Flomax (PP)filtration requirement. - Nominal retention ratings which, in combination with an...
Transcript of Flomax (PP)filtration requirement. - Nominal retention ratings which, in combination with an...
Pleated Cartridge Filter
1
Flomax (PP)
Description
Application
Specification
- Flomax 100% polypropylene media & support construction offers excellent chemical and heat resistance.
- All polypropylene components and thermal bonded manufacturing enable the smallest contaminant
- Extraction and higher durability
- Flomax filter series are manufactured in an ISO 9001 quality systems standard registered clean-room facility.
- Electronics : LCD, PDP, OLED, Rinse Solution, Electronic Material, MLCC
- Chemicals : Fine Chemicals, Solvent, Selected Acids & Bases, Paste, Ink, etc
- Semi-conductor : CMP Slurry
- Food & Beverage: Beer, Flavors, Juices, Drinking Water, Syrup, Wines, Tea
Removal Range 0.2-90µm
Material
Media Polypropylene
Support/Drainage Polypropylene
Core/Cage Polypropylene
Sealing Thermal bonding
Configuration
Length 10 / 20 / 30 / 40 inch
ID 30 / 42 / 55 / 75 mm
OD 69 / 83 / 130 / 158 mm
Max. Temperature 80°c
Max. Differential Pressure Max. 300kPa(44.0psid) @25°c
2
Flomax(PP)
Dimension
End Cap Option
EF
CDA, B
E
C
F
D
M
(Standard : 10inch / unit : mm)
Standard-H High Volume-HV
Ultra High Volume-UHV Jumbo-J
Standard H High Volume HV Ultra High Volume UHV Jumbo J
A 259.5 240.0 265.0 271.0
B 244.0 224.5 244.0 250.0
C 68.0 82.5 131.0 152.0
Pleated Cartridge Filter
3
*PO
Description
- PO cartridge series are well-suited for a broad range of fine particle and prefiltration applications where purity,
economy and reliability are critical
H
HV
4
Flomax(PP)
Ordering information
Grade Type MediaSupportMaterial
MicronRating
End-capOption
LengthO-ring
MaterialSpecialoption
E :ElectronicP :PharmaceuticalF :Food &BeverageBlank :Others
H :Standard
PO :HighPerformancePPGrade
P :Polypropylene
02 : 0.2µm04 : 0.45µm06 : 0.6µm12 : 1.2µm25 : 2.5µm45 : 4.5µm60 : 6.0µm11 : 10.0µm22 : 20.0µm33 : 30.0µm55 : 50.0µm
A : 250mm DOEB : 254mm DOEC : 2-222 O-ring /
Flat EndD : 2-226 O-ring /
Flat EndE : 2-222 O-ring /
Fin EndF : 2-226 O-ring /
Fin EndM : 2-222 O-ring
/Flat End
1 : 10”2 : 20”3 : 30”4 : 40”
E : EPDMN : Buna-NS : SiliconeV : Viton2)
T : TEV1)
C :DI cleaningV :VacuumPackageS :SUS ringInsertion
V :HighVolume
D : 2-226 O-ring /Flat End
M : 2-222 O-ring /Flat End
1 : 10” C :DI cleaningV :VacuumPackage
U :Ultra HighVolume
12 : 1.2µm25 : 2.5µm45 : 4.5µm11 : 10.0µm22 : 20.0µm33 : 30.0µm55 : 50.0µm
K : 334 O-ring 1: 10” E : EPDMT : TEV1)
J :Jumbo
H :Pleated
02 : 0.2µm11 : 10.0µm22 : 20.0µm33 : 30.0µm55 : 50.0µm
H : Horizontal-non-core type
V : Vertical-non-core type
1 : 10”2 : 20”4 : 40”6 : 60”
E : EPDMN : Buna-NS : SiliconeV : Viton2)
UHV
※ Test conditions : Water 20.0°c / 1cP fluid
1) TEV : Teflon2) Encapsulated Viton2)
2) Teflon and Viton are trademarks of DuPont
Pleated Cartridge Filter
5
H
HV
*CO
Description
- CO cartridge series are provided long lifecycle and are available in a wide selection of micron rating to meet client’s
filtration requirement.
- Nominal retention ratings which, in combination with an integral, multilayer construction, offer outstanding filtration
performance.
6
Flomax(PP)
Ordering information
Grade Type MediaSupportMaterial
MicronRating
End-capOption
LengthO-ring
MaterialSpecialoption
E :ElectronicP :PharmaceuticalF :Food &BeverageBlank :Others
H :Standard
CO :HighPerformancePPGrade
P :Polypropylene
03 : 0.3µm06 : 0.6µm12 : 1.2µm25 : 2.5µm50 : 5.0µm22 : 20.0µm33 : 30.0µm55 : 50.0µm
A : 250mm DOEB : 254mm DOEC : 2-222 O-ring /
Flat EndD : 2-226 O-ring /
Flat EndE : 2-222 O-ring /
Fin EndF : 2-226 O-ring /
Fin EndM : 2-222 O-ring
/Flat End
1 : 10”2 : 20”3 : 30”4 : 40”
E : EPDMN : Buna-NS : SiliconeV : Viton2)
T : TEV1)
C :DI cleaningV :VacuumPackageS :SUS ringInsertion
V :HighVolume
D : 2-226 O-ring /Flat End
M : 2-222 O-ring /Flat End
1 : 10” C :DI cleaningV :VacuumPackage
U :Ultra HighVolumev
12 : 1.2µm25 : 2.5µm50 : 5.0µm33 : 30.0µm55 : 50.0µm
K : 334 O-ring 1 : 10” E : EPDMT : TEV1)
※ Test conditions : Water 20.0°c / 1cP fluid
1) TEV : Teflon2) Encapsulated Viton2)
2) Teflon and Viton are trademarks of DuPont
UHV
Pleated Cartridge Filter
7
*PL
Description
- PL cartridge series offer long performance compared to PO Series due to their multiple layered construction
H
H
HV
8
Flomax(PP)
Ordering information
Grade Type MediaSupportMaterial
MicronRating
End-capOption
LengthO-ring
MaterialSpecialoption
E :ElectronicP :PharmaceuticalF :Food &BeverageBlank:Others
H :Pleated
PL :Long PerformancePPGrade
P :Polypropylene
12 : 1.2µm20 : 2.0µm30 : 3.0µm45 : 4.5µm11 : 10.0µm22 : 20.0µm33 : 30.0µm55 : 50.0µm99 : 90.0µm1H : 100.0µm
A : 250mm DOEB : 254mm DOEC : 2-222 O-ring /Fin EndD : 2-226 O-ring /Fin EndE : 2-222 O-ring /Fin EndF : 2-226 O-ring /Fin EndM : 2-222 O-ring /Fin End
1 : 10”2 : 20”3 : 30”4 : 40”
E : EPDMN : Buna-NS : SiliconeV : Viton2)
T : TEV1)
C :DI cleaningV :VacuumPackageS :SUS ringInsertion
V:HighVolume
20 : 2.0µm45 : 4.5µm11 : 10.0µm1H : 100.0µm
D : 2-226 O-ring /Flat End
M : 2-222 O-ring /Flat End
1 : 10” C :DI cleaningV :VacuumPackage
U :Ultra HighVolume
20 : 2.0µm45 : 4.5µm11 : 10.0µm22 : 20.0µm33 : 30.0µm55 : 50.0µm1H : 100.0µm
K : 334 O-ring 1 : 10” E : EPDMT : TEV1)
J :Jumbo
H :Pleated
06 : 0.6µm12 : 1.2µm45 : 4.5µm11 : 10.0µm22 : 20.0µm33 : 30.0µm
H : Horizontal-non-core type
V : Vertical-non-core type
2 : 20”3 : 30”4 : 40”6 : 60”
E : EPDMN : Buna-NS : SiliconeV : Viton2)
UHV
※ Test conditions : Water 20.0°c / 1cP fluid
1) TEV : Teflon2) Encapsulated Viton2)
2) Teflon and Viton are trademarks of DuPont
Pleated Cartridge Filter
9
*PI
Description
- PI cartridge series are produced by World-wide unique technology from the filter media to all the component parts
- High effective area, combined with continuously profiled pore structure minimizes differential pressure
H
HV
10
Flomax(PP)
Ordering information
Grade Type MediaSupportMaterial
MicronRating
End-capOption
LengthO-ring
MaterialSpecialoption
E :ElectronicP :PharmaceuticalF :Food &BeverageBlank :Others
H :Pleated
PI :High PerformanceImproved
P :Polypropylene
05 : 0.5µm12 : 1.2µm20 : 2.0µm45 : 4.5µm60 : 6.0µm
A : 250mm DOEB : 254mm DOEC : 2-222 O-ring /Flat EndD : 2-226 O-ring /Flat EndE : 2-222 O-ring /Fin EndF : 2-226 O-ring /Fin EndM : 2-222 O-ring /Flat End
1 : 10”2 : 20”3 : 30”4 : 40”
E : EPDMN : Buna-NS : SiliconeV : Viton2)
T : TEV1)
C :DI cleaningV :VacuumPackageS :SUS ringInsertion
V :HighVolume
12 : 1.2µm20 : 2.0µm45 : 4.5µm
D : 2-226 O-ring /Flat End
M : 2-222 O-ring /Flat End
1 : 10” C :DI cleaningV :VacuumPackage
U :Ultra HighVolume
05 : 0.5µm45 : 4.5µm
K : 334 O-ring 1 : 10” E : EPDMT : TEV1)
J :Jumbo
H :Pleated
12 : 1.2µm20 : 2.0µm45 : 4.5µm60 : 6.0µm
H : Horizontal-non-core type
V : Vertical-non-core type
2 : 20”3 : 30”4 : 40”6 : 60”
E : EPDMN : Buna-NS : SiliconeV : Viton2)
UHV
※ Test conditions : Water 20.0°c / 1cP fluid
1) TEV : Teflon2) Encapsulated Viton2)
2) Teflon and Viton are trademarks of DuPont