FERRI offset mowers TLP
description
Transcript of FERRI offset mowers TLP
GROUP A
“PROFESSIONAL” OFFSET MOWERS
Floating(Lift float of theflail head withnitrogenaccumulator)
Wear blade2 screwed rows ofcounter-blades
Inner lining
Pto shaft with overrun clutch
Mechanicalbreakaway
cm 60 offset
Rear adjustableroller with
screwed edges
TLP160A Front version for tractors
with front mounting
HP Tractor70 80 90 100 110 120
Min. tractor weightKg
Min. tractor widthm
TLP160 2400 1,80TLP200 2600 2,00TLP250 2800 2,20
Working positions (m)
166 cm
120 cm
90°
70°
TLP 200 TLP 250TLP 1602,993,59B
2,63A mTLP 160 TLP 250
3,533,23m 4,13
TLP 200
BA 60
cm
Lift float
Hydraulic offset
Elastic Joint betweengearbox and rotor
Mechanical breakaway
FERRI srl - Via Govoni, 30 - 44034 Tamara (FE) Italy - Tel. +39 0532 866866 - Fax +39 0532 866851 - [email protected] - www.ferrisrl.itSpare parts: Tel: +39 0532 866993 - Fax: +39 0532 867061 - e-mail: [email protected] sales service: Tel: +39 0532 866991 - Fax: +39 0532 866851 - e-mail: [email protected]
Equipped with:
IT IS RECOMMENDED that the connection between tractor and shredder and its setting up should be made with the Dealer according the instructionsand warnings listed on our Use and Maintenance Manual. For further information please contact our after sales service.
* Reach measured from tractor centre line to head edge** Multiple belt
Technical dataModel Cutting
widthMin-Maxsidesliding*
Flail head angle Weight Pto Belts Blade tipspeed
m m degrees Kg Rpm n° m/sec
TLP160 1,61 2,63-3,23 70° 90° 1000 540 5 50TLP160A 1,61 2,63-3,23 70° 90° 1000 1000 5 50TLP200 1,97 2,99-3,59 70° 90° 1120 540 5 50TLP250 2,51 3,53-4,13 70° 90° 1340 1000 1** 45
MachinesModel Flails
TLP160
A 48 hedge trimming flails B 32 multiuse “Y” blades C 16 forged hammer-blades
TLP200
A 60 hedge trimming flails B 40 multiuse “Y” blades C 20 forged hammer-blades
TLP250
A 78 hedge trimming flails B 52 multiuse “Y” blades C 26 forged hammer-blades
Machines with side-shift linkage for tractors with front mountingModel Flails
TLP160A
A 48 hedge trimming flails B 32 multiuse “Y” blades C 16 Forged hammer-blades
Accessories
Kit distributor with floating (cod. ZL1605)
Flails
Specific rotor Interchangeable on the same rotor
Articulated hedge trimming blades for:grass, bushes
Ø max 1 cm
Multiuse “Y” blades for:grass, bushes, shrubs
Ø max 4 cm
Forged hammer-blades for:twigs, grass
Ø max 4 cm
Cod. 0901139 Cod. 0901176 Cod. 0901175
� Lift float of the flail head with nitrogen accumulator
� Hydraulic offset through a parallelogram system (cm 60 offset)
�Mechanical breakaway
� Elastic Joint between gearbox and rotor
� Reinforced frame
� Adjustable flow restrictor for flail head drop
� Rear adjustable roller with screwed edges
� Adjustable and wearproof side skids
� Double wear blades
� Adjustable cutting height
� Pto shaft with overrun clutch
Suitable for tractors equipped with 2 distributors provided with 2 double acting sections, one of which with floating. In case the tractor has only one acting, it will be necessary to fit the kit distributor with floating (see option.)A B C
Warning