Kick‘n Crawl Barn™

InstructionsModel Number 71699

• For Ages 0 and Up • Please save these instructions for future reference.

• Activity toy requires two replaceable button-cell (LR44 or equivalent) alkaline batteries. Dispose of batteries safely.• Adult assembly is required for battery replacement.

• Tool required for battery replacement: Phillips screwdriver (not included).

Product features may vary from the photos above.

Play Quilt

Barn

Assembling the Play Quilt

Attaching the Activity Toys

Tubes

Support

Slots

StrapsPlay Quilt

Activity Toys

Activity Toys Activity Toy Straps

Long Activity Toy Strap

“T” Tab

Chicken Activity Toy

Roller Ball

• Place the play quilt print side up on a flat surface.• Fit the two straps on each side of the play quilt down

through the slots in the supports. Make sure the tab at theend of each strap forms a “T” under the support. Pull up onthe play quilt to be sure it is secure to the supports.

• Fit the two small fastener straps on each end of the tubesthrough the slots inside the circular opening in the sup-ports. Fasten the fastener straps together to secure thetubes to the supports.

• Locate the longest activity toy strap on the tubes.• Flatten the first tab on the longest activity toy strap.• Insert the strap through the slot in the top of the

chicken activity toy. Make sure the tab at the end of thestrap forms a “T” under the slot.

• Pull firmly on the chicken activity toy to be sure it is secure.Hint: To adjust the height of the chicken activity toy, flatteneach tab as you pull the strap through the slot. When thetoy is the desired height, make sure a tab forms a “T”behind the slot. Pull firmly on the toy after each adjustmentto be sure the toy is secure.• Spin the roller ball on the chicken activity toy to hear a

friendly tune and see flashing lights!• Fasten the remaining activity toys to the Velcro fasteners

on the activity toy straps.

Fastener Straps

To prevent entanglement injury,never place play quilt in a crib or playpen.

Never add strings, ties or otherproducts to this item.

WARNING

2

• Place the play quilt print side up on a flat surface.• Attach the activity toys to the straps on the sides of the

play quilt and place the toys on top of the quilt.• Locate the fastener strap at one end of the play quilt. Place

the supports and tubes at the opposite end of the play quiltand roll the play quilt from end to end.

• Fit the fastener strap through the loop on the outside of theplay quilt and fasten to close.

Fastener Strap

Fastener Straps

Tube Support

Slots

Plastic TabSleeve

Plastic Tab

FastenerStraps

Assembling the Barn Battery Replacement

Battery Tips

Carry-Along

ActivityToys

Battery Compartment Battery Compartment DoorActivity Toys

Activity Toy Straps

• Slide the tubes through the sleeves in each side of theplay quilt.

• Position the supports so that the sides with the slotsface inward.

• Fit the two small fastener straps on each end of thetubes through the slots inside the circular openings inthe supports. Fasten the fastener straps together tosecure the tubes to the supports.

• Fit the plastic tabs at the corners of the play quilt intothe slots in the supports.

• Fasten the activity toys to the activity toy straps.

• Locate the battery compartment door on the back of thechicken activity toy.

• Loosen the screw in the battery compartment door with aPhillips screwdriver. (The screw will remain in the door.)

• Lift the battery compartment door to open.• Remove the used batteries and dispose of them properly.• Insert two new button-cell (LR44 or equivalent) alkaline

batteries in the battery compartment as shown. Make surethe flat side of each battery (printed with the battery desig-nation) faces up.

Helpful Hint: We recommend using alkaline batteries forlonger battery life.• Replace the battery compartment door and tighten the

screw with a Phillips screwdriver. Do not over-tighten.• When lights or sounds from this toy become faint or stop

working, it’s time to replace the batteries!

2 x LR44 or Equivalent

Shown Actual Size

This product contains small parts.Batteries must be replaced by an adult.

CAUTION

• Do not mix old and new batteries.• Do not mix different types of batteries: alkaline, standard

(carbon-zinc) or rechargeable (nickel-cadmium).• Remove the batteries during long periods of non-use.

Always remove exhausted batteries from the toy. Batteryleakage and corrosion can damage this toy. Dispose ofbatteries safely.

• Never short circuit the battery terminals.• Non-rechargeable batteries are not to be recharged.• Only batteries of the same or equivalent type as recom-

mended in the "Battery Replacement" instructions are tobe used.3

• Machine-wash the play quilt in cold water on the gentlecycle. DO NOT use bleach. Tumble dry on low heat.

• Surface wash the tubes, activity toys and supports with amild cleaning solution.

• This toy has no consumer serviceable parts. Please do nottake this toy apart.

Care

FCC Note (United States Only)

Consumer Information

Fisher-Price, Inc., is a subsidiary of Mattel, Inc.,East Aurora, New York 14052, U.S.A.©2000 Mattel, Inc. All Rights Reserved. Printed in China® and ™ designate U.S. trademarks of Mattel, Inc. 71699pr-0920

Note: This equipment has been tested and found to complywith the limits for a Class B digital device, pursuant to Part15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in aresidential installation. This equipment generates, usesand can radiate radio frequency energy and, if not installedand used in accordance with the instructions, may causeharmful interference to radio communications. However,there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmfulinterference to radio or television reception, which can bedetermined by turning the equipment off and on, the user isencouraged to try to correct the interference by one or moreof the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Consult the dealer or an experienced radio/TV technician

for help.

If you have any questions about this product:

In CANADA, Mattel Canada Inc. 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2. Questions? 1-800-567-7724In GREAT BRITAIN, Mattel U.K., Ltd. Helpline: 01628 500303.

In AUSTRALIA, Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia.Consumer Advisory Service 1-800-800-812 (valid only in Australia).

Questions? We'd like to hear from you! Call Fisher-Price Consumer Relations, toll-free at1-800-432-KIDS, 8 AM - 6 PM EST Monday through Friday.Hearing-impaired consumers using TTY/TTD equipment, pleasecall 1-800-382-7470. Or, write to: Fisher-Price Consumer Relations,636 Girard Avenue, East Aurora, New York 14052.

• If removable rechargeable batteries are used, they areonly to be charged under adult supervision.

• Rechargeable batteries are to be removed from the toybefore they are charged.

• If you use a battery charger, it should be examinedregularly for damage to the cord, plug, enclosure andother parts. Do not use a damaged battery charger untilit has been properly repaired.

• When sounds from this toy become faint or stop working,it’s time for an adult to replace the batteries!

Battery Tips