FIELD SERVICES LOUIS ALLIS HISTORY · electric motors since 1901. Since that time, Louis Allis has...
Transcript of FIELD SERVICES LOUIS ALLIS HISTORY · electric motors since 1901. Since that time, Louis Allis has...
®
The history of Louis Allis goes back more than 100
years where it all started in an old shoe factory
at 710 Hanover Street in Milwaukee. It was here
that Mr. Allis started producing DC electric motors
for the horseless carriage industry. Over time
Louis Allis made its name in the specialty motor
business. Throughout the last century, Louis Allis
has produced over two million specialty motors of
all sizes. The name Louis Allis represents quality and
reliability worldwide. Designing and manufacturing
motors to perform a specifi c duty within today’s
industry has always been Louis Allis’ strength. With
our current offering of specialty motors, stock
motors, repair, and fi eld service, Louis Allis is the
one-stop solution for all of your electric motor
needs. We take pride in carrying on the Louis Allis
name by serving you with our superior products and
services.
LOUIS ALLIS HISTORY
The Trusted Name with over 100 Years of Dependable Service.
Whether local or across the globe, Louis
Allis is the solution to all of your fi eld service
needs. With a dynamic range of fi eld service
capabilities, it is our goal to have you up and
running as quickly as possible in order to keep
your downtime to a minimum.
FIELD SERVICES
We provide a wide range of fi eld and
shipboard services including:
645 Lester Doss Road | Warrior, Alabama 35180205.590.2986
Fax: 205.590.1571www.louisallis.com
The Trusted Name with over 100 Years of Dependable Service.
www.louisallis.com
Removing reactor cooling pump from nuclear plant
• Motor/generator removal
• Motor/generator installation
• Troubleshooting
• Laser alignment
• Vibration analysis
• Field rewinding of large motors
• Field repair of hydro generators
• Field re-stacking of rotors and stators
• Field balancing for fans and turbine rotors up to 100,000 lbs.
• Field machining capabilities
• Bearing inspection
• Trim balance installed vertical and horizontal motors
• Brush/slip ring/commutator troubleshooting, analysis, and fi eld repair
Motor installation on docked ship
Field recondition of large mill motor
A WORLDWIDE ELECTRIC COMPANY
Louis Allis has been providing specialty
electric motors since 1901. Since that
time, Louis Allis has produced more
specialty motors than any other U.S.
motor manufacturer.
SPECIALTY MOTORS
Designing motors for specifi c industry applications continues
to be the primary focus of Louis Allis.
Building specialties is our specialty
• Retrofi t frames
• Multi-speed motors
• Vertical motors
• Design D high slip motors
• Stainless steel wash down
• Vibrator/Shaker motors
• Aluminum lightweight motors
• Pancake motors
• Eddy current clutches
• Oil well pump motors
• Crusher duty motors
• Hoist and crane duty
• Compressor duty
• Military motors
• Extractor duty
• Sealed insulation system
Every factory recertifi ed motor that Louis Allis sells is rebuilt by
expert craftsmen at the highest level of quality in the industry.
FACTORY RECERTIFIED MOTORS
Why pay new motor prices and endure long lead times when you can purchase a
Factory Recertifi ed motor from Louis Allis?
Louis Allis factory recertifi ed motors can be custom engineered and built to
your specifi cations at a much lower cost than the OEM.
Louis Allis can remanufacture a customer’s existing motor to restore it to
like-new condition. In addition, Louis Allis can redesign a customer’s
existing motor to address changes in application requirements.
Louis Allis sells replacement motor parts.
Louis Allis will offer to purchase your surplus motor inventory.
Stock Louis Allis Motor Types Include:
MOTOR REPAIR & ROTOR SERVICES
Louis Allis has a full rage of repair capabilities for all motor types. We are equipped
to repair motors up to 20,000 HP and 13,200 volts.
Whatever your need,
Louis Allis is your
one-stop solution.
Louis Allis can match any manufacturer’s footprint,
form, fi t, and function.
Expeller motor
We stock motors through 15,000 HP. Many of our motors are ready
for immediate shipment.
Typical motors we repair:• AC induction
• AC synchronous
• AC wound rotor
• DC
• Explosion proof
• MSHA approved
• Vertical
Our large motor services include:• Complete machine shop capability
• Electrical and mechanical redesign
• Rental and replacement motors in
stock through 15,000 HP
• Personnel available 24 hours
• Dynamic balancing up to 100,000 lbs.
• Babbitt bearing repair
• High HP load testing
• Manufacture replacement pole pieces
• Rewind fi eld coils and interpoles
• Manufacture slip ring assemblies
We offer a wide range of stator and rotor services in-house:• Aluminum and copper alloy rebar
• Rotor & stator restack
• Custom-designed rotors for
specifi c applications
• Engineering
• New laser cut laminations
• Bar kits
• Core loss testing
• Centrifuge duty
• Coal pulverizer duty
• Fan duty
• Compressor duty
• Mill duty
• Vibrator/Shaker duty
• Crane duty
• AC Induction
• Synchronous
• AC Wound Rotor
• DC
• Design D
• Vertical mount
• Fan duty (high inertia)
• Crane duty
• Compressor duty
• Coal pulverizer
• Chipper duty
• Banberry duty
• Ball mill duty
• Shaker duty
• Extractor duty
A WORLDWIDE ELECTRIC COMPANY
Louis Allis has been providing specialty
electric motors since 1901. Since that
time, Louis Allis has produced more
specialty motors than any other U.S.
motor manufacturer.
SPECIALTY MOTORS
Designing motors for specifi c industry applications continues
to be the primary focus of Louis Allis.
Building specialties is our specialty
• Retrofi t frames
• Multi-speed motors
• Vertical motors
• Design D high slip motors
• Stainless steel wash down
• Vibrator/Shaker motors
• Aluminum lightweight motors
• Pancake motors
• Eddy current clutches
• Oil well pump motors
• Crusher duty motors
• Hoist and crane duty
• Compressor duty
• Military motors
• Extractor duty
• Sealed insulation system
Every factory recertifi ed motor that Louis Allis sells is rebuilt by
expert craftsmen at the highest level of quality in the industry.
FACTORY RECERTIFIED MOTORS
Why pay new motor prices and endure long lead times when you can purchase a
Factory Recertifi ed motor from Louis Allis?
Louis Allis factory recertifi ed motors can be custom engineered and built to
your specifi cations at a much lower cost than the OEM.
Louis Allis can remanufacture a customer’s existing motor to restore it to
like-new condition. In addition, Louis Allis can redesign a customer’s
existing motor to address changes in application requirements.
Louis Allis sells replacement motor parts.
Louis Allis will offer to purchase your surplus motor inventory.
Stock Louis Allis Motor Types Include:
MOTOR REPAIR & ROTOR SERVICES
Louis Allis has a full rage of repair capabilities for all motor types. We are equipped
to repair motors up to 20,000 HP and 13,200 volts.
Whatever your need,
Louis Allis is your
one-stop solution.
Louis Allis can match any manufacturer’s footprint,
form, fi t, and function.
Expeller motor
We stock motors through 15,000 HP. Many of our motors are ready
for immediate shipment.
Typical motors we repair:• AC induction
• AC synchronous
• AC wound rotor
• DC
• Explosion proof
• MSHA approved
• Vertical
Our large motor services include:• Complete machine shop capability
• Electrical and mechanical redesign
• Rental and replacement motors in
stock through 15,000 HP
• Personnel available 24 hours
• Dynamic balancing up to 100,000 lbs.
• Babbitt bearing repair
• High HP load testing
• Manufacture replacement pole pieces
• Rewind fi eld coils and interpoles
• Manufacture slip ring assemblies
We offer a wide range of stator and rotor services in-house:• Aluminum and copper alloy rebar
• Rotor & stator restack
• Custom-designed rotors for
specifi c applications
• Engineering
• New laser cut laminations
• Bar kits
• Core loss testing
• Centrifuge duty
• Coal pulverizer duty
• Fan duty
• Compressor duty
• Mill duty
• Vibrator/Shaker duty
• Crane duty
• AC Induction
• Synchronous
• AC Wound Rotor
• DC
• Design D
• Vertical mount
• Fan duty (high inertia)
• Crane duty
• Compressor duty
• Coal pulverizer
• Chipper duty
• Banberry duty
• Ball mill duty
• Shaker duty
• Extractor duty
®
The history of Louis Allis goes back more than 100
years where it all started in an old shoe factory
at 710 Hanover Street in Milwaukee. It was here
that Mr. Allis started producing DC electric motors
for the horseless carriage industry. Over time
Louis Allis made its name in the specialty motor
business. Throughout the last century, Louis Allis
has produced over two million specialty motors of
all sizes. The name Louis Allis represents quality and
reliability worldwide. Designing and manufacturing
motors to perform a specifi c duty within today’s
industry has always been Louis Allis’ strength. With
our current offering of specialty motors, stock
motors, repair, and fi eld service, Louis Allis is the
one-stop solution for all of your electric motor
needs. We take pride in carrying on the Louis Allis
name by serving you with our superior products and
services.
LOUIS ALLIS HISTORY
The Trusted Name with over 100 Years of Dependable Service.
Whether local or across the globe, Louis
Allis is the solution to all of your fi eld service
needs. With a dynamic range of fi eld service
capabilities, it is our goal to have you up and
running as quickly as possible in order to keep
your downtime to a minimum.
FIELD SERVICES
We provide a wide range of fi eld and
shipboard services including:
Louis Allis, 645 Lester Doss Road, Warrior, Alabama 35180 Phone: 205.590.2986 / Fax: 205.590.1571 / www.louisallis.com The Trusted Name with over
100 Years of Dependable Service.www.louisallis.com
Removing reactor cooling pump from nuclear plant
• Motor/generator removal
• Motor/generator installation
• Troubleshooting
• Laser alignment
• Vibration analysis
• Field rewinding of large motors
• Field repair of hydro generators
• Field re-stacking of rotors and stators
• Field balancing for fans and turbine rotors up to 100,000 lbs.
• Field machining capabilities
• Bearing inspection
• Trim balance installed vertical and horizontal motors
• Brush/slip ring/commutator troubleshooting, analysis, and fi eld repair
Motor installation on docked ship
Field recondition of large mill motor
A WORLDWIDE ELECTRIC COMPANY
WorldWide Electric Corporation, 3540 Winton Place, Rochester, NY 14623Phone: 800-808-2131 / Fax: 800-711-1616 / www.worldwideelectric.net