Equipment List for Computer Deptt

S.No Name of the Equipment Total Quantity Required

Make and Model Rates to be quoted

1

Computer System (I7 Processor) Intel(R) Core(TM) i7-2600(3.40 Ghz, 8 MB cache ,4 cores) processor or latest , 16 GB 1333 MHz DDR3 SDRAM , 1 T B SATA (7200 rpm) Hard Disk , 16 X SATA Super Multi DVD Writer , Network interface :wireless NIC 802.11b/g/n mini card, 19” TFT Monitor, USB Mouse- Key Board, Windows ®7 Professional 64 Operating system Genuine(preload) SSF(Small form Factor) HP/HCL/ACER/Lenovo/Dell with UPS 1 KVA

10

2 Oracle (Latest Version)

01

3 Dot Net (latest version) 01

4 AntiVirus(multiuser) 01 (40 users)

5 UPS 5 KVA online with 1hr backup 2

6

Overhead projector Brightness (Lumens) : 1800 ANSI Audible Noise: 43.0 dB Size (cm) (HxWxD) : 7 x 29 x 23 Display: Native: 800x600 Pixels Maximum: 1024x768 Pixels Digital Zoom: Yes Digital Keystone: Vertical Lens Shift: Vertical Warranty: 2 Years Life: 2000 hours Speakers: 1.0 W Mono Max Power: 240W Voltage: 100V - 240V

01

7 Keyboard

10

8 Mouse

20

9 External hard disk 500GB

3

10 RAM

5

11 Microprocessor 8085 kit with LCD

10

12 Microprocessor 8086 kit with LCD 10

EQUIPMENT LIST FOR COMPUTER CENTRE

S.No Name of Equipment Total

Quantity

Make and

Made

Rate to be

quoted

1.

Computers with UPS

Computer System (I7 Processor) Intel(R) Core(TM) i7-

2600(3.40 Ghz, 8 MB cache ,4 cores) processor or latest , 16

GB 1333 MHz DDR3 SDRAM , 1 T B SATA (7200 rpm)

Hard Disk , 16 X SATA Super Multi DVD Writer ,

Network interface :wireless NIC 802.11b/g/n mini card, 19”

TFT Monitor, USB Mouse- Key Board, Windows ®7

Professional 64 Operating system Genuine(preload)

SSF(Small form Factor) HP/HCL/ACER/Lenovo/Dell with

UPS 1 KVA

30

2 Projector LED Digital Multimedia Projector

Brightness (Lumens) : 1800 ANSI

Audible Noise: 43.0 dB

Size (cm) (HxWxD) :

7 x 29 x 23

Display:

Native: 800x600 Pixels

Maximum: 1024x768 Pixels

Digital Zoom: Yes

Digital Keystone: Vertical

Lens Shift: Vertical

Warranty: 2 Years

Life: 2000 hours

Speakers: 1.0 W Mono

Max Power: 240W

Voltage: 100V - 240V

1

3 Coloured LCD TV 48 inches smart tv 1

4 External Hard disks 500GB 5

5 Laser Printer B/W

Laser Printer:

Print speed:

Normal:Up to 40 ppm, Fisrt page out (ready) , Black:As fast

as 7.5 sec ,Print quality black (best): Up to 1200 x 1200 dpi

Print technology: Laser, Processor speed: 540 MHz

Display: 2.25-in LCD (text) , 4 line display , up to 18

characters per line , ePrint capability:

Connectivity, standard: 1 Hi-Speed USB 2.0 , 1 external

Host USB , 2 internal Accessory ports

Memory, standard: 128 MB, Memory, maximum: 640

MB

Paper handling input, standard: 100-sheet multipurpose

tray 1; one 500-sheet input tray 2; automatic duplex

printing , Paper handling output, standard: 250-sheet output

bin; 100-sheet rear output bin

Duplex printing: Automatic (standard)

2

INTRUMENTATION AND CONTROL

CONTROL LAB S.NO. Name of the equipment Total Qty.

Required

Make and

Model

Rate to be

quoted

1. TEMPERATURE CONTROL SYSTEM On/Off temperature Controller (indicator cum controller • Open loop response • Close loop response with (a) On-Off control for low and high hysteresis (b). Different values of Proportional gain factor. • Temperature controller with facilities for P,I and D • Three and half digit DVM for Temperature Measurement

2

2. D.C. MOTOR SPEED CONTROL SYSTEM DC Motor Speed control trainer kit

• Speed control of DC motor in open and close loops • DC motor should be low watt & volts (12V, 4Watt) permanent magnate type • Speed range 0-3000 RPM • Feed back by electronics techo-generator • Smooth eddy current (non-contact) break for loading • Four digit display for RPM counter and 3.1/2 digit DVM for signal measurements

2

3. Synchro Transmitter Receiver Pair

Features: The input angular displacement displayed

on anodized dial.

The output angular displacement displayed on anodized dial.

Two rotor terminals (r1 & r2) three stator terminals (s1, s2 and s3) are brought out on the front panel

2

4. Relay control trainer 2

5. D.C. MOTOR POSITION CONTROl SYSTEM • Provision for positive and negative techno-generator feedback • Calibrated dial for reference and output position • Serco-potentiometers with full 360 deg. Rotation • μp Based waveform capture and display card • Three and half digit DVM for signal measurement

2

6. PID Controller

(MICROPROCESSOR BASED)

The system should be based on CPU, 8055, 8155,

8279, & 6116 RAM, the unit should be with 16

diased git keyboard and 6 no. seven segment

displays.

PT 100 RTD with associated

instrumentation card.

12 bit ADC using IC 7109.

.The software supplied should facilitate

the experimentation in following modes:

Proportional controller.

Proportional + Integral controller.

Proportional + Derivative.

P + I + D controller.

2

7. Features and Specifications of Stepper Motor • Single stepping and free running modes of operation

with speed variation and direction reversal - internal TTL circuit.

• 360° motion Servo-Potentiometer position-pickup for

motor dynamics

• Operation through microprocessor kit – sample control

programs provided

• Stepper motor specification

Torque: 2.8 Kg-cm Step angle: 1.8° Power: 12V, 1A/phase

• 220V±10%, 50Hz mains operation

2

8. CASCADE CONTROL SYSTEM KIT

*Compact Ergonomic Design.

*User Friendly, Self Explanatory Systems.

* Leak proof Safety Measures, Sturdy Piping &

Robust Construction.

*Enhanced Electrical Safety Considerations.

* Training Manuals, mimic Charts for Operation

Ease.

* System Frame with Caster Wheel Arrangement

for ease in movement.

* M.S. powder coated cubical plant with standard

Instrument Mountings.

* Inbuilt Safety Measures to avoid improper usage.

* Computer Interface & SCADA software

connectivity for analysis of Cascade Control Loop

(Optional).

2

9. RATIO CONTROL SYSTEM 2

Specification

Sump tank:

Material: PVC foam sheet, 5 mm thick, Capacity: 30 liter,

Dimension: 1.5ft (L)x1ft (W)x1 ft (H).approx.

Piping:

1/2, Class B GI with 1/2 SS ball valves: 10 no.

Centrifugal Pump

1/4HP, 230V AC supply

Flow meter:

2 no. Turbine type/ wfm type, Range: 0-600

LPH / 0-1000 LPH, Output: 4-20 mAType: 3-wire

type, Supply: 24 V DC: 100 mA Mounting:

Horizontal

Flow Indicator

2no, 3.1/2 Digital Display, 230 VAC supply

Pneumatic control valve:

, Type: Two way Globe type with valve Positioner

(Air to Close) Cv: 5 US GPM, with diaphragm

actuator.Flange connection: PCD: 60 mm, ID: 16 mm, OD: 90 mm.

E/P Converter:

Input: 4-20 mA, Output: 3-15 psi

Air Pressure Regulator:

0-10 Kg/cm 2 with pressure gauge.

Power Supply:

24 V DC, 1 A, Size: 48mm×126mm×68mm.

Electronics PID Controller:

With Serial Interface (ASCII Protocol) RS 232

Cut Out Size; 92x92×144mm, Input: 4-20 mA,

Output: 4-20 mA,Display: Dual for PV & SP,

Bargraph display for Output & deviation, Hi-Low alarm annunciation.

SCADA Application Software

Ellipse SCADA S/W, Version: Ellipse view for

experimentation PID control setting (P, PI, PD

And PID mode), Auto/Manual Tunning of

PID,Data Storage, Off Line analysis, Online Data

Acquisition, Simulation and Printing Of data in

Graphical and tabular form. Interactive Graphical

User Interface (GUI

Electrical Control panel :

MS Powder coated panel with switches,

indicator,Test Points, controller on front facia, UK

2.5 Terminal connectors mounted on DIN rail

channel,

Air Compressor:

Tank capacity: 30 Liters, Discharge: 2 CFM

Motor: 1/2 H.P. 230 V AC Operated Working

Pressure: 3-4 Kg/cm2

Computer:

PC with colour monitor: 15” PC pentium dual

cure, with serial port, 160/300 GB HDD, 512MB /

1GB RAM

10. Split-range control system kit

2

TRANSDUCERS LAB (I&C) S.NO. Name of the equipment Total Qty.

Required

Make and

Made

Rate to be

quoted

1. Hygrometer Humidity Measurement And

Controller

specifications

Type TFH 610

Measuring range

humidity 0 to 100% rH

Measuring range

temperature 0 to 50°C

Accuracy humidity ± 2,5% rH (from 10

to 90%)

Accuracy temperature ±0.5%

Resolution humidity 0.1%

Resolution temperature 0.1%C

Operating temperature 0°C to +50°C

Storage temperature -25°C to +60°C

Protection class IP 40

Dimensions 115 x 54 x 22mm

2

Housing material ABS

Weight approx. 90 g

Display LCD

Sensor humidity capacitive

Sensor temperature thermistor

Probe position internal

Probe connection permanently attached

Measuring channels 2

Battery Lithium button cell

3.0 volt, 1000 mAh

Battery life up to 5 years

2. Load Cells Specifications:

Constructed from stainless steel, carbon

steel or aluminum

50 grams to 1.3 million kg/3 million pounds

(13,500 kN) miniatures

Accuracy to 0.03%

Dual bridge vibration, and fatigue rated

2

3. Pressure Measurement using Piezoelectric

Crystal

Should have a charge frequency response

capacity ranging from 20 Hz to 10 KHz. Should

have electromagnetic sensitivity of 0.0009

equiv.gm/gm and base strain sensitivity of 0.008

equiv.gm/micro strain. Piezoelectric force sensors

should display a 5-volt full display signal.

Piezoelectric force sensors should have an

operating temperature range from -50 to ? ºC and

should have sensitivity of approximately 105

pC/N. Piezoelectric pressure sensors should have

rise time less than 2.0 micro seconds. The

maximum pressure applied by piezoelectric

sensors can be 1000psi and the voltage

measurement range can be up to 5 volts.

2

4. Temperature Measurement

Thermocouple: Range 0 to 200 degree C.

Accuracy: +/- 1% of the range.

2

5. Thermistor: Only characteristics with two

ranges (0 to 2000 ohm & 0 to 20 K ohm)

selectable by switch.

2

6. RPM/Speed measurement (Photo-Electric

Sensor)

2

7. Vibration measurement (Strain Gauge sensor)

2

8. Experimental kit for measurement of Stress &

Strain using Strain Gauges

SSKJHDHESPECIFICATIONS

Steel bending bar: - cross-section: 20x6mm - lever arm: 285mm - distance between strain gauge and load: approx. 290mm Strain gauge: - k factor: 2.05 - resistance: 350 Ohm - temperature compensation - 2 supplementary resistors: 350 Ohm each - power supply Ue: 10V Analogue millivolt meter: +/- 10mV Set of weights: 1x5N, 4x10N, 1x hanger 5N

2

9. OPTO-ELECTRONIC TRAINER KIT The LDR and OPTO Isolator Training Kit with In-built

power supply, TT-LDR-OC

specifications: Buzzer provided for ON/OFF operation

Opto Isolator to explain the working & characteristics of

device

Test pins for monitoring at all stages

In-built Power Supply

Lux Meter

2

10. Tachometric feedback kit for control of speed

of motor along with motor

Tachometer Specifications R-1 Specifications

Size (H x W x D) 2.5" x 2.5" x 3.65," with a 2.25" Bezel

Weight - Instrument 7 0z.

Connections Connects to "P" leads through isolotars (no

magnetic pick-ups required).

Power Requirements

7.5 to 30 Volts, 1/10 Amp

Display

Viewable in direct sunlight, with dimmable 12

and 24 volt backlight control lines.

Accuracy

1/2%

Resolution

Stable, 10 RPM Resolution with quick response

to engine changes.

Intensity Control An intensity control line allows you to control the

Backlight intensity.

3 PHASE INDUCTION MOTOR

AC 3 induction motor. This operates on 415V

AC. This squirrel cage induction motor coupled

to a 2KW shunt generator.

Specifications:

* Volts: 415V - 3¢

* Power: 2.2KW

2

* Current : 4.8A

* RPM: 1440

* Frame: PM100

11. Torsion dynamometer kit for measurement of

Torque

specifications Range front cale: 10 mN

Range side scale: ±3 mN

Raw subdivision: 1 mN

Fine subdivision: 0,1 mN

Maximum lever load: 0,2 N

Scale diameter: 170 mm

Length of lever arm: 240 mm

Torsion spring dynamometer with two

replaceable,circular magnetic scales;mounted on

support D=10mm,L=45mm,adjustable setting for

correcting to zero,each scale with a string

guide,string for suspending objects with hook.

2

S.

No.

Name of the Equipment Total qty.

Required

Make and Made

Rate to be

quoted

12. ACCELEROMETER KIT FOR

MEASUREMENT OFACCELERATION

Sensitivity: 10.2 mV/m/s2 (100 mV/g) ±5% at 100 Hz Frequency Response: 50 Hz to 3 kHz ±0.5 dB 20 Hz to 10 kHz ±dB Mounted Resonate Frequency: 25 kHz Acceleration Range: 490 m/s2 (50g) peak Shock Limit: 49,000 m/s2 (5000 g) peak Cross Axis Sensitivity: <5% of axial sensitivity Power Requirements: -24 VDC Bias Voltage: -8.5 VDC Nominal Temperature Range: Accelerometer: -40°C to 325°C Cable: -50°C to 121°C Electronics: -40°C to 120°C Isolation: 500 Vrms, electronics to case Case Material: Stainless Steel Hazardous Area Certification: Pending Environmental Rating: NEMA 4X Accelerometer: IP67

2

13. PLC Programming Trainer

PLC Kit with starter control and star delta starter,

sequential switching of motor board, water level

control, fan control simulator, seven segment

display, lift control, pick and place control

System Specifications:

8 Digital input / 4 Digital outputs.

24VDC, 1.5A Power source.4”X2”X2”.

2

I/p- O/p LED indication on front panel.

PC interface facility. PC-PLC interfacing cable.

2080-USBADAPTER: USB Adapter Plug for

Micro810 12-pt only

2080-LCD: 1.5 LCD Display and Keypad, for

Micro810 Only

Necessary I/p-O/p simulating devices.

Ladder diagram programming on PC.

SCADA SOFTWARE connectivity for

PLC.(optional)

Electrical control panel for simulation of digital

inputs (for switches 8 no.& proximity sensors,

miniature level switch

Front panel for display of digital input /output

status: Lamps (8no.), LED INDICATORS (4n

PLC panel dimensions: 1.5Ft. X 1.5Ft. X 1.5Ft.

With visible transparent front facia.

High speed Frequency input.

Inductive/ proximity limit switches (digital

inputs), relay outputs (digital outputs)

Optical sensor

v Output compatibility to Solenoid valves,

Electric motors as actuating elements in

respective assorted modules.

V Water level tank with Miniature Level

Switches(2nos.) and solenoid drain valve(1no.)

14. Measurement of Blood pressure using analog and

Digital B.P. gauge

Xperia- N-900

Electronic B.P. Instrument

Automatic Inflation

Intelligent Auto Test

Jumbo LCD Display

120 Memories (In 4 Groups)

Irregular Heart Best Detection

Last 3 result Average

Low battery indicator

2

15. Rotameter / Venturimeter to measure flow 2

16. Glucometer kit to measure Blood Sugar

Specification

* Result Calibration: Plasma

: Capillary action, End-fill

* Primary Site: Fingertips

* Alternate Sites: Forearm & Palm

* Hematocrit Range: 30 – 55%

* Operating Temp Range: 5-45°C

* Battery: 3V Lithium (coin battery)

* Battery Life: 1,000 measurements

* Calibration Method: Code Chip

* Glucose Test Range: 20-600 mg/dL

* Strip Shelf Life: 24 months

* Open Vial Expiry: 3 months

* Correlation Coefficient: >0.98%

* Precision: <5%

* Memory Storage: 300 results with date and

time

* Test Averaging: 7, 14 and 30 day averaging

* Control Solution: 2 levels, 1 and 2

* Data Download to PC

* Data management softwar Housing material: : steel; plastic (gasket PTFE) Length : approx. 500 mm Weight : 6 to 14.5 kg

(depending on design)

2

Digital lab (I&C)

S.NO. Name of the equipment Total Qty. or

required

Make and

Made

Rate to be

quoted

1. Digital IC Trainer –I (Full System)

(gate’s, FF’S, counter’s)

DICDM/-100

5

2. Digital IC Trainer –II (Shift Register &

Counters)

DICDM/-100

5

3. Digital IC Trainer-III FOR RS,D,T,JK

Flip Flops,Master Slave JK flip flop

using gates

5

4. Half & Full Adder & Subtractor using

gates 5

5. 4-Bit Binary full Adder & Subtractor

using gates 5

Computer Lab (I &C)

Sno. Name of Equipments Total Qty.

or required

Make and

Made

Rate to be

quoted

1. Laptop i7 intel processor Ram 4 Gb , Hard

Disk 640 GB. 1 GB graphics ,..or higher

12

1

2. Computer Systems

Computer System (I7 Processor) Intel(R)

Core(TM) i7-2600(3.40 Ghz, 8 MB cache ,4

cores) processor or latest , 16 GB 1333 MHz

DDR3 SDRAM , 1 T B SATA (7200 rpm)

Hard Disk , 16 X SATA Super Multi DVD

Writer , Network interface :wireless NIC

802.11b/g/n mini card, 19” TFT Monitor,

USB Mouse- Key Board, Windows ®7

Professional 64 Operating system

Genuine(preload) SSF(Small form Factor)

HP/HCL/ACER/Lenovo/Dell with UPS 1

KVA

10

3. UPS 1 KVA

(on line single Phase KVA)

10

4. Printer colour Laser Multifunction Printer 1

6. RS, D, T & JK Flip flop 5

7. Master Slave JK Flip-Flop Using Gates 5

8. Experimental Board for Shift Register

– SISO, SIPO, PISO, PIPO 5

9. Experimental board for Universal Shift

Registers (74194) 5

10. Experimental Board for Tristate Buffer

& Bussing techniques 5

11. Experimental Board for 8-line to 1-line

Multiplexer & Demultiplexer 5

12. Experimental Board for verification of

8-Bit ADC (Successive Approx.

Method)

5

13. Experimental Board for verification of

4-Bit ADC (Counter Comparator

Method)

5

14. Experimental Board for verification of

8-Bit DAC (R-2R Network Method) 5

15. Experimental Board for verification of

4-Bit DAC (Binary Weighted Network

Method)

5

16. Bread Board Trainer 10

Total

All in one Functions: Print, Copy, Send-to-

email/network folder.

Print Speed: Normal for color/Black upto

31ppm.

First Page out (black) : 10.9 sec / (color) :

12.2 sec

Automatic Document feeder ADF, Automatic

two sided Printing/copying .

Scanner type : Flat bed, ADF

Scan Resolution optical : up to 600 dpi

Scan Size Flatbed/ADF: 8.5 X 14 in

File format support: PDF, JPEG, TIFF,

MTIFF

5 Printer mono laser

Print speed:

Normal:Up to 40 ppm, Fisrt page out (ready) ,

Black:As fast as 7.5 sec ,Print quality black

(best): Up to 1200 x 1200 dpi

Print technology: Laser, Processor speed: 540

MHz

Display: 2.25-in LCD (text) , 4 line display ,

up to 18 characters per line , ePrint capability:

Connectivity, standard: 1 Hi-Speed USB 2.0 ,

1 external Host USB , 2 internal Accessory

ports

Memory, standard: 128 MB, Memory,

maximum: 640 MB

Paper handling input, standard: 100-sheet

multipurpose tray 1; one 500-sheet input tray

2; automatic duplex printing , Paper

handling output, standard: 250-sheet output

bin; 100-sheet rear output bin

Duplex printing: Automatic (standard

3

6. Anti virus multiuser ( latest version)

1 ( 20 user)

7. Multimedia projector (LED) Brightness lumens: 1800 ANSI

Audible noise : 43.0db

Size (cm) (HxWxD): 7x29x23

Display Native: 800x600 pixels

Maximum: 1024x768

Digital Zoom: yes

Digital Keystone vertical

Lens shift : vertical

Warranty: 2 years

Life ; 2000 hrs

Speakers: 1.0 w mono

Max power; 240 W

Voltage 100v -240 v

1

8. Digital Camera 16 mega pixels 5Xzoom 1

EQUIPMENT LIST OF MECHANICAL

ENGINEERING DEPARTMENT

S.no Name of the Equipment Total quantity

required

Make and

Made

Rate to be

quoted

1 Multi cylinder Petrol Engine Test Rig for Morse

Test with complete Accessories and indicators

including rope type Dynamometer to measure

BHP

1

2 Separating and Throttling Calorimeter apparatus

for measuring Dryness Fraction of Steam

1

3 Vertical Steam Boiler of 400 Kg/hr Capacity Oil

Fired, coil type with all accessories and

Mountings with Water Preheater fitted with

2KW capacity Impulse Steam Turbine

1

4 Laptop (Dell/Toshiba i-7 Intel processor with

RAM 4 GB, HDD 640GB, 1GB Graphics Card

15" Monitor

1

5 LED Projector Latest Configuration 1

6 Scanner 1

7 Impact Testing Machine for Izod and Charpy

Test

1

8 Complete set of Pyrometer with sensors to

measure the Temperatore of 2000 deg Celsius

2

9 Complete set of Thermocouple with sensors and

allied accessories to measure the Temperatore

2

10 Computerised Spring Testing Machine of

Capacity 100 KGF with Digital Load Indicator,

Digital Length Indicator

1

11 Hydraulic Bench Alongwith Venturimeter,

Orificemeter, Bernoulli's Apparatus, Major and

Minor Pipe Friction Apparatus

1

12 IDEAS/CATIA/Pro-E/Unigraphics/ANSYS

software for designing

1

EQUIPMENT LIST FOR AUTOMOBILE DEPARTMENT

S.No Name of equipment with specification Total

quant

ity

Make and

Made

Rate to be

quoted

1. Two Post Lift

Asymmetric design, total width 3000mm post

height 1890mm, min height 105mm, motor 2.2

kw, 3 phase 440V, capacity 3.2 Ton

01 No

2. Engine (New) BS 3(2515 make) with special

tools for operating & software.

01 No

6 cylinder TCIC with Rotary Pump

3. Chassis New BS 3 (s518 make) with special

tools for operating & software

6 cylinder TCIC, with Rotary Pump, air

brake/clutch, pressure steering GB 60

01 No

4. Gear Box with special tools for operating

GB 72 (new Tata model)

01 No

5. Power steering (working model

01 No

6. Computer systems Computer System (I7 Processor) Intel(R) Core(TM) i7-

2600(3.40 Ghz, 8 MB cache ,4 cores) processor or latest ,

16 GB 1333 MHz DDR3 SDRAM , 1 T B SATA (7200

rpm) Hard Disk , 16 X SATA Super Multi DVD Writer ,

Network interface :wireless NIC 802.11b/g/n mini card,

19” TFT Monitor, USB Mouse- Key Board, Windows ®7

Professional 64 Operating system Genuine(preload)

SSF(Small form Factor) HP/HCL/ACER/Lenovo/Dell with

UPS 1 KVA

04 No

7. Engine decarbonizer 1 set

8. AC recycling machine

Optimal operating range 11 deg to 49 deg

1 No

9. Rim Straighter

Power 220V AC motor 2hp, 1440 rpm, dye

attachment for 4,5,6inch rims

1 No

10. MPFI Engine petrol with special tools for

operating

600 to 800 cc 7 sensors and interface software

1 no.

EQUIPMENT LIST OF CIVIL DEPT

S.No Name of Equipment Total

Quantity

Make and

Made

Rate to be

quoted

1 Concrete

Technology

Digital Balance 5,10,15 kg capacity sensitivity 1gm

3

2

Surveying Automatic Level. Specifications: Magnification 32x, Standard deviation per km (double run level)= 2.0mm Accessories: Stand: Aluminium (heavy duty)-1no Staff: Aluminium (4m folding)-1no

6

3

Surveying Electronic Theodolite (including all standard accessories) Specification: Telescope: Image erect, magnification 30x, effective aperture 45mm

6

4

resolving power 3’, field of view 1 30’ Minimum focusing distance = 1.5m Measurement = Minimum reading 1” Display : LCD screen, both sides Level: vertical till compensation range = 3’ with setting accuracy 1” Accessories: Diagonal eyepiece, adoptor, toolkit, battery holder, handlany case Almunium heavy duty stand.

Surveying Digital Theodolite: Specification: 2” angle accuracy, 30 x telescope, clear aperature 45mm two faced LCD display. Till compensation automatically, range o compensator + 3’ nickel hydrogen chargeable battery. Accessories: all standard accessories included complete with manual and training at staff.

3

CADD

CAM

Scanner/Photostat/Printer 1

CADD

CAM

UPS Online 5 KVA 2

6

7 CADD

CAM Servo Stabilizer 5 KVA 3 phase 5 kva un balanced type

2

EQUIPMENT LIST FOR TRAVEL AND TOURISM DEPARTMENT.

S.No Name of Equipment Qty. Make and

Made

Rate to be

quoted

1 Language software

1 Teacher + 30 students

Headphones

Facility to restrict students on using any USB storage drive.

Teacher can see the grades of all the students

Questiodevice

Questions can be created by groupwise /departmentwise

Facility to restrict students on using an USB

1

2 Computer System (I7 Processor) Intel(R)

Core(TM) i7-2600(3.40 Ghz, 8 MB cache ,4

cores) processor or latest , 16 GB 1333 MHz

DDR3 SDRAM , 1 T B SATA (7200 rpm)

Hard Disk , 16 X SATA Super Multi DVD

Writer , Network interface :wireless NIC

802.11b/g/n mini card, 19” TFT Monitor, USB

Mouse- Key Board, Windows ®7 Professional 64

Operating system Genuine(preload) SSF(Small

form Factor) HP/HCL/ACER/Lenovo/Dell with

UPS 1 KVA

5

3 Bio Metric and security system

With CCTV camera

1

EQUIPMENT LIST FOR WORKSHOP

S.No Name of equipment with specification Qty Make and

Made Rate to be quoted

1. CNC trainer milling machine with industrial controller Fanuc/Siemens(HMT/BOTLIBAI/MTAB Table size- 480 X 180 mm Travel X Axis- 250 mm Travel Y Axis -150 mm Head Travel Z Axis -200 mm Automatic tool changer 6nos Tool packages for machine to be provided

1 No

2. CNC trainer lathe with industrial controller Fanuc/ Siemens(HMT/BOTLIBAI/MTAB) Distance bet centre-280-325 Swing Over Bed -275mm Chuck Size -100mm Z axis travel -180-210 mm X axis travel -80-110 mm No. of stations-8 Tool packages for machine to be provided Spindle Motor -3.7kws. Industrial Controller-Original Fanuc/Siemens

1 No

3. Gas welding with acetylene gas torch, blow pipe 20 meter, gas torch, oxygen regulator, oxygen cylinder

1 No

4. Compressor 500PSI tank capacity double acting with 3-phase with motor of 10hp (elgi, ingersoll rand)

1 No

5. Drilling Machine with automatic tool changer with 3 phase with motor of 3hp and the no. of tools 12, ranging from 6mm to 40mm (HMT, Kirloskar, BOSCH)

1 No

6. Multiple shearing machine (angle cutter, round and square bar cutter and flat cutter) cutting thickness4-12mm ,width-1250mm Motor-5h.p.

1 No

7. Hydraulic Power hacksaw with automatic lifting and lowering arrangement. Capacity of round-200mm Capacity of square-150mm . Size of blade-350-450mmMotor -1H.p.

1 No

8. Vertical Slotter machine bed size 2’X2’ and stroke length of 2’

1 No

9. E.D.M (Electro Discharge Machine) Work tank size (W x D x H): Approx.800 x 500 x 325 mm Work table dimensions: Approx. 550 x350mm.

Table Traverse (X, Y, Z): Approx.-300,200,200mm., Maximum job height : 275mm Feed Motor (for Z axis):

DC Servo Maximum Working current: 50 A ±5 A. Dielectric capacity: approx. 400 litres.Pulse Generator: 35amps Type : MOSFET Controller.One suitable Voltage Stabiliser

1 no.

10. Universal Milling Machine: Geared head universal

milling machine having three outos feed. 1. Surface of table – 1220 x 280mm. 2. No. of T-slots 3x15 3. Longitudinal power & by hand- 660mm 4. Cross power & by hand 660mm. 5. Vertical power & by hand 406mm 6. Length of Arbor 635mm 7. No. of spindle speed 6 8. Head motor 2hp 9. Feed motor -2hp 10. Coolant motor-1/10hp App. Weight-2400kgs Dividing head and slotting attachment

1 no.