Endure CL Product Catalog · PDF fileAmong the many advantages of the ENDURE CL Internal Hex...

Product CatalogENDURE™ CLI N T E R N A L H E X I M P L A N T

OrdersandCustomerService:800-879-9799or580-223-4456 DomesticFax:800-986-9574or580-223-4561www.imtec.com Copyright2008 IMTEC,a3MCompany OrdersandCustomerService:800-879-9799or580-223-4456 DomesticFax:800-986-9574or580-223-4561www.imtec.com Copyright2008 IMTEC,a3MCompany

IMTEC is committed to the advancement of dental science and dental implant technology. The company, through ongoing research, has developed a wide range of dental products currently in use by clinicians throughout the world.

The IMTEC Hexed-Head dental implant system was first developed by Ronald A. Bulard, D.D.S. in 1986. IMTEC was incorporated by Dr. Bulard and E.S. Gillespie, D.D.S. in 1990. From its inception, the company’s implant system and related technologies have been developed based on simplicity and technical accuracy.

IMTEC has sponsored a host of clinical and university studies with protocols of selected studies having been reviewed and accepted by the American Dental Association (ADA). Additional studies are currently ongoing at major universities around the world.

The IMTEC SystemGreat care is taken in the selection of materials, production methods, sterilization and packaging of IMTEC dental implants and associated components. Strict inspection procedures have been established to ensure all IMTEC products are in compliance with an array of regulatory standards.

IMTEC’s products are manufactured under registered ISO 9001 and ISO 13485 quality systems. In addition, by meeting the stringent European standard (EN46001) for medical devices, IMTEC has been authorized to utilize the CE mark. This demonstrates the company’s manufacturing excellence and concerns for patient safety. By following the FDA’s Good Manufacturing Practices (GMP) and by adhering to additional rigorous medical device regulations, IMTEC dental products have been accepted by the Food and Drug Administration (FDA) to be marketed and sold in the United States.

Unless otherwise noted, all implants and components are precision machined with Computer Numerical Controlled (CNC) machines. Critical dimensions are held within +/-.0005” (5 µ ) accuracy. IMTEC dental implants are produced from surgical grade titanium alloy.

Quality ControlQuality Assurance at IMTEC meets the rigid specifications of the medical device regulations. Many of the products and components are subject to 100% inspection during various stages of production.

PackagingIMTEC’s dental implants and sterile components utilize packaging configurations that have been validated to provide clean, sterile barriers for a duration of at least five years. Each sterile device includes a removable patient chart label for future referencing and simplified record keeping. Dental instrumentation and components are provided non-sterile.

CommitmentOur commitment at IMTEC is to provide the dental profession with state of the art, cost effective dental implants and associated products, coupled with competent, reliable customer service. We stand ready to serve you at all times. Please visit our user friendly website at www.imtec.com, or call our toll free number, 800-879-9799 today.

IMTEC Limited WarrantyIMTEC warrants to the dental professional who purchases its products that all reasonable care has been taken in the choice of materials, method of manufacture, coating and packaging. IMTEC shall not be liable for any incidental or consequential loss, damage or expense, directly or indirectly arising from the use of its products. The foregoing warranty, as conditioned and limited, is in lieu of and excludes all other warranties, whether expressed or implied, including but not limited to any implied warranties of merchantability or fitness-for-use, and of any other obligation on the part of the seller. IMTEC neither assumes, nor authorizes any other person to assume for it any additional liability or responsibility in connection with its products. No agent, employee or representative of IMTEC has any authority to bind IMTEC to any affirmation, representation or warranty concerning its products and any such representation or warranty shall not be enforceable by the buyer. Liability under this warranty is limited to replacement of any product which shall appear to IMTEC to have been defective in materials, manufacture or packaging. Damage to any IMTEC product through misuse, neglect, accident or failure to follow recommended procedures or instructions for use or by modification by the buyer or user voids any IMTEC warranty. Product replacement under IMTEC’s warranty shall be effected by promptly contacting IMTEC at the phone numbers provided. Nothing in IMTEC’s warranty shall be construed to extend the rights or remedies of a patient into whom an IMTEC product is implanted. CAUTION: United States laws restrict the sale of any IMTEC product or device to licensed physicians, dentists or dental specialists. Use by any other person is strictly prohibited.

Shipping PolicyShipments are made freight collect or prepaid by IMTEC with the shipping costs added to the customer’s invoice. Priority shipping options are available at the customer’s expense. Clinicians are cautioned not to accept packages with exterior damage. If there are shortages or questions, please notify the company within ten days.

Return PolicyA return goods authorization (RGA) number is mandatory when returning any product to IMTEC. An RGA number can be obtained by calling your IMTEC customer complaint coordinator within 30 days of the invoice date. No cash refunds, only store credit. A 15% restocking fee will be applied to all returned items.

Note: Any package returned without a valid RGA number clearly printed on the outside of the package will be refused and returned at the physician’s expense. Any opened product will not be accepted.

IMTEC, a 3M Company

OrdersandCustomerService:800-879-9799or580-223-4456 DomesticFax:800-986-9574or580-223-4561www.imtec.com Copyright2008 IMTEC,a3MCompany OrdersandCustomerService:800-879-9799or580-223-4456 DomesticFax:800-986-9574or580-223-4561www.imtec.com Copyright2008 IMTEC,a3MCompany

ContentsIMTEC’s Simple Approach to Dental Implants 2

ENDURE™ CL Implants 4

Cover Screw & Healing Abutments 4

Impression Posts 5

Lab Analogs 6

Prosthetic Components 6

Titanium Abutments 6

Castable Abutments 7

Titanium Angled Abutments 7

Titanium DIE Abutment 7

Titanium O-Ball Abutments 8

Zest Locator Abutments & Attachments 9

Bar Overdenture Systems 10

Bar Clip System 10

Hader Bar System 10

Castable O-Ball Abutments for use with Castable Bars 11

ENDURE™ Surgical Kit and Components 12

ENDURE™ Surgical Instruments 13

Drills & Bone Taps 13

Surgical Facilitators & Tissue Punches 13

ENDURE™ Implant & Prosthetic Drivers 14

Implant Drivers 14

Prosthetic Drivers 14

Ratchet Wrench Systems 15

Torque Wrench Systems 15

Specialty Abutment/Post Drivers 15

IMTEC OSSEO+ Cortical Demineralized Bone™ 16

Surgical Protocol 18

Implant Site Preparation 18

Implant Insertion 18

Healing Stage 20

Restorative Protocol 21

Implant Motor, Handpieces & Accessories 22

ENDURE™ Flowchart 23

Notes 24

Technical/Clinical Assistance 25

2

OrdersandCustomerService:800-879-9799or580-223-4456 DomesticFax:800-986-9574or580-223-4561www.imtec.com Copyright2008 IMTEC,a3MCompany

ENDURE CL Implants have a proprietary, enhanced surface treatment.

IMTEC’s Simple Approach to Dental Implants

Triple Micro ThreadingThe micro threads inhibit soft

tissue migration and preserve

cortical bone at the crestal ridge

by reducing bone stress and axial

stiffness. The 1mm polished collar

allows the surgeon the option of

determining the collar position when

inserting the implant.

Enhanced Surface TreatmentENDURE’s enhanced surface

treatment increases surface area

and aids in osseointegration.

Serialized ImplantsEach implant is serialized

for confidential tracking and

unparalleled quality control.

Unique Triple Micro Threading

Each ENDURE CL Implant is serialized.

IMTEC, a 3M company, is a global leader providing dental implant systems

that focus on simplified placement and restorative processes. IMTEC’s quality

dental implant systems include a biomechanically engineered internal hex

implant, ENDURE CL.

The simplicity of the ENDURE system offers clinical advantages to the clinician

and the patient. The clinician has the option to place ENDURE CL implants in a

one-stage or two-stage procedure.

Apron seal designed to minimize micro gap.

3


Mount Free DesignIMTEC has created the ENDURE

CL implant with an advanced

mount-free packaging concept

that transports the implant directly

from the package to the osteotomy

site. This design allows the sterile

implant to be suspended, providing

protection to the enhanced surface

of the implant body.

Simplified Surgical and Prosthetic Protocols

With the ENDURE Internal Hex Implant System, a surgeon may choose the method of placement that best suits the

individual case. Prosthetic options for cementable or screw retained restorations provide ease and simplicity. All

3.5mm and 4.3mm ENDURE CL Implants have the same 4.3mm platform. All 5.1mm ENDURE CL Implants have a

5.1mm platform, designed to mate with the same prosthetic components as the 3.5mm and 4.3mm implant, thereby

eliminating the need for multiple prosthetic parts for implants with varying diameters. The unique apron-sealed

connection provides a precision fit abutment to implant interface. One standard hex driver fits all cover screws,

attachment screws, impression copings and hex driven prosthetic abutments.

Variable PositioningAmong the many advantages of the ENDURE CL Internal Hex Implant System is its ability to be placed at varying

coronal-apical positions. This allows the implant crown to have an emergence profile that achieves the esthetic

demands of the patient and complements the surrounding dentition.

Anatomical DesignThe ENDURE Internal Hex Implant System has been designed with the natural anatomical root form shape in mind.

Each surgical drill is designed to prepare the osteotomy site. This allows the implant to self-tap during insertion and

minimize excessive compression stress to the bone. The ENDURE Implant System incorporates state-of-the-art

enhancements and modifications designed to achieve a successful surgical and prosthetic outcome.

Each ENDURE™ CL implant includes a 0.8mm Cover Screw in the packaging.

Sterile ENDURE CL Implant in vial packaging, sealed with a vial cap.

4


Lengths

9mm

11mm

13mm

15mm

17mm

3.5mm

3509

3511

3513

3515

3517

4.3mm

4309

4311

4313

4315

4317

5.1mm

5109

5111

5113

5115

All 3.5mm and 4.3mm ENDURE CL Implants have the same

4.3mm platform. All 5.1mm ENDURE CL Implants have a 5.1mm

platform. All ENDURE CL Implants include a 0.8mm Cover

Screw. ENDURE CL Implants are manufactured from Grade IV

commercially pure titanium. All prosthetic parts and components

are manufactured from Ti6AI4V ELI.

ENDURE™ CLInternal Hex Implant System

ENDURE CL Implants

0.8mm

4305

4.5mm

4345

6.5mm

4365

8.5mm

4385

3.0mm

4330

Cover Screw & Healing Abutments

0.8mm Cover Screw included

with each ENDURE Implant

5


A variety of impression posts are available to meet your restorative needs.

Impression Posts

Application: The Non-Hexed Closed Tray Impression Post may be used for multiple unit prosthetics.

Item Catalog #

Non-Hexed Closed Tray Impression Post 4545

Hexed Closed Tray Impression PostIncludes a 5052HX Attachment Screw and Plastic Cap. (Transfer Type)

4540

Impression Post ScrewFor open tray impression using item 4540.

5050L

Hexed Open Tray Impression PostIncludes 5050L Impression Post Screw. (Pickup Type)

4542

The hex design provides an exact record of the hex position while taking impressions.

The 5050L Impression Post Screw is used for open tray impressions.

Plastic Cap

4545

5052HXScrew

4542

4540

5050L

5050L

6


5143 5151

5144 5145

Item Catalog #

Lab Analogs

3.5mm/4.3mm Implant Lab Analog 5143

5.1mm Implant Lab Analog 5151

O-Ball Lab Analog 5144

Simplified Shouldered Abutment (SSA) Analog 5145

Item Catalog #

Prosthetic Components

Non-Hexed Prepable Abutment 4500

Hexed Prepable Abutment 4525Includes a 5052HX Attachment Screw

Castable Comfort Cap 5545

Non-Hexed Simplified Shouldered Abutment (SSA) 4645Includes a Castable Comfort Cap. Seated withSSA Abutment Driver on page 15.

Titanium Abutments

4500 4525

5545

4645

5052HX Screw

Castable Comfort Cap included. Also sold separately.

The design of the Hexed Prepable Abutment prevents rotation and provides a stable connection. A 5052HX Screw is included with the Hexed Prepable Abutment.

7


Castable Abutments

Non-Hexed Casting Cylinder (delrin interface) 5645

Hexed Casting Cylinder (delrin interface) 5845

Non-Hexed Casting Cylinder (machined gold interface) 5640

Hexed Casting Cylinder (machined gold interface) 5840

5.1mm Hexed Casting Cylinder (machined gold interface) 5851

A 5052HX Attachment Screw is included with each Castable Abutment.

AttachmentScrew

5052HX

Internal Hex

Titanium DIE Abutments

Hexed DIE AbutmentIncludes Hexed DIE Abutment, 5052HX Screw, Hexed Castable Plastic Sleeve and a Non-Hexed Castable Plastic Sleeve.

Hexed DIE Abutment

5052HXScrew

Complete kit includes:

4615

Hexed Castable Plastic Sleeve for crown

fabrication

Non-Hexed Castable Plastic Sleeve for bridge

fabrication

Item Catalog #

Titanium Angled Abutments

Hexed Angled Abutment (15°)

Hexed Angled Abutment (25°)

1543

2543

5645 5845 5640 5840 5851

Item Catalog #

1543 2543

4615

Item Catalog #

ENDURE™ CL

8


Complete Kit Includes:

0551

0554

5644, 5642 or 5641

Complete Kit Includes:

• O-Ball Abutment (5644, 5642 or 5641)

• Keeper (0554)

• O-Rings (0551), qty. 3

* Complete Titanium O-Ball Abutment Kits:

ENDURE™ CLTitanium O-Ball Abutment Kits & Seating Tool

O-Ball Abutment - 0.5mm Collar (Complete Kit*)

O-Ball Abutment - 2mm Collar (Complete Kit*)

O-Ball Abutment - 4mm Collar (Complete Kit*)

O-Ball Abutment Seating Tool

5641

5642

5644

0500

Item Catalog #

5641 5642

5644 0500

9


Zest Locator Abutments

Locator Core Tool Z8393

Locator Male Processing Package* (2 pack) Z8519-2

Locator Male Processing Package* (10 pack) Z8519-10

Locator Impression Coping (4 pack) Z8505

Locator Female Analog - 4mm diameter (4 pack) Z8530

Locator Female Analog - 5mm diameter (4 pack) Z8516

Locator Replacement Male - clear (4 pack) - ret: 5 lbs Z8524

Locator Light Retention Replacement Male - pink (4 pack) - ret: 3 lbs Z8527

Locator Extra Light Retention Replacement Male - blue (4 pack) - ret: 1.5 lbs Z8529

Locator Extended Range Replacement Male - green (4 pack)‡ Z8547

Locator Extra Light Extended Range Male - red (4 pack) ‡ Z8548

Locator Parallel Post (4 pack) Z8517

Angle Measurement Guide Z9530

Item Catalog #

Zest Locator Attachments

Zest Locator Abutments and components available for use with the ENDURE Internal Hex Implant System.

• Denture Cap with Black Processing Male

• Clear Nylon Male (5 lbs)• Pink Light Retentive• Nylon Male (3 lbs)• Blue Extra-Light Retention

Nylon Male (1.5 lb)• White Block Out Spacer

* Locator Male Processing Package Contents:

‡ For a divergence up to 40º between two implants with a retention of 3-4 lbs (Z8547) or 1.5 lbs (Z8517).

0.63mm Locator Abutment Z8994





Item Catalog #

Z8994 Z8995 Z8996 Z8997 Z8998

10


Bar Clip System

Hader Bar System

Clip Assembly2008*, 2015**

Available in lengths of *8mm and **15mm.

EDS Master Hader Bar Kit

2200

(1) Castable Bar 2120, (2) Attachment Screws 5052HX & (2) Non-Hexed

Casting 5640 Cylinders.

Complete Castable Bar Assembly

2150

ENDURE™ CL Bar Overdenture Systems

Item Lengths Catalog #

Clip AssemblyIncludes 1 Clip, 1 Backplate and 2 Backplate Screws

8mm

15mm

2008

2015

Replacement ClipIncludes 1 Attachment Screw

8mm

15mm

2108

2115

Castable Bar 2120

Complete Castable Bar AssemblyIncludes 1 Castable Bar, 2 Attachment Screws and2 Non-Hexed Casting Cylinders

2150

2120

2108*2115**

Item Catalog #

EDS Master Hader Bar KitIncludes 2 Bars, 6 Final Clips, 6 StainlessSteel Housings and 2 Seating Tools

2200

Yellow Replacement Clips, qty. 6 2206

Stainless Steel Housings, qty. 6 2226

Castable Bars, qty. 6 2220

2206 2226

2220

11


Small 0553C

Medium 0653C

Large 0753C

Castable O-Ball Abutments

Small 0553

Medium 0653

Large 0753

O-Ring Keepers (Stainless Steel)

Small 0554

Medium 0654

Large 0754

Complete Kits

Castable O-Ball Abutments for use with Castable Bars

Nitrile Elastomer O-Rings

O-Rings - Small (black)

O-Rings - Medium (white)

O-Rings - Large (black)

Silicone Elastomer O-Rings

O-Rings - Small (red)

O-Rings - Large (red)

Catalog #Quantity - 1Item

Ball Size

Small

Medium

Large

Ball Diameter

2.0mm

2.5mm

3.0mm

O-Ring Outer Diameter

4.7mm

5.2mm

6.5mm

Castable O-Ball Abutment

O-RingKeeper

Complete Kit includes:

• 3 O-Rings• 1 Keeper• 1 Castable O-Ball Abutment

Catalog #Quantity - 10

Catalog #Quantity - 25

Item Catalog #

0551-01

0651-01

0751-01

0552-01

0752-01

0551-10

0651-10

0751-10

0552-10

0752-10

0551-25

0651-25

0751-25

0552-25

0752-25

12


Locator Drill 2020

2.0mm Irrigated Drill (Outer Ø 2.0mm) 1720E




Irrigated Counterbore 2035E

3.5 Bone Tap 7154E

4.3 Bone Tap 7155E

5.1 Bone Tap 7151E

Irrigated Drill Extender 2000

Implant Finger Driver E9030

Implant Latch Driver E9040

Implant Ratchet Driver E7001

9mm Ratchet Extender 8009

Hand Latch Driver E7002

Ratchet Wrench 8010

1.25mm Swivel Hex Driver (Short) 9024S

1.25mm Swivel Hex Driver 9024

1.25mm Hex Driver (Short) 9025S

1.25mm Hex Driver 9025

1.25mm Handpiece Latch 9019

Depth Gauge (3.5mm) E9007



Paralleling Pins, qty. 3 (1.6mm & 2.0mm) 9000

Paralleling Pins, qty. 3 (3.5mm & 4.3mm) 9003

Titanium Locking Pliers 1030

ENDURE Surgical Box (without instruments) E1351

Recommended Torque values for implant and prosthetic placement.

SSA Abutment Driver (E9045), O-Ball Abutment Driver (0500), and 1.25mm Torque Wrench Attachments (8051 + 8052) sold separately.

Required drill sequence for each diameter of implants.

Recommended RPM for osteotomy drills and bone taps.

Item Catalog # Item Catalog #

ENDURE™ Surgical Kit and Components

ENDURE KIT (Includes ENDURE Surgical Box

and instruments)

13


Item Catalog #

ENDURE™ Surgical Instruments

Locator Drill 2020





Irrigated Counterbore 2035E

3.5mm Bone Tap 7154E



Irrigated Drill Extender 2000

Item Catalog #

2020 1720E 1735E 1743E 1751E 2035E 7154E 7155E 7151E 2000

Paralleling Pins

1.6mm – 2.0mm 9000

3.5mm – 4.3mm 9003

Depth Gauges

3.5mm Depth Gauge E9007



Locking Pliers

Titanium Locking Pliers 1030

9000

9003

E9007

E9008

E90101030

0350*

4000

5000*

3.5mm

4.0mm

5.0mm

Item Catalog #

All tissue punches are disposable.

*not shown

Tissue PunchesDrills & Bone Taps

Surgical Facilitators

14


Implant Finger Driver

Implant Latch Driver

Implant Ratchet Driver

Hand Latch Driver

E9030

E9040

E7001

E7002

Implant Drivers

Item Catalog #

Hex Drivers

1.25mm (Short) 1.25mm

Swivel Hex Drivers

1.25mm (Short) 1.25mm

Torque Wrench Attachments 1.25mm Hextool

1.25mm Hextool (Long)

Handpiece Latch 1.25mm Handpiece Latch

Item Catalog #

Prosthetic Drivers

9025S 9025

9024S 9024

80518052

9019

9025

9024

8052

9019

ENDURE™ Implant & Prosthetic Drivers

The Implant Finger Driver (E9030) can be used to manually advance the ENDURE CL Implant into the osteotomy until increased torque is necessary.

For final seating of the implant, the clinician may choose one of the following instruments:

• E9030 • E9040 • E7002 + E9040 • 8010 + E7001 • 8030 + E7001

To learn more about the use of the ENDURE CL Surgical Prosthetic & Implant Drivers, see pages 19 and 20.

E9030 E9040

E7001

E7002

9025S

9024S

8051

15


Extended Range Adjustable Torque Wrench (20–70 Ncm)

Torque Wrench (20 Ncm)

Torque Wrench Attachments

1.25mm Hextool

1.25mm Hextool (Long)

Complete 20 Ncm Kit Includes 8050, 8051, 8052

8040

8050

8051

8052

8060

8051

8052

8050

E9045 0500 1005

1000

8010

16mm

8016

9mm

8009

E7001

Ratchet Extensions

Complete 20 Ncm Kit

(8060)

Extended RangeAdjustable

Torque Wrench

The Extended Range Adjustable Torque Wrench gives the ability to adjust the torque from 20-70Ncm increments.

Ratchet Wrench & Implant Ratchet Driver

8040

Ratchet Wrench

Implant Ratchet Driver

Ratchet Extensions

9mm

16mm

8010

E7001

8009

8016

Ratchet Wrench SystemsItem Catalog #

Torque Wrench SystemsItem Catalog #

SSA Abutment Driver

O-Ball Abutment Driver

Soft Driver (with tip)

Replacement Tip For soft driver, qty. 5

E9045

0500

1000

1005

Specialty Abutment/Post Drivers

Item Catalog #

16


IMTEC OSSEO+ Cortical Demineralized Bone™

For patients lacking proper bone structure, IMTEC, a 3M Company, now offers

cortical demineralized bone. Cortical demineralized bone is produced for use in

the reconstruction of maxillary or mandibular defects or to assist in regeneration

of bone tissue to maximize the potential for implant success.

To incorporate cortical demineralized bone material into bone regeneration

procedures, mix the bone tissue with the patient’s blood to form a loose paste,

then insert the paste into the required area(s) according to the IMTEC bone/

tissue regeneration protocol.

IMTEC’s OSSEO+ Cortical Demineralized Bone is derived from qualified donors,

free from risk factors and disease according to U.S. FDA guidelines. A multi-

stage processing system is used to ensure the product is pure and free from

contaminates. No foreign substances are added to the material, resulting in the

final product being classified (by the U.S. FDA) as a tissue.

The Processing treatment begins by cleaning cortical bone grafts of adherent tissue. The cleaned grafts are

exposed to a series of solutions listed below and ground to the proper size, .125mm to .850mm particles. The

particles are then exposed to a washing process consisting of a hydrochloric acid bath. The hydrochloric acid bath

reduces the levels of calcium in the tissue to less than eight percent (typically less than 1%), which is recommended

for a high degree of success. Cortical demineralized bone is then packaged, freeze-dried and exposed to gamma

irradiation. Irradiation is performed with the graft in the final package to ensure the highest safety standards are

achieved.

Processing Treatment

• Antibiotics• Hydrogen Peroxide• Alcohol• Sterile water• Allowash®

The patented Allowash Treatment is extremely effective against viruses and bacteria. The technique consists of three different chemicals used to effectively remove cellular elements from musculoskeletal tissue while maintaining structural integrity.

The preparation of bone grafts involves a soaking and rinsing in the following solutions to clean and aid in inhibiting bacterial growth:

17


Tests and Processing Information

IMTEC Cortical Demineralized Bone

Item Size Catalog #

0.5cc OSSP05

1.0cc OSSP10

2.0cc OSSP20

5.0cc OSSP50

The following tests are performed by Community Tissue Services on OSSEO+ :

Serological Tests Performed by Community Tissue Services Required by AATB Required by FDA

Hepatitis B Core Ab Total •

Hepatitis B Surface Ag • • •

Hepatitis C Virus Ab • • •

HIV 1/2 Ab • • •

HTLV-I/II Ab • •

RPR/STS or FTA • •

HIV RNA NAT • •

HCV RNA NAT • •

• As of October 2004, CTS completed HIV RNA NAT and HCV RNA NAT back testing of inventory with

available samples.

• The Gamma Irradiation process performed by the Community Tissue Services is and added step to decrease

potential bacterial and viral risks to the patient.

18


Surgical Protocol for ENDURE™ CL Implants:

A pumping motion should be used when drilling the osteotomy site. This procedure allows the osseous debris to

be cleared from the site. The required drill sequence for each diameter of implant is listed below:

When space allows, insert implant

directly into osteotomy site with vial

cap, turn cap to stabilize, then remove

from top of implant.

If interproximal space is limited, the

clinician may choose to remove the

implant from the vial cap and carry the

implant to the osteotomy site using the

appropriate implant driver from the surgical

kit. In this case, the clinician will use the

Titanium Locking Pliers to remove the

implant from the vial cap and transport the

implant to an implant driver.

4.3mm Implant 5.1mm Implant

1. Locator Drill

2. 2.0mm Irrigated Drill


4. Irrigated Counterbore

5. 3.5mm Bone Tap*

3.5mm Implant

1. Locator Drill




5. 4.3mm Bone Tap*

Implant Drilling Sequence

*Bone taps are only necessary when D1 bone is encountered.

1. Locator Drill





6. 5.1mm Bone Tap*

Implant Site Preparation1

Locator Drill (2020)

Implant Insertion2

Contra AngleAHP-85P

See page 22 for implant handpieces (AHP-85MBC) and (AHP-85P).

19


Option 1 Option 2

The Implant Finger Driver (E9030) can be used to manually advance the ENDURE CL Implant into the osteotomy until increased torque is necessary.

The Contra Angle is connected to the Implant Latch Driver (E9040) for motorized implant placement. IMTEC recommends using a speed of 20-30 RPM and a torque level of 45 Ncm for implant placement.

E9030E9040

Contra AngleAHP-85P

8010

E7001E9040

E7002Option 3

The Hand Latch Driver (E7002) attaches directly to the Implant Latch Driver (E9040) for placement in areas where interproximal space is limited.

The Ratchet Wrench (8010) or Extended Range Adjustable Torque Wrench (8040) can be easily attached to the Hand Latch Driver (E7002) for increased torque during placement.

Option 4

Extended Range Adjustable Torque Wrench (8040)

For final seating of the implant the clinician may choose one of the following:

Instruments used for final seating of ENDURE CL Implants can also be used for initial placement due to retentive

O-Rings on the instruments tip.

See page 22 for implant handpieces (AHP-85MBC) and (AHP-85P).

The Ratchet Wrench (8010) or Extended Range Adjustable Torque Wrench (8040) is connected to the Implant Ratchet Adapter (E7001) for placement where vertical space is limited.

20


By using either the Latch Driver or Finger Driver, the Cover Screw may be easily placed after implant seating.

Any of ENDURE CL’s 1.25mm Hex Drivers may also be used to place Cover Screws and Healing Abutments.

Option 1 Option 2

E9030E9040

The Contra Angle is connected to the Implant Latch Driver (E9040) for motorized Cover Screw or Healing Abutment placement.

The Implant Finger Driver (E9030) can be used to manually place the Cover Screw or Healing Abutment.

Two-Stage Implant PlacementThe 0.8mm Cover Screw has a low, contoured profile

for ease of tissue coverage during the healing phase.

After the healing phase of osseointegration, a Healing

Abutment is then placed during the second stage

surgery.

See page 22 for implant handpiece (AHP-85MBC) and (AHP-85P).

Contra Angle AHP-85P

Healing Stage for ENDURE™ CL Implants3

One-Stage Implant PlacementHealing Abutments are available in heights of 3.0mm,

4.5mm, 6.5mm and 8.5mm. A healing abutment equal to

or slightly greater than the soft tissue depth is placed for a

one-stage surgery in order to avoid a second surgery.

21


Restorative ENDURE™ CL Implant ProtocolUsing the Simplified Shoulder Abutment (4645) with the option for immediate temporization.

Stone model Stone model

SSA AbutmentDriver (E9045)

Placement of AbutmentThe Non-Hexed Simplified Shoulder Abutment

(4645) is placed with the SSA Driver (E9045). Final

seating is accomplished with the Torque or Ratchet

Wrench.

1 Impression ProcedureCrown and Bridge standard impression techniques

record the implant position

as well as the

pre-prepped

implant

abutment.

2

Casting of Stone ModelThe Simplified Shoulder Abutment Analog (5145)

Analog is securely snapped into the impression and

poured in stone.

3 Fabrication of CrownThe abutments are ready for Crown and Bridge

wax up and casting.

4

Seating of CrownsThe implant crowns are fabricated utilizing standard

laboratory techniques. This eliminates the need for

transfer abutments and multiple retention screws. The

final Crown and Bridge restoration is then cemented

to the SSA.

5

22


Implant Motor, Handpieces & Accessories

• Powerful, brushless 40,000 RPM autoclavable micromotor

• Variable handpiece ratio selection: 1:5 and 1:2 increaser, 1:1, and 20:1 reduction E-type handpieces

• Adjustable torque up to 60 Ncm enables a single, high-efficiency 20:1 reduction handpiece (AHP-85MBC) to be used for the complete implant procedure

• Advanced calibration technology for accurate speed and torque performance

• Selectable auto-stop function when desired torque setting is reached

• Intuitive keypad with adjustable handpiece ratio, speed, torque and irrigation flow settings

• Contemporary design with easy clean surfaces large and bright easy-to-read display

Implant & Oral Surgery System

Features:

Includes AE-70V Variable Speed Foot Control with Pump On/Off, Micromotor Direction, Preset Selection and Torque Cycle buttons.

1/20 Reduction Contra Angle

Mont Blanc 1/20 Contra Angle with Adjustable Depth Stop

Aseptispray*Necessary to clean and lubricate handpieces

* not shown

AHP-85P

AHP-85MBC

AHP-09

Implant Contra Angle handpiece which accepts D-latch implant

burs. Ideal for osteotomies, tapping and threading. 800-1200 RPM

for drilling an osteotomy and under 30 RPM for placing implants.

• Fully integrated, easy-load irrigation pump

• Six programmable preset buttons for storing and labeling custom settings in memory

• Autoclavable motor holder may be free-standing or mounted to either side of the console

• Upgradable software for a longer return on investment

• Standard tubing set accepts standard irrigation bags; optional tubing set accommodates rigid irrigation bottles

• Auto-sensing global voltage compatibility

• FDA, UL and CE compliant

• Made in the USA

Item Catalog #

AHP-85P AHP-85MBC

Implant & Oral Surgery System

Variable Speed Foot Control

AEU-7000IM

AE-70V

Item Catalog #

23


Prosthetic FlowchartENDURE™ CL Implants3.5mm, 4.3mm & 5.1mm

Attachment Screw

Cover Screw andHealing Abutments

ENDURE CL Implants

24


Notes

25


Technical/Clinical Assistance International clinicians should contact an authorized IMTEC distributor or the company at www.imtec.com

• Telephone orders are accepted at:

800-879-9799 or 580-223-4456

• Customer Service fax numbers:

800-986-9574 or 580-223-4561

• Office Hours are 8:00 AM – 6:00 PM

Monday-Friday Central Standard Time

• Technical Assistance:

800-879-9799 or 580-223-4456

IMTEC®, ENDURE™ Internal Hex Implant System and LEXATITE™ are trademarks of IMTEC, a 3M Company.

All rights reserved.

Central Standard Time

Orders placed after 3:30 PM Central Standard Time will

be processed the following business day.

• All major credit cards accepted

• All prices are subject to change without

notice

• All graphics are by way of illustration only

(Not responsible for typographical errors)

• For more information online please visit

www.imtec.com

PM052 Rev09

IMTEC Corporate OfficeIMTEC PLAZA

2401 North Commerce

Ardmore, Oklahoma 73401, USA

Tel: 580-223-4456

Toll Free: 800-879-9799

Fax: 800-986-9574 U.S.

Fax: 580-223-4561 International

IMTEC Latinoamérica, S.A. DE C.V.Rio Mayo 1219

Col. Vista Hermosa

Cuernavaca, Morelos

Mexico 62290

Tel: +52-(01)-777-316-4464

Toll Free: 01-800-006-4464

Fax: +52-(01)-777-316-0790

IMTEC United Kingdom Ltd.23 Clement Drive

Crewe, Cheshire CW13GN

Tel: +44-844-800-8983

Fax: +44-781-391-1372

IMTEC Canada155 Romina Drive

City of Vaughan, Ontario L4K 4Z9

Tel: 905-660-1838

Toll Free: 800-226-3220

Fax: 905-660-1905

IMTEC Los AlamosHYTEC Technology Center

110 Eastgate Drive

Los Alamos, New Mexico 87544, USA

Tel: 505-661-3000

Fax: 505-662-5179

IMTEC Europa, GmbHDornbachstraße 30

61440 Oberursel

Germany

Tel: +49 6171 88798-27

Toll Free: 00800 46833-000

Fax: +49 6171 88798-20

Endure CL Product Catalog · PDF fileAmong the many advantages of the ENDURE CL Internal Hex...

Documents

Transcript of Endure CL Product Catalog · PDF fileAmong the many advantages of the ENDURE CL Internal Hex...