Features Package Arrangement - Tuba-Turbine
Transcript of Features Package Arrangement - Tuba-Turbine
CENTAUR 40Gas Turbine Generator Set
Package Arrangement
Gas Turbine
• Centaur ® 40 Industrial, Single-Shaft
• Axial Compressor – 11 Stages
• Annular Combustion Chamber
– 10 Fuel Injectors
• Coatings
– Compressor: Inorganic Aluminum
– Turbine and Nozzle Blades:
Precious Metal Diffusion Aluminide
• Proximity Probe Vibration Transducers
Main Reduction Drive
• Epicyclic
– 1800 or 1500 rpm
– Acceleration Vibration Transducers
Generator
• Salient Pole, 3 Phase, 6 Wire,Wye Connected, Synchronous withBrushless Exciter
• Open Drip-Proof Construction
• Sleeve Bearings
• Velocity Vibration Transducers
• Solid-State Voltage Regulation withPermanent Magnet Generator
• NEMA Class F Insulation with F Rise
• Continuous Duty Rating
Package
• Steel Base Frame with Drip Pans
• Direct-Drive AC Start System
• Natural Gas Fuel System
Features
• Industrial Gas Turbine Package
• Compact, Integrated PackageProviding Ease of Installation
• Factory Tested
• Dry, Low Emission (SoLoNOx™)Combustion Available
• Control System
– Microprocessor-Based PLC
– Generator Control
– Vibration and Temperature Monitoring
– Auto Synchronizing
• Integrated Lube Oil System
– Turbine-Driven Lube Pump
– AC Pre/Post Lube Pump
– Backup Lube Pump
– Air/Oil Cooler
– Integral Lube Oil Tank
– Lube Oil Tank Heater
– Lube Oil Filter
• Documentation
– Drawings
– Quality Control Data Book
– Inspection and Test Plan
– Test Reports
– O&M Manuals
• Factory Testing of Turbine and Package
Optional Equipment/Services
• Generator Options:
– WPII, TEWAC
– Standby Duty Rating
– Standard Voltages:3300, 6600, 11,000 50 Hz;4160, 6900, 12,470, 13,800 60 Hz
• Fuel Systems
– Liquid
– Dual (Gas/Liquid)
– SoLoNOx, Dry, Low Emission
– Alternate Fuels (such as naphtha,propane, low Btu)
• Lube Oil System
– Water/Oil Lube Cooler
– Electrostatic Demister
– Duplex Lube Oil Filters
• Control System
– Remote Display/Control Terminal
– Heat Recovery Application Interface
– Serial Link Supervisory Interface
– KW Control
– KVAR/Power Factor Control
– Turbine Performance Map
– Historical Displays
– Printer/Logger
– Predictive Emissions Monitoring
– Field Programming Terminal
• Accessory Equipment
– 24-VDC Battery/Charger System
– Turbine Cleaning System: On-Crankand On-line
– Package Lifting Kit
• Weatherproof Acoustic Enclosure
• Ancillary Equipment: Various Air Inletand Exhaust Systems
– Inlet and Exhaust Silencers
– Self-Cleaning or Prefilter/BarrierAir Inlet Filter
– Inlet Evaporative Cooler
– Inlet Chiller Coils
– Ancillary Support Frame
• Onskid Microprocessor-Controlwith Auto Sync Capability
• Multiple Fuel Capability
Industrial/Utility Grade
Solar Turbines IncorporatedP.O. Box 85376San Diego, CA 92186-5376
Caterpillar is a trademark of Caterpillar Inc.Solar, Centaur and SoLoNOx are trademarks of Solar Turbines Incorporated.Specifications subject to change without notice. Printed in U.S.A.©1998 Solar Turbines Incorporated. All rights reserved.DS40IPG/1198/5M
FOR MORE INFORMATION
Telephone: (+1) 619-544-5352Telefax: (+1) 619-544-2633Telex: 695045Internet: www.solarturbines.com
CENTAUR 40Gas Turbine Generator Set
Available PerformanceNominal Performance*
Output Power, kWeISO: 15°C (59°F), sea level 3515
Heat Rate, kJ/kWe-hr 12 912(Btu/kWe-hr) (12,240)
Exhaust Flow, kg/hr 67 004
(lb/hr) (147,718)
Exhaust Temperature, °C 437(°F) (819)
* No inlet or exhaust lossesRelative humidity 60%Natural gas fuel withLHV = 31.5 to 43.3 MJ/nm3
(800 to 1100 Btu/scf)
Forward End
• Turbine Control Box
Left Side
• Lube Oil: Drain, Vent, Cooler
• Generator Control Box, Power
• Generator Drip Pan Drain
• AC Power
– Lube Tank Heater
– Pre/Post Lube Pump
– Backup Lube Pump
Right Side
• AC Power - Start Motor
• Generator Monitor Box
Aft End
• Fuel Inlet
• Turbine Cleaning
• Fuel Filter, Combustor andExhaust Collector Drains
• Auxiliary Air (optional) for:
– Liquid Fuel Atomizing
– Self-Cleaning Filter
• AC Power
– Liquid Fuel Pump (optional)
• Package Ground
Typical Service Connections
Length: 9754 mm (32’ 0”)
Width: 2438 mm (8’ 0”)
Height: 2591 mm (8’ 6”)
Approx.
Weight: 26 015 kg (57,350 lb)
DS40IPG-003M
Aft EndLeft SideForward End
250 (482)
OU
TP
UT
PO
WE
R A
T G
EN
ER
AT
OR
TE
RM
INA
L, M
We
6.0
-30 (-22)
INLET AIR TEMPERATURE, °C (°F)
5.5
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
10 (50)
18 (61)
16 (55)
14 (48)
12 (41)
10 (34)
8 (27)
300 (572)350 (662)
400 (752)
450 (842)
500 (932)
76 (
168)
74 (
163)
72 (
159)
70 (
154)
68 (
150)
64 (
141)
62 (
137)
Fuel Flow, MW (MM Btu/hr)
Exhaust Temperature, °C (°F) Exh
au
st F
low
, T
ho
usa
nd
s kg
/hr
(lb
/hr)
50 (122)30 (86)
66 (
146)
Full Load Output
-10 (14)
DS40IPG-002M
CENTAUR 50Gas Turbine Generator Set
Package Arrangement
Gas Turbine
• Centaur ® 50 Industrial, Single-Shaft
• Axial Compressor – 11 Stages
• Annular Combustion Chamber
– 12 Fuel Injectors
• Coatings
– Compressor: Inorganic Aluminum
– Turbine and Nozzle Blades:
Precious Metal Diffusion Aluminide
• Proximity Probe Vibration Transducers
Main Reduction Drive
• Epicyclic
– 1800 or 1500 rpm
– Acceleration Vibration Transducers
Generator
• Salient Pole, 3 Phase, 6 Wire,Wye Connected, Synchronous withBrushless Exciter
• Open Drip-Proof Construction
• Sleeve Bearings
• Velocity Vibration Transducers
• Solid-State Voltage Regulation withPermanent Magnet Generator
• NEMA Class F Insulation with F Rise
• Continuous Duty Rating
Package
• Steel Base Frame with Drip Pans
• Direct-Drive AC Start System
• Natural Gas Fuel System
Features
• Industrial Gas Turbine Package
• Compact, Integrated PackageProviding Ease of Installation
• Factory Tested
• Dry, Low Emission (SoLoNOx™)Combustion Available
• Control System
– Microprocessor-Based PLC
– Generator Control
– Vibration and Temperature Monitoring
– Auto Synchronizing
• Integrated Lube Oil System
– Turbine-Driven Lube Pump
– AC Pre/Post Lube Pump
– Backup Lube Pump
– Air/Oil Cooler
– Integral Lube Oil Tank
– Lube Oil Tank Heater
– Lube Oil Filter
• Documentation
– Drawings
– Quality Control Data Book
– Inspection and Test Plan
– Test Reports
– O&M Manuals
• Factory Testing of Turbine and Package
Optional Equipment/Services
• Generator Options:
– WPII, TEWAC
– Standby Duty Rating
– Standard Voltages:3300, 6600, 11,000 50 Hz;4160, 6900, 12,470, 13,800 60 Hz
• Fuel Systems
– Liquid
– Dual (Gas/Liquid)
– SoLoNOx, Dry, Low Emission
– Alternate Fuels (such as naphtha,propane, low Btu)
• Lube Oil System
– Water/Oil Lube Cooler
– Electrostatic Demister
– Duplex Lube Oil Filters
• Control System
– Remote Display/Control Terminal
– Heat Recovery Application Interface
– Serial Link Supervisory Interface
– KW Control
– KVAR/Power Factor Control
– Turbine Performance Map
– Historical Displays
– Printer/Logger
– Predictive Emissions Monitoring
– Field Programming Terminal
• Accessory Equipment
– 24-VDC Battery/Charger System
– Turbine Cleaning System: On-Crankand On-line
– Package Lifting Kit
• Weatherproof Acoustic Enclosure
• Ancillary Equipment: Various Air Inletand Exhaust Systems
– Inlet and Exhaust Silencers
– Self-Cleaning or Prefilter/BarrierAir Inlet Filter
– Inlet Evaporative Cooler
– Inlet Chiller Coils
– Ancillary Support Frame
• Onskid Microprocessor-Controlwith Auto Sync Capability
• Multiple Fuel Capability
Industrial/Utility Grade
Solar Turbines IncorporatedP.O. Box 85376San Diego, CA 92186-5376
Caterpillar is a trademark of Caterpillar Inc.Solar, Centaur and SoLoNOx are trademarks of Solar Turbines Incorporated.Specifications subject to change without notice. Printed in U.S.A.©1998 Solar Turbines Incorporated. All rights reserved.DS50IPG/1198/5M
FOR MORE INFORMATION
Telephone: (+1) 619-544-5352Telefax: (+1) 619-544-2633Telex: 695045Internet: www.solarturbines.com
CENTAUR 50Gas Turbine Generator Set
Available PerformanceNominal Performance*
Output Power, kWeISO: 15°C (59°F), sea level 4600
Heat Rate, kJ/kWe-hr 12 269(Btu/kWe-hr) (11,628)
Exhaust Flow, kg/hr 68 680
(lb/hr) (151,410)
Exhaust Temperature, °C 509(°F) (949)
* No inlet or exhaust lossesRelative humidity 60%Natural gas fuel withLHV = 31.5 to 43.3 MJ/nm3
(800 to 1100 Btu/scf)
Forward End
• Turbine Control Box
Left Side
• Lube Oil: Drain, Vent, Cooler
• Generator Control Box, Power
• Generator Drip Pan Drain
• AC Power
– Lube Tank Heater
– Pre/Post Lube Pump
– Backup Lube Pump
Right Side
• AC Power - Start Motor
• Generator Monitor Box
Aft End
• Fuel Inlet
• Turbine Cleaning
• Fuel Filter, Combustor andExhaust Collector Drains
• Auxiliary Air (optional) for:
– Liquid Fuel Atomizing
– Self-Cleaning Filter
• AC Power
– Liquid Fuel Pump (optional)
• Package Ground
Typical Service Connections
Length: 9754 mm (32’ 0”)
Width: 2438 mm (8’ 0”)
Height: 2591 mm (8’ 6”)
Approx.
Weight: 27 430 kg (60,470 lb)
DS50IPG-003M
Aft EndLeft SideForward End
INLET AIR TEMPERATURE, °C (°F)DS50IPG-002M
-40 (-40) -20 (-4) 0 (32) 20 (68) 40 (104)
OU
TP
UT
PO
WE
R A
T G
EN
ER
AT
OR
TE
RM
INA
L,
MW
E
6.5
6.0
5.5
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
5.0
20 (68)
18 (61)
550 (1022)
Full Load Output450 (842)
400 (752)
350 (662)
250 (482)
200 (392)
16 (55)
14 (48)
12 (41)
300 (572)10 (34)
8 (27)
Fuel Flow, MW (MM Btu/hr)Exhaust Temperature, °C (°F)
500 (932)
78
(1
72
)
74
(1
63
)
70
(1
54
) 66
(1
46
)
62
(1
37
)
58 (
129)
Exh
aust
Flo
w, T
housa
nds
kg/h
r (lb/h
r)
General SpecificationsMars® 100 Gas Turbine
• Industrial, Two-Shaft
• Axial Compressor– 15-Stage– Variable Inlet Guide Vanes– Compression Ratio: 17.4:1– Inlet Airflow:
41.3 kg/sec (91.0 lb/sec)– Max. Speed: 11,168 rpm– Vertically Split Case
• Combustion Chamber– Annular-Type– Conventional or Lean-Premixed,
Dry, Low Emission (SoLoNOx ™)– 21 Fuel Injectors (Conventional)– 14 Fuel Injectors (SoLoNOx )– Torch Ignitor System
• Gas Producer Turbine– 2-Stage, Reaction– Max. Speed: 11,168 rpm
• Power Turbine– 2-Stage, Reaction– Max. Speed: 9500 rpm
• Bearings– Journal: Tilting-Pad– Thrust, Active: Tilting-Pad– Thrust, Inactive:
Fixed Tapered Land
• Coatings– Compressor Stators and Drum:
Inorganic Aluminum– Turbine and Nozzle Blades:
Precious Metal Diffusion Aluminide
• Vibration Transducer Type– Proximity Probes
Key Package Features
• Driver Skid with Drip Pans
• Driven Equipment Skid– Compressor– Compressor Auxiliary Systems
• 316L Stainless Steel Piping <4"
• Compression-Type Tube Fittings
• Gauge Panel Options– Fluid Gauges– Digital Display
• Electrical System Options– NEC, Class I, Group D, Div 1 or 2– CENELEC, Zone 1
• Turbotronic™ MicroprocessorControl System– Freestanding Control Console– Color Video Display– Vibration Monitoring
• Control Options– 24-VDC Control Battery/
Charger System– 120-VDC Accessory Battery/
Charger System– Gas Turbine and Package
Temperature Monitoring– Serial Link Supervisory Interface– Turbine Performance Map– Compressor Performance Map– Historical Displays– Printer/Logger– Predictive Emissions Monitoring– Process Controls– Compressor Anti-Surge Control– Field Programming
• Start Systems– Pneumatic– Direct Drive AC
• Fuel Systems– Natural Gas– Dual (Gas/Liquid)
• Integrated Lube Oil System– Turbine-Driven Accessories– AC Motor-Driven Accessories
• Oil System Options– Oil Cooler– Oil Heater– Tank Vent Separator– Flame Trap
• Axial Compressor Cleaning Systems– On-Crank– On-Crank/On-Line– Portable Cleaning Tank
• Gearbox (if applicable)– Speed Increaser– Speed Decreaser
• Air Inlet and ExhaustSystem Options
• Enclosure and Associated Options
• Factory Testing of Turbineand Package
• Documentation– Drawings– Quality Control Data Book– Inspection and Test Plan– Test Reports– Operation and Maintenance
Manuals
MARS 100Gas Turbine Compressor Set
Solar Turbines IncorporatedP.O. Box 85376San Diego, CA 92186-5376 U.S.A.
Available PowerPerformanceNo Inlet/Exhaust Losses,Relative Humidity 60%,Natural Gas Fuel withLHV = 31.5 to 43.3 MJ/nm3
(800 to 1100 Btu/scf)Optimum Power Turbine SpeedAC-Driven AccessoriesEngine Efficiency: 34.0%
Nominal Rating – ISOAt 15°C (59°F), Sea Level
Output Power11 185 kW (15,000 hp)
Heat Rate10 545 kJ/kW-hr (7490 Btu/hp-hr)
Exhaust Flow150 700 kg/hr (331,500 lb/hr)
Exhaust Temp486°C (906°F)
15°C (59°F) Turbine Rating Match.Other Turbine Rating Match PointsAre Available.
Package Dimensions
Caterpillar is a trademark of Caterpillar Inc.Solar, Mars, SoLoNOx , and Turbotronic are trademarks of Solar Turbines Incorporated.Specifications subject to change without notice. Printed in U.S.A.© 1999 Solar Turbines Incorporated. All rights reserved.DS100CS/699/2M
FOR MORE INFORMATIONTelephone: (+1) 619-544-5352Telefax: (+1) 619-544-2633Internet: www.solarturbines.com
MARS 100Gas Turbine Compressor Set
TURBINEAIR INLET
TURBINEEXHAUST
8611 mm(29' 6")
3563 m
m(1
1' 8
-1/4
")
DS100CS-003M
5512 mm (18' 1")
Typical Weight: 73 331 kg (161,616 lb) Width: 2794 mm (9' 2")
40 (136)
35 (119)
30 (102)
25 (85)
20 (68)
15 (51)
10 (34)
170
(375
)
160 (353)
150 (331)
140 (309)
130 (287)
120 (265)
110 (243)
100 (220)
90 (198)
80 (176)
70 (154)
525 (977)475 (887)
425 (797)
375 (707)
325 (617)
275 (527)
Full Load Output
Fuel Flow, MW (MM Btu/hr)
Exhaust Flow, Thousands kg/hr (lb/hr)7000
(9387)
9000(12,069)
5000(6705)
3000(4023)
1000(1341)
(14,751)
13 000(17,433)
OU
TP
UT
PO
WE
R P
AR
AM
ET
ER
, kW
(hp)
INLET AIR TEMPERATURE, ˚C (˚F) DS100CS-002M
-40 -30 -20 -10 0 10 20 30 40 50(-40) (-22) (-4) (14) (32) (50) (68) (86) (104)
15 000(20,115)
Exhaust T
emperature, ˚C
(˚F)
(122)
11 000
SATURN 20Gas Turbine Generator Set
Package Arrangement
Gas Turbine
• Saturn® 20 Industrial, Single-Shaft
• Axial Compressor – 8 Stages
• Annular Combustion Chamber
– 12 Fuel Injectors
• Coatings
– Compressor: Inorganic Aluminum
– Turbine and Nozzle Blades:
Precious Metal Diffusion Aluminide
• Velocity Vibration Transducers
Main Reduction Drive
• Epicyclic
– 1800 or 1500 rpm
– Acceleration Vibration Transducers
Generator
• Salient Pole, 3 Phase, 6 Wire,Wye Connected, Synchronous withBrushless Exciter
• Open Drip-Proof Construction
• Sleeve Bearings
• Velocity Vibration Transducers
• Solid-State Voltage Regulation withPermanent Magnet Generator
• NEMA Class H Insulation with H Rise
• Continuous Duty Rating
Features
• Industrial Gas Turbine Package
• Compact, Integrated PackageProviding Ease of Installation
• Factory Tested
• Multiple Fuel Capability
Package
• Steel Base Frame with Drip Pans
• Direct-Drive AC or PneumaticStart System
• Natural Gas Fuel System
• Control System
– Microprocessor-Based PLC
– Generator Control
– Vibration and Temperature Monitoring
– Auto Synchronizing
• Integrated Lube Oil System
– Turbine-Driven Lube Pump
– AC Pre/Post Lube Pump
– Air/Oil Cooler
– Integral Lube Oil Tank
– Lube Oil Filter
• Documentation
– Drawings
– Quality Control Data Book
– Inspection and Test Plan
– Test Reports
– O&M Manuals
• Factory Testing of Turbine and Package
• Weatherproof Acoustic Enclosure
Optional Equipment/Services
• Generator Options:
– Standby Duty Rating
– Standard Voltages: 380, 415, 3300 50 Hz;240, 480 2400, 4160 60 Hz
• Fuel Systems
– Liquid
– Dual (Gas/Liquid)
– Water Injection for NOx Control
– Alternate Fuels (such as naphtha,propane, low Btu)
• Lube Oil System
– Water/Oil Lube Cooler
– Electrostatic Demister
– Lube Oil Tank Heater
• Control System
– Remote Display/Control Terminal
– Heat Recovery Application Interface
– Serial Link Supervisory Interface
– KW Control
– KVAR/Power Factor Control
• Accessory Equipment
– Turbine Cleaning System: On-Crankand On-line
– Package Lifting Kit
• Ancillary Equipment: Various Air Inletand Exhaust Systems
– Inlet and Exhaust Silencers
– Self-Cleaning or Prefilter/BarrierAir Inlet Filter
– Inlet Evaporative Cooler
– Inlet Chiller Coils
– Ancillary Support Frame
• Onskid Microprocessor-Controlwith Auto Sync Capability
Industrial/Utility Grade
Solar Turbines IncorporatedP.O. Box 85376San Diego, CA 92186-5376
Caterpillar is a trademark of Caterpillar Inc.Solar and Saturn are trademarks of Solar Turbines Incorporated.Specifications subject to change without notice. Printed in U.S.A.©1998 Solar Turbines Incorporated. All rights reserved.DS20IPG/1198/5M
FOR MORE INFORMATION
Telephone: (+1) 619-544-5352Telefax: (+1) 619-544-2633Telex: 695045Internet: www.solarturbines.com
SATURN 20Gas Turbine Generator Set
Available PerformanceNominal Performance*
Output Power, kWeISO: 15°C (59°F), sea level 1210
Heat Rate, kJ/kWe-hr 14 741(Btu/kWe-hr) (13,972)
Exhaust Flow, kg/hr 23 220
(lb/hr) (51,240)
Exhaust Temperature, °C 516(°F) (960)
* No inlet or exhaust lossesRelative humidity 60%Natural gas fuel withLHV = 31.5 to 43.3 MJ/nm3
(800 to 1100 Btu/scf)
Typical Package Configuration
5.0 (17.1)
4.0 (13.6)
3.5 (12)
2.5 (8.5)300 (572)
350 (662)
400 (752)
450 (842)
500 (932)
550 (1022)
Exh
au
st F
low
, T
ho
usa
nd
s kg
/hr
(lb
/hr)
3.0 (10.2)
4.5 (15.4)
250 (482)
Full Load Output
Fuel Flow, MW (MMBtu/hr)
2.0 (6.8)
5.5 (18.8)
26 (
58)
25 (
56)
24 (
54)
23 (
52)
22
(5
0)
21
(4
8)
Exhaust Temperature, °C (°F)
500
OU
TP
UT
PO
WE
R A
T G
EN
ER
AT
OR
TE
RM
INA
L,
kWe
DS20IPG-002M
600
700
800
900
1000
1100
1200
1300
1400
1500
400
-30 (-22) -10 (14) 10 (50) 30 (86) 50 (122)
INLET AIR TEMPERATURE, °C (°F)
300
200
100
TURBINE AIRINLET CLEANER
LUBE OILCOOLER
PACKAGEGAUGE PANEL
ENCLOSUREVENT FAN
VENTSILENCER
ENCLOSUREVENT AIRINLET
PACKAGECONTROLCONSOLE
LUBE OILTANK HEATER
ENCLOSUREVENT AIREXHAUST
TURBINEEXHAUST
5982 mm(19' 7-1/2")813 mm(2' 8")
TURBINEAIR INLET
ENCLOSUREVENT AIREXHAUST
TURBINEAIR INLET
DS20IPG-003MWeight: 8980 kg (19,800 lb)
2134 m
m (
7' 0
")
1727 mm (5' 8")
(Inside)
(Inside)
TAURUS 60Gas Turbine Generator Set
Package Arrangement
Gas Turbine
• Taurus™ 60 Industrial, Single-Shaft
• Axial Compressor – 12 Stages
• Annular Combustion Chamber
– 12 Fuel Injectors
• Coatings
– Compressor: Inorganic Aluminum
– Turbine and Nozzle Blades:
Precious Metal Diffusion Aluminide
• Proximity Probe Vibration Transducers
Main Reduction Drive
• Epicyclic
– 1800 or 1500 rpm
– Acceleration Vibration Transducers
Generator
• Salient Pole, 3 Phase, 6 Wire,Wye Connected, Synchronous withBrushless Exciter
• Open Drip-Proof Construction
• Sleeve Bearings
• Velocity Vibration Transducers
• Solid-State Voltage Regulation withPermanent Magnet Generator
• NEMA Class F Insulation with F Rise
• Continuous Duty Rating
Package
• Steel Base Frame with Drip Pans
• Direct-Drive AC Start System
• Natural Gas Fuel System
Features
• Industrial Gas Turbine Package
• Compact, Integrated PackageProviding Ease of Installation
• Factory Tested
• Dry, Low Emission (SoLoNOx™)Combustion Available
• Control System
– Microprocessor-Based PLC
– Generator Control
– Vibration and Temperature Monitoring
– Auto Synchronizing
• Integrated Lube Oil System
– Turbine-Driven Lube Pump
– AC Pre/Post Lube Pump
– Backup Lube Pump
– Air/Oil Cooler
– Integral Lube Oil Tank
– Lube Oil Tank Heater
– Lube Oil Filter
• Documentation
– Drawings
– Quality Control Data Book
– Inspection and Test Plan
– Test Reports
– O&M Manuals
• Factory Testing of Turbine and Package
Optional Equipment/Services
• Generator Options:
– WPII, TEWAC
– Standby Duty Rating
– Standard Voltages:3300, 6600, 11,000 50 Hz;4160, 6900, 12,470, 13,800 60 Hz
• Fuel Systems
– Liquid
– Dual (Gas/Liquid)
– SoLoNOx, Dry, Low Emission
– Alternate Fuels (such as naphtha,propane, low Btu)
• Lube Oil System
– Water/Oil Lube Cooler
– Electrostatic Demister
– Duplex Lube Oil Filters
• Control System
– Remote Display/Control Terminal
– Heat Recovery Application Interface
– Serial Link Supervisory Interface
– KW Control
– KVAR/Power Factor Control
– Turbine Performance Map
– Historical Displays
– Printer/Logger
– Predictive Emissions Monitoring
– Field Programming Terminal
• Accessory Equipment
– 24-VDC Battery/Charger System
– Turbine Cleaning System: On-Crankand On-line
– Package Lifting Kit
• Weatherproof Acoustic Enclosure
• Ancillary Equipment: Various Air Inletand Exhaust Systems
– Inlet and Exhaust Silencers
– Self-Cleaning or Prefilter/BarrierAir Inlet Filter
– Inlet Evaporative Cooler
– Inlet Chiller Coils
– Ancillary Support Frame
• Onskid Microprocessor-Controlwith Auto Sync Capability
• Multiple Fuel Capability
Industrial/Utility Grade
Solar Turbines IncorporatedP.O. Box 85376San Diego, CA 92186-5376
Caterpillar is a trademark of Caterpillar Inc.Solar, Taurus and SoLoNOx are trademarks of Solar Turbines Incorporated.Specifications subject to change without notice. Printed in U.S.A.©1998 Solar Turbines Incorporated. All rights reserved.DS60IPG(5200)/1198/5M
FOR MORE INFORMATION
Telephone: (+1) 619-544-5352Telefax: (+1) 619-544-2633Telex: 695045Internet: www.solarturbines.com
TAURUS 60Gas Turbine Generator Set
Available PerformanceNominal Performance*
Output Power, kWeISO: 15°C (59°F), sea level 5200
Heat Rate, kJ/kWe-hr 11 882(Btu/kWe-hr) (11,263)
Exhaust Flow, kg/hr 79 284
(lb/hr) (174,798)
Exhaust Temperature, °C 486(°F) (906)
* No inlet or exhaust lossesRelative humidity 60%Natural gas fuel withLHV = 31.5 to 43.3 MJ/nm3
(800 to 1100 Btu/scf)
Forward End
• Turbine Control Box
Left Side
• Lube Oil: Drain, Vent, Cooler
• Generator Control Box, Power
• Generator Drip Pan Drain
• AC Power
– Lube Tank Heater
– Pre/Post Lube Pump
– Backup Lube Pump
Right Side
• AC Power - Start Motor
• Generator Monitor Box
Aft End
• Fuel Inlet
• Turbine Cleaning
• Fuel Filter, Combustor andExhaust Collector Drains
• Auxiliary Air (optional) for:
– Liquid Fuel Atomizing
– Self-Cleaning Filter
• AC Power
– Liquid Fuel Pump (optional)
• Package Ground
Typical Service Connections
OU
TP
UT
PO
WE
R A
T G
EN
ER
AT
OR
TE
RM
INA
L, M
We
7
6
5
4
3
2
1
-40 (-40) -20 (-4) 0 (32) 20 (68) 40 (104)
INLET AIR TEMPERATURE, °C (°F)
21 (72)
19 (65)
17 (58)
15 (51)
13 (44)
11 (38)
9 (31)
7 (24)
200 (392)
250 (482)
300 (572)
350 (662)
400 (752)
450 (842)
500 (932)
550 (1022)
89 (
196)
86 (
190)
83 (
183)
80 (
176)
77 (
170)
74 (
163)
71 (
157)
68 (
150)
Fuel Flow, MW (MM Btu/hr)
Full Load Output
Exh
aust
Flo
w,T
housa
nds
kg/h
r (lb/h
r)
Exhaust Temperature, °C (°F)
DS60IPG-002M
Length: 9754 mm (32’ 0”)
Width: 2438 mm (8’ 0”)
Height: 2591 mm (8’ 6”)
Approx.
Weight: 29 300 kg (64,590 lb)
DS60IPG-003M
Aft EndLeft SideForward End
Mobile Power - When and Where You Need It
Easy to Install and Relocate• Highway Transportable
• Modular Design for Quick Set-Upand Connection
• No Concrete Foundation Required
• Compact Footprint to Minimize SpaceRequirements
• Ideal for Rental Fleets and Utility
Equipment Pools
Environmentally Friendly• Low Emissions State-of-the-Art SoLoNOx™
Dry Low NOx Combustion System
• No Visible Emissions
• Sound Attenuation Package for Quiet Operation
• Low Profile Design to Minimize Installed Height
• Easy to Permit
The Taurus™ 60 Mobile Power Unit is the prime choice if you’re looking to produce reliable, low-cost, onsitepeaking power. Designed as an onsite generator system to optimize service for seasonal or cyclical loads, theTaurus 60 Mobile Generator System includes these key features:
Flexible Solution
• Leasing and Rental Options Available
• 5-MW Size for Highly Flexible Capacity Additionand Operation
• Fuel Flexibility, Gas or Diesel with Dual Fuel Option
Complete Systems Solution• Set-Up and Commissioning
• Site Preparation (if needed)
• Ancillary Support Systems (if needed)
• Wide Range of Product Support Programs
Operational Features• Dispatchable to be On Line in Six Minutes
(from cold start)
• Range of Control System Options for RemoteOperation and SCADA Integration
• Utility Grade Switchgear and ProtectiveRelay Module
• KVAR Control for Excellent ReactivePower Capability
TAURUS 60Mobile Power Unit
Solar Turbines IncorporatedP.O. Box 85376 MZ SP3-QSan Diego, CA 92186-5376 U.S.A.
Caterpillar is a trademark of Caterpillar Inc.Solar, Taurus and SoLoNOx are trademarks of Solar Turbines Incorporated.Specifications subject to change without notice. Printed in U.S.A.©2002 Solar Turbines Incorporated. All rights reserved.DS60MPU/702/4M
FOR MORE INFORMATIONTelephone: (+1) 619-544-5352Telefax: (+1) 858-694-6715
E-mail: [email protected]: www.solarturbines.com
TAURUS 60Mobile Power Unit
Nominal Generator SetPerformance
Typical Dimensions
Output Power, kWeISO: 15°C (59°F), sea level 5,500
Heat Rate, Btu/kWe-hr 11,263
At the core of the Mobile Power Unit is the 5.5 MW
Taurus 60 industrial gas turbine, with a population of
more than 1085 units in the field. The Mobile Power Unit
combines the features and benefits of the proven
Taurus 60 industrial gas turbine with a mobile system
that is easy to relocate and connect.
For information on price, delivery and how the
Taurus 60 Mobile Power Unit can meet your needs
for short-term capacity and reduce your exposure
to market spikes, e-mail: [email protected]
or call (858) 694-6570.
Sited Configuration of Taurus 60 Mobile Power Unit
Mobile Power -When and Where You Need It
EXHAUST STACK AND SILENCER
ATOMIZINGAIR COMPRESSOR
GAS FUELFILTER
TURBINE INLET AIR FILTER
TAURUS 60 GEN SET
PREFABRICATED POWERCONTROL ROOM
ACCESS PLATFORM
OIL MIST ELIMINATOR
8' 6
"
5' 1
/4"
5' 3
"
4' 0
"
PREFABRICATED POWERCONTROL ROOM
GROUND
RESISTOR
25
' 0"
3' 6
"
13
' 10
"
27' 0" 12' 1"6' 10"
UP
UP
GROUND
RESISTOR
AUXILIARY
TRANSFORMER
AUXILIARY
TRANSFORMER
LUBE OIL
COOLER
LUBE OIL
COOLER
INSTALLATION PLAN VIEW
POWER CONTROL MODULE
TRAILER
TRAILER
GENERATOR MODULE
LIQUID FUELFILTER SKID
GAS FUELMETER
TURBINE INLETAIR FILTER
OIL MISTELIMINATOR
14
' 7/8
"
23
' 7"
8' 6
"
EXHAUST STACK
EXHAUST SILENCER
LIQUID FUELFILTER SKID
ATOMIZINGAIR COMPRESSOR
10
' 0"
8' 7
"5
' 4-1
/2"
INLET AIR TEMPERATURE, ˚C (˚F)
45(113)
30(86)
15(59)
0(32)
-15(5)
OU
TP
UT
PO
WE
R, K
We
6500
6000
5500
5000
4500
4000
3500
OUTPUT POWER
TAURUS 70Gas Turbine Generator Set
Gas Turbine
• Taurus™ 70 Industrial, Single-Shaft
• Axial Compressor
– 14-Stage
– Variable Inlet Guide Vanesand Stators
– Compression Ratio 16:1
– Inlet Airflow: 26.2 kg/sec(57.7 lb/sec)
– Speed: 15,200 rpm
– Vertically Split Case
• Annular Combustion Chamber
– Conventional or Lean-Premixed,
Dry, Low Emission (SoLoNOx)
– 12 Fuel Injectors
– Torch Ignitor System
• Proximity Probe VibrationTransducers
• Turbine
– 3-Stage, Axial Flow
– Speed: 15,200 rpm
Main Reduction Drive
• Epicyclic
– 1500 or 1800 rpm (50 or 60 Hz)
– Acceleration Vibration Transducer
Generator
• Continuous Duty Rating
• Salient Pole, 3 Phase, 6 Wire,Wye Connected, Synchronous withBrushless Exciter
• Permanent Magnet Generator
• Open Drip-Proof Construction
• Sleeve Bearings
• Velocity Vibration Transducers
• NEMA Class F Insulation with F Rise
Package
• Steel Base Frame with Drip Pans• Direct-Drive AC Start System• Natural Gas Fuel System• Turbotronic™ 4 Control System
– ControlLogix Processor– Standard Display with Discrete
Event Log, Strip Chart, HistoricalTrend, Maintenance Screen
– Gas Turbine and Generator Control– Vibration and Temperature
Monitoring– Auto Synchronizing– KW Control– CGCM Module– KVAR/Power Factor Control
(Optional)– Combination Generator Control
Module with Load Share,Synchronization, Voltage Control,Reactive Power Control, GeneratorProtection
• Integrated Lube Oil System– Turbine-Driven Lube Pump– Pre/Post Lube Pump– Backup Lube Pump– Air/Oil Cooler– Integral Lube Oil Tank– Lube Oil Tank Heater– Simplex Lube Oil Filter– Oil Mist Eliminator
• Documentation– Drawings– Quality Control Data Book– Inspection and Test Plan– Test Reports– Operation and Maintenance
Manuals• Turbine Cleaning System:
On-Crank and On-Line• Factory Testing of Turbine and
Package
Optional Equipment
Industrial/Utility Grade
Standard Package Configurations
• Generator Options:
– Totally Enclosed Water/Air Cooled
– Standard Voltages:6600, 11,000 V (50 Hz);4160, 12,470, 13,800 V (60 Hz)
• Fuel Systems
– Liquid
– Dual (Gas/Liquid)
– Alternate Fuels (such as naphtha,propane, low Btu gas)
– ElectricFuel Control
• Lube Oil System
– Water/Oil Lube Oil Cooler
– Duplex Lube Oil Filters
– Vent Flame Trap
• Control System
– Auxillary and Remote Display/Control Terminal
– Heat Recovery ApplicationInterface
– Serial Link Supervisory Interface
– Turbine Performance Map
– Historical Displays
– Printer/Logger
– Field Programming Terminal
• Accessory Equipment
– 120-VDC Battery/Charger System
– Package Lifting Kit
• Weatherproof Acoustic Enclosure
• Ancillary Equipment:
– Inlet and Exhaust Silencers
– Self-Cleaning or Prefilter/BarrierAir Inlet Filter
– Inlet Evaporative Cooler
– Inlet Chiller Coils
– Ancillary Support Frame
Solar Turbines IncorporatedP.O. Box 85376San Diego, CA 92186-5376 U.S.A.
Caterpillar is a trademark of Caterpillar Inc.Solar, Taurus, SoLoNOx and Turbotronic are trademarks of Solar Turbines IncorporatedAll other trademarks are the intellectual property of their respective companies..Specifications subject to change without notice. Printed in U.S.A.© 2003 Solar Turbines Incorporated. All rights reserved.DS70PG/103/1M
FOR MORE INFORMATION
Telephone: (+1) 619-544-5352Telefax: (+1) 858-694-6715Internet: www.solarturbines.com
TAURUS 70Gas Turbine Generator Set
Available PerformanceNominal Performance*
Output Power, kWe 7520
ISO: 15°C (59°F), sea level
Heat Rate, kJ/kWe-hr 10 650
(Btu/kWe-hr) (10,100)
Exhaust Flow, kg/hr 97 000
(lb/hr) (213,840)
Exhaust Temperature, °C 490
(°F) (910)
* No inlet or exhaust lossesRelative humidity 60%Natural gas fuel with
LHV = 31.5 to 43.3 MJ/nm3
(800 to 1100 Btu/scf)
Left Side
• Lube Oil: Cooler, Drain, Vent
• AC Power
– Starter Motor
– Liquid Fuel Pump
– Pre/Post Lube Pump
– Oil Tank Heater
• Package Ground
• DC Power, Backup Lube Pump
• Lube Oil Tank Drain
Aft End
• Combustor and ExhaustDiffuser Drains
• Fuel: Inlet, Filter, Drain, Vent
• Auxiliary Air (optional) for:
– Liquid Fuel Atomizing
– Self-Cleaning Filter
• Turbine Cleaning
• Turbine Drip Pan Drain
Typical Service Connections
Length: 11 278 mm (37’ 0”)
Width: 2932 mm (9’ 7-7/16”)
Height: 2743 mm (9’ 0”)
Approximate Weight (dry):
50 314 kg (110,923 lb)
Package Dimensions
Forward End
• Turbine Control Box
• Generator Drip Pan Drain
• Package Ground
• Generator Control Box
• Generator Terminal Box
DS70IPG-003M
Forward End Left Side Aft End
F16F16F15F15F14F14F13F13F12F12F11F11F10F10F9F9
F8F8F7F7F6F6F5F5F4F4F3F3F2F2F1F1
7 8 9
4 5 6
1 2 3
. 0 -
10105 6 7 8 9
1 2 3
16161111 1212 1313 1414 1515
22221717 1818 1919 2020 2121
4
28282323 2424 2525 2626 2727
11
9
7
5
3
1-40 (-40) -20 (-4) 0 (32) 20 (68) 40 (104)
INLET AIR TEMPERATURE, ˚C (˚F)
OU
TP
UT
PO
WE
R A
T G
EN
ER
AT
OR
TE
RM
INA
L, M
We
24 (82)
22 (75)
18 (61)
14 (48)
10 (34)
250 (482)
300 (572)
400 (752)
450 (842)
500 (932)
108 (238)
104 (229)
100 (220)
96 (212)
92 (203)
88 (194)
84 (185)
Fuel Flow, MW (MM Btu/hr)
Exhaust Flow, Thousands kg/hr (lb/hr)
Exhaust Temperature, ˚C (˚F)
DS70IPG-002M
Full Load Output
350 (662)
12 (41)
16 (55)
20 (68)
26 (89)
Right Side
• Lube Oil Tank Vent