Evoline data modules uk

225

EVOline® Data Modules

226226

Central wiring

Structured Cabling in Buildings

The structured wiring of building is described in the EN 50173.There basically two kinds or topologies are mentioned:

1. The Central wiring structure

The centralised wiring makes sense when link lenghts are small (below 90 m) or in case of a pure light wave cabling.

Doing this the individualparticipants are linked directly or via passive subdivisions.

In a central room (server switchboard) where the entire active equipment is kept than all the cable merge.

Plug faces forCopper cabling

RJ 45 GG 45 TERA

Participants will be connected directly

Attention!Using a maximum of90 m Copper

At LWL wiring300m to 2000m,depending onthe application

Passive subdistributorat LWL wiring

Cabl

e w

ith

48 t

o 14

4 fi

bers

Central server

cable with 4 fibers

cable with 4 fibers

227227

Decentral wiring

2. The decentral cabling structure

Within the area of horizontal cabling the medium Copperis used for subdivision to the floors and therefore thesupply of work places. Within the dividers the wiringis continued with the medium fiber optic cables.

These are merged normally inside the building distributor(server switchboard).Both alternatives have theirspecific advantages and dis-advantages which have to beregarded according to the utilised situation.

Categories and frequencies of Copper components are divided into so calledcategories. Their various parameters are described in a certain frequency range. Every category stands for a performance frequency.

CAT 5e 125 MHzCAT 6 250 MHzCAT 6A 500 MHzCAT 7 600 MHzCAT 7A 1000 MHz


Horizontal wiring

Copper cable

Copper cable

Cupboardwith activeequipment

Attention!Using a maximum of90 m Copper


Copper cable

Copper cable


Copper cable

Copper cable

Central server

Backbone with 4 to 48 fibers

WAN / campus

228228

Info / Certificates Reichle & De-Massari

Category 6 REAL10 connection unit Category 6A connection unit

Reichle & De-Massari Category 6 and Real106A connector units

For the data network connection in our systemEVOline® we favour the products of company

Reichle & De-Massari (R&M).For more than 45 years the Swiss family enterpriseis one of the distinguished

The category 6 REAL10 system from R&M fulfills the cate-gory 6 demands of standards ISO/IEC11801:2002, DIN EN50173-1:2007-12 as wellas ANSI/TIA/EIA 568 B.2 1. It has been tested and certi-fied according to the „de embedded“-measuringprocedure of standard IEC 60603 7 5, interoperable and downwards compatible tocategory 5 and 5e.Tested according to R&M manufacturing control with 100% single conformityinspection as well as the per-manent quality control by the „GHMT PREMIUM VerificationProgram“.

It can be combined withcategory 6 systems of other brands. Furthermore it is suitable for the installation of transmission channels class EA according to ISO/IEC11801 AMD1 (4 Connector-Channel) and thereforeconstructed for 10GBaseT-applications accordingto IEEE 802.3an up to 500MHz and 100 m. Condition is a consistent network cabling with R&M REAL10-components, in-cluding RJ45 shunting and connection cable.The category 6A system from R&M offers even more system reserve compared to the cate-

gory 6 system.It fulfills the category6A-requirements of compo-nent standard according to ISO/IEC 11801: AMD2.This must not be confusedwith category 6A(notation: no set down„A“) according to standardNSI/TIA/EIA 568 B.2 10, which accepts components with lower performance.

The category 6A system fromR&M has been tested and certified according to the „re-embedded“ measuring procedure of standard IEC 60603-7-41 (UTP) respectively-51 (STP).

It is interoperable and down-wards compatible to category6, 5 and 5e. Tested according to R&Mmanufacturing controlwith 100% single conformityinspection as well as perma-nent quality control by “GHMTPREMIUM VerificationProgram“. It can be combined with cate-gory 6A systems of otherbrands. It is constructed for 10GBase T-applicationsaccording to IEEE 802.3an at 500Mhz and 100 m length.

229229


Examples of existing certificates.More certificates ordata sheets available if required.

One of the top manufacturers and suppliers in the communi-cation cabling industry.

These systems comply to the highest quality and standards for the data and communication network.

230230

Data platewith 1 telephone and data port(Reichle & De-Massari)Snap InInstallation dimension: 25 x 50 mm

with 3,0 m cable * and plug

Fits profile:1

RJ45 CAT5 unshielded*Cable extension ordered separately

RJ45 CAT5e shielded*Cable extension ordered separately


RJ45 CAT6 shielded*Cable extension ordered separately

RJ45 CAT6A shielded*Cable extension ordered separately

9330 8400 0000

9330 7850 0000

9330 8270 0000

9330 7860 0000

9331 0020 0000

Data platewith 1 telephone and data port.Angular outlet with a label field(Reichle & De-Massari)Snap InInstallation dimension: 50 x 50 mm

3,0 m cable * and plug

Fits profile:2,3,4,5,6,7,8,9






9331 0000 0000

9330 6130 0000

9331 0010 0000

9330 6140 0000

9331 0030 0000

Data platewith 2 telephone and data ports.Angular outlet with a label field(Reichle & De-Massari)Snap InInstallation dimension: 50 x 50 mm

with 3.0 m cable * and plug

Fits profile:2,3,4,5,6,7,8,9






9330 4330 0000

9330 1220 0000

9330 4340 0000

9330 1230 0000

9331 0040 0000

Article Picture Specification Type


* Cable length measured from the position of the connection field inside the profile. Other cable lengths per meter on request.

231231



Data platewith 1 telephone and data portand label field(Reichle & De-Massari)prepared for Security Systems 1-3 Installation dimension: 50 x 50 mm


Fits profile:1






9330 4620 0000

9330 2520 0000

9330 4630 0000

9330 2530 0000

9331 0050 0000

Data platewith 1 telephone and data port.Angular outlet with label field(Reichle & De-Massari)prepared for Security Systems 1-3 Installation dimension: 50 x 50 mm


Fits profile:2,3,4,5,6,7,8,9






9330 4350 0000

9330 2500 0000

9330 4360 0000

9330 2510 0000

9331 0060 0000

Data platewith 2 telephone and data ports(Reichle & De-Massari)prepared for Security Systems 1-3 Installation dimension: 75 x 50 mm


Fits profile:2,3,4,5,6,7,8,9






9330 4640 0000

9330 2540 0000

9330 4650 0000

9330 2550 0000

9331 0070 0000


Ordering accessoires for the security systems see page 286-287

232232

Info / Certificates NEXANS

EVOline® with Nexans LAN-mark-7A GG45 connectorswitches the channel mode to 1000 MHz

Nexans LANmark-7A Cat7patch cable with GG45 plugswitch and GG45 channel in1,000 MHz mode. The protruding plastic element on the GG45 plug activates the switch in the GG45 socket. The RJ 45 contacts 3, 4, 5 and 6 not used in Cat7 mode are grounded. By utilization of the outer RJ45 contact 1/2 and 7/8 with the lower placed GG45 contacts 9/10 and 11/12, excellent NEXT and RL values are achieved!

Nexans LANmark-7 patch cable maximize the entire capacity of a system-channel and fulfill the requirements for an ISO 4 connector model. This ensures full data turnover up to 1,000 MHz and permits the inclusion of additional patch connections or Con-solidation Point applications.All of this ensures an optimalsystem flexibility for supportof all future data applicationsaccording to ISO 11 801.

Socket GG45• Highspeedmultimedia patch cable• screened• 2xGG45plug,4pairs• notreversecompatible with RJ45• reliableconnectionduring entire netword durability• compatibletoclass FA standard (ISO 11801:2008 A1)• compatibletoSOHOstandard (ISO 15018)• audiblysnappingin• noerroneousplugginginto RJ45 sockets by mechanical encoding• standardizedCat7standard GG45 (60603-7-7)

• standardversion: halogen free, flame resistant• colourofcoating,standard orange, other colours on request• 3mand5marestandard lengths, more lenghts on request

The GG45 socket is reverse compatiable and can be used for standard RJ45 connectors

233233


Utilization

The plug connector LAN-mark-7 GG45 supports applications for the categories of Cat5, Cat5e, Cat6, Cat6A, Cat7 up to Cat7A according to IEEE802.3.AN.

Performance

The LANmark-7 GG45 Snap-In plug connection has been de-veloped to achieve the highest performancein Cat6A, Cat7 and Cat7Aand Broadcast-applications (like e.g. ISO 15018 residence wiring).The GG45 has an excellent performance for the damping (insertion loss), and back flow damping. A metal cross inside the plug takes care of the high NEXT performance in Cat6A and Cat7A mode. The excellent return loss values of LANmark-7 GG45 are suitable for all possible data applications andalso serve the support of CATVsignals up to 1.000 MHz.

Examples of existing certificates.More certificates ordata sheets available if required.

234234




Dataplatewith 1 telephone-/data portwith label field and dust cover(Nexans)Installation dimension: 50 x 50 mmBlack

with 3.0 m cable halogen free*and plugs

Fits profile:1

RJ45 CAT6 unshielded*Cable extension LANmark6ordered separately

RJ45 CAT6 shielded*Cable extension LANmark6ordered separately

RJ45 CAT6A shielded*Cable extension LANmark6Aordered separately

9330 6990 0000

9330 7010 0000

9331 0080 0000

Dataplatewith 2 telephone-/data portswith label field and dust cover(Nexans)Installation dimension: 50 x 50 mmBlack


Fits profile:1




9330 7000 0000

9330 7020 0000

9331 0090 0000

Telephone with a data port GG45Angular field outlet with labeland dust cover(Nexans)Installation dimension: 50 x 50 mmBlack


Fits profile:1

GG45 CAT7 shielded*Cable extension LANmark7ordered separately

GG45 CAT7 shielded*Cable extension LANmark7Aordered separately

9330 7030 0000

9331 0100 0000

Telephone with two data ports GG45Angular field outlet with labeland dust cover(Nexans)Installation dimension: 50 x 50 mmBlack


Fits profile:1



9330 7040 0000

9331 0110 0000

Data plate with a telephone -/ data portAngular with label field and dust cover (Nexans)Installation dimension: 50 x 50 mmBlack


Fits profiles:2,3,4,5,6,7,8,9




9330 7050 0000

9330 7070 0000

9331 0120 0000

235235

Data plateTelephone and data ports with twoportsAngular outlet with label fieldand dust cover(Nexans)Installation dimension: 50 x 50 mmBlackwith 3.0 m cable halogen free *and Plugs





9330 7060 0000

9330 7080 0000

9331 0130 0000

Telephone with data ports GG45Angular field outlet with labeland dust cover(Nexans)Installation dimension: 50 x 50 mmBlackwith 3.0 m cable Halogen free *and Plugs




9330 7090 0000

9331 0140 0000

Telephone with data ports GG45Angular field outlet with labeland dust cover(Nexans)Installation dimension: 50 x 50 mmBlackwith 3.0 m cable Halg free *and Plugs




9330 7100 0000

9331 0150 0000




236236

Info AMP TYCO

EVOline® with AMP TycoData Systems

Standard connectors forthe next Copper cable generation, TERA®

Frankfurt – For the second time the International Electrotechnical Commission(IEC) has chosen the interfacebased on the TERA® connector as the standard interface for a new high performance cabling category. The IEC therefore decides again for the standardIEC 61076-3-104 Ed. 2.0 which is based on the TERA® interface.

The Class FA is specified for an upper limit frequency of 1.000 MHz and is to support the future generation of dataapplications of more than 10GBASE-T as well as all cable television frequencies.In order to create the precon-ditions for the future Class FA parameters, the plug connec-tor specifications which areincluded in IEC 61076-3-104, Ed. 2.0 raise the upper limit frequency of symmetricaltwisted-pair-plug connectorsof 600 MHz (with category 7) to now 1,000 MHz.

But notebooks and computers are still fitted with the familiar RJ45 components due to cost reasons. Therefore the TERA® connector is not the usual connection type at the users (e-place).

Schulte Elektrotechnik solves this connection via its interfaces in a classic manner.

The connection between work-place (EVOline® Dock) to the consolidation point has been equipped with the highest category as RJ45 components.

underfloor

working place

plug CAT7A (TERA®)

plug RJ45

From there the path leads via high performance data cables to the TERA® plug which is then connected to the right slot of the Consolidation Point.

237237

Data platewith 1 telephone and data port(AMP TYCO)Installation dimension: 25 x 50 mm

with 3,0 m cable *and TERA® plug CAT7A

Fits profile:1


9330 9600 0000

Data platewith 1 telephone and data portAngular outlet with a label field(AMP TYCO)Installation dimension: 50 x 50 mmwith 3,0 m cable *and TERA® plug CAT7A

Fits profile:2,3,4,5,6,7,8,9


9330 9610 0000

Data platewith 2 telephone and data portsAngular outlet and label field(AMP TYCO)Installation dimension: 50 x 50 mmwith 3.0 m cable *and TERA® plug CAT7A

Fits profile:2,3,4,5,6,7,8,9


9330 9620 0000

Data platewith 1 telephone and data port(AMP TYCO)Installation dimension: 25 x 50 mmwith 3,0 m cable * and plug RJ45

Fits profile:1

RJ45 CAT6 shielded Cable extension ordered separately

9330 9630 0000

Data platewith 1 telephone and data portAngular outlet with label field(AMP TYCO)Installation dimension: 50 x 50 mmwith 3,0 m cable * and plug RJ45

Fits profile:2,3,4,5,6,7,8,9


9330 9640 0000




238238

Data platewith 2 telephone-/ data portsAngular with label field(AMP TYCO)Installation dimension: 50 x 50 mmwith 3.0 m cable * and plug RJ45

Fits profile:2,3,4,5,6,7,8,9


9330 9650 0000

RJ45 CAT5e shielded 9330 1210 0000

Data platefor two telephone-/data portsAngular (Panduit)Bushes loosely enclosedInstallation dimension: 50 x 50 mm

without cable

Fits profile:2,3,4,5,6,7,9

RJ45 CAT6 shielded

RJ45 CAT5e shielded

9330 1200 0000

9330 1190 0000

Data platewith two phone / data portsSystimax (Avaya) GigaSPEEDInstallation dimension: 50 x 50 mmwith 3.0 m cable * and plug

Fits profile:2,3,4,5,7,9

CAT6 unshielded 9330 4550 0000

Data platewith 2 phone / data portsSystimax (Avaya) GigaSPEEDInstallation dimension: 50 x 50 mm


Fits profile:1

CAT6 unshielded 9330 4370 0000




Data platewith two telephone-/data portsAngular (Panduit)Installation dimension: 50 x 50 mm


Fits profile:1

239239

9330 1210 0000

9330 1200 0000

9330 1190 0000

Dataplate, LAN Switch6 Port Fast Ethernet Switch(Microsens)4 x 10/100TX, 2 x 10/100Base-TXintegrated power supply 230 VmanagementVLANs with logical isolationindividual services (networkmanagement, Voice over IP,Internet access)Packet prioritisation (QoS)Mounting dimension: 150 x 50 mm

Fits profile:1,9

Black

4 horizontal ports accessible from the outside2 ports inside the profile,one port with 3 m cableCAT6 routed to outside

Cable extension ordered separately

9330 7960 0000


Fits profile:1,2,3,4,5,6,7,8,9

Black

4 horizontal ports accessible from the outside2 ports inside the profile,one port with 3 m cableCAT6 routed to outside


9330 7970 0000





Fits profile:1,9


Fits profile:1,2,3,4,5,6,7,8,9

Black

4 ports horizontal, accessible from outside. 2 ports inside of the profile, 1 port is led to the outside with a 3 m data cable CAT 6.


Black

4 ports horizontal, accessible from outside. 2 ports inside of the profile, 1 port is led to the outside with a 3 m data cable CAT 6.


240240

Modular-Adapter RJ 45

The modular RJ45 adapter is an interfacefor connecting two patch cables (data cables with RJ45 male / male).A consolidation point cable runs to the workplace, here it is contacted via a modular adapter which is located at the workplace (E.g. EVOline ® Dock).Each user can then connect with thenetwork, using a patch cable (RJ45cable with male / male)

Data platewith a modular adapter(Elbro)wired RJ45 to RJ45, 1:1for patch cableInstallation dimension: 25 x 50 mm

Fits profile:1

RJ45 CAT6 unshielded

RJ45 CAT6 shielded

9330 6550 0000

9330 8410 0000

Data platewith a modular adapterAngular with label field(Elbro)wired RJ45 to RJ45, 1:1for patch cableInstallation dimension: 50 x 50 mm

Fits profile:2,3,6,8,9


RJ45 CAT6 shielded

9330 6560 0000

9330 5880 0000

Data platewith two modular adapterAngular with label field(Elbro)wired RJ45 to RJ45, 1:1for patch cableInstallation dimension: 50 x 50 mm

Fits profile:2,3,6,8,9


RJ45 CAT6 shielded

9330 6570 0000

9330 3920 0000



241241

RJ 11 for telephone

Data platewith a telephone port RJ11(Elbro)Installation dimension: 25 x 50 mmRJ11 unshielded

Fits profile:1,6,8

with 3,0 m cable * and plug RJ45 9330 6620 0000

Data platewith a telephone port RJ11Angular with label field(Elbro)Installation dimension: 50 x 50 mmRJ11 unshielded



Data platewith two phone ports RJ11Angular with label field(Elbro)Installation dimension: 50 x 50 mmRJ11 unshielded






Evoline data modules uk

Documents

Transcript of Evoline data modules uk