FdF 20141104 RIMPlusJw - European Commission...Brussels, November 4, 2014 – RIMPlus Workshop...
14
RIMPlus Regional Showcase Workshop 4 / 11 / 2014 Let’s talk about the future Catalan factories
Transcript of FdF 20141104 RIMPlusJw - European Commission...Brussels, November 4, 2014 – RIMPlus Workshop...
RIMPlus Regional Showcase Workshop 4 / 11 / 2014
Let’s talk about the future Catalan factories
Brussels, November 4, 2014 – RIMPlus Workshop
Catalan industry
✓ Catalan manufacturing sector is still relevant ✓ 20’6% GDP in 2013 ✓ Near 85% are SME ✓ Great capacity to adapt the companies, to
innovate and reaction ✓ Slow decrease of cooperation from 90’s ✓ Difficult cooperation with RTOs
Group stablished during the second half of 2010
Brussels, November 4, 2014 – RIMPlus Workshop
About Connect-‐EU
15 GROUPS !
RUNNING
• INFORMATION AND COMMUNICATION TECHNOLOGIES (Societal Challenges and Future Internet).!
• SUSTAINABLE TRANSPORT.!• FACTORIES OF THE FUTURE.!• AGRO-FOOD.!• SUSTAIBALE CATALYSIS.!• PHOTONICS AND ELECTRONIC SYSTEMS.!• NANOBIOTECHNOLOGY AND
NANOMEDICINE!• SOCIAL SCIENCES AND HUMMANITIES!• MEDICAL TECHNOLOGIES!• ENERGY!• MATERIALS!• MULTIMEDIA, MOBILE AND INTERACTIVE
APPLICATIONS!• HEALTH!• WATER TECHNOLOGIES!• AEROSPACE
Brussels, November 4, 2014 – RIMPlus Workshop
To promote the activity and the participation of the Catalan manufacturing industries in the public-‐private partnerships related with Research and Innovation, both at local and also at International level. !
• Common Thematic strategic agenda.
• Collaboration with NCP.
• Representation at the European Technology Platforms
• Promotional activitites at the regional level
• Evaluation experts.
• Participation in events at their regional and European level
Objectives
Brussels, November 4, 2014 – RIMPlus Workshop
Starting point
Brussels, November 4, 2014 – RIMPlus Workshop
Market orientation
“Factories of the future PPP. Strategic multi-‐annual roadmap”. Directorate-‐General for Research, Industrial Technologies, Unit G2 “New generation of products”, ISBN 978-‐92-‐79-‐15227-‐6, European Union, 2010
Production equipment
Consumer goods
Automotive Health care products
Sustainable manufacturing
Intelligent manufacturing
High performance manufacturing
New materials for manufacturing
Brussels, November 4, 2014 – RIMPlus Workshop
Members
• Group leader: Ascamm Technology Centre !• Industrial groupings: AMEC and UPM !• Industries: Avinent ,Telstar, Indo, Zanini, Tecalum, La Farga Group, AIA, T-‐Systems, Pedro Roquet, Isovolta, Reiter, Martin Lloveras, Optimus, Continental Automotive, Kostal, Industrias Teixidó, Germans Boadas, Seat, STE Pharmapack, Gestamp, Taurus, Flubetech, Some, Miquel Costas & Miquel, J.Esquerda, Coniex, Comforsa, Girbau, Birpocel, Aigudepluja, IXS Dask Mikro, Promaut, Kostal Electric, Visteon, S&P, Eurofragance, Gamo, Madel Air, Inngenia, Brose, Reiter, Industrias Fita, Bigas Alsina, Grober, Enco Opertaions Management, Continental Automotive, Gutmar… !• Research organizations: Politechnical University of Catalonia, University of Girona, University of Barcelona, Cenfim, CTM, Leitat and Chemical Institute of Sarria.
Brussels, November 4, 2014 – RIMPlus Workshop
Activities• 6 discussion sessions focused in pre-‐selected technological area. • 2 restricted workshops for limited sectorial industries.
• Position papers at European and regional level. • Short list of industrial experts, with a world class curricula.
Dynamics of the discussion sessions1. Introduction and presentation of participants.
2. Opening the minds: 15 minutes performance by an expert in creativity
3. Warming-‐up the brains: 15 minutes presentation by an expert in the tech field.
4. Parallel discussion tables.
5. Wrap-‐up and open discussions.
6. Networking lunch.
Brussels, November 4, 2014 – RIMPlus Workshop
The Strategic Agenda for the Manufacturing Sector in Catalonia
Brussels, November 4, 2014 – RIMPlus Workshop
Involvement with the Catalan RIS3 definition
• Permanent communication with regional policy makers, innovation and entrepreneurship agencies. !• Open debates and discussions with the most representative large industries of the region. !• Bilateral meetings with stablished business clusters with relevant links to the manufacturing industry.
• Dissemination and promotion of the exercise being done. !• Founding the RIS3 Community on Advanced Manufacturing
INDUSTRIAL SYSTEMS
Brussels, November 4, 2014 – RIMPlus Workshop
RIS3-‐COMMUNITY ON ADVANCED MANUFACTURING
Advanced Manufacturing!• Industry • Public organisms • Society • End-‐users • Research and Academia
• Increasing productivity !• Manufacturing cost reduction through ZDM !• Ultra-‐high precission manufacturing !• Energy efficiency at factory level !• Traceability and product customisation !• Production flexibility
Brussels, November 4, 2014 – RIMPlus Workshop
Enabling technologies of interest
IT for manufacturing
Automation, Robotics and Embedded Systems
Additive manufacturing
New materials and surface engineering for manufacturing
Tech-‐ d
evelop
ers Industrial users
Brussels, November 4, 2014 – RIMPlus Workshop
Technological Innovation requires expertise, knowledge, continuity and cooperation.
Let’s work together to keep competitiveness of the manufacturing Catalan sector
Human skills, technology knowledge and smart use of
resources to grow-‐up a sustainable Catalan industry.
www.castellersdevilafranca.cat
Contacts: !Joan Guasch [email protected] !Fundació Privada Ascamm Parc Tecnològic del Vallès Av. Universitat Autònoma 23 08290 Cerdanyola del Vallès
Thanks for your attention!
!!Carles Miranda [email protected] !ACCIÓ Passeig de Gràcia, 129 08008 Barcelona !
