Fit Out Concept
-
Upload
adnan-jadoon -
Category
Documents
-
view
13 -
download
0
description
Transcript of Fit Out Concept
-
FOOD
Dedicated to a better Brisbane
PREMISESDes ign , Cons t ruc t ion and F i t Out Gu ide
-
CONTENTSAbout this guide 2
Food laws 3
How to use this guide 4
Plans and design approval 5
Other issues to consider 6
Design and layout 7
Water supply 9
Sewage and waste water disposal 9
Storage of rubbish and recycling materials 10
Lighting 11
Ventilation 11
Hand washing facilities 15
Floors, walls and ceilings 17
Floors 17
Walls and ceilings 20
Fixtures, fittings and equipment 22
Equipment for cleaning and sanitising 22
Equipment for food preparation and storage 24
Fixtures and fittings 27
Storage 28
Toilet facilities 29
Food transport 29
Mobile food vehicles 30
B&Bs and homestays 31
Operating your business 32
Fees 32
Additional information 32
Key definitions 33
Australian Standards 34
Regional business centres 35
Customer service centres 35
Appendix 1: Example of a floor plan 36
Appendix 2: Example of a sectional elevation 37
1
-
2ABOUT THIS GUIDEThis guide is for businesses that design, construct and fit out food premises and mobile
food vehicles.
It provides information for:
food business operators
architects
designers
builders
equipment manufacturers
charities and not-for-profit organisations.
HOW IT CAN HELP YOUThis guide will help you by providing solutions for designing or constructing a food
premises.
Council has written this guide based on:
1. The Food Safety Standard 3.2.3 Food Premises and Equipment
2. Relevant Australian Standards (refer to page 34 for a list of standards).
WHO NEEDS TO READ THIS GUIDEYou need to read this guide if you have an existing, new, mobile, or domestic food
premises and vehicles used for commercial purposes.
This guide will be useful if you are designing a caf, restaurant, takeaway outlet or
mobile food van. It also provides advice if you are a caterer operating a food business
from home, or operating a charity or not-for-profit organisation to sell food.
Handy hint: Charities and not for profit organisations need to complywith the requirements of this guide and hold a licence to sell food.
Following the information in this guide when you begin the design process will help
ensure the food premises:
is easy to clean
has enough space and the correct facilities and equipment to produce safe food
has potable water, effective sewage disposal and enough light and ventilation for
food handling
provides facilities for staff to maintain high standards of personal hygiene
provides facilities to keep equipment clean and protect food from contamination
is designed to deter pests.
-
FOOD LAWSThe set up and operation of a food premises should comply with Food Safety Australia
New Zealand (FSANZ) Food Safety Standards and relevant Australian Standards.
Knowledge and understanding of the standards is necessary to design and build a
food premises. These standards are as follows:
Food Safety Practices and General Requirements
Food Premises and Equipment.
This guide is based on these standards.
WHERE CAN I GET COPIES OF THE STANDARDS?Copies of these standards are available from FSANZ. Contact FSANZ by phoning
1300 652 166 to purchase a copy or visit www.foodstandards.gov.au.
All Queensland legislation mentioned in this guide can be downloaded from
www.legislation.qld.gov.au or purchased from Goprint on 1800 679 778 or by visiting
their website at www.goprint.qld.gov.au.
Australian Standards referred to in this guide can be purchased from Standards
Australia on 1300 654 646 or by visiting their website at www.standards.com.au. A list
of relevant Australian standards can be found on page 34.
The Building Code of Australia, Volume One and Two, 1996 edition contains
building requirements for all Class 2 to 9 buildings and access requirements for people
with disabilities. The Building Code is federal legislation. Information on the Building
Code can be found by visiting their website at www.bcaonline.abcd.gov.au.
3
-
4HOW TO USE THIS GUIDEThis guide is based on three solutions for compliance.
Food safety outcomes
These outcomes must be met.
Acceptable solutions
These solutions show you how to meet the food safety outcomes.
Additional performance solutions
These solutions are optional and exceed the minimum requirements.
1 FOOD SAFETY OUTCOMESFood safety outcomes meet the Australian Food Safety Standard 3.2.3. These are
identified in the solid blue shaded boxes. Compare your design against these food
safety outcomes to ensure they meet the requirements.
2 ACCEPTABLE SOLUTIONSThese acceptable solutions are determined from a range of standards, knowledge and
experience including:
Australian Standards (listed on page 34 of this guide)
Brisbane City Council guidelines
experience in assessment of the design, construction and fit out of food premises.
Acceptable solutions are guidelines Council identifies as the minimum required to
meet the food safety outcomes. Your premises may need to use some or all of the
acceptable solutions depending on your type of food business.
You can use an alternative solution that is not recommended in this guide, but you
must be able to demonstrate that it meets the Food Safety Outcomes. If you choose
to use a solution not recommended by Council, your design approval may take more
time to approve to allow for investigation or alternative proposals. If you need advice
on solution options, please contact a Development Officer - Environmental Health on
3403 8888.
It is the applicants responsibility to demonstrate to Councils satisfaction that the
alternative design proposal meets the Food Safety Outcomes. Failure to demonstrate
this could result in a design being rejected.
Note: Where direct reference is made to other legislation or Australian Standards,
these solutions are not optional.
A round bullet point will identify acceptable solutions
3 ADDITIONAL PERFORMANCE SOLUTIONS If you want to operate at industry best practice level, then consider additional design
solutions. These design solutions will benefit your business through reducing costs of
maintenance, cleaning time and by giving you the confidence that you are operating
at a high standard. A few of these optional solutions are listed in this guide and can
be identified by a diamond shape. For more information on solutions that exceed the
minimum requirements contact Council or an industry association.
A diamond bullet point will identify additional design solutions.
-
PLANS AND DESIGN APPROVALPlans are the first step that need to be completed when you want to design, build orfit-out a new or existing food premise. The plans allow Council to assess the proposedfood premises before building starts. This saves architects, developers, and foodbusinesses time and money. Assessment of the plans is called design approval.
Before building or renovation starts, two copies of all plans drawn to scale must belodged at a Council Regional Business Centre and approved. Locations of the businesscentres are included in the back of this guide on page 35. When you lodge your plansthe appropriate fee must be paid. Your application for design approval will then beprocessed.
TYPES OF PLANS REQUIRED You must submit two copies of the following types of plans for your premises. Yourarchitect, draftsperson, or shopfitter should be able to assist you with providing these.
Site plan - not needed for mobile premises (Scale 1:100)Including car parking, the refuse area, adjacent land uses, sanitary facilities.
Floor plan (Scale of 1:50).
Sectional elevations (Scale of 1:50).
Hydraulic plans (Scale of 1:50).
Mechanical exhaust ventilation plans (Scale of 1:50).
Examples of a floor plan and sectional elevation can be found on pages 36 and 37.
DETAIL REQUIRED ON PLANSYou need to ensure the following details are included on the plans for your premises.
Finishes to floors, walls and ceilings.
Layout of all equipment, benches, fittings and fixtures, mechanical ventilation.
Door and window openings.
Where seating is provided for diners, the number of square metres of floor spaceavailable for dining and the number of persons to be catered for in this area.
Customer and staff toilet details (if detached, provide the distance to the facilitiesand the number available for use).
Mechanical exhaust ventilation (refer to Figure 2 on page 14).
Process flow for product receiving through to end-product delivery (refer to Figure 1on page 7).
GENERAL INFORMATION REQUIREDYou will need to provide the following information when you submit your plans.
Name, address and contact details of architect, draftsperson, or shopfitter.
Drawing scale and date plans drafted.
Name of food business occupier.
Real property description/address of the premises.
Proposed name of premises and intended nature of the food operation.
If you would like more information on requirements for plans, please contact Councilon 3403 8888 to speak to a Development Officer - Environmental Health.
5
-
6OTHER ISSUES TO CONSIDERWhen building your new food premises, it is essential that certain approvals be gained
before others. By obtaining all the required approvals before starting the design and
construction, you can reduce the possibility of expensive mistakes.
The following checklist can be used as a reference when making an application for a
new food premises. This will assist you with providing Council all the relevant and
correct information so your application can be quickly approved.
DESIGN APPROVAL CHECKLISTThe following approvals should be considered before starting construction of your
food business.
Development Assessment check that a food business can operate from thesite you are considering under the City Plan.
Building building approval is needed from a private certifier. Plumbing plumbing approval is needed from Councils Plumbing Services. Trade Waste obtain approvals for grease traps from a Trade Waste Officer. Advertising Signs. Footpath Dining Permit. Standing Vehicle Permit (required for mobile food vans).For further information on any of the above approvals or information, contact Council
on 3403 8888 or refer to Councils website at www.brisbane.qld.gov.au.