FERRI Hydraulic reach mowers TM47
2
GROUP A HYDRAULIC REACH MOWERS Cable controls Monolever electric control HP Tractor 50 60 70 80 Min. tractor weight Kg Min. tractor width m TM47 Farm 2800 1,90 Working positions (m) TM47 Farm A m 4,63 B m 3,17 C m 1,10 D m 3,51 E m 3,09 F m 1,59 G m 0,86 H m 4,19 Floating head system “Overlap” spiral rotor with two spiral rows Drop forged brackets for the arms Drop forged lever for flail head rotation Oil cooler with thermostat (option) HP 35 available to the rotor HP 45 max to hydraulic motor PATENTED Drop forged parts used in the arms Second arm crancked backwards allowing very compact working position behind the tractor Drop forged parts used in flail head articulation Reversible rotor by cable Adjustable rear roller Cast iron gear motor (group 3) Mechanical breakaway Cast iron gear pump (group 3) Two independent hydraulic systems Cable controls Pressurizzed oil tank A 950 F C B D E G 96 H 340
description
Hydraulic reach mowers for grass, shrubs, bushes, sticks, wood (max. cutting width: Ø 4 cm).
Transcript of FERRI Hydraulic reach mowers TM47
GROUP A
HYDRAULIC REACH MOWERS
Cable controls Monolever electric control
HP Tractor 50 60 70 80 Min. tractor weightKg
Min. tractor widthm
TM47 Farm 2800 1,90
Working positions (m)
TM47 Farm
A m 4,63
B m 3,17
C m 1,10
D m 3,51
E m 3,09
F m 1,59
G m 0,86
H m 4,19
Floating head system
“Overlap” spiral rotorwith two spiral rows
Drop forged brackets for the arms
Drop forged lever for flail head rotation
Oil cooler with thermostat(option)
HP 35 available to the rotorHP 45 max to hydraulic motor
PATE
NTE
D
Drop forged parts used in the arms
Second arm crancked backwards allowing very compact working positionbehind the tractor
Drop forged parts used in flail head articulation
Reversible rotor by cable
Adjustable rear roller Cast iron gear
motor (group 3)
Mechanical breakaway
Cast iron gear pump (group 3) Two independent
hydraulic systems
Cable controls
Pressurizzed oil tank
A 950
FC
B
DE
G 96
H
340
FERRI srl - Via Govoni, 30 - 44034 Tamara (FE) Italy - Tel. +39 0532 866866 - Fax +39 0532 866851 - [email protected] - www.ferrisrl.itSpare parts: Tel: +39 0532 866993 - Fax: +39 0532 867061 - e-mail: [email protected] Sales Service: Tel: +39 0532 866991 - Fax: +39 0532 866851 - e-mail: [email protected]
Equipped with:
IT IS RECOMMENDED that the connection between tractor and shredder and its setting up should be made with the Dealer according the instructionsand warnings listed on our Use and Maintenance Manual. For further information please contact our after sales service.
Technical dataModel Max horizontal
reach*Weight Oil Rotor Pto Flail head
angle
m Kg l Rpm MAX Rpm
TM47 Farm 4,63 839 125 3.100 540 230°* Reach measured from tractor centre line to head edge.
Machines with cable controls “Classic”Code Model
TM47LHFD312JA TM47 Farm with TI120 flail head m 1,20 - Multi-use blades TM47LHFD312JH TM47 Farm with TI120 flail head m 1,20 - Spoon blades TM47LHFD312JT TM47 Farm with TI120 flail head m 1,20 - “T” Hammer blades
Machines with electric controls “Electra”Code Model
TM47LHED312JA TM47 Farm with TI120 flail head m 1,20 - Multi-use blades TM47LHED312JH TM47 Farm with TI120 flail head m 1,20 - Spoon blades TM47LHED312JT TM47 Farm with TI120 flail head m 1,20 - “T” Hammer blades
Flail head TI120
Width (m) 1,20Rotor speed (rpm) 3100Blade tip speed (m/sec) 60Flail head angle 235°Weight (Kg) 210
TI 120Direct drive
Completing equipment to the base machineCode Length
TST5017 (640-890) 1 set of standard stabilizers to the tractor
OPT001121000 “Delta yoke” for stabilizers
TGA4611 (640-890) 1 set of bent stabilizers recommended with “Delta yoke”
TGA5014 (340-460) Top link stabilizer
� Flail head
� Totally independent hydraulic system
� FLOATING head system
� Second arm cranked backwards allowing very compact working positions both on hedges and verges
� First arm double acting tap
� Drop forged parts used in the arms and flail head articulation
� Mechanical breakaway
� Reversible rotor
� Front and rear rubber resistant guard for flail head
� Oil and Pto shaft
Warning
OptionCode
TM56SX02 Oil cooler with thermostat TM5606 Lift float (LFA mechanic) TM4601 Bumpers with illumination system
Flails TI 120Interchangeable on the same rotor
Multi-use blades for: grass, shrubs, bushes, sticks, wood
Ø max 3 cm
Spoon blade for: grass,shrubs, bushes, sticks,wood
Ø max 2 cm
“T” Hammer forwoods
Ø max 4 cm
Cod. 0901146 Cod. 0901164 Cod. 0901147
n° 44 n° 22 n° 22
