European Requalification System Emrah T. SAK March 2013.
-
Upload
thaddeus-townsell -
Category
Documents
-
view
223 -
download
1
Transcript of European Requalification System Emrah T. SAK March 2013.
European Requalification System
Emrah T. SAK March 2013
Today’s Outline
Brief Information About EVASBrief Information About EVAS
Periodic Inspection in EuropePeriodic Inspection in Europe
General Information About Related EN StandardsGeneral Information About Related EN Standards
Refurbishment ProcessRefurbishment Process
ABOUT EVAS
• The first LPG cylinder manufacturer of Turkey.The first LPG cylinder manufacturer of Turkey.
• OOne of the biggest LPG ne of the biggest LPG ccylinder ylinder producersproducers in Europe in Europe..
• SHV ENERGY companySHV ENERGY company
• AAnnually nnually around 2around 2 million cylinder million cylinderss productionproduction..
• Annually around 600.000 cylinders refurbishment.Annually around 600.000 cylinders refurbishment.
• Active in 5 Continets, 49 Countries all around the WorldActive in 5 Continets, 49 Countries all around the World
Power to Contain World’s Energy
ABOUT EVAS
İstanbul-New Cylinder Manufacturing
Ankara- Refurbishment
İzmir- Refurbishment
Today’s Outline
Brief Information About EVASBrief Information About EVAS
Periodic Inspection in EuropePeriodic Inspection in Europe
Periodic Inspection Period
Working life of cylinder?Working life of cylinder?
There is no calculated life span for LPG cylinders
Periodic Inspection Period
Average life span of cylinders:
-In West Europe 41 years -In Turkey 32 years-In UAE (officially )15 years-In Malesia 11 years
Malesia-Cylinder Distribution
Number of received cylinders in 2012: 550.000 units
Testing without repair: 87.000 units
Testing with repair: 326.000 units
Scrap: 137.000 units
EVAS Refurbishment Factories-2012
Luxembourgish Company
Number of received cylinders in 2012: 680.000 units from 5 countries
PRESTAGAZ Statistics-2012
0
50.000
100.000
150.000
200.000
250.000
Belgium Netherlands France Switzerland Germany
144.339 162.641 155.334
72.041
20.697
32.897 14.071
6.393
4.521
4.936
36.084 19.697
6.033
2.914
5.678
Scrapped
Repaired
Just Testing
Comparison of Turkish and European Data
Turkey West EuropeRetesting Period: 10 years 10 or 15 years
Distribution of process:
Assessment before retesting period:
Average Life Span:
Average number of retesting during lifespan:
32 years 41 years
66% 11%
6 times 4 times
- Normally for all cylinders Periodic Inspection Period is 10 years.
- It can be extended to 15 years if followings are fulfilled:
Cylinder is be owned by and under the responsibility for checking, filling and maintenance of a competent gas organisation
Periodic Inspection Period in Europe
Periodic Inspection Period in Europe
11 kg German deposit Cylinder15 Years Periodic Inspection
11 kg German Nutzung Cylinder10 Years Periodic Inspection
- Normally for all cylinders Periodic Inspection Period is 10 years.
- It can be extended to 15 years if followings are fulfilled:
Cylinder is be owned by and under the responsibility for checking, filling and maintenance of a competent gas organisation
there must be an external protection against corrosion
Cylinder should be filled in accordance with EN 1439
Periodic Inspection Period in Europe
Today’s Outline
Brief Information About EVASBrief Information About EVAS
Periodic Inspection in EuropePeriodic Inspection in Europe
General Information About Related EN StandardsGeneral Information About Related EN Standards
EN 1439 - LPG equipment and accessories. Procedure for checking LPG cylinders before, during and after filling EN 1440 - LPG equipment and accessories. Periodic inspection of transportable refillable LPG cylindersEN 14912 - LPG equipment and accessories - Inspection and maintenance of LPG cylinder valves at time of periodic inspection of cylinders
European Norms
SCOPE Covers the control operations applied on transportable, refillable LPG cyliders before, during and after filling.
EN 1439
EN 1439
EN 1439 Segregation of Cylinders before Filling
EN 1439 Defects for Rejection
EN 1439 Defects for Rejection
EN 1439 Defects for Rejection
EN 1439 Controls During the Filling
EN 1439 Post Filling Controls
SCOPE Covers the periodic inspection and tests on transportable, refillable LPG cylinders. Periodic inspections/tests shall be carried out by a competent person under the control of an inspection body based on a written scheme and in accordance with the procedures.
It also consists general frame of repair and it is requirements.
EN 1440
EN 1440 Procedures for periodic inspection
Today’s Outline
Brief Information About EVASBrief Information About EVAS
Periodic Inspection in EuropePeriodic Inspection in Europe
General Information About Related EN StandardsGeneral Information About Related EN Standards
Refurbishment ProcessRefurbishment Process
Before-After
Refurbishment
Refurbishment Process in EVAS
Refurbishment De-Gasing & Valve Removing
EX-ZONEEX-ZONE
Detection of liquid gas
2 Gamma radiation sources which detect up to 400 gr gas left in the cylinders.
Drain and gas recovery
Emptying bottles and recovering the gas-in the gas phase or liquid.The recovered gas is stored and re-used. No atmospheric emissions!
Valve removing
All valves removed are stored and inspected later according EN14912 standard or as per customer specs
Internal Washing
Every cylinder is internaly washed in automatic carousel
Refurbishment Washing & Visual Inspection
Visual Inspection
Then cylinders are visually inspected and separated either for repairing or scraping, or conform ones, send to the finishing hall.Inspection is realized by qualified and trained personnel.
Separated Damaged Cylinder
Refurbishment Washing & Visual Inspection
Straighten of Foot-Ring and/or Collar
Changing of Foot-ring or Valve Guard
Blowing
Damaged cylinders are de-dented by means of pressured air and heating of dent zone.
Refurbishment De-Denting
Heat Treatment (stress relieving) at 600-630 oC
Refurbishment
Hydrostatic Testing
Shot Blasting
Zinc Coating
Refurbishment Finishing
Painting Recording•Retest date,•Manufacture date•Manufacturer’s name
Valve Fitting
Refurbishment Finishing
Inkjet MarkingPrinting all information regarding tare weight, test date and next retest date on the cylinders.It allows much more legibility and visibility of all essential information. Leakage Test
Before-After
Refurbishment
No Repairable Cylinders
Bulge Depresed Bung
Lamination
Cut (which exceeds min. thickness)
Depresed Shroud or Foot-ring
Smashed Cylinders
Refurbishment Scrapping
THANK YOU!
AIPGL Mexico City-2013