Teuber t Maschinenbau GmbH | technolog y for par ticle foams | EPS | EPE | EPP

EPPMolding Program

EPP-Unimat The well proven standard machineThe EPP-Unimat is our well proven standard machine with a solid steel construction with O-design and tie bars. The “work horse” for an economic and energy-efficient pro-duction of EPP parts.

The EPP-Unimat belongs to our EPP basic series.

• Machine steel construction (high rider)

• Available alternatively with integrated steam chest or as table press

• Solid, simply constructed

• Flexible and individually configurable with optional packages

• Energy-efficient

• Frequency-controlled hydraulic system

• Safety work platforms available

H I G H L I G H TS

Teubert Molding Equipment (TVZ)The topsellerThe TVZ machine concept has been developed to meet customer requirements for an user-friendly, highly precise and energy-efficient machine. This machine type guaran-tees the production of EPP parts with highest dimensional accuracy.Teubert Molding Equipment (TVZ) belongs to our EPP efficiency series.

H I G H L I G H TS• User-friendly and easy-to-maintain low rider version

• Table press with media transfer system

• The open machine concept • allows an easy integration of additional systems, for instance linear

handling equipment, robots, thermoforming machine, etc.• realizes extremely wide openings between the press tables• allows shortest mold changes and thus short downtimes

• Modern energy-efficient steaming system with pre-pressure regulation, di-rect-steaming as well as upper and lower steaming (energy efficiency packa-ge (low energy (LE))

• The linear guidance and the symmetrical high pressure closing of the ma-chine concept guarantee the production of extremely precise EPP parts with highest accuracy and reproducibility in the product quality

• The machine concept ensures optimum cycle times and shortest setup time

• The machine concept gives you the maximum possible flexibility for molding

The all-rounder for insert molding technique in the EPP sectorThe TransTec is an energy-efficient, tiebarless two-axis machine with vertical mold split lines. During the production process molding and handling run simultaneously.

The TransTec belongs to our EPP shuttle series.

• Versions with single and double shuttle are available

• Table press with media transfer system

• Table press for installing monoblock molds

• The machine concepts enables the integration of robots

• Manual insert and take-out possible without any risks

• Different insert molding techniques, for instance manual handling or with robots etc. (have no input to the cycle time - cycle times are fix)

• Modern steaming system with pre-pressure regulation, direct-steaming as

well as upper and lower steaming (energy efficiency package)

• Different drive concepts

TransTec

H I G H L I G H TS

Teubert sun visor machine (TSM)Our EPP half clam sun visor specialist

The machine design with 4 tie bars (O-design) and tables with an extreme low deflection of the machine tables guarantee very high precision.

The TSM belongs to our EPP special series.

H I G H L I G H TS

• Table press with media transfer system

• Ejection on conveyor belt or take-out with robot possible

• Special steaming system for sun visor production

• Lowest possible deflection of the machine tables

• Steam chest systems especially designed for half clam sun visors

• The integration of additional systems, for instance linear handling equip-

ment, robots, etc. for a fully automatic production is possible

Teubert full sun visor press (TVP)The EPP full sun visor specialist

The space-saving Teubert full sun visor press (TVP) is used to produce EPP full sun vi-sors. It produces up to 2 full sun visors per cycle.

The TVP belongs to our EPP special series.

• Table press with media transfer system with tipping function for process relia-

bility

• Machine technique to use molds without steam nozzles

• Direct and indirect steaming specialized for the production of full sun visors

• Steam chest systems with horizontal division, especially designed for full sun

visors

• Manual insert and take-out possible without any risks

H I G H L I G H TS

EPP Basic series

EPP Efficiency series

EPP Shuttle series

Energy efficiency package

Press table (for connecting steam chests or monobloc molds) Opt. ✓ ✓

Thermal isolation of press tables Opt. ✓ ✓

Upper steam supply ✓ ✓ ✓

Lower steam supply Opt. ✓ Opt.

Direct steaming Opt. ✓ ✓

Pre-pressure steam regulation Opt. ✓ ✓

Hybrid machine movement - Opt. Opt.

Ergonomic package

Low rider version - ✓ ✓

High rider version ✓ Opt. -

Tiebarless (free access from opera-tor side to the molding area) - ✓ ✓

Automation package

2-axis linear handling Opt. Opt. Opt.

Robot handling Opt. Opt. Opt.

F E AT U R E S

Teubert Maschinenbau GmbHWaldshuter Strasse 1578176 Blumberg | Germany

Tel. +49 (0) 7702 / 4393 0 Fax. +49 (0) 7702 / 4393 50

info@teubert.de www.teubert.de