Floors-public AreasCleaning Manual Eng- Ver

7/26/2019 Floors-public AreasCleaning Manual Eng- Ver

http://slidepdf.com/reader/full/floors-public-areascleaning-manual-eng-ver 1/7

Public Areas Cleaning Manual


Prepared For

Prepared By





1-

Remove the dust

2-

Brush with R2 solution for sticky dirt ‘manual or

by machine”

3-

Clean the water out

1-

Remove the dust

2-

Brush with R2 solution for sticky dirt ‘manual or

by machine”

3-

Clean the water out

Hard Surfaces –

Ceramic Tiles

Safety & Hygiene





1- Remove the dust

2- Apply Jontec Tensol or Taski 300 or Jontec Secure

solution

3- let the solution to be semi dried for 5 to 10 min

4- buffing with the white pad

1- Remove the dust

2- Apply Jontec Tensol or Taski 300 or Jontec Secure

solution

3- let the solution to be semi dried for 5 to 10 min

4- buffing with the white pad

Hard Surfaces –

Marble and Garnet daily Maintenance

Safety & Hygiene



Public Areas Cleaning ManualPublic Areas Cleaning Manual

1- Remove the dust or sticky dirt with R2 solution for HK

Or Suma Light D12 for Stewarding

2- Rinse with water then dry the surface with dump cloth

3- Use clean dump cloth to spray Suma Inox solution

4- buff the surface in cycle action to polish it

1- Remove the dust or sticky dirt with R2 solution for HK

Or Suma Light D12 for Stewarding

2- Rinse with water then dry the surface with dump cloth

3- Use clean dump cloth to spray Suma Inox solution

4- buff the surface in cycle action to polish it

Stainless steel Surface

Not used for food contact or heated stainless steel surfacesNot used for food contact or heated stainless steel surfacesSafety & Hygiene



Public Areas Cleaning ManualPublic Areas Cleaning ManualCarpet Floors –

Wet Shampooing

Safety & Hygiene

1- Remove any removable furniture, sticky gum, and stains .2- Test colour-fastness and material compatibili ty.3- Start at the furthest point f rom the door, switch on the foamgenerator. Wait until foam comes out of the brush.4- Move on the carpet to be cleaned, work backwards in lanesmoving the machine in circular motions sideways. Do not overwet the carpet.

5- Fill clean water into the fresh water tank of the sprayextraction machine. Clean immediately the carpet working inoverlapping lanes. Use an antifoam product i f foam develops6- Lift the carpet piles with a carpet pile brush or rake. Allowthe carpet to dry thoroughly. Drying time between 8 to 24 hoursbefore walking on the carpet

7- Empty the water tank of the single disc machine, empty thefresh water and recovery tank of the spray extraction machine.Rinse the brush and tanks with clean water. Clean themachines and the cable with a moist cloth. Wind the cableloosely




1-Remove any removable furniture sticky gum and stains

2-

Test colour-fastness and material compatibility

3-

Start at the furthest point from the door switch on the foam generator.

Wait until the foam comes out of the brush.

4-

Apply dry foam by working backwards in lanes moving the machine in

circular motions sideways. After applying 3 lanes work over

it again

in circular motions

5-

Lift the carpet piles with a carpet pile brush

6-

Rinse the brush edge cleaning tool and the sinter head from the

foam generator with clean water. Clean machines and cable with a

moist cloth. Wind the cable loosely.

7-

Brush vacuum the carpet thoroughly as soon carpet is dry to remove

the dirt/crystallized foam.

1-Remove any removable furniture sticky gum and stains

2-

Test colour-fastness and material compatibility

3-

Start at the furthest point from the door switch on the foam generator.

Wait until the foam comes out of the brush.

4-

Apply dry foam by working backwards in lanes moving the machine in

circular motions sideways. After applying 3 lanes work over

it again

in circular motions

5-

Lift the carpet piles with a carpet pile brush

6-

Rinse the brush edge cleaning tool and the sinter head from the

foam generator with clean water. Clean machines and cable with a

moist cloth. Wind the cable loosely.

7-

Brush vacuum the carpet thoroughly as soon carpet is dry to remove

the dirt/crystallized foam.

Carpet Floors –

Dry Shampooing

Safety & Hygiene




1-

Remove all dust or any dirt

2-

Spray Traffic Liquid wax solution

3-

Apply the single desk with red pad for 5 min each

1 Sq. meter

4 –

Apply the white pad for puffing for 5 min. each

1 Sq. meter

1-

Remove all dust or any dirt

2-

Spray Traffic Liquid wax solution

3-

Apply the single desk with red pad for 5 min each

1 Sq. meter

4 –

Apply the white pad for puffing for 5 min. each

1 Sq. meter

Wooden Floor

Safety & Hygiene

Floors-public AreasCleaning Manual Eng- Ver

Documents

Transcript of Floors-public AreasCleaning Manual Eng- Ver