EVERDIGM Mining Solution - DTHregion-vostok.ru/sites/default/files/sales_manual_d700...(2015.12~)...
Transcript of EVERDIGM Mining Solution - DTHregion-vostok.ru/sites/default/files/sales_manual_d700...(2015.12~)...
EVERDIGM Mining Solution - DTH
Top-hammer drill rigs
Down The Hole Drill rigs
Exploration drill rigs
Rocktools
ü Product line-up
ü Working Capacity
ü Overall Machine Structure
ü Major features
ü Specifications
ü Standard Equipment
ü Optional Equipment
ü Specifications Chart
ü Market Positioning
ü Easy Operation
ü R&D Capability
ü Certification
ü Marketing & Promotion
ü Customer Service
EVERDIGM DTH drill rigs
Contents
Product line-up
Top Hammer Rock Tools
DTH Hammers& Bits
OverburdenDrilling Tools
Drilling EquipmentEVERDIGM
Drilling ToolsEVERDIGM ROCKTOOLS
THD Drill Rig DTH Drill Rig Multi Drill RigCore Drill Rig
Blast HoleDrilling (THD)
Blast HoleDrilling (DTH)
Geo-thermal & Well Drilling
Construction Drilling(Piling & Anchoring)
Exploration Drilling (RC)
• T350/ECD35• T400/ECD40• T450/ECD45• T500/ECD50
(2015.06~)• T550/ECD60
(2015.12~)
• D700D800(2016.01~)
• ECR12• ECR18
• EMR08• EMR16
(2015.06~)
Coring Tools & RC Hammers(2014~)
Ø Hole-diameter range
Working Capacity
Ø Maximum Hole Depth
Working Capacity
Hydraulic Pump
Engine
Compressor
Feed
Hydraulic Rotation unit
Cyclone
Cabin
Dust Collector
Overall Machine Structure
ü Built in Korea
ü Durable mast structureü Adapting Drawn steel profile &ü Spring steel platesü Slide Pad to minimize friction &üWear of sliding area
Rotary Head
Cabin
Engine & Air Compressor
ü Cylinder + Rope Feed moving system
ü Joy-stick controlü CAT C13 Tier3 Engine Installedü Pump-Engine-Comp. Direct mountingàMinimize loss of engine power
ü Compressor : GHH (Germany)
Monitoring System
ü Color display, touch screen
Mast & Drilling System Feed System
Overall Machine Structure
Engine
Caterpillar C13 440HP@1,800rpm Tier III / stage 3
Hydraulic System Compressor
HR2.5 (GHH land)Max. 25 bar 363 psi883cfm (25 m³/min)
Kawasaki K3VL 112ccAxial Piston PumpHydraulic oil tank capacity98 gal (370 liter)
Direct Connection
Major Features
Hydraulic Rotation Unit
ERD65Max RPM 53 RPMMax Torque 5,700 Nm
Feed Cylinder + Rope System
Feed System
Major Features
Feed system
Ø Feed force, max 8,992 lbf (40 kN)Ø Tractive pull, max 11,240 lbf (50 kN)
Major Features
Hammer, Bit, Tube Combination Chart
Hammer size 4 inch 5 inch 6 inch
Bit size mm 102 ~ 127 127 ~ 152 152 ~ 178
inch 4 ~ 5 5 ~ 6 6 ~ 7
Top Sub Thread inch 2 - 3/8 (3.5) API Reg Pin 2 - 3/8 (3.5), 2 - 7/8 (4), 3 - 1/2 (4.5~5) API Reg Pin
Applicable Tube mm 89 89 ~ 114 102 ~ 127
inch 3.5 3.5 ~ 4.5 4 ~ 5
Specifications – Bit & Hammer & Tube Combination
** Remark : Inner Bracket, Hub, Shaft and Space must be changed upon the applied tube size
Inner Bracket Hub Shaft Space
Main SpecificationHole Diameter Range 4.5“ ~ 7.0" (115 ~ 178mm)DTH Hammer Range 6", 5", 4"Drill Tube Diameters 3.5", 4" and 4.5" (89, 102 and 115mm)Drill Tube Length 20', 16', 13' (6m, 5m, 4m)Max. Hole Depth 180' (55m)Engine Output 328 kw (440hp) / 1,800 rpmAir Delivery 883cfm (25 m³/min)Air Pressure Two stage screw type, 25 bar Transport Weight 54,013 lbs (24,500 kg)Transport Width 8.2' (2,500mm)
DimensionsWeight 54,013 lbs (24,500 kg)Overall Height 13' (3,950 mm)Overall Length 36' (11,000 mm)Overall Width 9.9' (3,020 mm)Transportation Height 11.5' (3,500 mm)Transportation Width 8.2' (2,500 mm)
Specifications - General
Double Clamp
Rear Stabillizer
Centralized Greasing System
Monitoring SystemAuto Lubrication
Standard Equipment
Remote monitoring system
• GPS positioning• Performance & condition monitoring with GSM access• Remote control via World Wide Website
Hydraulic Winch
• Winch Model : YAK-5• Lifting Capacity : 2,268kg (8mm / 40 or 60m)• Lifting drill tube for installing and removing from ARC
Water misting system
• Indispensable application in broken or unstable ground, soil.• Prevent hole crumbling and bit jamming during drilling.• Dramatically improve drilling efficiency and productivity.
Cold climate kit
• Engine start below -50°C temperature• Engine coolant hitting system by diesel fuel• Auto timer embedded • Webasto installed
Optional Equipment
Rear View Camera
• To check an object on the rear side for safety• Model : Doctor 700• Spec : 7”, 24V / 120 degree of lens angle
Start Motor Shut down Switch
• To cut electric line completely for parts safety during maintenance
Manual Pump for filling Hyd. Oil
• To provide oil with manual lever from the ground to oil inlet(For refilling Hyd. oil in a job site)
Electric Re-fueling pump
• It is fuel pump operated by electric control(For refilling fuel in a job site)
• Model : DPF45s-24 (45 lpm / 24V)
Optional Equipment
SortEVERDIGM
D700Atlas Copco
D60SandvikDI550
FurukawaDCR20
Engine PowerCaterpillar
C13 440HP@1,800rpmCaterpillar
C13 440HP@1,800rpmCaterpillar
C13 440HP@1,800rpmCaterpillar
C13 440HP@2,100rpm
Compressor25m3/min
25bar24.3m3/min
25bar24.4m3/min
24bar24.3m3/min
25bar
Hole Sizeinch 7 7 6.5 6.5
Drill Depth(Rod Diameter)
55m 55.5m (89-114mm) 31.5m (127-140mm)
40m 40m
Specification Comparison
Market Positioning
ü Low Initial Investment
ü Drilling Performance
ü Economical Operating Cost
ü Top Brand from Korea
ü Alternatives for Global Top Brand
Value
Down The Hole Drill (Blast-hole)
Price
AtlasCopco
Sandvik
Furukawa
Everdigm
Junjin
Comfort and Safe for Operator
ü Easy Joy-stick Control
Hydraulic and electronic combine
ü Spacious and well designed cabin for
more comfortable operation
üAir-conditioning and heater as standard
ü ROPs and FOPs approved cabin
ü Noticeable monitoring system
Easy Operation
Ø Developing the Product Life cycle Management(PLM) system based on such as 3D design.
Ø 15 people for R&D center
Ø Repeated simulation from design to production to reduce product design failure.
Ø Utilizing highest level of quality control and manufacturing process
Ø Stress analysis simulation
Advanced Technology
R&D Capability
Ø Obtained certificates : ROPS, FOPS, CE, GOST,RTN, ISO 9001, 14001,
Ø PL (Product Liability) Insured with worldwide coverage
Certification
• Exposed in all major exhibitions
• Active public relations by advertisement
Bauma China 2014 in Shanghai Bauma 2010 in Germany
Intermat 2012 in Paris
Marketing & Promotion
Ø Customized Education Program based on the level of customer
Ø Fast response and customer oriented attitude.
Ø Giving practical solution working with major components company.
Ø Professional technicians and engineers with foreign language and drilling terminology.
Supportive & Committed
Customer Service
D700EVERDIGM DTH DRILL RIGSREFERENCE
Sakha, Russia ü Gold Mining
Reference for D700
Reference for D700
D700 Main Specification
Hole Diameter Range 4.5“ ~ 7.0" (115 ~ 178mm)
DTH Hammer Range 6", 5", 4"
Drill Tube Diameters 3.5", 4" and 4.5" (89, 102 and 115mm)
Drill Tube Length 20', 16', 13' (6m, 5m, 4m)
Max. Hole Depth 180' (55m)
Engine Output Caterpillar C13328 kw (440hp) / 1,800 rpm
Air Delivery 883cfm (25 m³/min)
Air Pressure Two stage screw type, 25 bar
Transport Weight 54013 lbs (24,500 kg)
Transport Width 8.2' (2,500mm)
Working Condition (May.08th ~ July.10th, 2015)
Location Sakha, Russia
Temperature -20⁰ C ~ 5⁰C
Jobsite Gold Mining
Delivery date 2015-05-04
Working hours / day 20 Hours
Engine Working Hours / total 1,200 Hours
Rotation Unit Hours / total 780 Hours
Working hours / day 24 Hours
DTH Hammer 6 inch
Drill Tube Length 6 m
Avg Drilling depth / hole 13 m
Drilling Depth / day 840 m
Drilling Depth / total 27,300 m
Hole quantity / day. 45 ~ 50 holes
Reference for D700
ü Hole diameter 6 inch
Reference for D700
üHole depth per day : 600 m
üHole quantity per day : 46 holes
Reference for D700
EVERDIGM’s new D700 DTH drill model has the highest drilling power among equivalent models. It has simple structure so we expect easy maintenance. Spare parts are available, service is fast and people are very supportive. So we can focus on drilling only. I already signed two more rigs after two weeks test.