Ethiopian 1

Roll No. Former Designation Replaced by Title page price (Eth.Birr)

Parameters to be Regulated

ES A.A3 001:1990 Clause 5

ES A.A3.002:1990 Use of Si Units

ES B.W1 001:1990 ES 261:2001 Drinking water-specification 7 6

Clause 4.1 - Physical requirement Clause 4.2.2- Toxic Substance Clause 4.4- Bacteriological level

ES 597 :2001 ES 597 :2012 Bottled drinking water Specification 21 26

• 5.2.1 Physical Requirements • 5.2.2 Palatability • 5.2.3 Bacteriological • 5.2.4 Radioactivity • 5.3.1 Defect

3 ES S.J2. 002:1990 ES 120:2001 Industrial safety-eye protective device 14 12

Clause 3.1 Resistance to change in temperature Clause 3.2 - Uniformity and Grading

3 ES S.J2. 004:1990 ES 122:2001 Industrial safety-eye protector 6 3

Clause 5.1 - Finish Clause 5.2 - Material Clause 5.3 - Ventilation Clause 5.4 - Optical qualities of lenses

List of Ethiopian Mandatory Standards

2

ICS 13.340.01 PROTECTIVE EQUIPMENT IN GENERAL

ICS 01.060 QUANTITIES AND UNITS

1 ES ISO 1000:2001SI Unit and recommendation for the use of their multiple & certain other units 24 29

ICS 13.060.20 DRINKING WATER



ES A .C2. 001 :1990 ES A.C2.002:1990 ES A .C2. 050 :1990 ES A .C2 . 051 :1990

ES 598:2009 Weights of classes E1, E2, F1, F2, M1 , M1-2, M2, M2-3 and M3 18 18

1. Clause 4 - Maximum permissible errors, 2. Clause 5 - Shape, 3. Clause 7 - Material

ES A .C5 . 100 :1990 ES 7:2001 Capacity measures of length 6 2Clause 5 - Metrological requirement

ES A .D5 . 100 :1990 ES 9:2001 Flow meters-liquid fuel measuring devices 12 9

Clause 3 Requirements 3.4.1- General requirements of construction

ES A .C4 050:1990 ES A .C4 100:1990 ES 680:2001 Material measures of length for general use 17 18

Clause 4 Technical requirements

5 ES IEC 60064Tungsten Filament lamps for domestic and similar general lighting purposes-Performance requirements

145 166

• 3.2 Markings • 3.3.1 Lamp dimensions • 3.3.2 Lamp dimensions for E27 caped lamps • 3.4.1 Lamp wattage initial • 3.4.2 Lamp luminous flux initial• 3.5 Lumen maintenance • 3.6.2 Life time

ICS 17.020.01 WEIGHT AND MEASURES

4

ICS 29.020 ELECTRICAL ENGINEERING IN GENERAL



ES IEC 60081 Double –capped florescent lamps performance specifications 249 270

• 1.5.2a Cap dimension in accordance to ES/IEC 60061-1 • 1.5.3 Lamp dimension in accordance with evant data sheet of G13 caps caped lamps • 1.5.4 Starting characteristics in accordance to relevant data sheet value of G13 caps caped lamps • 1.5.5a Initial reading of voltage at the lamp terminals • 1.5.5b Initial power dissipated by a lamp • 1.5.6a Initial reading of luminous flux • 1.5.7 Lumen maintenance of a lamp • 1.5.8a.b Marking all lamp arameters with G13 lamp caps operating with national voltage and & frequency range (230v/50Hz) under data sheet2.3

ES IEC 60086-1 Primary batteries Part 1: General 41 64 • 4.1.2 Battery dimensions in accordance with ES/IEC 60086-2 of clause7 • 4.16.1 Marking • 4.2.1 Discharge performance in accordance with ES/IEC 60086-2 • 5.2.2 Discharge service out put

ES IEC 60227-1Polyvinyl chloride insulated cables of rated voltage up to and including 450/750v

24 29

• 5.1.3 Conductor’s construction in accordance with ES/IEC 60228 , · 5.1.4 Conductor’s electrical resistance in accordance with ES/IEC 60228 , • ,5.2.3 insulation thickness in accordance with particular specifications of ES/IEC 602273 and ES/IEC 60227-4 • 5.5.3 Sheath thickness in accordance with particular specifications of ES/IEC 60227-4 • 5.6.1 Voltage withstand of completed cable at 2000v and voltage withstand of cores at 1500v

ES IEC 60227-3Polyvinyl chloride sheathed insulated cables for fixed wiring of rated voltage up to and including 450/750v

23 26

• 2.3.1 , 3.3.1 , 4.3.1 , 5.3.1 , 6.3.1, 7.3.1 Conductor’s construction and conductor’s electrical resistance in accordance with ES/IEC 60228, • 2.3.2 , 3.3.2 , 4.3.2 , 5.3.2 , 6.3.2 , 7.3.2 Insulation thickness in accordance with table 1.column 3 • 2.4 ,3 .4 , 4.4 , 5.4 , 6.4 , 7.4 Voltage withstand of completed cable at 2000v and voltage withstand of cores at 1500v table 24,6,8,10,12

ES IEC 60227-4Polyvinyl chloride sheathed insulated cables for fixed wiring of rated voltage up to and including 450/750v

14 12

· 2.3.1 Conductor’s construction and conductor’s electrical resistance in accordance with ES/IEC 60228 , • 2.3.2 Insulation thickness in accordance with table 1.column3 • 2.3.5 Sheath thickness in accordance with particular specifications of table 1,column5 • 2.4 Voltage withstand of completed cable at 2000v and voltage withstand of cores at 1500v as per table 2



ES IEC 60227-5Polyvinyl chloride flexible insulated cables for fixed wiring of rated voltage up to and including 450/750v

26 29

• 2.3.1 Conductor’s resistance maximum in accordance with table1,column 5 • 2.3.2 Insulation thickness in accordance with table 1.column 4 • 2.3.4 Overall dimension in accordance with table 1.column 2 and 3 • 5.3.4 Sheath thickness in accordance with table 7,column 3 • 5.4Voltage withstand test of completed cable at 2000v and voltage withstand of cores at 1500v as per table6,8,10,12,14

ES IEC 60227-6Polyvinyl chloride insulated lift cables and cables for flexible connections of rated voltage up to and including 450/750v

21 26

• 3.3.1 Conductor’s construction and conductor’s electrical resistance in accordance with ES/IEC 60228 , • 3.3.2 Insulation thickness in accordance with table 4.column 2 3.3.4 Sheath thickness in accordance with table 5, column 3 • 3.4 Voltage withstand of completed cable at 2000v for U0/U • Voltage withstand of completed cable at 2500v for u0/u 450/7500v • Voltage withstand of core at 1500v for U0/U 300/500v • Voltage withstand of core at 2500v for U0/U 450/700v as per table 6 and 11

ES IEC 60227-7Polyvinyl chloride insulated Cables of rated Voltages up to and including 450/750 V - Part 7: Flexible Cables Screened and Unscreened with two or more Conductors

14 12

• 2.3.1 Conductor’s construction and conductor’s electrical resistance in accordance with ES/IEC 60228 , • 2.3.2 Insulation thickness in accordance with table 1 or 2.column 2 • 2.3.6 Sheath thickness in accordance with clause 2.3.6 • 2.4 Voltage withstand of completed cable at 2000v for U0/U 300/500v • Voltage withstand of completed cable at 2500v for U0/U 450/7500v • Voltage withstand of core at 1500v for U0/U 300/500v • Voltage withstand of core at 2500v for U0/U

ES IEC 60432-1 Incandescent lamps safety specifications 47 72

• 2.2.1 Mandatory markings • 2.3 Protection against accidental contact in screw lamp holders • 2.4.1 Lamp cup temperature rise • 2.5.2 Unused lamp resistance to torque • 2.10 Interchangeability

ES IEC 60598-1 Luminaries 193 214

• 4.1.2 Battery dimensions in accordance with ES/IEC 60086-2 of clause 7 • 4.16.1 Markings • 4.2.1 Discharge performance in accordance with ES/IEC 60086-2 • 5.2.2 Discharge service output

ES IEC 60968 Self-ballasted lamps for general lighting services 17 18

• 1 Marking • 5.1.5.3 Interchangeability • 6 Protection against electric shock • 8 Mechanical strength • 9 Cap temperature rise



ES IEC 60969Self-ballasted lamps for general lighting services performance requirements

11 9

• 6 Lamp wattage • 7 Luminous flux • 8 Colour • 9 Lumen maintenance • 10 Life

ES IEC 61195 Double –capped florescent lamps safety specifications 25 29

• 2.2 Marking • 2.3.1.1a Mechanical requirements for caps • 2.3.2.1dimension for caps • 2.4 Insulation resistance • 2.5.2 Electrical strength • 2.9 Lamp cap temperature rise • 2.1.1 lamp cap temperature rise

6 ES B.H0 001:1990 ES 359:2006 General standard for the labeling of prepackaged foods 5 3 Clause 4.5 All Mandatory Labeling

ICS 59.080.20 COTTON FIBER AND COTTON YARN

7 ES I.G1. 001:1990 ES 125:2001 Yarns-general requirements 12 9

Clause 5 - Quality Clause 9 - Marking Clause 10 - Designation

ES I.H0. 001:1990 ES 144:2001Cotton sewing threads-general requirements for cotton sewing threads

8 6

Clause 6 - Special requirements Clause 8 - Packing Clause 9 - Marking

ES I.B1. 001:1990 ES 147:2006 Cotton fibers-general requirements 5 3

Clause 4 -General Requirements Clause 5 - Dimensions Clause 6 -Quality

ICS 55.020. LABEING FOR PREPACKED PRODUCTS



8 ES B.J6.008: 1990 ES 39:2001 Raw hides and skins-grading of sheep & goat skins by appearance, mass and size 5 3

Clause 4 - Grading Clause 5 - Verification

8 ES B.J6.007: 1990 ES 1199:2000Raw hides and skins- grading of raw cattle hides &calfskin's byappearance and mass

6 3

Clause 4 -Classifcation Clause 5 - Grading Clause 8 - Labelling and Marking

9 ES D.N4. 001:1990 ES 1181:2008Leather - Wet-blue chrome tanned sheep and calfskins, and goatskins –Specification

4 2 Clause 4 - Requirements Clause 7 - Labelling and Marking

ES D.N4. 002:1990 ES 1182:2008Leather - Wet-blue chrome tanned sheep and calfskins, and goatskins - Specification

6 3

Clause 5 - Grading Clause 6 - Requirements Clause 9 - Labelling and Marking

ES D.N4. 003:1990 ES 1183:2008 Leather - Grading of chrome crust suede’s from goatskins 6 3 Clause 5 - requirements Clause 7 - Grading - Finishing Clause 8 - Packing

ES D.N7. 007:1990 ES 1185:2008 Leather - Lining leather – Specification 5 3

Clause 6 - Requirements Clause 7 - Grading Clause 8 - Finishing C lause 11 - Labelling and Marking

ICS 59.140.30 LEATHER

ICS 59.140.20 RAW SKIN,HIDES AND PELTES



ES D.N4. 005:1990 ES 1186:2008 Leather - Sole leather - Specification 4 2

Clause 4 - Requirements Clause 5 - Grading of Sole Lather Clause 7 - Packaging C lause 8 - Labelling and Marking

10

ES D.B1 001:1990 ES 262:2008 Fertilizers-ammonium sulphate –specification 3 2

Clause 4 .3 - Chemical Requirements Clause 6 - Packaging C lause 7 - Labelling and Marking

ES D.B1 002:1990 ES 263:2008 Fertilizers-ammonium sulp hate nitrate-specification 3 2

Clause 4 .3 - Chemical Requirements Clause 6 - Packaging C lause 7 - Labelling and Marking

ES D.B1 003:1990 ES 264:2008 Fertilizers-urea-specification 3 2

Clause 5.1 - General Clause 5.2 - Particle size C lause 5.3 - Chemical Requirements Clause 7 - Packaging C lause 8 - Labelling and Marking

ES D.B1 004:1990 ES 265:2008 Fertilizers-single superphosphate-specification 4 2

Clause 5 - Partcle size - Chemical Requirements, Clause 5.2 - Particle size Clause 7 - Packaging C lause 8 - Labelling and Marking

ICS 65.080 FERTILIZER



ES D.B1 005:1990 ES 266:2008 Fertilizers-triple superphosphate-specification 3 2

Clause 4 General - Partcle size - Chemical Requirements, Clause 6 - Packaging C lause 7 - Labelling and Marking

ES D.B1 006:1990 ES 267:2008 Fertilizers-potassium chloride-specification 3 2


ES D.B1 007:1990 ES 268:2008 Fertilizers-potassium sulp hate-specification 3 2


ES D.B1 008:1990 ES 269:2008 Fertilizers-diammonium phosphate-specification 4 2

Clause 5 General Partcle size , - Chemical Requirements, Clause 7 - Packaging C lause 8 - Labelling and Marking

ES D.B1 009:1990 ES 270:2008 Fertilizers-ammonium phosphate sulp hate-specification 4 2




ES D.B1 010:1990 ES 271:2008 Fertilizers-compound fertilizers-specification 3 2


ES D.B1 011:1990 ES 272:2008 Fertilizers-bone-meal, raw-specification 10 7


11 ES B.B1 104:19 ES 16:2001 Pulses-grading of beans 6 3

Clause 5.2 - Grades Clause 5.3 - Pesticide residues Clause 8 - Paking Clause 9 - Labeling and MarkingClause 5.2 - Grades Clause 5.3 - Pesticide residues Clause 7 - Paking Clause 8 - Labeling and Marking

ES B.B1 105:1990 ES 17:2001 Pulses-grading of lentils 4

ICS 67.060 CEREALS AND PULSES

2



ES B.B1 107:1990 ES 19:2001 Pulses-grading of dry peas 3 2

Clause 4.2 - Grades Clause 4.3 - Pesticide residues Clause 6 - Paking Clause 7 - Labeling and Marking

12 ES B. B2.601 ES 340:2005 Banana – Specification 2 1

Clause 8.2 - Packaging and labeling Clause 9 - Contaminats Clause - Pesticide residues Clause 11.2 - Microbiological requirements

ES B. B2.602 ES 341:2005 Pineapples Specification 2 1

Clause 8 - Packaging Clause 8.3 - labeling Clause 9 - Contaminats Clause 10 - Pesticide residues Clause 11 - Hygineic - Microbiological requirement

ES B.B2.700 ES 344:2005 Table Grapes Specification 8 6

Clause 6 - Packaging Clause 7 - labeling Clause 8 - Contaminats Clause 9 - Pesticide residues Clause 10 - Microbiological requirement

ICS 67.080.01 FRUITS,VEGETABLE AND DRIVED PRODUCTS



ES B.B6.002 ES 347:2005 Carrots Specification 7 6

Clause 8 - Packaging and labeling Clause 9 - Contaminats Clause 10 - Pesticide residues Clause 11 - Microbiological requirements

ES B.B6.003 ES 348:2001 Potatoes Specification 2 1 Clause 7 - Packaging

ES B.B6.100 ES 350:2005 Lettuce Specification

5 3

Clause 8 .2 - Packaging Clause 9 -labeling Clause 10 - Contaminats Clause 11- Pesticide residues Clause 11 - Microbiological requirements

ES B.B6.200 ES 351:2005 Tomatoes Specification 7 6

Clause9 - Packaging Clause 10 -labeling Clause 11 - Contaminats Clause 12- Pesticide residues Clause 13.2 - Microbiological requirements

ES B. B6.300 ES 353:2005 Green Beans Specification 5 3

Clause 8 .2 - Packaging Clause 9 -labeling Clause 10 - Contaminats Clause 11- Pesticide residues Clause 12.3 - Microbiological requirements

ES B.B6.301 ES 354:2005 Green Peas Specification 6 3

Clause 8 - Packaging Clause 8.2 - labeling Clause 9 - Contaminats Clause 10 - Pesticide residues Clause 12.2 - Hygineic - Microbiological requirement

ES B.H5 001:1990 ES 360:2006Canned fruits and vegetables-preserved by heat processing-general requirements

5 2

Clause 9 - Microbiological requirement Clause 11 - Filling Clause 13 - Refract metric value Clause15 - Metals Clause 18 - Labeling



ES B. B2.001 ES 375: 2005 Apples - Specification 6 3


ES B.B2.100 ES 376:2005 Apricots – Specification 6 3


ES B.B2.101 ES 377:2005 Peaches – Specification

5 3

Clause 8 - Packaging Clause 8.3 - labeling Clause 9 - Contaminats Clause 10 - Pesticide residues Clause 11 - Hygineic

ES B.B2.201 ES 378:2001 Grape Fruit Specification 2 1 Clause 4 - Pesticide residues Clause 8 - Packaging

ES B.B2.200 ES 379:2001 Orange Specification 2 1 Clause 4 - Pesticide residues Clause 8 - Packaging

ES B.B2.202 ES 380:2001 Mandarin & Tangerine Specification 2 1 Clause 4 - Pesticide residues Clause 8 - Packaging

ES B.B2.203 ES 381:2001Lemon Specification 2 1 Clause 4 - Pesticide residues

Clause 8 - Packaging

ES B.B2.204 ES 382:2001 Lime Specification 2 1 Clause 4 - Pesticide residues Clause 8 - Packaging

ES B.B2.606 ES 383:2005 Straw berries Specification 6 3

Clause 9.2 - Packaging Clause 9- labeling Clause 10 - Contaminats Clause 11 - Pesticide residues

ES B.B6.008 ES 384:2005 Onion Specification 6 3

Clause 8 - Packaging Clause 8.2 - labeling Clause 9 - Contaminats Clause 11 - Pesticide residues Clause 12.2 - Microbiological requirements



ES B.B6.009 ES 385:2005 Leeks Specification 4 2

Clause - Packaging Clause - labeling Clause - Contaminats Clause - Pesticide residues Clause - Microbiological requirements

ES B.B6.010 ES 386:2005 Garlic Specification 6 3

Clause 8.2 - Packaging Clause 8.4 - labeling Clause 9 - Contaminats Clause 10 - Pesticide residues Clause 11.2 - Microbiological requirements

ES B.B6.101 ES 387:2005 Asparagus Specification 7 6

Clause 9 .2 - Packaging Clause 9.3 - labeling Clause 10 - Contaminats Clause 11 - Pesticide residues Clause 12.2 - Microbiological requirements

ES B.B6.202 ES 388:1990 Cucumber Specification 6 3

Clause 8.2 - Packaging Clause 8.3 - labeling Clause 9 - Contaminats Clause 10 - Pesticide residues Clause 12.2 - Microbiological requirements

ES B.B6.203 ES 389:2005 Sweet Pepper 2 1

Clause 8 - Packaging Clause 9 - labeling Clause 10 - Contaminats Clause 11 - Pesticide residues Clause 12.2 - Microbiological requirements

13 ES B.N1. 002:1990 ES 590:2001 Green coffee beans-grading 7 6Clause 4 - Type Clause 5 - Quality assessment

14

ES B.M3 100:1990 ES 314:2001 Natural wines-specification 5 3

Clause 7 - Chemical requirement Clause 8 - Metal content Clause 9 - Anions Clause 16 - Lebling

ICS 67.160.10 ALCHOLIC BEVERAGE

ICS 67.140.20 COFFEE



ES B. M3 102:1990 ES 316:2006 Vermouth-specification 3 2

Clause 4 - General requirement Clause 8 - Chemical requirement Clause 12 - Lebling

ES B.M3. 001:1990 /ES 828:2002

ES 828:2012 Beer-specification 6 3

Clause 5 - Requirements Clause 9 - Pysical requirement Clause 10 - Chemical requirement Clause 11- Microbiological requirements 12 - Packing and Lebling

15 ES B.M4 001:1990 ES 240:2003 soft drinks- specification 18 18

Clause 6.1.3 - PH value Clause 6.2.4 - Contaminants Clause 6.25 - Brix value Arsenc mg/kg -lead - Cooper - Iron Clause 6.4 - Microbiological count

ES B.M4 002:1990 ES 241:2006 Fruit cordials, fruit squashes, fruit syrups Specification 4 2

Clause 5.2 - Appearance Clause 5.4 - total soluble solid content Clause 5.6 - Heavy metals Clause 5.7 - Microbiological count

ES B.M4 003:1990 ES 242:2006 Nectars of certain citrus fruits Specification 4 2Clause 5.4 - Soluble solids Clause 6 - Contaminants Clause 7.2 - Microbiological count

ES B.M4 004:1990 ES 243-1:2006 concentrated orange juice-specification 4 2

Clause 5 - Composition and quality factor Clause 6 - Contaminants Clause 7 - Microbiological count Clause 11 - Labelling

ICS 67.160.20 NON ALCHOLIC BEVERAGE



ES B.M4 005:1990 ES 244:2001 Natural citrus juice- (in sealed containers)-specification 4 2Clause 5 - Metal content Clause 7 - refractive index Clause 11 - Labelling

16 ES B.K1 001:1990 ES 42:2001 Edible oils-specification of additives and contaminants 2 1

Clause 2.1 - Color Clause 2.3 - Antioxidant Clause 2.5 - Antifoaming agent Clause 2.6 - Crystallization inhibitor

ES B.K1 002:1990 ES 43:2001 Edible rapeseed oil-specification 4 2

Clause 4.4 - (Physical and chemical requirements) - Acid value & acidity - Moisture & volatile matter - Insoluble Impurity - Peroxide value - Iron - Copper Clause 7 - Labelling

ES B.K1 003:1990 ES 44:2001 Edible maize oil-specification 4 2


ES B.K1 004:1990 ES 45:2001 Edible sesame seed oil-specification 4 2


ICS 67.200.10 ANIMAL AND VEGETABLE FATS AND OILS



ES B.K1. 005:1990 ES 46:2001 Edible groundnut oil-specification 4 2

Clause 4.4 - (Physical and chemical requirements) - Acid value & acidity - Moisture & volatile matter - Insoluble Inpurity - Peroxide value - Iron - Copper Clause 7 - Labelling

ES B.K1. 006:1990 ES 47:2001 Edible sunflower seed oil-specification 4 2


ES B.K1. 007:1990 ES 48:2001 Edible linseed oil-specification 3 2


ES B.K1. 008:1990 ES 49:2001 Edible cottonseed oil-specification 4 2




ES B.K1. 009:1990 ES 50:2001 Edible Niger seed oil-specification 4 2


ES B.K1. 010:1990 ES 51:2001 Edible oil-packing 2 1Clause 5 - Closures Clause 6 - Labelling

ES B.B1 001:1990 ES 10:2001 Oil seeds-specification 2 1Clause 3.2- Physical Clause 3.3 -Chemical Clause 3.3.2 -moisture

ES B.B1 001:1990 ES 11:2001 Oil seeds-methods of packing 1 1Clause 3 - Bags Clause 4 - Filling & weighing Clause 6 - Marking

18 ES B. Q2 001:1990 ES 298:2006 Edible salt-specification 5 3

Clause 4.2 - Essential composition Clause5.2 . Anticaking agents Clause 6 -Contaminants Clause 9 - Labeling

19 ES C.D4. 201:1990 ES 92: 2001 Matches - Specification 15 16Clause 4- Requirements Clause 5 - Labeling

20 ES D.E1. 001:1990 ES 184:2001 Laundry soap- Specification 6 3 Clause 5.8- Total fatty matter, free caustic alkali

ES D.E1. 016:1990 ES 185:2001 Carbonic soap- Specification 5 3Clause 4.8- Carbolic acid, free caustic alkali or free fatty acid content

ES D.E1. 010:1990 ES 186:2001 Toilet soap- Specification 5 3 Clause 4.8- Total fatty matter, free caustic alkali

ICS 71.100.30 MATCHES

ICS 67.200. 20 OIL SEEDS

ICS 67.220.20 EDIBLE SALT,FOOD ADDITVES

ICS 71.100.40 SURFACE ACTIVITY AGENT

17



ES D.E1. 051:1990 ES 187:2012Synthetic laundry detergents powders for household use -Specification

22 26Clause 4.- Requirements Clause 5. - Packing and Marking

21 ES C.D7.001:1990/ES 89:2001ES C.D7.026:1990 /ES 90:2001

ES G.B4. 051:1990 ES 93:2001Steel wire-cold drawn mild steel wire for the manufacture of nails 3 2

Clause 5.3 - mechanical Property

ES G.B4 060 ES 94 :2012 Barbed wire- Galvanized mild steelClause 3 - Dimensions Clause 4.1.3 -Zinc Coat

ES G.B4. 100:1990 ES 95:2001 Nails-steel wire nails 10 7Clause 5.2 - Band of shank Clause 5.3 - Eccentricity

ES ISO 6935-1:2009 Steel for the reinforcement of concrete-part 1: Plain Bars 16 16

• Clause 5 1. Dimensions, masses and tolerance • Clause 6 2. Chemical composition (cast analysis from molten batch at the production site )3. Product analysis (from the batch) • Clause 7.14. Tensile properties. • Clause 7.25. Bending properties.• Clause 86. Designation (local manufacturers should adhere to the designation )• Clause 97. Marking ( local manufacturers should adhere to local marking scheme)

8 6

Clause 3 - Dimension Clause 4.1 - General Requirement Clause 4.2 - Zinc Coating Clause 4.3 - Mass

ES 3742:2012 Galvanized Steel Sheets (Plain and Corrugated) - Specification

ICS 77.140 IRON AND STEEL PRODUCTS



ES ISO 6935-2:2009 Steel for the reinforcement of concrete-part 2: Ribbed Bars 26 29

· Clause 5 8. Dimension, mass and tolerance• Clause 79. Chemical composition (cast analysis from molten batch at the production site )10. Product analysis (from the batch ribbed bar)• Clause 8.111. Tensile properties.• Clause 8.212. Bending properties.• Clause 1013. Designation (local manufacturers should adhere to the designation )

ES ISO 9364:2011 Continuous hot-dip aluminum/zinc coatedsteel sheet of commercial, drawing and structural qualities

19 23 5.8 , 5, 4.1 and 5.3.1

22 ES D.H2.001:1990 ES 176:2006 Low density polyethyene film-general requirements 4 2

Clause 7.1 - Chemical requirements - Clause 7.2 Physical requirements

23ES 3605:2011

Specification for Corrugated fiber Board Boxes for Packaing Rose Flower

14 12From clause 4 to 11

24 ES C.D5. 003:1990 ES 166:2001 Hydrated lime-general requirements 3 2

Clause 7 -Quality - chemical requirements - Physical requirements

ICS 85.020. PAPER PRODUCTION PROCESSES

ICS 91.100 CONSTRUCTION MATERIALS

ICS 83.140.10 RUBBER & PIASTICS PRODUCTS



ES C.D5. 002:1990 ES 167:2001 Quicklime-general requirements 3 2

Clause 7.1 - Chemical requirements - Clause 7.2 - Physical requirements

ES C .D5.201:1990 Portland cement-general requirementsES C.D5. 202:1990 Portland- pozzolana cement-general requirements 26 29

ES C.D3.201:1990 ES 81:2001 Normal Concrete Aggregates 11 9

Clause 4.1 General requirement Clause 4.2 - Deleterious substances Clause 4.3- Soundness Clause 5.4 - Resistance to abrasion

ES C.D3.301:1990 ES 82:2001 Hollow Concrete Blocks and Beamtiles 4 2

Clause 5 - Dimensions Clause 7.1- General requirement Clause 7.2 - Planeness Clause 7.3 - Compressive Strength

ES C.D3.326:1990 ES 83:2001 Concrete Sewer Pipes 6 3

Clause 3 - Dimensions Clause 4.1 - Diameter Clause 4.2- Wall Thickness Clause 7. - All Quality requirements

ES C.D4.001:1990 ES 86:2001 Clay brick-solid clay bricks 6 3Clause 4 - Dimension, Clause 5 - Quality

ES C.D4.026:1990 ES 87:2001 Clay brick-hollow clay bricks and beam tiles 5 3

Clause 3 Types Clause 4 - Dimension Clause 5 - Quality requirements

ES 1177-1:2005 Clause 7 Mechanical, physical, chemical and durability requirements

Ethiopian 1

Documents

Transcript of Ethiopian 1