ENCAP ENCAP SYSTEMSSYSTEMS“Encapsulating and

Protecting building systems for a stronger tomorrow”

www.theencapgroup.com

www.encapseal.com

INDUSTRY QUANDARIES

STUCCO IMPROPERLY APPLIED NO VAPOR BARRIERCRACKED STUCCO/BRICK/

CONCRETE WALLS ROOFING COVERING MATERIALS ELEVATED SLABS BASEMENT WALLS DAMPNESS

MULTI FAMILY & COMMERCIAL STANDARD PROBLEMS ARE WATER INTRUSIONS

THRU:

INDUSTRY QUANDARIES CONT’D

• More durable and cost effective than any of the other thirteen EPA approved systems of lead based paint encapsulation

• Water resistant, but it allows the sub-strait to dry behind the coating

• Extensive positive performance record for the past 30 years

INDUSTRY QUANDARIES CONT’D

• Safe Product – easily applied

• Eight standard colors

• Extreme adhesive to most surfaces

• Dries to 4500 PSI

COMPETITIVE ADVANTAGES

Only Cementitious based coating system in the US approved by the Health Departments and the EPA in all 50 States More cost effective than traditional stucco applications Moisture resistant and allows for breathability Extensive positive track record and testimonials Moisture curing capabilities Easy application process Extensive color pallet Extreme adhesion and compaction strength

Past Performance Dewberry & Davis Study Andros Island Navy Sub Base Patuxten Naval Air Station Ohio Adjutant General Army New Haven Court House

Authority Oakland Housing Authority Patrick Air Force Base Veteran’s Hospital-

Oakland,CA Veteran’s Hospital- Vieira, FL

Veterans Hospital, Orlando, FLF.D.O.TTyndall Air BaseGreater Orlando Aviation AuthorityOrlando Expressway AuthorityVirgin Islands Port Authority/ Marine & AirFederal Emergency Management AgencyHomestead Air BaseFt. Myer, Arlington, VAOrlando Utilities Commission,

Orlando, FL

Potential Projects

• Enviro Tubes

• Gabion Baskets

EnviroTubes

Enviro -Tubes currently deployed, shoreline protection and wetland re-nourishment systems.

Currently for Enviro -Tube protection, we are the only manufacturer of a coating system that “significantly” adherers to the petroleum based Bag Fabric.

Gabion Baskets

The Encap Group, LLC

U.S. ARMY CORPS OF ENGINEERS (USACE)

TEMPORARY FLOOD PROTECTION

• SYSTEMS DEGRADATION

Examples of Past Performance

Wall Repair

The Encap Group, LLC

BRICK RESTORATION/ENCAPSULATION

Bethune Cookman College, Dayton Beach, FL

The Encap Group, LLC

ENCAP SEAL

Water Intrusion Test

ASTM 1601

The Encap Group, LLC

RESULTS

.083 Gallons/ hour intrusion

(.375 Gallons/ hour intrusion considered excellent)

The Encap Group, LLC

Asbestos&

Lead

The Encap Group, LLC

Historical Renovation/Preservation

Lead Abatement/Encapsulation

• Preserves a historical building’s appearance while abating the lead

based paint or asbestos wall cladding

EXAMPLES OF PRODUCT USEWATER PROOFING ON WALLS AND ROOFS

OUC Water Storage Tank,Lake Highland Orlando, FL

Encap Seal was applied as a roof coating this water Tank.

Allowing heavy lift crane to traverse without damage to The coating.

As a water proof coating on concrete /stucco walls

PRODUCT SPECS Environmentally friendly Designed to encapsulate lead based

paint

Encapsulates some forms of asbestos

Adheres to most sub-straits Encap Seal achieves maximum

strength of 4500 PSI in 28 days Pro-Tec-Coat achieves maximum

strength of 6000 PSI in 28 days

NAICS CODES:

236115, 236117, 236220, 237310, 238350, 238990, 238110, 238140, 238310, 238340, 238910, 321114, 337110, 321911, 332323, 325510, 541310, 541320, 561790, 561730, 541620, 562910.

COMPETITIVE ADVANTAGESComparison Study of Landing and Patio water proofing systems

Products/ properties SONOGUARDVULKEM 350/351 ENCAP SEAL

Product base/ make up Polyurethane/paint Polyurethane/paint Cementitious/mortarBonds to smooth surfaces no no Extremely wellLevel of surface prep required extensive extensive- moderate minorWater proofer yes yes yesAllows for water vapor release no no yesAvailable colors standard/limited standard/limited standard/unlimitedInstalled applications 3 parts 2 parts 1 part

Tensile strength/ASTM C-780/D-412 752 320530 PSI w/o fabric. W/ fabric exceeds 2500psi

Compressive strengths N/A 2200psi 4500psiAdhesion/ peal strengths 275psi 30psi 406 psiColor application topical applied through-out through-outslip resistance topical applied sand topical applied sand product finish & textureMoisture curing yes no yes

bridging limitations 1/16" max 1/16" max1/2" or < w/o mesh

1/2" or> w/ meshPackaging/ coverage 50-80 sqft/gallon 40 & 100 sqft/gallon 40sqft/50lb bagapplication thickness 25/25/20 wet mills 40 & 15 wet mills 1/8"-1/4" min.abrasion resistance ASTM D-4060 1000 cycles 1000 cycles exceeds 1000 cyclesWeatherization/ UV exposure N/A N/A ImperviousWarranty N/A on product only 5 years L&M

Application RisksCombustible liquid and

VaporCombustible liquid and

Vapor noneRequires maintenance agreement for warranty Yes n/a NoCan be Pressure washed No No Yesdamaged by sharp objects, sand, gravel metal yes yes no

Storage/shelf life1 year/with proper

storage n/aUnlimited w/proper

storageClean up Reducer 990 or xylene Reducer 990 or xylene water

Manufacturers: BASF® Tremko, IndustriesThe Encap Group, LLC

The Chemical company    

ENCAP ENCAP SYSTEMSSYSTEMS

THE BEGINNING