for installationverification and compliance testing.•InstalTest COMBO•Voltage 0 - 550VFrequency 0 - 499.9HzContinuity 200mA for earth
resistance and equipotentialbonding
Insulation Resistance 50V to 1000V,0.01Mohn to 200Mohm
RCD Testing trip time and tripcurrent, 10mA, 30mA ... 1000mA,and with 0o or 180o startingpolarity
Fault Loop ImpedancePhase RotationSocket Test earth continuity, polarity
and correct connections tests witha single push button and withPass/Fail indication without trailingleads
Overvoltage Category 600V CAT IIIand 300V CAT IV
Includes mains measuring cable,3 x test leads, 3 x test probes,3 x crocodile clips, 5ohm and10ohm resistor box for socket test,AC adaptor and NiMH rechargeablebatteries
• Verify 3 Phase Installations from TheSocket Outlet - No Probing Required
• Use with IT3017 & MI-3125 Series
Verify 3 phase installations from thesocket outlet, without the need forprobing. The MI-TPI makes 3 phaseinstallation verification safer, fasterand more reliable than traditionalmethods requiring probing of thesocket outlet.
Simply connect the MI-TPI to themains socket on your InstalTest 3017or MI-3125 COMBO, select the testrequired on the tester, select theswitch position on the MI-TPI then usethe MI-TPI to switch between phases.
Phase Sequence & Voltage Display
3 Phase RCD Testing DisplaySWITCH POSITIONSInsulation Testing
Phases to Neutral, BetweenPhases, Phases & Neutral to Earth
Loop/Line ImpedanceL1 - N/PE, L2 - N/PE, L3 - N/PE
RCD TestingL1 - N/PE, L2 - N/PE, L3 - N/PE
Phase Sequence & Voltage3 Phase Plugs standard and custom
confIgurations available.
• High Quality Taut Band Movement• Self-Contained and Portable
•4132IN•Test Voltages
250V DC 100Mohm500V DC 200Mohm1000V DC 400Mohm
Accuracy +5%Scale Multiplier 1/2, x1, x2Insulation Output Short-Circuit
Current +1.3mAContinuity 0 - 3ohm, 0 - 500ohmContinuity Output Short-Circuit
Current >210mAAC V 0 - 600V ACLive Circuit Warning Light & BuzzerBattery Check During Load test
• Auto Ranging & Auto Battery Check
•4101IN•Ranges 2Gohm, 4Gohm, 8GohmTest Voltages 250V, 500V & 1kV DCAccuracy +2% of readingsAC Voltmeter Range 1 to 750VDC Voltmeter Range 1 to 950V DCContinuity Range 0.01 - 1999ohmShort Circuit Current 225mA
4132IN 1kV AnalogSEW
BASIC INSULATIONTESTERS
InstalTest COMBOMetrel
MANUAL INSTALLATIONTESTER
Ordering Code:MI-TPI-32A-5 32A, 5 PIN $249 ex GSTMI-TPI-20A-5 20A, 5 PIN $249 ex GSTMI-TPI-32A-4 32A, 4 PIN $249 ex GSTMI-TPI-20A-4 20A, 4 PIN $249 ex GST
MI-TPI SeriesEmona
3 PHASE INSTALLATIONTESTING ACCESSORIES
Ordering Code:INSTALTEST COMBO $999 ex GST
Ordering Code:4132IN $299 ex GST
4101IN 1kV DigitalSEW
Ordering Code:4101IN $339 ex GST
2Installation Testing
• SA Tel 8363 5733 • WA Tel 9361 4200 TOLL FREE 1800 632 953 • EMONA Instruments • 7
• Wide Range Up To 30Gohm
•MI-3121•Test Voltages 50, 100, 250, 500 and
1000V DCInsulation Resistance 0-30GohmContinuity 200mA, 0 - 1999ohm with
automatic polarity exchangeTRMS AC V 0 - 550V ACFrequency 0.00Hz - 500HzAnalogue Scale & Digital ReadingsCustom Limits set limits on
insulation or continuity withPASS/FAIL indication and red/greenLEDs
Magnetic Holder for hands free useBuilt-in Charger & Rechargeable
BattOptional PC software and probe
• Capable of Measuring Earth Voltage
•4120ER•Earth Resistance 0 - 1999ohmEarth Voltage 0 - 199.9V ACAccuracy Earth Resistance
12/120/1200ohm +2.1% +1mmEarth Voltage +(1%rdg +2 dgts)2mA Measuring Current permitsearth resistance tests withouttripping earth leakage currentbreakers test.
• 2, 3 and 4 Pole Measurements
•MI-3123•Standard 4-Wire Method
Display Range 0 - 9999ohmStandard 4-Wire with Current
ClampDisplay Range 0 - 9999ohm
2-Clamp Method without Junctions DisassemblingDisplay Range 0 - 99.9ohm
Specific Earth Resistance (soilresistance) Measurement with 4-Wire Method Display Range 0 - >100kohm/m
True RMS Current 0 - 19.99ACustom Limits with PASS/FAILOptions Clamps & PC Software
• Measures Trip Time
•4112EL•Trip Current Setting (includes)
10/30/100/300/500mAPhase Start Selection 00 & 1800
Trip & Phase Polarity IndicatorWiring Polarity IndicatorTimer Resolution 1mSCurrent Accuracy % proportion to VOver Temperature Indication
• RCD Tester, Loop Impedance & Phase Sequence Tester
•MI-3122•Voltage Range 50V - 264VTrip Current Setting
10/30/100/300/500/1000mATest Current Factor x1/2, x1, x2, x5Selectable Phase Angle
00 (positive), 1800 (negative)RCD Trip Current Measurement
with high resolution test rampRCD Trip Time Measurement at
nominal differential current inaccordance with standards
Optional Software for resultdownloading and reporting
Ordering Code:MI-3122 $799 ex GSTA1291 Software $189 ex GST
MI-3121 LoggingMetrel
LOGGING INSULATIONTESTER
MI-3122 Logging TesterMetrel
Ordering Code:4112EL $355 ex GST
4112EL Low CostSEW
RCD TESTERS
Ordering Code:MI-3123 $950 ex GSTA1291 Software $189 ex GST
MI-3123 Logging TesterMetrel
Ordering Code:4120ER $298 ex GST
4120ER Low CostSEW
EARTH RESISTANCETESTERS
Ordering Code:MI-3121 $619 ex GSTA1291 Software $189 ex GST
Installation Testing2
8 • EMONA Instruments • • NSW Tel 9519 3933 • VIC Tel 9889 0427 • QLD Tel 3392 7170
• Autoranging, One Button Operation
•4126NA•Loop Impedance Range
0.03 - 2000ohm Auto-rangingProspective Short Circuit (PSC)
0 - 6kA @ 230V ACMeasures
L-E and L-N AC voltagesL-E and L-N Loop ImpedancePSC L-E & L-NEarth Spike, Line & Neutral Imped
Autoranging
• RCD Tester, Loop Impedance & Phase Sequence Tester
•MI-3122•Voltage Range 50V - 264VTrip Current Setting
10/30/100/300/500/1000mATest Current Factor x1/2, x1, x2, x5Selectable Phase Angle
00 (positive), 1800 (negative)RCD Trip Current Measurement
with high resolution test rampRCD Trip Time Measurement at
nominal differential current inaccordance with standards
Optional Software for resultdownloading and reporting
• Unique Waist Strap Mounted 50MTrailing Lead Reel, Leads & Probes
The EC-KIT is a professional kit toassist in earth continuitymeasurements on electricalinstallations and solar PV installations.Unique features such as a slidingsocket connection on the trailing leadreel, twist lock telescopic probe and1000V CATIII.
•EC-KIT•EC-REEL-50M waist strap mounted
reel with 50m of cable length and adesign that leaves both hands freefor probing the test point andoperating the test instrument. Thereel features a unique slidingsocket design that allows the userto wind up and unwind the trailinglead without any twisting of thewire. Cable section is 0.75mm2 andprotection rating is 1000V CAT III.
EC-TP-85 telescopic probe which is47cm in retracted mode and 85 cmlong fully extended. The probeuses a quick and easy twist lockmechanism for retraction andextension of the probe. Protectionrating 1000V CATIII.
2 Coiled Cables a short 80cm cablethat is used to connect the testinstrument to the EC-REEL-50Mand a second longer 120cm coiledcable to connect the testinstrument to the telescopic probeor 2mm tip probe.
2mm Tip Probe for probing earthpoints on socket outlet testing.
Heavy Duty Crocodile Clip foreffective connection to protectiveconductors. Fitted with 4mmsocket for easy connection totrailing lead.
• Phase Rotation and Open Phase
The ST-850 is designed to check phasesequence indicated by a rotating disk.Three indicators verify at a glance thateach phase is active.
•ST-850•V AC 90 to 600VFrequency 50 to 60Hz
• 3 Phase & Motor Rotation/Wiring
The 888PMR is a 3 phase powerverification and rotation indicator, aswell as 3 phase motor rotation tester.It is ideal for servicing, repairing andmaintenance of 3 phase systems and 3 phase rotating machines.
•888PMR•Phase Presence 100V AC to 600V ACPhase Sequence 1V AC to 600V ACFrequency 2Hz to 400HzLED Indicators
3 Phase Power determine phaserotation field direction3 Phase Machines determinemotor connections
Battery Status IndicatorCATIII 600V Protection
Ordering Code:888PMR $182 ex GST
888PMR Industrial SEW
Ordering Code:MI-3122 $799 ex GSTA1291 Software $189 ex GST
MI-3122 Logging TesterMetrel
Ordering Code:ST-850 $109 ex GST
ST-850SEW
PHASE ROTATIONINDICATION
Ordering Code:EC-KIT $349 ex GST
EC-KITElectro PJP
EARTH CONTINUITYTRAILING LEAD KIT
Ordering Code:4126NA $362 ex GST
4126NA Low CostSEW
LOOP IMPEDANCE TESTER
2Installation Testing
• SA Tel 8363 5733 • WA Tel 9361 4200 TOLL FREE 1800 632 953 • EMONA Instruments • 9
• Combined Electrical PV InstallationTester, I-V Curve Analyser andElectrical Installation Tester
The InstalTest PV is a completephotovoltaic tester and electricalinstallations tester. It enablescomplete testing of electricalinstallations, and in addition performsI - V characteristic, calculation of STCvalues and power measurements onthe inverter’s DC and AC sides. Theunit is designed for working up to1000 V, with 15 A DC.
Instaltest PV FeaturesPV Electrical Measurements
Voltage, current, frequency, power,PF, energy, harmonics
PV Module MeasurementsI-V curve of modules and strings upto 1000V, 10A, 10kWGraphical I-V curve indicationIrradianceModule Temperature
Electrical InstallationsMeasurementsVoltage, Frequency, Continuity,Insulation Resistance, RCD Testing,Fault Loop Impedance, PhaseRotation, Socket Outlet Test, EarthResistance, Power, Energy andHarmonics
Overvoltage Category 600V CAT IIIand 300V CAT IV
PC Interface RS232 and USBSoftware EuroLink PRO
• Connects Directly to PV Array WithMC4 Connectors
• Safe - No Probing Required & No Exposed Live DC Conductors
PV array electrical testing typicallyrequires the use of three separatetest instruments: acontinuity/insulation resistance tester,a digital multimeter and a DC currentclamp.
The test leads supplied with theseinstruments are not designed fordirect connection to theinterconnections commonly found onPV systems, resulting in the installerusing makeshift test adaptors toconnect to the PV system and to shortcircuit the PV strings for short circuitcurrent measurement. This poses therisk of accidental contact with live DCconductors or damage to the PVpanels.
4 Steps To Safe and Easy Solar PVTesting1. Isolate the AC and DC supply2. Connect the PV-150 to the PV array
using the test adaptors supplied3. Press the TEST key and watch the
measurements appear on screen4. Press the STORE key to save all
on-screen measurements.
PV-150 FeaturesElectrical Tests: Earth Continuity,
Insulation Resistance, Open CircuitVoltage, Short Circuit Current,Operating Current
Memory 200 recordsPC Connectivity USBSolarLink Connectivity wireless
capture and record real time
irradiance, ambient temperatureand PV module temperature fromSolar Survey SS-200R (included inSolarLink Kit))
Kit Includes 2 x MC4 test leadadaptors, red and black test leadswith probe and detachable alligatorclip, AC/DC current clamp, ruggedcarry bag, Quick Start Guide,Support CD Rom with InstructionalVideo and Calibration Certificate
• Complete Tool for Solar Site Surveys• Measures Irradiance With PV Cell• Built-in Compass, Inclinometer and
Dual Channel Temperature Meter• Data Logging with Real Time Clock
The Solar Survey Series are ruggedhandheld units that not only measureirradiance, but also have a built-ininclinometer to measure roof pitch,compass to measure roof orientationand thermometer to measureambient air and module temperature.
SS-100/SS-200R FeaturesIrradiance Range
100 - 1250Wm-230 - 400 BTU/h/ft2
Irradiance Sensor PV reference cellTemperature -30oC to 100oCCompass Bearing 0o to 360oInclinometer 0o to 90oData Logging SS-200R only
Ordering Code:SS-100 $429 ex GSTSS-200R $625 ex GST
Ordering Code:InstalTest PV $2,999 ex GST
Ordering Code:PV-150 $2,199 ex GSTSolarLink Kit $2,599 ex GST
InstalTest PVMetrel
MULTIFUNCTION SOLARINSTALLATION TESTER
Solar Survey 100/200RSeaward Solar
IRRADIANCE & SITE SURVEY METERS
PV-150Seaward Solar
SOLAR PV INSTALLATIONTESTER
SECTION SUMMARYSolar Installation TestersIrradiance & Site Survey Meters
Solar PV Testing3
10 • EMONA Instruments • • NSW Tel 9519 3933 • VIC Tel 9889 0427 • QLD Tel 3392 7170
• Affordable, High Quality• Visible Light Camera• Duo Vision Picture-in-Picture
Trotec’s EC060V is a high qualityEuropean made camera, offering“Duo Vision” overlapping visibleand IR images, an IP54 rating and50/60Hz image repetition rateguaranteeing the market’s sharpestimages.
•EC060V•
Resolution 160 x 120Temperature Range -20oC to +250oCAccuracy ±2% or ±2oCGeometric Resolution 2.2mradThermal Sensitivity 0.1oC at 30oCFocal Distance 0.10mFocus manuaFrame Rate 50/60HzVisible Light Camera with integrated
photo lampDuo Vision visible & IR imagesMeasurement Modes 5 spotsColour Palette 6Emissivity Correction 0.01 to 1.0Ambient Temperature CorrectionThermal File Format 14-bit formatImage Storage 2GB mini-SD cardImage Display 2.5” TFT LCD Laser PointerBattery Type Li-Ion rechargeableBattery Operating Time 3 hoursPC Interface mini-SD card or USBAnalysis SoftwareOptions wide angle & telephoto lense
• Extra Large 3.5” Hi Res Display• High Precision 384 x 288 Array• DuoVision Picture-in-Picture
Trotec’s IC080LV is the ideal choice forprofessional thermal imaging serviceproviders. The IC080LV provides all ofthe advanced features professionalusers require.
•IC080LV•
Resolution 384 x 288Temperature Range -20oC to 600oCAccuracy ±2% or ±2oCGeometric Resolution 2.2mradThermal Sensitivity 0.1oC at 30oCFocal Distance 0.10mFocus manualFrame Rate 50/60HzMeasurement Modes 4 movable
spots, Colour Palette 6Emissivity Correction variable from
0.01 to 1.0Ambient Temperature CorrectionVisible Light Camera with integrated
photo lampImage Display IR image, visible light
image, 4 DuoVision options forcombined IR and visible lightimages
Thermal File Format 14-bitradiometric IR format
Image Storage interchangeablememory card slot for mini-SD card
Image Display large 3.5” LCD, highresolution 320 x 240 pixels
Laser PointerBattery Type Li-Ion rechargeableBattery Operating Time 2.5 hoursPC Interface USB. Hard Carry CaseAnalysis SoftwareOptions wide angle & telephoto lense
• High Precision 384 x 288 Array• Wide Temp Range -20
oC to 1,500
oC
• DuoVision Picture-in-Picture
Trotec’s IC125LV provides all of theadvanced features found in the IC-Vseries as well as a high precision 384 x288 display, market leading 1.3mradresolution and a wide -20oC to 1,500oCtemperature range. The IC125LV willsatisfy demanding applications.
•IC125LV•
Resolution 384 x 288Temperature Range -20oC to 1,500oCAccuracy ±2% or ±2oCGeometric Resolution 1.3mradThermal Sensitivity 0.1oC at 30oCFocal Distance 0.10mFocus manualFrame Rate 50/60HzMeasurement Modes 4 movable
spots, Colour Palette 6Emissivity Correction variable from
0.01 to 1.0Ambient Temperature CorrectionVisible Light Camera with integrated
photo lampImage Display IR image, visible light
image, 4 DuoVision options forcombined IR and visible lightimages
Thermal File Format 14-bitradiometric IR format
Image Storage interchangeablememory card slot for mini-SD card
Image Display high resolution 2.5”LCD
Laser PointerBattery Type Li-Ion rechargeableBattery Operating Time 2.5 hoursPC Interface USB. Analysis SoftwareOptions wide angle & telephoto lense
IC125LVTrotec
Ordering Code:IC080LV $4,999 ex GST
IC080LVTrotec
Ordering Code:EC060V $1,999 ex GST
EC060VTrotec
ADVANCED THERMALIMAGING CAMERAS
Ordering Code:IC125LV $8,199 ex GST
SECTION SUMMARYAdvanced & High Precision ThermalImaging Cameras
Thermal Imaging4
• SA Tel 8363 5733 • WA Tel 9361 4200 TOLL FREE 1800 632 953 • EMONA Instruments • 11
• CAT IV 1000V Overvoltage Protection• Highest Accuracy Handheld DMM
The MD-9060 ranks among the mostaccurate multimeters with a largebandwidth and very high resolution.The VFD feature makes theinstrument capable of measuring truevalues in accordance with frequency,
•MD-9060•TRMS AC & AC+DC VOLTAGERange 500.00 mV to 1000.0 V Accuracy
from ±(0.45 % of reading + 40 dig)AC VOLTAGERange 500.00 mV to 1000.0 V Accuracy ±(0.3 % of reading + 20 dig)DC VOLTAGERange 500.00 mV to 1000.0 V Accuracy
from ±(0.02 % of reading + 2 digits)DC CURRENTRange 500.0 μA to 10.00 A Accuracy ±(0.15 % of reading + 20 dig)
TRMS AC & AC+DC CURRENTRange 600.0 μA to 10.00 A Accuracy
from ±(0.5 % of reading + 50 digits)Diode Test 2.000 V Resistance 500.0 Ω to 50.00 MΩ Conductance 99.99 nSMains Freq 10 Hz to 200 kHz Digital Freq 5.000 Hz to 1.0000 MHz Capacitance 50.00 nF to 25.00 mF Temperature -50 °C to +1000 °C MAX/MIN/AVG, Data/Peak HoldOvervoltage Cat CAT IV / 1000 V
• CAT IV 1000V Overvoltage Protection• With Non-Contact Voltage Detection
The MD-9050 is a top-of-the lineindustrial multimeter. High resolutionand accuracy, fast data acquisition,CAT IV 1000V, TRMS current andvoltage and non-contact voltagedetection.
•MD-9050•TRMS AC & AC+DC VOLTAGERange 60.00 mV to 999.9 V Accuracy
from ±(0.5 % of reading + 3 digits)AC VOLTAGERange 9.999 V to 999.9 V Accuracy ±(1.0 % of reading + 4 dig)DC VOLTAGERange 60.00 mV to 999.9 V Accuracy
from ±(0.06 % of reading + 2 digits)DC CURRENTRange 600.0 μA to 10.00 A Accuracy ±(0.2 % of reading + 4 dig)TRMS AC & AC+DC CURRENTRange 600.0 μA to 10.00 A Accuracy
from ±(0.6 % of reading + 3 digits)Diode Test 2.000 V Resistance 600.0 Ω to 60.00 MΩ Conductance 99.99 nSMains Freq 15.00 Hz to 50.00 kHz Digital Freq 5.00 Hz to 1.000 MHz Capacitance 60.00 nF to 25.00 mF Temperature -50 °C to +1000 °C MAX/MIN/AVG, Data Hold, Peak
HoldOvervoltage Cat CAT IV / 1000 V
• CAT IV 1000V Overvoltage Protection• Large 2-Line LCD Display
Metrel’s MD-9040 is the all roundmeter for industrial applicationscovering high level industrial testing,electronic faultfinding, field servicingand heavy duty electrical testing.
•MD-9040•TRMS AC VOLTAGERange 60.00 mV to 999.9 V Accuracy
from ±(0.5 % of reading + 3 digits)
DC VOLTAGERange 60.00 mV to 999.9 V Accuracy
from ±(0.06 % of reading + 2 digits)
DC CURRENTRange 600.0 μA to 10.00 A Accuracy ±(0.2 % of reading + 4
digits)
TRMS AC CURRENTRange 600.0 μA to 10.00 A Accuracy
from ±(0.6 % of reading + 3 digits)
Diode Test 2.000 V Resistance 600.0 Ω to 60.00 MΩ Conductance 99.99 nSMains Freq 15.00 Hz to 50.00 kHz Digital Freq 5.00 Hz to 1.000 MHz Capacitance 60.00 nF to 25.00 mF MAX/MIN/AVG, Data Hold, Peak
HoldPC Link via optical interfacePower Supply 9 V batteryOvervoltage Cat CAT IV / 1000 V
Ordering Code:MD-9040 $207 ex GSTOrdering Code:
MD-9060 $455 ex GST
MD-9040Metrel
4 DIGIT TRMS INDUSTRIAL METER
Ordering Code:MD-9050 $286 ex GST
MD-9050Metrel
4 DIGIT HEAVY DUTYTRMS INDUSTRIAL METER
MD-9060Metrel
4 DIGIT HEAVY DUTYTRMS INDUSTRIAL METER
SECTION INDEXMultimetersTest Leads & Accessory Kits
Multimeters5
12 • EMONA Instruments • • NSW Tel 9519 3933 • VIC Tel 9889 0427 • QLD Tel 3392 7170
• TRMS AC Voltage & Current
MD-9030 Highlights• TRMS AC/DC V up to 1000V• TRMS AC/DC A up to 10A• Diode Test • Resistance 400.0 Ω to 40.00 MΩ • Temperature -20 °C to +300 °C • Frequency 50.00 Hz to 1.000MHz • Capacitance 500.0 nF to 3000 μF • MAX Hold, Data Hold• Overvoltage Cat CAT IV/300V
• Affordably Priced DMM
MD-9020 Highlights• AC/DC V up to 1000V• AC/DC A up to 10A• Diode Test • Resistance 400.0 Ω to 40.00 MΩ • Temperature -20 °C to +300 °C • Frequency 50.00 Hz to 1.000MHz • Capacitance 500.0 nF to 3000 μF • Overvoltage Cat CAT IV/300V
• CAT IV 1000V Overload Protection
MD-1150 Highlights• Voltage Testing up to 1000V• Automatic AC/DC Recognition• Continuity Testing up to 2000ohm• Phase & Phase Sequence Testing• RCD Fault Test & Diode Test• Overvoltage Cat CAT IV 1000V
• Wide Measurement Range
LCR-9183 Highlights• Test Frequencies 100Hz, 120Hz, 1KHz,
10KHz, 100KHz• Inductance 200.00uH to 2000.0H• Capacitance 2000.0pF to 2.000m• Resistance 20.000Ω to 200.0MΩ• Counts 19999/1999 Dual Display • Calibration Open/Short calibration• Selectable Series/Parallel Modes • Auto LCR Smart Check
• Professional DMM Accessories Kit• 1000V CAT III Rated
Professional, European made deluxeaccessories kit enclosed in a pouch.
•KPJP-220•4mm Probes 1kV, CAT III,black & red
with 4mm tip, removeable tip coverFlexible Probes 1kV, CAT III,black and
red with crocodile tipTest Leads 1kV CAT III, 1.5m length,
0.75 mm2 (Imax 12A), silicon, 4mmplugs, black and red
Crocodile Clips 1kV, CAT III,black andred
Accessories Pouch with Zipper
• 1000V CATIV High Quality Kit
High quality, European made test leadkit for demanding industrialapplications.
•KPJP-EMIV•Probes 1kV, CAT IV, 16A rated,
black and red with 4mm socketTest Leads 1kV CAT IV, 1.5m length,
1 mm2 (Imax 20A), silicon, 4mmplugs, black and red
Ordering Code:KPJP-EMIV $34 ex GST
KPJP-EMIVElectro PJP
Ordering Code:KPJP-220 $99 ex GST
Ordering Code:LCR-9183 $144 ex GST
LCR-9183Lutron
LCR METER
KPJP-220Electro PJP
MULTIMETER TEST LEADS& ACCESSORY KITS
Ordering Code:MD-1150 $155 ex GST
MD-1150Metrel
VOLTAGE & CONTINUITYTESTER
Ordering Code:MD-9020 $103 ex GST
MD-9020Metrel
3 3/4 DIGIT GENERALPURPOSE METER
Ordering Code:MD-9030 $169 ex GST
MD-9030Metrel
3 3/4 DIGIT TRMSGENERAL PURPOSE
5Multimeters
• SA Tel 8363 5733 • WA Tel 9361 4200 TOLL FREE 1800 632 953 • EMONA Instruments • 13
• CAT IV 1000V Rating
The MD-9250 meets overvoltagecategory CAT IV 1000 V. The large jawscapacity of (max. 55 mm) in diameterallows AC/DC current measurementsup to 2000 A. The MD-9250 offershigh resolution and accuracy with 2-line LCD display and fast dataacquisition.
•MD-9250•DC Volt 1000VAC Volt 1000VAC Current 200.0A to 2000ATRMS AC/DC V & ATemperature -50 °C to +1000 °C Frequency 10Hz to 400.0HzJaw Size 55mmAuto-Check Function automatic
detection of AC voltage, DC voltageor resistance
Transient Protection it protects userin case of lightning strike orswitching surge up to 12 kV
Relative Zero Mode relative functionfor comparing the differencebetween signals or removingbackground noise.
Data Hold & Peak HoldOptional PC Link SoftwareDisplay large LCD display with
backlightOvervoltage Cat CAT IV 1000V
• TRMS AC A and Single Phase Power
The MD-9240 is a high versatile powerclamp meter. It measures TRMS AC A,AC and DC voltage, single phasepower, temperature and more. It isideal for checking distributionsystems, switchboards and motors orsystems where the supply iscontaminated with harmonics.
•MD-9240•DC Volt 600VAC Volt 600VAC Current 40.00A, 400.0A, 1000ATemperature -50 °C to +300 °C Ohms 999.9ΩContinuity Test 10 TO 300ΩFrequency 5.00Hz to 500.0HzPower Factor 0.10 to 0.99Apparent Power 0 to 600.0kVAActive Power, Reactive Power
0 to 600.0kW, kVarAuto Check automatic detection of
AC voltage, DC voltage or ACcurrent
Jaw Size 45mmData HoldPeak HoldOptional PC Link SoftwareDisplay large LCD display with
backlightPower 2 x 1.5V battery AAAOvervoltage Cat CAT IV 300V,
CAT III 600V
• TRMS Up to 800A AC
The MD-9230 is a universal currentclamp for measuring DC and TRMS ACvoltages up to 600V and TRMS ACcurrents up to 800A. It is an ideal toolfor service and industrial electricians.
•MD-9230•DC Volt 400.0mV, 4.000V, 40.00V,
400.0V, 600VAC Volt 400.0mV, 4.000V, 40.00V,
400.0V, 600VDC Current 400.0A, 1000AAC Current 40.00A, 800AOhms 400.0Ω to 40.00MΩContinuity Test 400.0ΩDiode Test Open-circuit voltage <1.6VCapacitance 500.0nF to 3000 μFJaw Size 50mmAutoranging user can switch
between auto and manual rangingRelative Zero ModeData HoldMAX HoldDisplay 3 3/4 digits, 4000 count large
LCD display with backlightPower 2 x 1.5V batteryOvervoltage Cat CAT IV 300V,
CAT III 600V
Ordering Code:MD-9230 $152 ex GST
Ordering Code:MD-9250 $435 ex GST
MD-9230Metrel
TRMS AC/DC CURRENTCLAMP METER
Ordering Code:MD-9240 $229 ex GST
MD-9240Metrel
TRMS POWER CLAMPMETER
MD-9250Metrel
CAT IV 1000V INDUSTRIALCLAMP METER
SECTION INDEXCurrent Clamp MetersPower Clamp MeterLeakage Clamps
Clamp Meters6
14 • EMONA Instruments • • NSW Tel 9519 3933 • VIC Tel 9889 0427 • QLD Tel 3392 7170
• High Accuracy Up To 2000A AC
The MD-9220 is a high quality TRMSclamp meter designed formaintenance and repair in the fieldand in industrial environments. It issuited to high powered 3-phasemachine testing.
•MD-9220•DC Volt 6.000V, 60.00V, 600.0VAC Volt 6.000V, 60.00V, 600.0VAC Current TRMS 400.0A, 2000AOhms 6.000kΩ, 60.00kΩ, 600.0kΩ,
6.000MΩContinuity Test 600.0ΩDiode Test Open-circuit voltage <1.6VFrequency 10Hz to 30kHzCapacitance 100.0nF to 2000 μFJaw Size 45mmAutoranging user can switch
between auto and manual rangingAuto Check automatic detection of
AC voltage, DC voltage orresistance
EF Detection non-contact and probe-contact electric field detection
Relative Zero ModeData HoldDisplay 3 5/6 digits, 6000 count large
LCD display with backlightPower 2 x 1.5v batteryOvervoltage Cat CAT IV 300V,
CAT III 600V
• Great Value for Money
•MD-9210•DC Volt 400.0mV to 600VAC Volt 4.000V to 600VAC Current 40.00A, to 600AOhms 400.0Ω to 40.00MΩDiode Test Open-circuit voltage <1.6VFrequency 10Hz to 100kHzCapacitance 500.0nF to 3000 μFJaw Size 26mmAutoranging & Relative Zero ModeOvervoltage Cat CAT IV 300V
• 0.1mA Resolution
•DCT-354•AC Current 200mA, 20A & 200A
±2% typicalMax Resolution 0.1mAData Hold for displayed valuesIncl. carry case and test leadsConductor Size 19mm
• Unique Earth Leakage Clamp Meter
The MD 9270 is a unique earthleakage clamp meter. It not just hasthe ability to accurately read theTRMS AC leakage current of a system,it can also detect losses in the systemand suggest possible reasons for theloss. Power measurements covervoltage, power, harmonic, powerfactor (PF), total harmonic distortion(THD) and crest factor.
•MD-9270•AC Current 40.00mA, 400.0mA,
4000mA, 40.00A, 150.0AAC Voltage 250.0V, 600.0VCrest Factor 1.00 to 9.99Peak Value
0 to 150.0A, 0 to 600.0VPower Factor 0.00 to 1.00Phase -180.0° to +180.0°Apparent Power 0 to 999.9kVAActive Power 0 to 999.9kWReactive Power 0 to 999.9kVArShielded Jaw use in the noisiest
environmentsIntelligent Loss Analysis complex
algorithms detect loss and allowdeterminating possible reasons
Harmonics measures current orvoltage harmonic components anda percentage value up to the 49th
Jaw Size 31mmMAX/MIN/Hold ModePeak ValueOptional PC Link SoftwareDisplay large LCD with backlightPower 2 x 1.5V battery AAAOvervoltage Cat CAT IV 300V,
CAT III 600V
Ordering Code:MD-9220 $147 ex GST
MD-9220Metrel
TRMS CURRENT CLAMPMETER
Ordering Code:MD-9270 $431 ex GST
Ordering Code:MD-9210 $123 ex GST
MD-9210Metrel
MINI CLAMP METER
Ordering Code:DCT-354 $272 ex GST
200mA ACEmtek
LEAKAGE CLAMP - AC A
MD-9270Metrel
LEAKAGE CLAMP TRMSWITH POWER FUNCTIONS
6Clamp Meters
• SA Tel 8363 5733 • WA Tel 9361 4200 TOLL FREE 1800 632 953 • EMONA Instruments • 15
• -35oC to +800oC Temperature Range
•BP21•Optical Resolution (D:S) 12:1Temperature Range -35°C to +80 °CAccuracy max. ±1 % of measured
value or ±1 °CSmallest Measuring Spot Size - ø
12.5 mm (distance 150 mm)Resolution 0.1 °C
• Temp Up To 50°C, RH Up To 95%
•T-200•Air & Dew Point Temperature
Measuring Range -20 °C to +50 °CAccuracy 0.1 °C / ± 0.4 °C
Air HumidityMeasuring Range 5 to 95 % r.H.Accuracy 0.1 % r.H. / ± 3 % r.H.
• With In-Built Laser Pyrometer
•T-250•Air & Dew Point Temperature
Measuring Range -20 °C to +50 °CAccuracy 0.1 °C / ± 0.4 °C
Air HumidityMeasuring Range 5 to 95 % r.H.Accuracy 0.1 % r.H. / ± 3 % r.H.
Surface TemperatureMeasuring Range -20 °C to+60 °COptical Resolution 8:1Accuracy 0.1 °C / ± 2 °C
Alarm audible and visible
• 2-in-1 Wood & Material Moisture
•BM20•Resistance methodElectrode Length approx. 8 mmWood Moisture
Measuring Range 1 - 45 %Building Moisture
Measuring Range 0.2 - 2.4 %
• Specialised Wood MoistureFunctions
•T-500•Wood Moisture
Measuring range 5 % to 50 %Material Moisture
Measuring Range 15 to 100 digitMax. Depth of Penetration
approx. 10 mm (connection)
• Microwave Measurement Principle
•T-600•Microwave MethodMeasuring Range 0 to 200 digitResolution/Accuracy 0.1 digitMax. Depth of Penetration
approx. 300 mm (non destructive)Alarm Signal audibleFunctions maximum, minimum, hold
and alarm
Ordering Code:Model T-600 $1,009 ex GST
T-600Trotec
MATERIAL MOISTURE - SUB-SURFACE TO 30CM
Ordering Code:Model T-500 $265 ex GST
T-500Trotec
WOOD & MATERIALMOISTURE METER
Ordering Code:Model BM-20 $87 ex GST
BM-20Trotec
MOISTURE INDICATOR
Ordering Code:Model T-250 $398 ex GST
T-250Trotec
TEMPERATURE, HUMIDITY& PYROMETER
Ordering Code:Model T-200 $235 ex GST
T-200Trotec
TEMPERATURE &HUMIDITY
Ordering Code:Model BP21 $104 ex GST
BP-21Trotec
PYROMETER
MultiMeasure Handhelds7SECTION INDEXMultiMeasure Handheld Testers
16 • EMONA Instruments • • NSW Tel 9519 3933 • VIC Tel 9889 0427 • QLD Tel 3392 7170
• With Alarm Function
•T-650•Dielectric MethodMeasuring Range 0 to 200 digitResolution/Accuracy 0.1 digitMax. Depth of Penetration
approx. 40 mm (non destructive)Alarm Signal audibleFunctions maximum, minimum, hold
and alarm
• Quick Determination of CO
•BG20•Measuring Range 0 - 1,000 ppmResolution 1 ppmAccuracy ±5 % or ±10 ppmSensor Type stabilized
electrochemical gas specific (CO)Warm-up Time < 20 secondsFunctions maximum value display,
hold function, illuminated display,threshold alarm, memory for 10measured values, auto power off
Operating Conditions 0 °C to +50 °C,0 % to 99 % RH (non-condensing)
• Unique 1m Telescopic Sensor
Professional hot wire anemometer forprecise determination of air speed, airtemperature and air flow volume Theunit is supplied complete withcalibration certificate. The flexibleprobe can be extended up to a lengthof 1 m, allowing users to carry outmeasurements on ducts and hard-to-reach places.
•TA300•
Probe Type telescopic probe, straight Probe Length 185 mm to 1,000 mm Probe Tip / Base 10 mm / 12 mm
Air Flow SpeedMeasurement Range 0.1 – 25.0 m/s,
0.3 – 90.0 km/h, 20 – 4,925 ft/min,0.2 – 55.8 mph, 0.2 – 48.5 kn
Accuracy ± (5 % of the measuringvalue + 1 measurement unit)
Resolution 0.01 m/s, 0.1 km/h, 1ft/min, 0.1 mph, 0.1 kn
TemperatureMeasurement Range 0 to +50 °C Accuracy ± 1 °C Resolution 0.1 °C
Air Flow VolumeMeasurement Range 0.001 – 999,000
m³/min (CMM), 0.001 – 999,000ft³/min (CFM)
Functions average spot and timemeasurements, minimum value,maximum value, hold function
Features Backlit display, auto poweroff, large LCD display with dualdigital readings, USB interface
Includes user manual, telescopicprobe, calibration certificate, case
• With Acoustic Alarm
•BG30•Detects natural gas, methane,
ethane, propane, butane, acetone,alcohol, ammoniac, petrol, LPG,engine fuel, hydrogen sulphide,industrial solvents, paint thinnersand other combustible gases
Accuracy 50 ppmStandard Calibration methaneAlarm Threshold / Alarm Level Max.
10 % LEL / 40 % LELReaction Time < 2 secondsFunctions optic and acoustic alarm
• Select from 4 Light Source Types
•LX-1108•Light Detector photo diode with
colour correction filter5 Ranges 400.00, 400.0, 4,000, 40,000,
400,000 luxSelectable Lighting Type tungsten,
fluorescent, sodium or mercuryMeasuring Range 0 to 400,000 luxDisplay Large LCD with bar-graph
Ordering Code:Model LX-1108 $199 ex GST
LX-1108Emtek
LUX METER
Ordering Code:Model BG30 $156 ex GST
BG-30Trotec
COMBUSTIBLE GAS DETECTOR
Ordering Code:Model T-300 $365 ex GST
TA-300Trotec
ANEMOMETER
Ordering Code:Model BG20 $278 ex GST
BG-20Trotec
CARBON MONOXIDEMETER
Ordering Code:Model T-650 $306 ex GST
T-650Trotec
MATERIAL MOISTURE - SURFACE UP TO 4CM
MultiMeasure Handhelds 7
• SA Tel 8363 5733 • WA Tel 9361 4200 TOLL FREE 1800 632 953 • EMONA Instruments • 17
• Supplied with Calibration Certificate
The SL300 is suitable for professionalmonitoring of noise levels in theworkplace and industry and formeasuring noise pollution. The SL300fulfils the requirements for AccuracyClass 2 sound level instrumentsaccording to IEC 61672-1.
The SL300’s A and C frequencyevaluation, Fast/Slow time evaluationand a variety of practical functionsmake this device ideal for demandingmeasurements. The unit is suppliedcomplete with calibration certificate.
•SL300•
Measuring Range 30 - 130 dB Accuracy Class 2Resolution 0.1 dB Frequency Range 31.5 Hz - 8 kHz Dynamic Range 50 dB Partial Measuring Ranges
30 to 80 dB, 50 to 100 dB, 80 to 130 dB, 30 to 130 dB (auto)
Response Time 500 ms Time Evaluation slow (S) 1 s, Fast (F)
125 ms Microphone electret condensator
microphone Functions and Features four-line
digital display, bar graph display,backlit display, 1/4-inch tripodthread, A/C frequency evaluation,max , min, hold function, selectabletime evaluation, alarm function,memory for 50 measurementvalues
Includes windshield, operatinginstructions, carrying case,calibration certificate
• Thickness of Non-Magnetic Coatings
•BB20•
Ferromagnetic Surfaces Sensor magnetic inductionSmallest Measuring Area 7 mmPrimary Layer Thickness 0.5 μm
NF Metallic SurfacesSensor eddy currentSmallest Measuring Area 5 mmPrimary Layer Thickness 0.3 μm
• Measures Distance, Area & Volume
•BD15•
Measuring Accuracy ±1.5 mmRange 0.05 to 50 m (0.16 to 164 ft)Units of Measurement m, in, ftFunctions minimum and maximum
measurements, non-stopmeasuring, addition andsubtraction, area and volumemeasurements, indirectmeasurements using Pythagorasfunction, illuminated display
• With Waterproof Camera Head
The BO20 is an all-purpose, easy-to-use video inspection system for quickvisual endoscopic inspections.
•BO20•
Probe Length 1,000mmFocussing Range 50 - 150mmIllumination quad-LEDIncludes rechargeable battery, side-
view mirror, hook and magnetattachment, USB cable, batterycharger, carry case
• Photo & Video Recording Capability
The BO25 saves inspection results asa photo and video which can bewatched on an external monitor ortransfer to PC for further processing.
•BO25•
Probe Length 1,000mmFocussing Range 50 - 150mmIllumination quad-LEDVideo Recording & Photo Images
320 x 240 pixels, JPEG, MPEG4, AVIand 3GP. USB interface
Memory internal 128MB and Externalslot for SD memory card
Ordering Code:Model B025 $348 ex GST
SOUND LEVEL METER
BO25Trotec
Ordering Code:MD-9210 $244 ex GST
BO-20Trotec
VIDEOSCOPE INSPECTOR & VIDEOSCOPE
Ordering Code:Model BD15 $173 ex GST
BD-15Trotec
DISTANCE METER
Ordering Code:Model BB-20 $261 ex GST
BB-20Trotec
COATING THICKNESSMETER
Ordering Code:Model SL-300 $203 ex GST
SL-300Trotec
MultiMeasure Handhelds7
18 • EMONA Instruments • • NSW Tel 9519 3933 • VIC Tel 9889 0427 • QLD Tel 3392 7170
• Dual Channel Digital Thermometer
The EMT502 is a professional dualchannel digital thermometer that alsooffers a differential measurementmode.
EMT-502 Features• Microprocessor circuit assures
maximum accuracy• Large LCD display• Dual function meter's display• Heavy duty & compact housing case• Records Maximum & Minimum
readings with recall• Data hold• Auto shut off saves battery life• Low battery indicator• Dual temperature input, differential
temperature. measurement • Standard type K thermocouple input
•EMT-502•Display 13mm Super large LCD
displaydual function meter display.
Sensor Type K type thermocouple Measurement Two channel input
(T1,T2), differential temperaturemeasurement
Range -50°C to 1230°CAccuracy ±1% +1°CMemory Recall records maximum
and minimum readingsOptional Probes
TP-02A Immersion Probe -50-750CTP-03 Immersion Probe -50-1,300CTP-04 Touch Probe -50-400CC4 Industrial Touch -50-400C
• Photo Type Tachometer
The DT-2234B features a 5 digit LCDdisplay, fully autoranging operationand memory recall of the last reading.
•DT-2234B•Range 5 to 100,000RPMResolution 1RPMAccuracy ±1RPM, 5 to 5,000RPM
±0.05%, >5,000RPMDetecting Distance 50mm to 150mmIntegral Light Source
• Combination Laser Photo & Contact
The DT-2268 is a unique 2 in 1 LaserPhoto and Contact tachometer. Laserlight measures up to 50cm distance.
•DT-2268• UNIQUERange 5 to 99,999RPMContact 0.5 to 19,999RPMSpeed 0.05 to 1,999.9 m/minResolution 0.1RPM and 0.01 m/minAccuracy ±0.05% ±1 digitMemory last value, Max and MinPhoto Laser Light measures to 50cm
• Wide Frequency Range for MachineCondition and Vibration Monitoring
The VB-8200 is designed for quick andsimple industrial vibrationmonitoring. All industrial machineryvibrates. The level of vibration is auseful guide to machine condition.Poor balance, misalignment andlooseness of the structure will causethe vibration level increase and is asign that maintenance is required.
VB-8200 Features• Microprocessor circuit assures
maximum accuracy• Supply complete kit with vibration
sensor & magnetic base• Wide velocity range and acceleration
range• RMS & Peak measurement.• Data Hold• Separate vibration probe.• RS 232 computer interface.• Auto shut off saves battery life.• Hard carrying case include
•VB-8200•Velocity Range 200mm/s
0.5 to 199.9mm/sAcceleration Range RMS 200m/s2
0.5 to 199.9m/s2
Frequency Range 10Hz to 1kHzmeets requirements of ISO 2954
Supplied with vibration sensor andmagnetic base
Memory Recall maximum &minimum
Data Hold freezes the display valueAuto power Off saves battery lifeIncludes carry case
Ordering Code:Model VB-8200 $610 ex GST
DIGITAL THERMOMETER
VB-8200Emtek
VIBRATION METER
Ordering Code:Model DT-2268 $236 ex GST
DT-2268 Photo/ContactEmtek
Ordering Code:MD-9210 $244 ex GST
DT-2234B Photo Emtek
TACHOMETERS
Ordering Code:Model EMT-502 $202 ex GST
EMT-502 K TypeEmtek
MultiMeasure Handhelds 7
• SA Tel 8363 5733 • WA Tel 9361 4200 TOLL FREE 1800 632 953 • EMONA Instruments • 19
• For Installed Network & Patch Leads
•QUINTEST•• Displays faults at both ends• Carries out short circuit, open circuit,
pair reversal and miswire tests• Tests & verifies on 2, 3, & 4 pair
voice and data channels• Covers UTP, STP patch cables as well
as installed networks
• Indicates Which End of Link is Faulty
The LanCaster is a professionalStructured Cabling Tester and TroubleShooter designed to speed up the on-site testing of data and voice
•LanCaster•• Indicates all common wiring faults
including split pairs• Shows which end the installed link
contains the fault• Cable Length Meter, Tone Generator
& Service Indicator• Instant digital display gives
unambiguous fault indication
• With Large Back-Lit Display
The LanCaster is a professionalStructured Cabling Tester and TroubleShooter designed to speed up the on-site testing of data and voice
•LanCaster Pro•• Large 128 x 64 pixel LCD with
backlight • Indicates all common wiring faults
including split pairs• Shows which end the installed link
contains the fault• Cable Length Meter, Tone Generator
& Service Indicator
• High Performance CAT5/CAT6 Tester
The MultiLAN 350 is an affordablypriced unit for testing and certifyinghigh performance LAN networks.
•MultiLAN 350•Tests installations up to 350MHz (this
is beyond CAT6, Class E)Complete function range including
ELFEXT and PowerSUMmeasurements
Fast Autotest function with Pass/FailCommunication talk setIn-built high performance TDRCable identifiers & wire map testTime domain frequency plotsHigh resolution, high contrast displayMemory for up to 2000 autotest
results
• High Resolution & Long Range
The FaultCaster is a palm-topdigitalTDR designed to detect and locatefaults on all types of copper cable upto a distance of 2000m (6,000ft).
•FaultCaster•
• Measures distances to opens/shorts • Extended measuring range to
2000m on all cable types• Fast-Edge Step TDR technology for
improved range & Resolution• Voltage warning & test Inhibit
• Lowest Cost Graphical TDR
The TX2001 is a professional TDR andToner designed to detect and locatefaults on copper communicationcables up to a distance of 3000m
•TX2001•• 5 Measurement Ranges up to 3000m • 50, 75 & 100 ohm selectable
Impedance• Built in tone generator for pair
tracing & identification• Suitable for testing all comms cables
Ordering Code:TX2001 $837 ex GST
TX2001BI
GRAPHICAL TDR
Ordering Code:FaultCaster $466 ex GST
Ordering Code:MultiLAN 350 Standard $2,896 ex GST
MultiLAN 350Metrel
FaultCasterBI
DIGITAL TDR
Ordering Code:Quintest $149 ex GST
LanCasterBI
Ordering Code:LanCaster $466 ex GST
LanCaster ProBI
Ordering Code:LanCaster Pro $707 ex GST
QuintestBI
STRUCTURED CABLINGTESTERS
SECTION INDEXStructured Cabling TestersDigital & Graphical TDRsCable Length Meter
Data & Telecoms Testing8
20 • EMONA Instruments • • NSW Tel 9519 3933 • VIC Tel 9889 0427 • QLD Tel 3392 7170
• Operation Up To 3,500m
The TX2002 is a professional TDR andToner designed to detect and locatefaults on copper communicationcables up to a distance of 3500m
•TX2002•• 5 Measurement Ranges up to 3500m • 50, 75 & 100 ohm Selectable Cable
Impedance• Built in Tone Generator for pair
tracing & identification• Suitable for testing all
communications cables
• Operation Up To 6,000m
A 6km cable run can be scanned inseconds, allowing the operator a viewof the cable run and arriving quicklyto the fault
•TX2003•• 0.5mtr dead Zone• Selectable Cable Impedance• Warble Tone Generator• Rapid Fault Location• Large 128x64 LCD with Backlight
• With Auto Fault Location Feature
The TX4000 is a hand held TDR with11 range scales covering the range 0-4000 meters, with a 7 mater firstrange scale and a 0.5 meter deadzone near and far end faults areclearly displayed on its 128x64 pixelback light Liquid Crystal Display
•TX4000•• 11 Measurement Ranges up to 4km• 25, 50, 75 & 100ohm Selectable
cable impedance• User Variable Gain Control• Built in Tone Generator for pair
tracing and identification • Suitable for testing all
communication and power cables
• Download & Analyse Traces
The TX6000 is a hand held TimeDomain Reflectometer with 11 rangescales covering the range 0-6000meters, with a 7 mater first rangescale and a 0.5 meter dead zone nearand far end faults are clearlydisplayed on its 128x64 pixel backlight Liquid Crystal Display.
USB 2.0 interface with Windowscompatible software "TraceXtra" givesthe user an option to download andanalyse saved traces to a windows PC.Also the interface allows the user toupload saved traces.
Designed for identifying and locatingfaults on all metallic cables with twoor more insulated conductors. TheTX6000 has impedance matchedcircuits for 25, 50, 75 and 100 ohmsand with velocity of propergationsettings from 1-99% (or the equivalentin feet or meters/micro second) willcover the range of power, data,communication and CCTV cables.
•TX6000•• 11 Measurement Ranges up to
6000m(6km)• 25, 50, 75 & 100ohm Selectable
Cable Impedance• Memory capacity upto 50 saved
traces• Built in Tone Generator for Pair
Tracing and Identification • Suitable for testing all
communication and power cables• USB 2.0 Interface with a Windows
compatible software TraceXtra todownload/analyse traces
• Measures reeled wire up to 9000m
•CLM33•Measurement Range 0 - 9,000mCross Section Ranges
26AWG - 500MCMBasic Accuracy ±2% of rdgResistance 0-65ohm with 1mohm res3 digit display with annunciators.Measurement METERS(m) or FEET(ft)Direct Readout for both COPPER(Cu)
or ALUMINUM(Al)wireResistance Range for milliohm
measurementsCalibration standard wire includedIncludes Kelvin clips (test leads)
Ordering Code:CLM-33 $399 ex GST
CLM-33Finest
CABLE LENGTH METER
Ordering Code:TX6000 $1,581 ex GST
TX6000BI
Ordering Code:TX4000 $1,394 ex GST
TX4000BI
Ordering Code:TX2003 $1,301 ex GST
TX2003BI
Ordering Code:TX2002 $930 ex GST
TX2002BI
Data & Telecoms Testing 8
• SA Tel 8363 5733 • WA Tel 9361 4200 TOLL FREE 1800 632 953 • EMONA Instruments • 21
• Accurately Indicates Cable Depth
The Protovale P700 is a live cabledetector, which gives an indication ofcable depth.
It can save you time and money byavoiding unnecessary excavation. Thislightweight and rugged live cabledetector has one control knob for allfunctions and a clear analogue meterto help estimate cable depth.
P700 Highlights• Saves excavation time - the
Elcometer P700 live cable detector isused to find current carrying cables,their direction and their depth downto 5 metres
• Easy to use - designed without anyunnecessary extras. ONE controldoes it all!
• Clear audio signal - a peak in thesignal accurately locates the livecable so its orientation can bedetermined
•P700•Frequency 50HzSensitivity 4mA/mDetection Range down to 5mAnalog Needle indicates cable depthAudio Signal for cable orientationPower Supply 1 x 9V Battery
• Advanced Locator & Transmitter
The PL-2000 offers a new approach inhigh power, low frequency location.With 3 active frequencies, 0.5kHz,8kHz, and 27kHz and 2 passivefrequencies, 50/60Hz, as a Live Cabledetection mode and both inductiveand direct connection capabilities, thePL-2000 is powerful and versatile.
Can trace and locate any continuousmetal such as iron, steel, and copperwater lines, gas lines, tracer wire byplastic pipe, telephone/TV cables,copper and aluminum wire, conduitand power lines.
Max depth 5m. Runs on 6D cellbatteries-Transmitter and 6 AAbatteries-Receiver. Comes withPadded Case Transmitter, Receiver,manual and Conductive Clips.
PL-2000 can also locate a power livecable without the transmitter usingPassive 50/60 mode. Push buttondepth measurement.
•PL-2000•Detectable Depth over 2mLocating Distance up to 600mDigital Display with Bar-GraphSingle & Differential Coil Antennas
for tracking cable distance anddepth
Frequency 27kHz, 8kHz, 0.5kHzOperation Modes
Without Transmitter AC PowerMode for locating live cablesWith Transmitter inductive mode,direct connection mode and clamp
Transmitter Output 0.5W Induction Mode3.0W DIrect Mode
Battery Life more than 8 hoursOptional Induction Clamp unique
feature clamp does not need tofully enclose around conductor
• Universal Tracing & Locating System
The MI-2093 Line Tracer is anaccurate wire and cable tracingsystem for energised and non-energised circuits.
MI-2093 Applications• Tracing cables in walls, ceilings, floor
and ground.• Tracing live or voltage free cables.• Locating cable interruptions and
short-circuits in cables.• Locating concealed sockets and
distribution boxes.• Locating fuses and assignment to
circuits.• Determining an individual wire in a
bundle of wires.• Tracing pipe installations and other
conductive
MI-2093 Highlights• Detection depth up to 2 m can be
achieved.• Works on both, energized and non-
energized systems.• The highly sensitive Receiver R10K
detects the injected signal aroundthe measured line or object.
• Three levels of sensitivityadjustment: low, middle and high.Each level can be additionallyprecisely adjusted.
• Dual, bar-graph and buzzer indicatoroffers easy indication in dark andnoisy environment.
Ordering Code:MI-2093 Line Tracer $605 ex GST
MI-2093 Line TracerMetrel
CABLE TRACING &LOCATING
Ordering Code:PL-2000 $4,980 ex GST
PL-2000Fuji-Tecom
Ordering Code:P700 $799 ex GST
P700 Live Cable LocatorProtovale
UNDERGROUND CABLELOCATORS
SECTION INDEXUnderground Cable LocatorsCable Tracing & Locating
Cable Locating9
22 • EMONA Instruments • • NSW Tel 9519 3933 • VIC Tel 9889 0427 • QLD Tel 3392 7170
• Robust, Portable, Plastic Case
•MA-2060•Insulation Resistance
500kohm, 500GohmVoltage 500, 1000, 2500, 5000V DCCurrent approx. 1.3mAVoltage Range 0-600V AC/DCDC Voltage Input Resistance
3MohmAC Voltage Input Resistance
1.35Mohm
• High Voltage Diagnostic Tester
•MI-2077 TeraOhm•Resistance 0.01Mohm - 5Tohm
Test Voltage 250V - 5000V, 50V stepsBar Graph 0 - 5TohmWithstanding Test Voltage 0 - 5500VLeakage Current Range 0 - 1.4mAVoltage AC/DC 0 - 600VInput Resistance 3MohmCapacitance 0 - 50uFPI & DD Range 0 - 99.9
• Measuring Range up to 10Tohm
•MI-3200 10kV•Resistance up to 10TohmTest Voltage 500V up to 10,000V in
steps of 25VAuto-Calibration of measuring
system every time after turningpower on
Power operates from mains orrechargeable batteries
Display digital and bar graph displayshows results with date and time
Auto discharge of capacitive loadsInterface RS 232 or USB
• Portable with Data Logging
•MI-3250•Bi-directional Resistance
Measurement from 0,1 μΩ up to2000 Ω with test current up to 10 A;
Overvoltage Protection 300 V CATIV,allows measurement insubstations& other points with low resistance
Internal Protection Circuit protectsuser from connection to lines
Custom Limits can be set for PASS /FAIL evaluation of test result
Memory up to 1000 test results
• High Accuracy & Resolution
•MI-3252•Resistance Measurement 10 μΩ to
20 Ω with high accuracy 0.25 % ofreading and resolution down to1nΩ
Test Current 100mA to 100AVoltage Drop MeasurementMemory up to 1000 test results
• Indicators for Confirming Up To 33kVon Earthed Neutral Systems.
KD1E Series Digital Versions• Use to determine presence of
voltage or as a voltmeter• Provides direct reading of voltage
measurements• Low battery indicator
KD1E Series Neon Versions• Duplicate neon indicators within
shock resistant sleeves• Permanently connected earth cable• Hand guards on all elements• Direct access to vertical or horizontal
metal clad switch gear
Ordering Code:Digital Readout UnitsKD1E/15D 15KV MAX $2,955 ex GSTKD1E/33D 33KV MAX $3,114 ex GSTNeon Indicator UnitsKD1E 1KV-11.5KV $1,258 ex GSTKD1E/19 1.5KV-19KV $1,338 ex GSTKD1E/22 3KV-22KV $1,417 ex GSTKD1E/33 3KV-33KV $1,573 ex GST
KD1E SeriesSeaward
HIGH VOLTAGEINDICATORS
Ordering Code:MI-3252 with Software $5,691 ex GST
MI-3252 100AMetrel
Ordering Code:MI-3250 with Software $2,978 ex GST
MI-3250 10AMetrel
MICRO-OHM TESTERS
Ordering Code:MI-3200 $3,271 ex GSTA1275 HVLink $185 ex GST
MI-3200 10kVMetrel
Ordering Code:MI-2077 TeraOhm $2,024 ex GSTA1056 TeraLink $185 ex GST
MI-2077 5kV / 5 TohmMetrel
Ordering Code:MA-2060 $2,312 ex GST
MA-2060 5kV AnalogMetrel
HIGH VOLTAGE INSULATION TESTERS
• SA Tel 8363 5733 • WA Tel 9361 4200 TOLL FREE 1800 632 953 • EMONA Instruments • 23
SECTION INDEXHigh Voltage Insulation TestersMicro-Ohm TestersHigh Voltage Indicators
High Voltage Testing10
• Measures Watt True Power andPower Factor
The DW-6163 gives a direct reading ofAC WATT (true power) value. The unitprovides precision measurement ofTRMS AC V, TRMS AC A, WATT andPower Factor.
•DW-6163•
True Power MeasurementTRMS AC V 0 - 600V ACTRMS AC A 0 -10A ACWATT 0 to 6000W, 1W ResolutionPower Factor 0.01 to 1.00 AC V/AC A Frequency Response
40 to 400HzDisplay Large LCD, Dual Display,
BacklightMax. Indication 9999Over Input IndicationZero Automatic AdjustmentData HoldMemory Recall Max & Min Value
• Professional, Full Feature Analyser
The MI-2892 Power Master is a hand-held three phase power quality ana -lyser with a large easy-to-readgraphical colour display enabling theuser to detect harmonics, phasorsand waveforms anomalies in theinstallation simply by con necting thedevice. The instrument is designed fora long term recording as well as fortroubleshooting power qualityproblems in three-phase and single-phase power distribution systems.
MI-2892 Power Master Features• Voltage: TRMS, peak, crest factor
(4-channel);• Current: TRMS, peak, crest factor
(4-channel);• Power (active, reactive, apparent);• Power measurements fully
compliant with IEEE 1459 (active,nonactive, fundamen tal, harmonic,load unbalance);
• Unbalance, flicker measurement;• Harmonic and interharmonic
analysis up to 50th harmonics, THDmeasurement;
• Energy (active, reactive, generated,consumed);
• Capturing and recording of powersupply events (shutdowns,interruptions, swells, dips);
• Inrush currents monitoring andrecording;
• Waveform/inrush displaying,snapshot and recording;
• Transients recording;• Power quality analysis according to
EN 50160;• Recording up to 7 adjustable alarms;• Temperature measurement;• Power factor cos ϕ.
• Affordable, High Quality Analyser
The MI 2885 Master Q4 is an idealtroubleshooting tool. The recordersare designed to automatically recordall important data and waveforms ofvoltage events like Dips and Swells. Inaddition the user can set 7 optionaltriggers for capturing waveforms ofselected quantities. A large easy-to-read graphical colour display enablingthe user to detect harmonics, phasorsand waveforms anomalies in theinstallation simply by connecting thedevice.
MI-2885 Features• 4-voltage channels with wide
measurement range: 0 ... 1000 Vrms(CAT III / 1000 V);
• 4-current channels with support forautomatic clamp recognition and“on instrument“ range selection;
• Automatic Smart Clamp detectionand Smart Clamp range selection;
• Compliance with power qualitystandard IEC 61000-4-30 Class S;
• Complete power quality analysisaccording to EN 50160 includingsignalling and interharmonics;
• Support for microSD memory card(8-GB supplied with the instrument)up to 32GB;
• Color-coded input terminals andterminal labels
• Intuitive main menu and large iconsthat makes the equipment very easyto navigate and configure;
• Powerful PC SW PowerView3enables downloading, view, analysisof recorded data and professionalreport creation;
• Flexible clamps (without additionalpower supply) are included
• Remote communication via Ethernet(GPS clock synchronization - opt)
MI-2885Metrel
Ordering Code:MI-2892-Power Master $5,458 ex GST
MI-2892Metrel
HANDHELD POWERQUALITY ANALYSERS
Ordering Code:DW-6163 $229 ex GST
DW-6163Emtek
HANDHELD WATT METER
Ordering Code:MI-2885 EU $4,520 ex GST
SECTION INDEXHandheld Watt MeterHandheld 3 Phase Power AnalysersFlexible Clamps
Power Quality Analysers11
24 • EMONA Instruments • • NSW Tel 9519 3933 • VIC Tel 9889 0427 • QLD Tel 3392 7170
• Powerful Entry Level Analyser
The MI 2883 Energy Master serves asa perfect tool for long term loggingand later post processing of recordeddata. Large easy-to-read graphicalcolour display enabling the user onsite analysis and data checks. Thehandy Quick Set buttons makes theinstrument more user friendly andare allowing faster data overview.Advanced PC SW packagePowerView3 enables detailed analysisof recorded data, direct reading fromthe microSD memory card, analysis oflong term records and automaticcreation of professional test report.
MI-2883 Features• 3-voltage channels with wide
measurement range: 0 ... 1000 Vrms(CAT III / 1000 V);
• 4-current channels with support forautomatic clamp recognition and“on instrument“ range selection;
• Automatic Smart Clamp detectionand Smart Clamp range selection;
• Compliance with power qualitystandard IEC 61000-4-30 Class S;
• Complete power quality analysisaccording to EN 50160 includingsignalling and interharmonics;
• Support for microSD memory card(8-GB supplied with the instrument)up to 32GB;
• Color-coded input terminals andterminal labels
• Intuitive main menu and large iconsthat makes the equipment very easyto navigate and configure;
• Powerful PC SW PowerView3enables downloading, view, analysisof recorded data and professionalreport creation;
• Flexible clamps (without additionalpower supply) are included
• High Measuring Accuracy• Single & Three Phase Models
Metrel’s range of flexible clamps suitMetrel or third party instrumentsinstruments such as DMMs, scopes,and power analysers. Innovativefeatures include over - rangeindication, Auto - detection function, 3measuring ranges, IP 64 protectionand high measurement accuracy.
HIGHLIGHTS• Over-range LED indication• Waterproof sensor IP 64• High accuracy (1%) with a total
rejection of DC component• Wide frequency 10 Hz to 8kHz• Electronic module is either mains or
battery charged
•A1287• Single PhaseAC A 30A/300A/3000A
•A1179• Three PhaseAC A 20A/200A/2000A
•A1257• Three PhaseAC A 30A/300A/3000A
Common SpecificationsLoad Impedance >10kohmAccuracy ±1%Linearity ±2%Frequency Range 10Hz - 8kHzOver-Range IndicationSensor Length 48cmSensor Cable Diameter 14mmMaximum Cable Diameter 15cmCable Length 1mCategory Rating CAT III/1000VSensor IP Protection IP64Electronics IP Protection IP40Power mains or rechargeable
batteries
MI-2883Metrel
Ordering Code:A1287 $391 ex GSTA1179 $831 ex GSTA1257 $831 ex GST
A1000 SeriesMetrel
FLEXIBLE CLAMPS
Ordering Code:MI-2883 EU $2,965 ex GST
Power Quality Analysers 11
• SA Tel 8363 5733 • WA Tel 9361 4200 TOLL FREE 1800 632 953 • EMONA Instruments • 25
• 70MHz, 100MHz, 150MHz & 200MHz• Up To 5 Hours Battery Operation
Micsig combine advanced features inan affordable package, making themdeal for field service applications.
•MS-207T• 70MHz•MS-210T• 100MHz•MS-215T• 150MHz•MS-220T• 200MHzSampling Rate 1GS/s Memory Depth 240Kpts Channels 2 oscilloscope,1 multimeterTrigger Types edge, pulse, logic,
serial bus (UART,LIN,CAN,SPI,I2C),1553B, 429
Automatic Measurements 31 types FFT Rectangular, Hamming,
Blackman-Harris, Hanning Serial bus trigger supportDisplay 5.7 inch TFT LCD touch screen Resolution 640*480 Interfaces Mini USB2.0 connect to
PC, USB2.0 connect to flash disk Multimeter
Measurement Types 10 physicalmeasurements Measurement Display max,average, min, values with timestamp,relative measurement
Data Logger multimeter andoscilloscope measurements
Logger time length max 17 daysBattery Capacity work time 4~5hrsDimensions 254mm*160mm*60mm
• For Safe Measurements in HighPower Applications
The MS-300 series offer isolatedinputs for safely carrying out floatingmeasurements in power controlcircuits where voltages and currentmay be large, such as motorcontrollers, uninterruptible powersupplies, and industrial equipment.
•MS-310IT• 100MHz•MS-320IT• 200MHz
Sampling Rate 1GS/sMemory Depth 240Kpts Channels 2 oscilloscope,1 multimeter
channel Max Voltage Input 600V CATII 300V
CATIIIFloating Voltage from CHs to GND
1000V CATII 600V CATIIIDynamic Record max 2 hours Waveform Storage internal
waveform storage and flash diskstorage
Trigger Types edge, pulse, logic,serial bus (UART,LIN,CAN,SPI,I2C),1553B, 429
Automatic Measurements 31 types FFT Rectangular, Hamming,
Blackman-Harris, Hanning Display 5.7 inch TFT LCD touch screen Resolution 640*480Interface Mini USB2.0 connect to PC
USB2.0 connect to Flash disk Multimeter Data Logger Battery 4~5 hours Size 254mm*160mm*60mm
• For Accurate Current Measurements
Clamp–on current probes or “currentclamps” enable you to measurecurrents without breaking the electriccircuit. Current clamps are designedwith jaws that can be opened, placedaround the conductor and clampedclosed to form a magnetic looparound the conductor.
Current clamps offer a safe,cost–effective, simple and accurateway to take current measurements
•TA-189•30 A AC/DC current probe, BNC
connector
•TA-018•60 A AC/DC current probe, BNC
connector
•TA-019•600 A AC/DC current probe, BNC
connector
•TA-167•200 A / 2000 A AC/DC current probe,
BNC connector
NOTEVisit www.emona.com.au for details
on our wide range of benchtop oscilloscopes
Ordering Code:TA-189 $705 ex GSTTA-018 $216 ex GSTTA-019 $216 ex GSTTA-167 $392 ex GST
TA SeriesPico
CURRENT PROBES
Ordering Code:MS-207T $863 ex GSTMS-210T $948 ex GSTMS-215T $980 ex GSTMS-220T $995 ex GST
Ordering Code:MS-310IT $1,810 ex GSTMS-320IT $1,937 ex GST
MS-300 SeriesMicsig
ISOLATED INPUTOSCILLOSCOPES
MS-200 SeriesMicsig
HANDHELDOSCILLOSCOPES
SECTION INDEXHandheld OscilloscopesCurrent Probes
Handheld Oscilloscopes12
26 • EMONA Instruments • • NSW Tel 9519 3933 • VIC Tel 9889 0427 • QLD Tel 3392 7170
• Verify Installation TestingInstruments
• Comply with AS/NZS3017
The Metrel CS-2099 makes regularcalibration checks of your testequipment quick and easy withsimple field calibration of the themost frequently used functions fortesting and verifying electricalinstallations.
CS-2099 Features• Insulation calibration up to 1000V• Continuity function calibration• Fault loop impedance calibration
with RCD trip-lock function• Calibration of RCD trip-out time
measurement• Line impedance calibration• Voltage and frequency calibration• Measurement of leads verification• PE test terminal functional
verification• Automatic mains polarity verification
•CS-2099•Insulation Resistance Reference
Value 2MΩ ±1% and 50MΩ ±1%Low Resistance Reference Value
0.5Ω ±2%, 5Ω ±2% and 15Ω ±2%Voltage & Frequency Reference
Value 50.0V@240V AC, ±5%Fault Loop & Line Impedance
1.2Ω ±0.2Ω, 11.0Ω ±0.5ΩRCD Trip Out Time Simulation &
Current MeasurementPower 240V AC mains voltage
• Calibrates Full Range Of ContractorsTools
A precision instrument designed tocalibrate RCD, loop, insulation, earthtesters and multifunction installationtesters. The 5030 accurately simulatesRCD trip times and measures currentsproduced by RCD testers. It replicatesloop impedance and auto adjusts forlocal line impedance. It also providesinsulation resistances and measurestest voltages and currents.
5030 Features• RCD: 3 - 2500mA, 10 - 2000ms• Loop 50mΩ to 1.8kΩ• Insulation up to 2GΩ / 1kV• Continuity 0.1Ω to 10kΩ• RS-232 / USB Control• Fast and intuitive user interface• EasyCal software compatible
•5030•Loop Impedance Tester Calibrator
Resistor Values 1800, 330.0, 180.0,33.00, 18.00, 3.300, 1.800, 0.330,0.150 and 0.050ΩLocal Loop Compensation0 to 9.999ΩTest Current40A max (200ms) / 50W max
RCD Tester CalibrationTrip Time 10, 20, 30, 40, 50, 60, 80,100, 300, 500, 1000, 1500, 2000msTrip Current 6.000, 10.00, 30.00,100.0, 300.0, 500.0, 1000mACurrent Multipliers x0.5, x1, x2, x5Maximum Current 2500mA
Insulation Tester Calibrationup to 2GΩ / 1kV
Continuity 0.1Ω to 10kΩLine Voltage 200.0 to 260.0V RMSLine Frequency 45.00 to 65.00Hz
• Combined Source & Measurement• Thermocouples, PT100s, μV, mV, mA
The 1090 is a precision portableprocess calibrator that combinessource and measurement functionsfor thermocouples, PT100s, μV, mV &mA. As a multifunction instrument the1090 combines accuracy anddurability with simple operation,making it ideal for process plantapplications.
1090 Features• Thermocouple Measurement and
Simulation• Cold Junction Compensation• PT100 Measurement and Simulation• Measurement and Source (μV, mV,
and mA)• Temperature Units Selection• 24V Process Loop Drive Mode• Memory Recall and Step/Auto-Step
Functions
•1090•Thermocouple Measurement &
SimulationJ, K, T, R, S, B, N, EThermocouple Accuracy 0.1deg CmV Measurement 0-±30mVmA Measurement 0-±60mAmV Source 0-±80mV spanmA Source 0-80mA spanPT100 Simulation 14 set temperature
pointsPT100 Measurement -200 - 700deg CProcess Loop 4-20mA and 0-50mA24V/60mA Process Loop DriveMemory 10 point recall
Ordering Code:1090 $3,437 ex GST
Ordering Code:5030 $9,186 ex GST
1090Time Electronics
TEMPERATURE &PROCESS CALIBRATOR
5030Time Electronics
INSTALLATION TESTERBENCH CALIBRATOR
Ordering Code:CS-2099 $499 ex GST
CS-2099Metrel
INSTALLATION TESTERFIELD CALIBRATOR
• SA Tel 8363 5733 • WA Tel 9361 4200 TOLL FREE 1800 632 953 • EMONA Instruments • 27
SECTION INDEXInstallation Tester CalibratorsProcess Calibrators
Calibrators13
• Testing & Simulation of Transducers
A multi-purpose handheld testinstrument that can be used as anadjustable current load, adjustablepower supply, or precision currentsource.
The 1077 is commonly used for thetesting and simulation of milliamptransducer systems. Compact andrugged design make the 1077 idealfor use in both the lab and field, withprotective rubber cover to increasedurability. The instrument is built towithstand arduous use, meaning it iswell suited to process controlapplications.
1077 Features• 3 operating modes• 100mA source and load• 24V line mode• 0.02% accuracy• Safety terminals• Battery level indicator• Supplied with protective cover
•1077•Current Load 0-100mA in 3 ranges
0-99.99mA in 10μA steps0-9.999mA in 1μA steps0-999.9μA in 0.1μA steps
Voltage Output 14V to 40V, 100mAcurrent limit
24V Line ModeCurrent Output 0-100mA in 3 ranges
0-99.99mA in 10μA steps0-9.999mA in 1μA steps0-999.9μA in 0.1μA stepsAccuracy 0.05% of setting
• For Simulation & Test Applications• High 0.02% Accuracy
A portable instrument that operatesas a current and voltage source and amulti-purpose loop calibrator. Highperformance and simple operationmake it suitable for R&D, service,process control engineers, andcalibration technicians. As a versatilehandheld calibrator, the source andmeasure capabilities with 0.02%accuracy mean the 1048 is a compactsolution for most simulation and testapplications.
1048 Features• Source/measure current & voltage • 3 Source ranges to 22mA or 22V• 3 Measure ranges to 70mA or 50V• Transmitter simulator/sink• Output steps and ramps• Fine adjustment (inching)• Accuracy 0.02% of span
•1048•Voltage Output 0-22V in 3 rangesVoltage Measurement 0-50VCurrent Source 0-22mA in 3 rangesCurrent Measurement 0-70mATX Sim 2 wire transmitter simulationDisplay 4.5 digitAccuracy 0.02% of span
• Loop Calibrator, Source & Indicator• Low Cost, Easy to Use
The 7006 is a single function low-costpocket sized unit, designed for testand calibration of process loops Justselect 4 - 20mA or 10V loop, andTxSim, RxTest, or 0 to 10V DCsimulation mode.
For loop signal checking 7007 is a loopsignal indicator An engineer can thenmove to another location to checkthat the signal is arriving correctly andis within specification. Once againselect the loop type, 4 - 20mA, or 0 -10V, and whether you want thedisplay in direct units, or % of span.The LCD display shows the signal toan accuracy of 0.05% either in mA, V,or % of span.
•7006• SimulatorRange 4-20mA, or 10VSet-Points 0, 10, 25, 50, 75, 90, 100%
of spanAccuracy 0.1%Modes TxSim, or TXTestLoop Supply Internal, 25mA maxAuto-Step Up/Down/Up, 0.5, 1, 2, 4 or
8sec/stepPower PP3 battery, typical life 40hrs
•7007• Signal IndicatorRange 4-20mA, or 0-10V, 0-50VDisplay LCD 4 digits, mA, V or % of
spanAccuracy 0.05%Modes RxSim, TxTest, or 50mA/50VLoop Supply Internal, 25mA maxPower PP3 battery, typical life 40hrs
Ordering Code:7006 $504 ex GST7007 $440 ex GSTOrdering Code:
1077 $2,559 ex GST
7000 SeriesTime Electronics
LOOP CALIBRATORS
Ordering Code:1048 $1,267 ex GST
1048Time Electronics
VOLTAGE/CURRENT/LOOPCALIBRATOR
1077Time Electronics
TRANSDUCER SIMULATOR
Calibrators13
28 • EMONA Instruments • • NSW Tel 9519 3933 • VIC Tel 9889 0427 • QLD Tel 3392 7170
• Cost effective, traceable calibrationsolution
In many service and maintenanceenvironments, test equipment usedfor making measurements must bechecked periodically to ensure thereliability of readings.
Emona’s primary calibrationequipment includes a TimeElectronics AC/DC calibrator with15ppm basic accuracy, and Prema 8.5digit DMM with 0.5ppm stability.
DMM calibration AC V, DC V, AC A,DC A and Ohms range pricing:
Insulation tester calibrationpricing:
RCD tester calibration pricing:
Multi-function installation testerpricing:
A full report of test detailing appliedvalues and reading taken is available,if required for $66.
• Covers All Seaward Testers• Regular Calibration of Testers is
Required under AS/NZS3760
Regular calibration of your portableappliance tester is a requirement ofAS/NZS3760. Verification of yourinstrument’s measurements ensuresthat users can confidently Pass or Failelectrical equipment used at a placeof work.
Emona’s calibration service isprofessional and cost effective. Allequipment used has been tested by aNATA recognised laboratory.Calibrated PAT testers are suppliedwith a Statement of Compliance.
PAT tester calibration on EarthBond, Insulation Resistance,Class I Leakage, Class II Leakage,Sub-Leakage, Load, Polarity ispriced as follows:
Full report of test detailing appliedvalues and readings taken is available,if required, at $89 inc GST.
• Download from www.emona.com.au• Include with All Submited Jobs
All Returns to be Accompanied byan Emona Service Order FormPlease include an Emona ServiceOrder Form with all service andcalibration requests, includingthose accompanied by an officialPurchase Order.
Account Customers All accountcustomers, such as governmentdepartments, hospitals,educational institutions etc, mustinclude an official Purchase Orderwith the Service Order Form.Service and calibration jobs cannotbe completed without an officialPurchase Order.
Pre-Paid or Non-AccountCustomers Customers withoutaccount terms, i.e. “Pre-Paid”customers, should provide creditcard details on the Service OrderForm to guarantee faster jobprocessing turnaround times.Credit card payments arepreferable to EFT as EFT paymentsrequire next day confirmation.
Minimum Charge A minimum chargeof $65 ex GST applies for all repairsor for any maintenance requiredsuch printer re-programming, logoinstallation etc.
Turnaround Times A typicalturnaround time of 7 working daysapplies for calibrations and repairs.Repair turnaround times can beaffected by parts availability.
Booking of Priority Jobs Priorityrepair and calibration jobs must bepre-booked in advance.
Installation Testers Price*each*Incl GST and subject to change without notificationBasic & Logging Type $231
Terms & ConditionsEmona
SERVICE & CALIBRATIONBOOKING FORM
PAT Model Price*each*Incl GST and subject to change without notificationPT125 $121PAC500 $121PAC3760 $121PAC3760 Plus/Plus II/DL $198PrimeTest 200 $231
PrimeTest Elite $297PrimeTest 300 $297PAT1000S $165Europa $297Europa-XE $275Europa-Plus $297Maestro $297Supernova $297Supernova-XE $275Supernova-Plus $297
PAT Tester CalibrationEmona
APPLIANCE TESTERCALIBRATION
RCD Tester Price*each*Incl GST and subject to change without notificationBasic & Logging Type $121
Insulation Tester Price*each*Incl GST and subject to change without notificationUp to 1kV $121
DMM Type Price*each*Incl GST and subject to change without notification3.5/3.75/4.5 digit $1215.5 digit $150
Electrical InstrumentsEmona
INSTRUMENTCALIBRATION
• SA Tel 8363 5733 • WA Tel 9361 4200 TOLL FREE 1800 632 953 • EMONA Instruments • 29
SECTION INDEXInstrument CalibrationAppliance Tester CalibrationService & Calibration Booking Form
Calibration Services14
SYDNEY (Head O ce)78 Parramatta RdCamperdown NSW 2050Tel: 02 9519 3933Fax: 02 9550 1378
MELBOURNE1206 Toorak RdCamberwell VIC 3124Tel: 03 9889 0427Fax: 03 9889 0715
PERTH63 Shepperton RdVictoria Park WA 6100Tel: 08 9361 4200Fax: 08 9361 4300
BRISBANE1019 Ipswich RdMoorooka QLD 4105Tel: 07 3392 7170Fax: 07 3848 9046
ADELAIDE3/26 The Parade WestKent Town SA 5067Tel: 08 8363 5733Fax: 08 8363 5799
GROUP WEBSITESTest & Measurement: www.emona.com.auTesting & Tagging: www.protag.com.au Installation Testing: www.instaltest.com.auTIMS Telecoms Trainer: www.tims.com.au
EMONA Instruments Pty Ltd
www.emona.com.au