Firewood processor VM420 - Riko UK · PDF fileDuun Firewood Processor 10 Splitting knives and...
Transcript of Firewood processor VM420 - Riko UK · PDF fileDuun Firewood Processor 10 Splitting knives and...
Duun Firewood Processor 8
The machine with the best properties
Servo-assisted cutting movement and hydraulic knife lift as
standard.
3 hydraulic pumps provides great capacity and chain speed of
28 second meters.
Capacity of up to 42 cm diameter and up to 11 tons splitting
force, automatic pressure adjustment.
Adjustable saw sword movement and cutting force for
adaptation to the material at hand.
Very fast cycle; 2.05 seconds for 40 cm tour retour.
Cooling system with transport of sawdust makes for low,
stable temperature of the hydraulic system and possibility for
further transport of sawdust.
Reliable 4m conveyor with hydraulic chain drive and sideways
adjustment, grid in the bottom secures extra cleaning of the
firewood.
Compact design in high-tensile steel provides extra durability.
Log rack with or without hydraulic operation provides a better
working environment and more efficient processing.
Firewood processor VM420
Kjølesystem
Sponutblåser
Duun Firewood Processor 9
Adjustment of conveyor emergency stopThe conveyor has adjustable speed.
The handle activates emergency stop and makes the
splitter go backwards.
Robust and easy to operateVery sturdy feeding table that withstands greater loads.
Manufactured from high-tensile steel complete with two
supporting legs on each side.
Flexible fastening for in-feeding rollers so that the location and
number may be adapted according to the requirements.
Thermometer and oil level control is placed directly on the
hydraulic tank in aluminium.
Cooling air is taken in though the grid.
The output conveyor’s speed is adjustable.
Hydraulic lifting and lowering of the splitting knife is standard.
Optimal operationAll functions in one grip. Cutting splitting and feed belt
forward and backward are operated by the big handle.
Hydraulic adjustment of the splitting knife by the handle
to the right. Very durable marking.
Adjustable cuttingBoth saw movement speed and pressure can be adjusted
adapting the process to log diameter. Countdown ruler.
With durable marking provides the opportunity for adapted
and even length even for the last stumps of the log.
40 – 60cmThe machine can be adjusted from 40cm to 60cm stroke
length for cutting and splitting firewood pieces longer than
40cm. The maximum piece length is 60cm.
Log clampSpring loaded log holder which guides the log
during feeding and secures a firm grip on the
last piece. Adjustable sword speed and sword
pressure for optimation of the cutting process.
Firewood processor VM420
Duun Firewood Processor 10
Splitting knives and robust fasteningThe splitting knives have a sturdy back support and
hydraulic adjustment of height as standard. In order to
simplify the replacement of the knives, the knives are
brought to the top position before they are released and
replaced. Extra knife bracket No 141209272 can be attached
to the chassis for placing extra splitting knife. In addition
to 6 part splitting knife which is standard 4 – 6 and 10
part splitting knives are delivered. The 10 part splitting
knife (in the middle) requires 11 tons splitting force and
“uncomplicated” material to be split. In addition to 6 part
splitting knives, which is standard, even 4-part and 8 part
knives are supplied as accessories.
Remote feed belt runThis handle at the end on the feed belt makes the
feed belt run. The operator can position himself here
and activated the feed function and “handshake”
difficult logs – that is making them enter the feed belt.
A detail simplifying handling of crooked material.
High cutting capacityThe sword is custom made by a leading manufacturer
according to our specifications. This ensures great
chain speed and that the sword is dimensioned
for considerable loads. The saw chain is a so-called
forestry machine chain of high quality designed for
great speeds and continual loads.
Service friendlyBoth covers in front can be opened by screw driver or
similar. The same for the big cover situated at the tractor
side. This simplifies the access for systematic cleaning
and maintenance.
Stepless setting of cutting lengthRobust log stoppers with possibility for stepless setting
and with visible and durable ruler to show the cutting
length.
The log stopper may also be angled upwards in order to
provide free space if required.
Big and visible tank (5 litres) for chain lubricant. The chain
lubrication is adjustable and is only active during cutting.
Firewood processor VM420
Duun Firewood Processor 11
The machine with the very best properties
Hydraulic log clamp manually or automatic operated is
standard.
Servo-assisted cutting movement and hydraulic knife lift as
standard.
All work commands in one handle.
Capacity of up to 42 cm diameter and up to 11 tons
splitting force, automatic pressure adjustment.
Remote feed belt control as accessory.
Cooling system with transport of sawdust makes for low,
stable temperature of the hydraulic system and possibility
for further transport of sawdust.
Can be connected to chip conveyor screw SK300 for
collection of saw chips.
Reliable 4m conveyor with hydraulic chain drive and
sideways adjustment, grid in the bottom secures extra
cleaning of the firewood.
Compact design in high-tensile steel provides extra
durability.
Log rack with or without hydraulic operation makes for a
better working environment and more efficient processing.
Firewood processor VM420X
Kjølesystem
Sponutblåser
Remote feed belt control is standard.
The log clamp is hydraulic either automatic or
manually activated.
Duun Firewood Processor 12
The electric motor has direct
coupling to hydraulic pumps .
This pumps power all the processor
operations.
This is energy efficient utilisation of
the electric power.
Firewood processor VM420Electric powered
These models are powered by an 11 kw electric motor in 230
or 400 v voltage.
The motors have built in termistor fuse disconnecting power
when overheated.
This protects the motor against damage when overloaded or
malfunction.
Width transport position 2,550 mm Accessories Remote control of input conveyor article no. 141209020Voltage electric models 230 or 400 voltsPower performance 11 kilowattFuses 230v 63 ampere time-lag fuse 400v 32 ampere time lag fuse
EquipmentRemote feed belt control No. 141209020Splitting knife 4 part No. 14120004Splitting knife 8 part No. 14120003Splitting knife 10 part No. 14120008 (demands 11 tons)Knife bracket No. 141209072Log rack ST2440 manual No. 141409001Log rack ST2440 hydraulic No. 141409002Hydraulic feeding unit No. 141419001Triangel implement quick connect No. 1252637HMV implement quick connect No. 1252638
Specifications VM420Cutting diameter max. 42 cmChain operation HydraulicChain type Harvester chainSize saw chain 0.404 L.-71 chain linksDiameter chain file 5.5mmRetreating back support yesCleaning grid in the output conveyor yesVolume tank for saw chain lubricant 5 litresRPM power take-off 540 rpmOil tank volume 78 litresFeeding of logs Hydraulic feeder conveyorSplitter knives 6 part standard 4, 8 and 10 part accessory Splitting force 8500 kg alternatively 11,000 kgWood lengths 20-60 cm steplessChain speed 28 second metersWeight 875 kgHeight to feeding table 880 mm (with supports)Conveyor length 4028 mmConveyor max. sideways movement 25˚ to each side (distance in mm)Automatic conveyorchain tensioning YesHeight transport position 2465 mm (with supports)
Duun Firewood Processor 13
Chip conveyor screw SK300
Outlet tube Ø100 mm diameter. Total length 3000 mm. Powered by hydraulic
motor. Loading height mx. 2200mm. Runs parallel with the conveyor belt
drive. Can be “after” fitted to previous version of VM420 model.
Substantial air flow quantity ensures chip transfer during any condition.
The feed screw ensures a very dependable chip transport compared to fan
systems. This system also tolerates moist material. The screw is powered
by hydraulic motor fed by the machines hydraulic system. All necessary
coupling and hoses are standard.
The SK300 screw is fed
by the cooling fan.
Outlet tube Ø100mm having
maximum height of 2200mm
brings the chips to the
storing unit like bags, trailer,
boxes etc.
Substantial air flow.
Duun Firewood Processor 14
Sturdy log rack
with many practical details
Designed in high-tensile steel for maximum load bearing capacity and durability.
May be equipped with 3 driving rollers for safe feeding.
Brackets for forklift pockets for simple transportation.
Robust and safe chain operation.
Adjustable supports.
High edge in front keeps big and difficult logs in place.
Log rack for VM370 and VM420
Three power operated feeding rollers secure entering of
even crooked and difficult logs.
The supporting beam is equipped with stops that
secure the logs.
Duun Firewood Processor 15
Forklift pockets for transportationA practical detail that simplifies transportation and
storage.
Manual version No 1414 09001The log rack can also be delivered in “unpowered” ver-
sion as illustrated.
Front stopRaised front that contributes to keep crooked and big
logs in place over the feeding rollers.
SpecificationsWeight 230 kg
Greatest width 2460 mm
Standard height 1010/1130 (1310/1410)
Depth 2148mm
Loading depth 2012-2248 resp. watch depiction
Width manual roller 200 mm
Width power operated rollers 300 mm
Total power operated rollers 3
Product in manual operation No. 1414 09001
Product in hydraulic driven
Version No. 1414 09001
Hydraulic feed unit complete No. 141409004
Log rack for VM370 and VM420
� � �� � �� � �����
Adjustable supportsAdjusts stepwise to adapt
the table’s height to the
machine’s height and the
terrain.
� ��� �� �� � � �� � � �� � � � � �� � � � � � �